{"annotations": [{"start_s": 0.0, "end_s": 8.845, "action": "Opened and interacted with the desktop context menu, then clicked the taskbar search area to switch toward Windows Explorer/Search.", "intent": "Navigate the desktop and begin searching for an application.", "app": "Windows desktop", "details": "The desktop context menu was visible with options including Refresh, Display settings, and Personalize."}, {"start_s": 8.845, "end_s": 19.269, "action": "Opened Windows Search, typed \u201caut,\u201d selected the AutoCAD 2021 - English result, and dragged within the search interface before clicking again.", "intent": "Locate the AutoCAD application from Windows Search.", "app": "Windows Search", "details": "Search results showed AutoCAD 2021 - English as the best match, with recent drawing files listed."}, {"start_s": 19.269, "end_s": 27.907, "action": "Continued interacting with the AutoCAD search result and dragged across the search pane, leaving AutoCAD 2021 - English selected.", "intent": "Inspect or prepare the AutoCAD launch result.", "app": "Windows Search", "details": "The AutoCAD result and recent drawing list remained visible."}, {"start_s": 27.907, "end_s": 38.165, "action": "Clicked the selected AutoCAD result to expand its available actions, then clicked near the upper-right area of the search pane.", "intent": "Review launch options for AutoCAD.", "app": "Windows Search", "details": "Options included Open, Run as administrator, Open file location, Pin to Start, Pin to taskbar, and Uninstall."}, {"start_s": 38.165, "end_s": 51.465, "action": "Opened the Search pane\u2019s More menu, browsed its categories, and continued clicking and dragging within the AutoCAD search results.", "intent": "Continue managing the AutoCAD search result before launching it.", "app": "Windows Search", "details": "The More menu displayed Folders, Photos, Settings, and Videos."}, {"start_s": 51.465, "end_s": 60.948, "action": "Launched AutoCAD 2021; the application initialization splash screen appeared while Search and Windows Explorer briefly switched in the background.", "intent": "Start AutoCAD 2021.", "app": "AutoCAD 2021", "details": "The Autodesk AutoCAD 2021 splash screen showed \u201cInitializing...\u201d with a progress bar."}, {"start_s": 60.948, "end_s": 65.77, "action": "Switched through the YouTube and AutoCAD jump lists, brought AutoCAD 2021 to the foreground, then clicked the taskbar area to switch toward Windows Explorer.", "intent": "Switch between open applications.", "app": "Windows Shell Experience Host / AutoCAD / Windows Explorer", "details": "AutoCAD\u2019s recent-files jump list was visible before the switch."}, {"start_s": 65.77, "end_s": 74.798, "action": "Brought AutoCAD 2021 forward, moved and resized its window repeatedly while it loaded, then clicked and dragged within the application.", "intent": "Prepare and interact with the AutoCAD window.", "app": "AutoCAD 2021", "details": "AutoCAD remained on its loading screen during the visible evidence."}, {"start_s": 74.798, "end_s": 91.104, "action": "Switched from Windows Explorer back to AutoCAD, which opened Drawing1.dwg on the gridded model canvas, then began entering a command with the letter b.", "intent": "Open or continue working in an AutoCAD drawing.", "app": "AutoCAD 2021", "details": "The title changed to Autodesk AutoCAD 2021 - [Drawing1.dwg]."}, {"start_s": 91.104, "end_s": 111.104, "action": "Entered additional characters into AutoCAD\u2019s dynamic input near the crosshair, leaving an unfinished text string visible while the drawing canvas remained otherwise unchanged.", "intent": "Enter or edit an AutoCAD command.", "app": "AutoCAD 2021", "details": "The recorded input included 9*+-- followed by hyphens; no completed drawing operation was visible."}, {"start_s": 111.104, "end_s": 122.81, "action": "Paused in AutoCAD with the unfinished dynamic-input string still visible, then clicked near the upper-left screen edge with the right and middle mouse buttons.", "intent": "Continue interacting with the AutoCAD workspace.", "app": "AutoCAD 2021", "details": "No visible drawing change resulted from the recorded clicks."}, {"start_s": 122.81, "end_s": 132.368, "action": "Switched toward Windows Explorer and performed repeated dragging and scrolling near the screen edges, then right-clicked near the upper-left corner; a desktop context menu appeared with Open, Empty Recycle Bin, Pin to Start, Create shortcut, Rename, and Properties.", "intent": "Interact with desktop or shell controls while AutoCAD remains visible.", "app": "Windows Explorer / Windows Shell", "details": "The context menu was associated with the Recycle Bin area, while AutoCAD\u2019s drawing remained visible behind it."}, {"start_s": 132.368, "end_s": 145.941, "action": "Returned to the AutoCAD drawing, briefly scrolled, and then hid or switched away from the application before a right-click/drag near the drawing area.", "intent": "Navigate the drawing workspace and switch application visibility.", "app": "Autodesk AutoCAD 2021", "details": "The drawing canvas was blank with the grid visible in the sampled frame."}, {"start_s": 145.941, "end_s": 151.641, "action": "Activated AutoCAD, right-clicked in the drawing area, canceled the active state with Escape, and entered text beginning with \u201cop\u201d in the command line.", "intent": "Open an AutoCAD command or settings dialog.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed grid-off status and later contained the partial command text \u201cop\u201d."}, {"start_s": 151.641, "end_s": 158.088, "action": "Opened the AutoCAD Options dialog, clicked within its settings, and clicked the Apply and OK controls.", "intent": "Review or modify AutoCAD application settings.", "app": "Autodesk AutoCAD 2021", "details": "The Options dialog was visible on the Open and Save tab; the sampled frame shows Apply and OK buttons."}, {"start_s": 158.088, "end_s": 163.028, "action": "Closed the Options dialog, canceled several command states, and typed \u201clog\u201d into the dynamic command input, which displayed matching suggestions such as LOGFILEON and LOGFILENAME.", "intent": "Search for or invoke a logging-related AutoCAD command.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input suggestions were visible near the cursor."}, {"start_s": 163.028, "end_s": 170.319, "action": "Canceled the command and cleared the dynamic input by pressing Escape repeatedly, leaving the blank drawing canvas and command line idle.", "intent": "Dismiss the command suggestions and return to the drawing workspace.", "app": "Autodesk AutoCAD 2021", "details": "Several \u201cCommand: *Cancel*\u201d messages were visible."}, {"start_s": 170.319, "end_s": 183.165, "action": "Entered the units command and opened the Drawing Units dialog; changed the insertion scale from Millimeters to Inches and clicked OK.", "intent": "Configure drawing units and insertion scale.", "app": "Autodesk AutoCAD 2021", "details": "The Drawing Units dialog showed Engineering length units, Decimal Degrees angles, and Inches selected for inserted content."}, {"start_s": 183.165, "end_s": 188.373, "action": "Pressed Escape repeatedly to cancel active AutoCAD commands, then typed \u201cd\u201d to begin another command.", "intent": "Reset the command state and start a dimension-related command.", "app": "AutoCAD", "details": null}, {"start_s": 188.373, "end_s": 198.623, "action": "Opened the Dimension Style Manager, selected the ISO-25 style, and opened its modification dialog on the Symbols and Arrows tab.", "intent": "Edit the ISO-25 dimension style settings.", "app": "AutoCAD", "details": "The Modify Dimension Style: ISO-25 dialog is visible."}, {"start_s": 198.623, "end_s": 214.675, "action": "Switched through dimension-style tabs, adjusted the arrow size field to 4.5, and clicked OK to apply the changes.", "intent": "Customize and save the ISO-25 dimension style appearance.", "app": "AutoCAD", "details": "The dialog shows Arrow size set to 4.5 before confirmation."}, {"start_s": 214.675, "end_s": 221.161, "action": "Closed the dimension-style dialogs, returned to the drawing canvas, and pressed Escape repeatedly to cancel the active command state.", "intent": "Finish the dimension-style edit and return to drawing mode.", "app": "AutoCAD", "details": null}, {"start_s": 221.161, "end_s": 227.808, "action": "Typed command fragments with dynamic input, entered XL/XLINE, and specified a point to begin a construction line; then pressed Escape to cancel.", "intent": "Attempt to create an XLINE construction line.", "app": "AutoCAD", "details": "Dynamic input shows XL (XLINE) and a \u201cSpecify through point\u201d prompt."}, {"start_s": 227.808, "end_s": 232.281, "action": "Re-entered XL/XLINE through dynamic input, selected the command, and positioned the cursor while AutoCAD prompted for a through point.", "intent": "Retry creating an XLINE construction line.", "app": "AutoCAD", "details": "The XLINE command remains active at the end with a through-point prompt."}, {"start_s": 232.281, "end_s": 248.667, "action": "Waited in AutoCAD with the blank drawing visible; the application window was moved or resized near the end of the interval, and a WhatsApp notification appeared.", "intent": "Remain in the current drawing while the desktop window layout changed.", "app": "Autodesk AutoCAD 2021", "details": "System memory pressure was recorded."}, {"start_s": 248.667, "end_s": 268.667, "action": "Remained idle in the AutoCAD Drawing1.dwg model space with no recorded interaction.", "intent": "Continue viewing the current drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 268.667, "end_s": 288.667, "action": "Remained idle in the AutoCAD model space with the blank drawing view unchanged.", "intent": "Continue viewing the current drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 288.667, "end_s": 308.667, "action": "Remained idle in AutoCAD while the blank model-space view stayed unchanged.", "intent": "Continue viewing the current drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 308.667, "end_s": 328.667, "action": "Remained idle in AutoCAD with no recorded interaction or visible drawing changes.", "intent": "Continue viewing the current drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 328.667, "end_s": 348.667, "action": "Resumed after a brief idle period while system network, power, input-source, and display settings changed; a desktop context menu was visible over AutoCAD, and the window was moved near the end.", "intent": "Remain in the AutoCAD workspace while system configuration changed.", "app": "Autodesk AutoCAD 2021", "details": "The context menu included View, Sort by, Refresh, Undo Move, Intel Graphics Settings, New, Display settings, and Personalize."}, {"start_s": 348.667, "end_s": 368.667, "action": "Remained idle with the Windows context menu open over the AutoCAD drawing workspace.", "intent": "No active interaction was recorded.", "app": "AutoCAD", "details": null}, {"start_s": 368.667, "end_s": 388.667, "action": "Remained idle while the Windows context menu stayed open over the blank AutoCAD drawing.", "intent": "No active interaction was recorded.", "app": "AutoCAD", "details": null}, {"start_s": 388.667, "end_s": 406.109, "action": "Changed the visible interface state, closing the context menu and leaving the AutoCAD drawing workspace exposed.", "intent": "Returned focus to the AutoCAD workspace.", "app": "AutoCAD", "details": "The window title subsequently showed \u201cSearch.\u201d"}, {"start_s": 406.109, "end_s": 426.109, "action": "Opened the Windows Start menu over AutoCAD and left it displayed.", "intent": "Browsed available applications or system controls.", "app": "Windows Start menu", "details": "AutoCAD remained visible behind the Start menu."}, {"start_s": 426.109, "end_s": 430.144, "action": "Selected AutoCAD to return to the drawing, then pressed Escape repeatedly to cancel or clear any active command state.", "intent": "Restore AutoCAD focus and reset the command line.", "app": "AutoCAD", "details": null}, {"start_s": 430.144, "end_s": 450.144, "action": "Remained idle in the AutoCAD model-space view with a blank drawing canvas and crosshair visible.", "intent": "No active interaction was recorded.", "app": "AutoCAD", "details": null}, {"start_s": 450.144, "end_s": 470.144, "action": "Remained idle in the AutoCAD drawing; the system resumed and reported configuration, network, power-source, input-source, and memory-state changes near the end of the span.", "intent": "Maintain the open drawing while the system state changed.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 470.144, "end_s": 482.472, "action": "Scrolled slightly in the blank drawing area, then pressed Escape several times to cancel or clear active input.", "intent": "Dismiss active AutoCAD commands or prompts.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 482.472, "end_s": 501.276, "action": "Opened the AutoCAD context menu, moved across its options, and repeatedly pressed Escape to dismiss menus and cancel commands; left-clicked and middle-clicked in the drawing area, then typed \u201co\u201d to begin a command.", "intent": "Navigate AutoCAD commands and return to command-line operation.", "app": "Autodesk AutoCAD 2021", "details": "The context menu visibly included Repeat XLINE, Clipboard, Isolate, Pan, Zoom, Quick Select, and Options."}, {"start_s": 501.276, "end_s": 507.34, "action": "Returned focus to the AutoCAD drawing window, resized and moved the application window, and entered the OFFSET command until the prompt requested an offset distance, showing the Through option.", "intent": "Start an offset operation in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The dynamic input prompt displayed \u201cSpecify offset distance or\u201d with \u201cThrough\u201d available."}, {"start_s": 507.34, "end_s": 517.72, "action": "Entered an offset distance of 11, then clicked repeatedly in the drawing area while AutoCAD advanced to the \u201cSelect object to offset\u201d prompt.", "intent": "Set the offset distance and select geometry for the OFFSET command.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with distance 11 and then requested an object selection."}, {"start_s": 517.72, "end_s": 536.992, "action": "Clicked in the drawing area, pressed Escape repeatedly to cancel the pending object selection and active commands, and left the blank drawing view at the command prompt.", "intent": "Cancel the unfinished offset operation.", "app": "Autodesk AutoCAD 2021", "details": "The command line ended with multiple \u201c*Cancel*\u201d entries."}, {"start_s": 536.992, "end_s": 547.112, "action": "Opened and resized AutoCAD, then clicked in the drawing while the OFFSET command prompted for an object to offset.", "intent": "Continue an offset operation in the drawing.", "app": "AutoCAD", "details": "The command line showed an offset distance of 11'-6\" and prompted to select an object."}, {"start_s": 547.112, "end_s": 551.2, "action": "Clicked the drawing and positioned the cursor to specify the side for the offset; the selected horizontal line was highlighted.", "intent": "Specify the side on which to create the offset.", "app": "AutoCAD", "details": "OFFSET remained active and displayed the side-selection prompt."}, {"start_s": 551.2, "end_s": 564.925, "action": "Moved the cursor and clicked or dragged near the highlighted horizontal line while AutoCAD continued prompting for the offset side.", "intent": "Place another offset of the selected geometry.", "app": "AutoCAD", "details": "The dynamic input continued to show 11'-6\" and the side-selection prompt."}, {"start_s": 564.925, "end_s": 584.523, "action": "Clicked and navigated around the drawing, then pressed Escape repeatedly to cancel the active offset interaction.", "intent": "Cancel the offset attempt and return to an idle command state.", "app": "AutoCAD", "details": "The command line ended with repeated Cancel messages and the drawing remained visible."}, {"start_s": 584.523, "end_s": 594.036, "action": "Activated AutoCAD and left the OFFSET command at the offset-distance prompt, with 11'-6\" visible in the dynamic input field.", "intent": "Resume or configure the offset operation.", "app": "AutoCAD", "details": "The command line showed current OFFSET settings and requested an offset distance."}, {"start_s": 594.036, "end_s": 600.859, "action": "Edited the dynamic offset-distance field with backspaces and typed additional characters while the OFFSET prompt remained active.", "intent": "Modify the offset distance input.", "app": "AutoCAD", "details": "The visible input field was being edited; no completed offset was shown."}, {"start_s": 600.859, "end_s": 604.999, "action": "Activated AutoCAD and entered numeric input into the active OFFSET command, leaving the command at a distance prompt.", "intent": "Set an offset distance.", "app": "AutoCAD", "details": "The drawing remained visible with OFFSET prompts and dynamic input."}, {"start_s": 604.999, "end_s": 609.127, "action": "Entered an offset distance of 10', clicked to choose the side for the offset, then pressed Escape repeatedly to cancel the command.", "intent": "Attempt an offset operation and cancel it.", "app": "AutoCAD", "details": "The command line ended at repeated Cancel messages."}, {"start_s": 609.127, "end_s": 619.245, "action": "Entered another offset distance, selected points on the drawing, then canceled the active OFFSET operation and navigated the view with scroll and middle-button actions.", "intent": "Attempt another offset and adjust the drawing view.", "app": "AutoCAD", "details": "OFFSET prompts were visible; no completed modification was confirmed."}, {"start_s": 619.245, "end_s": 624.783, "action": "Entered a trim-related command, clicked in the drawing, and pressed Escape repeatedly to cancel the selection and command.", "intent": "Attempt a trimming operation and cancel it.", "app": "AutoCAD", "details": "The command line showed a trim selection prompt followed by Cancel messages."}, {"start_s": 624.783, "end_s": 642.675, "action": "Entered and edited a numeric OFFSET distance, leaving AutoCAD at the prompt to specify the offset distance.", "intent": "Prepare an offset distance for a drawing operation.", "app": "AutoCAD", "details": "The visible OFFSET prompt showed an entered value of 12'."}, {"start_s": 642.675, "end_s": 651.247, "action": "Confirmed the 12'-6\" offset distance, selected drawing geometry, indicated a side for the offset, and continued interacting with the OFFSET command before pressing Escape repeatedly.", "intent": "Create an offset from selected drawing geometry.", "app": "AutoCAD", "details": "The command remained active at a side-selection prompt; completion was not confirmed."}, {"start_s": 651.247, "end_s": 669.567, "action": "Activated AutoCAD, manipulated the drawing view with extensive dragging and middle-clicks, and repeatedly pressed Esc to cancel the active TRIM command and related prompts.", "intent": "Cancel the current editing operation and adjust the drawing view.", "app": "AutoCAD 2021", "details": "The command line showed TRIM and then multiple Command: *Cancel* entries."}, {"start_s": 669.567, "end_s": 677.638, "action": "Continued canceling active AutoCAD prompts with Esc, middle-clicking in the drawing, and leaving the OFFSET command at its offset-distance prompt.", "intent": "Clear prior commands and prepare or continue an offset operation.", "app": "AutoCAD 2021", "details": "The visible prompt requested an offset distance and showed Command: *Cancel* entries."}, {"start_s": 677.638, "end_s": 690.927, "action": "Pressed Esc repeatedly to cancel the active operation and adjusted the drawing view, leaving the displayed rectangular line layout without an active command.", "intent": "Exit the current AutoCAD operation and return to the drawing.", "app": "AutoCAD 2021", "details": "The command line displayed repeated cancellations."}, {"start_s": 690.927, "end_s": 698.504, "action": "Activated the OFFSET command and scrolled or adjusted the view while the dynamic input requested an offset distance; entered 3 near the end of the span.", "intent": "Set an offset distance for the drawing geometry.", "app": "AutoCAD 2021", "details": "The visible dynamic input showed an offset-distance field with an existing value before the final numeric entry."}, {"start_s": 698.504, "end_s": 707.028, "action": "Entered 30 as the offset distance, selected a horizontal line, and clicked a side to offset it, producing a highlighted vertical offset line while OFFSET remained active.", "intent": "Create an offset copy of the selected drawing line at distance 30.", "app": "AutoCAD 2021", "details": "The command line confirmed the distance 30 and prompted for the side on which to offset."}, {"start_s": 707.028, "end_s": 715.557, "action": "Entered 50 as another offset distance, selected and offset additional geometry with clicks, then pressed Esc repeatedly to cancel and leave the OFFSET command.", "intent": "Create another offset feature and finish the offset operation.", "app": "AutoCAD 2021", "details": "The drawing ended with added vertical geometry and Command: *Cancel* entries."}, {"start_s": 715.557, "end_s": 722.363, "action": "Resized and repositioned AutoCAD, entered an offset distance of 30, and left the OFFSET command awaiting object selection.", "intent": "Set an offset distance for the active drawing command.", "app": "AutoCAD", "details": "Drawing1.dwg showed OFFSET with distance 30."}, {"start_s": 722.363, "end_s": 732.224, "action": "Clicked in the drawing while OFFSET prompted for an object, then pressed Escape repeatedly to cancel the active command and return to the command prompt.", "intent": "Attempt the offset operation and cancel it.", "app": "AutoCAD", "details": "The command history showed repeated Cancel entries."}, {"start_s": 732.224, "end_s": 749.952, "action": "Pressed Escape repeatedly while AutoCAD remained on the drawing, then began switching toward Windows Explorer at the end of the span.", "intent": "Clear active AutoCAD commands and transition applications.", "app": "AutoCAD", "details": null}, {"start_s": 749.952, "end_s": 767.976, "action": "Returned to AutoCAD, entered another offset distance prompt, clicked and navigated within the drawing, and repeatedly canceled the command while the view shifted.", "intent": "Continue or adjust an offset operation in the drawing.", "app": "AutoCAD", "details": "OFFSET was visible with a distance prompt and later remained active."}, {"start_s": 767.976, "end_s": 775.389, "action": "Entered a command beginning with \u201cr\u201d, clicked and dragged in the drawing, then interacted with the geometry and canceled; AutoCAD displayed a TRIM prompt before further cancellation.", "intent": "Modify drawing geometry using a trim-related command.", "app": "AutoCAD", "details": "The visible prompt was \u201cSelect object to trim or shift-select to extend or\u201d."}, {"start_s": 775.389, "end_s": 784.014, "action": "Returned to AutoCAD, pressed Escape to cancel the remaining OFFSET state, then clicked and scrolled in the drawing and canceled again.", "intent": "Clear the active command and leave the drawing idle.", "app": "AutoCAD", "details": "The command area showed OFFSET distance 30 followed by Cancel."}, {"start_s": 784.014, "end_s": 790.552, "action": "Activated AutoCAD and entered offset-distance values while the OFFSET command remained active; clicked in the drawing, then pressed Escape to cancel or reset the command.", "intent": "Set or adjust an offset distance and prepare to select geometry.", "app": "AutoCAD", "details": "Drawing1.dwg showed a rectangular grid; the command prompt progressed from specifying offset distance to selecting an object."}, {"start_s": 790.552, "end_s": 794.572, "action": "Entered another offset-distance value, clicked the drawing, and pressed Escape repeatedly until AutoCAD returned to an idle command state.", "intent": "Attempt an offset operation and cancel it.", "app": "AutoCAD", "details": "The OFFSET prompt showed a distance of 3 and then returned to repeated Command: *Cancel* messages."}, {"start_s": 794.572, "end_s": 804.189, "action": "Entered an offset distance of 2, selected a vertical line, and clicked to specify the offset side; then used middle-click navigation and pressed Escape to end the operation.", "intent": "Offset a selected grid line by the entered distance.", "app": "AutoCAD", "details": "A blue vertical line was selected and the prompt requested the point on the side to offset."}, {"start_s": 804.189, "end_s": 823.481, "action": "Pressed Escape repeatedly to clear active commands, used middle-click navigation and scrolling over the drawing, and briefly switched to Windows Explorer before returning to AutoCAD.", "intent": "Cancel pending operations and inspect or reposition the drawing view.", "app": "AutoCAD", "details": "The grid view remained visible while command prompts showed repeated cancellations."}, {"start_s": 823.481, "end_s": 828.816, "action": "Activated AutoCAD's OFFSET command and entered an offset distance of 3 feet 6 inches.", "intent": "Set the next offset distance for a drawing modification.", "app": "AutoCAD", "details": "The dynamic input prompt displayed 3' and the command history showed the entered value as 3'6\"."}, {"start_s": 828.816, "end_s": 833.068, "action": "Selected a horizontal grid line and clicked to specify the side for the 3-foot-6-inch offset, then pressed Escape to stop the command.", "intent": "Create an offset copy of the selected horizontal line.", "app": "AutoCAD", "details": "The selected line was highlighted blue and the prompt requested the point on the side to offset."}, {"start_s": 833.068, "end_s": 844.073, "action": "Entered an offset distance and selected a horizontal line for offsetting, then pressed Escape repeatedly to cancel the active command.", "intent": "Create or adjust a parallel line with the OFFSET command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained in the OFFSET workflow before cancellation."}, {"start_s": 844.073, "end_s": 851.325, "action": "Entered an offset distance, selected horizontal drawing geometry, and attempted additional selections before pressing Escape repeatedly to exit.", "intent": "Offset selected drawing lines by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt was visible and the drawing showed added parallel horizontal geometry."}, {"start_s": 851.325, "end_s": 871.325, "action": "Started the TRIM command and left it active while the drawing view remained unchanged; network status changes occurred during the interval.", "intent": "Prepare to trim or extend drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed TRIM and prompted for an object to trim."}, {"start_s": 871.325, "end_s": 881.242, "action": "Navigated the drawing view with middle-button clicks and pressed Escape several times while the TRIM command remained active.", "intent": "Work within or cancel the active TRIM operation.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained visible and the view shifted slightly."}, {"start_s": 881.242, "end_s": 892.424, "action": "Used middle-button clicks to navigate across the drawing and repeatedly pressed Escape, leaving the command line at a canceled state.", "intent": "Review the drawing and exit active editing commands.", "app": "Autodesk AutoCAD 2021", "details": "The command history showed repeated *Cancel* entries."}, {"start_s": 892.424, "end_s": 897.449, "action": "Started TRIM again, clicked drawing geometry to specify fence points or objects, and pressed Escape repeatedly, ending with the command canceled.", "intent": "Trim selected portions of the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt was visible before cancellation."}, {"start_s": 897.449, "end_s": 911.285, "action": "Activated AutoCAD, interacted with the drawing while TRIM was active, and repeatedly pressed Escape to cancel the command and return to an idle command line.", "intent": "Cancel the active trimming operation.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible; no clear geometry change was confirmed."}, {"start_s": 911.285, "end_s": 920.001, "action": "Entered the DIMLINEAR command, selected points in the drawing, and left AutoCAD prompting for the second extension-line origin before canceling the operation.", "intent": "Create a linear dimension between drawing points.", "app": "AutoCAD", "details": "The drawing view remained visible with a WhatsApp notification overlay."}, {"start_s": 920.001, "end_s": 929.128, "action": "Continued the active OFFSET command, entered an offset distance of 1'-6\", selected a horizontal line, and positioned the offset before canceling the command.", "intent": "Create an offset copy of a horizontal drawing line.", "app": "AutoCAD", "details": "Several parallel horizontal lines were visible after the operation."}, {"start_s": 929.128, "end_s": 941.019, "action": "Reactivated TRIM and scrolled the AutoCAD drawing view while leaving the command at the prompt to select an object to trim or extend.", "intent": "Prepare to trim geometry in the drawing.", "app": "AutoCAD", "details": "No definite trim selection or geometry modification was confirmed."}, {"start_s": 941.019, "end_s": 956.265, "action": "Selected multiple locations and fence points while TRIM was active, used middle-click navigation and scrolling, then pressed Escape repeatedly to cancel the ongoing selections.", "intent": "Trim selected portions of the drawing and exit the command.", "app": "AutoCAD", "details": "The drawing retained multiple parallel horizontal lines; the command was canceled at the end."}, {"start_s": 956.265, "end_s": 966.266, "action": "Started the LINE command and moved the cursor across the drawing while AutoCAD continued prompting for the first point.", "intent": "Begin drawing a new line.", "app": "AutoCAD", "details": "No first point was confirmed before the span ended."}, {"start_s": 966.266, "end_s": 978.94, "action": "Resized and repositioned the AutoCAD window repeatedly, then interacted with the active LINE command and pressed Escape several times.", "intent": "Continue or cancel line drawing while adjusting the workspace.", "app": "AutoCAD", "details": "The drawing remains visible with LINE prompting for a first or next point."}, {"start_s": 978.94, "end_s": 987.579, "action": "Entered an offset distance of 2, selected near the drawing geometry, and pressed Escape repeatedly to exit the OFFSET operation.", "intent": "Create or attempt a 2-unit offset of existing geometry.", "app": "AutoCAD", "details": "OFFSET shows Erase mode and ends at the object-selection prompt after cancellation."}, {"start_s": 987.579, "end_s": 995.593, "action": "Entered an offset distance of 3, selected the geometry, and specified a side for the offset before cancelling the command with repeated Escape presses.", "intent": "Create or attempt a 3-unit offset of the line.", "app": "AutoCAD", "details": "The OFFSET command prompts for the side to offset, then returns to an idle command state."}, {"start_s": 995.593, "end_s": 1000.76, "action": "Entered an offset distance of 3'6\", selected and interacted with the line geometry, then cancelled the OFFSET command.", "intent": "Create or attempt an offset using the entered architectural distance.", "app": "AutoCAD", "details": "The drawing shows the original and nearby offset linework after the operation is cancelled."}, {"start_s": 1000.76, "end_s": 1009.401, "action": "Entered a TRIM command, selected or attempted to trim the drawing geometry, then cancelled and returned to the TRIM object-selection prompt.", "intent": "Trim portions of the visible linework.", "app": "AutoCAD", "details": "TRIM is active with cutting edges crossing and Project/UCS settings visible."}, {"start_s": 1009.401, "end_s": 1014.412, "action": "Cancelled the active TRIM operation with repeated Escape presses and used middle-click navigation on the drawing area.", "intent": "Exit the trimming workflow and adjust the view or navigation state.", "app": "AutoCAD", "details": "The drawing remains visible with the command line showing cancelled commands."}, {"start_s": 1014.412, "end_s": 1030.51, "action": "Activated AutoCAD, interacted with the drawing using clicks and drags, then repeatedly pressed Escape to cancel active commands.", "intent": "Modify or inspect drawing geometry and clear unfinished commands.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible; the command line showed repeated '*Cancel*' entries."}, {"start_s": 1030.51, "end_s": 1042.57, "action": "Started the LINE command and positioned the cursor to define points, then pressed Escape repeatedly to cancel it.", "intent": "Attempt to add line geometry in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed 'Specify first point' and later 'Specify next point or [Undo]:'."}, {"start_s": 1042.57, "end_s": 1047.485, "action": "Reactivated the LINE command, positioned the cursor at a new drawing location, and canceled the command with Escape.", "intent": "Attempt another line-drawing operation.", "app": "AutoCAD", "details": "The command line and dynamic input showed 'LINE' and 'Specify first point'."}, {"start_s": 1047.485, "end_s": 1056.468, "action": "Started TRIM, clicked drawing geometry, then canceled the operation and used middle-button navigation gestures.", "intent": "Trim or inspect existing drawing geometry.", "app": "AutoCAD", "details": "TRIM displayed 'Select object to trim or shift-select to extend'; the final view showed adjusted linework near the intersection."}, {"start_s": 1056.468, "end_s": 1069.497, "action": "Worked in the LINE command with cursor positioning and clicks, then pressed Escape repeatedly; the view shifted to another area of the drawing.", "intent": "Attempt to create additional line geometry.", "app": "AutoCAD", "details": "Dynamic input showed 'Specify next point or [Undo]:' before the command was canceled."}, {"start_s": 1069.497, "end_s": 1075.529, "action": "Entered an edit command, clicked near the right-side line intersection, and continued the EXTEND operation after canceling prior commands.", "intent": "Extend existing drawing geometry to a boundary.", "app": "AutoCAD", "details": "The command line showed EXTEND and 'Specify next fence point or [Undo]:'; a blue highlighted line appeared along the lower horizontal edge."}, {"start_s": 1075.529, "end_s": 1085.298, "action": "Activated AutoCAD\u2019s TRIM command, clicked and dragged across drawing geometry, and navigated the view while the command remained active.", "intent": "Trim or modify intersecting drawing edges.", "app": "AutoCAD 2021", "details": "The command line prompted to select objects to trim; additional clicks and an 'e' entry followed."}, {"start_s": 1085.298, "end_s": 1089.374, "action": "Entered an invalid selection while TRIM was active, then pressed Escape repeatedly to cancel the command and return to an idle command line.", "intent": "Exit the unsuccessful trim operation.", "app": "AutoCAD 2021", "details": "The command line displayed '*Invalid selection*' before multiple cancellations."}, {"start_s": 1089.374, "end_s": 1093.609, "action": "Entered another selection attempt, clicked drawing geometry, and pressed Escape repeatedly while AutoCAD continued prompting for objects to extend or trim.", "intent": "Attempt another edge modification and cancel it if unsuccessful.", "app": "AutoCAD 2021", "details": "The TRIM prompt changed to selecting objects to extend or shift-select to trim."}, {"start_s": 1093.609, "end_s": 1103.537, "action": "Restarted TRIM, clicked and dragged extensively across the drawing, and used middle-button navigation and scrolling while the command continued prompting for the next fence point.", "intent": "Trim multiple portions of the drawing using a fence selection.", "app": "AutoCAD 2021", "details": "The view shifted and the command line showed repeated 'Specify next fence point' prompts."}, {"start_s": 1103.537, "end_s": 1119.009, "action": "Continued fence-style TRIM selection with a long drag and additional navigation clicks, then pressed Escape repeatedly to cancel the active operation.", "intent": "Continue and then abandon the ongoing trim selection.", "app": "AutoCAD 2021", "details": "The drawing view changed substantially; the command line ended with repeated '*Cancel*' entries."}, {"start_s": 1119.009, "end_s": 1134.789, "action": "Restarted TRIM, dragged across the lower drawing geometry, navigated and scrolled the view, then pressed Escape repeatedly while the command remained in selection mode.", "intent": "Perform another trim attempt on visible drawing edges.", "app": "AutoCAD 2021", "details": "The command line alternated between selecting objects and specifying the next fence point; no completed edit is clearly confirmed."}, {"start_s": 1134.789, "end_s": 1142.477, "action": "Resized and repositioned the AutoCAD window, entered the OFFSET command with a distance of 9, interacted with the drawing, and pressed Escape repeatedly to cancel the active command.", "intent": "Attempt to offset drawing geometry and then cancel the operation.", "app": "AutoCAD", "details": "The command line ended with multiple Cancel messages."}, {"start_s": 1142.477, "end_s": 1152.051, "action": "Entered the TRIM command, selected and navigated around drawing geometry with clicks, middle-button actions, and scrolling, and left TRIM active awaiting an object selection.", "intent": "Trim portions of the drawing geometry.", "app": "AutoCAD", "details": "The visible prompt asked to select an object to trim or shift-select to extend."}, {"start_s": 1152.051, "end_s": 1159.88, "action": "Continued navigating the drawing with middle-button clicks and scrolling, then clicked near the geometry while the TRIM command remained active.", "intent": "Inspect and attempt to select geometry for trimming.", "app": "AutoCAD", "details": "No completed trim result is visibly confirmed."}, {"start_s": 1159.88, "end_s": 1171.113, "action": "Remained in AutoCAD with the TRIM prompt active while the view stayed on the drawing; a WhatsApp notification appeared over the lower-right corner.", "intent": "Wait while reviewing the active drawing command and its geometry.", "app": "AutoCAD", "details": "The notification reported six unread WhatsApp messages."}, {"start_s": 1171.113, "end_s": 1191.113, "action": "Stayed idle in AutoCAD with the TRIM command still awaiting an object selection and no visible drawing interaction.", "intent": "Pause or review the drawing before continuing the trim operation.", "app": "AutoCAD", "details": "Memory pressure was reported during the interval."}, {"start_s": 1191.113, "end_s": 1198.234, "action": "Navigated and clicked in the drawing, pressed Escape to cancel prior command states, then initiated a window selection by specifying an opposite corner and left the selection prompt active.", "intent": "Cancel the unfinished trim operation and begin selecting drawing objects.", "app": "AutoCAD", "details": "The command line showed repeated Cancel messages followed by \u201cSpecify opposite corner or [Fence/WPolygon/CPolygon]\u201d."}, {"start_s": 1198.234, "end_s": 1211.889, "action": "Switched to AutoCAD and navigated the drawing with middle-button clicks and scrolling, leaving the model view centered on the outlined geometry.", "intent": "Inspect or reposition the drawing view.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 1211.889, "end_s": 1221.614, "action": "Entered and continued the TRIM command, clicked within the drawing, and left AutoCAD prompting to select an object to trim or shift-select to extend.", "intent": "Modify or trim drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt visibly shows TRIM and \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 1221.614, "end_s": 1233.755, "action": "Clicked in the drawing and pressed Escape repeatedly to cancel the active command and clear the command state; the view remained on the same outlined geometry.", "intent": "Cancel the active editing operation.", "app": "Autodesk AutoCAD 2021", "details": "The command history shows repeated \u201c*Cancel*\u201d entries."}, {"start_s": 1233.755, "end_s": 1237.961, "action": "Returned focus to AutoCAD, pressed Escape several times, and clicked near the drawing; a Windows notification briefly appeared afterward.", "intent": "Dismiss pending commands and continue working in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The visible command area includes \u201cSpecify first point\u201d followed by cancellation entries."}, {"start_s": 1237.961, "end_s": 1249.66, "action": "Clicked and dragged in the lower-right drawing area, creating or adjusting a blue rectangular selection window around part of the geometry; a WhatsApp notification overlay appeared.", "intent": "Select a region or objects in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "AutoCAD prompts for the opposite corner while the selection window is visible."}, {"start_s": 1249.66, "end_s": 1269.66, "action": "Remained in AutoCAD with the rectangular selection window active and the cursor positioned near its lower-right corner; no further interaction was recorded.", "intent": "Wait or review the current selection state.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt continues to ask for the opposite corner."}, {"start_s": 1269.66, "end_s": 1274.484, "action": "Resumed AutoCAD, accepted brief typed input, and resized the application window while the drawing remained visible.", "intent": "Continue working in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "Network, power, display, and memory state changes were also detected."}, {"start_s": 1274.484, "end_s": 1283.639, "action": "Activated AutoCAD and repeatedly moved or resized its dynamic-input windows. Clicked in the drawing to run the MOVE command, selected a base point, and pressed Escape several times while the command prompt remained active.", "intent": "Modify the position of drawing geometry using MOVE.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed MOVE and prompts for base and second points."}, {"start_s": 1283.639, "end_s": 1292.064, "action": "Entered command shortcuts, canceled several active operations, then initiated TRIM and clicked drawing geometry to select or trim objects.", "intent": "Trim selected portions of the drawing and adjust geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed repeated Cancel messages followed by TRIM prompts."}, {"start_s": 1292.064, "end_s": 1300.165, "action": "Entered another command shortcut, clicked and dragged across the drawing, and switched between TRIM and EXTEND operations while selecting geometry; a WhatsApp notification appeared over the lower-right corner.", "intent": "Refine line geometry by trimming or extending objects.", "app": "Autodesk AutoCAD 2021", "details": "The command prompts showed EXTEND and then TRIM; no WhatsApp interaction was recorded."}, {"start_s": 1300.165, "end_s": 1310.421, "action": "Continued the active TRIM command and left the drawing showing a long outlined horizontal feature within the larger layout.", "intent": "Continue trimming drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "The prompt requested the next fence point or an object to trim."}, {"start_s": 1310.421, "end_s": 1330.421, "action": "Waited with AutoCAD open and the TRIM command still active, leaving the drawing and command prompt unchanged.", "intent": "Pause while reviewing or preparing the next trim selection.", "app": "Autodesk AutoCAD 2021", "details": "System power, display, and memory state changes occurred during the otherwise inactive interval."}, {"start_s": 1330.421, "end_s": 1338.59, "action": "Moved the AutoCAD window and clicked within the drawing while the TRIM command remained active, with prompts requesting objects to trim or extend.", "intent": "Modify drawing geometry using the active TRIM command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view remained on a wireframe shape and the command line showed TRIM prompts."}, {"start_s": 1338.59, "end_s": 1346.923, "action": "Pressed Escape repeatedly to cancel the active TRIM operation, scrolled or repositioned the view, and clicked within the drawing.", "intent": "Exit the unfinished trim operation and return AutoCAD to an idle command state.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed multiple *Cancel* entries and returned to the command prompt."}, {"start_s": 1346.923, "end_s": 1359.695, "action": "Pressed Escape repeatedly and allowed the AutoCAD view to remain open while a WhatsApp notification appeared.", "intent": "Dismiss active AutoCAD states and review the unchanged drawing view.", "app": "Autodesk AutoCAD 2021", "details": "A WhatsApp notification reported unread messages; no confirmed drawing edit was visible."}, {"start_s": 1359.695, "end_s": 1379.695, "action": "Waited with the AutoCAD drawing open while the WhatsApp notification remained visible.", "intent": "Pause while keeping the drawing available for further work.", "app": "Autodesk AutoCAD 2021", "details": "No drawing interaction occurred during this interval."}, {"start_s": 1379.695, "end_s": 1396.386, "action": "Pressed Escape several times and clicked in the drawing, dismissing the notification and leaving the wireframe geometry visible.", "intent": "Clear pending AutoCAD commands and restore focus to the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line continued to show canceled commands; a final character entry occurred near the span boundary."}, {"start_s": 1396.386, "end_s": 1404.182, "action": "Switched back into AutoCAD, entered the OFFSET command, clicked the drawing geometry, and entered an offset distance of 1 while the command remained active.", "intent": "Create an offset of selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET and prompted for offset distance; the dynamic input displayed 1."}, {"start_s": 1404.182, "end_s": 1410.682, "action": "Activated AutoCAD and alternated between EXTEND and TRIM commands, selecting points on the drawing and canceling the active operations.", "intent": "Modify intersecting drawing geometry by extending or trimming lines.", "app": "Autodesk AutoCAD 2021", "details": "The command prompts show EXTEND followed by TRIM; several Esc presses canceled the commands."}, {"start_s": 1410.682, "end_s": 1414.975, "action": "Selected points in the drawing while an OFFSET command was active, then canceled the operation and returned to the command line.", "intent": "Attempt to offset a drawing element.", "app": "Autodesk AutoCAD 2021", "details": "The prompt requested an offset distance and a point on the side to offset; the operation was canceled."}, {"start_s": 1414.975, "end_s": 1421.278, "action": "Selected geometry for TRIM, canceled and restarted the command, then clicked additional drawing points and canceled again while the view changed to show more of the layout.", "intent": "Trim and inspect drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained visible before repeated cancellations and navigation clicks."}, {"start_s": 1421.278, "end_s": 1441.278, "action": "Remained idle in AutoCAD with the drawing view unchanged and no visible command interaction.", "intent": "Pause while reviewing the current drawing view.", "app": "Autodesk AutoCAD 2021", "details": "Only a window movement and memory-pressure event were recorded."}, {"start_s": 1441.278, "end_s": 1459.539, "action": "Navigated the drawing with middle-clicks and scrolls, canceled transient commands, and left the view centered on the lower portion of the outlined geometry.", "intent": "Review or reposition the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The span includes a brief idle period and system configuration changes; no completed edit is visible."}, {"start_s": 1459.539, "end_s": 1467.143, "action": "Started the LINE command and moved the cursor to specify a first point, canceling and restarting the command during repeated window resizing.", "intent": "Begin drawing a line segment.", "app": "Autodesk AutoCAD 2021", "details": "The command line and dynamic input both show LINE with \u201cSpecify first point\u201d; no line was completed."}, {"start_s": 1467.143, "end_s": 1474.615, "action": "Activated AutoCAD, entered the DIMLINEAR command, clicked near the left end of the drawing, and canceled the unfinished dimension operation.", "intent": "Attempt to place a linear dimension on the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt ended with repeated Cancel messages and no new dimension visible."}, {"start_s": 1474.615, "end_s": 1486.525, "action": "Started DIMLINEAR, selected two points along the left-side geometry, and positioned a vertical dimension reading 1'-6\" before canceling the command.", "intent": "Add a vertical linear dimension to the left-side geometry.", "app": "Autodesk AutoCAD 2021", "details": "A temporary 1'-6\" dimension was visible during the operation; the final view showed no dimension annotation."}, {"start_s": 1486.525, "end_s": 1495.827, "action": "Entered an offset distance of 1'-6\", selected the left slanted edge, and attempted to place an offset before canceling the OFFSET command.", "intent": "Create a parallel offset from the left slanted edge.", "app": "Autodesk AutoCAD 2021", "details": "The left slanted edge was highlighted during OFFSET, but no offset remained after cancellation."}, {"start_s": 1495.827, "end_s": 1502.798, "action": "Started the LINE command and clicked points in the left section of the drawing, leaving a line preview active before canceling.", "intent": "Draw a line segment across the left-side geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt progressed from Specify first point to Specify next point; the final visible drawing did not retain the attempted line."}, {"start_s": 1502.798, "end_s": 1508.615, "action": "Started OFFSET, entered 1'-8\", selected a horizontal line in the left section, and continued to the object-selection prompt before canceling.", "intent": "Create an offset of the selected horizontal line.", "app": "Autodesk AutoCAD 2021", "details": "The offset distance field showed 1'-8\" and the command ended at Select object to offset."}, {"start_s": 1508.615, "end_s": 1518.743, "action": "Started EXTEND, selected geometry near the left end, then used the TRIM command and clicked several locations while the view zoomed out; canceled the active trimming operation.", "intent": "Adjust the left-side geometry by extending and trimming edges.", "app": "Autodesk AutoCAD 2021", "details": "The final view was zoomed out and the command prompt remained at Select object to trim or shift-select to extend."}, {"start_s": 1518.743, "end_s": 1523.797, "action": "Clicked repeatedly around the drawing and pressed Escape several times to cancel active commands.", "intent": "Cancel or exit active AutoCAD operations.", "app": "Autodesk AutoCAD 2021", "details": "Drawing remained visible with the command line showing canceled commands."}, {"start_s": 1523.797, "end_s": 1536.638, "action": "Pressed Escape repeatedly and briefly scrolled, leaving the drawing view slightly repositioned.", "intent": "Clear active commands and adjust the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The command line continued to show canceled commands; no new geometry was visibly created."}, {"start_s": 1536.638, "end_s": 1543.774, "action": "Clicked and scrolled around the drawing, then pressed Escape repeatedly to cancel the current interaction.", "intent": "Navigate the drawing and stop an active command.", "app": "Autodesk AutoCAD 2021", "details": "The long horizontal outlined object remained visible while the view changed."}, {"start_s": 1543.774, "end_s": 1562.12, "action": "Clicked and dragged around the drawing, repeatedly resizing or moving the AutoCAD window; returned to AutoCAD and typed a command character.", "intent": "Restore and manipulate the AutoCAD window while continuing drawing work.", "app": "Autodesk AutoCAD 2021", "details": "The window was repeatedly reduced and expanded; the outlined object was later shown selected."}, {"start_s": 1562.12, "end_s": 1571.976, "action": "Typed a command prefix and selected COPY from the AutoCAD suggestions; began the COPY command with the outlined object selected and a base-point prompt displayed.", "intent": "Copy the selected outlined drawing object.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed \u201cCOPY 14 found\u201d and prompted for a base point or displacement."}, {"start_s": 1571.976, "end_s": 1590.322, "action": "Continued the COPY operation, clicked and dragged to specify placement, and left a second copy preview or selection visible above the original.", "intent": "Place a duplicate of the selected outlined object in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line prompted for the second point; the original and copied geometry were visible at different vertical positions."}, {"start_s": 1590.322, "end_s": 1600.396, "action": "Adjusted the AutoCAD window repeatedly and navigated the drawing while MOVE remained active for 14 selected objects; positioned the cursor to specify a base point, then middle-clicked in the drawing.", "intent": "Continue positioning selected drawing geometry with the MOVE command.", "app": "AutoCAD", "details": "The dynamic input prompt requested a base point; no completed move is visible."}, {"start_s": 1600.396, "end_s": 1610.9, "action": "Navigated the drawing and pressed Escape repeatedly to cancel the active MOVE operation and related prompts; left the command line showing canceled commands, then typed m.", "intent": "Cancel the unfinished move and prepare another command.", "app": "AutoCAD", "details": "The selected geometry was no longer highlighted after cancellation."}, {"start_s": 1610.9, "end_s": 1614.968, "action": "Activated MOVE, selected objects by dragging a window across the upper outlined shape, and left the command waiting for the opposite corner.", "intent": "Select the upper drawing geometry for repositioning.", "app": "AutoCAD", "details": "The selection window was blue and the prompt read \u201cSpecify opposite corner.\u201d"}, {"start_s": 1614.968, "end_s": 1630.738, "action": "Continued the MOVE workflow by selecting the upper geometry and attempting to specify a base point or displacement; pressed Escape repeatedly to cancel the operation and typed o to start another command.", "intent": "Reposition selected geometry, then abandon the unfinished operation.", "app": "AutoCAD", "details": "The command history shows selection of 14 objects followed by cancellation; no final displacement is visible."}, {"start_s": 1630.738, "end_s": 1638.735, "action": "Started OFFSET, entered an offset distance of 3, selected or targeted a vertical line, and then canceled the command with Escape.", "intent": "Create an offset copy of selected drawing geometry.", "app": "AutoCAD", "details": "The OFFSET prompt was active and displayed the entered distance 3 before cancellation."}, {"start_s": 1638.735, "end_s": 1642.982, "action": "Started OFFSET again and entered 5 as the offset distance, leaving AutoCAD at the offset-distance prompt.", "intent": "Set up another offset operation on the drawing.", "app": "AutoCAD", "details": "The dynamic input field visibly contains 5; no object selection or offset completion is shown."}, {"start_s": 1642.982, "end_s": 1647.98, "action": "Activated AutoCAD and repeatedly clicked near the right side of the drawing while the OFFSET command remained active, then pressed Escape several times.", "intent": "Cancel or reset the active offset operation.", "app": "AutoCAD 2021", "details": "The command line showed OFFSET waiting to select an object."}, {"start_s": 1647.98, "end_s": 1654.257, "action": "Entered an offset distance of 4, clicked near the right side of the drawing, and then canceled the offset sequence with repeated Escape presses.", "intent": "Attempt to offset a drawing element by a specified distance.", "app": "AutoCAD 2021", "details": "OFFSET accepted the visible value 4 and returned to selecting an object."}, {"start_s": 1654.257, "end_s": 1659.164, "action": "Started EXTEND, clicked and dragged around the right ends of the upper geometry, then pressed Escape repeatedly to cancel the operation.", "intent": "Extend selected drawing edges to nearby boundaries.", "app": "AutoCAD 2021", "details": "The command line displayed EXTEND and requested the next fence point."}, {"start_s": 1659.164, "end_s": 1667.186, "action": "Continued clicking around the upper and lower linework during an extend operation, then pressed Escape repeatedly until the command was canceled.", "intent": "Attempt to extend or modify multiple line segments.", "app": "AutoCAD 2021", "details": "The drawing remained visible with the command prompt alternating between object selection and cancellation."}, {"start_s": 1667.186, "end_s": 1677.544, "action": "Entered TRIM, zoomed or panned the drawing, and clicked and dragged across several line segments to trim them.", "intent": "Trim portions of the drawing geometry.", "app": "AutoCAD 2021", "details": "The command line showed TRIM with the prompt to select objects to trim or extend."}, {"start_s": 1677.544, "end_s": 1687.95, "action": "Panned the drawing with middle-button interactions and continued clicking near the linework while TRIM remained active.", "intent": "Review the drawing and continue trimming geometry.", "app": "AutoCAD 2021", "details": "The view shifted, and the TRIM selection prompt remained visible."}, {"start_s": 1687.95, "end_s": 1707.063, "action": "Adjusted the AutoCAD window and interacted with the drawing while the TRIM command prompted for fence points; pressed Escape repeatedly to cancel the active command.", "intent": "Modify drawing geometry using TRIM and then exit the command.", "app": "AutoCAD", "details": "The drawing remained in model space and the command line ended with repeated cancellation messages."}, {"start_s": 1707.063, "end_s": 1724.934, "action": "Selected an object and initiated MOVE, specified a base point, and dragged the selected geometry toward a new position; pressed Escape repeatedly while the command remained active.", "intent": "Reposition a drawing element with the MOVE command.", "app": "AutoCAD", "details": "The command line showed one object found and prompted for the second point or displacement."}, {"start_s": 1724.934, "end_s": 1729.946, "action": "Entered and activated EXTEND, selected or dragged across a drawing edge, and then pressed Escape repeatedly to end the command.", "intent": "Extend a line or edge to a boundary in the drawing.", "app": "AutoCAD", "details": "The command line showed EXTEND prompting for the next fence point before cancellation."}, {"start_s": 1729.946, "end_s": 1735.443, "action": "Started OFFSET, entered an offset distance of 1'6\", and left the command prompting for an object to offset; pressed Escape to cancel subsequent operations.", "intent": "Create an offset copy of a selected drawing edge.", "app": "AutoCAD", "details": "The OFFSET prompt visibly showed the entered distance and the Select object to offset prompt."}, {"start_s": 1735.443, "end_s": 1739.458, "action": "Activated EXTEND and selected a diagonal edge near the right end of the outlined geometry, then pressed Escape to stop the operation.", "intent": "Extend or adjust the selected diagonal drawing edge.", "app": "AutoCAD", "details": "The command line prompted to select an object to extend or shift-select to trim."}, {"start_s": 1739.458, "end_s": 1759.171, "action": "Activated TRIM and made extensive drag and selection interactions across the drawing, then pressed Escape repeatedly; navigated the view with middle-button clicks and scrolling, ending with the drawing shown at a zoomed-out view.", "intent": "Trim drawing geometry and review the resulting layout.", "app": "AutoCAD", "details": "The TRIM command remained active initially; the later view showed two long outlined elements within a larger rectangular layout."}, {"start_s": 1759.171, "end_s": 1764.816, "action": "Activated AutoCAD, selected points in the drawing, and continued a LINE command with dynamic input; pressed Escape repeatedly to cancel active prompts.", "intent": "Continue drawing geometry and cancel an unfinished line operation.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open with the LINE command showing first- and next-point prompts."}, {"start_s": 1764.816, "end_s": 1772.652, "action": "Selected drawing geometry, canceled active commands, and dragged across the drawing area; left a vertical edge selected with blue grips before starting another command.", "intent": "Inspect or modify existing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view changed position and ended with a selected vertical segment and command-line cancellation messages."}, {"start_s": 1772.652, "end_s": 1778.432, "action": "Zoomed or navigated the drawing with middle-click and scroll gestures, then pressed Escape several times and invoked ERASE, leaving the view zoomed out with two horizontal elements visible.", "intent": "Remove or prepare to remove a drawing element.", "app": "Autodesk AutoCAD 2021", "details": "The command history showed ERASE 1 found."}, {"start_s": 1778.432, "end_s": 1785.726, "action": "Entered an offset distance, selected drawing geometry, and attempted additional selections and drags; canceled the active OFFSET operation with Escape.", "intent": "Create or adjust an offset element in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "OFFSET prompts requested a distance and then an object to offset."}, {"start_s": 1785.726, "end_s": 1793.118, "action": "Activated EXTEND, selected near the left end of the drawing, and canceled the command after attempting to extend geometry.", "intent": "Extend existing linework to nearby boundaries.", "app": "Autodesk AutoCAD 2021", "details": "EXTEND displayed a prompt to select an object to extend or trim."}, {"start_s": 1793.118, "end_s": 1797.366, "action": "Started a LINE command, clicked a point, and moved the cursor with orthogonal tracking and dynamic distance input; pressed Escape to cancel the unfinished line.", "intent": "Add a horizontal line segment to the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed an orthogonal 180-degree line preview before cancellation."}, {"start_s": 1797.366, "end_s": 1804.015, "action": "Activated AutoCAD, canceled active prompts, and clicked and dragged around the left end of the drawing; left a slanted segment selected with blue grips.", "intent": "Adjust or inspect geometry at the left end of the drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; repeated Escape presses canceled commands."}, {"start_s": 1804.015, "end_s": 1808.752, "action": "Canceled the current command, selected and manipulated another slanted segment near the left end, then canceled again, leaving the geometry unselected.", "intent": "Modify or inspect the left-side linework.", "app": "AutoCAD", "details": "The command history showed repeated cancellations and a selection-window prompt."}, {"start_s": 1808.752, "end_s": 1813.22, "action": "Started the EXTEND command, clicked several boundary and line locations around the left end, and canceled the operation after adjusting the nearby linework.", "intent": "Extend selected drawing elements to surrounding boundaries.", "app": "AutoCAD", "details": "The prompt explicitly displayed EXTEND and requested an object to extend or trim."}, {"start_s": 1813.22, "end_s": 1818.07, "action": "Started TRIM, clicked linework near the left end of the drawing, and canceled the trim operation.", "intent": "Trim intersecting or excess linework in the left-side detail.", "app": "AutoCAD", "details": "The prompt explicitly displayed TRIM and requested an object to trim or extend."}, {"start_s": 1818.07, "end_s": 1825.152, "action": "Entered an offset distance of 19, selected a slanted segment, and attempted an offset; then canceled and selected the segment again, leaving it highlighted with grips.", "intent": "Create or adjust a parallel offset of the slanted segment.", "app": "AutoCAD", "details": "The OFFSET prompt showed a distance value of 19; the final view showed the slanted segment selected."}, {"start_s": 1825.152, "end_s": 1831.236, "action": "Canceled the prior selection, started OFFSET again, and entered an offset distance of 1, leaving AutoCAD waiting for the object to offset.", "intent": "Offset a drawing line by a specified distance.", "app": "AutoCAD", "details": "The final prompt displayed \u201cSpecify offset distance\u201d with 1 entered; no offset object selection was completed."}, {"start_s": 1831.236, "end_s": 1839.54, "action": "Repositioned and resized the AutoCAD window, clicked around the left end of the drawing, and repeatedly pressed Escape while leaving a line selected.", "intent": "Adjust the AutoCAD view and cancel or reset active commands.", "app": "AutoCAD", "details": "The drawing remained visible in Model space; a slanted line was selected near the left end at the end of the span."}, {"start_s": 1839.54, "end_s": 1844.235, "action": "Entered and canceled several AutoCAD command inputs, then typed numeric values while the OFFSET prompt was active.", "intent": "Attempt to set an offset distance or continue an offset operation.", "app": "AutoCAD", "details": "The command line showed OFFSET and prompted for an offset distance; the value 2 was visible in the dynamic input near the end."}, {"start_s": 1844.235, "end_s": 1850.348, "action": "Clicked and dragged near the left end of the drawing, entered command text including an apparent explode command, and canceled active operations.", "intent": "Modify or inspect geometry near the left end of the drawing.", "app": "AutoCAD", "details": "The visible geometry changed from a selected slanted line to a set of unselected linework, with canceled-command messages shown."}, {"start_s": 1850.348, "end_s": 1857.689, "action": "Started TRIM, selected or attempted to trim geometry near the left end, and navigated the drawing with middle-button clicks and scrolling.", "intent": "Trim the drawing and reposition the view.", "app": "AutoCAD", "details": "The TRIM prompt remained active, asking to select an object to trim or shift-select to extend; the view was panned or zoomed to show more of the drawing."}, {"start_s": 1857.689, "end_s": 1873.671, "action": "Panned or zoomed the AutoCAD view and resized the application window, bringing the overall drawing into view; then clicked near the drawing and typed a command character.", "intent": "Review the drawing at a broader scale and prepare another command.", "app": "AutoCAD", "details": "The evidence showed a zoomed-out rectangular structure with two long horizontal elements; command activity was not clearly identifiable."}, {"start_s": 1873.671, "end_s": 1883.779, "action": "Entered the COPY command, selected a group of linework, and began specifying a base point while moving the selected geometry.", "intent": "Copy the selected drawing elements to another location.", "app": "AutoCAD", "details": "The command line showed COPY, reported 18 objects found, and prompted for a base point; dynamic input displayed cursor coordinates."}, {"start_s": 1883.779, "end_s": 1892.875, "action": "Continued the active COPY command, selected and positioned repeated drawing elements, and navigated the view while leaving the command awaiting another second point.", "intent": "Create multiple copies of a selected CAD element.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed COPY with multiple-copy mode and a second-point prompt."}, {"start_s": 1892.875, "end_s": 1904.645, "action": "Adjusted the view and continued interacting with the active COPY operation, then pressed Escape repeatedly to cancel it and return to an idle command line.", "intent": "Finish or cancel the repeated-copy operation and inspect the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing ended with repeated horizontal elements visible and command history showing Cancel."}, {"start_s": 1904.645, "end_s": 1914.855, "action": "Entered the TRIM command, zoomed and panned around the repeated elements, and selected geometry for trimming while the command remained active.", "intent": "Trim or extend drawing geometry around the repeated elements.", "app": "Autodesk AutoCAD 2021", "details": "The prompt displayed \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 1914.855, "end_s": 1926.139, "action": "Continued panning and zooming through the drawing and issued additional selections within the active TRIM command.", "intent": "Refine trimming selections across the drawing.", "app": "Autodesk AutoCAD 2021", "details": "TRIM remained active with repeated select-object prompts visible."}, {"start_s": 1926.139, "end_s": 1936.405, "action": "Navigated the AutoCAD view and performed extended drag-based selection or trimming interactions across several horizontal elements.", "intent": "Modify or trim selected portions of the repeated CAD geometry.", "app": "Autodesk AutoCAD 2021", "details": "The view was zoomed in on horizontal elements while TRIM prompts remained visible."}, {"start_s": 1936.405, "end_s": 1946.303, "action": "Continued dragging and selecting geometry while panning across the drawing, leaving the TRIM command active at the select-object prompt.", "intent": "Continue trimming or extending the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed zoomed horizontal elements and the prompt to select an object to trim or shift-select to extend."}, {"start_s": 1946.303, "end_s": 1953.531, "action": "Adjusted the AutoCAD view with middle-button navigation and window resizing, then continued selecting geometry while the TRIM command prompted for objects or fence points.", "intent": "Navigate the drawing and prepare or perform trim edits.", "app": "Autodesk AutoCAD 2021", "details": "TRIM remains active with prompts to select an object or specify the next fence point."}, {"start_s": 1953.531, "end_s": 1963.918, "action": "Navigated the drawing with middle-button panning and scrolling, selected geometry, and resized the AutoCAD window while continuing the active TRIM operation.", "intent": "Inspect and edit repeated drawing geometry using TRIM.", "app": "Autodesk AutoCAD 2021", "details": "The view shows repeated horizontal outlined elements and the TRIM selection prompt."}, {"start_s": 1963.918, "end_s": 1973.769, "action": "Selected and dragged across multiple drawing elements to define trim or fence selections, repositioned the view, and clicked additional geometry while TRIM remained active.", "intent": "Apply repeated trim selections to the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted from repeated elements to a close-up of slanted and horizontal linework."}, {"start_s": 1973.769, "end_s": 1983.622, "action": "Navigated and panned through the drawing, then dragged across geometry and selected additional objects for the active TRIM command.", "intent": "Continue trimming linework across the drawing.", "app": "Autodesk AutoCAD 2021", "details": "AutoCAD displays repeated outlined shapes and the prompt to select an object to trim or shift-select to extend."}, {"start_s": 1983.622, "end_s": 1993.359, "action": "Selected and dragged across several horizontal elements while panning and resizing the AutoCAD window, then clicked another object with TRIM still active.", "intent": "Trim selected portions of the repeated geometry.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view shifts across rows of long outlined elements; the TRIM prompt remains visible."}, {"start_s": 1993.359, "end_s": 2003.328, "action": "Panned and scrolled to reposition the drawing, dragged across geometry for trim selection, and clicked another line or object while keeping TRIM active.", "intent": "Continue editing and inspecting the drawing with the TRIM tool.", "app": "Autodesk AutoCAD 2021", "details": "The view ends on a close-up of intersecting horizontal, vertical, and slanted linework with the trim selection prompt visible."}, {"start_s": 2003.328, "end_s": 2012.874, "action": "Resized and repositioned the AutoCAD window, then navigated the drawing with repeated drags, clicks, and middle-button view controls while the Trim prompt remained active. Changed the view from a close-up of linework to a centered view showing the full rectangular layout with repeated horizontal sl\u5f62", "intent": "Adjust the drawing view and work within the active Trim command.", "app": "AutoCAD", "details": "The command line showed Trim prompts for selecting objects or extending them."}, {"start_s": 2012.874, "end_s": 2020.552, "action": "Pressed Escape repeatedly to cancel the active Trim operation and other command states, then used middle-button clicks to adjust the view. Left AutoCAD at an idle command prompt with the drawing still visible.", "intent": "Exit the current command and return to a neutral drawing state.", "app": "AutoCAD", "details": "The command line displayed Cancel messages."}, {"start_s": 2020.552, "end_s": 2040.552, "action": "Paused on the AutoCAD drawing, then pressed Escape several times to clear lingering command states.", "intent": "Remain in the drawing while canceling any residual command input.", "app": "AutoCAD", "details": "The view remained centered on the repeated horizontal elements; no substantive geometry change was visible."}, {"start_s": 2040.552, "end_s": 2047.974, "action": "Used middle-button clicks and view navigation around the drawing, pressed Escape repeatedly, and continued adjusting the displayed layout. Typed a final character as AutoCAD became the active application.", "intent": "Navigate and inspect the drawing while clearing command input.", "app": "AutoCAD", "details": "The drawing remained visible with repeated horizontal elements inside a rectangular boundary."}, {"start_s": 2047.974, "end_s": 2054.379, "action": "Switched among AutoCAD input windows, resized the application and dynamic-input panels, pressed Escape, and used scrolling and middle-button clicks to zoom or pan. Ended with the drawing shown smaller and centered.", "intent": "Reconfigure the AutoCAD view and inspect the overall drawing layout.", "app": "AutoCAD", "details": "A Windows Explorer resize event appeared near the end, but AutoCAD remained the visible work area."}, {"start_s": 2054.379, "end_s": 2068.494, "action": "Adjusted the view with scrolling and middle-button clicks, producing a closer view of the repeated horizontal elements. Pressed Escape and typed a command character near the end while system connectivity and display settings changed in the background.", "intent": "Continue navigating the AutoCAD drawing and clear or initiate command input.", "app": "AutoCAD", "details": "The final view showed a zoomed-in portion of the rectangular layout; no confirmed geometry edit was visible."}, {"start_s": 2068.494, "end_s": 2074.536, "action": "Activated AutoCAD and continued the OFFSET command, leaving the dynamic input prompt set to an offset distance of 2'-0\".", "intent": "Set an offset distance for the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open."}, {"start_s": 2074.536, "end_s": 2091.929, "action": "Clicked around the drawing while attempting the active offset operation, then pressed Escape repeatedly to cancel the command and returned to an idle command prompt.", "intent": "Attempt and then cancel an offset operation.", "app": "Autodesk AutoCAD 2021", "details": "The command history shows repeated Cancel entries."}, {"start_s": 2091.929, "end_s": 2099.47, "action": "Selected and dragged near the lower-left drawing geometry, pressed Escape repeatedly, and canceled the active boundary-edge operation.", "intent": "Attempt to modify or select drawing geometry, then cancel the operation.", "app": "Autodesk AutoCAD 2021", "details": "The prompt referenced boundary edges and crossing/mode/project options."}, {"start_s": 2099.47, "end_s": 2104.854, "action": "Started TRIM, clicked and dragged across drawing lines, then pressed Escape repeatedly to cancel without completing the trim.", "intent": "Attempt to trim selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt asked to select an object to trim or shift-select to extend."}, {"start_s": 2104.854, "end_s": 2109.803, "action": "Started EXTEND, clicked and dragged across the right side of the drawing, then pressed Escape to cancel the active selection.", "intent": "Attempt to extend drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The EXTEND prompt asked to select an object to extend or shift-select to trim."}, {"start_s": 2109.803, "end_s": 2114.884, "action": "Continued the EXTEND operation by dragging across the right-side geometry and clicking additional locations, then pressed Escape repeatedly, leaving the drawing with the command canceled.", "intent": "Attempt to extend linework and then cancel the operation.", "app": "Autodesk AutoCAD 2021", "details": "The final command history shows Cancel entries."}, {"start_s": 2114.884, "end_s": 2121.905, "action": "Entered an offset distance of 1'6\" in the OFFSET command, then clicked through the drawing and canceled the command.", "intent": "Create a parallel copy at the specified offset distance.", "app": "AutoCAD", "details": "The command prompt progressed from specifying the offset distance to selecting an object to offset."}, {"start_s": 2121.905, "end_s": 2126.994, "action": "Started the EXTEND command and clicked drawing geometry to extend objects, then canceled the command.", "intent": "Extend selected drawing lines to meet boundary geometry.", "app": "AutoCAD", "details": "The EXTEND prompt remained active while objects were selected."}, {"start_s": 2126.994, "end_s": 2133.389, "action": "Started the TRIM command, clicked several drawing areas, and canceled the operation.", "intent": "Trim intersecting portions of the drawing geometry.", "app": "AutoCAD", "details": "The view showed multiple rectangular outlines and two horizontal bar-like shapes; no final trim result was confirmed."}, {"start_s": 2133.389, "end_s": 2147.311, "action": "Repeated the TRIM command and clicked multiple geometry locations, then pressed Escape repeatedly to cancel active commands.", "intent": "Continue cleaning up intersecting linework.", "app": "AutoCAD", "details": "The drawing view shifted while the command prompt repeatedly returned to canceled state."}, {"start_s": 2147.311, "end_s": 2154.13, "action": "Navigated the drawing with middle-button clicks and canceled the active command several times.", "intent": "Inspect or reposition the drawing while clearing unfinished command states.", "app": "AutoCAD", "details": "The drawing remained visible with rectangular outlines and two horizontal bar-like shapes; the command line showed canceled commands."}, {"start_s": 2154.13, "end_s": 2159.106, "action": "Reactivated OFFSET and began entering an offset distance, leaving the value 1'6\" displayed in the dynamic input field.", "intent": "Prepare another parallel offset operation.", "app": "AutoCAD", "details": "The OFFSET prompt was waiting for confirmation of the entered distance."}, {"start_s": 2159.106, "end_s": 2168.39, "action": "Activated AutoCAD, interacted with the OFFSET command, selected drawing geometry, and then pressed Escape repeatedly to cancel the active operation.", "intent": "Modify the drawing geometry using offset, then cancel the unfinished command.", "app": "AutoCAD", "details": "The drawing remains visible with the command line showing canceled operations."}, {"start_s": 2168.39, "end_s": 2175.866, "action": "Started the LINE command and placed a first point, then switched to EXTEND and selected the drawing area before canceling the operation with Escape.", "intent": "Add or adjust linework in the drawing.", "app": "AutoCAD", "details": "The command prompts show LINE followed by EXTEND; no completed new segment is clearly confirmed."}, {"start_s": 2175.866, "end_s": 2182.233, "action": "Worked in AutoCAD with the LINE command active, positioned the cursor for a next point, and then canceled the unfinished command with Escape.", "intent": "Continue drawing linework while aligning to existing geometry.", "app": "AutoCAD", "details": "Dynamic input shows a next-point prompt and a 90-degree tracking indicator before cancellation."}, {"start_s": 2182.233, "end_s": 2187.429, "action": "Typed the TR command, entered the TRIM command, selected fence points and trimmed drawing geometry, then canceled the remaining operation.", "intent": "Trim excess portions of the drawing.", "app": "AutoCAD", "details": "The TRIM prompt and fence-point prompts are visible; the geometry view changes during the operation."}, {"start_s": 2187.429, "end_s": 2197.913, "action": "Continued using TRIM by selecting and dragging across multiple drawing elements, then canceled the command and returned to an idle command prompt.", "intent": "Refine the drawing by removing unwanted line segments.", "app": "AutoCAD", "details": "The view ends zoomed out, showing a rectangular structure with multiple repeated horizontal elements."}, {"start_s": 2197.913, "end_s": 2209.534, "action": "Navigated around the AutoCAD drawing with middle-clicks and minor view adjustments, started the LINE command, positioned a first point near the lower-left area, and canceled it.", "intent": "Inspect the completed geometry and begin another line placement.", "app": "AutoCAD", "details": "The final view shows the full rectangular drawing with six repeated horizontal elements; the command line ends with canceled commands."}, {"start_s": 2209.534, "end_s": 2213.835, "action": "Activated AutoCAD, adjusted the window, and used the LINE command to specify points near the drawing. Pressed Escape repeatedly to cancel or reset the command.", "intent": "Create or adjust line geometry in the drawing.", "app": "AutoCAD 2021", "details": "Drawing1.dwg remained visible with the LINE command active."}, {"start_s": 2213.835, "end_s": 2223.844, "action": "Kept AutoCAD active while repositioning the window and clicking in the drawing area; began another LINE operation and left it waiting for a first point.", "intent": "Continue placing line geometry in the drawing.", "app": "AutoCAD 2021", "details": "The command prompt showed LINE and \u201cSpecify first point.\u201d"}, {"start_s": 2223.844, "end_s": 2233.882, "action": "Navigated the drawing with middle-button clicks and zoom/pan gestures, clicked near the geometry, and pressed Escape several times. Ended with the view zoomed out and active commands canceled.", "intent": "Inspect and reposition the drawing view while abandoning the pending line operation.", "app": "AutoCAD 2021", "details": "The drawing became smaller in the canvas; the command area showed repeated Cancel messages."}, {"start_s": 2233.882, "end_s": 2246.154, "action": "Continued panning and zooming the AutoCAD drawing with middle-button clicks, pressed Escape repeatedly, and briefly switched to Windows Explorer before returning focus to the drawing.", "intent": "Reposition and inspect the drawing workspace.", "app": "AutoCAD 2021", "details": "The drawing remained centered at a reduced scale."}, {"start_s": 2246.154, "end_s": 2252.714, "action": "Activated AutoCAD and zoomed the drawing in with middle-button navigation. Started the OFFSET command and entered a 2-foot offset distance, leaving the command ready to select an object.", "intent": "Offset drawing geometry by a specified distance.", "app": "AutoCAD 2021", "details": "The prompt showed OFFSET with a 2'-0\" distance and requested an object to offset."}, {"start_s": 2252.714, "end_s": 2258.392, "action": "Continued the OFFSET command, confirmed the distance as 2, and clicked the drawing to select an object and specify the offset side. Left the command active for further selections.", "intent": "Create a 2-unit offset from selected drawing geometry.", "app": "AutoCAD 2021", "details": "The command prompt requested another object or Exit/Undo after the offset-side selection."}, {"start_s": 2258.392, "end_s": 2266.27, "action": "Activated AutoCAD and entered an offset distance of 3, then clicked around the drawing while the OFFSET command awaited a side point. Pressed Escape repeatedly to cancel the command.", "intent": "Attempt to offset geometry in the drawing.", "app": "AutoCAD 2021", "details": "The OFFSET prompt was canceled."}, {"start_s": 2266.27, "end_s": 2276.034, "action": "Entered the TRIM command, selected or clicked geometry around the left edge and horizontal elements, and navigated the drawing while the trim prompt remained active.", "intent": "Trim portions of the drawing geometry.", "app": "AutoCAD 2021", "details": "TRIM remained active and prompted for an object to trim."}, {"start_s": 2276.034, "end_s": 2288.161, "action": "Clicked and navigated around the drawing, then pressed Escape repeatedly to cancel the active operation. Zoomed out to show the full rectangular assembly with repeated horizontal elements.", "intent": "Review the drawing and exit the unfinished command.", "app": "AutoCAD 2021", "details": "The command line showed repeated cancellations."}, {"start_s": 2288.161, "end_s": 2298.206, "action": "Started the LINE command and positioned the cursor near the lower-left area of the drawing, previewing a horizontal segment with dynamic input before canceling and making additional navigation clicks.", "intent": "Attempt to add line geometry near the drawing boundary.", "app": "AutoCAD 2021", "details": "LINE prompts for the first or next point were visible before cancellation."}, {"start_s": 2298.206, "end_s": 2312.427, "action": "Pressed Escape repeatedly to cancel the line operation, clicked and navigated around the drawing, and zoomed between overview and closer views of the repeated horizontal elements.", "intent": "Review the drawing and abandon the line placement.", "app": "AutoCAD 2021", "details": "The command line returned to canceled states."}, {"start_s": 2312.427, "end_s": 2316.983, "action": "Activated OFFSET, entered a distance of 5, and left the command waiting for an object selection after pressing Escape and typing additional command input.", "intent": "Prepare to offset another drawing element.", "app": "AutoCAD 2021", "details": "OFFSET was active with a 5-unit distance and prompted to select an object."}, {"start_s": 2316.983, "end_s": 2322.102, "action": "Entered an offset distance of 5, selected a slanted line, and began positioning the offset before cancelling the active commands.", "intent": "Create an offset copy of a drawing line.", "app": "AutoCAD 2021", "details": "The OFFSET prompt changed from distance entry to object selection, then the operation was cancelled."}, {"start_s": 2322.102, "end_s": 2337.386, "action": "Entered an offset distance of 5'-0\", selected drawing geometry, positioned offset previews, and navigated the view with middle-button actions before cancelling.", "intent": "Offset repeated drawing elements at a specified distance.", "app": "AutoCAD 2021", "details": "The command line showed OFFSET with 5'-0\" and prompts to select an object and side."}, {"start_s": 2337.386, "end_s": 2348.518, "action": "Entered an offset distance of 3, selected the slanted line, and positioned an offset preview; then cancelled the command and left the line selected.", "intent": "Create a 3-unit offset of the slanted line.", "app": "AutoCAD 2021", "details": "The slanted line appeared highlighted in blue during the offset operation."}, {"start_s": 2348.518, "end_s": 2353.362, "action": "Navigated and zoomed the drawing with middle-button actions, cancelled active commands, and issued an erase command that found one object.", "intent": "Inspect the drawing and remove a selected object.", "app": "AutoCAD 2021", "details": "The view zoomed out to show the full repeated-element layout; the command line reported \u201cERASE 1 found.\u201d"}, {"start_s": 2353.362, "end_s": 2358.512, "action": "Cancelled commands, started the LINE command, and left AutoCAD waiting for the first point.", "intent": "Begin drawing a new line.", "app": "AutoCAD 2021", "details": "The command line displayed \u201cLINE Specify first point.\u201d"}, {"start_s": 2358.512, "end_s": 2368.754, "action": "Entered an offset distance of 3, selected drawing geometry, and positioned the cursor to specify the side for the offset before cancelling.", "intent": "Offset a drawing element by 3 units.", "app": "AutoCAD 2021", "details": "The OFFSET command remained active with prompts for object selection and the side to offset."}, {"start_s": 2368.754, "end_s": 2375.57, "action": "Activated AutoCAD, entered an offset distance, clicked the drawing to apply an offset, and pressed Escape repeatedly to cancel the active command.", "intent": "Modify the drawing by offsetting a selected line or object.", "app": "AutoCAD", "details": "The OFFSET prompt changed from requesting a distance to selecting an object."}, {"start_s": 2375.57, "end_s": 2379.589, "action": "Activated the LINE command, moved the crosshair over the drawing while the first-point prompt remained active, then pressed Escape repeatedly.", "intent": "Begin a line operation but cancel it before placing a point.", "app": "AutoCAD", "details": "No line segment was visibly created."}, {"start_s": 2379.589, "end_s": 2384.74, "action": "Returned to the OFFSET command, entered a distance of 1, and left AutoCAD at the offset-distance prompt.", "intent": "Set an offset distance for a subsequent drawing modification.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 1 entered."}, {"start_s": 2384.74, "end_s": 2389.386, "action": "Cancelled the active commands with Escape, started OFFSET again, and entered a new offset distance of 2 feet.", "intent": "Reset the command state and prepare another offset operation.", "app": "AutoCAD", "details": "The OFFSET distance field visibly contained 2'-0\"."}, {"start_s": 2389.386, "end_s": 2396.09, "action": "Entered and confirmed another offset distance, clicked near the horizontal drawing geometry, then pressed Escape repeatedly to cancel and return to the command prompt.", "intent": "Attempt to offset the horizontal drawing element.", "app": "AutoCAD", "details": "The command ended at the OFFSET object-selection prompt; no completed offset was clearly visible."}, {"start_s": 2396.09, "end_s": 2404.799, "action": "Entered an offset distance of 1, clicked drawing geometry twice to apply the operation, clicked another horizontal element, and pressed Escape repeatedly.", "intent": "Create additional offsets on the visible horizontal linework.", "app": "AutoCAD", "details": "The drawing remained in AutoCAD with the OFFSET command cancelled at the end."}, {"start_s": 2404.799, "end_s": 2411.076, "action": "Entered an offset distance of 2'6\", selected drawing geometry, and canceled the OFFSET operation with repeated Esc presses.", "intent": "Modify the drawing by offsetting selected geometry.", "app": "AutoCAD 2021", "details": "The command prompt progressed from specifying the offset distance to selecting an object, then the operation was canceled."}, {"start_s": 2411.076, "end_s": 2420.193, "action": "Started TRIM, clicked several line segments in the drawing, and canceled the active command.", "intent": "Trim unwanted portions of the drawing geometry.", "app": "AutoCAD 2021", "details": "TRIM remained active at the end of the span after repeated Esc presses."}, {"start_s": 2420.193, "end_s": 2428.706, "action": "Continued TRIM by clicking and dragging over multiple line segments, then canceled the command.", "intent": "Refine the drawing by removing intersecting line portions.", "app": "AutoCAD 2021", "details": "The prompt continued to request objects to trim; no confirmed completed trim result was visible."}, {"start_s": 2428.706, "end_s": 2434.706, "action": "Started EXTEND and clicked within the drawing while the prompt requested an object to extend or trim, then canceled the command.", "intent": "Extend selected drawing lines to nearby boundaries.", "app": "AutoCAD 2021", "details": "No confirmed extension result was visible before the command was canceled."}, {"start_s": 2434.706, "end_s": 2450.261, "action": "Entered an offset distance of 9, selected drawing geometry, and left the OFFSET command active briefly before canceling it with repeated Esc presses.", "intent": "Create an offset copy of a selected drawing edge.", "app": "AutoCAD 2021", "details": "The selected slanted edge was highlighted during the offset attempt; the command was canceled without a confirmed final offset."}, {"start_s": 2450.261, "end_s": 2461.877, "action": "Canceled the prior command, started EXTEND, clicked several drawing segments, and navigated the view while leaving EXTEND active.", "intent": "Extend drawing geometry to surrounding boundaries.", "app": "AutoCAD 2021", "details": "The final view showed the EXTEND prompt still requesting an object, with the drawing displayed at a wider zoom."}, {"start_s": 2461.877, "end_s": 2476.397, "action": "Opened AutoCAD, entered and canceled command input, then navigated the drawing with middle-clicks and scroll gestures, changing the view to show multiple repeated horizontal elements.", "intent": "Inspect and navigate the drawing area.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; command suggestions and repeated cancellations were visible."}, {"start_s": 2476.397, "end_s": 2489.452, "action": "Started OFFSET, entered a distance of 2, selected a vertical line, and positioned the offset preview before canceling the operation.", "intent": "Create a 2-unit offset from a selected drawing line.", "app": "AutoCAD", "details": "The OFFSET prompt showed distance 2 and requested the side for the offset."}, {"start_s": 2489.452, "end_s": 2497.531, "action": "Navigated around the drawing with middle-clicks and then pressed Escape repeatedly to clear active commands, leaving the repeated horizontal geometry visible.", "intent": "Review the drawing and exit active command states.", "app": "AutoCAD", "details": "No confirmed geometry edit was visible beyond the ongoing navigation and command cancellations."}, {"start_s": 2497.531, "end_s": 2507.272, "action": "Started OFFSET with a distance of 1, selected and manipulated drawing elements, navigated the view, and canceled the remaining command activity.", "intent": "Apply or test a 1-unit offset on the drawing geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 1; a selected horizontal segment with grips was visible near the end."}, {"start_s": 2507.272, "end_s": 2516.361, "action": "Navigated the drawing with middle-clicks and scroll input, then pressed Escape repeatedly to end active operations and return to an idle view.", "intent": "Inspect the repeated geometry and clear command state.", "app": "AutoCAD", "details": "The drawing view shifted while the repeated horizontal elements remained visible."}, {"start_s": 2516.361, "end_s": 2522.873, "action": "Started OFFSET again, entered a distance of 1, and left the command waiting for object selection before pressing Escape several times.", "intent": "Prepare a 1-unit offset operation on the drawing.", "app": "AutoCAD", "details": "The OFFSET prompt visibly displayed distance 1 and requested an object to offset."}, {"start_s": 2522.873, "end_s": 2527.277, "action": "Activated AutoCAD, entered the TRIM command, clicked within the drawing, and cancelled the active command with Escape.", "intent": "Modify or inspect drawing geometry using TRIM.", "app": "AutoCAD", "details": "The drawing showed repeated horizontal rectangular elements; the command prompt returned to idle."}, {"start_s": 2527.277, "end_s": 2535.15, "action": "Cancelled the prior command, navigated the drawing with middle-button clicks, and entered the EX command prefix.", "intent": "Navigate the drawing and prepare another editing command.", "app": "AutoCAD", "details": "The view changed to show multiple repeated rectangular elements."}, {"start_s": 2535.15, "end_s": 2540.574, "action": "Typed x after the EX prefix, bringing up the command suggestions with ERASE, EXTEND, EXPLODE, and related commands.", "intent": "Select an AutoCAD editing command from the autocomplete list.", "app": "AutoCAD", "details": "The command suggestion list was visible over the drawing."}, {"start_s": 2540.574, "end_s": 2558.699, "action": "Selected and worked through EXTEND and TRIM prompts, clicked and dragged across drawing edges, navigated with middle-button clicks, and cancelled the active operations.", "intent": "Adjust or inspect intersections and lengths of drawing lines.", "app": "AutoCAD", "details": "EXTEND and TRIM prompts alternated while repeated rectangular geometry remained visible."}, {"start_s": 2558.699, "end_s": 2564.661, "action": "Entered the EX command prefix and selected EXTEND from the autocomplete list, then clicked a drawing edge and left the command active.", "intent": "Extend selected drawing geometry to nearby boundaries.", "app": "AutoCAD", "details": "The EXTEND prompt asked for an object to extend."}, {"start_s": 2564.661, "end_s": 2574.617, "action": "Entered TRIM, clicked and dragged across multiple geometry segments, navigated with middle-button clicks and scrolling, and continued selecting edges for trimming.", "intent": "Trim intersecting or unwanted portions of the drawing geometry.", "app": "AutoCAD", "details": "The TRIM prompt alternated between selecting the next fence point and selecting objects to trim."}, {"start_s": 2574.617, "end_s": 2587.181, "action": "Clicked and navigated around the AutoCAD drawing, repeatedly cancelling active commands with Esc while the view shifted across repeated rectangular drawing elements.", "intent": "Inspect or adjust the drawing view while clearing interrupted commands.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 2587.181, "end_s": 2599.174, "action": "Activated the EXTEND command, selected drawing geometry near the left ends of the horizontal elements, and then cancelled the active operation with Esc.", "intent": "Extend or trim selected linework in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line visibly showed EXTEND and prompted to select an object to extend or trim."}, {"start_s": 2599.174, "end_s": 2619.059, "action": "Selected drawing geometry, initiated a MOVE operation, specified a base point and second point, and later selected a group of linework with a window selection.", "intent": "Reposition and select related drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "The view showed horizontal framed elements; the command line displayed MOVE prompts and a later opposite-corner selection prompt."}, {"start_s": 2619.059, "end_s": 2631.683, "action": "Selected multiple line segments, cancelled the preceding operation, and started MOVE on six found objects before positioning the cursor for a base point.", "intent": "Move a set of related linework within the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The MOVE command reported six objects found and awaited a base point."}, {"start_s": 2631.683, "end_s": 2638.845, "action": "Started MOVE on three found objects, selected a base point, previewed their displacement along the horizontal axis, and cancelled the operation with Esc.", "intent": "Attempt to reposition a smaller group of drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "The command line reported MOVE 3 found and showed an Ortho displacement preview."}, {"start_s": 2638.845, "end_s": 2649.252, "action": "Selected several drawing edges and used EXTEND to adjust the ends of the horizontal geometry, while cancelling intermediate prompts and leaving the command active for another object selection.", "intent": "Extend or trim linework in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "A WhatsApp notification appeared over the lower-right corner; the command line and tooltip showed EXTEND prompts."}, {"start_s": 2649.252, "end_s": 2660.861, "action": "Activated AutoCAD and continued the TRIM command, clicking and panning around the repeated structural linework before cancelling the active prompts with Escape.", "intent": "Trim selected portions of the drawing geometry.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in model space."}, {"start_s": 2660.861, "end_s": 2666.843, "action": "Cancelled the prior command, started LINE, clicked near the left end of a horizontal member, and began a window selection before cancelling and leaving another command prompt active.", "intent": "Create or select geometry near the structural member.", "app": "AutoCAD", "details": "The LINE command showed a first-point prompt, followed by a selection-window prompt."}, {"start_s": 2666.843, "end_s": 2680.004, "action": "Cancelled the selection prompts, selected geometry near a member end, and initiated MOVE; the selected linework remained attached to the cursor while subsequent prompts were cancelled.", "intent": "Reposition selected drawing elements.", "app": "AutoCAD", "details": "AutoCAD displayed \u201cMOVE 1 found\u201d and a base-point prompt before cancellation."}, {"start_s": 2680.004, "end_s": 2697.04, "action": "Selected additional linework, initiated MOVE, and navigated the view while positioning the selection; cancelled the operation after the drawing view shifted to show several repeated members.", "intent": "Move a group of structural line elements.", "app": "AutoCAD", "details": "The command history showed \u201cMOVE 7 found\u201d; the operation was cancelled before completion."}, {"start_s": 2697.04, "end_s": 2712.326, "action": "Continued the MOVE operation on seven selected objects, panned or zoomed across the drawing, and clicked to specify placement before leaving the command at a second-point prompt.", "intent": "Position the selected geometry in the drawing.", "app": "AutoCAD", "details": "The second screenshot showed \u201cSpecify second point or <use first point as displacement>\u201d with a displacement value."}, {"start_s": 2712.326, "end_s": 2726.364, "action": "Switched to EXTEND, selected boundary and object geometry with clicks and window drags, and left several line segments highlighted after cancelling the active prompts.", "intent": "Extend selected drawing elements to nearby boundaries.", "app": "AutoCAD", "details": "The command line displayed EXTEND and an object-selection prompt; blue grips remained on selected geometry."}, {"start_s": 2726.364, "end_s": 2735.558, "action": "Resumed the MOVE command, selected geometry, and positioned the selected objects using a base point and orthogonal displacement; then canceled the active command.", "intent": "Reposition selected drawing geometry.", "app": "AutoCAD", "details": "The command line showed MOVE with three objects found, followed by cancellation."}, {"start_s": 2735.558, "end_s": 2748.861, "action": "Entered and used EXTEND, clicked multiple drawing edges, zoomed or panned the view, and canceled the command; then began another command with the keyboard.", "intent": "Adjust line and object extents in the drawing.", "app": "AutoCAD", "details": "The view changed to show multiple repeated horizontal shapes, and the command line later showed canceled commands."}, {"start_s": 2748.861, "end_s": 2760.482, "action": "Started MOVE, selected one object, positioned it from a base point, and canceled after moving the geometry; then initiated another MOVE operation.", "intent": "Reposition a drawing element.", "app": "AutoCAD", "details": "The command line showed MOVE with one object found and later multiple cancellations."}, {"start_s": 2760.482, "end_s": 2769.176, "action": "Started MOVE, selected seven objects, and positioned them from a base point while the view shifted substantially; then canceled the operation and began another command.", "intent": "Move a group of drawing objects.", "app": "AutoCAD", "details": "The command line showed MOVE with seven objects found."}, {"start_s": 2769.176, "end_s": 2776.14, "action": "Started EXTEND, clicked and dragged across drawing geometry, and continued selecting objects to extend or trim while navigating the view; left the EXTEND command active.", "intent": "Extend or trim linework in the drawing.", "app": "AutoCAD", "details": "The prompt repeatedly read \u201cSelect object to extend or shift-select to trim.\u201d"}, {"start_s": 2776.14, "end_s": 2780.957, "action": "Continued EXTEND by selecting and dragging across additional linework, navigated to another area of the drawing, and canceled or exited the active operation.", "intent": "Continue editing line extents.", "app": "AutoCAD", "details": "The EXTEND selection prompt remained visible while the drawing view shifted."}, {"start_s": 2780.957, "end_s": 2785.377, "action": "Switched to AutoCAD, canceled the active command, and selected several drawing segments near the center of the plan.", "intent": "Select geometry for editing.", "app": "AutoCAD", "details": "The command line shows an erase attempt followed by cancellation; selected grips are visible by the end."}, {"start_s": 2785.377, "end_s": 2791.037, "action": "Started MOVE, selected three objects, adjusted the view or selection, then canceled the command.", "intent": "Reposition selected drawing geometry.", "app": "AutoCAD", "details": "The command line shows MOVE with three objects found, followed by cancellations."}, {"start_s": 2791.037, "end_s": 2803.701, "action": "Started EXTEND, selected boundary or fence points, and worked across the drawing while zooming or panning; left the command active awaiting another object.", "intent": "Extend linework to nearby boundaries.", "app": "AutoCAD", "details": "The command line explicitly shows EXTEND and prompts to select an object to extend or trim."}, {"start_s": 2803.701, "end_s": 2813.411, "action": "Started MOVE, selected one object, and dragged it horizontally within the drawing while the command remained active.", "intent": "Reposition a selected portion of the plan.", "app": "AutoCAD", "details": "The command line shows MOVE with one object found and prompts for a base point and second point."}, {"start_s": 2813.411, "end_s": 2822.898, "action": "Selected multiple line segments, canceled the active operation, then initiated another MOVE on the left-side geometry.", "intent": "Edit and reposition selected drawing elements.", "app": "AutoCAD", "details": "The later screenshot shows multiple grips selected and the command line starting MOVE."}, {"start_s": 2822.898, "end_s": 2834.305, "action": "Started MOVE on seven objects, dragged the selected group while panning or zooming substantially, and canceled the operation.", "intent": "Reposition a larger group of drawing geometry.", "app": "AutoCAD", "details": "The command line shows MOVE with seven objects found; the final view is zoomed into slanted linework."}, {"start_s": 2834.305, "end_s": 2844.594, "action": "Activated AutoCAD, navigated around the drawing with clicks and middle-button view controls, canceled active commands, and selected a small line detail near the shelving geometry.", "intent": "Inspect and adjust a drawing detail.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained in Model space; a small group of geometry was selected at the end."}, {"start_s": 2844.594, "end_s": 2849.736, "action": "Started a MOVE operation on the selected detail, specified a base point, and left the command awaiting the second point before canceling it.", "intent": "Reposition the selected drawing detail.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed MOVE with three objects found and a second-point prompt."}, {"start_s": 2849.736, "end_s": 2861.593, "action": "Navigated and zoomed around the shelving geometry, initiated an EXTEND-related operation, canceled intermediate commands, and selected a small line detail near the lower shelf.", "intent": "Inspect and modify shelf-line geometry.", "app": "Autodesk AutoCAD 2021", "details": "A small geometry group was highlighted at the end while the command line showed a selection prompt."}, {"start_s": 2861.593, "end_s": 2868.065, "action": "Started MOVE on three found objects, specified a base point, and canceled before completing the second-point displacement.", "intent": "Attempt to reposition the selected detail.", "app": "Autodesk AutoCAD 2021", "details": "The MOVE prompt displayed a displacement value while the selected detail previewed near the shelf."}, {"start_s": 2868.065, "end_s": 2875.012, "action": "Started EXTEND, selected shelf lines while panning or zooming the view, and repeatedly canceled the command.", "intent": "Extend or trim shelf-line geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed EXTEND with boundary-edge and crossing options; selected lines were highlighted."}, {"start_s": 2875.012, "end_s": 2886.94, "action": "Pressed Escape repeatedly to clear the remaining AutoCAD command state and left the drawing zoomed out to show the full shelving assembly.", "intent": "Exit active commands and review the overall drawing.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the complete shelving-like assembly in Model space with no active selection."}, {"start_s": 2886.94, "end_s": 2904.884, "action": "Scrolled and middle-clicked around the AutoCAD drawing while canceling active commands, then switched focus within AutoCAD.", "intent": "Navigate and inspect the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view remained visible with repeated command cancellations."}, {"start_s": 2904.884, "end_s": 2913.036, "action": "Entered an offset distance of 1'-6\" and selected an object near the lower horizontal geometry, leaving the OFFSET command active.", "intent": "Offset a drawing element by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET and prompted to select an object to offset."}, {"start_s": 2913.036, "end_s": 2918.075, "action": "Entered another offset distance of 1'-6\" and clicked drawing geometry, then canceled the active offset operation.", "intent": "Continue offsetting selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The view was zoomed in on several horizontal elements and the OFFSET prompt remained active before cancellation."}, {"start_s": 2918.075, "end_s": 2926.425, "action": "Entered an offset distance of 2'-0\", clicked a slanted line and nearby geometry, and canceled the OFFSET command after selecting offset-side points.", "intent": "Offset additional structural linework.", "app": "Autodesk AutoCAD 2021", "details": "The slanted line was highlighted during the offset operation."}, {"start_s": 2926.425, "end_s": 2939.554, "action": "Middle-clicked and scrolled through the drawing to reposition the view, then switched focus within AutoCAD.", "intent": "Navigate to another portion of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view moved from the close-up offset area to a broader view of the repeated horizontal elements."}, {"start_s": 2939.554, "end_s": 2944.682, "action": "Started the LINE command, clicked a first point, dragged horizontally with Ortho tracking, and canceled the unfinished line.", "intent": "Begin and then abandon a line construction.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed an orthogonal horizontal segment before the command was canceled."}, {"start_s": 2944.682, "end_s": 2950.618, "action": "Activated AutoCAD, attempted to extend a drawing element, navigated slightly, and canceled the active command.", "intent": "Modify the drawing geometry using Extend.", "app": "AutoCAD", "details": "The command prompt showed EXTEND before multiple Escape presses canceled it."}, {"start_s": 2950.618, "end_s": 2955.594, "action": "Started FILLET, selected drawing geometry, navigated to a wider view, and canceled the operation.", "intent": "Apply a fillet to connected drawing elements.", "app": "AutoCAD", "details": "The prompt requested a second object for the fillet; the visible geometry remained sharp-cornered."}, {"start_s": 2955.594, "end_s": 2971.067, "action": "Started TRIM, selected or targeted geometry around the repeated horizontal elements, navigated the view, and canceled the command.", "intent": "Trim excess portions of the drawing geometry.", "app": "AutoCAD", "details": "The TRIM prompt remained active while the view was repositioned."}, {"start_s": 2971.067, "end_s": 2980.63, "action": "Started EXTEND and then TRIM, clicked drawing elements and navigated among the repeated horizontal members, and canceled the active operations.", "intent": "Adjust intersections and remove unwanted line segments.", "app": "AutoCAD", "details": "Prompts alternated between EXTEND and TRIM; no clearly completed modification was visible."}, {"start_s": 2980.63, "end_s": 2997.943, "action": "Pressed Escape repeatedly to clear the active AutoCAD commands, then waited and made minor view-navigation inputs.", "intent": "Exit unfinished editing commands and review the drawing.", "app": "AutoCAD", "details": "The drawing stayed visible in a wider view with repeated horizontal elements."}, {"start_s": 2997.943, "end_s": 3003.052, "action": "Navigated slightly, selected the slanted left-side linework, and left the geometry highlighted with grips.", "intent": "Select a drawing object for possible further editing.", "app": "AutoCAD", "details": "The slanted boundary line was highlighted blue with square grips."}, {"start_s": 3003.052, "end_s": 3009.227, "action": "Activated AutoCAD, interacted with the drawing using clicks and middle-button navigation, and canceled the active TRIM operation with repeated Esc presses.", "intent": "Review and adjust the drawing geometry while exiting an unfinished trim command.", "app": "AutoCAD", "details": "The view changed from a close-up of the repeated horizontal elements to a smaller overall view."}, {"start_s": 3009.227, "end_s": 3019.34, "action": "Entered an offset distance of 1 after the OFFSET prompt, selected a line, and clicked to specify the side for the offset; then canceled or exited the operation with Esc.", "intent": "Create an offset line from existing drawing geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET with a 1-unit distance and a prompt to select the side."}, {"start_s": 3019.34, "end_s": 3032.515, "action": "Navigated the drawing with middle-button clicks and scrolling, pressed Esc repeatedly to cancel active commands, and ended on a closer view of the horizontal repeated elements.", "intent": "Inspect different portions of the drawing and clear unfinished commands.", "app": "AutoCAD", "details": "No completed new geometry is clearly confirmed; the command line ended with canceled commands."}, {"start_s": 3032.515, "end_s": 3047.526, "action": "Started the LINE command and moved the crosshair around the drawing while the first-point prompt remained active; clicked and used Esc to cancel without visibly completing a line.", "intent": "Attempt to place a line near the detailed drawing geometry.", "app": "AutoCAD", "details": "Dynamic input displayed changing coordinate values while prompting for the first point."}, {"start_s": 3047.526, "end_s": 3057.959, "action": "Continued the LINE command, clicked near the lower drawing area, moved the cursor to preview a horizontal segment, and pressed Esc repeatedly to cancel the attempt.", "intent": "Attempt and then abandon another line placement.", "app": "AutoCAD", "details": "The dynamic input showed an orthogonal 180-degree line preview before cancellation."}, {"start_s": 3057.959, "end_s": 3071.767, "action": "Clicked and navigated through the drawing while clearing active commands with repeated Esc presses, leaving AutoCAD in an idle command state on a shifted view of the repeated horizontal elements.", "intent": "Inspect the drawing and return to a neutral state after unfinished command attempts.", "app": "AutoCAD", "details": "The command line showed multiple Cancel entries and no completed command result."}, {"start_s": 3071.767, "end_s": 3083.048, "action": "Adjusted the AutoCAD window repeatedly, clicked in the drawing, and pressed Escape several times to cancel the active LINE command.", "intent": "Cancel the current drawing operation.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible with the LINE command active and then canceled."}, {"start_s": 3083.048, "end_s": 3095.545, "action": "Adjusted the AutoCAD window, activated LINE, clicked in the drawing, and used Escape to cancel the unfinished line before making additional middle-button clicks.", "intent": "Attempt and then abandon line placement in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed orthogonal 180-degree line guidance; no completed line is confirmed."}, {"start_s": 3095.545, "end_s": 3104.571, "action": "Repositioned and resized the AutoCAD window while leaving LINE active, then pressed Escape repeatedly to clear the unfinished command.", "intent": "Cancel an unfinished line-drawing operation.", "app": "AutoCAD", "details": "The drawing view shifted slightly while the command prompt continued to request a first point."}, {"start_s": 3104.571, "end_s": 3117.886, "action": "Adjusted the AutoCAD window, clicked and dragged in the drawing, and pressed Escape repeatedly to cancel the active line operation.", "intent": "Attempt line placement and then abandon it.", "app": "AutoCAD", "details": "Dynamic input displayed orthogonal line guidance; no completed geometry is confirmed."}, {"start_s": 3117.886, "end_s": 3131.03, "action": "Repositioned and resized the AutoCAD window, clicked in the drawing, and pressed Escape to cancel the active LINE command.", "intent": "Cancel the current line-drawing attempt.", "app": "AutoCAD", "details": "The view shifted across the drawing and ended with the command canceled."}, {"start_s": 3131.03, "end_s": 3139.851, "action": "Adjusted and briefly hid the AutoCAD window, then clicked in the drawing and continued the LINE command by setting a point and awaiting the next point.", "intent": "Continue placing a line segment in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed an orthogonal 0-degree segment with a distance value, and the prompt remained at Specify next point."}, {"start_s": 3139.851, "end_s": 3150.711, "action": "Activated AutoCAD, repeatedly resized and repositioned the window, and interacted with the drawing while a LINE command remained active. Clicked around the drawing and canceled the command with Escape.", "intent": "Adjust the AutoCAD view and attempt line placement.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; dynamic input showed an orthogonal 4'-10\" line preview before cancellation."}, {"start_s": 3150.711, "end_s": 3158.519, "action": "Resized and repositioned the AutoCAD window, clicked in the drawing, and continued the active LINE operation briefly. Pressed Escape repeatedly to cancel it.", "intent": "Continue and then abandon line placement in the drawing.", "app": "AutoCAD", "details": "The LINE prompt was visible with an orthogonal 4'-2\" preview before cancellation."}, {"start_s": 3158.519, "end_s": 3173.904, "action": "Adjusted the AutoCAD window and drawing view, clicked to place or specify a line point, then canceled the active LINE command with Escape.", "intent": "Attempt line placement at a new location in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed an endpoint about 9'-9\" at 180\u00b0; the command was canceled without a confirmed new line."}, {"start_s": 3173.904, "end_s": 3188.269, "action": "Repositioned and resized AutoCAD, initiated another LINE operation, clicked near the drawing geometry, and canceled the command with Escape.", "intent": "Attempt another line placement along the drawing geometry.", "app": "AutoCAD", "details": "The LINE command displayed a first-point prompt and coordinate dynamic input before cancellation."}, {"start_s": 3188.269, "end_s": 3204.878, "action": "Worked in AutoCAD with repeated window adjustments and view navigation, initiated LINE, clicked to define points, and left the command active while moving around the drawing.", "intent": "Place or inspect line geometry across the drawing.", "app": "AutoCAD", "details": "Dynamic input showed first- and next-point prompts; no completed line is clearly confirmed."}, {"start_s": 3204.878, "end_s": 3209.175, "action": "Entered a partial command beginning with \u201cd\u201d and \u201cli\u201d in AutoCAD, displayed the command suggestion list, then canceled the active prompt and navigated the drawing view.", "intent": "Invoke or search for a drawing command, likely a dimension-related command.", "app": "AutoCAD", "details": "The suggestion list included D, DELETE, DIMLINEAR, DT, DISASSEMBLE, and DIM; the final state showed \u201cSelect object to dimension\u201d canceled."}, {"start_s": 3209.175, "end_s": 3216.918, "action": "Activated AutoCAD, started the LINE command, placed a point, and adjusted the view while attempting the next point. Pressed Escape repeatedly to cancel the active command.", "intent": "Create or edit linework in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing shows repeated horizontal rectangular elements; the LINE prompt was active before cancellation."}, {"start_s": 3216.918, "end_s": 3224.149, "action": "Entered the TRIM command and clicked multiple drawing elements while the prompt requested objects to trim or extend. Continued selecting targets in the zoomed drawing view.", "intent": "Trim intersecting or unwanted portions of the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained active throughout the span."}, {"start_s": 3224.149, "end_s": 3241.743, "action": "Continued selecting and dragging across the drawing while the TRIM prompt remained active, with view movement and zoom changes. The command was then canceled, leaving the drawing in a broader view with selected geometry visible.", "intent": "Refine the repeated drawing elements by trimming or selecting portions of their geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command history shows TRIM followed by cancellation and a selection-window prompt."}, {"start_s": 3241.743, "end_s": 3248.147, "action": "Navigated and zoomed the drawing, canceled an active operation, then entered ERASE and removed two objects. Selected geometry remained visible in the resulting view.", "intent": "Remove unwanted drawing objects and inspect the revised geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line explicitly reports \u201cERASE 2 found.\u201d"}, {"start_s": 3248.147, "end_s": 3261.066, "action": "Panned and zoomed through the repeated rectangular elements, clicking several locations to inspect or select geometry. Began another command by typing a character at the end of the span.", "intent": "Review and prepare further edits to the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted from a wider layout to a closer inspection of the central repeated elements."}, {"start_s": 3261.066, "end_s": 3265.911, "action": "Entered the OFFSET command and clicked within the drawing while the prompt requested an object to offset. Pressed Escape repeatedly, canceling the operation without a visible offset result.", "intent": "Attempt to create parallel geometry from an existing drawing element.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt remained visible before the command was canceled."}, {"start_s": 3265.911, "end_s": 3270.482, "action": "Entered an offset distance of 2 in AutoCAD, then canceled the active command.", "intent": "Set up an offset operation on the drawing.", "app": "AutoCAD 2021", "details": "The OFFSET prompt displayed a distance of 2 before cancellation."}, {"start_s": 3270.482, "end_s": 3284.21, "action": "Canceled prior commands, typed the DIM command, and selected it from the autocomplete list; began specifying the first and second extension-line origins for a linear dimension.", "intent": "Create a linear dimension in the drawing.", "app": "AutoCAD 2021", "details": "The command line showed DIMLINEAR awaiting the second extension-line origin."}, {"start_s": 3284.21, "end_s": 3304.19, "action": "Entered an offset distance of 2, selected a drawing object for OFFSET, and attempted to specify the offset side; canceled the operation, then selected geometry in the drawing.", "intent": "Offset selected drawing geometry and adjust the selection.", "app": "AutoCAD 2021", "details": "The OFFSET prompt showed distance 2 and later the drawing displayed selected geometry with blue grips."}, {"start_s": 3304.19, "end_s": 3319.15, "action": "Started MOVE on three found objects, selected a base point, and dragged a selection window before canceling or leaving the command active.", "intent": "Reposition selected drawing objects.", "app": "AutoCAD 2021", "details": "The command line showed MOVE 3 found and later a selection-window prompt."}, {"start_s": 3319.15, "end_s": 3330.306, "action": "Selected drawing geometry and used MOVE; dragged the selected objects, then left the resulting geometry selected and initiated another selection or command.", "intent": "Move a group of drawing elements.", "app": "AutoCAD 2021", "details": "The final view showed multiple blue-grip selected line elements in the drawing."}, {"start_s": 3330.306, "end_s": 3340.96, "action": "Selected eight objects and started MOVE, specified a base point, and dragged the group while AutoCAD prompted for the second point or displacement.", "intent": "Reposition the selected group of drawing geometry.", "app": "AutoCAD 2021", "details": "The MOVE command remained active at the end, with a second-point prompt and a near-zero displacement preview."}, {"start_s": 3340.96, "end_s": 3352.817, "action": "Resized and repositioned the AutoCAD window, navigated the drawing with middle-button clicks, selected a group of linework, and began a MOVE command.", "intent": "Adjust and reposition selected drawing geometry.", "app": "AutoCAD", "details": "The selected geometry remained highlighted and AutoCAD prompted for a base point."}, {"start_s": 3352.817, "end_s": 3366.076, "action": "Continued the MOVE command, chose a base point and displacement through clicks, and moved the selected linework out of the visible area.", "intent": "Relocate the selected drawing elements.", "app": "AutoCAD", "details": "AutoCAD showed MOVE prompts while the selected grid-like geometry shifted away."}, {"start_s": 3366.076, "end_s": 3376.263, "action": "Navigated the drawing with middle-button clicks, selected additional geometry, and initiated another MOVE operation.", "intent": "Reposition another set of drawing elements.", "app": "AutoCAD", "details": "The view changed across the drawing and AutoCAD displayed MOVE with selected geometry and base-point prompts."}, {"start_s": 3376.263, "end_s": 3382.886, "action": "Zoomed or panned to a wider view, then entered ERASE and removed one found object.", "intent": "Delete an unwanted drawing object.", "app": "AutoCAD", "details": "The command line showed ERASE 1 found after the view widened."}, {"start_s": 3382.886, "end_s": 3388.089, "action": "Entered EXTEND, clicked drawing geometry, and left the command active after canceling intermediate prompts.", "intent": "Extend selected linework to nearby boundaries.", "app": "AutoCAD", "details": "AutoCAD prompted to select an object to extend or shift-select to trim."}, {"start_s": 3388.089, "end_s": 3397.259, "action": "Switched between EXTEND and TRIM, selected or fence-clicked linework, then canceled the commands and navigated to another area of the drawing.", "intent": "Refine intersecting linework by extending and trimming it.", "app": "AutoCAD", "details": "The command line showed fence-point prompts and TRIM; the final view displayed a simplified set of lines."}, {"start_s": 3397.259, "end_s": 3404.392, "action": "Activated AutoCAD\u2019s Extend command, clicked and navigated among drawing edges, zoomed or panned the view, then canceled the active command.", "intent": "Modify and inspect line geometry using Extend.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open; the command line ended at *Cancel*."}, {"start_s": 3404.392, "end_s": 3410.967, "action": "Activated Trim, clicked several drawing edges while zooming or panning across the geometry, and left Trim active awaiting another object selection.", "intent": "Trim unwanted portions of drawing lines.", "app": "Autodesk AutoCAD 2021", "details": "The visible prompt was \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 3410.967, "end_s": 3415.307, "action": "Canceled the preceding command, activated Extend, clicked in the drawing, and canceled or exited the interaction while leaving the Extend prompt visible.", "intent": "Extend selected drawing edges.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view shifted slightly and Extend remained the visible command context."}, {"start_s": 3415.307, "end_s": 3419.476, "action": "Selected multiple line locations under Extend, then pressed Escape repeatedly to cancel the operation.", "intent": "Attempt to extend several line segments and stop the command.", "app": "Autodesk AutoCAD 2021", "details": "The command line ended with repeated *Cancel* messages."}, {"start_s": 3419.476, "end_s": 3425.465, "action": "Activated Trim, clicked and navigated across multiple line intersections with zooming or panning, then pressed Escape repeatedly without exiting the drawing.", "intent": "Trim portions of the architectural linework.", "app": "Autodesk AutoCAD 2021", "details": "Trim remained active with the prompt to select an object to trim."}, {"start_s": 3425.465, "end_s": 3433.299, "action": "Activated Trim, clicked several line segments and intersections while panning or zooming the drawing, and left the Trim command active for further selection.", "intent": "Continue trimming unwanted line segments.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the Trim selection prompt over the drawing."}, {"start_s": 3433.299, "end_s": 3443.137, "action": "Moved the AutoCAD window repeatedly, clicked within the drawing while the TRIM prompt was active, scrolled, and pressed Escape several times to cancel the command and resize transient input windows.", "intent": "Manipulate or cancel an active trim operation in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing showed repeated horizontal members and the command area prompted to select an object to trim."}, {"start_s": 3443.137, "end_s": 3456.047, "action": "Pressed Escape to cancel active prompts, middle-clicked and scrolled around the drawing, then continued reviewing the horizontal members without a visible committed edit.", "intent": "Navigate and inspect the drawing while clearing command prompts.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed repeated Cancel messages."}, {"start_s": 3456.047, "end_s": 3463.793, "action": "Middle-clicked and scrolled through the drawing, pressed Escape repeatedly to cancel prompts, and left the view centered on the repeated horizontal members.", "intent": "Navigate the drawing and exit unfinished operations.", "app": "Autodesk AutoCAD 2021", "details": "No definite geometry change was visible; the command line continued to show canceled commands."}, {"start_s": 3463.793, "end_s": 3469.769, "action": "Activated AutoCAD dynamic input, typed a dimension-related command beginning with \u201cdi,\u201d selected the DIMLINEAR suggestion, and began specifying a dimension with a visible 3'-2\" measurement.", "intent": "Create a linear dimension for geometry in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The autocomplete list showed DIMLINEAR and the prompt advanced to specify dimension line location."}, {"start_s": 3469.769, "end_s": 3474.616, "action": "Accepted the dimension prompt, navigated slightly, started the OFFSET command, and entered a 3-foot offset distance while AutoCAD prompted for an object to offset.", "intent": "Offset selected drawing geometry by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with a distance entry of 3' and the prompt to select an object."}, {"start_s": 3474.616, "end_s": 3484.329, "action": "Selected a drawing object for OFFSET, specified the side for the 3'-2\" offset, then pressed Escape and continued clicking and scrolling while the offset prompt remained active.", "intent": "Apply or preview an offset to a selected line and then exit the operation.", "app": "Autodesk AutoCAD 2021", "details": "A blue highlighted line and dynamic input displayed 3'-2\" while AutoCAD requested the side to offset."}, {"start_s": 3484.329, "end_s": 3502.406, "action": "Clicked around the AutoCAD drawing and repeatedly pressed Escape to cancel active commands, leaving the linework view unchanged.", "intent": "Cancel active drawing operations and inspect the geometry.", "app": "AutoCAD", "details": null}, {"start_s": 3502.406, "end_s": 3512.783, "action": "Activated AutoCAD command input, entered command text, selected DIMLINEAR from the autocomplete list, and clicked drawing points to begin a linear dimension; then pressed Escape repeatedly.", "intent": "Start a linear dimensioning operation on the drawing.", "app": "AutoCAD", "details": "The DIMLINEAR prompt remained active after selecting the first extension point."}, {"start_s": 3512.783, "end_s": 3526.882, "action": "Entered a numeric offset value, clicked points on the drawing, and initiated OFFSET; then canceled the operation with Escape.", "intent": "Create an offset from selected drawing geometry.", "app": "AutoCAD", "details": "The OFFSET command showed an entered distance of 3'-2\" and prompted for the side to offset."}, {"start_s": 3526.882, "end_s": 3537.043, "action": "Entered the EXTEND command, clicked and dragged across several line features, and continued selecting objects to extend or trim.", "intent": "Extend or trim drawing lines to nearby boundaries.", "app": "AutoCAD", "details": "The EXTEND prompt remained visible while multiple geometry selections were attempted."}, {"start_s": 3537.043, "end_s": 3553.609, "action": "Continued clicking and dragging linework under the EXTEND command, navigated the drawing view, and pressed Escape several times to cancel the active operation.", "intent": "Adjust line endpoints using Extend and then stop the command.", "app": "AutoCAD", "details": "The view shifted to a sparser portion of the drawing and ended with canceled command prompts."}, {"start_s": 3553.609, "end_s": 3560.472, "action": "Continued selecting objects while EXTEND remained active, panned or scrolled the drawing, and pressed Escape to cancel the command.", "intent": "Review and terminate the remaining line-extension operation.", "app": "AutoCAD", "details": "The final view showed enlarged linework with the command line reporting cancellations."}, {"start_s": 3560.472, "end_s": 3570.544, "action": "Activated AutoCAD, adjusted the view with panning and zooming, and initiated the EXTEND command. Selected a vertical drawing segment and continued selecting geometry to extend.", "intent": "Modify drawing geometry by extending linework to nearby boundaries.", "app": "Autodesk AutoCAD 2021", "details": "EXTEND remained active with the prompt to select objects to extend."}, {"start_s": 3570.544, "end_s": 3575.349, "action": "Panned and zoomed around the drawing while EXTEND remained active, then selected additional linework near the repeated horizontal elements.", "intent": "Continue extending selected drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt continued to request objects to extend or trim."}, {"start_s": 3575.349, "end_s": 3592.275, "action": "Panned and zoomed through the drawing, canceled the active EXTEND operation, and selected a small group of line segments.", "intent": "Review the drawing and change the selection after abandoning the extension operation.", "app": "Autodesk AutoCAD 2021", "details": "The later view showed several grips on selected geometry and a selection-window prompt."}, {"start_s": 3592.275, "end_s": 3611.058, "action": "Selected three objects and started MOVE, specified a base point, and began positioning the selected geometry with a displacement preview.", "intent": "Reposition selected drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "MOVE was active and waiting for the second point or displacement."}, {"start_s": 3611.058, "end_s": 3617.331, "action": "Canceled the pending operation, selected another set of drawing elements, and initiated MOVE again.", "intent": "Restart the repositioning operation on a different selection.", "app": "Autodesk AutoCAD 2021", "details": "The command history showed repeated cancellations before a new MOVE command began."}, {"start_s": 3617.331, "end_s": 3625.778, "action": "Selected three objects, specified a base point, and moved the selection horizontally while AutoCAD displayed the second-point displacement preview; pressed Escape repeatedly without completing the command.", "intent": "Attempt to reposition the selected geometry and then cancel the unfinished move.", "app": "Autodesk AutoCAD 2021", "details": "MOVE remained active at the end, awaiting the second point or displacement."}, {"start_s": 3625.778, "end_s": 3636.912, "action": "Activate AutoCAD, continue the EXTEND operation, select drawing geometry, cancel the command, and begin a new command.", "intent": "Modify intersecting drawing geometry using EXTEND.", "app": "AutoCAD", "details": "The drawing view remained active; selected geometry and command prompts were visible."}, {"start_s": 3636.912, "end_s": 3641.108, "action": "Cancel the active operation, select three objects, and start MOVE so AutoCAD prompts for a base point.", "intent": "Move selected drawing geometry.", "app": "AutoCAD", "details": "The command line showed MOVE with three objects found and a base-point prompt."}, {"start_s": 3641.108, "end_s": 3658.704, "action": "Specify a MOVE base point, reposition the selected geometry, cancel the operation, and start another MOVE with two objects selected.", "intent": "Adjust the position of drawing elements.", "app": "AutoCAD", "details": "The view shifted during the edits and ended with MOVE reporting two objects found."}, {"start_s": 3658.704, "end_s": 3665.55, "action": "Specify a base point for the selected objects, move them within the drawing, cancel the unfinished displacement, and begin another MOVE operation.", "intent": "Continue repositioning drawing geometry.", "app": "AutoCAD", "details": "AutoCAD displayed MOVE prompts and then returned to a new command state."}, {"start_s": 3665.55, "end_s": 3673.439, "action": "Select three objects for MOVE, navigate the drawing view with scrolling, cancel the displacement, and begin an additional command.", "intent": "Reposition and inspect drawing geometry.", "app": "AutoCAD", "details": "MOVE reported three objects found; the final view showed separated linework and an active prompt."}, {"start_s": 3673.439, "end_s": 3682.485, "action": "Start EXTEND, select or attempt to select drawing edges, cancel the operation, and leave the drawing in the EXTEND command state.", "intent": "Extend selected linework to nearby boundaries.", "app": "AutoCAD", "details": "The command line showed EXTEND and prompts to select objects to extend; the operation was canceled near the end."}, {"start_s": 3682.485, "end_s": 3690.438, "action": "Activated AutoCAD and continued a MOVE operation by selecting a base point and working toward a second-point displacement. Pressed Escape repeatedly and began entering another command.", "intent": "Position drawing geometry using the MOVE command.", "app": "AutoCAD", "details": "Drawing1.dwg; three objects were indicated in the MOVE prompt."}, {"start_s": 3690.438, "end_s": 3702.275, "action": "Entered a command, clicked in the drawing, then canceled the active operation. Navigated the view with middle-button clicks and scrolls, ending on a zoomed view of repeated linear geometry with an object selected.", "intent": "Modify and inspect the drawing geometry.", "app": "AutoCAD", "details": "The command line showed TRIM-related options and later canceled commands."}, {"start_s": 3702.275, "end_s": 3716.491, "action": "Canceled prior commands, navigated and zoomed the drawing, then activated TRIM and clicked several object edges while panning across the repeated geometry.", "intent": "Trim unwanted portions of the drawing.", "app": "AutoCAD", "details": "TRIM remained active with the prompt to select an object to trim or shift-select to extend."}, {"start_s": 3716.491, "end_s": 3722.457, "action": "Canceled the active TRIM interaction, panned and zoomed the drawing, and clicked a small segment near the right side of the repeated geometry, leaving it selected.", "intent": "Inspect and adjust selected drawing segments.", "app": "AutoCAD", "details": "Several commands were canceled; the final view showed a small segment with grips."}, {"start_s": 3722.457, "end_s": 3738.087, "action": "Canceled commands, used navigation clicks and scrolls, then started LINE and picked points around the repeated geometry before continuing to reposition the view.", "intent": "Add or edit line geometry in the drawing.", "app": "AutoCAD", "details": "The LINE prompt requested the next point; an ERASE result also appeared earlier in the span."}, {"start_s": 3738.087, "end_s": 3749.718, "action": "Re-entered TRIM, clicked and dragged across several edges in the drawing, and panned or zoomed to inspect additional repeated elements. Used Undo and Escape to end the operation.", "intent": "Trim and refine repeated drawing geometry.", "app": "AutoCAD", "details": "TRIM showed Projection=UCS and Edge=None, with the prompt to select an object to trim or extend."}, {"start_s": 3749.718, "end_s": 3754.014, "action": "Switched to AutoCAD, entered a command beginning with X, clicked in the drawing area, and repeatedly pressed Escape to cancel active prompts.", "intent": "Cancel or clear an AutoCAD command state.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 3754.014, "end_s": 3764.131, "action": "Entered the TRIM command, clicked and middle-clicked around the drawing, used scroll inputs to navigate, and pressed Escape repeatedly; the view changed to show more of the drawing.", "intent": "Trim or inspect geometry in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt visibly showed TRIM and \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 3764.131, "end_s": 3784.059, "action": "Middle-clicked around the drawing and then repeatedly pressed Escape, leaving the displayed building-like linework centered at a smaller zoom.", "intent": "Navigate the drawing and cancel any active command.", "app": "Autodesk AutoCAD 2021", "details": "The command history showed repeated cancellation messages."}, {"start_s": 3784.059, "end_s": 3788.079, "action": "Scrolled and middle-clicked near the upper geometry, pressed Escape, and began entering a command with D.", "intent": "Navigate the drawing and start another AutoCAD command.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 3788.079, "end_s": 3797.585, "action": "Typed a command beginning with \u201cli,\u201d selected or invoked a dimension-related command, and clicked in the drawing; the view zoomed in and showed a prompt to specify dimension line location before the operation was canceled.", "intent": "Create or position a linear dimension in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Autocomplete showed DIMSTYLE, DELETE, DIMLINEAR, and related commands; the later prompt read \u201cSpecify dimension line location.\u201d"}, {"start_s": 3797.585, "end_s": 3803.5, "action": "Entered an offset distance of 8, invoked OFFSET, clicked geometry in the drawing, and then pressed Escape repeatedly to cancel the offset operation.", "intent": "Offset selected drawing geometry by the entered distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET and \u201cSpecify offset distance \u2026: 8,\u201d followed by \u201cSelect object to offset.\u201d"}, {"start_s": 3803.5, "end_s": 3812.926, "action": "Activate AutoCAD, invoke the Extend command, select drawing geometry, and cancel the command with repeated Esc presses.", "intent": "Modify nearby linework by extending objects.", "app": "AutoCAD", "details": "The drawing remains in model space with the Extend prompt visible."}, {"start_s": 3812.926, "end_s": 3821.759, "action": "Start the Line command, click points on the drawing, adjust the view, and cancel the active line operation.", "intent": "Add line geometry to the drawing.", "app": "AutoCAD", "details": "Dynamic input shows prompts for the first and next line points."}, {"start_s": 3821.759, "end_s": 3837.644, "action": "Continue placing line points across the drawing while panning or zooming, then cancel the Line command.", "intent": "Construct additional linework in model space.", "app": "AutoCAD", "details": "The Line command remains active during the drawing and prompts for the next point."}, {"start_s": 3837.644, "end_s": 3846.61, "action": "Invoke Trim, drag a crossing selection over multiple drawing elements, click additional geometry, and cancel the trim operation.", "intent": "Trim unwanted portions of the drawing geometry.", "app": "AutoCAD", "details": "The Trim prompt asks to select objects to trim or shift-select to extend."}, {"start_s": 3846.61, "end_s": 3853.491, "action": "Invoke Extend, drag across drawing geometry, then invoke Trim and select another object before cancelling.", "intent": "Adjust line extents and remove excess geometry.", "app": "AutoCAD", "details": "The view is repositioned while Extend and Trim prompts remain visible."}, {"start_s": 3853.491, "end_s": 3863.496, "action": "Invoke Trim and perform a prolonged drag-based crossing selection across the drawing while the trim prompt remains active.", "intent": "Select multiple objects for trimming.", "app": "AutoCAD", "details": "The span ends during the active crossing selection; no confirmed completion is visible."}, {"start_s": 3863.496, "end_s": 3873.622, "action": "Dragged across the AutoCAD drawing, clicked and middle-clicked in the canvas, and repositioned the view while the TRIM prompt remained active.", "intent": "Adjust the drawing view and interact with the active trim operation.", "app": "Autodesk AutoCAD 2021", "details": "The canvas view changed from a close-up of lines to a visible multi-level drawing; AutoCAD continued prompting to select an object to trim or extend."}, {"start_s": 3873.622, "end_s": 3883.772, "action": "Pressed Escape repeatedly to cancel the active command, then middle-clicked and adjusted the view to display the full drawing more clearly.", "intent": "Exit the unfinished trim operation and inspect the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed repeated Cancel messages and the drawing became centered at a smaller scale."}, {"start_s": 3883.772, "end_s": 3896.415, "action": "Middle-clicked to further adjust the drawing view, pressed Escape repeatedly, and briefly switched focus within AutoCAD.", "intent": "Navigate the drawing and clear any lingering command state.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible while the view scale and position changed; no confirmed geometry edit was shown."}, {"start_s": 3896.415, "end_s": 3900.431, "action": "Typed command characters and pressed Escape repeatedly while switching between the AutoCAD drawing window and its dynamic-input control.", "intent": "Attempt or cancel a command in AutoCAD.", "app": "Autodesk AutoCAD 2021", "details": "The drawing stayed visible and the command line displayed Cancel messages."}, {"start_s": 3900.431, "end_s": 3910.337, "action": "Returned focus to the AutoCAD drawing, moved the window several times, pressed Escape, and left the TRIM command active with the cursor over the drawing.", "intent": "Reposition the application and continue or reset the trim interaction.", "app": "Autodesk AutoCAD 2021", "details": "The prompt read \u201cSelect object to trim or shift-select to extend or,\u201d with TRIM settings visible in the command area."}, {"start_s": 3910.337, "end_s": 3925.383, "action": "Middle-clicked at several locations to navigate the drawing and repeatedly pressed Escape to cancel command states.", "intent": "Inspect different areas of the drawing while clearing active commands.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted and enlarged around the multi-level line drawing; repeated Cancel messages remained visible and no definite trim result was confirmed."}, {"start_s": 3925.383, "end_s": 3936.311, "action": "Resized and repositioned the AutoCAD window, then adjusted the drawing view while the HATCH command remained active and awaited an internal point.", "intent": "Prepare the drawing view for selecting a hatch area.", "app": "AutoCAD 2021", "details": "The drawing remained in Hatch Creation mode with the prompt \"Pick internal point.\""}, {"start_s": 3936.311, "end_s": 3946.496, "action": "Clicked within the drawing while HATCH awaited an internal point, then repositioned the view and interacted with the hatch-pattern controls.", "intent": "Continue configuring or placing a hatch in the drawing.", "app": "AutoCAD 2021", "details": "Hatch Creation remained active; the drawing view showed several repeated rectangular regions."}, {"start_s": 3946.496, "end_s": 3955.845, "action": "Clicked and dragged around the hatch controls and drawing area, changing the displayed hatch settings while keeping the HATCH command active.", "intent": "Adjust hatch properties before selecting the hatch region.", "app": "AutoCAD 2021", "details": "The Hatch Creation ribbon showed pattern controls and the angle field at 0."}, {"start_s": 3955.845, "end_s": 3964.005, "action": "Changed the hatch settings and repositioned the view; a brick-like hatch pattern appeared in the upper drawing area while the internal-point prompt remained active.", "intent": "Apply and preview a hatch pattern in the drawing.", "app": "AutoCAD 2021", "details": "The visible hatch pattern changed to a brick layout."}, {"start_s": 3964.005, "end_s": 3975.248, "action": "Continued adjusting the view and hatch interaction, leaving the brick-patterned region visible above the repeated drawing elements.", "intent": "Refine the hatch placement or inspect the resulting pattern.", "app": "AutoCAD 2021", "details": "No completion of the HATCH command was shown."}, {"start_s": 3975.248, "end_s": 3985.18, "action": "Clicked and dragged across several drawing regions while HATCH analyzed visible objects and internal islands, selecting or previewing multiple areas for hatching.", "intent": "Select additional internal regions for the hatch operation.", "app": "AutoCAD 2021", "details": "The command line displayed \"Selecting everything visible\" and \"Analyzing internal islands\" while the prompt still requested an internal point."}, {"start_s": 3985.18, "end_s": 3995.62, "action": "Resized and repositioned the AutoCAD window, canceled active commands, and used middle-click navigation on the architectural drawing. Selected drawing geometry near the upper wall area, leaving it highlighted.", "intent": "Inspect and select geometry in the AutoCAD drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in model space."}, {"start_s": 3995.62, "end_s": 4005.765, "action": "Entered the HATCH command and opened the hatch-pattern gallery, then browsed the available pattern options while the drawing remained visible.", "intent": "Prepare to apply a hatch pattern to a drawing region.", "app": "AutoCAD", "details": "Hatch Creation contextual tools were active and the command line requested an internal point or object selection."}, {"start_s": 4005.765, "end_s": 4015.502, "action": "Selected a hatch pattern option and adjusted its displayed scale or preview values, then continued positioning the hatch operation over the upper portion of the drawing.", "intent": "Configure hatch appearance before applying it.", "app": "AutoCAD", "details": "The Hatch Creation ribbon remained active; temporary dimension-like input boxes appeared near the top geometry."}, {"start_s": 4015.502, "end_s": 4024.355, "action": "Navigated and zoomed the drawing while the HATCH command remained active, then reopened the hatch-pattern gallery to browse additional patterns.", "intent": "Review the drawing at a different zoom and choose a hatch pattern.", "app": "AutoCAD", "details": "The view zoomed in on the upper floors and the pattern gallery displayed multiple architectural and ANSI patterns."}, {"start_s": 4024.355, "end_s": 4034.308, "action": "Selected another hatch-pattern option from the gallery and continued adjusting the hatch operation over the zoomed drawing view.", "intent": "Refine the hatch pattern selection and placement.", "app": "AutoCAD", "details": "Hatch Creation remained active with the command line still prompting for hatch boundary input."}, {"start_s": 4034.308, "end_s": 4053.924, "action": "Browsed the hatch-pattern gallery, selected among solid, ANSI, and architectural patterns, and adjusted the hatch settings while navigating the drawing. Left the Hatch Creation command active without a visible completed hatch result.", "intent": "Continue configuring hatch properties for the drawing.", "app": "AutoCAD", "details": "The drawing stayed in model space and the HATCH prompt remained visible."}, {"start_s": 4053.924, "end_s": 4063.888, "action": "Dismissed the hatch boundary-definition error and returned to the Hatch command, then repeatedly adjusted the AutoCAD window and clicked in the drawing area.", "intent": "Recover from the hatch boundary error and continue selecting or defining hatch boundaries.", "app": "AutoCAD", "details": "The dialog reported that a closed boundary could not be determined."}, {"start_s": 4063.888, "end_s": 4073.91, "action": "Kept the Hatch command active, clicked several internal regions of the drawing, and reviewed the resulting highlighted hatch-preview areas while AutoCAD analyzed internal islands.", "intent": "Select internal points for hatch creation in multiple drawing regions.", "app": "AutoCAD", "details": "The command line continued to prompt for an internal point."}, {"start_s": 4073.91, "end_s": 4080.354, "action": "Clicked additional internal points in the drawing, briefly dragged or clicked near lower regions, and pressed Escape repeatedly to cancel the active hatch operation.", "intent": "Continue testing hatch regions, then stop the unsuccessful hatch selection.", "app": "AutoCAD", "details": "The Hatch Creation ribbon disappeared and the command line showed repeated cancellation messages."}, {"start_s": 4080.354, "end_s": 4089.89, "action": "Pressed Escape repeatedly to clear remaining command states and made a couple of middle-button clicks while leaving the drawing displayed without an active command.", "intent": "Reset AutoCAD after cancelling the hatch operation.", "app": "AutoCAD", "details": "The drawing remained visible and the command line showed canceled commands."}, {"start_s": 4089.89, "end_s": 4100.832, "action": "Middle-clicked and scrolled around the drawing to pan or adjust the view, then pressed Escape repeatedly and began entering a new command with the letter E.", "intent": "Reposition the view and prepare a new AutoCAD editing command.", "app": "AutoCAD", "details": "The view changed to a closer inspection of the structural linework."}, {"start_s": 4100.832, "end_s": 4112.145, "action": "Entered and activated the Extend command, clicked several drawing edges or objects to extend them, then pressed Escape repeatedly to end the command.", "intent": "Extend selected linework in the drawing and finish the edit.", "app": "AutoCAD", "details": "The command prompt explicitly asked to select an object to extend or shift-select to trim."}, {"start_s": 4112.145, "end_s": 4119.427, "action": "Activated the TRIM command, clicked several drawing edges, and canceled the active command with repeated Escape presses.", "intent": "Trim selected portions of the AutoCAD drawing.", "app": "AutoCAD", "details": "The TRIM prompt remained visible and the drawing geometry changed slightly."}, {"start_s": 4119.427, "end_s": 4132.788, "action": "Started the DIMLINEAR command, selected extension-line points in the drawing, and canceled the dimension operation after navigating the view.", "intent": "Attempt to add a linear dimension to the drawing.", "app": "AutoCAD", "details": "The command prompt progressed from selecting the first extension-line origin to a canceled dimension-line location."}, {"start_s": 4132.788, "end_s": 4139.416, "action": "Selected points for a linear dimension and previewed a 4'-4\" dimension, then canceled the dimension command.", "intent": "Attempt to place a linear dimension on the drawing.", "app": "AutoCAD", "details": "The temporary 4'-4\" dimension was visible before cancellation."}, {"start_s": 4139.416, "end_s": 4149.64, "action": "Started another DIMLINEAR operation, clicked in the drawing to define extension points, navigated the view, and canceled the command.", "intent": "Attempt to create another linear dimension.", "app": "AutoCAD", "details": "The command repeatedly returned to the first extension-line prompt and ended with canceled commands."}, {"start_s": 4149.64, "end_s": 4167.648, "action": "Undid several recent changes, scrolled and navigated the drawing, then selected a slanted line segment with blue grips.", "intent": "Revert unsuccessful dimension edits and inspect or select drawing geometry.", "app": "AutoCAD", "details": "The selected slanted segment remained highlighted in the final screenshot."}, {"start_s": 4167.648, "end_s": 4179.573, "action": "Started a drawing command, clicked points around the slanted geometry, and canceled the operation with repeated Escape presses.", "intent": "Attempt to modify or construct geometry near the selected slanted segment.", "app": "AutoCAD", "details": "The command prompt ended in a canceled state and no persistent new geometry is evident."}, {"start_s": 4179.573, "end_s": 4186.275, "action": "Entered the DIMLINEAR command, interacted with the extension-line origin prompts, then canceled the unfinished dimension operation.", "intent": "Attempt to create or adjust a linear dimension in the drawing.", "app": "AutoCAD", "details": "The command prompt ended with repeated Cancel messages."}, {"start_s": 4186.275, "end_s": 4200.005, "action": "Entered a distance value, selected geometry, and attempted an OFFSET operation; canceled the operation after selecting and manipulating a line.", "intent": "Offset a selected drawing element by a specified distance.", "app": "AutoCAD", "details": "A line was visibly selected near the end of the span, and the command history shows a canceled offset."}, {"start_s": 4200.005, "end_s": 4204.319, "action": "Canceled active prompts, clicked the selected slanted line, and left it selected while beginning another command entry.", "intent": "Inspect or modify the selected slanted line.", "app": "AutoCAD", "details": "The slanted line remained highlighted with blue grips."}, {"start_s": 4204.319, "end_s": 4219.83, "action": "Started OFFSET, entered a distance of 3, then navigated and clicked around the drawing before canceling the command; panned or zoomed the view using middle-button interactions.", "intent": "Offset drawing geometry and reposition the view for continued editing.", "app": "AutoCAD", "details": "The view shifted to a wider drawing area, and the command history shows repeated cancellations."}, {"start_s": 4219.83, "end_s": 4228.724, "action": "Started the LINE command, clicked and dragged in the drawing, then canceled the unfinished line and navigated the view with middle-button clicks and scrolls.", "intent": "Attempt to add a line segment in the drawing.", "app": "AutoCAD", "details": "The LINE prompt requested a first point before the operation was canceled."}, {"start_s": 4228.724, "end_s": 4233.061, "action": "Started OFFSET and entered the distance 3'-6\" in the dynamic input field, leaving the command active for the next selection.", "intent": "Prepare to offset drawing geometry by 3'-6\".", "app": "AutoCAD", "details": "The dynamic input visibly displayed the offset distance 3'-6\"."}, {"start_s": 4233.061, "end_s": 4237.974, "action": "Activated AutoCAD and continued an OFFSET operation, entering a distance and selecting points on the drawing; pressed Escape repeatedly and began another command.", "intent": "Modify the drawing geometry with offset operations.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the command prompt showed OFFSET."}, {"start_s": 4237.974, "end_s": 4242.76, "action": "Entered and activated EXTEND, selected or dragged across geometry, then pressed Escape while the command remained at a fence-point prompt.", "intent": "Extend selected drawing lines to nearby boundaries.", "app": "AutoCAD", "details": "The command prompt showed EXTEND and later requested the next fence point."}, {"start_s": 4242.76, "end_s": 4256.107, "action": "Entered TRIM, selected multiple drawing segments and fence points, and trimmed geometry across the left and central portion of the drawing.", "intent": "Remove unwanted portions of intersecting lines.", "app": "AutoCAD", "details": "The TRIM prompt remained active while several line segments were modified."}, {"start_s": 4256.107, "end_s": 4261.106, "action": "Canceled the active trim operation, entered LINE, and initiated a first-point selection before canceling the command.", "intent": "Attempt to create a line, then abandon the incomplete operation.", "app": "AutoCAD", "details": "The command history showed repeated Cancel entries."}, {"start_s": 4261.106, "end_s": 4265.94, "action": "Entered OFFSET with the displayed distance of 3'-6\", selected a slanted line, and indicated a side for the offset.", "intent": "Create a parallel offset line in the drawing.", "app": "AutoCAD", "details": "The OFFSET prompt changed from distance entry to object and side selection."}, {"start_s": 4265.94, "end_s": 4272.191, "action": "Canceled the prior offset, started OFFSET again, entered a 1-foot distance, and left the command awaiting object selection.", "intent": "Begin another offset operation using a one-foot distance.", "app": "AutoCAD", "details": "The command prompt showed OFFSET with distance 1' and requested an object to offset."}, {"start_s": 4272.191, "end_s": 4277.714, "action": "Activated AutoCAD and entered commands while the OFFSET prompt requested a distance; typed values and repeatedly pressed Escape, leaving the command state active.", "intent": "Adjust or cancel an offset operation in the drawing.", "app": "AutoCAD", "details": "Drawing1.dwg showed the OFFSET command with a distance prompt."}, {"start_s": 4277.714, "end_s": 4283.045, "action": "Entered an offset distance of 1, then clicked and dragged near the left slanted geometry. Pressed Escape repeatedly, returning the OFFSET command to its object-selection prompt.", "intent": "Create or test an offset from the left-side drawing geometry.", "app": "AutoCAD", "details": "The OFFSET prompt changed from distance entry to \u201cSelect object to offset.\u201d"}, {"start_s": 4283.045, "end_s": 4291.755, "action": "Canceled the offset operation, started TRIM, and clicked near the left slanted lines and lower geometry. Scrolled and middle-clicked around the drawing, then pressed Escape repeatedly to cancel the active commands.", "intent": "Trim or inspect portions of the drawing geometry.", "app": "AutoCAD", "details": "TRIM was active and the view was repositioned/zoomed during the operation."}, {"start_s": 4291.755, "end_s": 4306.715, "action": "Started EXTEND and clicked several points along the horizontal and slanted linework, using fence-style selection prompts. Pressed Escape repeatedly, leaving the drawing with adjusted line intersections and the command canceled.", "intent": "Extend selected drawing lines to nearby boundaries.", "app": "AutoCAD", "details": "The EXTEND prompt and multiple \u201cSpecify next fence point\u201d messages were visible."}, {"start_s": 4306.715, "end_s": 4319.14, "action": "Continued TRIM, clicking and dragging across several horizontal and slanted elements while scrolling and middle-clicking to navigate the view. Pressed Escape repeatedly, ending with a zoomed-out view of the full facade-like drawing.", "intent": "Trim excess line segments and review the resulting geometry.", "app": "AutoCAD", "details": "The TRIM prompt remained active before cancellation; the final view showed multiple repeated horizontal elements."}, {"start_s": 4319.14, "end_s": 4326.518, "action": "Entered HATCH and displayed the Hatch Creation ribbon with a \u201cPick internal point\u201d prompt, then clicked within the drawing and canceled the hatch operation with Escape.", "intent": "Attempt to hatch an enclosed region of the drawing.", "app": "AutoCAD", "details": "Hatch Creation was active briefly; no persistent hatch fill was visible after cancellation."}, {"start_s": 4326.518, "end_s": 4334.206, "action": "Activated TRIM, selected and dragged across several drawing lines, then zoomed or panned the view and canceled the command.", "intent": "Trim or inspect overlapping linework in the drawing.", "app": "AutoCAD 2021", "details": "The TRIM prompt remained visible while the view changed from a close-up to a wider drawing view."}, {"start_s": 4334.206, "end_s": 4349.161, "action": "Started and canceled drawing commands, clicked and middle-clicked around the linework, and adjusted the view; the drawing ended in a wider view with a line tooltip visible.", "intent": "Inspect or modify selected linework while navigating the drawing.", "app": "AutoCAD 2021", "details": "The command history shows repeated cancellations and the final view displays the architectural line drawing."}, {"start_s": 4349.161, "end_s": 4355.919, "action": "Entered HATCH and opened the Hatch Creation ribbon, leaving the pattern gallery visible while the drawing remained unchanged.", "intent": "Prepare to apply a hatch pattern to an enclosed drawing region.", "app": "AutoCAD 2021", "details": "Hatch Creation shows Pick Points and a gallery of pattern choices; no hatch fill is visibly applied yet."}, {"start_s": 4355.919, "end_s": 4364.95, "action": "Scrolled through the open hatch pattern gallery to browse additional pattern options.", "intent": "Find a suitable hatch pattern.", "app": "AutoCAD 2021", "details": "The gallery changed from architectural patterns to gradient and material-style options such as GRASS, GRATE, GRAVEL, HEX, HONEY, and HOUND."}, {"start_s": 4364.95, "end_s": 4375.194, "action": "Clicked repeatedly in the Hatch Creation properties area, adjusting the visible hatch settings while keeping the pattern gallery open.", "intent": "Configure hatch properties before selecting an internal point.", "app": "AutoCAD 2021", "details": "The hatch command still prompts for an internal point, and the visible numeric field ends at 2."}, {"start_s": 4375.194, "end_s": 4385.177, "action": "Continued clicking and dragging the hatch property control, leaving Hatch Creation active with the drawing unchanged and the internal-point prompt still present.", "intent": "Continue adjusting hatch settings.", "app": "AutoCAD 2021", "details": "No completed hatch fill is visible; the pattern gallery and Hatch Creation controls remain open."}, {"start_s": 4385.177, "end_s": 4395.987, "action": "Clicked and dragged repeatedly in the Hatch Creation ribbon, then resized and repositioned the AutoCAD window while the hatch command remained active.", "intent": "Adjust hatch settings or placement in the drawing.", "app": "AutoCAD", "details": "The drawing remained visible with Hatch Creation active and the command line prompting for an internal point or object selection."}, {"start_s": 4395.987, "end_s": 4406.698, "action": "Continued clicking the Hatch Creation controls and resizing the AutoCAD window; the visible hatch setting value advanced from 2 to 5.", "intent": "Iterate hatch settings while preparing the hatch pattern.", "app": "AutoCAD", "details": "The architectural drawing stayed unchanged while Hatch Creation remained active."}, {"start_s": 4406.698, "end_s": 4416.919, "action": "Clicked and dragged in the Hatch Creation ribbon, resized the window several times, and changed the visible hatch setting value from 5 through 6 to 7; a dense crosshatched strip briefly appeared along the right side of the drawing.", "intent": "Preview or adjust the hatch pattern and its placement.", "app": "AutoCAD", "details": "Hatch Creation remained active with the command line prompting for an internal point."}, {"start_s": 4416.919, "end_s": 4426.786, "action": "Waited through repeated window resizing, then clicked within the right-side hatched area and used Escape and middle-click interactions to cancel or navigate the active hatch operation.", "intent": "Select or cancel the hatch operation in the drawing.", "app": "AutoCAD", "details": "The right-side region became highlighted and AutoCAD displayed hatch analysis/selection feedback before the operation was dismissed."}, {"start_s": 4426.786, "end_s": 4435.249, "action": "Scrolled and pressed Escape several times, then middle-clicked around the drawing to cancel remaining commands and exit the Hatch Creation context; the view changed to a closer zoom of the structure.", "intent": "Cancel the hatch workflow and inspect the drawing.", "app": "AutoCAD", "details": "The ribbon returned to the standard Home tools and the command line showed repeated Cancel messages."}, {"start_s": 4435.249, "end_s": 4451.452, "action": "Pressed Undo and Escape, middle-clicked around the drawing, and zoomed in substantially on the horizontal structural elements; the command line showed undo activity and then canceled commands.", "intent": "Undo or remove hatch-related changes and review the drawing at closer scale.", "app": "AutoCAD", "details": "The final view was a close-up of several horizontal members, with no visible hatch fill and the standard AutoCAD ribbon active."}, {"start_s": 4451.452, "end_s": 4462.153, "action": "Activated AutoCAD, started the LINE command, and clicked points along the drawing while panning or zooming the view.", "intent": "Add line geometry to the drawing.", "app": "AutoCAD", "details": "The command remained active and prompted for the next point."}, {"start_s": 4462.153, "end_s": 4472.738, "action": "Continued navigating the drawing, then pressed Escape repeatedly to cancel the active line operation and returned to a broader view.", "intent": "Cancel the unfinished line operation and review the drawing.", "app": "AutoCAD", "details": "The command history shows repeated *Cancel* entries."}, {"start_s": 4472.738, "end_s": 4477.17, "action": "Pressed Escape and entered an unrecognized command, leaving the drawing unchanged.", "intent": "Attempt to exit the current state or invoke a command.", "app": "AutoCAD", "details": "The command line reports Unknown command \"HH\"."}, {"start_s": 4477.17, "end_s": 4487.01, "action": "Entered the HATCH command and navigated the hatch-creation controls while the drawing prompted for an internal point.", "intent": "Prepare to apply a hatch pattern to an enclosed drawing region.", "app": "AutoCAD", "details": "The Hatch Creation contextual tab is visible with Pick Points active."}, {"start_s": 4487.01, "end_s": 4498.097, "action": "Opened the hatch pattern gallery and clicked within the pattern controls, changing the displayed hatch settings while keeping HATCH active.", "intent": "Choose or adjust a hatch pattern before placing it.", "app": "AutoCAD", "details": "The gallery shows patterns including AR-B88, AR-BRELM, AR-BRSTD, AR-CONC, BRICK, and others."}, {"start_s": 4498.097, "end_s": 4507.5, "action": "Selected the BRICK hatch pattern and continued moving or adjusting the hatch preview without completing the hatch placement.", "intent": "Configure the brick hatch for the drawing.", "app": "AutoCAD", "details": "The Hatch Creation tab remains open with pattern scale shown as 2 and the prompt still requests an internal point."}, {"start_s": 4507.5, "end_s": 4517.485, "action": "Adjusted the AutoCAD view through repeated window resizing, dragging, and scrolling while the HATCH command remained active; ended on a closer view of the wall and horizontal elements.", "intent": "Navigate and inspect the drawing while preparing to pick an internal hatch point.", "app": "AutoCAD", "details": "Hatch Creation ribbon remained visible with the prompt to pick an internal point."}, {"start_s": 4517.485, "end_s": 4527.566, "action": "Changed the hatch property value from 1 to 2, resized and navigated the drawing, then zoomed out and panned to show the full elevation.", "intent": "Modify the active hatch setting and reposition the view for inspection.", "app": "AutoCAD", "details": "The drawing ended in a smaller centered view; the HATCH command was still active."}, {"start_s": 4527.566, "end_s": 4537.704, "action": "Panned and zoomed the AutoCAD drawing while the HATCH command remained active; the view shifted from a smaller elevation to a closer view, and a dense hatch pattern became visible along the right side.", "intent": "Inspect the drawing and locate an area for hatch placement.", "app": "AutoCAD", "details": "No explicit hatch point selection was confirmed."}, {"start_s": 4537.704, "end_s": 4555.583, "action": "Exited the active hatch operation with repeated Escape presses, navigated and zoomed the drawing, and switched back to the standard Home ribbon; then clicked in the drawing and began an erase command.", "intent": "Cancel the hatch workflow and begin editing the drawing geometry.", "app": "AutoCAD", "details": "The command line showed repeated Cancel messages and the drawing remained visible at a reduced scale."}, {"start_s": 4555.583, "end_s": 4565.488, "action": "Activated AutoCAD, canceled the prior command, entered the ERASE command, selected one object, and then entered EXTEND; clicked several drawing elements while the extend prompt was active.", "intent": "Edit the elevation geometry by erasing an object and attempting to extend another element.", "app": "AutoCAD", "details": "The command line showed \u201cERASE 1 found,\u201d followed by EXTEND with the prompt to select an object to extend."}, {"start_s": 4565.488, "end_s": 4578.721, "action": "Canceled the EXTEND operation, clicked and panned across several horizontal elements, scrolled to reposition the view, and repeatedly pressed Escape to clear commands.", "intent": "Inspect or adjust drawing elements while abandoning the active modification command.", "app": "AutoCAD", "details": "The final view was repositioned toward the upper portion of the elevation, with the command line showing canceled commands."}, {"start_s": 4578.721, "end_s": 4591.952, "action": "Reactivated AutoCAD, resized and repositioned the drawing view, and repeatedly canceled the active LINE command while navigating the architectural drawing.", "intent": "Adjust the AutoCAD view and clear an unfinished drawing command.", "app": "AutoCAD", "details": "The command line repeatedly showed LINE and \u201cSpecify first point\u201d; no completed line is evident."}, {"start_s": 4591.952, "end_s": 4596.817, "action": "Entered an offset distance of 1'-3\" in the active OFFSET command and left AutoCAD waiting for an object selection.", "intent": "Set the offset distance for a drawing modification.", "app": "AutoCAD", "details": "The command line displayed OFFSET with the entered distance and \u201cSelect object to offset.\u201d"}, {"start_s": 4596.817, "end_s": 4601.694, "action": "Entered an offset distance of 2'-6\" and clicked the drawing, then canceled the OFFSET operation and returned to object selection.", "intent": "Attempt an offset operation on the architectural drawing.", "app": "AutoCAD", "details": "The command line showed the 2'-6\" distance followed by \u201cSelect object to offset.\u201d"}, {"start_s": 4601.694, "end_s": 4609.615, "action": "Entered an offset distance of 3'-6\", clicked the drawing, and canceled the OFFSET command without a clearly completed result.", "intent": "Continue testing an offset distance on the drawing.", "app": "AutoCAD", "details": "The command line showed 3'-6\" and then returned to \u201cSelect object to offset\u201d before repeated cancellations."}, {"start_s": 4609.615, "end_s": 4618.903, "action": "Entered an offset distance of 5', clicked and dragged on the drawing several times, then canceled the active OFFSET command.", "intent": "Attempt another offset modification and clear the command.", "app": "AutoCAD", "details": "The command line showed 5' and \u201cSelect object to offset\u201d; the final view showed the drawing without an active command."}, {"start_s": 4618.903, "end_s": 4626.682, "action": "Entered an offset distance of 7', clicked and dragged near the upper-left geometry, canceled several commands, and selected a rectangular crossing area around the upper-left lines.", "intent": "Modify or select upper-left drawing geometry after offset attempts.", "app": "AutoCAD", "details": "The final screenshot showed blue grips on the selected upper-left geometry and a crossing-selection prompt."}, {"start_s": 4626.682, "end_s": 4635.517, "action": "Activated AutoCAD, issued drawing commands, clicked and panned around the architectural elevation, then repeatedly canceled active prompts. Left the LINE command waiting for a first point.", "intent": "Navigate the drawing and reset command state while preparing to draw.", "app": "AutoCAD 2021", "details": "Architectural elevation remained visible; the command area ended with repeated Cancel messages and a LINE first-point prompt."}, {"start_s": 4635.517, "end_s": 4645.582, "action": "Entered coordinate-like input, clicked and dragged near the upper portion of the elevation, then canceled the active offset/selection operation and panned the view.", "intent": "Attempt an offset or related edit near the upper drawing lines, then abandon it.", "app": "AutoCAD 2021", "details": "The prompt showed 'Specify point on side to offset' and 'Select object to offset' before cancellation."}, {"start_s": 4645.582, "end_s": 4651.251, "action": "Canceled the current AutoCAD operation, middle-clicked to pan the view, and left the architectural elevation displayed with the command line cleared by cancellation.", "intent": "Stop the pending operation and reposition or review the drawing.", "app": "AutoCAD 2021", "details": "No confirmed geometry change was visible."}, {"start_s": 4651.251, "end_s": 4655.915, "action": "Resized and repositioned the AutoCAD view, invoked LINE, and left the command awaiting a first point before canceling.", "intent": "Prepare another line-drawing attempt near the upper horizontal elements.", "app": "AutoCAD 2021", "details": "Dynamic input displayed 'Specify first point' with coordinate fields."}, {"start_s": 4655.915, "end_s": 4665.065, "action": "Kept the LINE command active while moving the cursor around the upper horizontal lines and adjusting the view; did not complete a first-point selection.", "intent": "Position the cursor precisely for a new line.", "app": "AutoCAD 2021", "details": "The drawing remained unchanged and the prompt continued to request the first point."}, {"start_s": 4665.065, "end_s": 4674.894, "action": "Continued moving and resizing the AutoCAD view while the LINE command remained active, leaving the cursor near the upper horizontal lines without placing a point.", "intent": "Continue positioning for line creation.", "app": "AutoCAD 2021", "details": "Dynamic input still showed 'Specify first point'; no completed line was evident."}, {"start_s": 4674.894, "end_s": 4689.107, "action": "Resized and repositioned the AutoCAD window, clicked in the drawing, and repeatedly canceled active commands while panning or reviewing the architectural linework.", "intent": "Inspect the drawing and clear unintended command states.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in model space."}, {"start_s": 4689.107, "end_s": 4694.211, "action": "Activated the LINE command and left it waiting for a first point, then canceled and restarted the command through keyboard input.", "intent": "Prepare to draw a line in the architectural drawing.", "app": "AutoCAD", "details": "The command prompt visibly showed \u201cLINE Specify first point.\u201d"}, {"start_s": 4694.211, "end_s": 4704.189, "action": "Kept AutoCAD active with minor window movements while the LINE command remained at the \u201cSpecify first point\u201d prompt.", "intent": "Continue positioning before placing a line endpoint.", "app": "AutoCAD", "details": "No line was visibly completed during this interval."}, {"start_s": 4704.189, "end_s": 4723.7, "action": "Moved the cursor around the drawing, clicked near the upper-right geometry, and repeatedly canceled or cleared the active LINE prompt without visibly completing a segment.", "intent": "Attempt to position or start linework while managing the active command.", "app": "AutoCAD", "details": "The drawing stayed in model space with the LINE first-point prompt visible."}, {"start_s": 4723.7, "end_s": 4734.004, "action": "Entered EXTEND, selected or fence-selected geometry with several clicks and drags, and left the command waiting for another fence point.", "intent": "Extend drawing elements to nearby boundary geometry.", "app": "AutoCAD", "details": "The command prompt showed EXTEND and \u201cSpecify next fence point or [Undo].\u201d"}, {"start_s": 4734.004, "end_s": 4744.029, "action": "Entered TRIM, clicked and dragged across several drawing areas while zooming or panning, and left the trim command active awaiting another object selection.", "intent": "Trim excess portions of the architectural linework.", "app": "AutoCAD", "details": "The command prompt showed TRIM with \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 4744.029, "end_s": 4759.832, "action": "Adjusted the AutoCAD window, clicked within the drawing, and repeatedly canceled the active TRIM operation, returning the command line to an idle state.", "intent": "Cancel the current editing command and reposition the AutoCAD workspace.", "app": "AutoCAD", "details": "The drawing remained visible with TRIM prompts initially and Cancel messages by the end."}, {"start_s": 4759.832, "end_s": 4764.612, "action": "Activated AutoCAD, entered LINE and then EXTEND commands, selected points or objects in the drawing, and canceled the operation.", "intent": "Edit the drawing geometry using line and extend tools.", "app": "AutoCAD", "details": "The command line showed LINE awaiting a first point, followed by EXTEND awaiting object selection."}, {"start_s": 4764.612, "end_s": 4771.341, "action": "Entered an offset-related command, supplied an offset distance, clicked and dragged on the drawing, then canceled the active operation.", "intent": "Create or adjust parallel drawing geometry with OFFSET.", "app": "AutoCAD", "details": "The OFFSET prompt showed a distance of 2'-6\" and later awaited object selection."}, {"start_s": 4771.341, "end_s": 4780.407, "action": "Switched back into AutoCAD, continued selecting or editing drawing geometry with EXTEND, and repeatedly canceled the command.", "intent": "Modify existing linework with the extend tool.", "app": "AutoCAD", "details": "The drawing view shifted slightly while EXTEND remained active, then the command was canceled."}, {"start_s": 4780.407, "end_s": 4787.956, "action": "Entered a dimension-related command, selected points in the drawing, adjusted the view with scrolling, and left the command active for a second extension-line origin.", "intent": "Add a linear dimension to the drawing.", "app": "AutoCAD", "details": "The command line displayed DIMLINEAR, and the prompt requested the second extension line origin."}, {"start_s": 4787.956, "end_s": 4796.58, "action": "Navigated to the right side of the drawing, canceled prior commands, and started a new LINE command at the upper edge of the patterned structure.", "intent": "Continue editing the right-side drawing geometry.", "app": "AutoCAD", "details": "The final view focused on the right-side patterned wall, with LINE awaiting its first point."}, {"start_s": 4796.58, "end_s": 4800.924, "action": "Switched to AutoCAD, interacted with the drawing near the upper-right geometry, and canceled the active LINE command with Escape.", "intent": "Continue or reset drawing input near the selected geometry.", "app": "AutoCAD", "details": "The command line ended with multiple Cancel messages."}, {"start_s": 4800.924, "end_s": 4807.831, "action": "Started OFFSET, entered a distance of 3'6\", and clicked drawing geometry, then canceled the command and began another input.", "intent": "Create an offset of the selected architectural linework.", "app": "AutoCAD", "details": "OFFSET prompts showed the entered distance and then requested an object to offset."}, {"start_s": 4807.831, "end_s": 4811.987, "action": "Canceled the pending offset interaction, selected upper-right linework, and left the drawing with the geometry highlighted before beginning another command.", "intent": "Adjust or inspect the upper-right drawing geometry.", "app": "AutoCAD", "details": "Blue grips appeared on the selected vertical and horizontal linework."}, {"start_s": 4811.987, "end_s": 4819.489, "action": "Canceled prior input, started EXTEND, and clicked around the upper-right boundaries before canceling the operation.", "intent": "Extend architectural lines to nearby boundary edges.", "app": "AutoCAD", "details": "The command line showed EXTEND and the prompt to select an object to extend or shift-select to trim."}, {"start_s": 4819.489, "end_s": 4824.352, "action": "Started OFFSET, entered a distance of 1, clicked drawing objects to preview or apply the offset, and canceled the command.", "intent": "Create a one-unit offset of the upper-right linework.", "app": "AutoCAD", "details": "The command line returned to Select object to offset after the clicks and cancellations."}, {"start_s": 4824.352, "end_s": 4843.413, "action": "Started TRIM, clicked and dragged across multiple areas of the drawing while navigating the view, and left TRIM active awaiting another object selection.", "intent": "Trim intersecting architectural linework using the current cutting edges.", "app": "AutoCAD", "details": "The final view was zoomed into line intersections, with the prompt to select an object to trim or shift-select to extend."}, {"start_s": 4843.413, "end_s": 4849.296, "action": "Activated AutoCAD, resized the drawing window repeatedly, started the LINE command, and clicked points near the upper portion of the elevation. Pressed Escape several times and began another command.", "intent": "Edit the architectural elevation with linework.", "app": "AutoCAD 2021", "details": "LINE was active and showed first-point/next-point prompts; the drawing view remained on the elevation."}, {"start_s": 4849.296, "end_s": 4854.0, "action": "Entered a numeric value while switching between AutoCAD\u2019s dynamic input and drawing window, then started OFFSET and supplied a distance of 2. Clicked in the drawing and canceled back to the offset object-selection prompt.", "intent": "Create an offset element in the elevation.", "app": "AutoCAD 2021", "details": "OFFSET displayed a distance entry and then prompted to select an object."}, {"start_s": 4854.0, "end_s": 4861.651, "action": "Entered an offset distance of 6, selected and clicked around the upper horizontal geometry, and dragged across the drawing. Canceled the operation and left a horizontal element selected in a zoomed view.", "intent": "Offset and adjust upper horizontal drawing geometry.", "app": "AutoCAD 2021", "details": "The command line showed OFFSET with distance 6 and a point-on-side prompt; the final view showed a selected horizontal line."}, {"start_s": 4861.651, "end_s": 4868.175, "action": "Canceled active commands, used middle-button navigation and scrolling to reposition the elevation, then issued ERASE and removed one object. Continued canceling commands while reviewing the resulting view.", "intent": "Remove an unwanted drawing element and inspect the elevation.", "app": "AutoCAD 2021", "details": "The command line explicitly reported ERASE 1 found."}, {"start_s": 4868.175, "end_s": 4874.471, "action": "Entered and activated EXTEND, navigated and zoomed toward the upper-right geometry, then selected an object to extend. Canceled the command after the extend prompt remained active.", "intent": "Extend a line toward the adjacent boundary in the elevation.", "app": "AutoCAD 2021", "details": "EXTEND prompted to select an object to extend or trim."}, {"start_s": 4874.471, "end_s": 4880.581, "action": "Continued EXTEND, clicked and dragged across several objects near the upper-right and brick-patterned edge, and attempted to extend a line. AutoCAD reported that the object could not be extended, after which the command was canceled.", "intent": "Attempt to extend upper-right elevation geometry to a boundary.", "app": "AutoCAD 2021", "details": "A visible tooltip stated \u201cCannot EXTEND this object.\u201d"}, {"start_s": 4880.581, "end_s": 4898.699, "action": "Activated AutoCAD, entered the Trim command, and repeatedly clicked and navigated around the drawing while the prompt asked to select objects to trim or extend. Pressed Escape several times to cancel or clear the active operation.", "intent": "Trim or inspect drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space; no clearly completed trim is visible."}, {"start_s": 4898.699, "end_s": 4905.143, "action": "Started the Offset command, entered an offset distance of 2, and clicked to specify the side for the offset. Pressed Escape repeatedly, leaving the command interaction active or canceled.", "intent": "Create a parallel copy of selected drawing geometry at a distance of 2.", "app": "Autodesk AutoCAD 2021", "details": "The dynamic prompt showed \u201cSpecify point on side to offset\u201d after the distance was entered."}, {"start_s": 4905.143, "end_s": 4909.591, "action": "Canceled the prior command sequence, then initiated Offset again and entered a distance of 2 while AutoCAD displayed the offset-distance prompt.", "intent": "Prepare another offset operation on the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The offset distance field visibly contained 2; no object selection or completed offset is shown."}, {"start_s": 4909.591, "end_s": 4916.15, "action": "Confirmed the offset distance and clicked near the upper horizontal geometry to specify the side for the offset; continued with the offset prompt and began another keyboard entry at the end of the span.", "intent": "Offset the selected upper drawing line or edge.", "app": "Autodesk AutoCAD 2021", "details": "AutoCAD remained at \u201cSpecify point on side to offset,\u201d with the entered distance displayed as 2'-6\"."}, {"start_s": 4916.15, "end_s": 4932.241, "action": "Selected and repeatedly clicked along drawing geometry while the Offset command prompted for additional objects and side points, producing repeated offset-preview geometry. Pressed Escape multiple times to cancel the command sequence.", "intent": "Apply offsets to multiple architectural drawing elements.", "app": "Autodesk AutoCAD 2021", "details": "The view showed expanded architectural linework and repeated offset prompts; the final screenshot showed the command line canceled."}, {"start_s": 4932.241, "end_s": 4936.335, "action": "Reactivated the Offset command and entered 2 into the offset-distance field while viewing the architectural drawing.", "intent": "Set up another offset operation with distance 2.", "app": "Autodesk AutoCAD 2021", "details": "The command remained at the offset-distance prompt, with no subsequent object selection visible."}, {"start_s": 4936.335, "end_s": 4946.348, "action": "Activated AutoCAD, continued the OFFSET command, entered a distance, and clicked around the upper drawing geometry to select objects and indicate the offset side.", "intent": "Create offset geometry in the upper portion of the drawing.", "app": "AutoCAD", "details": "OFFSET prompts remained active while the drawing view and dynamic input updated."}, {"start_s": 4946.348, "end_s": 4956.158, "action": "Clicked repeatedly near the upper geometry, then pressed Escape several times to cancel the active command and used middle-button navigation to zoom or pan outward.", "intent": "Stop the offset operation and reposition the drawing view.", "app": "AutoCAD", "details": "The command line showed repeated Cancel entries and the view became more zoomed out."}, {"start_s": 4956.158, "end_s": 4966.015, "action": "Used middle-button navigation and scrolling to zoom farther out, reducing the building elevation to a smaller centered view.", "intent": "Review the overall drawing and adjust the viewport.", "app": "AutoCAD", "details": "The elevation and its repeated horizontal elements remained visible at a reduced scale."}, {"start_s": 4966.015, "end_s": 4984.091, "action": "Continued panning and zooming around the elevation, pressed Escape to cancel transient commands, and ended with the drawing repositioned and enlarged toward the upper structure.", "intent": "Inspect different portions of the elevation while navigating the model space.", "app": "AutoCAD", "details": "The view shifted through several scales; command prompts were canceled during navigation."}, {"start_s": 4984.091, "end_s": 4989.47, "action": "Activated dynamic input, navigated the view briefly, then typed command input that opened OFFSET and entered a distance of 2'-6\".", "intent": "Start another offset operation with a specified distance.", "app": "AutoCAD", "details": "The OFFSET prompt visibly showed the entered distance 2'-6\"."}, {"start_s": 4989.47, "end_s": 4995.123, "action": "Entered an offset distance of 4, clicked the upper horizontal line, and indicated the side for the offset; then pressed Escape to cancel or exit the operation.", "intent": "Offset the selected upper line by the entered distance.", "app": "AutoCAD", "details": "The command line showed the distance 4 and prompts for selecting the object and side to offset."}, {"start_s": 4995.123, "end_s": 4999.792, "action": "Switched to AutoCAD, resized the drawing window, and pressed Escape repeatedly to cancel active commands or prompts.", "intent": "Clear the current AutoCAD command state.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible with the architectural line drawing."}, {"start_s": 4999.792, "end_s": 5004.892, "action": "Started the LINE command, clicked a first point near the upper horizontal structure, and canceled the unfinished line sequence with repeated Escape presses.", "intent": "Begin and then abandon a line segment.", "app": "AutoCAD", "details": "The command line showed LINE and prompted for the next point before cancellation."}, {"start_s": 5004.892, "end_s": 5010.096, "action": "Continued the LINE command by clicking near the right end of the upper structure, then pressed Escape repeatedly to cancel the operation.", "intent": "Attempt to extend the upper drawing element with a line.", "app": "AutoCAD", "details": "The temporary line preview and next-point prompt disappeared after cancellation."}, {"start_s": 5010.096, "end_s": 5014.418, "action": "Entered the OFFSET command and supplied an offset distance of 4'-0\" while the drawing remained focused on the upper horizontal element.", "intent": "Set up an offset operation for the selected drawing geometry.", "app": "AutoCAD", "details": "The command line and dynamic input displayed the offset-distance prompt."}, {"start_s": 5014.418, "end_s": 5019.611, "action": "Clicked the upper horizontal geometry to continue OFFSET, then pressed Escape repeatedly and canceled the operation.", "intent": "Attempt to offset the upper drawing element, then abandon it.", "app": "AutoCAD", "details": "The command line ended with canceled prompts and the drawing returned to its prior appearance."}, {"start_s": 5019.611, "end_s": 5032.616, "action": "Entered an offset distance of 10'-0\", selected the upper horizontal geometry, and clicked on both sides to create offset lines; then pressed Escape to exit the command.", "intent": "Create multiple parallel offsets around the upper structure.", "app": "AutoCAD", "details": "The final view shows additional vertical divisions in the upper rectangular element, with the command canceled afterward."}, {"start_s": 5032.616, "end_s": 5044.891, "action": "Activated AutoCAD, adjusted the drawing view and attempted trim selections on the upper geometry, then canceled the active command.", "intent": "Modify or clean up drawing geometry using Trim.", "app": "Autodesk AutoCAD 2021", "details": "The Trim prompt was visible, followed by several selections and repeated Esc cancellations."}, {"start_s": 5044.891, "end_s": 5052.677, "action": "Adjusted the view and clicked the upper horizontal geometry, then canceled the active AutoCAD operation.", "intent": "Inspect or modify the upper drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible with the command line showing repeated cancellations."}, {"start_s": 5052.677, "end_s": 5057.425, "action": "Zoomed or repositioned the drawing and initiated Offset, leaving AutoCAD prompting for an offset distance.", "intent": "Create a parallel copy of selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The Offset prompt showed a default distance of 10'-0\"."}, {"start_s": 5057.425, "end_s": 5064.697, "action": "Entered an offset distance and worked through the Offset command, then canceled it without selecting another object.", "intent": "Apply a specified offset to the upper geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed an offset distance entry and later returned to the object-selection prompt before cancellation."}, {"start_s": 5064.697, "end_s": 5069.986, "action": "Entered another offset distance, clicked the upper horizontal geometry, and canceled the Offset command.", "intent": "Test or apply another offset to the upper drawing element.", "app": "Autodesk AutoCAD 2021", "details": "The offset prompt displayed a distance of 2'-5\" before the operation was canceled."}, {"start_s": 5069.986, "end_s": 5078.575, "action": "Entered a further offset distance and clicked the upper geometry, then canceled the active Offset operation.", "intent": "Create or test a parallel offset of the upper linework.", "app": "Autodesk AutoCAD 2021", "details": "The Offset command displayed a 3'-0\" distance and returned to the object-selection prompt after cancellation."}, {"start_s": 5078.575, "end_s": 5083.918, "action": "Entered an offset distance of 4, selected an object, and canceled the active OFFSET command with repeated Escape presses.", "intent": "Offset a drawing element by a specified distance.", "app": "AutoCAD", "details": "OFFSET prompt and architectural linework were visible."}, {"start_s": 5083.918, "end_s": 5088.872, "action": "Entered an offset distance of 6, selected an object, and dragged or clicked to provide the offset side, leaving OFFSET ready for another object.", "intent": "Create another offset in the drawing.", "app": "AutoCAD", "details": "The command line showed a 6-foot offset and the prompt to select an object."}, {"start_s": 5088.872, "end_s": 5105.876, "action": "Selected and offset drawing elements with repeated clicks and middle-button navigation, then canceled the active commands and zoomed out to show more of the drawing.", "intent": "Apply offsets to architectural linework and review the resulting geometry.", "app": "AutoCAD", "details": "A 6-foot dimension was visible during the offset operation; the later view showed a smaller overall drawing."}, {"start_s": 5105.876, "end_s": 5111.5, "action": "Continued the OFFSET command, entered and edited a distance value beginning with 56, and left the distance prompt active.", "intent": "Set an offset distance for the next drawing operation.", "app": "AutoCAD", "details": "The dynamic input field displayed 56 while OFFSET requested a distance."}, {"start_s": 5111.5, "end_s": 5123.189, "action": "Selected drawing geometry, canceled several active commands, then initiated a window-selection operation that left a horizontal line selected with blue grips.", "intent": "Select and manipulate architectural linework after offset attempts.", "app": "AutoCAD", "details": "The final view showed a selected horizontal line and a command prompt for specifying the opposite corner."}, {"start_s": 5123.189, "end_s": 5129.029, "action": "Canceled the selection operation, reactivated OFFSET, and left the dynamic input field showing a 5-foot offset distance.", "intent": "Prepare another offset operation on the drawing.", "app": "AutoCAD", "details": "OFFSET was active with the distance field selected and displaying 5'-0\"."}, {"start_s": 5129.029, "end_s": 5142.093, "action": "Repositioned and resized the AutoCAD window, clicked within the drawing, and repeatedly canceled active commands, leaving the architectural linework visible.", "intent": "Clear or exit active AutoCAD commands while reviewing the drawing.", "app": "AutoCAD", "details": null}, {"start_s": 5142.093, "end_s": 5159.208, "action": "Activated the Line command, selected a first point near the upper horizontal line, adjusted the view, and canceled the unfinished operation.", "intent": "Attempt to add or inspect linework in the drawing.", "app": "AutoCAD", "details": "The Line prompt showed \u201cSpecify first point\u201d before the command was canceled."}, {"start_s": 5159.208, "end_s": 5171.369, "action": "Entered and canceled an AutoCAD command, clicked around the upper architectural linework, and adjusted the view to show more of the drawing.", "intent": "Review or modify the upper portion of the architectural drawing.", "app": "AutoCAD", "details": null}, {"start_s": 5171.369, "end_s": 5176.333, "action": "Activated the Line command, selected a first point near the upper-left linework, moved toward a second point with midpoint tracking, and left the command active.", "intent": "Draw a connecting line in the upper portion of the drawing.", "app": "AutoCAD", "details": "The prompt advanced to \u201cSpecify next point\u201d and displayed midpoint tracking."}, {"start_s": 5176.333, "end_s": 5187.508, "action": "Started the Trim command, selected and dragged across the upper linework, then adjusted the view and canceled the trim operation.", "intent": "Trim or inspect excess geometry in the upper portion of the drawing.", "app": "AutoCAD", "details": "AutoCAD displayed \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 5187.508, "end_s": 5200.214, "action": "Activated the Line command, clicked around the upper architectural lines, adjusted the view, and left AutoCAD prompting for a first point.", "intent": "Continue drawing or positioning linework in the architectural drawing.", "app": "AutoCAD", "details": "The final state remained at the \u201cSpecify first point\u201d Line prompt."}, {"start_s": 5200.214, "end_s": 5204.588, "action": "Switched to AutoCAD, entered short command input, clicked and dragged within the drawing, then pressed Esc repeatedly to cancel active prompts.", "intent": "Cancel or reset an active AutoCAD operation while positioning the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible with repeated Cancel messages in the command line."}, {"start_s": 5204.588, "end_s": 5209.018, "action": "Clicked in the drawing and pressed Esc repeatedly, leaving AutoCAD at an Extend prompt before beginning another command.", "intent": "Clear the current AutoCAD command state.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed the Extend selection prompt and subsequent cancellation."}, {"start_s": 5209.018, "end_s": 5219.02, "action": "Entered the LINE command and left it waiting for the first point while moving the cursor around the drawing.", "intent": "Begin drawing a line and position its starting point.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input displayed \u201cSpecify first point\u201d throughout the span."}, {"start_s": 5219.02, "end_s": 5234.653, "action": "Continued positioning the cursor, clicked in the drawing, and pressed Esc repeatedly while the LINE command progressed from first-point to next-point input.", "intent": "Attempt or cancel line placement in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "AutoCAD displayed LINE prompts and dynamic coordinate input; no completed line is clearly confirmed."}, {"start_s": 5234.653, "end_s": 5241.705, "action": "Entered OFFSET, supplied offset-distance values, clicked drawing geometry, and pressed Esc repeatedly, leaving the command active for another object selection.", "intent": "Create or test offsets on the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed Erase settings and \u201cSelect object to offset.\u201d"}, {"start_s": 5241.705, "end_s": 5247.173, "action": "Entered another offset distance, clicked drawing geometry, and left OFFSET waiting for an object to offset after cancelling intermediate input.", "intent": "Continue the offset operation on selected geometry.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed offset distances of 4'-0\" and the final object-selection prompt."}, {"start_s": 5247.173, "end_s": 5257.251, "action": "Activated AutoCAD, entered editing commands, and used clicks and drags while the TRIM command prompted for objects. Cancelled and re-entered commands as needed, leaving the drawing in a trim-selection state.", "intent": "Trim or extend selected linework in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "TRIM prompt visibly requested an object to trim or shift-select to extend."}, {"start_s": 5257.251, "end_s": 5274.222, "action": "Scrolled and middle-clicked around the drawing while continuing the TRIM operation, then cancelled the active prompts. Selected a slanted segment, which became highlighted with grips, and began another command.", "intent": "Inspect and modify linework using trim and selection operations.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view shifted during navigation; a slanted line was visibly selected before the prompts were cancelled."}, {"start_s": 5274.222, "end_s": 5279.345, "action": "Cancelled active commands, entered ERASE, and removed one object. Then started the LINE command and positioned the crosshair at the drawing while AutoCAD prompted for the first point.", "intent": "Delete an unwanted drawing element and begin adding a line.", "app": "Autodesk AutoCAD 2021", "details": "The command area showed \u201cERASE 1 found,\u201d followed by the LINE first-point prompt."}, {"start_s": 5279.345, "end_s": 5286.09, "action": "Entered OFFSET and supplied an offset distance of 6'-0\", then selected a slanted line and moved to specify the offset side. Cancelled the operation before completion.", "intent": "Create an offset copy of a slanted line at a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "OFFSET visibly displayed the 6'-0\" distance and the prompt to specify the side."}, {"start_s": 5286.09, "end_s": 5291.951, "action": "Re-entered OFFSET, supplied a 10'-0\" distance, and selected a line for offsetting. Cancelled the command while AutoCAD returned to the offset-selection prompt.", "intent": "Try a second offset operation using a larger distance.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt showed the entered distance as 10'-0\" before the operation was cancelled."}, {"start_s": 5291.951, "end_s": 5307.076, "action": "Entered TRIM and clicked linework around the slanted segments, then cancelled repeatedly to end the operation. Left the drawing with the TRIM command prompt cleared.", "intent": "Trim intersecting linework in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "TRIM prompts were visible during the edits; the final command area showed cancellations."}, {"start_s": 5307.076, "end_s": 5316.058, "action": "Activated AutoCAD\u2019s TRIM command, selected fence points and objects around the architectural linework, and panned across the drawing while the trim prompt remained active.", "intent": "Trim or inspect intersecting drawing geometry.", "app": "AutoCAD 2021", "details": "TRIM prompts included selecting objects to trim and specifying fence points."}, {"start_s": 5316.058, "end_s": 5325.841, "action": "Continued navigating the drawing with pans and scrolls, clicked around the linework, and interacted with the active TRIM selection prompt.", "intent": "Continue trimming or reviewing geometry in the drawing.", "app": "AutoCAD 2021", "details": "The command prompt still showed options to trim or shift-select to extend."}, {"start_s": 5325.841, "end_s": 5345.16, "action": "Canceled the active command repeatedly and panned or zoomed through the architectural drawing, ending with the view focused on a closer section of the facade linework.", "intent": "Exit the trim operation and inspect another drawing area.", "app": "AutoCAD 2021", "details": "Command history visibly showed repeated Cancel entries."}, {"start_s": 5345.16, "end_s": 5358.425, "action": "Started OFFSET, entered an offset distance of 1, selected linework, and indicated a side for the offset before canceling the operation.", "intent": "Create an offset line from existing facade geometry.", "app": "AutoCAD 2021", "details": "The OFFSET prompt showed an entered distance of 1 and a request to specify the side."}, {"start_s": 5358.425, "end_s": 5363.922, "action": "Continued selecting geometry for OFFSET, then canceled the active operation with multiple Escape presses and returned to an idle drawing view.", "intent": "Adjust or abandon the offset operation.", "app": "AutoCAD 2021", "details": "No explicit completion of the offset was visible."}, {"start_s": 5363.922, "end_s": 5367.997, "action": "Started the LINE command and positioned the first-point cursor over the drawing, then canceled the command without completing the line.", "intent": "Begin drawing a line segment, then exit the unfinished command.", "app": "AutoCAD 2021", "details": "The prompt changed from Specify first point to Cancel; typed command input was visible near the end."}, {"start_s": 5367.997, "end_s": 5377.805, "action": "Activated AutoCAD, adjusted the window, navigated the drawing with middle-mouse panning/scrolling, and canceled the active TRIM command.", "intent": "Inspect and reposition the drawing while exiting the current edit command.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the command line ended with several Cancel entries."}, {"start_s": 5377.805, "end_s": 5396.201, "action": "Continued panning and zooming around the architectural drawing, then selected a vertical line segment near the lower portion of the view.", "intent": "Navigate to and select geometry for further editing or inspection.", "app": "AutoCAD", "details": "The final screenshot shows the vertical segment highlighted with blue grips."}, {"start_s": 5396.201, "end_s": 5406.173, "action": "Canceled the prior selection/command sequence and started the LINE command, positioning the cursor to define the next point with Ortho enabled.", "intent": "Begin drawing a new line segment from the current drawing area.", "app": "AutoCAD", "details": "The command line shows LINE and prompts for the first or next point; a 20-foot orthogonal preview is visible."}, {"start_s": 5406.173, "end_s": 5416.359, "action": "Kept the LINE command active and repositioned the cursor, previewing orthogonal distances including approximately 13 feet 6 inches and 2 feet 10 inches.", "intent": "Set out the next line point using constrained orthogonal input.", "app": "AutoCAD", "details": "No completed segment is clearly visible; the command remains at a point-selection prompt."}, {"start_s": 5416.359, "end_s": 5429.021, "action": "Canceled the pending line inputs repeatedly and panned/zoomed the drawing to recenter the fa\u00e7ade geometry.", "intent": "Abandon the current line operation and adjust the view for continued drafting.", "app": "AutoCAD", "details": "The command line returns to canceled states and the hand cursor indicates panning."}, {"start_s": 5429.021, "end_s": 5444.997, "action": "Started LINE again and positioned the cursor near the lower-right edge of the fa\u00e7ade, previewing an orthogonal segment of about 8 feet 6 inches.", "intent": "Begin another constrained line placement from the visible fa\u00e7ade edge.", "app": "AutoCAD", "details": "The command line prompts for the first/next point and the line preview remains unconfirmed."}, {"start_s": 5444.997, "end_s": 5451.477, "action": "Activated AutoCAD, continued a LINE command with numeric and angle input, then used middle-button navigation and pressed Escape repeatedly to cancel active prompts.", "intent": "Continue or adjust line construction while navigating the drawing and clearing commands.", "app": "AutoCAD 2021", "details": "Drawing1.dwg remained open; the command area showed LINE prompts."}, {"start_s": 5451.477, "end_s": 5456.056, "action": "Selected a point in the drawing and entered a distance of 15 with a 90-degree constraint while the LINE command remained active.", "intent": "Specify the next orthogonal line point.", "app": "AutoCAD 2021", "details": "Dynamic input visibly showed 15 and 90\u00b0."}, {"start_s": 5456.056, "end_s": 5465.961, "action": "Pressed Escape several times, used middle-button clicks and scrolls to navigate, zoomed out to show more of the building elevation, and canceled the active commands.", "intent": "Inspect the drawing at a broader view and clear unfinished commands.", "app": "AutoCAD 2021", "details": "The view changed from a close-up to a smaller full-building view; command history showed repeated Cancel entries."}, {"start_s": 5465.961, "end_s": 5475.71, "action": "Continued middle-button panning and scrolling around the building elevation, shifting the view to another close-up region.", "intent": "Navigate and inspect different portions of the drawing.", "app": "AutoCAD 2021", "details": "No confirmed geometry edit was visible."}, {"start_s": 5475.71, "end_s": 5494.868, "action": "Used middle-button navigation and scrolling, pressed Escape repeatedly to cancel prompts, and left the drawing displayed in a zoomed-out elevation view.", "intent": "Review the drawing and reset the command state.", "app": "AutoCAD 2021", "details": "The command area showed repeated Cancel messages."}, {"start_s": 5494.868, "end_s": 5509.189, "action": "Navigated and resized the AutoCAD view, selected a point to start another LINE operation with dynamic coordinate input, then pressed Escape repeatedly and returned to an idle command state.", "intent": "Begin a line placement at a chosen point, then cancel it while repositioning the view.", "app": "AutoCAD 2021", "details": "Dynamic input showed a first-point coordinate; the final view was a close-up of the lower building elevation."}, {"start_s": 5509.189, "end_s": 5523.741, "action": "Adjusted the AutoCAD window repeatedly, started the LINE command, moved the crosshair with perpendicular tracking, and pressed Escape several times to cancel the active input.", "intent": "Attempt to position and draw a line in the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command was left canceled at the end of the span."}, {"start_s": 5523.741, "end_s": 5540.045, "action": "Continued the LINE command, moved the cursor horizontally with Ortho tracking, and entered a distance value while AutoCAD prompted for the next point.", "intent": "Specify the next point and length of a line segment.", "app": "Autodesk AutoCAD 2021", "details": "The line command remained active, with the drawing preview visible."}, {"start_s": 5540.045, "end_s": 5545.388, "action": "Entered additional distance characters into the dynamic input and pressed Escape repeatedly to cancel the line operation.", "intent": "Cancel the incomplete line entry.", "app": "Autodesk AutoCAD 2021", "details": "No completed line segment is clearly confirmed."}, {"start_s": 5545.388, "end_s": 5554.751, "action": "Reactivated the LINE command, moved the crosshair around the drawing, and left AutoCAD prompting for the first point; brief zero-distance scroll inputs occurred.", "intent": "Prepare to place another line in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt visibly read \u201cSpecify first point.\u201d"}, {"start_s": 5554.751, "end_s": 5571.1, "action": "Moved the cursor while previewing a slanted line, clicked near its endpoint, and continued the LINE command with a prompt for the next point; then clicked and pressed Escape repeatedly.", "intent": "Attempt to create a slanted line segment and end the drawing operation.", "app": "Autodesk AutoCAD 2021", "details": "The preview showed a roughly 25-foot segment with a 10-degree indication; completion is not confirmed."}, {"start_s": 5571.1, "end_s": 5579.156, "action": "Typed the trim command shortcut, selected the TRIM tool, clicked and navigated around the drawing, and pressed Escape to cancel the active trim selection.", "intent": "Trim or modify intersecting drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt asked to select an object to trim or shift-select to extend; the operation ended canceled."}, {"start_s": 5579.156, "end_s": 5587.711, "action": "Returned to AutoCAD, canceled active commands with Escape, issued an undo, and clicked in the drawing area before typing the next command.", "intent": "Reset the current command state and prepare the drawing for another edit.", "app": "AutoCAD 2021", "details": "Drawing1.dwg remained open in model space."}, {"start_s": 5587.711, "end_s": 5601.188, "action": "Canceled prior input, entered the ERASE command, selected one object, and then began a LINE command by specifying a first point and moving toward the next point.", "intent": "Remove an existing object and create replacement linework.", "app": "AutoCAD 2021", "details": "The command history showed ERASE with one object found, followed by LINE awaiting the next point."}, {"start_s": 5601.188, "end_s": 5610.233, "action": "Continued the LINE command with clicks and view navigation, then canceled the active operation and entered the next command.", "intent": "Adjust or inspect linework while working in the drawing area.", "app": "AutoCAD 2021", "details": "The visible prompt changed to TRIM, with the drawing view repositioned during the interaction."}, {"start_s": 5610.233, "end_s": 5615.598, "action": "Canceled the previous command, started OFFSET, and entered a one-foot offset distance.", "intent": "Set up an offset operation for existing geometry.", "app": "AutoCAD 2021", "details": "The OFFSET prompt visibly showed a distance of 1'-0\" and awaited object selection."}, {"start_s": 5615.598, "end_s": 5622.389, "action": "Selected linework for OFFSET, created a parallel line, and then canceled the remaining offset prompts after additional clicks.", "intent": "Duplicate the selected line at the specified offset distance.", "app": "AutoCAD 2021", "details": "Two closely spaced parallel sloped lines were visible after the offset operation."}, {"start_s": 5622.389, "end_s": 5635.513, "action": "Navigated the drawing view, started a LINE command, placed or previewed an orthogonal segment, and canceled the command sequence.", "intent": "Add and inspect additional orthogonal linework near the offset geometry.", "app": "AutoCAD 2021", "details": "The final view showed parallel sloped lines and vertical geometry; the command line ended with canceled commands."}, {"start_s": 5635.513, "end_s": 5640.025, "action": "Started the LINE command, adjusted the view/window, selected a point, and canceled the unfinished line operation with Escape.", "intent": "Attempt to draw a line segment in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command history ends with Cancel; no completed line is evident."}, {"start_s": 5640.025, "end_s": 5644.457, "action": "Entered an offset distance of 1, selected geometry near the left side of the drawing, then canceled the OFFSET command.", "intent": "Attempt to create a parallel offset of existing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt remains active briefly before repeated Escape presses cancel it."}, {"start_s": 5644.457, "end_s": 5655.232, "action": "Started TRIM, clicked several drawing elements, and canceled the repeated trim-selection operation with Escape.", "intent": "Trim portions of the building-line geometry.", "app": "Autodesk AutoCAD 2021", "details": "The drawing geometry changes during the trim attempt, but the command is ultimately canceled."}, {"start_s": 5655.232, "end_s": 5662.3, "action": "Continued TRIM by clicking geometry in the right portion of the drawing, then canceled the command after additional view movement and clicks.", "intent": "Remove unwanted portions of intersecting linework.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remains visible until repeated Escape presses end the operation."}, {"start_s": 5662.3, "end_s": 5670.248, "action": "Entered an offset distance of 5, selected geometry, and left OFFSET awaiting another object selection before canceling.", "intent": "Create a larger parallel offset in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view is repositioned and the final state shows the OFFSET object-selection prompt."}, {"start_s": 5670.248, "end_s": 5680.269, "action": "Started TRIM and clicked multiple line segments while panning or zooming across the drawing, then canceled the active trim operation.", "intent": "Trim additional sections of the building geometry.", "app": "Autodesk AutoCAD 2021", "details": "The final visible state is the TRIM object-selection prompt after repeated Escape presses."}, {"start_s": 5680.269, "end_s": 5693.572, "action": "Pressed Escape repeatedly to cancel active AutoCAD commands, then clicked in the drawing area and began entering a command.", "intent": "Cancel the current operation and prepare a new AutoCAD command.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained visible with the command line showing repeated cancellations."}, {"start_s": 5693.572, "end_s": 5697.739, "action": "Activated AutoCAD\u2019s dynamic input and entered an offset distance of 10 while the OFFSET command prompted for a distance.", "intent": "Set the offset distance for a drawing modification.", "app": "Autodesk AutoCAD 2021", "details": "The dynamic prompt displayed OFFSET and a distance entry field."}, {"start_s": 5697.739, "end_s": 5716.191, "action": "Selected drawing locations while OFFSET prompted for an object, canceled the operation, and then began another command after additional clicks and Escape presses.", "intent": "Attempt an offset operation and return to command entry after canceling it.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET selecting an object, followed later by cancellation; visible linework remained in the drawing."}, {"start_s": 5716.191, "end_s": 5726.206, "action": "Canceled the previous command, entered LINE, and positioned the cursor to specify the first point.", "intent": "Start drawing a new line segment.", "app": "Autodesk AutoCAD 2021", "details": "The LINE prompt visibly requested the first point, with coordinate fields shown near the cursor."}, {"start_s": 5726.206, "end_s": 5740.803, "action": "Specified points for a line segment across the drawing, then canceled the LINE command after creating the slanted line.", "intent": "Add a slanted line to the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "A new diagonal line appeared between the vertical features; the command line later showed cancellation."}, {"start_s": 5740.803, "end_s": 5747.079, "action": "Entered TRIM, selected drawing areas while the command prompted to trim an object, and canceled the operation.", "intent": "Trim existing linework in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt was visible and the final command line showed repeated cancellations."}, {"start_s": 5747.079, "end_s": 5754.292, "action": "Activated AutoCAD and attempted a LINE command by clicking in the drawing, then canceled the unfinished command with repeated Esc presses.", "intent": "Cancel an in-progress line operation.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 5754.292, "end_s": 5768.776, "action": "Started OFFSET, entered an offset distance of 1, selected drawing geometry, and then canceled the operation after several clicks and view adjustments.", "intent": "Create an offset line from existing geometry, but abandon the operation.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed OFFSET with distance 1 before cancellation."}, {"start_s": 5768.776, "end_s": 5778.164, "action": "Started a LINE command, clicked to define a first point, and moved toward a next point along the sloped geometry before leaving the command active.", "intent": "Draw a line segment aligned with the existing sloped geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed Specify next point and dynamic input displayed an angle of 5 degrees."}, {"start_s": 5778.164, "end_s": 5783.237, "action": "Started TRIM, selected or targeted geometry near the sloped lines, and canceled the command after attempting trim selections.", "intent": "Trim intersecting or extending portions of the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed Select object to trim or shift-select to extend."}, {"start_s": 5783.237, "end_s": 5789.615, "action": "Navigated the drawing view, entered an erase-related command, and canceled after selecting or probing geometry.", "intent": "Remove selected drawing elements, but abandon the erase operation.", "app": "Autodesk AutoCAD 2021", "details": "The command history displayed ERASE 1 found before cancellation."}, {"start_s": 5789.615, "end_s": 5796.944, "action": "Continued navigating and selecting geometry, then started OFFSET with distance 1 and positioned the cursor to choose the side for the offset.", "intent": "Offset an existing line by a distance of 1.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt showed Specify point on side to offset or."}, {"start_s": 5796.944, "end_s": 5803.315, "action": "Canceled active AutoCAD commands, entered dimension-related text, and clicked through the dynamic command suggestions.", "intent": "Attempt to start a dimension or related drafting command.", "app": "AutoCAD", "details": "The command suggestion list showed D (DIMSTYLE), DIMLINEAR, DT (TEXT), and DIM."}, {"start_s": 5803.315, "end_s": 5807.964, "action": "Entered an offset distance of 1'6\", then clicked the sloped line to select an object for offset; canceled the command afterward.", "intent": "Create an offset from the selected sloped drawing line.", "app": "AutoCAD", "details": "The OFFSET prompt first requested a distance and then requested an object to offset."}, {"start_s": 5807.964, "end_s": 5814.008, "action": "Selected and manipulated the sloped line, then canceled several active commands and returned to the drawing.", "intent": "Adjust or edit the sloped line geometry.", "app": "AutoCAD", "details": "The drawing visibly showed the sloped line selected during part of the interval."}, {"start_s": 5814.008, "end_s": 5820.572, "action": "Canceled the active command, used middle-click navigation around the drawing, and selected the lower sloped polyline.", "intent": "Inspect and select geometry in the drawing.", "app": "AutoCAD", "details": "The lower sloped object displayed blue grips when selected."}, {"start_s": 5820.572, "end_s": 5828.182, "action": "Selected several portions of the sloped geometry, entered the erase command, and continued selecting objects; the command remained active at the end.", "intent": "Erase unwanted sloped-line geometry.", "app": "AutoCAD", "details": "The command line showed ERASE with one object found, and selected segments displayed blue grips."}, {"start_s": 5828.182, "end_s": 5832.464, "action": "Canceled active commands, briefly opened Autodesk AutoCAD Help, closed it, returned to the drawing, and entered JOIN; AutoCAD reported that three objects were converted to one polyline.", "intent": "Join separate line segments into a single polyline.", "app": "AutoCAD", "details": "The Help window briefly appeared over the drawing before returning to AutoCAD."}, {"start_s": 5832.464, "end_s": 5846.435, "action": "Entered the OFFSET command, supplied an offset distance, clicked around the visible linework, and repeatedly canceled the command.", "intent": "Create or adjust a parallel copy of drawing geometry.", "app": "AutoCAD", "details": "The OFFSET prompt was visible; the command ended canceled."}, {"start_s": 5846.435, "end_s": 5853.94, "action": "Entered the DIMLINEAR command, clicked near the right-side geometry, and canceled after the first extension-line prompt.", "intent": "Attempt to place a linear dimension on the drawing.", "app": "AutoCAD", "details": "DIMLINEAR was active briefly, then multiple cancellations returned the command line to idle."}, {"start_s": 5853.94, "end_s": 5860.261, "action": "Started OFFSET, entered a distance of 7, clicked the right-side linework, and canceled the operation.", "intent": "Offset selected drawing geometry by a specified distance.", "app": "AutoCAD", "details": "The OFFSET prompt progressed from distance entry to object selection before cancellation."}, {"start_s": 5860.261, "end_s": 5864.282, "action": "Started EXTEND and clicked near the right-side lines, then canceled repeatedly without completing the edit.", "intent": "Extend drawing lines to nearby boundaries.", "app": "AutoCAD", "details": "The EXTEND prompt was visible and the drawing remained largely unchanged."}, {"start_s": 5864.282, "end_s": 5869.189, "action": "Entered a command and then pressed Escape repeatedly to clear active AutoCAD operations.", "intent": "Exit or reset unfinished drawing commands.", "app": "AutoCAD", "details": "The command line showed repeated cancellations; no completed geometry edit was evident."}, {"start_s": 5869.189, "end_s": 5879.272, "action": "Started EXTEND, selected a right-side vertical line, then switched to TRIM and clicked additional linework while the trim prompt remained active.", "intent": "Modify intersections by extending and trimming the right-side drawing geometry.", "app": "AutoCAD", "details": "A vertical line was highlighted during EXTEND; the final view showed TRIM awaiting another object selection."}, {"start_s": 5879.272, "end_s": 5892.364, "action": "Adjusted the AutoCAD view with window movements and middle-click navigation, then clicked within the drawing while the TRIM command remained active.", "intent": "Navigate the drawing and continue trimming geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt asked to select an object to trim or shift-select to extend."}, {"start_s": 5892.364, "end_s": 5906.743, "action": "Resized and repositioned the AutoCAD window, navigated the drawing, clicked several line locations, and pressed Escape repeatedly to cancel active prompts before typing a new command character.", "intent": "Continue or cancel TRIM operations while inspecting the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained visible through most of the span."}, {"start_s": 5906.743, "end_s": 5922.297, "action": "Activated AutoCAD, typed a command, clicked and dragged across the drawing, then pressed Escape repeatedly to cancel the active operation.", "intent": "Modify or inspect linework in the drawing and return to an idle command state.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted during the drag; the TRIM prompt was visible initially and the command line later showed cancellations."}, {"start_s": 5922.297, "end_s": 5933.09, "action": "Activated AutoCAD and initiated the LINE command, specified a first point, then clicked and dragged to define the next point while the view shifted.", "intent": "Draw a new line segment in the AutoCAD model.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed LINE and prompts for the first and next points."}, {"start_s": 5933.09, "end_s": 5941.682, "action": "Entered a numeric value while working in AutoCAD, clicked in the drawing, and pressed Escape repeatedly to cancel the active operation.", "intent": "Attempt an offset-related edit and then cancel it.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET command was active and requested an object to offset; no completed offset is visible."}, {"start_s": 5941.682, "end_s": 5945.904, "action": "Activated the OFFSET command, entered an offset distance of 1, clicked and dragged in the drawing, then pressed Escape to return to object selection.", "intent": "Create an offset from selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt first requested the offset distance and then requested an object to offset; completion is not shown."}, {"start_s": 5945.904, "end_s": 5965.495, "action": "Activated AutoCAD, navigated the drawing with clicks, middle-button panning/zooming, and scrolls, then canceled active commands while changing the view to another portion of the model.", "intent": "Navigate and inspect the AutoCAD drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the command line showed repeated Cancel prompts."}, {"start_s": 5965.495, "end_s": 5975.298, "action": "Started the LINE command, selected a first point, and moved the cursor to preview a constrained next segment before canceling the operation.", "intent": "Create a line segment in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed LINE with a first-point prompt and a 90-degree preview."}, {"start_s": 5975.298, "end_s": 5984.979, "action": "Entered the DIMLINEAR command, selected extension points, and positioned a dimension preview, then canceled and began a selection operation in the drawing.", "intent": "Add or inspect a linear dimension on the model.", "app": "AutoCAD", "details": "The command line displayed DIMLINEAR and a dimension-line-location prompt before cancellation."}, {"start_s": 5984.979, "end_s": 5991.075, "action": "Canceled the prior operation, started LINE, selected a first point, and moved the cursor to preview a horizontal orthogonal segment.", "intent": "Create another line segment in the drawing.", "app": "AutoCAD", "details": "Dynamic input displayed an orthogonal 90-degree line preview."}, {"start_s": 5991.075, "end_s": 5996.617, "action": "Entered and edited a numeric distance in the active LINE command using typed characters and backspace while the segment preview remained active.", "intent": "Specify the line segment length numerically.", "app": "AutoCAD", "details": "The dynamic input field visibly contained a partial numeric value."}, {"start_s": 5996.617, "end_s": 6001.716, "action": "Completed the active input, canceled the line operation with Escape, and used middle-button navigation before leaving the drawing at an idle command prompt.", "intent": "Abandon the unfinished line and return to an idle drawing view.", "app": "AutoCAD", "details": "The command line ended with repeated Cancel messages and no visible new line."}, {"start_s": 6001.716, "end_s": 6006.021, "action": "Typed command fragments to invoke AutoCAD dimension-related commands, canceled the active DIMLINEAR prompt repeatedly, and left the dynamic command suggestion list open.", "intent": "Attempted to start a dimensioning operation.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained visible; no dimension was completed."}, {"start_s": 6006.021, "end_s": 6014.948, "action": "Selected points in the drawing while DIMLINEAR prompted for the first extension-line origin, then canceled the command through repeated Escape presses and additional clicks.", "intent": "Attempted to place a linear dimension on the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command history shows DIMLINEAR and subsequent cancellations; no completed dimension is visible."}, {"start_s": 6014.948, "end_s": 6024.813, "action": "Invoked dimension-related commands, clicked and dragged around the drawing, used middle-button navigation and scrolling, and canceled the active prompts; ended with a vertical line selected by blue grips.", "intent": "Inspected or adjusted geometry while attempting a drawing edit.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted and a vertical segment was selected; command prompts were canceled."}, {"start_s": 6024.813, "end_s": 6029.273, "action": "Canceled the prior operation, invoked LINE, and began specifying the first point in the drawing after navigating the view.", "intent": "Started creating a new line segment.", "app": "Autodesk AutoCAD 2021", "details": "The LINE prompt was active at the end of the span and no segment was completed."}, {"start_s": 6029.273, "end_s": 6033.315, "action": "Entered a distance-like value for the active LINE command and positioned the cursor for the next point, producing a vertical preview constrained at 90 degrees.", "intent": "Continue drawing a line segment with typed dimensions.", "app": "Autodesk AutoCAD 2021", "details": "LINE remained active and the command prompt requested the next point."}, {"start_s": 6033.315, "end_s": 6041.268, "action": "Canceled the unfinished line, invoked LINE again, clicked in the drawing, and created a rectangular-looking connected segment before canceling the remaining prompt.", "intent": "Add or test line geometry in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The final view shows the added horizontal and vertical geometry with the command canceled."}, {"start_s": 6041.268, "end_s": 6046.077, "action": "Canceled the active LINE command and cleared the command state with repeated Escape presses.", "intent": "Cancel an unfinished drawing operation.", "app": "AutoCAD", "details": "The drawing remained visually unchanged."}, {"start_s": 6046.077, "end_s": 6054.383, "action": "Started TRIM, selected drawing geometry, and navigated the view with middle-button actions; canceled the operation with Escape.", "intent": "Trim or adjust overlapping linework in the drawing.", "app": "AutoCAD", "details": "The view ended zoomed out, showing more of the architectural linework."}, {"start_s": 6054.383, "end_s": 6059.682, "action": "Initiated LINE and positioned the crosshair to specify a first point, then canceled the command with Escape.", "intent": "Begin adding a line segment.", "app": "AutoCAD", "details": "No completed new line is visible."}, {"start_s": 6059.682, "end_s": 6068.196, "action": "Entered an offset distance of 1'6\", selected geometry for OFFSET, and canceled the operation with repeated Escape presses.", "intent": "Create an offset copy of existing linework.", "app": "AutoCAD", "details": "The command prompt ended in an offset-selection state before cancellation."}, {"start_s": 6068.196, "end_s": 6080.488, "action": "Moved and adjusted the drawing view, then initiated LINE and positioned the cursor to specify a first point before canceling.", "intent": "Navigate the drawing and prepare another line segment.", "app": "AutoCAD", "details": "The view ended zoomed in on the sloped architectural lines."}, {"start_s": 6080.488, "end_s": 6087.033, "action": "Initiated LINE, clicked in the drawing to set or target a first point, and canceled the active command with repeated Escape presses.", "intent": "Attempt to add linework near the upper sloped edge.", "app": "AutoCAD", "details": "No completed line segment is visible at the end."}, {"start_s": 6087.033, "end_s": 6094.753, "action": "Entered offset distances and clicked in the drawing while the OFFSET command remained active, then pressed Escape repeatedly to cancel it.", "intent": "Create or adjust parallel geometry with OFFSET.", "app": "AutoCAD", "details": "The command prompt progressed from specifying an offset distance to selecting an object to offset."}, {"start_s": 6094.753, "end_s": 6101.412, "action": "Entered another offset distance, clicked the drawing, and used middle-clicks while OFFSET remained active; began entering another command at the end.", "intent": "Continue creating parallel geometry with OFFSET.", "app": "AutoCAD", "details": "The drawing remained in the OFFSET workflow and no clearly completed new object was visible."}, {"start_s": 6101.412, "end_s": 6107.919, "action": "Selected points on the drawing repeatedly to offset geometry, producing several closely spaced horizontal lines, then pressed Escape to cancel the remaining command.", "intent": "Add repeated parallel lines to the drawing.", "app": "AutoCAD", "details": "The resulting view showed a stack of horizontal lines on the left portion of the structure."}, {"start_s": 6107.919, "end_s": 6114.977, "action": "Pressed Escape repeatedly to clear active commands, entered offset-related input, and clicked or dragged near the drawing without a visible completed modification.", "intent": "Cancel or revise the current drawing operation.", "app": "AutoCAD", "details": "The drawing stayed visually unchanged while command prompts were canceled."}, {"start_s": 6114.977, "end_s": 6125.351, "action": "Canceled several commands, started the LINE command, and placed a line segment along the sloped right side of the structure while adjusting the view.", "intent": "Draw a sloped line segment in the model.", "app": "AutoCAD", "details": "The LINE prompt showed a first point and next-point tracking with a visible distance and angle."}, {"start_s": 6125.351, "end_s": 6129.452, "action": "Started EXTEND, clicked near the right-side geometry, then canceled the command and adjusted the view with middle-click navigation.", "intent": "Extend existing geometry to a boundary.", "app": "AutoCAD", "details": "The prompt explicitly displayed Select object to extend; no completed extension was evident."}, {"start_s": 6129.452, "end_s": 6137.526, "action": "Switched to AutoCAD, adjusted the drawing view with middle-mouse navigation, and canceled an active LINE command after selecting a point.", "intent": "Navigate the drawing and cancel an unfinished line operation.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 6137.526, "end_s": 6150.111, "action": "Entered an offset distance of 2'-6\", selected drawing geometry, and created several parallel offset lines; canceled the offset command afterward.", "intent": "Add parallel construction lines to the drawing using OFFSET.", "app": "AutoCAD", "details": "The resulting view shows multiple sloped parallel lines across the lower portion of the drawing."}, {"start_s": 6150.111, "end_s": 6160.031, "action": "Started TRIM, navigated and zoomed around the drawing, and clicked candidate geometry while leaving the trim command active.", "intent": "Trim selected drawing segments.", "app": "AutoCAD", "details": "AutoCAD displayed the prompt to select an object to trim or shift-select to extend."}, {"start_s": 6160.031, "end_s": 6169.963, "action": "Continued navigating and zooming the drawing, clicked geometry under TRIM, and left the trim selection prompt active.", "intent": "Continue trimming or inspecting drawing geometry.", "app": "AutoCAD", "details": "A WhatsApp notification appeared over the lower-right corner during the AutoCAD work."}, {"start_s": 6169.963, "end_s": 6180.784, "action": "Zoomed and panned across the drawing while repeatedly selecting geometry for TRIM, then canceled the active command.", "intent": "Trim unwanted portions of the drawing lines.", "app": "AutoCAD", "details": "The trim prompt remained visible and the view shifted to a close-up of intersecting lines."}, {"start_s": 6180.784, "end_s": 6187.043, "action": "Started EXTEND, zoomed to the drawing, and selected several line segments to extend toward nearby boundaries.", "intent": "Extend drawing lines to meet boundary geometry.", "app": "AutoCAD", "details": "The EXTEND command remained active with the prompt to select an object to extend or shift-select to trim."}, {"start_s": 6187.043, "end_s": 6197.427, "action": "Switched to AutoCAD, canceled active commands, and navigated the drawing with middle-button clicks and scrolling. Clicked near the drawing and began entering a command.", "intent": "Navigate the drawing and prepare a new AutoCAD command.", "app": "AutoCAD 2021", "details": "The drawing view changed position and scale; the command history showed canceled operations and an erase result."}, {"start_s": 6197.427, "end_s": 6202.204, "action": "Canceled the current operation, adjusted the view, then entered the OFFSET command and began specifying an offset distance of 2.", "intent": "Offset a drawing element by a specified distance.", "app": "AutoCAD 2021", "details": "The command line and dynamic input displayed OFFSET with distance 2 and prompted for the object or side."}, {"start_s": 6202.204, "end_s": 6207.574, "action": "Selected a drawing location for the offset operation, then canceled repeatedly and left the command interface active.", "intent": "Attempt an offset and clear the unfinished command state.", "app": "AutoCAD 2021", "details": "The view remained zoomed into the railing-like geometry; OFFSET prompted for the side to offset before cancellation."}, {"start_s": 6207.574, "end_s": 6219.814, "action": "Adjusted the zoom and view, started the LINE command, clicked a first point, and moved toward a second point before canceling the operation.", "intent": "Draw a line segment in the AutoCAD geometry.", "app": "AutoCAD 2021", "details": "Dynamic input showed LINE prompting for the next point, with orthogonal tracking visible, followed by cancellation."}, {"start_s": 6219.814, "end_s": 6227.928, "action": "Started LINE, selected a first point, moved to define the next point with dynamic dimensions and angle tracking, then continued navigating and canceling unfinished inputs.", "intent": "Create or position another line segment in the drawing.", "app": "AutoCAD 2021", "details": "The line command remained active in the evidence, prompting for the next point while the view was adjusted."}, {"start_s": 6227.928, "end_s": 6245.801, "action": "Navigated the drawing with middle-button clicks and scrolling, then clicked and selected a slanted line segment near the lower railing geometry.", "intent": "Inspect and select geometry in the drawing.", "app": "AutoCAD 2021", "details": "The final view showed the slanted segment highlighted with blue grips, and the command line prompted for an opposite corner or selection method."}, {"start_s": 6245.801, "end_s": 6250.633, "action": "Switched to AutoCAD, canceled active commands repeatedly, and entered an unrecognized command, leaving the drawing unchanged.", "intent": "Reset the command state and return to an idle drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed repeated Cancel entries and Unknown command \"L\"."}, {"start_s": 6250.633, "end_s": 6260.598, "action": "Started the LINE command, selected a first point near the left side of the drawing, and moved the cursor toward a second point while dynamic dimensions appeared; canceled the operation.", "intent": "Attempt to draw a line across the architectural geometry.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed a first point and a pending next point before cancellation."}, {"start_s": 6260.598, "end_s": 6273.051, "action": "Canceled the active drawing operation and navigated the model with middle-clicks and scrolling, changing the visible zoom and pan region.", "intent": "Inspect different portions of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted from a close-up railing area to a broader portion of the architectural model."}, {"start_s": 6273.051, "end_s": 6282.432, "action": "Canceled commands, restarted LINE, selected a point on the upper railing geometry, and moved toward another point with dynamic distance and angle values displayed; canceled again while continuing to navigate.", "intent": "Attempt to add or inspect a line along the upper railing geometry.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed approximately 10'-8\" and 3\u00b0 during the pending line segment."}, {"start_s": 6282.432, "end_s": 6297.943, "action": "Entered and used OFFSET with a 2'-6\" distance, selected or previewed offset geometry, then canceled the operation and continued panning and zooming around the drawing.", "intent": "Attempt to create a parallel offset element from existing architectural lines.", "app": "Autodesk AutoCAD 2021", "details": "The command line progressed from specifying offset distance to selecting an object, then returned to canceled commands."}, {"start_s": 6297.943, "end_s": 6304.612, "action": "Started LINE again, selected a first point on the lower railing area, and moved to a second point with dynamic distance and angle feedback while leaving the command active.", "intent": "Begin another line segment along the lower railing geometry.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed approximately 20'-7\" and 7\u00b0 with the prompt to specify the next point."}, {"start_s": 6304.612, "end_s": 6312.285, "action": "Activated AutoCAD and adjusted the window while continuing a LINE command; clicked in the drawing and positioned a tentative next point with dynamic input showing distance and angle.", "intent": "Continue drawing a line in the architectural drawing.", "app": "AutoCAD", "details": "LINE remains active at the end of the span."}, {"start_s": 6312.285, "end_s": 6317.675, "action": "Canceled the active LINE operation with Escape, clicked in the drawing, then canceled additional command prompts and navigated the view with a short scroll.", "intent": "Abort the unfinished line and return AutoCAD to an idle state.", "app": "AutoCAD", "details": "The command area shows repeated Cancel messages."}, {"start_s": 6317.675, "end_s": 6323.162, "action": "Started a new LINE command, clicked a first point near the right side of the drawing, and positioned a tentative second point with dynamic distance and angle input.", "intent": "Draw another line segment in the architectural drawing.", "app": "AutoCAD", "details": "LINE is awaiting the next point at the end of the span."}, {"start_s": 6323.162, "end_s": 6334.556, "action": "Canceled the active line and several subsequent prompts, navigated the drawing with middle-clicks and scrolling, then started another LINE command and positioned a long tentative segment across the drawing before canceling it.", "intent": "Experiment with line placement and view positioning while editing the drawing.", "app": "AutoCAD", "details": "The final screenshot shows the drawing idle after repeated cancellations."}, {"start_s": 6334.556, "end_s": 6343.385, "action": "Entered the OFFSET command with a distance of 2, selected and offset multiple sloped lines through repeated clicks and a drag, then canceled the remaining offset prompts.", "intent": "Create parallel offsets of existing sloped edges in the architectural drawing.", "app": "AutoCAD", "details": "Several additional parallel lines are visible in the upper structure."}, {"start_s": 6343.385, "end_s": 6349.588, "action": "Entered TRIM, selected crossing edges and dragged a fence across the drawing while panning or zooming, then continued selecting trim targets and canceled the command.", "intent": "Trim intersecting or excess line segments in the drawing.", "app": "AutoCAD", "details": "TRIM remains active at the end, awaiting another object or fence selection."}, {"start_s": 6349.588, "end_s": 6361.563, "action": "Activated AutoCAD, navigated around the drawing with clicks, middle-button panning, and scrolling, then canceled active commands. Selected several slanted line segments in the lower drawing area and left a selection active.", "intent": "Inspect and select geometry in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open; command history shows repeated cancellations and a selection-window prompt."}, {"start_s": 6361.563, "end_s": 6366.815, "action": "Canceled the active selection and navigation operations, then started the OFFSET command and entered an offset distance of 2.", "intent": "Prepare to offset drawing geometry by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line visibly shows OFFSET with distance input 2."}, {"start_s": 6366.815, "end_s": 6371.195, "action": "Canceled the offset-related prompts, started the LINE command, and positioned the cursor to begin a new line segment near the lower-right corner of the drawing.", "intent": "Begin drawing a line in the lower-right area.", "app": "Autodesk AutoCAD 2021", "details": "The command line prompts for the first point and then the next point; no completed segment is clearly visible."}, {"start_s": 6371.195, "end_s": 6376.265, "action": "Entered coordinate-like input for the active LINE command, canceled several prompts, and clicked near the lower-right corner; a short vertical geometry element became selected.", "intent": "Attempt to place or modify line geometry near the drawing boundary.", "app": "Autodesk AutoCAD 2021", "details": "The final screenshot shows blue grips on a short vertical element at the right edge."}, {"start_s": 6376.265, "end_s": 6383.551, "action": "Canceled the prior command, restarted LINE, and clicked near the same lower-right corner to define another point; continued entering point input while the next-point prompt remained active.", "intent": "Continue constructing line geometry at the lower-right corner.", "app": "Autodesk AutoCAD 2021", "details": "LINE remains active with a visible next-point prompt and tracking marker."}, {"start_s": 6383.551, "end_s": 6388.98, "action": "Entered additional coordinate-like input for the active LINE command, canceled some prompts, and left the command awaiting the next point with orthogonal tracking visible.", "intent": "Set the next point for the line using constrained input.", "app": "Autodesk AutoCAD 2021", "details": "The final view shows a dynamic distance field and an Ortho tooltip near the lower-right corner."}, {"start_s": 6388.98, "end_s": 6395.704, "action": "Repositioned and resized the AutoCAD window, started a LINE operation, specified points in the drawing, then pressed Escape repeatedly to cancel the active command.", "intent": "Draw or adjust a line segment in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line ended with multiple Cancel messages."}, {"start_s": 6395.704, "end_s": 6399.762, "action": "Entered a 2-foot offset distance in the OFFSET command and left AutoCAD prompting for the object to offset.", "intent": "Create a parallel copy at a specified offset distance.", "app": "Autodesk AutoCAD 2021", "details": "The visible dynamic input showed 2'-0\"."}, {"start_s": 6399.762, "end_s": 6407.913, "action": "Selected and manipulated drawing geometry while OFFSET remained active, then pressed Escape and navigated the view; the drawing displayed additional horizontal lines in the lower structure.", "intent": "Offset or refine repeated horizontal elements in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt returned to selecting an object to offset before cancellation."}, {"start_s": 6407.913, "end_s": 6417.382, "action": "Entered the EXTEND command, dragged across the lower drawing, clicked several geometry locations, and navigated the view with middle-button actions; the command was ultimately canceled.", "intent": "Extend selected drawing lines to nearby boundaries.", "app": "Autodesk AutoCAD 2021", "details": "The prompt showed Select object to extend or shift-select to trim."}, {"start_s": 6417.382, "end_s": 6434.188, "action": "Paused while viewing the AutoCAD drawing, then scrolled and middle-clicked to pan or adjust the view around the lower structural geometry.", "intent": "Inspect and reposition the drawing view.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 6434.188, "end_s": 6445.379, "action": "Navigated and edited the lower geometry with clicks, drags, and view adjustments, canceled active prompts, and left several lower horizontal elements selected with blue grips visible.", "intent": "Refine or select the lower repeated elements in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed canceled corner-selection prompts and an automatic save notification."}, {"start_s": 6445.379, "end_s": 6449.892, "action": "Switched to AutoCAD, canceled active commands, and clicked the lower-left drawing geometry, leaving several line segments selected.", "intent": "Inspect or select geometry in the lower-left portion of the drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible; command history showed repeated Cancel entries."}, {"start_s": 6449.892, "end_s": 6456.083, "action": "Canceled commands and clicked around the lower-left geometry, clearing the visible selection and returning to an idle drawing view.", "intent": "Reset the command state and adjust the current geometry selection.", "app": "AutoCAD", "details": "No clear geometry modification was visible."}, {"start_s": 6456.083, "end_s": 6465.456, "action": "Started OFFSET, entered a distance of 2, selected geometry, and clicked points to create or preview offsets; then continued the offset operation and canceled several times.", "intent": "Create parallel offset lines around the lower building geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 2 and repeated prompts for the side to offset."}, {"start_s": 6465.456, "end_s": 6475.991, "action": "Started TRIM and used a long drag/fence gesture across the drawing while the command prompted for objects to trim, producing a visibly altered lower geometry layout.", "intent": "Trim intersecting or unwanted line segments in the drawing.", "app": "AutoCAD", "details": "TRIM remained active with fence-point prompts near the end of the span."}, {"start_s": 6475.991, "end_s": 6486.156, "action": "Continued the trim/fence interaction, then used middle-button navigation and scrolling to pan or zoom out, and canceled the active command.", "intent": "Review the edited geometry at a wider drawing view.", "app": "AutoCAD", "details": "The view progressively zoomed or panned out and the command line returned to Cancel entries."}, {"start_s": 6486.156, "end_s": 6499.183, "action": "Continued middle-button panning and scrolling to reposition the AutoCAD view, briefly canceled commands, and left the broader building drawing visible.", "intent": "Navigate and inspect the drawing after editing.", "app": "AutoCAD", "details": "Windows Explorer briefly resized in the background; no confirmed geometry edit occurred during this span."}, {"start_s": 6499.183, "end_s": 6506.002, "action": "Activated the LINE command, positioned the cursor near the lower-right geometry, and entered point input while repeatedly resizing the dynamic-input window; then pressed Escape to cancel the active command.", "intent": "Attempt to draw a line in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained visible with the LINE prompt and existing wireframe geometry."}, {"start_s": 6506.002, "end_s": 6510.042, "action": "Canceled the prior command, started OFFSET, and entered a 2'-0\" offset distance while the drawing remained unchanged.", "intent": "Prepare to offset existing drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt visibly requested an offset distance; no completed offset is evident."}, {"start_s": 6510.042, "end_s": 6514.387, "action": "Selected points or geometry around the lower portion of the drawing while attempting the offset, then pressed Escape repeatedly to cancel the operation.", "intent": "Attempt to offset selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line shows canceled operations and the wireframe remains visible."}, {"start_s": 6514.387, "end_s": 6520.285, "action": "Started EXTEND, selected or dragged across lower-left and bottom edges, and pressed Escape repeatedly; left a lower horizontal edge selected before canceling.", "intent": "Attempt to extend boundary edges of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "EXTEND prompts and a blue-highlighted lower edge are visible; no clear completed extension is shown."}, {"start_s": 6520.285, "end_s": 6530.264, "action": "Canceled the active command, used middle-button navigation and scrolling to reposition the view, then resumed EXTEND and selected lower-right geometry before canceling again.", "intent": "Navigate the drawing and attempt additional edge editing.", "app": "Autodesk AutoCAD 2021", "details": "The view shifts and zooms around the lower structure; the EXTEND prompt is visible and no definitive edit completion is shown."}, {"start_s": 6530.264, "end_s": 6542.599, "action": "Pressed Escape to clear commands, then used repeated middle-button navigation and scrolling to zoom and pan across the larger wireframe drawing.", "intent": "Review and reposition the AutoCAD drawing after canceled edits.", "app": "Autodesk AutoCAD 2021", "details": "The view changes from the lower structure to a wider portion of the model; the command line shows canceled commands."}, {"start_s": 6542.599, "end_s": 6560.851, "action": "Activated AutoCAD and adjusted the drawing view while using the LINE command; selected points to create a line segment, then pressed Escape repeatedly to cancel or exit active prompts.", "intent": "Draw and refine a line in the architectural drawing.", "app": "AutoCAD", "details": "LINE prompt remained active and dynamic input showed changing distance and angle values."}, {"start_s": 6560.851, "end_s": 6577.701, "action": "Continued placing points with the LINE command near the stair and wall geometry, dragged and clicked to define another segment, then left the resulting short line selected before cancelling prompts.", "intent": "Continue drawing linework in the architectural detail.", "app": "AutoCAD", "details": "A short horizontal line segment was visible with blue grips at the end of the span."}, {"start_s": 6577.701, "end_s": 6586.86, "action": "Cancelled the active drawing and selection prompts with repeated Escape presses, clicked near the wall and stair geometry, and erased one found object.", "intent": "Remove an unwanted line or drawing element.", "app": "AutoCAD", "details": "The command history visibly reported \u201cERASE 1 found\u201d followed by cancelled commands."}, {"start_s": 6586.86, "end_s": 6592.651, "action": "Entered and used the OFFSET command, adjusted the view around the stair and wall lines, clicked and dragged near the geometry, then cancelled the operation.", "intent": "Attempt to offset existing architectural linework.", "app": "AutoCAD", "details": "OFFSET displayed its settings and prompted to select an object to offset before cancellation."}, {"start_s": 6592.651, "end_s": 6597.326, "action": "Entered the EXTEND command, selected a line near the lower stair detail, adjusted the view, and cancelled the command.", "intent": "Attempt to extend stair-detail linework to a boundary.", "app": "AutoCAD", "details": "EXTEND prompted to select an object to extend or shift-select to trim."}, {"start_s": 6597.326, "end_s": 6603.359, "action": "Entered the TRIM command, selected near the stair and wall lines, adjusted the view, and pressed Escape repeatedly while leaving the trim prompt active.", "intent": "Attempt to trim architectural linework.", "app": "AutoCAD", "details": "TRIM prompted to select an object to trim or shift-select to extend."}, {"start_s": 6603.359, "end_s": 6612.156, "action": "Switched to AutoCAD, canceled active commands, and used middle-button clicks and scrolling to navigate the drawing view.", "intent": "Navigate and inspect the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible in 2D Wireframe with canceled commands shown in the command line."}, {"start_s": 6612.156, "end_s": 6618.034, "action": "Started TRIM and clicked several drawing edges while adjusting the view, then canceled the command.", "intent": "Trim or adjust intersecting drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line repeatedly displayed \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 6618.034, "end_s": 6622.269, "action": "Started OFFSET with distance input, selected and dragged drawing geometry, then canceled the operation.", "intent": "Create an offset of a selected drawing edge.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET and a prompt to select an object to offset."}, {"start_s": 6622.269, "end_s": 6627.244, "action": "Resumed TRIM, clicked several edges in the upper portion of the drawing, and canceled the command.", "intent": "Trim selected portions of the drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained active while the visible linework was edited."}, {"start_s": 6627.244, "end_s": 6632.808, "action": "Started EXTEND and moved the view around the upper sloped edges, then canceled the command.", "intent": "Extend drawing edges to nearby boundaries.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed EXTEND and \u201cSelect object to extend or shift-select to trim.\u201d"}, {"start_s": 6632.808, "end_s": 6647.608, "action": "Started LINE, clicked and navigated around the drawing, then canceled the unfinished line operation and returned to a wider view.", "intent": "Attempt to add line geometry while inspecting the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The LINE command prompted for the first point before repeated cancellations; the final view showed the broader drawing."}, {"start_s": 6647.608, "end_s": 6657.814, "action": "Activated AutoCAD and continued a LINE command, clicking to place a point and positioning the next segment with Ortho enabled.", "intent": "Draw additional linework in the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "The dynamic input showed distance and angle values while the LINE command remained active."}, {"start_s": 6657.814, "end_s": 6670.73, "action": "Continued positioning the active line with several clicks and drags, then pressed Escape repeatedly to cancel the command and return to an idle drawing state.", "intent": "Adjust or abandon the current line placement.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the drawing with the command line reporting multiple cancellations."}, {"start_s": 6670.73, "end_s": 6685.925, "action": "Started TRIM, selected or attempted to trim several parts of the drawing, then navigated the view with middle-button actions and canceled the command.", "intent": "Clean up intersecting or unwanted linework.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt asked to select an object to trim or shift-select to extend."}, {"start_s": 6685.925, "end_s": 6692.521, "action": "Started another LINE operation and positioned a vertical segment using Ortho, with dynamic input showing a distance and 90-degree direction; left the command active after clicking.", "intent": "Add a vertical line segment to the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt displayed Specify first point and then Specify next point."}, {"start_s": 6692.521, "end_s": 6700.84, "action": "Activated TRIM and clicked several line segments around the sloped and vertical geometry, visibly removing or altering portions while panning slightly; then canceled the command.", "intent": "Refine the newly edited geometry by trimming excess lines.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained visible and later showed requests for the next fence point."}, {"start_s": 6700.84, "end_s": 6715.905, "action": "Started LINE again, navigated and zoomed the drawing, then clicked to place a point and positioned the next segment with Ortho and endpoint snapping.", "intent": "Continue adding precise linework to the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed an endpoint snap, 90-degree constraint, and a short distance for the next line."}, {"start_s": 6715.905, "end_s": 6725.964, "action": "Activated AutoCAD, canceled the prior command, started the LINE command, and positioned the cursor with orthographic tracking near the drawing geometry. Clicked and scrolled around the model while leaving the line operation active.", "intent": "Create or position linework in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "LINE prompt remained active and showed an orthographic distance of about 3 feet."}, {"start_s": 6725.964, "end_s": 6735.08, "action": "Kept the LINE command active and navigated around the drawing with scrolling and cursor movement, displaying orthographic tracking and a measured horizontal distance of about 18 feet 2 inches.", "intent": "Continue positioning the next point for the active line.", "app": "Autodesk AutoCAD 2021", "details": "No confirmed point placement is visible; the command prompt continued to request the next point."}, {"start_s": 6735.08, "end_s": 6747.714, "action": "Continued the active LINE operation, dragged and repositioned the cursor across the model, then pressed Escape repeatedly to cancel the command and returned to an idle command state.", "intent": "Attempt line placement, then cancel the unfinished drawing operation.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view remained focused on the stepped linework and adjacent rectangular geometry."}, {"start_s": 6747.714, "end_s": 6752.182, "action": "Started the OFFSET command and entered an offset distance of 1 foot while targeting the right-side rectangular geometry.", "intent": "Offset selected drawing geometry by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "AutoCAD displayed the OFFSET prompt for the offset distance."}, {"start_s": 6752.182, "end_s": 6756.561, "action": "Confirmed the offset-distance input, clicked the drawing to select or offset geometry, then canceled the operation and began entering another offset distance of 4.", "intent": "Perform an offset operation and prepare a subsequent offset.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed an offset distance of 4 near the end of the span."}, {"start_s": 6756.561, "end_s": 6764.946, "action": "Clicked and dragged around the right-side geometry during the OFFSET operation, then pressed Escape repeatedly to cancel and returned to the idle AutoCAD command state.", "intent": "Attempt another offset and cancel the unfinished operation.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the rectangular geometry with an additional nearby vertical line; no confirmed offset result is established."}, {"start_s": 6764.946, "end_s": 6776.826, "action": "Activated the OFFSET command, entered an offset distance, selected a drawing edge, and clicked to specify the offset side. Pressed Escape repeatedly to cancel the active operation.", "intent": "Create an offset line in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed OFFSET with a 1'6\" distance and side-selection prompt."}, {"start_s": 6776.826, "end_s": 6781.169, "action": "Activated EXTEND, clicked near drawing edges to attempt an extension, then pressed Escape repeatedly to cancel. Began entering another command at the end of the span.", "intent": "Adjust line geometry by extending an object to a boundary.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt showed EXTEND and later returned to the drawing."}, {"start_s": 6781.169, "end_s": 6788.306, "action": "Worked in the TRIM command, clicked and dragged around drawing geometry, and used middle-click navigation to reposition the view. Pressed Escape repeatedly, leaving the command canceled.", "intent": "Trim or inspect intersecting drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The view was panned or zoomed to show more of the architectural linework; the command history showed canceled operations."}, {"start_s": 6788.306, "end_s": 6798.261, "action": "Entered OFFSET again with a distance of 1, selected drawing geometry, and clicked to define the offset side. Canceled the operation and navigated to a closer view of the drawing.", "intent": "Create another offset feature in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt was visible, followed by multiple cancel commands and a changed zoomed view."}, {"start_s": 6798.261, "end_s": 6808.706, "action": "Activated TRIM, selected or clicked around several line intersections while panning and zooming through the drawing, then pressed Escape repeatedly to cancel.", "intent": "Trim unwanted portions of architectural linework.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM command prompt remained active during the clicks; the command history ended with canceled operations."}, {"start_s": 6808.706, "end_s": 6823.664, "action": "Remained in AutoCAD with the drawing view visible and no substantive interaction recorded until entering the letter \u201cl\u201d at the end of the span.", "intent": "Wait or prepare to enter the next drawing command.", "app": "Autodesk AutoCAD 2021", "details": "The final screenshot shows the architectural drawing at a changed zoom level with the command line idle."}, {"start_s": 6823.664, "end_s": 6828.403, "action": "Activated AutoCAD, entered the LINE command, clicked points in the drawing, and repeatedly canceled or adjusted the in-progress line operation.", "intent": "Attempt to draw or position a line in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained in the LINE command with dynamic input visible before cancellation."}, {"start_s": 6828.403, "end_s": 6840.629, "action": "Canceled active AutoCAD commands, briefly navigated the drawing with middle-clicks and scrolling, and left the canvas at a slightly shifted view.", "intent": "Clear unfinished commands and inspect or reposition the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The command history shows repeated Cancel entries; no definite geometry change is visible."}, {"start_s": 6840.629, "end_s": 6845.805, "action": "Started the OFFSET command and left the offset-distance prompt active with the default distance of 1'-0\" displayed.", "intent": "Prepare to offset existing drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt requested an offset distance."}, {"start_s": 6845.805, "end_s": 6850.204, "action": "Entered an offset distance of 1'-0\", selected a vertical line, and continued through the prompt for the side on which to offset before canceling and restarting OFFSET.", "intent": "Create an offset from a selected vertical line.", "app": "Autodesk AutoCAD 2021", "details": "The selected vertical line was highlighted and the OFFSET command remained active during the restart."}, {"start_s": 6850.204, "end_s": 6855.367, "action": "Entered an offset distance of 1'-6\", selected drawing geometry, clicked to specify the offset side, and then canceled the OFFSET operation.", "intent": "Attempt a 1'-6\" offset of existing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command ended with Cancel entries and no clearly confirmed offset result."}, {"start_s": 6855.367, "end_s": 6863.661, "action": "Navigated and zoomed the AutoCAD drawing, started LINE, clicked in the canvas, and canceled the unfinished line command.", "intent": "Inspect a closer drawing area and attempt another line operation.", "app": "Autodesk AutoCAD 2021", "details": "The final view was zoomed into the building geometry, with the command line showing repeated cancellations."}, {"start_s": 6863.661, "end_s": 6874.111, "action": "Activated AutoCAD commands, entered and canceled Trim-related operations, and clicked or dragged across the drawing while navigating the geometry. Left the drawing with the command line canceled and the view repositioned.", "intent": "Modify and inspect drawing geometry using Trim and related command prompts.", "app": "AutoCAD", "details": "The Trim prompt was visible before repeated Esc cancellations."}, {"start_s": 6874.111, "end_s": 6878.142, "action": "Entered another AutoCAD command, clicked and dragged in the drawing, then canceled the active operation with repeated Esc presses. Returned to an idle command line with the geometry still visible.", "intent": "Continue modifying or inspecting the drawing and then exit the active command.", "app": "AutoCAD", "details": "The drawing view remained focused on the stair-like linework."}, {"start_s": 6878.142, "end_s": 6884.599, "action": "Entered an offset distance of 2 and activated the Offset command, leaving AutoCAD prompting for an object or point to offset.", "intent": "Create an offset copy of selected drawing geometry at distance 2.", "app": "AutoCAD", "details": "The visible prompt reads \u201cSpecify offset distance\u201d with 2 entered."}, {"start_s": 6884.599, "end_s": 6898.494, "action": "Selected and repeatedly offset drawing lines, producing additional parallel linework in the stair-like geometry. Continued selecting sides for further offsets and left the Offset command active awaiting the next object.", "intent": "Add repeated parallel offsets to the drawing geometry.", "app": "AutoCAD", "details": "The command history shows multiple offset selections and a 2-unit distance."}, {"start_s": 6898.494, "end_s": 6903.983, "action": "Canceled the prior operation, started Extend, and selected drawing geometry to extend a horizontal line across the lower portion of the view. Left the Extend prompt active for another object.", "intent": "Extend selected linework to meet surrounding geometry.", "app": "AutoCAD", "details": "The Extend command prompt and highlighted lower horizontal line are visible."}, {"start_s": 6903.983, "end_s": 6913.793, "action": "Canceled the active command, started Trim, zoomed or repositioned the drawing, and clicked and dragged across the linework to trim an element. Left Trim active while prompting for the next fence point.", "intent": "Trim excess portions of the drawing geometry after adjusting the view.", "app": "AutoCAD", "details": "The command line reports \u201cERASE 1 found\u201d before the final Trim prompt."}, {"start_s": 6913.793, "end_s": 6932.52, "action": "Manipulated the AutoCAD drawing with repeated clicks, drags, middle-button navigation, and scrolling while the TRIM command remained active, then pressed Escape repeatedly to cancel the operation and returned to the drawing view.", "intent": "Modify and inspect linework in the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view showed stepped linework and the TRIM prompt before the command was canceled."}, {"start_s": 6932.52, "end_s": 6940.956, "action": "Pressed Space and Escape while navigating the AutoCAD drawing, then used middle-button clicks and scrolling to reposition the view; began another command with the letter d near the end of the span.", "intent": "Navigate the drawing and initiate another drafting command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible with the command line showing canceled commands."}, {"start_s": 6940.956, "end_s": 6945.572, "action": "Entered a command beginning with li, clicked drawing geometry, and reached the DIMLINEAR prompt requesting the second extension line origin; pressed Escape repeatedly to cancel it.", "intent": "Attempt to create a linear dimension on the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The visible prompt was DIMLINEAR, asking for the second extension line origin."}, {"start_s": 6945.572, "end_s": 6955.356, "action": "Started OFFSET, entered an offset distance of 1'6\", and clicked and dragged on the right-side linework to create or preview an offset; continued selecting geometry while the OFFSET prompt remained active.", "intent": "Offset selected drawing geometry by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET command displayed the entered distance and then requested an object and side point."}, {"start_s": 6955.356, "end_s": 6968.742, "action": "Continued the OFFSET operation by selecting multiple right-side lines and specifying offset sides, producing a dense rectangular grid of parallel linework; pressed Escape repeatedly and left the command awaiting another object selection.", "intent": "Apply repeated offsets to build out the grid-like linework.", "app": "Autodesk AutoCAD 2021", "details": "The resulting view visibly contained closely spaced horizontal and vertical lines on the right side."}, {"start_s": 6968.742, "end_s": 6978.802, "action": "Typed r to invoke TRIM, selected and dragged across the grid and adjacent geometry, and navigated the view with middle-button clicks and scrolling; left TRIM active with prompts for fence points or an object to trim.", "intent": "Trim or adjust the newly created grid and surrounding linework.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the TRIM prompt over enlarged grid geometry."}, {"start_s": 6978.802, "end_s": 6988.855, "action": "Moved and resized the AutoCAD window, entered a control-key command, and navigated the drawing with scrolling and middle-button clicks while the TRIM command remained active.", "intent": "Adjust the view and continue working in the active TRIM operation.", "app": "Autodesk AutoCAD 2021", "details": "The drawing showed a building-like linework layout and the prompt to select an object to trim or extend."}, {"start_s": 6988.855, "end_s": 6999.051, "action": "Selected and dragged across the drawing to define a TRIM fence, then clicked additional points while AutoCAD prompted for the next fence point.", "intent": "Trim multiple intersecting lines using a fence selection.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM command displayed \u201cSpecify next fence point\u201d and the view showed the building linework with dense grid lines."}, {"start_s": 6999.051, "end_s": 7008.944, "action": "Cancelled the active command repeatedly and navigated the drawing with middle-button clicks and scrolling, changing from a wider building view to a closer view of the gridded facade.", "intent": "Exit the unfinished operation and inspect or reposition the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed repeated \u201cCancel\u201d entries; no separate application was opened."}, {"start_s": 7008.944, "end_s": 7018.069, "action": "Activated AutoCAD\u2019s dynamic input, entered numeric command input, clicked and dragged on the drawing, and initiated OFFSET before cancelling the active commands.", "intent": "Create or adjust an offset line in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt showed a distance of 1'6\" and requested a point on the side to offset; the view contained a highlighted vertical line among the grid."}, {"start_s": 7018.069, "end_s": 7028.231, "action": "Entered a command and clicked several linework locations while TRIM was active, used scrolling to reposition the view, then pressed Escape repeatedly to cancel or clear the operation.", "intent": "Trim selected portions of the building linework and reset the command state.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt asked to select an object to trim or shift-select to extend, and the view remained focused on the gridded facade."}, {"start_s": 7028.231, "end_s": 7042.682, "action": "Navigated the drawing with middle-button clicks and scrolling, zooming from a broader building composition into a close-up of the rectangular grid, and cancelled the active command.", "intent": "Inspect different areas of the CAD drawing by changing the view.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed a close-up grid and command-line cancellation messages."}, {"start_s": 7042.682, "end_s": 7050.158, "action": "Activated AutoCAD, entered an offset distance of 8, selected geometry, and clicked to specify the offset side. Pressed Escape repeatedly to cancel the active command.", "intent": "Offset drawing geometry by a specified distance.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 8 and subsequent cancellation."}, {"start_s": 7050.158, "end_s": 7060.751, "action": "Entered an offset distance of 7, selected and offset multiple grid elements through several clicks, then pressed Escape repeatedly to exit the command.", "intent": "Create additional parallel geometry using OFFSET.", "app": "AutoCAD", "details": "The OFFSET prompt showed distance 7 and repeated object-selection prompts."}, {"start_s": 7060.751, "end_s": 7068.056, "action": "Started TRIM, clicked and navigated across the grid with middle-button interactions and scrolling, then canceled the command with Escape.", "intent": "Trim drawing geometry against nearby edges.", "app": "AutoCAD", "details": "The command line visibly displayed TRIM and 'Select object to trim'."}, {"start_s": 7068.056, "end_s": 7075.42, "action": "Started LINE, specified a first point, moved to define the next point with orthogonal tracking visible, then canceled the unfinished line and returned to command entry.", "intent": "Draw a line segment on the grid.", "app": "AutoCAD", "details": "The LINE prompt showed first-point and next-point requests; no completed segment is confirmed."}, {"start_s": 7075.42, "end_s": 7079.64, "action": "Entered an offset distance of 2 and positioned the cursor over the grid while AutoCAD prompted for an object to offset.", "intent": "Prepare another offset operation on the drawing.", "app": "AutoCAD", "details": "The OFFSET command line showed distance 2 and the object-selection prompt."}, {"start_s": 7079.64, "end_s": 7084.015, "action": "Selected grid objects and clicked to specify offset sides, then pressed Escape repeatedly while the OFFSET command remained active.", "intent": "Apply the configured offset to selected drawing geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 2, object selection, and side-selection prompts."}, {"start_s": 7084.015, "end_s": 7100.875, "action": "Activate AutoCAD, enter the TRIM command, and click and drag across drawing geometry while responding to the trim prompt. Cancel the active operation and continue manipulating the view near the end of the span.", "intent": "Trim or modify visible drawing lines.", "app": "AutoCAD 2021", "details": "TRIM prompt remained visible; the drawing showed a rectilinear grid and outlined shapes."}, {"start_s": 7100.875, "end_s": 7106.65, "action": "Pan and click around the drawing, cancel the active command several times, and leave AutoCAD at a repositioned view with the command line showing cancellations.", "intent": "Reposition the drawing and exit unfinished commands.", "app": "AutoCAD 2021", "details": "The view shifted to show a rectangular outline over the grid; the command line showed Cancel messages."}, {"start_s": 7106.65, "end_s": 7113.539, "action": "Start TRIM again, click a drawing element, and drag repeatedly across the central outlined geometry before clicking another point. Leave the command active while AutoCAD requests the next fence point.", "intent": "Trim or select portions of the central drawing geometry.", "app": "AutoCAD 2021", "details": "The TRIM prompt showed 'Specify next fence point' and the central rectangular feature remained visible."}, {"start_s": 7113.539, "end_s": 7124.044, "action": "Wait while the AutoCAD view remains largely unchanged, then click near the bottom of the central rectangle and drag to continue the active fence selection.", "intent": "Continue the TRIM fence selection.", "app": "AutoCAD 2021", "details": "The TRIM command remained active and the central rectangular outline was visible."}, {"start_s": 7124.044, "end_s": 7134.181, "action": "Continue dragging across the drawing, click near the lower edge, and use middle-clicks and scrolling to pan or adjust the view. Press Escape repeatedly and then click again while the TRIM prompt remains available.", "intent": "Adjust the view and continue or reset the active trim selection.", "app": "AutoCAD 2021", "details": "The view shifted to a larger surrounding shape and grid; the trim prompt remained visible."}, {"start_s": 7134.181, "end_s": 7150.008, "action": "Pan and zoom around the drawing with repeated middle-clicks and scrolls, press Escape repeatedly to cancel commands, and switch briefly to Windows Explorer near the end before returning to AutoCAD. Leave the drawing at a shifted view with canceled-command messages.", "intent": "Inspect or reposition the drawing while exiting unfinished operations.", "app": "AutoCAD 2021", "details": "AutoCAD showed multiple Cancel messages and a shifted grid with large outlined shapes; a brief Windows Explorer transition occurred."}, {"start_s": 7150.008, "end_s": 7158.933, "action": "Entered an offset distance of 4, selected points and objects around the doorway, and repeatedly canceled the OFFSET operation.", "intent": "Modify nearby drawing geometry with OFFSET.", "app": "AutoCAD", "details": "OFFSET prompts remained active and returned to object selection before cancellation."}, {"start_s": 7158.933, "end_s": 7165.482, "action": "Canceled the active OFFSET command, entered another offset distance of 4, selected around the doorway, and canceled the operation again.", "intent": "Retry an offset modification on the architectural drawing.", "app": "AutoCAD", "details": "The view zoomed out during the operation; OFFSET was left at object selection."}, {"start_s": 7165.482, "end_s": 7175.389, "action": "Started TRIM, dragged across the drawing, and clicked multiple geometry locations while the command prompted for objects to trim.", "intent": "Trim intersecting drawing geometry around the doorway and surrounding lines.", "app": "AutoCAD", "details": "TRIM remained active with prompts to select objects or shift-select to extend."}, {"start_s": 7175.389, "end_s": 7192.168, "action": "Continued selecting geometry with middle-clicks and zooming or panning, then pressed Escape repeatedly to cancel the active commands.", "intent": "Review and adjust the drawing while abandoning the current edit operation.", "app": "AutoCAD", "details": "The view changed from the doorway close-up to a wider drawing view; command history showed cancellations."}, {"start_s": 7192.168, "end_s": 7198.903, "action": "Started LINE, clicked near the upper-right drawing area, and moved the cursor to specify the next point before canceling the command.", "intent": "Attempt to add a line segment to the drawing.", "app": "AutoCAD", "details": "LINE was left incomplete and canceled with Escape."}, {"start_s": 7198.903, "end_s": 7209.045, "action": "Canceled the incomplete line, started TRIM, zoomed or panned the view, and selected several geometry locations while the trim prompt remained active.", "intent": "Trim additional geometry along the upper-right portion of the drawing.", "app": "AutoCAD", "details": "TRIM remained active at the end of the span."}, {"start_s": 7209.045, "end_s": 7219.177, "action": "Cancelled active commands with Escape, panned and zoomed around the architectural line drawing, and clicked through the drawing area.", "intent": "Navigate and inspect the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "Several command cancellations and view-navigation clicks left the drawing displayed in model space."}, {"start_s": 7219.177, "end_s": 7233.29, "action": "Continued cancelling commands and navigating the drawing with middle-clicks and scrolling, then switched focus within AutoCAD.", "intent": "Reposition the view and clear active command states.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted to a closer architectural detail; no completed edit is visible."}, {"start_s": 7233.29, "end_s": 7250.568, "action": "Resized and repositioned AutoCAD windows, clicked in the drawing, and initiated the LINE command; the command prompt requested a first point and showed dynamic input.", "intent": "Begin drawing a line in the architectural plan.", "app": "Autodesk AutoCAD 2021", "details": "The LINE command remained active near the end, with a first point and next-point prompt visible during the span."}, {"start_s": 7250.568, "end_s": 7257.993, "action": "Navigated and zoomed the drawing, selected a point, and continued the LINE command with orthogonal dynamic input showing a distance and 0-degree direction.", "intent": "Place or extend a line segment in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt still indicated LINE and requested the next point; the visible line geometry was not clearly completed."}, {"start_s": 7257.993, "end_s": 7270.77, "action": "Cancelled the active operation, panned and zoomed around the building detail, and clicked through the drawing; an AutoCAD tooltip briefly identified a line.", "intent": "Inspect nearby geometry and reset the drawing state.", "app": "Autodesk AutoCAD 2021", "details": "The view ended on the architectural detail with command cancellations shown; no confirmed modification is visible."}, {"start_s": 7270.77, "end_s": 7279.099, "action": "Clicked in the drawing and resumed the LINE command, placing or selecting a first point; dynamic input then showed an orthogonal horizontal segment of about 10 feet.", "intent": "Draw a horizontal line segment in the architectural detail.", "app": "Autodesk AutoCAD 2021", "details": "The LINE command remained active with a next-point prompt and 0-degree orthogonal tracking visible."}, {"start_s": 7279.099, "end_s": 7284.414, "action": "Returned to the AutoCAD drawing, entered numeric input, pressed Escape repeatedly to cancel active commands, and clicked in the drawing area.", "intent": "Cancel active command states and reposition focus in the drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the architectural linework was visible."}, {"start_s": 7284.414, "end_s": 7289.533, "action": "Started the LINE command, clicked in the drawing area, and entered dynamic dimensions including 10 and 0 while specifying the next point.", "intent": "Create or continue a line using typed distance input.", "app": "AutoCAD", "details": "The command prompt showed LINE and requested the first or next point."}, {"start_s": 7289.533, "end_s": 7295.741, "action": "Continued the LINE operation with clicks, middle-button navigation, and typed dynamic input; then pressed Escape and zoomed or panned to reveal more of the drawing.", "intent": "Adjust the view and manage the in-progress line command.", "app": "AutoCAD", "details": "Dynamic input showed an angle of 180\u00b0 and a distance value around 1'-5\" before the command was canceled."}, {"start_s": 7295.741, "end_s": 7303.25, "action": "Pressed Escape repeatedly, clicked around the drawing, and used middle-button navigation; the command history briefly showed ERASE 1 found before returning to a canceled state.", "intent": "Cancel commands and remove or inspect a selected drawing element while navigating the view.", "app": "AutoCAD", "details": "The architectural linework remained visible and the view shifted slightly."}, {"start_s": 7303.25, "end_s": 7317.641, "action": "Used repeated middle-button clicks to pan the AutoCAD view across the architectural drawing, shifting the visible linework upward and left.", "intent": "Navigate and inspect another area of the drawing.", "app": "AutoCAD", "details": "No confirmed geometry edit was visible; the view changed while the cursor showed pan navigation."}, {"start_s": 7317.641, "end_s": 7322.181, "action": "Returned focus to the drawing, pressed Escape several times to cancel remaining commands, and left the architectural view displayed.", "intent": "Clear active command states and finish the navigation sequence.", "app": "AutoCAD", "details": "The command history showed repeated canceled entries; no additional geometry change was confirmed."}, {"start_s": 7322.181, "end_s": 7326.936, "action": "Activated AutoCAD, entered and canceled commands, and returned to the drawing view.", "intent": "Reset the active command state while working in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Repeated Esc presses canceled active operations; the architectural line drawing remained visible."}, {"start_s": 7326.936, "end_s": 7332.058, "action": "Started the OFFSET command, entered an offset distance of 0'-4\", and canceled the operation without selecting an object.", "intent": "Prepare an object offset using a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET and prompted for an object after the distance entry, then the command was canceled."}, {"start_s": 7332.058, "end_s": 7336.061, "action": "Entered an offset distance of 4'-0\" in the OFFSET command, then canceled before selecting an object.", "intent": "Set a larger offset distance for a drawing operation.", "app": "Autodesk AutoCAD 2021", "details": "OFFSET advanced to the object-selection prompt, but no object was selected."}, {"start_s": 7336.061, "end_s": 7345.165, "action": "Entered an 8'-0\" offset distance, selected a vertical line, indicated the side for the offset, and then canceled the remaining operation.", "intent": "Create an offset from a selected vertical line.", "app": "Autodesk AutoCAD 2021", "details": "A vertical line was highlighted during the offset; repeated Esc presses ended the command."}, {"start_s": 7345.165, "end_s": 7350.574, "action": "Activated the OFFSET command and entered an 8'-0\" distance, leaving the command awaiting further input.", "intent": "Begin another offset operation with the specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained unchanged while the command line prompted for the next offset step."}, {"start_s": 7350.574, "end_s": 7361.658, "action": "Entered a 6'-0\" offset distance, selected and manipulated drawing geometry near the right side, then canceled the active commands.", "intent": "Attempt another offset operation on the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the drawing with the command line returning to canceled-command messages."}, {"start_s": 7361.658, "end_s": 7378.378, "action": "Entered an offset distance of 1'-6\", selected a drawing line, and clicked several points to continue the OFFSET operation before canceling it with Escape.", "intent": "Create or adjust a parallel line at the specified offset distance.", "app": "AutoCAD", "details": "The OFFSET command remained active and prompted for an object or side point."}, {"start_s": 7378.378, "end_s": 7383.631, "action": "Zoomed or scrolled the drawing, clicked a geometry location, and canceled the active command with Escape.", "intent": "Inspect the drawing area and exit the current command.", "app": "AutoCAD", "details": "The FILLET command was left at the Select first object prompt."}, {"start_s": 7383.631, "end_s": 7397.494, "action": "Entered a trim-related command, selected or dragged across drawing geometry, panned or zoomed with middle-clicks, and continued selecting objects to trim before leaving the command active.", "intent": "Modify intersecting linework using TRIM.", "app": "AutoCAD", "details": "The TRIM prompt asked to select an object to trim or shift-select to extend."}, {"start_s": 7397.494, "end_s": 7401.582, "action": "Clicked two areas of the drawing while the erase operation was active; AutoCAD reported that one object was found.", "intent": "Erase a selected drawing object.", "app": "AutoCAD", "details": "The command line showed ERASE and 1 found."}, {"start_s": 7401.582, "end_s": 7411.321, "action": "Selected or dragged across drawing geometry, navigated with middle-clicks, and repeatedly pressed Escape to cancel the active trim and related commands.", "intent": "Inspect and refine the architectural linework while clearing unfinished commands.", "app": "AutoCAD", "details": "The drawing view shifted, and the command line ended with repeated Cancel messages."}, {"start_s": 7411.321, "end_s": 7417.241, "action": "Started the OFFSET command and entered an offset distance of 2.", "intent": "Prepare to create a parallel line at the specified offset distance.", "app": "AutoCAD", "details": "The dynamic input prompt displayed the entered value 2 and awaited an object selection."}, {"start_s": 7417.241, "end_s": 7421.501, "action": "Entered an offset distance of 2, canceled the active offset operation, and began entering another distance in the AutoCAD dynamic input field.", "intent": "Set or revise an offset distance for the drawing geometry.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the OFFSET prompt was visible."}, {"start_s": 7421.501, "end_s": 7427.077, "action": "Clicked to continue the OFFSET command, canceled the pending selection and command, and returned to an idle command line.", "intent": "Cancel the unsuccessful offset attempt.", "app": "AutoCAD", "details": "The command history showed Cancel messages."}, {"start_s": 7427.077, "end_s": 7435.022, "action": "Entered an offset distance of 5, clicked near the right-side geometry, then canceled the offset operation.", "intent": "Try applying a 5-unit offset to the visible drawing geometry.", "app": "AutoCAD", "details": "The OFFSET prompt and dynamic input showed 5 before cancellation."}, {"start_s": 7435.022, "end_s": 7451.822, "action": "Started TRIM, navigated the drawing view, clicked and middle-clicked around the right-side geometry, and canceled the active trim sequence.", "intent": "Trim selected or crossing geometry in the drawing.", "app": "AutoCAD", "details": "TRIM prompts were visible; the view changed to show more of the drawing."}, {"start_s": 7451.822, "end_s": 7465.5, "action": "Entered an offset distance of 3, clicked the right-side geometry, and left the OFFSET command awaiting a side-selection point after canceling intervening prompts.", "intent": "Apply a 3-unit offset to the visible linework.", "app": "AutoCAD", "details": "Dynamic input and the command history showed OFFSET with distance 3."}, {"start_s": 7465.5, "end_s": 7478.766, "action": "Entered an offset distance of 2 in the dynamic input field and continued editing the command input without confirming a geometry selection.", "intent": "Adjust the offset distance for the next offset operation.", "app": "AutoCAD", "details": "OFFSET remained active in Drawing1.dwg."}, {"start_s": 7478.766, "end_s": 7483.259, "action": "Resized and repositioned AutoCAD, canceled active prompts, then entered the OFFSET command and typed an offset distance of 3.", "intent": "Set up an offset operation in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible with the OFFSET prompt active."}, {"start_s": 7483.259, "end_s": 7489.148, "action": "Selected drawing geometry for OFFSET, adjusted the view with middle-button navigation, canceled the operation, and returned to an idle command state.", "intent": "Attempt to offset selected geometry and review the result.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed repeated cancellation messages."}, {"start_s": 7489.148, "end_s": 7498.817, "action": "Entered an offset distance of 9, selected a line, and positioned the offset side; then canceled the active prompts while navigating the drawing.", "intent": "Create or test an offset at a different distance.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt advanced to selecting an object and specifying the side."}, {"start_s": 7498.817, "end_s": 7515.855, "action": "Canceled the active drawing prompts and panned the view repeatedly with middle-button clicks, moving from the close-up geometry toward the broader facade drawing.", "intent": "Navigate and inspect the drawing after the offset attempts.", "app": "Autodesk AutoCAD 2021", "details": "No definitive geometry creation is visible during the navigation."}, {"start_s": 7515.855, "end_s": 7534.551, "action": "Started the LINE command, clicked a first point, moved the cursor to define the next segment, and entered a displayed distance of 6'-6\" with Ortho enabled; then canceled the line operation.", "intent": "Attempt to draw a straight line segment at a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The LINE prompt showed first-point and next-point stages before cancellation."}, {"start_s": 7534.551, "end_s": 7538.705, "action": "Canceled the remaining LINE prompts and returned AutoCAD to the drawing view with no active command.", "intent": "Exit the unfinished line operation.", "app": "Autodesk AutoCAD 2021", "details": "The command line displayed repeated cancellation messages."}, {"start_s": 7538.705, "end_s": 7543.501, "action": "Resize and repositioned the AutoCAD window, then clicked in the drawing and entered numeric and punctuation input while the LINE command remained active.", "intent": "Continue specifying a line segment in the AutoCAD drawing.", "app": "AutoCAD", "details": "Dynamic input showed an orthogonal horizontal distance and 180\u00b0 direction."}, {"start_s": 7543.501, "end_s": 7550.214, "action": "Canceled the active command with several Esc presses, adjusted the view, clicked in the drawing, and restarted LINE so AutoCAD prompted for a first point.", "intent": "Reset the unfinished line operation and prepare to draw again.", "app": "AutoCAD", "details": "The command line changed from canceled commands to LINE: Specify first point."}, {"start_s": 7550.214, "end_s": 7555.736, "action": "Clicked in the drawing to position the LINE command, briefly entered a value, and continued with the next-point prompt before canceling and typing additional command input.", "intent": "Attempt to place another line segment in the drawing.", "app": "AutoCAD", "details": "Dynamic input showed a 5-foot orthogonal measurement at 90\u00b0/270\u00b0."}, {"start_s": 7555.736, "end_s": 7571.208, "action": "Entered the TRIM command, selected or dragged across drawing geometry, undid an operation, and left TRIM active while moving around the linework and canceling other inputs.", "intent": "Modify and clean up intersecting linework in the drawing.", "app": "AutoCAD", "details": "TRIM displayed \u201cSelect object to trim or shift-select to extend\u201d; an undo message appeared."}, {"start_s": 7571.208, "end_s": 7581.06, "action": "Canceled the prior operation, entered OFFSET, and clicked near a vertical line while AutoCAD prompted for an offset distance; canceled and restarted the operation without completing it.", "intent": "Attempt to create a parallel offset in the drawing.", "app": "AutoCAD", "details": "OFFSET showed the default distance 0'-9\" and the prompt to specify offset distance."}, {"start_s": 7581.06, "end_s": 7585.241, "action": "Canceled the offset-related prompts, clicked in the drawing, and started LINE again by selecting a first point and moving to specify the next point.", "intent": "Draw another line segment in the AutoCAD layout.", "app": "AutoCAD", "details": "Dynamic input showed a 1'-6\" orthogonal vertical displacement and the prompt \u201cSpecify next point or\u201d."}, {"start_s": 7585.241, "end_s": 7591.921, "action": "Switched to AutoCAD, adjusted the drawing view with middle-button navigation, and began the LINE command before cancelling it with Escape.", "intent": "Prepare and attempt a line operation in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 7591.921, "end_s": 7611.383, "action": "Entered the TRIM command, navigated and zoomed the drawing, then repeatedly cancelled the active command.", "intent": "Trim or inspect portions of the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "The command prompt displayed \u201cSelect object to trim or shift-select to extend\u201d; no completed trim is clearly confirmed."}, {"start_s": 7611.383, "end_s": 7621.416, "action": "Entered an offset distance, selected drawing geometry, and initiated OFFSET operations before cancelling them.", "intent": "Create parallel offsets of selected architectural lines.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt was visible and later returned to an idle state after multiple cancellations."}, {"start_s": 7621.416, "end_s": 7628.969, "action": "Entered another offset distance, selected a vertical line, previewed an offset on one side, and cancelled the operation.", "intent": "Offset a vertical architectural line by the entered distance.", "app": "Autodesk AutoCAD 2021", "details": "A temporary parallel line appeared during the OFFSET preview; no final result is confirmed."}, {"start_s": 7628.969, "end_s": 7637.072, "action": "Clicked and dragged around the drawing, performed view navigation, and cancelled active AutoCAD commands.", "intent": "Inspect or adjust the architectural drawing while abandoning unsuccessful operations.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view shifted slightly; the command line ended with repeated cancellations."}, {"start_s": 7637.072, "end_s": 7641.361, "action": "Entered TRIM, selected near the right-side linework, navigated the view, and cancelled without a clearly completed trim.", "intent": "Trim or extend lines in the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt remained active at the end, asking to select an object to trim or shift-select to extend."}, {"start_s": 7641.361, "end_s": 7648.728, "action": "Adjusted the AutoCAD window and view, clicked within the drawing, and pressed Escape repeatedly to cancel active commands; left the drawing at a broader view with the command line cleared.", "intent": "Navigate and reset the drawing workspace.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 7648.728, "end_s": 7653.948, "action": "Adjusted the AutoCAD window and view, then initiated the LINE command so the command line prompted for the first point; pressed Escape repeatedly to cancel and began another command at the end.", "intent": "Prepare and reset a line-drawing operation.", "app": "AutoCAD", "details": "The LINE prompt 'Specify first point' was visible before cancellation."}, {"start_s": 7653.948, "end_s": 7662.209, "action": "Typed the TRIM command, navigated the drawing view, clicked near the right-side linework, and pressed Escape repeatedly while the command prompted to select objects to trim.", "intent": "Trim or inspect intersecting drawing geometry.", "app": "AutoCAD", "details": "The TRIM command was active with cutting edges set to crossing."}, {"start_s": 7662.209, "end_s": 7666.505, "action": "Typed an attempted command and numeric input, which produced an 'Unknown command' message, then pressed Escape repeatedly to dismiss the command state.", "intent": "Attempt a drawing command and recover from an invalid entry.", "app": "AutoCAD", "details": "AutoCAD displayed an unknown-command warning for the entered text."}, {"start_s": 7666.505, "end_s": 7670.719, "action": "Started OFFSET, entered a distance value, clicked and dragged on the right-side geometry, then pressed Escape to cancel; began the TRIM command at the end of the span.", "intent": "Offset selected linework and continue geometry editing.", "app": "AutoCAD", "details": "The OFFSET prompt asked to select an object to offset before cancellation."}, {"start_s": 7670.719, "end_s": 7675.395, "action": "Worked in the TRIM command by dragging across the right-side linework and clicking to define a trim/fence selection, then pressed Escape repeatedly to cancel.", "intent": "Trim portions of the right-side drawing geometry.", "app": "AutoCAD", "details": "The command line prompted for the next fence point while the view focused on the right-side lines."}, {"start_s": 7675.395, "end_s": 7684.205, "action": "Activated AutoCAD, adjusted the drawing view through window resizing and navigation, and repeatedly canceled the active LINE command.", "intent": "Navigate the drawing and clear the active command state.", "app": "AutoCAD", "details": "The drawing remained in model space; the command line showed LINE and then repeated cancellations."}, {"start_s": 7684.205, "end_s": 7694.307, "action": "Maintained the LINE command, navigated the drawing view with middle-button panning or zooming, and clicked to position the next point before leaving the command active.", "intent": "Position the view and continue line construction.", "app": "AutoCAD", "details": "Dynamic input showed \u201cSpecify first point\u201d and later an orthogonal cursor state."}, {"start_s": 7694.307, "end_s": 7705.37, "action": "Navigated around the architectural linework, clicked to continue the LINE operation, then canceled the command repeatedly.", "intent": "Adjust or inspect line geometry while clearing the unfinished operation.", "app": "AutoCAD", "details": "The view shifted across the right side of the drawing and the command prompt showed a next-point state before cancellation."}, {"start_s": 7705.37, "end_s": 7719.739, "action": "Entered and activated TRIM, clicked and dragged across drawing edges, selected or extended fence points, and then canceled the operation while navigating the view.", "intent": "Trim architectural linework using fence selections.", "app": "AutoCAD", "details": "The command line visibly showed TRIM and \u201cSpecify next fence point,\u201d followed by cancellations."}, {"start_s": 7719.739, "end_s": 7733.229, "action": "Continued the TRIM operation with extensive clicks and dragging across the drawing, navigated the view, and canceled the command.", "intent": "Trim or inspect additional edges in the drawing.", "app": "AutoCAD", "details": "The prompt showed \u201cSelect object to trim or shift-select to extend,\u201d with cutting-edge options visible."}, {"start_s": 7733.229, "end_s": 7752.064, "action": "Re-entered TRIM, dragged and clicked across several architectural edges while panning or zooming, then canceled the operation and left AutoCAD at the drawing view.", "intent": "Continue trimming linework and finish the editing attempt.", "app": "AutoCAD", "details": "TRIM settings showed Projection UCS and Edge=No; the final command history displayed cancellations."}, {"start_s": 7752.064, "end_s": 7758.516, "action": "Activated AutoCAD, entered an offset distance, selected a horizontal line, and then canceled the offset operation.", "intent": "Attempt to offset a selected drawing element.", "app": "AutoCAD 2021", "details": "The drawing remained in model space; the command returned to Select object to offset."}, {"start_s": 7758.516, "end_s": 7763.024, "action": "Re-entered the OFFSET command and entered a 1-foot distance, leaving AutoCAD waiting for an object selection.", "intent": "Set the offset distance for another offset operation.", "app": "AutoCAD 2021", "details": "The dynamic prompt displayed 1'-0\"."}, {"start_s": 7763.024, "end_s": 7768.452, "action": "Selected a drawing element for OFFSET, entered a distance of 1, and canceled the operation after the selection prompt returned.", "intent": "Attempt to create an offset copy of a drawing element.", "app": "AutoCAD 2021", "details": "The visible geometry remained largely unchanged."}, {"start_s": 7768.452, "end_s": 7777.868, "action": "Entered a 3-foot offset distance, selected multiple points or objects around the right-side geometry, and canceled the operation.", "intent": "Attempt to offset geometry in the right side of the drawing.", "app": "AutoCAD 2021", "details": "AutoCAD returned to the OFFSET object-selection prompt."}, {"start_s": 7777.868, "end_s": 7787.172, "action": "Started TRIM, repeatedly dragged and clicked across the right-side geometry, then canceled the command.", "intent": "Trim portions of the right-side drawing geometry.", "app": "AutoCAD 2021", "details": "Several horizontal lines remained visible in the right-side region."}, {"start_s": 7787.172, "end_s": 7795.198, "action": "Re-entered OFFSET and entered a 3-foot distance, leaving the command active while hovering near the right-side lines.", "intent": "Prepare another offset operation on the right-side geometry.", "app": "AutoCAD 2021", "details": "The prompt remained at Specify offset distance or and showed 3'-0\"."}, {"start_s": 7795.198, "end_s": 7801.179, "action": "Activated AutoCAD, adjusted the application window, and interacted with the active OFFSET command before typing a command character.", "intent": "Continue or manipulate the drawing edit operation.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible with OFFSET prompting for an object."}, {"start_s": 7801.179, "end_s": 7815.936, "action": "Selected and offset drawing geometry, navigated the view with middle-button interactions, then pressed Escape repeatedly to cancel the active operations.", "intent": "Modify and inspect the architectural linework, then clear unfinished commands.", "app": "AutoCAD", "details": "The view zoomed or panned to show more of the elevation; the command line ended with repeated Cancel messages."}, {"start_s": 7815.936, "end_s": 7826.018, "action": "Started the LINE command and positioned the cursor around the right side of the elevation while AutoCAD displayed first-point and perpendicular tracking prompts.", "intent": "Begin drawing a new line segment in the architectural elevation.", "app": "AutoCAD", "details": "No completed line segment is confirmed; the command remained at the first-point prompt."}, {"start_s": 7826.018, "end_s": 7836.096, "action": "Continued positioning the active LINE command with orthogonal tracking and clicked to define points near the lower-right geometry.", "intent": "Place line geometry aligned with the existing drawing.", "app": "AutoCAD", "details": "AutoCAD displayed LINE prompts and dynamic distances; the line operation remained active."}, {"start_s": 7836.096, "end_s": 7852.115, "action": "Continued the LINE operation while moving and resizing the AutoCAD window, then pressed Escape repeatedly to cancel the unfinished command and adjusted the view.", "intent": "Attempt and then abandon additional line placement.", "app": "AutoCAD", "details": "The final screenshot shows the drawing zoomed in with the command line reporting Cancel."}, {"start_s": 7852.115, "end_s": 7859.063, "action": "Restarted the LINE command, positioned the cursor over the right-side structure, clicked to place a point, and pressed Escape repeatedly to cancel the operation.", "intent": "Attempt another line placement and clear the active command.", "app": "AutoCAD", "details": "The command line ended with Cancel messages; no completed new line is confirmed."}, {"start_s": 7859.063, "end_s": 7866.264, "action": "Activated AutoCAD, interacted with the drawing, and pressed Escape repeatedly to cancel the active operation.", "intent": "Cancel the current drawing command and return to an idle command state.", "app": "AutoCAD", "details": "Drawing1.dwg remained visible with the OFFSET prompt being canceled."}, {"start_s": 7866.264, "end_s": 7871.837, "action": "Entered an offset distance in the dynamic input field, correcting the entry, and left AutoCAD prompting for the offset distance.", "intent": "Set the distance for an OFFSET operation.", "app": "AutoCAD", "details": "The command line showed OFFSET with a distance prompt and the entered value displayed as 1'-6\"."}, {"start_s": 7871.837, "end_s": 7882.563, "action": "Confirmed the offset distance, selected drawing geometry, and clicked sides for repeated offsets before pressing Escape to stop the operation.", "intent": "Create repeated parallel offsets in the drawing.", "app": "AutoCAD", "details": "OFFSET remained active; a vertical line was highlighted and the drawing showed additional closely spaced parallel lines."}, {"start_s": 7882.563, "end_s": 7888.974, "action": "Typed a command, clicked the drawing, and pressed Escape repeatedly to cancel the active trim or selection operation.", "intent": "Cancel the current editing command after inspecting the drawing.", "app": "AutoCAD", "details": "The command line displayed a trim-selection prompt followed by cancellation messages."}, {"start_s": 7888.974, "end_s": 7895.979, "action": "Entered an offset distance of 2'-6\", selected drawing geometry, and clicked to specify the side for the offset.", "intent": "Apply another offset at the specified distance.", "app": "AutoCAD", "details": "OFFSET was active with the distance field showing 2'-6\" and a prompt to select the side."}, {"start_s": 7895.979, "end_s": 7901.576, "action": "Entered an offset distance of 2, selected geometry, and specified a side point; then began typing another command while the offset prompt remained active.", "intent": "Continue creating an offset and prepare the next command.", "app": "AutoCAD", "details": "The drawing showed highlighted offset geometry, and the dynamic prompt contained the partial text 'm' near the end."}, {"start_s": 7901.576, "end_s": 7912.715, "action": "Adjusted the AutoCAD view with repeated middle- and left-button clicks, drags, and scrolling, then canceled active prompts with Escape while navigating the architectural line drawing.", "intent": "Navigate and reposition the drawing view.", "app": "AutoCAD", "details": "The view changed from a wider elevation to a closer view of the gridded architectural elements; command history showed repeated Cancel entries."}, {"start_s": 7912.715, "end_s": 7922.941, "action": "Entered the TRIM command, selected or dragged across drawing geometry, and continued specifying objects to trim while the view shifted to a closer portion of the elevation.", "intent": "Trim architectural linework.", "app": "AutoCAD", "details": "TRIM was visibly active with the prompt to select an object to trim or shift-select to extend."}, {"start_s": 7922.941, "end_s": 7935.288, "action": "Continued navigating the drawing with middle-button clicks and view changes, then pressed Escape repeatedly to cancel the active operation and returned to a broader elevation view.", "intent": "Cancel the current edit and reposition the drawing.", "app": "AutoCAD", "details": "The command line ended with Cancel entries and no active command visible."}, {"start_s": 7935.288, "end_s": 7948.179, "action": "Entered the LINE command after several canceled inputs, moved to the upper-right architectural detail, and left AutoCAD prompting for the first point before canceling.", "intent": "Begin drawing a new line segment.", "app": "AutoCAD", "details": "The LINE prompt visibly requested \u201cSpecify first point,\u201d followed by Cancel entries."}, {"start_s": 7948.179, "end_s": 7955.267, "action": "Entered an offset distance of 1'6\", selected a horizontal architectural edge, and positioned the cursor to specify the side for the offset.", "intent": "Create a parallel offset of existing linework.", "app": "AutoCAD", "details": "OFFSET was active and displayed prompts for selecting an object and specifying the side; the distance field showed 1'6\"."}, {"start_s": 7955.267, "end_s": 7961.276, "action": "Continued the OFFSET operation by clicking successive edges and specifying the side for multiple parallel offsets, adding closely spaced vertical and horizontal linework to the architectural detail.", "intent": "Apply repeated offsets to build the detail.", "app": "AutoCAD", "details": "OFFSET remained active with \u201cnext object\u201d prompts, and new closely spaced lines were visible along the upper detail."}, {"start_s": 7961.276, "end_s": 7974.583, "action": "Continued the OFFSET command while the AutoCAD window was resized; left the drawing at the prompt to select an object to offset.", "intent": "Continue offsetting drawing geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET and \u201cSelect object to offset.\u201d"}, {"start_s": 7974.583, "end_s": 7983.3, "action": "Repeatedly canceled or undid the active OFFSET operation, clicked in the drawing area, and left AutoCAD still awaiting an object selection.", "intent": "Clear the current offset attempt and return to a stable command state.", "app": "AutoCAD", "details": "The command history reported that the command had been completely undone."}, {"start_s": 7983.3, "end_s": 7988.619, "action": "Entered an offset distance of 1' 6\" and returned to the drawing, where OFFSET prompted for an object to offset.", "intent": "Set the offset distance for subsequent geometry editing.", "app": "AutoCAD", "details": "The dynamic input showed \u201cSpecify offset distance\u201d with 1'-6\"."}, {"start_s": 7988.619, "end_s": 7996.899, "action": "Selected drawing geometry and repeatedly clicked points to place offsets, producing additional parallel lines; then pressed Escape several times while OFFSET remained active.", "intent": "Create parallel offset geometry along the building outline.", "app": "AutoCAD", "details": "The command line prompted for points on the side to offset and showed successive distance readouts."}, {"start_s": 7996.899, "end_s": 8005.327, "action": "Started the LINE command, clicked a first point near the upper grid, and canceled the unfinished line after the next-point prompt appeared.", "intent": "Attempt to draw a line segment in the upper portion of the plan.", "app": "AutoCAD", "details": "The command line showed LINE and \u201cSpecify first point,\u201d followed by cancellation."}, {"start_s": 8005.327, "end_s": 8009.759, "action": "Typed a dimension-related command, selected DIMLINEAR from the autocomplete list, and clicked the first extension-line origin; left the command prompting for the second extension-line origin.", "intent": "Begin measuring a linear distance in the drawing.", "app": "AutoCAD", "details": "The autocomplete list included DIMLIN (DIMLINEAR), and the final prompt requested the second extension line origin."}, {"start_s": 8009.759, "end_s": 8014.202, "action": "Activated AutoCAD and entered an offset distance through dynamic input, leaving the OFFSET command active.", "intent": "Set the distance for an offset operation.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg was visible with the OFFSET prompt."}, {"start_s": 8014.202, "end_s": 8019.774, "action": "Clicked in the drawing while OFFSET prompted for an object and side, then pressed Escape repeatedly to cancel or exit the active command.", "intent": "Attempt an offset and clear the pending command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained visible and the OFFSET prompt was active before cancellation."}, {"start_s": 8019.774, "end_s": 8023.924, "action": "Entered and edited a numeric offset value, canceled the input, then restarted OFFSET and began entering another distance.", "intent": "Adjust the offset distance for the drawing operation.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed the OFFSET distance prompt with a fractional architectural value."}, {"start_s": 8023.924, "end_s": 8028.524, "action": "Completed the offset distance entry and clicked an object in the drawing, leaving OFFSET prompting to select another object.", "intent": "Apply the specified offset to a selected drawing element.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET command showed the entered distance and then prompted for an object."}, {"start_s": 8028.524, "end_s": 8035.746, "action": "Clicked and dragged across multiple drawing elements to perform repeated offsets, then pressed Escape several times to stop the operation.", "intent": "Create repeated offset geometry in the drawing and end the command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing showed added parallel lines and repeated OFFSET prompts during the operation."}, {"start_s": 8035.746, "end_s": 8041.347, "action": "Entered the LINE command, clicked to place line points, then canceled the command with Escape.", "intent": "Begin drawing a line and then abandon the unfinished line.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed the LINE prompt initially and multiple Command: *Cancel* messages after cancellation."}, {"start_s": 8041.347, "end_s": 8053.996, "action": "Activated AutoCAD, started a LINE command, navigated the drawing with middle-clicks and scrolling, then repeatedly pressed Escape to cancel the active command.", "intent": "Navigate the drawing and clear an unfinished command.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view changed substantially during navigation; the command line ended in repeated Cancel states."}, {"start_s": 8053.996, "end_s": 8058.576, "action": "Entered and activated TRIM, selected or previewed geometry near the upper-right drawing area, then pressed Escape to cancel the operation.", "intent": "Trim drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The visible prompt changed from TRIM object selection to a canceled command state."}, {"start_s": 8058.576, "end_s": 8068.514, "action": "Started OFFSET, entered a distance of 1, clicked drawing geometry, and navigated the view while canceling or exiting repeated offset selections.", "intent": "Create parallel geometry at a specified offset distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with distance 1 and later canceled selection prompts."}, {"start_s": 8068.514, "end_s": 8083.158, "action": "Navigated and zoomed the drawing with middle-clicks and scroll gestures, repeatedly pressed Escape to clear prompts, and left the drawing in a broader architectural view.", "intent": "Inspect different areas of the drawing and reset active commands.", "app": "Autodesk AutoCAD 2021", "details": "No definitive geometry edit is visible; the command line repeatedly displayed Cancel."}, {"start_s": 8083.158, "end_s": 8090.067, "action": "Entered an offset distance of 1'-6\", selected drawing geometry, and left OFFSET active awaiting another object selection.", "intent": "Offset selected geometry by a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line and dynamic input showed OFFSET with 1'-6\" and a subsequent Select object to offset prompt."}, {"start_s": 8090.067, "end_s": 8094.464, "action": "Entered an offset distance of 2'-0\", selected geometry, and continued with OFFSET awaiting another object selection.", "intent": "Create another offset using a 2-foot distance.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with 2'-0\" and the final screen remained at Select object to offset."}, {"start_s": 8094.464, "end_s": 8103.516, "action": "Continued the AutoCAD OFFSET command by clicking and dragging around the architectural linework, then pressed Escape repeatedly to cancel or exit the active prompts.", "intent": "Modify parallel geometry with OFFSET and stop the operation.", "app": "AutoCAD", "details": "The drawing remained in model space and the command line showed OFFSET prompts."}, {"start_s": 8103.516, "end_s": 8114.892, "action": "Adjusted the view and clicked within the drawing while an active selection or drawing prompt remained, then pressed Escape repeatedly to cancel the operation.", "intent": "Work on the architectural linework and clear an unfinished command.", "app": "AutoCAD", "details": "The view changed between wider and closer views; the command line ended with cancellation messages."}, {"start_s": 8114.892, "end_s": 8122.882, "action": "Pressed Escape several times, started the LINE command, and clicked near the vertical architectural element before cancelling the unfinished line.", "intent": "Attempt to add a line segment and then abandon it.", "app": "AutoCAD", "details": "The command line showed LINE with prompts for the first and next points, followed by cancellation."}, {"start_s": 8122.882, "end_s": 8132.116, "action": "Entered an offset distance of 9, selected the vertical linework, and used repeated clicks to offset it before cancelling or ending the command.", "intent": "Create a parallel copy of the selected architectural line at a specified distance.", "app": "AutoCAD", "details": "The command line displayed OFFSET and the entered distance 9; the vertical object became highlighted during the operation."}, {"start_s": 8132.116, "end_s": 8136.511, "action": "Pressed Escape repeatedly, then restarted OFFSET and entered 9 as the offset distance.", "intent": "Reset the drawing command and prepare another offset operation.", "app": "AutoCAD", "details": "The command line ended at the OFFSET distance prompt with 9 entered."}, {"start_s": 8136.511, "end_s": 8142.259, "action": "Selected successive horizontal and vertical line segments for OFFSET and clicked on opposite sides to preview or create parallel copies, then pressed Escape repeatedly.", "intent": "Continue offsetting architectural linework at the previously entered distance.", "app": "AutoCAD", "details": "The command line showed OFFSET with repeated object-selection and side-selection prompts."}, {"start_s": 8142.259, "end_s": 8147.317, "action": "Switched to AutoCAD, canceled active commands with Escape, and clicked the drawing to leave a vertical element selected.", "intent": "Regain control of the drawing and select geometry.", "app": "AutoCAD", "details": "Drawing1.dwg remained open in model space."}, {"start_s": 8147.317, "end_s": 8154.351, "action": "Canceled commands, navigated the drawing with middle-mouse clicks and scrolling, and erased one identified object before continuing to reposition the view.", "intent": "Remove a selected drawing element and inspect the surrounding geometry.", "app": "AutoCAD", "details": "The command area briefly displayed \u201cERASE 1 found.\u201d"}, {"start_s": 8154.351, "end_s": 8161.317, "action": "Canceled prior commands, adjusted the view repeatedly, and began a new line command by specifying a point and moving toward the next point.", "intent": "Create or extend line geometry in the drawing.", "app": "AutoCAD", "details": "The command area displayed \u201cERASE 2 found\u201d and later \u201cLINE Specify first point.\u201d"}, {"start_s": 8161.317, "end_s": 8168.893, "action": "Continued the active LINE command, clicked in the drawing, moved the cursor with orthogonal tracking and a distance readout, and left AutoCAD prompting for the next point.", "intent": "Draw a straight orthogonal segment in the building geometry.", "app": "AutoCAD", "details": "The visible prompt was \u201cSpecify next point or,\u201d with a 90-degree tracking indicator."}, {"start_s": 8168.893, "end_s": 8178.852, "action": "Navigated with middle-mouse clicks and scrolling to zoom or pan out, revealing a broader view of the architectural elevation.", "intent": "Review the overall drawing after editing.", "app": "AutoCAD", "details": "The view changed from a close-up grid area to a wider building elevation."}, {"start_s": 8178.852, "end_s": 8191.413, "action": "Continued panning and zooming across the elevation, then pressed Escape repeatedly to cancel the active operation and leave the drawing in a wider upper-building view.", "intent": "Inspect the drawing and exit the unfinished command.", "app": "AutoCAD", "details": "Windows Explorer briefly resized in the background; no separate Explorer task was completed."}, {"start_s": 8191.413, "end_s": 8198.307, "action": "Activated AutoCAD and entered offset-distance values while the OFFSET command prompt remained active, clicked in the drawing, then pressed Escape repeatedly to cancel the command.", "intent": "Set or test an offset distance in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained visible with the architectural elevation."}, {"start_s": 8198.307, "end_s": 8204.06, "action": "Returned to the active OFFSET prompt, entered a 10-foot offset value, then pressed Escape repeatedly and began another command entry.", "intent": "Adjust or test the offset operation.", "app": "Autodesk AutoCAD 2021", "details": "The dynamic input showed an offset distance of 10'-0\" before cancellation."}, {"start_s": 8204.06, "end_s": 8217.975, "action": "Navigated and zoomed around the architectural drawing, started the LINE command, clicked in the drawing, and moved the cursor to position the next point before cancelling and restarting the command.", "intent": "Create or position line geometry in the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The LINE prompt progressed from specifying the first point to specifying the next point."}, {"start_s": 8217.975, "end_s": 8227.777, "action": "Continued navigating and zooming the drawing while the LINE command awaited its first point; no completed line was visibly committed.", "intent": "Position the view and prepare to draw a line.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input continued to show \u201cSpecify first point\u201d over the architectural elevation."}, {"start_s": 8227.777, "end_s": 8239.652, "action": "Adjusted the view and used the LINE command to place a first point and preview a segment, then clicked again and left the command awaiting the next point.", "intent": "Draw a line segment in the central area of the elevation.", "app": "Autodesk AutoCAD 2021", "details": "A temporary line preview and angle/length guides were visible."}, {"start_s": 8239.652, "end_s": 8245.235, "action": "Entered and activated the TRIM command, selected or clicked in the drawing while the trim prompt was active, then pressed Escape repeatedly to cancel and return to an idle command line.", "intent": "Trim existing architectural linework.", "app": "Autodesk AutoCAD 2021", "details": "The TRIM prompt asked to select an object to trim, and the final view showed the command cancelled."}, {"start_s": 8245.235, "end_s": 8250.796, "action": "Adjusted the AutoCAD window, entered an offset distance of 8, clicked in the drawing, and cancelled the OFFSET operation.", "intent": "Attempt to create an offset in the building drawing.", "app": "AutoCAD", "details": "The command ended at the prompt to select an object to offset."}, {"start_s": 8250.796, "end_s": 8256.98, "action": "Entered an offset distance of 9, clicked drawing geometry, then cancelled the OFFSET operation with repeated Escape presses.", "intent": "Attempt to offset selected building geometry.", "app": "AutoCAD", "details": "The drawing remained in AutoCAD with OFFSET cancelled."}, {"start_s": 8256.98, "end_s": 8261.129, "action": "Started TRIM, clicked near drawing geometry, and cancelled the active trim selections.", "intent": "Attempt to trim lines in the building drawing.", "app": "AutoCAD", "details": "TRIM displayed the prompt to select an object to trim or extend."}, {"start_s": 8261.129, "end_s": 8266.099, "action": "Cancelled the prior command, zoomed or navigated the drawing, started TRIM again, and clicked several lines before cancelling.", "intent": "Attempt to trim geometry in a closer view.", "app": "AutoCAD", "details": "The view changed to a close-up of the building linework; no confirmed trim result is visible."}, {"start_s": 8266.099, "end_s": 8271.695, "action": "Cancelled active commands, navigated and adjusted the view, then left AutoCAD at the command line after repeated Escape presses.", "intent": "Review or reposition the building drawing while clearing command states.", "app": "AutoCAD", "details": "No completed drawing modification is evident."}, {"start_s": 8271.695, "end_s": 8276.707, "action": "Started the LINE command and moved the cursor to specify the first point, cancelling prior prompts before leaving the command active.", "intent": "Begin drawing a line in the building plan.", "app": "AutoCAD", "details": "LINE remains at the \u201cSpecify first point\u201d prompt."}, {"start_s": 8276.707, "end_s": 8287.5, "action": "Activated AutoCAD and entered offset distances, then clicked to place several offsets in the drawing. Pressed Escape repeatedly to cancel the active offset operation.", "intent": "Create and adjust parallel geometry with the Offset command.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open; the command prompt showed OFFSET and offset-distance/side-selection prompts."}, {"start_s": 8287.5, "end_s": 8293.616, "action": "Canceled the prior command, started Offset again, and entered a 2'-6\" offset distance, leaving AutoCAD waiting for an object selection.", "intent": "Begin another offset operation using a specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The visible prompt showed OFFSET with a 2'-6\" distance and asked to select an object to offset."}, {"start_s": 8293.616, "end_s": 8298.693, "action": "Selected drawing geometry and clicked sides to apply offset operations, then pressed Escape repeatedly to cancel them.", "intent": "Modify the building drawing by offsetting selected geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command ended at a Select object to offset prompt, with the drawing showing added or adjusted linework near the lower center."}, {"start_s": 8298.693, "end_s": 8303.018, "action": "Started the Trim command, clicked drawing elements to trim, and pressed Escape several times while leaving Trim active.", "intent": "Remove unwanted portions of intersecting drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The visible command line showed TRIM and asked to select an object to trim or shift-select to extend."}, {"start_s": 8303.018, "end_s": 8313.72, "action": "Canceled Trim, started Offset, entered a 4'-0\" distance, and clicked multiple objects and sides to create offsets. Pressed Escape repeatedly and left Offset awaiting another object selection.", "intent": "Create additional parallel lines at a four-foot offset.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained in the Offset workflow; the final prompt asked to select an object to offset."}, {"start_s": 8313.72, "end_s": 8324.02, "action": "Started Trim and clicked repeatedly across the zoomed drawing, including fence-style selections and individual geometry, while the view zoomed or panned to a closer area. Left Trim active at the prompt for another object.", "intent": "Trim and refine intersecting linework in a detailed area of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The view changed from the full elevation to a close-up; the command line showed Trim and prompts for next fence points or an object to trim."}, {"start_s": 8324.02, "end_s": 8333.741, "action": "Resized and repositioned the AutoCAD window, interacted with the drawing while TRIM was active, then pressed Escape repeatedly to cancel the command.", "intent": "Modify and inspect drawing geometry using TRIM.", "app": "Autodesk AutoCAD 2021", "details": "The drawing view remained on a building elevation with the TRIM prompt visible before cancellation."}, {"start_s": 8333.741, "end_s": 8341.06, "action": "Activated the LINE command, clicked in the central doorway area to define a vertical line, and canceled the command afterward.", "intent": "Add a vertical line element to the doorway geometry.", "app": "Autodesk AutoCAD 2021", "details": "The resulting view showed a vertical center line within the large doorway."}, {"start_s": 8341.06, "end_s": 8352.449, "action": "Selected and manipulated the central doorway line, invoked OFFSET, and left several closely spaced vertical lines visible before canceling.", "intent": "Create or adjust parallel doorway geometry with OFFSET.", "app": "Autodesk AutoCAD 2021", "details": "The doorway center contained multiple parallel vertical lines, with OFFSET prompts visible."}, {"start_s": 8352.449, "end_s": 8366.574, "action": "Canceled the active command, zoomed and panned around the drawing, and used erase-related interactions before leaving the broader building elevation visible.", "intent": "Inspect the modified geometry and remove an unwanted element.", "app": "Autodesk AutoCAD 2021", "details": "The command area briefly reported that one object was erased."}, {"start_s": 8366.574, "end_s": 8374.212, "action": "Started OFFSET with a distance of 2, selected drawing geometry, and canceled after attempting additional offset selections and view navigation.", "intent": "Offset selected architectural lines by the specified distance.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt showed the distance value 2 and later returned to object selection."}, {"start_s": 8374.212, "end_s": 8384.458, "action": "Activated TRIM, navigated and zoomed across the drawing, selected fence points and attempted trim selections, then left TRIM active.", "intent": "Trim or extend intersecting architectural linework.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed TRIM prompts for selecting an object to trim or shift-select to extend."}, {"start_s": 8384.458, "end_s": 8395.607, "action": "Pressed Escape repeatedly, then middle-clicked and briefly scrolled over the building elevation, panning the AutoCAD view slightly.", "intent": "Navigate and inspect the drawing view while clearing active commands.", "app": "Autodesk AutoCAD 2021", "details": "Building elevation remained visible; command line showed canceled commands."}, {"start_s": 8395.607, "end_s": 8409.818, "action": "Middle-clicked and scrolled to zoom and pan the building elevation, then pressed Escape repeatedly. Resized or moved the AutoCAD window and continued adjusting the view.", "intent": "Reposition and inspect the drawing at different zoom levels.", "app": "Autodesk AutoCAD 2021", "details": "The view changed from a distant full elevation to a closer centered elevation."}, {"start_s": 8409.818, "end_s": 8417.477, "action": "Returned focus to AutoCAD and initiated the LINE command, clicking in the drawing and entering a first point; continued moving and resizing the window while the next-point prompt remained active.", "intent": "Begin drawing a line in the building elevation.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed LINE with prompts for the first and next points."}, {"start_s": 8417.477, "end_s": 8427.482, "action": "Moved and repeatedly resized the AutoCAD window while leaving the active LINE command and next-point prompt on screen.", "intent": "Pause during an in-progress line placement.", "app": "Autodesk AutoCAD 2021", "details": "No completed geometry was visibly confirmed."}, {"start_s": 8427.482, "end_s": 8442.923, "action": "Continued positioning and resizing the AutoCAD window, clicked in the drawing to place or adjust the active line, then pressed Escape several times and middle-clicked to pan. Began another line interaction near the building base before leaving the command active.", "intent": "Edit or place linework around the building elevation while navigating the view.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed orthogonal line placement; the final view showed the command canceled and the elevation shifted."}, {"start_s": 8442.923, "end_s": 8447.312, "action": "Focused AutoCAD and activated the OFFSET command; accepted the displayed offset-distance prompt and left the command waiting for an offset distance.", "intent": "Begin offsetting existing drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with a default distance of 0'-2\"."}, {"start_s": 8447.312, "end_s": 8452.156, "action": "Activated AutoCAD, interacted with the active OFFSET command by selecting points/objects, then pressed Escape repeatedly to cancel it.", "intent": "Attempted to offset a drawing element and exit the command.", "app": "AutoCAD", "details": "The command line showed OFFSET prompts and remained in object-selection mode before cancellation."}, {"start_s": 8452.156, "end_s": 8460.73, "action": "Clicked within the drawing while OFFSET prompts were active, pressed Escape repeatedly to cancel, and used middle-mouse navigation and scrolling to reposition the view.", "intent": "Cancel the unfinished offset operation and inspect a nearby drawing area.", "app": "AutoCAD", "details": "The view shifted to a closer area of the gridded building geometry; the command line displayed cancellation messages."}, {"start_s": 8460.73, "end_s": 8472.273, "action": "Navigated around the drawing and started the LINE command, placing an initial point and moving toward the next point before cancelling or leaving the command active.", "intent": "Begin drawing a line segment near the building outline.", "app": "AutoCAD", "details": "The command line showed LINE with \u201cSpecify first point\u201d and later \u201cSpecify next point\u201d prompts."}, {"start_s": 8472.273, "end_s": 8477.997, "action": "Entered an offset distance, clicked drawing geometry, and pressed Escape repeatedly to cancel the OFFSET operation.", "intent": "Attempt another offset operation on the visible building geometry.", "app": "AutoCAD", "details": "The command line showed OFFSET with distance 9 and an object-selection prompt, ending with cancellation messages."}, {"start_s": 8477.997, "end_s": 8489.522, "action": "Entered the TRIM command, navigated and zoomed around the drawing with middle-mouse actions, clicked geometry, and pressed Escape repeatedly to stop the operation.", "intent": "Trim or inspect portions of the drawing geometry.", "app": "AutoCAD", "details": "The command line showed TRIM and prompted to select objects to trim; the view changed from a close-up to a broader building view."}, {"start_s": 8489.522, "end_s": 8496.754, "action": "Navigated to another close-up area, interacted with the active LINE command by clicking and dragging, then pressed Escape repeatedly to cancel it.", "intent": "Attempt to draw a line near the building outline and exit the unfinished command.", "app": "AutoCAD", "details": "The command line showed LINE with a next-point prompt before cancellation messages appeared."}, {"start_s": 8496.754, "end_s": 8504.191, "action": "Activated TRIM, clicked around the building outline, navigated the drawing with middle-clicks and scrolls, then pressed Escape repeatedly to cancel active commands.", "intent": "Modify or inspect linework near the building outline using TRIM.", "app": "AutoCAD", "details": "TRIM prompt was visible initially; the command was canceled by the end of the span."}, {"start_s": 8504.191, "end_s": 8508.994, "action": "Activated OFFSET, clicked and dragged around the lower building geometry, then pressed Escape repeatedly while the OFFSET prompt remained active.", "intent": "Create or position an offset of selected drawing geometry.", "app": "AutoCAD", "details": "The OFFSET command prompted for an object and then an offset distance; no completed offset is clearly visible."}, {"start_s": 8508.994, "end_s": 8514.368, "action": "Started LINE, clicked points near the lower building outline, and canceled the command after moving across the drawing.", "intent": "Add linework along the lower building geometry.", "app": "AutoCAD", "details": "LINE was active and awaiting points before repeated Escape presses canceled it."}, {"start_s": 8514.368, "end_s": 8523.142, "action": "Activated TRIM, selected or dragged across linework near the lower building outline, then canceled and started LINE again before ending at the first-point prompt.", "intent": "Trim existing geometry and begin adding replacement linework.", "app": "AutoCAD", "details": "The span ended with LINE prompting for its first point."}, {"start_s": 8523.142, "end_s": 8539.878, "action": "Activated OFFSET with a distance entry, clicked and navigated around the lower building outline, canceled several command states, and briefly interacted with the drawing while the view shifted.", "intent": "Offset building outline geometry and review the resulting linework.", "app": "AutoCAD", "details": "OFFSET prompts and repeated cancellations were visible; no unambiguous completed offset is established."}, {"start_s": 8539.878, "end_s": 8543.978, "action": "Activated OFFSET, entered a distance, selected and dragged near the right side of the lower building outline, then canceled and left geometry selected with grips visible.", "intent": "Create or adjust an offset segment along the right side of the building outline.", "app": "AutoCAD", "details": "The final view shows selected geometry with blue grips; the command line had returned to a neutral state."}, {"start_s": 8543.978, "end_s": 8551.223, "action": "Switched to AutoCAD and repeatedly pressed Escape to cancel active commands, leaving the drawing view unchanged.", "intent": "Clear pending AutoCAD commands and return to an idle drawing state.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 8551.223, "end_s": 8555.553, "action": "Entered an offset distance of 6, clicked near the right-side geometry, and then canceled the OFFSET operation.", "intent": "Attempt to offset selected drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed OFFSET with distance 6 and then returned to canceled commands."}, {"start_s": 8555.553, "end_s": 8561.736, "action": "Clicked near the right-side lines, canceled the active operation, and started the EXTEND command before switching to LINE.", "intent": "Modify or extend the right-side drawing geometry.", "app": "Autodesk AutoCAD 2021", "details": "The view showed EXTEND prompting for an object, followed by LINE prompting for a first point."}, {"start_s": 8561.736, "end_s": 8574.404, "action": "Selected points around the right-side geometry and used LINE to draw or preview angled segments, then canceled the command.", "intent": "Add or adjust linework along the right side of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "LINE displayed first-point and next-point prompts with dynamic angle and distance input."}, {"start_s": 8574.404, "end_s": 8579.997, "action": "Started LINE, clicked to place a segment near the lower-right area, and canceled the continuing line command.", "intent": "Create a short line segment in the lower-right portion of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic input showed a line preview with a 5-degree angle before cancellation."}, {"start_s": 8579.997, "end_s": 8590.647, "action": "Canceled the current command, clicked and middle-clicked around the right-side geometry, and initiated LINE again before leaving the drawing with the command canceled.", "intent": "Inspect or adjust the right-side geometry while attempting additional linework.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted to show more of the drawing; LINE ended at a first-point prompt and the command history showed cancellations."}, {"start_s": 8590.647, "end_s": 8603.978, "action": "Activated TRIM, clicked and navigated around drawing geometry, then canceled the command after attempting to trim objects.", "intent": "Modify or clean up intersecting drawing lines.", "app": "AutoCAD", "details": "TRIM prompt remained active while the drawing view and command palette changed."}, {"start_s": 8603.978, "end_s": 8608.135, "action": "Undid a recent operation, canceled active commands, and returned AutoCAD to an idle command prompt.", "intent": "Revert or stop the preceding drawing edit.", "app": "AutoCAD", "details": "The command history showed an erase result and an undo command."}, {"start_s": 8608.135, "end_s": 8622.188, "action": "Selected drawing geometry and navigated the view; entered hatch-edit context showing a patterned rectangular region, then canceled the active operations.", "intent": "Inspect or adjust a hatched area in the drawing.", "app": "AutoCAD", "details": "Hatch Editor was visible briefly, and the patterned region remained in the drawing after cancellation."}, {"start_s": 8622.188, "end_s": 8632.251, "action": "Started HATCH, moved around the drawing while prompted to pick an internal point, then canceled the hatch creation command.", "intent": "Attempt to create a hatch in an enclosed drawing region.", "app": "AutoCAD", "details": "The command line explicitly showed HATCH and \u201cPick internal point\u201d; no new hatch was confirmed."}, {"start_s": 8632.251, "end_s": 8648.808, "action": "Canceled several commands and panned or zoomed around the architectural drawing, reviewing the patterned facade and surrounding geometry.", "intent": "Review the drawing layout and inspect existing geometry.", "app": "AutoCAD", "details": "No confirmed drawing modification occurred during the repeated navigation and cancellations."}, {"start_s": 8648.808, "end_s": 8654.11, "action": "Started DIMLINEAR, selected the first extension-line origin, and left the command waiting for the second extension-line origin before canceling.", "intent": "Attempt to add a linear dimension between two drawing points.", "app": "AutoCAD", "details": "The prompt requested the second extension line origin; the dimension was not completed."}, {"start_s": 8654.11, "end_s": 8659.366, "action": "Entered offset-distance values in AutoCAD's dynamic input, changing the field from 0'-6\" to 1'.", "intent": "Set an offset distance for the active OFFSET command.", "app": "AutoCAD", "details": "The drawing remained visible while the dynamic input field was edited."}, {"start_s": 8659.366, "end_s": 8663.434, "action": "Clicked in the drawing while OFFSET was active, then pressed Escape repeatedly and entered additional keyboard input; the command returned to selecting an object to offset.", "intent": "Attempt to select or adjust geometry for the offset operation and then reset the command state.", "app": "AutoCAD", "details": "The command prompt visibly showed 'Select object to offset' after the interaction."}, {"start_s": 8663.434, "end_s": 8668.259, "action": "Clicked and dragged on drawing geometry, pressed Escape several times, and left AutoCAD in the EXTEND command with a prompt to select an object to extend or trim.", "intent": "Modify or test the active geometry-editing command near the building linework.", "app": "AutoCAD", "details": "The view shifted during the interaction and the EXTEND prompt was visible."}, {"start_s": 8668.259, "end_s": 8678.418, "action": "Returned to the OFFSET command and left the dynamic input distance field active, showing 1'-10\"; middle-clicked in the drawing without completing the command.", "intent": "Prepare or adjust the offset distance for another offset operation.", "app": "AutoCAD", "details": "The prompt remained at 'Specify offset distance'."}, {"start_s": 8678.418, "end_s": 8698.418, "action": "Waited with AutoCAD's OFFSET command active while the drawing view remained visible; made minor window or view movements without completing the prompt.", "intent": "Review the drawing and maintain the pending offset operation.", "app": "AutoCAD", "details": "The dynamic input continued to show an offset distance of 1'-10\"."}, {"start_s": 8698.418, "end_s": 8707.865, "action": "Kept the OFFSET distance prompt active and entered the digit 1 into the dynamic input field.", "intent": "Continue editing the offset distance.", "app": "AutoCAD", "details": "The field still visibly displayed 1'-10\" at the end of the span."}, {"start_s": 8707.865, "end_s": 8716.281, "action": "Entered an offset distance of 11, selected a line to offset, and clicked to specify the side; then canceled the active OFFSET operation.", "intent": "Create an offset line in the drawing.", "app": "AutoCAD", "details": "OFFSET prompt showed distance 11 and subsequent side-selection prompts."}, {"start_s": 8716.281, "end_s": 8732.604, "action": "Canceled the offset-related command, started EXTEND, selected drawing geometry, then switched into TRIM and made additional selections before canceling the active commands.", "intent": "Adjust nearby drawing edges by extending or trimming them.", "app": "AutoCAD", "details": "Prompts visibly changed from EXTEND to TRIM; final command state remained active until repeated Esc presses."}, {"start_s": 8732.604, "end_s": 8740.324, "action": "Selected a brick-pattern hatch area, briefly opened Hatch Editor, and then canceled the hatch-related operation and returned to the normal drawing view.", "intent": "Inspect or modify a hatch region.", "app": "AutoCAD", "details": "Hatch Editor highlighted the brick-pattern region before cancellation."}, {"start_s": 8740.324, "end_s": 8753.246, "action": "Started HATCH, entered the hatch prompt, and left the operation without selecting an internal point; canceled the active command repeatedly.", "intent": "Begin applying a hatch pattern to an enclosed drawing region.", "app": "AutoCAD", "details": "Hatch Creation ribbon was visible with pattern controls and the prompt requested an internal point."}, {"start_s": 8753.246, "end_s": 8764.12, "action": "Opened the hatch pattern gallery, reviewed available patterns including BOX, BRASS, BRICK, and others, and interacted with the gallery while the HATCH command remained active.", "intent": "Choose or review a hatch pattern for the drawing.", "app": "AutoCAD", "details": "The Hatch Creation ribbon and expanded pattern gallery were visible."}, {"start_s": 8764.12, "end_s": 8774.29, "action": "Adjusted the active hatch view or settings by middle-clicking, scrolling, and clicking the hatch controls; changed the visible numeric setting from 2 to 0 while leaving HATCH awaiting an internal point.", "intent": "Refine hatch settings and positioning before placement.", "app": "AutoCAD", "details": "HATCH prompt remained visible, and the final dynamic input showed coordinate values near the crosshair."}, {"start_s": 8774.29, "end_s": 8785.822, "action": "Resized and repositioned the AutoCAD window, clicked in the drawing, pressed Escape repeatedly, and navigated the view with middle-clicks and scrolls; the architectural elevation remained visible while the command line was canceled.", "intent": "Adjust the AutoCAD view and clear active commands.", "app": "AutoCAD", "details": null}, {"start_s": 8785.822, "end_s": 8805.083, "action": "Zoomed and panned the architectural drawing with middle-clicks and scrolls, bringing the full building elevation into a smaller centered view, then pressed Escape to cancel commands.", "intent": "Review the overall drawing extent.", "app": "AutoCAD", "details": null}, {"start_s": 8805.083, "end_s": 8815.529, "action": "Returned to AutoCAD's Hatch Creation mode, clicked the drawing, and opened the hatch pattern gallery showing options including AR-SAND, BOX, BRASS, and BRICK while the command requested an internal point.", "intent": "Choose hatch settings and identify a region to hatch.", "app": "AutoCAD", "details": "HATCH remained active with the prompt \u201cPick internal point or Select objects.\u201d"}, {"start_s": 8815.529, "end_s": 8830.464, "action": "Clicked through hatch pattern controls, changed the visible hatch pattern selection to AR-SAND, BOX, BRASS, and BRICK options, adjusted the view, and then canceled the active hatch interaction with Escape.", "intent": "Experiment with hatch pattern settings and exit the unsuccessful hatch attempt.", "app": "AutoCAD", "details": "The drawing remained in Hatch Creation mode until the command was canceled."}, {"start_s": 8830.464, "end_s": 8835.277, "action": "Entered the TRIM command, clicked near the right-side facade geometry, navigated slightly, and pressed Escape repeatedly without completing a visible trim.", "intent": "Attempt to trim facade linework.", "app": "AutoCAD", "details": "TRIM displayed \u201cSelect object to trim or shift-select to extend.\u201d"}, {"start_s": 8835.277, "end_s": 8847.99, "action": "Returned to Hatch Creation mode, adjusted the AutoCAD view through repeated window movements and resizes, and clicked near the facade while the command continued requesting an internal point; a Hatch boundary definition error window appeared at the end.", "intent": "Retry hatching a bounded facade region.", "app": "AutoCAD", "details": "The hatch command remained active with the prompt \u201cPick internal point,\u201d and the final application state indicated a boundary definition error."}, {"start_s": 8847.99, "end_s": 8852.898, "action": "Switched from File Explorer to AutoCAD, resized and moved the AutoCAD window repeatedly, then pressed Escape several times while the Hatch command remained active and navigated the drawing with middle-clicks.", "intent": "Return to AutoCAD and cancel or exit an active hatch operation.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg showed a building-like line drawing with the prompt to pick an internal point."}, {"start_s": 8852.898, "end_s": 8861.172, "action": "Clicked in the drawing while AutoCAD alternated between line-command and dynamic-input states, then pressed Escape repeatedly and used middle-click navigation; the command ended at a canceled Line prompt.", "intent": "Attempt drawing input and cancel the active command while adjusting the view.", "app": "Autodesk AutoCAD 2021", "details": "The view remained on the right side of the drawing, with LINE prompting for a first or next point before cancellation."}, {"start_s": 8861.172, "end_s": 8871.37, "action": "Started the LINE command and positioned the crosshair over the drawing, then switched to HATCH and moved the cursor toward an enclosed region without completing the hatch.", "intent": "Prepare or attempt to draw and hatch part of the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Prompts progressed from Specify first point for LINE to Pick internal point for HATCH."}, {"start_s": 8871.37, "end_s": 8889.284, "action": "Navigated and zoomed the drawing with middle-clicks and view adjustments, pressed Escape repeatedly, and clicked the patterned right-side region; AutoCAD displayed that region selected in the Hatch Editor.", "intent": "Inspect and select an existing hatch region for editing.", "app": "Autodesk AutoCAD 2021", "details": "The view zoomed out to show more of the structure, and the right vertical patterned area became highlighted."}, {"start_s": 8889.284, "end_s": 8899.252, "action": "Kept the HATCH command active, navigated and zoomed around the patterned region with middle-clicks and scrolls, then pressed Escape repeatedly to cancel the pending operation.", "intent": "Inspect the hatch area and exit the unfinished hatch interaction.", "app": "Autodesk AutoCAD 2021", "details": "The drawing shifted between wider and closer views; the command history showed repeated cancellations."}, {"start_s": 8899.252, "end_s": 8909.53, "action": "Panned and zoomed to a lower portion of the drawing with middle-clicks, clicked within the geometry, and then clicked and dragged near the upper-right navigation area several times.", "intent": "Reposition the drawing view and interact with the visible geometry/navigation controls.", "app": "Autodesk AutoCAD 2021", "details": "The final view showed horizontal structural elements, a central stair-like detail, and the patterned vertical region at the right."}, {"start_s": 8909.53, "end_s": 8920.497, "action": "Canceled active AutoCAD commands, navigated around the architectural elevation with middle-button view controls and scrolling, and left the drawing displayed at a moderate zoom.", "intent": "Inspect or reposition the drawing view.", "app": "AutoCAD", "details": "Visible command history shows repeated Cancel entries; no confirmed drawing edit."}, {"start_s": 8920.497, "end_s": 8931.904, "action": "Entered a command through dynamic input, resized and repositioned the AutoCAD window, then navigated and zoomed across the building elevation. Canceled the active operation and returned to the drawing view.", "intent": "Navigate and inspect a detailed area of the drawing.", "app": "AutoCAD", "details": "The command history ends with Cancel entries and the view shifts between close-up and wider elevation views."}, {"start_s": 8931.904, "end_s": 8938.603, "action": "Entered the HATCH-related command sequence, moved around the drawing, and canceled the operation after AutoCAD reported an invalid selection and prompted for a source object.", "intent": "Attempt to start or use Match Properties/Hatch-related editing.", "app": "AutoCAD", "details": "The command line visibly shows MATCHPROP, Select source object, and Invalid selection."}, {"start_s": 8938.603, "end_s": 8943.415, "action": "Canceled the pending command, zoomed and navigated back to a wider view of the full architectural elevation, then invoked the hatch/match operation again.", "intent": "Reposition the drawing and retry the pending editing command.", "app": "AutoCAD", "details": "The command line shows MATCHPROP and Select source object before the span ends."}, {"start_s": 8943.415, "end_s": 8953.43, "action": "Worked in AutoCAD's Hatch Creation context, kept the Pick internal point prompt active, and adjusted the view with scrolling and repeated clicks near the ribbon controls and drawing.", "intent": "Prepare or apply a hatch by selecting an internal point.", "app": "AutoCAD", "details": "Hatch Creation ribbon is visible with pattern controls, and the command line prompts for an internal point."}, {"start_s": 8953.43, "end_s": 8969.171, "action": "Continued the active hatch operation, zoomed into the patterned facade area, and clicked an internal region; AutoCAD analyzed visible objects and internal islands, then left a facade element selected with blue grips.", "intent": "Apply or preview hatching in the facade region.", "app": "AutoCAD", "details": "The command line shows selecting visible objects and analyzing internal islands; the final view is a close-up with a selected horizontal element."}, {"start_s": 8969.171, "end_s": 8983.106, "action": "Opened and focused AutoCAD, canceled active commands, and used middle-button panning/zooming to adjust the view of the building elevation.", "intent": "Navigate and inspect the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open in Model space."}, {"start_s": 8983.106, "end_s": 8993.145, "action": "Pressed Escape repeatedly and continued middle-button navigation, zooming in on the upper fa\u00e7ade and projecting elements.", "intent": "Inspect details of the building elevation.", "app": "Autodesk AutoCAD 2021", "details": "The view became a close-up of the upper fa\u00e7ade."}, {"start_s": 8993.145, "end_s": 9003.544, "action": "Continued panning and zooming with the middle mouse button, then canceled commands while repositioning the drawing to show more of the fa\u00e7ade and lower structure.", "intent": "Adjust the drawing view for inspection.", "app": "Autodesk AutoCAD 2021", "details": "The building elevation shifted toward the right side of the canvas."}, {"start_s": 9003.544, "end_s": 9023.544, "action": "Panned/zoomed once and then left the AutoCAD view unchanged.", "intent": "Review the overall drawing view.", "app": "Autodesk AutoCAD 2021", "details": "The full building elevation was visible on the right side of the canvas."}, {"start_s": 9023.544, "end_s": 9035.53, "action": "Pressed Escape repeatedly to cancel or clear active AutoCAD commands while keeping the same elevation view visible.", "intent": "Exit active commands and maintain the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "No visible geometry change occurred."}, {"start_s": 9035.53, "end_s": 9053.33, "action": "Panned the drawing slightly, pressed Escape repeatedly, and performed additional scrolling and middle-button navigation near the lower fa\u00e7ade.", "intent": "Continue navigating and inspecting the elevation.", "app": "Autodesk AutoCAD 2021", "details": "The building elevation remained displayed in Model space; no confirmed geometry edits were visible."}, {"start_s": 9053.33, "end_s": 9071.179, "action": "Navigated the AutoCAD drawing with middle-mouse panning and scrolling, repeatedly canceled active commands, and left the building elevation repositioned in view.", "intent": "Review and reposition the architectural drawing.", "app": "AutoCAD", "details": "Drawing1.dwg remained open; the command line showed repeated Cancel entries."}, {"start_s": 9071.179, "end_s": 9078.646, "action": "Entered an offset distance of 2' 6\", selected points along the building base, and canceled the OFFSET operation.", "intent": "Attempt to offset a drawing element near the building base.", "app": "AutoCAD", "details": "The command line displayed OFFSET and then returned to an idle state after cancellations."}, {"start_s": 9078.646, "end_s": 9083.474, "action": "Started the LINE command, clicked points near the left side of the building base, and canceled the unfinished line after zooming or panning the view.", "intent": "Attempt to add a line along the building base.", "app": "AutoCAD", "details": "The command line showed LINE with prompts for the first and next points."}, {"start_s": 9083.474, "end_s": 9088.45, "action": "Continued navigating the elevation with zooming and panning, briefly started another LINE operation near the right side, and canceled it.", "intent": "Inspect the drawing and attempt a base-line edit.", "app": "AutoCAD", "details": "The view shifted between wider and closer views; the command history ended with Cancel."}, {"start_s": 9088.45, "end_s": 9099.027, "action": "Used the typed command sequence and middle-mouse navigation to zoom out and reposition the full building elevation, then canceled the active command.", "intent": "Review the overall elevation and adjust the viewport.", "app": "AutoCAD", "details": "The final view showed most of the building centered at a smaller scale, with repeated Cancel messages."}, {"start_s": 9099.027, "end_s": 9109.001, "action": "Opened Hatch Creation, browsed the hatch pattern gallery by scrolling, and left AutoCAD waiting for an internal point to define the hatch boundary.", "intent": "Prepare to apply a hatch pattern to an enclosed drawing region.", "app": "AutoCAD", "details": "Hatch Creation was active with the prompt \u201cPick internal point\u201d; the pattern gallery displayed options including GRASS and GRATE."}, {"start_s": 9109.001, "end_s": 9119.28, "action": "Adjusted the AutoCAD window and opened the hatch color controls, then clicked through hatch-related controls while keeping the architectural elevation visible.", "intent": "Configure hatch appearance settings.", "app": "Autodesk AutoCAD", "details": "Hatch Creation context is active; a color palette is open in the evidence screenshot."}, {"start_s": 9119.28, "end_s": 9126.28, "action": "Opened the hatch pattern gallery and reviewed available patterns, including gradient and material-style options.", "intent": "Review hatch pattern choices.", "app": "Autodesk AutoCAD", "details": "The expanded gallery visibly lists patterns such as GR_SPHER, GRASS, GRATE, GRAVEL, HEX, HONEY, and HOUND."}, {"start_s": 9126.28, "end_s": 9136.249, "action": "Opened the hatch color palette and clicked within the color options while leaving the drawing unchanged on screen.", "intent": "Adjust or inspect hatch color settings.", "app": "Autodesk AutoCAD", "details": "The color palette is open over the Hatch Creation ribbon."}, {"start_s": 9136.249, "end_s": 9149.706, "action": "Opened and browsed the hatch pattern gallery, then scrolled through its options while the architectural elevation remained visible.", "intent": "Find a suitable hatch pattern.", "app": "Autodesk AutoCAD", "details": "The gallery shows ESCHER, FLEX, GOST_GLASS, GOST_GRO..., GOST_WO..., gradient patterns, GRASS, and GRATE."}, {"start_s": 9149.706, "end_s": 9159.768, "action": "Selected a gradient hatch option and navigated the drawing view, zooming into the upper fa\u00e7ade and exposing dynamic measurement readouts.", "intent": "Inspect the hatch area at closer scale.", "app": "Autodesk AutoCAD", "details": "The drawing changes from a full elevation to a close-up of the upper fa\u00e7ade; measurement labels such as 148'-8\" and 135'-11\" are visible."}, {"start_s": 9159.768, "end_s": 9169.771, "action": "Dragged across the drawing to adjust the view or active hatch interaction, then continued navigating the close-up fa\u00e7ade; the Hatch Transparency field visibly shows 38.", "intent": "Refine or inspect hatch placement and transparency.", "app": "Autodesk AutoCAD", "details": "The close-up remains active with dynamic measurement readouts around 136'-9\" and 157'-6\"."}, {"start_s": 9169.771, "end_s": 9180.906, "action": "Resized and repositioned the AutoCAD window, worked in Hatch Creation, and attempted to select an internal point in the building drawing. Canceled the hatch operation with Escape.", "intent": "Attempt to hatch an enclosed area of the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing1.dwg remained open; the command line showed internal-island analysis before cancellation."}, {"start_s": 9180.906, "end_s": 9187.478, "action": "Switched back to AutoCAD, clicked hatch pattern and property controls, and selected an internal point in the upper building area. Canceled the active hatch prompt with Escape.", "intent": "Adjust hatch settings and attempt another hatch placement.", "app": "Autodesk AutoCAD 2021", "details": "Hatch Creation showed Solid and Gradient options while the command line prompted for an internal point."}, {"start_s": 9187.478, "end_s": 9194.284, "action": "Clicked hatch pattern and property controls, then clicked and dragged on an upper-middle area of the drawing while the internal-point prompt remained active. Pressed Escape repeatedly to cancel.", "intent": "Try placing or configuring a hatch in another enclosed region.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained unchanged visibly; the Hatch command stayed active until cancellation."}, {"start_s": 9194.284, "end_s": 9202.98, "action": "Opened the hatch pattern dropdown showing Solid, Gradient, Pattern, and User defined options, clicked within the drawing, and canceled the command with repeated Escape presses.", "intent": "Review hatch pattern choices and abandon the current hatch attempt.", "app": "Autodesk AutoCAD 2021", "details": "The final view returned to the standard ribbon and showed canceled commands."}, {"start_s": 9202.98, "end_s": 9209.939, "action": "Repositioned the AutoCAD window, opened the hatch pattern dropdown, clicked an upper portion of the drawing, and pressed Escape repeatedly.", "intent": "Continue testing hatch settings and internal-point selection.", "app": "Autodesk AutoCAD 2021", "details": "The hatch prompt remained visible; no confirmed hatch placement was shown."}, {"start_s": 9209.939, "end_s": 9215.061, "action": "Opened the hatch pattern dropdown and clicked an upper-left building area while the internal-point prompt was active. Pressed Escape repeatedly, leaving the command canceled.", "intent": "Attempt one more hatch placement and exit the command.", "app": "Autodesk AutoCAD 2021", "details": "The final drawing view showed the upper area with hatch-like brick lines and canceled command messages."}, {"start_s": 9215.061, "end_s": 9232.926, "action": "Opened AutoCAD Drawing1.dwg, resized and repositioned the window, then used middle-button navigation and repeated Escape presses to inspect and adjust the building elevation view, ending on a zoomed-in lower section.", "intent": "Inspect and navigate the AutoCAD drawing.", "app": "Autodesk AutoCAD 2021", "details": "The drawing remained in Model space with the architectural elevation visible."}, {"start_s": 9232.926, "end_s": 9240.289, "action": "Activated the LINE command, clicked and dragged near the doorway area, then continued the line operation with dynamic input before pressing Escape to cancel or reset it.", "intent": "Attempt to draw a line in the building elevation.", "app": "Autodesk AutoCAD 2021", "details": "Dynamic prompts showed \u201cSpecify first point\u201d and then \u201cSpecify next point\u201d; no completed line is confirmed."}, {"start_s": 9240.289, "end_s": 9250.747, "action": "Entered numeric input and activated OFFSET, supplied an offset distance of 2'-6\", clicked around the doorway and fa\u00e7ade lines, and pressed Escape while navigating the resulting view.", "intent": "Offset selected architectural geometry near the doorway.", "app": "Autodesk AutoCAD 2021", "details": "The OFFSET prompt progressed from distance entry to selecting objects and specifying the side to offset; completion is not confirmed."}, {"start_s": 9250.747, "end_s": 9263.974, "action": "Pressed Escape repeatedly to clear the active command, then waited and performed a small amount of middle-button navigation and scrolling, returning to a wider view of the full elevation.", "intent": "Cancel the unfinished drawing operation and review the overall elevation.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed repeated \u201c*Cancel*\u201d messages and the full building elevation was visible."}, {"start_s": 9263.974, "end_s": 9272.676, "action": "Used middle-button navigation and scrolling to zoom out and reposition the architectural elevation, then pressed Escape several times to finish the navigation state.", "intent": "Adjust the drawing view for an overall inspection.", "app": "Autodesk AutoCAD 2021", "details": "The building became smaller and centered within the drawing area."}, {"start_s": 9272.676, "end_s": 9292.676, "action": "Remained idle in AutoCAD while viewing the centered building elevation.", "intent": "Pause while reviewing the drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 9292.676, "end_s": 9302.67, "action": "Pressed Escape repeatedly, then clicked and dragged within the AutoCAD drawing area while the application window resized several times.", "intent": "Cancel active commands and interact with the drawing view.", "app": "Autodesk AutoCAD 2021", "details": "Architectural elevation remained visible."}, {"start_s": 9302.67, "end_s": 9306.725, "action": "Clicked in the drawing area and pressed Escape repeatedly, leaving the architectural elevation unchanged.", "intent": "Cancel or clear active AutoCAD commands.", "app": "Autodesk AutoCAD 2021", "details": "Command line showed canceled commands."}, {"start_s": 9306.725, "end_s": 9326.725, "action": "Remained idle while viewing the architectural elevation in model space.", "intent": "Review the drawing.", "app": "Autodesk AutoCAD 2021", "details": null}, {"start_s": 9326.725, "end_s": 9345.563, "action": "Pressed Escape repeatedly, then clicked in the drawing area and typed a character as the AutoCAD window resized.", "intent": "Cancel active commands and continue interacting with the drawing.", "app": "Autodesk AutoCAD 2021", "details": "Drawing view remained largely unchanged."}, {"start_s": 9345.563, "end_s": 9350.703, "action": "Activated the AutoCAD drawing, entered Hatch Editor, and clicked the drawing; the command line reported that one hatch was found and its hatch boundary associativity was removed, then zoomed into the facade.", "intent": "Edit and inspect a hatch object in the architectural drawing.", "app": "Autodesk AutoCAD 2021", "details": "Hatch Editor was visible briefly before returning to the standard ribbon."}, {"start_s": 9350.703, "end_s": 9356.118, "action": "Clicked and middle-clicked repeatedly across the zoomed facade, panning and adjusting the view upward while the command line retained the hatch-erasure result.", "intent": "Navigate and inspect the edited facade area.", "app": "Autodesk AutoCAD 2021", "details": "The view shifted from a close-up of the lower facade to higher facade levels."}, {"start_s": 9356.118, "end_s": 9360.298, "action": "Switched to AutoCAD, navigated the drawing with middle-button clicks and scrolling, then canceled the active command with Escape.", "intent": "Inspect or navigate the architectural elevation drawing.", "app": "AutoCAD", "details": "The command line showed ERASE had found one object and removed its hatch boundary association."}, {"start_s": 9360.298, "end_s": 9368.254, "action": "Entered the LOGFILENAME command through dynamic input, selected the autocomplete entry, and confirmed it; AutoCAD displayed the log file path as read-only.", "intent": "Inspect the current AutoCAD log filename setting.", "app": "AutoCAD", "details": "The visible command line showed LOGFILENAME and a path ending in Drawing1_...log (read only)."}, {"start_s": 9368.254, "end_s": 9372.496, "action": "Canceled the command and dynamic input with repeated Escape presses, then made middle-button clicks in the drawing.", "intent": "Return to an idle drawing state and continue inspection.", "app": "AutoCAD", "details": "The command line displayed multiple '*Cancel*' entries."}, {"start_s": 9372.496, "end_s": 9380.075, "action": "Opened dynamic input, typed 'log', selected LOGFILEOFF, and confirmed the command; then canceled the remaining input.", "intent": "Turn off AutoCAD command logging.", "app": "AutoCAD", "details": "The command line visibly showed LOGFILEOFF after confirmation."}, {"start_s": 9380.075, "end_s": 9386.395, "action": "Opened dynamic input, typed 'l', selected or invoked the line command suggestion, then canceled it with Escape.", "intent": "Begin a drawing command, likely LINE, without completing geometry.", "app": "AutoCAD", "details": "Autocomplete visibly listed L (LINE), LAYOUTLINE (XLINE), LOGFILEOFF, LOGFILENAME, LINETYPE, and LENGTH."}, {"start_s": 9386.395, "end_s": 9397.475, "action": "Opened the Save Drawing As dialog, selected the file name field, and replaced its contents by typing a name beginning 'multi storey'.", "intent": "Save the AutoCAD drawing under a new descriptive filename.", "app": "AutoCAD", "details": "The dialog was open in Documents; the file name field showed 'mul' during typing and an autocomplete suggestion for 'MULTI STOREY BUILDING ELEVATION.dwg'."}, {"start_s": 9397.475, "end_s": 9411.793, "action": "Typed the filename \u201cmulti storey elevation\u201d into the Save Drawing As dialog, then clicked Save and switched back to the AutoCAD drawing.", "intent": "Save the drawing under a new filename.", "app": "Autodesk AutoCAD 2021", "details": "The Save Drawing As dialog was open in Documents and the filename field contained the entered name."}, {"start_s": 9411.793, "end_s": 9417.859, "action": "Displayed the renamed drawing \u201cmulti storey elevation.dwg,\u201d then pressed Escape several times and clicked near the upper-left window area.", "intent": "Dismiss the current command state and continue working in the renamed drawing.", "app": "Autodesk AutoCAD 2021", "details": "The elevation drawing was visible in model space."}, {"start_s": 9417.859, "end_s": 9424.332, "action": "Opened the Plot - Model dialog and interacted with the printer/plotter list, moving through plotting options.", "intent": "Configure plotting for the drawing.", "app": "Autodesk AutoCAD 2021", "details": "The plotter dropdown was open with \u201cDWG To PDF.pc3\u201d highlighted."}, {"start_s": 9424.332, "end_s": 9433.778, "action": "Returned to the drawing and initiated the PLOT command, then selected points for a window plot area while the AutoCAD window was repeatedly resized or moved.", "intent": "Define the drawing area to print.", "app": "Autodesk AutoCAD 2021", "details": "The command line showed \u201cSpecify first corner\u201d and \u201cSpecify window for printing.\u201d"}, {"start_s": 9433.778, "end_s": 9444.368, "action": "Displayed the Plot - Model dialog with \u201cDWG To PDF.pc3\u201d selected, set the plot area to Window, and selected two opposite corners for the print window.", "intent": "Set the PDF plotter and specify the drawing window for output.", "app": "Autodesk AutoCAD 2021", "details": "The dialog showed ISO A4 paper, Fit to paper enabled, and Window as the plot area."}, {"start_s": 9444.368, "end_s": 9453.003, "action": "Clicked the paper-size and plot settings controls, changing the paper orientation preview to landscape while leaving the Plot dialog open.", "intent": "Adjust page size and orientation before plotting.", "app": "Autodesk AutoCAD 2021", "details": "The Plot - Model dialog showed ISO A4 (297.00 x 210.00 MM) and the landscape orientation icon."}, {"start_s": 9453.003, "end_s": 9462.836, "action": "Clicked repeatedly in the Plot - Model dialog while specifying the plot window corners and adjusting plot settings.", "intent": "Define the drawing window for plotting.", "app": "Autodesk AutoCAD 2021", "details": "The dialog showed DWG To PDF.pc3, ISO A4 paper, and Window plot area."}, {"start_s": 9462.836, "end_s": 9473.314, "action": "Scrolled through the paper-size list, selected an ARCH E paper size, and changed the drawing orientation to landscape.", "intent": "Configure the plot page size and orientation.", "app": "Autodesk AutoCAD 2021", "details": "The paper-size dropdown was open with ARCH E highlighted; landscape was selected."}, {"start_s": 9473.314, "end_s": 9488.637, "action": "Adjusted the plot settings and confirmed the dialog, then interacted with the file destination control to open the Browse for Plot File window.", "intent": "Proceed with exporting the selected drawing to PDF.", "app": "Autodesk AutoCAD 2021", "details": "The plot dialog displayed ISO A4 landscape settings before the file browser opened."}, {"start_s": 9488.637, "end_s": 9493.788, "action": "Selected the plot-file destination, pressed Enter, and returned through the plot dialog to AutoCAD while the Plot Job Progress window briefly appeared.", "intent": "Confirm the output file location and start the plot job.", "app": "Autodesk AutoCAD 2021", "details": "The drawing returned to view after the plot progress window appeared."}, {"start_s": 9493.788, "end_s": 9512.7, "action": "Switched to Microsoft Edge and reviewed the generated multi storey elevation-Model.pdf, scrolling through the page; then switched back to AutoCAD and moved or resized its window before clicking the drawing area.", "intent": "Review the exported PDF and return to the CAD drawing.", "app": "Microsoft Edge and Autodesk AutoCAD 2021", "details": "Edge displayed the one-page PDF; the PDF showed the building elevation."}], "summary": "Developed and edited a multi-storey building elevation in AutoCAD using line, offset, trim, extend, move, hatch, and dimension tools, then saved it as \u201cmulti storey elevation.dwg.\u201d Configured a DWG-to-PDF plot, exported the drawing, and reviewed the resulting PDF in Microsoft Edge."}