{"annotations": [{"start_s": 0.0, "end_s": 5.91, "action": "Waited while the recorder window remained visible, then brought SketchUp\u2019s \u201cWelcome to SketchUp\u201d window into the active application state.", "intent": "Switch to SketchUp for the modeling task.", "app": "Screen recorder / SketchUp", "details": "The recorder displayed the KIT\u0421HEN2 recording task with Finish and Deliver, Pause, and Cancel run controls."}, {"start_s": 5.91, "end_s": 11.368, "action": "Switched briefly to the recorder window, then returned to SketchUp\u2019s welcome window.", "intent": "Return to the SketchUp workspace after checking the recording overlay.", "app": "Screen recorder / SketchUp", "details": "No model editing was visible during the brief application switches."}, {"start_s": 11.368, "end_s": 23.076, "action": "Scrolled through SketchUp\u2019s Home page to review saved model cards, moving from entries such as Shelves2 and SLEVES to lower entries including wall shelves, recovered Untitled models, jali 1, and ELEVATION1.", "intent": "Browse available SketchUp models.", "app": "SketchUp", "details": "The Home page remained open; no model was opened during the scrolling."}, {"start_s": 23.076, "end_s": 34.593, "action": "Clicked a recovered \u201cUntitled\u201d model card and opened its recovery detail dialog, which stated that the model must be opened and renamed or deleted.", "intent": "Inspect a recovered SketchUp model.", "app": "SketchUp", "details": "The dialog showed Delete and Open controls for the recovered Untitled model."}, {"start_s": 34.593, "end_s": 43.244, "action": "Clicked through the recovered-model dialog and navigated the Home page, scrolling among saved and recovered model cards; then switched away from SketchUp to the recorder window.", "intent": "Review recovered and saved SketchUp files without editing a model.", "app": "SketchUp / Screen recorder", "details": "The Home page showed wall shelves, dddddddddd, recovered Untitled, jali 1, ELEVATION1, and EXTERIOR4."}, {"start_s": 43.244, "end_s": 49.167, "action": "Clicked repeatedly in SketchUp while the application became unresponsive, leaving a blank window titled \u201cSketchUp (Not Responding),\u201d then switched back toward the recorder.", "intent": "Attempt to continue interacting with SketchUp after it stopped responding.", "app": "SketchUp / Screen recorder", "details": "No model content or successful command result was visible after SketchUp became unresponsive."}, {"start_s": 49.167, "end_s": 56.29, "action": "Displayed the SketchUp Application not-responding report, then switched to the recorder window while SketchUp remained unresponsive.", "intent": "Monitor the stalled SketchUp application and its Windows error reporting.", "app": "Windows Problem Reporting; Screen recorder", "details": "Windows reported that SketchUp was not responding and was reporting the problem to Microsoft."}, {"start_s": 56.29, "end_s": 62.533, "action": "Returned to SketchUp\u2019s Welcome Home screen and scrolled through the recent-files area until project thumbnails such as Shelves2, SLEVES, and Untitled were visible.", "intent": "Review available recent SketchUp files.", "app": "SketchUp", "details": "The Welcome to SketchUp screen showed recent project cards after scrolling."}, {"start_s": 62.533, "end_s": 68.281, "action": "Switched away from the Welcome screen to a blank loading SketchUp window, then clicked the window controls while SketchUp displayed as not responding.", "intent": "Attempt to manage the unresponsive SketchUp window.", "app": "SketchUp", "details": "The window remained blank with a loading indicator and later showed \u201cSketchUp (Not Responding).\u201d"}, {"start_s": 68.281, "end_s": 74.132, "action": "Displayed the Windows not-responding dialog for SketchUp, resized the problem-reporting window, and clicked through the report so it began reporting the hang to Microsoft.", "intent": "Handle the SketchUp hang through Windows Problem Reporting.", "app": "Windows Problem Reporting", "details": "The dialog offered \u201cClose the program\u201d and \u201cWait for the program to respond\u201d; subsequent reporting progress was visible."}, {"start_s": 74.132, "end_s": 90.682, "action": "Switched to the recorder window, then returned to SketchUp\u2019s Welcome Home screen and waited while the templates and recent files loaded; clicked near the upper content area near the end.", "intent": "Resume viewing SketchUp\u2019s start screen after the application recovery attempt.", "app": "Screen recorder; SketchUp", "details": "The recorder showed the active KITCHEN2 recording, and SketchUp displayed templates plus recent files."}, {"start_s": 90.682, "end_s": 108.307, "action": "Switched back to the recorder and left the SketchUp Welcome screen visible with Architectural and Simple templates and recent files including Shelves2, SLEVES, and Untitled; the view then changed to a blank SketchUp window.", "intent": "Continue monitoring the SketchUp session after the hang.", "app": "Screen recorder; SketchUp", "details": "The final evidence showed SketchUp\u2019s blank white window with no model content loaded."}, {"start_s": 108.307, "end_s": 118.548, "action": "Switched among SketchUp plugin windows, resized the SketchUp window, and scrolled in the empty modeling workspace before middle-clicking.", "intent": "Navigate the SketchUp workspace and plugin windows.", "app": "SketchUp", "details": "The blank model area remained visible."}, {"start_s": 118.548, "end_s": 128.516, "action": "Scrolled and middle-clicked in the SketchUp workspace, then opened the File menu and hovered over Import.", "intent": "Begin importing content into the SketchUp model.", "app": "SketchUp", "details": "The File menu showed the Import command and its submenu."}, {"start_s": 128.516, "end_s": 132.68, "action": "Activated Import and waited for the file picker to load, then clicked within the dialog.", "intent": "Choose a file to import into SketchUp.", "app": "SketchUp", "details": "An Import file dialog opened to the Documents folder."}, {"start_s": 132.68, "end_s": 136.794, "action": "Returned to SketchUp, reopened the File menu, and navigated back to Import while the file picker briefly appeared and was hidden.", "intent": "Continue the import workflow.", "app": "SketchUp", "details": "The File menu and Import submenu were visible at the end."}, {"start_s": 136.794, "end_s": 146.598, "action": "Opened the Import dialog in Downloads, selected the JPEG named \u201cWhatsApp Image 2026-10-10 at 9.41.55 AM,\u201d and clicked Import.", "intent": "Import the selected image into the SketchUp model.", "app": "SketchUp", "details": "The dialog was set to import the file as an Image."}, {"start_s": 146.598, "end_s": 156.853, "action": "Scrolled and placed the imported kitchen image in the SketchUp workspace, then selected it and left the model modified.", "intent": "Position and finalize placement of the imported reference image.", "app": "SketchUp", "details": "The kitchen image appeared on a white rectangular plane; the title changed to \u201cUntitled* - SketchUp 2024.\u201d"}, {"start_s": 156.853, "end_s": 167.292, "action": "Scrolled through the SketchUp scene and orbited the camera, shifting from a full kitchen view to a slightly adjusted perspective.", "intent": "Inspect the modeled kitchen from different angles.", "app": "SketchUp 2024", "details": "Displayed an interior kitchen model with cabinetry, island, appliances, and shelving."}, {"start_s": 167.292, "end_s": 177.132, "action": "Orbited and zoomed the SketchUp camera toward the refrigerator and open shelving, then returned to a wider kitchen view.", "intent": "Examine the refrigerator and shelving area, then reframe the model.", "app": "SketchUp 2024", "details": "Camera navigation used middle-click and scroll gestures; no geometry was edited."}, {"start_s": 177.132, "end_s": 188.07, "action": "Zoomed and panned across the kitchen island, stools, plants, refrigerator, and shelving; the window view was briefly resized or moved during navigation.", "intent": "Inspect details around the island and refrigerator side of the model.", "app": "SketchUp 2024", "details": "The view ended on a closer perspective of the island and adjacent shelving."}, {"start_s": 188.07, "end_s": 195.03, "action": "Scrolled and orbited far outward, reducing the kitchen model to a small view within the surrounding SketchUp axes.", "intent": "Change the camera framing to view the model from a distant perspective.", "app": "SketchUp 2024", "details": "The kitchen remained visible on a white rectangular plane against the modeling workspace."}, {"start_s": 195.03, "end_s": 204.388, "action": "Made a small scroll and orbited the distant SketchUp view, slightly changing the orientation and position of the small kitchen model.", "intent": "Fine-tune the distant camera angle.", "app": "SketchUp 2024", "details": "No modeling or selection changes were visible."}, {"start_s": 204.388, "end_s": 224.388, "action": "Remained idle with the distant kitchen model visible in SketchUp.", "intent": "Pause while reviewing the current scene view.", "app": "SketchUp 2024", "details": null}, {"start_s": 224.388, "end_s": 238.993, "action": "Resumed in SketchUp and typed \u201cR\u201d while the drawing area remained visible with the kitchen reference image and no completed new geometry.", "intent": "Prepare or begin a modeling command in SketchUp.", "app": "SketchUp 2024", "details": "System configuration and network-related changes occurred during the interval."}, {"start_s": 238.993, "end_s": 250.971, "action": "Clicked in the modeling area to draw a horizontal blue line, then completed a gray planar face; the window was resized near the end of the span.", "intent": "Create a flat rectangular or polygonal surface in the SketchUp model.", "app": "SketchUp 2024", "details": "The status bar showed drawing dimensions while the face was being created."}, {"start_s": 250.971, "end_s": 270.971, "action": "Remained idle in SketchUp with the gray planar face and kitchen reference image visible; no interaction was recorded.", "intent": "Pause or review the current model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 270.971, "end_s": 290.971, "action": "Remained idle in SketchUp with the gray planar face visible and the drawing cursor positioned nearby; no modeling change was recorded.", "intent": "Continue reviewing or waiting in the modeling workspace.", "app": "SketchUp 2024", "details": "System configuration and network-related changes occurred during the interval."}, {"start_s": 290.971, "end_s": 303.504, "action": "Kept the SketchUp view unchanged, then moved or resized a Windows Explorer window near the end of the interval.", "intent": "Maintain the model view while adjusting another window.", "app": "SketchUp 2024", "details": "The visible model still contained the gray planar face and kitchen reference image."}, {"start_s": 303.504, "end_s": 323.504, "action": "Remained in SketchUp with the cursor over the gray face; the \u201cOn Face\u201d inference tooltip appeared while no click or geometry change was recorded.", "intent": "Position the drawing tool on the existing face, likely preparing another modeling operation.", "app": "SketchUp 2024", "details": "System configuration and network-related changes occurred around 310.87 seconds."}, {"start_s": 323.504, "end_s": 336.144, "action": "Started drawing a rectangle on the SketchUp ground plane and dragged to define its opposite corner, leaving the rectangle tool active.", "intent": "Create a rectangular base or layout element.", "app": "SketchUp 2024", "details": "A dark rectangular face is visible near the origin."}, {"start_s": 336.144, "end_s": 347.679, "action": "Clicked and dragged on the ground plane to create a second rectangular face to the right of the first.", "intent": "Add another rectangular layout element.", "app": "SketchUp 2024", "details": "Two separate dark rectangular faces are visible."}, {"start_s": 347.679, "end_s": 367.679, "action": "Paused with the SketchUp model unchanged and the rectangle tool still active.", "intent": "Wait or review the current layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 367.679, "end_s": 372.484, "action": "Adjusted the SketchUp view with a scroll input, shifting the displayed model slightly.", "intent": "Reposition the viewport for continued modeling.", "app": "SketchUp 2024", "details": "The reference image and two rectangular faces remain visible."}, {"start_s": 372.484, "end_s": 392.484, "action": "Paused with no recorded interaction while viewing the SketchUp scene.", "intent": "Review the current model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 392.484, "end_s": 406.479, "action": "Clicked and dragged on the ground plane to begin another large rectangle, leaving its blue outline and active opposite-corner operation visible.", "intent": "Create a third rectangular layout element.", "app": "SketchUp 2024", "details": "The new rectangle outline overlaps the area around the right-hand existing face."}, {"start_s": 406.479, "end_s": 411.174, "action": "Clicked several points in the SketchUp workspace, creating or repositioning a gray rectangular face above the other gray faces.", "intent": "Continue constructing planar geometry in the model.", "app": "SketchUp 2024", "details": "The kitchen reference image and multiple gray rectangular faces remained visible."}, {"start_s": 411.174, "end_s": 431.174, "action": "Paused with the SketchUp scene unchanged, leaving the drawing tool active over the gray faces.", "intent": "Wait or review the current model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 431.174, "end_s": 450.888, "action": "Zoomed out and then back across the SketchUp workspace using scroll input, changing the view scale between the kitchen reference image and gray faces.", "intent": "Adjust the viewport to inspect the model layout.", "app": "SketchUp 2024", "details": "The final view showed the kitchen image enlarged on the left and gray faces on the right."}, {"start_s": 450.888, "end_s": 469.623, "action": "Scrolled through the SketchUp viewport, changing the framing so the kitchen reference image and gray rectangular faces appeared at different scales.", "intent": "Inspect the relationship between the reference image and modeled faces.", "app": "SketchUp 2024", "details": "The tooltip \u201cOn Face in Image\u201d appeared while the drawing cursor hovered near the reference image."}, {"start_s": 469.623, "end_s": 484.07, "action": "Continued scrolling to zoom toward the kitchen reference image, bringing the sink, counters, island, and appliances into clearer view while retaining some gray faces at right.", "intent": "Examine details of the kitchen reference image.", "app": "SketchUp 2024", "details": "No geometry edit was visibly completed during the scrolling."}, {"start_s": 484.07, "end_s": 496.561, "action": "Paused over the enlarged kitchen reference image, then scrolled slightly farther to zoom in on the sink, cooktop, oven, refrigerator, and island.", "intent": "Refine the viewport for closer inspection of the kitchen layout.", "app": "SketchUp 2024", "details": "The tooltip \u201cOn Face in Image\u201d was visible before the final zoom."}, {"start_s": 496.561, "end_s": 507.104, "action": "Scrolled and middle-clicked repeatedly in the SketchUp viewport, changing the camera from a close kitchen view to a wider view of the full kitchen model.", "intent": "Inspect the modeled kitchen from different zoom levels.", "app": "SketchUp 2024", "details": null}, {"start_s": 507.104, "end_s": 517.005, "action": "Scrolled extensively to zoom far out, then middle-clicked and dragged in the viewport, leaving the kitchen image small at left and several separate gray planar shapes visible.", "intent": "Navigate the 3D workspace and inspect surrounding geometry.", "app": "SketchUp 2024", "details": "The viewport briefly showed an \u201cOn Face in Image\u201d inference tooltip."}, {"start_s": 517.005, "end_s": 522.479, "action": "Dragged in the viewport and clicked a gray shape, then continued scrolling to zoom toward the kitchen image while the surrounding gray shapes disappeared from view.", "intent": "Adjust the view and select or inspect geometry near the workspace.", "app": "SketchUp 2024", "details": null}, {"start_s": 522.479, "end_s": 536.503, "action": "Scrolled to zoom and reposition the viewport, bringing the kitchen model image into a larger view on the left side of the workspace.", "intent": "Refine the camera view for inspecting the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 536.503, "end_s": 546.255, "action": "Scrolled repeatedly to zoom farther out and repositioned the view so the kitchen image became smaller; typed \u201cR\u201d near the end of the span.", "intent": "Continue navigating the SketchUp workspace and invoke a tool or command.", "app": "SketchUp 2024", "details": null}, {"start_s": 546.255, "end_s": 556.799, "action": "Scrolled slightly, typed a space and \u201cT,\u201d then clicked repeatedly in the viewport; the tool changed to guide creation and a red guide measurement line with dashed inference lines appeared.", "intent": "Create or position a guide in the SketchUp scene.", "app": "SketchUp 2024", "details": "The status bar showed \u201cClick to create a guide\u201d and a Length value of 324' 3 3/4\"."}, {"start_s": 556.799, "end_s": 566.646, "action": "Scrolled slightly, then clicked repeatedly while positioning a guide from the model origin toward the right; adjusted the guide length and view.", "intent": "Position a construction guide at a measured distance.", "app": "SketchUp 2024", "details": "Guide placement remained active; the reference kitchen image was visible at left."}, {"start_s": 566.646, "end_s": 576.696, "action": "Entered 600 into the active measurement field, leaving the guide preview in place.", "intent": "Set the guide distance numerically.", "app": "SketchUp 2024", "details": "The measurement field displayed the entered value."}, {"start_s": 576.696, "end_s": 587.013, "action": "Typed MM, confirmed with Enter, added a space, scrolled, and clicked the middle mouse button to change the view; the guide preview was cleared from the active input state.", "intent": "Complete the guide measurement entry and adjust the modeling view.", "app": "SketchUp 2024", "details": "The view shifted away from the reference image toward the axes and guide lines."}, {"start_s": 587.013, "end_s": 596.879, "action": "Middle-clicked and continuously scrolled to navigate the camera, zooming and panning across the axes and dashed guide lines.", "intent": "Reposition the camera for continued modeling.", "app": "SketchUp 2024", "details": "The camera moved progressively farther from the visible model geometry."}, {"start_s": 596.879, "end_s": 608.43, "action": "Typed ZZZZZZ and a space while scrolling extensively; activated the zoom tool and changed the field of view to 35 degrees.", "intent": "Navigate and adjust the camera view.", "app": "SketchUp 2024", "details": "The workspace showed mostly axes and dashed guide lines with the model out of view."}, {"start_s": 608.43, "end_s": 616.093, "action": "Scrolled further, clicked twice near the left side of the workspace, then middle-clicked at two locations and continued slight scrolling to orbit or pan the camera.", "intent": "Refine the camera position around the guide geometry.", "app": "SketchUp 2024", "details": "The final view remained focused on the axes and diagonal dashed guide lines."}, {"start_s": 616.093, "end_s": 625.887, "action": "Scrolled repeatedly through the SketchUp viewport, shifting the visible model and axes until the scene was mostly empty.", "intent": "Navigate the 3D viewport to inspect or reposition the scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 625.887, "end_s": 636.886, "action": "Typed \u201cT,\u201d clicked and dragged in the viewport, and continued scrolling. Clicked again, leaving the Tape Measure tool active with a guide line and a visible length readout.", "intent": "Create or adjust a measurement guide in the model.", "app": "SketchUp 2024", "details": "The Tape Measure status bar and guide line were visible."}, {"start_s": 636.886, "end_s": 646.743, "action": "Scrolled slightly while keeping the Tape Measure tool active; hovered over the guide and then pressed Space, after which the guide point was no longer shown.", "intent": "Inspect the guide and then change the active tool or cancel the measurement operation.", "app": "SketchUp 2024", "details": "A tooltip reading \u201cOn Line\u201d appeared during the guide inspection."}, {"start_s": 646.743, "end_s": 657.729, "action": "Scrolled extensively through the viewport, dragged across the scene, clicked, and pressed a key, changing the view so the previously visible guide geometry was selected or highlighted in blue.", "intent": "Reposition and inspect the SketchUp scene and guide geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 657.729, "end_s": 667.781, "action": "Scrolled and then middle-clicked to orbit or navigate the viewport, bringing a small kitchen reference image into view; the final middle-click changed to a wider view with the image floating near the axes.", "intent": "Navigate the 3D scene to inspect the imported kitchen reference image.", "app": "SketchUp 2024", "details": "The reference image showed a rendered kitchen with cabinetry and an island."}, {"start_s": 667.781, "end_s": 677.897, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom around the scene, moving from the kitchen reference image to a standing scale figure and ending with the figure enlarged at the left of the viewport.", "intent": "Adjust the camera view to inspect scene scale and the inserted figure.", "app": "SketchUp 2024", "details": "The final view prominently displayed a standing woman scale figure near the model axes."}, {"start_s": 677.897, "end_s": 687.998, "action": "Typed a tool shortcut and clicked repeatedly to place and extend a guide line in the SketchUp workspace.", "intent": "Create or position a construction guide.", "app": "SketchUp 2024", "details": "The guide tool remained active and the visible guide geometry changed position."}, {"start_s": 687.998, "end_s": 698.544, "action": "Clicked to continue the guide, entered 600, then entered MM and pressed Enter; left the tool active afterward.", "intent": "Set a precise guide distance using a numeric measurement.", "app": "SketchUp 2024", "details": "The Measurements box visibly showed 6 after the numeric entry."}, {"start_s": 698.544, "end_s": 707.927, "action": "Scrolled the SketchUp view and typed the guide-tool shortcut, leaving the workspace showing the guide lines and figure.", "intent": "Adjust the view while working with construction guides.", "app": "SketchUp 2024", "details": "The camera view shifted and the guide lines remained visible."}, {"start_s": 707.927, "end_s": 717.406, "action": "Waited with the guide tool active, then scrolled the SketchUp view to reposition the construction geometry.", "intent": "Review and adjust the current guide layout.", "app": "SketchUp 2024", "details": "No new geometry was visibly created during the interval."}, {"start_s": 717.406, "end_s": 725.551, "action": "Clicked in the workspace, scrolled repeatedly, and used middle-button navigation to orbit or pan the SketchUp view around the guide lines and figure.", "intent": "Reorient the 3D workspace for inspection or further guide placement.", "app": "SketchUp 2024", "details": "The view changed substantially while the guide lines stayed visible."}, {"start_s": 725.551, "end_s": 743.146, "action": "Selected an area with a drag rectangle, opened the File menu, and navigated to Import so the import submenu appeared; switched to the SketchUp Import window.", "intent": "Begin importing a file into the SketchUp model.", "app": "SketchUp 2024", "details": "The File menu was open with Import highlighted and its submenu visible at the end."}, {"start_s": 743.146, "end_s": 761.0, "action": "Scrolled repeatedly through the Downloads list in SketchUp\u2019s Import dialog while reviewing available files; left the filename field unchanged.", "intent": "Review available import files.", "app": "SketchUp 2024", "details": "The Import dialog remained open over the SketchUp model."}, {"start_s": 761.0, "end_s": 772.17, "action": "Selected the filename field, cleared its contents, entered \u201cKI,\u201d accepted the suggested \u201ckitchen mm(for students).dwg\u201d filename, and clicked Import.", "intent": "Choose and import the kitchen DWG file.", "app": "SketchUp 2024", "details": "The import dialog showed the filename kitchen mm(for students).dwg before Import was clicked."}, {"start_s": 772.17, "end_s": 779.362, "action": "Waited for the DWG import to complete, reviewed the Import Results dialog, and clicked Close.", "intent": "Review the completed import and dismiss its results.", "app": "SketchUp 2024", "details": "Import Results reported imported entities and some ignored or out-of-range AutoCAD entities."}, {"start_s": 779.362, "end_s": 789.208, "action": "Scrolled and adjusted the SketchUp view around the imported line drawings, then clicked in the modeling area to navigate the model.", "intent": "Inspect and reposition the imported floor-plan drawings.", "app": "SketchUp 2024", "details": "Multiple plan-like line drawings were visible in the modeling area."}, {"start_s": 789.208, "end_s": 794.249, "action": "Continued orbiting and zooming the SketchUp view to bring the imported floor-plan drawings into clearer view.", "intent": "Inspect the imported floor plans.", "app": "SketchUp 2024", "details": "The view showed several separate black line-plan drawings arranged across the workspace."}, {"start_s": 794.249, "end_s": 814.249, "action": "Remained idle in SketchUp with the imported floor-plan geometry displayed.", "intent": "Pause while reviewing the imported model.", "app": "SketchUp 2024", "details": null}, {"start_s": 814.249, "end_s": 824.023, "action": "Scrolled and middle-clicked around the SketchUp workspace while viewing several 2D floor-plan drawings; the camera view shifted slightly across the layouts.", "intent": "Navigate and inspect the floor-plan drawings.", "app": "SketchUp 2024", "details": null}, {"start_s": 824.023, "end_s": 843.739, "action": "Scrolled repeatedly to zoom and reposition the SketchUp camera, bringing the central floor-plan layouts closer into view.", "intent": "Inspect the floor-plan geometry at a closer scale.", "app": "SketchUp 2024", "details": null}, {"start_s": 843.739, "end_s": 854.528, "action": "Continued scrolling to adjust the camera view while reviewing the arrangement of multiple floor-plan drawings.", "intent": "Continue navigating the model for visual inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 854.528, "end_s": 864.098, "action": "Scrolled and middle-clicked within the central floor-plan area, shifting the view and enlarging the surrounding layouts.", "intent": "Pan and zoom around the floor-plan geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 864.098, "end_s": 874.272, "action": "Scrolled extensively to zoom out and view the full set of floor-plan drawings, then clicked and dragged near the left toolbar, leaving a measurement-related tool selected.", "intent": "Review the overall layout and switch tools for a subsequent operation.", "app": "SketchUp 2024", "details": "The toolbar state and status bar indicate a dimension/measurement tool was selected."}, {"start_s": 874.272, "end_s": 884.423, "action": "Scrolled and clicked a floor-plan edge, then entered a space and continued navigating; the view zoomed into one layout and displayed a temporary linear dimension of 7 2/7/16 inches before zooming back out.", "intent": "Measure or initiate a linear dimension on the selected floor-plan geometry.", "app": "SketchUp 2024", "details": "The status bar showed \u201cSelect second point for linear dimension,\u201d and the temporary dimension label was visible."}, {"start_s": 884.423, "end_s": 894.84, "action": "Scrolled through the SketchUp plan, clicked and dragged on a room edge, and left the Linear Dimension tool active with a dimension preview visible.", "intent": "Measure a segment of the floor-plan geometry.", "app": "SketchUp 2024", "details": "The view zoomed from multiple plan layouts into one room, showing a dimension preview near the right edge."}, {"start_s": 894.84, "end_s": 905.959, "action": "Pressed Space, navigated the view with scrolling, then clicked and dragged to return to selection mode and zoomed back out to multiple plan layouts.", "intent": "Inspect the plan and exit the active dimension operation.", "app": "SketchUp 2024", "details": "The status bar changed to object selection, and the dimension preview was no longer visible."}, {"start_s": 905.959, "end_s": 916.784, "action": "Scrolled slightly, clicked the lower-right plan, and pressed Space to finish the interaction, leaving the plan layouts visible without an active dimension preview.", "intent": "Inspect another floor-plan layout.", "app": "SketchUp 2024", "details": "The lower-right layout was briefly targeted; the final view showed several plan drawings."}, {"start_s": 916.784, "end_s": 925.201, "action": "Clicked and dragged to activate the dimension tool, scrolled to zoom into a room edge, and clicked twice on the edge to begin a measurement.", "intent": "Measure the vertical segment along the room perimeter.", "app": "SketchUp 2024", "details": "A dimension preview appeared on the right-side edge, labeled approximately 3 feet 4 inches."}, {"start_s": 925.201, "end_s": 934.929, "action": "Pressed Space, zoomed further into the measured edge, and clicked to place the second dimension point.", "intent": "Complete or refine the measurement of the room edge.", "app": "SketchUp 2024", "details": "The close-up showed a dimension preview of approximately 4 feet 1 1/2 inches while the tool awaited the second point."}, {"start_s": 934.929, "end_s": 942.649, "action": "Pressed Space, scrolled and used middle-click navigation to zoom back out across the plan layouts; the application briefly became unhidden, then the view ended on a blank area with only the axes visible.", "intent": "Navigate away from the measured area and review the drawing at a wider scale.", "app": "SketchUp 2024", "details": "The final screenshot showed an empty gray modeling canvas with the green axis line."}, {"start_s": 942.649, "end_s": 951.703, "action": "Returned to SketchUp and navigated the camera around several 2D floor-plan layouts using middle-clicks and scroll gestures, ending on a closer view of the plans.", "intent": "Inspect different floor-plan layouts and adjust the view.", "app": "SketchUp 2024", "details": null}, {"start_s": 951.703, "end_s": 963.345, "action": "Zoomed and panned across the floor-plan drawings, moving from a group view to a close inspection of one kitchen-like layout with appliance symbols and surrounding fixtures.", "intent": "Examine details within a selected floor-plan layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 963.345, "end_s": 982.225, "action": "Adjusted the SketchUp view with repeated scroll gestures, alternating between wider and closer views of multiple floor-plan layouts.", "intent": "Review the arrangement and details of the modeled plans.", "app": "SketchUp 2024", "details": null}, {"start_s": 982.225, "end_s": 994.473, "action": "Entered isolated keystrokes while navigating, activated the line tool, and zoomed toward the upper edge of a floor-plan layout without completing a clearly visible new line.", "intent": "Prepare to draw or inspect geometry in the floor plan.", "app": "SketchUp 2024", "details": "The line tool remained active near the end of the span."}, {"start_s": 994.473, "end_s": 1004.799, "action": "Activated the line tool, clicked and dragged around the upper-left area of the close-up plan, then clicked along the upper interior edge to create or position line geometry while zooming the view.", "intent": "Add or refine linear geometry along the floor-plan boundary.", "app": "SketchUp 2024", "details": "The view shows newly highlighted/white plan faces and an active line endpoint."}, {"start_s": 1004.799, "end_s": 1014.169, "action": "Zoomed and panned across the plan, clicked the upper-right interior area to draw a rectangular section, then clicked another point and left the drawing tool active.", "intent": "Continue subdividing the floor-plan geometry with rectangular sections.", "app": "SketchUp 2024", "details": "A rectangular area on the right side is visibly selected or being drawn, with dimensions shown in the status area."}, {"start_s": 1014.169, "end_s": 1023.465, "action": "Scrolled over the SketchUp model and clicked repeatedly across the top and right faces, leaving the connected faces selected with stippled highlighting.", "intent": "Select connected model faces for further editing.", "app": "SketchUp", "details": null}, {"start_s": 1023.465, "end_s": 1033.488, "action": "Clicked repeatedly on the selected right-side face while the view remained zoomed out, keeping the connected face selection active.", "intent": "Refine or maintain the face selection.", "app": "SketchUp", "details": null}, {"start_s": 1033.488, "end_s": 1043.511, "action": "Clicked model faces, opened the context menu, then dismissed it and dragged across the model to select the surrounding geometry.", "intent": "Access face-editing commands and adjust the geometry selection.", "app": "SketchUp", "details": "The context menu visibly included Entity Info, Erase, Hide, Make Group, Intersect Faces, Weld Edges, and other editing commands."}, {"start_s": 1043.511, "end_s": 1053.194, "action": "Typed P, clicked the selected face, and used the Push/Pull tool to extrude the connected top and right faces into raised walls; entered 100 as the distance value.", "intent": "Create a three-dimensional wall extrusion from the selected faces.", "app": "SketchUp", "details": "The model changed from flat faces to a U-shaped raised extrusion."}, {"start_s": 1053.194, "end_s": 1064.041, "action": "Entered and confirmed MM, clicked and manipulated the extruded geometry, then orbited and zoomed the view to inspect the resulting walls from lower angles.", "intent": "Set or confirm a measurement-related value and review the extrusion.", "app": "SketchUp", "details": "The final view showed the raised U-shaped wall structure in perspective."}, {"start_s": 1064.041, "end_s": 1073.872, "action": "Orbited and zoomed out repeatedly, moving from a close inspection of the extrusion to a wider view showing several floor-plan models and a standing scale figure.", "intent": "Review the edited model in the broader scene.", "app": "SketchUp", "details": null}, {"start_s": 1073.872, "end_s": 1086.145, "action": "Clicked in the SketchUp workspace and repeatedly scrolled to adjust the view across several floor-plan drawings.", "intent": "Navigate and inspect the modeled floor plans.", "app": "SketchUp 2024", "details": null}, {"start_s": 1086.145, "end_s": 1096.034, "action": "Scrolled through the SketchUp workspace, changing the zoom and framing of the floor-plan drawings.", "intent": "Review different areas of the floor-plan layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 1096.034, "end_s": 1104.68, "action": "Selected the upper-left floor-plan group, opened its context menu, then dismissed the menu and hid the SketchUp window.", "intent": "Inspect or manage the selected floor-plan object.", "app": "SketchUp 2024", "details": "The context menu displayed options including Entity Info, Erase, Hide, Lock, and Edit Group."}, {"start_s": 1104.68, "end_s": 1111.196, "action": "Scrolled and clicked within the floor-plan workspace, then typed \u201cR\u201d; the view zoomed toward a lower floor plan and activated a drawing tool.", "intent": "Navigate to and begin editing the lower floor-plan drawing.", "app": "SketchUp 2024", "details": "The status bar indicated a first-corner drawing operation near the end of the span."}, {"start_s": 1111.196, "end_s": 1131.196, "action": "Remained idle in SketchUp with the drawing tool active while viewing the zoomed lower floor plan.", "intent": "Pause while reviewing the current drawing view.", "app": "SketchUp 2024", "details": null}, {"start_s": 1131.196, "end_s": 1141.778, "action": "Scrolled extensively to zoom out and reposition the SketchUp workspace, then typed a space character.", "intent": "Review the overall arrangement of the floor-plan drawings.", "app": "SketchUp 2024", "details": null}, {"start_s": 1141.778, "end_s": 1148.386, "action": "Scrolled through the SketchUp workspace, shifting the view across several outlined floor-plan drawings.", "intent": "Review the modeled floor plans.", "app": "SketchUp 2024", "details": null}, {"start_s": 1148.386, "end_s": 1161.241, "action": "Scrolled and zoomed the SketchUp view until one subdivided floor-plan layout was shown prominently.", "intent": "Inspect a specific floor-plan layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 1161.241, "end_s": 1170.351, "action": "Typed R and interacted with the right side of the plan, creating or adjusting a rectangular outline; the resulting geometry remained active for further drawing.", "intent": "Modify the right-side geometry of the floor plan.", "app": "SketchUp 2024", "details": "A rectangular outline on the right side was selected or adjusted, with dimensions shown in the status area."}, {"start_s": 1170.351, "end_s": 1180.352, "action": "Selected the right-side group of faces, adjusted it with the drawing tool, and left the connected region highlighted in blue.", "intent": "Select and refine the right-side plan geometry.", "app": "SketchUp 2024", "details": "The right-side faces were visibly selected, then the SketchUp window was hidden at the end of the span."}, {"start_s": 1180.352, "end_s": 1193.41, "action": "Selected the right-side geometry, activated Push/Pull, and entered 700, producing a raised rectangular block from that portion of the floor plan.", "intent": "Extrude the selected plan area into a 3D volume.", "app": "SketchUp 2024", "details": "The Push/Pull operation was active and the entered distance was 700."}, {"start_s": 1193.41, "end_s": 1203.384, "action": "Entered MM and confirmed, then orbited the camera and adjusted the raised block; the final view showed the white rectangular volume selected above the floor plan.", "intent": "Set the extrusion measurement and inspect the resulting 3D form.", "app": "SketchUp 2024", "details": "The final perspective view showed a raised rectangular block with its edges highlighted blue."}, {"start_s": 1203.384, "end_s": 1211.21, "action": "Typed into the active SketchUp operation, clicked and dragged the selected rectangular block, then scrolled and clicked in the model area; left the block selected in a wider view.", "intent": "Adjust or reposition the selected model block among the floor-plan drawings.", "app": "SketchUp 2024", "details": null}, {"start_s": 1211.21, "end_s": 1221.514, "action": "Clicked the selected block and used the Rotate tool, dragging it to change its orientation; briefly resized or moved an Explorer window and returned to SketchUp.", "intent": "Rotate the selected block in the model.", "app": "SketchUp 2024", "details": "The Rotate tool showed an angle of about 54.2 degrees."}, {"start_s": 1221.514, "end_s": 1231.69, "action": "Clicked and dragged the block again with the Rotate tool, changing its orientation and leaving it selected; pressed Escape during the operation.", "intent": "Continue refining the block's rotation.", "app": "SketchUp 2024", "details": "The block remained selected with the rotation gizmo visible."}, {"start_s": 1231.69, "end_s": 1242.545, "action": "Clicked the selected block and nearby model area to begin another rotation operation, then pressed Escape while the Rotate tool remained active.", "intent": "Prepare or adjust another rotation of the block.", "app": "SketchUp 2024", "details": "The rotation protractor moved from the block toward the adjacent floor-plan drawing."}, {"start_s": 1242.545, "end_s": 1252.569, "action": "Clicked the block and model area repeatedly with the Rotate tool, rotated the block to a different angled orientation, then pressed Escape and issued an undo command.", "intent": "Refine the block orientation and potentially revert the latest rotation.", "app": "SketchUp 2024", "details": "The visible rotation angle reached about 36.2 degrees before the operation was canceled or undone."}, {"start_s": 1252.569, "end_s": 1262.44, "action": "Scrolled and middle-clicked to navigate the SketchUp view, zooming or orbiting closer to the block and adjacent floor plan; clicked the block to select it and set up another rotation.", "intent": "Inspect the block more closely and prepare another orientation adjustment.", "app": "SketchUp 2024", "details": "The final view was zoomed in, with the block selected and the Rotate tool active."}, {"start_s": 1262.44, "end_s": 1271.066, "action": "Resized and repositioned the SketchUp window, dismissed the active input, and scrolled the model view to inspect the selected box among the surrounding floor-plan outlines.", "intent": "Adjust the workspace and inspect the model from a wider view.", "app": "SketchUp 2024", "details": "The Rotate tool remained active on the selected box/group."}, {"start_s": 1271.066, "end_s": 1279.087, "action": "Clicked the lower corner of the selected box/group twice to set the rotation center, leaving the Rotate tool ready for the next point.", "intent": "Set the rotation center for the selected group.", "app": "SketchUp 2024", "details": "The tooltip identified the point as \u201cOrigin in Group.\u201d"}, {"start_s": 1279.087, "end_s": 1289.695, "action": "Dragged across the selected box/group and repeatedly clicked near its upper-right corner, then clicked the lower corner to define the rotation direction.", "intent": "Define the rotation axis and start point for rotating the group.", "app": "SketchUp 2024", "details": "The selected geometry remained outlined in blue while the Rotate tool was active."}, {"start_s": 1289.695, "end_s": 1297.786, "action": "Clicked the lower corner and rotated the selected box/group slightly, reaching an angle of about 8.6 degrees before completing the transformation.", "intent": "Apply a small rotation to the selected group.", "app": "SketchUp 2024", "details": "The rotation preview showed the box tilted and the Angle field displayed 8.6."}, {"start_s": 1297.786, "end_s": 1308.201, "action": "Selected the Rotate tool again, set the rotation center on the box, and began another rotation by clicking and dragging toward the right corner.", "intent": "Adjust the group\u2019s orientation with another rotation operation.", "app": "SketchUp 2024", "details": "The Angle field showed approximately 2.8 degrees during the active rotation."}, {"start_s": 1308.201, "end_s": 1317.423, "action": "Clicked the right corner of the selected box/group to set the rotation center, then moved to begin another rotation without completing it.", "intent": "Prepare another rotation adjustment of the selected group.", "app": "SketchUp 2024", "details": "The tooltip identified the target as \u201cCorner of Group,\u201d and the Rotate tool remained active."}, {"start_s": 1317.423, "end_s": 1327.448, "action": "Clicked the selected object and adjusted the view with brief scrolling, leaving the rotation tool active on the rectangular model.", "intent": "Position and prepare the object for rotation.", "app": "SketchUp 2024", "details": "The rectangular solid remained selected with a rotation protractor visible."}, {"start_s": 1327.448, "end_s": 1337.873, "action": "Started rotating the selected rectangular solid, entered a rotation value, and repositioned it through multiple clicks; the object briefly tilted before returning to an aligned orientation.", "intent": "Rotate the rectangular solid to a desired orientation.", "app": "SketchUp 2024", "details": "The rotation field visibly showed 42.5 during the operation."}, {"start_s": 1337.873, "end_s": 1348.837, "action": "Continued rotating the selected solid and then canceled or exited the active rotation state; the view remained on the model while the window was moved or resized near the end.", "intent": "Finish the rotation adjustment and return to object editing.", "app": "SketchUp 2024", "details": "The solid ended aligned in the scene with no rotation protractor visible in the final view."}, {"start_s": 1348.837, "end_s": 1357.734, "action": "Reactivated the rotation tool on the selected rectangular solid and clicked around the object to set or adjust the rotation center.", "intent": "Prepare another rotation adjustment.", "app": "SketchUp 2024", "details": "The green rotation protractor remained centered near the solid."}, {"start_s": 1357.734, "end_s": 1366.302, "action": "Exited the rotation setup, zoomed or orbited the view using middle-button interactions and scrolling, and left the rectangular solid selected in a wider scene view.", "intent": "Review the object in relation to the surrounding floor-plan geometry.", "app": "SketchUp 2024", "details": "The final view showed the selected solid among several surrounding plan outlines."}, {"start_s": 1366.302, "end_s": 1378.433, "action": "Activated rotation on the selected solid and adjusted its orientation, leaving the object tilted with the rotation protractor visible.", "intent": "Rotate the rectangular solid to a new angle.", "app": "SketchUp 2024", "details": "The final screenshot showed the solid selected in a slightly rotated orientation."}, {"start_s": 1378.433, "end_s": 1388.336, "action": "Clicked the selected rectangular solid\u2019s rotation handle and adjusted its orientation, leaving the object selected in SketchUp.", "intent": "Rotate the modeled rectangular object.", "app": "SketchUp 2024", "details": null}, {"start_s": 1388.336, "end_s": 1397.822, "action": "Zoomed or scrolled the SketchUp view, entered rotation-related keyboard input, and clicked the object\u2019s rotation handle to continue adjusting its orientation.", "intent": "Continue rotating and positioning the modeled object.", "app": "SketchUp 2024", "details": null}, {"start_s": 1397.822, "end_s": 1411.882, "action": "Clicked the rotation handle and rotated the selected solid to an approximately 15-degree orientation, then returned the angle readout to 0.0.", "intent": "Refine the object\u2019s rotation angle.", "app": "SketchUp 2024", "details": "The selected rectangular solid remained centered among the floor-plan outlines."}, {"start_s": 1411.882, "end_s": 1422.518, "action": "Entered rotation-related keyboard input, clicked the rotation center and handle, and adjusted the selected solid\u2019s orientation before leaving it selected.", "intent": "Continue manipulating the object\u2019s rotation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1422.518, "end_s": 1432.769, "action": "Exited the rotation interaction, selected the solid with the Select tool, then used middle-mouse navigation and scrolling to change the camera view and zoom.", "intent": "Finish the object adjustment and inspect it from a different view.", "app": "SketchUp 2024", "details": null}, {"start_s": 1432.769, "end_s": 1442.824, "action": "Used repeated middle-mouse orbit and scroll gestures to orbit and zoom around the selected rectangular solid and surrounding floor-plan drawings, ending on a closer top-down view.", "intent": "Inspect the modeled object and surrounding layout from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 1442.824, "end_s": 1460.206, "action": "Typed briefly, then clicked the selected rectangular prism to position the Rotate tool; SketchUp indicated a locked rotation plane.", "intent": "Prepare the prism for rotation.", "app": "SketchUp 2024", "details": "The prism remained selected among several floor-plan outlines."}, {"start_s": 1460.206, "end_s": 1470.558, "action": "Clicked the prism\u2019s lower area and rotated it through a near-vertical orientation, with the Angle field showing 87.0 and later 270.0 degrees.", "intent": "Rotate the selected prism around its constrained axis.", "app": "SketchUp 2024", "details": "The Rotate tool remained active and the rotation protractor was visible."}, {"start_s": 1470.558, "end_s": 1481.238, "action": "Dragged with the middle mouse button to orbit the 3D view, changing to a wider perspective around the selected prism and floor plans.", "intent": "Inspect the rotated prism from different viewpoints.", "app": "SketchUp 2024", "details": "The SketchUp window was resized during the orbiting sequence."}, {"start_s": 1481.238, "end_s": 1491.982, "action": "Clicked the prism and rotated it substantially, briefly typing while the Rotate tool remained active; the prism changed from a horizontal pose to a more upright angled pose.", "intent": "Continue adjusting the prism\u2019s orientation.", "app": "SketchUp 2024", "details": "The Angle field showed approximately 82.4 during the rotation."}, {"start_s": 1491.982, "end_s": 1502.11, "action": "Typed briefly, clicked the prism, and switched back to selection, leaving the prism upright and showing an \u201cUnlocked plane\u201d tooltip before reactivating rotation.", "intent": "Conclude the rotation adjustment and inspect the resulting object.", "app": "SketchUp 2024", "details": "The prism stayed selected in the perspective view."}, {"start_s": 1502.11, "end_s": 1522.11, "action": "Clicked the selected prism and continued rotating it; by the end, it had moved from an upright orientation to a broad horizontal orientation while remaining selected.", "intent": "Further rotate the prism to a new final orientation.", "app": "SketchUp 2024", "details": "The Rotate protractor and Angle field remained visible, with the final view showing an angle of 81.8."}, {"start_s": 1522.11, "end_s": 1531.646, "action": "Selected the rectangular box and activated the Rotate tool, positioning the rotation protractor around the object before clicking to set a rotation point.", "intent": "Prepare the box for rotation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1531.646, "end_s": 1539.528, "action": "Rotated the selected box to approximately 15 degrees, then completed the operation and left the box selected.", "intent": "Adjust the box orientation.", "app": "SketchUp 2024", "details": "A Windows Explorer resize event occurred during the span."}, {"start_s": 1539.528, "end_s": 1551.526, "action": "Reactivated Rotate on the selected box and positioned the rotation protractor at its lower edge, setting a rotation point for another adjustment.", "intent": "Prepare a second rotation of the box.", "app": "SketchUp 2024", "details": null}, {"start_s": 1551.526, "end_s": 1561.998, "action": "Exited the active rotation state, reselected the box, and activated Rotate again at its lower-left area.", "intent": "Continue adjusting the box orientation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1561.998, "end_s": 1571.831, "action": "Dragged the rotation handle to tilt the selected box, briefly reaching about 19.4 degrees, then repositioned the rotation tool near the adjacent floor-plan drawing.", "intent": "Rotate the box in the modeling workspace.", "app": "SketchUp 2024", "details": null}, {"start_s": 1571.831, "end_s": 1582.2, "action": "Dragged the rotation handle again and tilted the selected box to approximately 22.9 degrees.", "intent": "Further refine the box orientation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1582.2, "end_s": 1588.985, "action": "Scrolled without a visible view change, pressed Q, and left the rectangular block selected with the Rotate tool active.", "intent": "Prepare the selected block for rotation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1588.985, "end_s": 1599.246, "action": "Clicked repeatedly near the selected block\u2019s lower-left area, positioning the Rotate tool\u2019s center and start point.", "intent": "Set up a rotation of the selected block.", "app": "SketchUp 2024", "details": null}, {"start_s": 1599.246, "end_s": 1613.198, "action": "Pressed Space, then scrolled and middle-clicked to orbit the view; the selected block remained visible among the surrounding plan drawings.", "intent": "Inspect the model from a different view while keeping the block selected.", "app": "SketchUp 2024", "details": null}, {"start_s": 1613.198, "end_s": 1623.014, "action": "Scrolled and middle-clicked to adjust the view, pressed Q, then clicked near the block to position the Rotate tool; the view zoomed closer to the block.", "intent": "Prepare a closer rotation view for the selected block.", "app": "SketchUp 2024", "details": null}, {"start_s": 1623.014, "end_s": 1633.432, "action": "Clicked repeatedly near the block\u2019s lower-right corner and pressed Space; the block remained selected with the rotation protractor visible.", "intent": "Set the rotation start point for the selected block.", "app": "SketchUp 2024", "details": null}, {"start_s": 1633.432, "end_s": 1643.846, "action": "Pressed Q and clicked around the block\u2019s lower-left and lower-right edges, leaving the Rotate tool active with a rotation guide spanning the block\u2019s base.", "intent": "Continue positioning the rotation for the selected block.", "app": "SketchUp 2024", "details": null}, {"start_s": 1643.846, "end_s": 1655.068, "action": "Selected the rectangular block and activated the Rotate tool, positioning the rotation center near its right edge.", "intent": "Prepare the block for rotation.", "app": "SketchUp 2024", "details": null}, {"start_s": 1655.068, "end_s": 1665.869, "action": "Clicked repeatedly near the block\u2019s left edge to position and adjust the Rotate tool\u2019s start point while keeping the block selected.", "intent": "Set the rotation start point for the selected block.", "app": "SketchUp 2024", "details": null}, {"start_s": 1665.869, "end_s": 1680.424, "action": "Continued positioning the Rotate tool around the selected block, clicking near its left edge and then its right edge to define the rotation reference.", "intent": "Define the rotation axis and reference points.", "app": "SketchUp 2024", "details": null}, {"start_s": 1680.424, "end_s": 1689.587, "action": "Used middle-click navigation to adjust the view, then activated Rotate and repositioned the rotation handle toward the block\u2019s upper-right area.", "intent": "Orient the view and prepare another rotation adjustment.", "app": "SketchUp 2024", "details": null}, {"start_s": 1689.587, "end_s": 1701.349, "action": "Rotated the selected block substantially, with the angle readout reaching 95.4 degrees, then scrolled to zoom or navigate the model while the rotation tool remained active.", "intent": "Rotate the block into a new orientation and inspect its placement.", "app": "SketchUp 2024", "details": "The block became tall and nearly vertical relative to the surrounding floor-plan drawings."}, {"start_s": 1701.349, "end_s": 1710.98, "action": "Clicked to complete the rotation, exited to the Select tool, and navigated the view with middle-click and scroll gestures to zoom out and inspect the rotated block among the floor plans.", "intent": "Finalize the block orientation and review the overall model layout.", "app": "SketchUp 2024", "details": "The final view showed the selected vertical block positioned among several plan-like outlines."}, {"start_s": 1710.98, "end_s": 1721.1, "action": "Activated the Rotate tool and rotated the selected rectangular group, changing it from an upright orientation to a flatter angled position.", "intent": "Adjust the orientation of the selected 3D group.", "app": "SketchUp 2024", "details": "The Angle field showed 101.0 at the end of the span."}, {"start_s": 1721.1, "end_s": 1732.027, "action": "Continued rotating the selected rectangular group and changed its orientation through approximately 30\u00b0 and then 90\u00b0 states.", "intent": "Refine the selected group's rotation.", "app": "SketchUp 2024", "details": "The group remained selected with the Rotate protractor visible."}, {"start_s": 1732.027, "end_s": 1741.163, "action": "Repositioned the Rotate tool around a corner of the selected group and rotated the rectangular group to a nearly horizontal orientation.", "intent": "Set a new rotation axis and orientation for the group.", "app": "SketchUp 2024", "details": "The Rotate tool displayed a corner-of-group tooltip and an angle of about 138.8\u00b0."}, {"start_s": 1741.163, "end_s": 1750.733, "action": "Exited the active rotation interaction, then reactivated Rotate on the selected rectangular group and positioned the rotation protractor on its left side.", "intent": "Prepare another rotation adjustment of the selected group.", "app": "SketchUp 2024", "details": "The selection remained highlighted and the Rotate tool was active at the end."}, {"start_s": 1750.733, "end_s": 1760.878, "action": "Rotated the selected rectangular group substantially, changing it to a larger tilted orientation while keeping the Rotate tool active.", "intent": "Further adjust the group's 3D orientation.", "app": "SketchUp 2024", "details": "The Angle field showed approximately 129.5\u00b0."}, {"start_s": 1760.878, "end_s": 1770.427, "action": "Continued rotating the selected group, then zoomed the view out with a scroll burst to show more floor-plan geometry.", "intent": "Finalize the rotation while reviewing the group's placement in the broader model.", "app": "SketchUp 2024", "details": "The final view was zoomed out and showed the selected group among several plan drawings."}, {"start_s": 1770.427, "end_s": 1780.18, "action": "Navigated around the SketchUp model with clicks and scrolls, then selected the freestanding rectangular block.", "intent": "Inspect and position the 3D model view.", "app": "SketchUp 2024", "details": "Several floor-plan layouts and the selected block were visible."}, {"start_s": 1780.18, "end_s": 1788.46, "action": "Activated the Rotate tool on the selected rectangular block and positioned the rotation center, leaving the rotation gizmo active.", "intent": "Prepare to rotate the selected block.", "app": "SketchUp 2024", "details": "The block remained selected with the rotation protractor visible."}, {"start_s": 1788.46, "end_s": 1798.493, "action": "Rotated the selected block while zooming and panning around the model, ending with the block upright and the rotation angle shown as 210 degrees.", "intent": "Adjust the block's orientation in the model.", "app": "SketchUp 2024", "details": "The rotation operation remained active briefly before the block appeared in a narrow upright orientation."}, {"start_s": 1798.493, "end_s": 1806.491, "action": "Zoomed and orbited around the SketchUp scene, changing from a distant overview to a closer view of the upright rectangular block among the floor plans.", "intent": "Review the block placement and surrounding model geometry.", "app": "SketchUp 2024", "details": "The block was shown upright without selection highlighting in the final view."}, {"start_s": 1806.491, "end_s": 1817.134, "action": "Selected the Dimension tool and zoomed toward the floor-plan geometry near the block.", "intent": "Prepare to measure a distance in the model.", "app": "SketchUp 2024", "details": "The Dimension tool was active and the view moved closer to the plans."}, {"start_s": 1817.134, "end_s": 1830.077, "action": "Picked two points along the lower edge of the right-side floor plan and placed a linear dimension reading 5' 1\".", "intent": "Measure the length of the selected floor-plan edge.", "app": "SketchUp 2024", "details": "The dimension annotation remained visible below the plan."}, {"start_s": 1830.077, "end_s": 1839.043, "action": "Scrolled through the SketchUp model, clicked within the drawing area, and changed the active tool or selection state while viewing multiple floor-plan outlines and a small 3D block.", "intent": "Inspect the model and navigate its geometry.", "app": "SketchUp", "details": null}, {"start_s": 1839.043, "end_s": 1850.335, "action": "Zoomed and positioned the view, placed a linear dimension showing approximately 1' 0 13/16\", then opened the Window menu and selected Model Info.", "intent": "Measure model geometry and open model settings.", "app": "SketchUp", "details": "The Model Info command was selected from the Window menu."}, {"start_s": 1850.335, "end_s": 1860.714, "action": "Opened Model Info on the Units page and changed the measurement format from Architectural to Decimal, leaving the length units set to Inches.", "intent": "Configure measurement display units.", "app": "SketchUp", "details": "The Units panel visibly shows Decimal format, Inches length units, and four-decimal precision."}, {"start_s": 1860.714, "end_s": 1875.514, "action": "Changed the Units length setting from Inches to Millimeters and adjusted the display precision and snapping controls, then moved to close the Model Info dialog.", "intent": "Configure metric measurement settings for the model.", "app": "SketchUp", "details": "The Units panel shows Millimeters, 0.00 mm display precision, and 0.01 mm length snapping."}, {"start_s": 1875.514, "end_s": 1884.9, "action": "Returned to the model, navigated to the geometry, and began placing a linear dimension; the dimension preview displayed 728.00 mm while the tool awaited the second point.", "intent": "Measure a model edge using the configured metric units.", "app": "SketchUp", "details": "The status bar indicates that the second point for the linear dimension is being selected."}, {"start_s": 1884.9, "end_s": 1895.258, "action": "Scrolled and orbited around the SketchUp model, moving from an overview of the floor plans to a close view of the 3D rectangular block, with additional clicks near the object.", "intent": "Inspect the model in 3D and adjust the camera view.", "app": "SketchUp", "details": null}, {"start_s": 1895.258, "end_s": 1907.308, "action": "Clicked the selected face twice, then entered a cancel keystroke and space; the face was pushed or pulled into a rectangular prism.", "intent": "Create or adjust the 3D extrusion.", "app": "SketchUp 2024", "details": "The resulting prism is visible beside the floor-plan lines."}, {"start_s": 1907.308, "end_s": 1916.78, "action": "Selected the dimension tool, navigated around the prism with clicks, drags, and scroll input, then clicked points on the model to begin a measurement.", "intent": "Start measuring the model geometry.", "app": "SketchUp 2024", "details": "The status bar shows the dimension tool waiting for the second point, with a temporary measurement visible."}, {"start_s": 1916.78, "end_s": 1928.581, "action": "Entered a space keystroke and scrolled to reposition the view while reviewing the prism and surrounding plan geometry.", "intent": "Inspect the model and adjust the viewport.", "app": "SketchUp 2024", "details": "No confirmed geometry edit occurred during this interval."}, {"start_s": 1928.581, "end_s": 1938.41, "action": "Activated Push/Pull, clicked the prism face, entered 120, and confirmed with MM and Enter; then scrolled and repositioned the view.", "intent": "Set the selected face's extrusion distance to 120 mm.", "app": "SketchUp 2024", "details": "The Push/Pull distance field visibly shows 120, and the prism remains upright in the wider model view."}, {"start_s": 1938.41, "end_s": 1946.193, "action": "Used the dimension tool to select points along the prism's lower edge, adjusted the view with scroll input, and placed a dimension showing 700.00 mm.", "intent": "Measure the prism's lower edge.", "app": "SketchUp 2024", "details": "The dimension annotation is visible between the two selected lower vertices."}, {"start_s": 1946.193, "end_s": 1954.651, "action": "Scrolled and zoomed around the prism while the dimension tool remained active, changing the displayed measurement to 579.99 mm, then entered a space keystroke and left the view focused on the prism.", "intent": "Review the measured geometry from a closer view.", "app": "SketchUp 2024", "details": "The final screenshot shows the prism close-up with no additional confirmed edit."}, {"start_s": 1954.651, "end_s": 1963.601, "action": "Scrolled around the SketchUp model, selected the upright rectangular component, typed \u201cM,\u201d and began moving it; the Distance field showed 990.91 mm.", "intent": "Position the upright component within the architectural model.", "app": "SketchUp 2024", "details": "Multiple floor-plan layouts were visible, and the selected component was highlighted in blue."}, {"start_s": 1963.601, "end_s": 1973.753, "action": "Navigated the 3D view with scroll and middle-click orbiting, then selected the upright component and adjusted the viewpoint around it.", "intent": "Inspect and reposition the upright component relative to the surrounding floor plans.", "app": "SketchUp 2024", "details": "The component remained selected while the view changed from a close-up to a wider oblique view."}, {"start_s": 1973.753, "end_s": 1984.153, "action": "Orbited and zoomed around the selected component, typed \u201cM,\u201d then clicked and dragged near its lower corner to initiate a move; the Distance field later showed 15.00 mm.", "intent": "Fine-tune the component\u2019s placement at its base.", "app": "SketchUp 2024", "details": "The view became an extreme close-up of the component\u2019s lower edge and corner."}, {"start_s": 1984.153, "end_s": 1994.439, "action": "Dragged the selected component near its lower edge and continued orbiting and zooming around it, ending with a wider view of the component among the floor-plan layouts.", "intent": "Continue inspecting and adjusting the component\u2019s position.", "app": "SketchUp 2024", "details": "The component remained outlined in blue and the move tool status was visible."}, {"start_s": 1994.439, "end_s": 2005.675, "action": "Orbited and zoomed through the model, moving between wide views of multiple floor plans and close-ups of the selected upright component.", "intent": "Review the component\u2019s placement from different viewpoints.", "app": "SketchUp 2024", "details": "The selected component stayed highlighted while the camera changed substantially."}, {"start_s": 2005.675, "end_s": 2016.179, "action": "Clicked and orbited around the selected component, then used the move tool and zoomed closer; typed a space and two control-character inputs while the component remained selected.", "intent": "Continue manipulating and inspecting the selected component.", "app": "SketchUp 2024", "details": "The final close-up showed the component\u2019s lower corner and a Distance value of 43.36 mm."}, {"start_s": 2016.179, "end_s": 2027.435, "action": "Navigated around the SketchUp model with repeated zooming and middle-button view adjustments, then clicked the central rectangular solid and changed the view to inspect the surrounding floor-plan linework.", "intent": "Inspect the model layout and central object from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 2027.435, "end_s": 2037.371, "action": "Continued orbiting and zooming around the SketchUp scene, moving from an overview of multiple floor plans to closer views of the plan drawings; pressed R near the end of the interval.", "intent": "Review the floor-plan drawings and adjust the modeling view.", "app": "SketchUp 2024", "details": null}, {"start_s": 2037.371, "end_s": 2047.409, "action": "Zoomed and repositioned the view across the floor plans, pressed the spacebar, and clicked drawing-tool controls on the left toolbar, leaving a drawing tool active over the plan geometry.", "intent": "Prepare to work with or inspect plan geometry using a SketchUp drawing tool.", "app": "SketchUp 2024", "details": null}, {"start_s": 2047.409, "end_s": 2057.059, "action": "Zoomed into a floor-plan area and selected endpoints with the linear dimension tool, producing a visible 1550.00 mm measurement; repositioned the view while leaving the dimension placement in progress.", "intent": "Measure a distance between points in the floor-plan drawing.", "app": "SketchUp 2024", "details": "The status bar showed \u201cSelect second point for linear dimension\u201d and later \u201cPlace the dimension.\u201d"}, {"start_s": 2057.059, "end_s": 2067.481, "action": "Pressed the spacebar, reselected the dimension tool, zoomed and navigated across the model, then clicked points on a floor plan to begin another measurement; a dimension preview appeared near the selected geometry.", "intent": "Continue measuring distances in the floor-plan model.", "app": "SketchUp 2024", "details": "The final view showed the linear dimension tool awaiting the second point."}, {"start_s": 2067.481, "end_s": 2075.917, "action": "Kept the linear dimension operation active and zoomed out to review the measured floor plan; the displayed measurement changed as the view and cursor position were adjusted.", "intent": "Inspect and position the in-progress dimension on the floor plan.", "app": "SketchUp 2024", "details": "Visible measurement labels included approximately 2048.64 mm and 2101.74 mm."}, {"start_s": 2075.917, "end_s": 2086.289, "action": "Scrolled through the SketchUp scene, then clicked to activate a measurement tool and began selecting points on the lower floor-plan drawing.", "intent": "Inspect the modeled floor plans and start measuring geometry.", "app": "SketchUp 2024", "details": "The view changed from multiple floor plans to a close-up of one plan with a measurement marker."}, {"start_s": 2086.289, "end_s": 2096.875, "action": "Scrolled across the scene and pressed R, leaving the view on the group of floor-plan drawings with a drawing tool active near the lower plan.", "intent": "Navigate the model and prepare another drawing or measurement operation.", "app": "SketchUp 2024", "details": "No completed geometry change is clearly visible during the span."}, {"start_s": 2096.875, "end_s": 2105.841, "action": "Clicked and dragged on the lower central floor plan, then scrolled and repeated a drag near the right side, creating or positioning rectangular geometry on the plan.", "intent": "Add or adjust rectangular geometry within the floor-plan model.", "app": "SketchUp 2024", "details": "The active tool displayed rectangle dimensions, including 467.09 mm and later 1550.00 mm by 2040.00 mm."}, {"start_s": 2105.841, "end_s": 2115.521, "action": "Paused over the completed floor-plan view, pressed Space, and clicked repeatedly near the lower-right edge to select or manipulate the geometry.", "intent": "Review and select the recently edited floor-plan geometry.", "app": "SketchUp 2024", "details": "The model remained visually unchanged, showing the lower-right rectangular region."}, {"start_s": 2115.521, "end_s": 2125.481, "action": "Opened a context menu on the right-side faces, selected the faces, and initiated a face-based operation that displayed a dotted selection box around the right portion of the plan.", "intent": "Select and prepare the right-side faces for a 3D modeling operation.", "app": "SketchUp 2024", "details": "The context menu included commands such as Make Group, Intersect Faces, Reverse Faces, and Generate Faces."}, {"start_s": 2125.481, "end_s": 2135.947, "action": "Confirmed the selected faces, entered 580 mm and then 58, and extruded the right-side floor-plan region upward into a rectangular 3D block.", "intent": "Give the selected floor-plan region thickness and create a raised solid volume.", "app": "SketchUp 2024", "details": "The Push/Pull tool was active; the resulting block remained selected with a visible distance field."}, {"start_s": 2135.947, "end_s": 2145.098, "action": "Selected the large rectangular 3D block, then clicked around it and left the model deselected.", "intent": "Adjust or inspect the block within the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 2145.098, "end_s": 2157.315, "action": "Selected the block and activated Rotate; rotated the view or object while the rotation protractor remained visible, then zoomed out to show multiple floor-plan layouts.", "intent": "Rotate and inspect the block relative to the surrounding floor plans.", "app": "SketchUp 2024", "details": "The rotation angle reached 128.6\u00b0 and later 90.0\u00b0."}, {"start_s": 2157.315, "end_s": 2167.689, "action": "Entered 90 and confirmed it, completing a 90-degree rotation of the selected block; resized or moved a small Windows Explorer window, then clicked the model while Rotate remained active.", "intent": "Set the block to a precise 90-degree orientation.", "app": "SketchUp 2024", "details": "The block remained selected with the rotation tool and an angle of 90.0\u00b0 visible."}, {"start_s": 2167.689, "end_s": 2176.361, "action": "Exited the active rotation state, then clicked and dragged around the block to begin another rotation adjustment while keeping it selected.", "intent": "Continue refining the block\u2019s orientation.", "app": "SketchUp 2024", "details": "The rotation protractor remained visible and the angle returned to 0.0\u00b0."}, {"start_s": 2176.361, "end_s": 2185.795, "action": "Entered 90 and confirmed the rotation, then zoomed or navigated out to reveal several floor-plan layouts and switched to the Move tool with the block still selected.", "intent": "Rotate the block 90 degrees and prepare to reposition it.", "app": "SketchUp 2024", "details": "The block ended in a vertical orientation; the Move tool showed an active distance field."}, {"start_s": 2185.795, "end_s": 2195.099, "action": "Clicked to place the moving block, then repeatedly zoomed or navigated across the SketchUp workspace while continuing to move it among the floor-plan layouts.", "intent": "Reposition the rotated block within the larger model workspace.", "app": "SketchUp 2024", "details": "The distance field changed as the view shifted, and the block remained attached to the Move tool."}, {"start_s": 2195.099, "end_s": 2202.555, "action": "Selected the vertical rectangular component and began moving it, dragging it toward the adjacent floor-plan edge while the distance field updated.", "intent": "Position the selected component in the model.", "app": "SketchUp 2024", "details": "The component remained selected and in an active move operation."}, {"start_s": 2202.555, "end_s": 2211.865, "action": "Continued moving the selected component, adjusted the view with middle-mouse navigation, and dragged it farther along the floor-plan edge.", "intent": "Refine the component's placement.", "app": "SketchUp 2024", "details": "The selected component was shown enlarged near the edge, with the move operation still active."}, {"start_s": 2211.865, "end_s": 2221.379, "action": "Navigated around the model with middle-mouse orbiting and scrolling, changing from a close view to a wider perspective of the floor plans and the selected upright component.", "intent": "Inspect the component placement from different viewpoints.", "app": "SketchUp 2024", "details": "The upright rectangular component remained selected during navigation."}, {"start_s": 2221.379, "end_s": 2231.939, "action": "Orbited and zoomed around the model, then clicked the selected component while continuing the active manipulation.", "intent": "Review and adjust the component in context.", "app": "SketchUp 2024", "details": "The view alternated between wide and closer perspectives of the component and surrounding floor plans."}, {"start_s": 2231.939, "end_s": 2242.067, "action": "Entered 100 into the active measurement field, typed additional unit characters, and confirmed with Enter; then adjusted the view with scrolling and middle-mouse navigation.", "intent": "Set or confirm a precise movement distance for the component.", "app": "SketchUp 2024", "details": "The measurement field visibly showed 100M while the component remained upright and selected."}, {"start_s": 2242.067, "end_s": 2250.687, "action": "Navigated briefly, opened a context menu on the selected component, and then hid or removed the upright component from view; continued scrolling and repositioned the Windows Explorer window.", "intent": "Finish the component operation and clear it from the workspace.", "app": "SketchUp 2024", "details": "The final SketchUp view showed the floor plan without the previously visible upright component; system and window-state changes occurred near the end."}, {"start_s": 2250.687, "end_s": 2270.687, "action": "Remained inactive while viewing the SketchUp model with several black-outline floor-plan drawings.", "intent": "Review the existing SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 2270.687, "end_s": 2278.622, "action": "Scrolled within the SketchUp viewport, slightly changing the view of the floor-plan drawings.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 2278.622, "end_s": 2286.478, "action": "Scrolled repeatedly and middle-clicked in the viewport, repositioning the camera around the floor-plan drawings.", "intent": "Navigate the SketchUp model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 2286.478, "end_s": 2297.718, "action": "Paused over the model, then scrolled to bring the floor-plan drawings closer and larger in the viewport.", "intent": "Inspect the floor-plan geometry more closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 2297.718, "end_s": 2309.406, "action": "Scrolled repeatedly, adjusting the camera so several floor-plan drawings remained visible at a larger scale.", "intent": "Continue reviewing the model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 2309.406, "end_s": 2323.79, "action": "Middle-clicked and moved the SketchUp window, then scrolled repeatedly to zoom toward the floor-plan drawings and inspect their linework.", "intent": "Navigate and closely inspect the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 2323.79, "end_s": 2333.83, "action": "Scrolled repeatedly through the SketchUp model and middle-clicked to adjust the view, enlarging the arrangement of floor-plan-like drawings.", "intent": "Inspect and reposition the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 2333.83, "end_s": 2343.812, "action": "Opened the Edit menu, navigated to Unhide, and displayed its submenu with Selected, Last, and All options.", "intent": "Access visibility controls for hidden model elements.", "app": "SketchUp 2024", "details": "The Unhide submenu remained open at the end of the span."}, {"start_s": 2343.812, "end_s": 2348.112, "action": "Selected an Unhide option, then middle-clicked and scrolled to orbit or reposition the SketchUp camera; the view shifted to a more angled perspective of the floor-plan drawings.", "intent": "Reveal a hidden model element and adjust the 3D view.", "app": "SketchUp 2024", "details": "A vertical wall-like element became visible in the leftmost drawing."}, {"start_s": 2348.112, "end_s": 2368.112, "action": "Paused on the SketchUp model while the floor-plan drawings remained visible, then made a few scrolls and middle-clicks near the end of the interval.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": "No clear model-editing result was visible during the mostly inactive interval."}, {"start_s": 2368.112, "end_s": 2377.764, "action": "Scrolled and middle-clicked repeatedly to zoom and reposition the camera toward the left and central floor-plan drawings.", "intent": "Inspect the floor-plan geometry more closely.", "app": "SketchUp 2024", "details": "The view transitioned from a wider layout to a close view of two plan drawings, including the raised wall-like geometry."}, {"start_s": 2377.764, "end_s": 2385.437, "action": "Continued scrolling to refine the camera position and zoom, keeping the central floor-plan drawing and adjacent raised geometry in view.", "intent": "Continue reviewing the model details.", "app": "SketchUp 2024", "details": null}, {"start_s": 2385.437, "end_s": 2396.028, "action": "Scrolled slightly, typed \u201cR,\u201d and clicked twice on the upper-left corner of the floor-plan geometry, leaving a drawing operation active.", "intent": "Begin or adjust a line-based drawing operation on the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 2396.028, "end_s": 2405.726, "action": "Clicked several points around the floor-plan perimeter and used the mouse wheel to zoom in, then clicked near the upper-right geometry; the view ended in a closer plan view with drawing dimensions visible.", "intent": "Continue drawing or positioning geometry while inspecting the model more closely.", "app": "SketchUp 2024", "details": "The visible dimension readout reached 2000.50 mm \u00d7 580.00 mm."}, {"start_s": 2405.726, "end_s": 2413.829, "action": "Selected the outlined floor-plan region, opened its context menu with right-click, then clicked and typed \u201cP\u201d; the view changed to a 3D extrusion-editing state with the top face selected.", "intent": "Select the modeled region and start or adjust an extrusion.", "app": "SketchUp 2024", "details": "The Push/Pull-style editing state shows a selected top face and a distance readout of 639.64 mm."}, {"start_s": 2413.829, "end_s": 2424.423, "action": "Resized and moved a narrow Windows Explorer window while leaving SketchUp visible; continued the active extrusion, increasing the displayed distance from 844.00 mm to 1156.08 mm.", "intent": "Adjust the extrusion height while managing an overlapping window.", "app": "SketchUp 2024", "details": "SketchUp remained in an active face-editing mode with the top perimeter face selected."}, {"start_s": 2424.423, "end_s": 2437.302, "action": "Moved and resized the Windows Explorer window again; the SketchUp model remained unchanged with the extruded top face selected and the distance readout at 1156.08 mm.", "intent": "Continue the current modeling operation without changing the visible geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 2437.302, "end_s": 2443.508, "action": "Scrolled slightly and clicked with the middle mouse button twice to adjust the 3D view; the camera shifted closer and the extrusion appeared as a taller wall-like form.", "intent": "Inspect the extruded model from a different viewpoint.", "app": "SketchUp 2024", "details": "The final view shows the selected top perimeter and a distance readout of 2041.65 mm."}, {"start_s": 2443.508, "end_s": 2463.508, "action": "Remained idle in SketchUp with the Push/Pull tool active over the selected top face of the 3D model.", "intent": "Pause before continuing the model edit.", "app": "SketchUp", "details": "No interaction events recorded."}, {"start_s": 2463.508, "end_s": 2483.508, "action": "Remained idle in SketchUp while the selected top face and 3D model stayed visible.", "intent": "Continue reviewing the current model state.", "app": "SketchUp", "details": "No interaction events recorded."}, {"start_s": 2483.508, "end_s": 2492.974, "action": "Entered 600 into the active SketchUp measurement field, changing the displayed distance value.", "intent": "Specify a numeric distance for the active modeling operation.", "app": "SketchUp", "details": "The measurement field showed a value of 6 immediately after typing began."}, {"start_s": 2492.974, "end_s": 2502.51, "action": "Deleted the prior measurement entry, entered 4 and an apostrophe, then pressed Enter; the Explorer window was resized during the entry sequence.", "intent": "Confirm a four-foot measurement for the active modeling operation.", "app": "SketchUp", "details": "The measurement field displayed 4 after confirmation."}, {"start_s": 2502.51, "end_s": 2512.446, "action": "Exited the active modeling tool, scrolled to zoom out across the SketchUp workspace, and middle-clicked the model area.", "intent": "Review the model in a wider workspace view.", "app": "SketchUp", "details": "The view zoomed out to show multiple surrounding floor-plan layouts."}, {"start_s": 2512.446, "end_s": 2520.294, "action": "Middle-clicked and zoomed around the model, clicked the left toolbar, then clicked the right end of the structure; the view returned to a closer view and displayed a 1080.25 mm linear dimension.", "intent": "Measure or inspect the height of the right side of the 3D structure.", "app": "SketchUp", "details": "The status bar indicated selection of the second point for a linear dimension."}, {"start_s": 2520.294, "end_s": 2530.174, "action": "Pressed Escape to exit the active linear-dimension operation, then scrolled without changing the visible model.", "intent": "Exit the measurement command and review the model.", "app": "SketchUp 2024", "details": "The 3D model remained visible with the dimension tool no longer awaiting a second point."}, {"start_s": 2530.174, "end_s": 2540.334, "action": "Selected the model and navigated the view with middle-clicks and scrolling, changing from a close perspective to a top-oriented view of the floor plans.", "intent": "Inspect the model and related floor-plan layout.", "app": "SketchUp 2024", "details": "The view ended centered on a floor plan with kitchen and cabinet outlines."}, {"start_s": 2540.334, "end_s": 2549.488, "action": "Clicked the floor-plan geometry, selected a face or region, and entered 700 followed by MM and Enter to set a distance while manipulating the geometry.", "intent": "Adjust the selected model element to a specified dimension.", "app": "SketchUp 2024", "details": "The selected geometry became a large highlighted 3D face, and the Measurements box showed 1444.95 mm afterward."}, {"start_s": 2549.488, "end_s": 2554.992, "action": "Scrolled and middle-clicked to zoom out and orbit around the selected model, revealing several surrounding floor-plan drawings.", "intent": "Review the adjusted geometry in the broader model context.", "app": "SketchUp 2024", "details": "The model appeared smaller within a workspace containing multiple plan layouts."}, {"start_s": 2554.992, "end_s": 2564.992, "action": "Scrolled to reposition the view, pressed Space, and clicked near the model while keeping the surrounding floor plans visible.", "intent": "Navigate and prepare to select or manipulate the model.", "app": "SketchUp 2024", "details": "The view remained focused on the central 3D structure and nearby plan outlines."}, {"start_s": 2564.992, "end_s": 2575.294, "action": "Selected the central 3D structure, activated Move, and navigated while dragging the selected object; the object remained attached to the cursor with a displayed distance of 444.89 mm.", "intent": "Move the selected model component within the floor-plan layout.", "app": "SketchUp 2024", "details": "The final view showed the blue-selected structure in move mode among multiple floor plans."}, {"start_s": 2575.294, "end_s": 2584.742, "action": "Orbited and zoomed the SketchUp model, then opened a context menu on the displayed geometry and began selecting nearby elements.", "intent": "Inspect and select model geometry.", "app": "SketchUp", "details": "A 3D architectural layout with floor-plan outlines and white wall masses remained visible."}, {"start_s": 2584.742, "end_s": 2594.255, "action": "Dismissed the context menu, adjusted the view with orbiting and scrolling, and repositioned the camera to show several plan areas and wall masses.", "intent": "Review the model from different viewpoints.", "app": "SketchUp", "details": "The view changed from a closer wall view to a wider overview of multiple layouts."}, {"start_s": 2594.255, "end_s": 2604.431, "action": "Selected a wall assembly, entered a move operation, typed a distance value, and continued orbiting and zooming while the geometry remained highlighted.", "intent": "Move or position the selected wall geometry.", "app": "SketchUp", "details": "Blue selection outlines and the move-tool distance readout were visible."}, {"start_s": 2604.431, "end_s": 2613.937, "action": "Zoomed into the selected wall corner and clicked repeatedly near its base while keeping the move operation active.", "intent": "Refine the placement of the selected geometry.", "app": "SketchUp", "details": "The camera focused tightly on a wall-to-floor corner with the move cursor and inference markers visible."}, {"start_s": 2613.937, "end_s": 2623.326, "action": "Entered numeric move values of 100 MM, confirmed with Enter, and orbited out to review the resulting wall placement.", "intent": "Apply a precise 100 mm adjustment to the selected geometry.", "app": "SketchUp", "details": "The status bar showed a 100MM distance before the view shifted to a wider perspective."}, {"start_s": 2623.326, "end_s": 2634.486, "action": "Orbited and zoomed around the architectural model, briefly moved an Explorer window, then returned to the SketchUp view and opened the File menu.", "intent": "Review the adjusted model and access file controls.", "app": "SketchUp", "details": "The final view showed the adjusted white wall assembly beside adjacent floor-plan outlines."}, {"start_s": 2634.486, "end_s": 2644.626, "action": "Navigated around the SketchUp model with clicks, scrolling, and view manipulation, moving from a wider view of the walls toward a close-up of the corner base.", "intent": "Inspect the modeled wall and corner area.", "app": "SketchUp 2024", "details": null}, {"start_s": 2644.626, "end_s": 2654.006, "action": "Clicked along the lower wall trim, selected the base strip, and manipulated the view; the trim became highlighted while the camera shifted toward the wall corner.", "intent": "Select and prepare the lower trim geometry for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 2654.006, "end_s": 2663.038, "action": "Entered 40MM and confirmed it, applying a 40 mm Push/Pull operation to the selected lower trim; then orbited the camera to inspect the result from below.", "intent": "Adjust the selected trim geometry by 40 mm.", "app": "SketchUp 2024", "details": "The SketchUp measurement field showed 40M/40MM during the edit."}, {"start_s": 2663.038, "end_s": 2673.23, "action": "Repositioned the view around the corner and selected the lower wall face/trim for another Push/Pull operation, leaving the tool active with distance 0.00 mm.", "intent": "Continue editing the lower wall trim geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 2673.23, "end_s": 2683.078, "action": "Entered 40 MM and confirmed the measurement, applying another 40 mm Push/Pull adjustment; then orbited and zoomed out to inspect the modified corner and adjoining walls.", "intent": "Apply a 40 mm adjustment to the selected wall trim.", "app": "SketchUp 2024", "details": "The measurement field displayed 40MM."}, {"start_s": 2683.078, "end_s": 2694.145, "action": "Zoomed and orbited around the SketchUp model, moving from the edited corner to a wider view of the walls and surrounding floor plan while clicking to adjust the viewpoint.", "intent": "Review the edited geometry in the broader model context.", "app": "SketchUp 2024", "details": null}, {"start_s": 2694.145, "end_s": 2706.201, "action": "Orbited and zoomed around the SketchUp model, moving from a wider view of the room-like walls and nearby floor plans to a close-up of the wall base.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 2706.201, "end_s": 2718.248, "action": "Orbited and zoomed around the model, first enlarging the wall and tower-like element and then pulling back to show the surrounding floor-plan geometry.", "intent": "Review the model layout and spatial relationships.", "app": "SketchUp 2024", "details": null}, {"start_s": 2718.248, "end_s": 2728.206, "action": "Orbited around the room enclosure and adjusted the view to show the long wall, corner, and tall adjacent wall; clicked near the wall geometry near the end of the span.", "intent": "Inspect the enclosure from another angle and interact with nearby geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 2728.206, "end_s": 2748.206, "action": "Repeatedly clicked the wall surfaces and edges, selecting the long wall and connected corner geometry; the selected faces and edges became highlighted in blue.", "intent": "Select and inspect the wall geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 2748.206, "end_s": 2764.395, "action": "Paused with the wall geometry still selected; system state changes occurred, followed by a brief Ctrl keypress.", "intent": "Remain on the selected SketchUp geometry while the workstation state changed.", "app": "SketchUp 2024", "details": null}, {"start_s": 2764.395, "end_s": 2784.395, "action": "Remained idle on the SketchUp view with the wall and corner geometry selected.", "intent": "Keep the current model selection under review.", "app": "SketchUp 2024", "details": null}, {"start_s": 2784.395, "end_s": 2794.586, "action": "Opened the Edit menu and navigated among selection and editing commands while the model geometry remained selected.", "intent": "Access editing commands for the selected SketchUp geometry.", "app": "SketchUp 2024", "details": "The Edit menu was open with options including Cut, Copy, Paste, Delete, Select All, and selection controls."}, {"start_s": 2794.586, "end_s": 2804.745, "action": "Activated Push/Pull on the selected top face, adjusted the face interactively, and then returned to selection while the model remained highlighted.", "intent": "Modify the height or extrusion of the selected top face.", "app": "SketchUp 2024", "details": "The Push/Pull tool showed an in-progress distance of 202.90 mm before the selection view returned."}, {"start_s": 2804.745, "end_s": 2814.681, "action": "Opened the context menu for the selected geometry, reviewed its editing options, and orbited the model to a wider view.", "intent": "Inspect available geometry operations and review the model from another angle.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, and other geometry tools."}, {"start_s": 2814.681, "end_s": 2824.848, "action": "Continued using Push/Pull on the selected top face and orbited the view, changing the displayed perspective while keeping the face selected.", "intent": "Continue adjusting the selected face and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "The Push/Pull distance readout showed 185.40 mm during the interaction."}, {"start_s": 2824.848, "end_s": 2837.451, "action": "Orbited the model and entered 60MM in the measurement field, confirming the value to set the Push/Pull distance.", "intent": "Set the selected face extrusion to a precise 60 mm distance.", "app": "SketchUp 2024", "details": "The final measurement field displayed 60.00 mm."}, {"start_s": 2837.451, "end_s": 2846.586, "action": "Orbited the SketchUp model through several viewpoints while the Push/Pull tool remained active and the selected face showed a 60.00 mm distance.", "intent": "Review the adjusted geometry from different angles.", "app": "SketchUp 2024", "details": "The model changed from an elevated angled view to a broader front perspective; no additional numeric edit was entered."}, {"start_s": 2846.586, "end_s": 2854.314, "action": "Selected the top face of the model with the Push/Pull tool and typed 20MM as the extrusion distance.", "intent": "Set the thickness or height of the selected top face.", "app": "SketchUp 2024", "details": "The distance field showed 82.51 mm before the new value was entered."}, {"start_s": 2854.314, "end_s": 2862.674, "action": "Confirmed the 20MM distance, then clicked and adjusted the view around the selected top face with middle-mouse navigation.", "intent": "Apply the extrusion and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "The distance field displayed 20.00 mm and the top face appeared selected."}, {"start_s": 2862.674, "end_s": 2872.889, "action": "Scrolled to navigate the model view and clicked the orbit control, changing to a wider angled view of the extruded corner geometry.", "intent": "Inspect the edited geometry from another angle.", "app": "SketchUp 2024", "details": "The selected top face and surrounding walls remained visible during navigation."}, {"start_s": 2872.889, "end_s": 2882.674, "action": "Orbited and adjusted the camera around the corner structure, clicked several model areas, and switched back to the Select tool.", "intent": "Review the extrusion and reposition the view for inspection.", "app": "SketchUp 2024", "details": "The final view showed the corner structure and surrounding floor-plan lines."}, {"start_s": 2882.674, "end_s": 2890.313, "action": "Continued orbiting and zooming around the model, moving from a wider view to a close angled view of the raised top edge and walls.", "intent": "Examine the edited top surface and wall alignment.", "app": "SketchUp 2024", "details": "No additional geometry edit was clearly visible."}, {"start_s": 2890.313, "end_s": 2900.273, "action": "Navigated the camera with scrolling and middle-mouse orbiting to review the structure from wider overhead angles.", "intent": "Inspect the completed model from multiple viewpoints.", "app": "SketchUp 2024", "details": "The final view showed the L-shaped raised structure beside the adjacent wall and floor-plan layout."}, {"start_s": 2900.273, "end_s": 2910.329, "action": "Scrolled extensively through the SketchUp model and clicked within the viewport, changing the camera from a close-up corner view to a wider view of the modeled geometry.", "intent": "Navigate and inspect the model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 2910.329, "end_s": 2930.329, "action": "Scrolled through the SketchUp viewport to reposition the camera, ending on a close-up of the gray top surface and adjacent white vertical face.", "intent": "Adjust the model view for inspection.", "app": "SketchUp", "details": null}, {"start_s": 2930.329, "end_s": 2950.329, "action": "Remained inactive while the close-up SketchUp model view stayed unchanged.", "intent": "Review the current model view.", "app": "SketchUp", "details": null}, {"start_s": 2950.329, "end_s": 2956.795, "action": "Clicked the taskbar and briefly switched through Chrome and Windows Explorer before returning to SketchUp; the window reloaded and changed its title to \u201cUntitled - SketchUp 2024.\u201d", "intent": "Return to SketchUp and wait for the document window to finish loading.", "app": "SketchUp; Google Chrome; Windows Explorer", "details": "SketchUp displayed a blank white loading view during the transition."}, {"start_s": 2956.795, "end_s": 2971.944, "action": "Waited on the blank \u201cUntitled - SketchUp 2024\u201d window while SketchUp remained active, then transitioned to another SketchUp window titled \u201c1001bit pro.\u201d", "intent": "Wait for SketchUp/plugin windows to initialize.", "app": "SketchUp", "details": "The viewport remained blank throughout the span."}, {"start_s": 2971.944, "end_s": 2984.56, "action": "Opened and cycled through multiple SketchUp plugin windows, returned to the model, scrolled and middle-clicked in the viewport, and changed the visible view to a patterned curved panel with the CTS_Group and Component_V1.0.3 toolbar open.", "intent": "Inspect or manipulate the model using SketchUp extension tools.", "app": "SketchUp", "details": "Visible plugin windows included CTS_Group and Component_V1.0.3 and several other extension panels."}, {"start_s": 2984.56, "end_s": 2994.535, "action": "Dismissed the save-changes prompt for the untitled SketchUp model, then switched through the recording overlay and returned to SketchUp\u2019s welcome screen.", "intent": "Close the unsaved untitled model and return to SketchUp home.", "app": "SketchUp", "details": "The recorder window was visible during the transition."}, {"start_s": 2994.535, "end_s": 3008.596, "action": "Reviewed the SketchUp Home screen and opened the Open file menu, leaving its My Drive and Trimble Connect options displayed.", "intent": "Choose a source for opening a SketchUp model.", "app": "SketchUp", "details": "Recent files including Shelves2, SLEVES, and Untitled were visible."}, {"start_s": 3008.596, "end_s": 3017.4, "action": "Opened the Windows file picker from SketchUp, focused the file name field, and typed KITCH to filter or select a kitchen model filename.", "intent": "Locate the KITCHEN2 SketchUp file.", "app": "SketchUp", "details": "The file-name suggestions included KITCHEN1.pdf, KITCHEN1.skb, KITCHEN1.skp, and KITCHEN2.skp."}, {"start_s": 3017.4, "end_s": 3023.781, "action": "Activated the selected file in the picker and waited while SketchUp loaded the model titled KITCHEN2.", "intent": "Open the KITCHEN2 SketchUp model.", "app": "SketchUp", "details": "The SketchUp window was blank while loading."}, {"start_s": 3023.781, "end_s": 3028.888, "action": "Returned to the KITCHEN2 model, used middle-button navigation and scroll gestures to adjust the camera, and changed from a wider overview toward the grouped kitchen layouts.", "intent": "Inspect and position the view of the opened kitchen model.", "app": "SketchUp", "details": "Multiple kitchen plan and elevation-like layouts were visible in the modeling workspace."}, {"start_s": 3028.888, "end_s": 3044.566, "action": "Continued navigating the KITCHEN2 model with scroll and middle-button orbit actions, zooming into the raised L-shaped kitchen geometry and then settling on a wider angled view that included adjacent plan layouts.", "intent": "Examine the kitchen geometry from different viewpoints.", "app": "SketchUp", "details": "The final view showed an L-shaped counter or wall assembly, a tall rectangular element, and surrounding linework plans."}, {"start_s": 3044.566, "end_s": 3054.526, "action": "Navigated around the SketchUp model with middle-clicks and scrolls, then repeatedly clicked a model edge until the geometry became selected and the document title changed to KITCHEN2*.", "intent": "Inspect and select the kitchen model geometry for editing.", "app": "SketchUp 2024", "details": "The selected geometry is highlighted in blue in the final view."}, {"start_s": 3054.526, "end_s": 3071.687, "action": "Clicked and scrolled around the selected model geometry to adjust the view and selection, then typed the letter R.", "intent": "Continue inspecting the selected geometry and prepare a tool or command.", "app": "SketchUp 2024", "details": "The view shifted to a closer angle of the corner and adjacent faces."}, {"start_s": 3071.687, "end_s": 3084.302, "action": "Typed a space and A, clicked points along the model corner, and adjusted the geometry with the active Bulge tool; the displayed bulge value reached 20.00 mm.", "intent": "Apply a rounded or bulged modification to the selected corner edge.", "app": "SketchUp 2024", "details": "The final view shows a semicircular bulge added to the end of the white model face."}, {"start_s": 3084.302, "end_s": 3093.944, "action": "Scrolled and middle-clicked extensively to orbit and zoom out, then clicked the model while reviewing the modified corner and surrounding structure.", "intent": "Inspect the modified geometry from broader viewpoints.", "app": "SketchUp 2024", "details": "The view expanded from the close corner to a larger rooftop or kitchen-like structure."}, {"start_s": 3093.944, "end_s": 3102.19, "action": "Scrolled and middle-clicked to reposition the camera, then repeatedly clicked a long upper edge to select it.", "intent": "Navigate to and select the next model edge for editing.", "app": "SketchUp 2024", "details": "The long edge is highlighted blue in the final screenshot."}, {"start_s": 3102.19, "end_s": 3111.198, "action": "Scrolled to inspect the selected edge and nearby corner, clicked the model, and ended with the profile-extrusion tool active.", "intent": "Prepare to extrude the selected profile along the model path.", "app": "SketchUp 2024", "details": "The status bar says to click a profile to extrude along the pre-selected path."}, {"start_s": 3111.198, "end_s": 3120.686, "action": "Scrolled and adjusted the SketchUp camera around the long countertop edge, then clicked middle mouse to orbit and inspect the rounded trim profile.", "intent": "Inspect the modeled countertop edge and trim from different viewpoints.", "app": "SketchUp 2024", "details": "Extrusion tool remained active with the prompt to click a profile."}, {"start_s": 3120.686, "end_s": 3131.496, "action": "Continued orbiting and scrolling around the countertop and adjoining corner, bringing the rounded edge and interior corner into view.", "intent": "Review the countertop geometry and corner connection.", "app": "SketchUp 2024", "details": "No visible geometry edit was confirmed."}, {"start_s": 3131.496, "end_s": 3141.182, "action": "Orbited and zoomed out from the close-up edge to reveal the larger kitchen layout, including the L-shaped counter and tall cabinet block.", "intent": "Inspect the modeled kitchen assembly in a wider view.", "app": "SketchUp 2024", "details": "The extrusion prompt remained visible."}, {"start_s": 3141.182, "end_s": 3151.08, "action": "Adjusted the camera around the kitchen model, issued several keyboard commands, and changed to a close zoom view of the countertop surface and edge.", "intent": "Navigate and inspect the model at different scales.", "app": "SketchUp 2024", "details": "The window title changed to KITCHEN2 - SketchUp 2024; the Zoom tool was active near the end."}, {"start_s": 3151.08, "end_s": 3171.08, "action": "Scrolled and clicked near the countertop edge, then issued keyboard commands while leaving the model in a close view of the long white counter face and trim.", "intent": "Continue reviewing the countertop model.", "app": "SketchUp 2024", "details": "The Select tool was active at the end; no definite object selection was visible."}, {"start_s": 3171.08, "end_s": 3191.08, "action": "Paused on the kitchen model, then scrolled to zoom out and reveal the L-shaped counter, surrounding floor, and tall cabinet block.", "intent": "Review the overall kitchen layout from a wider perspective.", "app": "SketchUp 2024", "details": "A tooltip for Make Loose Component appeared briefly before the final zoomed-out view."}, {"start_s": 3191.08, "end_s": 3201.03, "action": "Scrolled and clicked repeatedly around the SketchUp model, then changed the view and left the model marked as modified.", "intent": "Inspect and adjust the 3D model view.", "app": "SketchUp 2024", "details": "The view moved to a close-up of the raised wall/counter geometry; the title changed to KITCHEN2*."}, {"start_s": 3201.03, "end_s": 3210.919, "action": "Selected a narrow face, activated Push/Pull, and navigated the camera to another side of the model.", "intent": "Edit the selected face and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "The selected face was highlighted and Push/Pull showed a 0.00 mm distance before the view shifted."}, {"start_s": 3210.919, "end_s": 3221.792, "action": "Orbited and zoomed around the model, selected a face, and used Push/Pull to set or preview a 20.00 mm extrusion before changing the view again.", "intent": "Modify the wall/counter geometry while checking it from different angles.", "app": "SketchUp 2024", "details": "A face was highlighted with Push/Pull active and the distance field visibly showed 20.00 mm."}, {"start_s": 3221.792, "end_s": 3231.886, "action": "Continued selecting faces and navigating around the model, used Push/Pull on a narrow upper strip, and then zoomed out to review the overall structure.", "intent": "Continue shaping the model and inspect the edited geometry.", "app": "SketchUp 2024", "details": "The narrow strip was highlighted during editing; the final view showed the L-shaped low structure and tall adjoining wall."}, {"start_s": 3231.886, "end_s": 3240.711, "action": "Clicked and orbited around the model, moving from a close view to a wider perspective of the L-shaped structure and surrounding floor plan lines.", "intent": "Review the model from multiple perspectives.", "app": "SketchUp 2024", "details": "No definite geometry change was visible; the camera ended on a wider exterior perspective."}, {"start_s": 3240.711, "end_s": 3250.751, "action": "Zoomed and orbited toward the L-shaped wall, repeatedly clicked along its upper surface, and ended with the long top face selected.", "intent": "Inspect and select the upper face for a possible subsequent edit.", "app": "SketchUp 2024", "details": "The final screenshot showed the top surface highlighted in blue with a dotted selection pattern."}, {"start_s": 3250.751, "end_s": 3260.24, "action": "Selected the countertop face, activated Push/Pull, entered 40 mm, added the unit suffix, and confirmed the extrusion.", "intent": "Set the countertop or wall thickness to approximately 40 mm.", "app": "SketchUp 2024", "details": "The face remained selected and the distance field showed 40.08 mm."}, {"start_s": 3260.24, "end_s": 3271.072, "action": "Orbit-rotated the model and zoomed out to inspect the resulting L-shaped 3D structure from multiple angles.", "intent": "Review the modeled geometry and its placement in the surrounding drawing.", "app": "SketchUp 2024", "details": null}, {"start_s": 3271.072, "end_s": 3281.473, "action": "Continued orbiting and zooming out, changing from a close perspective to a wider view that showed the 3D structure alongside surrounding floor-plan drawings.", "intent": "Inspect the model in relation to the larger plan layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 3281.473, "end_s": 3295.464, "action": "Navigated to the nearby floor-plan drawing, selected a dimension-related tool, and zoomed or panned to center the kitchen layout.", "intent": "Prepare the floor plan for measurement or annotation.", "app": "SketchUp 2024", "details": "The kitchen plan with appliance symbols was visible, and the linear-dimension tool appeared active."}, {"start_s": 3295.464, "end_s": 3308.168, "action": "Clicked an endpoint in the kitchen plan to continue a linear dimension, leaving the dimension operation active while the view remained focused on the plan.", "intent": "Measure or annotate a segment of the kitchen layout.", "app": "SketchUp 2024", "details": "A temporary dimension label around 5800 mm and an endpoint tooltip were visible."}, {"start_s": 3308.168, "end_s": 3318.959, "action": "Scrolled and adjusted the view to compare the 3D kitchen geometry with adjacent floor-plan drawings.", "intent": "Review the model and plan together after the dimensioning step.", "app": "SketchUp 2024", "details": "No additional modeling edit was visibly completed."}, {"start_s": 3318.959, "end_s": 3328.079, "action": "Navigated the SketchUp model with middle-button clicks and scroll gestures, changing from a wider view of the building mass to a lower side perspective.", "intent": "Inspect the 3D model from different angles.", "app": "SketchUp", "details": null}, {"start_s": 3328.079, "end_s": 3348.079, "action": "Waited while SketchUp briefly hid and restored, then scrolled and adjusted the view to zoom out and reveal the modeled structure and surrounding floor-plan outlines.", "intent": "Review the model layout in a broader view.", "app": "SketchUp", "details": "The application was hidden and unhidden during the interval."}, {"start_s": 3348.079, "end_s": 3356.728, "action": "Used middle-button navigation and repeated scroll gestures to orbit and zoom toward the L-shaped wall and adjacent tall rectangular structure.", "intent": "Inspect the wall geometry more closely.", "app": "SketchUp", "details": null}, {"start_s": 3356.728, "end_s": 3367.093, "action": "Continued scrolling and middle-button navigation, progressively zooming in on the long wall, its corner, and the surrounding base edges.", "intent": "Examine the wall and corner details.", "app": "SketchUp", "details": null}, {"start_s": 3367.093, "end_s": 3377.087, "action": "Scrolled and navigated around the wall corner, moving into a close-up view; briefly resized or moved a Windows Explorer window while continuing the model inspection.", "intent": "Refine the close-up inspection view.", "app": "SketchUp", "details": "A Windows Explorer window resize and move was recorded."}, {"start_s": 3377.087, "end_s": 3387.583, "action": "Navigated slightly, clicked repeatedly on the upper wall surface, and selected the top face, which became highlighted with a blue outline and stippled fill; typed the letter A afterward.", "intent": "Select and possibly prepare to edit the wall\u2019s top face.", "app": "SketchUp", "details": "The final view shows the top face selected."}, {"start_s": 3387.583, "end_s": 3396.725, "action": "Adjusted the bulge tool on the model edge by clicking and dragging, scrolling, and orbiting the view; resized the Windows Explorer window while leaving the bulge value around 25.05 mm.", "intent": "Refine the edge bulge while inspecting the model from a different view.", "app": "SketchUp 2024", "details": "Bulge tool remained active."}, {"start_s": 3396.725, "end_s": 3416.725, "action": "Waited with the SketchUp model and active bulge tool unchanged on screen.", "intent": "Pause while reviewing the current bulge adjustment.", "app": "SketchUp 2024", "details": "No recorded interaction events."}, {"start_s": 3416.725, "end_s": 3436.725, "action": "Continued waiting with the same close-up model view and bulge tool active; the displayed bulge value varied slightly to approximately 5.10\u20135.56 mm.", "intent": "Review the active edge adjustment without further interaction.", "app": "SketchUp 2024", "details": "No recorded interaction events."}, {"start_s": 3436.725, "end_s": 3447.535, "action": "Orbited the model with middle-click actions and scrolling, changing from a close-up corner view to a wider view of the surrounding cabinet-like geometry; left the bulge tool active with a displayed value of about 64.37 mm.", "intent": "Inspect the bulged edge from multiple viewpoints.", "app": "SketchUp 2024", "details": "View orientation changed substantially during orbiting."}, {"start_s": 3447.535, "end_s": 3457.141, "action": "Navigated around the model with repeated orbiting and scrolling, typed a space, and clicked the geometry; changed from the corner close-up to a broad view of the top surface and then exited the active bulge interaction.", "intent": "Inspect the modeled top edge and return to general selection/navigation.", "app": "SketchUp 2024", "details": "The status bar ended on selection mode."}, {"start_s": 3457.141, "end_s": 3465.919, "action": "Orbited and scrolled around the model, resized the Windows Explorer window, and repeatedly clicked along the visible front edge while keeping the top surface in view.", "intent": "Inspect or select the modeled top/front edge from a closer angle.", "app": "SketchUp 2024", "details": "Selection tool remained active."}, {"start_s": 3465.919, "end_s": 3475.813, "action": "Clicked and scrolled around the model, then activated the Follow Me/extrusion tool and positioned it along the edge of the counter-like geometry.", "intent": "Shape or refine a rounded edge profile along the model.", "app": "SketchUp 2024", "details": "The view moved from a close-up of the selected top edge to a rounded white edge; the status bar indicated profile extrusion."}, {"start_s": 3475.813, "end_s": 3486.007, "action": "Selected the rounded profile and continued scrolling and middle-button navigation around the long counter edge, keeping the extrusion tool active.", "intent": "Continue inspecting or applying the edge extrusion along the model.", "app": "SketchUp 2024", "details": "The model view shifted from the rounded end to a broader view of the long white front panel and top surface."}, {"start_s": 3486.007, "end_s": 3495.901, "action": "Scrolled and orbited around the model, then clicked the geometry while the extrusion tool remained active to adjust or inspect the extended edge.", "intent": "Review the extruded counter geometry from different angles.", "app": "SketchUp 2024", "details": "The view changed to an oblique perspective showing the L-shaped counter, raised end wall, and rounded front edge."}, {"start_s": 3495.901, "end_s": 3507.589, "action": "Clicked repeatedly on the front edge, pressed the spacebar, and orbited and zoomed out to inspect the resulting counter assembly.", "intent": "Select or finalize the modeled edge and review the overall shape.", "app": "SketchUp 2024", "details": "The view progressed to a wider perspective showing the L-shaped white counter, gray top surfaces, and adjacent tall rectangular structure."}, {"start_s": 3507.589, "end_s": 3516.397, "action": "Scrolled and orbited around the model, moving from the overall assembly to close views of the long top edge and inside corner.", "intent": "Inspect the continuity and finish of the modeled counter edges.", "app": "SketchUp 2024", "details": "Close-up views showed the white front panel, gray countertop, inside corner, and narrow edge trim."}, {"start_s": 3516.397, "end_s": 3525.623, "action": "Orbited and zoomed out from the inside corner, then clicked and dragged near the upper edge to select or adjust geometry before returning to an overall view.", "intent": "Review the completed modeled assembly and make a final edge adjustment.", "app": "SketchUp 2024", "details": "The final view showed the full L-shaped counter, tall rectangular structure, and surrounding floor-plan linework."}, {"start_s": 3525.623, "end_s": 3543.124, "action": "Orbited the SketchUp view around a partially modeled kitchen and nearby floor-plan drawings, then clicked the model area to continue navigation.", "intent": "Inspect the 3D kitchen model and surrounding plan layouts.", "app": "SketchUp", "details": "Middle-click orbit and zero-delta scroll events changed the camera view."}, {"start_s": 3543.124, "end_s": 3550.623, "action": "Zoomed and orbited out to reveal several separate floor-plan layouts, then clicked near the upper plan drawings while adjusting the view.", "intent": "Review multiple kitchen or floor-plan configurations.", "app": "SketchUp", "details": "The view expanded from one model and plan to a wider arrangement of several layouts."}, {"start_s": 3550.623, "end_s": 3569.8, "action": "Zoomed and panned toward a kitchen floor plan, bringing its counter arrangement and four-burner cooktop into close view beside the 3D model.", "intent": "Inspect details of the selected kitchen layout.", "app": "SketchUp", "details": "Repeated scroll navigation focused the camera on the plan's upper counter and appliance area."}, {"start_s": 3569.8, "end_s": 3579.414, "action": "Orbited and zoomed back out across the model sheet, moving from the close kitchen plan to a broader view of the 3D model and neighboring layouts.", "intent": "Compare the detailed plan with the other displayed layouts.", "app": "SketchUp", "details": "Middle-click navigation shifted between close and wide perspectives."}, {"start_s": 3579.414, "end_s": 3592.019, "action": "Navigated around the kitchen plan with middle-click orbit and scroll actions, briefly resized or moved an Explorer window, then returned focus to SketchUp.", "intent": "Continue inspecting the kitchen plan while managing the application window.", "app": "SketchUp", "details": "A Windows Explorer resize occurred during the span; SketchUp was active again at the end."}, {"start_s": 3592.019, "end_s": 3602.277, "action": "Switched between SketchUp windows, resized and repositioned the active window, then continued dragging and scrolling over the kitchen floor plan and clicked the view.", "intent": "Adjust the SketchUp workspace and continue reviewing the plan.", "app": "SketchUp", "details": "The active SketchUp window changed size substantially; the final view remained centered on the kitchen layout."}, {"start_s": 3602.277, "end_s": 3621.823, "action": "Clicked and scrolled in the SketchUp viewport, zooming out from a close floor-plan view to reveal several plan layouts and a partially modeled structure.", "intent": "Survey the overall model layout.", "app": "SketchUp", "details": "System configuration changes occurred during the span."}, {"start_s": 3621.823, "end_s": 3631.236, "action": "Orbited and zoomed the SketchUp viewport around the collection of floor plans, shifting from a broad overview toward the modeled wall structure; an Explorer window was resized or moved near the end.", "intent": "Inspect different model areas and viewpoints.", "app": "SketchUp", "details": "No geometry edits are visible."}, {"start_s": 3631.236, "end_s": 3636.511, "action": "Orbited and zoomed around the modeled structure and nearby floor plans, ending on a close-up of the wall corner and base edges.", "intent": "Examine the modeled wall detail closely.", "app": "SketchUp", "details": "The view changed substantially without visible object creation or modification."}, {"start_s": 3636.511, "end_s": 3648.786, "action": "Waited with the SketchUp camera held on a close-up corner of the modeled walls and floor edges; an Explorer window was moved or resized near the end.", "intent": "Pause while reviewing the current model view.", "app": "SketchUp", "details": null}, {"start_s": 3648.786, "end_s": 3659.181, "action": "Scrolled to zoom out from the wall-corner close-up, then clicked and continued navigating until the full set of floor plans and the modeled structure appeared in a distant overview.", "intent": "Return to an overall model view.", "app": "SketchUp", "details": "No visible geometry edits occurred."}, {"start_s": 3659.181, "end_s": 3669.469, "action": "Clicked and orbited or zoomed around the SketchUp scene, moving from a distant overview to a closer angled view of the modeled structure and surrounding floor plans.", "intent": "Inspect the model and plan layouts from another angle.", "app": "SketchUp", "details": "Navigation only; no visible geometry changes."}, {"start_s": 3669.469, "end_s": 3681.357, "action": "Clicked in the SketchUp model and scrolled repeatedly, slightly repositioning the view across multiple floor-plan drawings.", "intent": "Navigate and inspect the modeled floor plans.", "app": "SketchUp 2024", "details": null}, {"start_s": 3681.357, "end_s": 3687.408, "action": "Scrolled repeatedly to zoom into a floor-plan layout, bringing the kitchen area and surrounding counters into close view.", "intent": "Inspect details of the selected floor-plan layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 3687.408, "end_s": 3706.175, "action": "Reviewed the zoomed floor plan with minimal view adjustment, then typed the letter R.", "intent": "Continue inspecting the model and enter a command or input.", "app": "SketchUp 2024", "details": "The visible model remained a kitchen floor plan with counters and a cooktop."}, {"start_s": 3706.175, "end_s": 3713.712, "action": "Scrolled to reposition and zoom the SketchUp view, revealing several floor-plan variants; hovered near the top of the central plan and displayed an endpoint inference tooltip.", "intent": "Navigate the model and locate a precise endpoint for drawing or editing.", "app": "SketchUp 2024", "details": "The tooltip read \u201cEndpoint in Range-Oven - 30 in top.\u201d"}, {"start_s": 3713.712, "end_s": 3733.712, "action": "Remained idle while viewing a close-up of the kitchen floor plan and cooktop area.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 3733.712, "end_s": 3753.712, "action": "Remained idle on the same close-up kitchen floor-plan view.", "intent": "Continue reviewing the model without making changes.", "app": "SketchUp 2024", "details": null}, {"start_s": 3753.712, "end_s": 3773.712, "action": "Remained inactive while viewing the SketchUp kitchen plan.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 3773.712, "end_s": 3777.79, "action": "Scrolled repeatedly to zoom out from the kitchen plan and reveal multiple surrounding layouts.", "intent": "Inspect the broader set of kitchen drawings.", "app": "SketchUp 2024", "details": "The view changed from a close kitchen plan to several plan and perspective layouts."}, {"start_s": 3777.79, "end_s": 3797.79, "action": "Paused on the zoomed-out SketchUp workspace, with multiple kitchen layouts visible and an endpoint tooltip shown briefly.", "intent": "Review the available model layouts.", "app": "SketchUp 2024", "details": "No interaction was recorded during this interval."}, {"start_s": 3797.79, "end_s": 3816.43, "action": "Scrolled to adjust the view, first slightly and then substantially, bringing the upper kitchen plan closer while keeping adjacent layouts visible.", "intent": "Reposition the model view for inspection.", "app": "SketchUp 2024", "details": "The selected kitchen layout became larger and more centered."}, {"start_s": 3816.43, "end_s": 3836.43, "action": "Remained inactive while viewing the enlarged kitchen plan and nearby perspective model.", "intent": "Review the kitchen arrangement and appliance placement.", "app": "SketchUp 2024", "details": "The Range-Oven endpoint tooltip was visible briefly near the upper appliance."}, {"start_s": 3836.43, "end_s": 3848.524, "action": "Scrolled repeatedly to change the zoom, then middle-clicked to orbit or reposition the SketchUp camera, ending on a wider view of several layouts.", "intent": "Inspect the kitchen model from a broader viewpoint.", "app": "SketchUp 2024", "details": "The final view showed multiple plan and perspective layouts with the orbit tool active."}, {"start_s": 3848.524, "end_s": 3862.582, "action": "Navigated around the SketchUp model with middle-clicks and repeated scrolls, shifting from a wider view of several kitchen layouts toward the central kitchen plan.", "intent": "Inspect the kitchen layouts and reposition the 3D view.", "app": "SketchUp 2024", "details": null}, {"start_s": 3862.582, "end_s": 3882.582, "action": "Paused on a close view of the central kitchen plan, with the oven area and surrounding cabinet outlines visible.", "intent": "Review the kitchen plan detail.", "app": "SketchUp 2024", "details": null}, {"start_s": 3882.582, "end_s": 3902.582, "action": "Continued reviewing the unchanged close view of the central kitchen plan without recorded interaction.", "intent": "Inspect the layout before further navigation.", "app": "SketchUp 2024", "details": null}, {"start_s": 3902.582, "end_s": 3919.659, "action": "Scrolled to zoom out from the close kitchen plan to a wider view showing multiple kitchen layouts, then continued scrolling near the end of the span.", "intent": "Compare the central plan with the surrounding model layouts.", "app": "SketchUp 2024", "details": null}, {"start_s": 3919.659, "end_s": 3939.659, "action": "Paused on the wider SketchUp view showing several kitchen layouts and the central plan with an oven symbol.", "intent": "Review the overall arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 3939.659, "end_s": 3959.659, "action": "Continued viewing the unchanged wider kitchen-layout model without recorded interaction.", "intent": "Inspect the model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 3959.659, "end_s": 3979.659, "action": "Remained idle in SketchUp while the workspace and system connection state resumed; the kitchen layout drawings stayed visible.", "intent": "Maintain the open SketchUp model after a system state change.", "app": "SketchUp 2024", "details": "No modeling interaction was observed."}, {"start_s": 3979.659, "end_s": 3997.05, "action": "Scrolled the SketchUp viewport to reposition and enlarge the central kitchen floor-plan drawing.", "intent": "Adjust the view for closer inspection of the kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 3997.05, "end_s": 4007.12, "action": "Continued scrolling around the central floor plan, then middle-clicked to switch into orbit navigation; the view shifted to an angled perspective.", "intent": "Inspect the kitchen model from a different view.", "app": "SketchUp 2024", "details": null}, {"start_s": 4007.12, "end_s": 4023.465, "action": "Middle-clicked and navigated the SketchUp viewport, then scrolled to reframe the kitchen plan and surrounding drawings.", "intent": "Reposition the model view for continued inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 4023.465, "end_s": 4031.265, "action": "Scrolled repeatedly to zoom toward the central kitchen plan, briefly hovering over an endpoint labeled in the kitchen DWG.", "intent": "Examine a specific endpoint and nearby kitchen geometry.", "app": "SketchUp 2024", "details": "The tooltip identified an endpoint in the kitchen millimeter DWG."}, {"start_s": 4031.265, "end_s": 4039.303, "action": "Clicked and dragged from the upper-right endpoint area to draw a rectangular outline along the top and right side of the kitchen plan; the rectangle preview showed a 600.00 mm dimension.", "intent": "Create a measured rectangular element on the kitchen layout.", "app": "SketchUp 2024", "details": "The final frame showed the rectangle still active with opposite-corner placement indicated."}, {"start_s": 4039.303, "end_s": 4050.417, "action": "Typed a space and \u201cR,\u201d then clicked twice near the upper-right corner of the floor-plan outline while the rectangle tool remained active.", "intent": "Continue drawing or positioning a rectangular element in the SketchUp model.", "app": "SketchUp 2024", "details": "The model showed a floor-plan layout with the rectangle tool prompt active."}, {"start_s": 4050.417, "end_s": 4059.489, "action": "Scrolled to zoom and reposition the floor plan, clicked near the right-side strip, and typed a space; the view ended with the right-side area enlarged and a rectangle preview active.", "intent": "Adjust the view and continue placing a rectangle along the right side of the plan.", "app": "SketchUp 2024", "details": "The Dimensions box showed 350.00 mm by 2186.90 mm during the active rectangle operation."}, {"start_s": 4059.489, "end_s": 4079.489, "action": "Clicked repeatedly on the right-side floor-plan strip, leaving several adjacent faces highlighted for selection, then right-clicked the selected area.", "intent": "Select multiple right-side faces for a subsequent modeling operation.", "app": "SketchUp 2024", "details": "The selected faces were highlighted in blue stippling."}, {"start_s": 4079.489, "end_s": 4089.578, "action": "Opened the context menu on the selected faces, dismissed it, clicked the right-side geometry repeatedly, typed \u201cP,\u201d and scrolled slightly.", "intent": "Access modeling commands and prepare the selected geometry for modification.", "app": "SketchUp 2024", "details": "The context menu included Push/Pull, Make Group, Intersect Faces, and other SketchUp commands."}, {"start_s": 4089.578, "end_s": 4100.529, "action": "Used middle-click orbiting and scrolling to change the camera from a top view to an angled 3D view, then manipulated the selected right-side geometry with the Push/Pull tool.", "intent": "Extrude the selected strip into 3D geometry and inspect the result.", "app": "SketchUp 2024", "details": "The selected strip became a raised rectangular wall-like extrusion; the distance field changed during the operation."}, {"start_s": 4100.529, "end_s": 4115.449, "action": "Scrolled to zoom farther out while keeping the extruded strip selected and the Push/Pull tool active.", "intent": "Review the extruded element in the context of the surrounding floor-plan models.", "app": "SketchUp 2024", "details": "The final view showed multiple floor-plan layouts and the raised selected element near the center."}, {"start_s": 4115.449, "end_s": 4135.449, "action": "Remained idle in SketchUp while viewing the architectural floor-plan model and an upright selected face; no interaction was recorded.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 4135.449, "end_s": 4153.274, "action": "Resumed the SketchUp session and pressed the spacebar; the model remained visible with the upright face and distance readout.", "intent": "Resume work and interact with the active modeling tool.", "app": "SketchUp 2024", "details": "System state changes indicated resume and connectivity/power changes before the keypress."}, {"start_s": 4153.274, "end_s": 4168.611, "action": "Scrolled repeatedly to zoom and reposition the SketchUp view, bringing the central floor plan and upright wall-like geometry closer into view.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 4168.611, "end_s": 4180.825, "action": "Scrolled and middle-clicked to orbit or adjust the camera, then continued scrolling to obtain a closer view of the long white segmented geometry beside the kitchen layout.", "intent": "Refine the camera view around the modeled geometry.", "app": "SketchUp 2024", "details": "A Windows Explorer window was also resized or moved near the end of the span."}, {"start_s": 4180.825, "end_s": 4198.027, "action": "Unhid the SketchUp view, scrolled to zoom out and then back in, and left the long segmented geometry visible beside the floor plan.", "intent": "Review the model from different zoom levels.", "app": "SketchUp 2024", "details": "The application was briefly hidden during the interval."}, {"start_s": 4198.027, "end_s": 4218.027, "action": "Clicked repeatedly on the long segmented face to select it, typed \u201cP,\u201d and clicked again; the face became highlighted and was pulled into a solid elongated form with a distance readout.", "intent": "Select and extrude the modeled face using the active Push/Pull tool.", "app": "SketchUp 2024", "details": "The final view shows the selected stippled face and newly visible side faces."}, {"start_s": 4218.027, "end_s": 4228.024, "action": "Entered 600 MM to set a distance, confirmed it, then resized and moved the Explorer window and adjusted the view; clicked to finish the operation.", "intent": "Set a 600 mm dimension and continue modeling.", "app": "SketchUp 2024", "details": "A long rectangular 3D element was visible in the model."}, {"start_s": 4228.024, "end_s": 4238.379, "action": "Navigated the SketchUp view with middle-button clicks and scrolling, then clicked and selected a wall-like rectangular element.", "intent": "Inspect the model and select a component for editing.", "app": "SketchUp 2024", "details": "The view showed multiple floor-plan layouts and 3D wall forms."}, {"start_s": 4238.379, "end_s": 4248.875, "action": "Selected the rectangular element, initiated Move, and navigated the view while positioning it; the distance readout changed during the move.", "intent": "Move the selected wall-like element within the model.", "app": "SketchUp 2024", "details": "The selected element remained outlined in blue while Move was active."}, {"start_s": 4248.875, "end_s": 4258.243, "action": "Continued the active move operation with clicks and extensive scrolling, changing the displayed distance and maintaining the selected geometry.", "intent": "Adjust the position of the selected model element.", "app": "SketchUp 2024", "details": "The camera was zoomed very close to the selected geometry."}, {"start_s": 4258.243, "end_s": 4268.456, "action": "Entered 700 MM as the move distance, confirmed it, and completed placement of the rectangular element; then clicked and dragged in the model.", "intent": "Place the selected element at a 700 mm offset.", "app": "SketchUp 2024", "details": "The element appeared in the upper 3D structure after placement."}, {"start_s": 4268.456, "end_s": 4281.489, "action": "Orbited and navigated the model with middle-button clicks and scrolling, moving from an overview toward a close view between large wall-like forms.", "intent": "Inspect the updated 3D model from different viewpoints.", "app": "SketchUp 2024", "details": "The final view was a close-up of adjacent white wall surfaces."}, {"start_s": 4281.489, "end_s": 4301.489, "action": "Clicked in the SketchUp model and made several scroll attempts while leaving the 3D view of the block-like structures essentially unchanged.", "intent": "Inspect or navigate the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 4301.489, "end_s": 4307.153, "action": "Dragged and repeatedly clicked the upper face of the horizontal model element, selecting the element and then its top face.", "intent": "Select geometry for editing.", "app": "SketchUp 2024", "details": "The upper horizontal element became highlighted with a selection bounding box, and its top face was later stippled blue."}, {"start_s": 4307.153, "end_s": 4317.283, "action": "Clicked the already selected top face again and left it selected.", "intent": "Maintain or confirm the face selection.", "app": "SketchUp 2024", "details": "The top face remained stippled blue within the selection box."}, {"start_s": 4317.283, "end_s": 4327.243, "action": "Typed P to activate Push/Pull for the selected face.", "intent": "Prepare to modify the selected face.", "app": "SketchUp 2024", "details": "The Push/Pull tool became active and the distance field showed 0.00 mm."}, {"start_s": 4327.243, "end_s": 4337.392, "action": "Clicked and navigated around the selected face, used Push/Pull, and produced a 20.00 mm offset before orbiting the model to a wider view.", "intent": "Extrude or adjust the selected model face.", "app": "SketchUp 2024", "details": "The selected face showed a Push/Pull preview at 20.00 mm, followed by a wider orbit view of the model."}, {"start_s": 4337.392, "end_s": 4344.074, "action": "Orbited and scrolled the SketchUp camera around the scene, moving from the character-and-model view to a wider perspective of the block structures and surrounding floor-plan outlines.", "intent": "Review the modified model from different viewpoints.", "app": "SketchUp 2024", "details": "The final view showed the white block structures, floor-plan linework, and the surrounding axes."}, {"start_s": 4344.074, "end_s": 4359.481, "action": "Orbit the SketchUp camera around the architectural model, changing from a wider view of multiple floor plans and walls to a closer view of the wall assembly.", "intent": "Inspect the 3D model from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 4359.481, "end_s": 4372.946, "action": "Orbit and zoom the camera toward the building corner, bringing the tall wall, low wall, and human scale figure into close view; resize an Explorer window while leaving the SketchUp view unchanged.", "intent": "Refine the model view for inspection.", "app": "SketchUp 2024", "details": "The final view closely frames the wall intersection and low counter-like structure."}, {"start_s": 4372.946, "end_s": 4384.138, "action": "Scroll within the SketchUp view to adjust the camera slightly while continuing to inspect the wall assembly.", "intent": "Review the current model geometry from the close viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 4384.138, "end_s": 4394.841, "action": "Orbit and zoom around the wall assembly, then activate a drawing tool and begin positioning a new rectangular element; type R during the operation.", "intent": "Adjust the viewpoint and begin drawing or modifying model geometry.", "app": "SketchUp 2024", "details": "The final frame shows an active drawing operation with purple inference points and a dimension readout."}, {"start_s": 4394.841, "end_s": 4407.329, "action": "Continue the active drawing operation by clicking and dragging across the model while orbiting and zooming; reposition the view around the exterior walls and extend the in-progress rectangular geometry.", "intent": "Create or size a rectangular wall-like element in the model.", "app": "SketchUp 2024", "details": "The view changes from a close corner to a wider exterior perspective, with the drawing cursor and dimension readouts visible."}, {"start_s": 4407.329, "end_s": 4417.737, "action": "Zoom and orbit around the model, click and drag along the wall surfaces, and select the resulting upper wall face or panel.", "intent": "Inspect and select the newly created wall geometry.", "app": "SketchUp 2024", "details": "The final view shows the upper wall panel highlighted in blue with the surrounding wall assembly and scale figure visible."}, {"start_s": 4417.737, "end_s": 4427.856, "action": "Navigated around the SketchUp model with orbiting and scrolling, then selected a horizontal wall or panel face, leaving it highlighted in blue.", "intent": "Inspect and select a model surface.", "app": "SketchUp 2024", "details": null}, {"start_s": 4427.856, "end_s": 4437.817, "action": "Zoomed toward the selected wall assembly, adjusted the view, and right-clicked the selected geometry before hiding the SketchUp window.", "intent": "Inspect the selected wall geometry and access its context options.", "app": "SketchUp 2024", "details": "The wall and adjacent side panel remained selected during the inspection."}, {"start_s": 4437.817, "end_s": 4446.201, "action": "Reoriented the camera from an exterior view into the modeled room, orbiting and zooming around the walls and floor layout.", "intent": "Inspect the interior arrangement from different viewpoints.", "app": "SketchUp 2024", "details": "The view changed from a distant overview to a close interior perspective."}, {"start_s": 4446.201, "end_s": 4452.871, "action": "Zoomed further into the interior corner and countertop-like wall assembly, bringing the surface and adjoining wall into close view.", "intent": "Examine the interior model details.", "app": "SketchUp 2024", "details": "System display and network status notifications appeared briefly during the view adjustment."}, {"start_s": 4452.871, "end_s": 4467.826, "action": "Scrolled to zoom back out from the close-up, revealing the larger room model and multiple surrounding floor-plan drawings.", "intent": "Review the model in the context of the broader layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 4467.826, "end_s": 4474.565, "action": "Orbited and zoomed around the room, moving from a close wall view to a wider perspective showing the interior walls and nearby plan drawings.", "intent": "Continue inspecting the room model from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 4474.565, "end_s": 4485.077, "action": "Resized and repositioned a Windows Explorer window while leaving the SketchUp model view unchanged.", "intent": "Adjust the surrounding window layout without modifying the model.", "app": "SketchUp 2024", "details": "SketchUp remained focused on a partially modeled room with surrounding floor plans."}, {"start_s": 4485.077, "end_s": 4495.685, "action": "Resized and repositioned the Windows Explorer window, then navigated the SketchUp camera with middle-click and scroll actions to pull back and reveal more of the model and nearby floor plans.", "intent": "Inspect the model in a wider context.", "app": "SketchUp 2024", "details": "The view changed from a close perspective to a distant overview."}, {"start_s": 4495.685, "end_s": 4508.492, "action": "Scrolled to zoom toward the modeled room and middle-clicked to adjust the camera, ending on a closer perspective of the walls and adjacent floor plans.", "intent": "Refine the inspection view of the room model.", "app": "SketchUp 2024", "details": "The room became larger in the viewport and the Orbit tool was active at the end."}, {"start_s": 4508.492, "end_s": 4517.383, "action": "Used repeated middle-click camera movements and scrolling to orbit and reposition around the room, changing from an angled overview to a more centered elevated view.", "intent": "Examine the room geometry from multiple angles.", "app": "SketchUp 2024", "details": "The modeled walls and blue upper surface remained unchanged."}, {"start_s": 4517.383, "end_s": 4522.213, "action": "Scrolled repeatedly to zoom in on the room\u2019s interior walls and corner, ending with a close inspection view.", "intent": "Inspect the interior wall arrangement more closely.", "app": "SketchUp 2024", "details": "The blue upper wall surface, white lower wall, and right-side corner filled most of the viewport."}, {"start_s": 4522.213, "end_s": 4542.213, "action": "Remained idle on the close SketchUp view of the modeled room interior.", "intent": "Pause while reviewing the current model view.", "app": "SketchUp 2024", "details": "No recorded interactions occurred during this interval."}, {"start_s": 4542.213, "end_s": 4554.29, "action": "Waited in SketchUp, then performed brief zero-distance scroll inputs while the model view remained on the corner wall assembly.", "intent": "Continue inspecting the SketchUp model.", "app": "SketchUp 2024", "details": "The view showed a selected blue wall panel above a white lower panel."}, {"start_s": 4554.29, "end_s": 4563.952, "action": "Clicked repeatedly on the upper blue panel, scrolled, typed \u201cR,\u201d and used middle-button navigation to adjust the model view; the panel remained selected and the camera moved closer.", "intent": "Inspect and navigate around the selected wall panel.", "app": "SketchUp 2024", "details": "The status bar indicated multiple selected objects, and the view ended in a close-up of the blue panel corner."}, {"start_s": 4563.952, "end_s": 4573.578, "action": "Scrolled extensively and used middle-button navigation to orbit or pan around the selected blue panel, ending at a close-up of its corner and adjacent gray surface.", "intent": "Examine the selected panel geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The blue panel remained stippled as selected; the tool cursor indicated orbit/navigation activity."}, {"start_s": 4573.578, "end_s": 4582.96, "action": "Scrolled to reposition the view, then clicked near the panel corner; the view moved away and the active drawing tool showed an \u201cOn Face\u201d inference before another click initiated the opposite-corner step.", "intent": "Position and begin a drawing operation on the model face.", "app": "SketchUp 2024", "details": "The Dimensions field displayed changing measurements, including 0.37 mm and 0.00 mm."}, {"start_s": 4582.96, "end_s": 4591.474, "action": "Scrolled repeatedly while the drawing tool remained active, adjusting the in-progress rectangle or face operation near the panel edge and showing \u201cOn Face Outside Active\u201d inference.", "intent": "Adjust the active drawing operation on the selected face.", "app": "SketchUp 2024", "details": "The Dimensions field changed during the operation, ending around 0.00 mm by 67.96 mm."}, {"start_s": 4591.474, "end_s": 4600.633, "action": "Scrolled to refine the view, then clicked twice near the lower-left corner of the blue panel; the active drawing operation updated to a small rectangular outline and showed \u201cFrom Point Outside Active.\u201d", "intent": "Continue defining geometry from the panel corner.", "app": "SketchUp 2024", "details": "The final Dimensions field showed approximately 38.02 mm by 58.06 mm."}, {"start_s": 4600.633, "end_s": 4613.225, "action": "Selected a small model element, opened its context menu, and moved toward the component-creation command before the menu closed.", "intent": "Prepare the selected geometry for conversion into a component.", "app": "SketchUp 2024", "details": "Context menu visibly included Make Component."}, {"start_s": 4613.225, "end_s": 4621.361, "action": "Opened the Create Component dialog, accepted it without visible edits, then returned to the model and selected the small geometry while activating a move operation.", "intent": "Create a component from the selected geometry and begin repositioning it.", "app": "SketchUp 2024", "details": "The dialog showed definition Component#1; subsequent model status indicated a move operation."}, {"start_s": 4621.361, "end_s": 4628.674, "action": "Continued moving the selected component along the model edge, using endpoint inference and adjusting the placement distance.", "intent": "Position the component precisely against the surrounding geometry.", "app": "SketchUp 2024", "details": "The move tool remained active and the distance readout changed during placement."}, {"start_s": 4628.674, "end_s": 4641.899, "action": "Moved the selected rectangular component farther upward along the edge, then brought it back toward the adjoining geometry while keeping the move operation active.", "intent": "Refine the component\u2019s location relative to the edge and adjacent face.", "app": "SketchUp 2024", "details": "The component stayed selected with the move distance changing from about 62 mm to 0 mm."}, {"start_s": 4641.899, "end_s": 4651.632, "action": "Selected and moved the rectangular component again, dragging it across the adjacent geometry and ending with the move tool still active.", "intent": "Continue adjusting the component placement.", "app": "SketchUp 2024", "details": "The selected component visibly shifted and the distance readout reached approximately 66.68 mm."}, {"start_s": 4651.632, "end_s": 4662.53, "action": "Orbited and zoomed the SketchUp view with middle-mouse navigation, then clicked near the placed geometry to inspect the result from a wider perspective.", "intent": "Review the component placement in the surrounding model.", "app": "SketchUp 2024", "details": "The final view showed two flat rectangular elements near the wall-floor corner."}, {"start_s": 4662.53, "end_s": 4672.72, "action": "Clicked and scrolled around the SketchUp model, changing the view from a corner close-up to a larger wall-and-floor area.", "intent": "Navigate and inspect the model view.", "app": "SketchUp", "details": null}, {"start_s": 4672.72, "end_s": 4684.561, "action": "Scrolled and repeatedly clicked a small floor-edge face, selecting it; activated the Move tool and began positioning the selected face.", "intent": "Select and prepare to move a model element.", "app": "SketchUp", "details": "The selected small rectangular face is highlighted and the Move tool is active."}, {"start_s": 4684.561, "end_s": 4693.68, "action": "Scrolled the view while moving/copying the selected face along the floor edge, then clicked to place the preview at the far corner.", "intent": "Place a copied model element along the edge.", "app": "SketchUp", "details": "The Move tool shows a distance of 401.98 mm and the element remains in placement mode."}, {"start_s": 4693.68, "end_s": 4700.962, "action": "Entered 50 and then 60 in the Measurements box, confirming each value to create repeated rectangular elements along the edge.", "intent": "Set the spacing for repeated copies.", "app": "SketchUp", "details": "The row of rectangular elements visibly extends along the floor edge."}, {"start_s": 4700.962, "end_s": 4710.482, "action": "Entered 70 and then 80 in the Measurements box, confirming each value and extending the repeated row farther across the edge.", "intent": "Continue extending the repeated elements with numeric spacing.", "app": "SketchUp", "details": "The repeated rectangles form a longer, evenly spaced line."}, {"start_s": 4710.482, "end_s": 4720.303, "action": "Entered 8, corrected the value to 90, and confirmed it; clicked near the far corner while the Move tool remained active, leaving the extended row visible.", "intent": "Finish another placement and adjust the repeated pattern.", "app": "SketchUp", "details": "The view shifts to a wider perspective of the long row along the floor-wall edge."}, {"start_s": 4720.303, "end_s": 4731.498, "action": "Exited the active tool, clicked the model, and scrolled to adjust the SketchUp view around the selected long surface and adjacent wall.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 4731.498, "end_s": 4741.472, "action": "Used middle-button navigation and scrolling to orbit and zoom from the close-up surface to a wider view of the corner, walls, and surrounding floor-plan geometry.", "intent": "Navigate the model to inspect the corner assembly in context.", "app": "SketchUp 2024", "details": null}, {"start_s": 4741.472, "end_s": 4751.25, "action": "Scrolled along the wall edge, then repeatedly clicked the row of small rectangular floor elements, leaving the visible row highlighted before pressing Escape.", "intent": "Select or inspect repeated model elements along the wall edge.", "app": "SketchUp 2024", "details": null}, {"start_s": 4751.25, "end_s": 4756.961, "action": "Continued clicking the small rectangular element at the near end of the row and then pressed Escape, leaving that element highlighted in the view.", "intent": "Inspect or select the end element of the repeated row.", "app": "SketchUp 2024", "details": null}, {"start_s": 4756.961, "end_s": 4776.961, "action": "Paused on the SketchUp model, then scrolled to zoom and reposition from the close-up row of rectangular elements to a wider view of the L-shaped wall assembly.", "intent": "Review the model and adjust the camera for a broader inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 4776.961, "end_s": 4787.073, "action": "Scrolled repeatedly to move from the wall base close-up to a wider perspective showing the wall assembly and multiple surrounding floor-plan outlines.", "intent": "Inspect the modeled structure in the context of the larger plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 4787.073, "end_s": 4796.841, "action": "Scrolled and middle-clicked within the SketchUp model, changing the camera from a wide view of several floor plans to a close-up of the 3D wall assembly.", "intent": "Navigate and inspect the model geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 4796.841, "end_s": 4806.369, "action": "Scrolled extensively to reposition the camera, then clicked and dragged on the left toolbar and continued scrolling, ending with a wider view of the floor plans and wall assembly.", "intent": "Adjust the view and interact with a modeling tool.", "app": "SketchUp 2024", "details": "The toolbar interaction left a dimension-related tool active."}, {"start_s": 4806.369, "end_s": 4816.602, "action": "Clicked two points on the central floor plan to continue placing a linear dimension, then scrolled back to a wider view while the dimension tool remained active.", "intent": "Measure a segment in the floor-plan model.", "app": "SketchUp 2024", "details": "The status bar indicated that a second point was being selected for a linear dimension."}, {"start_s": 4816.602, "end_s": 4826.992, "action": "Pressed Space and navigated with middle-clicks and scrolling, orbiting and zooming around the model from the floor-plan layout to an angled view of the 3D wall assembly.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2024", "details": "The view changed substantially while no clearly visible geometry edit was completed."}, {"start_s": 4826.992, "end_s": 4839.706, "action": "Scrolled to zoom in on the 3D wall assembly, paused, then scrolled again to adjust the framing and leave the assembly and adjacent floor plan visible.", "intent": "Review the 3D assembly and its surrounding plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 4839.706, "end_s": 4849.792, "action": "Used repeated middle-clicks and scrolling to orbit and zoom around the wall assembly and nearby floor plans, ending on a wider angled view of the model.", "intent": "Continue inspecting the model from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 4849.792, "end_s": 4859.533, "action": "Scrolled through the SketchUp model view while the camera remained focused on the wall and floor geometry.", "intent": "Review the modeled area from the current viewpoint.", "app": "SketchUp 2024", "details": "System configuration changes occurred during the span; no clear geometry edit was visible."}, {"start_s": 4859.533, "end_s": 4869.931, "action": "Orbited and zoomed toward the wall edge, then repeatedly clicked along the row of small rectangular elements and entered \u201cM\u201d.", "intent": "Inspect or select a repeated edge detail for editing.", "app": "SketchUp 2024", "details": "The view ended in a close-up of the repeated rectangular elements along the model edge."}, {"start_s": 4869.931, "end_s": 4882.794, "action": "Continued clicking and scrolling around the repeated edge detail, activated a copy/move operation, and adjusted the camera toward the far corner.", "intent": "Copy or reposition the selected model detail along the edge.", "app": "SketchUp 2024", "details": "SketchUp displayed the copy-placement cursor and a distance readout while the repeated elements remained visible."}, {"start_s": 4882.794, "end_s": 4889.59, "action": "Orbited and scrolled along the wall perimeter while keeping the copy/move operation active.", "intent": "Navigate to another placement location for the selected detail.", "app": "SketchUp 2024", "details": "The selected copied element and placement guide remained visible near the wall edge."}, {"start_s": 4889.59, "end_s": 4899.962, "action": "Clicked near the wall corner and orbited the view, leaving a rectangular element selected and the move tool active.", "intent": "Position or confirm the selected edge element at the corner.", "app": "SketchUp 2024", "details": "The selected element was highlighted in blue with a move/copy cursor and distance readout."}, {"start_s": 4899.962, "end_s": 4909.795, "action": "Scrolled and repeatedly clicked the selected rectangular element near the wall edge while adjusting its position with the move tool.", "intent": "Fine-tune the placement of the selected model element.", "app": "SketchUp 2024", "details": "The element remained highlighted in blue; the final distance readout was approximately 0.85 mm."}, {"start_s": 4909.795, "end_s": 4919.371, "action": "Clicked and scrolled around the selected rectangular face, then used middle-click navigation and began a keyboard entry.", "intent": "Navigate the SketchUp model and prepare an operation on the selected face.", "app": "SketchUp 2024", "details": "A small rectangular face remained selected while the view changed."}, {"start_s": 4919.371, "end_s": 4930.731, "action": "Clicked the selected face and activated the Rotate tool, then adjusted the rotation preview to approximately 38.3 degrees before pressing Escape.", "intent": "Rotate the selected rectangular face or object.", "app": "SketchUp 2024", "details": "The rotation protractor and handles were visible around the selected face."}, {"start_s": 4930.731, "end_s": 4940.172, "action": "Confirmed or adjusted the rotation, pressed Escape twice, and returned to the selected-face view after further clicks and keyboard input.", "intent": "Cancel or finish the rotation attempt and resume selection.", "app": "SketchUp 2024", "details": "The rotation preview disappeared and the rectangular face was again shown selected."}, {"start_s": 4940.172, "end_s": 4949.754, "action": "Activated Rotate on the selected face, adjusted the rotation preview to about 19.8 degrees, then pressed Escape and continued clicking the face.", "intent": "Attempt another rotation of the selected face.", "app": "SketchUp 2024", "details": "The rotation protractor was visible, followed by a return to the normal selected-face view."}, {"start_s": 4949.754, "end_s": 4960.17, "action": "Switched to Move, dragged the selected rectangular face or object, and left it positioned separately from the upper face while continuing the move operation.", "intent": "Move the selected rectangular object to a new location.", "app": "SketchUp 2024", "details": "The distance readout reached 100.78 mm and the moved face appeared lower in the model."}, {"start_s": 4960.17, "end_s": 4969.515, "action": "Navigated with middle-clicks and selected the lower rectangular face, clicking repeatedly around it and leaving it highlighted.", "intent": "Inspect and select the relocated rectangular face.", "app": "SketchUp 2024", "details": "Two rectangular faces were visible; the lower face was selected at the end."}, {"start_s": 4969.515, "end_s": 4979.691, "action": "Selected the rectangular face, activated the Rotate tool, set a rotation angle of 90 degrees, and applied the rotation.", "intent": "Rotate the selected rectangular face.", "app": "SketchUp 2024", "details": "The face visibly changed orientation while remaining selected."}, {"start_s": 4979.691, "end_s": 4989.979, "action": "Navigated around the model with middle-button orbiting and scrolling, then selected rectangular faces and began another tool interaction, entering M near the end.", "intent": "Inspect and adjust geometry in the SketchUp model.", "app": "SketchUp 2024", "details": "The view shifted between the room corner and selected floor faces."}, {"start_s": 4989.979, "end_s": 5000.282, "action": "Selected the rectangular face, orbited to a lower side view, and initiated a move operation on the face.", "intent": "Position the selected face within the model.", "app": "SketchUp 2024", "details": "The selected face remained highlighted and the Measurements field showed a distance of approximately 79.26 mm."}, {"start_s": 5000.282, "end_s": 5010.097, "action": "Orbited and zoomed through the room geometry, dragged the selected face near the corner, and continued navigating around the walls and floor.", "intent": "Inspect and reposition the selected geometry in context.", "app": "SketchUp 2024", "details": "The camera moved from a room-wide view to a close-up of a corner and floor surface."}, {"start_s": 5010.097, "end_s": 5016.812, "action": "Navigated with middle-button orbiting and scrolling, repeatedly clicked and dragged the small rectangular face at the wall-floor corner, and entered M.", "intent": "Adjust the small selected face at the corner.", "app": "SketchUp 2024", "details": "The small face stayed selected and changed apparent orientation with the camera view."}, {"start_s": 5016.812, "end_s": 5029.907, "action": "Paused with the small rectangular face selected, then entered a space and scrolled near the end of the span.", "intent": "Continue the active SketchUp geometry operation.", "app": "SketchUp 2024", "details": "No clear geometry change was visible during the interval."}, {"start_s": 5029.907, "end_s": 5040.004, "action": "Scrolled repeatedly through the SketchUp model and adjusted the view to inspect the arranged floor-plan drawings and the small 3D wall section.", "intent": "Inspect the overall model layout from different zoom levels.", "app": "SketchUp 2024", "details": null}, {"start_s": 5040.004, "end_s": 5045.694, "action": "Continued viewing the SketchUp model while the camera remained focused on the collection of floor-plan drawings; an Explorer window was briefly resized and moved.", "intent": "Review the model layout without editing geometry.", "app": "SketchUp 2024", "details": "Windows Explorer window resize and move events occurred near the end of the span."}, {"start_s": 5045.694, "end_s": 5060.915, "action": "Unhid the application, briefly hid it, then returned to SketchUp and scrolled to reposition the camera over the floor-plan drawings.", "intent": "Manage the application visibility and continue inspecting the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 5060.915, "end_s": 5068.347, "action": "Scrolled and middle-clicked in the SketchUp viewport to adjust the camera, shifting the floor-plan collection and 3D wall section within the view.", "intent": "Navigate around the model for visual inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 5068.347, "end_s": 5078.035, "action": "Scrolled repeatedly to zoom or reposition the SketchUp camera, leaving the floor-plan drawings visible at a smaller scale.", "intent": "Review the complete arrangement of model components.", "app": "SketchUp 2024", "details": null}, {"start_s": 5078.035, "end_s": 5090.667, "action": "Middle-clicked and scrolled to orbit and reposition the SketchUp camera, then continued adjusting the view as the floor plans and 3D wall section shifted across the viewport; an Explorer window was resized and moved near the end.", "intent": "Inspect the model from another camera angle and scale.", "app": "SketchUp 2024", "details": "The final viewport showed the floor-plan drawings and partial 3D wall section from a changed angle."}, {"start_s": 5090.667, "end_s": 5108.109, "action": "Scrolled within the SketchUp model view while displaying several architectural plan and elevation elements.", "intent": "Inspect the model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 5108.109, "end_s": 5118.499, "action": "Orbit-scrolled through the model, moving from a distant view of multiple building elements to a close-up of a room corner and adjacent plan geometry.", "intent": "Navigate to and inspect a specific model area.", "app": "SketchUp 2024", "details": null}, {"start_s": 5118.499, "end_s": 5129.211, "action": "Clicked repeatedly around a small corner component, typed M, and continued navigating the close-up view; the component became selected with the Move tool active.", "intent": "Select and prepare to move a small model component.", "app": "SketchUp 2024", "details": "A small rectangular component at the wall-floor corner was highlighted."}, {"start_s": 5129.211, "end_s": 5138.557, "action": "Moved the selected component along the edge and entered 60 followed by Enter, producing a repeated strip of rectangular elements extending across the edge.", "intent": "Create a regularly spaced repeated element using a measured move/copy.", "app": "SketchUp 2024", "details": "The Measurements box showed the entered value while the copied strip extended to the right."}, {"start_s": 5138.557, "end_s": 5147.859, "action": "Entered 50 and confirmed, then entered 45 and completed another repeated-distance input while the copied rectangular strip remained visible along the edge.", "intent": "Adjust or extend the repeated element spacing and distance.", "app": "SketchUp 2024", "details": "The Measurements box displayed 50 and later 45 during the active copy operation."}, {"start_s": 5147.859, "end_s": 5157.693, "action": "Exited the active copy operation, selected or repositioned the view, and orbited/zoomed out to review the completed rectangular strip wrapping along the room perimeter.", "intent": "Finish the repeated-element operation and inspect the result in context.", "app": "SketchUp 2024", "details": "The final view showed the repeated strip along two connected edges of the modeled room."}, {"start_s": 5157.693, "end_s": 5166.717, "action": "Navigated around the SketchUp model with repeated scroll inputs, clicked a narrow end face, and activated the Push/Pull tool; entered a partial distance value and adjusted the selected face.", "intent": "Modify the height or depth of a selected model face.", "app": "SketchUp", "details": "The model shows a long raised edge with a selected end face and Push/Pull distance readout."}, {"start_s": 5166.717, "end_s": 5176.397, "action": "Continued navigating and adjusting the model view, then selected the long edge region; resized an Explorer window and clicked the model again, leaving the edge geometry highlighted blue.", "intent": "Inspect and select the relevant model geometry for further editing.", "app": "SketchUp", "details": "The selected long row of rectangular segments is highlighted blue in the later view."}, {"start_s": 5176.397, "end_s": 5187.984, "action": "Clicked the selected geometry, entered a partial value, and repeatedly scrolled to zoom or orbit out, revealing more of the surrounding building model while keeping the Push/Pull tool active.", "intent": "Inspect the edited geometry in a wider model context.", "app": "SketchUp", "details": "The view expands to show surrounding walls and floor-plan geometry; the Push/Pull distance changes to about 530 mm."}, {"start_s": 5187.984, "end_s": 5197.94, "action": "Scrolled and middle-clicked to reposition the camera, then clicked and dragged on the narrow end face with the Push/Pull tool; continued navigating around the elongated structure and selected its end region.", "intent": "Adjust or inspect the extrusion from another viewpoint.", "app": "SketchUp", "details": "The camera shifts from a broad building view to a close-up of the long dark strip and its end face."}, {"start_s": 5197.94, "end_s": 5206.734, "action": "Scrolled and clicked the narrow end face, then continued zooming around the model; the selected face remained under the Push/Pull cursor and the displayed distance changed substantially.", "intent": "Continue modifying or checking the selected extrusion.", "app": "SketchUp", "details": "The close-up shows the end face beside a repeated row of rectangular edge segments, with distances around 209 mm and 697 mm visible."}, {"start_s": 5206.734, "end_s": 5216.381, "action": "Pressed Escape, scrolled to reposition the view, and clicked repeatedly along the row of rectangular faces, including a brief drag; left the Push/Pull tool active with the distance reset to 0.00 mm.", "intent": "Cancel the current adjustment and select or inspect adjacent faces.", "app": "SketchUp", "details": "The final close-up shows multiple parallel wall faces and the repeated edge row; no nonzero Push/Pull distance remains."}, {"start_s": 5216.381, "end_s": 5225.988, "action": "Clicked repeatedly on model faces and entered undo commands, then scrolled and clicked another face while the Push/Pull tool remained active; the view shifted along the edge of the modeled structure.", "intent": "Adjust the geometry using Push/Pull while inspecting nearby faces.", "app": "SketchUp 2024", "details": "Distance readouts changed from 0.00 mm to 158.00 mm."}, {"start_s": 5225.988, "end_s": 5236.286, "action": "Scrolled through the model, clicked a vertical face, entered an undo command, and used middle-button navigation to orbit to a wider view; the model showed several tall parallel panels beside a long segmented edge.", "intent": "Inspect and reposition the model while modifying or reviewing the selected geometry.", "app": "SketchUp 2024", "details": "Push/Pull distance reached 623.55 mm before the view was repositioned."}, {"start_s": 5236.286, "end_s": 5248.18, "action": "Orbited and scrolled around the structure, clicked near the base, and adjusted a small face with the active Push/Pull tool; the view moved from an interior corner to the long segmented edge and a vertical panel.", "intent": "Inspect and refine geometry around the base and adjacent edge.", "app": "SketchUp 2024", "details": "The final visible Push/Pull distance was 19.45 mm."}, {"start_s": 5248.18, "end_s": 5258.261, "action": "Scrolled and orbited around the tall panels, clicked a top face, and then switched to orbit navigation; the view moved upward and around the corner of the large blue-gray surface.", "intent": "Review the modeled panels and reposition the camera for continued editing.", "app": "SketchUp 2024", "details": "Push/Pull distance displayed approximately 691.88 mm before orbit mode became active."}, {"start_s": 5258.261, "end_s": 5267.348, "action": "Orbited and scrolled to a broader view, then repeatedly clicked faces on the large blue-gray surface and near the base of the vertical panels; selected faces became stippled while Push/Pull remained active.", "intent": "Select and adjust successive faces along the modeled wall or panel assembly.", "app": "SketchUp 2024", "details": "The view showed the long segmented edge and multiple vertical white panels."}, {"start_s": 5267.348, "end_s": 5276.879, "action": "Scrolled along the panel row and repeatedly clicked successive small faces near the segmented edge, extending the sequence of vertical white panels; the final view showed additional panels and a selected small face.", "intent": "Continue editing repeated geometry along the edge of the structure.", "app": "SketchUp 2024", "details": "The final Push/Pull distance readout was 0.78 mm."}, {"start_s": 5276.879, "end_s": 5296.879, "action": "Remained idle in SketchUp while viewing the modeled row of vertical rectangular elements.", "intent": "Pause while inspecting the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 5296.879, "end_s": 5307.023, "action": "Moved and resized a Windows Explorer window, scrolled repeatedly, then pressed an undo-related key while keeping the SketchUp model visible.", "intent": "Adjust the workspace and inspect the model view.", "app": "SketchUp 2024", "details": "The model view remained focused on the vertical elements and adjacent row of rectangular faces."}, {"start_s": 5307.023, "end_s": 5317.086, "action": "Clicked and dragged on model faces, pressed an undo-related key, and scrolled extensively to change the SketchUp view and selection.", "intent": "Inspect or adjust geometry around the vertical elements and adjacent faces.", "app": "SketchUp 2024", "details": "The selected face and Push/Pull tool remained active; the displayed distance changed during the interaction."}, {"start_s": 5317.086, "end_s": 5327.478, "action": "Clicked several model faces and scrolled repeatedly, then pressed an undo-related key while changing the camera view around the vertical elements and rectangular floor faces.", "intent": "Continue inspecting or adjusting the model geometry.", "app": "SketchUp 2024", "details": "A rectangular face near the base was highlighted in the resulting close view."}, {"start_s": 5327.478, "end_s": 5337.774, "action": "Scrolled through the SketchUp model, moving from the base area to the upper ends of the vertical elements and changing the visible Push/Pull distance.", "intent": "Inspect the height and upper faces of the modeled elements.", "app": "SketchUp 2024", "details": "The upper face of a right-side vertical element became selected and the distance field showed a large positive value."}, {"start_s": 5337.774, "end_s": 5348.231, "action": "Clicked and dragged on the upper model area, scrolled to reposition the view, and pressed Escape to end the active operation.", "intent": "Adjust or inspect the selected geometry and exit the current tool operation.", "app": "SketchUp 2024", "details": "The view ended on the lower portions of the vertical elements and the adjacent row of rectangular faces."}, {"start_s": 5348.231, "end_s": 5359.038, "action": "Clicked and scrolled through the SketchUp model while using the Push/Pull tool, bringing the view closer to the top edges of the repeated wall-like geometry.", "intent": "Inspect or adjust the 3D model geometry.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active and the distance field showed approximately 691.88 mm after the later clicks."}, {"start_s": 5359.038, "end_s": 5369.774, "action": "Clicked and dragged across faces near the base of the repeated vertical geometry, then continued clicking and scrolling to inspect adjacent faces; briefly pressed Escape.", "intent": "Select or modify individual model faces with Push/Pull.", "app": "SketchUp 2024", "details": "The view shifted to the lower ends of the vertical elements and adjacent rectangular strip faces; displayed distances included 8.28 mm and 1.83 mm."}, {"start_s": 5369.774, "end_s": 5379.317, "action": "Selected several adjacent rectangular faces along the strip beside the vertical elements, clicking and dragging across the row.", "intent": "Select multiple repeated faces for a modeling operation.", "app": "SketchUp 2024", "details": "A rectangular face near the base was visibly highlighted during the selection activity."}, {"start_s": 5379.317, "end_s": 5389.341, "action": "Clicked successive rectangular faces along the diagonal strip, extending the selected region across the row.", "intent": "Continue selecting repeated model faces.", "app": "SketchUp 2024", "details": "Many neighboring strip faces were highlighted with a dotted selection pattern."}, {"start_s": 5389.341, "end_s": 5399.775, "action": "Continued clicking successive faces farther along the diagonal strip and scrolled the view to follow the row.", "intent": "Extend the face selection across the remaining repeated geometry.", "app": "SketchUp 2024", "details": "The camera moved farther from the vertical wall section, leaving a long row of highlighted rectangular faces visible."}, {"start_s": 5399.775, "end_s": 5407.046, "action": "Clicked additional rectangular faces at the far end of the strip, briefly dragged across one face, and scrolled to reposition the view.", "intent": "Finish selecting faces along the repeated strip.", "app": "SketchUp 2024", "details": "The view ended focused on the long diagonal row, with many rectangular faces still highlighted."}, {"start_s": 5407.046, "end_s": 5415.3, "action": "Scrolled around the SketchUp model, dragged across the row of small rectangular elements, and clicked nearby elements, leaving the view zoomed in on the row.", "intent": "Inspect or select elements along the model edge.", "app": "SketchUp 2024", "details": null}, {"start_s": 5415.3, "end_s": 5424.956, "action": "Clicked successive small rectangular elements along the diagonal row in the SketchUp model.", "intent": "Select or inspect individual repeated elements.", "app": "SketchUp 2024", "details": null}, {"start_s": 5424.956, "end_s": 5434.47, "action": "Clicked another element and scrolled through the model, shifting the view toward the larger vertical panel and adjacent edge row.", "intent": "Navigate the model to inspect the repeated geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 5434.47, "end_s": 5443.999, "action": "Scrolled repeatedly across the SketchUp scene, panning the view along the long row of small rectangular elements and changing the visible model area.", "intent": "Review the placement and continuity of the repeated elements.", "app": "SketchUp 2024", "details": null}, {"start_s": 5443.999, "end_s": 5458.556, "action": "Scrolled through the model and used middle-click navigation, keeping the long rectangular-element row and surrounding surfaces in view.", "intent": "Adjust the 3D view for continued inspection.", "app": "SketchUp 2024", "details": "System configuration, network, power, input, and memory state changes were recorded during the interval."}, {"start_s": 5458.556, "end_s": 5478.556, "action": "Scrolled to zoom out and reframe the SketchUp model, revealing the larger room-like structure, the left vertical panel, and the long edge row.", "intent": "Obtain a broader view of the model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 5478.556, "end_s": 5491.263, "action": "Scrolled the SketchUp viewport without changing the visible model geometry.", "intent": "Adjust the 3D view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 5491.263, "end_s": 5511.263, "action": "Remained idle while the SketchUp model stayed visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 5511.263, "end_s": 5525.445, "action": "Scrolled the viewport and middle-clicked twice, changing to a closer view of the modeled wall and roof-edge area.", "intent": "Navigate and inspect the model from a different angle and scale.", "app": "SketchUp 2024", "details": null}, {"start_s": 5525.445, "end_s": 5536.745, "action": "Scrolled repeatedly to zoom and reposition the viewport, bringing the ribbed wall section and adjacent long gray surface into close view.", "intent": "Inspect the model detail closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 5536.745, "end_s": 5550.079, "action": "Pressed P to activate Push/Pull, then scrolled around the close-up model view while keeping the tool active.", "intent": "Prepare to modify or inspect a model face with Push/Pull.", "app": "SketchUp 2024", "details": null}, {"start_s": 5550.079, "end_s": 5564.487, "action": "Clicked the model face twice with Push/Pull active, then scrolled the viewport; the selected face was pulled to a distance of 706.02 mm, creating a raised block at the edge of the ribbed section.", "intent": "Extrude the selected model face.", "app": "SketchUp 2024", "details": "Push/Pull tool remained active and the distance field showed 706.02 mm."}, {"start_s": 5564.487, "end_s": 5574.813, "action": "Clicked repeatedly along the edge of the ribbed wall with the Push/Pull tool, extending the adjacent vertical faces into a taller ribbed section.", "intent": "Extend the modeled ribbed wall section.", "app": "SketchUp 2024", "details": "The ribbed geometry visibly grows toward the right across the span."}, {"start_s": 5574.813, "end_s": 5581.695, "action": "Clicked the next edge area, then scrolled to zoom out and used middle-clicks to adjust the view around the extended ribbed section.", "intent": "Continue the wall edit and inspect the surrounding model.", "app": "SketchUp 2024", "details": "The view changes from a close-up to a wider perspective showing the ribbed section and long adjacent strip."}, {"start_s": 5581.695, "end_s": 5590.713, "action": "Scrolled repeatedly to zoom and reposition the camera, revealing more of the surrounding floor and wall geometry.", "intent": "Review the edited section in the broader model context.", "app": "SketchUp 2024", "details": "The ribbed wall remains visible while the camera pulls back and shifts around it."}, {"start_s": 5590.713, "end_s": 5599.623, "action": "Scrolled farther out and used middle-clicks to orbit or reposition the model view, exposing the surrounding room-like structure and adjacent walls.", "intent": "Inspect the placement of the edited wall section.", "app": "SketchUp 2024", "details": "The camera transitions to a wider overhead perspective."}, {"start_s": 5599.623, "end_s": 5612.167, "action": "Scrolled and middle-clicked to orbit around the model, settling on a perspective that shows the ribbed wall, long blue-gray strip, and right-side wall assembly.", "intent": "Review the completed geometry from another angle.", "app": "SketchUp 2024", "details": "The Orbit tool is active during part of the span; no additional geometry change is visible."}, {"start_s": 5612.167, "end_s": 5632.167, "action": "Scrolled to zoom and reposition the camera, then left the model in a wider overview showing the ribbed wall section, surrounding floor plan, and right-side wall.", "intent": "Finalize the visual inspection of the edited model.", "app": "SketchUp 2024", "details": "No further geometry edits are visible during the stable interval."}, {"start_s": 5632.167, "end_s": 5642.245, "action": "Navigated around the SketchUp model with repeated scrolling and middle-click view adjustments, ending on a higher angled view of the wall and roof-like elements.", "intent": "Inspect the modeled structure from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 5642.245, "end_s": 5655.4, "action": "Pressed Escape, then continued scrolling and middle-click navigation to zoom and reposition the camera over the long blue-gray surface and adjacent walls.", "intent": "Refine the inspection view of the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 5655.4, "end_s": 5665.75, "action": "Scrolled to zoom closely onto the junction between the repeated white slats and the long blue-gray surface, then clicked repeatedly near that junction.", "intent": "Inspect or target the detailed geometry at the surface junction.", "app": "SketchUp 2024", "details": null}, {"start_s": 5665.75, "end_s": 5675.877, "action": "Continued clicking near the slat-to-surface boundary while scrolling and middle-clicking to adjust the close-up view; selected geometry became highlighted blue.", "intent": "Select or inspect repeated geometry along the boundary.", "app": "SketchUp 2024", "details": null}, {"start_s": 5675.877, "end_s": 5687.262, "action": "Clicked repeatedly on the highlighted boundary geometry, briefly dragged, then used middle-click navigation and scrolling to orbit back to a wider view of the structure.", "intent": "Work with and review the selected model geometry from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 5687.262, "end_s": 5700.109, "action": "Scrolled and clicked repeatedly along the close-up edge where the white slats meet the blue-gray surface, leaving a small edge component highlighted.", "intent": "Inspect or select individual edge components in the detailed model area.", "app": "SketchUp 2024", "details": null}, {"start_s": 5700.109, "end_s": 5710.189, "action": "Clicked repeatedly along the row of small rectangular faces, extending the selected or edited region toward the right.", "intent": "Continue selecting or modifying adjacent rectangular model faces.", "app": "SketchUp 2024", "details": "The SketchUp viewport showed a long diagonal row of rectangular faces, with many left-side faces stippled as selected."}, {"start_s": 5710.189, "end_s": 5720.229, "action": "Clicked across successive rectangular faces farther to the right and briefly scrolled, continuing along the diagonal row.", "intent": "Continue selecting or modifying the rectangular face sequence.", "app": "SketchUp 2024", "details": "The viewport remained focused on the diagonal strip; the selected stippled region extended through the clicked faces."}, {"start_s": 5720.229, "end_s": 5731.391, "action": "Clicked several more adjacent faces toward the right, then scrolled repeatedly to reposition the view along the model.", "intent": "Extend the ongoing face selection or modification while navigating the model.", "app": "SketchUp 2024", "details": "The long rectangular strip remained visible, with the stippled selection continuing along its left portion."}, {"start_s": 5731.391, "end_s": 5741.613, "action": "Clicked along the next section of the diagonal row and scrolled repeatedly; the view shifted so the strip filled more of the viewport.", "intent": "Continue working through the sequence of adjacent rectangular faces.", "app": "SketchUp 2024", "details": "The camera view changed substantially, showing the rectangular strip across the lower portion of the SketchUp viewport."}, {"start_s": 5741.613, "end_s": 5751.607, "action": "Clicked and briefly dragged on the rectangular strip, scrolled to reposition, then clicked several more faces along the lower-left portion.", "intent": "Continue selecting or editing faces while navigating along the strip.", "app": "SketchUp 2024", "details": "The strip remained diagonal; the visible stippled selection ended near the center-left while unselected faces continued to the right."}, {"start_s": 5751.607, "end_s": 5761.647, "action": "Clicked additional faces, briefly dragged, and scrolled repeatedly; the camera pulled back and shifted to reveal a larger surrounding model area and another connected row at the far right.", "intent": "Navigate and continue the face-selection or modeling operation along the rectangular strip.", "app": "SketchUp 2024", "details": "The final views showed the long strip receding toward a corner, with several nearer rectangular faces stippled as selected."}, {"start_s": 5761.647, "end_s": 5771.822, "action": "Clicked across the row of small rectangular faces and scrolled to reposition the SketchUp view, leaving several faces highlighted.", "intent": "Select and inspect successive rectangular model faces.", "app": "SketchUp 2024", "details": "The view remained focused on a long diagonal row of repeated rectangular faces."}, {"start_s": 5771.822, "end_s": 5782.175, "action": "Clicked successive rectangular faces along the diagonal row, briefly dragged, and scrolled to continue along the model.", "intent": "Continue selecting repeated faces in the SketchUp model.", "app": "SketchUp 2024", "details": "Selected faces appeared stippled while the camera view shifted toward the right end."}, {"start_s": 5782.175, "end_s": 5791.709, "action": "Clicked additional faces along the row, scrolled, and briefly dragged while advancing the view toward the corner.", "intent": "Continue working through the repeated rectangular faces.", "app": "SketchUp 2024", "details": "The diagonal row extended toward a corner and selected faces remained stippled."}, {"start_s": 5791.709, "end_s": 5801.773, "action": "Scrolled extensively to reposition the model, typed P, dragged on a face, then clicked another face; the Push/Pull tool became active and a face showed an extrusion preview.", "intent": "Use Push/Pull to modify a selected model face.", "app": "SketchUp 2024", "details": "The status bar indicated Push/Pull, with a distance readout visible after the face interaction."}, {"start_s": 5801.773, "end_s": 5812.125, "action": "Scrolled and clicked successive rectangular faces with Push/Pull active, moving along the base of the tall repeated panels.", "intent": "Apply or prepare repeated Push/Pull edits to model faces.", "app": "SketchUp 2024", "details": "The selected face and Push/Pull cursor remained visible; the distance readout later returned to 0.00 mm."}, {"start_s": 5812.125, "end_s": 5822.061, "action": "Clicked successive faces with Push/Pull active, scrolled to reposition the view, and continued selecting faces along the panel row.", "intent": "Continue repeated Push/Pull face editing in the SketchUp model.", "app": "SketchUp 2024", "details": "A stippled vertical face was selected among the tall white panels, with the Push/Pull tool still active."}, {"start_s": 5822.061, "end_s": 5832.074, "action": "Clicked successive faces along the edge of the ribbed SketchUp structure with the Push/Pull tool, extending the modeled section incrementally.", "intent": "Extend the repeated structural geometry along the edge.", "app": "SketchUp 2024", "details": "The ribbed wall and adjacent row of small rectangular faces remained visible while the endpoint advanced to the right."}, {"start_s": 5832.074, "end_s": 5841.697, "action": "Continued clicking successive faces with Push/Pull, then adjusted the view with middle-button navigation and scrolling; extended the right end of the ribbed structure.", "intent": "Continue modeling the repeated wall geometry and inspect its endpoint.", "app": "SketchUp 2024", "details": "The rightmost section became taller/extended, and the view shifted to a more front-facing endpoint view."}, {"start_s": 5841.697, "end_s": 5851.584, "action": "Clicked the endpoint face, zoomed and orbited/panned around the model, and reviewed the elongated ribbed wall and adjacent blue surface.", "intent": "Inspect the modeled extension and reposition the view for further work.", "app": "SketchUp 2024", "details": "The camera moved from a close endpoint view to a wider view showing the full repeated wall and adjoining surface."}, {"start_s": 5851.584, "end_s": 5862.704, "action": "Orbited and scrolled through the model, clicked a face near the base of the ribbed wall, and used Push/Pull to adjust the selected rectangular face; navigated back toward the wall\u2019s upper edge.", "intent": "Modify a selected face and inspect the resulting geometry from different angles.", "app": "SketchUp 2024", "details": "The Push/Pull distance field visibly showed 18.19 mm during the face adjustment and later approximately 691.88 mm while navigating."}, {"start_s": 5862.704, "end_s": 5872.232, "action": "Scrolled and clicked successive faces across the adjoining blue surface and along the wall endpoint, advancing the Push/Pull target across the repeated geometry.", "intent": "Continue extending or editing the adjoining modeled section face by face.", "app": "SketchUp 2024", "details": "The blue surface was selected during part of the span, and the endpoint face was repeatedly targeted as the view remained close to the wall base."}, {"start_s": 5872.232, "end_s": 5881.867, "action": "Clicked additional faces farther along the adjoining row, scrolled to reposition the view, then clicked near the wall endpoint and issued a control-key event.", "intent": "Continue face-by-face modeling while repositioning the SketchUp view.", "app": "SketchUp 2024", "details": "The final view showed the full ribbed wall ending beside a long row of small rectangular faces."}, {"start_s": 5881.867, "end_s": 5885.922, "action": "Clicked repeatedly on the model with the Push/Pull tool, entered an undo keystroke, then scrolled to adjust the 3D view; the view ended with a long row of vertical slats and small floor tiles visible.", "intent": "Modify or inspect the modeled slatted structure.", "app": "SketchUp 2024", "details": "Push/Pull tool remained active; the displayed distance changed to approximately 8.12 mm."}, {"start_s": 5885.922, "end_s": 5902.317, "action": "Paused on the SketchUp model while an Explorer window was resized and moved near the taskbar; the slatted structure remained visible and the Push/Pull tool stayed active.", "intent": "Continue working in the model while adjusting the desktop window layout.", "app": "SketchUp 2024", "details": "The Push/Pull distance display later showed approximately 691.88 mm."}, {"start_s": 5902.317, "end_s": 5907.345, "action": "Remained on the same SketchUp view while network status changed and an Explorer window was resized and moved; no modeling result visibly changed.", "intent": "Wait while the desktop environment settled.", "app": "SketchUp 2024", "details": "No direct SketchUp interaction was recorded."}, {"start_s": 5907.345, "end_s": 5918.692, "action": "Waited on the slatted model, then scrolled and middle-clicked to adjust the camera, bringing the upper edge and right end of the structure into a closer view.", "intent": "Reposition the 3D camera to inspect the model.", "app": "SketchUp 2024", "details": "System resume and configuration changes occurred before the camera adjustment."}, {"start_s": 5918.692, "end_s": 5926.186, "action": "Middle-clicked and scrolled repeatedly to orbit or pan around the model, moving from a close view of the slatted wall to a wider view of the wall, floor, and surrounding edges.", "intent": "Inspect the modeled structure from different viewpoints.", "app": "SketchUp 2024", "details": "Push/Pull tool remained selected, but no confirmed geometry change was visible."}, {"start_s": 5926.186, "end_s": 5946.186, "action": "Remained idle in SketchUp with the camera fixed on the slatted wall, tiled edge, and floor area.", "intent": "Pause while reviewing the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 5946.186, "end_s": 5956.17, "action": "Scrolled around the SketchUp model, then repeatedly clicked adjacent rectangular faces along the edge with the Push/Pull tool active.", "intent": "Extend or inspect successive model faces.", "app": "SketchUp 2024", "details": "The selected face remained at 0.00 mm in the visible status field."}, {"start_s": 5956.17, "end_s": 5967.283, "action": "Clicked successive rectangular faces along the perimeter, scrolled and adjusted the view, then middle-clicked to switch to orbit navigation.", "intent": "Continue working across the repeated perimeter faces and reposition the model view.", "app": "SketchUp 2024", "details": "The view changed to show the perimeter continuing around a corner."}, {"start_s": 5967.283, "end_s": 5975.546, "action": "Middle-clicked and briefly pressed an undo-like key, clicked a face, scrolled to a wider view, and clicked another face with Push/Pull active.", "intent": "Navigate the model and continue selecting or modifying the repeated wall faces.", "app": "SketchUp 2024", "details": "The wider view revealed a long wall of repeated vertical elements and surrounding block geometry."}, {"start_s": 5975.546, "end_s": 5985.195, "action": "Scrolled and middle-clicked to reposition the view, then clicked a rectangular perimeter face repeatedly.", "intent": "Inspect the perimeter and work on another repeated face.", "app": "SketchUp 2024", "details": "The selected face became a tall highlighted vertical face in the final evidence."}, {"start_s": 5985.195, "end_s": 5995.234, "action": "Clicked successive rectangular faces along the perimeter, scrolled to advance the view, and selected another face near the corner.", "intent": "Continue extending or checking adjacent repeated faces.", "app": "SketchUp 2024", "details": "The model remained in the close-up Push/Pull workflow with the selected face showing 0.00 mm."}, {"start_s": 5995.234, "end_s": 6004.188, "action": "Clicked several more adjacent perimeter faces, including a brief drag, then scrolled to reposition the view.", "intent": "Continue working along the repeated edge faces of the model.", "app": "SketchUp 2024", "details": "The final view showed the selected face farther along the perimeter beside the extended vertical wall elements."}, {"start_s": 6004.188, "end_s": 6013.61, "action": "Scrolled and adjusted the SketchUp view around the repeated wall faces, then selected a narrow vertical face with the Push/Pull tool.", "intent": "Inspect and prepare a wall face for modification.", "app": "SketchUp 2024", "details": "The selected face was highlighted and the distance field showed approximately 691.88 mm."}, {"start_s": 6013.61, "end_s": 6024.009, "action": "Navigated to the lower wall and floor area, selected a small floor face, and push-pulled it upward to form a short rectangular block.", "intent": "Create or adjust a small raised feature beside the wall.", "app": "SketchUp 2024", "details": "The final visible Push/Pull distance was 30.78 mm."}, {"start_s": 6024.009, "end_s": 6033.802, "action": "Repositioned the camera around the model, selected a face near the wall edge, and orbited outward to review the repeated wall and adjacent structure.", "intent": "Inspect the model from different angles after the geometry adjustment.", "app": "SketchUp 2024", "details": "The view changed from a close wall view to a wider perspective of the room-like model."}, {"start_s": 6033.802, "end_s": 6044.13, "action": "Orbited and zoomed around the corner, then selected several narrow wall or floor faces with the active Push/Pull tool.", "intent": "Continue inspecting and targeting individual faces for modeling edits.", "app": "SketchUp 2024", "details": "The selected face remained at 0.00 mm in the later view."}, {"start_s": 6044.13, "end_s": 6053.942, "action": "Navigated to the opposite corner, selected a small floor face near the repeated wall, and adjusted it with Push/Pull while reviewing the surrounding row of floor tiles.", "intent": "Modify a small corner feature and check its alignment with the model.", "app": "SketchUp 2024", "details": "The later Push/Pull distance shown was 2.97 mm."}, {"start_s": 6053.942, "end_s": 6063.825, "action": "Orbited and zoomed upward along the repeated wall elements, selected a large adjacent face, and reviewed the resulting model from an elevated angle.", "intent": "Inspect the wall assembly and surrounding geometry.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active; the distance field reached approximately 670.83 mm before the final wide view."}, {"start_s": 6063.825, "end_s": 6073.37, "action": "Scrolled within the SketchUp model, then repeatedly clicked adjacent floor faces near the wall while the Push/Pull tool remained active.", "intent": "Select successive faces for possible Push/Pull editing.", "app": "SketchUp 2024", "details": "The clicked face became highlighted; no visible extrusion distance was entered."}, {"start_s": 6073.37, "end_s": 6093.37, "action": "Clicked the next adjacent floor face several times with the Push/Pull tool, leaving that face highlighted and the model otherwise unchanged.", "intent": "Continue selecting adjacent faces for Push/Pull editing.", "app": "SketchUp 2024", "details": "The selected face appears at the base of the wall near the row of rectangular floor faces."}, {"start_s": 6093.37, "end_s": 6113.37, "action": "Paused with the selected wall-adjacent face visible in SketchUp; no modeling interaction was evident during the interval.", "intent": "Review the current model state.", "app": "SketchUp 2024", "details": "System state changes occurred near the end of the interval, but no visible UI action followed."}, {"start_s": 6113.37, "end_s": 6133.37, "action": "Scrolled to change the 3D view, then clicked the wall-adjacent floor face and left it highlighted.", "intent": "Reposition the view and select a face for further modeling.", "app": "SketchUp 2024", "details": "The camera moved to a wider angled view of the room and wall panels."}, {"start_s": 6133.37, "end_s": 6143.817, "action": "Scrolled and middle-dragged/orbited around the model, changing from a close wall view to an angled view; clicked faces while the Push/Pull tool showed a distance of approximately 672.63\u2013693.22 mm.", "intent": "Inspect and adjust the 3D view while manipulating a selected face.", "app": "SketchUp 2024", "details": "The view shifted around the wall and repeated rectangular floor elements; the visible distance field changed during the interaction."}, {"start_s": 6143.817, "end_s": 6153.487, "action": "Middle-dragged and scrolled to orbit and zoom out, clicked several wall-panel faces, briefly issued an undo keystroke, and ended with a vertical panel face highlighted.", "intent": "Inspect the model and select or adjust a wall panel with Push/Pull.", "app": "SketchUp 2024", "details": "The final view showed a wider room perspective, and the selected panel remained highlighted with a displayed distance of approximately 693.22 mm."}, {"start_s": 6153.487, "end_s": 6163.281, "action": "Scrolled and clicked repeatedly on adjacent faces while using the Push/Pull tool, then pressed Escape to cancel or exit the active operation.", "intent": "Adjust or inspect the modeled wall and floor geometry.", "app": "SketchUp 2024", "details": "The view moved from an exterior perspective to a close-up of the slatted wall and a row of floor faces."}, {"start_s": 6163.281, "end_s": 6172.887, "action": "Clicked repeatedly on a face with Push/Pull active, briefly canceled and reactivated the operation, then orbited the model to a wider view.", "intent": "Modify and inspect the selected architectural face.", "app": "SketchUp 2024", "details": "The Push/Pull distance shown reached about 227.20 mm before the view was orbited."}, {"start_s": 6172.887, "end_s": 6182.713, "action": "Orbited and zoomed around the model, selected a face near the slatted wall, and dragged it with Push/Pull while continuing to adjust the view.", "intent": "Shape the wall or opening geometry and inspect the result from different angles.", "app": "SketchUp 2024", "details": "The view alternated between close-ups of the slats and a wider perspective of the wall, opening, and floor."}, {"start_s": 6182.713, "end_s": 6193.945, "action": "Paused on the close-up model view and made several small scroll adjustments to reposition the camera around the slatted wall and adjacent row of faces.", "intent": "Inspect the current geometry and camera framing.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible during this interval."}, {"start_s": 6193.945, "end_s": 6204.031, "action": "Clicked successive adjacent floor or edge faces with the Push/Pull tool, progressing from left to right along the row.", "intent": "Apply or prepare repeated face adjustments along the modeled edge.", "app": "SketchUp 2024", "details": "The selected face moved across the row of small rectangular faces beside the slatted wall."}, {"start_s": 6204.031, "end_s": 6214.015, "action": "Clicked successive faces farther along the row, scrolled and orbited to a wider perspective, then clicked additional adjacent faces near the wall.", "intent": "Continue repeated modeling adjustments while checking the overall result.", "app": "SketchUp 2024", "details": "The final view showed the slatted wall, rectangular opening, floor, and the row of small faces extending along the edge."}, {"start_s": 6214.015, "end_s": 6223.727, "action": "Clicked successive narrow faces and scrolled the SketchUp view, then selected a small face near the base of the wall for Push/Pull.", "intent": "Continue modifying repeated wall or trim geometry.", "app": "SketchUp 2024", "details": "The selected face showed a Push/Pull distance of 61.90 mm."}, {"start_s": 6223.727, "end_s": 6233.687, "action": "Scrolled and navigated around the model with middle-clicks, then selected another narrow vertical face and zoomed out to review the wall section.", "intent": "Inspect the repeated wall geometry and position the view for further editing.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active and displayed an approximate distance of 693.22 mm."}, {"start_s": 6233.687, "end_s": 6243.175, "action": "Scrolled slightly and clicked successive small base faces from left to right, selecting and adjusting repeated elements along the wall edge.", "intent": "Apply or inspect repeated edits across the row of wall-base faces.", "app": "SketchUp 2024", "details": "The selected faces were shown with Push/Pull feedback, including distances of 0.00 mm and 6.48 mm."}, {"start_s": 6243.175, "end_s": 6253.271, "action": "Undid once, selected a face, navigated and zoomed out with scrolling and middle-clicks, then switched to orbit navigation and reviewed the overall model.", "intent": "Reposition the camera and inspect the edited wall section in the broader model.", "app": "SketchUp 2024", "details": "The view changed from a close-up wall section to an elevated overall view."}, {"start_s": 6253.271, "end_s": 6263.689, "action": "Orbited and scrolled far away from the wall, revealing the complete building model and surrounding construction lines, then continued orbiting to review it.", "intent": "Inspect the model from a distant exterior viewpoint.", "app": "SketchUp 2024", "details": "The model appeared small against the blue sky background with multiple surrounding plan outlines."}, {"start_s": 6263.689, "end_s": 6273.751, "action": "Orbited and scrolled back to the wall section, then clicked successive narrow faces and dragged on one face to continue the repeated Push/Pull edits.", "intent": "Return to the wall detail and continue modifying its repeated vertical elements.", "app": "SketchUp 2024", "details": "The final view showed a selected base face beside the row of narrow wall faces."}, {"start_s": 6273.751, "end_s": 6284.295, "action": "Exited the active operation, selected the narrow face at the edge of the slatted wall, and orbited the SketchUp camera to reveal the surrounding room geometry.", "intent": "Inspect the model and reposition the view around the slatted wall.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active and the view changed from a close-up of the slats to a wider interior view."}, {"start_s": 6284.295, "end_s": 6290.599, "action": "Orbited and zoomed toward the right side of the slatted wall, then selected a narrow vertical face and adjusted it with the Push/Pull tool to roughly 692\u2013693 mm.", "intent": "Modify the narrow wall face to match a measured depth or height.", "app": "SketchUp 2024", "details": "The selected face is shown beside a light-blue opening, with the distance field reading approximately 691\u2013693 mm."}, {"start_s": 6290.599, "end_s": 6307.007, "action": "Scrolled and orbited around the model while keeping the narrow slatted face selected, ending on a wider view of the wall and adjacent opening.", "intent": "Review the modified geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The Push/Pull distance remained approximately 693.22 mm while the camera moved to an oblique room view."}, {"start_s": 6307.007, "end_s": 6317.265, "action": "Orbited upward and outward, selected the light-blue face beside the slatted wall, dragged it briefly, and clicked nearby faces while undoing or canceling intermediate operations.", "intent": "Inspect and refine the geometry around the opening and wall base.", "app": "SketchUp 2024", "details": "The view alternated between an overhead room view and a close-up of the selected opening-side face; a small distance of about 6.76 mm appeared during the final operation."}, {"start_s": 6317.265, "end_s": 6325.673, "action": "Clicked the wall and opening faces, orbited and zoomed toward the upper-right corner, then selected the top edge area of the light-blue opening and began another adjustment.", "intent": "Position the view and prepare the opening-side geometry for editing.", "app": "SketchUp 2024", "details": "The final view shows the slatted wall meeting the light-blue opening beneath a gray horizontal surface."}, {"start_s": 6325.673, "end_s": 6337.751, "action": "Orbited and zoomed around the right-side opening, then clicked the lower corner and adjacent faces to inspect or select the boundary geometry.", "intent": "Review the corner connection between the slatted wall, opening, and floor.", "app": "SketchUp 2024", "details": "The final close-up shows the light-blue opening, slatted wall, gray floor, and selected lower corner with the distance field at 0.00 mm."}, {"start_s": 6337.751, "end_s": 6347.591, "action": "Clicked repeatedly along adjacent faces with the Push/Pull tool, extending the narrow vertical wall elements across the right side of the model.", "intent": "Extend the repeated wall or slat geometry.", "app": "SketchUp 2024", "details": "The selected face highlights and the repeated vertical elements visibly extend toward the right."}, {"start_s": 6347.591, "end_s": 6357.591, "action": "Clicked additional adjacent faces to continue the wall extension, then hid the application and later returned to SketchUp while changing the view to a wider model overview.", "intent": "Continue modeling the wall and inspect the overall result.", "app": "SketchUp 2024", "details": "The final view shows the modeled room section with surrounding floor-plan linework."}, {"start_s": 6357.591, "end_s": 6367.998, "action": "Orbited and adjusted the camera around the modeled room, moving from a wider overview to closer interior views of the slatted wall, low wall, and tall wall.", "intent": "Inspect the modeled geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": "Middle-mouse orbiting changes the perspective without visibly editing geometry."}, {"start_s": 6367.998, "end_s": 6375.991, "action": "Continued orbiting and zooming out to view the room section from above and at an angle, bringing the surrounding floor-plan outlines into view.", "intent": "Review the room layout and its relationship to nearby plan geometry.", "app": "SketchUp 2024", "details": "The model remains unchanged while the camera shifts to a broader perspective."}, {"start_s": 6375.991, "end_s": 6390.057, "action": "Paused on the angled overview, then scrolled to zoom farther out and reveal more of the surrounding floor-plan drawings.", "intent": "Inspect the completed room section in the broader model context.", "app": "SketchUp 2024", "details": "The modeled section becomes smaller in frame as additional plan layouts appear around it."}, {"start_s": 6390.057, "end_s": 6395.55, "action": "Orbited and zoomed back toward the modeled room, ending on a closer view of the low wall, slatted wall, and tall wall junction.", "intent": "Refine the inspection view of the modeled area.", "app": "SketchUp 2024", "details": "No geometry edits are visible; only camera navigation changes the view."}, {"start_s": 6395.55, "end_s": 6415.55, "action": "Remained in SketchUp with the architectural model view unchanged while system configuration, network, power, input-source, and memory-pressure states changed.", "intent": "Maintain the current modeling session while system conditions changed.", "app": "SketchUp 2024", "details": "No direct modeling interaction was recorded."}, {"start_s": 6415.55, "end_s": 6435.55, "action": "Scrolled repeatedly and used middle-click navigation to orbit the SketchUp camera, changing from a close corner view to a wider perspective showing the wall assembly and surrounding floor-plan outlines.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2024", "details": "The model geometry remained unchanged."}, {"start_s": 6435.55, "end_s": 6447.859, "action": "Scrolled to zoom farther out, reducing the architectural model and revealing several surrounding plan layouts and the scene axes.", "intent": "Review the model in the context of the broader drawing.", "app": "SketchUp 2024", "details": "No geometry edits were visible."}, {"start_s": 6447.859, "end_s": 6467.859, "action": "Scrolled to zoom back in toward the corner of the modeled structure, leaving a close view of the wall, vertical element, and adjacent floor-plan lines.", "intent": "Inspect the corner detail more closely.", "app": "SketchUp 2024", "details": "No object selection or editing was visible."}, {"start_s": 6467.859, "end_s": 6487.859, "action": "Paused with the close SketchUp view displayed and made no recorded interaction.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": "The view remained static."}, {"start_s": 6487.859, "end_s": 6497.594, "action": "Scrolled and middle-clicked to orbit and zoom out, then adjusted the camera to a wider oblique view of the wall assembly and nearby plan outlines.", "intent": "Navigate to and inspect another overall model viewpoint.", "app": "SketchUp 2024", "details": "The final view showed the model structure at left and plan geometry to the right; no geometry changes were visible."}, {"start_s": 6497.594, "end_s": 6517.594, "action": "Clicked in the SketchUp model and issued several scroll inputs; the 3D view remained focused on the white counter, slatted wall, and adjacent tall structure.", "intent": "Adjust or inspect the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 6517.594, "end_s": 6537.594, "action": "Remained idle while the SketchUp model view stayed unchanged.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 6537.594, "end_s": 6545.7, "action": "Issued repeated scroll inputs to zoom out from the close-up model view, revealing the surrounding floor-plan outlines, then clicked near the taskbar.", "intent": "Change the model viewpoint to inspect the broader layout.", "app": "SketchUp 2024", "details": "System configuration and network-related state changes were recorded during the transition."}, {"start_s": 6545.7, "end_s": 6556.248, "action": "Switched back to the SketchUp window and issued repeated scroll inputs, zooming farther out to show the modeled structure alongside several floor-plan drawings.", "intent": "Review the model in relation to the broader drawing layout.", "app": "SketchUp 2024", "details": "The active window was identified as the recorder."}, {"start_s": 6556.248, "end_s": 6568.823, "action": "Middle-clicked and scrolled to navigate the 3D view, zooming back toward the modeled counter and slatted wall; finished with another middle-click that produced a close-up view.", "intent": "Refine the camera position for a closer inspection of the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 6568.823, "end_s": 6588.823, "action": "Middle-clicked and issued additional scroll inputs, bringing the view into an extreme close-up of the white counter face and slatted wall.", "intent": "Inspect the model's counter and wall details closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 6588.823, "end_s": 6596.832, "action": "Scrolled and middle-clicked in the SketchUp model, changing the view from a close corner perspective to a wider view of the counter, slatted wall, and tall block.", "intent": "Inspect the modeled kitchen area from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 6596.832, "end_s": 6608.381, "action": "Scrolled and middle-clicked again to adjust the 3D viewpoint, settling on a wider perspective that also showed the floor plan to the right.", "intent": "Continue inspecting the model geometry and surrounding layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 6608.381, "end_s": 6617.749, "action": "Orbit-adjusted the model with middle-clicks and scrolling, then switched to a closer front-facing view of the counter and slatted wall.", "intent": "Examine the counter and wall features more closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 6617.749, "end_s": 6627.806, "action": "Repeatedly clicked along the upper edge of the counter while zooming in, bringing the edge and adjacent slatted wall into close view.", "intent": "Select or inspect geometry along the counter edge.", "app": "SketchUp 2024", "details": null}, {"start_s": 6627.806, "end_s": 6636.631, "action": "Continued clicking along the counter edge and scrolling around the close-up, ending with the long upper strip and its edge highlighted in blue.", "intent": "Work on selecting the long counter-edge geometry.", "app": "SketchUp 2024", "details": "The final view shows the long strip selected."}, {"start_s": 6636.631, "end_s": 6646.15, "action": "Clicked repeatedly along the selected upper strip, pressed the spacebar, then clicked and dragged near the counter edge while slightly scrolling the view.", "intent": "Modify or manipulate the selected counter-edge geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 6646.15, "end_s": 6657.655, "action": "Navigated around the SketchUp model with scrolls, middle-clicks, and a brief drag, changing the view across several architectural floor-plan layouts and a partial 3D structure.", "intent": "Inspect the overall model and reposition the camera.", "app": "SketchUp", "details": null}, {"start_s": 6657.655, "end_s": 6666.512, "action": "Scrolled to adjust the SketchUp camera, zooming and repositioning the view to show the 3D structure and multiple surrounding floor plans.", "intent": "Review the model layout from a wider perspective.", "app": "SketchUp", "details": null}, {"start_s": 6666.512, "end_s": 6673.272, "action": "Used middle-click navigation and scrolling to orbit or reposition the camera, keeping the 3D structure and floor-plan drawings in view.", "intent": "Refine the model viewpoint for inspection.", "app": "SketchUp", "details": null}, {"start_s": 6673.272, "end_s": 6683.992, "action": "Scrolled and middle-clicked to navigate from the wider layout into a close view of the architectural structure, ending inside a room-like area with walls and a striped upper surface visible.", "intent": "Move from the overall layout to inspect a specific modeled area.", "app": "SketchUp", "details": null}, {"start_s": 6683.992, "end_s": 6693.798, "action": "Continued scrolling and middle-click navigation around the close-up room geometry, then clicked the wall area several times without a clearly visible modeling change.", "intent": "Inspect the wall and surrounding geometry closely.", "app": "SketchUp", "details": null}, {"start_s": 6693.798, "end_s": 6707.077, "action": "Clicked the close-up wall geometry repeatedly, opened its context menu showing options such as Entity Info, Erase, Hide, and Make Group, then dismissed the menu; the SketchUp window was hidden near the end.", "intent": "Inspect or prepare to manipulate the selected wall geometry.", "app": "SketchUp", "details": "A context menu was opened on the selected wall; no menu command was visibly chosen."}, {"start_s": 6707.077, "end_s": 6715.743, "action": "Opened the context menu on the model edge, reviewed its options, dismissed it, and began navigating the SketchUp view.", "intent": "Inspect the selected model edge and adjust the view.", "app": "SketchUp 2024", "details": null}, {"start_s": 6715.743, "end_s": 6725.375, "action": "Completed the segment operation and changed the Segments field from 8 to 3, leaving the lower edge divided into three segments.", "intent": "Set the number of segments for the selected edge.", "app": "SketchUp 2024", "details": "The SketchUp status area showed Segments 3."}, {"start_s": 6725.375, "end_s": 6736.582, "action": "Confirmed the segment count, switched to the Line tool, and began positioning a new line on the wall, with the length field showing 301.08 mm.", "intent": "Add construction geometry to the wall.", "app": "SketchUp 2024", "details": "The Line tool was active and awaiting the second endpoint."}, {"start_s": 6736.582, "end_s": 6744.888, "action": "Orbited and zoomed the model while continuing the line operation, extending a vertical inference line from the lower edge toward the upper wall; the displayed length reached 774.13 mm.", "intent": "Position and size the new vertical line on the wall.", "app": "SketchUp 2024", "details": "The line remained active with a visible green endpoint and length readout."}, {"start_s": 6744.888, "end_s": 6755.952, "action": "Adjusted the view, continued the line operation, and placed a vertical dividing line on the wall; then navigated back to a wider view of the room.", "intent": "Create and inspect a vertical wall division.", "app": "SketchUp 2024", "details": "The resulting wider view showed a vertical line dividing the front wall."}, {"start_s": 6755.952, "end_s": 6766.286, "action": "Selected another point on the wall, orbited and zoomed in, and continued positioning a second vertical line; the active length readout increased from about 714.28 mm to about 1353.85 mm.", "intent": "Continue adding vertical construction geometry to the wall.", "app": "SketchUp 2024", "details": "The Line tool remained active awaiting the second endpoint."}, {"start_s": 6766.286, "end_s": 6776.128, "action": "Adjusted the SketchUp view with clicks, a drag, and repeated scroll inputs, then repositioned the camera to show the long white cabinet-like structure and vertical slatted wall.", "intent": "Inspect and reframe the 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 6776.128, "end_s": 6794.792, "action": "Selected or interacted near the model and orbited the camera with middle-button inputs, changing from a front view to an elevated perspective of the cabinet, slatted wall, and surrounding structures.", "intent": "Review the model from an elevated angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 6794.792, "end_s": 6805.04, "action": "Used middle-button camera controls and scrolling to orbit and zoom around the model, ending on a wider view of the white cabinet, slatted wall, and adjacent gray structures.", "intent": "Refine the inspection viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 6805.04, "end_s": 6815.005, "action": "Zoomed in toward the cabinet fronts, clicked repeatedly on a cabinet face, and opened its context menu showing options including Entity Info, Erase, Hide, Divide, and Make Face.", "intent": "Inspect or modify a selected model entity.", "app": "SketchUp 2024", "details": "A context menu was open at the end of the span."}, {"start_s": 6815.005, "end_s": 6825.35, "action": "Closed the context menu and entered numeric keyboard input including 2 and Enter, then continued interacting with the cabinet face; the view showed a selected vertical edge and an active drawing tool with a length readout of approximately 369.12 mm.", "intent": "Create or adjust geometry using a measured input.", "app": "SketchUp 2024", "details": "The application was briefly hidden after clicking, then returned with the drawing operation active."}, {"start_s": 6825.35, "end_s": 6835.679, "action": "Placed or adjusted a drawing-tool endpoint on the cabinet face, creating a horizontal division across the left cabinet panel, then orbited and zoomed out to review the updated cabinet and surrounding model.", "intent": "Add a horizontal edge or subdivision to the cabinet geometry and inspect the result.", "app": "SketchUp 2024", "details": "The final view showed the new horizontal line on the left cabinet section."}, {"start_s": 6835.679, "end_s": 6845.095, "action": "Undo the prior operation, select the cabinet face, switch to a drawing tool, and enter 3 followed by Enter; the SketchUp window briefly hides and returns with the segment field showing 1.", "intent": "Adjust the active SketchUp drawing operation and its segment setting.", "app": "SketchUp 2024", "details": "Cabinet model remained in view."}, {"start_s": 6845.095, "end_s": 6856.569, "action": "Activate the line tool, draw a line across the left cabinet section, and begin another line from the center divider toward the left; visible length fields update during the operation.", "intent": "Add construction or edge lines to the cabinet geometry.", "app": "SketchUp 2024", "details": "The active line tool showed changing length values."}, {"start_s": 6856.569, "end_s": 6866.69, "action": "Orbit and zoom the model, then select near the cabinet face; the view changed from a close cabinet elevation to a wider exterior perspective and back to a close-up.", "intent": "Inspect the cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": "No confirmed geometry change was visible during the navigation."}, {"start_s": 6866.69, "end_s": 6877.059, "action": "Orbit and zoom out repeatedly around the model, moving from a close-up to an elevated view of the cabinet, slatted fence, and surrounding walls.", "intent": "Review the overall modeled arrangement from an elevated perspective.", "app": "SketchUp 2024", "details": "Navigation used middle-mouse orbiting and scrolling."}, {"start_s": 6877.059, "end_s": 6887.629, "action": "Scroll to zoom toward the cabinet front and slatted fence, ending on a close view of the cabinet divisions.", "intent": "Refine the inspection view of the cabinet front.", "app": "SketchUp 2024", "details": "The model geometry remained unchanged in the visible evidence."}, {"start_s": 6887.629, "end_s": 6898.131, "action": "Orbit and zoom around the cabinet, then click cabinet faces repeatedly; the upper-left and central cabinet faces become selected with blue outlines and stippled fill.", "intent": "Select cabinet faces for a subsequent modeling operation.", "app": "SketchUp 2024", "details": "Final view shows multiple cabinet faces selected."}, {"start_s": 6898.131, "end_s": 6907.748, "action": "Scrolled slightly, clicked the cabinet face, and switched to the Line tool; positioned the cursor to begin drawing an edge.", "intent": "Prepare to add geometry to the cabinet model.", "app": "SketchUp 2024", "details": null}, {"start_s": 6907.748, "end_s": 6913.123, "action": "Clicked to set a first endpoint and moved the Line tool toward the upper cabinet edge, producing a vertical inference preview; adjusted the view with middle-button navigation and scrolling.", "intent": "Construct and position a new line segment on the cabinet face.", "app": "SketchUp 2024", "details": "The Line tool displayed a length of approximately 123.87 mm before navigation."}, {"start_s": 6913.123, "end_s": 6923.779, "action": "Pressed Escape to cancel the active line operation, then scrolled and navigated the view while leaving the model geometry unchanged.", "intent": "Cancel the tentative line and inspect the model from a different view.", "app": "SketchUp 2024", "details": null}, {"start_s": 6923.779, "end_s": 6933.25, "action": "Navigated outward with middle-button movement and scrolling, clicked near the cabinet edge, and repositioned the view while the Line tool remained active with a pending endpoint.", "intent": "Adjust the camera and continue positioning geometry on the cabinet.", "app": "SketchUp 2024", "details": "The view zoomed out to show more of the countertop, slatted backsplash, and cabinet run."}, {"start_s": 6933.25, "end_s": 6943.177, "action": "Clicked and scrolled around the model, briefly navigated the camera, and selected the upper-left cabinet drawer face; zoomed out to reveal the full cabinet assembly.", "intent": "Inspect and select the cabinet component for further modeling.", "app": "SketchUp 2024", "details": "The selected cabinet face became highlighted with a dotted pattern in the final view."}, {"start_s": 6943.177, "end_s": 6947.841, "action": "Scrolled slightly and repeatedly clicked the highlighted upper-left drawer face, keeping that cabinet face selected.", "intent": "Maintain or refine selection of the cabinet drawer face.", "app": "SketchUp 2024", "details": "The upper-left drawer/front face remained highlighted."}, {"start_s": 6947.841, "end_s": 6958.531, "action": "Activated the offset tool and began entering a value by typing \u201cF\u201d while the upper-left cabinet face remained selected.", "intent": "Prepare an offset operation on the selected cabinet face.", "app": "SketchUp 2024", "details": "The offset prompt and selected stippled face were visible."}, {"start_s": 6958.531, "end_s": 6971.075, "action": "Selected the cabinet face, adjusted the view with clicks and middle-button navigation, then entered \u201c18MM\u201d and confirmed it to offset the face.", "intent": "Create an 18 mm offset on the selected cabinet geometry.", "app": "SketchUp 2024", "details": "The Distance field displayed changing offset measurements during the operation."}, {"start_s": 6971.075, "end_s": 6986.859, "action": "Navigated the view and left the offset operation active on the upper-left cabinet face, then pressed Space to switch toward selection.", "intent": "Inspect or finish the cabinet-face offset before selecting geometry.", "app": "SketchUp 2024", "details": "The face remained outlined with an offset boundary and a red grip."}, {"start_s": 6986.859, "end_s": 6996.963, "action": "Selected the lower cabinet face, initiated an offset, entered \u201c18MM,\u201d confirmed it, and left the resulting face selected.", "intent": "Apply the same 18 mm offset treatment to the next cabinet face.", "app": "SketchUp 2024", "details": "The lower rectangular face became stippled and showed an offset outline."}, {"start_s": 6996.963, "end_s": 7007.049, "action": "Selected the bottom cabinet face, applied another \u201c18MM\u201d offset and confirmed it, then navigated with scrolling and middle-button clicks.", "intent": "Repeat the cabinet-face offset and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "Three stacked rectangular cabinet fronts were visible after the operation."}, {"start_s": 7007.049, "end_s": 7020.793, "action": "Exited the active selection state and orbited and zoomed out with middle-button navigation to review the cabinet run in the wider kitchen model.", "intent": "Review the completed cabinet-front geometry in context.", "app": "SketchUp 2024", "details": "The final view showed the kitchen corner with three stacked drawer fronts and surrounding cabinetry."}, {"start_s": 7020.793, "end_s": 7031.098, "action": "Navigated around the SketchUp cabinet model with middle-mouse orbiting and repeated selections, then entered \u201cP\u201d and adjusted the view to show the drawer fronts and an open upper compartment.", "intent": "Inspect and modify the cabinet model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 7031.098, "end_s": 7041.082, "action": "Orbited and zoomed out from the cabinet close-up, pressed Escape, and continued navigating until the broader kitchen layout with the cabinet run and adjacent structure was visible.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 7041.082, "end_s": 7051.619, "action": "Orbited and zoomed around the kitchen counter and slatted backsplash, then selected or dragged along the countertop edge while inspecting the geometry.", "intent": "Inspect countertop and backsplash geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 7051.619, "end_s": 7057.361, "action": "Pressed \u201cT,\u201d zoomed into the lower cabinet area, and used the Tape Measure tool to place or extend a guide along the cabinet edge.", "intent": "Measure or align the cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 7057.361, "end_s": 7067.603, "action": "Continued positioning the Tape Measure guide along the cabinet edge, clicking and dragging to extend it across the model while zooming slightly.", "intent": "Establish a reference guide for alignment.", "app": "SketchUp 2024", "details": null}, {"start_s": 7067.603, "end_s": 7077.505, "action": "Exited the close-up guide view by orbiting and zooming out, pressed Space, and continued navigating to show the full cabinet run, countertop, backsplash, and surrounding floor area.", "intent": "Review the aligned cabinet assembly in context.", "app": "SketchUp 2024", "details": null}, {"start_s": 7077.505, "end_s": 7087.563, "action": "Navigated around the SketchUp kitchen cabinet model with middle-button orbiting/zooming and scrolling, then clicked and dragged on the cabinet geometry while the Push/Pull tool remained active.", "intent": "Inspect and adjust the cabinet model geometry.", "app": "SketchUp 2024", "details": "The view changed from a close-up of a cabinet edge to a wider view of the L-shaped cabinets."}, {"start_s": 7087.563, "end_s": 7096.657, "action": "Dragged and clicked around the left cabinet unit, then orbited and scrolled to reposition the view while selecting cabinet faces.", "intent": "Refine or inspect the left cabinet section.", "app": "SketchUp 2024", "details": "The cabinet fronts and open shelving remained visible from progressively shifted viewpoints."}, {"start_s": 7096.657, "end_s": 7107.643, "action": "Pressed P and clicked cabinet faces, then orbited and scrolled to inspect the shelving and adjacent cabinet geometry from above and the side.", "intent": "Use Push/Pull on cabinet faces and review the resulting geometry.", "app": "SketchUp 2024", "details": "The view moved from the front shelving to an elevated side view showing projecting cabinet elements."}, {"start_s": 7107.643, "end_s": 7117.849, "action": "Clicked and orbited around the cabinet assembly, zoomed out and back in, then clicked and dragged on the lower cabinet face with Push/Pull active.", "intent": "Adjust and inspect cabinet face geometry.", "app": "SketchUp 2024", "details": "The view ended on a close front view with the lower cabinet face selected."}, {"start_s": 7117.849, "end_s": 7127.657, "action": "Continued clicking and dragging the selected lower cabinet face, pressed P, then orbited to a side view of the cabinet and adjacent wall.", "intent": "Modify the selected cabinet face and inspect its placement.", "app": "SketchUp 2024", "details": "The lower face remained highlighted before the view shifted to the cabinet side."}, {"start_s": 7127.657, "end_s": 7136.585, "action": "Orbited and clicked around the cabinet side, pressed Escape, then selected and dragged a cabinet face with Push/Pull active, changing the displayed distance to about 77.40 mm.", "intent": "Adjust the cabinet side face using Push/Pull.", "app": "SketchUp 2024", "details": "The final view showed the cabinet shelving from an oblique angle with a face selected and Push/Pull distance visible."}, {"start_s": 7136.585, "end_s": 7146.561, "action": "Canceled or reverted prior input, clicked and dragged on the cabinet side face, and navigated the SketchUp view around the selected face.", "intent": "Adjust the cabinet geometry or inspect the selected face.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active with the face selected and a distance of 91.70 mm visible."}, {"start_s": 7146.561, "end_s": 7155.801, "action": "Orbited and scrolled around the cabinet, then clicked the lower shelf-area face several times and entered P to continue editing.", "intent": "Position the model and select a shelf face for modification.", "app": "SketchUp 2024", "details": "The view changed from an oblique cabinet view to a closer view of three open shelf compartments."}, {"start_s": 7155.801, "end_s": 7166.269, "action": "Scrolled and navigated into a close-up of the cabinet, clicked an edge or face, and left the Push/Pull tool active while inspecting the selected geometry.", "intent": "Refine the view and prepare a cabinet face for extrusion.", "app": "SketchUp 2024", "details": "The camera moved to a very close view of a white cabinet panel; the status bar indicated Push/Pull on the selected face."}, {"start_s": 7166.269, "end_s": 7175.786, "action": "Scrolled extensively to zoom out, clicked and navigated across the model, and returned to a frontal view of the cabinet shelves.", "intent": "Inspect the cabinet in context and reframe the model.", "app": "SketchUp 2024", "details": "The view briefly showed the entire floor plan and then returned to the cabinet with three open shelves."}, {"start_s": 7175.786, "end_s": 7185.427, "action": "Orbited and zoomed into the shelves, repeatedly clicked the upper shelf surface, and selected that face for editing.", "intent": "Select the upper shelf face for a geometry operation.", "app": "SketchUp 2024", "details": "The upper shelf surface became highlighted with a dotted selection pattern."}, {"start_s": 7185.427, "end_s": 7195.403, "action": "Clicked the selected upper shelf face and entered 9MM as a precise Push/Pull distance.", "intent": "Apply a 9 mm adjustment to the selected shelf face.", "app": "SketchUp 2024", "details": "The Push/Pull distance field showed 10.84 mm at the captured frame; the typed value was 9MM near the end of the span."}, {"start_s": 7195.403, "end_s": 7205.084, "action": "Pressed Enter, clicked and scrolled within the cabinet model, then clicked and dragged on a shelf face before cancelling with Escape.", "intent": "Adjust the selected shelf geometry using the Push/Pull tool.", "app": "SketchUp 2024", "details": "The view remained zoomed into the cabinet shelves; the Push/Pull distance changed from 9.00 mm to 0.00 mm."}, {"start_s": 7205.084, "end_s": 7214.683, "action": "Selected the upper shelf face, entered dimensional values including 9M and M, and pressed Enter to apply the Push/Pull operation.", "intent": "Set a precise thickness or offset for the selected shelf face.", "app": "SketchUp 2024", "details": "The shelf face was highlighted and the visible Push/Pull distance reached 17.72 mm before being set to 9."}, {"start_s": 7214.683, "end_s": 7224.401, "action": "Scrolled and middle-clicked to orbit or reposition the view, zooming out to show three stacked cabinet compartments, then clicked the lowest shelf face.", "intent": "Inspect the cabinet structure and select another shelf surface for editing.", "app": "SketchUp 2024", "details": "The final view showed the lower shelf face selected with Push/Pull active and distance at 0.00 mm."}, {"start_s": 7224.401, "end_s": 7234.139, "action": "Entered 9 followed by MM and Enter, navigated the view with middle-clicks, and clicked the middle shelf face to apply another Push/Pull value.", "intent": "Apply a 9 mm adjustment to a cabinet shelf face.", "app": "SketchUp 2024", "details": "The middle shelf face became stipple-highlighted and the Push/Pull distance displayed 9."}, {"start_s": 7234.139, "end_s": 7244.17, "action": "Entered additional millimeter values and pressed Enter, orbited and zoomed around the cabinet, then clicked near the left side of the model.", "intent": "Continue precise shelf adjustments and inspect the resulting cabinet geometry.", "app": "SketchUp 2024", "details": "The view shifted from the full three-compartment cabinet to a close-up; the final click left a blue edge highlighted."}, {"start_s": 7244.17, "end_s": 7252.289, "action": "Scrolled extensively while zoomed into the cabinet, clicked the left side, then middle-clicked to orbit and zoomed back out to the full three-shelf cabinet.", "intent": "Reposition the camera to review the edited cabinet model.", "app": "SketchUp 2024", "details": "The final view showed the three stacked compartments from an angled perspective."}, {"start_s": 7252.289, "end_s": 7262.051, "action": "Orbited the SketchUp model around the built-in shelving, then pressed Escape to leave the interaction.", "intent": "Inspect the shelving geometry from a different angle.", "app": "SketchUp", "details": null}, {"start_s": 7262.051, "end_s": 7272.033, "action": "Orbited and zoomed the camera outward to review the full cabinetry layout, then clicked repeatedly in the model area.", "intent": "Review the overall cabinet arrangement and adjust the view.", "app": "SketchUp", "details": null}, {"start_s": 7272.033, "end_s": 7284.411, "action": "Selected the large center cabinet face and zoomed in toward it; pressed F while the face remained selected.", "intent": "Focus on the center cabinet panel for editing.", "app": "SketchUp", "details": "The center face is visibly highlighted with a stippled selection pattern."}, {"start_s": 7284.411, "end_s": 7293.204, "action": "Activated the Offset tool on the selected center face, drew an inset rectangle, entered 18MM, and confirmed with Enter.", "intent": "Create a measured inset or border on the center cabinet panel.", "app": "SketchUp", "details": "The offset distance field shows the entered value and the panel displays an inset boundary."}, {"start_s": 7293.204, "end_s": 7303.21, "action": "Adjusted the view and clicked the center panel repeatedly, leaving the panel selected in the cabinetry model.", "intent": "Inspect or refine the selected center panel after creating the inset.", "app": "SketchUp", "details": null}, {"start_s": 7303.21, "end_s": 7313.009, "action": "Pressed P to activate Push/Pull, clicked the selected geometry, and dragged while zooming and orbiting to a close-up view of the cabinet structure.", "intent": "Modify the cabinet geometry with the Push/Pull tool and inspect the result.", "app": "SketchUp", "details": "The Push/Pull tool is active and the distance readout changes during the drag."}, {"start_s": 7313.009, "end_s": 7324.283, "action": "Orbited and zoomed around the SketchUp cabinetry model, moving from a wider view to a close-up of the shelving and adjacent compartment.", "intent": "Inspect the modeled shelving and compartments from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 7324.283, "end_s": 7334.755, "action": "Zoomed out and repositioned the camera to show more of the shelving unit and adjacent open compartment.", "intent": "Review the overall arrangement of the cabinetry sections.", "app": "SketchUp 2024", "details": null}, {"start_s": 7334.755, "end_s": 7342.77, "action": "Orbited and selected the right-side cabinet face, then activated an editing operation on the selected surface.", "intent": "Modify the selected cabinet face.", "app": "SketchUp 2024", "details": "The right-side face is highlighted with a stippled selection pattern, and an offset-style editing tool is active by the end of the span."}, {"start_s": 7342.77, "end_s": 7352.658, "action": "Entered 18 and confirmed with Enter, then continued editing the selected cabinet face with additional clicks and a short drag while changing the view.", "intent": "Set a numeric dimension for the cabinet-face edit and adjust the model.", "app": "SketchUp 2024", "details": "The selected face remains visible during the edit; the camera shifts to an angled view of the cabinet run."}, {"start_s": 7352.658, "end_s": 7362.921, "action": "Orbited and zoomed far out from the cabinet face, clicked within the model, and ended on a wide overview of the L-shaped cabinetry and surrounding walls.", "intent": "Inspect the edited cabinetry in the broader room context.", "app": "SketchUp 2024", "details": "The final view shows the full cabinet run, corner section, surrounding walls, and floor layout."}, {"start_s": 7362.921, "end_s": 7382.921, "action": "Made a few middle-click and scroll camera adjustments, then left the SketchUp model in a stable elevated overview of the cabinetry and room walls.", "intent": "Settle on an overall inspection view of the model.", "app": "SketchUp 2024", "details": "No further model edits are evident during the remaining stable interval."}, {"start_s": 7382.921, "end_s": 7400.273, "action": "Waited in SketchUp, then scrolled without an evident view change while the architectural model remained visible.", "intent": "Review the model view.", "app": "SketchUp 2024", "details": "System configuration and connectivity changes occurred during the span."}, {"start_s": 7400.273, "end_s": 7411.658, "action": "Scrolled repeatedly to zoom out, reducing the model to a smaller view and revealing more surrounding floor-plan geometry.", "intent": "Adjust the 3D view for broader inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 7411.658, "end_s": 7422.768, "action": "Middle-clicked and scrolled to orbit and reposition the camera, changing from a distant oblique view to a more frontal view of the model.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2024", "details": "The model remained selected within a dotted bounding region."}, {"start_s": 7422.768, "end_s": 7432.799, "action": "Orbit-zoomed toward the model, activated a face-editing tool, and entered a distance value of 9MM before confirming; the view ended in a close-up of the wall and openings.", "intent": "Edit or offset a selected model face.", "app": "SketchUp 2024", "details": "The status bar showed a distance of 12.77 mm during the tool operation."}, {"start_s": 7432.799, "end_s": 7443.353, "action": "Selected the narrow vertical interior face, activated the face-editing tool, and entered 9MM; the face became highlighted and displayed an offset limit of -18.00 mm.", "intent": "Apply an offset operation to the selected interior face.", "app": "SketchUp 2024", "details": "The operation remained active at the end of the span."}, {"start_s": 7443.353, "end_s": 7451.471, "action": "Confirmed the entered operation, briefly invoked undo, then reselected the same vertical face and clicked with the push/pull tool; the face remained highlighted with distance 0.00 mm.", "intent": "Finalize or revise the face modification.", "app": "SketchUp 2024", "details": "The push/pull tool was active at the end of the span."}, {"start_s": 7451.471, "end_s": 7462.609, "action": "Entered 9MM and confirmed the value while the Push/Pull tool remained active on the selected cabinet side face.", "intent": "Set the push/pull distance for the selected face.", "app": "SketchUp 2024", "details": "The Measurements box showed a distance of 9."}, {"start_s": 7462.609, "end_s": 7473.017, "action": "Exited the active edit state, navigated the 3D view with middle-button orbit/pan and scrolling, and clicked around the cabinet geometry.", "intent": "Inspect and reposition the model view for the next edit.", "app": "SketchUp 2024", "details": "The view shifted from a close-up cabinet bay to a wider view of the shelving."}, {"start_s": 7473.017, "end_s": 7484.271, "action": "Orbited and adjusted the view, then clicked repeatedly on cabinet faces while switching to a selection-oriented tool.", "intent": "Inspect and select a cabinet face for modification.", "app": "SketchUp 2024", "details": "The view widened to show multiple shelving bays, and a small side face became selected."}, {"start_s": 7484.271, "end_s": 7495.081, "action": "Activated Push/Pull on the selected side face, entered 9MM, and confirmed the value.", "intent": "Apply a 9 mm push/pull adjustment to the selected cabinet face.", "app": "SketchUp 2024", "details": "The selected face remained highlighted and the Measurements box displayed 9."}, {"start_s": 7495.081, "end_s": 7507.241, "action": "Selected the upper cabinet side face, activated Push/Pull, and entered 9MM to modify its depth.", "intent": "Adjust the upper shelving face by 9 mm.", "app": "SketchUp 2024", "details": "The upper side face was highlighted; the Measurements box later showed 10.89 mm."}, {"start_s": 7507.241, "end_s": 7520.57, "action": "Confirmed the push/pull entry, navigated the view slightly, selected the upper side face again, and entered 9MM for another adjustment.", "intent": "Continue applying the same dimensional edit to the adjacent cabinet face.", "app": "SketchUp 2024", "details": "The upper side face remained highlighted with Push/Pull active at the end of the span."}, {"start_s": 7520.57, "end_s": 7530.961, "action": "Selected faces and adjusted the SketchUp view around the shelving and cabinet compartments, ending with the Push/Pull tool active on a narrow vertical face.", "intent": "Modify or inspect the cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 7530.961, "end_s": 7541.545, "action": "Applied a Push/Pull adjustment to the selected narrow cabinet face and entered 9MM, then confirmed the value.", "intent": "Set the selected face thickness or offset to 9 mm.", "app": "SketchUp 2024", "details": "The measurement field shows 9 after confirmation."}, {"start_s": 7541.545, "end_s": 7552.176, "action": "Navigated around the model, selected cabinet geometry, and switched to orbiting to pull back from a close-up to a wider view of the shelving unit.", "intent": "Review the edited cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 7552.176, "end_s": 7561.991, "action": "Orbited and zoomed around the cabinet assembly, moving from a front-side view to an elevated overview of the shelving and surrounding wall panels.", "intent": "Inspect the overall model layout and edited features.", "app": "SketchUp 2024", "details": null}, {"start_s": 7561.991, "end_s": 7573.048, "action": "Continued orbiting and zooming out to review the cabinet, slatted wall, and adjacent room geometry from progressively wider angles.", "intent": "Evaluate the assembled design in context.", "app": "SketchUp 2024", "details": null}, {"start_s": 7573.048, "end_s": 7593.048, "action": "Zoomed and orbited around the model, briefly showing a distant room view before returning to a closer perspective of the shelving and cabinet compartments.", "intent": "Review the completed cabinet arrangement from multiple scales.", "app": "SketchUp 2024", "details": null}, {"start_s": 7593.048, "end_s": 7603.761, "action": "Scrolled the SketchUp viewport with no apparent change to the kitchen model.", "intent": "Adjust the 3D view.", "app": "SketchUp 2024", "details": null}, {"start_s": 7603.761, "end_s": 7613.327, "action": "Orbit-clicked and scrolled around the kitchen model, changing from a close view to a wider perspective and then a front-facing view of the cabinetry and walls.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 7613.327, "end_s": 7633.327, "action": "Orbit-clicked and lightly scrolled to reposition the camera, ending on a closer view of the shelves and open cabinet bays.", "intent": "Inspect the cabinetry layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 7633.327, "end_s": 7645.233, "action": "Scrolled and orbit-clicked repeatedly, alternating between wider and close views of the shelving, open cabinet compartments, counter surface, and slatted wall.", "intent": "Review the modeled kitchen components from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 7645.233, "end_s": 7655.007, "action": "Orbit-clicked and scrolled from a low front angle to a higher overhead view, revealing the counter, shelving, open bays, and corner wall.", "intent": "Examine the model geometry from different elevations.", "app": "SketchUp 2024", "details": null}, {"start_s": 7655.007, "end_s": 7664.113, "action": "Orbit-clicked and scrolled to a slightly wider elevated perspective of the kitchen cabinetry and slatted perimeter wall, then typed the letter \u201cR.\u201d", "intent": "Continue inspecting the model and issue a keyboard command.", "app": "SketchUp 2024", "details": "The visible result of the typed \u201cR\u201d was not apparent."}, {"start_s": 7664.113, "end_s": 7673.935, "action": "Scrolled through the SketchUp model, then clicked and dragged from the lower edge of the central cabinet opening to begin drawing or positioning geometry.", "intent": "Edit the cabinet model near the central opening.", "app": "SketchUp 2024", "details": "The view showed a built-in cabinet with shelves and a slatted upper panel; the drawing tool remained active."}, {"start_s": 7673.935, "end_s": 7684.399, "action": "Clicked and dragged around the cabinet, navigated the 3D view, and selected the large central cabinet panel; then switched to the Select tool.", "intent": "Inspect and select the central cabinet component.", "app": "SketchUp 2024", "details": "The central rectangular panel was outlined in blue in the final view."}, {"start_s": 7684.399, "end_s": 7694.559, "action": "Selected the central panel, activated a modification tool, and entered keyboard values including P, 1, and 8MM before confirming and clicking away.", "intent": "Modify the central cabinet panel using a measured value.", "app": "SketchUp 2024", "details": "The panel briefly displayed tool handles and a distance field showing 1."}, {"start_s": 7694.559, "end_s": 7704.945, "action": "Dragged and orbited around the model, zooming and panning from the central panel to a close-up of the cabinet face and adjacent opening.", "intent": "Review the modified cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The view moved from the full cabinet assembly to close views of the panel edges and shelves."}, {"start_s": 7704.945, "end_s": 7712.831, "action": "Navigated closer to the cabinet, clicked the large front panel, typed M, and activated the Move tool with the panel selected.", "intent": "Prepare to move the large cabinet panel.", "app": "SketchUp 2024", "details": "The final view showed the panel selected with blue edges and move-tool handles."}, {"start_s": 7712.831, "end_s": 7722.809, "action": "Orbited and zoomed around the exterior of the model, then returned to a wider front view and clicked the central panel while it remained selected.", "intent": "Inspect the cabinet assembly and its panel placement from multiple angles.", "app": "SketchUp 2024", "details": "The final view showed the full built-in cabinet, slatted upper section, side walls, and the central panel outlined in blue."}, {"start_s": 7722.809, "end_s": 7738.998, "action": "Clicked and scrolled within the SketchUp kitchen model, then moved the application window and switched back to the main SketchUp view.", "intent": "Inspect or adjust the selected cabinet component while navigating between SketchUp windows.", "app": "SketchUp", "details": "A central cabinet panel remained selected in the kitchen model."}, {"start_s": 7738.998, "end_s": 7757.279, "action": "Resized and repositioned the SketchUp window, clicked the model and toolbar, opened the Extensions menu, and then hid and restored the application.", "intent": "Access SketchUp tools and manage the modeling window.", "app": "SketchUp", "details": "The Extensions menu displayed installed tools, including CTS_Group and Component_V1.0.3."}, {"start_s": 7757.279, "end_s": 7763.725, "action": "Resized the SketchUp window and clicked toolbar controls, ending with the main model view visible and the configuration control highlighted.", "intent": "Prepare or open a joint configuration tool for the selected component.", "app": "SketchUp", "details": "The selected cabinet panel remained outlined in blue."}, {"start_s": 7763.725, "end_s": 7774.623, "action": "Opened the Joint configuration dialog, interacted with the joint-type controls, and changed the displayed joint type from slider to hinge before returning to the model window.", "intent": "Configure the selected cabinet component as a hinge joint.", "app": "SketchUp", "details": "The dialog showed Open and Close controls, an animation time of 1 second, and the joint type set to hinge."}, {"start_s": 7774.623, "end_s": 7783.799, "action": "Scrolled and changed the SketchUp camera view, then activated the hinge joint selection and closed or hid the configuration dialog; the cabinet panel appeared opened outward in the model.", "intent": "Select or preview the hinge axis and open the cabinet panel.", "app": "SketchUp", "details": "The model was shown from a wider angle with red hinge guides and the panel swung outward."}, {"start_s": 7783.799, "end_s": 7803.799, "action": "Remained inactive while the SketchUp model displayed the cabinet panel in an open position.", "intent": "Review the resulting hinge position in the kitchen model.", "app": "SketchUp", "details": "No recorded interaction events occurred during this interval."}, {"start_s": 7803.799, "end_s": 7814.087, "action": "Scrolled within the SketchUp model, clicked the central cabinet panel, and dragged it to rotate it outward on its joint.", "intent": "Adjust the position of a cabinet door or panel in the 3D kitchen model.", "app": "SketchUp", "details": "The central panel changed from nearly closed to visibly open."}, {"start_s": 7814.087, "end_s": 7825.139, "action": "Selected the central cabinet panel, typed a space, and clicked the toolbar gear control, leaving the panel selected and opening the joint configuration workflow.", "intent": "Configure the selected cabinet panel's joint behavior.", "app": "SketchUp", "details": "The model view shifted slightly and the central panel was outlined in blue."}, {"start_s": 7825.139, "end_s": 7829.197, "action": "Displayed the Joint configuration dialog for the selected panel, showing a hinge joint type, Open and Close position controls, and a one-second animation time, then clicked back into the SketchUp model.", "intent": "Review or configure hinge settings for the cabinet panel.", "app": "SketchUp", "details": "The dialog showed a red joint axis and hinge rotation indicator on the panel."}, {"start_s": 7829.197, "end_s": 7849.197, "action": "Closed or hid the joint configuration dialog and clicked the cabinet panel, causing it to swing outward from the cabinet opening.", "intent": "Test the configured hinge movement of the cabinet panel.", "app": "SketchUp", "details": "The panel rotated from closed across the foreground to an open position."}, {"start_s": 7849.197, "end_s": 7857.801, "action": "Paused on the open cabinet panel, then scrolled to zoom in on the cabinet shelves and hinge area.", "intent": "Inspect the panel and hinge geometry more closely.", "app": "SketchUp", "details": "The view moved to a close-up of the shelving and the selected cabinet opening."}, {"start_s": 7857.801, "end_s": 7875.377, "action": "Scrolled and adjusted the view around the close-up cabinet opening while the panel remained open and selected.", "intent": "Continue inspecting the cabinet panel's open hinge position.", "app": "SketchUp", "details": "The final view showed the panel projecting outward in front of the shelves and cabinet opening."}, {"start_s": 7875.377, "end_s": 7881.288, "action": "Orbit the SketchUp camera around the cabinet model with middle-button drags and a brief scroll, changing from a close angled view to a more frontal view of the shelving and open panel.", "intent": "Adjust the 3D view to inspect the cabinet assembly.", "app": "SketchUp 2024", "details": null}, {"start_s": 7881.288, "end_s": 7901.288, "action": "Remain idle while the SketchUp view displays the cabinet front, shelves, open panel, and surrounding railing.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": "No recorded interaction events."}, {"start_s": 7901.288, "end_s": 7911.73, "action": "Scroll repeatedly to zoom the SketchUp camera out, revealing more of the cabinet, floor layout, and adjacent wall structure.", "intent": "Broaden the model view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 7911.73, "end_s": 7931.73, "action": "Orbit and zoom the camera, then settle on a closer frontal view of the shelving and cabinet compartments with the center panel selected in red.", "intent": "Inspect the cabinet front and panel geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 7931.73, "end_s": 7951.73, "action": "Remain idle while the cabinet model stays visible with the center panel open and the adjacent shelves and compartments in view.", "intent": "Review the model configuration.", "app": "SketchUp 2024", "details": "No recorded interaction events."}, {"start_s": 7951.73, "end_s": 7961.784, "action": "Press Space, switch tools, select and manipulate the center cabinet panel so it appears open and highlighted, then click elsewhere to leave the panel closed and deselected; finish with a brief scroll.", "intent": "Modify and inspect the cabinet panel position.", "app": "SketchUp 2024", "details": null}, {"start_s": 7961.784, "end_s": 7969.351, "action": "Orbited and zoomed around the SketchUp kitchen cabinetry, moving from a close-up of cabinet surfaces to a wider view of the shelving and corner unit.", "intent": "Inspect the modeled cabinetry from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 7969.351, "end_s": 7974.977, "action": "Zoomed and orbited closer to the lower cabinetry, bringing the open shelves and large central panel into close view.", "intent": "Examine cabinet construction and details.", "app": "SketchUp 2024", "details": null}, {"start_s": 7974.977, "end_s": 7984.591, "action": "Continued zooming and panning across the lower shelves and adjacent large panel, ending on a tight close-up of their edges and surfaces.", "intent": "Inspect the cabinet components closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 7984.591, "end_s": 8004.591, "action": "Orbited and zoomed back to frame the longer cabinetry run, corner counter, open shelving, and slatted backsplash; then remained on the overall model view.", "intent": "Review the overall kitchen cabinetry layout.", "app": "SketchUp 2024", "details": "The view stayed unchanged during an extended inactive interval after the camera adjustment."}, {"start_s": 8004.591, "end_s": 8016.833, "action": "Zoomed out to reveal a wider perspective of the kitchen area, including the cabinetry, backsplash, floor outline, and surrounding wall elements.", "intent": "Review the model in broader spatial context.", "app": "SketchUp 2024", "details": null}, {"start_s": 8016.833, "end_s": 8026.558, "action": "Orbited and zoomed around the cabinetry, then settled on a front-facing view of the open shelves, central panels, corner cabinet, and slatted backsplash.", "intent": "Refine the inspection viewpoint for the cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 8026.558, "end_s": 8041.207, "action": "Clicked repeatedly around the lower shelf area, leaving the cabinet geometry selected in blue.", "intent": "Select the cabinet or shelf geometry for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 8041.207, "end_s": 8053.031, "action": "Clicked the lower shelf face, typed R, and dragged across the face to begin a rectangular operation; the lower shelf face became stippled and the tool remained active.", "intent": "Create or modify geometry on the lower shelf face.", "app": "SketchUp 2024", "details": "The face was shown with an \u201cOn Face\u201d inference and an active drawing cursor."}, {"start_s": 8053.031, "end_s": 8063.078, "action": "Typed a space, clicked the lower shelf face several times, and opened its context menu with options including Erase, Hide, Reverse Faces, and Push/Pull.", "intent": "Inspect available editing commands for the lower shelf face.", "app": "SketchUp 2024", "details": "The lower shelf face remained selected beneath the context menu."}, {"start_s": 8063.078, "end_s": 8068.759, "action": "Closed the context menu, clicked the lower cabinet face, typed P, and activated Push/Pull on the face.", "intent": "Extrude the lower cabinet face.", "app": "SketchUp 2024", "details": "The Push/Pull tool showed an active distance of 40.00 mm."}, {"start_s": 8068.759, "end_s": 8086.586, "action": "Entered 580MM for the active Push/Pull operation, extending the lower cabinet face into a large rectangular block.", "intent": "Set the extrusion depth of the lower cabinet geometry.", "app": "SketchUp 2024", "details": "The model displayed the newly extended block while the distance field showed 580."}, {"start_s": 8086.586, "end_s": 8096.601, "action": "Pressed Enter to confirm the 580 mm extrusion, then orbited and adjusted the view around the cabinet and extended block.", "intent": "Finalize the extrusion and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "The final view showed the extended rectangular block projecting from the lower cabinet area."}, {"start_s": 8096.601, "end_s": 8106.575, "action": "Selected the drawer-front geometry, activated an offset/measurement operation, and began defining an offset along the top face.", "intent": "Create or adjust an inset detail on the drawer component.", "app": "SketchUp 2024", "details": "The top face was selected and the status bar showed an offset distance of approximately 31.14 mm."}, {"start_s": 8106.575, "end_s": 8115.728, "action": "Entered a space while the offset operation remained active, then pressed Escape to cancel or exit it.", "intent": "Conclude the current geometry-editing operation.", "app": "SketchUp 2024", "details": null}, {"start_s": 8115.728, "end_s": 8126.248, "action": "Undid recent changes, activated Offset, selected the drawer top face, and dragged inward to create an inset rectangular outline.", "intent": "Add an inset border to the drawer top.", "app": "SketchUp 2024", "details": "The offset preview showed a distance of approximately 135.33 mm."}, {"start_s": 8126.248, "end_s": 8138.719, "action": "Continued the offset operation and clicked to confirm the inset, leaving a smaller rectangle inside the drawer top face.", "intent": "Finalize the inset geometry on the drawer.", "app": "SketchUp 2024", "details": "The displayed offset distance changed to approximately 167.91 mm before confirmation."}, {"start_s": 8138.719, "end_s": 8148.903, "action": "Confirmed the offset, adjusted the camera view with scroll input, and selected the drawer assembly so its outer and inner edges highlighted in blue.", "intent": "Inspect the completed inset and prepare the drawer geometry for further editing.", "app": "SketchUp 2024", "details": "The view zoomed out and then back in on the selected drawer beneath the cabinet shelves."}, {"start_s": 8148.903, "end_s": 8160.69, "action": "Clicked repeatedly on the drawer geometry, activated Move, and selected the inset rectangular element for movement.", "intent": "Prepare to reposition the inset drawer component.", "app": "SketchUp 2024", "details": "The Move tool was active and the selected inset edge showed a move handle."}, {"start_s": 8160.69, "end_s": 8169.03, "action": "Selected the drawer-like front face and used Push/Pull interactions, leaving the interior face highlighted with a distance of 60.88 mm.", "intent": "Adjust the drawer geometry.", "app": "SketchUp 2024", "details": "Visible cabinet model with an open drawer-like component."}, {"start_s": 8169.03, "end_s": 8177.24, "action": "Orbited the camera around the cabinet and drawer, changing from a front view to an elevated underside view while the Push/Pull tool remained active.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2024", "details": "The view rotated substantially; no clear geometry change was confirmed."}, {"start_s": 8177.24, "end_s": 8187.718, "action": "Selected and manipulated the drawer area, orbited and zoomed out to inspect the cabinet assembly, then returned to a wider perspective view.", "intent": "Review the drawer placement and surrounding cabinet geometry.", "app": "SketchUp 2024", "details": "The drawer remained visibly open and outlined within the cabinet model."}, {"start_s": 8187.718, "end_s": 8198.105, "action": "Zoomed and adjusted the view around the drawer, selected its interior face with Push/Pull, and left the face no longer selected after the interaction.", "intent": "Modify or inspect the drawer interior depth.", "app": "SketchUp 2024", "details": "A 25.04 mm distance was visible during one Push/Pull interaction."}, {"start_s": 8198.105, "end_s": 8205.416, "action": "Orbited and zoomed closer to the drawer, selected its interior face, and applied a Push/Pull adjustment that displayed an offset limited to 80.44 mm.", "intent": "Adjust the drawer interior geometry.", "app": "SketchUp 2024", "details": "The close-up view showed the drawer inside the cabinet; the face was highlighted during the adjustment."}, {"start_s": 8205.416, "end_s": 8215.872, "action": "Clicked the drawer interior with Push/Pull active and left the model in the close-up view without a clearly confirmed geometry change.", "intent": "Continue editing or inspect the drawer interior.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active and the distance field showed 80.44 mm."}, {"start_s": 8215.872, "end_s": 8230.547, "action": "Selected the drawer interior face, activated Push/Pull, and entered 30MM to adjust the face depth; the tool displayed a limited offset while the operation remained active.", "intent": "Adjust the drawer interior geometry by a specified distance.", "app": "SketchUp 2024", "details": "Push/Pull distance entry ended with 30MM."}, {"start_s": 8230.547, "end_s": 8240.145, "action": "Entered and confirmed 50MM, then entered and confirmed 60MM in the active Push/Pull distance field while working on the drawer interior face.", "intent": "Test and set the drawer face offset using precise dimensions.", "app": "SketchUp 2024", "details": "The final visible distance was 60.00 mm."}, {"start_s": 8240.145, "end_s": 8249.736, "action": "Entered 64, corrected the unit text to MM, and confirmed the value in the active distance field.", "intent": "Set the active Push/Pull offset to 64 mm.", "app": "SketchUp 2024", "details": "The final visible distance was 64.00 mm."}, {"start_s": 8249.736, "end_s": 8259.217, "action": "Entered and confirmed 65MM, then began entering 70M in the active distance field.", "intent": "Continue refining the drawer geometry with dimensional Push/Pull inputs.", "app": "SketchUp 2024", "details": "The 70M entry was not shown as confirmed before the span ended."}, {"start_s": 8259.217, "end_s": 8269.346, "action": "Completed and confirmed the 70MM entry, then entered and confirmed 67MM; the drawer interior geometry visibly changed and the distance field showed a new partial entry afterward.", "intent": "Apply a final dimensional adjustment to the drawer interior.", "app": "SketchUp 2024", "details": "The drawer interior face changed from stippled selection to a solid gray surface."}, {"start_s": 8269.346, "end_s": 8279.455, "action": "Selected and orbited the model view around the cabinet, zoomed or panned to a wider front view, and selected the lower drawer assembly for moving; the move tool showed a distance of 30.93 mm.", "intent": "Review the adjusted drawer in context and begin repositioning the drawer assembly.", "app": "SketchUp 2024", "details": "The final view showed the cabinet front with the lower drawer outlined in blue and the Move tool active."}, {"start_s": 8279.455, "end_s": 8292.238, "action": "Navigated around the SketchUp kitchen cabinet model by scrolling and orbiting, then selected the lower drawer/front component and opened its joint configuration.", "intent": "Inspect and configure a cabinet component joint.", "app": "SketchUp 2024", "details": "The lower-left cabinet front became selected and the status indicated joint configuration."}, {"start_s": 8292.238, "end_s": 8301.479, "action": "Opened the Joint configuration dialog, reviewed the slider joint type, and expanded the joint-type menu showing slider and hinge options.", "intent": "Choose the appropriate joint behavior for the selected cabinet component.", "app": "SketchUp 2024", "details": "The dialog showed Open and Close controls, an animation time of 1 second, and the joint-type dropdown."}, {"start_s": 8301.479, "end_s": 8311.198, "action": "Selected hinge from the joint-type menu and returned to the model view with the Joint configuration dialog showing hinge; adjusted the view around the cabinet while the joint axis remained to be selected.", "intent": "Configure the selected cabinet component as a hinged joint.", "app": "SketchUp 2024", "details": "The hinge type was visible and red hinge-axis guides appeared in the model."}, {"start_s": 8311.198, "end_s": 8318.101, "action": "Navigated to a close-up of the lower cabinet front and manipulated the view/component, leaving the drawer/front extended outward from the cabinet.", "intent": "Inspect the configured cabinet movement and positioning.", "app": "SketchUp 2024", "details": "The lower front was visibly pulled outward, with a measured distance shown in the status area."}, {"start_s": 8318.101, "end_s": 8329.415, "action": "Paused on the close-up of the extended cabinet front and then pressed Escape, leaving the component in view.", "intent": "Review the cabinet component state and exit the active operation.", "app": "SketchUp 2024", "details": "No additional visible model change followed the Escape key."}, {"start_s": 8329.415, "end_s": 8339.453, "action": "Navigated around the SketchUp model with scrolling and orbiting, zoomed out to review the full kitchen layout, then zoomed back toward the cabinet and selected the lower-left front.", "intent": "Review the configured cabinet within the overall kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the L-shaped kitchen cabinetry with the lower-left front visible."}, {"start_s": 8339.453, "end_s": 8349.127, "action": "Clicked repeatedly on the lower cabinet area, used middle-button navigation and scrolling to zoom and reposition the SketchUp view, then sent undo keystrokes while inspecting the selected geometry.", "intent": "Inspect and adjust the cabinet model view or selection.", "app": "SketchUp 2024", "details": "Close-up views of the lower drawer/front panel were shown, with blue selection outlines."}, {"start_s": 8349.127, "end_s": 8358.816, "action": "Used scrolling and middle-button navigation to reframe the cabinet, then clicked the lower drawer and adjacent central panel to change the active selection.", "intent": "Inspect different cabinet components in the model.", "app": "SketchUp 2024", "details": "The lower drawer was selected first, followed by the large central panel."}, {"start_s": 8358.816, "end_s": 8370.253, "action": "Navigated around the cabinet with middle-button clicks and scrolling, shifting between close and wider views while inspecting the lower drawer and large central panel.", "intent": "Review cabinet geometry and selections from different viewpoints.", "app": "SketchUp 2024", "details": "The large central panel remained outlined in blue in the later close-up."}, {"start_s": 8370.253, "end_s": 8382.579, "action": "Scrolled and clicked around the lower drawer, briefly dragged over the geometry, and then switched back to the active SketchUp window.", "intent": "Inspect or select the lower cabinet drawer before configuring it.", "app": "SketchUp 2024", "details": "The lower drawer became selected; the span ended with SketchUp restored as the active application."}, {"start_s": 8382.579, "end_s": 8391.332, "action": "Opened the Joint configuration dialog, which showed joint type set to slider, and interacted with the Joint axis Select control while the drawer geometry was highlighted in red.", "intent": "Configure a slider joint for the selected cabinet drawer.", "app": "SketchUp 2024", "details": "The dialog also displayed Open and Close position controls and an animation time of 1 second."}, {"start_s": 8391.332, "end_s": 8410.946, "action": "Closed or hid the joint configuration window, navigated and zoomed the model, then selected and dragged the drawer-related geometry while adjusting the view.", "intent": "Position or test the configured drawer joint in the cabinet model.", "app": "SketchUp 2024", "details": "The final view showed the cabinet from farther away with the lower drawer outlined in blue; the status bar showed a distance of approximately 250.00 mm."}, {"start_s": 8410.946, "end_s": 8416.385, "action": "Displayed the Joint configuration dialog in SketchUp and clicked within the dialog, leaving the slider configuration visible over the kitchen model.", "intent": "Adjust or inspect joint settings.", "app": "SketchUp", "details": "The dialog showed joint type slider, Open and Close controls, and a 1-second animation time."}, {"start_s": 8416.385, "end_s": 8432.25, "action": "Reopened or interacted with the Joint configuration dialog, selected the slider joint type, and clicked the Joint axis Select control while the model geometry became highlighted.", "intent": "Configure a slider joint and begin selecting its axis.", "app": "SketchUp", "details": "The Joint axis control remained in selection mode; the model showed red axis indicators and highlighted geometry."}, {"start_s": 8432.25, "end_s": 8446.269, "action": "Navigated and zoomed around the SketchUp kitchen model with middle-clicks and scrolls, while keeping the Joint configuration dialog open; changed the joint type from slider to hinge.", "intent": "Inspect the model and change the joint configuration type.", "app": "SketchUp", "details": "The view moved from a close cabinet view to a wider model view, and the dialog showed hinge with a red circular axis indicator."}, {"start_s": 8446.269, "end_s": 8463.134, "action": "Interacted with the Joint configuration dialog and navigated the model view; changed the joint type back to hinge after viewing the model from a different angle.", "intent": "Review joint behavior and configure a hinge joint.", "app": "SketchUp", "details": "The dialog alternated through joint-type controls while the model view was rotated or zoomed; hinge and a circular rotation guide were visible."}, {"start_s": 8463.134, "end_s": 8467.49, "action": "Rotated and zoomed the SketchUp model with middle-click and scroll actions, leaving the Joint configuration dialog open with the joint type field blank.", "intent": "Inspect the model while preparing another joint-type selection.", "app": "SketchUp", "details": "The kitchen model was shown from a wider angle and the dialog still offered Open and Close controls."}, {"start_s": 8467.49, "end_s": 8479.445, "action": "Selected slider and then hinge in the Joint configuration dialog while scrolling and navigating the model, ending with hinge selected and its circular rotation guide visible.", "intent": "Compare or configure joint types for the model component.", "app": "SketchUp", "details": "The final view showed the Joint configuration dialog set to hinge, with Select axis and Open/Close controls over the kitchen model."}, {"start_s": 8479.445, "end_s": 8490.135, "action": "Reviewed the SketchUp model with the Joint configuration dialog open, keeping the joint type set to hinge while orbiting or scrolling the view; then hid the application window.", "intent": "Inspect the configured hinge joint and surrounding model geometry.", "app": "SketchUp 2024", "details": "The dialog showed Select, Open, Close, Animation Time 1, and Close window controls."}, {"start_s": 8490.135, "end_s": 8508.449, "action": "Clicked and dragged around the joint area, pressed Escape, hid the dialog or application, and returned to SketchUp with the lower cabinet element selected for joint-base selection.", "intent": "Select a model element as the joint base.", "app": "SketchUp 2024", "details": "The model view ended with the lower cabinet front outlined in blue."}, {"start_s": 8508.449, "end_s": 8522.089, "action": "Reopened the Joint configuration dialog, activated joint-axis selection, changed the joint type from hinge to slider, and scrolled or zoomed the model view while leaving the dialog open.", "intent": "Configure a slider joint and prepare to select its axis.", "app": "SketchUp 2024", "details": "The dialog showed joint type slider, Select, Open, Close, and Animation Time 1."}, {"start_s": 8522.089, "end_s": 8531.616, "action": "Adjusted the SketchUp view around the cabinet and slider-joint guides, using scroll and keyboard input while the Joint configuration dialog remained open.", "intent": "Inspect the slider joint alignment in the model.", "app": "SketchUp 2024", "details": "Red and green joint guides and an upward arrow were visible on the cabinet element."}, {"start_s": 8531.616, "end_s": 8541.037, "action": "Closed or hid the Joint configuration dialog, then clicked and dragged the cabinet element while zooming the model view; left the cabinet geometry and joint guides visible.", "intent": "Manipulate and inspect the configured slider component in the model.", "app": "SketchUp 2024", "details": "The dialog was no longer visible and the cabinet remained in the SketchUp modeling viewport."}, {"start_s": 8541.037, "end_s": 8550.701, "action": "Pressed Escape several times, scrolled to adjust the camera, used undo-like keyboard input, and clicked the model; ended with the dialog closed and the full kitchen model visible in selection mode.", "intent": "Finish the joint inspection and return to the general modeling view.", "app": "SketchUp 2024", "details": "The final view showed the kitchen cabinetry, counters, wall, and floor plan without the configuration dialog."}, {"start_s": 8550.701, "end_s": 8560.478, "action": "Scrolled and clicked repeatedly while moving the selected lower cabinet component, typed \u201cM,\u201d then continued positioning it in the SketchUp model.", "intent": "Position the selected cabinet component within the modeled furniture.", "app": "SketchUp 2024", "details": "The component remained selected and in move mode; the view changed to a wider perspective."}, {"start_s": 8560.478, "end_s": 8565.823, "action": "Waited briefly, then scrolled while the selected cabinet component remained in move mode and moved closer to the cabinet assembly.", "intent": "Adjust the component\u2019s placement and inspect its alignment.", "app": "SketchUp 2024", "details": "The status bar showed an active move operation and endpoint inference."}, {"start_s": 8565.823, "end_s": 8577.04, "action": "Continued adjusting the selected lower cabinet component, then pressed Escape to end the active move operation.", "intent": "Finalize or cancel the current component positioning.", "app": "SketchUp 2024", "details": "The component remained outlined in blue after the move interaction ended."}, {"start_s": 8577.04, "end_s": 8587.384, "action": "Selected the lower cabinet component, used move interactions and typed \u201cM,\u201d then dragged it leftward away from the main cabinet assembly.", "intent": "Separate and reposition the cabinet component for further editing.", "app": "SketchUp 2024", "details": "The final view showed the selected component displaced to the left of the cabinet."}, {"start_s": 8587.384, "end_s": 8597.27, "action": "Scrolled and orbited around the model, changing from a distant exterior view to a close-up of the cabinet face and shelves.", "intent": "Inspect the cabinet geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": "The orbit tool was active and the final view closely framed the shelves and central panel."}, {"start_s": 8597.27, "end_s": 8608.877, "action": "Clicked the central cabinet panel to select it, then scrolled and orbited slightly while keeping the panel selected.", "intent": "Inspect or prepare the central cabinet panel for editing.", "app": "SketchUp 2024", "details": "The central rectangular panel was outlined in blue in the close-up view."}, {"start_s": 8608.877, "end_s": 8621.247, "action": "Scrolled through the SketchUp model and clicked twice in the viewport, leaving the camera slightly farther from the cabinet-like built-in.", "intent": "Inspect the 3D model from a wider view.", "app": "SketchUp 2024", "details": null}, {"start_s": 8621.247, "end_s": 8630.791, "action": "Used keyboard shortcuts and middle-button navigation to zoom toward the built-in, then clicked the lower front panel so it became selected.", "intent": "Navigate to and select a specific cabinet panel.", "app": "SketchUp 2024", "details": "The final view is a close-up of the selected lower panel."}, {"start_s": 8630.791, "end_s": 8641.021, "action": "Clicked the lower panel and orbited/zoomed around the cabinet, ending with the lower-left panel selected in a close-up view.", "intent": "Inspect the cabinet panel geometry from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 8641.021, "end_s": 8651.384, "action": "Used keyboard shortcuts and middle-button navigation to orbit and zoom around the built-in, reviewing the drawers, shelves, and large center panel.", "intent": "Review the modeled cabinet components and their placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 8651.384, "end_s": 8661.223, "action": "Scrolled and navigated the close-up, then selected the lower-left drawer/panel and began a move or copy operation, dragging it while a distance readout appeared.", "intent": "Adjust or duplicate the selected cabinet drawer/panel.", "app": "SketchUp 2024", "details": "The selected geometry remains active with the Move tool and a visible distance measurement."}, {"start_s": 8661.223, "end_s": 8671.99, "action": "Scrolled while continuing the active Move operation on the selected upper drawer/panel, changing the camera view and the displayed distance measurement.", "intent": "Position the selected cabinet panel during the move operation.", "app": "SketchUp 2024", "details": "The Move tool remains active; the selected panel is highlighted and the distance readout changes."}, {"start_s": 8671.99, "end_s": 8681.365, "action": "Clicked and scrolled around the cabinet model, then clicked the selected lower-left drawer/front component while the Move tool remained active.", "intent": "Adjust or inspect the selected cabinet component.", "app": "SketchUp 2024", "details": "The lower-left rectangular front remained outlined in blue as the view shifted closer."}, {"start_s": 8681.365, "end_s": 8691.045, "action": "Clicked and orbited/zoomed around the cabinet, briefly using the spacebar and selecting the upper-left drawer/front area; ended on a close view of the drawer faces.", "intent": "Inspect the cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The view changed from a full cabinet elevation to a close-up of the three drawer fronts."}, {"start_s": 8691.045, "end_s": 8700.172, "action": "Orbited and scrolled into the right side of the cabinet, then repeatedly clicked the narrow horizontal strip near the right edge until it became selected.", "intent": "Select the cabinet strip or adjacent face for editing.", "app": "SketchUp 2024", "details": "The final view showed the long narrow strip highlighted with a dotted selection pattern."}, {"start_s": 8700.172, "end_s": 8711.685, "action": "Typed P to activate Push/Pull, clicked the selected narrow strip, and adjusted its face; clicked again near the right end, leaving the tool active with a displayed distance of 0.00 mm.", "intent": "Modify the depth or thickness of the selected cabinet strip.", "app": "SketchUp 2024", "details": "Push/Pull controls were visible and the narrow strip remained selected."}, {"start_s": 8711.685, "end_s": 8721.442, "action": "Scrolled and dragged on the selected strip, then clicked near its right end while Push/Pull remained active; continued scrolling and typed a space before clicking the cabinet area.", "intent": "Continue editing or inspect the selected strip and cabinet geometry.", "app": "SketchUp 2024", "details": "The camera moved from a close-up of the strip to a distant view of the cabinet."}, {"start_s": 8721.442, "end_s": 8731.31, "action": "Dragged and clicked around the cabinet, then orbited and scrolled to reposition the camera for a wider angled view of the full cabinet run.", "intent": "Review the cabinet model from an overall perspective.", "app": "SketchUp 2024", "details": "The final view showed the three drawers, central panel, open right compartment, and surrounding wall/floor."}, {"start_s": 8731.31, "end_s": 8741.461, "action": "Orbited and zoomed the SketchUp camera around the cabinet model, clicked the central front panel, and left it selected.", "intent": "Inspect and select the central cabinet panel.", "app": "SketchUp 2024", "details": "Displayed a cabinet with drawers, a central panel, an open right compartment, and slatted backing."}, {"start_s": 8741.461, "end_s": 8761.461, "action": "Adjusted the orbit view slightly while keeping the central cabinet panel selected, then paused.", "intent": "Review the selected panel and surrounding cabinet geometry.", "app": "SketchUp 2024", "details": "No geometry change was visible."}, {"start_s": 8761.461, "end_s": 8781.012, "action": "Scrolled to zoom out and review a wider view of the cabinet assembly while keeping the central panel selected.", "intent": "Inspect the cabinet layout from a wider perspective.", "app": "SketchUp 2024", "details": "The view expanded to include more of the slatted wall and right-side enclosure."}, {"start_s": 8781.012, "end_s": 8791.789, "action": "Pressed M to activate Move for the selected central panel, then zoomed and began positioning it away from the cabinet.", "intent": "Move or reposition the selected cabinet panel.", "app": "SketchUp 2024", "details": "The panel appeared offset in front of the cabinet with the Move tool active and a distance readout visible."}, {"start_s": 8791.789, "end_s": 8801.205, "action": "Dragged the selected panel farther toward the right-side area while zooming in closely; the Move tool remained active.", "intent": "Continue positioning the cabinet panel precisely.", "app": "SketchUp 2024", "details": "The view became a close-up of the panel edge and adjacent wall/floor geometry."}, {"start_s": 8801.205, "end_s": 8821.205, "action": "Scrolled and zoomed further into the right open compartment while leaving the Move tool active; no placement click was visible.", "intent": "Inspect the destination area before completing the move.", "app": "SketchUp 2024", "details": "The final view focused closely on the open compartment and its interior surfaces."}, {"start_s": 8821.205, "end_s": 8841.205, "action": "Remained idle while SketchUp displayed the cabinet interior; system configuration, network, power, input, and memory state changes were recorded.", "intent": "Waited with the SketchUp model open.", "app": "SketchUp 2024", "details": "No direct modeling interaction was visible."}, {"start_s": 8841.205, "end_s": 8861.205, "action": "Remained idle on the unchanged SketchUp cabinet-interior view.", "intent": "Paused while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 8861.205, "end_s": 8881.205, "action": "Remained idle while the same SketchUp model view stayed open; system state changes and resume activity were recorded.", "intent": "Waited with the model open.", "app": "SketchUp 2024", "details": "No direct modeling interaction was visible."}, {"start_s": 8881.205, "end_s": 8901.205, "action": "Remained idle on the unchanged cabinet-interior view in SketchUp while system state changes were recorded.", "intent": "Paused while reviewing the model.", "app": "SketchUp 2024", "details": "No direct modeling interaction was visible."}, {"start_s": 8901.205, "end_s": 8913.534, "action": "Scrolled repeatedly in the SketchUp viewport to zoom out and reveal a wider cabinet assembly, including drawers, panels, and the open compartment.", "intent": "Adjusted the camera view to inspect more of the cabinet model.", "app": "SketchUp 2024", "details": "The viewport changed from a close-up interior to a wider perspective."}, {"start_s": 8913.534, "end_s": 8924.678, "action": "Middle-clicked and scrolled in the viewport, clicked a large cabinet panel, and used the Move tool while typing brief inputs; left the panel selected and repositioned in front of the cabinet.", "intent": "Move or position the selected cabinet panel within the model.", "app": "SketchUp 2024", "details": "The selected panel remained outlined in blue, with the Move tool active and a distance value shown."}, {"start_s": 8924.678, "end_s": 8934.684, "action": "Navigated around the SketchUp kitchen model with repeated orbit/pan gestures and clicks, moving from a wider overhead view to a close-up of the cabinetry and wall panel.", "intent": "Inspect the kitchen cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": "A wall or cabinet panel remained selected in blue."}, {"start_s": 8934.684, "end_s": 8945.159, "action": "Zoomed and navigated around the selected panel, then initiated or continued a Move operation, dragging its lower corner along the model; the distance readout changed during the drag.", "intent": "Adjust the position of a selected kitchen model element.", "app": "SketchUp 2024", "details": "The Move tool status and changing distance readout were visible."}, {"start_s": 8945.159, "end_s": 8951.726, "action": "Orbited and repositioned the camera around the kitchen cabinetry, briefly entering an active tool state, and ended on a wider view showing the cabinet run, open cubby, counter, and surrounding walls.", "intent": "Review the cabinet arrangement after the preceding adjustment.", "app": "SketchUp 2024", "details": "The final view showed the kitchen corner from an elevated angle."}, {"start_s": 8951.726, "end_s": 8971.708, "action": "Waited while making a few orbit/zoom gestures and clicked within the SketchUp model, changing from a closer cabinet view to a wider overview of the kitchen corner.", "intent": "Inspect the overall kitchen layout and cabinet placement.", "app": "SketchUp 2024", "details": "No clearly identifiable geometry edit was visible during the mostly inactive interval."}, {"start_s": 8971.708, "end_s": 8982.484, "action": "Zoomed into the cabinet face and open cubby, then activated a drawing tool and began outlining or sizing a rectangular face element along the vertical divider.", "intent": "Create or edit a rectangular cabinet/front element.", "app": "SketchUp 2024", "details": "The drawing tool showed corner handles and a dimensions readout."}, {"start_s": 8982.484, "end_s": 8993.086, "action": "Selected the large right cabinet face, clicked around it, and used the drawing/selection tools; the face changed from stippled selection to a plain white outlined panel, after which SketchUp was hidden and scrolling continued.", "intent": "Finalize or inspect the right cabinet face element.", "app": "SketchUp 2024", "details": "The right cabinet panel was selected before the application became hidden."}, {"start_s": 8993.086, "end_s": 9003.029, "action": "Clicked repeatedly on the cabinet model, entered \u201cP\u201d and \u201c18MM,\u201d and pressed Enter; then clicked elsewhere, leaving the selected cabinet face deselected.", "intent": "Edit or position a cabinet component using a typed dimension or command.", "app": "SketchUp 2024", "details": "The model changed from a selected cabinet face to an unselected cabinet elevation."}, {"start_s": 9003.029, "end_s": 9013.1, "action": "Scrolled and middle-clicked to orbit or adjust the camera around the cabinet assembly, then clicked the drawer unit and left its outlines selected.", "intent": "Inspect the cabinet model from different viewpoints and select the drawer component.", "app": "SketchUp 2024", "details": "The view shifted from a wider cabinet elevation to a closer view of the left drawers."}, {"start_s": 9013.1, "end_s": 9022.334, "action": "Scrolled and dragged across the cabinet faces, clicked repeatedly on the lower drawer area, and orbited the view; typed \u201cM\u201d near the end.", "intent": "Select and begin manipulating a cabinet drawer or component.", "app": "SketchUp 2024", "details": "The lower drawer became outlined in blue, indicating selection."}, {"start_s": 9022.334, "end_s": 9034.429, "action": "Clicked the selected lower drawer and moved it along an inferred direction, adjusting its position by roughly 25\u201326 mm.", "intent": "Reposition the lower cabinet drawer within the model.", "app": "SketchUp 2024", "details": "The lower drawer remained selected while the Move tool displayed a distance of approximately 26 mm."}, {"start_s": 9034.429, "end_s": 9041.925, "action": "Orbited and scrolled around the cabinet, then clicked the lower drawer to select it and began another move operation.", "intent": "Inspect the drawer placement and prepare a further adjustment.", "app": "SketchUp 2024", "details": "The camera moved to the cabinet\u2019s left side; the lower drawer was selected with move handles visible."}, {"start_s": 9041.925, "end_s": 9052.195, "action": "Clicked and orbited around the selected lower drawer, scrolled to zoom or reposition the view, and clicked its lower-left area while continuing the Move tool operation.", "intent": "Fine-tune the lower drawer\u2019s position from a close side view.", "app": "SketchUp 2024", "details": "The selected drawer remained outlined in blue, with the Move tool active and the displayed distance reduced to about 0.38 mm."}, {"start_s": 9052.195, "end_s": 9060.575, "action": "Orbit and scroll around the lower drawer area, then click to change the active SketchUp tool and adjust the view.", "intent": "Inspect the cabinet model from a closer angle.", "app": "SketchUp 2024", "details": "The lower drawer/front remains visible and the view changes to a close-up."}, {"start_s": 9060.575, "end_s": 9071.093, "action": "Orbit and scroll around the cabinet, moving from a close-up of the drawer fronts to a wider three-quarter view.", "intent": "Review the cabinet geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": "The full cabinet front and side become visible."}, {"start_s": 9071.093, "end_s": 9076.836, "action": "Select the lower drawer/front and activate the Move tool, leaving the object selected with move grips visible.", "intent": "Prepare the lower drawer component for repositioning.", "app": "SketchUp 2024", "details": "A single character keypress occurs while the lower drawer is selected."}, {"start_s": 9076.836, "end_s": 9096.836, "action": "Move the selected lower drawer component outward along the green axis and leave it in a partially extended position.", "intent": "Reposition the lower drawer within the cabinet model.", "app": "SketchUp 2024", "details": "The SketchUp distance readout changes during the ongoing move, ending with the drawer extended from the cabinet."}, {"start_s": 9096.836, "end_s": 9116.836, "action": "Continue adjusting the selected lower drawer along the green axis, shifting it between extended and nearer positions without completing the placement.", "intent": "Fine-tune the drawer position.", "app": "SketchUp 2024", "details": "The drawer remains selected and the Move tool distance readout stays active."}, {"start_s": 9116.836, "end_s": 9123.686, "action": "Cancel the active move, orbit and scroll to a wider cabinet view, then click the toolbar gear/control.", "intent": "End the drawer adjustment and change the modeling view/tool state.", "app": "SketchUp 2024", "details": "The lower drawer returns flush with the cabinet front, and the final view shows the cabinet from farther away."}, {"start_s": 9123.686, "end_s": 9132.612, "action": "Opened the Joint configuration dialog, changed the joint type from hinge to slider, and interacted with the joint-axis selection control.", "intent": "Configure the selected kitchen component's joint behavior.", "app": "SketchUp", "details": "The dialog showed slider selected by the end of the span; the model displayed joint movement guides."}, {"start_s": 9132.612, "end_s": 9145.453, "action": "Returned to the SketchUp model, clicked the joint configuration control, and scrolled while viewing the slider joint from a changed camera position.", "intent": "Inspect the slider joint and its placement on the model.", "app": "SketchUp", "details": "The Joint configuration dialog remained visible with slider selected and the joint-axis control disabled."}, {"start_s": 9145.453, "end_s": 9154.229, "action": "Scrolled through the model view, then clicked the upper-right toolbar area and hid the active SketchUp window.", "intent": "Navigate the model and adjust the active tool or view.", "app": "SketchUp", "details": "The slider configuration dialog was visible before the window was hidden."}, {"start_s": 9154.229, "end_s": 9161.635, "action": "Clicked and scrolled in the model, used middle-button view navigation, and zoomed out to reveal more of the kitchen layout.", "intent": "Reposition the 3D camera to inspect the joint in context.", "app": "SketchUp", "details": "The resulting view showed the wider L-shaped kitchen and the extended drawer-like component."}, {"start_s": 9161.635, "end_s": 9169.308, "action": "Used middle-button navigation and slight scrolling to orbit and adjust the view around the kitchen model.", "intent": "Inspect the configured component from another angle.", "app": "SketchUp", "details": "The drawer-like component remained extended from the left cabinet."}, {"start_s": 9169.308, "end_s": 9179.012, "action": "Clicked the drawer-like component to select it, then clicked the upper-right toolbar control while leaving the wider kitchen view displayed.", "intent": "Select the configured kitchen component and adjust the active SketchUp tool.", "app": "SketchUp", "details": "The component became outlined in blue in the final view."}, {"start_s": 9179.012, "end_s": 9187.781, "action": "Clicked and scrolled around the cabinet model, then orbited the SketchUp view to inspect the drawers and surrounding cabinetry.", "intent": "Inspect the cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 9187.781, "end_s": 9197.614, "action": "Scrolled repeatedly and orbited from a wider cabinet view into a close-up of the lower cabinet and adjacent wall trim.", "intent": "Navigate and closely inspect the cabinet area.", "app": "SketchUp 2024", "details": null}, {"start_s": 9197.614, "end_s": 9205.509, "action": "Clicked repeatedly on the close-up cabinet geometry to select it, typed M, and left the selected edges highlighted while preparing a move operation.", "intent": "Select cabinet geometry and initiate a move operation.", "app": "SketchUp 2024", "details": "SketchUp shows selected blue edges and the Move tool status."}, {"start_s": 9205.509, "end_s": 9215.573, "action": "Scrolled and orbited while moving the selected cabinet component; the view shifted to the drawer area and the move distance reached 18.00 mm.", "intent": "Position the selected cabinet component precisely.", "app": "SketchUp 2024", "details": "The Move tool remained active with a visible 18.00 mm distance."}, {"start_s": 9215.573, "end_s": 9225.653, "action": "Scrolled and orbited around the selected lower drawer face, typed a space, and continued the active move until the displayed distance reached 27.99 mm.", "intent": "Continue adjusting the selected drawer geometry.", "app": "SketchUp 2024", "details": "The selected drawer face remained outlined in blue and the Move tool showed 27.99 mm."}, {"start_s": 9225.653, "end_s": 9235.51, "action": "Orbited and scrolled to reposition the view, typed M, then clicked the lower drawer geometry while continuing the move-tool workflow.", "intent": "Refine the selection and continue positioning the lower drawer component.", "app": "SketchUp 2024", "details": "The lower drawer face remained selected with blue edges in the close-up view."}, {"start_s": 9235.51, "end_s": 9243.734, "action": "Adjusted the view around the cabinet corner with middle-button navigation, then clicked the selected corner to continue the active move operation.", "intent": "Refine the view and position for editing the selected cabinet geometry.", "app": "SketchUp 2024", "details": "The Move tool remained active and the distance field showed 0.00 mm."}, {"start_s": 9243.734, "end_s": 9253.446, "action": "Clicked the selected corner repeatedly and moved the active geometry, changing the displayed move distance to 19.42 mm.", "intent": "Position the selected cabinet edge or corner precisely.", "app": "SketchUp 2024", "details": "The selected edges remained highlighted blue while Move was active."}, {"start_s": 9253.446, "end_s": 9264.543, "action": "Entered several keys while keeping the Move operation active, then scrolled the view to inspect the selected corner and adjusted the displayed distance to approximately 12.97 mm before returning to 19.42 mm.", "intent": "Fine-tune the active move placement while inspecting the corner.", "app": "SketchUp 2024", "details": "No readable typed value was captured."}, {"start_s": 9264.543, "end_s": 9274.493, "action": "Clicked and navigated around the model, zooming or orbiting to reveal the cabinet front; then clicked the model and ended with the selection tool active.", "intent": "Inspect the cabinet geometry from a wider angle and change selection state.", "app": "SketchUp 2024", "details": "The view changed from a close corner to the cabinet face and surrounding floor/wall geometry."}, {"start_s": 9274.493, "end_s": 9284.701, "action": "Navigated the camera with middle-button clicks and scrolling, then clicked the upper-left drawer/front panel repeatedly to select it.", "intent": "Reframe the cabinet and select the upper drawer panel for editing.", "app": "SketchUp 2024", "details": "The final view showed the upper drawer panel outlined in blue."}, {"start_s": 9284.701, "end_s": 9293.823, "action": "Scrolled and adjusted the view toward the selected panel corner, then entered the M key and hovered over the corner until the Corner of Joint#1 inference appeared.", "intent": "Prepare to move the selected panel from a specific inferred corner.", "app": "SketchUp 2024", "details": "The Move tool was active at the end, with the corner inference tooltip visible."}, {"start_s": 9293.823, "end_s": 9305.505, "action": "Continued moving a selected cabinet panel or edge with the Move tool, clicking to adjust its position until the displayed distance changed from approximately 24.21 mm to 18.00 mm.", "intent": "Adjust the cabinet panel geometry to fit against the adjacent structure.", "app": "SketchUp 2024", "details": "Selected geometry remained highlighted in blue while the Move tool was active."}, {"start_s": 9305.505, "end_s": 9315.287, "action": "Navigated around the cabinet model with orbit and view adjustments, changing from a close-up to wider front and angled views of the drawers and adjacent panels.", "intent": "Inspect the cabinet geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": "Middle-mouse navigation and scroll events changed the camera view."}, {"start_s": 9315.287, "end_s": 9321.357, "action": "Selected the middle drawer/front panel, entered the M shortcut, and began moving the preselected geometry with the Move tool.", "intent": "Prepare to reposition the selected drawer panel.", "app": "SketchUp 2024", "details": "The panel was outlined in blue and the status bar indicated that Move had begun."}, {"start_s": 9321.357, "end_s": 9338.304, "action": "Kept the selected panel in Move mode while navigating and scrolling around its upper-right corner, maintaining the on-face inference and an 18.00 mm distance display.", "intent": "Position the panel precisely relative to the adjacent cabinet side.", "app": "SketchUp 2024", "details": "The view remained tightly focused on the panel edge and adjacent vertical structure."}, {"start_s": 9338.304, "end_s": 9348.493, "action": "Continued moving the selected panel corner while zooming or navigating closer; the displayed Move distance increased to approximately 32.74 mm.", "intent": "Refine the panel's placement at the cabinet corner.", "app": "SketchUp 2024", "details": "The selected face and move grips remained visible."}, {"start_s": 9348.493, "end_s": 9358.492, "action": "Navigated around the selected geometry and continued the Move operation, ending with the panel corner positioned near the adjoining ledge and a displayed distance of approximately 55.02 mm.", "intent": "Continue aligning the cabinet panel with the surrounding geometry.", "app": "SketchUp 2024", "details": "The Move tool remained active and the geometry stayed highlighted in blue."}, {"start_s": 9358.492, "end_s": 9368.373, "action": "Adjusted the selected cabinet component with the active move tool, then clicked and scrolled around the model.", "intent": "Position the selected cabinet element.", "app": "SketchUp", "details": "The move tool remained active and the distance field changed from about 29.99 mm to 11.99 mm."}, {"start_s": 9368.373, "end_s": 9381.092, "action": "Orbited and navigated around the kitchen cabinet model, selected a central cabinet door, and switched back to the SketchUp window.", "intent": "Inspect and select a cabinet component for configuration.", "app": "SketchUp", "details": "The view changed to a wider cabinet elevation; the central door was highlighted in blue at the end."}, {"start_s": 9381.092, "end_s": 9386.74, "action": "Opened the Joint configuration dialog for the selected cabinet door, then closed or hid the dialog and returned to the model.", "intent": "Configure the cabinet door joint.", "app": "SketchUp", "details": "The dialog showed joint type hinge, Open and Close controls, and an animation time of 1 second; the model displayed joint guides afterward."}, {"start_s": 9386.74, "end_s": 9405.679, "action": "Activated the configured cabinet joint and moved the central cabinet door from closed to an open position.", "intent": "Test the cabinet door hinge motion.", "app": "SketchUp", "details": "The door rotated outward, exposing the cabinet compartment."}, {"start_s": 9405.679, "end_s": 9425.679, "action": "Activated the joint again and returned the central cabinet door from the open position to closed.", "intent": "Reset the cabinet door after testing its motion.", "app": "SketchUp", "details": "The door ended flush with the cabinet front."}, {"start_s": 9425.679, "end_s": 9445.679, "action": "Remained idle while displaying the kitchen cabinet model with the central door closed.", "intent": "Review the completed cabinet configuration.", "app": "SketchUp", "details": null}, {"start_s": 9445.679, "end_s": 9455.778, "action": "Navigated around the SketchUp kitchen model with repeated scrolls and middle-click orbiting, then adjusted the view to show the cabinetry, slatted backsplash, and right-side structure from a wider angle.", "intent": "Inspect the modeled kitchen from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 9455.778, "end_s": 9465.898, "action": "Continued orbiting and zooming around the kitchen model, moving from a close view of the cabinetry to a wider view that included the surrounding floor plan and right-side structure.", "intent": "Review the overall kitchen layout and model context.", "app": "SketchUp 2024", "details": null}, {"start_s": 9465.898, "end_s": 9475.916, "action": "Adjusted the camera with repeated scrolls and middle-click orbiting, shifting between elevated and frontal views of the cabinets, countertop, backsplash, and adjoining wall.", "intent": "Examine the kitchen model from multiple elevations and angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 9475.916, "end_s": 9485.602, "action": "Selected the component tool and navigated closer to the lower cabinetry with orbiting and scrolling, ending on a close-up view of the drawer fronts and countertop edge.", "intent": "Prepare to inspect or place a component on the cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 9485.602, "end_s": 9495.508, "action": "Worked closely on the lower drawer area with clicks and view adjustments; a hardware component became visible on the drawer front, and the final keystroke entered \u201cM\u201d while the component remained in view.", "intent": "Position or manipulate drawer hardware in the SketchUp model.", "app": "SketchUp 2024", "details": "The visible component appears to be a drawer handle or pull."}, {"start_s": 9495.508, "end_s": 9505.964, "action": "Zoomed and panned tightly onto the selected hardware component, leaving it highlighted with SketchUp's Move tool active and an inference tooltip reading \u201cOn Face in Joint#1.\u201d", "intent": "Position the selected hardware component on the drawer face.", "app": "SketchUp 2024", "details": "The component remained selected throughout the close-up view; no completed move was visibly confirmed."}, {"start_s": 9505.964, "end_s": 9516.45, "action": "Selected the drawer handle and adjusted the view with scrolling, then orbited the model with a middle-click.", "intent": "Position and inspect the selected drawer handle in the 3D model.", "app": "SketchUp 2024", "details": "The handle remained selected and the Move tool showed a distance readout."}, {"start_s": 9516.45, "end_s": 9527.796, "action": "Orbited and scrolled the model view around the selected drawer handle.", "intent": "Inspect the handle placement from another angle.", "app": "SketchUp 2024", "details": "The selected handle displayed an On Red Axis inference during the view adjustment."}, {"start_s": 9527.796, "end_s": 9544.41, "action": "Reviewed the model view, then clicked the selected drawer handle twice.", "intent": "Prepare or confirm the handle for a subsequent modeling operation.", "app": "SketchUp 2024", "details": "The handle remained selected with the Move tool active."}, {"start_s": 9544.41, "end_s": 9555.051, "action": "Pressed Space, clicked and dragged around the lower drawer area, orbited and scrolled the view, typed M, and clicked the handle again.", "intent": "Switch tools and manipulate or reposition the drawer handle.", "app": "SketchUp 2024", "details": "The view ended with the handle selected and the Select tool status visible."}, {"start_s": 9555.051, "end_s": 9564.684, "action": "Scrolled and orbited the model, then initiated a copy/move operation on the selected upper handle toward the lower drawer.", "intent": "Duplicate or position a matching drawer handle.", "app": "SketchUp 2024", "details": "A dotted inference line connected the selected upper handle to the lower handle, and the status bar indicated copying."}, {"start_s": 9564.684, "end_s": 9575.171, "action": "Kept the handle in a copy/move operation, then clicked and dragged it along the blue axis.", "intent": "Align the copied handle vertically on the drawer front.", "app": "SketchUp 2024", "details": "The final view showed the selected handle above the existing lower handle with an On Blue Axis inference."}, {"start_s": 9575.171, "end_s": 9585.25, "action": "Scrolled around the close-up cabinet model and clicked the middle drawer handle, leaving the handle selected.", "intent": "Inspect or position the drawer handle in the model.", "app": "SketchUp", "details": "The middle drawer handle remained highlighted in blue."}, {"start_s": 9585.25, "end_s": 9595.362, "action": "Clicked near the upper drawer, adjusted the view, clicked the cabinet face, and orbited outward to reveal more of the kitchen cabinetry.", "intent": "Reposition the model view and inspect the cabinet assembly.", "app": "SketchUp", "details": "The view changed from a close-up of the drawers to a wider cabinet perspective."}, {"start_s": 9595.362, "end_s": 9600.157, "action": "Orbited and scrolled the SketchUp camera to center the cabinet run and reveal the drawers, adjacent doors, and surrounding wall.", "intent": "Frame the cabinetry for review.", "app": "SketchUp", "details": "The final view showed the cabinet run more frontally."}, {"start_s": 9600.157, "end_s": 9620.157, "action": "Paused with the cabinet model visible and the pointer resting over the toolbar.", "intent": "Review the current SketchUp model view.", "app": "SketchUp", "details": "No recorded interaction occurred during this interval; a toolbar tooltip for Extractor Hood was visible."}, {"start_s": 9620.157, "end_s": 9629.979, "action": "Opened Microsoft Edge to the window3dmodel.com page, encountered an insecure-connection and offline error page, then closed the browser window.", "intent": "Attempt to access the referenced website.", "app": "Microsoft Edge", "details": "The page displayed ERR_INTERNET_DISCONNECTED and a secure-connection warning."}, {"start_s": 9629.979, "end_s": 9634.801, "action": "Switched back toward SketchUp, briefly brought Microsoft Edge forward to the composant-dynamique.com page, then closed it and returned to SketchUp.", "intent": "Attempt to access another reference website and return to the model.", "app": "Microsoft Edge / SketchUp", "details": "Edge again showed an insecure-connection and offline error page before closing."}, {"start_s": 9634.801, "end_s": 9646.707, "action": "Orbit and zoom around the SketchUp kitchen cabinetry, then resize and reposition the Explorer window while keeping the model visible.", "intent": "Inspect the cabinetry model from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 9646.707, "end_s": 9665.124, "action": "Review the kitchen cabinet and backsplash model, then zoom out to reveal more of the surrounding layout.", "intent": "Examine the overall cabinet arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 9665.124, "end_s": 9674.652, "action": "Orbit and zoom around the cabinetry, moving from the front view to a higher view of the countertop, backsplash, and tall units.", "intent": "Inspect the model from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 9674.652, "end_s": 9685.933, "action": "Select the large cabinet face, open its context menu, hide the SketchUp window, and enter the value 2.", "intent": "Modify or inspect the selected cabinet geometry.", "app": "SketchUp 2024", "details": "The context menu shows options including Erase, Hide, Select, Soften, Divide, and FFD."}, {"start_s": 9685.933, "end_s": 9695.906, "action": "Confirm the menu action, activate the Line tool, and begin drawing a line on the cabinet face, leaving the first endpoint set and the second endpoint in progress.", "intent": "Create geometry on the cabinet face.", "app": "SketchUp 2024", "details": "The Line tool is active and the measurements box shows an in-progress length of 637.31 mm."}, {"start_s": 9695.906, "end_s": 9704.388, "action": "Continue the active Line tool operation while orbiting and zooming around the selected cabinet face; position the endpoint at a visible midpoint and set the displayed length to 700.00 mm.", "intent": "Precisely place the new line segment.", "app": "SketchUp 2024", "details": "The endpoint is aligned to a midpoint inference."}, {"start_s": 9704.388, "end_s": 9714.484, "action": "Navigated the SketchUp camera through the model with repeated view movements, then clicked to position the active drawing tool near the cabinet geometry.", "intent": "Inspect and position the view for subsequent modeling.", "app": "SketchUp", "details": null}, {"start_s": 9714.484, "end_s": 9723.908, "action": "Orbited the SketchUp view around the cabinet area with middle-mouse drags and minor scrolling, then pressed Space.", "intent": "Adjust the camera angle and return to selection/navigation.", "app": "SketchUp", "details": null}, {"start_s": 9723.908, "end_s": 9739.642, "action": "Clicked the right cabinet panel repeatedly, leaving the panel highlighted with a stippled selection pattern.", "intent": "Select the cabinet panel for editing.", "app": "SketchUp", "details": "The right panel is visibly selected."}, {"start_s": 9739.642, "end_s": 9751.627, "action": "Activated the offset tool, clicked the selected cabinet panel, and entered an offset value of 1.", "intent": "Create an inset or offset boundary on the cabinet panel.", "app": "SketchUp", "details": "The offset distance field shows 1."}, {"start_s": 9751.627, "end_s": 9761.562, "action": "Entered 8MM as the offset distance and pressed Enter, then clicked the model to complete the operation.", "intent": "Apply an 8 mm offset to the cabinet panel.", "app": "SketchUp", "details": "The resulting panel shows an inset rectangular boundary."}, {"start_s": 9761.562, "end_s": 9771.346, "action": "Orbited the SketchUp camera around the cabinet and adjacent wall, changing from a close frontal view to a higher angled overview.", "intent": "Inspect the modified cabinet geometry from another angle.", "app": "SketchUp", "details": null}, {"start_s": 9771.346, "end_s": 9782.442, "action": "Scrolled repeatedly and middle-clicked around the cabinet model, orbiting the SketchUp view to inspect the corner cabinetry and adjacent walls.", "intent": "Inspect the 3D kitchen model from different angles.", "app": "SketchUp", "details": null}, {"start_s": 9782.442, "end_s": 9791.498, "action": "Clicked repeatedly on the right cabinet face, then selected it and orbited/zoomed out to reveal the full L-shaped kitchen layout.", "intent": "Select and review the cabinet component within the overall model.", "app": "SketchUp", "details": "The right cabinet face was visibly selected before the view was widened."}, {"start_s": 9791.498, "end_s": 9801.163, "action": "Opened and dismissed a top-left menu/tool interaction, hid the SketchUp window briefly, then returned to the model and orbited to a higher overhead view.", "intent": "Adjust the modeling view and inspect the kitchen from above.", "app": "SketchUp", "details": null}, {"start_s": 9801.163, "end_s": 9811.329, "action": "Middle-clicked to orbit and clicked the right cabinet face repeatedly; typed \u201cT\u201d and continued navigating until the guide tool was active while the face remained selected.", "intent": "Position the view and begin placing or measuring a guide on the cabinet geometry.", "app": "SketchUp", "details": "The status bar showed the guide tool and a length readout."}, {"start_s": 9811.329, "end_s": 9820.169, "action": "Clicked near the countertop, typed a space and \u201cP,\u201d then clicked the cabinet face while orbiting slightly; the selected face and guide-related measurement remained visible.", "intent": "Continue manipulating the cabinet geometry and guide placement.", "app": "SketchUp", "details": "The selected right cabinet face was visible with a guide line across the model."}, {"start_s": 9820.169, "end_s": 9830.219, "action": "Scrolled and middle-clicked to orbit, clicked and dragged on the countertop/cabinet area, then used Push/Pull on the selected cabinet face and orbited out to a wider model view.", "intent": "Modify the selected cabinet face and review the resulting kitchen model from a wider angle.", "app": "SketchUp", "details": "The Push/Pull tool was active with a distance readout, and the final view showed the wider kitchen layout."}, {"start_s": 9830.219, "end_s": 9840.299, "action": "Navigated closer to the cabinet-like model with middle-clicks and scroll gestures, then pressed an undo shortcut.", "intent": "Adjust the 3D view and possibly revert a recent modeling change.", "app": "SketchUp 2024", "details": null}, {"start_s": 9840.299, "end_s": 9860.299, "action": "Remained idle while viewing the cabinet model; the right compartment appeared closed during the interval.", "intent": "Review the current model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 9860.299, "end_s": 9869.931, "action": "Selected the left cabinet panel, activated a modeling tool with F, and clicked near its upper edge before pressing Escape.", "intent": "Prepare or adjust the selected cabinet panel using a modeling tool.", "app": "SketchUp 2024", "details": null}, {"start_s": 9869.931, "end_s": 9877.922, "action": "Undid the prior operation, reactivated the tool with F, and clicked the selected left panel to create a smaller rectangular offset region.", "intent": "Create an inset or offset feature on the left cabinet panel.", "app": "SketchUp 2024", "details": null}, {"start_s": 9877.922, "end_s": 9887.681, "action": "Entered 18MM and confirmed it, applying the dimension to the rectangular offset; then adjusted the view with middle-clicks and scroll gestures.", "intent": "Set the offset distance for the panel feature and inspect the result.", "app": "SketchUp 2024", "details": null}, {"start_s": 9887.681, "end_s": 9896.065, "action": "Adjusted the view, selected the left panel, pressed P, and used the face-editing tool to pull the selected face outward; the distance readout reached about 174.08 mm.", "intent": "Extrude the inset left cabinet face to add depth to the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 9896.065, "end_s": 9906.522, "action": "Revealed SketchUp and navigated around the selected cabinet face with middle-button orbiting and scrolling, changing from a close-up to a wider view of the L-shaped cabinet.", "intent": "Inspect the cabinet model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 9906.522, "end_s": 9916.418, "action": "Orbited and zoomed around the cabinet assembly, briefly switching tools and ending on a closer view of the open cabinet section and adjacent panel.", "intent": "Continue inspecting the cabinet geometry and positioning the view.", "app": "SketchUp 2024", "details": null}, {"start_s": 9916.418, "end_s": 9924.642, "action": "Orbited and zoomed out to reframe the cabinet against the surrounding walls, showing the open compartment and neighboring closed panel.", "intent": "Review the cabinet layout from a broader angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 9924.642, "end_s": 9938.091, "action": "Adjusted the camera with orbiting and scrolling, then clicked the right cabinet panel to select its face.", "intent": "Position the view and select the cabinet panel for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 9938.091, "end_s": 9948.715, "action": "Selected the right cabinet panel and activated a drawing tool; the SketchUp window was then hidden, and keyboard input was entered afterward.", "intent": "Begin editing the selected cabinet panel, though the resulting operation is not visible.", "app": "SketchUp 2024", "details": "The application was hidden at 9942.86s; later typing was not visually observable."}, {"start_s": 9948.715, "end_s": 9958.665, "action": "Clicked the right cabinet panel and drew horizontal line segments across it, leaving visible guide geometry on the panel.", "intent": "Divide or mark the cabinet panel with horizontal construction geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 9958.665, "end_s": 9968.848, "action": "Scrolled and adjusted the SketchUp view, then clicked the upper-right cabinet face and activated Push/Pull on it.", "intent": "Modify the upper-right cabinet compartment geometry.", "app": "SketchUp", "details": "The upper-right face became selected and the Push/Pull distance field was active."}, {"start_s": 9968.848, "end_s": 9978.576, "action": "Orbited and zoomed around the cabinet, then clicked the countertop and upper-right cabinet area while using modeling controls.", "intent": "Inspect and adjust the cabinet model from different viewpoints.", "app": "SketchUp", "details": "The view changed to a higher, closer perspective and the countertop was targeted with Push/Pull."}, {"start_s": 9978.576, "end_s": 9995.146, "action": "Continued orbiting and zooming around the cabinet, selected model faces, entered keyboard commands, and switched to Windows Explorer at the end of the span.", "intent": "Continue editing and reviewing the cabinet model before changing applications.", "app": "SketchUp", "details": "The final SketchUp view showed the cabinet from farther back with a right-side interior face selected."}, {"start_s": 9995.146, "end_s": 9999.555, "action": "Returned to SketchUp, dragged on the cabinet model, and entered a keyboard command while the Windows power-user menu was briefly open.", "intent": "Resume cabinet modeling after the application switch.", "app": "SketchUp", "details": "The power-user menu was dismissed and the cabinet remained visible in SketchUp."}, {"start_s": 9999.555, "end_s": 10003.639, "action": "Opened Windows Search/Start, left it inactive briefly, then clicked back into SketchUp.", "intent": "Switch away from Search and return to the modeling workspace.", "app": "Windows Search; SketchUp", "details": "The Start/Search panel displayed application tiles before SketchUp was reactivated."}, {"start_s": 10003.639, "end_s": 10013.106, "action": "Returned to SketchUp, adjusted the view, and repeatedly clicked the middle-right cabinet drawer/front face until it became selected.", "intent": "Select and inspect the middle-right cabinet component for further editing.", "app": "SketchUp", "details": "The final view was closer to the cabinet, with the middle-right drawer/front face highlighted."}, {"start_s": 10013.106, "end_s": 10025.097, "action": "Adjusted the SketchUp view around the cabinet using middle-click navigation and exited the active tool with Escape.", "intent": "Inspect the cabinet model from a clearer angle.", "app": "SketchUp", "details": "The view remained focused on the open shelving and drawers."}, {"start_s": 10025.097, "end_s": 10035.346, "action": "Navigated closer to the cabinet, selected the middle drawer/front area, and activated an offset operation on its face.", "intent": "Modify the cabinet drawer/front geometry.", "app": "SketchUp", "details": "The selected face showed the offset tool and a distance of 76.23 mm."}, {"start_s": 10035.346, "end_s": 10044.53, "action": "Dragged the selected upper drawer/front face to offset it, then selected the upper face again and began another offset adjustment.", "intent": "Refine the cabinet drawer/front geometry.", "app": "SketchUp", "details": "The upper right cabinet section was modified and remained in an active offset state."}, {"start_s": 10044.53, "end_s": 10064.53, "action": "Continued the offset adjustment on the selected upper cabinet face while the SketchUp view remained otherwise unchanged.", "intent": "Continue shaping the cabinet front.", "app": "SketchUp", "details": "System configuration changes occurred during the interval; no additional visible interaction was recorded."}, {"start_s": 10064.53, "end_s": 10083.315, "action": "Zoomed and navigated closer to the cabinet, leaving the upper right face selected in the active offset operation.", "intent": "Inspect the adjusted cabinet face at closer scale.", "app": "SketchUp", "details": "The selected upper section filled more of the view."}, {"start_s": 10083.315, "end_s": 10093.577, "action": "Zoomed and orbited away from the cabinet to inspect the broader kitchen run and surrounding walls.", "intent": "Review the overall cabinet layout and model context.", "app": "SketchUp", "details": "The final view showed the wider L-shaped cabinetry, including drawers, doors, and the right-side shelving unit."}, {"start_s": 10093.577, "end_s": 10100.531, "action": "Navigated around the SketchUp cabinet model with middle-clicks and scroll gestures, moving from an overhead view toward the cabinet drawers.", "intent": "Inspect the cabinet geometry from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 10100.531, "end_s": 10109.81, "action": "Selected the upper-right drawer face and adjusted the view with middle-clicks and scrolling, leaving the drawer face highlighted.", "intent": "Select and inspect the upper drawer component.", "app": "SketchUp 2024", "details": null}, {"start_s": 10109.81, "end_s": 10120.161, "action": "Activated the offset tool, selected the upper-right drawer face, and entered an offset value of 18MM, creating an inset rectangular outline.", "intent": "Create an 18 mm inset on the drawer face.", "app": "SketchUp 2024", "details": "The Measurements field shows 18MM."}, {"start_s": 10120.161, "end_s": 10131.571, "action": "Selected the offset drawer geometry and used the Move tool to reposition it, dragging along the visible axis before leaving the component in a move state.", "intent": "Adjust the position of the drawer-front geometry.", "app": "SketchUp 2024", "details": "The Move tool status and distance field remain visible."}, {"start_s": 10131.571, "end_s": 10141.665, "action": "Selected the middle-right drawer face and moved the view closer with scroll gestures, leaving the face selected for further editing.", "intent": "Inspect and prepare the next drawer face for editing.", "app": "SketchUp 2024", "details": "The selected drawer face is highlighted with the Move tool active."}, {"start_s": 10141.665, "end_s": 10151.401, "action": "Selected and moved the left cabinet panel or face, then scrolled to reposition the view; the final view shows the left panel highlighted beside the drawer stack.", "intent": "Adjust or inspect the adjacent cabinet panel.", "app": "SketchUp 2024", "details": "The Move tool remains active and the left panel is selected."}, {"start_s": 10151.401, "end_s": 10162.408, "action": "Selected and edited faces around the cabinet, then zoomed and repositioned the SketchUp view toward the countertop and right-side shelving.", "intent": "Modify and inspect the cabinet geometry.", "app": "SketchUp 2024", "details": "The view moved from the full cabinet toward a close-up of the countertop and upper right compartment."}, {"start_s": 10162.408, "end_s": 10168.759, "action": "Navigated around the cabinet with zooming and middle-button view movement, selected the large left interior face, and moved the view toward the right shelf compartment.", "intent": "Inspect and select cabinet interior faces.", "app": "SketchUp 2024", "details": "The large left cabinet interior face was highlighted, followed by a close-up of the right upper compartment."}, {"start_s": 10168.759, "end_s": 10178.743, "action": "Clicked the upper edge of the right shelf compartment and left that edge selected.", "intent": "Select the shelf edge for subsequent editing.", "app": "SketchUp 2024", "details": "A blue selection line appeared along the upper edge of the right compartment."}, {"start_s": 10178.743, "end_s": 10188.152, "action": "Selected and manipulated the upper shelf edge, then navigated back to a wider cabinet view and selected the left interior face.", "intent": "Adjust or prepare cabinet geometry for editing.", "app": "SketchUp 2024", "details": "The Move tool was active with a distance readout, and the left cabinet interior face was highlighted in the final view."}, {"start_s": 10188.152, "end_s": 10197.978, "action": "Orbited and zoomed around the cabinet, changing from a close frontal view to a lower angled view and then back to a wider frontal view.", "intent": "Inspect the cabinet model from multiple angles.", "app": "SketchUp 2024", "details": "No definite geometry change was visible; the cabinet compartments remained in view while the camera orientation changed."}, {"start_s": 10197.978, "end_s": 10205.072, "action": "Selected the cabinet assembly, then clicked and dragged on the middle drawer/front face and activated Push/Pull on that face.", "intent": "Edit the middle drawer/front geometry.", "app": "SketchUp 2024", "details": "The cabinet was broadly selected before the final middle drawer face became highlighted with the Push/Pull tool active."}, {"start_s": 10205.072, "end_s": 10221.745, "action": "Exited the active push/pull operation, leaving the middle drawer face flush in the cabinet opening.", "intent": "Finish the current cabinet-face adjustment.", "app": "SketchUp 2024", "details": null}, {"start_s": 10221.745, "end_s": 10231.359, "action": "Selected the middle drawer face and pushed it inward, creating a recessed drawer front and exposing the surrounding interior edges.", "intent": "Recess the middle drawer front.", "app": "SketchUp 2024", "details": "The push/pull distance reached approximately -490.75 mm."}, {"start_s": 10231.359, "end_s": 10236.76, "action": "Exited the previous operation, switched to the Offset tool, and clicked the middle drawer face to begin defining an inset border.", "intent": "Create an inset detail on the drawer face.", "app": "SketchUp 2024", "details": null}, {"start_s": 10236.76, "end_s": 10256.76, "action": "Paused with the Offset tool active while the middle drawer face remained selected and an inset outline was visible.", "intent": "Review the pending drawer-face offset.", "app": "SketchUp 2024", "details": "No interaction events were recorded during this interval."}, {"start_s": 10256.76, "end_s": 10273.107, "action": "Entered 18MM and confirmed it, applying the offset to form a rectangular inset border on the middle drawer front.", "intent": "Set the drawer-face inset width to 18 mm.", "app": "SketchUp 2024", "details": "The distance field displayed 18MM after confirmation."}, {"start_s": 10273.107, "end_s": 10278.844, "action": "Scrolled the SketchUp view to zoom and reposition the cabinet, bringing the drawer and adjacent compartment into a closer view.", "intent": "Inspect the adjusted cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 10278.844, "end_s": 10287.674, "action": "Clicked twice on the right edge of the middle drawer/front panel, leaving the edge selected.", "intent": "Select or begin manipulating the drawer edge.", "app": "SketchUp 2024", "details": null}, {"start_s": 10287.674, "end_s": 10296.985, "action": "Typed \u201cM,\u201d clicked the right edge of the middle drawer/front panel, and moved the view or object with several scroll inputs; the Move tool showed a 36.00 mm distance.", "intent": "Move the selected drawer/front geometry.", "app": "SketchUp 2024", "details": "The model view shifted to show more of the cabinet."}, {"start_s": 10296.985, "end_s": 10307.959, "action": "Clicked the middle drawer/front area several times, typed \u201cM,\u201d and selected the large left interior face; the Move tool showed an 18.00 mm distance.", "intent": "Select and reposition cabinet geometry.", "app": "SketchUp 2024", "details": "The large left interior face became stippled/selected."}, {"start_s": 10307.959, "end_s": 10315.16, "action": "Scrolled and clicked the cabinet, then activated the linear dimension tool and selected a point near the upper drawer edge; the view zoomed in and displayed a 36.00 mm measurement while awaiting the second point.", "intent": "Measure the cabinet edge spacing.", "app": "SketchUp 2024", "details": "The status bar indicated that the second point for the linear dimension was being selected."}, {"start_s": 10315.16, "end_s": 10325.241, "action": "Pressed Escape to cancel the active dimension operation.", "intent": "Cancel the incomplete measurement.", "app": "SketchUp 2024", "details": null}, {"start_s": 10325.241, "end_s": 10334.809, "action": "Scrolled to adjust the cabinet view, clicked the upper horizontal drawer edge, and typed \u201cM\u201d; the horizontal edge became highlighted.", "intent": "Select and prepare to move the upper drawer edge.", "app": "SketchUp 2024", "details": "The view remained zoomed on the upper cabinet opening and drawer front."}, {"start_s": 10334.809, "end_s": 10344.849, "action": "Selected and adjusted cabinet geometry, then orbited and scrolled the SketchUp view around the shelving unit.", "intent": "Inspect and manipulate the cabinet model.", "app": "SketchUp", "details": null}, {"start_s": 10344.849, "end_s": 10354.083, "action": "Selected the middle drawer/front face and orbited the model to view the cabinet from above and at an angle.", "intent": "Inspect the selected cabinet component from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 10354.083, "end_s": 10363.811, "action": "Scrolled and orbited extensively, zooming out from the cabinet to an exterior view of the larger kitchen model.", "intent": "Navigate the 3D model and inspect the cabinet in context.", "app": "SketchUp", "details": null}, {"start_s": 10363.811, "end_s": 10373.971, "action": "Scrolled and orbited around the model, moving from a distant exterior view back toward the cabinet and shelving area.", "intent": "Reposition the 3D camera for closer inspection.", "app": "SketchUp", "details": null}, {"start_s": 10373.971, "end_s": 10383.691, "action": "Scrolled and orbited to center the cabinet, then activated the dimension tool and began measuring an edge near the shelving unit.", "intent": "Measure cabinet geometry.", "app": "SketchUp", "details": "A temporary dimension reading of about 510.86 mm appeared."}, {"start_s": 10383.691, "end_s": 10391.341, "action": "Exited the prior measurement state, selected an edge near the middle shelf, and started another linear measurement while scrolling the view slightly.", "intent": "Measure a second cabinet dimension.", "app": "SketchUp", "details": "A temporary dimension reading of about 325.90 mm appeared."}, {"start_s": 10391.341, "end_s": 10401.299, "action": "Exited the active tool, adjusted the view with scrolling, and clicked the lower drawer/front area, leaving the cabinet geometry selected.", "intent": "Inspect and select the cabinet component for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 10401.299, "end_s": 10411.101, "action": "Clicked the lower cabinet front repeatedly, switched to the Follow Me tool with F, and entered 18MM; the lower front became selected and the measurement field showed approximately 59.79 mm.", "intent": "Edit the lower cabinet front using a measured tool operation.", "app": "SketchUp 2024", "details": "The lower front panel was highlighted with a dotted selection pattern."}, {"start_s": 10411.101, "end_s": 10422.901, "action": "Dragged the lower front geometry, clicked along its right side, entered M, and continued positioning it; the view remained zoomed on the cabinet front.", "intent": "Move or adjust the lower cabinet front geometry.", "app": "SketchUp 2024", "details": "The Move tool was active and the distance readout reached about 103.50 mm."}, {"start_s": 10422.901, "end_s": 10433.755, "action": "Continued the active move operation and clicked the lower front corner, refining the position to an 18.00 mm distance.", "intent": "Precisely position the lower cabinet front edge.", "app": "SketchUp 2024", "details": "The lower front panel remained in view with the Move tool active."}, {"start_s": 10433.755, "end_s": 10443.605, "action": "Scrolled and zoomed around the lower front, clicked its left edge, entered M, and clicked along the bottom-left area; the left-side geometry became selected.", "intent": "Select and adjust adjacent cabinet geometry.", "app": "SketchUp 2024", "details": "The lower front and neighboring left compartment were shown in close view."}, {"start_s": 10443.605, "end_s": 10453.437, "action": "Clicked the upper edge of the lower front, entered M, and scrolled while keeping the edge selected for movement.", "intent": "Prepare to move the lower front\u2019s upper edge.", "app": "SketchUp 2024", "details": "A blue-highlighted horizontal edge remained selected and the Move tool status was visible."}, {"start_s": 10453.437, "end_s": 10467.4, "action": "Selected the lower-right cabinet face and zoomed in on the shelving unit; typed \u201cP\u201d at the end of the interval.", "intent": "Inspect and prepare a cabinet component for editing.", "app": "SketchUp 2024", "details": "The lower-right cabinet face appeared selected with a stippled highlight."}, {"start_s": 10467.4, "end_s": 10477.373, "action": "Clicked and navigated around the cabinet with middle-button orbit/zoom actions, then activated a face-editing tool and dragged on the cabinet area.", "intent": "Adjust the view and begin editing the cabinet geometry.", "app": "SketchUp 2024", "details": "The view changed from a close frontal view to a wider elevated perspective of the cabinet."}, {"start_s": 10477.373, "end_s": 10489.533, "action": "Orbited and zoomed around the cabinet using middle-button interactions and scrolls, reviewing the cabinet front and surrounding enclosure from multiple angles.", "intent": "Review the model geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The cabinet remained visible with one large compartment and three shelves on the right."}, {"start_s": 10489.533, "end_s": 10501.396, "action": "Continued orbiting and zooming out to inspect the cabinet in the broader room, then dragged across the toolbar area and switched to an edge-related editing tool.", "intent": "Reframe the model and select a geometry-editing tool.", "app": "SketchUp 2024", "details": "The final view showed the cabinet from a higher, wider angle with the edge/measurement tool active."}, {"start_s": 10501.396, "end_s": 10511.229, "action": "Zoomed toward the cabinet, dragged on the right shelving geometry with the measurement tool, and entered a space; the view ended with the cabinet front visible.", "intent": "Measure or reference the cabinet shelf geometry.", "app": "SketchUp 2024", "details": "A temporary dimension reading around 339.91 mm was visible during the measurement operation."}, {"start_s": 10511.229, "end_s": 10521.052, "action": "Selected the lower-right cabinet geometry, typed \u201cM,\u201d and used the Move tool to drag the selected lower edge or face; zoomed in further on the edited area.", "intent": "Move and adjust the lower-right cabinet component.", "app": "SketchUp 2024", "details": "The Move tool was active, a blue edge was highlighted, and the distance field showed 36.00 mm."}, {"start_s": 10521.052, "end_s": 10531.291, "action": "Navigated the SketchUp kitchen model with repeated scrolling, middle-button view adjustments, and clicks; ended on a close-up of the cabinet drawers.", "intent": "Inspect and reposition the 3D kitchen model.", "app": "SketchUp 2024", "details": "The upper drawer was selected in the close-up view."}, {"start_s": 10531.291, "end_s": 10536.53, "action": "Displayed the Joint configuration dialog, clicked within the model and dialog, and opened the Joint type menu showing slider and hinge options.", "intent": "Configure a joint for the selected kitchen component.", "app": "SketchUp 2024", "details": "The dialog initially showed hinge as the joint type, with Open, Close, and Animation Time controls."}, {"start_s": 10536.53, "end_s": 10542.097, "action": "Changed the Joint type from hinge to slider and orbited/zoomed the model while leaving the Joint configuration dialog open.", "intent": "Set the selected component to use a sliding joint and inspect its placement.", "app": "SketchUp 2024", "details": "The dialog showed slider selected; the joint axis still required selection."}, {"start_s": 10542.097, "end_s": 10549.955, "action": "Clicked the dialog controls and manipulated the view, returning to the model with the slider joint configuration visible and a CLOSE marker on the cabinet component.", "intent": "Apply or inspect the slider joint position in the kitchen model.", "app": "SketchUp 2024", "details": "The Joint configuration dialog remained open with slider selected and the joint axis control disabled."}, {"start_s": 10549.955, "end_s": 10557.779, "action": "Scrolled and adjusted the view around the cabinet, then clicked the model; the configured drawer appeared extended while the CLOSE marker remained visible, and the dialog was hidden.", "intent": "Inspect the configured sliding drawer motion and resulting model state.", "app": "SketchUp 2024", "details": "The final view showed an open/extended drawer with colored joint-axis guides."}, {"start_s": 10557.779, "end_s": 10577.779, "action": "Remained inactive on the SketchUp view, displaying the extended cabinet drawer and CLOSE marker without recorded interactions.", "intent": "Pause while reviewing the configured model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 10577.779, "end_s": 10589.979, "action": "Clicked the cabinet drawer area twice, changing the upper drawer from closed to open.", "intent": "Preview the drawer\u2019s opening movement.", "app": "SketchUp", "details": null}, {"start_s": 10589.979, "end_s": 10598.611, "action": "Clicked and dragged around the upper drawer, used Escape and undo commands, then clicked and dragged again; the drawer ended partially open.", "intent": "Adjust or test the drawer component while correcting intermediate actions.", "app": "SketchUp", "details": null}, {"start_s": 10598.611, "end_s": 10608.829, "action": "Used undo and navigation inputs, then clicked the model and middle-clicked while zooming or orbiting; the view changed from the close drawer to a wider kitchen-cabinet view.", "intent": "Reframe the model for inspection.", "app": "SketchUp", "details": null}, {"start_s": 10608.829, "end_s": 10618.629, "action": "Middle-clicked and scrolled to orbit and zoom out, then issued undo commands and clicked several cabinet areas; the view widened to show the full L-shaped cabinet run.", "intent": "Inspect the broader cabinet layout and revise recent model actions.", "app": "SketchUp", "details": null}, {"start_s": 10618.629, "end_s": 10638.481, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom around the kitchen cabinetry, clicked cabinet surfaces, and ended with a front-facing view before switching to the recorder application.", "intent": "Review the cabinet model from multiple viewpoints.", "app": "SketchUp", "details": "The final event switched to the recorder application."}, {"start_s": 10638.481, "end_s": 10652.037, "action": "Returned to SketchUp and opened the Joint configuration dialog, showing joint type set to slider; clicked the dialog and opened its joint-type menu, which displayed slider and hinge options.", "intent": "Configure the selected cabinet component\u2019s movement joint.", "app": "SketchUp", "details": "The dialog also showed joint-axis selection, Open and Close position buttons, and a 1-second animation time."}, {"start_s": 10652.037, "end_s": 10658.419, "action": "Switched to SketchUp, navigated around the kitchen model with scroll gestures and middle-button clicks, and changed from a wider view to a closer view of the left cabinet unit.", "intent": "Inspect the kitchen cabinet model from different distances and angles.", "app": "SketchUp", "details": "The model remained unchanged; the view moved around the selected cabinet area."}, {"start_s": 10658.419, "end_s": 10668.151, "action": "Pressed Escape and Space while the SketchUp camera settled on a close view of the drawer cabinet and countertop.", "intent": "Exit the current interaction and continue viewing the model.", "app": "SketchUp", "details": "No visible geometry edit was made."}, {"start_s": 10668.151, "end_s": 10675.963, "action": "Pressed Ctrl+Z, clicked in the model, and used repeated scroll and middle-button navigation to zoom from the close drawer view out to a broader perspective of the kitchen run.", "intent": "Adjust the model view while reviewing the cabinet layout.", "app": "SketchUp", "details": "The visible result was a wider view showing the drawers, base cabinets, corner shelving, and backsplash."}, {"start_s": 10675.963, "end_s": 10686.371, "action": "Used repeated scroll and middle-button orbit/navigation gestures to pull back and rotate around the kitchen, ending on a front perspective of the full cabinet arrangement.", "intent": "Review the overall kitchen layout from a wider angle.", "app": "SketchUp", "details": "The view expanded to include the cabinet run, tall side unit, floor plan outlines, and surrounding walls."}, {"start_s": 10686.371, "end_s": 10693.457, "action": "Scrolled and orbited the model from the wide perspective into a closer inspection of the base cabinets, drawers, doors, corner opening, and open shelving.", "intent": "Inspect cabinet faces and corner storage details.", "app": "SketchUp", "details": "The final view centered the lower cabinets and shelving; no geometry changes were visible."}, {"start_s": 10693.457, "end_s": 10702.347, "action": "Scrolled and orbited around the kitchen corner, shifting from a front view to a higher top-down perspective of the countertop, drawers, base cabinets, backsplash, and open shelving.", "intent": "Continue reviewing the kitchen model from an elevated angle.", "app": "SketchUp", "details": "Navigation only; the modeled kitchen components remained unchanged."}, {"start_s": 10702.347, "end_s": 10711.445, "action": "Scrolled and middle-clicked repeatedly to navigate the SketchUp model, changing from a close-up of the cabinetry to a wider frontal view.", "intent": "Inspect the modeled cabinetry from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 10711.445, "end_s": 10722.389, "action": "Activated the component placement tool, clicked a cabinet handle, then selected another handle on the center cabinet and began moving it; typed Q afterward.", "intent": "Place or reposition cabinet-handle components.", "app": "SketchUp", "details": "The center cabinet handle was selected and the move tool was active."}, {"start_s": 10722.389, "end_s": 10731.475, "action": "Navigated the view, selected the center cabinet handle, and activated the Rotate tool, rotating the handle to an angled orientation.", "intent": "Adjust the orientation of the cabinet-handle component.", "app": "SketchUp", "details": "The Rotate tool showed an angle of about 135 degrees."}, {"start_s": 10731.475, "end_s": 10739.163, "action": "Continued rotating the selected cabinet handle through additional orientations, ending with it nearly vertical.", "intent": "Fine-tune the handle rotation.", "app": "SketchUp", "details": "The rotation guide remained visible and the displayed angle reached 90 degrees."}, {"start_s": 10739.163, "end_s": 10747.414, "action": "Scrolled to reposition the model view while keeping the cabinet handle selected in Rotate mode.", "intent": "Inspect the rotated handle in the cabinet context.", "app": "SketchUp", "details": "The selected handle remained under the rotation guide as the view zoomed or panned."}, {"start_s": 10747.414, "end_s": 10756.555, "action": "Entered 90 and confirmed the rotation, then navigated the view and clicked away, leaving the cabinet assembly visible with the center handle vertical.", "intent": "Finalize the cabinet-handle orientation and review the model.", "app": "SketchUp", "details": "The final view showed the center cabinet with a vertical handle and the other handles horizontal."}, {"start_s": 10756.555, "end_s": 10768.117, "action": "Scrolled and clicked around the cabinet model, then selected the vertical handle on the central cabinet door and typed \u201cM.\u201d", "intent": "Select and begin moving a cabinet handle.", "app": "SketchUp 2024", "details": "The central door handle became highlighted blue."}, {"start_s": 10768.117, "end_s": 10778.187, "action": "Scrolled and clicked the selected handle, activating the Move tool and repositioning the view around the central cabinet door.", "intent": "Adjust the selected handle\u2019s position or prepare it for movement.", "app": "SketchUp 2024", "details": "The handle remained selected with Move-tool controls and a distance readout."}, {"start_s": 10778.187, "end_s": 10788.883, "action": "Orbited and zoomed around the cabinet, then clicked and dragged near the selected handle to continue a move operation.", "intent": "Refine the handle placement on the cabinet door.", "app": "SketchUp 2024", "details": "The selected handle and movement guide remained visible."}, {"start_s": 10788.883, "end_s": 10798.9, "action": "Zoomed in on the cabinet handle, clicked it, and initiated a copy or move operation; a second handle appeared beside the original.", "intent": "Duplicate or reposition the cabinet handle.", "app": "SketchUp 2024", "details": "One handle was selected in blue while another remained visible nearby."}, {"start_s": 10798.9, "end_s": 10811.462, "action": "Zoomed out and orbited to review the overall kitchen cabinetry, then continued navigating the model from a wider perspective.", "intent": "Inspect the cabinet layout and handle placement in the broader model.", "app": "SketchUp 2024", "details": "The view expanded from the cabinet close-up to the full L-shaped kitchen."}, {"start_s": 10811.462, "end_s": 10821.124, "action": "Orbited to an elevated view of the kitchen and clicked repeatedly on the cabinetry, ending with a larger cabinet assembly selected in blue.", "intent": "Review and select the cabinet assembly from above.", "app": "SketchUp 2024", "details": "The final view showed the kitchen from above with the cabinet run highlighted."}, {"start_s": 10821.124, "end_s": 10831.459, "action": "Scrolled and middle-clicked around the cabinet model, then selected cabinet faces and adjusted the view toward the left compartment and shelving.", "intent": "Inspect and position the cabinet model for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 10831.459, "end_s": 10841.549, "action": "Selected the narrow vertical cabinet face, activated Push/Pull, entered 9 mm, and confirmed the extrusion.", "intent": "Modify the cabinet partition depth by 9 mm.", "app": "SketchUp 2024", "details": "The selected face remained highlighted with the Push/Pull distance shown as 9 mm."}, {"start_s": 10841.549, "end_s": 10853.781, "action": "Selected the lower-right shelf face, activated Push/Pull, entered 9 mm, and confirmed the operation.", "intent": "Adjust the depth of the lower-right cabinet shelf by 9 mm.", "app": "SketchUp 2024", "details": "The lower-right shelf face was highlighted during the Push/Pull operation."}, {"start_s": 10853.781, "end_s": 10863.652, "action": "Selected additional cabinet faces and navigated the view, then used the orbit/pan controls to reveal a wider front view of the cabinet.", "intent": "Inspect the edited cabinet geometry from a broader view.", "app": "SketchUp 2024", "details": null}, {"start_s": 10863.652, "end_s": 10874.028, "action": "Scrolled and selected the cabinet divider and shelf edges while zooming and panning closer to the central partition.", "intent": "Continue inspecting and selecting cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 10874.028, "end_s": 10883.939, "action": "Clicked and scrolled around the central divider and shelves, then zoomed out to show the full cabinet run and surrounding countertop area.", "intent": "Review the cabinet model in its overall context.", "app": "SketchUp 2024", "details": "The final view showed the cabinet bank with one large compartment, multiple shelves, and the adjacent countertop."}, {"start_s": 10883.939, "end_s": 10893.883, "action": "Orbited and zoomed around the SketchUp kitchen model, changing from a close interior view to a higher angled view of the cabinets, counters, shelves, and tall unit.", "intent": "Inspect the kitchen cabinet model from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 10893.883, "end_s": 10898.318, "action": "Continued orbiting and zooming outward, revealing the kitchen assembly and surrounding floor-plan geometry from elevated viewpoints.", "intent": "Review the model layout and its context.", "app": "SketchUp 2024", "details": null}, {"start_s": 10898.318, "end_s": 10918.318, "action": "Paused on the SketchUp model, then zoomed farther out to show the kitchen unit within the broader floor-plan drawing.", "intent": "View the kitchen placement within the overall plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 10918.318, "end_s": 10926.932, "action": "Orbited and zoomed back toward the kitchen, moving from a distant overview to a close inspection of the countertop, cabinet fronts, and open shelving.", "intent": "Inspect cabinet details from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 10926.932, "end_s": 10935.684, "action": "Orbited and zoomed closer to the open shelving and adjacent cabinet compartment, ending with a tight view of the shelf interiors.", "intent": "Examine the shelving and cabinet interior geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 10935.684, "end_s": 10945.507, "action": "Held on the close cabinet view, then orbited and adjusted the view to show the open compartment and three shelves from a slightly higher angle.", "intent": "Continue reviewing the cabinet and shelving construction.", "app": "SketchUp 2024", "details": null}, {"start_s": 10945.507, "end_s": 10955.692, "action": "Orbited and zoomed the SketchUp view toward the open shelving and adjacent cabinet, bringing the shelves into close view.", "intent": "Inspect the cabinet shelving geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 10955.692, "end_s": 10965.731, "action": "Adjusted the view around the shelving, pressed R, and used the drawing tool on the upper shelf face, leaving the face ready for editing.", "intent": "Prepare the upper shelf face for a modeling operation.", "app": "SketchUp 2024", "details": "The status bar showed \u201cOn Face in Group\u201d and the drawing tool remained active."}, {"start_s": 10965.731, "end_s": 10975.722, "action": "Selected the upper-right shelf face and entered a group-editing or selection state, with the view changing to a translucent model context.", "intent": "Select the upper shelf component for modification.", "app": "SketchUp 2024", "details": null}, {"start_s": 10975.722, "end_s": 10992.613, "action": "Kept the upper shelf face selected while zooming out and pressed P, leaving the selected face ready for the Push/Pull operation.", "intent": "Prepare to resize or extrude the selected shelf face.", "app": "SketchUp 2024", "details": null}, {"start_s": 10992.613, "end_s": 11012.613, "action": "Activated Push/Pull on the selected upper shelf face and dragged it outward, creating a protruding rectangular block from the shelving unit.", "intent": "Extrude the upper shelf face to form a drawer-like component.", "app": "SketchUp 2024", "details": "The Push/Pull distance field showed approximately 666.86 mm and later 634.63 mm."}, {"start_s": 11012.613, "end_s": 11023.149, "action": "Entered 56 into the active Push/Pull distance field, leaving the protruding block selected for the numeric dimension.", "intent": "Set the extrusion distance numerically.", "app": "SketchUp 2024", "details": "The distance field displayed 5 while the final key events entered 56."}, {"start_s": 11023.149, "end_s": 11032.676, "action": "Deleted the previous distance entry, typed 580, and pressed Enter while editing the selected drawer-like box.", "intent": "Set the modelled feature's distance to 580.", "app": "SketchUp 2024", "details": "The selected box remains visible in the cabinet model."}, {"start_s": 11032.676, "end_s": 11042.355, "action": "Navigated around the cabinet model with middle-button views and scrolling, then clicked the box and cleared its selection.", "intent": "Inspect and adjust the model view and selected cabinet component.", "app": "SketchUp 2024", "details": "The view ends on the cabinet opening and projecting box without selection highlighting."}, {"start_s": 11042.355, "end_s": 11050.555, "action": "Navigated and zoomed toward the box, selected its top face, activated the Offset tool, and typed F as an offset-related input.", "intent": "Create an inset or offset detail on the box's top face.", "app": "SketchUp 2024", "details": "The top face is selected and shows an inner rectangular outline; the Offset tool is active."}, {"start_s": 11050.555, "end_s": 11061.54, "action": "Kept the Offset tool active and entered 4 as the distance value for the selected top-face offset.", "intent": "Set the offset distance for the inset top detail.", "app": "SketchUp 2024", "details": "The status bar shows the Offset tool and a distance value of 4."}, {"start_s": 11061.54, "end_s": 11074.716, "action": "Entered 0MM and pressed Enter, then entered 25MM and pressed Enter in the Offset tool; the top face displayed a bordered inset region.", "intent": "Finalize offset distances for the top-face detail.", "app": "SketchUp 2024", "details": "The visible distance field progresses through 40MM and ends at 25MM; the inset border remains on the box top."}, {"start_s": 11074.716, "end_s": 11083.133, "action": "Entered 20MM and pressed Enter while the Offset tool remained active on the top face.", "intent": "Set the next offset distance for the top-face detail.", "app": "SketchUp 2024", "details": "The model remains focused on the box top with the inset border visible and the distance field ending at 20MM."}, {"start_s": 11083.133, "end_s": 11092.37, "action": "Selected the top face of the modeled drawer or box component.", "intent": "Select the component face for further editing.", "app": "SketchUp", "details": "The top face became stippled to indicate selection."}, {"start_s": 11092.37, "end_s": 11102.378, "action": "Zoomed in, selected an edge on the top face, and activated the Move tool.", "intent": "Prepare to reposition or edit the selected model edge.", "app": "SketchUp", "details": "The selected edge appeared blue and the Move tool showed a 20.00 mm distance field."}, {"start_s": 11102.378, "end_s": 11112.133, "action": "Zoomed back, selected the top face, activated a push/pull-style tool, and entered a distance value of 64.", "intent": "Modify the height or depth of the selected face.", "app": "SketchUp", "details": "The face remained selected and the tool displayed a distance of approximately 97.39 mm."}, {"start_s": 11112.133, "end_s": 11123.655, "action": "Entered additional dimension text, confirmed it, orbited the model, and began adjusting the selected face; the view changed to a wider perspective of the drawer assembly.", "intent": "Continue shaping the modeled drawer component while inspecting it from different angles.", "app": "SketchUp", "details": "The final view showed the component within the surrounding kitchen cabinetry, with an offset warning of approximately -2033 mm visible during the edit."}, {"start_s": 11123.655, "end_s": 11133.365, "action": "Returned focus to SketchUp, continued the face edit, and entered 190MM followed by Enter.", "intent": "Set the selected face offset or extrusion to 190 mm.", "app": "SketchUp", "details": "The model updated to show the drawer-like form with the edited face and an active distance field."}, {"start_s": 11133.365, "end_s": 11143.211, "action": "Confirmed the edit, dragged and orbited the model, then zoomed and rotated to inspect the resulting drawer placement from overhead and front views.", "intent": "Review the edited drawer geometry and its fit within the cabinet assembly.", "app": "SketchUp", "details": "The final view showed an open drawer front and surrounding cabinet compartments."}, {"start_s": 11143.211, "end_s": 11152.394, "action": "Navigated around the SketchUp cabinet model by orbiting and zooming, inspecting the open drawers and surrounding compartments.", "intent": "Inspect the cabinet geometry from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 11152.394, "end_s": 11163.011, "action": "Zoomed and orbited closer to the open drawer assembly, then adjusted the view to examine the drawer interior and cabinet framing.", "intent": "Review the drawer assembly and its placement.", "app": "SketchUp", "details": null}, {"start_s": 11163.011, "end_s": 11173.524, "action": "Selected the upper drawer component and began moving it; entered M and repositioned the selected drawer within the cabinet opening while changing the view.", "intent": "Adjust the drawer component's position.", "app": "SketchUp", "details": "The selected drawer remains highlighted and the Move tool is active."}, {"start_s": 11173.524, "end_s": 11182.874, "action": "Orbited and zoomed out to review the selected drawer in the wider cabinet model, then continued positioning it from a broader view.", "intent": "Check the drawer placement relative to the cabinet.", "app": "SketchUp", "details": "The drawer remains selected during the view changes."}, {"start_s": 11182.874, "end_s": 11191.563, "action": "Zoomed tightly onto the cabinet edge and drawer face, then clicked the geometry while the Move tool remained active.", "intent": "Refine or inspect the drawer's alignment at the cabinet edge.", "app": "SketchUp", "details": "The view ends in a close-up with the drawer face selected and an edge-in-group inference visible."}, {"start_s": 11191.563, "end_s": 11203.963, "action": "Typed 18MM into the active SketchUp measurement field while moving the selected cabinet component.", "intent": "Set a precise movement distance for the selected component.", "app": "SketchUp", "details": "The Move tool remains active and the selected drawer component is highlighted."}, {"start_s": 11203.963, "end_s": 11213.641, "action": "Confirmed the current operation, scrolled through the SketchUp model, and changed the view from a close-up cabinet compartment to a distant overview of the model layout.", "intent": "Inspect the model from different zoom levels and viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 11213.641, "end_s": 11223.699, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom around the SketchUp model, moving from the distant layout to an exterior view of the cabinet assembly.", "intent": "Review the model\u2019s exterior geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 11223.699, "end_s": 11233.82, "action": "Continued orbiting and zooming around the model, inspecting the cabinet fronts, wall panels, shelving, and surrounding floor-plan outlines.", "intent": "Examine the modeled cabinetry and related layout from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 11233.82, "end_s": 11243.504, "action": "Selected a large cabinet panel and navigated to a close-up view; activated the Move tool, leaving the panel highlighted with move handles.", "intent": "Prepare the selected cabinet panel for repositioning.", "app": "SketchUp 2024", "details": "The selected panel remains highlighted in blue and the Move tool status is visible."}, {"start_s": 11243.504, "end_s": 11253.545, "action": "Scrolled slightly and manipulated the selected panel with the Move/Copy operation, leaving it selected in close-up with move grips and a distance readout visible.", "intent": "Adjust or copy the cabinet panel\u2019s position.", "app": "SketchUp 2024", "details": "The status bar shows placement instructions and a distance value of approximately 197.71 mm before the later click."}, {"start_s": 11253.545, "end_s": 11265.514, "action": "Clicked the selected cabinet front and entered `18MM` as the move distance, leaving the panel selected in the active Move tool.", "intent": "Specify an exact 18 mm offset for the cabinet component.", "app": "SketchUp 2024", "details": "The Measurements field visibly contains `18MM`."}, {"start_s": 11265.514, "end_s": 11276.48, "action": "Pressed Enter, scrolled and adjusted the SketchUp view, then middle-clicked to orbit around the cabinet and drawer unit.", "intent": "Inspect the cabinet geometry from different angles.", "app": "SketchUp 2024", "details": "The view changed from a wider corner cabinet view to a close-up of the open shelving and drawers."}, {"start_s": 11276.48, "end_s": 11286.632, "action": "Scrolled and orbited around the selected cabinet geometry, briefly typed \u201cM,\u201d and continued navigating to a close-up of the lower cabinet area.", "intent": "Position and prepare cabinet geometry for editing.", "app": "SketchUp 2024", "details": "A cabinet face remained selected with the Move tool active."}, {"start_s": 11286.632, "end_s": 11296.682, "action": "Scrolled through the close-up view and clicked the selected cabinet edge, leaving the geometry in a move/copy state with a distance readout visible.", "intent": "Adjust or copy the selected cabinet component.", "app": "SketchUp 2024", "details": "The selected lower edge and adjacent cabinet side were shown at close range."}, {"start_s": 11296.682, "end_s": 11303.937, "action": "Typed a space and \u201cM,\u201d then clicked the lower drawer face to select or begin moving it.", "intent": "Select the lower drawer component for repositioning.", "app": "SketchUp 2024", "details": "The lower drawer face became outlined in blue."}, {"start_s": 11303.937, "end_s": 11314.12, "action": "Entered 18MM and pressed Enter to set the move distance, then orbited and repositioned the lower drawer within the cabinet opening.", "intent": "Move the lower drawer by a precise 18 mm distance.", "app": "SketchUp 2024", "details": "The drawer was visibly pulled outward and remained selected."}, {"start_s": 11314.12, "end_s": 11324.328, "action": "Scrolled and repeatedly clicked along the upper edge of the lower drawer, selecting and inspecting its edge geometry.", "intent": "Refine or verify the drawer edge alignment.", "app": "SketchUp 2024", "details": "The lower drawer stayed open in close-up, with edge segments highlighted during selection."}, {"start_s": 11324.328, "end_s": 11334.474, "action": "Typed a character, clicked near the cabinet edge, and scrolled while adjusting the close-up view of the countertop and adjacent wall.", "intent": "Inspect or refine the cabinet model from a close perspective.", "app": "SketchUp 2024", "details": "The view remained in an active modeling/editing context with a distance readout visible."}, {"start_s": 11334.474, "end_s": 11344.063, "action": "Clicked and scrolled through the model, then orbited from a close cabinet view to a wider view showing the kitchen assembly and surrounding floor-plan outlines.", "intent": "Review the cabinet layout in relation to the broader model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen unit isolated in the larger SketchUp workspace."}, {"start_s": 11344.063, "end_s": 11354.546, "action": "Orbited and zoomed around the kitchen model, moving from a side view to front and elevated perspectives of the drawers, cabinets, countertop, slatted backsplash, and tall enclosure.", "intent": "Inspect the modeled kitchen from multiple angles.", "app": "SketchUp 2024", "details": "No geometry change was visibly confirmed; the activity primarily changed the camera view."}, {"start_s": 11354.546, "end_s": 11361.433, "action": "Clicked and continued orbiting and zooming around the kitchen, ending on an elevated view of the countertop, drawers, backsplash, and tall cabinet.", "intent": "Continue visual review of the kitchen model.", "app": "SketchUp 2024", "details": "The Select tool was visible initially, while subsequent middle-click navigation changed the viewpoint."}, {"start_s": 11361.433, "end_s": 11379.233, "action": "Paused on a close view of the corner cabinet and drawers, then made a brief scroll adjustment near the end of the interval.", "intent": "Inspect the cabinet and drawer details closely.", "app": "SketchUp 2024", "details": "The model view stayed largely unchanged for most of the span."}, {"start_s": 11379.233, "end_s": 11388.239, "action": "Clicked and orbited around the lower cabinet and drawer section, then scrolled to settle on a closer view of the open cabinet bay and three drawers.", "intent": "Examine the lower cabinet components from a closer angle.", "app": "SketchUp 2024", "details": "The final view focused on the open shelving bay, drawer stack, countertop, and slatted backsplash."}, {"start_s": 11388.239, "end_s": 11398.92, "action": "Scrolled and adjusted the SketchUp view, then clicked the left toolbar to activate the component placement tool.", "intent": "Prepare to place a hardware component on the cabinet model.", "app": "SketchUp 2024", "details": "Cabinet carcass with an open bay and three drawer fronts remained visible."}, {"start_s": 11398.92, "end_s": 11409.152, "action": "Placed a handle component onto the upper drawer front and orbited the view to inspect its position.", "intent": "Add a drawer handle to the upper drawer.", "app": "SketchUp 2024", "details": "A horizontal handle appeared on the upper drawer front."}, {"start_s": 11409.152, "end_s": 11419.184, "action": "Selected the upper-drawer handle and clicked it repeatedly to begin positioning or moving the component.", "intent": "Adjust the upper drawer handle placement.", "app": "SketchUp 2024", "details": "The handle was highlighted in blue with move controls visible."}, {"start_s": 11419.184, "end_s": 11428.331, "action": "Selected the middle drawer front and used the active move/copy operation, then zoomed in on the drawer hardware.", "intent": "Position another handle on the middle drawer.", "app": "SketchUp 2024", "details": "The middle-drawer handle became selected while the upper handle remained installed."}, {"start_s": 11428.331, "end_s": 11437.553, "action": "Selected the upper handle and copied or moved it toward the middle drawer, using the visible inference line to align the hardware vertically.", "intent": "Duplicate and align the handle on the middle drawer.", "app": "SketchUp 2024", "details": "A copied handle was shown on the middle drawer with a magenta vertical alignment guide."}, {"start_s": 11437.553, "end_s": 11447.754, "action": "Orbited the cabinet view, selected the middle-drawer handle, and continued positioning it beneath the upper handle.", "intent": "Inspect and refine alignment of the drawer handles.", "app": "SketchUp 2024", "details": "The upper and middle handles were visible; the lower-drawer handle remained selected."}, {"start_s": 11447.754, "end_s": 11457.759, "action": "Orbited and zoomed around the SketchUp kitchen model, changing from an interior view to a higher, wider view of the cabinetry and surrounding floor plan.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 11457.759, "end_s": 11469.794, "action": "Continued orbiting and zooming out to review the full L-shaped kitchen assembly, refrigerator-like tower, and nearby plan outlines.", "intent": "Review the overall model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 11469.794, "end_s": 11478.824, "action": "Repeatedly clicked the upper wall cabinet, then right-clicked it and clicked elsewhere; the cabinet became selected and the app transitioned into a drawing/tool state.", "intent": "Select and prepare the upper cabinet area for editing.", "app": "SketchUp 2024", "details": "The selected upper cabinet is outlined in blue."}, {"start_s": 11478.824, "end_s": 11489.297, "action": "Entered 4 and confirmed, then entered L while working on the selected cabinet; clicked its face and activated a drawing operation with a visible endpoint and length readout.", "intent": "Create or modify geometry on the upper cabinet face.", "app": "SketchUp 2024", "details": "The status bar shows a line-drawing operation and a length readout."}, {"start_s": 11489.297, "end_s": 11499.672, "action": "Clicked across the upper cabinet face and drew additional vertical divisions, leaving multiple cabinet panel sections visible while the line tool remained active.", "intent": "Divide the upper cabinet into panel sections.", "app": "SketchUp 2024", "details": "New vertical lines appear across the cabinet front."}, {"start_s": 11499.672, "end_s": 11508.528, "action": "Completed another edit near the cabinet, then orbited and zoomed toward the backsplash and upper cabinets for a close inspection.", "intent": "Inspect the edited cabinet and backsplash geometry.", "app": "SketchUp 2024", "details": "The final view is a close-up of the vertical backsplash slats beneath the divided upper cabinets."}, {"start_s": 11508.528, "end_s": 11522.72, "action": "Scrolled and clicked the upper cabinet assembly, leaving the cabinet faces selected in blue.", "intent": "Inspect or select the upper cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 11522.72, "end_s": 11532.857, "action": "Changed the view around the upper cabinets, selected the left cabinet face, and activated an offset operation on it.", "intent": "Prepare to modify the selected cabinet face.", "app": "SketchUp 2024", "details": "The offset tool prompt is visible and the left face is selected."}, {"start_s": 11532.857, "end_s": 11542.355, "action": "Entered offset values including 18 and MM for the selected cabinet face.", "intent": "Set the cabinet-face offset distance and units.", "app": "SketchUp 2024", "details": "The selected face remains active during numeric entry."}, {"start_s": 11542.355, "end_s": 11552.363, "action": "Confirmed the offset, navigated to a wider cabinet view, and clicked another upper cabinet face while continuing the edit.", "intent": "Apply the cabinet detail and move to another face for editing.", "app": "SketchUp 2024", "details": "The view zooms out to show the full cabinet run and adjacent tall unit."}, {"start_s": 11552.363, "end_s": 11562.723, "action": "Selected the second upper cabinet face, entered 18MM, confirmed it, and scrolled the view.", "intent": "Create the same offset detail on the next cabinet face.", "app": "SketchUp 2024", "details": "The second cabinet face remains selected with the offset outline visible."}, {"start_s": 11562.723, "end_s": 11575.42, "action": "Selected a further upper cabinet face, adjusted the view, and entered 18MM followed by Enter.", "intent": "Apply the repeated offset detail to another cabinet face.", "app": "SketchUp 2024", "details": "The third edited face is selected and shows an inset rectangular outline."}, {"start_s": 11575.42, "end_s": 11585.579, "action": "Selected the rightmost upper cabinet face and activated the offset tool, adjusting the view and selection around the cabinet panel.", "intent": "Prepare the cabinet face for an offset or dimensional edit.", "app": "SketchUp 2024", "details": "The rightmost upper cabinet face became highlighted, with the status bar showing offset measurement mode."}, {"start_s": 11585.579, "end_s": 11595.939, "action": "Continued editing the selected cabinet face and entered an 18MM offset value.", "intent": "Apply a precise 18 mm offset to the cabinet panel.", "app": "SketchUp 2024", "details": "The selected rightmost cabinet face remained highlighted while the measurement field showed an offset value."}, {"start_s": 11595.939, "end_s": 11606.131, "action": "Zoomed and orbited around the kitchen model, moving from the cabinet close-up to a wider elevated view.", "intent": "Inspect the cabinet geometry and surrounding kitchen layout from different angles.", "app": "SketchUp 2024", "details": "The view changed from a close cabinet elevation to a wider perspective showing the countertop, drawers, refrigerator enclosure, and floor plan."}, {"start_s": 11606.131, "end_s": 11615.081, "action": "Orbited and zoomed around the upper cabinet assembly, selected the left cabinet face, and activated the Tape Measure tool with an 18.00 mm guide measurement.", "intent": "Measure and mark the cabinet geometry for further editing.", "app": "SketchUp 2024", "details": "The leftmost upper cabinet face was selected, and the status bar indicated guide creation with length 18.00 mm."}, {"start_s": 11615.081, "end_s": 11626.139, "action": "Entered guide measurements, including 60 and then 60MM, while keeping the cabinet assembly in view.", "intent": "Create a precise 60 mm guide on the cabinet geometry.", "app": "SketchUp 2024", "details": "The measurement field ended at 60MM and a guide line was visible along the cabinet."}, {"start_s": 11626.139, "end_s": 11636.075, "action": "Adjusted the view, selected the leftmost cabinet face, and used Push/Pull to enter a 290.00 mm distance, changing the face geometry.", "intent": "Extrude or recess the selected cabinet face by a specified distance.", "app": "SketchUp 2024", "details": "The Push/Pull tool was active; the selected face and resulting cabinet opening/geometry were visible, with Distance showing 290.00 mm."}, {"start_s": 11636.075, "end_s": 11645.817, "action": "Selected faces and orbited the SketchUp camera around the upper cabinet assembly, changing from a frontal view to an elevated angled view.", "intent": "Inspect the cabinet geometry from different angles.", "app": "SketchUp 2024", "details": "The upper cabinet doors and surrounding kitchen model remained visible; a cabinet face was highlighted near the end."}, {"start_s": 11645.817, "end_s": 11656.218, "action": "Selected a cabinet face, activated Push/Pull, and orbited and zoomed around the upper cabinet, leaving the tool active with a 290.00 mm distance shown.", "intent": "Adjust or inspect the depth of a cabinet face.", "app": "SketchUp 2024", "details": "The cabinet assembly was viewed from above and then from a wider angle."}, {"start_s": 11656.218, "end_s": 11667.051, "action": "Orbited and zoomed toward the upper cabinets, selected cabinet faces, and continued using Push/Pull-related interactions while changing the viewing angle.", "intent": "Refine or inspect the upper cabinet geometry.", "app": "SketchUp 2024", "details": "The view moved from a distant angled perspective to a closer frontal view of four cabinet sections."}, {"start_s": 11667.051, "end_s": 11675.979, "action": "Orbited above the cabinet assembly, selected the top and front faces, and adjusted the view while Push/Pull remained active; the displayed distance reached 290.00 mm.", "intent": "Inspect and potentially modify the cabinet top or face depth.", "app": "SketchUp 2024", "details": "The camera moved from a close overhead view to a wider elevated view."}, {"start_s": 11675.979, "end_s": 11685.123, "action": "Selected the rightmost upper cabinet face, orbited to a low underside angle, and used repeated scroll actions to change the view while Push/Pull remained active.", "intent": "Inspect the rightmost cabinet face and its depth.", "app": "SketchUp 2024", "details": "The rightmost cabinet face was highlighted before the model was viewed from below."}, {"start_s": 11685.123, "end_s": 11696.081, "action": "Selected and inspected the upper cabinet assembly, orbited and zoomed out substantially, and finished on a wider perspective showing the cabinets, counter, drawers, refrigerator block, and floor plan.", "intent": "Review the cabinet placement within the broader kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the complete kitchen corner and surrounding floor-plan lines."}, {"start_s": 11696.081, "end_s": 11705.9, "action": "Orbited and zoomed the SketchUp model, moving from a close view of the cabinetry to an elevated overview; clicked around the upper cabinet area and selected the upper cabinet group, which became outlined in blue.", "intent": "Inspect and select the upper cabinetry in the 3D kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 11705.9, "end_s": 11714.379, "action": "Dragged and orbited the model to review the cabinetry from multiple angles, then continued zooming or panning outward to show the broader kitchen layout and surrounding floor-plan outlines.", "intent": "Review the kitchen cabinet arrangement from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 11714.379, "end_s": 11734.379, "action": "Scrolled to adjust the camera view, leaving the kitchen model in a more distant elevated perspective with the surrounding floor-plan outlines visible.", "intent": "Reframe the 3D model for an overall layout review.", "app": "SketchUp 2024", "details": null}, {"start_s": 11734.379, "end_s": 11745.115, "action": "Scrolled and clicked the component tool on the toolbar, activating component placement; the model remained in the elevated overview and a placement preview appeared near the open floor area.", "intent": "Begin placing a component in the kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 11745.115, "end_s": 11755.227, "action": "Pressed Escape, adjusted the view, and clicked the component tool again; a small table-like component preview was positioned in the open floor area while placement mode remained active.", "intent": "Cancel or reset the prior placement and prepare another component placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 11755.227, "end_s": 11766.14, "action": "Pressed Escape, reactivated component placement, and placed a chair-like component in the open floor area in front of the cabinetry; scrolled slightly while keeping placement mode active.", "intent": "Place seating furniture in the kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 11766.14, "end_s": 11778.667, "action": "Orbit the SketchUp camera around the kitchen model with middle-clicks and repeated scroll inputs, then press Escape; the view shifts to a more front-facing perspective of the cabinets and surrounding floor-plan outlines.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 11778.667, "end_s": 11786.654, "action": "Continue orbiting and zooming the SketchUp scene with middle-clicks and scroll inputs, moving from a close kitchen view to a wider view that includes multiple floor-plan layouts; click near the bottom edge before the span ends.", "intent": "Broaden the model inspection to compare the kitchen with surrounding layouts.", "app": "SketchUp 2024", "details": null}, {"start_s": 11786.654, "end_s": 11793.788, "action": "Switch from SketchUp to the recorder window, which displays the KITCHEN2 task controls and brief; leave the recording window visible until SketchUp is selected again at the end of the span.", "intent": "Check the active recording task status.", "app": "Screen recorder", "details": "The recorder shows the KITCHEN2 run with Finish and Deliver, Pause, and Cancel run controls."}, {"start_s": 11793.788, "end_s": 11798.481, "action": "Return to the SketchUp welcome screen and click the KITCHEN2 recent-file area; the recorder window becomes hidden as SketchUp comes forward.", "intent": "Reopen the KITCHEN2 SketchUp model.", "app": "SketchUp 2024", "details": "The welcome screen shows KITCHEN2 under Recent files."}, {"start_s": 11798.481, "end_s": 11818.481, "action": "Wait while SketchUp loads the selected KITCHEN2 file; the window remains blank white, then updates its title to KITCHEN2 - SketchUp 2024.", "intent": "Allow the selected model to finish loading.", "app": "SketchUp 2024", "details": "No model content is visibly rendered during this interval."}, {"start_s": 11818.481, "end_s": 11822.558, "action": "Remain in the blank KITCHEN2 SketchUp window without visible interaction while a network change is recorded.", "intent": "Wait for SketchUp to respond or finish loading.", "app": "SketchUp 2024", "details": null}, {"start_s": 11822.558, "end_s": 11842.558, "action": "Switched among SketchUp plugin windows, then left the kitchen model visible while minor scrolling and network changes occurred.", "intent": "Maintain the SketchUp kitchen-model workspace.", "app": "SketchUp", "details": "Kitchen cabinetry and floor-plan geometry remained visible."}, {"start_s": 11842.558, "end_s": 11862.558, "action": "Remained idle in SketchUp with the kitchen model unchanged while system notifications and configuration changes appeared.", "intent": "Pause while reviewing the model.", "app": "SketchUp", "details": "A Windows Security firewall notification was visible near the end."}, {"start_s": 11862.558, "end_s": 11872.162, "action": "Scrolled and middle-clicked repeatedly to navigate the 3D view, zooming out and orbiting to a different perspective of the kitchen model.", "intent": "Inspect the kitchen layout from broader and alternate viewpoints.", "app": "SketchUp", "details": "The view changed from a close cabinet view to an elevated perspective showing multiple floor plans."}, {"start_s": 11872.162, "end_s": 11880.89, "action": "Continued middle-click navigation and scrolling, orbiting and zooming toward the upper cabinets and countertop; typed `r` near the end.", "intent": "Inspect the upper cabinetry and counter area.", "app": "SketchUp", "details": "The final view closely framed the upper cabinet compartments, backsplash, counter, drawers, and refrigerator."}, {"start_s": 11880.89, "end_s": 11896.554, "action": "Selected the left upper cabinet area and dragged to create or adjust a rectangular face; clicked again, leaving the model modified and marked unsaved.", "intent": "Edit the left upper cabinet geometry.", "app": "SketchUp", "details": "The title changed to `KITCHEN2*`; the rectangular left cabinet face was active with dimension readouts."}, {"start_s": 11896.554, "end_s": 11906.473, "action": "Clicked the selected cabinet face and opened its context menu, then continued clicking around the face and cabinet edges while keeping the geometry selected.", "intent": "Access editing commands for the selected cabinet face.", "app": "SketchUp", "details": "The context menu showed commands including Erase, Make Group, Reverse Faces, Weld Edges, JointPushPull, and Divide Faces; the selected face remained highlighted."}, {"start_s": 11906.473, "end_s": 11915.385, "action": "Entered a distance of 18mm and confirmed it, then changed the view to show the upper cabinet fronts and open compartments.", "intent": "Adjust a selected cabinet element by a precise distance and inspect the result.", "app": "SketchUp 2024", "details": "The Distance field visibly contained 18mm before the view changed."}, {"start_s": 11915.385, "end_s": 11925.666, "action": "Orbited and zoomed around the kitchen cabinet model, moving from the upper cabinets toward the countertop and drawer area; the window view was also resized during navigation.", "intent": "Inspect different portions of the cabinet assembly in 3D.", "app": "SketchUp 2024", "details": null}, {"start_s": 11925.666, "end_s": 11935.716, "action": "Continued orbiting and zooming out to review the wider kitchen layout, then selected a cabinet component near the upper cabinets.", "intent": "Review the overall model and select a component for further editing.", "app": "SketchUp 2024", "details": "The final state shows a broad view of the L-shaped kitchen, refrigerator, and upper cabinets."}, {"start_s": 11935.716, "end_s": 11944.985, "action": "Selected the lower edge of an upper cabinet and began moving or copying the pre-selected item while zooming in on the cabinet and backsplash junction.", "intent": "Position or duplicate a cabinet element relative to the backsplash.", "app": "SketchUp 2024", "details": "SketchUp displayed the move/copy tool and a distance readout while the element remained highlighted."}, {"start_s": 11944.985, "end_s": 11955.177, "action": "Zoomed further into the selected cabinet edge and clicked it repeatedly, keeping the component selected in move mode.", "intent": "Refine the selection or placement of the cabinet component at close range.", "app": "SketchUp 2024", "details": "The selected geometry remained outlined in blue and the move tool stayed active."}, {"start_s": 11955.177, "end_s": 11965.441, "action": "Orbited and zoomed to the inside corner of the upper cabinet, then clicked to place or confirm the selected component; the move tool remained active with the distance reset to 0.00 mm.", "intent": "Align or finalize the cabinet component at the corner junction.", "app": "SketchUp 2024", "details": "The final close-up shows the selected cabinet side outlined in blue beside the adjacent open cabinet."}, {"start_s": 11965.441, "end_s": 11976.092, "action": "Navigated around the SketchUp kitchen model with repeated scrolls and middle-button orbiting, then clicked and dragged to reposition a selected cabinet-related element.", "intent": "Inspect and adjust the kitchen model view or selected component.", "app": "SketchUp 2024", "details": "The selected geometry remained highlighted while the camera moved around the upper cabinets and slatted backsplash."}, {"start_s": 11976.092, "end_s": 11986.054, "action": "Selected or deselected model geometry, then orbited and zoomed out to reveal the broader kitchen assembly and surrounding floor-plan linework.", "intent": "Review the kitchen model in its larger scene context.", "app": "SketchUp 2024", "details": "The view changed from a close cabinet view to a wide perspective showing the L-shaped kitchen and multiple plan outlines."}, {"start_s": 11986.054, "end_s": 11996.282, "action": "Scrolled and orbited around the model, moving from a distant elevated view to a clearer perspective of the cabinets, drawers, backsplash, and tall unit.", "intent": "Inspect the kitchen layout from different angles.", "app": "SketchUp 2024", "details": "A Windows Explorer window was moved or resized during the span, while SketchUp remained the visible working application."}, {"start_s": 11996.282, "end_s": 12006.411, "action": "Orbited and zoomed toward the upper cabinet run, changing from a full kitchen perspective to a close-up of the cabinet fronts.", "intent": "Examine the upper cabinet geometry and face alignment.", "app": "SketchUp 2024", "details": "The camera ended close to several large white cabinet fronts above the slatted backsplash."}, {"start_s": 12006.411, "end_s": 12016.882, "action": "Used undo keyboard commands, selected cabinet geometry, and orbited the model; the document title changed to KITCHEN2 without the modified marker.", "intent": "Revise or inspect recent cabinet geometry changes.", "app": "SketchUp 2024", "details": "The view showed open-front cabinet compartments, with one cabinet area selected before the camera moved."}, {"start_s": 12016.882, "end_s": 12027.243, "action": "Selected a cabinet interior face, switched to the Push/Pull tool, and entered a 9 mm distance followed by Enter to modify the face.", "intent": "Apply a precise 9 mm geometric adjustment to the selected cabinet face.", "app": "SketchUp 2024", "details": "The selected interior side face was highlighted with the Push/Pull tool active, and the title indicated unsaved changes."}, {"start_s": 12027.243, "end_s": 12037.898, "action": "Navigated around the SketchUp model with scrolling and orbiting, selected a narrow interior face, and entered 9 mm to adjust it before orbiting to a wider view of the four compartments.", "intent": "Adjust the thickness or position of an interior partition.", "app": "SketchUp 2024", "details": "A narrow partition face was visibly selected and the distance field showed 12.29 mm during the operation."}, {"start_s": 12037.898, "end_s": 12048.908, "action": "Zoomed and orbited around the four-compartment model, selected an interior back face, and inspected the resulting view while entering a numeric value.", "intent": "Prepare another compartment face for dimensional editing.", "app": "SketchUp 2024", "details": "The selected face appeared stippled in the second compartment; the final typed value was 9."}, {"start_s": 12048.908, "end_s": 12059.298, "action": "Resized the Explorer window area, selected a narrow partition face, entered 9 mm, and orbited to inspect the model from a nearby angle.", "intent": "Set or refine the dimension of an interior partition.", "app": "SketchUp 2024", "details": "The distance field showed 6.37 mm after the operation."}, {"start_s": 12059.298, "end_s": 12069.116, "action": "Orbited and zoomed closer to the compartments, activated Push/Pull, selected an interior partition face, and entered a 9.00 mm distance before cancelling or leaving the tool.", "intent": "Modify the thickness of a selected partition surface.", "app": "SketchUp 2024", "details": "The Push/Pull status was visible and the distance field showed 9.00 mm."}, {"start_s": 12069.116, "end_s": 12079.612, "action": "Navigated to another partition, selected its face, entered 9 mm, and left the face selected while adjusting the view.", "intent": "Set the thickness of another interior partition.", "app": "SketchUp 2024", "details": "The distance field showed 14.95 mm at the end of the span."}, {"start_s": 12079.612, "end_s": 12088.945, "action": "Orbited and zoomed around the model, selected a partition face, and continued positioning the camera and activating the modeling tool for further editing.", "intent": "Inspect and prepare another partition for adjustment.", "app": "SketchUp 2024", "details": "The final view showed the four compartments with a narrow partition face selected and the distance field at 0.00 mm."}, {"start_s": 12088.945, "end_s": 12098.505, "action": "Entered 9 mm, orbited and zoomed around the row of open cabinet compartments, then clicked to adjust the view and selection.", "intent": "Inspect and position the cabinet model for further editing.", "app": "SketchUp 2024", "details": "The Distance field showed 9.00 mm and later 0.00 mm."}, {"start_s": 12098.505, "end_s": 12108.41, "action": "Entered 9 mm again, orbited and zoomed across the cabinet compartments, and clicked the model to reposition the viewpoint.", "intent": "Continue inspecting the cabinet geometry from another angle.", "app": "SketchUp 2024", "details": "The view changed from an angled close-up to a more frontal view of four compartments."}, {"start_s": 12108.41, "end_s": 12119.081, "action": "Selected cabinet edges and faces, orbited and zoomed in, and dragged across the lower edge area while changing the view.", "intent": "Select or inspect specific cabinet geometry.", "app": "SketchUp 2024", "details": "A Windows Explorer window was briefly resized or moved during the interaction."}, {"start_s": 12119.081, "end_s": 12129.691, "action": "Scrolled and clicked around the lower cabinet edges, then continued navigating the model view until several vertical edges were highlighted blue.", "intent": "Inspect and select cabinet edges.", "app": "SketchUp 2024", "details": "The camera remained focused on the lower fronts and dividers of the compartments."}, {"start_s": 12129.691, "end_s": 12139.658, "action": "Scrolled and orbited away from the close-up, dragged across cabinet geometry, and zoomed out to reveal the cabinet within the larger floor plan.", "intent": "Review the cabinet placement in the broader model.", "app": "SketchUp 2024", "details": "The final view showed the cabinet, adjacent large block, and other floor-plan outlines."}, {"start_s": 12139.658, "end_s": 12148.931, "action": "Resized or moved a Windows Explorer window, typed a character, then scrolled and dragged from the upper-left cabinet corner while zooming in.", "intent": "Prepare and begin editing the cabinet's upper-left geometry.", "app": "SketchUp 2024", "details": "The Line tool prompt appeared at the end, with the cursor positioned near the upper-left corner and a Dimensions field visible."}, {"start_s": 12148.931, "end_s": 12159.153, "action": "Selected the left cabinet panel and scrolled and adjusted the SketchUp view, bringing the cabinet assembly closer into view.", "intent": "Inspect and position the cabinet model for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 12159.153, "end_s": 12171.256, "action": "Scrolled while viewing the cabinet assembly, leaving the selected left panel prominent in the SketchUp viewport.", "intent": "Continue inspecting the cabinet geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 12171.256, "end_s": 12180.484, "action": "Opened the selected panel\u2019s context menu, dismissed it, and clicked the panel repeatedly until the face was selected for a push/pull-style edit.", "intent": "Prepare the cabinet panel for modification.", "app": "SketchUp 2024", "details": "The context menu showed modeling options including Erase, Hide, Make Group, and JointPushPull."}, {"start_s": 12180.484, "end_s": 12190.716, "action": "Entered 18mm and confirmed it, then orbited and adjusted the view around the cabinet assembly.", "intent": "Apply an 18 mm dimensional edit to the selected panel and inspect the result.", "app": "SketchUp 2024", "details": "The selected panel remained visible while the camera moved to an elevated side view."}, {"start_s": 12190.716, "end_s": 12202.02, "action": "Selected a cabinet element, typed a command character, scrolled and repositioned the view, then initiated a move operation on the selected geometry.", "intent": "Position the cabinet element for further modeling.", "app": "SketchUp 2024", "details": "The Move tool status was visible and the selected geometry was outlined in blue."}, {"start_s": 12202.02, "end_s": 12212.232, "action": "Scrolled and adjusted the close-up view, then clicked the selected cabinet geometry to continue the active move operation; the distance indicator reached approximately 500.12 mm.", "intent": "Move the selected cabinet geometry to a new position.", "app": "SketchUp 2024", "details": "The close-up showed the selected vertical panel and adjacent slatted wall while the Move tool remained active."}, {"start_s": 12212.232, "end_s": 12222.276, "action": "Scrolled and adjusted the SketchUp camera around the selected wall and railing geometry, then clicked and middle-dragged to reposition the view while the Move tool remained active.", "intent": "Inspect and position the architectural model from a closer angle.", "app": "SketchUp 2024", "details": "Selected geometry remained outlined in blue; the status bar showed the Move tool and a distance readout."}, {"start_s": 12222.276, "end_s": 12232.372, "action": "Scrolled and clicked around the railing and wall opening, then middle-dragged to orbit and reposition the selected panel in the model view.", "intent": "Refine the viewpoint and placement of the selected architectural element.", "app": "SketchUp 2024", "details": "The view changed from a close-up to a wider view of the wall openings and railing; the selected panel stayed highlighted."}, {"start_s": 12232.372, "end_s": 12243.155, "action": "Scrolled and clicked the selected wall panel, entered an undo keystroke, then moved the window and resized a Windows Explorer window before clicking the model again.", "intent": "Correct or review the recent model edit while managing the surrounding desktop window layout.", "app": "SketchUp 2024", "details": "The panel remained outlined in blue and an \u201cOn Edge in Group\u201d tooltip appeared; a Windows Explorer window-move/resize event was recorded."}, {"start_s": 12243.155, "end_s": 12253.798, "action": "Scrolled and middle-dragged to orbit around the selected panel, clicked and dragged its lower edge, and continued scrolling while the orbit/move interaction remained active.", "intent": "Inspect and adjust the selected panel geometry from different angles.", "app": "SketchUp 2024", "details": "The camera moved to close views of the panel edge and railing; the status bar indicated orbiting and later moving pre-selected items."}, {"start_s": 12253.798, "end_s": 12259.67, "action": "Clicked the model and middle-dragged to orbit outward, changing from a close-up of the panel to a wider exterior view of the building and surrounding floor-plan linework.", "intent": "Review the overall model context after the close-up adjustment.", "app": "SketchUp 2024", "details": "The final view showed four wall panels, the railing below, an adjacent block, and additional plan outlines on the ground plane."}, {"start_s": 12259.67, "end_s": 12270.35, "action": "Paused briefly, then scrolled to slightly reposition the camera while keeping the exterior building view visible.", "intent": "Make a small final viewpoint adjustment for model inspection.", "app": "SketchUp 2024", "details": "The view remained on the four-panel wall, railing, adjacent block, and floor-plan outlines; no new geometry edit was evident."}, {"start_s": 12270.35, "end_s": 12277.167, "action": "Orbited the SketchUp kitchen model, changing from a close view of the upper cabinets to a wider elevated view.", "intent": "Inspect the cabinet assembly from different angles.", "app": "SketchUp", "details": null}, {"start_s": 12277.167, "end_s": 12290.956, "action": "Continued orbiting and zooming around the kitchen model, revealing the upper cabinets, tall cabinet, lower drawers, and floor-plan outlines.", "intent": "Review the overall kitchen layout and cabinet components.", "app": "SketchUp", "details": null}, {"start_s": 12290.956, "end_s": 12299.097, "action": "Selected the leftmost upper cabinet panel and adjusted the view around the cabinet row; then opened the joint configuration tool.", "intent": "Prepare the cabinet component for joint configuration.", "app": "SketchUp", "details": "The leftmost cabinet panel remained highlighted, and the Joint configuration control was opened."}, {"start_s": 12299.097, "end_s": 12309.002, "action": "Displayed the Joint configuration dialog, opened the joint type menu, and changed the joint type from slider to hinge while navigating the model view.", "intent": "Configure the selected cabinet panel as a hinged joint.", "app": "SketchUp", "details": "The dialog showed hinge selected, with Open and Close controls and a 1-second animation time."}, {"start_s": 12309.002, "end_s": 12318.966, "action": "Navigated and zoomed the model while keeping the Joint configuration dialog open, then interacted with the selected cabinet edge for joint-axis setup.", "intent": "Position the model and continue defining the hinge joint.", "app": "SketchUp", "details": "The hinge dialog remained visible with the Joint axis Select control available; the cabinet geometry became highlighted in red."}, {"start_s": 12318.966, "end_s": 12331.412, "action": "Closed or hid the configuration dialog, manipulated the cabinet panel, and displayed the leftmost upper cabinet door swung open before orbiting to a wider view.", "intent": "Test or demonstrate the configured cabinet hinge movement.", "app": "SketchUp", "details": "The leftmost upper cabinet door was visibly open in the final model view."}, {"start_s": 12331.412, "end_s": 12339.452, "action": "Orbited the SketchUp kitchen model to reveal the upper cabinets and adjacent tall unit from a different angle.", "intent": "Inspect the cabinet layout and geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 12339.452, "end_s": 12351.454, "action": "Scrolled to zoom out, keeping the kitchen cabinet assembly visible while exposing more of the surrounding model.", "intent": "Review the overall cabinet arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 12351.454, "end_s": 12359.308, "action": "Clicked the upper cabinet area and adjusted the view; selected the left cabinet door, which became outlined in blue.", "intent": "Select and inspect an upper cabinet component.", "app": "SketchUp 2024", "details": null}, {"start_s": 12359.308, "end_s": 12369.172, "action": "Exited the selection state, clicked and navigated around the model, then scrolled to a higher top-down view of the kitchen cabinets and counter.", "intent": "Reposition the camera to inspect the cabinet assembly from above.", "app": "SketchUp 2024", "details": null}, {"start_s": 12369.172, "end_s": 12379.566, "action": "Scrolled repeatedly and orbited around the model, moving from the wider kitchen view into a close-up of the four upper cabinet fronts and backsplash.", "intent": "Examine the upper cabinet fronts and surrounding surfaces.", "app": "SketchUp 2024", "details": null}, {"start_s": 12379.566, "end_s": 12389.335, "action": "Orbited and scrolled around the close-up cabinet geometry, shifting the view across the cabinet fronts and backsplash without making visible model edits.", "intent": "Inspect the cabinet alignment and geometry from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 12389.335, "end_s": 12399.292, "action": "Selected an edge or face, entered a short text input, and navigated the SketchUp view with scrolling and middle-mouse orbiting; left the model focused on a highlighted panel edge.", "intent": "Adjust the view and work on a model edge or face.", "app": "SketchUp 2024", "details": "Move tool status and a distance readout remained visible."}, {"start_s": 12399.292, "end_s": 12408.964, "action": "Orbiting and scrolling repositioned the camera around the selected panel area, then clicked the panel edge and entered a short text input; activated a face-editing operation with a distance readout.", "intent": "Inspect and modify a selected face or edge in the 3D model.", "app": "SketchUp 2024", "details": "The status bar changed from moving a pre-selected item to pushing or pulling a selected face; distance reached 5.63 mm."}, {"start_s": 12408.964, "end_s": 12420.637, "action": "Scrolled extensively while continuing the active face-editing operation, moving the view from the panel corner to a close-up of an upper edge; no completed placement or confirmation was visible.", "intent": "Navigate the model while adjusting the active face operation.", "app": "SketchUp 2024", "details": "Push/Pull status remained active with distance values increasing to about 27 mm."}, {"start_s": 12420.637, "end_s": 12428.932, "action": "Clicked and dragged on the model, scrolled to orbit and zoom out, then selected a large rectangular panel face and clicked elsewhere; changed from a close-up corner view to an oblique view of multiple panels.", "intent": "Inspect and select a panel face in the 3D model.", "app": "SketchUp 2024", "details": "A rectangular face was selected and the Push/Pull tool showed a 9.00 mm distance before the view changed."}, {"start_s": 12428.932, "end_s": 12439.395, "action": "Orbiting and scrolling pulled the camera back and around the cabinet-like model, revealing a row of four rectangular panels above vertical slats; ended on a wider exterior view.", "intent": "Review the overall arrangement of the modeled panels and surrounding structure.", "app": "SketchUp 2024", "details": "No clear geometry change was confirmed; navigation dominated the span."}, {"start_s": 12439.395, "end_s": 12449.372, "action": "Scrolled and orbited toward a panel junction, then clicked and dragged repeatedly near a lower panel edge and entered a short text input; left the view in a close-up with a face-editing tool and distance readout active.", "intent": "Inspect and adjust geometry at a panel edge or junction.", "app": "SketchUp 2024", "details": "The final view showed a highlighted narrow face/edge and a 6.11 mm distance readout."}, {"start_s": 12449.372, "end_s": 12459.219, "action": "Navigated around the SketchUp kitchen model with repeated middle-button orbiting and scrolling, briefly pressed Space, and changed from a close-up cabinet view to a wider perspective.", "intent": "Inspect the 3D kitchen layout from different angles.", "app": "SketchUp", "details": null}, {"start_s": 12459.219, "end_s": 12470.47, "action": "Orbited and zoomed out around the model, changing from the cabinet close-up to broader views of the L-shaped lower cabinets, drawers, upper cabinets, backsplash, and tall unit.", "intent": "Review the overall kitchen cabinet arrangement.", "app": "SketchUp", "details": "System configuration and network-related changes were recorded during the span."}, {"start_s": 12470.47, "end_s": 12479.858, "action": "Orbited and zoomed toward the upper cabinets and backsplash, ending on a nearly front-facing view of the four upper cabinet doors.", "intent": "Examine the upper cabinet and backsplash geometry.", "app": "SketchUp", "details": null}, {"start_s": 12479.858, "end_s": 12487.005, "action": "Paused briefly on the upper cabinet view, then orbited and zoomed to an elevated angled perspective showing the upper cabinets, backsplash, countertop, and tall unit.", "intent": "Inspect the cabinet assembly from another angle.", "app": "SketchUp", "details": null}, {"start_s": 12487.005, "end_s": 12495.693, "action": "Zoomed out and orbited around the kitchen model, moving from a close elevated view to a wider perspective that included the upper and lower cabinets, tall unit, and surrounding floor-plan outlines.", "intent": "Review the kitchen model in its broader scene context.", "app": "SketchUp", "details": null}, {"start_s": 12495.693, "end_s": 12505.603, "action": "Orbited and zoomed through closer and wider views of the lower cabinets, drawers, countertop, backsplash, and tall unit, ending on a distant elevated view of the complete kitchen layout and nearby plan outlines.", "intent": "Survey the completed kitchen layout from multiple viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 12505.603, "end_s": 12515.571, "action": "Navigated and zoomed around the SketchUp kitchen cabinetry, then selected the component-placement tool and brought the view closer to the upper cabinets.", "intent": "Inspect and position a cabinet-related component in the model.", "app": "SketchUp 2024", "details": "The kitchen island, upper cabinets, drawers, backsplash, and tall cabinet remained visible while the camera moved closer."}, {"start_s": 12515.571, "end_s": 12526.749, "action": "Selected a small component on an upper cabinet, activated rotation, and entered 90 degrees to rotate it upright.", "intent": "Orient the selected cabinet hardware or component vertically.", "app": "SketchUp 2024", "details": "The selected component was shown with the rotation protractor and then appeared vertical with Angle 90.0."}, {"start_s": 12526.749, "end_s": 12536.699, "action": "Adjusted the camera around the upper cabinets and backsplash, then orbited the model to review the component placement from a wider angle.", "intent": "Review the rotated component and its placement on the cabinet face.", "app": "SketchUp 2024", "details": "The upper cabinet row and tall cabinet were reframed, and orbit mode was active near the end."}, {"start_s": 12536.699, "end_s": 12549.243, "action": "Orbited and zoomed down along the kitchen island, inspecting the countertop, slatted backsplash, cabinet side, and drawer fronts from close angles.", "intent": "Inspect the cabinet assembly and surrounding geometry.", "app": "SketchUp 2024", "details": "The view moved from the upper cabinet area to a close-up of the island and backsplash."}, {"start_s": 12549.243, "end_s": 12558.341, "action": "Reframed the kitchen toward the upper cabinet row, zoomed in, and selected the small vertical component on the left cabinet door.", "intent": "Select the placed component for further adjustment.", "app": "SketchUp 2024", "details": "The component was highlighted in blue on the leftmost upper cabinet door."}, {"start_s": 12558.341, "end_s": 12569.717, "action": "Selected and began moving the cabinet component, then zoomed and orbited to inspect its position while keeping it attached to the upper cabinet face.", "intent": "Adjust or verify the component's placement on the cabinet door.", "app": "SketchUp 2024", "details": "The Move tool was active with a distance readout, and the selected component remained highlighted on the left cabinet door."}, {"start_s": 12569.717, "end_s": 12576.941, "action": "Scrolled repeatedly while keeping the selected vertical cabinet handle in view; the SketchUp model view shifted slightly.", "intent": "Adjust the model view around the selected handle.", "app": "SketchUp 2024", "details": null}, {"start_s": 12576.941, "end_s": 12586.771, "action": "Clicked the selected vertical handle and scrolled, zooming the cabinet view closer while leaving the handle selected.", "intent": "Inspect or prepare the handle for modification.", "app": "SketchUp 2024", "details": "The Move tool remained active."}, {"start_s": 12586.771, "end_s": 12596.211, "action": "Scrolled once, then clicked the selected handle and dragged it along the green axis; a second handle appeared to the left as the copy moved.", "intent": "Copy and position a matching cabinet handle.", "app": "SketchUp 2024", "details": "The status bar indicated a copy operation, with the distance increasing from about 88.78 mm to 103.77 mm."}, {"start_s": 12596.211, "end_s": 12606.685, "action": "Confirmed the copied handle placement and scrolled repeatedly to zoom out, revealing multiple cabinet doors and the newly positioned handle.", "intent": "Place the copied handle and review its location in the cabinet layout.", "app": "SketchUp 2024", "details": "The Move tool remained active and the copied handle stayed selected."}, {"start_s": 12606.685, "end_s": 12616.403, "action": "Clicked another cabinet door area twice and then clicked again on the handle region, selecting a handle or related geometry for the next operation.", "intent": "Select the next cabinet handle or component to modify.", "app": "SketchUp 2024", "details": "The view remained focused on the upper cabinet doors."}, {"start_s": 12616.403, "end_s": 12626.683, "action": "Orbited the model with middle-clicks, dragged a selected handle along the green axis, and scrolled to adjust the view; the handle remained selected near the cabinet-door seam.", "intent": "Reposition or inspect another cabinet handle from a different view.", "app": "SketchUp 2024", "details": "The view changed to a more frontal angle, showing several handles across the cabinet doors."}, {"start_s": 12626.683, "end_s": 12639.237, "action": "Orbited and zoomed in on the modeled L-shaped kitchen, then zoomed back out slightly to adjust the view.", "intent": "Inspect the kitchen cabinet and appliance layout from different angles.", "app": "SketchUp 2024", "details": "Displayed cabinetry, countertop, backsplash, tall cabinet, and surrounding floor-plan outlines."}, {"start_s": 12639.237, "end_s": 12646.324, "action": "Zoomed out and orbited around the kitchen model, ending on a wider oblique view.", "intent": "Review the overall kitchen model and its placement among the surrounding plans.", "app": "SketchUp 2024", "details": "The view shifted from a close kitchen view to a wider perspective showing multiple plan outlines."}, {"start_s": 12646.324, "end_s": 12666.324, "action": "Paused with the kitchen model displayed in a stable oblique view.", "intent": "Review the current 3D model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 12666.324, "end_s": 12686.324, "action": "Zoomed out to reveal more of the surrounding floor-plan layouts while keeping the kitchen model visible.", "intent": "Inspect the kitchen model in relation to the broader drawing layout.", "app": "SketchUp 2024", "details": "The model became smaller and additional plan outlines appeared on the right."}, {"start_s": 12686.324, "end_s": 12698.108, "action": "Zoomed farther out, revealing the standing figure and a larger portion of the surrounding SketchUp workspace.", "intent": "Review the model at a broader scene scale.", "app": "SketchUp 2024", "details": "The kitchen model remained visible near the left while multiple plan drawings and a scale figure were shown."}, {"start_s": 12698.108, "end_s": 12709.772, "action": "Orbited across the scene and zoomed or panned to inspect several kitchen and floor-plan layouts from above.", "intent": "Compare the modeled kitchen with adjacent plan layouts.", "app": "SketchUp 2024", "details": "The view transitioned to an elevated overview showing multiple plan arrangements and the kitchen model."}, {"start_s": 12709.772, "end_s": 12720.507, "action": "Typed a character, clicked the upper-right edge of the kitchen plan, and adjusted a rectangular selection or drawing region along the right side.", "intent": "Refine geometry on the kitchen plan.", "app": "SketchUp 2024", "details": "The selected region and dimension readout changed between clicks."}, {"start_s": 12720.507, "end_s": 12729.835, "action": "Clicked the model, zoomed in with scroll input, then clicked the upper-right perimeter and selected the long top/right boundary strip.", "intent": "Inspect and select the perimeter geometry more closely.", "app": "SketchUp 2024", "details": "The view moved to a close-up of the kitchen plan and the perimeter strip became stippled when selected."}, {"start_s": 12729.835, "end_s": 12739.372, "action": "Right-clicked the selected perimeter to open the context menu, dismissed it, and left the surrounding boundary geometry selected.", "intent": "Access context actions for the selected geometry and continue editing.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, and Zoom Selection."}, {"start_s": 12739.372, "end_s": 12749.669, "action": "Scrolled out substantially to reveal multiple floor-plan views while keeping the central kitchen-plan perimeter selected.", "intent": "Review the selected geometry in the broader model layout.", "app": "SketchUp 2024", "details": "The central plan remained outlined in blue as the camera zoomed out."}, {"start_s": 12749.669, "end_s": 12759.517, "action": "Scrolled to adjust the view around the central plan, then typed a character and switched to the Push/Pull tool.", "intent": "Prepare to modify a selected face or perimeter element.", "app": "SketchUp 2024", "details": "The Push/Pull tool became active and the status bar prompted selection of a face."}, {"start_s": 12759.517, "end_s": 12771.005, "action": "Selected a face or edge, adjusted the view with clicks and scrolling, activated an offset operation, and typed 1000 as the offset value.", "intent": "Create an offset from the selected kitchen-plan geometry.", "app": "SketchUp 2024", "details": "The offset preview highlighted the upper and right perimeter in magenta; the visible offset readout was approximately 711.32 mm after entering 1000."}, {"start_s": 12771.005, "end_s": 12779.964, "action": "Entered millimeter values and confirmed them, then middle-clicked and scrolled to adjust the SketchUp view; entered 5000 as the offset value.", "intent": "Modify selected kitchen geometry with the Joint Push Pull offset tool.", "app": "SketchUp 2024", "details": "Joint Push Pull controls showed an offset field ending at 5000."}, {"start_s": 12779.964, "end_s": 12790.253, "action": "Confirmed the prior value, entered 3000 millimeters, and then entered another millimeter value while the raised wall geometry updated.", "intent": "Continue adjusting the selected face geometry with numeric offsets.", "app": "SketchUp 2024", "details": "The visible offset field showed 5000 mm and later 3000 mm."}, {"start_s": 12790.253, "end_s": 12803.961, "action": "Confirmed the offset, navigated around the model with middle-clicks, entered 25000 millimeters, and confirmed another millimeter entry; the selected wall face was raised and remained in the Joint Push Pull operation.", "intent": "Create or adjust a large vertical wall extrusion in the kitchen model.", "app": "SketchUp 2024", "details": "The Joint Push Pull offset field visibly showed 3000 mm; the raised face was selected."}, {"start_s": 12803.961, "end_s": 12814.06, "action": "Encountered a Ruby Error reporting an undefined curve method during Joint Push Pull geometry generation, switched back to the SketchUp model, and edited the offset entry by deleting and typing 2500 before further deletion.", "intent": "Recover from a failed geometry-generation operation and revise the numeric offset.", "app": "SketchUp 2024", "details": "The error dialog identified Joint Push Pull and the message \u201cundefined method `curve' for nil:NilClass\u201d."}, {"start_s": 12814.06, "end_s": 12823.002, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom out from the kitchen layouts, then changed the camera to a distant overhead perspective and finally to a low oblique view of the model.", "intent": "Inspect the kitchen model from different viewpoints after the geometry error.", "app": "SketchUp 2024", "details": "The model transitioned from multiple floor-plan layouts to a distant view and then a low perspective."}, {"start_s": 12823.002, "end_s": 12832.786, "action": "Continued orbiting and zooming with middle-clicks, moving from the distant layout view into a close view of the cabinets and tall side panel, then below the kitchen geometry.", "intent": "Examine the kitchen cabinet assembly and surrounding geometry from multiple angles.", "app": "SketchUp 2024", "details": "Final view showed the cabinet assembly from underneath against the blue sky background."}, {"start_s": 12832.786, "end_s": 12843.274, "action": "Navigated around the SketchUp model with middle-button clicks and scrolling, then selected the outlined floor-plan group.", "intent": "Inspect and select a floor-plan element in the 3D model.", "app": "SketchUp 2024", "details": "The selected plan appeared outlined in blue."}, {"start_s": 12843.274, "end_s": 12853.171, "action": "Clicked the selected geometry, entered push/pull editing, and raised faces to form walls around the floor plan.", "intent": "Extrude the selected floor-plan geometry into 3D walls.", "app": "SketchUp 2024", "details": "A partial wall enclosure became visible around the plan."}, {"start_s": 12853.171, "end_s": 12863.18, "action": "Selected the wall enclosure, typed a tool shortcut, and navigated with extensive scrolling while positioning the model.", "intent": "Adjust or reposition the modeled enclosure for further editing.", "app": "SketchUp 2024", "details": "The view moved close to the selected enclosure and showed an active move/inference operation."}, {"start_s": 12863.18, "end_s": 12874.186, "action": "Scrolled and navigated around the model, zooming from the overall layout into the kitchen enclosure and its cabinetry.", "intent": "Review the resulting kitchen model from multiple viewpoints.", "app": "SketchUp 2024", "details": "The final view showed the kitchen walls, cabinets, countertop, and backsplash in close-up."}, {"start_s": 12874.186, "end_s": 12894.186, "action": "Paused on the kitchen model with only minor scrolling, leaving the enclosure and cabinetry visible in perspective.", "intent": "Review the modeled kitchen arrangement.", "app": "SketchUp 2024", "details": "No substantive geometry change was visible during the interval."}, {"start_s": 12894.186, "end_s": 12905.452, "action": "Orbited the SketchUp camera with middle-button drags and slight scrolling, changing from a wider view to a higher angled view of the kitchen enclosure.", "intent": "Inspect the completed kitchen model from another perspective.", "app": "SketchUp 2024", "details": "The final view clearly showed the L-shaped base cabinets, upper cabinets, tall unit, walls, and backsplash."}, {"start_s": 12905.452, "end_s": 12915.338, "action": "Navigated around the SketchUp model with orbiting, scrolling, and repeated clicks, then selected the kitchen enclosure and briefly entered a tool or text command.", "intent": "Inspect and select geometry in the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 12915.338, "end_s": 12924.426, "action": "Zoomed and orbited from a close view of the upper cabinets and wall back to a wider view of the kitchen model and surrounding floor-plan outlines.", "intent": "Review the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 12924.426, "end_s": 12935.332, "action": "Orbited and zoomed toward the kitchen enclosure, clicked repeatedly on the upper wall edge, and left the outer wall geometry selected.", "intent": "Inspect or select the upper wall geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 12935.332, "end_s": 12945.02, "action": "Selected the upper wall face, entered a distance of 6 inches, and confirmed it, then orbited and zoomed to a lower interior view of the kitchen.", "intent": "Adjust the selected wall geometry by a specified distance.", "app": "SketchUp 2024", "details": "The SketchUp measurement box visibly shows 6 inches."}, {"start_s": 12945.02, "end_s": 12952.954, "action": "Orbited and zoomed around the kitchen corner, then repeatedly clicked the upper wall or trim area until the surrounding geometry became selected.", "intent": "Inspect and select the upper perimeter geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 12952.954, "end_s": 12963.628, "action": "Continued clicking the selected upper wall area, entered a tool command, and entered and confirmed a 6-inch distance while the view remained focused on the kitchen wall and trim.", "intent": "Apply another measured adjustment to the selected wall geometry.", "app": "SketchUp 2024", "details": "The final SketchUp distance field visibly shows 152.40 mm."}, {"start_s": 12963.628, "end_s": 12972.769, "action": "Orbited and zoomed the SketchUp camera around the kitchen cabinet model, moving from a wider view to a close-up of the upper cabinets and backsplash.", "intent": "Inspect the kitchen cabinet arrangement from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 12972.769, "end_s": 12982.963, "action": "Zoomed out from the kitchen corner to reveal more of the surrounding model and floor-plan outlines.", "intent": "Review the kitchen model in its broader layout context.", "app": "SketchUp 2024", "details": null}, {"start_s": 12982.963, "end_s": 12993.323, "action": "Orbited and zoomed around the kitchen model, then entered several undo keystrokes while the model remained visible.", "intent": "Adjust the camera view and possibly reverse recent modeling actions.", "app": "SketchUp 2024", "details": "The recorded keystrokes are undo commands, but the specific changes being reversed are not visible."}, {"start_s": 12993.323, "end_s": 13001.668, "action": "Clicked and orbited around the kitchen cabinetry while repeatedly zooming, ending on a wider elevated view of the L-shaped cabinets, backsplash, and tall unit.", "intent": "Inspect the kitchen design from multiple elevated angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 13001.668, "end_s": 13021.668, "action": "Remained idle while viewing the kitchen cabinet model in SketchUp.", "intent": "Pause to review the displayed model.", "app": "SketchUp 2024", "details": null}, {"start_s": 13021.668, "end_s": 13029.577, "action": "Zoomed the view slightly and clicked the Oven toolbar control, leaving the kitchen model displayed.", "intent": "Select or activate the oven component tool.", "app": "SketchUp 2024", "details": "The final status bar identifies the selected toolbar item as Oven."}, {"start_s": 13029.577, "end_s": 13040.1, "action": "Scrolled repeatedly through the SketchUp kitchen model, moving from a wide cabinet view to a close-up of the oven and lower cabinets.", "intent": "Inspect the kitchen cabinet and appliance layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 13040.1, "end_s": 13050.148, "action": "Pressed Escape, scrolled and adjusted the view across the lower cabinets, then clicked in the model and returned to the kitchen corner view.", "intent": "Review the lower cabinet arrangement from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 13050.148, "end_s": 13060.21, "action": "Clicked and dragged in the model at several points, briefly displaying a small selected component near the left base before clearing the selection and returning to the cabinet view.", "intent": "Select or inspect kitchen model components.", "app": "SketchUp 2024", "details": null}, {"start_s": 13060.21, "end_s": 13068.288, "action": "Scrolled extensively, zooming away from the cabinet fronts to a close view of a small countertop or furniture component and its supports, then clicked the model.", "intent": "Inspect another modeled component in the kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 13068.288, "end_s": 13078.72, "action": "Scrolled and navigated upward across the kitchen corner, bringing a small bench-like component on the countertop into view, then clicked it and left a selected rectangular outline on the wall area.", "intent": "Review and select a component near the countertop and backsplash.", "app": "SketchUp 2024", "details": null}, {"start_s": 13078.72, "end_s": 13088.4, "action": "Scrolled out from the close kitchen view to a wide scene showing the kitchen model and multiple surrounding floor-plan layouts, then clicked and dragged near the kitchen model.", "intent": "Review the kitchen in the context of the broader floor-plan scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 13088.4, "end_s": 13098.929, "action": "Exited the active tool, clicked the toolbar, and scrolled/zoomed from the wider kitchen layout into a close view of the base cabinets and drawers.", "intent": "Navigate and inspect the kitchen cabinet model.", "app": "SketchUp", "details": null}, {"start_s": 13098.929, "end_s": 13109.095, "action": "Scrolled and adjusted the view around the lower cabinets, briefly showing a black storage box on the floor, then clicked the toolbar and removed or hid that object from view.", "intent": "Inspect and modify the kitchen scene around the lower cabinetry.", "app": "SketchUp", "details": null}, {"start_s": 13109.095, "end_s": 13119.368, "action": "Scrolled to reposition the camera around the cabinet doors and drawers, then activated the automatic cleaning control.", "intent": "Adjust the model view and start automatic cleaning.", "app": "SketchUp", "details": "The automatic cleaning control is visible as activated at the end of the span."}, {"start_s": 13119.368, "end_s": 13123.764, "action": "Kept SketchUp active and clicked the automatic cleaning control, which opened a warning dialog stating that automatic cleaning can slow down Click-Kitchen 2 and should be used only for small projects.", "intent": "Confirm or invoke automatic cleaning for the model.", "app": "SketchUp", "details": "Warning dialog remained open with OK and close controls."}, {"start_s": 13123.764, "end_s": 13134.276, "action": "Dismissed the warning dialog, then clicked and scrolled around the cabinet area while toggling the automatic cleaning control; returned to the SketchUp model view.", "intent": "Proceed with or adjust the cleaning mode while inspecting the cabinets.", "app": "SketchUp", "details": "The model remained in a close cabinet view; no distinct geometry change was visible."}, {"start_s": 13134.276, "end_s": 13141.866, "action": "Clicked the cleaning controls and switched from automatic to manual cleaning, with SketchUp alternating between related windows before ending in the manual-cleaning state.", "intent": "Change the model-cleaning mode to manual.", "app": "SketchUp", "details": "The status bar showed \u201cManual cleaning\u201d at the evidence timestamp."}, {"start_s": 13141.866, "end_s": 13148.376, "action": "Switched to SketchUp and orbited and zoomed out from a close cabinet view to inspect the overall kitchen model and surrounding floor-plan geometry.", "intent": "Review the kitchen layout from a broader perspective.", "app": "SketchUp", "details": "The KITCHEN2 model was active; middle-button navigation changed the camera view."}, {"start_s": 13148.376, "end_s": 13156.523, "action": "Paused on the kitchen model, then zoomed in toward the base cabinets, countertop, backsplash, upper cabinets, and tall side unit.", "intent": "Inspect the cabinet arrangement more closely.", "app": "SketchUp", "details": "Camera navigation enlarged the U-shaped kitchen view."}, {"start_s": 13156.523, "end_s": 13166.391, "action": "Clicked the backsplash assembly, leaving its geometry highlighted in blue.", "intent": "Select the backsplash component for inspection or editing.", "app": "SketchUp", "details": "The selected object spans the long rear backsplash and the right-side return."}, {"start_s": 13166.391, "end_s": 13176.122, "action": "Orbited and zoomed out around the selected backsplash, then opened its context menu with a right-click.", "intent": "Examine the selected backsplash in context and access object commands.", "app": "SketchUp", "details": "The context menu showed commands including Entity Info, Erase, Hide, Lock, Edit Group, and Explode."}, {"start_s": 13176.122, "end_s": 13188.145, "action": "Dismissed the context menu and continued orbiting and zooming around the kitchen, changing to a higher overhead view while the backsplash was no longer visibly highlighted.", "intent": "Review the kitchen model from another angle.", "app": "SketchUp", "details": "The camera moved from a front perspective to an elevated overview."}, {"start_s": 13188.145, "end_s": 13199.399, "action": "Continued zooming and orbiting outward to frame the entire kitchen unit and nearby floor-plan outlines.", "intent": "Inspect the overall placement of the kitchen within the larger plan.", "app": "SketchUp", "details": "The final view showed the kitchen smaller within the surrounding model space."}, {"start_s": 13199.399, "end_s": 13209.436, "action": "Scrolled and orbited the SketchUp model, then adjusted the camera to inspect the kitchen cabinetry and adjacent floor-plan lines from a slightly different angle.", "intent": "Inspect the modeled kitchen layout from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 13209.436, "end_s": 13229.436, "action": "Orbited and zoomed the model to bring the lower cabinets, drawers, countertop, and tall right-side unit into a closer frontal view.", "intent": "Examine the kitchen cabinet arrangement more closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 13229.436, "end_s": 13243.016, "action": "Orbited the model to reveal more of the right-side drawers and upper cabinets while keeping the countertop and lower cabinetry visible.", "intent": "Review the cabinet configuration from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 13243.016, "end_s": 13253.632, "action": "Orbited and zoomed the model, reframing the kitchen run and tall side unit; hovered over the toolbar area where the status text identified a Microwave tool.", "intent": "Inspect the kitchen model and briefly review an available modeling tool.", "app": "SketchUp 2024", "details": null}, {"start_s": 13253.632, "end_s": 13273.632, "action": "Scrolled and orbited to a wider, more centered view of the kitchen cabinetry, including the three drawers, double-door base cabinet, corner drawers, upper cabinets, and tall unit.", "intent": "Review the overall cabinet layout in the 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 13273.632, "end_s": 13280.082, "action": "Scrolled and orbited the model to zoom out and reposition the camera, showing the full kitchen arrangement and nearby floor-plan geometry.", "intent": "Set a broader inspection view of the modeled space.", "app": "SketchUp 2024", "details": null}, {"start_s": 13280.082, "end_s": 13297.088, "action": "Displayed the SketchUp kitchen model and clicked the window-frame tool on the toolbar.", "intent": "Activate the window-frame creation tool.", "app": "SketchUp 2024", "details": "The kitchen cabinetry model remained visible; the toolbar status indicated window-frame creation."}, {"start_s": 13297.088, "end_s": 13307.263, "action": "Opened the 1001bit.com Create Window Frame dialog, then closed or hid it and clicked the kitchen wall area in SketchUp.", "intent": "Configure or initiate a window-frame operation on a selected face.", "app": "SketchUp 2024", "details": "The dialog showed rectangular frame settings and a Create Window Frame button; SketchUp later indicated that a face or window profile should be selected."}, {"start_s": 13307.263, "end_s": 13323.671, "action": "Navigated the SketchUp view by orbiting around the kitchen model, then opened the Extensions menu and highlighted MajWindow.", "intent": "Adjust the model view and access the MajWindow extension.", "app": "SketchUp 2024", "details": "The view shifted to a more frontal perspective before the Extensions menu was opened."}, {"start_s": 13323.671, "end_s": 13338.033, "action": "Selected the wall area and clicked along the upper wall region, producing a highlighted rectangular window outline with colored axes.", "intent": "Define or place a window opening on the kitchen wall.", "app": "SketchUp 2024", "details": "The status bar referred to selecting a wall and then a window's first edge."}, {"start_s": 13338.033, "end_s": 13350.178, "action": "Continued selecting and manipulating the wall/window geometry, changed the view, and opened Extensions menus including the MajWindow submenu.", "intent": "Continue the window-placement workflow and access window tools.", "app": "SketchUp 2024", "details": "The model became semi-transparent during selection; the MajWindow submenu was visible near the end."}, {"start_s": 13350.178, "end_s": 13358.089, "action": "Displayed the MAJ Window Ver:2025 Window Information dialog and clicked Draw Window, leaving the dialog open.", "intent": "Configure and begin drawing a window.", "app": "SketchUp 2024", "details": "The dialog showed Window Type Type A, Window Height 600 mm, and Floor Gap 915 mm."}, {"start_s": 13358.089, "end_s": 13368.064, "action": "Completed the wall-opening operation, creating a small rectangular blue-highlighted opening in the kitchen wall above the base cabinets.", "intent": "Create a rectangular wall opening.", "app": "SketchUp 2024", "details": "The model view changed from a red rectangle preview to a framed blue opening."}, {"start_s": 13368.064, "end_s": 13377.098, "action": "Orbited and zoomed the kitchen model to review the newly created wall opening from wider and elevated angles.", "intent": "Inspect the wall opening and surrounding cabinet layout.", "app": "SketchUp 2024", "details": "The opening remained visible above the lower cabinets while the camera perspective changed."}, {"start_s": 13377.098, "end_s": 13388.249, "action": "Continued navigating the model with orbit/zoom gestures, then switched back to the Select tool.", "intent": "Adjust the viewport and prepare for the next modeling operation.", "app": "SketchUp 2024", "details": "The final view showed the kitchen from an elevated angle with the wall opening no longer visibly filled."}, {"start_s": 13388.249, "end_s": 13397.281, "action": "Orbited and zoomed around the kitchen, clicked in the model, and entered the Rectangle tool shortcut.", "intent": "Reposition the view and begin drawing another rectangle.", "app": "SketchUp 2024", "details": "The view shifted between elevated and closer perspectives; the model geometry remained unchanged."}, {"start_s": 13397.281, "end_s": 13413.511, "action": "Activated the Rectangle tool and positioned the cursor on the back wall to set the first corner of a new rectangle.", "intent": "Start drawing a new rectangular element on the wall.", "app": "SketchUp 2024", "details": "The wall was stipple-highlighted and the status bar indicated the first corner/second corner rectangle workflow."}, {"start_s": 13413.511, "end_s": 13431.261, "action": "Set rectangle corners on the back wall, producing a large rectangular face, then activated the wall-opening tool and selected the rectangle area.", "intent": "Create a larger wall opening or profile on the back wall.", "app": "SketchUp 2024", "details": "A large rectangle appeared on the wall; the final status bar stated that openings could be created on vertical walls."}, {"start_s": 13431.261, "end_s": 13436.21, "action": "Opened the 1001bit.com Create Opening dialog over the SketchUp kitchen model, then clicked in the model and returned to the main SketchUp window.", "intent": "Begin creating a wall opening in the kitchen model.", "app": "SketchUp", "details": "Dialog showed 400.00 mm width, 600.00 mm height, and a single leaf door opening preset."}, {"start_s": 13436.21, "end_s": 13446.913, "action": "Selected points on the wall to define the opening\u2019s horizontal and vertical distances; left SketchUp prompting for the next vertical-distance point.", "intent": "Position and size the wall opening.", "app": "SketchUp", "details": "A rectangular opening preview appeared on the wall."}, {"start_s": 13446.913, "end_s": 13462.169, "action": "Selected additional points to complete the opening placement, producing a rectangular opening outline in the wall, then activated the Create Opening tool again.", "intent": "Create the wall opening at the specified location.", "app": "SketchUp", "details": "The model showed a rectangular outlined opening; the tool status still prompted for a vertical distance."}, {"start_s": 13462.169, "end_s": 13467.71, "action": "Reopened the 1001bit.com Create Opening dialog and clicked its close control.", "intent": "Close the opening-creation dialog and continue working in the model.", "app": "SketchUp", "details": "Dialog retained 400.00 mm width, 600.00 mm height, and the single leaf door opening preset."}, {"start_s": 13467.71, "end_s": 13477.688, "action": "Navigated the SketchUp camera by scrolling and orbiting around the kitchen model, changing from a close wall view to a higher overhead view.", "intent": "Inspect the wall opening and surrounding kitchen layout.", "app": "SketchUp", "details": "The rectangular opening remained visible while the viewpoint shifted."}, {"start_s": 13477.688, "end_s": 13486.128, "action": "Clicked in the model and used undo-related key presses, then orbited and zoomed to settle on a wider view of the kitchen wall and cabinets.", "intent": "Review or adjust the recent opening geometry and inspect the result.", "app": "SketchUp", "details": "Final view showed the rectangular wall opening above the countertop."}, {"start_s": 13486.128, "end_s": 13496.432, "action": "Clicked and dragged repeatedly on the wall-mounted rectangular panel, leaving it highlighted with a blue outline.", "intent": "Select the wall-mounted rectangular element for further editing.", "app": "SketchUp 2024", "details": "The kitchen model remained visible in perspective."}, {"start_s": 13496.432, "end_s": 13506.681, "action": "Adjusted the camera around the selected wall panel using orbit/scroll interactions, then clicked near the panel and activated a modeling tool; the view shifted to a higher angled perspective.", "intent": "Inspect the selected panel and surrounding kitchen geometry from another angle.", "app": "SketchUp 2024", "details": "The panel remained selected while the kitchen layout became more top-down."}, {"start_s": 13506.681, "end_s": 13516.816, "action": "Orbited and zoomed around the kitchen model, then used the Push/Pull tool on the wall face; the view pulled back to show the kitchen structure and nearby floor-plan outlines.", "intent": "Modify or inspect the wall geometry around the selected opening or panel.", "app": "SketchUp 2024", "details": "The Push/Pull tool was active and a distance of 228.00 mm was visible during the operation."}, {"start_s": 13516.816, "end_s": 13527.17, "action": "Continued orbiting and zooming around the kitchen, moving from an overhead view to a closer interior perspective of the cabinets, counter, wall panel, and tall cabinet.", "intent": "Review the modeled kitchen arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": "Window resize and movement events occurred without a visible change to the SketchUp model."}, {"start_s": 13527.17, "end_s": 13532.21, "action": "Orbited the camera around the kitchen assembly, briefly viewing the tall cabinet from the front and then returning to an elevated view of the counters and wall panel.", "intent": "Inspect the model from alternate exterior and elevated angles.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible; interactions primarily changed the camera view."}, {"start_s": 13532.21, "end_s": 13545.824, "action": "Paused on the kitchen model, then scrolled and orbited to zoom out and reveal more of the surrounding floor-plan drawings.", "intent": "Review the completed kitchen layout in context with the surrounding plan.", "app": "SketchUp 2024", "details": "The final view showed the kitchen assembly smaller within the broader SketchUp workspace."}, {"start_s": 13545.824, "end_s": 13555.383, "action": "Navigated around the SketchUp kitchen model with middle-mouse clicks and scrolls, moving from an overhead view to a closer view of the wall cabinetry and rectangular wall opening.", "intent": "Inspect the kitchen model and wall opening from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 13555.383, "end_s": 13568.655, "action": "Activated a drawing tool, clicked around the rectangular wall opening, and entered a space; then clicked the opening and toolbar controls, leaving the rectangular face selected for panel division.", "intent": "Prepare the wall opening face for panel subdivision.", "app": "SketchUp 2024", "details": "The selected rectangular face is shown with a dotted highlight, and the status bar indicates panel division."}, {"start_s": 13568.655, "end_s": 13583.833, "action": "Switched to the 1001bit.com Panel divider dialog, edited the number-of-rows field to 2 while retaining 3 columns, and then clicked back toward the model.", "intent": "Configure a two-row, three-column panel division.", "app": "SketchUp 2024", "details": "The Panel divider dialog shows rectangular frame selected, 2 rows, 3 columns, and back panel location."}, {"start_s": 13583.833, "end_s": 13599.254, "action": "Returned to the model and selected the rectangular wall face, then reopened the Panel divider dialog; the face became highlighted for division.", "intent": "Continue applying the panel-divider operation to the wall face.", "app": "SketchUp 2024", "details": "The model shows the rectangular face selected while the Panel divider window is brought back to the foreground."}, {"start_s": 13599.254, "end_s": 13611.031, "action": "Opened the Panel divider dialog over the model, changed the number of rows from 2 to 1 and then to 2 while keeping 3 columns, and clicked Create Panel.", "intent": "Set the desired panel layout and create the divided panel.", "app": "SketchUp 2024", "details": "The dialog visibly shows 1 row at the sampled point, with 3 columns and Create Panel available."}, {"start_s": 13611.031, "end_s": 13620.967, "action": "Returned to the SketchUp model and navigated with middle-mouse orbiting and scrolling; the wall opening resolved into two blue inset panels, then the view orbited outward to inspect the window from the exterior.", "intent": "Inspect the created panel/window geometry from interior and exterior views.", "app": "SketchUp 2024", "details": "The final view shows a framed two-panel window opening in the kitchen wall."}, {"start_s": 13620.967, "end_s": 13630.215, "action": "Orbit and zoom around the modeled kitchen, moving from a close cabinet-and-window view to an elevated overview of the room layout.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 13630.215, "end_s": 13640.184, "action": "Orbit and adjust the view, then select and manipulate the backsplash area; the model shows a slatted backsplash panel appearing behind the countertop before the application becomes hidden.", "intent": "Modify or inspect the kitchen backsplash component.", "app": "SketchUp 2024", "details": "The final clicks hide the SketchUp window."}, {"start_s": 13640.184, "end_s": 13651.146, "action": "Orbit around the kitchen to inspect the newly visible slatted backsplash and cabinetry, zooming toward the upper cabinets and window; enter the letter \"p\" near the end.", "intent": "Review the backsplash and cabinet arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 13651.146, "end_s": 13659.471, "action": "Select the window assembly and orbit around it, changing to a higher angle that shows the window frame, slatted backsplash, countertops, and wall cabinets.", "intent": "Inspect the window component within the kitchen model.", "app": "SketchUp 2024", "details": "The selected window assembly remains highlighted during the view changes."}, {"start_s": 13659.471, "end_s": 13667.469, "action": "Resize or manipulate the selected window assembly, changing it from an enlarged solid box-like form to a visible framed double-window view while scrolling to adjust the viewpoint.", "intent": "Adjust the selected window geometry or inspect its dimensions.", "app": "SketchUp 2024", "details": "System display and network state changes occurred during the span."}, {"start_s": 13667.469, "end_s": 13677.253, "action": "Scroll and orbit around the selected window component, moving from a close-up of its top to a distant elevated view of the detached component and surrounding kitchen layout.", "intent": "Review the window component and its placement relative to the kitchen.", "app": "SketchUp 2024", "details": null}, {"start_s": 13677.253, "end_s": 13697.253, "action": "Remained idle in SketchUp while viewing the kitchen cabinet model; the visible view and tool state stayed unchanged.", "intent": "Review the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 13697.253, "end_s": 13709.886, "action": "Adjusted the 3D view with a middle-button navigation gesture and clicked within the model, leaving the cabinet assembly visible from a slightly changed angle.", "intent": "Navigate the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 13709.886, "end_s": 13719.884, "action": "Navigated around the kitchen model with middle-button clicks and scroll gestures, changing from an angled cabinet view to a wider view of the wall cabinets and island.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 13719.884, "end_s": 13730.429, "action": "Orbited and zoomed the SketchUp camera toward the back wall, bringing the framed window, vertical slat backsplash, countertop, and cabinets into a more frontal view.", "intent": "Examine the back-wall kitchen features.", "app": "SketchUp 2024", "details": null}, {"start_s": 13730.429, "end_s": 13741.005, "action": "Continued orbiting and zooming around the framed window and backsplash, briefly selecting or clicking in the model while moving to a closer, upward-facing view.", "intent": "Inspect the window and backsplash geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 13741.005, "end_s": 13751.116, "action": "Zoomed and orbited further into the window and backsplash area until the view became a close-up of the window frame, slatted wall, and countertop edge.", "intent": "Review details of the window and surrounding wall geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 13751.116, "end_s": 13761.268, "action": "Scrolled and repeatedly clicked around the left opening area, then selected the rectangular frame surrounding the two openings.", "intent": "Select the window-frame geometry for editing.", "app": "SketchUp 2024", "details": "The frame became outlined in blue."}, {"start_s": 13761.268, "end_s": 13771.684, "action": "Adjusted the view and clicked within the left opening, then activated Push/Pull and positioned it over a vertical face.", "intent": "Prepare a face in the left opening for extrusion editing.", "app": "SketchUp 2024", "details": "Push/Pull mode was active and the distance field showed 30.59 mm."}, {"start_s": 13771.684, "end_s": 13779.836, "action": "Entered short keyboard inputs, dragged with Push/Pull on the selected narrow face, and repositioned the view around the opening.", "intent": "Modify the selected face depth or height with Push/Pull.", "app": "SketchUp 2024", "details": "The Push/Pull distance reached 0.00 mm and the view shifted closer to the frame."}, {"start_s": 13779.836, "end_s": 13789.035, "action": "Clicked and dragged the lower-left area of the frame with Push/Pull, extending the selected face substantially.", "intent": "Extrude the selected frame face to change its geometry.", "app": "SketchUp 2024", "details": "The displayed Push/Pull distance increased to 109.89 mm and then 363.96 mm."}, {"start_s": 13789.035, "end_s": 13799.164, "action": "Scrolled and orbited around the model, clicked near the left opening, and selected geometry while changing the camera to show both openings.", "intent": "Inspect and reposition the model for further editing.", "app": "SketchUp 2024", "details": "The view changed from a close-up to a wider angled view of the two framed openings."}, {"start_s": 13799.164, "end_s": 13809.372, "action": "Adjusted the view with middle-clicks and scrolling, then activated Push/Pull and dragged the narrow face at the left side of the opening.", "intent": "Continue modifying the left-side face of the frame.", "app": "SketchUp 2024", "details": "Push/Pull remained active; the final displayed distance was 58.59 mm."}, {"start_s": 13809.372, "end_s": 13819.555, "action": "Dragged and clicked around the left opening, then orbited and zoomed the SketchUp view to inspect the row of vertical slats and selected a narrow face for Push/Pull.", "intent": "Inspect and prepare a narrow slat face for geometric editing.", "app": "SketchUp", "details": "The Push/Pull tool remained active and the selected narrow face was visible near the left side of the framed opening."}, {"start_s": 13819.555, "end_s": 13830.132, "action": "Orbited and zoomed out from the close-up, clicked around the framed slats, and left the model in a wider view showing the complete double opening and surrounding railing.", "intent": "Reposition the camera to review the framed railing assembly.", "app": "SketchUp", "details": "The final view showed the full framed double opening with vertical slats extending along both sides."}, {"start_s": 13830.132, "end_s": 13837.917, "action": "Scrolled and orbited around the framed opening, clicked a narrow face, and zoomed into the upper edge of the vertical slats for closer inspection.", "intent": "Inspect the slat geometry and select a face for possible editing.", "app": "SketchUp", "details": "The view ended on a close-up of the slat tops and an adjacent narrow selected face."}, {"start_s": 13837.917, "end_s": 13847.435, "action": "Scrolled through several zoom levels and orbited around the opening, then clicked near the upper-left slat area while inspecting the framed railing geometry.", "intent": "Navigate and examine the upper portions of the slatted opening.", "app": "SketchUp", "details": "The camera moved between wider and closer views; no clearly visible completed geometry change was established."}, {"start_s": 13847.435, "end_s": 13857.228, "action": "Clicked sequentially across the top faces of the vertical slats from left to right, selecting multiple adjacent faces along the opening.", "intent": "Select a series of slat-top faces for a repeated modeling operation.", "app": "SketchUp", "details": "By the end, a long run of adjacent top faces was highlighted."}, {"start_s": 13857.228, "end_s": 13867.364, "action": "Clicked and briefly dragged at the right end of the selected run, typed a character, then dragged from the left side across the opening with Push/Pull active to modify the selected slat geometry.", "intent": "Apply a repeated face-editing operation to the slatted railing.", "app": "SketchUp", "details": "The final close-up showed the left side of the opening with the Push/Pull cursor and a distance readout of 71.74 mm."}, {"start_s": 13867.364, "end_s": 13877.029, "action": "Dragged and scrolled around the slatted SketchUp model, then used Push/Pull on a selected small face; reduced the displayed distance to about 9.07 mm and created a short protruding block.", "intent": "Modify the geometry of a selected face in the slatted model.", "app": "SketchUp 2024", "details": "Push/Pull tool remained active."}, {"start_s": 13877.029, "end_s": 13887.805, "action": "Dragged to orbit and inspect the model, then clicked and middle-clicked near the lower edge of the framed slatted section; left the view showing the frame and repeated slats from an angled perspective.", "intent": "Inspect and reposition the 3D view around the edited slatted structure.", "app": "SketchUp 2024", "details": "The model remained visible with repeated vertical slats and framed openings."}, {"start_s": 13887.805, "end_s": 13898.008, "action": "Orbited and zoomed into the lower-left area of a framed opening, selected a small face near the base, and repeatedly clicked or dragged while working with the Push/Pull tool; typed a space and later a 'p' during the interaction.", "intent": "Adjust or inspect a small face and nearby slats in the framed opening.", "app": "SketchUp 2024", "details": "The view ended in a close-up of the base and adjacent vertical slats."}, {"start_s": 13898.008, "end_s": 13908.228, "action": "Dragged across the model and used middle-clicks and scrolling to reposition the view; selected a face in the framed opening and adjusted it with Push/Pull, with the distance field showing about 55.68 mm.", "intent": "Modify and inspect the selected face within the slatted frame.", "app": "SketchUp 2024", "details": "The selected face and surrounding slats remained visible as the camera angle changed."}, {"start_s": 13908.228, "end_s": 13917.677, "action": "Scrolled and orbited around the framed slats, clicked a narrow vertical element, briefly dragged it, and typed a space and 'p'; ended with the model shown from a wider angled view.", "intent": "Inspect and refine the narrow elements around the framed opening.", "app": "SketchUp 2024", "details": "A small red selection marker appeared during the interaction."}, {"start_s": 13917.677, "end_s": 13927.709, "action": "Dragged to orbit and zoom out around the framed slatted structure, clicked near the lower frame and middle-clicked to continue navigation, then scrolled through several views.", "intent": "Review the overall arrangement of the edited slatted panels and frame.", "app": "SketchUp 2024", "details": "The final view showed multiple framed openings and repeated vertical slats from an oblique angle."}, {"start_s": 13927.709, "end_s": 13938.315, "action": "Navigated and adjusted the SketchUp kitchen model with scrolling, middle-button view changes, clicks, and drags; typed a character and began manipulating a narrow cabinet face before switching to SketchUp.", "intent": "Modify or inspect a narrow cabinet element in the kitchen model.", "app": "SketchUp", "details": "The view shows repeated vertical cabinet fronts, with a push/pull-style offset readout near the selected area."}, {"start_s": 13938.315, "end_s": 13948.476, "action": "Reoriented the SketchUp view around the cabinet fronts using middle-button navigation and scrolling, then clicked a narrow vertical face and typed a character.", "intent": "Inspect and position the model for editing a narrow cabinet face.", "app": "SketchUp", "details": "The cabinet fronts remained in close view; the narrow face was highlighted during navigation."}, {"start_s": 13948.476, "end_s": 13958.213, "action": "Typed a character, selected a narrow cabinet face, and dragged with the active push/pull-style tool to change its geometry; repositioned the view with middle-button navigation and scrolling.", "intent": "Adjust the depth or position of a narrow cabinet component.", "app": "SketchUp", "details": "The selected narrow face and tool distance readouts indicate an in-progress geometric adjustment."}, {"start_s": 13958.213, "end_s": 13968.408, "action": "Continued dragging the selected cabinet face with the push/pull-style tool, then clicked and navigated with middle-button movements and scrolling to inspect the resulting geometry.", "intent": "Continue shaping and reviewing the cabinet element.", "app": "SketchUp", "details": "The view shifted to a large horizontal cabinet panel and surrounding vertical fronts while the tool remained active."}, {"start_s": 13968.408, "end_s": 13978.496, "action": "Navigated and zoomed around the cabinet fronts with middle-button movement and scrolling, then clicked and dragged across the narrow vertical elements.", "intent": "Inspect and select narrow cabinet components for further editing.", "app": "SketchUp", "details": "The close-up view shows several narrow vertical strips between larger cabinet fronts."}, {"start_s": 13978.496, "end_s": 13988.466, "action": "Completed the drag, clicked narrow vertical elements, and scrolled and navigated to a wider view; selected several narrow strips, which appeared highlighted in blue, before continuing to inspect the upper cabinet area.", "intent": "Select and review multiple narrow cabinet elements in the model.", "app": "SketchUp", "details": "Several adjacent narrow vertical lines were visibly selected in blue in the wider cabinet view."}, {"start_s": 13988.466, "end_s": 13998.097, "action": "Dragged to orbit the SketchUp camera, clicked in the model, and continued navigating with middle-clicks and scrolls to inspect the kitchen cabinetry and slatted wall panels from different angles.", "intent": "Inspect the 3D kitchen model and adjust the viewing angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 13998.097, "end_s": 14010.536, "action": "Navigated the SketchUp view with middle-click and scroll inputs, ending on a wider view of the kitchen corner, cabinetry, window frame, and slatted wall panels.", "intent": "Zoom out and review the overall kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 14010.536, "end_s": 14020.629, "action": "Orbiting and scrolling through the model, selected geometry near the lower wall area, and entered the letter \u201cp\u201d while inspecting the slatted panels and window surround.", "intent": "Inspect and begin manipulating a model element near the wall base.", "app": "SketchUp 2024", "details": "The view changed repeatedly between close and angled perspectives."}, {"start_s": 14020.629, "end_s": 14030.306, "action": "Dragged to orbit and zoomed toward the lower edge of the window surround, then selected a small face beneath it and used the Push/Pull tool to pull the face outward, leaving a small blue-gray protruding block.", "intent": "Modify the selected lower wall or panel geometry.", "app": "SketchUp 2024", "details": "The Push/Pull distance field visibly changed from 700.00 mm to 36.81 mm."}, {"start_s": 14030.306, "end_s": 14040.112, "action": "Selected and adjusted the small protruding geometry beneath the window while navigating with middle-clicks and scrolls; the view remained focused on the lower wall edge and adjacent slats.", "intent": "Refine the newly created protruding model element.", "app": "SketchUp 2024", "details": null}, {"start_s": 14040.112, "end_s": 14050.104, "action": "Scrolled and navigated around the lower wall, pressed undo twice, and continued inspecting the small protruding geometry from close angles.", "intent": "Review or revert recent geometry edits.", "app": "SketchUp 2024", "details": "The final view showed the lower wall edge with the small rectangular element still visible."}, {"start_s": 14050.104, "end_s": 14060.48, "action": "Adjusted the SketchUp camera around the repeated vertical-panel wall using clicks, drags, and scrolling, then switched to orbit navigation and changed the view to show the larger wall section.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2024", "details": "Viewed repeated vertical panels and framed openings from progressively wider angles."}, {"start_s": 14060.48, "end_s": 14070.153, "action": "Orbited and zoomed around the wall, selected a face with the Push/Pull tool, and dragged the face to modify its depth; the view ended focused on the framed openings and vertical panels.", "intent": "Edit the depth of a selected wall or panel face.", "app": "SketchUp 2024", "details": "Push/Pull distance reached approximately 501.39 mm."}, {"start_s": 14070.153, "end_s": 14079.938, "action": "Orbited and zoomed closer to the lower portions of the framed openings, selected a face, and dragged with Push/Pull to adjust the geometry before repositioning the camera.", "intent": "Continue shaping the wall and panel geometry.", "app": "SketchUp 2024", "details": "The model view moved from a close-up of the openings to the lower wall edge and repeated panels."}, {"start_s": 14079.938, "end_s": 14089.984, "action": "Dragged a selected face with Push/Pull, then orbited and zoomed around the wall and lower panel row; clicked and adjusted the view while inspecting the resulting geometry.", "intent": "Refine and inspect the edited wall faces.", "app": "SketchUp 2024", "details": "The view shifted across the framed opening and lower repeated blocks."}, {"start_s": 14089.984, "end_s": 14099.128, "action": "Selected a lower rectangular panel, used Push/Pull to modify it, and continued clicking and orbiting around the lower wall area to inspect the result.", "intent": "Modify a lower panel element and review its placement.", "app": "SketchUp 2024", "details": "The selected panel was visibly highlighted, then shown as a shallow edited feature with a distance of about 6.22 mm."}, {"start_s": 14099.128, "end_s": 14109.969, "action": "Scrolled and orbited away from the close-up, briefly adjusted a lower wall face, and zoomed out to review the overall kitchen wall, framed openings, repeated vertical panels, and cabinetry.", "intent": "Review the completed wall edits in the broader model context.", "app": "SketchUp 2024", "details": "Ended with a wide overview of the kitchen corner and edited wall treatment."}, {"start_s": 14109.969, "end_s": 14120.21, "action": "Selected a face on the vertical-bar model, typed a character, dragged with the Push/Pull tool, and scrolled the view.", "intent": "Modify a selected model face and inspect the result.", "app": "SketchUp 2024", "details": "A close-up of the framed vertical-bar structure remained visible."}, {"start_s": 14120.21, "end_s": 14129.792, "action": "Dragged the selected face with Push/Pull and navigated the view, revealing the larger framed structure and then returning to a close-up.", "intent": "Extend or adjust geometry on the framed structure.", "app": "SketchUp 2024", "details": "The model showed a rectangular frame with two openings and repeated vertical bars."}, {"start_s": 14129.792, "end_s": 14139.802, "action": "Scrolled and middle-dragged to navigate around the model, clicked faces, and typed a character while inspecting the framed openings and vertical bars.", "intent": "Review and reposition the 3D view around the edited geometry.", "app": "SketchUp 2024", "details": "The view shifted across the lower portions of the two framed openings."}, {"start_s": 14139.802, "end_s": 14151.642, "action": "Clicked faces repeatedly, scrolled, and dragged with Push/Pull to adjust geometry around the framed openings; finished with another click and scroll.", "intent": "Modify and inspect faces in the frame and bar assembly.", "app": "SketchUp 2024", "details": "The frame was shown from a wider perspective, with the left and right openings filled by vertical bars."}, {"start_s": 14151.642, "end_s": 14163.576, "action": "Navigated with middle-clicks and scrolling, then selected and dragged a lower face with Push/Pull, changing the small protruding block beneath the frame.", "intent": "Adjust the lower model geometry.", "app": "SketchUp 2024", "details": "The camera moved to a close-up of the lower edge and a small block between vertical elements."}, {"start_s": 14163.576, "end_s": 14174.944, "action": "Pressed Escape and space, selected and dragged the small lower face with Push/Pull, then clicked again to continue adjusting it.", "intent": "Refine the small lower protruding feature.", "app": "SketchUp 2024", "details": "The small block was visibly extended and then appeared flattened or recessed relative to the surrounding vertical bars."}, {"start_s": 14174.944, "end_s": 14186.56, "action": "Orbited and zoomed around the kitchen model, moving from a close view of the window and vertical backsplash slats to a wider centered view.", "intent": "Inspect the modeled kitchen wall and backsplash from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 14186.56, "end_s": 14197.992, "action": "Orbited and zoomed out around the kitchen, revealing the L-shaped counters, upper cabinets, window, and slatted backsplash before moving to an exterior side view of the wall.", "intent": "Review the overall kitchen layout and wall construction.", "app": "SketchUp 2024", "details": null}, {"start_s": 14197.992, "end_s": 14207.763, "action": "Continued orbiting and zooming around the kitchen model, alternating between wide corner views and closer views of the window, cabinets, counters, and backsplash.", "intent": "Examine the modeled kitchen from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 14207.763, "end_s": 14217.872, "action": "Selected a face or object near the slatted backsplash, typed a command shortcut, and navigated into a very close view while using the modeling tool.", "intent": "Edit or inspect a component of the backsplash geometry.", "app": "SketchUp 2024", "details": "The view became highly zoomed in and the status bar indicated a face-based modeling tool."}, {"start_s": 14217.872, "end_s": 14228.467, "action": "Zoomed and orbited around the close-up backsplash geometry, selected a face between the vertical slats, and activated a face-editing operation.", "intent": "Modify or inspect an individual backsplash face.", "app": "SketchUp 2024", "details": "The selected face was shown with a dotted highlight and the status bar indicated Push/Pull."}, {"start_s": 14228.467, "end_s": 14238.322, "action": "Dragged across the selected backsplash face and continued orbiting and zooming, leaving a highlighted face visible between the slats.", "intent": "Adjust or inspect the depth of a backsplash panel face.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active while the camera moved to another close angle."}, {"start_s": 14238.322, "end_s": 14247.835, "action": "Clicked and scrolled through the SketchUp model, orbiting around the framed openings and repeated vertical panels; selected a face and typed \"p\" to activate Push/Pull.", "intent": "Inspect the model and prepare a face for editing.", "app": "SketchUp 2024", "details": "The view changed to an angled perspective of the openings and panel geometry."}, {"start_s": 14247.835, "end_s": 14256.946, "action": "Pressed Escape, then typed Space while the Push/Pull tool remained active; left the visible geometry unchanged.", "intent": "Cancel or adjust the active modeling tool.", "app": "SketchUp 2024", "details": "The selected top face remained visible without an evident geometry change."}, {"start_s": 14256.946, "end_s": 14266.952, "action": "Clicked successive top faces across the left group of vertical panels, building a multi-face selection.", "intent": "Select multiple corresponding faces for a grouped modeling operation.", "app": "SketchUp 2024", "details": "Several top faces became stippled/selected in blue."}, {"start_s": 14266.952, "end_s": 14277.777, "action": "Continued clicking top faces in the left panel group, extending and adjusting the multi-face selection.", "intent": "Complete the set of faces to edit.", "app": "SketchUp 2024", "details": "The selected top-face pattern remained highlighted across the panel row."}, {"start_s": 14277.777, "end_s": 14288.945, "action": "Clicked additional panel faces, scrolled slightly, then clicked the compact Push-Pull tool control.", "intent": "Apply or prepare a compact Push-Pull operation to the selected geometry.", "app": "SketchUp 2024", "details": "The status bar identified Compact Push-pull on average direction."}, {"start_s": 14288.945, "end_s": 14298.331, "action": "Dragged with the active extrusion/offset tool and clicked faces while navigating the model; scrolled and left the tool active with changing offset values.", "intent": "Adjust the offset of the selected face geometry.", "app": "SketchUp 2024", "details": "SketchUp displayed Face Selection and Offset controls with values around -545.64 mm and -138.52 mm; no finalized offset was evident."}, {"start_s": 14298.331, "end_s": 14307.939, "action": "Clicked and scrolled repeatedly, orbiting the SketchUp camera around the modeled kitchen wall, window, and vertical slatted panels.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 14307.939, "end_s": 14317.97, "action": "Clicked within the model and scrolled to adjust the camera, moving from a close view of the window and slatted panel to a slightly wider elevated view.", "intent": "Continue inspecting the window and surrounding wall details.", "app": "SketchUp 2024", "details": null}, {"start_s": 14317.97, "end_s": 14327.04, "action": "Scrolled and orbited outward to reveal the broader kitchen corner, including the window, backsplash slats, countertop, and upper cabinets.", "intent": "Review the overall placement of the modeled kitchen elements.", "app": "SketchUp 2024", "details": null}, {"start_s": 14327.04, "end_s": 14334.45, "action": "Scrolled and orbited the camera toward a more frontal view, centering the window and backsplash above the countertop and lower cabinets.", "intent": "Refine the inspection viewpoint for the kitchen wall assembly.", "app": "SketchUp 2024", "details": null}, {"start_s": 14334.45, "end_s": 14344.572, "action": "Paused briefly, then scrolled to zoom out and show more of the countertop, lower cabinetry, window, backsplash, and upper cabinets together.", "intent": "Inspect the kitchen layout at a wider scale.", "app": "SketchUp 2024", "details": null}, {"start_s": 14344.572, "end_s": 14354.667, "action": "Clicked repeatedly on the window and adjacent slatted panel, dragged and scrolled to zoom and reposition the camera, ending on a close-up of the window frame and vertical slats.", "intent": "Examine the window and backsplash slat geometry closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 14354.667, "end_s": 14364.193, "action": "Scrolled and clicked across the top faces of the vertical slats, progressively selecting them.", "intent": "Select multiple slat faces for modeling.", "app": "SketchUp 2024", "details": "Several top faces appear stippled as selected."}, {"start_s": 14364.193, "end_s": 14374.115, "action": "Continued clicking across the remaining slat tops, then zoomed/orbited the model and activated the Extrude tool.", "intent": "Extend or modify the selected slat geometry.", "app": "SketchUp 2024", "details": "The Extrude controls are visible with an offset value of approximately -84.43 mm."}, {"start_s": 14374.115, "end_s": 14384.162, "action": "Clicked and dragged on the window-area geometry while orbiting the camera, then adjusted the view to a more frontal perspective.", "intent": "Inspect and manipulate the window and surrounding slat geometry.", "app": "SketchUp 2024", "details": "The view changes from an angled close-up to a frontal view of the window."}, {"start_s": 14384.162, "end_s": 14394.278, "action": "Orbited and zoomed out from the window, moving through close and wide views until the broader kitchen cabinet layout was visible.", "intent": "Review the modeled kitchen assembly from different viewpoints.", "app": "SketchUp 2024", "details": "The final view shows the countertop, cabinets, window, and surrounding walls."}, {"start_s": 14394.278, "end_s": 14403.817, "action": "Zoomed and orbited around the kitchen, inspecting the window, countertop, cabinets, and corner layout from progressively wider angles.", "intent": "Review the overall kitchen model and component placement.", "app": "SketchUp 2024", "details": "The view ends on a wide perspective of the complete kitchen run."}, {"start_s": 14403.817, "end_s": 14414.403, "action": "Orbited and zoomed into the kitchen from the opposite side, then repeatedly clicked a cabinet or countertop area and typed the letter \"p\".", "intent": "Inspect or begin editing a selected kitchen component.", "app": "SketchUp 2024", "details": "The final view is an elevated interior perspective; the effect of the typed character is not visible."}, {"start_s": 14414.403, "end_s": 14427.249, "action": "Clicked the wall/window-area geometry and left the Push/Pull tool active; briefly scrolled without an obvious model change.", "intent": "Inspect or prepare the selected wall/window geometry for editing.", "app": "SketchUp 2024", "details": "Kitchen model remained in a close interior view."}, {"start_s": 14427.249, "end_s": 14438.594, "action": "Scrolled and used middle-button drags to orbit around the kitchen, moving from a close window view to a broader view of the window, cabinets, and countertop.", "intent": "Review the kitchen model from different angles.", "app": "SketchUp 2024", "details": "The camera changed substantially while the model geometry remained visually unchanged."}, {"start_s": 14438.594, "end_s": 14448.506, "action": "Used middle-button navigation and scrolling to orbit and zoom out, transitioning from the cabinet elevation to a distant exterior-style view of the kitchen assembly and surrounding floor plans.", "intent": "Reframe the model for an overall view.", "app": "SketchUp 2024", "details": "The kitchen became smaller in the viewport as the camera pulled back."}, {"start_s": 14448.506, "end_s": 14461.361, "action": "Dragged with the middle mouse button to orbit and zoom around the kitchen, moving from a distant overview to a higher, closer view of the L-shaped cabinets, window, backsplash, and tall unit.", "intent": "Inspect the overall cabinet layout from elevated angles.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible; navigation changed the viewpoint."}, {"start_s": 14461.361, "end_s": 14471.93, "action": "Scrolled and repeatedly clicked the window area, leaving the window faces and surrounding geometry selected while zooming into the window and adjacent cabinetry.", "intent": "Select and inspect the window geometry.", "app": "SketchUp 2024", "details": "The final view showed the window faces highlighted within a selection box."}, {"start_s": 14471.93, "end_s": 14491.93, "action": "Remained idle with the kitchen model and selected window geometry visible.", "intent": "Pause while reviewing the current model selection.", "app": "SketchUp 2024", "details": "No interaction events were recorded during this interval."}, {"start_s": 14491.93, "end_s": 14500.464, "action": "Scrolled and middle-clicked in the SketchUp model, typed \u201cb,\u201d then switched into the SketchUp application window.", "intent": "Navigate the model and activate SketchUp.", "app": "SketchUp", "details": "Kitchen model visible with the window area selected."}, {"start_s": 14500.464, "end_s": 14508.434, "action": "Pressed Enter, scrolled the model, opened the Materials tray, and opened its material-category menu.", "intent": "Browse available SketchUp materials.", "app": "SketchUp", "details": "Materials tray showed the Carpet, Fabrics, Leathers, Textiles and Wallpaper category before the category menu was opened."}, {"start_s": 14508.434, "end_s": 14527.183, "action": "Scrolled through the open Materials category menu and moved the highlight to Colors-Named without visibly confirming a selection.", "intent": "Review material categories.", "app": "SketchUp", "details": "The category menu remained open."}, {"start_s": 14527.183, "end_s": 14536.891, "action": "Selected the Glass and Mirrors category, browsed its swatches, and applied a translucent glass material to the kitchen window pane.", "intent": "Change the window material to a glass finish.", "app": "SketchUp", "details": "The Materials tray showed Translucent Glass Tinted after application."}, {"start_s": 14536.891, "end_s": 14547.315, "action": "Selected another glass swatch and clicked window geometry while browsing the Glass and Mirrors materials.", "intent": "Refine the window\u2019s glass appearance.", "app": "SketchUp", "details": "The active material displayed as Translucent Glass Blue."}, {"start_s": 14547.315, "end_s": 14551.992, "action": "Clicked and navigated around the model, zooming or orbiting away from the kitchen until a distant exterior view was shown.", "intent": "Inspect the applied window material from another viewpoint.", "app": "SketchUp", "details": "The final view showed the isolated kitchen structure and surrounding floor-plan geometry."}, {"start_s": 14551.992, "end_s": 14562.819, "action": "Remained in SketchUp while the scene and system status changed, then performed several zero-distance scroll inputs.", "intent": "Maintain the SketchUp modeling session.", "app": "SketchUp 2024", "details": "Displayed a kitchen model with the Materials tray open to Translucent Glass Blue."}, {"start_s": 14562.819, "end_s": 14579.328, "action": "Dragged and middle-clicked in the model, orbiting and zooming from a distant view into a close-up of the kitchen cabinetry and window.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "The view changed from the overall layout to close views of cabinets, countertop, window, and railing."}, {"start_s": 14579.328, "end_s": 14585.459, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom back from the close-up, revealing the broader L-shaped kitchen and surrounding floor-plan outlines.", "intent": "Review the model layout from an exterior perspective.", "app": "SketchUp 2024", "details": "The kitchen remained unchanged while the camera moved outward."}, {"start_s": 14585.459, "end_s": 14600.427, "action": "Paused on the SketchUp model, then performed several scroll inputs that adjusted the camera to a slightly wider view.", "intent": "Continue reviewing the kitchen model.", "app": "SketchUp 2024", "details": "The visible scene showed the kitchen wall, blue window, cabinets, and adjacent plan geometry."}, {"start_s": 14600.427, "end_s": 14610.506, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom around the kitchen, ending on a higher angled view showing upper cabinets, lower cabinets, countertop, window, and tall cabinet.", "intent": "Inspect the kitchen from another angle.", "app": "SketchUp 2024", "details": "The camera moved through wider and closer perspectives without visible geometry edits."}, {"start_s": 14610.506, "end_s": 14614.562, "action": "Scrolled to a wider overview, then clicked the window controls, hiding or resizing the SketchUp application; continued with additional scroll inputs.", "intent": "Adjust the viewing window and continue reviewing the model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen smaller in the workspace with surrounding floor-plan outlines visible."}, {"start_s": 14614.562, "end_s": 14626.977, "action": "Adjusted the SketchUp camera view with several scroll inputs, zooming out to reveal more of the kitchen model and surrounding floor-plan geometry.", "intent": "Reframe the 3D model for a wider view.", "app": "SketchUp 2024", "details": null}, {"start_s": 14626.977, "end_s": 14632.56, "action": "Orbited and zoomed the SketchUp view, then repeatedly clicked the tall cabinet or refrigerator-like unit until it became selected and highlighted.", "intent": "Select the tall kitchen unit for inspection or editing.", "app": "SketchUp 2024", "details": "The selected unit is outlined in blue and shown with a stippled face."}, {"start_s": 14632.56, "end_s": 14652.56, "action": "Remained inactive while the selected tall kitchen unit stayed visible in the SketchUp viewport.", "intent": "Pause while reviewing the selected model element.", "app": "SketchUp 2024", "details": null}, {"start_s": 14652.56, "end_s": 14663.994, "action": "Resumed the SketchUp view and scrolled to zoom farther out, leaving the tall unit selected while showing more of the surrounding model.", "intent": "Widen the model view while retaining the selection.", "app": "SketchUp 2024", "details": "System state changes were recorded before the view adjustment."}, {"start_s": 14663.994, "end_s": 14678.818, "action": "Continued scrolling to zoom farther out, reducing the kitchen model to a smaller view while keeping the tall unit selected.", "intent": "Inspect the model in a broader context.", "app": "SketchUp 2024", "details": null}, {"start_s": 14678.818, "end_s": 14686.704, "action": "Orbited the SketchUp camera around the selected tall unit with middle-click interactions and scroll inputs, ending on a closer angled view of the kitchen.", "intent": "Examine the selected unit and surrounding cabinetry from another angle.", "app": "SketchUp 2024", "details": "The tall unit remained highlighted throughout the final view."}, {"start_s": 14686.704, "end_s": 14705.544, "action": "Scrolled repeatedly in the SketchUp model and middle-clicked near the selected tall rectangular cabinet-like component.", "intent": "Adjust the 3D view around the selected model component.", "app": "SketchUp 2024", "details": "A kitchen cabinet layout was visible with the tall rectangular component selected."}, {"start_s": 14705.544, "end_s": 14714.256, "action": "Middle-clicked and scrolled to zoom and reposition the camera, then middle-clicked several times to orbit around the kitchen model and selected tall component.", "intent": "Inspect the selected component from different distances and angles.", "app": "SketchUp 2024", "details": "The view moved from a distant overall model view to a closer angled view; the selected component remained highlighted."}, {"start_s": 14714.256, "end_s": 14719.602, "action": "Middle-clicked and scrolled extensively to orbit and zoom toward the selected tall rectangular component beside the upper and lower cabinets.", "intent": "Refine the inspection view of the selected component.", "app": "SketchUp 2024", "details": "The camera ended on a close-up view of the selected front face and adjacent cabinetry."}, {"start_s": 14719.602, "end_s": 14739.602, "action": "Remained inactive while viewing the selected rectangular component and surrounding kitchen cabinetry.", "intent": "Review the current SketchUp model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 14739.602, "end_s": 14759.602, "action": "Remained inactive on the same close-up SketchUp view of the selected component.", "intent": "Continue reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 14759.602, "end_s": 14779.602, "action": "Remained inactive while the close-up model view stayed unchanged.", "intent": "Continue reviewing the current selection and surrounding cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 14779.602, "end_s": 14794.077, "action": "Resumed in SketchUp and middle-clicked around the selected tall rectangular cabinet-like component beside the kitchen cabinetry.", "intent": "Inspect or manipulate the selected model component.", "app": "SketchUp 2024", "details": "The selected rectangular face remained highlighted."}, {"start_s": 14794.077, "end_s": 14804.212, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom out from the selected component, revealing more of the kitchen model and surrounding floor-plan outlines.", "intent": "Adjust the 3D view to inspect the component in context.", "app": "SketchUp 2024", "details": "The view changed from a close-up to a wide view of the kitchen and model surroundings."}, {"start_s": 14804.212, "end_s": 14814.662, "action": "Middle-clicked and scrolled to orbit and zoom back toward the selected rectangular component, ending on a close view of its front and top faces.", "intent": "Refine the inspection angle and scale for the selected component.", "app": "SketchUp 2024", "details": "The component stayed selected while the camera moved from a wide view to a close-up."}, {"start_s": 14814.662, "end_s": 14820.276, "action": "Middle-clicked and scrolled to orbit around the selected component, moving through a low close angle before settling on a wider view of the kitchen wall and cabinet.", "intent": "Examine the component from another perspective.", "app": "SketchUp 2024", "details": "The selected face remained highlighted throughout the view changes."}, {"start_s": 14820.276, "end_s": 14840.276, "action": "Remained idle in SketchUp with the selected rectangular component and kitchen model visible.", "intent": "Pause while reviewing the current 3D model view.", "app": "SketchUp 2024", "details": "No interaction events were recorded."}, {"start_s": 14840.276, "end_s": 14856.83, "action": "Middle-clicked twice near the selected component to orbit the camera slightly, ending on a somewhat wider angled view of the kitchen model.", "intent": "Continue inspecting the selected component from a different angle.", "app": "SketchUp 2024", "details": "The component remained selected and highlighted."}, {"start_s": 14856.83, "end_s": 14870.454, "action": "Scrolled through the SketchUp model and adjusted the camera view around the selected tall cabinet-like component.", "intent": "Inspect the component from different viewpoints.", "app": "SketchUp 2024", "details": "The tall rectangular component remained selected while the kitchen layout and surrounding plan outlines shifted in view."}, {"start_s": 14870.454, "end_s": 14880.892, "action": "Orbited and zoomed around the kitchen model, briefly typed 'p', and changed the view to show the component from the opposite side.", "intent": "Review the component placement within the kitchen layout.", "app": "SketchUp 2024", "details": "The selected tall rectangular component was shown beside the cabinets from multiple angles."}, {"start_s": 14880.892, "end_s": 14890.948, "action": "Adjusted the camera and activated a face editing or push/pull-style tool on the large rectangular component.", "intent": "Prepare to modify the component geometry.", "app": "SketchUp 2024", "details": "The toolbar and status bar indicated a face-based editing tool, with a large white rectangular face visible."}, {"start_s": 14890.948, "end_s": 14900.395, "action": "Continued orbiting around the kitchen and interacted with the rectangular component using the active face tool.", "intent": "Inspect or position the component while editing its geometry.", "app": "SketchUp 2024", "details": "The tall component remained beside the cabinetry, and the view shifted to a more frontal angle."}, {"start_s": 14900.395, "end_s": 14910.35, "action": "Adjusted the view, typed a space and 'm', selected the component face, and performed several drag interactions on the model.", "intent": "Manipulate the selected component using SketchUp editing tools.", "app": "SketchUp 2024", "details": "The component face became stippled/selected, and the status bar showed a push/pull-style operation before further interactions."}, {"start_s": 14910.35, "end_s": 14920.004, "action": "Orbited and zoomed closer to the kitchen corner, selected the tall component, and initiated a move operation on it.", "intent": "Position or prepare to reposition the tall component beside the cabinets.", "app": "SketchUp 2024", "details": "The component was outlined in blue, and the status bar indicated the Move tool was ready."}, {"start_s": 14920.004, "end_s": 14930.199, "action": "Adjusted the SketchUp camera around the kitchen model, orbiting and repositioning the view while leaving the tall cabinet selected.", "intent": "Inspect the kitchen cabinetry from a different angle.", "app": "SketchUp 2024", "details": "The selected cabinet remained outlined in blue."}, {"start_s": 14930.199, "end_s": 14941.454, "action": "Orbited and zoomed the SketchUp view around the kitchen, then initiated a move operation on the selected cabinet and positioned the cursor over its geometry.", "intent": "Reposition or prepare to reposition the selected cabinet.", "app": "SketchUp 2024", "details": "The status bar indicated a move operation and the cabinet edge was highlighted."}, {"start_s": 14941.454, "end_s": 14951.204, "action": "Continued the move operation and clicked on the cabinet geometry while navigating the close-up view.", "intent": "Adjust the cabinet placement or move reference point.", "app": "SketchUp 2024", "details": "The view stayed tightly focused on cabinet edges and the move distance changed."}, {"start_s": 14951.204, "end_s": 14961.172, "action": "Entered 5mm and confirmed it, applying a precise move distance to the selected cabinet, then orbited the model to review the result.", "intent": "Make a 5 mm adjustment to the cabinet position.", "app": "SketchUp 2024", "details": "The distance field displayed 5 and the cabinet was shown selected after the adjustment."}, {"start_s": 14961.172, "end_s": 14968.844, "action": "Exited the active adjustment and navigated the SketchUp camera through extensive zooming and orbiting, ending on a wider view of the kitchen cabinetry.", "intent": "Review the cabinet placement in the overall kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen wall cabinets, base cabinets, and tall cabinet together."}, {"start_s": 14968.844, "end_s": 14979.174, "action": "Zoomed and orbited farther out from the kitchen model, revealing the surrounding floor-plan drawings and leaving the cabinetry unselected.", "intent": "Inspect the edited kitchen layout in the broader model context.", "app": "SketchUp 2024", "details": "The final view was a distant overview with multiple plan outlines visible."}, {"start_s": 14979.174, "end_s": 14999.11, "action": "Viewed the SketchUp kitchen model and scrolled slightly, leaving the cabinet layout and surrounding plan outlines visible.", "intent": "Inspect the kitchen model from the current viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 14999.11, "end_s": 15008.79, "action": "Middle-clicked and scrolled repeatedly to orbit and reposition the camera around the kitchen model, changing from a wider view to a closer angled view.", "intent": "Adjust the 3D view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 15008.79, "end_s": 15018.892, "action": "Continued orbiting and scrolling around the model, moving from an elevated overview to a close view of the upper cabinets and tall cabinet fronts.", "intent": "Inspect cabinet geometry from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 15018.892, "end_s": 15029.894, "action": "Scrolled and clicked repeatedly on the tall cabinet area, leaving a cabinet component selected and zooming in toward its upper front face.", "intent": "Select and inspect the tall cabinet component.", "app": "SketchUp 2024", "details": null}, {"start_s": 15029.894, "end_s": 15039.59, "action": "Clicked and dragged on the selected cabinet, opened its context menu with a right-click, then clicked another point and entered 2 followed by Enter while SketchUp became hidden.", "intent": "Modify or position the selected cabinet using direct manipulation and a numeric input.", "app": "SketchUp 2024", "details": null}, {"start_s": 15039.59, "end_s": 15049.324, "action": "Typed l, clicked to dismiss or continue the operation, and scrolled to reposition the view; activated the Line tool and set an endpoint along the cabinet base, with the Measurements box showing 2040.00 mm.", "intent": "Draw or measure a line along the cabinet base.", "app": "SketchUp 2024", "details": "SketchUp displayed the Line tool status and a 2040.00 mm measurement."}, {"start_s": 15049.324, "end_s": 15055.358, "action": "Orbited and adjusted the SketchUp camera around the kitchen cabinetry, moving from an overhead view to a more frontal view of the cabinets, drawers, window, and tall units.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 15055.358, "end_s": 15066.67, "action": "Paused on the kitchen model, then zoomed out to reveal the full cabinet layout and surrounding floor-plan linework.", "intent": "Review the overall placement of the kitchen model within the plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 15066.67, "end_s": 15076.588, "action": "Orbited and zoomed toward the tall cabinet area, then selected the front face of a tall cabinet unit.", "intent": "Inspect and select the tall cabinet geometry.", "app": "SketchUp 2024", "details": "The selected cabinet face was outlined in blue."}, {"start_s": 15076.588, "end_s": 15086.62, "action": "Clicked repeatedly around the selected tall cabinet and adjusted the view while keeping the cabinet geometry selected.", "intent": "Refine the selection or inspect the cabinet component closely.", "app": "SketchUp 2024", "details": "The cabinet appeared within a dotted selection bounding box."}, {"start_s": 15086.62, "end_s": 15097.326, "action": "Scrolled and dragged the selected cabinet geometry, moving it along the model while SketchUp displayed edge and face inferences and changing distance readouts.", "intent": "Move or position the selected cabinet component in the kitchen model.", "app": "SketchUp 2024", "details": "The Move tool remained active and showed inference labels such as On Edge and On Face."}, {"start_s": 15097.326, "end_s": 15107.55, "action": "Dragged the selected cabinet component and adjusted the camera around it, then left the tall cabinet assembly visible in a close frontal view.", "intent": "Continue positioning and inspect the cabinet placement.", "app": "SketchUp 2024", "details": "The view ended with the tall cabinet assembly enlarged beside the upper cabinets and drawers."}, {"start_s": 15107.55, "end_s": 15117.58, "action": "Selected the right cabinet panel and repeatedly clicked near its upper edge, leaving the panel highlighted with a selection box.", "intent": "Select and prepare the cabinet geometry for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 15117.58, "end_s": 15128.364, "action": "Opened the context menu on the selected panel, entered a numeric value of 2, switched to the Line tool, and positioned the cursor on the panel.", "intent": "Begin editing the selected cabinet panel and drawing geometry on it.", "app": "SketchUp 2024", "details": "The context menu showed Entity Info, Erase, Hide, Select, and other geometry commands."}, {"start_s": 15128.364, "end_s": 15137.964, "action": "Orbited and adjusted the camera around the cabinet, then repeatedly clicked near the upper-right panel area while the model view changed to a closer angled view.", "intent": "Inspect and position the cabinet geometry for further editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 15137.964, "end_s": 15146.062, "action": "Selected the cabinet geometry, activated Move, and dragged a horizontal edge or component downward, creating a new horizontal division across the tall panel.", "intent": "Modify the cabinet panel layout by moving selected geometry.", "app": "SketchUp 2024", "details": "The Move tool displayed a distance readout of 275.17 mm."}, {"start_s": 15146.062, "end_s": 15156.324, "action": "Continued moving the selected geometry while zooming and orbiting around the cabinet, then returned to a wider front view showing the revised horizontal panel line and surrounding kitchen cabinets.", "intent": "Inspect the result of the cabinet geometry modification.", "app": "SketchUp 2024", "details": "The Move tool showed a distance of approximately 546.83 mm during the close-up view."}, {"start_s": 15156.324, "end_s": 15164.116, "action": "Selected geometry on the cabinet face, adjusted the view with scrolling and orbiting, and zoomed out to reveal the full L-shaped kitchen model and nearby floor-plan outlines.", "intent": "Review the edited cabinet within the overall kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 15164.116, "end_s": 15184.116, "action": "Remained idle while viewing the SketchUp kitchen model and related 2D layouts.", "intent": "Review the current 3D kitchen design.", "app": "SketchUp", "details": null}, {"start_s": 15184.116, "end_s": 15204.116, "action": "Remained on the unchanged SketchUp model; system state changes occurred without a visible modeling action.", "intent": "Continue reviewing the design.", "app": "SketchUp", "details": "Network, power, input, and memory status changes were recorded."}, {"start_s": 15204.116, "end_s": 15211.392, "action": "Scrolled and middle-clicked in the SketchUp viewport to adjust the camera, zooming out and changing the view of the kitchen model; then switched to Microsoft Edge.", "intent": "Reorient the model view and open the related web page.", "app": "SketchUp", "details": "The final event switched to Microsoft Edge."}, {"start_s": 15211.392, "end_s": 15228.844, "action": "Displayed the Microsoft Edge page titled \u201cExtension Sketchup & 1001 Fen\u00eatres 3D,\u201d waited for it to load, typed \u201ckit,\u201d and interacted with the page before hiding the window.", "intent": "Search or browse the SketchUp and 3D windows resource page.", "app": "Microsoft Edge", "details": "The page showed \u201cPlugin SketchUp and 3D Windows\u201d content."}, {"start_s": 15228.844, "end_s": 15237.596, "action": "Returned to SketchUp, scrolled and middle-clicked to orbit the kitchen model to a different viewpoint, then clicked near the top toolbar and opened a SketchUp sign-in prompt.", "intent": "Inspect another model view and invoke a feature requiring authentication.", "app": "SketchUp", "details": "The model changed to a front-facing view and the Sign In dialog appeared."}, {"start_s": 15237.596, "end_s": 15244.653, "action": "Left the SketchUp Sign In dialog open and clicked near the lower screen area without changing the dialog.", "intent": "Attempt to continue using the sign-in-gated feature.", "app": "SketchUp", "details": "The dialog stated that sign-in was required and offered Sign In and Cancel."}, {"start_s": 15244.653, "end_s": 15255.084, "action": "Opened the 3D Warehouse window from SketchUp and focused its content search field.", "intent": "Access the 3D Warehouse to search for a model.", "app": "SketchUp 2024", "details": null}, {"start_s": 15255.084, "end_s": 15265.883, "action": "Entered and edited a search query, resulting in the text \u201ckitchen\u201d in the 3D Warehouse search field.", "intent": "Search for kitchen-related models.", "app": "SketchUp 2024", "details": "Additional characters were typed and then deleted during query editing."}, {"start_s": 15265.883, "end_s": 15273.883, "action": "Completed the query as \u201ckitchen equipment\u201d and clicked the search button.", "intent": "Search the 3D Warehouse for kitchen equipment models.", "app": "SketchUp 2024", "details": null}, {"start_s": 15273.883, "end_s": 15283.522, "action": "Waited for the search results and scrolled through the displayed kitchen equipment model cards.", "intent": "Review available search results.", "app": "SketchUp 2024", "details": "Results were shown in the Models view."}, {"start_s": 15283.522, "end_s": 15293.474, "action": "Scrolled further down through the kitchen equipment search results to inspect additional model cards.", "intent": "Continue reviewing available kitchen equipment models.", "app": "SketchUp 2024", "details": null}, {"start_s": 15293.474, "end_s": 15301.075, "action": "Continued scrolling through the 3D Warehouse results, revealing more kitchen equipment models and kitchen scene thumbnails.", "intent": "Browse deeper search results for a suitable model.", "app": "SketchUp 2024", "details": null}, {"start_s": 15301.075, "end_s": 15312.682, "action": "Scrolled through the 3D Warehouse results for \u201ckitchen equipment\u201d and resized the Explorer window while continuing to browse model cards.", "intent": "Browse available kitchen equipment models.", "app": "SketchUp 2024", "details": null}, {"start_s": 15312.682, "end_s": 15325.051, "action": "Continued scrolling through the \u201ckitchen equipment\u201d model results, moving from individual model cards to the results section showing 1,134 models.", "intent": "Review additional kitchen equipment models.", "app": "SketchUp 2024", "details": null}, {"start_s": 15325.051, "end_s": 15336.064, "action": "Scrolled slightly further through the results, then clicked the download control on the \u201cKITCHEN EQUIPMENT\u201d model card.", "intent": "Attempt to download a kitchen equipment model.", "app": "SketchUp 2024", "details": "The clicked control displayed a Download tooltip."}, {"start_s": 15336.064, "end_s": 15356.064, "action": "Waited with the \u201cYou\u2019ve reached your daily download limit\u201d dialog open; the dialog displayed explanatory text and an embedded promotional video.", "intent": "Review the download-limit notice after the download attempt.", "app": "SketchUp 2024", "details": "No interaction events were recorded."}, {"start_s": 15356.064, "end_s": 15376.064, "action": "Remained idle while the daily download-limit dialog and its promotional video continued displaying.", "intent": "Wait while reviewing the download-limit message.", "app": "SketchUp 2024", "details": "No interaction events were recorded."}, {"start_s": 15376.064, "end_s": 15387.861, "action": "Clicked within the promotional content area, then clicked the download control on the kitchen equipment model card again; the download-limit dialog was no longer visible.", "intent": "Retry the model download after reviewing the limit notice.", "app": "SketchUp 2024", "details": "The final click targeted the Download control."}, {"start_s": 15387.861, "end_s": 15392.601, "action": "Confirmed loading the selected 3D Warehouse kitchen equipment model into SketchUp, then waited while the Download Progress dialog appeared.", "intent": "Download a kitchen equipment component into the SketchUp model.", "app": "SketchUp", "details": "3D Warehouse showed a Load Into Model confirmation followed by Download Progress."}, {"start_s": 15392.601, "end_s": 15397.868, "action": "Returned to the SketchUp model, viewed the kitchen layout, and encountered a File Version Warning stating that the imported component was created in a newer SketchUp version; clicked OK.", "intent": "Acknowledge the version compatibility warning for the imported component.", "app": "SketchUp", "details": "The warning dialog was visible over the kitchen model."}, {"start_s": 15397.868, "end_s": 15407.795, "action": "Navigated through the SketchUp scene with repeated scroll actions, changing from a close kitchen view to a wider view that revealed separate kitchen equipment components; remained in component placement mode.", "intent": "Inspect the imported kitchen equipment and its placement relative to the model.", "app": "SketchUp", "details": "The view zoomed out to show the kitchen shell, loose equipment components, and a standing figure."}, {"start_s": 15407.795, "end_s": 15416.68, "action": "Adjusted the SketchUp camera with middle-button navigation and scrolling, orbiting and zooming around the loose equipment and kitchen layout.", "intent": "Review the imported equipment and kitchen layout from different viewpoints.", "app": "SketchUp", "details": "The view shifted from a wide scene to a closer view of the refrigerator, cooktop, sink, dish rack, and cabinets."}, {"start_s": 15416.68, "end_s": 15431.2, "action": "Continued orbiting and zooming around the kitchen equipment, then zoomed back to a wider scene and switched to the 3D Warehouse window.", "intent": "Finish inspecting the model and return to the component search results.", "app": "SketchUp", "details": "The final SketchUp view showed the kitchen model, loose equipment, standing figure, and floor plans before 3D Warehouse became active."}, {"start_s": 15431.2, "end_s": 15438.49, "action": "Viewed the 3D Warehouse search for \u201ckitchen equipment,\u201d clicked near the top of the results area, and scrolled through the loaded model cards.", "intent": "Browse additional kitchen equipment models for possible insertion.", "app": "SketchUp 3D Warehouse", "details": "Search results loaded from placeholders and displayed multiple kitchen equipment listings."}, {"start_s": 15438.49, "end_s": 15444.29, "action": "Scrolled through the 3D Warehouse results for \u201ckitchen equipment,\u201d revealing additional model cards.", "intent": "Review available kitchen equipment models.", "app": "SketchUp 3D Warehouse", "details": null}, {"start_s": 15444.29, "end_s": 15461.191, "action": "Scrolled further through the kitchen equipment results and clicked a model\u2019s download control, opening a load-into-model prompt.", "intent": "Find and initiate loading a kitchen equipment model into SketchUp.", "app": "SketchUp 3D Warehouse", "details": "The prompt appeared at the end of the span."}, {"start_s": 15461.191, "end_s": 15470.563, "action": "Confirmed the load-into-model prompt, waited for the download, returned to the SketchUp model, and adjusted the view with zoom/orbit navigation.", "intent": "Load the selected warehouse component and inspect it in the model.", "app": "SketchUp", "details": "The SketchUp canvas showed the kitchen layout and imported equipment objects."}, {"start_s": 15470.563, "end_s": 15489.2, "action": "Navigated and zoomed around the SketchUp scene, selected an imported object, moved the view closer to the kitchen, and opened the 3D Warehouse dialog.", "intent": "Position or inspect the imported kitchen component within the model.", "app": "SketchUp", "details": "The kitchen cabinetry became prominently framed in the final view."}, {"start_s": 15489.2, "end_s": 15501.482, "action": "Returned to 3D Warehouse, focused the search field, deleted the previous query, and entered \u201cwindow.\u201d", "intent": "Search the warehouse for a kitchen window model.", "app": "SketchUp 3D Warehouse", "details": "The search field displayed the partial query \u201ckitchen\u201d before the next span completed it."}, {"start_s": 15501.482, "end_s": 15511.522, "action": "Completed the search query as \u201ckitchen window,\u201d clicked the search button, and scrolled through the resulting Kitchen Window model cards.", "intent": "Review kitchen window models for possible use in the SketchUp design.", "app": "SketchUp 3D Warehouse", "details": "Results included cards titled \u201cKitchen Window.\u201d"}, {"start_s": 15511.522, "end_s": 15518.114, "action": "Scrolled through the 3D Warehouse results for \u201ckitchen window,\u201d reviewing multiple model thumbnails and listings.", "intent": "Review available kitchen-window models.", "app": "SketchUp 2024", "details": null}, {"start_s": 15518.114, "end_s": 15531.753, "action": "Scrolled farther through the \u201ckitchen window\u201d 3D Warehouse results, then closed the Warehouse panel to return to the SketchUp model.", "intent": "Continue browsing window models and return to the design.", "app": "SketchUp 2024", "details": "The Warehouse panel was hidden at the end of the span."}, {"start_s": 15531.753, "end_s": 15541.808, "action": "Used middle-button navigation and scrolling to orbit and zoom the SketchUp camera from a closer kitchen view to a wider view of the kitchen layout and surrounding components.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 15541.808, "end_s": 15561.808, "action": "Made a small camera adjustment and then left the SketchUp scene visible, showing the kitchen cabinetry, appliances, sink, cooktop, and accessories in the workspace.", "intent": "Review the overall kitchen arrangement.", "app": "SketchUp 2024", "details": "System configuration and network-related changes were reported during the interval; no corresponding modeling action was visible."}, {"start_s": 15561.808, "end_s": 15572.497, "action": "Scrolled and used middle-button navigation to orbit and zoom around the kitchen scene, ending on a more elevated, distant view of the layout and surrounding components.", "intent": "Examine the kitchen model from additional angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 15572.497, "end_s": 15581.627, "action": "Continued orbiting and zooming the SketchUp camera, moving from the distant scene into a close-up view of the L-shaped cabinetry, window, backsplash, and tall cabinets.", "intent": "Inspect the kitchen cabinetry and window area closely.", "app": "SketchUp 2024", "details": null}, {"start_s": 15581.627, "end_s": 15601.627, "action": "Remained idle while viewing the SketchUp kitchen cabinetry model.", "intent": "Review the current 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 15601.627, "end_s": 15611.889, "action": "Scrolled to adjust the view, then middle-clicked to orbit from a close kitchen view to a wider perspective.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": "The view widened to show the kitchen assembly and surrounding plan outlines."}, {"start_s": 15611.889, "end_s": 15621.905, "action": "Orbited and zoomed the scene, selected a tall cabinet-like component, and began moving it; the view then zoomed far out with the component still selected.", "intent": "Position or inspect a cabinet component in the scene.", "app": "SketchUp 2024", "details": "The selected component was outlined in blue and the Move tool distance field was visible before the distant view appeared."}, {"start_s": 15621.905, "end_s": 15631.841, "action": "Navigated around the scene, repeatedly clicked near the detached kitchen components, and selected the refrigerator-like object while orbiting to a wider view.", "intent": "Inspect and manipulate detached kitchen objects relative to the kitchen layout.", "app": "SketchUp 2024", "details": "The refrigerator-like object and other appliance components were visible outside the main kitchen assembly."}, {"start_s": 15631.841, "end_s": 15640.785, "action": "Adjusted the view, continued manipulating the selected refrigerator-like component, typed a key, and switched to the Rotate tool; the object remained selected beside the kitchen.", "intent": "Rotate or reposition the refrigerator-like component.", "app": "SketchUp 2024", "details": "The Rotate tool protractor appeared around the selected object and the angle field was shown."}, {"start_s": 15640.785, "end_s": 15650.003, "action": "Scrolled and rotated the selected refrigerator-like component around its base, changing the displayed angle while viewing it against the kitchen model.", "intent": "Orient the refrigerator-like component in the scene.", "app": "SketchUp 2024", "details": "The object stayed outlined in blue; rotation guidance indicated the red axis and angles of approximately 48.5 and 61.5 degrees."}, {"start_s": 15650.003, "end_s": 15662.003, "action": "Unhid SketchUp and adjusted the view around the selected refrigerator-like cabinet with scroll input, leaving it selected in the kitchen model.", "intent": "Inspect the selected kitchen appliance from a different view.", "app": "SketchUp 2024", "details": null}, {"start_s": 15662.003, "end_s": 15672.002, "action": "Exited the active rotation interaction, adjusted the camera with scroll input, and middle-clicked to reposition the view around the selected appliance.", "intent": "Reframe the selected appliance for inspection.", "app": "SketchUp 2024", "details": "The rotation tool remained active and showed an unlocked plane."}, {"start_s": 15672.002, "end_s": 15678.249, "action": "Clicked to establish rotation points and rotated the selected appliance to a different angle, ending with the refrigerator-like cabinet still selected.", "intent": "Change the viewing or orientation angle of the selected appliance.", "app": "SketchUp 2024", "details": "The on-screen angle reached 45 degrees."}, {"start_s": 15678.249, "end_s": 15686.419, "action": "Scrolled extensively while rotating or orbiting the model, moving from the kitchen view to a distant overview and then back toward the selected appliance.", "intent": "Navigate and inspect the model from multiple scales and angles.", "app": "SketchUp 2024", "details": "The view briefly showed the model from far away before returning to a close-up."}, {"start_s": 15686.419, "end_s": 15696.385, "action": "Entered 90 and confirmed it, continued adjusting the view, clicked to complete the rotation, and switched back to the Select tool with the appliance selected in a wider kitchen view.", "intent": "Set a precise rotation angle and review the resulting placement.", "app": "SketchUp 2024", "details": "The rotation angle field displayed 90.0 before the view was zoomed out."}, {"start_s": 15696.385, "end_s": 15707.043, "action": "Typed m and navigated the view with scroll and middle-click input, then selected the lower portion of the appliance and began moving it; the close-up ended with a move distance of about 97.66 mm shown.", "intent": "Move or adjust the selected appliance geometry.", "app": "SketchUp 2024", "details": "The Move tool status indicated that the pre-selected items were being moved."}, {"start_s": 15707.043, "end_s": 15716.601, "action": "Navigated around the kitchen model with scrolls and middle-button view movements, then repositioned the camera from a close cabinet view to a wider room view.", "intent": "Inspect the kitchen layout and cabinet placement.", "app": "SketchUp 2024", "details": "The view changed from a close-up of cabinetry to a wider kitchen perspective."}, {"start_s": 15716.601, "end_s": 15727.291, "action": "Orbited and zoomed out around the model, revealing the L-shaped kitchen, upper cabinets, drawers, refrigerator, and surrounding floor-plan geometry.", "intent": "Review the overall kitchen arrangement from different angles.", "app": "SketchUp 2024", "details": "The camera moved to elevated wider views of the kitchen."}, {"start_s": 15727.291, "end_s": 15736.779, "action": "Selected and inspected the tall cabinet beside the refrigerator while orbiting and zooming toward its lower edge.", "intent": "Examine the cabinet's position and geometry near the refrigerator.", "app": "SketchUp 2024", "details": "The tall white cabinet was outlined in blue as the view moved closer."}, {"start_s": 15736.779, "end_s": 15746.497, "action": "Adjusted the selected cabinet with move-tool clicks and a 5.00 mm distance entry, then changed the view slightly while keeping the cabinet selected.", "intent": "Fine-tune the cabinet placement relative to the adjacent drawers and refrigerator.", "app": "SketchUp 2024", "details": "The status area showed an active move operation with Distance 5.00 mm."}, {"start_s": 15746.497, "end_s": 15756.089, "action": "Navigated to a wider perspective, selected the refrigerator, and activated the Scale tool to begin resizing it.", "intent": "Prepare to adjust the refrigerator dimensions in the kitchen model.", "app": "SketchUp 2024", "details": "The refrigerator became outlined in yellow and the Scale tool displayed a 0.97 scale value."}, {"start_s": 15756.089, "end_s": 15764.785, "action": "Dragged scale handles on the selected refrigerator while orbiting and zooming around it, leaving the refrigerator selected with scale grips visible.", "intent": "Resize and inspect the refrigerator model from multiple viewpoints.", "app": "SketchUp 2024", "details": "The final view showed the refrigerator prominently selected with green scale handles."}, {"start_s": 15764.785, "end_s": 15774.627, "action": "Adjusted the selected tall cabinet/refrigerator component with the Scale tool, dragging its grips to resize it, then zoomed out to view it within the kitchen model.", "intent": "Resize the selected kitchen appliance component.", "app": "SketchUp 2024", "details": "The component remained selected with scale grips visible."}, {"start_s": 15774.627, "end_s": 15783.299, "action": "Exited the scaling operation, selected the appliance, and navigated the camera around the kitchen, zooming and orbiting to inspect the overall layout.", "intent": "Inspect the resized appliance in the kitchen context.", "app": "SketchUp 2024", "details": "The view changed from a selected appliance close-up to a wider kitchen perspective."}, {"start_s": 15783.299, "end_s": 15792.715, "action": "Zoomed and orbited toward the countertop and refrigerator area, inspected the cabinetry and appliance closely, then pulled back to a wider model view.", "intent": "Review the kitchen cabinetry and appliance placement from different viewpoints.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible; the camera view changed substantially."}, {"start_s": 15792.715, "end_s": 15803.849, "action": "Orbited and zoomed around the kitchen model, moving from a distant perspective to a close overhead view of the refrigerator and adjacent cabinet.", "intent": "Examine the appliance and neighboring cabinet geometry.", "app": "SketchUp 2024", "details": "The Orbit tool was active during part of the navigation."}, {"start_s": 15803.849, "end_s": 15813.578, "action": "Continued orbiting and zooming around the upper cabinetry and refrigerator, then selected the adjacent white cabinet component.", "intent": "Inspect and select the cabinet next to the refrigerator.", "app": "SketchUp 2024", "details": "The adjacent cabinet was outlined in blue in the later view."}, {"start_s": 15813.578, "end_s": 15826.739, "action": "Activated the Move tool on the selected cabinet, clicked a group endpoint, and dragged the cabinet while the distance readout updated.", "intent": "Begin repositioning the selected cabinet component.", "app": "SketchUp 2024", "details": "The Move tool remained active and the cabinet stayed selected; no completed placement was evident."}, {"start_s": 15826.739, "end_s": 15837.269, "action": "Selected a cabinet edge, entered a 5mm distance, confirmed it, and scrolled the SketchUp view.", "intent": "Set a precise 5mm movement or offset on the selected geometry.", "app": "SketchUp 2024", "details": "The Measurements box visibly showed 5.00 mm."}, {"start_s": 15837.269, "end_s": 15846.675, "action": "Exited the distance entry, orbited the model around the refrigerator and adjacent cabinetry, and changed to a wider elevated view.", "intent": "Inspect the refrigerator cabinet assembly from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 15846.675, "end_s": 15856.981, "action": "Orbited and zoomed closely around the refrigerator, moving from its front toward the lower cabinet area and side surfaces.", "intent": "Examine the refrigerator placement and surrounding geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 15856.981, "end_s": 15865.757, "action": "Clicked around the refrigerator, zoomed out, selected the refrigerator assembly, and initiated the Scale tool.", "intent": "Prepare the refrigerator model for dimensional adjustment.", "app": "SketchUp 2024", "details": "The refrigerator was displayed with a scale bounding box and green handles."}, {"start_s": 15865.757, "end_s": 15874.308, "action": "Dragged scale handles to adjust the selected refrigerator assembly, then orbited and zoomed out to review it within the kitchen layout.", "intent": "Resize and visually check the refrigerator placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 15874.308, "end_s": 15884.021, "action": "Orbited and zoomed toward the refrigerator, clicked its lower front area, and selected the refrigerator geometry for closer inspection.", "intent": "Inspect or select the adjusted refrigerator assembly.", "app": "SketchUp 2024", "details": "The final view showed the refrigerator selected with blue edges."}, {"start_s": 15884.021, "end_s": 15893.887, "action": "Adjusted the selected refrigerator assembly with the Scale tool, entered a scale value, and scrolled and clicked around the model while maintaining the selection.", "intent": "Resize the refrigerator model.", "app": "SketchUp 2024", "details": "The refrigerator was highlighted with scale handles and the measurements box showed a scale value of 0.99, later 1.07."}, {"start_s": 15893.887, "end_s": 15902.1, "action": "Orbited and zoomed the kitchen model, selected the refrigerator, and began scaling it from an upper corner handle.", "intent": "Reposition the view and adjust the refrigerator size.", "app": "SketchUp 2024", "details": "The refrigerator changed from a wider kitchen view to a close-up with a yellow selection outline and active scale handles."}, {"start_s": 15902.1, "end_s": 15911.891, "action": "Dragged across the selected refrigerator and orbited the camera around it, then clicked away and changed to an overall kitchen view.", "intent": "Inspect the refrigerator placement from different angles.", "app": "SketchUp 2024", "details": "The refrigerator remained outlined in blue before the camera moved to a wider front-facing view."}, {"start_s": 15911.891, "end_s": 15921.683, "action": "Orbited and zoomed toward the refrigerator, selected it, briefly hid and restored the application view, then started another drag on the model.", "intent": "Continue inspecting and adjusting the refrigerator in the kitchen layout.", "app": "SketchUp 2024", "details": "The view alternated between close and wider angles; the refrigerator was selected with a blue outline."}, {"start_s": 15921.683, "end_s": 15930.964, "action": "Completed the camera drag, clicked and orbited around the kitchen, and zoomed out to frame the cabinets, window, refrigerator, and surrounding layout.", "intent": "Review the refrigerator and kitchen arrangement in context.", "app": "SketchUp 2024", "details": "The final view showed the complete L-shaped kitchen with the refrigerator installed beside the tall cabinetry."}, {"start_s": 15930.964, "end_s": 15941.635, "action": "Orbited the camera around the completed kitchen model and adjusted the view between frontal and elevated angles.", "intent": "Review the overall kitchen model from multiple viewpoints.", "app": "SketchUp 2024", "details": "The model remained unchanged while the view showed the cabinets, countertop, window, refrigerator, and adjacent tall unit."}, {"start_s": 15941.635, "end_s": 15948.163, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom out from the kitchen cabinetry, revealing the broader kitchen model and surrounding floor plans.", "intent": "Review the kitchen layout from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 15948.163, "end_s": 15957.088, "action": "Waited while a Windows Explorer window was moved and resized; the SketchUp view remained unchanged.", "intent": "Adjust window placement without changing the model view.", "app": "SketchUp 2024", "details": "Windows Explorer was resized to a narrow strip."}, {"start_s": 15957.088, "end_s": 15976.654, "action": "Scrolled to zoom farther out and middle-clicked to adjust the camera, leaving the kitchen smaller within the surrounding floor-plan drawings.", "intent": "Inspect the kitchen in relation to the broader plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 15976.654, "end_s": 15985.397, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom farther out, then activated an orbit-style control and dragged to change the camera angle.", "intent": "Explore alternate overall views of the kitchen model.", "app": "SketchUp 2024", "details": "The view expanded to show the kitchen, multiple floor plans, and a standing figure."}, {"start_s": 15985.397, "end_s": 15994.67, "action": "Scrolled and middle-clicked to zoom back toward the kitchen, transitioning from the distant model view to a closer view of the cabinets, window, and refrigerator.", "intent": "Return to a detailed inspection of the kitchen cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 15994.67, "end_s": 16005.213, "action": "Selected the upper cabinet face, zoomed in, typed a character, and used a drag-based tool on the selected face; the close-up ended with the face still selected and an on-edge measurement cue visible.", "intent": "Edit or measure the selected upper cabinet component.", "app": "SketchUp 2024", "details": "The selected cabinet face remained highlighted; the status bar showed a pick-point/offset operation and a distance of approximately 36.37 mm."}, {"start_s": 16005.213, "end_s": 16014.535, "action": "Selected the upper-left panel of the tall cabinet, activated the offset operation, and entered 18mm to create an inset rectangular outline.", "intent": "Create an 18mm inset on the cabinet panel.", "app": "SketchUp 2024", "details": "The Distance field shows 18mm and the inset outline is visible."}, {"start_s": 16014.535, "end_s": 16025.036, "action": "Confirmed the 18mm offset, adjusted the view, selected the upper-right cabinet panel, and activated the offset tool for that panel.", "intent": "Apply the same inset treatment to the adjacent cabinet panel.", "app": "SketchUp 2024", "details": "The upper-left panel has an inset outline, and the upper-right panel is selected with the offset tool active."}, {"start_s": 16025.036, "end_s": 16033.844, "action": "Entered and confirmed 18mm for the selected upper-right panel, then adjusted the view and selected the lower-left cabinet panel.", "intent": "Create a matching 18mm inset on the upper-right panel and continue to the next panel.", "app": "SketchUp 2024", "details": "Matching inset outlines are visible on both upper cabinet panels; the lower-left panel is selected at the end."}, {"start_s": 16033.844, "end_s": 16043.541, "action": "Adjusted the view around the tall cabinet while keeping the lower-left panel selected and the offset operation active.", "intent": "Prepare the lower-left cabinet panel for an offset.", "app": "SketchUp 2024", "details": "No numeric offset value was entered during this interval."}, {"start_s": 16043.541, "end_s": 16053.709, "action": "Selected the lower-left cabinet panel, entered and confirmed an 18mm offset, adjusted the view, and left the offset tool active.", "intent": "Create a matching inset on the lower-left cabinet panel.", "app": "SketchUp 2024", "details": "The lower-left panel is selected and the Distance field shows 18mm after confirmation."}, {"start_s": 16053.709, "end_s": 16063.904, "action": "Adjusted the view, selected the lower-right cabinet panel, entered 18mm, and confirmed the offset to create its inset outline.", "intent": "Complete the matching inset treatment on the lower-right cabinet panel.", "app": "SketchUp 2024", "details": "The lower-right panel shows a new inset rectangular outline with the selection pattern still visible."}, {"start_s": 16063.904, "end_s": 16072.868, "action": "Repositioned the SketchUp view around the tall cabinet and refrigerator, scrolling and clicking to select the upper-left cabinet panel.", "intent": "Inspect and select the cabinet component for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 16072.868, "end_s": 16082.469, "action": "Adjusted the camera to a higher, wider view of the cabinet and refrigerator, then selected the cabinet assembly and began a tool command with the typed letter \u201ct\u201d.", "intent": "Prepare the cabinet geometry for a measurement or transformation operation.", "app": "SketchUp 2024", "details": null}, {"start_s": 16082.469, "end_s": 16091.686, "action": "Selected the cabinet top area, activated the Tape Measure tool, and entered 30 mm followed by Enter to create or set a guide measurement.", "intent": "Place a measured guide on the cabinet geometry.", "app": "SketchUp 2024", "details": "The Tape Measure status bar and guide markers are visible."}, {"start_s": 16091.686, "end_s": 16101.971, "action": "Entered 40 mm followed by Enter, then used additional tool inputs and orbited the view around the cabinet top.", "intent": "Add another measured guide or offset while refining the cabinet geometry.", "app": "SketchUp 2024", "details": "The status bar shows a 40 mm length during the guide operation."}, {"start_s": 16101.971, "end_s": 16111.173, "action": "Orbited and zoomed around the cabinet, selected its top/right geometry, and used a push/pull-style operation to modify the cabinet form.", "intent": "Edit the cabinet geometry and inspect the resulting shape from multiple angles.", "app": "SketchUp 2024", "details": "The view changes from a top-down inspection to a wider kitchen view."}, {"start_s": 16111.173, "end_s": 16122.178, "action": "Zoomed and orbited back toward the cabinet front, selected the upper cabinet faces, and continued the geometry edit until the upper compartments appeared open and recessed.", "intent": "Refine the cabinet openings and verify the edited result.", "app": "SketchUp 2024", "details": "The final view shows the upper-left and upper-right cabinet compartments opened beside the refrigerator."}, {"start_s": 16122.178, "end_s": 16132.14, "action": "Adjusted the SketchUp view around the tall cabinet and refrigerator, clicked the cabinet geometry repeatedly, and orbited to a higher angle.", "intent": "Inspect and prepare the tall cabinet geometry for editing.", "app": "SketchUp 2024", "details": "The tall cabinet was selected and the camera view changed substantially."}, {"start_s": 16132.14, "end_s": 16142.172, "action": "Orbited and zoomed around the tall cabinet, selected its upper face, and used Push/Pull to modify the cabinet geometry while changing the viewing angle.", "intent": "Edit the cabinet\u2019s upper geometry and inspect the result.", "app": "SketchUp 2024", "details": "Push/Pull distance readouts were visible during the edit."}, {"start_s": 16142.172, "end_s": 16152.726, "action": "Selected and repeatedly edited the cabinet face with Push/Pull, then orbited and zoomed to review the cabinet beside the refrigerator.", "intent": "Refine the cabinet dimensions and check its alignment in the kitchen model.", "app": "SketchUp 2024", "details": "The view ended close to the cabinet\u2019s upper-right face with a distance readout."}, {"start_s": 16152.726, "end_s": 16163.447, "action": "Orbited and zoomed out from the close-up, then inspected the kitchen cabinetry and refrigerator from wider elevated angles.", "intent": "Review the edited cabinet within the overall kitchen layout.", "app": "SketchUp 2024", "details": "The full cabinet run, refrigerator, counters, and surrounding floor-plan lines became visible."}, {"start_s": 16163.447, "end_s": 16173.789, "action": "Continued orbiting and zooming around the kitchen, moving from a wide overview to a close view of the tall cabinet and refrigerator.", "intent": "Inspect the cabinet and adjacent appliance from multiple perspectives.", "app": "SketchUp 2024", "details": "The final view focused closely on the cabinet openings and refrigerator."}, {"start_s": 16173.789, "end_s": 16180.822, "action": "Zoomed into the upper cabinet openings, selected the left interior face, and applied a Push/Pull edit until the distance readout showed 18.00 mm.", "intent": "Adjust the depth of the cabinet\u2019s left interior shelf or face.", "app": "SketchUp 2024", "details": "The selected face displayed the message \u201cOffset limited to -18.00 mm.\u201d"}, {"start_s": 16180.822, "end_s": 16189.847, "action": "Activated Push/Pull on the selected upper-left cabinet shelf and entered a distance of 1.", "intent": "Adjust the shelf depth or position using a precise Push/Pull measurement.", "app": "SketchUp 2024", "details": "The selected shelf face remained visible with the Push/Pull distance field showing 1."}, {"start_s": 16189.847, "end_s": 16200.43, "action": "Entered and confirmed a -9 mm adjustment, then navigated the view and selected the shelf face again; the interface reported that the offset was limited to -18.00 mm.", "intent": "Refine the cabinet shelf geometry with a constrained offset.", "app": "SketchUp 2024", "details": "The Push/Pull tool remained active and the distance field later showed 0.00 mm."}, {"start_s": 16200.43, "end_s": 16209.764, "action": "Entered and confirmed 9 mm, clicked the upper-left cabinet face repeatedly, and orbited the view to inspect the resulting shelf geometry.", "intent": "Apply a 9 mm geometric adjustment and inspect the cabinet compartment.", "app": "SketchUp 2024", "details": "The selected shelf face was visible at 9.00 mm before the view changed to an angled inspection."}, {"start_s": 16209.764, "end_s": 16219.878, "action": "Clicked several cabinet faces, orbited around the model, and switched to the Orbit tool while inspecting the upper and lower compartments.", "intent": "Review the cabinet geometry from multiple viewpoints.", "app": "SketchUp 2024", "details": "The view changed from a close angled shelf view to a wider front view of the cabinet."}, {"start_s": 16219.878, "end_s": 16230.013, "action": "Continued selecting and orbiting around the cabinet compartments, entered a space character, scrolled through the view, and clicked the upper cabinet area.", "intent": "Navigate and inspect different cabinet faces and compartments.", "app": "SketchUp 2024", "details": "The camera moved upward to show the upper pair of compartments, then the selection tool became active."}, {"start_s": 16230.013, "end_s": 16240.285, "action": "Scrolled and clicked repeatedly along the cabinet\u2019s horizontal and vertical framing lines, leaving the intersecting edges highlighted in blue.", "intent": "Select or inspect cabinet frame geometry.", "app": "SketchUp 2024", "details": "The final view closely framed the central divider and horizontal rail with blue selection highlighting."}, {"start_s": 16240.285, "end_s": 16250.983, "action": "Clicked twice in the SketchUp model near the kitchen cabinetry, then produced a single key event with no visible text or model change.", "intent": "Interact with the model viewport.", "app": "SketchUp 2024", "details": null}, {"start_s": 16250.983, "end_s": 16263.493, "action": "Scrolled to change the camera view from a close kitchen elevation to a wider perspective, then clicked twice near the upper-right cabinetry area.", "intent": "Adjust and inspect the kitchen model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 16263.493, "end_s": 16273.349, "action": "Scrolled and repeatedly middle-clicked while navigating the camera, progressively zooming out from the kitchen to a distant view that included surrounding floor-plan outlines.", "intent": "Orbit or zoom out to inspect the model in context.", "app": "SketchUp 2024", "details": null}, {"start_s": 16273.349, "end_s": 16286.839, "action": "Scrolled to bring the kitchen back into a closer perspective view, then middle-clicked near the right-side cabinetry.", "intent": "Refine the camera view of the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 16286.839, "end_s": 16298.75, "action": "Middle-clicked and scrolled to zoom toward the kitchen, ending on a clear perspective of the L-shaped cabinets, window, backsplash, and refrigerator; middle-clicked once more near the right side.", "intent": "Inspect the kitchen layout and cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 16298.75, "end_s": 16309.624, "action": "Middle-clicked and scrolled to zoom back out, leaving the complete kitchen assembly and nearby floor-plan outlines visible.", "intent": "Review the kitchen model from a wider perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 16309.624, "end_s": 16317.43, "action": "Orbit and zoom around the SketchUp kitchen model, moving from a wider view to a close-up of the cabinets, shelving, and refrigerator.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 16317.43, "end_s": 16327.478, "action": "Open and dismiss the Edit menu, then orbit and zoom out to show more of the kitchen model and surrounding floor-plan drawings.", "intent": "Adjust the model view and inspect the broader layout.", "app": "SketchUp 2024", "details": "The Edit menu briefly displayed options including Undo, Select All, Hide, and Unhide."}, {"start_s": 16327.478, "end_s": 16340.293, "action": "Orbit and zoom into the upper cabinet and open shelving beside the refrigerator, then activate a drawing tool and begin positioning a rectangle at an endpoint in the group.", "intent": "Create or modify geometry on the cabinet assembly.", "app": "SketchUp 2024", "details": "The viewport showed an 'Endpoint in Group' inference and an active rectangle-drawing operation."}, {"start_s": 16340.293, "end_s": 16350.104, "action": "Continue the close-up drawing operation on the shelving, dragging to define a rectangular face and repositioning the view around the cabinet openings.", "intent": "Add or adjust a cabinet-related rectangular face.", "app": "SketchUp 2024", "details": "The Dimensions field showed changing millimeter measurements during the drawing operation."}, {"start_s": 16350.104, "end_s": 16360.511, "action": "Orbit and zoom back to the kitchen, select the upper cabinet face beside the refrigerator, and use context interaction before leaving the face selected.", "intent": "Select and inspect the cabinet component for further editing.", "app": "SketchUp 2024", "details": "The selected cabinet face was outlined in blue; a right-click interaction occurred before the view was hidden or changed."}, {"start_s": 16360.511, "end_s": 16370.454, "action": "Select the upper cabinet face, type a dimension value of 18 mm and confirm it, then activate Push/Pull and begin pulling the selected face.", "intent": "Modify the cabinet face geometry by a specified distance.", "app": "SketchUp 2024", "details": "The Push/Pull tool was active at the end, with the selected face highlighted and the Distance field showing 1."}, {"start_s": 16370.454, "end_s": 16380.319, "action": "Navigated around the SketchUp kitchen model by orbiting and zooming, moving from a wider view to a close-up of the upper cabinets and refrigerator.", "intent": "Inspect the kitchen cabinet layout from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 16380.319, "end_s": 16390.133, "action": "Zoomed and orbited around the cabinet and refrigerator area, then activated a copy/move operation and selected a large cabinet panel.", "intent": "Position or duplicate a cabinet component in the kitchen model.", "app": "SketchUp 2024", "details": "The status bar showed a copy/move operation and a selected cabinet panel."}, {"start_s": 16390.133, "end_s": 16400.357, "action": "Continued orbiting and zooming to review the kitchen model from wider and elevated angles, then adjusted the view around the cabinet and refrigerator section.", "intent": "Review the overall kitchen arrangement and component placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 16400.357, "end_s": 16411.085, "action": "Zoomed toward the upper cabinets and tall cabinet beside the refrigerator, then began drawing or editing a rectangular cabinet element on the tall unit.", "intent": "Create or modify a cabinet face or panel in the kitchen model.", "app": "SketchUp 2024", "details": "The final view showed an active rectangular drawing operation with dimension feedback."}, {"start_s": 16411.085, "end_s": 16421.359, "action": "Scrolled and zoomed down across the tall cabinet and lower cabinetry, then began another drawing operation near the base cabinet while changing the viewpoint.", "intent": "Continue modeling or adjusting lower cabinet geometry.", "app": "SketchUp 2024", "details": "The drawing tool remained active near the lower cabinet area."}, {"start_s": 16421.359, "end_s": 16432.927, "action": "Selected the tall narrow cabinet panel, switched tools, and entered the dimension value 18mm followed by Enter; left the resulting panel selected.", "intent": "Set or adjust the thickness or size of the selected cabinet panel.", "app": "SketchUp 2024", "details": "The selected narrow panel remained highlighted in the final view."}, {"start_s": 16432.927, "end_s": 16443.351, "action": "Clicked and scrolled through the SketchUp kitchen model, briefly typing \u201cm\u201d; moved the view in close to the cabinetry and refrigerator area.", "intent": "Navigate and inspect the kitchen model from a closer viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 16443.351, "end_s": 16450.686, "action": "Scrolled and clicked around the kitchen cabinetry, then changed the camera to a much wider view of the modeled room and surrounding floor plans.", "intent": "Adjust the model viewpoint to inspect the overall kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 16450.686, "end_s": 16463.352, "action": "Scrolled to zoom farther out, revealing the kitchen model, surrounding plan outlines, and placed reference figures and objects.", "intent": "Review the model in its broader scene context.", "app": "SketchUp 2024", "details": null}, {"start_s": 16463.352, "end_s": 16483.352, "action": "Orbited and zoomed the SketchUp scene, moving from a distant overview back toward a clearer frontal view of the kitchen; hid the application near the end of the span.", "intent": "Inspect the kitchen design from multiple overall angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 16483.352, "end_s": 16495.728, "action": "Paused briefly, then scrolled to zoom out from the frontal kitchen view and reveal more surrounding plan drawings and loose model components.", "intent": "Expand the scene view for an overall review.", "app": "SketchUp 2024", "details": null}, {"start_s": 16495.728, "end_s": 16503.824, "action": "Scrolled and orbited the scene farther outward, leaving the kitchen model smaller in view alongside surrounding floor plans, loose objects, and a human figure.", "intent": "Review the complete modeled scene and its surrounding elements.", "app": "SketchUp 2024", "details": null}, {"start_s": 16503.824, "end_s": 16523.824, "action": "Remained idle while viewing the SketchUp kitchen model.", "intent": "Review the current 3D kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 16523.824, "end_s": 16538.722, "action": "Zoomed out and orbited the SketchUp scene, changing from a close kitchen view to a wider view that included the model and surrounding floor plans.", "intent": "Inspect the overall model context and layout.", "app": "SketchUp 2024", "details": "Middle-mouse navigation gestures changed the camera view."}, {"start_s": 16538.722, "end_s": 16550.594, "action": "Orbited and zoomed toward the opposite side of the kitchen, bringing the upper cabinets, tall storage units, and refrigerator into closer view.", "intent": "Inspect the kitchen cabinetry and appliances from another angle.", "app": "SketchUp 2024", "details": "Used middle-mouse navigation to rotate and zoom the model."}, {"start_s": 16550.594, "end_s": 16563.762, "action": "Zoomed in on the upper cabinets and backsplash, then pulled back to show the cabinet run, window, counter, and refrigerator together.", "intent": "Review the upper cabinetry and surrounding kitchen features.", "app": "SketchUp 2024", "details": "Camera navigation continued with scroll and middle-mouse gestures."}, {"start_s": 16563.762, "end_s": 16576.947, "action": "Zoomed very close to the upper cabinet doors and handles, then shifted the view across the cabinet fronts.", "intent": "Examine cabinet door and hardware details.", "app": "SketchUp 2024", "details": "The view ended in a close-up of multiple upper cabinet doors."}, {"start_s": 16576.947, "end_s": 16586.563, "action": "Continued navigating around the cabinet close-up, selected the left cabinet door, and returned focus to the SketchUp window.", "intent": "Inspect and select an upper cabinet component.", "app": "SketchUp 2024", "details": "The selected cabinet face was outlined in blue; the SketchUp application became active at the end."}, {"start_s": 16586.563, "end_s": 16594.921, "action": "Opened the Joint configuration dialog, reviewed the hinge joint settings, clicked the joint controls, and closed the dialog.", "intent": "Configure or inspect the cabinet door joint.", "app": "SketchUp 2024", "details": "The dialog showed Joint type set to hinge, joint-axis selection, Open and Close position buttons, and an animation-time field."}, {"start_s": 16594.921, "end_s": 16614.921, "action": "Closed the configuration dialog and clicked the cabinet door, leaving the left door opened in the model.", "intent": "Test the configured cabinet-door joint.", "app": "SketchUp 2024", "details": "The left upper cabinet door changed from closed to open."}, {"start_s": 16614.921, "end_s": 16625.124, "action": "Pressed Escape and Undo while navigating the model view, then scrolled to zoom out and review the cabinet assembly.", "intent": "Review the cabinet configuration from a wider view.", "app": "SketchUp 2024", "details": "The view widened to show the upper cabinets and surrounding kitchen layout."}, {"start_s": 16625.124, "end_s": 16640.726, "action": "Continued reviewing the cabinet model and pressed Space, leaving the view focused on the upper cabinet doors.", "intent": "Inspect the cabinet geometry and door arrangement.", "app": "SketchUp 2024", "details": "The view remained centered on the upper cabinets and countertop."}, {"start_s": 16640.726, "end_s": 16646.517, "action": "Pressed Escape, orbited the model with middle-mouse clicks, and scrolled extensively to zoom out to an overall kitchen view.", "intent": "Examine the kitchen model from an overall perspective.", "app": "SketchUp 2024", "details": "The camera moved from a close cabinet view to a wide perspective showing the kitchen and surrounding floor-plan outlines."}, {"start_s": 16646.517, "end_s": 16660.301, "action": "Scrolled to zoom in slightly on the overall kitchen model.", "intent": "Refine the overview for inspection.", "app": "SketchUp 2024", "details": "The final view showed the L-shaped kitchen, upper cabinets, window, refrigerator, and surrounding plan outlines."}, {"start_s": 16660.301, "end_s": 16680.301, "action": "Clicked in the SketchUp model and adjusted the 3D view, then scrolled to zoom out and reveal more of the kitchen layout and surrounding floor-plan geometry.", "intent": "Inspect the kitchen model from a wider perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 16680.301, "end_s": 16693.731, "action": "Scrolled to further adjust the model view and left the kitchen shown from a wider angle; a Windows Explorer window was resized or repositioned without becoming visibly active.", "intent": "Continue viewing the model while adjusting the workspace.", "app": "SketchUp 2024", "details": "The kitchen model remained centered in the SketchUp viewport."}, {"start_s": 16693.731, "end_s": 16698.732, "action": "Resized or repositioned a Windows Explorer window while the SketchUp kitchen view remained unchanged.", "intent": "Adjust the desktop workspace without modifying the model.", "app": "SketchUp 2024", "details": "No visible model change occurred."}, {"start_s": 16698.732, "end_s": 16718.732, "action": "Remained idle while viewing the unchanged SketchUp kitchen model.", "intent": "Review the current 3D model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 16718.732, "end_s": 16730.705, "action": "Scrolled repeatedly to zoom farther out, reducing the kitchen model and exposing additional surrounding floor-plan outlines in the SketchUp workspace.", "intent": "Survey the kitchen placement relative to the broader layout.", "app": "SketchUp 2024", "details": "System status changes and resume events occurred during the interval."}, {"start_s": 16730.705, "end_s": 16740.656, "action": "Clicked and scrolled in the viewport to orbit and adjust the camera, changing from a distant overview to a closer elevated view of the kitchen cabinets, counters, window, and refrigerator.", "intent": "Inspect the kitchen model from multiple angles and a closer perspective.", "app": "SketchUp 2024", "details": "The viewport ended on a close-up angled view of the kitchen."}, {"start_s": 16740.656, "end_s": 16751.719, "action": "Navigated and zoomed around the kitchen cabinet model, selected a cabinet handle, typed \u201cm,\u201d and continued positioning the selected component near the upper cabinets.", "intent": "Adjust or place a cabinet-hardware component in the 3D model.", "app": "SketchUp 2024", "details": "The selected handle remained highlighted while the camera moved from a wider kitchen view to a close-up."}, {"start_s": 16751.719, "end_s": 16758.338, "action": "Adjusted the camera around the upper cabinets and refrigerator, then moved the selected handle across the cabinet face toward the right-side cabinet.", "intent": "Position the selected cabinet handle on the cabinet model.", "app": "SketchUp 2024", "details": "The Move tool status indicated placement or copying, with a visible inference line from the selected handle."}, {"start_s": 16758.338, "end_s": 16770.631, "action": "Paused on a close-up of the upper cabinets and refrigerator area, then clicked the selected handle twice to continue its placement.", "intent": "Refine the location of the cabinet handle.", "app": "SketchUp 2024", "details": "The handle remained selected on the upper-left door of the refrigerator-side cabinet."}, {"start_s": 16770.631, "end_s": 16780.209, "action": "Zoomed and orbited outward from the cabinet close-up toward the refrigerator, keeping the handle component selected.", "intent": "Inspect the handle placement in the surrounding kitchen model.", "app": "SketchUp 2024", "details": "The view progressed from the cabinet fronts to a close view of the refrigerator; no new object was visibly created."}, {"start_s": 16780.209, "end_s": 16790.385, "action": "Brought SketchUp back into view, zoomed around the refrigerator and adjacent cabinets, and clicked to reposition or inspect the selected handle.", "intent": "Continue adjusting or reviewing cabinet hardware placement.", "app": "SketchUp 2024", "details": "The application was briefly unhidden and later hidden; the handle remained highlighted in the model."}, {"start_s": 16790.385, "end_s": 16804.793, "action": "Continued navigating and zooming around the upper cabinet and refrigerator area, then clicked near the selected handle after a brief space-bar input.", "intent": "Inspect or finalize the selected handle\u2019s placement on the cabinet door.", "app": "SketchUp 2024", "details": "The handle stayed selected, with an \u201cOn Edge in Group\u201d inference tooltip visible near the end."}, {"start_s": 16804.793, "end_s": 16814.586, "action": "Scrolled and clicked the selected vertical cabinet handle, then typed \u201cm\u201d and clicked again while the Move tool remained active.", "intent": "Position or adjust the selected cabinet handle.", "app": "SketchUp 2024", "details": "A vertical handle on the upper cabinet door remained selected."}, {"start_s": 16814.586, "end_s": 16824.031, "action": "Clicked the adjacent cabinet handle and scrolled to zoom in, leaving the handle selected in Move mode.", "intent": "Prepare to position the adjacent cabinet handle.", "app": "SketchUp 2024", "details": "The view zoomed closer to two vertical handles on neighboring cabinet doors."}, {"start_s": 16824.031, "end_s": 16835.041, "action": "Scrolled and orbited around the kitchen cabinet model, changing from a close-up to a wider elevated view.", "intent": "Inspect the cabinet layout and handle placement.", "app": "SketchUp 2024", "details": "The model view widened to show the cabinet run, backsplash, refrigerator, and surrounding geometry."}, {"start_s": 16835.041, "end_s": 16846.464, "action": "Clicked and selected a cabinet handle, typed \u201cm,\u201d then zoomed in and clicked again on the handle end.", "intent": "Adjust the selected handle component.", "app": "SketchUp 2024", "details": "The selected handle was shown in close-up with a bounding box and Move tool controls."}, {"start_s": 16846.464, "end_s": 16856.312, "action": "Scrolled extensively and resized or moved the window while orbiting to a wider perspective, then clicked in the cabinet scene.", "intent": "Reframe the model for inspection or placement.", "app": "SketchUp 2024", "details": "The view changed to a broad perspective of the kitchen cabinetry and refrigerator."}, {"start_s": 16856.312, "end_s": 16870.28, "action": "Orbited and scrolled to a front-facing view of the kitchen, then clicked the lower cabinet door handle area.", "intent": "Inspect or position the lower handle on the tall cabinet.", "app": "SketchUp 2024", "details": "The final view showed the cabinet wall, refrigerator, and a handle targeted on the tall lower door."}, {"start_s": 16870.28, "end_s": 16883.914, "action": "Scrolled slightly around the SketchUp kitchen model, then entered a space; the view remained on the cabinetry and refrigerator.", "intent": "Inspect the kitchen model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 16883.914, "end_s": 16890.92, "action": "Zoomed in repeatedly on the refrigerator door area and its blue-highlighted vertical handle.", "intent": "Examine the refrigerator handle component.", "app": "SketchUp 2024", "details": null}, {"start_s": 16890.92, "end_s": 16899.32, "action": "Scrolled around the close-up handle and typed \u201cm\u201d; the handle became selected with move-tool grips visible.", "intent": "Prepare the handle component for movement.", "app": "SketchUp 2024", "details": null}, {"start_s": 16899.32, "end_s": 16910.465, "action": "Clicked the selected handle and moved a copy to the right along the green axis, leaving the original and copied handle visible side by side.", "intent": "Duplicate and reposition the refrigerator handle.", "app": "SketchUp 2024", "details": "SketchUp displayed the move/copy operation and a distance readout."}, {"start_s": 16910.465, "end_s": 16917.888, "action": "Resized a Windows Explorer window and continued the active move/copy operation while zooming or scrolling back to the wider kitchen view; the copied handle remained aligned on the green axis.", "intent": "Continue positioning the copied handle on the refrigerator model.", "app": "SketchUp 2024", "details": "The status bar indicated that the item was being copied or a distance entered."}, {"start_s": 16917.888, "end_s": 16924.928, "action": "Scrolled to a closer view of the refrigerator and adjacent drawers while keeping the copied handle active and aligned on the green axis.", "intent": "Refine or inspect the copied handle placement.", "app": "SketchUp 2024", "details": "The move/copy operation remained active with a distance readout."}, {"start_s": 16924.928, "end_s": 16934.663, "action": "Navigated around the kitchen cabinet and refrigerator model by scrolling and middle-clicking, changing from a close-up of the cabinet handle area to a wider kitchen view.", "intent": "Inspect the modeled kitchen assembly from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 16934.663, "end_s": 16943.887, "action": "Zoomed and navigated into the cabinet doors, selected a vertical handle, and activated the Move tool so the handle remained pre-selected for adjustment.", "intent": "Prepare a cabinet handle component for repositioning.", "app": "SketchUp 2024", "details": "The selected handle is outlined in blue and the Move tool status is visible."}, {"start_s": 16943.887, "end_s": 16951.257, "action": "Scrolled and middle-clicked to orbit and zoom out from the cabinet handle, viewing the kitchen model from below and then from a wider front perspective while keeping the move operation active.", "intent": "Reposition or inspect the selected cabinet handle in the overall model context.", "app": "SketchUp 2024", "details": "The status bar indicates the selected item is ready to be placed or moved."}, {"start_s": 16951.257, "end_s": 16961.488, "action": "Paused on a close-up of the tall cabinet and selected handle, then clicked to continue the active Move operation and changed the handle's displayed distance.", "intent": "Adjust the selected cabinet handle's placement.", "app": "SketchUp 2024", "details": "The handle remains blue-selected and the distance readout changes from about 903.78 mm to 947.59 mm."}, {"start_s": 16961.488, "end_s": 16969.71, "action": "Scrolled and middle-clicked to inspect the selected handle closely, then clicked near its lower end while the Move tool remained active.", "intent": "Continue fine positioning of the cabinet handle.", "app": "SketchUp 2024", "details": "The selected handle stays outlined in blue beside another unselected handle."}, {"start_s": 16969.71, "end_s": 16978.974, "action": "Continued the active Move operation on the selected handle, briefly resized or moved a Windows Explorer window, and clicked to set another position in the model.", "intent": "Continue placing the selected cabinet handle.", "app": "SketchUp 2024", "details": "The SketchUp status bar shows the item is still being moved, with a changing distance readout."}, {"start_s": 16978.974, "end_s": 16986.929, "action": "Navigated around the SketchUp kitchen model with repeated scroll and middle-click orbit/pan inputs, changing from a low front view to an elevated angled view of the cabinetry and refrigerator.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 16986.929, "end_s": 16997.225, "action": "Zoomed or orbited farther out from the kitchen model, leaving it smaller in the scene with surrounding floor-plan linework visible.", "intent": "Review the kitchen layout in relation to the surrounding plan.", "app": "SketchUp 2024", "details": null}, {"start_s": 16997.225, "end_s": 17003.6, "action": "Orbited and zoomed around the kitchen, briefly moving to a rear-side view before returning to a closer elevated view of the cabinets, counters, window, and refrigerator.", "intent": "Examine the modeled kitchen from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 17003.6, "end_s": 17019.417, "action": "Paused on the elevated kitchen view, then made a few scroll inputs that adjusted the view slightly farther out while keeping the full cabinet run and surrounding floor plan visible.", "intent": "Continue reviewing the overall model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 17019.417, "end_s": 17026.494, "action": "Orbited and adjusted the camera around the kitchen, ending on a stable elevated three-quarter view with the full L-shaped cabinetry, refrigerator, window, and nearby floor-plan outlines visible.", "intent": "Set and inspect a clear overview of the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 17026.494, "end_s": 17038.918, "action": "Remained on the same SketchUp overview with no modeling interaction; near the end, a Windows Explorer window resize event was recorded without a visible change to the SketchUp canvas.", "intent": "Wait while retaining the current model view.", "app": "SketchUp 2024", "details": "A Windows Explorer resize event occurred at 17038.42s, but the supplied screenshot still shows SketchUp."}, {"start_s": 17038.918, "end_s": 17048.814, "action": "Scrolled and clicked in the SketchUp model, then typed a character and activated a drawing tool, leaving a line endpoint and length readout visible near the kitchen layout.", "intent": "Continue editing or measuring geometry in the kitchen model.", "app": "SketchUp 2024", "details": "The view remained focused on the kitchen cabinetry and surrounding floor-plan outlines."}, {"start_s": 17048.814, "end_s": 17058.592, "action": "Navigated the model with middle-clicks and repeated scrolling, zooming out to show the kitchen model alongside several floor-plan outlines.", "intent": "Adjust the 3D view to inspect the model in its broader layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 17058.592, "end_s": 17068.192, "action": "Orbited the model with middle-clicks and scrolling, changing from an overhead view to a close, low-angle view of the cabinets, window, and tall unit.", "intent": "Inspect the kitchen geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The SketchUp status bar showed the orbit tool active."}, {"start_s": 17068.192, "end_s": 17079.013, "action": "Typed a character, clicked the model, and scrolled while orbiting or zooming underneath the kitchen; began a rectangle operation and left a large rectangle preview with dimension values visible.", "intent": "Create or size additional geometry around the kitchen model.", "app": "SketchUp 2024", "details": "The view ended beneath the model with the rectangle tool awaiting the opposite corner."}, {"start_s": 17079.013, "end_s": 17088.583, "action": "Scrolled and orbited back toward the kitchen, then clicked the underside geometry and selected a large floor or base face, which became highlighted.", "intent": "Inspect or select the kitchen base geometry.", "app": "SketchUp 2024", "details": "The selected underside face was visibly highlighted with a dotted pattern."}, {"start_s": 17088.583, "end_s": 17097.888, "action": "Right-clicked the selected face to open the context menu, dismissed it, and clicked the geometry repeatedly, leaving the underside group or face selected with a bounding box; typed characters during the selection.", "intent": "Access editing commands and refine the selection of the underside geometry.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Make Component, and plugin commands."}, {"start_s": 17097.888, "end_s": 17110.375, "action": "Adjusted the SketchUp camera by orbiting and zooming out, revealing the modeled kitchen cabinet and appliance layout along with nearby floor-plan outlines.", "intent": "Review the overall 3D kitchen model and surrounding layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 17110.375, "end_s": 17120.816, "action": "Orbited and zoomed the camera toward the kitchen, moving from a wide view to a closer inspection of the cabinets, drawers, countertop, window, and refrigerator.", "intent": "Inspect the kitchen cabinetry and appliance arrangement from closer angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 17120.816, "end_s": 17130.849, "action": "Continued orbiting and zooming around the model, then moved into a close-up of the floor area and two outlined floor fixtures near the kitchen edge.", "intent": "Examine the kitchen floor layout and nearby fixture geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 17130.849, "end_s": 17139.863, "action": "Typed a character, clicked in the model, and used the eraser tool while zooming far out to view the kitchen as a small isolated model in the larger workspace.", "intent": "Change the active tool and review the model in the broader SketchUp scene.", "app": "SketchUp 2024", "details": "The eraser tool was active near the end of the span."}, {"start_s": 17139.863, "end_s": 17145.151, "action": "Orbiting and zooming brought the camera back toward the kitchen, ending on a clearer three-quarter view of the cabinets, window, countertop, and refrigerator.", "intent": "Reframe the kitchen model for an overall visual check.", "app": "SketchUp 2024", "details": null}, {"start_s": 17145.151, "end_s": 17165.151, "action": "Remained idle on a three-quarter SketchUp view of the completed kitchen model.", "intent": "Pause while reviewing the displayed model.", "app": "SketchUp 2024", "details": null}, {"start_s": 17165.151, "end_s": 17176.774, "action": "Adjusted the SketchUp camera with middle-button clicks, scrolling, and a brief spacebar input to inspect the kitchen model from a closer front-right view.", "intent": "Inspect the modeled kitchen layout and appliances.", "app": "SketchUp 2024", "details": null}, {"start_s": 17176.774, "end_s": 17184.849, "action": "Orbited and zoomed the SketchUp view repeatedly, moving from a close kitchen view to a wider perspective that included the surrounding loose components and figure.", "intent": "Review the overall scene and model placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 17184.849, "end_s": 17194.784, "action": "Scrolled and orbited around the model, alternating between wider and closer views of the kitchen cabinets, window, countertop, and refrigerator.", "intent": "Inspect the kitchen assembly from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 17194.784, "end_s": 17199.809, "action": "Zoomed and orbited toward the loose kitchen components, bringing the sink, dish racks, cooktops, and hood into a close view while keeping part of the cabinet model visible.", "intent": "Examine the separate kitchen fixture components.", "app": "SketchUp 2024", "details": null}, {"start_s": 17199.809, "end_s": 17219.479, "action": "Scrolled extensively to navigate between close and wide views of the loose fixtures and the main kitchen model, ending with both grouped areas visible in the scene.", "intent": "Review the relationship between the loose components and the kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 17219.479, "end_s": 17231.165, "action": "Activated the component-placement tool, navigated to the loose oven component, and clicked it so the oven became selected and ready to move.", "intent": "Prepare the oven component for placement in the kitchen model.", "app": "SketchUp 2024", "details": "The oven is outlined in blue in the final view, indicating it is selected for movement."}, {"start_s": 17231.165, "end_s": 17241.088, "action": "Clicked and scrolled around the selected oven model, zooming from the wider kitchen scene to a close view of the oven and nearby knife rack.", "intent": "Inspect the oven model and its surrounding components.", "app": "SketchUp 2024", "details": "The oven remained selected with blue outlines."}, {"start_s": 17241.088, "end_s": 17252.895, "action": "Scrolled repeatedly to move closer to the oven controls and door, ending on a close-up of the display, knobs, handle, and glass door.", "intent": "Examine the oven\u2019s front details.", "app": "SketchUp 2024", "details": "A tooltip identifying a face on the oven appeared during the close inspection."}, {"start_s": 17252.895, "end_s": 17261.558, "action": "Scrolled and adjusted the view across the oven control panel, then clicked and pulled back to show the complete oven from an elevated angle.", "intent": "Review the oven model from close and wider viewpoints.", "app": "SketchUp 2024", "details": "The oven stayed selected throughout the view changes."}, {"start_s": 17261.558, "end_s": 17272.262, "action": "Clicked and scrolled around the oven door and handle, inspected the front surface closely, then pulled back to the wider kitchen scene with the oven selected.", "intent": "Inspect the oven door components and overall placement.", "app": "SketchUp 2024", "details": "The final view showed the oven isolated among the other kitchen objects."}, {"start_s": 17272.262, "end_s": 17280.624, "action": "Clicked and scrolled to reframe the oven and knife rack, briefly pressed the space key, clicked near the oven, and zoomed out to show the surrounding kitchen layout.", "intent": "Reposition the camera and review the oven\u2019s placement in the kitchen model.", "app": "SketchUp 2024", "details": "The selection outline was no longer visible in the later wide view."}, {"start_s": 17280.624, "end_s": 17290.422, "action": "Scrolled farther out and clicked around the scene, ending with a distant overview of the kitchen cabinetry and the separate appliance and accessory models.", "intent": "Review the overall kitchen arrangement.", "app": "SketchUp 2024", "details": "The final view showed the full kitchen corner and loose countertop objects."}, {"start_s": 17290.422, "end_s": 17306.048, "action": "Scrolled through the SketchUp scene, adjusting the view to show the kitchen layout and separated appliance components.", "intent": "Review the model from a different zoom or view.", "app": "SketchUp 2024", "details": null}, {"start_s": 17306.048, "end_s": 17317.175, "action": "Clicked the freestanding oven to select it, then activated the Rotate tool around the appliance.", "intent": "Prepare the oven component for rotation.", "app": "SketchUp 2024", "details": "The oven was highlighted with a blue selection outline and rotation gizmo."}, {"start_s": 17317.175, "end_s": 17326.284, "action": "Clicked around the selected oven and rotated it, briefly canceling and restarting the rotation operation.", "intent": "Adjust the oven's orientation in the model.", "app": "SketchUp 2024", "details": "The oven visibly changed orientation during the rotation operation."}, {"start_s": 17326.284, "end_s": 17337.932, "action": "Continued rotating the selected oven and entered 90 followed by Enter to apply a precise rotation.", "intent": "Set the oven to a specific orientation.", "app": "SketchUp 2024", "details": "The oven ended in a sideways orientation with the rotation tool still visible."}, {"start_s": 17337.932, "end_s": 17347.836, "action": "Orbited and zoomed the camera around the kitchen and oven, moving from a wider view to a close-up inspection.", "intent": "Inspect the rotated oven relative to the kitchen cabinetry.", "app": "SketchUp 2024", "details": "The view changed substantially while the oven remained selected."}, {"start_s": 17347.836, "end_s": 17359.444, "action": "Activated Move, selected the oven, and dragged it while orbiting or zooming the view.", "intent": "Reposition the oven in the kitchen model.", "app": "SketchUp 2024", "details": "The oven remained outlined in blue and the move distance field showed an active placement operation."}, {"start_s": 17359.444, "end_s": 17367.587, "action": "Adjusted the selected oven component with the active Move tool, repositioning it within the lower kitchen cabinet run.", "intent": "Position the oven in the kitchen layout.", "app": "SketchUp 2024", "details": "Selected oven remained outlined in blue; the distance readout changed during placement."}, {"start_s": 17367.587, "end_s": 17377.586, "action": "Continued moving the selected oven, then clicked to place it flush in the cabinet opening and ended the move operation.", "intent": "Finalize the oven placement beside the drawers.", "app": "SketchUp 2024", "details": "The oven became unselected and appeared aligned in the lower cabinet run."}, {"start_s": 17377.586, "end_s": 17387.5, "action": "Navigated the 3D kitchen view with orbit/zoom gestures, moving from the close oven area to a wider kitchen view and back toward the appliance.", "intent": "Inspect the oven placement from different viewpoints.", "app": "SketchUp 2024", "details": "The full cabinet wall, refrigerator, counters, and oven were shown; the oven was selected again near the end."}, {"start_s": 17387.5, "end_s": 17397.25, "action": "Orbited and zoomed toward the oven, then typed a character while the selected appliance remained in view.", "intent": "Inspect the oven model closely.", "app": "SketchUp 2024", "details": "The camera moved to a close-up of the oven controls and door; the display visibly showed 1:30."}, {"start_s": 17397.25, "end_s": 17406.891, "action": "Continued orbiting and zooming around the kitchen model, briefly moving to an exterior/back view before returning to the cabinet wall and oven.", "intent": "Review the overall kitchen model and oven placement.", "app": "SketchUp 2024", "details": "The oven remained highlighted when the view returned to the front kitchen elevation."}, {"start_s": 17406.891, "end_s": 17416.163, "action": "Adjusted the view around the oven and typed characters, then activated the Scale tool on the selected oven component.", "intent": "Prepare to resize or modify the oven component.", "app": "SketchUp 2024", "details": "The oven ended selected with green scale handles visible."}, {"start_s": 17416.163, "end_s": 17426.299, "action": "Scrolled and adjusted the SketchUp view, then dragged to scale the selected oven assembly and returned to a wider kitchen view.", "intent": "Resize and inspect the oven component within the kitchen model.", "app": "SketchUp 2024", "details": "The oven was selected with the Scale tool; the visible scale readout ended at 1.14."}, {"start_s": 17426.299, "end_s": 17435.38, "action": "Navigated closer around the kitchen corner, selected the oven assembly, and zoomed in for inspection.", "intent": "Inspect the oven placement and geometry in the cabinet layout.", "app": "SketchUp 2024", "details": "The oven assembly was outlined in blue in the final view."}, {"start_s": 17435.38, "end_s": 17445.65, "action": "Selected and moved the oven assembly, then orbited the view to inspect its position from a slightly different angle.", "intent": "Adjust the oven component's placement relative to the surrounding cabinets.", "app": "SketchUp 2024", "details": "The Move tool showed the selected oven and a distance readout of 133.35 mm."}, {"start_s": 17445.65, "end_s": 17450.548, "action": "Navigated slightly, typed a tool shortcut, and selected the oven assembly to begin scaling it.", "intent": "Prepare another size adjustment of the oven component.", "app": "SketchUp 2024", "details": "The Scale tool was active and the final visible scale readout was 1.26."}, {"start_s": 17450.548, "end_s": 17466.78, "action": "Kept the oven selected and scrolled to zoom out, reducing the view from a close-up to a wider kitchen perspective.", "intent": "Review the oven's scale and placement within the broader kitchen layout.", "app": "SketchUp 2024", "details": "The selected oven remained highlighted; the scale readout changed to 1.39."}, {"start_s": 17466.78, "end_s": 17477.938, "action": "Scrolled and orbited around the kitchen, then selected the oven and adjusted its scale from a closer side view.", "intent": "Refine and inspect the oven component in relation to the adjacent drawers and cabinets.", "app": "SketchUp 2024", "details": "The final close-up showed green Scale handles around the selected oven and a scale readout of 1.22."}, {"start_s": 17477.938, "end_s": 17489.218, "action": "Navigated around the kitchen model with repeated middle-button scrolling and clicks, moving from a full cabinet view to a close-up of the oven and adjacent drawers.", "intent": "Inspect the oven cabinet area from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 17489.218, "end_s": 17499.061, "action": "Selected the oven assembly, entered Move mode, typed a distance value, and repositioned the selected oven cabinet relative to the surrounding drawers and countertop.", "intent": "Adjust the oven cabinet placement in the kitchen model.", "app": "SketchUp 2024", "details": "The oven assembly remained highlighted in blue after the move operation."}, {"start_s": 17499.061, "end_s": 17510.122, "action": "Entered Scale mode on the oven assembly, typed a scale-related key, and adjusted the selection so the oven cabinet became slightly resized.", "intent": "Resize the oven assembly to fit the cabinet layout.", "app": "SketchUp 2024", "details": "The selected oven showed scale handles and a scale readout of approximately 1.12."}, {"start_s": 17510.122, "end_s": 17520.276, "action": "Scaled the oven assembly again while changing the camera view, then zoomed and orbited out to review its fit within the wider kitchen cabinet run.", "intent": "Refine and visually review the oven cabinet dimensions and placement.", "app": "SketchUp 2024", "details": "The oven remained selected during scaling, then the final view showed it aligned between the left cabinets and right drawers."}, {"start_s": 17520.276, "end_s": 17530.276, "action": "Orbited and zoomed around the oven and drawer unit, inspecting the front and side alignment from close viewpoints.", "intent": "Inspect the adjusted oven assembly and surrounding cabinetry.", "app": "SketchUp 2024", "details": null}, {"start_s": 17530.276, "end_s": 17537.754, "action": "Selected the oven assembly, entered Scale mode, and adjusted its scale while viewing the front corner of the oven beside the drawers.", "intent": "Make a final dimensional adjustment to the oven assembly.", "app": "SketchUp 2024", "details": "The oven was highlighted with scale handles and a readout near 1.00, 0.97."}, {"start_s": 17537.754, "end_s": 17545.85, "action": "Adjusted the selected oven cabinet with the Scale tool, then clicked within the model while keeping the selection active.", "intent": "Resize and position the oven cabinet in the kitchen model.", "app": "SketchUp 2024", "details": "The oven cabinet remained highlighted with scale handles."}, {"start_s": 17545.85, "end_s": 17558.821, "action": "Scrolled extensively to navigate the 3D view, moving from a close oven view to a blank area and back to the kitchen scene.", "intent": "Reposition the camera while editing the selected oven cabinet.", "app": "SketchUp 2024", "details": "The selected oven cabinet stayed active during navigation."}, {"start_s": 17558.821, "end_s": 17569.124, "action": "Scrolled and clicked to orbit or navigate around the kitchen, then pressed Escape; the selected oven cabinet appeared smaller in the wider view.", "intent": "Inspect the oven cabinet's scale and placement in the kitchen.", "app": "SketchUp 2024", "details": "The cabinet was selected with scale handles visible."}, {"start_s": 17569.124, "end_s": 17579.026, "action": "Clicked and scrolled around the selected oven cabinet to inspect its lower and side edges, leaving the Scale tool active.", "intent": "Examine the cabinet boundaries and scale handles closely.", "app": "SketchUp 2024", "details": "The view ended on a close-up of the cabinet's lower-right corner."}, {"start_s": 17579.026, "end_s": 17589.702, "action": "Scrolled to the cabinet base, clicked and dragged around the lower-left area, and clicked repeatedly while the Scale tool displayed a prompt to select and move a grip.", "intent": "Attempt to manipulate a scale grip on the oven cabinet.", "app": "SketchUp 2024", "details": "No definite geometry change was visible; the scale prompt remained onscreen."}, {"start_s": 17589.702, "end_s": 17602.308, "action": "Entered keyboard input, navigated and clicked around the model, then switched to the Select tool and zoomed out to review the complete kitchen layout.", "intent": "Finish the cabinet edit and inspect the overall kitchen arrangement.", "app": "SketchUp 2024", "details": "The final view showed the full kitchen with the oven cabinet in place."}, {"start_s": 17602.308, "end_s": 17612.843, "action": "Selected the built-in oven and activated the Scale tool, then navigated around the model while leaving the oven highlighted with scale handles.", "intent": "Adjust or inspect the oven component in the kitchen model.", "app": "SketchUp", "details": "The oven became selected and displayed a yellow bounding box and scale grips."}, {"start_s": 17612.843, "end_s": 17622.515, "action": "Continued manipulating the selected oven with the Scale tool while zooming and orbiting outward to view more of the kitchen wall.", "intent": "Refine or inspect the oven's size and placement relative to surrounding cabinets.", "app": "SketchUp", "details": "The oven remained selected with green scale grips before the view widened."}, {"start_s": 17622.515, "end_s": 17632.146, "action": "Orbited and zoomed around the kitchen, moving from the oven and drawers to a broader front view that included the refrigerator and tall cabinets.", "intent": "Review the kitchen layout and appliance placement from different viewpoints.", "app": "SketchUp", "details": "The view changed to show the oven, drawer unit, tall pantry cabinets, and refrigerator."}, {"start_s": 17632.146, "end_s": 17641.885, "action": "Zoomed out to review the full kitchen corner, then zoomed back toward the oven and adjacent drawers.", "intent": "Inspect the overall kitchen composition and return to the oven area for closer review.", "app": "SketchUp", "details": "The camera alternated between a wide kitchen view and a close-up of the oven and drawers."}, {"start_s": 17641.885, "end_s": 17656.62, "action": "Zoomed and orbited through several views of the kitchen, ending on a broad elevated view; clicked the SketchUp toolbar area and switched to another SketchUp window state.", "intent": "Review the completed kitchen model and change the active SketchUp workspace or tool state.", "app": "SketchUp", "details": "The final view showed the L-shaped kitchen with cabinets, oven, refrigerator, and windows; the status bar briefly showed Manual cleaning."}, {"start_s": 17656.62, "end_s": 17663.488, "action": "Returned to the SketchUp model window and clicked toolbar controls, leaving the same elevated kitchen view visible.", "intent": "Continue working in the SketchUp model and select different modeling or display tools.", "app": "SketchUp", "details": "The status bar showed tool labels including Flowers and Microwave after the toolbar clicks."}, {"start_s": 17663.488, "end_s": 17667.87, "action": "Displayed the Click-Change warning dialog stating that one selection did not belong to Click-Change 2; clicked near the dialog's upper-right close area, leaving the warning visible.", "intent": "Handle the Click-Change replacement warning.", "app": "SketchUp", "details": "The kitchen model remained visible behind the modal dialog."}, {"start_s": 17667.87, "end_s": 17671.987, "action": "Activated the SketchUp window and clicked the Table toolbar control.", "intent": "Select a SketchUp modeling or component tool.", "app": "SketchUp", "details": "The warning dialog disappeared and the kitchen view remained unchanged."}, {"start_s": 17671.987, "end_s": 17678.509, "action": "Kept the warning dialog open, then clicked and dragged near its upper-right close area without dismissing it.", "intent": "Attempt to dismiss or interact with the Click-Change warning.", "app": "SketchUp", "details": "The dialog continued to state that one selection did not belong to Click-Change 2."}, {"start_s": 17678.509, "end_s": 17687.765, "action": "Zoomed and navigated the kitchen model, resized or moved a small Windows Explorer window, returned to SketchUp, and pressed Escape; the view changed from a close kitchen perspective to a wider model view.", "intent": "Adjust the model view and manage an overlapping window.", "app": "SketchUp", "details": "The wider view showed the kitchen assembly, loose components, and a standing figure."}, {"start_s": 17687.765, "end_s": 17697.452, "action": "Selected the Microwave component tool and scrolled repeatedly, changing the view from the full kitchen scene to a closer area containing a separate microwave and the kitchen cabinets.", "intent": "Browse or position a microwave component in the model.", "app": "SketchUp", "details": "The status bar identified the selected tool as Microwave; the application was briefly hidden before the view changed."}, {"start_s": 17697.452, "end_s": 17709.149, "action": "Pressed Space and scrolled repeatedly, then clicked the component tool and continued scrolling; the view moved across the empty workspace and ended with a separate cooktop component visible.", "intent": "Browse or position another kitchen component.", "app": "SketchUp", "details": "The status bar showed Place component, and the final view displayed a cooktop isolated in the workspace."}, {"start_s": 17709.149, "end_s": 17727.986, "action": "Resized and moved a Windows Explorer window while leaving the SketchUp kitchen model unchanged on screen.", "intent": "Manage the visible application window layout.", "app": "SketchUp 2024", "details": "The model view remained static; resize and move events referenced Windows Explorer."}, {"start_s": 17727.986, "end_s": 17738.261, "action": "Scrolled and used middle-click navigation to adjust the SketchUp camera, changing from a distant view to a broader view of the kitchen and loose components.", "intent": "Inspect the overall kitchen model and surrounding components.", "app": "SketchUp 2024", "details": "The view revealed the cabinetry, appliances, sink, dish rack, and other unplaced objects."}, {"start_s": 17738.261, "end_s": 17747.534, "action": "Scrolled extensively to zoom and navigate toward the loose appliances, ending on a closer view of the cooktop, pots, kettle, and sink.", "intent": "Inspect individual kitchen appliance components.", "app": "SketchUp 2024", "details": "No geometry edits were visible."}, {"start_s": 17747.534, "end_s": 17757.389, "action": "Clicked and navigated the SketchUp view, briefly showing selected or translucent model geometry, then adjusted the camera to include the kitchen, loose components, and human figure.", "intent": "Review the model scene and its component placement.", "app": "SketchUp 2024", "details": "Camera navigation changed the viewpoint; no confirmed object transformation was visible."}, {"start_s": 17757.389, "end_s": 17766.042, "action": "Used middle-click orbiting and scrolling to move from the wider kitchen scene into a close-up of the bottle rack and pink dish rack.", "intent": "Inspect the storage rack contents and nearby kitchen elements.", "app": "SketchUp 2024", "details": "The final view closely framed bottles, cans, and dishes in the rack."}, {"start_s": 17766.042, "end_s": 17777.899, "action": "Scrolled and orbited through the SketchUp scene, pulling back from the rack to a wide overview of the kitchen, loose components, and standing figure.", "intent": "Review the overall scene from a wider perspective.", "app": "SketchUp 2024", "details": "The final camera position showed the kitchen set at a small distance with surrounding components and the figure."}, {"start_s": 17777.899, "end_s": 17782.654, "action": "Orbited and zoomed the SketchUp camera toward the modeled kitchen, then adjusted the view around the cabinetry and appliances.", "intent": "Inspect the kitchen model from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 17782.654, "end_s": 17795.749, "action": "Zoomed in to review the kitchen corner, including the window, countertop, upper cabinets, oven, drawers, and refrigerator, then pulled back to a wider view.", "intent": "Review the modeled kitchen layout and components.", "app": "SketchUp 2024", "details": null}, {"start_s": 17795.749, "end_s": 17805.821, "action": "Orbited and zoomed the camera around the kitchen, briefly viewing the cabinetry and appliances from a front angle before pulling back to show the full room model.", "intent": "Examine the kitchen arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 17805.821, "end_s": 17815.546, "action": "Zoomed and orbited toward the lower cabinets and oven, then moved into a very close view of the wall and floor-base geometry; clicked repeatedly near the lower edge of the model.", "intent": "Inspect or select geometry near the kitchen base and wall.", "app": "SketchUp 2024", "details": null}, {"start_s": 17815.546, "end_s": 17825.003, "action": "Continued manipulating the camera around the model with zooming and orbiting, then selected or dragged within the kitchen scene to change the viewpoint and return to a wider rear-side view.", "intent": "Reposition the camera while inspecting the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 17825.003, "end_s": 17836.325, "action": "Orbited and zoomed the SketchUp camera, alternating between a wider room view and a closer view of the countertop, window, upper cabinets, oven, and refrigerator.", "intent": "Review the completed kitchen model from multiple perspectives.", "app": "SketchUp 2024", "details": null}, {"start_s": 17836.325, "end_s": 17849.341, "action": "Scrolled and adjusted the SketchUp camera around the completed kitchen model, then middle-clicked to navigate the view.", "intent": "Inspect the kitchen layout from a slightly adjusted perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 17849.341, "end_s": 17859.564, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom around the kitchen model, moving from a distant overview to a closer angled view.", "intent": "Navigate the 3D scene for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 17859.564, "end_s": 17865.261, "action": "Middle-clicked and scrolled to orbit and zoom into the kitchen work area, bringing the cooktop and surrounding cabinets into view.", "intent": "Focus the camera on the cooktop area.", "app": "SketchUp 2024", "details": null}, {"start_s": 17865.261, "end_s": 17875.829, "action": "Clicked the cooktop component, selecting it as a grouped object; the view remained closely framed on the cooktop above the oven and drawers.", "intent": "Select the cooktop component for editing or repositioning.", "app": "SketchUp 2024", "details": "The selected cooktop displayed a blue outline and an \u201cOn Face in Group\u201d inference."}, {"start_s": 17875.829, "end_s": 17889.965, "action": "Typed a command, clicked the selected cooktop, and activated rotation; rotated the cooktop upward and away from its original position while keeping it selected.", "intent": "Reorient the cooktop component.", "app": "SketchUp 2024", "details": "The rotation tool showed an angle of approximately 49 degrees."}, {"start_s": 17889.965, "end_s": 17899.834, "action": "Entered 90 and confirmed it, then continued rotating and repositioning the selected cooktop above the cabinetry.", "intent": "Set a precise 90-degree rotation and continue placing the cooktop.", "app": "SketchUp 2024", "details": "The status bar showed Angle 90.0 and later a movement distance of 466.71 mm."}, {"start_s": 17899.834, "end_s": 17910.86, "action": "Scrolled the SketchUp kitchen model and clicked near the selected cooktop, leaving the cooktop group active in move mode.", "intent": "Adjust or position the cooktop component on the countertop.", "app": "SketchUp 2024", "details": "The cooktop remained highlighted in blue with an inference tooltip and distance readout."}, {"start_s": 17910.86, "end_s": 17920.762, "action": "Typed \u201cs,\u201d selected the cooktop group, and dragged a scale handle to reduce its size; clicked again while the scaled group remained selected.", "intent": "Resize the cooktop to fit the countertop.", "app": "SketchUp 2024", "details": "The scale readout changed to approximately 0.83 and the cooktop visibly became smaller."}, {"start_s": 17920.762, "end_s": 17930.622, "action": "Exited scaling and orbited/zoomed the SketchUp camera to review the resized cooktop in the wider kitchen model, then clicked near it.", "intent": "Inspect the cooktop placement within the kitchen layout.", "app": "SketchUp 2024", "details": "The view widened to show the surrounding cabinets, backsplash, oven, and countertop."}, {"start_s": 17930.622, "end_s": 17940.255, "action": "Clicked the cooktop and navigated the camera around it, then moved to a wide kitchen view and clicked again.", "intent": "Review the cooktop placement and overall kitchen composition.", "app": "SketchUp 2024", "details": "The cooktop was shown selected before the view changed to a full kitchen perspective."}, {"start_s": 17940.255, "end_s": 17948.181, "action": "Zoomed and orbited around the cooktop for a close inspection, clicking with the middle mouse button to adjust the viewpoint.", "intent": "Inspect the cooktop geometry and controls from multiple angles.", "app": "SketchUp 2024", "details": "The close views clearly showed four burners, four knobs, and the cooktop plate on the counter."}, {"start_s": 17948.181, "end_s": 17958.254, "action": "Orbited and zoomed from the cooktop to the oven controls, then pulled back to review the complete kitchen scene.", "intent": "Inspect the oven area and confirm the cooktop\u2019s placement in the finished kitchen view.", "app": "SketchUp 2024", "details": "The camera briefly centered on the oven display and controls before returning to a wide view with cabinets, windows, refrigerator, oven, and cooktop."}, {"start_s": 17958.254, "end_s": 17967.974, "action": "Orbit and zoom the SketchUp camera around the modeled kitchen, moving from a wider view to a closer view of the cabinets, oven, cooktop, and refrigerator.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 17967.974, "end_s": 17986.807, "action": "Zoom and orbit around the kitchen model, alternating between closer and wider views while keeping the cabinetry and appliances visible.", "intent": "Continue reviewing the kitchen layout and model details.", "app": "SketchUp 2024", "details": null}, {"start_s": 17986.807, "end_s": 17996.925, "action": "Zoom farther out to reveal the complete kitchen platform and nearby loose components, then continue adjusting the camera and click within the model area.", "intent": "Review the overall scene and surrounding components.", "app": "SketchUp 2024", "details": null}, {"start_s": 17996.925, "end_s": 18007.519, "action": "Zoom far out from the kitchen, click in the scene, then zoom back toward the kitchen and nearby loose fixtures; select the small crate-like object containing bottles and cups.", "intent": "Locate and inspect a loose modeled object near the kitchen.", "app": "SketchUp 2024", "details": "The selected crate-like object is outlined in blue."}, {"start_s": 18007.519, "end_s": 18018.126, "action": "Zoom in on the selected crate of bottles and cups, type the letter \"m,\" and leave the object active with the Move tool.", "intent": "Prepare to move the selected crate-like object.", "app": "SketchUp 2024", "details": "The Move tool is active and the selected object remains outlined in blue."}, {"start_s": 18018.126, "end_s": 18027.981, "action": "Zoom and orbit closely around the selected crate, click in the scene, then zoom back out to show the crate positioned near the kitchen platform.", "intent": "Inspect the selected object and its placement relative to the kitchen.", "app": "SketchUp 2024", "details": "The crate remains selected; the final view shows it near the kitchen floor area."}, {"start_s": 18027.981, "end_s": 18039.629, "action": "Adjusted the SketchUp view around the kitchen counter and selected the bottle rack, bringing it into a closer view near the cooktop.", "intent": "Inspect and position the bottle rack in the kitchen model.", "app": "SketchUp 2024", "details": "The bottle rack remained selected with move handles visible."}, {"start_s": 18039.629, "end_s": 18050.196, "action": "Zoomed and repositioned the view, then used the Scale tool to resize the selected bottle rack; clicked again to finish the scaling adjustment.", "intent": "Resize the bottle rack within the kitchen scene.", "app": "SketchUp 2024", "details": "The scale factor visibly changed from about 0.96 to 0.74 while the rack stayed selected."}, {"start_s": 18050.196, "end_s": 18060.429, "action": "Navigated around the countertop and used the Move tool to reposition the selected bottle rack toward the corner beside the cooktop.", "intent": "Place the bottle rack in the countertop corner.", "app": "SketchUp 2024", "details": "The rack was shown selected near the backsplash and cooktop, with movement distance displayed."}, {"start_s": 18060.429, "end_s": 18075.349, "action": "Continued moving the selected bottle rack and clicked to place it near the corner countertop beside the cooktop.", "intent": "Finalize the rack placement beside the cooktop.", "app": "SketchUp 2024", "details": "The rack remained highlighted after placement."}, {"start_s": 18075.349, "end_s": 18082.451, "action": "Changed the camera angle and zoomed toward the cooktop, then selected the bottle rack and adjusted its position or view near the backsplash.", "intent": "Review the rack placement from a front-facing kitchen view.", "app": "SketchUp 2024", "details": "The rack was displayed above the counter corner with its contents visible."}, {"start_s": 18082.451, "end_s": 18092.517, "action": "Adjusted the camera around the selected bottle rack and moved it from the backsplash area onto the countertop edge near the oven and cooktop.", "intent": "Reposition the bottle rack within the kitchen layout.", "app": "SketchUp 2024", "details": "The final view showed the rack selected on the counter beside the cooktop."}, {"start_s": 18092.517, "end_s": 18102.924, "action": "Clicked the selected beverage rack and scrolled while moving it toward the countertop corner, then clicked to place or continue positioning it.", "intent": "Position the beverage rack in the kitchen model.", "app": "SketchUp 2024", "details": "The rack remained selected and the movement distance changed from approximately 116.51 mm to 1.54 mm."}, {"start_s": 18102.924, "end_s": 18114.173, "action": "Continued positioning the selected beverage rack with a click and scroll adjustments, moving it farther across the countertop area.", "intent": "Fine-tune the rack placement in the kitchen model.", "app": "SketchUp 2024", "details": "The rack stayed selected; the displayed movement distance increased to approximately 32.03 mm."}, {"start_s": 18114.173, "end_s": 18124.167, "action": "Adjusted the view with orbit and scroll gestures around the selected rack, then completed the move and reviewed the kitchen from wider angles.", "intent": "Inspect the rack placement within the kitchen scene.", "app": "SketchUp 2024", "details": "The rack appears positioned in the back corner above the cooktop, and the view ends on a wide kitchen overview."}, {"start_s": 18124.167, "end_s": 18132.239, "action": "Orbited and zoomed the camera around the kitchen, moving from a wide room view to a closer view of the countertop, cooktop, and beverage rack.", "intent": "Review the kitchen layout and rack placement from multiple viewpoints.", "app": "SketchUp 2024", "details": "No geometry was visibly edited; the camera moved closer to the counter corner."}, {"start_s": 18132.239, "end_s": 18141.326, "action": "Scrolled and orbited outward to inspect the complete kitchen, then zoomed farther away to reveal separate unplaced kitchen components in the surrounding workspace.", "intent": "Review the overall model and nearby components.", "app": "SketchUp 2024", "details": "The view transitions from the assembled kitchen to an exterior workspace containing a hood, dish rack, sink, and knife rack."}, {"start_s": 18141.326, "end_s": 18151.501, "action": "Scrolled and orbited toward the loose kitchen components, then clicked the freestanding knife rack to select it.", "intent": "Select the knife rack for a possible subsequent placement.", "app": "SketchUp 2024", "details": "The knife rack is highlighted with a blue bounding box while the assembled kitchen remains visible in the background."}, {"start_s": 18151.501, "end_s": 18159.366, "action": "Typed a character, clicked, and scrolled while moving a selected sink-related model component; zoomed or repositioned the kitchen view and left the component selected near the upper-right wall.", "intent": "Position the selected kitchen component in the model.", "app": "SketchUp 2024", "details": "Move tool remained active and the selected component was connected to the cursor by inference guides."}, {"start_s": 18159.366, "end_s": 18166.127, "action": "Scrolled to zoom and inspect the selected wall-mounted rack area above the kitchen counter.", "intent": "Review the component placement against the kitchen wall.", "app": "SketchUp 2024", "details": "The rack remained selected in blue near the upper-right backsplash."}, {"start_s": 18166.127, "end_s": 18183.78, "action": "Paused with the kitchen model in view and the wall-mounted rack selected.", "intent": "Hold the current model state before continuing placement.", "app": "SketchUp 2024", "details": "No substantive interaction occurred until the final clicks."}, {"start_s": 18183.78, "end_s": 18194.853, "action": "Clicked to begin moving the preselected rack, then orbited and zoomed around the upper kitchen wall; clicked again to select or initiate movement of the rack.", "intent": "Adjust or inspect the rack\u2019s position on the kitchen wall.", "app": "SketchUp 2024", "details": "The rack was shown selected with move handles and an active placement distance."}, {"start_s": 18194.853, "end_s": 18204.212, "action": "Scrolled and orbited around the kitchen corner, transitioning to a shaded view and inspecting the mounted rack, counter, cooktop, and adjacent cabinets from closer angles.", "intent": "Review the rack placement and surrounding kitchen layout.", "app": "SketchUp 2024", "details": "The view ended with the rack mounted above the backsplash and the surrounding kitchen fixtures visible."}, {"start_s": 18204.212, "end_s": 18213.214, "action": "Clicked the model and continued scrolling to orbit or zoom across the kitchen corner, inspecting the rack, windows, upper cabinets, counter, and cooktop.", "intent": "Examine the completed kitchen arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": "The interface returned to the Select tool and no object was visibly selected."}, {"start_s": 18213.214, "end_s": 18225.919, "action": "Scrolled through the SketchUp kitchen model, moving the view from a wider kitchen layout toward the sink and dish rack.", "intent": "Inspect the kitchen model and reposition the camera for closer viewing.", "app": "SketchUp 2024", "details": null}, {"start_s": 18225.919, "end_s": 18235.902, "action": "Clicked and scrolled around the sink area, selected the dish rack, and began moving it with the Move tool; the rack appeared highlighted in blue.", "intent": "Select and reposition the dish rack within the kitchen model.", "app": "SketchUp 2024", "details": "The Move tool was active at the end of the span."}, {"start_s": 18235.902, "end_s": 18245.167, "action": "Scrolled and adjusted the view while continuing to move the selected dish rack along the countertop near the cooktop and bottle rack.", "intent": "Place the dish rack in a specific countertop location.", "app": "SketchUp 2024", "details": "The selected rack remained highlighted and the movement distance was shown in the status area."}, {"start_s": 18245.167, "end_s": 18254.997, "action": "Clicked and dragged around the kitchen, orbiting and adjusting the model view while manipulating the dish rack and then returning to a wider kitchen perspective.", "intent": "Review the dish rack placement in the overall kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 18254.997, "end_s": 18265.397, "action": "Scrolled and orbited from the wide kitchen view to a close-up of the countertop, dish rack, bottle rack, cooktop, and oven, then returned to a wider overview.", "intent": "Inspect the modeled countertop arrangement and verify object placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 18265.397, "end_s": 18279.512, "action": "Clicked and scrolled to orbit and zoom into the kitchen countertop, ending on a close view of the dish rack, utensil holder, bottle rack, window, and cooktop.", "intent": "Review the final kitchen arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 18279.512, "end_s": 18290.11, "action": "Scrolled through the SketchUp kitchen model and orbited the view to reveal a wider kitchen layout.", "intent": "Inspect the modeled kitchen from different viewpoints.", "app": "SketchUp 2024", "details": "Viewed the sink, cooktop, kettle, cabinetry, appliances, and refrigerator."}, {"start_s": 18290.11, "end_s": 18310.11, "action": "Orbited and zoomed the SketchUp camera toward the main kitchen cabinetry, countertop, window, cooktop, and refrigerator.", "intent": "Examine the kitchen arrangement more closely.", "app": "SketchUp 2024", "details": "Ended on a closer elevated view of the kitchen corner."}, {"start_s": 18310.11, "end_s": 18330.11, "action": "Paused with the SketchUp kitchen model displayed without recorded interaction.", "intent": "Review the current kitchen model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 18330.11, "end_s": 18335.837, "action": "Scrolled and orbited the SketchUp view to reposition the camera around the kitchen corner.", "intent": "Adjust the viewpoint for continued inspection.", "app": "SketchUp 2024", "details": "The view shifted to show the cabinetry, cooktop, refrigerator, and countertop from a wider angle."}, {"start_s": 18335.837, "end_s": 18344.816, "action": "Scrolled to zoom in on the kitchen countertop, window, dish rack, cooktop, and adjacent cabinetry.", "intent": "Inspect the kitchen fixtures and countertop area.", "app": "SketchUp 2024", "details": "Ended on a close view of the counter and right-side appliances."}, {"start_s": 18344.816, "end_s": 18353.655, "action": "Scrolled and orbited repeatedly around the SketchUp model, alternating between closer and wider views of the kitchen layout.", "intent": "Review the overall kitchen design from multiple angles.", "app": "SketchUp 2024", "details": "The final view showed the full cabinetry run, window, cooktop, oven, and refrigerator."}, {"start_s": 18353.655, "end_s": 18361.336, "action": "Scrolled through the SketchUp kitchen model, moving from a close view of the dish rack, drink cart, and cooktop to a wider view of the cabinets and appliances.", "intent": "Review the kitchen layout from different camera distances.", "app": "SketchUp 2024", "details": null}, {"start_s": 18361.336, "end_s": 18372.88, "action": "Scrolled repeatedly to zoom in on the drink cart and bottles, then zoomed back out to the surrounding counter, cabinets, and cooktop.", "intent": "Inspect the drink-cart area and its placement within the kitchen.", "app": "SketchUp 2024", "details": null}, {"start_s": 18372.88, "end_s": 18382.551, "action": "Scrolled to zoom out and review a wider perspective of the kitchen corner, including the windows, cabinets, refrigerator, cooktop, and drink cart.", "intent": "Review the overall kitchen composition.", "app": "SketchUp 2024", "details": null}, {"start_s": 18382.551, "end_s": 18392.975, "action": "Clicked the middle mouse button and scrolled to orbit and adjust the camera, changing from a distant room view to a closer frontal view of the counter and appliances.", "intent": "Reposition the camera for a clearer kitchen overview.", "app": "SketchUp 2024", "details": null}, {"start_s": 18392.975, "end_s": 18401.415, "action": "Clicked the middle mouse button and scrolled through several camera adjustments, alternating between wide and close views of the countertop, dish rack, drink cart, cooktop, and cabinetry.", "intent": "Examine the kitchen model from multiple perspectives.", "app": "SketchUp 2024", "details": null}, {"start_s": 18401.415, "end_s": 18409.924, "action": "Clicked the toolbar tool at the upper left, leaving SketchUp in Place Component mode, then scrolled and middle-clicked to reposition the view; a gray sink component appeared over the countertop.", "intent": "Begin positioning a sink component in the kitchen model.", "app": "SketchUp 2024", "details": "Status bar shows \u201cPlace component.\u201d"}, {"start_s": 18409.924, "end_s": 18420.3, "action": "Adjusted the SketchUp view around the kitchen sink and countertop, then clicked to change the selection and zoomed closer to the cabinets.", "intent": "Inspect and select kitchen model elements.", "app": "SketchUp", "details": "The sink area and lower cabinets remained visible; the view changed from a closer selected view to a tighter cabinet view."}, {"start_s": 18420.3, "end_s": 18430.133, "action": "Selected the countertop or surrounding kitchen geometry, orbited and zoomed out through several views, and left the full kitchen layout visible.", "intent": "Review the kitchen model and its selected countertop geometry.", "app": "SketchUp", "details": "The countertop perimeter was highlighted in blue in an overhead view before the camera pulled back."}, {"start_s": 18430.133, "end_s": 18446.186, "action": "Orbited and zoomed back toward the countertop, clicked the model repeatedly, and hovered over the toolbar item labeled \u201cSink for Furniture 60cm.\u201d", "intent": "Inspect or prepare a sink component for the kitchen model.", "app": "SketchUp", "details": "The countertop was highlighted and the sink component tooltip was visible; the span ended with SketchUp active."}, {"start_s": 18446.186, "end_s": 18450.873, "action": "Clicked the selected kitchen geometry and opened a SketchUp warning asking whether to replace a selection that does not belong to Click-Change 2.", "intent": "Attempt a component replacement or Click-Change operation.", "app": "SketchUp", "details": "A modal warning with Yes and No buttons blocked the model view."}, {"start_s": 18450.873, "end_s": 18460.884, "action": "Returned to the SketchUp model, adjusted the view and selection state, used keyboard undo inputs, and zoomed out to show more of the kitchen.", "intent": "Recover from the warning and revise the recent model operation.", "app": "SketchUp", "details": "The countertop selection changed during the span, and the final view showed the wider kitchen layout."}, {"start_s": 18460.884, "end_s": 18470.789, "action": "Clicked and dragged around the model, resized or moved a Windows Explorer window, then returned to SketchUp, zoomed out substantially, and selected a joint-base element.", "intent": "Navigate the model and access or adjust a component-related tool.", "app": "SketchUp", "details": "The final status bar read \u201cSelect joint base element,\u201d with the kitchen shown in a distant perspective view."}, {"start_s": 18470.789, "end_s": 18479.199, "action": "Orbited and zoomed the SketchUp kitchen model, shifting the view from the full kitchen toward the countertop, dish rack, stove, and cabinets.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 18479.199, "end_s": 18497.447, "action": "Continued orbiting and zooming around the kitchen corner, bringing the dish rack, bottle shelf, cooktop, oven, and refrigerator area into closer view.", "intent": "Review details of the kitchen corner.", "app": "SketchUp 2024", "details": null}, {"start_s": 18497.447, "end_s": 18504.839, "action": "Orbited the model toward the right side, revealing more of the refrigerator and the kitchen wall while keeping the countertop and cabinets visible.", "intent": "Examine the right side of the kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 18504.839, "end_s": 18511.726, "action": "Paused on a close view of the kitchen corner; a Windows Explorer window was resized and moved near the end of the span without changing the visible SketchUp model.", "intent": "Continue reviewing the model while adjusting a window.", "app": "SketchUp 2024", "details": "Windows Explorer window resize and move events occurred near the end."}, {"start_s": 18511.726, "end_s": 18531.726, "action": "Remained on the same close SketchUp view of the kitchen corner with no visible modeling interaction; system configuration and connectivity state changes were recorded during the interval.", "intent": "Wait while retaining the current model view.", "app": "SketchUp 2024", "details": "Screen, Wi-Fi, network, power-source, input-source, and memory-pressure events were recorded."}, {"start_s": 18531.726, "end_s": 18541.117, "action": "Resumed interaction, made several scroll gestures, and zoomed out substantially to show the overall kitchen model.", "intent": "Review the overall kitchen layout after inspecting the corner.", "app": "SketchUp 2024", "details": "A Windows Explorer window move/resize and system state changes also occurred."}, {"start_s": 18541.117, "end_s": 18551.124, "action": "Orbited and zoomed the SketchUp kitchen model from a wider view into a closer view of the cabinets, sink, stove, and refrigerator.", "intent": "Inspect the kitchen layout from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 18551.124, "end_s": 18559.525, "action": "Selected the component-placement tool and navigated closer to the sink and lower cabinetry, leaving the view focused on the sink area.", "intent": "Position the model view for sink-area editing.", "app": "SketchUp 2024", "details": "The status bar shows Place component."}, {"start_s": 18559.525, "end_s": 18569.558, "action": "Selected the sink and faucet assembly, then zoomed and orbited back to a wider kitchen view while keeping the assembly selected.", "intent": "Select and inspect the sink assembly.", "app": "SketchUp 2024", "details": "The sink/faucet assembly is outlined in blue."}, {"start_s": 18569.558, "end_s": 18579.547, "action": "Zoomed into the sink countertop and repeatedly clicked around the basin and faucet, ending on a close-up of the sink area.", "intent": "Inspect or select geometry around the sink.", "app": "SketchUp 2024", "details": null}, {"start_s": 18579.547, "end_s": 18589.83, "action": "Entered a drawing tool with a typed character, then zoomed and panned across the sink opening and countertop surface.", "intent": "Begin drawing or measuring geometry around the sink.", "app": "SketchUp 2024", "details": "The status bar shows Click to set first corner, indicating an active rectangle-like drawing operation."}, {"start_s": 18589.83, "end_s": 18599.83, "action": "Placed a first drawing point near the sink, navigated around the basin, and set another point to extend a rectangular outline across the countertop area.", "intent": "Create countertop geometry around the sink.", "app": "SketchUp 2024", "details": "The active drawing preview and Dimensions field remain visible; the displayed size reaches approximately 547.34 cm by 5.00 mm."}, {"start_s": 18599.83, "end_s": 18610.829, "action": "Navigated around the sink area with repeated clicks and scrolling, then selected geometry and began a drawing or editing operation near the countertop.", "intent": "Inspect and prepare the sink/countertop geometry for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 18610.829, "end_s": 18624.638, "action": "Selected the sink face and activated Push/Pull; entered a 20.00 mm distance, then canceled or reset the operation so the face appeared flat again.", "intent": "Adjust the sink face depth or test a Push/Pull modification.", "app": "SketchUp 2024", "details": "The Distance field showed 20.00 mm during the operation and later 0.00 mm."}, {"start_s": 18624.638, "end_s": 18634.356, "action": "Clicked repeatedly around the sink and countertop, orbited and zoomed the view, then selected the sink rim and a long countertop edge.", "intent": "Inspect and select related sink and countertop geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 18634.356, "end_s": 18644.564, "action": "Opened a context menu on the sink face, navigated among face-editing options, and then used Push/Pull to extrude the rectangular sink area into a large box-like form.", "intent": "Modify the selected sink face geometry.", "app": "SketchUp 2024", "details": "The context menu included Reverse Faces, Orient Faces, and Divide Faces."}, {"start_s": 18644.564, "end_s": 18654.316, "action": "Zoomed or repositioned the model, used keyboard shortcuts, and clicked the extruded geometry; then orbited the camera to return to a broader view of the sink and countertop.", "intent": "Review the resulting extrusion and adjust the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 18654.316, "end_s": 18666.166, "action": "Orbited and repositioned the camera around the sink, selected the sink face, and started a Push/Pull operation that displayed a 377.31 mm distance.", "intent": "Continue editing the sink basin depth.", "app": "SketchUp 2024", "details": "The sink face was selected and the Push/Pull Distance field showed 377.31 mm."}, {"start_s": 18666.166, "end_s": 18676.227, "action": "Clicked around the sink and countertop, briefly activated a tool, then navigated the camera from a close sink view to a wider kitchen view using middle-button movements and scrolling.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "The model remained unchanged; the final view showed the full kitchen layout."}, {"start_s": 18676.227, "end_s": 18686.548, "action": "Navigated around the kitchen model with middle-button camera movements and scrolling, then clicked and dragged around the upper-right cabinetry before repositioning to a closer view of the sink, stove, dish rack, and cabinets.", "intent": "Review the kitchen model and inspect its components from multiple angles.", "app": "SketchUp 2024", "details": "No confirmed geometry edit was visible."}, {"start_s": 18686.548, "end_s": 18696.739, "action": "Adjusted the camera around the countertop and appliances, clicked the countertop surface, and ended with a rectangular countertop face selected in blue.", "intent": "Select and inspect a countertop face.", "app": "SketchUp 2024", "details": "The selected rectangular face was visible near the sink-side countertop."}, {"start_s": 18696.739, "end_s": 18706.86, "action": "Scrolled and navigated closer across the countertop, clicked the rectangular face and nearby cabinet edges, and left the countertop face and surrounding geometry selected or targeted.", "intent": "Inspect or select countertop and cabinet geometry.", "app": "SketchUp 2024", "details": "The view focused on the rectangular countertop area beside the oven."}, {"start_s": 18706.86, "end_s": 18716.508, "action": "Repeatedly clicked the countertop rectangle, moved the window slightly, pressed Escape several times to cancel active states, and clicked around the rectangle and adjacent countertop area.", "intent": "Refine or clear the selection while inspecting the countertop geometry.", "app": "SketchUp 2024", "details": "The rectangle was visible without a confirmed geometry change."}, {"start_s": 18716.508, "end_s": 18725.902, "action": "Clicked multiple points around the rectangular countertop face and ended with the face highlighted and selected in blue with a stippled fill.", "intent": "Select the countertop face for a possible next modeling operation.", "app": "SketchUp 2024", "details": "The final screenshot clearly showed the rectangular face selected."}, {"start_s": 18725.902, "end_s": 18732.838, "action": "Adjusted the SketchUp camera around the kitchen model using orbit/pan gestures and zooming, moving from a wide view to a closer front-facing view of the cabinets, appliances, and refrigerator.", "intent": "Inspect the overall kitchen layout from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 18732.838, "end_s": 18745.222, "action": "Zoomed and navigated toward the countertop corner, closely reviewing the dish rack and the colorful bottle-and-cup storage basket beside the cooktop.", "intent": "Inspect the countertop storage and dishware area.", "app": "SketchUp 2024", "details": null}, {"start_s": 18745.222, "end_s": 18754.96, "action": "Navigated around the countertop and cooktop, then pulled back and reframed the scene to show the dish rack, storage basket, four-burner cooktop, oven, upper cabinets, and refrigerator.", "intent": "Review the relationship between the cooking and storage areas.", "app": "SketchUp 2024", "details": null}, {"start_s": 18754.96, "end_s": 18764.596, "action": "Orbited and zoomed tightly around the cooktop and oven, ending on a close view of the cooktop controls and oven front.", "intent": "Inspect the cooktop and oven geometry in detail.", "app": "SketchUp 2024", "details": null}, {"start_s": 18764.596, "end_s": 18772.846, "action": "Selected the oven assembly with clicks, entered the Scale tool, and began manipulating the selected oven component while zoomed in on its front.", "intent": "Resize or adjust the oven component.", "app": "SketchUp 2024", "details": "The oven is highlighted with a blue selection outline and scale handles."}, {"start_s": 18772.846, "end_s": 18783.565, "action": "Continued scaling the selected oven assembly while orbiting the view; changed the visible scale value from 0.90 to 0.58 and reframed the oven and adjacent drawers.", "intent": "Fine-tune the oven assembly dimensions.", "app": "SketchUp 2024", "details": "Scale mode remained active with green handles and a visible scale value field."}, {"start_s": 18783.565, "end_s": 18793.028, "action": "Adjusted the SketchUp camera around the modeled kitchen, orbiting and zooming toward the oven and cooktop while clicking near the oven controls.", "intent": "Inspect the oven area from different viewpoints.", "app": "SketchUp 2024", "details": "The view changed from an angled close-up to a more centered front view of the oven and drawers."}, {"start_s": 18793.028, "end_s": 18813.028, "action": "Waited with the SketchUp kitchen model visible; no clear interaction occurred until the application was hidden near the end of the span.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 18813.028, "end_s": 18825.534, "action": "Pressed the 's' key while the SketchUp model remained visible, leaving the oven assembly in view.", "intent": "Activate or use a SketchUp tool or shortcut.", "app": "SketchUp 2024", "details": "The Scale tool appeared active by the end of the span."}, {"start_s": 18825.534, "end_s": 18835.894, "action": "Adjusted the camera around the oven with scrolling and orbiting, then clicked the oven assembly to select it.", "intent": "Reframe and select the oven assembly for editing.", "app": "SketchUp 2024", "details": "The oven front became outlined in blue, indicating selection."}, {"start_s": 18835.894, "end_s": 18846.159, "action": "Orbited and zoomed closer to the selected oven, entered the Scale tool, and dragged a scale handle near the upper-left edge before pressing Escape.", "intent": "Inspect or adjust the selected oven assembly's scale.", "app": "SketchUp 2024", "details": "The selected assembly displayed scale guides and a visible scale value of about 1.01 before the operation was canceled."}, {"start_s": 18846.159, "end_s": 18858.142, "action": "Scrolled and zoomed out from the oven, then orbited to a wider view of the kitchen cabinetry and clicked around the model.", "intent": "Review the model in a wider context after the scale attempt.", "app": "SketchUp 2024", "details": "The final view showed the oven, drawers, cooktop, shelving, and refrigerator area."}, {"start_s": 18858.142, "end_s": 18866.448, "action": "Orbit and zoom the SketchUp camera repeatedly, moving from a close kitchen view to a distant view of the full model.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 18866.448, "end_s": 18877.91, "action": "Zoom and orbit around the kitchen model, shifting from an angled interior view to a higher, more distant overview.", "intent": "Review the overall kitchen layout and surrounding model elements.", "app": "SketchUp", "details": null}, {"start_s": 18877.91, "end_s": 18887.957, "action": "Zoom toward the detached sink, click repeatedly near the sink model, then orbit and zoom back toward the kitchen assembly.", "intent": "Inspect or select components near the sink and kitchen model.", "app": "SketchUp", "details": null}, {"start_s": 18887.957, "end_s": 18896.52, "action": "Orbit and zoom over the kitchen, click repeatedly on the countertop area, and leave the countertop visibly selected with a dotted highlight.", "intent": "Inspect or select the kitchen countertop geometry.", "app": "SketchUp", "details": null}, {"start_s": 18896.52, "end_s": 18916.52, "action": "Remain inactive while the selected countertop and kitchen model stay visible in SketchUp.", "intent": "Pause to review the current model state.", "app": "SketchUp", "details": null}, {"start_s": 18916.52, "end_s": 18926.541, "action": "Zoom farther out and orbit slightly around the selected kitchen countertop, then click in the model area.", "intent": "Continue reviewing the kitchen model from a wider viewpoint.", "app": "SketchUp", "details": null}, {"start_s": 18926.541, "end_s": 18933.671, "action": "Adjusted the SketchUp camera around the kitchen model with middle-button navigation and scrolling, then clicked near the upper cabinetry and countertop area.", "intent": "Navigate and inspect the kitchen model from a different viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 18933.671, "end_s": 18953.671, "action": "Remained inactive while the SketchUp kitchen model stayed visible in a wide perspective view.", "intent": "Review the completed kitchen layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 18953.671, "end_s": 18967.481, "action": "Zoomed out and orbited the SketchUp camera to show the entire kitchen model, leaving the model in a smaller centered view.", "intent": "Inspect the overall kitchen arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 18967.481, "end_s": 18977.611, "action": "Orbited and zoomed the camera toward the countertop, sink area, stovetop, and cabinetry for a closer inspection.", "intent": "Examine details of the kitchen fixtures and counter layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 18977.611, "end_s": 18987.793, "action": "Continued navigating the model with camera orbit and zoom, clicked the countertop area, and ended on a pulled-back view where separate kitchen objects were visible outside the main room model.", "intent": "Inspect and reposition the kitchen components in the scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 18987.793, "end_s": 18999.988, "action": "Selected the separate sink object, typed \"m\", and used the Move tool while navigating the view; the sink remained selected with its move bounding box visible.", "intent": "Prepare to reposition the sink component.", "app": "SketchUp 2024", "details": "The final view shows the sink selected and the Move tool active."}, {"start_s": 18999.988, "end_s": 19010.589, "action": "Dragged and scrolled within the SketchUp kitchen model, then orbited and zoomed out to reveal the full room while keeping a selected countertop object active.", "intent": "Inspect the model from different viewpoints and reposition the selected object.", "app": "SketchUp 2024", "details": null}, {"start_s": 19010.589, "end_s": 19021.428, "action": "Orbited and zoomed toward the back counter, bringing the sink area into closer view while the selected sink-related object remained active.", "intent": "Adjust the camera to inspect the sink and countertop placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 19021.428, "end_s": 19031.22, "action": "Zoomed and orbited around the kitchen, then selected the sink assembly and brought it into a close front view.", "intent": "Inspect and select the sink assembly for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 19031.22, "end_s": 19041.266, "action": "Clicked repeatedly around the sink and countertop, changing the active selection and view; then clicked near the top toolbar before SketchUp became hidden.", "intent": "Refine the sink-area selection and switch away from the modeling view.", "app": "SketchUp 2024", "details": null}, {"start_s": 19041.266, "end_s": 19054.594, "action": "Worked on the sink face with the Push/Pull tool, entering a value and changing the geometry so the double-basin sink became visibly recessed and filled blue.", "intent": "Modify the sink basin geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 19054.594, "end_s": 19064.681, "action": "Selected the sink basin faces, used Push/Pull interactions and camera adjustments, then right-clicked the selected face to open the context menu with editing options.", "intent": "Continue editing the sink faces and access face-editing commands.", "app": "SketchUp 2024", "details": null}, {"start_s": 19064.681, "end_s": 19073.235, "action": "Clicked around the sink model, hid the application briefly, typed \u201cp,\u201d and selected a sink face while the Push/Pull tool became active.", "intent": "Modify or inspect the sink geometry.", "app": "SketchUp 2024", "details": "The left basin face was selected and the distance field showed 345.85 mm."}, {"start_s": 19073.235, "end_s": 19083.347, "action": "Zoomed and orbited around the kitchen counter and sink, clicked sink and cabinet areas, and selected a face for Push/Pull editing.", "intent": "Inspect the sink and surrounding cabinetry from different views.", "app": "SketchUp 2024", "details": "The camera moved from a wider kitchen view to a closer overhead sink view; the distance field showed 682.00 mm."}, {"start_s": 19083.347, "end_s": 19093.394, "action": "Zoomed into the sink, selected the right basin, and clicked and typed while adjusting the active modeling operation; the right basin became highlighted with a measured distance of 18.81 mm.", "intent": "Edit the right sink basin geometry.", "app": "SketchUp 2024", "details": "The right basin face was selected, with the left basin showing the resulting geometry or shading change."}, {"start_s": 19093.394, "end_s": 19103.338, "action": "Orbited and zoomed out from the sink, clicked basin and cabinet areas, and returned to a broad view of the kitchen counter.", "intent": "Review the sink modification in the context of the kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the full counter, sink, drawers, cabinets, windows, dish rack, and oven."}, {"start_s": 19103.338, "end_s": 19113.428, "action": "Orbited and zoomed around the sink, repeatedly clicked the basin, opened a context interaction, selected a basin face, and then hid the application.", "intent": "Continue inspecting or editing the sink model.", "app": "SketchUp 2024", "details": "The left basin was highlighted in the later close view; the application became hidden near the end of the span."}, {"start_s": 19113.428, "end_s": 19124.122, "action": "Selected the left basin and used the Push/Pull tool, then orbited to a lower front view of the sink and cabinets.", "intent": "Adjust and review the left sink basin geometry.", "app": "SketchUp 2024", "details": "The selected left basin showed a 0.00 mm distance before the final orbit view."}, {"start_s": 19124.122, "end_s": 19134.882, "action": "Adjusted the SketchUp camera around the kitchen sink with middle-click navigation, scrolling, and selections; ended with the right sink basin selected.", "intent": "Inspect and position the sink model for editing.", "app": "SketchUp", "details": "Kitchen cabinet and double-basin sink model remained visible."}, {"start_s": 19134.882, "end_s": 19147.936, "action": "Selected edges around the left basin, opened the context menu, and navigated to Intersect Faces so the With Selection option was displayed.", "intent": "Prepare an intersection operation on the selected sink geometry.", "app": "SketchUp", "details": "The SketchUp context menu showed Intersect Faces and its submenu."}, {"start_s": 19147.936, "end_s": 19158.145, "action": "Returned focus to SketchUp, clicked the right basin and surrounding geometry, and changed the selection state while dismissing the context menu.", "intent": "Select and inspect basin geometry after the intersection-menu operation.", "app": "SketchUp", "details": "The right basin was visibly selected, then the selection appearance changed."}, {"start_s": 19158.145, "end_s": 19168.185, "action": "Activated Push/Pull, clicked and dragged on the sink and countertop geometry, and orbited or zoomed to a wider view of the double sink.", "intent": "Modify or inspect the sink surface geometry from different views.", "app": "SketchUp", "details": "The Push/Pull status prompt and a distance value of 301.61 mm were visible during the operation."}, {"start_s": 19168.185, "end_s": 19178.045, "action": "Continued clicking and dragging around the basin edges while adjusting the camera, then zoomed in toward the sink.", "intent": "Refine or inspect the basin edge geometry.", "app": "SketchUp", "details": "The view progressively centered on the double-basin sink."}, {"start_s": 19178.045, "end_s": 19187.908, "action": "Selected and right-clicked sink geometry, clicked the upper basin edge, briefly activated Push/Pull, then pressed Escape and scrolled the view.", "intent": "Inspect and adjust the selected basin edge while leaving the modeling tool.", "app": "SketchUp", "details": "The close-up view showed the double sink with the upper edge of the left basin under inspection."}, {"start_s": 19187.908, "end_s": 19200.495, "action": "Adjusted the SketchUp kitchen sink geometry with repeated clicks, scrolling, and brief keyboard input, then switched focus back to the SketchUp window as the left basin appeared formed.", "intent": "Modify the sink model geometry.", "app": "SketchUp", "details": "The view shows a double-basin sink; an offset limit of 664.00 mm is visible."}, {"start_s": 19200.495, "end_s": 19210.412, "action": "Repositioned the SketchUp view around the sink with middle-click navigation and selected nearby geometry while the 664.00 mm offset limit remained displayed.", "intent": "Inspect and adjust the sink geometry from a different view.", "app": "SketchUp", "details": "The model view shifted to show more of the countertop and cabinet fronts."}, {"start_s": 19210.412, "end_s": 19219.314, "action": "Clicked and manipulated faces around the right sink basin, entered a keyboard command, and navigated the view until the right basin face was highlighted.", "intent": "Select or edit the right sink basin face.", "app": "SketchUp", "details": "The right basin floor is visibly selected with a dotted hatch."}, {"start_s": 19219.314, "end_s": 19230.011, "action": "Navigated slightly, clicked the cabinet area, and used the active push/pull-style tool before canceling the operation.", "intent": "Attempt a geometry adjustment on the selected sink or cabinet face.", "app": "SketchUp", "details": "The selected right basin face remains highlighted; a temporary distance of 35.35 mm was shown before cancellation."}, {"start_s": 19230.011, "end_s": 19239.691, "action": "Orbited and zoomed around the sink, then clicked repeatedly on the right basin area while changing the viewing angle.", "intent": "Inspect and select the right basin geometry from multiple angles.", "app": "SketchUp", "details": "The final view is a closer, angled inspection of the double sink."}, {"start_s": 19239.691, "end_s": 19248.918, "action": "Selected the right basin face repeatedly, opened its context menu, and left the face selected while the SketchUp window was briefly hidden and restored.", "intent": "Access editing commands for the selected right basin face.", "app": "SketchUp", "details": "The context menu includes Entity Info, Hide, Reverse Faces, JointPushPull, and Divide Faces."}, {"start_s": 19248.918, "end_s": 19258.971, "action": "Selected the right sink basin face and used Push/Pull with dragging and typed distance input, then adjusted the view by scrolling.", "intent": "Modify the depth or geometry of the right sink basin.", "app": "SketchUp 2024", "details": "The right basin face remained selected during the modeling operation."}, {"start_s": 19258.971, "end_s": 19268.942, "action": "Switched to selection and orbit/navigation interactions, clicking and scrolling around the sink assembly until the sink edges and basins were selected and the camera moved into a close-up view.", "intent": "Inspect and select components of the sink model.", "app": "SketchUp 2024", "details": "The final view showed both basins with their perimeter and interior edges highlighted."}, {"start_s": 19268.942, "end_s": 19277.838, "action": "Clicked and dragged across the sink geometry while scrolling, selecting the basins, faucet, and surrounding sink surfaces, then orbited to a higher angled view.", "intent": "Select and inspect the sink assembly from different viewpoints.", "app": "SketchUp 2024", "details": "Selection highlighting covered much of the double-basin sink and faucet."}, {"start_s": 19277.838, "end_s": 19287.822, "action": "Scrolled and orbited around the selected sink assembly, zooming from a close view to a wider front view; issued a clipboard-related keyboard command while maintaining the model view.", "intent": "Review the sink placement and overall model context.", "app": "SketchUp 2024", "details": "The sink remained selected and the wider view revealed the countertop, cabinets, window, and dish rack."}, {"start_s": 19287.822, "end_s": 19297.911, "action": "Orbited and zoomed out from the sink to show the surrounding kitchen, then clicked and dragged near the model boundary.", "intent": "Inspect the sink in the broader kitchen layout.", "app": "SketchUp 2024", "details": "The view expanded to include the cabinets, window, dish rack, and stove."}, {"start_s": 19297.911, "end_s": 19306.904, "action": "Orbited and zoomed back toward the double-basin sink, clicking around the model and ending with keyboard undo-style commands.", "intent": "Refine or review the sink view and recent modeling state.", "app": "SketchUp 2024", "details": "The final view centered the sink and faucet with the countertop and cabinet fronts visible."}, {"start_s": 19306.904, "end_s": 19317.03, "action": "Scrolled and orbited around the modeled kitchen, changing from an overhead sink-and-cooktop view to a wider front perspective.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 19317.03, "end_s": 19327.018, "action": "Continued orbiting and zooming around the kitchen, then switched back to SketchUp and selected the lower cabinet door.", "intent": "Frame and select a cabinet component for editing.", "app": "SketchUp", "details": "The selected cabinet door was outlined in blue near the end of the span."}, {"start_s": 19327.018, "end_s": 19340.572, "action": "Opened the Joint configuration dialog, displayed the joint-type menu with slider and hinge options, and navigated the model view while the dialog remained open.", "intent": "Configure a joint for the selected cabinet component.", "app": "SketchUp", "details": "The dialog showed hinge as the current joint type, with Select, Open, Close, Animation Time, and Close window controls."}, {"start_s": 19340.572, "end_s": 19348.07, "action": "Returned to the SketchUp model, adjusted the view around the selected cabinet, and closed or hid the Joint configuration dialog.", "intent": "Inspect the configured cabinet joint in the model.", "app": "SketchUp", "details": "The dialog was visible initially and absent by the later screenshot; the cabinet remained highlighted with joint guides."}, {"start_s": 19348.07, "end_s": 19361.542, "action": "Waited in the SketchUp model, then clicked the lower cabinet door to move it outward into an open position.", "intent": "Test the cabinet door joint animation or movement.", "app": "SketchUp", "details": "The lower cabinet door is visibly swung open in the final view."}, {"start_s": 19361.542, "end_s": 19371.606, "action": "Scrolled and clicked repeatedly around the lower cabinet opening, changing the view and leaving the cabinet components selected.", "intent": "Inspect or adjust the cabinet joint and surrounding geometry.", "app": "SketchUp", "details": "The final view shows the lower door open and multiple cabinet edges highlighted in blue."}, {"start_s": 19371.606, "end_s": 19380.254, "action": "Navigated and zoomed the SketchUp kitchen model toward the lower cabinets, then selected the recessed lower cabinet face.", "intent": "Inspect and prepare the lower cabinet area for editing.", "app": "SketchUp 2024", "details": "The view changed from a wider kitchen elevation to a close-up, with the lower recessed face highlighted."}, {"start_s": 19380.254, "end_s": 19389.833, "action": "Adjusted the SketchUp view and activated a modeling tool on the selected lower cabinet face; typed a few keys while keeping the face selected.", "intent": "Prepare the selected cabinet face for a modeling operation.", "app": "SketchUp 2024", "details": "The close-up remained focused on the lower cabinet opening and the selected blue-highlighted face."}, {"start_s": 19389.833, "end_s": 19400.104, "action": "Clicked the selected face and used the active push/pull operation to change the lower cabinet geometry, briefly revealing two cylindrical forms before returning to a rectangular recessed face.", "intent": "Modify the recessed lower cabinet geometry.", "app": "SketchUp 2024", "details": "The status bar showed Push/Pull, and the distance readout reached 268.19 mm before returning to 0.00 mm."}, {"start_s": 19400.104, "end_s": 19410.287, "action": "Orbited and zoomed around the kitchen model, then selected the lower recessed face again and continued inspecting the sink cabinet area.", "intent": "Review the modified cabinet geometry from different viewpoints.", "app": "SketchUp 2024", "details": "The view moved to an elevated angle over the sink and lower cabinets; the recessed face was highlighted, and two cylindrical forms were visible in the opening."}, {"start_s": 19410.287, "end_s": 19420.062, "action": "Zoomed further into the lower cabinet opening and started moving an item or selection near the right side of the recessed area.", "intent": "Position or adjust geometry within the cabinet opening.", "app": "SketchUp 2024", "details": "The close-up showed two cylindrical forms in the opening, with the Move tool status and a 250.27 mm distance readout visible."}, {"start_s": 19420.062, "end_s": 19430.768, "action": "Canceled the prior operation, selected faces and edges around the cylindrical cabinet contents, and performed extended drag selections across the opening.", "intent": "Select and manipulate the cabinet-opening geometry for further editing.", "app": "SketchUp 2024", "details": "Multiple faces and edge outlines became highlighted blue across the two cylindrical forms and surrounding base."}, {"start_s": 19430.768, "end_s": 19440.862, "action": "Exited the active tool, dragged and orbited the kitchen model, then clicked and scrolled to change the camera from a low cabinet view to an elevated overview.", "intent": "Adjust the SketchUp camera to inspect the kitchen layout.", "app": "SketchUp 2024", "details": "The model remained unchanged; the view shifted around the sink, cabinets, oven, and open door."}, {"start_s": 19440.862, "end_s": 19450.687, "action": "Orbited and zoomed around the kitchen, moving from the elevated overview to a close, low view of the sink cabinet and then back to a wider perspective.", "intent": "Inspect the kitchen model from multiple angles.", "app": "SketchUp 2024", "details": "No geometry edits were visible."}, {"start_s": 19450.687, "end_s": 19460.757, "action": "Canceled an active operation and issued repeated undo commands, then orbited and zoomed the model toward the sink and cabinetry.", "intent": "Review or revert recent SketchUp changes while repositioning the camera.", "app": "SketchUp 2024", "details": "The visible kitchen layout stayed essentially the same, with the camera settling on an elevated front view."}, {"start_s": 19460.757, "end_s": 19472.024, "action": "Scrolled and orbited around the sink area, zooming into the countertop and basin before returning to a wider kitchen view.", "intent": "Inspect the sink and surrounding cabinetry from different viewpoints.", "app": "SketchUp 2024", "details": "A Windows Explorer window resize event was recorded, but no Explorer content was shown; the SketchUp model was not visibly edited."}, {"start_s": 19472.024, "end_s": 19481.839, "action": "Zoomed progressively into the double sink and clicked repeatedly on the basin area, leaving the camera in a close-up view.", "intent": "Examine or select components of the sink model.", "app": "SketchUp 2024", "details": "The sink became closely framed; later clicks produced blue selection outlines on sink geometry."}, {"start_s": 19481.839, "end_s": 19491.846, "action": "Continued clicking the sink geometry, dragged across the close-up view to orbit, and clicked additional basin areas while slightly scrolling.", "intent": "Inspect or select sink components in detail.", "app": "SketchUp 2024", "details": "Blue outlines remained visible around the sink edges and interior lines, indicating selected geometry."}, {"start_s": 19491.846, "end_s": 19501.703, "action": "Clicked repeatedly, dragged, scrolled, and pressed Escape while navigating the kitchen model; then changed the camera from a close-up of the sink to a wider view of the cabinets and countertop.", "intent": "Adjust the 3D view and inspect the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 19501.703, "end_s": 19511.885, "action": "Scrolled and orbited around the kitchen sink area, moving from a wider cabinet view into an extreme close-up and then back to a close view of the sink and dish rack.", "intent": "Inspect the sink, backsplash, and countertop details from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 19511.885, "end_s": 19520.157, "action": "Orbited and zoomed out from the sink, briefly interacted with the view, and ended on an elevated overview showing the sink, dish rack, stove, cabinets, and refrigerator.", "intent": "Review the overall kitchen layout from an elevated perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 19520.157, "end_s": 19531.015, "action": "Remained on the kitchen model view with the sink, countertop, stove, and cabinets visible; near the end, moved and resized the Windows Explorer window without changing the SketchUp view.", "intent": "Pause on the model while adjusting the desktop window layout.", "app": "SketchUp 2024", "details": "Windows Explorer was moved and resized near the end of the span."}, {"start_s": 19531.015, "end_s": 19540.614, "action": "Scrolled and orbited around the sink and countertop, moving to a close overhead view and then settling on a wider angled view that included the stove and dish rack.", "intent": "Inspect the sink and adjacent countertop area from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 19540.614, "end_s": 19551.583, "action": "Scrolled and orbited outward and to the right, ending with a broad view of the complete kitchen including the sink, cabinets, stove, refrigerator, and countertops.", "intent": "Review the completed kitchen arrangement in an overall perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 19551.583, "end_s": 19566.963, "action": "Clicked and scrolled within the SketchUp kitchen model, changing the view from the kitchen cabinetry to a detached cooktop and hood assembly.", "intent": "Inspect different parts of the kitchen model.", "app": "SketchUp 2024", "details": "The view ended on the detached cooktop and hood components."}, {"start_s": 19566.963, "end_s": 19576.5, "action": "Clicked several model components and scrolled, selecting the detached hood, cabinet-like parts, and finally the cooktop assembly while changing the view.", "intent": "Select and inspect kitchen components.", "app": "SketchUp 2024", "details": "Blue selection outlines appeared around multiple detached components and then around the cooktop."}, {"start_s": 19576.5, "end_s": 19586.476, "action": "Scrolled and clicked the selected cooktop assembly, then moved it toward the kitchen counter; the view shifted closer to the sink-side countertop.", "intent": "Position the cooktop assembly in the kitchen layout.", "app": "SketchUp 2024", "details": "The cooktop remained selected and was shown near the counter by the sink."}, {"start_s": 19586.476, "end_s": 19592.171, "action": "Clicked and orbited the model, zooming out to review the complete L-shaped kitchen from wider angles.", "intent": "Review the kitchen layout and component placement.", "app": "SketchUp 2024", "details": "The full kitchen, including cabinetry, appliances, sink, and refrigerator, became visible."}, {"start_s": 19592.171, "end_s": 19612.171, "action": "Paused without recorded interaction while viewing the completed kitchen model.", "intent": "Review the current kitchen design.", "app": "SketchUp 2024", "details": null}, {"start_s": 19612.171, "end_s": 19619.963, "action": "Clicked the component-placement tool and scrolled; a small detached component appeared to the left of the kitchen model.", "intent": "Place another kitchen component in the scene.", "app": "SketchUp 2024", "details": "SketchUp displayed the status \u201cPlace component,\u201d with the detached component awaiting placement."}, {"start_s": 19619.963, "end_s": 19629.284, "action": "Pressed Escape, then scrolled to zoom out from a close kitchen view to a wider view of the modeled room.", "intent": "Adjust the camera to review the overall kitchen layout.", "app": "SketchUp 2024", "details": "Displayed cabinets, appliances, sink, counters, and refrigerator in a wider perspective."}, {"start_s": 19629.284, "end_s": 19639.389, "action": "Clicked and scrolled in the model viewport, orbiting and zooming from the full-room view toward the kitchen work area.", "intent": "Inspect the kitchen model from a closer angle.", "app": "SketchUp 2024", "details": "Ended on a close elevated view of the sink, counters, oven, cabinets, and refrigerator."}, {"start_s": 19639.389, "end_s": 19649.345, "action": "Scrolled and middle-dragged to orbit around the kitchen, moving from the sink close-up back to a broader perspective.", "intent": "Review the modeled kitchen from multiple viewpoints.", "app": "SketchUp 2024", "details": "The view shifted across the sink and oven area and ended with most of the kitchen visible."}, {"start_s": 19649.345, "end_s": 19660.603, "action": "Middle-dragged and repeatedly scrolled to orbit and zoom into the double sink and adjacent lower cabinets.", "intent": "Inspect the sink and surrounding cabinetry in detail.", "app": "SketchUp 2024", "details": "Ended on a close-up of the two sink basins, faucet, countertop, and cabinet handles."}, {"start_s": 19660.603, "end_s": 19670.185, "action": "Middle-dragged and scrolled away from the sink, zooming far out and then returning to a medium-wide kitchen view.", "intent": "Reframe the model for an overall layout review.", "app": "SketchUp 2024", "details": "The view briefly showed the entire model very small with a standing figure, then returned to the kitchen composition."}, {"start_s": 19670.185, "end_s": 19690.042, "action": "Adjusted the camera slightly, opened the Window menu, and moved to the Libraries/Settings area before SketchUp was hidden.", "intent": "Access SketchUp window or library settings.", "app": "SketchUp 2024", "details": "The Window menu remained open with items including Default Tray, Manage Trays, Preferences, 3D Warehouse, and LibFredo6 Settings."}, {"start_s": 19690.042, "end_s": 19698.61, "action": "Opened the SketchUp 3D Warehouse and edited the search field, clearing the existing text and beginning a new query.", "intent": "Prepare a new 3D Warehouse search.", "app": "SketchUp 2024", "details": "The field visibly contained \u201ckitchen window\u201d after the initial editing."}, {"start_s": 19698.61, "end_s": 19709.058, "action": "Continued typing in the 3D Warehouse search field, changing the query toward \u201cdining table.\u201d", "intent": "Enter a dining-table model search query.", "app": "SketchUp 2024", "details": "The field visibly showed \u201cdaining\u201d during the span and results were displayed."}, {"start_s": 19709.058, "end_s": 19719.857, "action": "Corrected the search text and completed \u201cdining table,\u201d then clicked the search button.", "intent": "Search the warehouse for dining table models.", "app": "SketchUp 2024", "details": "The completed query \u201cdining table\u201d was visible; the results view still showed prior cards at capture."}, {"start_s": 19719.857, "end_s": 19732.242, "action": "Scrolled through the dining-table search results and opened a model detail page titled \u201cDining table.\u201d", "intent": "Review available dining-table models and inspect one result.", "app": "SketchUp 2024", "details": "The detail page showed the model by Mohamed R., preview thumbnails, and View In AR and Download buttons."}, {"start_s": 19732.242, "end_s": 19742.241, "action": "Scrolled through the opened model page, then returned to the 3D Warehouse results view.", "intent": "Review the model page and return to search results.", "app": "SketchUp 2024", "details": "The results view later showed dining-table cards and a sponsored banner."}, {"start_s": 19742.241, "end_s": 19753.579, "action": "Continued scrolling through the dining-table search results after the Warehouse window was hidden.", "intent": "Browse additional dining-table models.", "app": "SketchUp 2024", "details": "The visible results included \u201cdaining table with chairs 6\u201d and \u201cDINNING TABLE.\u201d"}, {"start_s": 19753.579, "end_s": 19764.516, "action": "Scrolled through the 3D Warehouse results for \u201cdaining table,\u201d then clicked in the search field twice.", "intent": "Review search results and adjust the query field.", "app": "SketchUp 2024", "details": "Results included dining-table models such as \u201cdaining table with chairs 6\u201d and \u201cDINNING TABLE.\u201d"}, {"start_s": 19764.516, "end_s": 19773.769, "action": "Deleted one character, clicked in the search field, entered \u201cn,\u201d and clicked the search button; the results changed to loading placeholders.", "intent": "Correct and resubmit the 3D Warehouse search query.", "app": "SketchUp 2024", "details": "The search field visibly showed \u201cdining table\u201d before the search was submitted."}, {"start_s": 19773.769, "end_s": 19782.155, "action": "Scrolled down through the refreshed 3D Warehouse results, revealing additional dining-table model cards.", "intent": "Browse more matching models.", "app": "SketchUp 2024", "details": "Visible cards included \u201cdinning table\u201d entries with different table-and-chair previews."}, {"start_s": 19782.155, "end_s": 19789.603, "action": "Continued scrolling through the search results to later dining-table listings.", "intent": "Continue reviewing available models.", "app": "SketchUp 2024", "details": "Listings included \u201cDinning Table\u201d and \u201cdinning table\u201d cards from different creators."}, {"start_s": 19789.603, "end_s": 19798.763, "action": "Scrolled further through the results, passing models labeled \u201cDINNING TABLE,\u201d including table-and-chair arrangements and a geolocated listing.", "intent": "Inspect additional search results.", "app": "SketchUp 2024", "details": "No model was opened or downloaded."}, {"start_s": 19798.763, "end_s": 19811.418, "action": "Performed a long downward scroll through more dining-table results, ending on additional table-and-chair model cards.", "intent": "Continue browsing the result set for a suitable model.", "app": "SketchUp 2024", "details": "The final visible listings included \u201cdinning table\u201d and \u201cDINNING TABLE\u201d models with varied seating arrangements."}, {"start_s": 19811.418, "end_s": 19822.771, "action": "Scrolled down through the 3D Warehouse results for \u201cdinning table,\u201d moving past multiple table model cards.", "intent": "Browse additional dining table models.", "app": "SketchUp 2024", "details": "3D Warehouse search results remained open."}, {"start_s": 19822.771, "end_s": 19830.939, "action": "Continued scrolling through the \u201cdinning table\u201d model results and reviewed additional table-and-chair thumbnails.", "intent": "Continue browsing available models.", "app": "SketchUp 2024", "details": "No model was opened during this interval."}, {"start_s": 19830.939, "end_s": 19840.058, "action": "Scrolled farther down the search results, passing more dining table model cards with varied table and chair designs.", "intent": "Inspect more search results.", "app": "SketchUp 2024", "details": "The results list advanced to later entries."}, {"start_s": 19840.058, "end_s": 19847.762, "action": "Continued scrolling through the 3D Warehouse results and reviewed additional dining table thumbnails and titles.", "intent": "Browse further model options.", "app": "SketchUp 2024", "details": "No selection or download was visibly completed."}, {"start_s": 19847.762, "end_s": 19855.443, "action": "Scrolled down through more \u201cdinning table\u201d results, exposing additional models including long rectangular tables and furnished dining sets.", "intent": "Continue reviewing model choices.", "app": "SketchUp 2024", "details": "Search results remained in the Models tab."}, {"start_s": 19855.443, "end_s": 19868.626, "action": "Scrolled through the results, then clicked a model result control; switched back to SketchUp and displayed the \u201cLoad Into Model?\u201d window.", "intent": "Load a selected 3D Warehouse model into the SketchUp document.", "app": "SketchUp 2024", "details": "The final app transition opened a load confirmation window."}, {"start_s": 19868.626, "end_s": 19873.403, "action": "Switched to the 3D Warehouse download dialog for a dining table model and waited while the download progressed to about 85%, then returned to the Warehouse window.", "intent": "Download a dining table component from 3D Warehouse.", "app": "SketchUp", "details": "Download Progress dialog was visible over the 3D Warehouse search results."}, {"start_s": 19873.403, "end_s": 19883.076, "action": "Returned to the KITCHEN2 SketchUp model, scrolled through the view, and clicked in the modeling area.", "intent": "Adjust the model view after returning from the component download.", "app": "SketchUp", "details": "The kitchen layout remained visible while the camera view changed to a more distant angle."}, {"start_s": 19883.076, "end_s": 19892.006, "action": "Changed the camera view with middle-button navigation and scrolling, orbiting around the kitchen until the dining table and chair arrangement appeared beside it.", "intent": "Inspect the kitchen and dining-area arrangement from different angles.", "app": "SketchUp", "details": "A dining set and a standing figure became visible in the model view."}, {"start_s": 19892.006, "end_s": 19902.126, "action": "Continued navigating the model view and zoomed toward the dining set, leaving the table-and-chairs group selected with a blue bounding box.", "intent": "Inspect the imported dining set and its placement near the kitchen.", "app": "SketchUp", "details": "The selected dining set occupied the right side of the modeling area."}, {"start_s": 19902.126, "end_s": 19912.654, "action": "Typed a space and used navigation gestures and scrolling to zoom back out, leaving the dining set visible beside the kitchen without its selection box.", "intent": "Review the overall placement of the dining set relative to the kitchen.", "app": "SketchUp", "details": "The final view showed the kitchen and separated dining table arrangement from an elevated angle."}, {"start_s": 19912.654, "end_s": 19922.51, "action": "Navigated and zoomed into the dining table, then clicked and dragged around the group, leaving the table, chairs, plant, and tea set selected in a close-up view.", "intent": "Inspect or select elements of the dining set.", "app": "SketchUp", "details": "The close-up showed the dining group outlined in blue."}, {"start_s": 19922.51, "end_s": 19932.308, "action": "Clicked and dragged in the SketchUp model, scrolled through the view, then orbited to reveal the kitchen and dining area from a wider angle.", "intent": "Inspect and navigate the 3D interior model.", "app": "SketchUp", "details": "The view changed from a close-up of dining chairs to a wider view of the kitchen and dining set."}, {"start_s": 19932.308, "end_s": 19942.156, "action": "Clicked and dragged around the model, used middle-button navigation and scrolling, and selected the dining table-and-chairs group.", "intent": "Reposition the camera and select the dining furniture assembly.", "app": "SketchUp", "details": "The dining furniture became outlined in blue in the final view."}, {"start_s": 19942.156, "end_s": 19952.31, "action": "Typed briefly, clicked the selected dining group, navigated the view, and began moving the selected furniture assembly.", "intent": "Adjust the position of the dining furniture group.", "app": "SketchUp", "details": "The dining set remained selected and the Move tool showed a movement distance while the camera shifted to a wider perspective."}, {"start_s": 19952.31, "end_s": 19961.995, "action": "Used middle-button navigation and scrolling to orbit and zoom around the kitchen scene, leaving the dining set visible without an active selection outline.", "intent": "Review the model from different viewpoints.", "app": "SketchUp", "details": "The camera moved from an elevated wide view to a closer front-right view of the kitchen and dining area."}, {"start_s": 19961.995, "end_s": 19971.804, "action": "Navigated the camera, clicked the dining furniture group to select it, typed briefly, and activated the Rotate tool around the selected group.", "intent": "Prepare to rotate the dining furniture assembly.", "app": "SketchUp", "details": "The group was outlined in blue and a rotation protractor appeared near the dining set."}, {"start_s": 19971.804, "end_s": 19980.918, "action": "Clicked to set a rotation point or angle, then scrolled and continued rotating the selected dining group while zooming out.", "intent": "Rotate and reposition the dining furniture group within the room.", "app": "SketchUp", "details": "The selected dining set visibly changed orientation and moved toward the kitchen-side area as the angle readout advanced."}, {"start_s": 19980.918, "end_s": 19991.278, "action": "Entered 90 and confirmed it, then orbited the selected kitchen dining group view.", "intent": "Adjust the active rotation angle and inspect the model from another angle.", "app": "SketchUp 2024", "details": "The Angle field shows 90.0 and the dining group remains selected."}, {"start_s": 19991.278, "end_s": 20001.181, "action": "Activated the Move tool and repositioned the selected kitchen dining group toward the right, confirming the new placement.", "intent": "Move the selected modeled group within the kitchen scene.", "app": "SketchUp 2024", "details": "The selected group shifts rightward and the distance field updates during placement."}, {"start_s": 20001.181, "end_s": 20015.254, "action": "Orbited and zoomed out around the kitchen model, changing from a close view to a distant overall view.", "intent": "Inspect the model layout from broader viewpoints.", "app": "SketchUp 2024", "details": "The full kitchen and dining area becomes smaller in the viewport."}, {"start_s": 20015.254, "end_s": 20026.278, "action": "Orbited and zoomed back toward the dining table, moving from the distant overview to close interior perspectives.", "intent": "Review the dining arrangement and surrounding kitchen details.", "app": "SketchUp 2024", "details": "The table, chairs, kitchen counters, appliances, and decorations are inspected from multiple angles."}, {"start_s": 20026.278, "end_s": 20037.892, "action": "Zoomed toward the dining table, activated component placement, and selected the flower vase on the tabletop.", "intent": "Prepare to reposition a tabletop decorative component.", "app": "SketchUp 2024", "details": "A flower vase becomes selected with a blue bounding box."}, {"start_s": 20037.892, "end_s": 20048.111, "action": "Moved the selected potted plant from the tabletop toward the right side near the refrigerator, using repeated placement clicks and viewport adjustments.", "intent": "Reposition the selected decorative plant in the kitchen scene.", "app": "SketchUp 2024", "details": "The plant is shown selected first on the table and later positioned beside the dining area."}, {"start_s": 20048.111, "end_s": 20058.366, "action": "Adjusted the SketchUp camera around the kitchen model by clicking, dragging, and scrolling, ending on a wider view of the room.", "intent": "Inspect the kitchen scene from different angles and scales.", "app": "SketchUp 2024", "details": null}, {"start_s": 20058.366, "end_s": 20066.908, "action": "Orbited the SketchUp camera around the kitchen model to change from a closer view to a more centered perspective.", "intent": "Review the modeled kitchen layout from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 20066.908, "end_s": 20079.333, "action": "Paused on the kitchen model, then scrolled and orbited to zoom out to a smaller overall view.", "intent": "Inspect the complete room composition.", "app": "SketchUp 2024", "details": null}, {"start_s": 20079.333, "end_s": 20098.731, "action": "Continued orbiting and zooming around the kitchen model, then opened the 3D Warehouse window from SketchUp.", "intent": "Review the model and access 3D Warehouse content.", "app": "SketchUp 2024", "details": "The view ended with the 3D Warehouse window active."}, {"start_s": 20098.731, "end_s": 20118.439, "action": "Browsed and scrolled 3D Warehouse search results for \u201cdinning table,\u201d then selected a result to load into the SketchUp model.", "intent": "Find a dining table component for the kitchen scene.", "app": "3D Warehouse", "details": "A \u201cLoad Into Model?\u201d transition appeared after selecting the result."}, {"start_s": 20118.439, "end_s": 20131.502, "action": "Started downloading the selected dining table component, returned to SketchUp, and scrolled the model view while positioning the component for placement.", "intent": "Import and place a dining table component in the kitchen model.", "app": "SketchUp 2024", "details": "The imported table is visible to the left of the kitchen scene."}, {"start_s": 20131.502, "end_s": 20141.3, "action": "Orbited and zoomed the SketchUp camera from the overall kitchen-and-dining model toward the dining table and chairs.", "intent": "Inspect the dining furniture and table setting from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 20141.3, "end_s": 20151.974, "action": "Continued orbiting and zooming around the dining table, bringing the place settings, glasses, centerpiece, and surrounding chairs into view.", "intent": "Review details of the dining table arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 20151.974, "end_s": 20162.035, "action": "Zoomed back to show the dining table beside the kitchen, then adjusted the view to a wider overall perspective.", "intent": "Compare the dining table placement with the adjacent kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 20162.035, "end_s": 20171.557, "action": "Selected the potted plant and dragged it while orbiting around the dining table, leaving the plant selected in a new visible position near the table.", "intent": "Reposition the dining-area plant within the model.", "app": "SketchUp 2024", "details": "The plant remained highlighted with a blue bounding box; the move tool distance field was visible."}, {"start_s": 20171.557, "end_s": 20181.615, "action": "Activated move on the selected plant, adjusted the camera through close and wide views, and continued navigating around the dining set.", "intent": "Inspect or refine the plant placement relative to the table.", "app": "SketchUp 2024", "details": "The plant was selected during the close view and the model returned to a wider kitchen-and-dining perspective."}, {"start_s": 20181.615, "end_s": 20190.733, "action": "Orbited and zoomed around the dining table, ending on an elevated view showing the table setting, centerpiece plant, plates, glasses, and chairs.", "intent": "Review the completed dining-table arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 20190.733, "end_s": 20200.405, "action": "Orbited and zoomed around the dining table, then clicked repeatedly near the flower centerpiece and selected it, leaving the plant outlined in blue.", "intent": "Inspect and select the dining-table centerpiece.", "app": "SketchUp 2024", "details": "Dining table model with place settings, glasses, chairs, and a flower pot was viewed from changing angles."}, {"start_s": 20200.405, "end_s": 20210.237, "action": "Repositioned the selected centerpiece with the Move tool, entered \u201cm,\u201d adjusted the view, and zoomed out to show the complete dining table.", "intent": "Move or adjust the flower centerpiece while checking its placement.", "app": "SketchUp 2024", "details": "The flower pot remained selected during the close view; the later view showed the full table arrangement."}, {"start_s": 20210.237, "end_s": 20222.631, "action": "Orbited and zoomed farther out from the dining table to reveal the surrounding kitchen scene and the separate table arrangement.", "intent": "Review the placement of the dining-table model within the larger kitchen layout.", "app": "SketchUp 2024", "details": "The view progressed from the isolated table to a wider room and kitchen model."}, {"start_s": 20222.631, "end_s": 20232.47, "action": "Zoomed out and orbited slightly, keeping the kitchen and separate dining table visible while inspecting their overall arrangement.", "intent": "Inspect the relative placement of the two furnished dining areas.", "app": "SketchUp 2024", "details": "The final view showed the kitchen room on the left and the separate black dining table on the right."}, {"start_s": 20232.47, "end_s": 20242.893, "action": "Zoomed in toward the kitchen model and clicked near the central kitchen dining table.", "intent": "Refocus the scene on the kitchen and its dining area.", "app": "SketchUp 2024", "details": "The kitchen became larger in view while the separate black table remained visible at right."}, {"start_s": 20242.893, "end_s": 20252.535, "action": "Clicked repeatedly on the dining-room models, selecting groups so blue bounding boxes appeared, then orbited and changed the view to inspect the selected geometry.", "intent": "Select and inspect dining-room components or groups in the SketchUp model.", "app": "SketchUp 2024", "details": "The final view displayed transparent scene geometry and selection outlines around the kitchen dining area and the separate table."}, {"start_s": 20252.535, "end_s": 20262.223, "action": "Navigated around the SketchUp kitchen scene with repeated orbit/zoom inputs, then selected the dining-table centerpiece plant; the view ended in a close-up with the plant highlighted.", "intent": "Inspect and select the dining-table plant component.", "app": "SketchUp 2024", "details": null}, {"start_s": 20262.223, "end_s": 20271.861, "action": "Adjusted the camera and clicked through the kitchen model, then selected the kitchen dining set; the table and chairs became enclosed by a blue selection box.", "intent": "Select the kitchen dining table and chairs as a group.", "app": "SketchUp 2024", "details": null}, {"start_s": 20271.861, "end_s": 20282.037, "action": "Zoomed far out, engaged the Move tool, and dragged the selected dining set across the scene toward the kitchen area.", "intent": "Move the selected dining set into position near the kitchen.", "app": "SketchUp 2024", "details": null}, {"start_s": 20282.037, "end_s": 20291.311, "action": "Continued dragging and placing the selected dining set, then adjusted the camera with orbit/zoom inputs; the set appeared positioned inside the kitchen room and was no longer selected.", "intent": "Place the dining set in the kitchen and review its position.", "app": "SketchUp 2024", "details": null}, {"start_s": 20291.311, "end_s": 20303.351, "action": "Zoomed in toward the positioned dining table, bringing the kitchen cabinets, refrigerator, place settings, and chairs into a closer view.", "intent": "Inspect the completed dining-area arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 20303.351, "end_s": 20312.863, "action": "Continued zooming and orbiting around the dining table, ending on a close inspection of the plates and wine glasses on the tabletop.", "intent": "Review the dining table details and table setting.", "app": "SketchUp 2024", "details": null}, {"start_s": 20312.863, "end_s": 20323.831, "action": "Scrolled repeatedly to zoom out from the kitchen model, leaving the kitchen and a separate dining table visible in the SketchUp workspace.", "intent": "Adjusted the model view to inspect more of the scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 20323.831, "end_s": 20333.167, "action": "Zoomed and adjusted the camera around the kitchen, then clicked the dining set so the table and chairs became selected with blue outlines.", "intent": "Focused on and selected the kitchen dining set.", "app": "SketchUp 2024", "details": null}, {"start_s": 20333.167, "end_s": 20343.094, "action": "Activated the Rotate tool and dragged the selected dining set to rotate it, leaving an angle value of approximately -8.6 degrees.", "intent": "Rotated the selected dining set within the kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 20343.094, "end_s": 20351.848, "action": "Scrolled to zoom farther out while the dining set remained selected, changing the view to show the kitchen, the separate table, and a standing human figure.", "intent": "Reviewed the rotated set in the broader scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 20351.848, "end_s": 20362.077, "action": "Entered 90 in the active angle field and confirmed it, then restored the SketchUp window and zoomed or orbited out to a smaller overall view.", "intent": "Applied a numeric rotation angle and resumed inspecting the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 20362.077, "end_s": 20374.557, "action": "Adjusted the camera, selected or manipulated the dining set, and moved it within the kitchen area; the final view showed the set selected in a repositioned arrangement near the kitchen.", "intent": "Repositioned the dining set in the kitchen model.", "app": "SketchUp 2024", "details": null}, {"start_s": 20374.557, "end_s": 20387.317, "action": "Orbited and zoomed out around the SketchUp kitchen-and-dining model, changing from a closer view to a wider overall view.", "intent": "Inspect the model from a broader angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 20387.317, "end_s": 20397.381, "action": "Orbited and zoomed around the model, bringing the kitchen and dining table into a closer, more centered view.", "intent": "Adjust the camera to inspect the interior arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 20397.381, "end_s": 20406.837, "action": "Zoomed and orbited toward the kitchen and dining area, then selected the dining table-and-chairs assembly.", "intent": "Inspect and select the dining furniture group.", "app": "SketchUp 2024", "details": "The dining assembly was highlighted with a blue selection outline by the end of the span."}, {"start_s": 20406.837, "end_s": 20418.333, "action": "Applied a scale operation to the selected dining assembly, then orbited and deselected it to review the revised scene.", "intent": "Resize the dining furniture arrangement and check the result.", "app": "SketchUp 2024", "details": "The Scale tool showed a value of 0.86 while the assembly was selected."}, {"start_s": 20418.333, "end_s": 20428.277, "action": "Zoomed in, moved the selected dining assembly, and then deselected it while adjusting the view.", "intent": "Reposition the dining furniture within the kitchen scene.", "app": "SketchUp 2024", "details": "The Move tool was active during the furniture adjustment."}, {"start_s": 20428.277, "end_s": 20440.205, "action": "Orbited around the kitchen model and settled on a front-facing perspective showing the dining table, chairs, cabinets, appliances, and separate table at left.", "intent": "Review the final furniture placement from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 20440.205, "end_s": 20449.597, "action": "Adjusted the SketchUp camera with middle-clicks and scrolls, orbiting from a close kitchen-and-dining view to a wider view of the room.", "intent": "Review the overall kitchen and dining-room model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 20449.597, "end_s": 20463.679, "action": "Clicked and scrolled to orbit and zoom toward the kitchen, ending on a closer view of the sink, counters, stove, refrigerator, and dining table.", "intent": "Inspect the kitchen area and its furnishings from a closer perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 20463.679, "end_s": 20473.256, "action": "Repeatedly clicked the cooktop assembly, typed \u201cm,\u201d and dragged the selected cooktop-and-pot group toward the right along the counter.", "intent": "Move the cooktop assembly within the kitchen model.", "app": "SketchUp 2024", "details": "The selected cooktop and cookware are shown with a bounding box and Move tool controls."}, {"start_s": 20473.256, "end_s": 20483.504, "action": "Scrolled and orbited through the model, then clicked to place the selected cookware assembly on the dining table.", "intent": "Position the cooktop-and-cookware assembly on the dining table.", "app": "SketchUp 2024", "details": "The selected assembly is visible above the table during the placement operation."}, {"start_s": 20483.504, "end_s": 20493.641, "action": "Scrolled and adjusted the view around the dining table, clicked the cookware assembly, and dragged it while the Move tool remained active.", "intent": "Inspect and further adjust the cookware assembly\u2019s placement on the table.", "app": "SketchUp 2024", "details": "A tooltip indicated the endpoint was outside the active context during the move."}, {"start_s": 20493.641, "end_s": 20503.744, "action": "Dragged and orbited around the dining table, clicking and scrolling to inspect the placed cookware; ended on a close-up showing the pot and kettle among the table settings.", "intent": "Review the final placement of the cookware on the dining table.", "app": "SketchUp 2024", "details": null}, {"start_s": 20503.744, "end_s": 20513.133, "action": "Clicked repeatedly on the cookware area, scrolled, and left the pot selected with a blue bounding box while the SketchUp view shifted slightly.", "intent": "Inspect or select the pot object in the kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 20513.133, "end_s": 20522.482, "action": "Scrolled and clicked around the kettle, briefly dragged, and left the kettle selected with a blue bounding box.", "intent": "Inspect or select the kettle object.", "app": "SketchUp 2024", "details": null}, {"start_s": 20522.482, "end_s": 20530.887, "action": "Clicked and scrolled to zoom out and reposition the camera, changing from a close tabletop view to a wider view of the dining and kitchen area.", "intent": "Review the overall kitchen scene and object placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 20530.887, "end_s": 20540.855, "action": "Scrolled and dragged around the kitchen, then changed the display to a shaded, high-contrast view showing the dining table, chairs, cabinets, and appliances.", "intent": "Navigate and inspect the modeled kitchen environment.", "app": "SketchUp 2024", "details": null}, {"start_s": 20540.855, "end_s": 20551.33, "action": "Scrolled and clicked around the tabletop objects, selected the pot-and-kettle group with a blue bounding box, and began moving it; the distance readout appeared in the status bar.", "intent": "Reposition the cookware group on the dining table.", "app": "SketchUp 2024", "details": "A typed 'm' key event occurred during the move operation."}, {"start_s": 20551.33, "end_s": 20560.664, "action": "Scrolled closer to the selected cookware, clicked to adjust its position, and orbited the camera around the table to a low view behind the chairs.", "intent": "Continue positioning the selected cookware and inspect it from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 20560.664, "end_s": 20570.72, "action": "Adjusted the SketchUp camera by scrolling and orbiting around the dining table, changing from a close overhead view to a wider view of the table setting.", "intent": "Inspect the modeled dining arrangement from different viewpoints.", "app": "SketchUp 2024", "details": "Viewed plates, glasses, a pot, and a teapot on the dining table."}, {"start_s": 20570.72, "end_s": 20580.936, "action": "Selected the dark pot, typed a move command, and dragged it to a new position on the tabletop while keeping it highlighted with a bounding box.", "intent": "Reposition the pot within the table setting.", "app": "SketchUp 2024", "details": "The pot remained selected and was visibly moved across the tabletop."}, {"start_s": 20580.936, "end_s": 20591.239, "action": "Selected and moved the white teapot, then orbited and zoomed the camera outward to review the arrangement in the larger kitchen scene.", "intent": "Reposition the teapot and inspect the overall placement.", "app": "SketchUp 2024", "details": "The teapot was highlighted during movement; the final view showed the full dining area."}, {"start_s": 20591.239, "end_s": 20601.099, "action": "Orbited and zoomed back toward the dining table, then adjusted the camera to a closer angled view of the completed table setting.", "intent": "Review the table arrangement from a closer perspective.", "app": "SketchUp 2024", "details": "The view changed from the wider kitchen scene to a detailed view of the dark tabletop, place settings, pot, and teapot."}, {"start_s": 20601.099, "end_s": 20606.656, "action": "Selected a stemmed glass near the center of the table and dragged it to a new position in front of the pot, leaving it selected.", "intent": "Reposition the glass within the table setting.", "app": "SketchUp 2024", "details": "The selected glass moved from beside the pot toward the foreground."}, {"start_s": 20606.656, "end_s": 20616.872, "action": "Continued positioning the selected stemmed glass with a drag and left it highlighted near the front-center of the tabletop.", "intent": "Fine-tune the glass placement.", "app": "SketchUp 2024", "details": "The glass remained selected with the move tool active."}, {"start_s": 20616.872, "end_s": 20626.959, "action": "Selected and repositioned a stemmed glass on the dining table, moving it from the right side toward the upper place setting.", "intent": "Adjust the placement of a tableware object in the dining scene.", "app": "SketchUp 2024", "details": "A blue selection outline and move-distance readout appeared on the glass."}, {"start_s": 20626.959, "end_s": 20637.226, "action": "Zoomed in on the dining table, selected the moved stemmed glass, and continued positioning it near the upper-right place setting.", "intent": "Refine the glass placement while inspecting the table arrangement.", "app": "SketchUp 2024", "details": "The view changed from a wide table view to a close-up, with the glass selected in blue."}, {"start_s": 20637.226, "end_s": 20646.584, "action": "Selected and moved a stemmed glass toward the left-front side of the table, then orbited the camera to inspect the arrangement from a wider angle.", "intent": "Place another glass and review the overall table setting.", "app": "SketchUp 2024", "details": "The final view showed the complete table with the moved glass selected near the left side."}, {"start_s": 20646.584, "end_s": 20655.098, "action": "Orbited and zoomed the camera around the dining table, reviewing the place settings, glasses, pot, and teapot from overhead angles.", "intent": "Inspect the completed table arrangement from multiple viewpoints.", "app": "SketchUp 2024", "details": "No object remained visibly selected in the evidence views."}, {"start_s": 20655.098, "end_s": 20664.282, "action": "Adjusted the camera with orbit and zoom controls, changing from an overhead view to a wider frontal view of the dining table.", "intent": "Set a clear overall viewing angle for the modeled dining scene.", "app": "SketchUp 2024", "details": "The table and chairs remained unchanged while the viewpoint shifted."}, {"start_s": 20664.282, "end_s": 20674.248, "action": "Selected and repositioned the stemmed glass at the right-front place setting, then zoomed and orbited outward to review the full table.", "intent": "Fine-tune the final glass placement and inspect the completed scene.", "app": "SketchUp 2024", "details": "The glass was outlined in blue during movement; the final view showed the full table from above."}, {"start_s": 20674.248, "end_s": 20684.25, "action": "Selected and moved small tableware objects around the dining table, using clicks, drags, and move-mode keyboard input while adjusting the view.", "intent": "Arrange table decorations and place individual objects on the tabletop.", "app": "SketchUp 2024", "details": "Dining table with plates, glasses, and serving pieces remained visible; a small object was selected for movement."}, {"start_s": 20684.25, "end_s": 20694.033, "action": "Continued selecting and repositioning small tableware components around the central serving pieces, then orbiting or zooming the camera for a closer view.", "intent": "Refine the placement of dining-table objects.", "app": "SketchUp 2024", "details": "Selected objects appeared with blue bounding boxes during move operations."}, {"start_s": 20694.033, "end_s": 20704.999, "action": "Selected and adjusted additional tabletop objects, navigated around the model, and zoomed out to review the fully furnished dining area and kitchen.", "intent": "Review the overall dining-room arrangement after object placement.", "app": "SketchUp 2024", "details": "The view progressed from a close table view to a wider kitchen-and-dining composition."}, {"start_s": 20704.999, "end_s": 20714.522, "action": "Navigated the model with repeated scrolls, selected a decorative potted plant, and dragged it to a new position near the dining table.", "intent": "Place the plant decoration within the dining area.", "app": "SketchUp 2024", "details": "The plant was visibly selected with a blue bounding box and move guides."}, {"start_s": 20714.522, "end_s": 20724.672, "action": "Zoomed and repositioned the camera around the dining table, then selected the potted plant and began moving it while reviewing its placement.", "intent": "Fine-tune the plant's position relative to the table setting.", "app": "SketchUp 2024", "details": "The plant remained selected above the tabletop; orbit mode was active near the end."}, {"start_s": 20724.672, "end_s": 20735.599, "action": "Navigated to a close tabletop view, selected the potted plant, and dragged it across the table toward the center arrangement.", "intent": "Continue positioning the plant among the table decorations.", "app": "SketchUp 2024", "details": "The plant was selected with a blue bounding box and visible move handles beside the central dishes and teapot."}, {"start_s": 20735.599, "end_s": 20748.184, "action": "Orbited and scrolled around the kitchen and dining-room model, then adjusted the camera to a higher angled view of the table and cabinets.", "intent": "Inspect the overall 3D interior arrangement from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 20748.184, "end_s": 20757.176, "action": "Zoomed in toward the dining table, selected the blue glass vase, and began moving it with the Move tool.", "intent": "Position the vase or inspect its placement on the table.", "app": "SketchUp 2024", "details": "The vase is selected with a blue bounding box and Move tool distance readout."}, {"start_s": 20757.176, "end_s": 20766.239, "action": "Moved the selected vase across the tabletop and adjusted the view, leaving the vase selected among the place settings.", "intent": "Reposition the centerpiece within the dining-table arrangement.", "app": "SketchUp 2024", "details": "The view ends above the table with the vase and flowers selected."}, {"start_s": 20766.239, "end_s": 20775.959, "action": "Orbited and zoomed to a low close view of the table, then selected and moved the vase toward the rear place setting.", "intent": "Refine the centerpiece position relative to the plates and cookware.", "app": "SketchUp 2024", "details": "The vase remains selected with a blue outline and Move tool active."}, {"start_s": 20775.959, "end_s": 20786.352, "action": "Orbited around the tabletop and zoomed closer, inspecting the vase, plates, glasses, teapot, and bowl from several angles.", "intent": "Review the table setting and centerpiece placement.", "app": "SketchUp 2024", "details": "The final view is an extreme close-up of the vase base and nearby tableware."}, {"start_s": 20786.352, "end_s": 20795.007, "action": "Selected the vase and moved it downward and across the tabletop while maintaining a close-up view.", "intent": "Continue repositioning the centerpiece on the dining table.", "app": "SketchUp 2024", "details": "The vase is visibly selected with the Move tool and a changing distance readout."}, {"start_s": 20795.007, "end_s": 20805.903, "action": "Navigated around the SketchUp kitchen and dining-room model with repeated orbit/scroll inputs, then zoomed into the dining table and selected the flower vase area.", "intent": "Inspect and position the camera on the dining-table arrangement.", "app": "SketchUp 2024", "details": "The view changed from a wide room view to a close-up of the tableware and vase."}, {"start_s": 20805.903, "end_s": 20819.495, "action": "Entered a move operation and adjusted the selected dining-table object or vase area while orbiting and zooming around the tabletop.", "intent": "Reposition or inspect an object on the dining table.", "app": "SketchUp 2024", "details": "The close-up remained focused on the vase, plates, pot, and teapot; selection and move handles were visible."}, {"start_s": 20819.495, "end_s": 20829.208, "action": "Orbited and zoomed back from the tabletop close-up to review the complete kitchen and dining area, with a brief interaction near the table.", "intent": "Review the model layout from a broader perspective.", "app": "SketchUp 2024", "details": "The final view showed the kitchen cabinetry, appliances, dining table, and chairs."}, {"start_s": 20829.208, "end_s": 20843.513, "action": "Paused on the kitchen model, then zoomed far out to frame the room as a small overall scene.", "intent": "Adjust the overall camera framing for the model.", "app": "SketchUp 2024", "details": "The view transitioned from a medium kitchen view to a distant view of the room shell."}, {"start_s": 20843.513, "end_s": 20859.96, "action": "Continued zooming out and orbiting around the kitchen model, progressively reducing it in the viewport.", "intent": "Inspect the scene from a distant overall view.", "app": "SketchUp 2024", "details": "The kitchen became smaller while the surrounding SketchUp axes and workspace occupied more of the view."}, {"start_s": 20859.96, "end_s": 20870.538, "action": "Orbited and zoomed the distant scene to reveal both the kitchen/dining room and the separate dining table at left.", "intent": "Review the spatial arrangement of the modeled furniture and rooms.", "app": "SketchUp 2024", "details": "The final view clearly showed the kitchen room on the right and a separate table-and-chairs grouping on the left."}, {"start_s": 20870.538, "end_s": 20880.401, "action": "Orbited and zoomed the SketchUp camera around the kitchen and dining-room model, moving from a distant overview to a closer interior view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 20880.401, "end_s": 20891.215, "action": "Continued orbiting and zooming around the kitchen, cabinets, appliances, and dining table, ending on a close angled view.", "intent": "Review the modeled kitchen and dining area from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 20891.215, "end_s": 20900.032, "action": "Zoomed out and orbited to show the kitchen separately from the selected dining-table assembly, then changed to a more distant front view.", "intent": "Inspect the overall scene and the separate dining assembly.", "app": "SketchUp 2024", "details": "The dining-table assembly was visibly selected in blue in the intermediate view."}, {"start_s": 20900.032, "end_s": 20909.991, "action": "Orbited the model through several elevated and frontal views, keeping the kitchen and dining table visible.", "intent": "Review the overall 3D arrangement from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 20909.991, "end_s": 20919.657, "action": "Continued orbiting around the kitchen and dining area and adjusted the view toward a wider angled perspective.", "intent": "Inspect the completed scene from additional angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 20919.657, "end_s": 20939.657, "action": "Made a small view adjustment and then left the SketchUp scene displayed in a stable close angled view of the kitchen and dining table.", "intent": "Settle on a final inspection view of the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 20939.657, "end_s": 20959.657, "action": "Remained idle while the SketchUp kitchen and dining-room model stayed visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 20959.657, "end_s": 20967.599, "action": "Scrolled and middle-clicked in the modeling area to adjust the camera, then clicked repeatedly near the front floor edge; changed the view to a more elevated, zoomed-out perspective and left the floor edge selected.", "intent": "Adjust the 3D view and select geometry near the floor edge.", "app": "SketchUp 2024", "details": "The final view shows the kitchen from above with the front floor/base edge highlighted."}, {"start_s": 20967.599, "end_s": 20977.582, "action": "Typed shortcut keys, clicked and scrolled in the model, then used Push/Pull on the front floor face; zoomed out and left the face active with a distance value shown.", "intent": "Modify the selected floor/base geometry using Push/Pull.", "app": "SketchUp 2024", "details": "The status bar shows Push/Pull mode and the selected front floor face is visibly active."}, {"start_s": 20977.582, "end_s": 20987.595, "action": "Middle-clicked and scrolled to orbit and reposition the camera, then clicked repeatedly near the front base edge and typed a shortcut; changed to a lower angled view of the kitchen model.", "intent": "Inspect the edited base from different viewpoints.", "app": "SketchUp 2024", "details": "The camera moves around the model while the kitchen and dining set remain visible."}, {"start_s": 20987.595, "end_s": 20997.272, "action": "Clicked the front floor/base area, typed a space, clicked elsewhere, and scrolled and middle-clicked to navigate the model; kept the base face active in Push/Pull mode.", "intent": "Continue editing or inspecting the floor/base geometry.", "app": "SketchUp 2024", "details": "The selected floor region remains translucent with Push/Pull distance feedback visible."}, {"start_s": 20997.272, "end_s": 21007.848, "action": "Clicked repeatedly on the model and typed a shortcut, then middle-clicked and scrolled extensively to orbit and zoom; ended on a more frontal view with model geometry selected.", "intent": "Navigate around the kitchen model and inspect selected geometry.", "app": "SketchUp 2024", "details": "The final view shows the room from the front-left with selection outlines and translucent active geometry."}, {"start_s": 21007.848, "end_s": 21017.392, "action": "Adjusted the SketchUp view through repeated navigation and clicks, moving from a closer kitchen view to a distant overhead perspective of the kitchen and dining area.", "intent": "Inspect the overall 3D kitchen layout from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 21017.392, "end_s": 21028.145, "action": "Restored and resized the SketchUp window, then navigated the model to zoom from the full kitchen toward the dining table and kitchen counters.", "intent": "Review the modeled kitchen and dining arrangement in closer detail.", "app": "SketchUp 2024", "details": null}, {"start_s": 21028.145, "end_s": 21038.335, "action": "Navigated around the model and zoomed between wider and closer views, ending on a close-up of the dining table with place settings, cookware, and a flower vase.", "intent": "Inspect the dining-table furnishings and surrounding kitchen components.", "app": "SketchUp 2024", "details": null}, {"start_s": 21038.335, "end_s": 21048.167, "action": "Repeatedly clicked the cookware on the dining table, leaving the pot and kettle highlighted as a selected group.", "intent": "Select the cookware objects for further manipulation.", "app": "SketchUp 2024", "details": "The pot and kettle are visibly outlined in blue in the final view."}, {"start_s": 21048.167, "end_s": 21056.0, "action": "Typed a character, clicked the selected cookware, and navigated the view while entering a move operation; the cookware remained selected as the camera shifted to a higher kitchen view.", "intent": "Begin repositioning the selected cookware within the model.", "app": "SketchUp 2024", "details": "SketchUp shows move-tool status and a distance readout while the selected cookware is being manipulated."}, {"start_s": 21056.0, "end_s": 21064.015, "action": "Continued navigating toward the countertop and clicked to place the selected cookware near the stovetop, leaving a small pot-like object highlighted on the counter.", "intent": "Move the selected cookware from the dining table to the kitchen countertop.", "app": "SketchUp 2024", "details": "The final view shows the selected object positioned beside the cooktop."}, {"start_s": 21064.015, "end_s": 21073.662, "action": "Scrolled and navigated around the SketchUp kitchen model, then clicked the table setting to select the kettle.", "intent": "Inspect and select an object in the kitchen scene.", "app": "SketchUp 2024", "details": "The view moved from a wider kitchen perspective to a close-up of the dining table, where the kettle was selected."}, {"start_s": 21073.662, "end_s": 21083.691, "action": "Clicked the selected kettle and navigated the camera around the kitchen, then orbited and zoomed out to a broad view of the room.", "intent": "Reposition or inspect the kettle and overall kitchen model.", "app": "SketchUp 2024", "details": "The kettle remained selected while the view shifted from the dining area to the countertop and then to an elevated full-room perspective."}, {"start_s": 21083.691, "end_s": 21094.091, "action": "Adjusted the camera and interacted with the model, then changed the display to a rendered, colored view and navigated from the dining table to an overhead kitchen view.", "intent": "Review the completed kitchen scene from multiple viewpoints.", "app": "SketchUp 2024", "details": "The dining table, place settings, flowers, cabinets, appliances, and refrigerator became clearly visible in the rendered view."}, {"start_s": 21094.091, "end_s": 21104.307, "action": "Navigated and zoomed into the kitchen countertop, then repeatedly clicked around the kettle and nearby countertop objects to select or manipulate them.", "intent": "Inspect or adjust countertop appliances in the kitchen model.", "app": "SketchUp 2024", "details": "The view ended on a close-up of the cooktop, rice cooker, and kettle, with the kettle selected."}, {"start_s": 21104.307, "end_s": 21114.147, "action": "Clicked and dragged the rice cooker across the cooktop area, then continued adjusting its position while keeping it selected.", "intent": "Reposition the rice cooker on the kitchen countertop.", "app": "SketchUp 2024", "details": "The rice cooker moved leftward over the burners while the kettle remained visible to the right."}, {"start_s": 21114.147, "end_s": 21121.404, "action": "Scrolled and navigated closer around the cooktop, then clicked and adjusted the selected rice cooker from a low countertop viewpoint.", "intent": "Fine-tune or inspect the rice cooker placement.", "app": "SketchUp 2024", "details": "The final view showed the large selected rice cooker positioned over the cooktop beside the kettle."}, {"start_s": 21121.404, "end_s": 21130.147, "action": "Selected the kitchen cooktop assembly and began moving it, dragging the selection and scrolling while the move operation remained active.", "intent": "Adjust the position of the selected cooktop assembly.", "app": "SketchUp 2024", "details": "The selected cooktop and pot remained outlined in blue; the distance field showed approximately 455.52 mm."}, {"start_s": 21130.147, "end_s": 21138.34, "action": "Scrolled extensively while the move tool remained active, then navigated away from the kitchen model to a close view of wall panels.", "intent": "Navigate the 3D view during an active move operation.", "app": "SketchUp 2024", "details": "The viewport briefly showed an empty gray area and then a close-up of vertical wall elements."}, {"start_s": 21138.34, "end_s": 21149.059, "action": "Continued scrolling and orbit navigation through the kitchen scene, moving from the wall area to a wider view of the dining and kitchen cabinetry.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "The final view showed kitchen cabinets, counters, dining furniture, and the model's interior."}, {"start_s": 21149.059, "end_s": 21159.116, "action": "Navigated back toward the kitchen counter, selected and interacted with countertop and cabinet areas, then zoomed into the cooktop and pot.", "intent": "Inspect and select kitchen components for editing.", "app": "SketchUp 2024", "details": "The view progressed from a wider kitchen elevation to a close-up of the cooktop, pot, kettle, and oven controls."}, {"start_s": 21159.116, "end_s": 21169.427, "action": "Clicked repeatedly around the pot and cooktop, typed a character, and began dragging the selected kitchen geometry.", "intent": "Select or manipulate the pot/cooktop component.", "app": "SketchUp 2024", "details": "The pot and cooktop were shown in close view; the final frame displayed active selection highlighting and a translucent editing state."}, {"start_s": 21169.427, "end_s": 21180.166, "action": "Continued dragging the selected pot, then clicked and typed while keeping the pot selected; scrolled slightly at the end.", "intent": "Move or adjust the selected pot on the cooktop.", "app": "SketchUp 2024", "details": "The pot remained enclosed by a blue selection box with move handles, and the distance field showed approximately 38.32 mm."}, {"start_s": 21180.166, "end_s": 21190.22, "action": "Selected the modeled pot and adjusted its position slightly over the cooktop while remaining in the Move tool.", "intent": "Position the pot on the cooktop.", "app": "SketchUp 2024", "details": null}, {"start_s": 21190.22, "end_s": 21202.9, "action": "Orbited and zoomed around the cooktop, then moved the selected pot to refine its placement over the left burner.", "intent": "Inspect and adjust the pot placement from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 21202.9, "end_s": 21214.781, "action": "Orbited and zoomed out to review the kitchen counter, briefly manipulated the selected pot, and ended with the pot visible on the cooktop without its selection highlight.", "intent": "Review the pot and cooktop arrangement in the wider kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 21214.781, "end_s": 21224.47, "action": "Selected the kettle, adjusted the view, and moved it leftward across the counter toward the cooktop area.", "intent": "Reposition the kettle relative to the pot and cooktop.", "app": "SketchUp 2024", "details": null}, {"start_s": 21224.47, "end_s": 21234.117, "action": "Dragged the kettle farther left, switched to the Scale tool, and resized the selected kettle; the view showed it moved near the pot and cooktop.", "intent": "Place and size the kettle in the kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 21234.117, "end_s": 21244.955, "action": "Scrolled to adjust the view while keeping the kettle selected; the window was then moved or resized, with the kettle remaining positioned beside the pot on the cooktop.", "intent": "Review the final placement of the kettle and pot.", "app": "SketchUp 2024", "details": "A Windows Explorer window move/resize event was recorded at the end of the span."}, {"start_s": 21244.955, "end_s": 21255.924, "action": "Adjusted the selected kettle assembly with repeated clicks and view navigation, then continued a move operation until the object remained selected.", "intent": "Position the kettle assembly in the cooktop model.", "app": "SketchUp 2024", "details": "Selected kettle components remain outlined in blue; the move tool shows a 25.08 mm distance."}, {"start_s": 21255.924, "end_s": 21265.294, "action": "Orbited the model, entered a move-related command, dragged across the kettle assembly, and switched to the Scale tool, leaving a yellow bounding box with scale handles.", "intent": "Reorient and resize the selected kettle assembly.", "app": "SketchUp 2024", "details": "The kettle is selected with green scale handles and a yellow bounding box."}, {"start_s": 21265.294, "end_s": 21270.515, "action": "Used keyboard shortcuts and middle-button view navigation to zoom out and inspect the cooktop, then clicked to continue positioning the selected kettle.", "intent": "Review the kettle placement from a wider view.", "app": "SketchUp 2024", "details": "The view briefly shows the full cooktop and surrounding kitchen before returning to a closer kettle view."}, {"start_s": 21270.515, "end_s": 21286.067, "action": "Kept the kettle assembly selected and clicked to continue a move operation, changing the displayed movement distance from approximately 31.78 mm to 57.24 mm.", "intent": "Move the selected kettle assembly along the model.", "app": "SketchUp 2024", "details": "The move tool remains active and the kettle is outlined in blue."}, {"start_s": 21286.067, "end_s": 21295.276, "action": "Navigated the camera around the cooktop, clicked and dragged in the model, then zoomed out to an overhead view of the kitchen and dining area.", "intent": "Inspect the overall kitchen model after positioning the cooktop objects.", "app": "SketchUp 2024", "details": "The final view shows the complete kitchen layout with the cooktop, cookware, cabinets, refrigerator, and dining table."}, {"start_s": 21295.276, "end_s": 21304.532, "action": "Zoomed back toward the cooktop and repeatedly clicked the kettle area, then orbited the view, leaving the kettle selected.", "intent": "Inspect and refine the kettle assembly placement on the cooktop.", "app": "SketchUp 2024", "details": "The final close view shows the kettle outlined in blue beside the burners and control knobs."}, {"start_s": 21304.532, "end_s": 21315.379, "action": "Resized and interacted with the SketchUp window, typed \u201cm,\u201d and clicked around the selected kettle model, leaving the Move tool active with a displayed distance of 10.66 mm.", "intent": "Adjust or reposition the selected kettle component.", "app": "SketchUp", "details": "Selected kettle remains outlined with move handles."}, {"start_s": 21315.379, "end_s": 21326.595, "action": "Pressed Space and navigated the 3D view with middle-clicks and scrolls, briefly moving to an extreme close or clipped view before returning to the kitchen model.", "intent": "Navigate and inspect the kitchen scene.", "app": "SketchUp", "details": "View changes from a clipped gray view to a close view of the kettle, cooktop, and controls."}, {"start_s": 21326.595, "end_s": 21336.822, "action": "Navigated extensively with scrolls and clicks, zooming out from the appliance close-up to reveal the complete modeled kitchen and dining area.", "intent": "Review the overall kitchen layout.", "app": "SketchUp", "details": "The scene changes to a wide elevated view showing cabinets, counters, appliances, and dining table."}, {"start_s": 21336.822, "end_s": 21346.139, "action": "Used middle-click navigation and repeated scrolls to move from the wide kitchen view into a close inspection of the cooktop and oven, then zoomed back out to an elevated room view.", "intent": "Inspect kitchen appliances and reframe the model.", "app": "SketchUp", "details": "Close view shows the cooktop, kettle, pot, oven, and countertop before returning to the full room."}, {"start_s": 21346.139, "end_s": 21365.964, "action": "Rotated the 3D camera with a middle-click and paused on an elevated perspective of the kitchen and dining area.", "intent": "Review the model from another perspective.", "app": "SketchUp", "details": "Single screenshot shows the full kitchen from a front-left elevated angle."}, {"start_s": 21365.964, "end_s": 21374.204, "action": "Rotated and zoomed the camera through several middle-click and scroll interactions, ending on a more distant view of the kitchen with the scale figure visible.", "intent": "Continue navigating and inspect the scene composition.", "app": "SketchUp", "details": "Final view is a wide perspective of the kitchen model with the standing scale figure at right."}, {"start_s": 21374.204, "end_s": 21383.306, "action": "Scrolled through the SketchUp kitchen model and middle-clicked to adjust the 3D view, ending on a more distant overview.", "intent": "Inspect the kitchen model from different viewing distances.", "app": "SketchUp 2024", "details": null}, {"start_s": 21383.306, "end_s": 21393.53, "action": "Scrolled repeatedly to reposition the camera, then middle-clicked and ended on another distant angled view of the kitchen and dining area.", "intent": "Continue examining the overall model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 21393.53, "end_s": 21413.53, "action": "Middle-clicked and scrolled several times to orbit and adjust the camera, moving between angled views of the kitchen cabinets, appliances, sink, and dining table.", "intent": "Review the model from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 21413.53, "end_s": 21433.53, "action": "Remained idle in SketchUp with the kitchen model view unchanged; system resume and configuration changes were recorded near the end of the interval.", "intent": "Pause while keeping the current model view open.", "app": "SketchUp 2024", "details": "No visible modeling interaction occurred during the interval."}, {"start_s": 21433.53, "end_s": 21445.091, "action": "Scrolled to zoom the model out and middle-clicked, ending with a smaller full-room overview of the kitchen and dining area.", "intent": "Inspect the complete room arrangement at a wider scale.", "app": "SketchUp 2024", "details": null}, {"start_s": 21445.091, "end_s": 21453.061, "action": "Middle-clicked and scrolled to change the camera, clicked repeatedly around the upper wall/window area, dragged within the model, typed 'r', and ended with the left wall selected and the view zoomed closer.", "intent": "Navigate the model and select or manipulate a wall component.", "app": "SketchUp 2024", "details": "The final view shows the left wall highlighted with SketchUp selection shading."}, {"start_s": 21453.061, "end_s": 21464.94, "action": "Clicked twice on the left wall area to begin defining a rectangular element; left the rectangle tool active with a partial rectangle visible.", "intent": "Create a rectangular wall element in the kitchen model.", "app": "SketchUp 2024", "details": "The rectangle dimensions field showed approximately 208.93 mm."}, {"start_s": 21464.94, "end_s": 21479.515, "action": "Completed the rectangle by setting the opposite corner, then orbited the camera to a closer view of the kitchen wall and cabinets.", "intent": "Finalize the wall rectangle and inspect it from another angle.", "app": "SketchUp 2024", "details": "The rectangle remained outlined on the left wall while the orbit changed the viewpoint."}, {"start_s": 21479.515, "end_s": 21489.028, "action": "Adjusted the rectangle with several clicks and drags, entered a space and an m, and left a tall white rectangular face visible on the left wall.", "intent": "Refine the newly created wall element and its placement.", "app": "SketchUp 2024", "details": "SketchUp displayed an 'On Green Axis Outside Active' inference during the operation."}, {"start_s": 21489.028, "end_s": 21499.65, "action": "Clicked around the rectangular face and orbited the model, changing the view to show the rectangle selected within the kitchen wall opening.", "intent": "Inspect and reposition or verify the wall element in the model.", "app": "SketchUp 2024", "details": "The view shifted to a wider kitchen perspective and the rectangular face remained highlighted."}, {"start_s": 21499.65, "end_s": 21509.708, "action": "Used middle-button navigation, zoomed out substantially, and orbited to reveal the complete kitchen scene with cabinets, appliances, dining table, chairs, and a standing figure.", "intent": "Review the overall kitchen model from a wider perspective.", "app": "SketchUp 2024", "details": "No confirmed geometry edit was visible during the navigation."}, {"start_s": 21509.708, "end_s": 21518.165, "action": "Continued orbiting and zooming around the complete kitchen model, ending on a smaller elevated perspective showing the room layout and dining area.", "intent": "Continue visual inspection of the finished kitchen scene.", "app": "SketchUp 2024", "details": "Navigation was performed with middle-button clicks and scroll bursts; no new edits were visibly confirmed."}, {"start_s": 21518.165, "end_s": 21526.781, "action": "Orbit and zoom the SketchUp camera toward the modeled kitchen and dining area using middle-button navigation and scroll input.", "intent": "Inspect the kitchen model from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 21526.781, "end_s": 21536.322, "action": "Orbit and zoom around the kitchen scene, briefly moving the view between wider and closer perspectives of the cabinets, appliances, and dining table.", "intent": "Review the interior model from alternate viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 21536.322, "end_s": 21546.842, "action": "Continue orbiting and zooming around the kitchen and dining model, ending by pulling the camera back to a wider view.", "intent": "Examine the overall arrangement and presentation of the modeled room.", "app": "SketchUp 2024", "details": null}, {"start_s": 21546.842, "end_s": 21563.277, "action": "Navigate the camera with middle-button orbiting and scrolling, alternating between closer and wider views of the kitchen, dining table, and surrounding room shell.", "intent": "Review the completed room model from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 21563.277, "end_s": 21573.619, "action": "Orbit and zoom farther out around the model, revealing the room shell and the standing scale figure, then rotate to another elevated angle.", "intent": "Inspect the model in its broader scene context.", "app": "SketchUp 2024", "details": null}, {"start_s": 21573.619, "end_s": 21580.211, "action": "Orbit and zoom back toward the kitchen, moving from the distant view to a closer frontal perspective that clearly shows the cabinets, sink, appliances, dining table, and chairs.", "intent": "Set a closer inspection view of the kitchen and dining area.", "app": "SketchUp 2024", "details": null}, {"start_s": 21580.211, "end_s": 21600.211, "action": "Remained idle while viewing the SketchUp kitchen and dining-room model.", "intent": "Review the current 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 21600.211, "end_s": 21617.099, "action": "Opened the Window menu and displayed its tray and settings options.", "intent": "Access SketchUp window or tray controls.", "app": "SketchUp 2024", "details": "The Window menu was left open."}, {"start_s": 21617.099, "end_s": 21621.204, "action": "Selected New Tray from the Window menu, then the SketchUp window became hidden as the 3D Warehouse view opened.", "intent": "Open a new SketchUp tray and access 3D Warehouse.", "app": "SketchUp 2024", "details": null}, {"start_s": 21621.204, "end_s": 21631.053, "action": "Activated the 3D Warehouse window and edited its search field, replacing the existing query with the beginning of a sitting-people search.", "intent": "Search 3D Warehouse for seating-related models.", "app": "3D Warehouse", "details": "The search field progressed to \u201csitting\u201d."}, {"start_s": 21631.053, "end_s": 21644.316, "action": "Continued typing in the 3D Warehouse search field until it read \u201csitting people on chir,\u201d while dining-table model results remained visible.", "intent": "Refine the 3D Warehouse search for people sitting on chairs.", "app": "3D Warehouse", "details": "The displayed results still showed dining-table models."}, {"start_s": 21644.316, "end_s": 21656.525, "action": "Corrected the search text to \u201csitting people on chair,\u201d clicked the search button, and waited while the results refreshed and loaded.", "intent": "Run the refined seating-model search.", "app": "3D Warehouse", "details": "Loading placeholders appeared after the search."}, {"start_s": 21656.525, "end_s": 21669.509, "action": "Scrolled through the 3D Warehouse results for \u201csitting people on chair,\u201d reviewing model cards including chairs and loungers.", "intent": "Review available search results.", "app": "SketchUp 2024", "details": null}, {"start_s": 21669.509, "end_s": 21679.606, "action": "Selected the search field, cleared the existing query, and began typing a new search beginning with \u201cp\u201d.", "intent": "Replace the current 3D Warehouse search query.", "app": "SketchUp 2024", "details": null}, {"start_s": 21679.606, "end_s": 21688.829, "action": "Continued typing in the search field until the query read \u201cpeople sitting \u201d.", "intent": "Enter a revised model search phrase.", "app": "SketchUp 2024", "details": null}, {"start_s": 21688.829, "end_s": 21696.626, "action": "Completed the query as \u201cpeople sitting on chairs\u201d and clicked the search button.", "intent": "Search the 3D Warehouse for people sitting on chairs.", "app": "SketchUp 2024", "details": null}, {"start_s": 21696.626, "end_s": 21708.004, "action": "Scrolled through the returned results, viewing multiple sun lounger and seating model cards.", "intent": "Review results for the submitted search.", "app": "SketchUp 2024", "details": null}, {"start_s": 21708.004, "end_s": 21718.544, "action": "Cleared the search field and typed a new query beginning \u201ckitchen sitting \u201d.", "intent": "Start a different 3D Warehouse search.", "app": "SketchUp 2024", "details": null}, {"start_s": 21718.544, "end_s": 21726.379, "action": "Typed \u201cpeople\u201d to extend the 3D Warehouse search query to \u201ckitchen sitting people,\u201d then clicked the search control twice.", "intent": "Refine the model search query.", "app": "SketchUp 2024", "details": "3D Warehouse search field visibly contains \u201ckitchen sitting people.\u201d"}, {"start_s": 21726.379, "end_s": 21736.811, "action": "Scrolled down through the 3D Warehouse results while keeping the query \u201ckitchen sitting people\u201d visible.", "intent": "Review additional search results.", "app": "SketchUp 2024", "details": "Results moved from furniture thumbnails to items including Small Cabin, Cabin proposal, and dining-related models."}, {"start_s": 21736.811, "end_s": 21747.842, "action": "Clicked the search field, cleared the existing query with repeated backspaces, and began entering a new query with \u201csi.\u201d", "intent": "Replace the current search terms.", "app": "SketchUp 2024", "details": "The field visibly shows \u201csi\u201d by the end of the span."}, {"start_s": 21747.842, "end_s": 21755.722, "action": "Continued typing in the search field, extending the partial query toward \u201csitting.\u201d", "intent": "Enter a revised model search query.", "app": "SketchUp 2024", "details": "The field visibly shows \u201csittin\u201d during the span."}, {"start_s": 21755.722, "end_s": 21762.714, "action": "Typed additional terms, producing the visible query \u201csitting people.\u201d", "intent": "Specify a search for people sitting.", "app": "SketchUp 2024", "details": "The search field visibly contains \u201csitting people.\u201d"}, {"start_s": 21762.714, "end_s": 21772.169, "action": "Corrected the final search terms with backspaces and typed \u201cdinning,\u201d then clicked and dragged within the search field.", "intent": "Adjust the search query to include dining-related terms.", "app": "SketchUp 2024", "details": "The final visible query reads \u201csitting people on dinning\u201d; no search results refresh is shown."}, {"start_s": 21772.169, "end_s": 21782.704, "action": "Scroll through the 3D Warehouse results, focus the search field, and clear the existing \u201csitting people on dinning\u201d query.", "intent": "Prepare the search field for a revised query.", "app": "SketchUp 2024", "details": "The results view remains visible with a single \u201cCabin proposal\u201d model card."}, {"start_s": 21782.704, "end_s": 21793.52, "action": "Type \u201csitting people\u201d into the search field and click the search button.", "intent": "Search the 3D Warehouse for sitting people models.", "app": "SketchUp 2024", "details": "The search field displays \u201csitting people\u201d; the visible results have not yet visibly refreshed."}, {"start_s": 21793.52, "end_s": 21803.018, "action": "Scroll through the refreshed \u201csitting people\u201d results, reviewing model cards including \u201c3d people sitting,\u201d \u201csitting 3D people,\u201d and \u201cSitting people.\u201d", "intent": "Review available sitting-person model results.", "app": "SketchUp 2024", "details": null}, {"start_s": 21803.018, "end_s": 21822.459, "action": "Continue scrolling through the search results and inspect individual seated-person model cards, including several ROCKIT3D products.", "intent": "Browse additional candidate seated-person models.", "app": "SketchUp 2024", "details": "Visible cards include \u201cROCKIT3D | People 0004 sit,\u201d \u201cPeople 0017 sit,\u201d \u201cPeople 0034 sit,\u201d and \u201cPeople 0023 sit.\u201d"}, {"start_s": 21822.459, "end_s": 21832.776, "action": "Focus the search field, append \u201c on chair\u201d to form \u201csitting people on chair,\u201d and click the search button.", "intent": "Narrow the search to people sitting on chairs.", "app": "SketchUp 2024", "details": "The completed query is visible in the search field."}, {"start_s": 21832.776, "end_s": 21841.953, "action": "Scroll through the results for \u201csitting people on chair,\u201d then click back into the search field.", "intent": "Review the refined results and prepare the query for further editing.", "app": "SketchUp 2024", "details": "The visible results show multiple \u201csun lounger\u201d model cards; no model was opened."}, {"start_s": 21841.953, "end_s": 21854.065, "action": "Deleted text from the 3D Warehouse search field, clicked near the search controls, and scrolled through the results while they loaded.", "intent": "Refine or inspect 3D Warehouse search results for sitting people models.", "app": "SketchUp 2024", "details": "The search field visibly contained \u201csitting people\u201d; result cards were loading."}, {"start_s": 21854.065, "end_s": 21864.563, "action": "Scrolled down through the 3D Warehouse results, bringing individual sitting-person model cards and thumbnails into view.", "intent": "Review available sitting-person models.", "app": "SketchUp 2024", "details": "Visible results included ROCKIT3D people models and a \u201cSitting people\u201d collection."}, {"start_s": 21864.563, "end_s": 21876.465, "action": "Continued scrolling through the sitting-people results, then clicked the Warehouse window controls to hide it and return to the SketchUp model.", "intent": "Finish browsing the model results and return to the kitchen scene.", "app": "SketchUp 2024", "details": "The Warehouse showed 639 model results before being hidden."}, {"start_s": 21876.465, "end_s": 21881.098, "action": "Returned to the SketchUp kitchen scene and typed the letter \u201cb\u201d without a visible change to the model.", "intent": "Resume work in the SketchUp model.", "app": "SketchUp 2024", "details": "The kitchen and dining area remained in the same overview perspective."}, {"start_s": 21881.098, "end_s": 21893.202, "action": "Reactivated SketchUp, opened the Default Tray\u2019s Materials panel, and navigated the model view closer to the kitchen and dining table while briefly scrolling and pressing Space.", "intent": "Inspect the scene and prepare material or model editing tools.", "app": "SketchUp 2024", "details": "The Materials panel displayed \u201cTranslucent Glass Blue\u201d under Glass and Mirrors."}, {"start_s": 21893.202, "end_s": 21901.578, "action": "Adjusted the view and clicked several kitchen elements, selecting first the surrounding room structure and then the backsplash and cabinet-area geometry.", "intent": "Select kitchen geometry for editing or inspection.", "app": "SketchUp 2024", "details": "Selected geometry was outlined in blue; the final view focused on the blue-highlighted backsplash and adjacent kitchen components."}, {"start_s": 21901.578, "end_s": 21912.072, "action": "Opened the Materials category menu, selected Glass and Mirrors, and chose the Translucent Glass Blue material while the kitchen model remained selected.", "intent": "Apply or preview a glass material on the selected kitchen geometry.", "app": "SketchUp 2024", "details": "The Materials tray changed from the category list to Glass and Mirrors and displayed Translucent Glass Blue."}, {"start_s": 21912.072, "end_s": 21922.034, "action": "Switched the Materials tray to Metal, selected Metal Rusted, and used the paint tool on the kitchen model; the view remained focused on the selected backsplash and cabinetry.", "intent": "Apply or preview a rusted metal material on selected model surfaces.", "app": "SketchUp 2024", "details": "The selected material field reads Metal Rusted and the paint-bucket cursor is visible over the model."}, {"start_s": 21922.034, "end_s": 21930.48, "action": "Changed the camera view to a wider kitchen-and-dining perspective, continued navigating the model, and opened the Materials category menu again.", "intent": "Inspect the model from a wider view and prepare to choose another material category.", "app": "SketchUp 2024", "details": "The wider view reveals the refrigerator and dining table; the category menu is open with Metal selected."}, {"start_s": 21930.48, "end_s": 21940.689, "action": "Selected Stone in the Materials tray and clicked a stone texture thumbnail while keeping the kitchen geometry selected.", "intent": "Choose a stone material for application or preview on the selected model.", "app": "SketchUp 2024", "details": "The Materials tray shows the Stone category and multiple stone texture thumbnails."}, {"start_s": 21940.689, "end_s": 21948.137, "action": "Scrolled through the Materials tray, switched to Tile, and opened the category menu again.", "intent": "Browse tile materials for the kitchen model.", "app": "SketchUp 2024", "details": "The Tile category displays several tile texture thumbnails and the category list is open at the end of the span."}, {"start_s": 21948.137, "end_s": 21957.417, "action": "Selected the Wood category from the open Materials menu, then waited for the tray to update.", "intent": "Browse wood materials for possible application to the selected kitchen model.", "app": "SketchUp 2024", "details": "The Materials tray remains visible with the category menu closing and a loading indicator appearing."}, {"start_s": 21957.417, "end_s": 21966.907, "action": "Scrolled through the Materials tray, dragged within the material category area, and switched from the category list to Carpet, Fabrics, Leathers, Textiles and Wallpaper thumbnails before hiding the application.", "intent": "Browse SketchUp material categories and preview available textures.", "app": "SketchUp 2024", "details": "Kitchen model remained unchanged."}, {"start_s": 21966.907, "end_s": 21976.618, "action": "Scrolled and clicked the Materials category selector to reopen the category list, leaving the material thumbnails visible behind it.", "intent": "Continue browsing material categories.", "app": "SketchUp 2024", "details": "No model geometry or material assignment visibly changed."}, {"start_s": 21976.618, "end_s": 21986.28, "action": "Selected Patterns from the Materials category list, scrolled through its swatches, then reopened the category selector and selected Roofing before hiding the application.", "intent": "Inspect pattern and roofing material options.", "app": "SketchUp 2024", "details": "The kitchen scene remained unchanged."}, {"start_s": 21986.28, "end_s": 21993.816, "action": "Reopened the Materials category list, selected Stone, and reopened the list again while browsing the available stone swatches.", "intent": "Browse stone material options.", "app": "SketchUp 2024", "details": "No visible material was applied to the model."}, {"start_s": 21993.816, "end_s": 22003.686, "action": "Kept the Materials category list open and moved or resized a Windows Explorer window near the end of the span.", "intent": "Adjust the overlapping window while continuing material browsing.", "app": "SketchUp 2024", "details": "The SketchUp kitchen model and material browser remained visible."}, {"start_s": 22003.686, "end_s": 22023.686, "action": "Returned the SketchUp window to view briefly, then hid it again; no further interaction or model edit occurred.", "intent": "Temporarily bring the application forward without making changes.", "app": "SketchUp 2024", "details": "Materials category menu remained open."}, {"start_s": 22023.686, "end_s": 22035.309, "action": "Clicked twice in the SketchUp workspace, then hid the application window.", "intent": "Interact with the current SketchUp model before switching away.", "app": "SketchUp 2024", "details": "Displayed a kitchen and dining-room model with the Materials tray open."}, {"start_s": 22035.309, "end_s": 22045.414, "action": "Scrolled repeatedly through the Materials tray, changing the visible swatches from stone textures to color palettes.", "intent": "Browse available material or color options.", "app": "SketchUp 2024", "details": "The model view remained unchanged while the Materials tray content changed."}, {"start_s": 22045.414, "end_s": 22050.007, "action": "Resized and moved a Windows Explorer window, then scrolled briefly.", "intent": "Adjust or inspect another window while SketchUp remained visible.", "app": "Windows Explorer", "details": "The Explorer window was mostly obscured and only its window-state changes were visible."}, {"start_s": 22050.007, "end_s": 22069.361, "action": "Left the SketchUp view unchanged while the application was hidden and a small Explorer window was moved or resized.", "intent": "Manage window visibility and layout.", "app": "SketchUp 2024", "details": "The kitchen model and red/orange Materials swatches remained visible."}, {"start_s": 22069.361, "end_s": 22082.333, "action": "Scrolled through the SketchUp view to zoom out, then used middle-button clicks to adjust the camera.", "intent": "Reframe the kitchen model for a wider view.", "app": "SketchUp 2024", "details": "The model changed from a closer perspective to a wider view showing more of the room."}, {"start_s": 22082.333, "end_s": 22090.09, "action": "Scrolled and adjusted the camera again to a higher, wider perspective, then clicked the taskbar to switch applications.", "intent": "Finish reviewing the model and switch to another application.", "app": "SketchUp 2024", "details": "The interval ended with an application switch to the recorder."}, {"start_s": 22090.09, "end_s": 22101.866, "action": "Adjusted the SketchUp camera view by scrolling to zoom out and reveal more of the kitchen model.", "intent": "Review the overall kitchen layout.", "app": "SketchUp 2024", "details": "The view changed from a close-up perspective to a wider view of the kitchen and dining area."}, {"start_s": 22101.866, "end_s": 22112.906, "action": "Clicked and scrolled repeatedly in the SketchUp viewport to zoom farther out, then browsed the material color swatches.", "intent": "Inspect the model from a wider view while reviewing available materials.", "app": "SketchUp 2024", "details": "The kitchen became smaller in the viewport and the Materials tray swatches changed from red/orange tones to green tones."}, {"start_s": 22112.906, "end_s": 22127.005, "action": "Resized and navigated the SketchUp view, selected the Paint Bucket tool, and clicked in the Materials tray; opened the Create Material window.", "intent": "Prepare to edit or create a material for the model.", "app": "SketchUp 2024", "details": "The backsplash appeared green, and the Create Material dialog became active at the end of the span."}, {"start_s": 22127.005, "end_s": 22137.96, "action": "Dragged within the Create Material color wheel and brightness control to change the material preview from green toward brown.", "intent": "Adjust the color of a custom SketchUp material.", "app": "SketchUp 2024", "details": "The Create Material dialog remained open with the material preview changing to a brown tone."}, {"start_s": 22137.96, "end_s": 22149.536, "action": "Dragged repeatedly across the color wheel and vertical brightness control in the Create Material dialog, cycling the material preview through green shades.", "intent": "Continue tuning the custom material color.", "app": "SketchUp 2024", "details": "The dialog remained open and the preview ended on a dark green color."}, {"start_s": 22149.536, "end_s": 22158.275, "action": "Dragged in the Create Material color controls to change the preview from green to a muted blue-gray, then clicked near the dialog controls and returned focus to SketchUp.", "intent": "Finalize or review another custom material color.", "app": "SketchUp 2024", "details": "The Create Material dialog remained visible with the blue-gray preview and OK/Cancel controls."}, {"start_s": 22158.275, "end_s": 22167.89, "action": "Adjusted the SketchUp camera around the furnished kitchen and dining model using drags and scrolls, then navigated the view to show more of the room.", "intent": "Inspect the 3D kitchen layout from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 22167.89, "end_s": 22178.608, "action": "Orbited and zoomed the SketchUp camera around the kitchen model, ending on a wider view that included the refrigerator, cabinets, counters, and dining table.", "intent": "Review the overall room composition and model placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 22178.608, "end_s": 22188.776, "action": "Selected the kitchen counter and cabinet geometry, then adjusted the camera to inspect the selected model from closer and wider views.", "intent": "Select and review the kitchen cabinetry and countertop assembly.", "app": "SketchUp 2024", "details": "Selected geometry was outlined in blue."}, {"start_s": 22188.776, "end_s": 22197.936, "action": "Continued clicking the kitchen countertop geometry and changed the view into a translucent selection/edit display, then resized or moved a window near the right edge.", "intent": "Inspect or prepare the countertop surfaces for editing.", "app": "SketchUp 2024", "details": "The countertop surfaces appeared selected with a dotted pattern and the model became semi-transparent."}, {"start_s": 22197.936, "end_s": 22208.602, "action": "Opened the Materials tray's Tile category and browsed tile swatches while keeping the countertop geometry selected; the SketchUp window was then resized.", "intent": "Browse tile materials for the selected countertop surfaces.", "app": "SketchUp 2024", "details": "A tile material grid was visible in the Materials tray."}, {"start_s": 22208.602, "end_s": 22219.049, "action": "Selected tile swatches in the Materials tray and applied them to the countertop surfaces, changing the counters first to a dark slate-like tile and then to a patterned floral tile.", "intent": "Test countertop tile finishes on the kitchen model.", "app": "SketchUp 2024", "details": "The Materials tray showed Slate Light Tile and later Ornate Tile 01."}, {"start_s": 22219.049, "end_s": 22227.834, "action": "Scrolled through the Materials panel and selected tile materials, then clicked the countertop to apply the chosen material; the countertop remained visible with a patterned tile finish.", "intent": "Test and apply countertop materials in the kitchen model.", "app": "SketchUp 2024", "details": "Materials panel showed Ornate Tile 02 while browsing tile swatches."}, {"start_s": 22227.834, "end_s": 22237.736, "action": "Browsed additional material swatches, selected Herringbone, and clicked the countertop, then selected Slate and applied it across the countertop; the surface changed to a dark slate-like finish.", "intent": "Compare and apply different countertop material options.", "app": "SketchUp 2024", "details": "The countertop visibly changed from patterned tile to dark slate."}, {"start_s": 22237.736, "end_s": 22247.994, "action": "Selected Metal Panel from the Materials panel and clicked the countertop, then scrolled through the material swatches while the countertop displayed a dark panel-like finish.", "intent": "Continue evaluating countertop surface materials.", "app": "SketchUp 2024", "details": "The view was also adjusted by scrolling, bringing the sink and countertop closer."}, {"start_s": 22247.994, "end_s": 22254.58, "action": "Scrolled through the material swatches and adjusted the SketchUp window view, ending with a wider view of the kitchen and dining area while the countertop retained the dark finish.", "intent": "Review the model and browse further material choices.", "app": "SketchUp 2024", "details": "The application was briefly hidden and the Windows Explorer window was resized; no material application was evident during that interval."}, {"start_s": 22254.58, "end_s": 22265.624, "action": "Selected the Slate Light Tile material from the Materials panel; the model view remained unchanged until the selection was made.", "intent": "Choose another material option for the countertop.", "app": "SketchUp 2024", "details": "The Materials panel displayed Slate Light Tile as the active selection."}, {"start_s": 22265.624, "end_s": 22275.322, "action": "Clicked the countertop to apply Slate Light Tile, changing the visible countertop surfaces to a dark slate-like tile finish, then scrolled the Materials panel slightly.", "intent": "Apply the selected countertop material and continue browsing materials.", "app": "SketchUp 2024", "details": "The kitchen remained in a wide view with the dark countertop finish visible."}, {"start_s": 22275.322, "end_s": 22285.801, "action": "Clicked and scrolled within the SketchUp kitchen model, changing the camera to a closer view of the countertop and sink while the Materials tray remained open on Ornate Tile 02.", "intent": "Inspect the model and prepare to choose or apply a countertop material.", "app": "SketchUp", "details": "Paint Bucket tool was active; no definite material application is visible."}, {"start_s": 22285.801, "end_s": 22295.786, "action": "Scrolled to zoom out and clicked a material swatch, changing the selected material to Tile Checker BW and displaying a black-and-white checker pattern across the countertops.", "intent": "Apply a checker tile material to the kitchen countertops.", "app": "SketchUp", "details": "The Materials tray shows Tile Checker BW after the selection."}, {"start_s": 22295.786, "end_s": 22304.941, "action": "Scrolled and adjusted the view while browsing the Materials tray; the checker-pattern countertops remained visible and the material swatches changed as the tray was navigated.", "intent": "Review material options and inspect the countertop result from a wider view.", "app": "SketchUp", "details": "Windows Explorer window resize and move events were recorded, but no Explorer content is visible."}, {"start_s": 22304.941, "end_s": 22315.464, "action": "Scrolled through the Materials tray and clicked a swatch area, continuing to browse tile options without a clearly visible change to the model.", "intent": "Search for an alternative countertop material.", "app": "SketchUp", "details": "The model still visibly shows the checker countertop material."}, {"start_s": 22315.464, "end_s": 22325.624, "action": "Clicked and scrolled through the Materials tray, then selected Tile Grey; the countertop material changed from checkerboard to a uniform dark grey tiled surface.", "intent": "Replace the checker countertop finish with a grey tile material.", "app": "SketchUp", "details": "The Materials tray label reads Tile Grey and the grey countertop is visible."}, {"start_s": 22325.624, "end_s": 22337.089, "action": "Scrolled and changed the material selection to Slate, leaving the countertops dark slate-colored, then opened the Create Material dialog from the Materials tray.", "intent": "Continue refining the countertop material and begin creating or editing a custom material.", "app": "SketchUp", "details": "The span ends with SketchUp active and the Create Material window opening."}, {"start_s": 22337.089, "end_s": 22343.342, "action": "Adjusted the material view and dragged across the SketchUp model, then clicked within the material-editing interface before switching back to the main workspace.", "intent": "Modify or inspect a kitchen surface material.", "app": "SketchUp 2024", "details": "The Create Material dialog showed Material4 using a Slate.jpg texture over the kitchen countertop."}, {"start_s": 22343.342, "end_s": 22353.232, "action": "Returned to the SketchUp workspace, clicked and scrolled through the model, and zoomed out to review the complete kitchen and dining layout.", "intent": "Inspect the overall kitchen model after material editing.", "app": "SketchUp 2024", "details": "The view changed from a close countertop perspective to a full-room overview."}, {"start_s": 22353.232, "end_s": 22364.65, "action": "Scrolled and adjusted the camera around the kitchen, moving from the full-room view into a closer inspection of the countertop, sink, oven, cabinets, and dining table.", "intent": "Review kitchen details from different viewpoints.", "app": "SketchUp 2024", "details": "No geometry edits are clearly evidenced; the activity primarily changes the camera view."}, {"start_s": 22364.65, "end_s": 22374.632, "action": "Navigated closer to the left countertop and sink area, then clicked repeatedly around the drawer and cabinet edge while the view shifted slightly.", "intent": "Inspect or select cabinetry and countertop geometry.", "app": "SketchUp 2024", "details": "The close view shows the black countertop, sink, and drawer fronts."}, {"start_s": 22374.632, "end_s": 22384.458, "action": "Continued clicking and scrolling across the countertop and cabinet faces, moving the camera along the counter toward the sink and adjacent cabinetry.", "intent": "Inspect or select additional countertop and cabinet elements.", "app": "SketchUp 2024", "details": "The countertop edge and cabinet fronts remained the primary visible model features."}, {"start_s": 22384.458, "end_s": 22394.894, "action": "Scrolled and navigated from the sink area toward the oven and tall cabinet, then clicked repeatedly near the countertop edge and drawer fronts.", "intent": "Inspect or select the oven-side countertop and cabinetry.", "app": "SketchUp 2024", "details": "The final view focuses on the black countertop edge, oven-side drawers, and tall cabinet."}, {"start_s": 22394.894, "end_s": 22405.248, "action": "Scrolled extensively, clicked and dragged in the SketchUp model, and changed the camera from a close kitchen view to a wider overhead view.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "Materials tray remained open with Material4 selected."}, {"start_s": 22405.248, "end_s": 22415.91, "action": "Clicked and scrolled through the model, then orbited from the kitchen sink area toward a close view of the black countertop and drawers.", "intent": "Examine countertop and cabinetry geometry.", "app": "SketchUp 2024", "details": "The view ended focused on the countertop edge and drawer fronts."}, {"start_s": 22415.91, "end_s": 22426.062, "action": "Scrolled and clicked around the model, typed a space, then dragged and orbited to zoom out from the kitchen toward a distant whole-room view.", "intent": "Navigate and review the overall kitchen scene.", "app": "SketchUp 2024", "details": "The final view showed the complete kitchen with a standing figure component nearby."}, {"start_s": 22426.062, "end_s": 22436.271, "action": "Scrolled and orbited repeatedly, moving from the distant scene back into a close, elevated view of the sink, oven, counters, and backsplash.", "intent": "Reposition the camera for a closer kitchen inspection.", "app": "SketchUp 2024", "details": "The view ended on the kitchen corner and appliances."}, {"start_s": 22436.271, "end_s": 22444.992, "action": "Orbited and scrolled to widen the view, then clicked the model, leaving the kitchen and dining area visible with selected geometry highlighted in blue.", "intent": "Review the kitchen-dining layout and select model geometry.", "app": "SketchUp 2024", "details": "Blue selection outlines appeared across the backsplash and connected model edges."}, {"start_s": 22444.992, "end_s": 22463.321, "action": "Clicked in the Materials tray and opened its category dropdown, then left the category list expanded while the selected kitchen geometry remained highlighted.", "intent": "Browse material categories for the selected model geometry.", "app": "SketchUp 2024", "details": "The dropdown visibly listed categories including Colors, Glass and Mirrors, Metal, Tile, Water, and Wood."}, {"start_s": 22463.321, "end_s": 22474.367, "action": "Selected the paint-bucket tool and applied the Mosaic Hexagonal Tile material to the kitchen backsplash, changing it from blue linework to a multicolored tile pattern.", "intent": "Apply a tile material to the backsplash.", "app": "SketchUp 2024", "details": "The Materials tray shows Mosaic Hexagonal Tile after the application."}, {"start_s": 22474.367, "end_s": 22484.729, "action": "Scrolled through the SketchUp view and Materials tray, then zoomed out to review the tiled backsplash and the full kitchen layout.", "intent": "Inspect the material application and overall model.", "app": "SketchUp 2024", "details": "The kitchen, dining table, appliances, and tiled backsplash are visible in a wider view."}, {"start_s": 22484.729, "end_s": 22494.703, "action": "Scrolled and adjusted the camera from a close view of the oven and counter back toward the sink and backsplash area.", "intent": "Review the backsplash and kitchen surfaces from different viewpoints.", "app": "SketchUp 2024", "details": "The Mosaic Hexagonal Tile remains selected in the Materials tray."}, {"start_s": 22494.703, "end_s": 22503.161, "action": "Scrolled to adjust the camera and Materials tray while reviewing the kitchen and dining area; no clearly visible material application occurred.", "intent": "Browse materials and inspect the model.", "app": "SketchUp 2024", "details": "The model remains visible with the patterned backsplash and dining table."}, {"start_s": 22503.161, "end_s": 22512.529, "action": "Scrolled extensively through the Materials tray, browsing additional tile and surface swatches while keeping the kitchen model in view.", "intent": "Browse alternative materials for possible use.", "app": "SketchUp 2024", "details": "Various material thumbnails are shown; the backsplash remains unchanged."}, {"start_s": 22512.529, "end_s": 22523.304, "action": "Scrolled through the Materials tray and adjusted the view slightly to review the tiled backsplash, cabinets, sink, oven, and dining area.", "intent": "Continue inspecting materials and the kitchen design.", "app": "SketchUp 2024", "details": "The Mosaic Hexagonal Tile preview remains visible in the Materials tray."}, {"start_s": 22523.304, "end_s": 22533.28, "action": "Orbited and zoomed around the modeled kitchen and dining area using middle-button clicks and scroll gestures, changing from a wide view to a closer elevated perspective.", "intent": "Inspect the 3D kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "Materials tray remained open with Mosaic Hexagonal Tile selected."}, {"start_s": 22533.28, "end_s": 22553.28, "action": "Remained idle while displaying the elevated kitchen and dining-area view.", "intent": "Pause for review of the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 22553.28, "end_s": 22565.032, "action": "Resumed after a brief system-state change and scrolled to zoom out, revealing more of the model and the standing figure component.", "intent": "Adjust the camera view to inspect the model in a wider context.", "app": "SketchUp 2024", "details": "No model geometry changes are visible."}, {"start_s": 22565.032, "end_s": 22582.193, "action": "Used middle-button clicks and scroll gestures to zoom in on the kitchen, then zoomed back out to a wider view including the standing figure.", "intent": "Review the kitchen model at multiple zoom levels.", "app": "SketchUp 2024", "details": "Materials tray remained open."}, {"start_s": 22582.193, "end_s": 22596.119, "action": "Orbited and zoomed the scene through several views, shifting from a front perspective to a more centered view of the kitchen and dining table.", "intent": "Inspect the modeled room from alternate camera angles.", "app": "SketchUp 2024", "details": "No edits to model elements are evident."}, {"start_s": 22596.119, "end_s": 22605.984, "action": "Opened and selected the Terrazzo Tile Accent material, then zoomed and orbited toward the kitchen counter and sink area; briefly interacted with the surrounding window area while the material tool remained active.", "intent": "Prepare or inspect a material choice on the kitchen model.", "app": "SketchUp 2024", "details": "The Materials tray changed from Mosaic Hexagonal Tile to Terrazzo Tile Accent."}, {"start_s": 22605.984, "end_s": 22615.44, "action": "Clicked and dragged in the SketchUp kitchen model, then scrolled extensively to navigate from the full kitchen view into a close-up of the backsplash and countertop.", "intent": "Inspect the kitchen model from a closer viewpoint.", "app": "SketchUp 2024", "details": "The Materials tray remained open with Tile Linen selected."}, {"start_s": 22615.44, "end_s": 22627.51, "action": "Scrolled and clicked around the backsplash and countertop, then orbited and zoomed back to an elevated overview of the kitchen.", "intent": "Review the backsplash and overall kitchen layout from multiple viewpoints.", "app": "SketchUp 2024", "details": "The view progressed from a close backsplash view to an overhead view showing the cabinets, appliances, and dining area."}, {"start_s": 22627.51, "end_s": 22638.182, "action": "Scrolled and orbited around the kitchen, moving from the elevated overview toward the sink, cabinets, oven, and refrigerator while changing the viewing angle.", "intent": "Inspect the kitchen model from the right side and upper perspective.", "app": "SketchUp 2024", "details": "No clearly supported geometry edit was visible; navigation dominated the span."}, {"start_s": 22638.182, "end_s": 22647.728, "action": "Orbited and zoomed toward the sink and window area, then clicked the model and left-side wall/door region; a Windows Explorer window was resized or moved at the end.", "intent": "Inspect the sink and window area and adjust the workspace view.", "app": "SketchUp 2024", "details": "The final screenshot shows blue-highlighted model edges around the wall and doorway."}, {"start_s": 22647.728, "end_s": 22656.128, "action": "Orbited and zoomed around the selected kitchen model, moving between the sink/window close-up and a broader elevated view.", "intent": "Review the selected kitchen section from different angles.", "app": "SketchUp 2024", "details": "Blue selection edges remained visible around the wall and doorway before the view widened."}, {"start_s": 22656.128, "end_s": 22667.134, "action": "Clicked repeatedly on the window area, then orbited slightly; the window component became selected and remained highlighted with its bounding box.", "intent": "Select and inspect the kitchen window component.", "app": "SketchUp 2024", "details": "The final view is a close-up of the double window above the sink with the component selected."}, {"start_s": 22667.134, "end_s": 22676.55, "action": "Resized and interacted with the SketchUp window, clicked around the window model and material swatches, then hid a Windows Explorer window. Left the kitchen window visible with the Materials tray open.", "intent": "Adjust the workspace and prepare to modify the window materials.", "app": "SketchUp 2024", "details": "The Materials tray showed Wood Square Tile 02."}, {"start_s": 22676.55, "end_s": 22686.998, "action": "Clicked the window frame and material controls, changing the visible material selection to Wood Cherry Original. Orbited and adjusted the view to show the full double window above the sink.", "intent": "Apply or inspect a wood material on the window frame.", "app": "SketchUp 2024", "details": "The Materials tray was in the Wood category with Wood Cherry Original selected."}, {"start_s": 22686.998, "end_s": 22696.75, "action": "Clicked and orbited around the window, applying or sampling the selected wood material on inner frame surfaces while zooming and repositioning the view.", "intent": "Continue refining the window frame\u2019s wood finish.", "app": "SketchUp 2024", "details": "The inner jambs and sill visibly appeared dark wood while the outer frame remained selected."}, {"start_s": 22696.75, "end_s": 22706.398, "action": "Orbited and zoomed far out from the window to review the kitchen, then continued navigating until the entire room model was visible from an elevated angle.", "intent": "Review the window in the context of the overall kitchen model.", "app": "SketchUp 2024", "details": "The view changed from a close-up window inspection to a wide kitchen scene."}, {"start_s": 22706.398, "end_s": 22717.054, "action": "Navigated around the model to an exterior wall view, zoomed toward the double window, and clicked the window area and surrounding wall geometry.", "intent": "Inspect the window from the exterior side and select its surrounding geometry.", "app": "SketchUp 2024", "details": "The exterior view showed the window installed in a white wall, with the outer frame selected near the end."}, {"start_s": 22717.054, "end_s": 22724.952, "action": "Clicked and dragged on the window, navigated and zoomed out, then reviewed the selected window from a wider exterior perspective including the wall and nearby doorway.", "intent": "Review the completed window placement and material from outside the room.", "app": "SketchUp 2024", "details": "The final view showed the wood-trimmed double window on the exterior wall with the model and a scale figure visible."}, {"start_s": 22724.952, "end_s": 22731.546, "action": "Moved and resized a Windows Explorer window while leaving the SketchUp kitchen model visible.", "intent": "Adjust the workspace layout.", "app": "SketchUp 2024", "details": "The kitchen and dining model remained unchanged."}, {"start_s": 22731.546, "end_s": 22741.593, "action": "Zoomed into the kitchen model, then clicked the lower cabinetry and selected the cabinet assembly, highlighting its edges in blue.", "intent": "Inspect or select the kitchen cabinetry.", "app": "SketchUp 2024", "details": "The view moved from the full room to a close-up of the sink, oven, drawers, and counters."}, {"start_s": 22741.593, "end_s": 22751.509, "action": "Clicked repeatedly around the cabinet area and zoomed out, leaving a cabinet component selected within a translucent model view.", "intent": "Change the current selection and adjust the model view.", "app": "SketchUp 2024", "details": "The final view showed the selected cabinet area and the full kitchen at a distance."}, {"start_s": 22751.509, "end_s": 22761.376, "action": "Zoomed and repositioned the view, clicked the Materials tray, and selected the Wood Veneer 02 material.", "intent": "Prepare to apply or inspect a cabinet material.", "app": "SketchUp 2024", "details": "The Materials tray displayed Wood Veneer 02, and the model returned to a closer kitchen view."}, {"start_s": 22761.376, "end_s": 22771.365, "action": "Applied the selected wood veneer material to multiple cabinet and drawer faces while panning and zooming around the kitchen.", "intent": "Change the cabinetry finish.", "app": "SketchUp 2024", "details": "Previously white lower cabinet faces became brown wood-toned surfaces."}, {"start_s": 22771.365, "end_s": 22781.502, "action": "Zoomed in over the dining table and chairs, inspected the newly wood-finished cabinetry, then zoomed back to a wider kitchen view.", "intent": "Review the material change across the kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the brown lower cabinetry, dining set, refrigerator, and Materials tray."}, {"start_s": 22781.502, "end_s": 22792.014, "action": "Adjusted the SketchUp camera through repeated orbit, zoom, and pan gestures, moving from a close kitchen view to a distant overview of the furnished kitchen and dining area.", "intent": "Review the overall kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 22792.014, "end_s": 22801.669, "action": "Zoomed and orbited around the kitchen model, then changed the selected material in the Materials tray to Wood OSB while repositioning the view.", "intent": "Inspect the model and browse wood materials.", "app": "SketchUp 2024", "details": "The view ended in an elevated overview with Wood OSB shown in the Materials tray."}, {"start_s": 22801.669, "end_s": 22812.558, "action": "Selected the Select tool, manipulated the view with orbit and zoom gestures, and changed the upper cabinet faces to a light wood appearance while retaining the Wood OSB material selection.", "intent": "Inspect and adjust the visible cabinet finish.", "app": "SketchUp 2024", "details": "The final view showed the kitchen from farther away with light wood upper cabinets."}, {"start_s": 22812.558, "end_s": 22830.543, "action": "Zoomed in and orbited around the kitchen and dining set, moving from a broad room view to a close inspection of the dining table, chairs, and place settings.", "intent": "Inspect the furnished dining area and model details.", "app": "SketchUp 2024", "details": null}, {"start_s": 22830.543, "end_s": 22840.263, "action": "Clicked repeatedly on the dining set to select its grouped components, then zoomed slightly while keeping the table and chairs highlighted in blue.", "intent": "Select and inspect the dining furniture group.", "app": "SketchUp 2024", "details": "The dining table, chairs, and surrounding dining-set geometry were visibly selected."}, {"start_s": 22840.263, "end_s": 22850.488, "action": "Browsed materials and applied or previewed Wood Lumber Buttoned on the selected dining table, then zoomed and orbited for a closer view.", "intent": "Change or inspect the dining table material.", "app": "SketchUp 2024", "details": "The selected tabletop displayed a lighter wood texture, and the Materials tray showed Wood Lumber Buttoned."}, {"start_s": 22850.488, "end_s": 22860.253, "action": "Selected successive wood material swatches and applied them to the dining table, changing its surface from a dark wood finish to a lighter brown wood finish.", "intent": "Test and apply a wood material to the dining table.", "app": "SketchUp 2024", "details": "Materials tray showed Wood Floor Dark followed by Wood Bamboo."}, {"start_s": 22860.253, "end_s": 22870.63, "action": "Selected additional wood swatches and adjusted the view, then zoomed out to reveal the complete kitchen and dining-room model.", "intent": "Compare wood finishes and inspect the model in context.", "app": "SketchUp 2024", "details": "The table remained brown while the camera changed from a close view to a wide room view."}, {"start_s": 22870.63, "end_s": 22879.422, "action": "Orbit- and zoom-navigated around the model, moving from the wide room view to a close dining-table view and then back to an elevated overview.", "intent": "Review the model from multiple viewpoints.", "app": "SketchUp 2024", "details": "No clear geometry or material change was visible during the navigation."}, {"start_s": 22879.422, "end_s": 22889.511, "action": "Zoomed closely onto the tabletop and then pulled back while orbiting around the dining area and kitchen.", "intent": "Inspect the applied tabletop material and surrounding model.", "app": "SketchUp 2024", "details": "The close view showed the wood texture across the tabletop; the final view was a distant exterior-oriented perspective."}, {"start_s": 22889.511, "end_s": 22899.393, "action": "Orbit- and zoom-navigated back into the kitchen, bringing the dining set from a medium view to a closer front perspective.", "intent": "Reposition the camera for another inspection of the dining set.", "app": "SketchUp 2024", "details": "The table, place settings, chairs, and kitchen cabinetry remained visible."}, {"start_s": 22899.393, "end_s": 22909.663, "action": "Clicked repeatedly around the dining table and then orbited to a side view, leaving the table selected with a blue outline.", "intent": "Select or inspect the dining table from another angle.", "app": "SketchUp 2024", "details": "The final perspective showed the selected table and chairs from the side of the room."}, {"start_s": 22909.663, "end_s": 22919.639, "action": "Selected the dining table and clicked the Paint Bucket tool, leaving the table outlined in blue while the Materials tray remained open with \u201cWood Floor Dark\u201d shown.", "intent": "Prepare to inspect or apply materials to the dining table.", "app": "SketchUp 2024", "details": "Dining table scene remained visible; no definite material change was shown."}, {"start_s": 22919.639, "end_s": 22929.638, "action": "Scrolled and middle-dragged around the model to orbit and zoom from the dining area toward an overhead view, keeping the table selected.", "intent": "Adjust the camera to inspect the dining table and surrounding kitchen layout.", "app": "SketchUp 2024", "details": "The view moved from a close dining-table view to a high, angled overview."}, {"start_s": 22929.638, "end_s": 22940.287, "action": "Continued orbiting and zooming around the selected dining table, moving into close views of the tabletop, chairs, and nearby kitchen surfaces.", "intent": "Inspect the table and adjacent furniture from multiple angles.", "app": "SketchUp 2024", "details": "The final view became an extreme close-up of a light-colored surface."}, {"start_s": 22940.287, "end_s": 22950.918, "action": "Orbited and zoomed back out from the close-up, then selected the broader kitchen-and-dining model so the complete room appeared in a distant overview.", "intent": "Reframe the scene for an overall inspection.", "app": "SketchUp 2024", "details": "The final screenshot showed the entire kitchen and dining room in a small isometric view."}, {"start_s": 22950.918, "end_s": 22960.808, "action": "Scrolled and orbited around the room, then clicked the dining set; the final view moved closer and displayed the dining furniture enclosed by a blue selection box.", "intent": "Inspect and select the dining set within the room.", "app": "SketchUp 2024", "details": "The dining table and chairs were visibly selected in the final view."}, {"start_s": 22960.808, "end_s": 22970.695, "action": "Clicked repeatedly on the selected dining table and adjusted the view, leaving the table highlighted with blue edges and the table leg visibly showing a wood material.", "intent": "Inspect or apply the selected wood material to the dining table.", "app": "SketchUp 2024", "details": "No confirmed material application event was visible, but the table remained selected and its wood-colored leg was clearly shown."}, {"start_s": 22970.695, "end_s": 22983.393, "action": "Selected the dining table and adjusted the SketchUp view with repeated clicks, dragging, and scrolling.", "intent": "Inspect or reposition the dining table model in the scene.", "app": "SketchUp 2024", "details": "The dining table remained outlined in blue while the camera view changed slightly."}, {"start_s": 22983.393, "end_s": 22993.35, "action": "Selected the table and clicked wood material swatches, changing the visible table finish between wood textures.", "intent": "Apply and compare wood materials on the dining table.", "app": "SketchUp 2024", "details": "The Materials tray showed Wood Floor Parquet and Wood Floor Dark during the changes."}, {"start_s": 22993.35, "end_s": 23005.16, "action": "Continued clicking material swatches for the selected table, then scrolled through the Materials tray.", "intent": "Review additional wood material options for the table.", "app": "SketchUp 2024", "details": "The table stayed selected and the material field visibly changed to Wood Floor."}, {"start_s": 23005.16, "end_s": 23016.088, "action": "Navigated the SketchUp camera by dragging and scrolling, then used repeated keyboard inputs that changed the view from a close-up to a distant room view.", "intent": "Reframe the kitchen and dining area for inspection.", "app": "SketchUp 2024", "details": "The scene moved from the table close-up to a wide view of the modeled kitchen and dining area."}, {"start_s": 23016.088, "end_s": 23026.569, "action": "Continued keyboard navigation and scrolling to move back toward the dining area, then changed the table appearance to a dark finish.", "intent": "Inspect the model from a closer angle and adjust the table material.", "app": "SketchUp 2024", "details": "The final view showed the dining table with a nearly black top and dark legs."}, {"start_s": 23026.569, "end_s": 23035.487, "action": "Scrolled and used middle-button camera navigation to orbit and zoom out, ending on a wider view of the kitchen and dining set.", "intent": "Review the completed scene composition from an overall perspective.", "app": "SketchUp 2024", "details": "The final view clearly showed the kitchen, black dining table, place settings, chairs, and refrigerator."}, {"start_s": 23035.487, "end_s": 23045.59, "action": "Scrolled and clicked repeatedly around the dining table, selecting and adjusting focus on the table and front leg area.", "intent": "Inspect or select dining-room model components.", "app": "SketchUp 2024", "details": "Dining table and chairs remained visible; the front table leg was highlighted during selection."}, {"start_s": 23045.59, "end_s": 23055.774, "action": "Clicked repeatedly on the front table leg and tabletop, then selected the dining table so its edges and legs became outlined in blue.", "intent": "Select the dining table geometry for further editing.", "app": "SketchUp 2024", "details": "The complete tabletop and supporting legs were highlighted as one selected object."}, {"start_s": 23055.774, "end_s": 23066.719, "action": "Scrolled and middle-clicked to orbit or navigate around the model, moving from a close table view to a distant view of the kitchen and dining set.", "intent": "Change the camera view to inspect the room layout.", "app": "SketchUp 2024", "details": "The dining set became small in a zoomed-out view, with the table still selected."}, {"start_s": 23066.719, "end_s": 23075.368, "action": "Scrolled and middle-clicked to orbit and zoom back toward the dining set, bringing the table and chairs into a closer front-facing view.", "intent": "Refine the camera framing of the dining area.", "app": "SketchUp 2024", "details": "The final view centered the dining table and six chairs inside the kitchen."}, {"start_s": 23075.368, "end_s": 23086.022, "action": "Clicked the Materials tray and painted the selected table leg with the Wood Cherry Original material, then navigated closer around the chairs and leg.", "intent": "Apply a wood material to the table leg.", "app": "SketchUp 2024", "details": "The Materials tray showed Wood Cherry Original, and the leg changed from dark to brown/orange."}, {"start_s": 23086.022, "end_s": 23096.038, "action": "Middle-clicked and scrolled while orbiting around the chair and table leg, then clicked the nearby leg area with the paint tool active.", "intent": "Inspect and continue material application around the dining furniture.", "app": "SketchUp 2024", "details": "The camera moved through close-up views of the chair backs, table edge, and brown table leg."}, {"start_s": 23096.038, "end_s": 23106.734, "action": "Navigated around the SketchUp kitchen scene with orbiting and scrolling, moving from a wider dining-table view to a closer view of the chairs and table while the Materials tray remained open.", "intent": "Inspect the dining set from different viewpoints.", "app": "SketchUp 2024", "details": "The model remained visually unchanged; the Materials tray showed Wood Cherry Original."}, {"start_s": 23106.734, "end_s": 23116.575, "action": "Orbited and zoomed around the dining table, moving through close views of the place settings and chairs before pulling back to show the table within the kitchen enclosure.", "intent": "Review the dining area model from multiple angles.", "app": "SketchUp 2024", "details": "No clear material or geometry change was visible."}, {"start_s": 23116.575, "end_s": 23126.505, "action": "Orbit-zoomed over the dining table, briefly moving close to the table leg and chair bases, then returned to an elevated view of the fully set table.", "intent": "Inspect table and chair geometry from close and elevated views.", "app": "SketchUp 2024", "details": "The Materials tray stayed open and the model appearance remained unchanged."}, {"start_s": 23126.505, "end_s": 23136.264, "action": "Continued orbiting and zooming around the table, shifting from an overhead place-setting view to close views of the tabletop, chairs, and wooden table leg.", "intent": "Examine dining furniture details.", "app": "SketchUp 2024", "details": "No definite edit was identifiable from the clicks and drags."}, {"start_s": 23136.264, "end_s": 23146.11, "action": "Scrolled and orbited extensively, moving away from the furniture to a largely empty view and then pulling back to a wide view of the kitchen and dining set.", "intent": "Reframe and inspect the overall room model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen and dining table from outside; no model change was apparent."}, {"start_s": 23146.11, "end_s": 23153.414, "action": "Orbited and zoomed back toward the dining furniture, ending on a close view of the wooden table leg and adjacent chair legs.", "intent": "Inspect the table-leg area at close range.", "app": "SketchUp 2024", "details": "The Materials tray remained open with Wood Cherry Original selected."}, {"start_s": 23153.414, "end_s": 23165.741, "action": "Scrolled extensively through the SketchUp model, transitioning from a blank close view to an isometric view of the kitchen and dining-room model.", "intent": "Navigate the 3D scene to locate and inspect the modeled room.", "app": "SketchUp 2024", "details": "The Materials tray remained open with Wood Cherry Original selected."}, {"start_s": 23165.741, "end_s": 23173.557, "action": "Orbited and adjusted the camera around the model, moving from an elevated view to a clearer perspective of the kitchen and dining area.", "intent": "Inspect the room layout from different angles.", "app": "SketchUp 2024", "details": "The kitchen cabinetry, dining table, appliances, and scale figure became more visible."}, {"start_s": 23173.557, "end_s": 23181.188, "action": "Zoomed and orbited closer into the kitchen, bringing the counters, sink, stove, cabinets, refrigerator, and dining table into a detailed view.", "intent": "Examine the kitchen model and its furnishings more closely.", "app": "SketchUp 2024", "details": "No geometry or material change was visibly made."}, {"start_s": 23181.188, "end_s": 23189.763, "action": "Adjusted the camera around the kitchen and dining set, then zoomed back slightly to frame most of the room.", "intent": "Review the modeled space from a broader interior perspective.", "app": "SketchUp 2024", "details": "The view ended with the kitchen and dining table both visible."}, {"start_s": 23189.763, "end_s": 23201.694, "action": "Navigated toward the upper kitchen cabinets, selected a cabinet panel, and selected the Wood OSB material from the Materials tray, leaving the panel highlighted.", "intent": "Prepare to apply or edit a material on the selected cabinet panel.", "app": "SketchUp 2024", "details": "The selected material changed from Wood Cherry Original to Wood OSB; the cabinet panel remained outlined in blue."}, {"start_s": 23201.694, "end_s": 23217.442, "action": "Opened the Create Material dialog for the selected Wood OSB material and dragged within the color controls before clicking near the dialog controls.", "intent": "Edit the appearance settings of the selected material.", "app": "SketchUp 2024", "details": "The dialog showed Material5, the Wood_OSB.jpg texture, texture dimensions, color controls, opacity, and OK/Cancel buttons."}, {"start_s": 23217.442, "end_s": 23227.586, "action": "Adjusted the SketchUp camera around the kitchen model with orbit, pan, and zoom gestures while the Materials tray remained open; the view moved from a close-up of the upper cabinets to a slightly wider angled view.", "intent": "Inspect the kitchen cabinetry and surrounding layout from different angles.", "app": "SketchUp", "details": "The selected upper cabinet and Material5 texture were visible during the camera adjustments."}, {"start_s": 23227.586, "end_s": 23237.818, "action": "Zoomed and orbited outward to reveal the full kitchen and dining area, including the refrigerator, table, chairs, counters, and appliances.", "intent": "Review the overall kitchen scene and its spatial arrangement.", "app": "SketchUp", "details": "The camera transitioned from a close cabinet view to a broad room view."}, {"start_s": 23237.818, "end_s": 23247.244, "action": "Continued zooming out and orbiting around the model, briefly showing the entire room from a distant corner before settling on an elevated angled view.", "intent": "Examine the complete room model from an exterior perspective.", "app": "SketchUp", "details": "No geometry or material edits were visibly made."}, {"start_s": 23247.244, "end_s": 23259.972, "action": "Zoomed back toward the kitchen and dining set, changing from the distant room view to a closer perspective focused on the counters, oven, refrigerator, and table setting.", "intent": "Inspect the kitchen and dining details at a closer scale.", "app": "SketchUp", "details": "The Materials tray remained open on the right."}, {"start_s": 23259.972, "end_s": 23277.988, "action": "Adjusted the camera through repeated zoom gestures, moving between wider and closer views of the kitchen and dining area and ending on a medium-wide perspective.", "intent": "Refine the viewing angle for reviewing the modeled interior.", "app": "SketchUp", "details": "The scene geometry and furnishings remained unchanged."}, {"start_s": 23277.988, "end_s": 23287.434, "action": "Orbited and zoomed around the kitchen model, briefly pulling back to a high overhead view and then returning to a closer angled view of the counters, appliances, dining table, and chairs.", "intent": "Inspect the complete kitchen layout from multiple final viewpoints.", "app": "SketchUp", "details": "The final view emphasized the kitchen work area and set dining table."}, {"start_s": 23287.434, "end_s": 23297.676, "action": "Selected the oven/cabinet area, navigated the 3D view, and applied the dark gray material to the selected model surfaces.", "intent": "Adjust the kitchen model\u2019s material appearance.", "app": "SketchUp 2024", "details": "Materials tray showed 0135_DarkGray selected."}, {"start_s": 23297.676, "end_s": 23308.243, "action": "Navigated from the oven close-up to a wider kitchen view, then orbited and zoomed toward the oven, counter, and dining table.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "Orbit tool was active during the later view changes."}, {"start_s": 23308.243, "end_s": 23318.314, "action": "Orbited and zoomed around the kitchen, moving from the dining area toward a closer view of the sink, counter, backsplash, and oven before returning to a wider view.", "intent": "Review the modeled kitchen layout and details.", "app": "SketchUp 2024", "details": null}, {"start_s": 23318.314, "end_s": 23328.092, "action": "Adjusted the camera around the room and selected the floor/perimeter geometry, leaving the floor edges highlighted in blue.", "intent": "Inspect or select the kitchen floor geometry.", "app": "SketchUp 2024", "details": "The selected floor boundary was visible in the final view."}, {"start_s": 23328.092, "end_s": 23337.819, "action": "Navigated closer to the sink and oven area, selected the floor/perimeter region, and changed the active material to 0136_Charcoal.", "intent": "Prepare or apply a darker material to the selected model area.", "app": "SketchUp 2024", "details": "The Materials tray showed 0136_Charcoal selected."}, {"start_s": 23337.819, "end_s": 23348.169, "action": "Opened the Asphalt and Concrete materials category, selected Blacktop New, and applied it to the selected floor/perimeter surface.", "intent": "Apply a blacktop-style material to the selected kitchen floor or edge surface.", "app": "SketchUp 2024", "details": "The final Materials tray showed Blacktop New."}, {"start_s": 23348.169, "end_s": 23357.931, "action": "Scrolled through the SketchUp kitchen model and clicked several visible surfaces, changing the selected material from Concrete Aggregate Smoke to Blacktop Old 02 while adjusting the view from a close-up to a wider kitchen view.", "intent": "Review and apply materials to selected kitchen model surfaces.", "app": "SketchUp 2024", "details": "Materials tray remained open on the right."}, {"start_s": 23357.931, "end_s": 23368.547, "action": "Scrolled and clicked multiple floor and cabinet-base surfaces, applying or previewing Concrete Scored Jointless and then Asphalt New; kept the view focused on the lower cabinets and flooring.", "intent": "Test surface materials on the kitchen model.", "app": "SketchUp 2024", "details": "Selected material names changed in the Materials tray."}, {"start_s": 23368.547, "end_s": 23379.86, "action": "Scrolled through the model and clicked the lower cabinet plinth and floor-area surfaces, changing the selected material to Concrete Form 4x8; then zoomed back to a wider view of the kitchen and dining area.", "intent": "Continue assigning and reviewing materials on the cabinet base.", "app": "SketchUp 2024", "details": "The kitchen, dining table, and blue model edges remained visible."}, {"start_s": 23379.86, "end_s": 23390.463, "action": "Adjusted the camera with middle-mouse navigation and scrolled, then clicked a floor-area surface and selected Blacktop Old 01 in the Materials tray.", "intent": "Inspect the model from a broader angle and choose a floor material.", "app": "SketchUp 2024", "details": "The Materials tray showed Blacktop Old 01 after the click."}, {"start_s": 23390.463, "end_s": 23400.692, "action": "Pressed space and dragged across the model, used middle-mouse navigation and scrolling to zoom out, then switched to orbit navigation and rotated to a closer view of the kitchen and dining area.", "intent": "Reframe and inspect the completed kitchen model.", "app": "SketchUp 2024", "details": "The camera moved from a distant full-room view to a close perspective."}, {"start_s": 23400.692, "end_s": 23411.602, "action": "Continued navigating the SketchUp camera with scrolling and middle-mouse drags, rotating and zooming to settle on a wide elevated view of the kitchen and dining area.", "intent": "Review the overall 3D model composition.", "app": "SketchUp 2024", "details": "The Materials tray showed Default while the final view displayed the full room."}, {"start_s": 23411.602, "end_s": 23420.307, "action": "Navigated around the SketchUp kitchen model with middle-clicks and repeated scroll input, changing from a closer kitchen view to a wider view of the full room.", "intent": "Inspect the overall kitchen layout from different camera distances.", "app": "SketchUp 2024", "details": null}, {"start_s": 23420.307, "end_s": 23428.643, "action": "Orbited and zoomed around the kitchen model, moving from the dining table and counters to a high, wider overhead view.", "intent": "Review the room arrangement and furnishings from above.", "app": "SketchUp 2024", "details": null}, {"start_s": 23428.643, "end_s": 23438.946, "action": "Orbited and zoomed toward the counter area, progressively focusing on the sink, window, dish rack, and adjacent oven.", "intent": "Inspect the kitchen sink and surrounding counter details.", "app": "SketchUp 2024", "details": null}, {"start_s": 23438.946, "end_s": 23449.178, "action": "Selected the double sink and repeatedly clicked within it while entering short keyboard inputs; left the sink component visibly selected in the close-up view.", "intent": "Attempt to interact with or edit the sink geometry.", "app": "SketchUp 2024", "details": "The selected sink is shown with blue edges and dotted geometry."}, {"start_s": 23449.178, "end_s": 23458.371, "action": "Continued interacting with the sink and nearby model geometry, then navigated to a wider counter view; a Push/Pull attempt displayed \u201cCannot Push/Pull curved or smoothed surfaces,\u201d after which the counter assembly was selected.", "intent": "Attempt to modify the sink or counter geometry despite the curved-surface limitation.", "app": "SketchUp 2024", "details": "SketchUp displayed an explicit curved-or-smoothed-surface error."}, {"start_s": 23458.371, "end_s": 23467.975, "action": "Clicked and scrolled around the selected counter and sink, then activated the Paint Bucket tool and clicked the selected cabinet/counter area; the geometry remained outlined in blue.", "intent": "Attempt to apply or sample a material on the counter assembly.", "app": "SketchUp 2024", "details": "The Paint Bucket tool was active at the end of the span."}, {"start_s": 23467.975, "end_s": 23478.471, "action": "Orbit and zoom around the kitchen model, selecting and inspecting cabinet and countertop areas while changing the camera view.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": "Visible kitchen scene with Materials tray open."}, {"start_s": 23478.471, "end_s": 23489.103, "action": "Zoom into the left drawer unit, select the upper drawer, and adjust the view to show the drawer fronts and adjacent countertop.", "intent": "Inspect the left-side cabinetry.", "app": "SketchUp 2024", "details": "Upper drawer is outlined in blue in the later view."}, {"start_s": 23489.103, "end_s": 23499.16, "action": "Orbit around the sink and cabinetry, select drawer and cabinet surfaces, and switch the Materials tray to Wood with Wood Veneer 02 visible.", "intent": "Inspect or prepare cabinet surfaces for material editing.", "app": "SketchUp 2024", "details": "Wood Veneer 02 is shown in the Materials tray."}, {"start_s": 23499.16, "end_s": 23509.039, "action": "Use the paint tool on the cabinet side, then orbit and zoom out to review the full kitchen and dining area.", "intent": "Apply or inspect a wood material on the cabinetry.", "app": "SketchUp 2024", "details": "The cabinet side is highlighted with a stippled selection/paint appearance."}, {"start_s": 23509.039, "end_s": 23518.983, "action": "Orbit and zoom across the countertop, sink, oven, and corner cabinetry to review the kitchen model from close and wider angles.", "intent": "Review the kitchen layout and cabinet material appearance.", "app": "SketchUp 2024", "details": "Wood Veneer 02 remains selected in the Materials tray."}, {"start_s": 23518.983, "end_s": 23528.895, "action": "Zoom into the oven-side drawers, select cabinet surfaces, and use the paint tool on the narrow side panel beside the drawers.", "intent": "Apply or inspect the wood material on the oven-side cabinetry.", "app": "SketchUp 2024", "details": "The narrow side panel is visibly stippled/highlighted in the final view."}, {"start_s": 23528.895, "end_s": 23538.271, "action": "Navigated around the SketchUp kitchen model with orbit and zoom gestures, changing from a close dining-area view to a wider kitchen perspective.", "intent": "Review the model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 23538.271, "end_s": 23548.399, "action": "Orbited and zoomed toward the sink and lower cabinets, then pulled back to a broader view of the kitchen and dining table.", "intent": "Inspect the kitchen cabinetry and sink area.", "app": "SketchUp 2024", "details": null}, {"start_s": 23548.399, "end_s": 23558.129, "action": "Zoomed farther out and orbited upward to frame the complete kitchen, dining table, refrigerator, and surrounding walls.", "intent": "Review the overall room layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 23558.129, "end_s": 23562.807, "action": "Selected the floor or room geometry, leaving the model visibly highlighted, and opened the Materials category menu.", "intent": "Prepare to choose a different material for the selected surface.", "app": "SketchUp 2024", "details": "The Materials menu displayed categories including Tile, Water, and Wood."}, {"start_s": 23562.807, "end_s": 23575.559, "action": "Kept the Materials category menu open briefly, then selected Tile and waited while the material library loaded; the SketchUp window was subsequently hidden.", "intent": "Switch the material library to tile options.", "app": "SketchUp 2024", "details": "The selected floor remained highlighted and the Tile category was shown before the app was hidden."}, {"start_s": 23575.559, "end_s": 23585.313, "action": "Returned to SketchUp, selected a tile material thumbnail, and painted the kitchen floor; the floor changed to a brown tile texture while the Tile Limestone Multi material appeared in the tray.", "intent": "Apply a tile finish to the kitchen floor.", "app": "SketchUp 2024", "details": "The floor visibly updated from gray to a patterned brown tile surface."}, {"start_s": 23585.313, "end_s": 23594.631, "action": "Navigated the SketchUp kitchen model by scrolling and adjusting the view, then clicked in the model area to change the displayed selection state.", "intent": "Inspect the kitchen model and reposition the view.", "app": "SketchUp 2024", "details": "Kitchen scene with cabinets, appliances, dining table, and tiled floor remained visible."}, {"start_s": 23594.631, "end_s": 23605.457, "action": "Clicked and dragged in the model, scrolled through the Materials tray, and selected the floor area; the model became semi-transparent while the material swatches were browsed.", "intent": "Select the floor and browse available materials.", "app": "SketchUp 2024", "details": "Materials tray remained open on the right, with the floor area highlighted or selected."}, {"start_s": 23605.457, "end_s": 23615.999, "action": "Scrolled the Materials tray, selected a tile swatch, and applied it to the kitchen floor; the tray showed Tile Ceramic Natural before another material swatch was selected.", "intent": "Test different floor materials on the kitchen model.", "app": "SketchUp 2024", "details": "The floor remained selected and displayed a light ceramic tile pattern."}, {"start_s": 23615.999, "end_s": 23624.049, "action": "Applied the selected Wood Square Tile 01 material to the floor, then scrolled and adjusted the camera to review the result from a wider angle.", "intent": "Change the floor finish to a wood tile material and inspect it.", "app": "SketchUp 2024", "details": "The entire floor visibly changed to a brown square wood-tile pattern."}, {"start_s": 23624.049, "end_s": 23634.665, "action": "Scrolled and adjusted the camera closer around the dining area, clicking and dragging in the model while reviewing the applied wood floor.", "intent": "Inspect the wood floor material across the kitchen and dining area.", "app": "SketchUp 2024", "details": "The wood-tile floor and dining table were shown from a closer perspective."}, {"start_s": 23634.665, "end_s": 23646.055, "action": "Scrolled through the Materials tray and adjusted the view, then clicked the Tile Limestone Multi swatch without visibly applying it to the model.", "intent": "Browse another material option while reviewing the model.", "app": "SketchUp 2024", "details": "The floor still displayed the brown wood-tile material; Tile Limestone Multi was selected in the tray at the end."}, {"start_s": 23646.055, "end_s": 23656.823, "action": "Adjusted the SketchUp camera with orbiting, scrolling, and middle-click navigation, changing from a wider kitchen view to another angled view while keeping the Materials tray visible.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp", "details": "The Tile Limestone Multi material remained shown in the Materials tray."}, {"start_s": 23656.823, "end_s": 23666.913, "action": "Zoomed and orbited around the kitchen model, moving into a close view of the counters, appliances, dining table, and chairs before returning to a wider perspective.", "intent": "Review the kitchen layout and details.", "app": "SketchUp", "details": null}, {"start_s": 23666.913, "end_s": 23676.399, "action": "Orbited and zoomed the SketchUp camera around the furnished kitchen, shifting between wider and closer angled views of the cabinetry, dining set, and refrigerator.", "intent": "Examine the model from alternate viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 23676.399, "end_s": 23686.888, "action": "Continued orbiting and scrolling to reposition the camera, ending on a wider view of the kitchen interior and dining area.", "intent": "Inspect the overall kitchen scene.", "app": "SketchUp", "details": null}, {"start_s": 23686.888, "end_s": 23697.951, "action": "Navigated the camera through several zoomed and angled views of the kitchen, then clicked the upper-right tray control and hid the SketchUp application interface area.", "intent": "Review the model and clear the side panel for a larger view.", "app": "SketchUp", "details": "The Materials tray was no longer visible in the final screenshot."}, {"start_s": 23697.951, "end_s": 23707.575, "action": "Continued orbiting and zooming the kitchen model after the tray was hidden, settling on an angled view showing the cabinetry, appliances, tiled floor, and dining table.", "intent": "Inspect the completed kitchen model in a larger viewport.", "app": "SketchUp", "details": null}, {"start_s": 23707.575, "end_s": 23717.591, "action": "Orbited the SketchUp camera around the modeled kitchen and dining area, shifting to a slightly different elevated perspective.", "intent": "Inspect the 3D kitchen layout from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 23717.591, "end_s": 23727.735, "action": "Continued orbiting around the kitchen model and adjusted the view to a higher, more distant angle.", "intent": "Review the overall room arrangement and furniture placement.", "app": "SketchUp 2024", "details": null}, {"start_s": 23727.735, "end_s": 23736.343, "action": "Orbited the scene again, bringing the kitchen counters, appliances, and dining table into a more front-facing view.", "intent": "Examine the modeled interior from another viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 23736.343, "end_s": 23742.263, "action": "Rotated the camera around the room and settled on an elevated perspective showing the cabinetry, appliances, refrigerator, and dining set.", "intent": "Inspect the complete kitchen model and its composition.", "app": "SketchUp 2024", "details": null}, {"start_s": 23742.263, "end_s": 23751.367, "action": "Zoomed far out from the kitchen model and continued adjusting the camera, leaving the room small within the larger SketchUp workspace.", "intent": "Change viewing scale to inspect the model in its surrounding scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 23751.367, "end_s": 23761.744, "action": "Continued zooming and orbiting around the distant kitchen model, ending on a wider elevated view of the room and dining area.", "intent": "Review the model from a broad overall perspective.", "app": "SketchUp 2024", "details": null}, {"start_s": 23761.744, "end_s": 23767.445, "action": "Scrolled through the SketchUp model view and clicked once, leaving the kitchen scene displayed from a slightly adjusted perspective.", "intent": "Inspect the 3D kitchen model from a different view.", "app": "SketchUp 2024", "details": "Visible model includes cabinetry, appliances, sink, dining table, chairs, and kitchen flooring."}, {"start_s": 23767.445, "end_s": 23787.445, "action": "Remained inactive while the SketchUp kitchen model stayed visible.", "intent": "Pause while viewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 23787.445, "end_s": 23807.445, "action": "Continued viewing the unchanged SketchUp kitchen scene without recorded interaction.", "intent": "Review the displayed 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 23807.445, "end_s": 23827.445, "action": "Remained inactive with the same kitchen model view on screen.", "intent": "Continue observing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 23827.445, "end_s": 23847.445, "action": "Stayed on the SketchUp model view without recorded interaction; the system later registered idle and resume state changes.", "intent": "Pause during model review.", "app": "SketchUp 2024", "details": "The displayed kitchen scene remained unchanged."}, {"start_s": 23847.445, "end_s": 23867.445, "action": "Remained inactive while the unchanged SketchUp kitchen model stayed on screen.", "intent": "Continue viewing the 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 23867.445, "end_s": 23874.281, "action": "Resized and moved a Windows Explorer window while leaving the SketchUp kitchen model visible.", "intent": "Adjust the desktop window layout.", "app": "Windows Explorer / SketchUp 2024", "details": null}, {"start_s": 23874.281, "end_s": 23885.45, "action": "Remained idle while the desktop environment resumed and system connectivity and power state changed; then resized a Windows Explorer window.", "intent": "Wait during system state changes and adjust the window layout.", "app": "SketchUp 2024 / Windows Explorer", "details": null}, {"start_s": 23885.45, "end_s": 23894.845, "action": "Pressed a key, scrolled, and middle-clicked in the SketchUp viewport to orbit the kitchen model from a closer angled view to a more frontal view.", "intent": "Inspect the 3D kitchen model from another viewpoint.", "app": "SketchUp 2024", "details": "The camera changed to a more distant, frontal view of the kitchen and dining area."}, {"start_s": 23894.845, "end_s": 23904.703, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom the SketchUp camera out, reducing the kitchen model to a small view near the axes; then clicked the standing figure, leaving it selected.", "intent": "Navigate the 3D scene and select an object for inspection.", "app": "SketchUp 2024", "details": "The standing human figure was outlined in blue in the final view."}, {"start_s": 23904.703, "end_s": 23914.566, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom back toward the kitchen model, changing the camera to several closer frontal and angled views.", "intent": "Reframe and inspect the kitchen model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen cabinets, appliances, dining table, and chairs more prominently."}, {"start_s": 23914.566, "end_s": 23934.566, "action": "Scrolled briefly and then remained inactive with the SketchUp kitchen model displayed in a close angled view.", "intent": "Review the current 3D model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 23934.566, "end_s": 23948.471, "action": "Resized the Windows Explorer window while viewing the SketchUp kitchen model.", "intent": "Adjust the desktop window layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 23948.471, "end_s": 23957.963, "action": "Zoomed and adjusted the camera view to bring the full kitchen and dining area into view, then continued navigating the model.", "intent": "Inspect the kitchen model from different scales and angles.", "app": "SketchUp 2024", "details": "System configuration changes occurred during the span."}, {"start_s": 23957.963, "end_s": 23967.857, "action": "Zoomed closely toward the dining table and chairs, then switched to the orbit tool and pulled back to a distant overall view.", "intent": "Examine the dining set and reposition the 3D viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 23967.857, "end_s": 23979.41, "action": "Orbited and zoomed around the kitchen model, moving from the dining area toward the sink and cabinetry before settling on an elevated overall view.", "intent": "Review the kitchen layout from multiple perspectives.", "app": "SketchUp 2024", "details": null}, {"start_s": 23979.41, "end_s": 23989.371, "action": "Continued orbiting and zooming around the room, shifting between wider and closer views of the kitchen, doorway, refrigerator, and dining table.", "intent": "Inspect the 3D interior from alternate viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 23989.371, "end_s": 23999.37, "action": "Selected the kitchen model and dragged it, leaving the entire model highlighted in blue; clicked within the selection and entered text input.", "intent": "Manipulate or prepare the selected model for editing.", "app": "SketchUp 2024", "details": "The final view shows the complete kitchen assembly selected with a move operation active."}, {"start_s": 23999.37, "end_s": 24009.321, "action": "Adjusted the SketchUp camera view through repeated middle-click and scroll gestures, ending on a closer view of the modeled kitchen and dining area.", "intent": "Inspect the kitchen model from a more suitable viewing angle and distance.", "app": "SketchUp", "details": "The visible model remained unchanged while the viewpoint moved closer."}, {"start_s": 24009.321, "end_s": 24018.019, "action": "Continued adjusting the SketchUp camera with scroll gestures, settling on a slightly wider view of the kitchen and dining table.", "intent": "Refine the model view for inspection.", "app": "SketchUp", "details": "No geometry or materials visibly changed."}, {"start_s": 24018.019, "end_s": 24038.019, "action": "Paused with the SketchUp kitchen scene displayed.", "intent": "Review the current model view.", "app": "SketchUp", "details": "No interaction events were recorded."}, {"start_s": 24038.019, "end_s": 24055.401, "action": "Opened the View menu and displayed its visibility and display options over the SketchUp model.", "intent": "Access view or display settings.", "app": "SketchUp", "details": "The menu included items such as Hidden Geometry, Hidden Objects, Section Planes, Section Cuts, Axes, Guides, Shadows, Fog, Edge Style, and Face Style."}, {"start_s": 24055.401, "end_s": 24068.049, "action": "Interacted with the open SketchUp menu, hid or resized the application window, and then returned focus to the model window.", "intent": "Manage the SketchUp window and menu state.", "app": "SketchUp", "details": "The application window was resized to 1297x511; the kitchen model remained visible."}, {"start_s": 24068.049, "end_s": 24077.577, "action": "Used middle-click and scroll gestures to orbit and adjust the camera, ending on a closer angled view of the kitchen and dining table.", "intent": "Inspect the model from another perspective.", "app": "SketchUp", "details": "The orbit tool was active at the end, and the model geometry remained unchanged."}, {"start_s": 24077.577, "end_s": 24087.473, "action": "Adjusted the SketchUp camera through repeated middle-clicks and scrolls, orbiting around the kitchen cabinetry, sink, oven, and dining area.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": "The view shifted from an elevated close-up toward a more frontal view of the kitchen."}, {"start_s": 24087.473, "end_s": 24097.607, "action": "Continued orbiting and zooming around the kitchen model, then switched from Scene 1 to Scene 2.", "intent": "Review the alternate saved scene and kitchen perspective.", "app": "SketchUp 2024", "details": "Scene 2 became visible while the model remained centered on the sink, oven, and cabinets."}, {"start_s": 24097.607, "end_s": 24109.378, "action": "Clicked around the Scene 2 view and zoomed far out to reveal the complete kitchen and dining-room model within the room shell.", "intent": "View the overall room layout.", "app": "SketchUp 2024", "details": "The final view showed the full room, including cabinets, appliances, dining table, chairs, and surrounding axes."}, {"start_s": 24109.378, "end_s": 24117.799, "action": "Orbited and zoomed the model from the distant overview toward the dining table and kitchen, while an Explorer window was briefly moved or resized.", "intent": "Inspect the dining and kitchen arrangement from another angle.", "app": "SketchUp 2024", "details": "The view ended on a closer elevated perspective of the dining table and kitchen."}, {"start_s": 24117.799, "end_s": 24130.514, "action": "Restored the SketchUp window, then orbited and zoomed to a high, top-down view showing the sink wall, cabinets, appliances, refrigerator, tiled floor, and dining table.", "intent": "Review the complete floor plan and furniture placement.", "app": "SketchUp 2024", "details": "The view progressed from a closer dining perspective to a broad overhead layout."}, {"start_s": 24130.514, "end_s": 24140.416, "action": "Continued rotating and zooming the Scene 2 model from overhead, centering the kitchen counters and dining table in progressively wider views.", "intent": "Examine the overall kitchen-dining composition from above.", "app": "SketchUp 2024", "details": "The final view showed the room shell, sink and counter run, right-side appliances, tiled floor, and dining set."}, {"start_s": 24140.416, "end_s": 24150.096, "action": "Scrolled and orbited around the kitchen model, then opened the context menu for the active scene tab.", "intent": "Inspect the model and access scene-management options.", "app": "SketchUp", "details": "The scene context menu displayed Move Left, Move Right, Add, Update, Rename, Delete, Play Animation, and Scenes."}, {"start_s": 24150.096, "end_s": 24158.528, "action": "Selected the Scene 3 tab and adjusted the view to show the kitchen from a wider perspective.", "intent": "Review another saved scene of the kitchen model.", "app": "SketchUp", "details": "Scene 3 became active and showed the full kitchen, dining table, appliances, and cabinetry."}, {"start_s": 24158.528, "end_s": 24168.561, "action": "Zoomed and orbited toward the kitchen work area, then switched to Scene 4.", "intent": "Inspect the kitchen layout from a closer saved viewpoint.", "app": "SketchUp", "details": "The view moved closer to the sink, stove, cabinets, refrigerator, and dining table before Scene 4 became active."}, {"start_s": 24168.561, "end_s": 24178.135, "action": "Opened and dismissed the Scene 4 context menu, then zoomed and adjusted the camera around the kitchen model.", "intent": "Review scene options and refine the model viewpoint.", "app": "SketchUp", "details": "The Scene 4 menu showed scene-management commands; the final view remained on the kitchen and dining area."}, {"start_s": 24178.135, "end_s": 24192.84, "action": "Continued orbiting and zooming around the kitchen, briefly resized or moved another window, typed a single \u201cb,\u201d and returned focus to SketchUp.", "intent": "Navigate the model and restore the SketchUp workspace.", "app": "SketchUp", "details": "The model view shifted from a closer kitchen view to a more distant perspective; SketchUp was active again at the end."}, {"start_s": 24192.84, "end_s": 24202.143, "action": "Activated the Materials tray and scrolled through tile material swatches while keeping the kitchen model visible.", "intent": "Browse available materials for possible application to the model.", "app": "SketchUp", "details": "The Default Tray showed Materials with \u201cTile Limestone Multi\u201d selected; the visible swatches changed during scrolling."}, {"start_s": 24202.143, "end_s": 24213.201, "action": "Clicked and scrolled through the Components tray, then opened its collection dropdown.", "intent": "Browse available component collections.", "app": "SketchUp 2024", "details": "The kitchen model remained unchanged; the collection menu opened over the Components tray."}, {"start_s": 24213.201, "end_s": 24222.523, "action": "Selected the SMLC collection and scrolled through its component listings.", "intent": "Review available kitchen component assets.", "app": "SketchUp 2024", "details": "The tray displayed appliance entries including 1-EV1ER M60 CLC2 and 1-FOUR H60 CLC2."}, {"start_s": 24222.523, "end_s": 24240.227, "action": "Scrolled the component list, closed the Default Tray, and resized the SketchUp window before returning focus to the model.", "intent": "Adjust the workspace while browsing components.", "app": "SketchUp 2024", "details": "The model view stayed unchanged and the tray was later hidden."}, {"start_s": 24240.227, "end_s": 24251.101, "action": "Returned to SketchUp, then moved and repeatedly resized the application window.", "intent": "Reposition and resize the SketchUp workspace.", "app": "SketchUp 2024", "details": "The Default Tray showed Styles with Ambient Occlusion selected."}, {"start_s": 24251.101, "end_s": 24260.801, "action": "Waited while system and window configuration changes occurred, then clicked a style thumbnail in the Styles tray.", "intent": "Change the model display style.", "app": "SketchUp 2024", "details": "The selected style changed from Ambient Occlusion to Details."}, {"start_s": 24260.801, "end_s": 24271.49, "action": "Scrolled the Styles tray, selected another style, and dragged across the style thumbnails.", "intent": "Preview and choose an alternate visual style.", "app": "SketchUp 2024", "details": "The model changed from a white line view to the Dark Pen style with blue chairs and tableware."}, {"start_s": 24271.49, "end_s": 24282.394, "action": "Scrolled and middle-clicked within the SketchUp model to orbit the kitchen scene, changing the camera to a slightly closer view.", "intent": "Adjust the 3D camera view for inspection.", "app": "SketchUp", "details": "Kitchen model remained visible while the viewpoint shifted."}, {"start_s": 24282.394, "end_s": 24291.777, "action": "Scrolled and middle-clicked to further adjust the kitchen model view, briefly pressed Space, and right- and left-clicked near the model before hiding the application.", "intent": "Continue navigating and inspecting the 3D scene.", "app": "SketchUp", "details": "The view ended on a closer perspective of the kitchen and dining table."}, {"start_s": 24291.777, "end_s": 24300.003, "action": "Right- and left-clicked near the viewport, then middle-clicked and scrolled to orbit the model; switched to Scene 5 and ended on a more frontal view of the kitchen.", "intent": "Change the saved scene and adjust the camera for another inspection angle.", "app": "SketchUp", "details": "Scene 5 became selected and the model was shown from a frontal angle."}, {"start_s": 24300.003, "end_s": 24311.083, "action": "Scrolled to adjust the view, clicked a style thumbnail in the Styles panel, and changed the kitchen rendering from textured exterior shading to a white-background interior style.", "intent": "Experiment with presentation styles for the model.", "app": "SketchUp", "details": "The model appearance changed to a mostly white interior-style rendering."}, {"start_s": 24311.083, "end_s": 24319.081, "action": "Clicked successive style thumbnails and scrolled the Styles panel, changing the rendering through Pencil and Paper and Colored Clay appearances.", "intent": "Compare alternate visual styles for the kitchen model.", "app": "SketchUp", "details": "The final visible style was Colored Clay with muted green and beige surfaces."}, {"start_s": 24319.081, "end_s": 24328.616, "action": "Clicked and dragged across additional style thumbnails, switching the rendering from Dark Pen to Details.", "intent": "Continue testing line and shading styles for the model.", "app": "SketchUp", "details": "The final view showed the kitchen as a white line-rendered Details style."}, {"start_s": 24328.616, "end_s": 24338.92, "action": "Adjusted the SketchUp camera through middle-click orbiting and brief scroll inputs, changing the kitchen model from an angled view to a higher overhead view.", "intent": "Inspect the kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 24338.92, "end_s": 24349.747, "action": "Continued orbiting the SketchUp camera with middle-click inputs, then returned to the Select tool; the kitchen model remained in an elevated perspective view.", "intent": "Refine and review the model viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 24349.747, "end_s": 24358.77, "action": "Switched from Scene 5 to Scene 6 and clicked style thumbnails in the Default Tray, changing the kitchen from an uncolored line view to a colored interior presentation.", "intent": "Apply and preview a different scene and visual style.", "app": "SketchUp 2024", "details": "Scene 6 became active; the model displayed colored cabinetry, flooring, appliances, and furniture."}, {"start_s": 24358.77, "end_s": 24368.825, "action": "Clicked additional style thumbnails in the Default Tray, cycling the kitchen model through Pencil and Paper and Stained Sketch appearances.", "intent": "Compare alternate SketchUp display styles.", "app": "SketchUp 2024", "details": "The model changed from a shaded sketch appearance to a more heavily outlined sketch style."}, {"start_s": 24368.825, "end_s": 24377.217, "action": "Scrolled within the style tray and selected further style thumbnails, changing the model to Dark Pen and then back to a colored Interior style.", "intent": "Continue comparing and select a preferred visual style.", "app": "SketchUp 2024", "details": "The final visible state was a colored kitchen presentation with wood cabinetry, tiled flooring, and a dark dining table."}, {"start_s": 24377.217, "end_s": 24384.248, "action": "Selected two more style thumbnails in the Default Tray, switching the model from the colored Interior appearance to Pencil and Paper and then Simple Style.", "intent": "Preview additional display styles for the model.", "app": "SketchUp 2024", "details": "The final view showed the kitchen in a light gray, simplified shaded style."}, {"start_s": 24384.248, "end_s": 24395.801, "action": "Clicked the Styles tray controls, leaving the kitchen model displayed in a colored interior view.", "intent": "Adjust the model\u2019s visual style.", "app": "SketchUp", "details": null}, {"start_s": 24395.801, "end_s": 24405.801, "action": "Opened the Styles controls and selected alternate style thumbnails, changing the kitchen model to a pencil-and-paper appearance.", "intent": "Preview and choose a different display style.", "app": "SketchUp", "details": "The SketchUp window was briefly hidden and resized during the interaction."}, {"start_s": 24405.801, "end_s": 24418.195, "action": "Selected another Styles thumbnail to restore the colored Interior view, then used the middle mouse button to orbit the kitchen model slightly.", "intent": "Refine the model presentation and viewpoint.", "app": "SketchUp", "details": null}, {"start_s": 24418.195, "end_s": 24427.688, "action": "Orbited and zoomed the kitchen model to a closer angle, then right-clicked the Scene 6 tab to open its context menu.", "intent": "Adjust the camera view and manage the scene tab.", "app": "SketchUp", "details": "The scene context menu displayed options including Move, Add, Update, Rename, Delete, and Play Animation."}, {"start_s": 24427.688, "end_s": 24447.124, "action": "Selected a scene-related command from the context menu, switched to Scene 7, and adjusted the view while resizing the SketchUp window.", "intent": "Change the active scene and review its camera view.", "app": "SketchUp", "details": "The model remained visible while the window was hidden and resized."}, {"start_s": 24447.124, "end_s": 24456.347, "action": "Returned to SketchUp and played the scene animation; the Animation controls appeared while the camera moved through progressively closer kitchen views.", "intent": "Preview the scene animation.", "app": "SketchUp", "details": "The Animation window showed Pause and Stop controls."}, {"start_s": 24456.347, "end_s": 24476.347, "action": "Remained inactive while SketchUp displayed the kitchen model, with the view changing from a colored overhead perspective to an untextured view.", "intent": "Reviewed the current SketchUp model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 24476.347, "end_s": 24494.478, "action": "Clicked the Scene 1 tab several times, changing the model to a closer kitchen perspective, then clicked near the upper-right area and returned focus to SketchUp.", "intent": "Navigate between saved SketchUp scenes and maintain the modeling view.", "app": "SketchUp 2024", "details": "The displayed model alternated between overhead and close kitchen views."}, {"start_s": 24494.478, "end_s": 24508.675, "action": "Dragged and scrolled in the modeling viewport to orbit and adjust the camera, bringing the full kitchen and dining area into a more frontal perspective.", "intent": "Inspect the kitchen layout from a different viewing angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 24508.675, "end_s": 24518.258, "action": "Switched to the recorder window, then used middle-button navigation and scrolling to zoom and orbit the SketchUp model far away from the kitchen.", "intent": "Adjust the 3D camera view for inspection.", "app": "SketchUp 2024", "details": "The model became a very small object near the origin."}, {"start_s": 24518.258, "end_s": 24528.329, "action": "Continued middle-button navigation and scrolling, keeping the kitchen model distant while repositioning the viewport around the axes.", "intent": "Continue adjusting the 3D view.", "app": "SketchUp 2024", "details": null}, {"start_s": 24528.329, "end_s": 24536.055, "action": "Scrolled and orbited the viewport to bring the kitchen back into a large overhead perspective, then clicked the Scene 7 tab to display another saved view.", "intent": "Restore a usable model view and switch to Scene 7.", "app": "SketchUp 2024", "details": "The final view shows the colored kitchen and dining area from above."}, {"start_s": 24536.055, "end_s": 24545.273, "action": "Adjusted the SketchUp kitchen model view with repeated scrolls and middle-click navigation, changing the zoom and perspective.", "intent": "Review the 3D kitchen model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 24545.273, "end_s": 24560.864, "action": "Navigated the SketchUp model view, then initiated Save As and switched to the Save As window.", "intent": "Save the active kitchen model under a new name.", "app": "SketchUp 2024", "details": "The Save As window became active at the end of the span."}, {"start_s": 24560.864, "end_s": 24576.475, "action": "Edited the Save As filename field, entered a revised name, and activated Save, opening a confirmation prompt for the existing KITCHEN2.skp file.", "intent": "Save the model as KITCHEN2.skp and handle the existing-file prompt.", "app": "SketchUp 2024", "details": "The Save As dialog showed KITCHEN2.skp in the filename field."}, {"start_s": 24576.475, "end_s": 24581.759, "action": "Reviewed the Confirm Save As prompt stating that KITCHEN2.skp already exists, then clicked Yes to replace it.", "intent": "Confirm replacement of the existing SketchUp file.", "app": "SketchUp 2024", "details": "The overwrite confirmation dialog was visible."}, {"start_s": 24581.759, "end_s": 24596.583, "action": "Returned to the SketchUp model after saving; the title changed from KITCHEN2* to KITCHEN2, indicating the file was saved, and clicked in the modeling area.", "intent": "Complete the save operation and resume working in the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 24596.583, "end_s": 24615.201, "action": "Selected the Orbit tool and repeatedly navigated the 3D view with middle-click and scroll gestures, rotating and zooming the kitchen model to new perspectives.", "intent": "Inspect the saved kitchen model from different 3D viewpoints.", "app": "SketchUp 2024", "details": "The final view showed the kitchen cabinetry, appliances, dining table, and chairs from a shifted perspective."}, {"start_s": 24615.201, "end_s": 24619.676, "action": "Switched to SketchUp, dismissed the printer dialog, and returned to the kitchen model view.", "intent": "Return from print setup to the SketchUp model.", "app": "SketchUp", "details": "The printer dialog showed Microsoft Print to PDF with Current view selected before it was closed."}, {"start_s": 24619.676, "end_s": 24634.619, "action": "Opened the SketchUp print preview, adjusted the preview zoom, and closed the preview window.", "intent": "Review the printable appearance of the kitchen model.", "app": "SketchUp", "details": "Print preview displayed Page 1 with the kitchen model; no print command was completed."}, {"start_s": 24634.619, "end_s": 24642.499, "action": "Returned to the SketchUp model and clicked in the viewport, changing the camera to a closer, more frontal kitchen view.", "intent": "Adjust the model view for inspection.", "app": "SketchUp", "details": "The kitchen layout remained visible with cabinetry, appliances, dining table, and chairs."}, {"start_s": 24642.499, "end_s": 24646.583, "action": "Switched back to SketchUp and opened the printer dialog over the kitchen model.", "intent": "Reopen print settings for the current model view.", "app": "SketchUp", "details": "Microsoft Print to PDF was selected with Current view and one copy shown."}, {"start_s": 24646.583, "end_s": 24654.599, "action": "Opened the print preview and repeatedly adjusted its zoom to inspect the page composition.", "intent": "Review and enlarge the printable model preview.", "app": "SketchUp", "details": "The preview remained on Page 1 and showed the kitchen model centered on the page."}, {"start_s": 24654.599, "end_s": 24674.599, "action": "Remained idle while viewing the SketchUp print preview.", "intent": "Continue reviewing the print preview.", "app": "SketchUp", "details": "No interaction events were recorded; the enlarged Page 1 preview remained visible."}, {"start_s": 24674.599, "end_s": 24681.412, "action": "Resized and repositioned the Windows Explorer window several times while the SketchUp print preview remained visible.", "intent": "Adjust the window layout while reviewing the SketchUp print preview.", "app": "Windows Explorer", "details": "Network status changes also occurred; the preview content remained unchanged."}, {"start_s": 24681.412, "end_s": 24690.929, "action": "Scrolled within the SketchUp print preview, shifting the kitchen rendering vertically on the page.", "intent": "Review different portions of the printed kitchen rendering.", "app": "SketchUp", "details": "Eight scroll events were recorded with no horizontal movement."}, {"start_s": 24690.929, "end_s": 24709.292, "action": "Scrolled through the SketchUp print preview several times, then clicked and dragged near the preview window's upper-right close control.", "intent": "Continue reviewing the preview and begin closing or manipulating the preview window.", "app": "SketchUp", "details": "The preview remained open at the end of the span."}, {"start_s": 24709.292, "end_s": 24718.561, "action": "Returned to the main SketchUp model and used middle-button clicks with scroll gestures to orbit and adjust the camera around the kitchen scene.", "intent": "Reorient and inspect the 3D kitchen model from different viewpoints.", "app": "SketchUp", "details": "The print preview closed and the full modeling workspace became visible."}, {"start_s": 24718.561, "end_s": 24729.016, "action": "Continued orbiting and zooming the SketchUp camera, changing from a front perspective to a higher, more top-down view of the kitchen and dining area.", "intent": "Inspect the modeled kitchen layout from an elevated perspective.", "app": "SketchUp", "details": "No model geometry was visibly edited."}, {"start_s": 24729.016, "end_s": 24738.935, "action": "Zoomed farther out and orbited the model, then dragged across the scene to select the kitchen geometry, leaving the entire model highlighted blue.", "intent": "View the complete model and select its geometry.", "app": "SketchUp", "details": "The final view showed the kitchen model selected in blue."}, {"start_s": 24738.935, "end_s": 24748.832, "action": "Selected and repositioned the kitchen model, then clicked to finish the move; the SketchUp file became modified and the view changed slightly.", "intent": "Adjust the model placement in the SketchUp scene.", "app": "SketchUp 2024", "details": "The kitchen and dining-room model remained visible in a 3D view."}, {"start_s": 24748.832, "end_s": 24760.834, "action": "Orbited and adjusted the 3D view with middle-button drags and scrolls, changing from an outlined view to a shaded kitchen perspective.", "intent": "Inspect the kitchen model from different angles.", "app": "SketchUp 2024", "details": "The shaded kitchen includes cabinetry, sink, appliances, flooring, and a dining table."}, {"start_s": 24760.834, "end_s": 24770.832, "action": "Opened the SketchUp print workflow, displayed the printer dialog, and opened the print preview showing the current kitchen view on a page.", "intent": "Prepare the current SketchUp view for printing or PDF output.", "app": "SketchUp 2024", "details": "The printer destination was Microsoft Print to PDF; the preview showed one page."}, {"start_s": 24770.832, "end_s": 24781.089, "action": "Scrolled within the print preview and adjusted the preview display to inspect the page and kitchen image at different scales.", "intent": "Review the print-preview layout before printing.", "app": "SketchUp 2024", "details": "The preview remained on Page 1 with the kitchen model centered on the page."}, {"start_s": 24781.089, "end_s": 24790.762, "action": "Continued scrolling and adjusting the print-preview view, keeping the kitchen rendering visible while changing its on-screen scale.", "intent": "Further inspect the print-preview rendering.", "app": "SketchUp 2024", "details": "No print confirmation or file-save dialog appeared."}, {"start_s": 24790.762, "end_s": 24800.903, "action": "Scrolled the print preview and clicked Zoom In repeatedly, enlarging the kitchen image on the preview page.", "intent": "Zoom in to inspect details of the print preview.", "app": "SketchUp 2024", "details": "The preview ended with a closer view of the cabinets, sink, dining table, and appliances."}, {"start_s": 24800.903, "end_s": 24811.818, "action": "Scrolled through the SketchUp print preview of the kitchen model, then clicked near the preview toolbar and continued scrolling.", "intent": "Review the print preview and adjust its view.", "app": "SketchUp", "details": null}, {"start_s": 24811.818, "end_s": 24823.55, "action": "Continued scrolling through the kitchen print preview, then clicked near the left side of the preview window.", "intent": "Review the rendered kitchen page before leaving the preview.", "app": "SketchUp", "details": null}, {"start_s": 24823.55, "end_s": 24831.618, "action": "Opened the \u201cSave Print Output As\u201d dialog and clicked the file name field, typed \u201cki,\u201d then deleted the typed characters.", "intent": "Prepare a filename for saving the print output.", "app": "SketchUp", "details": "The dialog was in Documents and set to save a PDF."}, {"start_s": 24831.618, "end_s": 24845.548, "action": "Typed \u201cKITCHEN2\u201d into the filename field, interacted with the file type suggestions, and clicked within the save dialog before returning to the SketchUp window.", "intent": "Name the print output and proceed with the save operation.", "app": "SketchUp", "details": "The save dialog showed KITCHEN2 and PDF Document (*.pdf)."}, {"start_s": 24845.548, "end_s": 24859.521, "action": "Returned to SketchUp, opened the File menu, and initiated printing; SketchUp displayed a printing status for document KITCHEN2 using Microsoft Print to PDF, then opened the Export Model dialog.", "intent": "Print the kitchen model and begin an export operation.", "app": "SketchUp", "details": "The export dialog was opened with KITCHEN2 as the filename and COLLADA File (*.dae) as the type."}, {"start_s": 24859.521, "end_s": 24879.521, "action": "Waited with the \u201cExport Model\u201d dialog open, showing the KITCHEN2 filename and COLLADA File (*.dae) format.", "intent": "Review or prepare the model export settings.", "app": "SketchUp", "details": "The Export, Options, and Cancel controls remained visible; no export confirmation was recorded."}, {"start_s": 24879.521, "end_s": 24885.393, "action": "Displayed the Export Model dialog for the KITCHEN2 SketchUp model with the filename KITCHEN2 and COLLADA File (*.dae) selected, then clicked the dialog close button.", "intent": "Close the pending model export dialog.", "app": "SketchUp 2024", "details": "The export dialog remained visible after the clicks."}, {"start_s": 24885.393, "end_s": 24893.161, "action": "Returned to SketchUp, opened the File menu, and navigated to the 3D Warehouse submenu while briefly interacting with the application window.", "intent": "Inspect SketchUp file and sharing options.", "app": "SketchUp 2024", "details": "The kitchen model remained visible and the File menu was open at the end."}, {"start_s": 24893.161, "end_s": 24907.501, "action": "Kept the File menu open, opened Export, and exposed the 2D Graphic export option.", "intent": "Choose a 2D graphic export for the kitchen model.", "app": "SketchUp 2024", "details": "The Export submenu showed 3D Model, 2D Graphic, Section Slice, and Animation."}, {"start_s": 24907.501, "end_s": 24913.045, "action": "Opened the Export 2D Graphic save dialog from SketchUp, showing the Documents folder, filename KITCHEN2, and JPEG Image (*.jpg) as the file type.", "intent": "Prepare to export the model view as a JPEG image.", "app": "SketchUp 2024", "details": "The dialog displayed an Export button and the existing Documents contents."}, {"start_s": 24913.045, "end_s": 24932.103, "action": "Adjusted the SketchUp view by zooming and middle-button navigation, then interacted with the scene tabs and opened the scene context menu with Play Animation highlighted.", "intent": "Review the model view and access scene animation controls.", "app": "SketchUp 2024", "details": "The kitchen model changed from a distant view to a closer perspective; the scene context menu was visible at the end."}, {"start_s": 24932.103, "end_s": 24939.985, "action": "Dragged to reposition the SketchUp window and continued manipulating the view while the Animation controller appeared; the displayed camera view advanced to a closer kitchen perspective.", "intent": "Play and review the scene animation.", "app": "SketchUp 2024", "details": "The Animation panel showed Pause and Stop, and the kitchen camera view progressed during the span."}, {"start_s": 24939.985, "end_s": 24959.985, "action": "Remained idle while SketchUp displayed the kitchen model as the view changed between rendered and linework scenes.", "intent": "Review the current kitchen design.", "app": "SketchUp 2024", "details": null}, {"start_s": 24959.985, "end_s": 24975.815, "action": "Allowed the SketchUp scene animation to continue through several camera views, then clicked the Animation Stop control.", "intent": "Preview and stop the model scene animation.", "app": "SketchUp 2024", "details": "The kitchen model remained visible while the camera moved to a closer rendered view."}, {"start_s": 24975.815, "end_s": 24985.009, "action": "Used middle-mouse clicks and scroll gestures to orbit and zoom the SketchUp camera around the kitchen and dining area.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2024", "details": "The view moved from a wide room view to a closer perspective focused on the counters and dining table."}, {"start_s": 24985.009, "end_s": 24994.843, "action": "Continued orbiting and zooming the camera with middle-mouse clicks and scroll gestures, moving to elevated and more distant views of the kitchen.", "intent": "Review the overall room layout.", "app": "SketchUp 2024", "details": "The full kitchen, dining table, cabinets, appliances, and tiled floor remained visible."}, {"start_s": 24994.843, "end_s": 25004.663, "action": "Adjusted the camera repeatedly with middle-mouse clicks and scroll gestures, returning to a medium-wide perspective of the kitchen and dining set.", "intent": "Refine the inspection viewpoint.", "app": "SketchUp 2024", "details": "No model geometry was visibly edited."}, {"start_s": 25004.663, "end_s": 25011.802, "action": "Used additional scroll gestures to make small camera-view adjustments while keeping the kitchen and dining area in frame.", "intent": "Continue reviewing the 3D model.", "app": "SketchUp 2024", "details": "The final view showed the counters, sink, stove, refrigerator, dining table, and chairs."}, {"start_s": 25011.802, "end_s": 25031.802, "action": "Remained inactive while displaying the SketchUp kitchen model in an isometric view.", "intent": "Review the existing 3D kitchen scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 25031.802, "end_s": 25051.802, "action": "Remained inactive while the same SketchUp kitchen model stayed visible.", "intent": "Continue reviewing the model.", "app": "SketchUp 2024", "details": "System resume and configuration changes were recorded near the end of the span."}, {"start_s": 25051.802, "end_s": 25071.802, "action": "Remained inactive while displaying the kitchen model.", "intent": "Review the existing scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 25071.802, "end_s": 25081.342, "action": "Scrolled and middle-clicked in the modeling viewport, zooming the kitchen scene out substantially.", "intent": "Adjust the 3D view for inspection.", "app": "SketchUp 2024", "details": "The model became smaller within the viewport."}, {"start_s": 25081.342, "end_s": 25092.726, "action": "Scrolled and middle-clicked repeatedly in the viewport, orbiting and zooming the kitchen model farther out; clicked near the Scene 1 tab area during the view adjustments.", "intent": "Navigate and inspect the 3D scene from different views.", "app": "SketchUp 2024", "details": "The kitchen remained visible but progressively smaller and farther from the camera."}, {"start_s": 25092.726, "end_s": 25099.054, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom the model, leaving the kitchen scene small and viewed from a changed angle.", "intent": "Continue adjusting the model viewpoint.", "app": "SketchUp 2024", "details": "The viewport ended on a distant angled view of the kitchen."}, {"start_s": 25099.054, "end_s": 25119.054, "action": "Remain inactive while SketchUp displays a small architectural model in the 3D workspace.", "intent": "No active interaction; maintain the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 25119.054, "end_s": 25139.054, "action": "Remain idle in SketchUp as the system resumes after brief screen, network, power, input-source, and memory-state changes.", "intent": "Continue viewing the model without editing it.", "app": "SketchUp 2024", "details": "System-level state changes were recorded near the end of the span."}, {"start_s": 25139.054, "end_s": 25159.054, "action": "Remain inactive while the same small architectural model stays visible in the 3D workspace.", "intent": "No active interaction; maintain the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 25159.054, "end_s": 25179.054, "action": "Remain idle in SketchUp as the system resumes after brief screen, network, power, input-source, and memory-state changes.", "intent": "Continue viewing the model without editing it.", "app": "SketchUp 2024", "details": "System-level state changes were recorded near the beginning of the span."}, {"start_s": 25179.054, "end_s": 25199.054, "action": "Remain inactive while SketchUp continues showing the small architectural model and scene tabs.", "intent": "No active interaction; maintain the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 25199.054, "end_s": 25219.054, "action": "Remain inactive with the SketchUp 3D workspace unchanged and the architectural model visible.", "intent": "No active interaction; maintain the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 25219.054, "end_s": 25225.061, "action": "Scrolled within the SketchUp modeling viewport while the small kitchen model remained visible.", "intent": "Adjust the viewport view of the model.", "app": "SketchUp", "details": null}, {"start_s": 25225.061, "end_s": 25245.061, "action": "Remained idle in SketchUp with the kitchen model visible in the viewport.", "intent": "Pause while viewing the model.", "app": "SketchUp", "details": null}, {"start_s": 25245.061, "end_s": 25259.36, "action": "Resumed viewing SketchUp and made several scroll inputs without a clear visible change to the kitchen model.", "intent": "Continue navigating the modeling viewport.", "app": "SketchUp", "details": "System state changes were recorded during the interval, but no specific modeling edit was visible."}, {"start_s": 25259.36, "end_s": 25272.546, "action": "Used middle-click and scroll inputs to navigate the SketchUp viewport, changing the displayed model view; then opened the File menu and moved to Import.", "intent": "Navigate the model and begin an import operation.", "app": "SketchUp", "details": "The File menu's Import submenu was visible at the end of the span."}, {"start_s": 25272.546, "end_s": 25281.507, "action": "Opened the Import file dialog in Documents and scrolled through the available files and folders.", "intent": "Browse for a file to import into SketchUp.", "app": "SketchUp", "details": "The dialog remained open with the file name field showing Untitled."}, {"start_s": 25281.507, "end_s": 25294.709, "action": "Navigated the Import dialog to Downloads, scrolled through the file list, selected \"aparna autocad plan(for students)\", and clicked Import.", "intent": "Choose a drawing file for import into SketchUp.", "app": "SketchUp", "details": "The selected file was shown as an AutoCAD drawing; the dialog remained visible as SketchUp became active again."}, {"start_s": 25294.709, "end_s": 25303.471, "action": "Dismissed the Import Results dialog in SketchUp, then navigated the model view with scroll and middle-button interactions.", "intent": "Review the completed import and inspect the imported model.", "app": "SketchUp", "details": "Import Results reported imported AutoCAD entities before the dialog was closed."}, {"start_s": 25303.471, "end_s": 25313.486, "action": "Scrolled through the SketchUp view to reposition the model, then clicked the visible floor-plan geometry, leaving it highlighted in blue.", "intent": "Navigate to and select imported floor-plan geometry.", "app": "SketchUp", "details": "Multiple plan layouts became visible during navigation."}, {"start_s": 25313.486, "end_s": 25322.961, "action": "Used middle-button view navigation and scrolling to zoom and orbit across the imported layouts, changing from a close plan view to a wider overview.", "intent": "Inspect the imported layouts from different views.", "app": "SketchUp", "details": "The overview showed several floor plans and a small furnished room model."}, {"start_s": 25322.961, "end_s": 25332.481, "action": "Continued orbiting and scrolling around the SketchUp scene, reducing the visible model to a small furnished room near the axes.", "intent": "Reposition the camera for model inspection.", "app": "SketchUp", "details": "No geometry edits were visible."}, {"start_s": 25332.481, "end_s": 25341.03, "action": "Scrolled and orbited toward the furnished room model, bringing it closer into view and then shifting it toward the left edge of the workspace.", "intent": "Inspect the furnished room model from a closer view.", "app": "SketchUp", "details": "The room showed furnishings, walls, and a floor surface."}, {"start_s": 25341.03, "end_s": 25353.336, "action": "Waited in the SketchUp workspace with the furnished room partially visible at the left; performed a final scroll and hovered over the horizontal slice tool.", "intent": "Continue reviewing the model and position a sectioning tool.", "app": "SketchUp", "details": "The status bar identified the hovered tool as slicing horizontally through connected faces at a selected level."}, {"start_s": 25353.336, "end_s": 25363.774, "action": "Typed \u201cR\u201d and clicked twice near the drawing area, creating a small rectangular face in SketchUp.", "intent": "Create a rectangular face or begin geometry construction.", "app": "SketchUp 2024", "details": "A small rectangular outline appeared near the center of the modeling area."}, {"start_s": 25363.774, "end_s": 25382.726, "action": "Selected the small rectangular face, opened its context menu, and then dismissed the menu while leaving the face selected.", "intent": "Inspect or access editing options for the newly created face.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, and other face-editing commands."}, {"start_s": 25382.726, "end_s": 25391.088, "action": "Scrolled repeatedly to zoom in on the selected rectangular face.", "intent": "Adjust the view for closer editing of the geometry.", "app": "SketchUp 2024", "details": "The selected face became larger in the modeling viewport."}, {"start_s": 25391.088, "end_s": 25401.422, "action": "Typed \u201cP\u201d, clicked the face, and activated a face-editing tool, producing a solid rectangular block from the planar face.", "intent": "Extrude the rectangular face into three-dimensional geometry.", "app": "SketchUp 2024", "details": "The Push/Pull-style interface appeared with an offset value and the face became a block."}, {"start_s": 25401.422, "end_s": 25419.243, "action": "Confirmed the extrusion, manipulated the view and geometry with clicks and scrolling, and switched to the 1001bit.com Slope Edges tool.", "intent": "Prepare the block for slope-edge editing.", "app": "SketchUp 2024", "details": "The block was enlarged in view with selected edges, and the Slope Edges tool became active."}, {"start_s": 25419.243, "end_s": 25425.296, "action": "Opened the 1001bit.com Slope Edges dialog over the SketchUp model.", "intent": "Configure slope-edge parameters for the selected model edges.", "app": "SketchUp 2024", "details": "The dialog showed distance, height, angle, gradient, mode options, and an Exit button."}, {"start_s": 25425.296, "end_s": 25439.646, "action": "Adjusted the SketchUp view with clicks, scrolling, and middle-button navigation around the selected rectangular solid, then switched to the Slope Edges plugin window.", "intent": "Inspect and position the model for slope-edge editing.", "app": "SketchUp 2024", "details": "The selected solid remained visible with its upper edges highlighted."}, {"start_s": 25439.646, "end_s": 25454.991, "action": "Returned to the SketchUp model, selected an upper edge, and activated the slope-edge tool; the prompt requested a starting level or exact Z level.", "intent": "Prepare a selected edge for slope editing.", "app": "SketchUp 2024", "details": "The Slope Edges tool prompt was visible and the model remained selected."}, {"start_s": 25454.991, "end_s": 25469.279, "action": "Navigated the model, changed the view, and used the slope-edge tool on the solid; the resulting view showed the rectangular solid without the earlier selection bounding box.", "intent": "Apply or configure a sloping-edge operation on the model.", "app": "SketchUp 2024", "details": "The status bar identified the tool as automatically sloping or creating a sloping path with fixed gradient."}, {"start_s": 25469.279, "end_s": 25478.946, "action": "Selected and manipulated an upper/front edge with clicks and a short drag, then adjusted the view and switched away from the model window.", "intent": "Continue positioning or editing the slope edge.", "app": "SketchUp 2024", "details": "The front upper edge became highlighted blue and the model remained a plain rectangular solid."}, {"start_s": 25478.946, "end_s": 25487.718, "action": "Opened the 1001bit.com Slope Edges dialog over SketchUp and clicked within the dialog area.", "intent": "Open the slope-edge parameters for configuration.", "app": "SketchUp 2024", "details": "The dialog showed Distance on plan 4925.00, Height 0.00, Angle of slope 0.000, and Gradient 1 to Infinity."}, {"start_s": 25487.718, "end_s": 25506.512, "action": "Edited the Height field by deleting its value and later typing 500.", "intent": "Set the slope height parameter.", "app": "SketchUp 2024", "details": "The Slope Edges dialog remained open; the Height field was blank at the sampled view after deletion, before the later 500 entry."}, {"start_s": 25506.512, "end_s": 25518.59, "action": "Edited the Slope Edges dialog fields, entering 45 in the angle field and clicking within the dialog before selecting the SketchUp workspace.", "intent": "Adjust slope-edge parameters for the model.", "app": "SketchUp", "details": "The dialog showed distance 4925.00, height 500, gradient 9.850, and the move-vertices option selected."}, {"start_s": 25518.59, "end_s": 25526.054, "action": "Returned to the SketchUp model and clicked the geometry; a warning appeared stating that more than two open edges were present and the tool would stop at the first edge.", "intent": "Apply the slope-edge operation to the selected model geometry.", "app": "SketchUp", "details": "A modal warning dialog was visible."}, {"start_s": 25526.054, "end_s": 25537.006, "action": "Dismissed the warning and navigated around the model with orbit and view interactions, changing the visible solid from a rectangular block to an angled wedge-like form.", "intent": "Inspect the resulting model geometry after the tool warning.", "app": "SketchUp", "details": "The warning was no longer visible and the model remained in the SketchUp workspace."}, {"start_s": 25537.006, "end_s": 25547.249, "action": "Continued orbiting and zooming the SketchUp view, then zoomed far out to reveal the angled solid together with the larger kitchen model in the scene.", "intent": "Review the modified geometry in relation to the rest of the scene.", "app": "SketchUp", "details": "The final view showed both the small wedge-like solid and a distant kitchen assembly."}, {"start_s": 25547.249, "end_s": 25553.152, "action": "Orbited and zoomed toward the angled solid, clicked the model, and continued view navigation until the object moved out of the visible workspace.", "intent": "Inspect or reposition the camera around the modified solid.", "app": "SketchUp", "details": "The model was visible in an enlarged side view before the final navigation left the workspace mostly empty."}, {"start_s": 25553.152, "end_s": 25571.351, "action": "Navigated the camera around the SketchUp scene and zoomed out, leaving the kitchen model small on the left side of the workspace.", "intent": "Review the overall scene and model placement.", "app": "SketchUp", "details": "System configuration and resource-change events occurred during the span; no corresponding UI interaction was shown."}, {"start_s": 25571.351, "end_s": 25585.609, "action": "Clicked and scrolled in the SketchUp workspace, then activated a drawing tool and typed \u201cR.\u201d", "intent": "Prepare or adjust a drawing operation in the model.", "app": "SketchUp 2024", "details": "The kitchen model remained visible at left while the drawing cursor was active."}, {"start_s": 25585.609, "end_s": 25596.519, "action": "Clicked around the workspace and repeatedly selected a rectangular face, briefly hiding the application before returning to the model.", "intent": "Select and manipulate a newly created planar object.", "app": "SketchUp 2024", "details": "A white rectangular face appeared to the right of the kitchen model and was selected."}, {"start_s": 25596.519, "end_s": 25606.72, "action": "Zoomed and orbited around the scene with repeated middle-button navigation, bringing the kitchen model closer and then changing the view around the selected rectangle.", "intent": "Inspect the model and the separate rectangular object from different viewpoints.", "app": "SketchUp 2024", "details": "The kitchen interior became clearly visible while the rectangle remained outlined in blue."}, {"start_s": 25606.72, "end_s": 25612.231, "action": "Clicked the rectangular face repeatedly and typed \u201cP,\u201d then used the active push/pull operation to extrude it into a box-like solid.", "intent": "Convert the flat rectangle into a three-dimensional block.", "app": "SketchUp 2024", "details": "The selected face rose from the ground plane, forming visible vertical sides."}, {"start_s": 25612.231, "end_s": 25628.713, "action": "Paused with the top face selected in the push/pull tool, then scrolled to adjust the view and distance while keeping the extruded block visible.", "intent": "Review or adjust the extrusion dimensions.", "app": "SketchUp 2024", "details": "The block remained selected and its displayed distance changed during the view adjustment."}, {"start_s": 25628.713, "end_s": 25638.631, "action": "Entered a numeric value ending with Enter, clicked to confirm the modeling operation, and orbited and zoomed out to compare the block with the kitchen model.", "intent": "Set the extrusion dimension and review the resulting placement.", "app": "SketchUp 2024", "details": "The final view showed the kitchen model on the left and a separate flat-topped rectangular block on the right."}, {"start_s": 25638.631, "end_s": 25644.009, "action": "Scrolled repeatedly to adjust the SketchUp view, enlarging the white rectangular slab while keeping the furnished room model partially visible.", "intent": "Adjust the 3D viewport for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 25644.009, "end_s": 25661.13, "action": "Scrolled briefly and repositioned the view, leaving the furnished room at left and the white rectangular slab centered in the SketchUp viewport.", "intent": "Inspect and frame the model components.", "app": "SketchUp 2024", "details": null}, {"start_s": 25661.13, "end_s": 25674.169, "action": "Scrolled once and then entered the letter \u201cR\u201d while the SketchUp viewport remained focused on the slab and room model.", "intent": "Continue viewport work; the purpose of the single keystroke is unclear.", "app": "SketchUp 2024", "details": null}, {"start_s": 25674.169, "end_s": 25684.207, "action": "Clicked and navigated on the slab, activating a drawing tool and beginning a narrow rectangular section along its left edge; the rectangle remained in progress with dimensions shown.", "intent": "Draw a rectangular division or feature on the slab.", "app": "SketchUp 2024", "details": "The status bar indicated setting the opposite corner."}, {"start_s": 25684.207, "end_s": 25694.025, "action": "Continued drawing and adjusting the slab geometry, creating narrow divisions at the left and right edges; orbited or zoomed the view and left the drawing operation active.", "intent": "Add and refine rectangular slab sections.", "app": "SketchUp 2024", "details": "The Dimensions field showed changing measurements during the operation."}, {"start_s": 25694.025, "end_s": 25703.839, "action": "Selected the slab area, opened its context menu, and moved through menu options including Zone Selection; after the menu closed, the right narrow face was highlighted with a stippled selection.", "intent": "Select and inspect a slab face or zone for a modeling operation.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, and plugin commands."}, {"start_s": 25703.839, "end_s": 25713.967, "action": "Opened and dismissed a context menu on the SketchUp model, then clicked to select the left edge face of the rectangular floor slab.", "intent": "Select and prepare a model face for editing.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Hide, Make Component, Make Group, and Push/Pull-related commands."}, {"start_s": 25713.967, "end_s": 25730.152, "action": "Clicked the slab and repeatedly scrolled, changing the camera view while keeping the left portion of the slab selected.", "intent": "Adjust the view and inspect the selected slab geometry.", "app": "SketchUp 2024", "details": "The kitchen model and rectangular slab remained visible; scrolling changed the perspective/zoom."}, {"start_s": 25730.152, "end_s": 25740.185, "action": "Activated Push/Pull, clicked the selected slab face, and dragged it upward to form a tall rectangular wall or partition.", "intent": "Extrude the selected face to create vertical geometry.", "app": "SketchUp 2024", "details": "The resulting upright extrusion was visible beside the floor slab."}, {"start_s": 25740.185, "end_s": 25750.151, "action": "Continued using Push/Pull on another slab section, raised a second vertical wall, and orbited the camera around the new geometry.", "intent": "Create another wall and inspect the developing structure.", "app": "SketchUp 2024", "details": "Two upright wall-like extrusions were visible on the rectangular base."}, {"start_s": 25750.151, "end_s": 25760.121, "action": "Orbited and zoomed the SketchUp camera away from the wall geometry toward the kitchen model, bringing the kitchen and adjacent white wall forms into view.", "intent": "Review the overall model from different viewpoints.", "app": "SketchUp 2024", "details": "The camera moved from a distant overview to a closer view of the kitchen scene."}, {"start_s": 25760.121, "end_s": 25770.135, "action": "Continued orbiting and zooming into the kitchen, ending on a close inspection of the cabinets, sink, stove, refrigerator, and dining table.", "intent": "Inspect the completed kitchen area in detail.", "app": "SketchUp 2024", "details": "The final view focused on the furnished kitchen and dining area."}, {"start_s": 25770.135, "end_s": 25781.449, "action": "Orbited and zoomed the SketchUp view around the furnished kitchen model, changing from a closer room view to a wider view that included the adjacent wall structure.", "intent": "Inspect the 3D kitchen layout from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 25781.449, "end_s": 25785.871, "action": "Zoomed and orbited farther out, revealing the furnished kitchen as a small separate model beside a simple U-shaped wall-and-floor structure.", "intent": "Review the spatial relationship between the kitchen model and surrounding structure.", "app": "SketchUp", "details": null}, {"start_s": 25785.871, "end_s": 25805.871, "action": "Remained idle on the SketchUp scene showing the furnished kitchen model at left and the unfurnished U-shaped structure at right.", "intent": "Pause while reviewing the current 3D scene.", "app": "SketchUp", "details": null}, {"start_s": 25805.871, "end_s": 25821.309, "action": "Zoomed toward the left wall of the U-shaped structure and repeatedly clicked it, leaving the wall selected with a bounding box; then moved to the Profiles toolbar control, displaying the tooltip \u201cConvert selected edges to profiles.\u201d", "intent": "Select the wall geometry and inspect the edge-profile conversion tool.", "app": "SketchUp", "details": "The selected wall remained highlighted, and the toolbar tooltip identified the profile-conversion command."}, {"start_s": 25821.309, "end_s": 25831.234, "action": "Opened the \u201c1001bit.com profiles on plane\u201d dialog, returned to the main SketchUp window, zoomed in on the selected wall, and began interacting near its upper edge.", "intent": "Configure or apply profile settings to the selected wall geometry.", "app": "SketchUp", "details": "The Profiles dialog showed profile width 50.00 mm, depth 100.00 mm, and the preset \u201cASTM steel pipe 1/8in.\u201d"}, {"start_s": 25831.234, "end_s": 25841.688, "action": "Orbited and zoomed around the U-shaped wall structure, moving from a close interior view to a wider perspective that again showed the furnished kitchen model at left.", "intent": "Inspect the selected structure and resulting scene from multiple angles.", "app": "SketchUp", "details": null}, {"start_s": 25841.688, "end_s": 25850.807, "action": "Scrolled repeatedly and adjusted the Windows Explorer window, then middle-clicked in the SketchUp viewport to change the camera view from a close-up wall corner to a wider view of the room model.", "intent": "Adjust the 3D view for inspection.", "app": "SketchUp 2024", "details": "The model remained visible in SketchUp; the selected wall edge was shown in blue before the view widened."}, {"start_s": 25850.807, "end_s": 25870.807, "action": "Scrolled repeatedly to zoom into the SketchUp model, moving from a wider room view to a close-up of the wall and floor junction; then paused with no further interaction.", "intent": "Inspect the wall and floor geometry closely.", "app": "SketchUp 2024", "details": "System configuration and network status changes occurred during the otherwise inactive remainder of the span."}, {"start_s": 25870.807, "end_s": 25877.198, "action": "Pressed a key and clicked near the lower edge of the model, leaving the close-up SketchUp view unchanged.", "intent": "Interact with or inspect the visible model geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 25877.198, "end_s": 25889.578, "action": "Switched to the recorder application context, then scrolled repeatedly in the SketchUp viewport to pan or zoom across the wall and floor corner.", "intent": "Continue navigating the 3D model view.", "app": "SketchUp 2024", "details": "The visible SketchUp scene remained focused on the room corner; no modeled geometry change was evident."}, {"start_s": 25889.578, "end_s": 25901.739, "action": "Middle-clicked and scrolled to orbit and zoom the SketchUp camera, changing from a close-up corner to a wider view of the room structure and nearby furnished area.", "intent": "Reframe the model for broader inspection.", "app": "SketchUp 2024", "details": "The final view showed the U-shaped wall structure and a smaller furnished model to its left."}, {"start_s": 25901.739, "end_s": 25909.56, "action": "Middle-clicked several times and scrolled to continue orbiting and reframing the SketchUp scene, ending with a wider angled view of the U-shaped structure and adjacent furnished model.", "intent": "Adjust the camera to inspect the overall model arrangement.", "app": "SketchUp 2024", "details": "The orbit tool cursor was visible near the end of the span."}, {"start_s": 25909.56, "end_s": 25929.56, "action": "Remained idle in SketchUp while viewing the kitchen model and adjacent wall structure.", "intent": "Review the current 3D model.", "app": "SketchUp", "details": null}, {"start_s": 25929.56, "end_s": 25949.56, "action": "Remained idle in SketchUp as toolbar tooltips appeared while the kitchen model and wall structure stayed unchanged.", "intent": "Review available modeling tools and the current model.", "app": "SketchUp", "details": "Tooltips referenced wall openings and stair creation."}, {"start_s": 25949.56, "end_s": 25961.13, "action": "Hovered over SketchUp tools and issued a brief scroll input; left the model geometry unchanged.", "intent": "Inspect modeling tools without modifying the model.", "app": "SketchUp", "details": "The status bar showed a door-frame-related tool before the scroll."}, {"start_s": 25961.13, "end_s": 25981.13, "action": "Remained idle in SketchUp while inspecting tooltips for profile and extrusion tools; made no visible model changes.", "intent": "Review available geometry tools.", "app": "SketchUp", "details": "Tooltips referenced rafters/joists and extruding a profile along a path."}, {"start_s": 25981.13, "end_s": 25985.61, "action": "Scrolled through the toolbar area and clicked a modeling tool twice, leaving the visible model unchanged.", "intent": "Select or inspect a different SketchUp modeling tool.", "app": "SketchUp", "details": "The selected tool was identified as Table in the status bar."}, {"start_s": 25985.61, "end_s": 25994.232, "action": "Switched back to the SketchUp window, navigated the 3D view with scroll and middle-click inputs, and clicked the model repeatedly; SketchUp displayed an error stating that edges must be selected before running the tool.", "intent": "Attempt to run a modeling tool on selected geometry and adjust the view.", "app": "SketchUp", "details": "The resulting view was zoomed toward the wall structure; the error dialog indicated no edges were selected."}, {"start_s": 25994.232, "end_s": 26003.568, "action": "Clicked the profile-extrusion tool and selected a reference point on the face of the tall white profile.", "intent": "Prepare an extrusion from the selected profile face.", "app": "SketchUp 2024", "details": "The status bar prompted for a reference point on the profile face."}, {"start_s": 26003.568, "end_s": 26013.073, "action": "Clicked and orbited around the model, zooming and panning to inspect the white wall-like geometry from several angles.", "intent": "Review the model and position the camera for further editing.", "app": "SketchUp 2024", "details": "The view changed from a close perspective to a distant angled view showing the wall assembly and a separate furnished room model."}, {"start_s": 26013.073, "end_s": 26022.595, "action": "Undid recent actions, continued orbiting and zooming, and selected or inspected geometry until the model was shown from a wider view.", "intent": "Adjust the model state and inspect the overall arrangement.", "app": "SketchUp 2024", "details": "The final view showed the furnished room and the U-shaped white structure separated in the workspace."}, {"start_s": 26022.595, "end_s": 26033.04, "action": "Zoomed and panned slightly, then typed R to activate the Rectangle tool.", "intent": "Begin drawing a rectangular element in the model.", "app": "SketchUp 2024", "details": "The Rectangle tool became active and the status bar prompted for the first corner."}, {"start_s": 26033.04, "end_s": 26043.515, "action": "Scrolled to adjust the view, clicked near the ground plane, and continued sizing a rectangle with the drawing tool.", "intent": "Create a rectangular face or footprint near the wall structure.", "app": "SketchUp 2024", "details": "A small rectangle preview appeared below the structure, with dimensions shown in the Measurements box."}, {"start_s": 26043.515, "end_s": 26052.672, "action": "Scrolled and zoomed toward the U-shaped structure, then clicked to define or adjust the rectangle while the Rectangle tool remained active.", "intent": "Position and size the rectangular element relative to the structure.", "app": "SketchUp 2024", "details": "The final close view showed a blue-outlined rectangle on the ground plane in front of the white structure."}, {"start_s": 26052.672, "end_s": 26062.762, "action": "Clicked and scrolled in the SketchUp model, then pressed Escape and Undo; the view zoomed out to show the small room model and a separate rectangular face.", "intent": "Adjust the model view and revert an uncertain operation.", "app": "SketchUp 2024", "details": null}, {"start_s": 26062.762, "end_s": 26072.728, "action": "Pressed R, adjusted the view, clicked the separate rectangular face, and repeatedly clicked it until it became selected with a dotted fill and blue outline.", "intent": "Select the separate rectangular face for editing.", "app": "SketchUp 2024", "details": "The Measurements box showed approximately 761.79 mm by 3161.08 mm."}, {"start_s": 26072.728, "end_s": 26078.818, "action": "Continued clicking the selected rectangular face, opened its context menu, then dismissed it while changing the camera view around the model.", "intent": "Inspect the selected face and available editing commands.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, JointPushPull, and other modeling commands."}, {"start_s": 26078.818, "end_s": 26091.122, "action": "Scrolled to adjust the camera while keeping the rectangular face selected and the room model in view.", "intent": "Reposition the view for continued model editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 26091.122, "end_s": 26100.968, "action": "Orbited and scrolled around the selected rectangular face, clicked it, and dragged briefly; the camera moved closer to the room model while the face remained outlined.", "intent": "Inspect the face and its placement relative to the room model.", "app": "SketchUp 2024", "details": null}, {"start_s": 26100.968, "end_s": 26109.378, "action": "Clicked the rectangular face repeatedly, orbited and scrolled the view, and left the face selected with the Orbit tool active.", "intent": "Continue inspecting the selected face from different angles.", "app": "SketchUp 2024", "details": "The final view was zoomed in on the selected face near the room structure."}, {"start_s": 26109.378, "end_s": 26120.512, "action": "Adjusted the selected curved edge with the Bulge tool, clicking and scrolling to increase the bulge and leaving a rounded side profile.", "intent": "Shape the edge of the selected SketchUp face.", "app": "SketchUp 2024", "details": "The Bulge field changed from approximately 628.73 mm to 389.80 mm."}, {"start_s": 26120.512, "end_s": 26130.752, "action": "Selected a point on the upper-right edge and dragged or set the endpoint to create a second curved bulge, then clicked to continue the operation.", "intent": "Add a curved contour to the model.", "app": "SketchUp 2024", "details": "The selected face remained stippled while the curved edge preview and Bulge measurement were shown."}, {"start_s": 26130.752, "end_s": 26141.712, "action": "Navigated around the model with middle-button orbiting and scrolling, then applied the Bulge tool to the long face and created a rounded end feature.", "intent": "Inspect and reshape the model from different views.", "app": "SketchUp 2024", "details": "The view changed to an oblique angle, and the previously selected face became mostly unselected as the rounded geometry appeared."}, {"start_s": 26141.712, "end_s": 26151.744, "action": "Orbited and zoomed out to inspect the full model, then clicked along the left side and adjusted another bulge while viewing the object nearly front-on.", "intent": "Review the reshaped geometry and refine another edge.", "app": "SketchUp 2024", "details": "The model showed a long rectangular body with rounded ends and side cutouts; the Bulge value reached approximately 1002.09 mm."}, {"start_s": 26151.744, "end_s": 26162.328, "action": "Orbited and zoomed to an angled view, clicked the model, and adjusted additional edges with the Bulge tool to form rounded side features.", "intent": "Continue refining the model's curved outline.", "app": "SketchUp 2024", "details": "The model displayed rounded end geometry and multiple side contours within its dotted selection bounds."}, {"start_s": 26162.328, "end_s": 26174.058, "action": "Clicked and orbited around the model, adjusted the lower-left and side edges with the Bulge tool, then scrolled to change the view and inspect the resulting contours.", "intent": "Finalize and inspect curved edge adjustments.", "app": "SketchUp 2024", "details": "The final view showed a more upright model with rounded top and bottom features and side cutouts; the Bulge value was approximately 879.05 mm."}, {"start_s": 26174.058, "end_s": 26183.817, "action": "Clicked and scrolled around the selected hourglass-shaped SketchUp object, then changed the view and left the object selected in a closer, upright view.", "intent": "Inspect and adjust the view of the modeled object.", "app": "SketchUp 2024", "details": "The white hourglass-like object remained selected with a bounding box."}, {"start_s": 26183.817, "end_s": 26193.706, "action": "Clicked repeatedly on the selected object and used clipboard keyboard commands while adjusting the view; the visible geometry changed from a patterned side region to a cleaner symmetric hourglass outline.", "intent": "Edit or refine the selected model geometry.", "app": "SketchUp 2024", "details": "The object stayed within a dotted selection boundary."}, {"start_s": 26193.706, "end_s": 26204.067, "action": "Clicked the model, scrolled to zoom out and back in, and selected an edge or face on the upper portion of the hourglass-shaped object.", "intent": "Inspect specific geometry at different zoom levels.", "app": "SketchUp 2024", "details": "The view alternated between a distant full-object view and a close-up with a blue-highlighted edge."}, {"start_s": 26204.067, "end_s": 26214.082, "action": "Clicked and zoomed around the object, then orbited or repositioned the camera until the hourglass form was shown smaller in the broader scene.", "intent": "Review the object in relation to the surrounding SketchUp scene.", "app": "SketchUp 2024", "details": "The final view showed the modeled object below larger surrounding structures."}, {"start_s": 26214.082, "end_s": 26223.275, "action": "Orbited the SketchUp scene and clicked the hourglass-shaped object, leaving it selected while the camera moved to a wider perspective.", "intent": "Position and select the modeled object for further editing.", "app": "SketchUp 2024", "details": "The wider view included a small furnished room, a larger white structure, and the selected hourglass object."}, {"start_s": 26223.275, "end_s": 26230.129, "action": "Activated the Rotate tool, clicked the selected group to set its rotation center, and adjusted the rotation handle around the object.", "intent": "Rotate the selected model group.", "app": "SketchUp 2024", "details": "A rotation protractor and red/blue rotation guides appeared; the angle field showed 136.4."}, {"start_s": 26230.129, "end_s": 26239.929, "action": "Orbited the SketchUp view around the kitchen model and adjacent wall structure, changing the camera angle.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 26239.929, "end_s": 26252.579, "action": "Continued orbiting the SketchUp scene, entered 90, and confirmed the angle, rotating the view to a side orientation.", "intent": "Set a precise viewing angle for model inspection.", "app": "SketchUp", "details": "The Angle field shows 90 at the end."}, {"start_s": 26252.579, "end_s": 26262.275, "action": "Exited the active view operation, adjusted the camera with clicks and scroll input, then selected and began moving the hourglass-shaped object away from the model.", "intent": "Reposition the selected object in the scene.", "app": "SketchUp", "details": "The hourglass-shaped object is selected and the Move tool shows a distance readout."}, {"start_s": 26262.275, "end_s": 26270.729, "action": "Zoomed and adjusted the view while continuing to move the selected hourglass-shaped object upward beside the wall structure.", "intent": "Place the selected object relative to the wall model.", "app": "SketchUp", "details": "The selected object remains attached to the move operation beside the wall."}, {"start_s": 26270.729, "end_s": 26288.679, "action": "Adjusted the camera and selected the hourglass-shaped object, moving it into a more prominent position in front of the wall structure; then hovered over the Extrude face along path tool.", "intent": "Refine the object placement and prepare a modeling operation.", "app": "SketchUp", "details": "The toolbar tooltip identifies Extrude face along path."}, {"start_s": 26288.679, "end_s": 26297.49, "action": "Returned focus to the SketchUp model, selected the left wall component, and changed the selection state while keeping the hourglass-shaped object visible in front.", "intent": "Select model geometry for further editing.", "app": "SketchUp", "details": "The left wall component is highlighted with a selection bounding box at the end."}, {"start_s": 26297.49, "end_s": 26308.049, "action": "Clicked repeatedly on the selected vertical rectangular face and nearby edges, changing the highlighted selection within the SketchUp model.", "intent": "Refine the selected geometry for subsequent modeling.", "app": "SketchUp", "details": "The vertical face remained outlined in blue while selection focus shifted."}, {"start_s": 26308.049, "end_s": 26318.209, "action": "Selected points and edges on the vertical face, then activated a profile-extrusion operation and positioned the cursor to pick a start point.", "intent": "Prepare to extrude the selected profile along a path.", "app": "SketchUp", "details": "The status bar showed \u201cPick profile of extrusion (face)\u201d and later \u201cPick start point (end vertex of selected edge).\u201d"}, {"start_s": 26318.209, "end_s": 26328.209, "action": "Selected path points around the model, switched the view with middle-button navigation and scrolling, and pressed Enter while continuing the extrusion setup.", "intent": "Define or confirm the extrusion path for the selected profile.", "app": "SketchUp", "details": "The view rotated to show the large central wall and adjacent room geometry; the tool still requested a start point."}, {"start_s": 26328.209, "end_s": 26338.068, "action": "Clicked the model to select and inspect the profile, navigated by scrolling and middle-button movement, and adjusted the camera to a wider view.", "intent": "Position the model and profile for the next modeling operation.", "app": "SketchUp", "details": "The selected narrow vertical face remained outlined in blue as the camera zoomed out."}, {"start_s": 26338.068, "end_s": 26354.961, "action": "Navigated around the model with scrolling and middle-button orbiting, clicked the profile and surrounding geometry several times, and activated the profile extrusion tool.", "intent": "Select the profile and begin extruding it along the chosen path.", "app": "SketchUp", "details": "The profile became selected with a blue bounding outline; the status bar later read \u201cExtrude selected profile along selected path.\u201d"}, {"start_s": 26354.961, "end_s": 26365.251, "action": "Returned focus to SketchUp, clicked the profile and reference areas, and navigated the view; a \u201cMaintain vertical section profile?\u201d dialog appeared and remained open before the tool requested a reference point.", "intent": "Continue the profile extrusion while deciding whether to preserve its vertical orientation.", "app": "SketchUp", "details": "The dialog offered Yes and No; the later status bar read \u201cPick a reference point on the profile face.\u201d"}, {"start_s": 26365.251, "end_s": 26375.227, "action": "Selected points and edges around the base of the 3D wall assembly, then navigated the close-up view with middle-button clicks and scrolling.", "intent": "Inspect or modify geometry at the wall base.", "app": "SketchUp 2024", "details": "The status bar showed the Pick start point prompt, and the view remained tightly focused on the wall corner."}, {"start_s": 26375.227, "end_s": 26385.185, "action": "Repeatedly clicked near the lower wall corner while keeping the point-selection tool active, scrolled the view, and then clicked the upper wall face to continue selecting geometry.", "intent": "Continue selecting reference points or edges on the wall assembly.", "app": "SketchUp 2024", "details": "The model view shifted from the lower corner to a higher view of the white wall surface."}, {"start_s": 26385.185, "end_s": 26394.842, "action": "Clicked and briefly dragged on the wall, pressed Escape twice, navigated with scrolling and middle-button clicks, and selected wall faces as the camera zoomed out.", "intent": "Cancel an uncertain selection and inspect the surrounding model.", "app": "SketchUp 2024", "details": "The view expanded to show the larger white three-sided structure and a separate furnished room model."}, {"start_s": 26394.842, "end_s": 26404.754, "action": "Selected the narrow wall face, made additional clicks and a short drag, scrolled, and orbited the camera to a more distant angled view.", "intent": "Inspect the selected wall component from different viewpoints.", "app": "SketchUp 2024", "details": "The selected face remained highlighted while the model and furnished room were visible together."}, {"start_s": 26404.754, "end_s": 26414.77, "action": "Scrolled and clicked repeatedly around the selected wall component, used middle-button navigation, and continued selecting points or edges while zooming farther out.", "intent": "Refine or inspect geometry on the wall component.", "app": "SketchUp 2024", "details": "The status bar again indicated Pick start point, and the selected narrow face stayed highlighted in the wider model view."}, {"start_s": 26414.77, "end_s": 26425.385, "action": "Repeatedly clicked the narrow wall face, then dragged around the lower-left area and navigated the view until the selection cleared.", "intent": "Complete the geometry inspection or selection operation.", "app": "SketchUp 2024", "details": "The final view showed the furnished room and the white wall assembly together without a visible face highlight."}, {"start_s": 26425.385, "end_s": 26443.553, "action": "Clicked repeatedly on the selected hourglass-shaped profile and nearby wall geometry, changing the active selection to include the adjacent wall and path-like edges.", "intent": "Select connected geometry for a SketchUp modeling operation.", "app": "SketchUp", "details": "The kitchen model and white wall assembly remained visible; blue selection outlines expanded around the profile and wall geometry."}, {"start_s": 26443.553, "end_s": 26455.49, "action": "Clicked additional wall and profile geometry, then used middle-mouse navigation to adjust the view and clicked the toolbar tool for extruding a selected profile along a selected path.", "intent": "Prepare and activate a profile-along-path extrusion tool.", "app": "SketchUp", "details": "The toolbar tooltip identified the command as \u201cExtrude selected profile along selected path\u201d; the selected geometry remained outlined."}, {"start_s": 26455.49, "end_s": 26465.29, "action": "Activated SketchUp, clicked the model geometry, and responded to the \u201cMaintain vertical section profile?\u201d prompt before clicking another face to continue the extrusion workflow.", "intent": "Configure the extrusion and pick the profile for the modeling operation.", "app": "SketchUp", "details": "The prompt was dismissed and the status bar changed to \u201cPick profile of extrusion (face).\u201d"}, {"start_s": 26465.29, "end_s": 26476.354, "action": "Clicked the hourglass-shaped profile and adjacent wall edges to select the extrusion profile and then continued picking a start point on the selected edge.", "intent": "Define the extrusion profile and path start point.", "app": "SketchUp", "details": "The status bar indicated \u201cPick start point (end vertex of selected edge).\u201d"}, {"start_s": 26476.354, "end_s": 26485.545, "action": "Clicked and dragged across the wall and profile geometry while refining the path selection, pressed Escape twice, navigated the view with scroll input, and clicked the model again.", "intent": "Refine or cancel the current path selection during the extrusion setup.", "app": "SketchUp", "details": "The view zoomed out by the end of the span, showing the kitchen model and the separate white wall assembly; no completed extrusion was clearly visible."}, {"start_s": 26485.545, "end_s": 26496.147, "action": "Scrolled to zoom or reposition the SketchUp view, leaving the kitchen model and white wall assembly smaller in the workspace.", "intent": "Adjust the modeling view for inspection.", "app": "SketchUp", "details": "No object edits were evident during this interval."}, {"start_s": 26496.147, "end_s": 26506.489, "action": "Clicked and scrolled within the SketchUp scene, then began dragging near the right-side model.", "intent": "Navigate or adjust the 3D view and select model elements.", "app": "SketchUp 2024", "details": "The scene showed a small room model and a separate white structure."}, {"start_s": 26506.489, "end_s": 26516.467, "action": "Dragged and repeatedly clicked model elements, selecting the tall right-side component and then the adjacent structure.", "intent": "Select and inspect components in the 3D model.", "app": "SketchUp 2024", "details": "Selection outlines appeared around the right-side geometry."}, {"start_s": 26516.467, "end_s": 26536.467, "action": "Clicked selected geometry and scrolled; the outlined structure disappeared from view, leaving the small room model visible.", "intent": "Modify or hide the selected geometry and review the resulting scene.", "app": "SketchUp 2024", "details": "The final evidence showed only the small room model near the origin."}, {"start_s": 26536.467, "end_s": 26556.467, "action": "Paused with the SketchUp scene visible and hovered over the array tool, displaying its tooltip.", "intent": "Review available modeling tools without making a recorded change.", "app": "SketchUp 2024", "details": "The tooltip described creating an array of groups or components along a selected path."}, {"start_s": 26556.467, "end_s": 26567.961, "action": "Clicked the camera-position tool twice.", "intent": "Activate the camera-position function for setting or inspecting a viewpoint.", "app": "SketchUp 2024", "details": "The status bar changed to \u201cSelect the camera position.\u201d"}, {"start_s": 26567.961, "end_s": 26583.067, "action": "Clicked in the scene to adjust the camera, then entered 2; the view moved closer to the room interior.", "intent": "Set the camera viewpoint and height for a closer model view.", "app": "SketchUp 2024", "details": "The final view showed the furnished room from the front, with Eye Height set to 2."}, {"start_s": 26583.067, "end_s": 26595.313, "action": "Entered 000 and then MM, confirming each entry; clicked a camera-navigation control, which zoomed the model far out to a small kitchen view.", "intent": "Adjust the SketchUp camera view and navigation settings.", "app": "SketchUp", "details": "The model changed from a close room view to a distant view centered near the axes."}, {"start_s": 26595.313, "end_s": 26610.515, "action": "Clicked camera-navigation controls and clicked in the modeling area, changing the view around the small kitchen model; entered 1 near the end of the span.", "intent": "Continue positioning the camera around the model.", "app": "SketchUp", "details": "The eye-height readout changed while the kitchen remained visible at a distance."}, {"start_s": 26610.515, "end_s": 26622.782, "action": "Entered 0000 and confirmed it, scrolled to adjust the camera, then entered 2000; the view moved upward and farther from the kitchen model.", "intent": "Set camera navigation values and reposition the viewpoint.", "app": "SketchUp", "details": "The model became partially or fully distant near the lower edge of the viewport."}, {"start_s": 26622.782, "end_s": 26633.664, "action": "Confirmed the camera value, scrolled and used middle-button camera navigation to reposition the view, then clicked a toolbar control that switched to zoom-window mode.", "intent": "Navigate back toward the kitchen and prepare a closer zoom.", "app": "SketchUp", "details": "The kitchen enlarged from a distant view to a recognizable room, then the viewport showed a close-up kitchen view with zoom-window mode active."}, {"start_s": 26633.664, "end_s": 26645.995, "action": "Scrolled repeatedly while zooming and reviewing the kitchen interior, moving from the sink and cabinets toward the dining table and wider room view.", "intent": "Inspect the modeled kitchen and dining area from different zoom levels.", "app": "SketchUp", "details": "The view showed the sink, dish rack, cookware, cabinets, refrigerator, and fully set dining table."}, {"start_s": 26645.995, "end_s": 26654.834, "action": "Clicked to activate the zoom tool, dragged a window over the dining-area view, and scrolled to refine the framing.", "intent": "Frame a closer view of the kitchen dining area.", "app": "SketchUp", "details": "The final view centered more tightly on the set dining table, chairs, cabinetry, sink, stove, and refrigerator."}, {"start_s": 26654.834, "end_s": 26663.688, "action": "Adjusted the SketchUp view with middle-button navigation and scrolling, then clicked the navigation control to enter walk mode.", "intent": "Navigate and inspect the kitchen model.", "app": "SketchUp 2024", "details": "The kitchen and dining area remained visible while the navigation mode changed."}, {"start_s": 26663.688, "end_s": 26674.785, "action": "Clicked repeatedly in the floor area to walk through the model, then used middle-button navigation to reposition the view.", "intent": "Move the viewpoint through the kitchen scene.", "app": "SketchUp 2024", "details": "The camera moved from a wide kitchen view toward the room edge."}, {"start_s": 26674.785, "end_s": 26682.529, "action": "Used middle-button navigation to orbit and reposition around the kitchen, ending on a wider view of the cabinets, appliances, and dining table.", "intent": "Inspect the modeled kitchen from different angles.", "app": "SketchUp 2024", "details": "The visible camera angle changed substantially without editing model geometry."}, {"start_s": 26682.529, "end_s": 26693.033, "action": "Clicked to continue navigation and dragged across the floor area, repositioning the walking viewpoint near the kitchen interior.", "intent": "Navigate within the 3D kitchen model.", "app": "SketchUp 2024", "details": "The view stayed in walk/navigation mode and remained focused on the kitchen."}, {"start_s": 26693.033, "end_s": 26713.033, "action": "Continuously dragged to walk through the scene, moving the camera from the room-wide view toward a close-up of the upper cabinets, sink, oven, and refrigerator.", "intent": "Explore the kitchen layout in close detail.", "app": "SketchUp 2024", "details": "No geometry or materials were edited; the camera advanced through the model."}, {"start_s": 26713.033, "end_s": 26723.745, "action": "Dragged in walk mode around the upper cabinets and refrigerator, then clicked and scrolled, ending with the camera near the doorway and wall.", "intent": "Continue navigating and inspecting the kitchen model.", "app": "SketchUp 2024", "details": "The final view shifted away from the cabinets toward the doorway and surrounding wall."}, {"start_s": 26723.745, "end_s": 26733.785, "action": "Scrolled and middle-clicked repeatedly to orbit and adjust the SketchUp camera around the small kitchen/dining model, ending on a closer view of the furnished dining area.", "intent": "Inspect the 3D model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 26733.785, "end_s": 26743.41, "action": "Scrolled and middle-clicked to zoom and orbit around the kitchen/dining model, progressively changing between distant and angled views.", "intent": "Continue reviewing the model from multiple viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 26743.41, "end_s": 26753.446, "action": "Clicked and scrolled to move from the overall view into a close-up of the dining table, then selected the fruit bowl and its contents.", "intent": "Inspect and select the dining-table centerpiece.", "app": "SketchUp 2024", "details": "The selected fruit bowl area was shown with a blue bounding box."}, {"start_s": 26753.446, "end_s": 26763.826, "action": "Clicked and scrolled to orbit and zoom back out from the selected centerpiece, showing the furnished dining table and surrounding kitchen from wider angles.", "intent": "Review the selected centerpiece in the context of the full room.", "app": "SketchUp 2024", "details": "The fruit bowl remained selected in the closer view."}, {"start_s": 26763.826, "end_s": 26773.032, "action": "Clicked and scrolled around the dining table, briefly keeping the fruit bowl selected, then zoomed out to show the complete kitchen and dining layout.", "intent": "Inspect the room arrangement and centerpiece placement.", "app": "SketchUp 2024", "details": "The final view showed the full room with cabinets, appliances, table, chairs, and table settings."}, {"start_s": 26773.032, "end_s": 26781.057, "action": "Scrolled continuously to orbit and zoom between closer and distant views of the kitchen and dining model.", "intent": "Continue visual review of the completed 3D scene.", "app": "SketchUp 2024", "details": "System configuration and network status changed briefly during the navigation."}, {"start_s": 26781.057, "end_s": 26792.174, "action": "Scrolled the SketchUp view and middle-clicked twice, leaving the small furnished room model visible from a slightly adjusted view.", "intent": "Adjust the 3D view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 26792.174, "end_s": 26811.473, "action": "Scrolled repeatedly to zoom the furnished room model in and then back out, changing its size in the viewport.", "intent": "Inspect the model at different zoom levels.", "app": "SketchUp 2024", "details": null}, {"start_s": 26811.473, "end_s": 26821.623, "action": "Typed R, clicked in the workspace, scrolled, and clicked again to create and manipulate a rectangular face; the rectangle became visible near the room model.", "intent": "Begin drawing a new rectangular element in the model.", "app": "SketchUp 2024", "details": "A rectangular face was created and shown selected near the room."}, {"start_s": 26821.623, "end_s": 26829.495, "action": "Clicked the rectangular face repeatedly, right-clicked it, clicked a toolbar control, and typed P; the face remained selected and was raised into a box-like form.", "intent": "Modify the newly created rectangular face into a 3D element.", "app": "SketchUp 2024", "details": "The Push/Pull-style operation visibly extruded the rectangle upward."}, {"start_s": 26829.495, "end_s": 26838.024, "action": "Middle-clicked twice to orbit the view around the selected box, changing the camera angle while keeping the furnished room in the background.", "intent": "Inspect the extruded box from another angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 26838.024, "end_s": 26858.024, "action": "Remained idle in SketchUp with the extruded box selected and the furnished room visible in the viewport.", "intent": "Pause while reviewing the current model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 26858.024, "end_s": 26871.714, "action": "Adjusted the SketchUp view and manipulated the selected rectangular top face with the extrusion tool, changing the displayed model orientation and geometry.", "intent": "Modify the selected rectangular component in the SketchUp model.", "app": "SketchUp", "details": "The top face remained selected and the extrusion distance field was visible."}, {"start_s": 26871.714, "end_s": 26890.431, "action": "Continued selecting and manipulating the rectangular component, then changed the view; the result showed a box-like form with a top face and visible side face.", "intent": "Refine the 3D component geometry and inspect it from another angle.", "app": "SketchUp", "details": "The component was selected during much of the operation; the extrusion tool status was visible near the end."}, {"start_s": 26890.431, "end_s": 26894.996, "action": "Clicked the model while no face was selected, which opened a SketchUp error dialog stating that a face must be selected before running the tool.", "intent": "Attempt to run the active modeling tool on a face.", "app": "SketchUp", "details": "An error dialog appeared with an OK button."}, {"start_s": 26894.996, "end_s": 26912.973, "action": "Dismissed the error dialog and clicked the rectangular model repeatedly, leaving the top face selected within its bounding box.", "intent": "Recover from the tool error and select the face for further editing.", "app": "SketchUp", "details": "The selected top face was stippled and the extrusion tool status was shown."}, {"start_s": 26912.973, "end_s": 26923.486, "action": "Reactivated SketchUp and clicked the front face with the extrusion tool, bringing up an extrusion distance of 448.01 mm; continued the operation so the box gained an additional horizontal division.", "intent": "Extrude the selected front face to add or adjust geometry.", "app": "SketchUp", "details": "The model visibly changed from one front section to two stacked sections."}, {"start_s": 26923.486, "end_s": 26932.688, "action": "Selected the top face again and adjusted the view around the edited box, then entered brief keyboard input while the model remained selected.", "intent": "Inspect the edited geometry and continue the active modeling operation.", "app": "SketchUp", "details": "The final view showed the rectangular box with a divided front face and selected top face."}, {"start_s": 26932.688, "end_s": 26952.286, "action": "Adjusted the SketchUp view around the selected rectangular block with middle-button navigation and scroll input, leaving the block and kitchen model visible.", "intent": "Inspect the block in the 3D model.", "app": "SketchUp", "details": null}, {"start_s": 26952.286, "end_s": 26962.135, "action": "Navigated and zoomed the SketchUp camera, then clicked the block and its top face, leaving the top face stipple-selected.", "intent": "Inspect or select geometry on the block.", "app": "SketchUp", "details": null}, {"start_s": 26962.135, "end_s": 26975.975, "action": "Zoomed and repositioned the camera to show the kitchen model and detached block together, then clicked near the block.", "intent": "Review the relative placement of the model components.", "app": "SketchUp", "details": null}, {"start_s": 26975.975, "end_s": 26986.872, "action": "Clicked around the detached block, dragged across the model, and selected the block as a group; a move-tool corner tooltip appeared afterward.", "intent": "Select and begin manipulating the block group.", "app": "SketchUp", "details": null}, {"start_s": 26986.872, "end_s": 26996.911, "action": "Clicked and dragged around the selected block, used brief navigation input, and clicked the Scene 1 tab to change the camera view to the kitchen model.", "intent": "Reposition or inspect the block, then switch to the saved scene view.", "app": "SketchUp", "details": null}, {"start_s": 26996.911, "end_s": 27008.122, "action": "Opened the Scene 1 context menu, hid SketchUp briefly, then returned and opened the menu again with Play Animation highlighted.", "intent": "Access scene animation controls.", "app": "SketchUp", "details": "The Scene 1 context menu shows Move Left, Move Right, Add, Update, Rename, Delete, Play Animation, and Scenes."}, {"start_s": 27008.122, "end_s": 27012.616, "action": "Brought SketchUp to the foreground, moved the Animation window, and scrolled while the kitchen animation advanced to a closer view of the kitchen and dining area.", "intent": "Review the animated kitchen scene from changing viewpoints.", "app": "SketchUp", "details": "Animation window remained visible with Pause and Stop controls."}, {"start_s": 27012.616, "end_s": 27032.616, "action": "Waited while the SketchUp animation continued through multiple camera views of the kitchen and dining area.", "intent": "Passively review the running animation.", "app": "SketchUp", "details": null}, {"start_s": 27032.616, "end_s": 27046.299, "action": "Waited as the animation continued, then clicked the Stop control to end it and returned focus to the KITCHEN2 SketchUp model.", "intent": "Stop the animation and return to the model.", "app": "SketchUp", "details": "The kitchen model remained visible after stopping."}, {"start_s": 27046.299, "end_s": 27054.067, "action": "Used middle-button navigation and scrolling to orbit and zoom the SketchUp camera around the kitchen model, ending on a distant view before switching to the recorder window.", "intent": "Adjust the 3D view of the kitchen model.", "app": "SketchUp", "details": "The model changed from a close kitchen view to a very distant view."}, {"start_s": 27054.067, "end_s": 27059.947, "action": "Continued middle-button orbiting and scrolling in SketchUp, changing the distant perspective of the kitchen model.", "intent": "Further inspect the model from different 3D viewpoints.", "app": "SketchUp", "details": "The kitchen model remained small in the viewport."}, {"start_s": 27059.947, "end_s": 27076.042, "action": "Paused with the distant kitchen model visible, then performed a final middle-button click and scroll near the end of the span.", "intent": "Continue navigating the 3D model view.", "app": "SketchUp", "details": "No major model edit was visible."}, {"start_s": 27076.042, "end_s": 27085.105, "action": "Selected the rectangle tool, adjusted the view with scroll input, entered a value beginning with \u201cR,\u201d and clicked to define another rectangle corner; the existing kitchen model remained visible.", "intent": "Create or adjust a rectangular base in the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 27085.105, "end_s": 27095.153, "action": "Scrolled and clicked to complete a large rectangle on the ground plane, leaving the new face selected with dimensions shown in the Measurements box.", "intent": "Draw a rectangular floor or platform surface.", "app": "SketchUp 2024", "details": "The selected rectangle displayed a size of approximately 4130.81 mm by 3179.60 mm."}, {"start_s": 27095.153, "end_s": 27105.74, "action": "Opened the context menu for the selected rectangle, clicked within the model, and entered \u201cP6\u201d followed by Enter; the rectangle remained selected in the workspace.", "intent": "Inspect or modify the selected rectangular face using SketchUp commands.", "app": "SketchUp 2024", "details": "The context menu included options such as Make Group, Push/Pull, and Divide Faces."}, {"start_s": 27105.74, "end_s": 27123.93, "action": "Pressed Space and clicked the model, then waited while the rectangular face appeared as a solid gray platform with white side faces; later clicks reactivated the SketchUp window.", "intent": "Finish the platform geometry and return focus to the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 27123.93, "end_s": 27139.999, "action": "Switched to the 1001bit.com Create Staircases dialog and repeatedly clicked the next-arrow control, advancing the preview from staircase type 1 to type 4.", "intent": "Browse available staircase templates before building one.", "app": "SketchUp 2024", "details": "The dialog showed a staircase preview, a Type of staircases field, left and right arrows, and Build staircases and Exit buttons."}, {"start_s": 27139.999, "end_s": 27149.785, "action": "Returned to the main SketchUp model, selected the staircase-related tool, and clicked across the platform to begin positioning or drawing staircase geometry; guide lines appeared on the platform.", "intent": "Place or begin constructing a staircase on the new platform.", "app": "SketchUp 2024", "details": "The staircase dialog was no longer visible; the platform remained in the model with blue guide geometry."}, {"start_s": 27149.785, "end_s": 27159.656, "action": "Orbited and zoomed the SketchUp model to inspect the dining-room enclosure and adjacent staircase from a wider angle.", "intent": "Inspect the relationship between the room and staircase components.", "app": "SketchUp 2024", "details": null}, {"start_s": 27159.656, "end_s": 27170.379, "action": "Selected the staircase assembly, leaving it highlighted with a bounding box, then adjusted the view around the selected geometry.", "intent": "Select and inspect the staircase group.", "app": "SketchUp 2024", "details": null}, {"start_s": 27170.379, "end_s": 27180.099, "action": "Orbited the camera repeatedly around the model, changing from an elevated front view to a side and underside view of the staircase and room.", "intent": "Review the staircase geometry from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 27180.099, "end_s": 27189.72, "action": "Repositioned the view toward the lower staircase, selected its geometry, and activated the Push/Pull tool on a stair face.", "intent": "Prepare to modify the staircase geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 27189.72, "end_s": 27201.32, "action": "Used Push/Pull on the lower stair or landing face, extending the selected face and changing the displayed distance as the geometry was adjusted.", "intent": "Modify the lower staircase or landing dimensions.", "app": "SketchUp 2024", "details": null}, {"start_s": 27201.32, "end_s": 27213.192, "action": "Orbited and zoomed to an underside view of the staircase, selected a lower stair face, and used Push/Pull to extend it while the distance readout changed.", "intent": "Continue reshaping the staircase from below.", "app": "SketchUp 2024", "details": null}, {"start_s": 27213.192, "end_s": 27223.208, "action": "Navigated around the SketchUp stair model by clicking and scrolling, zooming from a distant view to a close view of the lower staircase and selected face.", "intent": "Inspect the stair geometry and position the view for editing.", "app": "SketchUp 2024", "details": "The Push/Pull tool status was visible and the lower stair face remained selected."}, {"start_s": 27223.208, "end_s": 27232.553, "action": "Orbited and zoomed around the staircase, moving from a close-up to a distant view that showed the staircase and adjacent room model.", "intent": "Review the staircase model from different angles.", "app": "SketchUp 2024", "details": "The view ended with the stair assembly selected within a bounding box."}, {"start_s": 27232.553, "end_s": 27243.931, "action": "Continued orbiting and zooming the SketchUp scene, then clicked a toolbar control that changed the view to show the room and staircase from a wider angle.", "intent": "Adjust the scene view for broader model inspection.", "app": "SketchUp 2024", "details": "The staircase and room were visible as separate model components."}, {"start_s": 27243.931, "end_s": 27253.409, "action": "Opened the 1001bit.com Create Staircases dialog and clicked the next-type control several times, changing the displayed staircase type from 7 to 9.", "intent": "Browse available staircase configurations.", "app": "SketchUp 2024", "details": "The Create Staircases dialog showed the type field and a preview of the selected staircase style."}, {"start_s": 27253.409, "end_s": 27268.221, "action": "Clicked through staircase type controls repeatedly, cycling the preview through several configurations and ending on type 12, a spiral staircase.", "intent": "Compare staircase presets before selecting one.", "app": "SketchUp 2024", "details": "The dialog displayed a spiral staircase preview with type value 12."}, {"start_s": 27268.221, "end_s": 27279.455, "action": "Opened the spiral-staircase builder, reviewed its default parameters, then returned to the SketchUp model and clicked the scene to begin placement.", "intent": "Configure and place a spiral staircase in the model.", "app": "SketchUp 2024", "details": "The builder showed step width, step angle, riser height, number of risers, and rail options; SketchUp ended with a prompt to pick the center basepoint."}, {"start_s": 27279.455, "end_s": 27291.913, "action": "Waited for SketchUp to respond while displaying the kitchen and stair model; the view updated to show the spiral staircase more prominently.", "intent": "Monitor the SketchUp model while the application recovers or completes an operation.", "app": "SketchUp 2024", "details": "Window initially showed Not Responding; no direct modeling change was confirmed."}, {"start_s": 27291.913, "end_s": 27305.003, "action": "Scrolled to zoom out and typed a space while viewing the kitchen and stair assemblies.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 27305.003, "end_s": 27314.619, "action": "Clicked and scrolled through the 3D viewport, orbiting and zooming from an overview to a closer view of the spiral staircase and adjacent kitchen.", "intent": "Inspect the staircase geometry from different viewpoints.", "app": "SketchUp 2024", "details": "A single 'M' keypress was also entered near the end of the span."}, {"start_s": 27314.619, "end_s": 27323.729, "action": "Selected the spiral staircase assembly, adjusted the view, and used the Move tool with middle-button navigation; the view ended zoomed out with the model visible and the selection cleared.", "intent": "Select and potentially reposition the staircase assembly while inspecting the model.", "app": "SketchUp 2024", "details": "The staircase was visibly highlighted during part of the span, but no completed displacement was confirmed."}, {"start_s": 27323.729, "end_s": 27334.576, "action": "Scrolled and orbited around the model, moving from a close-up of the spiral staircase to a wider elevated overview of the kitchen and stairs.", "intent": "Review the staircase and kitchen model from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 27334.576, "end_s": 27345.784, "action": "Orbited and zoomed the SketchUp viewport, then clicked the model; the final view showed a close-up of the spiral staircase with its geometry highlighted in blue.", "intent": "Inspect and select the spiral staircase components.", "app": "SketchUp 2024", "details": "The final selection state indicates the staircase assembly or related geometry was selected."}, {"start_s": 27345.784, "end_s": 27358.293, "action": "Clicked and scrolled within the SketchUp model, orbiting the view around the spiral staircase and adjacent room. Left the model displayed from a slightly adjusted angle.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2024", "details": "The staircase and furnished room remained visible; system configuration changes occurred briefly."}, {"start_s": 27358.293, "end_s": 27368.206, "action": "Selected the staircase assembly, entered a move-related operation, and then adjusted the view by scrolling and middle-click navigation. The camera ended farther out with the selected group bounds visible before selection was cleared.", "intent": "Select and reposition or inspect the staircase assembly.", "app": "SketchUp 2024", "details": "A single 'M' keystroke was entered and the staircase was shown inside a selection box."}, {"start_s": 27368.206, "end_s": 27377.039, "action": "Orbited and zoomed the SketchUp camera repeatedly around the staircase, moving from a close view to a wider angled view that included the room and upper stair flight.", "intent": "Review the staircase model from multiple angles.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible; interactions were primarily middle-mouse orbiting and scrolling."}, {"start_s": 27377.039, "end_s": 27387.055, "action": "Selected the curved rail or spiral component on the right, then scrolled and adjusted the view to zoom out, leaving the model in a wider overview.", "intent": "Select and inspect the curved staircase component.", "app": "SketchUp 2024", "details": "The selected curved component was outlined in blue before the view was zoomed farther out."}, {"start_s": 27387.055, "end_s": 27398.893, "action": "Orbited and zoomed the camera around the model, progressively changing from a distant overhead view to a more level side view of the room and staircase.", "intent": "Review the overall model composition from different viewpoints.", "app": "SketchUp 2024", "details": "The SketchUp window was hidden briefly during the span, then the model view continued."}, {"start_s": 27398.893, "end_s": 27408.581, "action": "Continued orbiting and zooming out to a distant view, then typed 'R' and clicked the model, ending with a rectangle-drawing tool active and a small guide marker visible near the red axis.", "intent": "Adjust the model view and begin a drawing operation.", "app": "SketchUp 2024", "details": "The final screen showed the Rectangle tool status and an unfinished rectangle operation."}, {"start_s": 27408.581, "end_s": 27428.581, "action": "Clicked and scrolled in the SketchUp model view without a clearly visible change to the geometry.", "intent": "Navigate or inspect the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 27428.581, "end_s": 27438.293, "action": "Selected the rectangular ground face, then zoomed or orbited the model view while leaving the face selected.", "intent": "Inspect or prepare the rectangular face for editing.", "app": "SketchUp 2024", "details": "The rectangular face is highlighted in blue in the final view."}, {"start_s": 27438.293, "end_s": 27451.743, "action": "Zoomed in and out around the selected rectangular face and clicked it repeatedly, leaving the face selected within a visible bounding box.", "intent": "Inspect or select the rectangular face for a modeling operation.", "app": "SketchUp 2024", "details": "The model view changes scale substantially while the rectangular face remains the focus."}, {"start_s": 27451.743, "end_s": 27462.119, "action": "Activated a face-editing or push/pull operation on the rectangular face, entered a numeric distance ending with Enter, and left the resulting rectangular slab visible.", "intent": "Set the thickness or extrusion distance of the rectangular face.", "app": "SketchUp 2024", "details": "The face is shown with visible side thickness; the status bar shows a distance of 357.87 mm."}, {"start_s": 27462.119, "end_s": 27482.119, "action": "Clicked away from the rectangular slab and adjusted the view, leaving the slab beside the staircase and spiral stairs.", "intent": "Review the modeled slab in relation to the surrounding structure.", "app": "SketchUp 2024", "details": "The cursor hovered over the Automatic Cleaning toolbar control near the end of the span."}, {"start_s": 27482.119, "end_s": 27502.119, "action": "Remained idle in SketchUp with the staircase, spiral stairs, room, and rectangular slab visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 27502.119, "end_s": 27522.119, "action": "Remained idle in SketchUp with the kitchen, stairs, spiral staircase, and platform model visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp", "details": null}, {"start_s": 27522.119, "end_s": 27537.663, "action": "Resized and hid the Windows Explorer window, scrolled briefly, then clicked the SketchUp toolbar to reveal and activate the modeling view.", "intent": "Return focus to SketchUp and adjust the view or tool state.", "app": "SketchUp", "details": "The model view remained visible, and the toolbar status later indicated the standard escalator tool."}, {"start_s": 27537.663, "end_s": 27543.527, "action": "Switched to the Build Escalator plugin window, displayed its Create Escalator dialog, and then clicked back into the SketchUp model.", "intent": "Open the escalator generator and begin placing an escalator.", "app": "SketchUp", "details": "The dialog showed 1000 mm step width, 20 mm side-panel thickness, and a 3000 mm floor-to-floor height option."}, {"start_s": 27543.527, "end_s": 27550.234, "action": "Returned to SketchUp and clicked points on the separate platform to define the escalator placement, leaving the tool prompting for a point on the upper floor.", "intent": "Specify the escalator's floor locations.", "app": "SketchUp", "details": "A blue placement line appeared on the platform."}, {"start_s": 27550.234, "end_s": 27560.64, "action": "Confirmed the upper-floor point, dismissed the height warning, and generated an escalator; the view then showed a new modeled escalator beside the existing stairs and spiral staircase.", "intent": "Create the escalator using the picked points and configured height.", "app": "SketchUp", "details": "The warning stated that the picked-point height was under 1 m and the dialog-entered height would be used."}, {"start_s": 27560.64, "end_s": 27571.025, "action": "Navigated and zoomed out around the model, then selected the newly created escalator assembly so it became highlighted in blue.", "intent": "Inspect and select the generated escalator.", "app": "SketchUp", "details": "The final view showed the escalator connected to the kitchen area and selected as a grouped assembly."}, {"start_s": 27571.025, "end_s": 27586.191, "action": "Scrolled and clicked through SketchUp toolbar controls, ending over the standard escalator tool and exposing its tooltip.", "intent": "Locate or activate an escalator-building tool.", "app": "SketchUp 2024", "details": "The model view showed a kitchen, stairs, spiral staircase, and floor slabs."}, {"start_s": 27586.191, "end_s": 27594.118, "action": "Switched to the Build Escalator window, briefly returned to the model, then reopened the dialog and clicked the model to begin picking a lower-floor point.", "intent": "Configure and place an escalator in the SketchUp model.", "app": "SketchUp 2024", "details": "The Create Escalator dialog showed 1000 mm step width, 20 mm side-panel thickness, and 3000 mm floor height."}, {"start_s": 27594.118, "end_s": 27600.151, "action": "Clicked the model to pick floor points; after the second selection, acknowledged the warning that the picked height was under 1 m and that the entered dialog height would be used.", "intent": "Define the escalator placement and height.", "app": "SketchUp 2024", "details": "SketchUp remained in the point-picking workflow and then displayed a height warning."}, {"start_s": 27600.151, "end_s": 27618.655, "action": "Waited briefly, then scrolled repeatedly to zoom out and reveal the completed escalator alongside the existing stairs and spiral staircase.", "intent": "Review the generated escalator in the overall model.", "app": "SketchUp 2024", "details": "The view changed from a close model view to a wide view containing the kitchen, stairs, spiral staircase, floor slabs, and escalator."}, {"start_s": 27618.655, "end_s": 27629.598, "action": "Scrolled to adjust the camera around the wide model view and clicked near the escalator.", "intent": "Inspect or target the newly created escalator.", "app": "SketchUp 2024", "details": "The escalator remained visible at the right side of the model."}, {"start_s": 27629.598, "end_s": 27642.143, "action": "Scrolled and clicked the escalator, selecting the entire escalator assembly; then typed M to begin the Move operation.", "intent": "Prepare to reposition the escalator assembly.", "app": "SketchUp 2024", "details": "The escalator was highlighted in blue, and the status bar indicated moving pre-selected items."}, {"start_s": 27642.143, "end_s": 27651.661, "action": "Clicked and scrolled with the middle button to orbit and adjust the SketchUp camera, changing from a distant overview to a low side view of the escalator and surrounding stair models.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 27651.661, "end_s": 27658.892, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom around the model, moving from a close escalator view to a broader view showing the restaurant, spiral stairs, straight stairs, and escalator.", "intent": "Review the modeled structures from multiple angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 27658.892, "end_s": 27678.892, "action": "Remained idle while the SketchUp model stayed displayed in a broad overview.", "intent": "Pause while reviewing the 3D scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 27678.892, "end_s": 27688.556, "action": "Switched to the recorder window, then middle-clicked and scrolled to orbit and zoom the SketchUp scene, ending on a closer angled view of the escalator, stairs, spiral staircase, and room.", "intent": "Continue inspecting the model from another camera angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 27688.556, "end_s": 27695.396, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom out to a distant side view, then zoomed back toward the escalator and adjacent stairs.", "intent": "Examine the overall placement and geometry of the modeled stairs and escalator.", "app": "SketchUp 2024", "details": null}, {"start_s": 27695.396, "end_s": 27706.307, "action": "Paused briefly, then scrolled and middle-clicked to adjust the camera, shifting from a close escalator view to a wider side view that included the room, spiral stairs, straight stairs, and escalator.", "intent": "Review the complete model layout from a wider viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 27706.307, "end_s": 27717.025, "action": "Selected the Rectangle tool, entered a dimension value, and adjusted the view around the kitchen, stairs, and escalator models while beginning a small rectangular face.", "intent": "Create or size a small rectangular element near the existing architectural models.", "app": "SketchUp 2024", "details": "A small rectangle was visible near the escalator area and the Measurements box showed a dimension value."}, {"start_s": 27717.025, "end_s": 27726.299, "action": "Confirmed the small rectangle, opened its context menu, and continued selecting or manipulating the element near the escalator base.", "intent": "Modify the newly created rectangular element using SketchUp's object commands.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, and other modeling commands."}, {"start_s": 27726.299, "end_s": 27737.571, "action": "Selected the small element and used Push/Pull to extend it vertically, then zoomed or orbited out while keeping the extrusion active.", "intent": "Extrude the rectangular face into a vertical architectural element.", "app": "SketchUp 2024", "details": "The status bar showed Push/Pull and the distance field displayed changing values."}, {"start_s": 27737.571, "end_s": 27754.385, "action": "Paused with the extruded element selected and zoomed progressively farther out to review its placement relative to the surrounding models.", "intent": "Review the new element's position and scale in the overall scene.", "app": "SketchUp 2024", "details": "The scene became very distant, with the selected narrow vertical element remaining near the axes."}, {"start_s": 27754.385, "end_s": 27773.287, "action": "Zoomed and navigated around the scene, then selected the vertical element and activated the Rectangular Array tool.", "intent": "Prepare to duplicate the vertical element as an array.", "app": "SketchUp 2024", "details": "The selected element was shown beside the escalator, and the status bar indicated creation of a 2D linear array of groups/components."}, {"start_s": 27773.287, "end_s": 27791.773, "action": "Switched to the 1001bit.com Rectangular Array dialog, reviewed the default 1000 mm distances and 3-by-3 counts, returned to the model, and picked a column direction for the selected element.", "intent": "Configure and place a rectangular array of the vertical element.", "app": "SketchUp 2024", "details": "The dialog showed Column distance 1000.00 mm, Row distance 1000.00 mm, Number of columns 3, and Number of rows 3."}, {"start_s": 27791.773, "end_s": 27804.9, "action": "Switched between the Rectangular Array dialog and the SketchUp model, clicked in the model around the selected rectangular column, pressed Enter, and returned to the array dialog.", "intent": "Operate the rectangular-array tool and select or confirm model geometry.", "app": "SketchUp", "details": "The array dialog showed 1000 mm column and row distances with 3 columns and 3 rows."}, {"start_s": 27804.9, "end_s": 27819.417, "action": "Reviewed the Rectangular Array dialog and then clicked its lower-left control to close or exit it.", "intent": "Finish reviewing the array settings and leave the dialog.", "app": "SketchUp", "details": "The dialog remained visible with the default 3-by-3 array settings."}, {"start_s": 27819.417, "end_s": 27831.281, "action": "Returned to the SketchUp model, zoomed or navigated around the selected rectangular column, and clicked near its base to pick a reference point.", "intent": "Set the reference point for the array operation.", "app": "SketchUp", "details": "The status bar requested a reference point on a group or component."}, {"start_s": 27831.281, "end_s": 27848.597, "action": "Clicked repeatedly near the selected column, navigated and zoomed the view, and clicked with the middle mouse button to adjust the model view; then switched back to the Rectangular Array tool.", "intent": "Position the view and continue defining the array direction.", "app": "SketchUp", "details": "The status bar progressed to picking the column direction, and the array tool help was visible."}, {"start_s": 27848.597, "end_s": 27857.681, "action": "Switched back to the model, zoomed toward the escalator and selected column, and clicked near the column to choose a reference point.", "intent": "Continue the array setup by selecting the reference point.", "app": "SketchUp", "details": "The status bar stated, \"Please pick reference point on a group or component.\""}, {"start_s": 27857.681, "end_s": 27869.769, "action": "Clicked near the base of the selected column and then clicked farther along the red axis to define the column direction.", "intent": "Define the linear direction for the array.", "app": "SketchUp", "details": "The status bar changed from picking a start point to picking the column direction."}, {"start_s": 27869.769, "end_s": 27880.924, "action": "Scrolled repeatedly in the SketchUp viewport while viewing a close-up of the escalator structure and adjacent vertical rectangular elements.", "intent": "Adjust the 3D view to inspect the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 27880.924, "end_s": 27891.032, "action": "Scrolled and used middle-button view navigation to zoom out from the close-up, revealing the escalator, stairs, spiral feature, room model, and grouped vertical elements.", "intent": "Reframe the model for a broader inspection.", "app": "SketchUp 2024", "details": null}, {"start_s": 27891.032, "end_s": 27900.888, "action": "Selected and navigated around the model with repeated scrolling and middle-button movements, progressively zooming far out until the model appeared small near the origin.", "intent": "Change the camera distance and viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 27900.888, "end_s": 27910.888, "action": "Scrolled and adjusted the view back toward the model, then activated a face-selection/offset tool; the toolbar showed an offset value of 6594.38 mm.", "intent": "Prepare to modify a selected face or generate geometry.", "app": "SketchUp 2024", "details": "The face-selection and offset controls were visible at the end of the span."}, {"start_s": 27910.888, "end_s": 27921.849, "action": "Navigated closer to the escalator and vertical blocks, selected a face, and worked with the offset tool; the offset field later showed 0.00 mm and the viewport displayed an instruction to drag the face or type an offset.", "intent": "Apply or adjust an offset on model geometry.", "app": "SketchUp 2024", "details": "The tool remained active with face-selection, offset, and finishing controls visible."}, {"start_s": 27921.849, "end_s": 27931.258, "action": "Orbit-navigated around the escalator and vertical blocks, selected faces, and adjusted the active offset preview; the offset field showed approximately 1217.58 mm and the tool displayed a prompt to click or press Return to exit.", "intent": "Continue modifying the selected faces with the offset tool.", "app": "SketchUp 2024", "details": "The offset operation remained active at the end of the span."}, {"start_s": 27931.258, "end_s": 27941.113, "action": "Clicked through the SketchUp modeling view and adjusted the active tool, changing the displayed offset from 6594.38 mm to approximately 730.03 mm while repositioning the view around the escalator and column geometry.", "intent": "Adjust the active modeling operation and inspect the resulting geometry.", "app": "SketchUp 2024", "details": "The interface showed a green prompt to click or press Return to exit the active operation."}, {"start_s": 27941.113, "end_s": 27951.016, "action": "Exited the active modeling tool with Escape, briefly used keyboard input, and zoomed far out to view the broader model.", "intent": "Return to selection mode and review the overall model layout.", "app": "SketchUp 2024", "details": "The view changed from a close-up of the escalator and columns to a distant overview."}, {"start_s": 27951.016, "end_s": 27961.514, "action": "Zoomed and repositioned the camera around the model, then activated a drawing tool and began positioning a new small rectangular shape near the red axis.", "intent": "Set up and begin drawing geometry in the model.", "app": "SketchUp 2024", "details": "The status bar indicated a first-corner drawing step and the Dimensions field was visible."}, {"start_s": 27961.514, "end_s": 27971.545, "action": "Zoomed closer, clicked and dragged to define the rectangle's opposite corner, and completed the small rectangular face beside the existing column group.", "intent": "Create a small rectangular piece of geometry near the modeled structures.", "app": "SketchUp 2024", "details": "The rectangle remained selected after completion."}, {"start_s": 27971.545, "end_s": 27985.216, "action": "Paused briefly while system configuration changed, then right-clicked the new rectangular geometry to open its context menu.", "intent": "Open available editing commands for the newly created geometry.", "app": "SketchUp 2024", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, and other modeling commands."}, {"start_s": 27985.216, "end_s": 27995.546, "action": "Selected a command from the context menu, then clicked the rectangular geometry and entered keyboard inputs while continuing to work on the selected face.", "intent": "Modify or inspect the newly created rectangular geometry.", "app": "SketchUp 2024", "details": "The context menu closed and the small rectangle remained highlighted in the modeling view."}, {"start_s": 27995.546, "end_s": 28005.352, "action": "Selected a rectangular face, typed a value, and used Push/Pull to extend it into a tall rectangular post beside the existing group of posts.", "intent": "Create or modify a rectangular post in the SketchUp model.", "app": "SketchUp", "details": "The selected face was visibly pulled upward into a vertical prism."}, {"start_s": 28005.352, "end_s": 28019.438, "action": "Navigated the 3D view with orbit/zoom gestures, then selected the new post and activated the 1001bit.com Rectangular Array tool.", "intent": "Prepare the new post for array duplication.", "app": "SketchUp", "details": "The post remained visible to the right of the existing array, and the array tool became active."}, {"start_s": 28019.438, "end_s": 28032.898, "action": "Edited the Rectangular Array dialog fields, changing the column and row counts to 5 and 6, then left the dialog open.", "intent": "Configure the number of columns and rows for a rectangular array.", "app": "SketchUp", "details": "The dialog showed 5 columns and 3 rows at the end of the span; the typed edits included 5 and 6."}, {"start_s": 28032.898, "end_s": 28042.842, "action": "Returned to the model, zoomed toward the posts, and clicked to choose a reference point and start point for the array operation.", "intent": "Define the array placement reference and direction.", "app": "SketchUp", "details": "The status bar prompted for a reference point on a group or component and then for a start point."}, {"start_s": 28042.842, "end_s": 28053.185, "action": "Selected and navigated around the post group, orbiting and zooming the view until the duplicated posts were visible in an expanded grid.", "intent": "Inspect the resulting rectangular array.", "app": "SketchUp", "details": "The view changed from a close perspective to an overhead-like view showing multiple repeated rows and columns."}, {"start_s": 28053.185, "end_s": 28063.225, "action": "Orbited the model slightly to review the completed post array alongside the escalator and the smaller group of blocks.", "intent": "Review the final arrangement in the 3D model.", "app": "SketchUp", "details": "The repeated rectangular grid remained visible with no further geometry changes."}, {"start_s": 28063.225, "end_s": 28071.08, "action": "Orbit the SketchUp view around the escalator and groups of rectangular blocks, then zoom out to show more of the model.", "intent": "Inspect the 3D model from a wider angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 28071.08, "end_s": 28081.323, "action": "Orbit and zoom the SketchUp camera, shifting from a broad model view to a closer view of the escalator and two block arrangements.", "intent": "Review the placement and arrangement of modeled components.", "app": "SketchUp 2024", "details": null}, {"start_s": 28081.323, "end_s": 28091.562, "action": "Orbit and zoom around the model, then drag-select the larger right-hand block arrangement so it becomes highlighted in blue.", "intent": "Select the larger group of blocks for further editing.", "app": "SketchUp 2024", "details": "The larger right-side block group is visibly selected at the end."}, {"start_s": 28091.562, "end_s": 28101.586, "action": "Orbit and zoom far out to view the overall model, reducing the visible block arrangements and leaving the escalator and surrounding structures in a distant view.", "intent": "Inspect the model at a wider scale.", "app": "SketchUp 2024", "details": "Typed 'R' while navigating; no specific resulting command is visible."}, {"start_s": 28101.586, "end_s": 28112.456, "action": "Orbit and zoom back toward the escalator and remaining blocks, activate a drawing tool, and begin positioning a new rectangular shape on the ground plane.", "intent": "Create an additional modeled element near the existing components.", "app": "SketchUp 2024", "details": "A small rectangle outline and drawing cursor are visible; the shape is not clearly completed within the span."}, {"start_s": 28112.456, "end_s": 28126.793, "action": "Use editing tools on the newly created vertical rectangular prism, including repeated clicks and a push/pull operation, then leave the prism selected while switching tools and briefly hiding and restoring the SketchUp window.", "intent": "Modify the new prism and continue arranging the model.", "app": "SketchUp 2024", "details": "The final view shows the upright prism outlined in blue; the app is briefly hidden and then unhidden."}, {"start_s": 28126.793, "end_s": 28132.329, "action": "Opened the 1001bit.com Linear Array dialog over the SketchUp kitchen model, then clicked near the dialog\u2019s lower-left controls and returned to the model window.", "intent": "Prepare or exit the linear array tool.", "app": "SketchUp 2024", "details": "The dialog showed array options including 10 entities and 300.00 mm spacing."}, {"start_s": 28132.329, "end_s": 28144.337, "action": "Selected the Linear Array tool and clicked in the model workspace to begin defining an array direction; briefly scrolled and pressed Space and Escape, then activated the tool again.", "intent": "Start a linear array operation on the selected model geometry.", "app": "SketchUp 2024", "details": "The status bar indicated that the tool was waiting to pick a start point."}, {"start_s": 28144.337, "end_s": 28154.457, "action": "Clicked two points in the workspace to define the array direction and completed the operation, creating a row of repeated vertical rectangular elements to the right of the existing group.", "intent": "Create a linear array of the selected rectangular component.", "app": "SketchUp 2024", "details": "The resulting array visibly contains multiple evenly spaced upright panels."}, {"start_s": 28154.457, "end_s": 28173.818, "action": "Left the completed array visible without further modeling changes and typed @ near the end of the interval.", "intent": "Pause after creating the array.", "app": "SketchUp 2024", "details": "The SketchUp model remained unchanged with the new row of panels visible."}, {"start_s": 28173.818, "end_s": 28193.818, "action": "Remained idle while viewing the SketchUp model and the completed row of repeated panels.", "intent": "Review the modeled array.", "app": "SketchUp 2024", "details": null}, {"start_s": 28193.818, "end_s": 28210.114, "action": "Kept the model view unchanged and typed # near the end of the interval.", "intent": "Continue reviewing the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 28210.114, "end_s": 28223.443, "action": "Paused on the SketchUp model view showing an escalator, stair elements, and rows of rectangular blocks.", "intent": "Review the current 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 28223.443, "end_s": 28233.416, "action": "Clicked repeatedly around the right-hand row of rectangular blocks and selected the far-right block, leaving it highlighted with a bounding box.", "intent": "Select a rectangular model component for inspection or editing.", "app": "SketchUp 2024", "details": "The far-right block in the long row is selected at the end of the span."}, {"start_s": 28233.416, "end_s": 28242.293, "action": "Clicked additional blocks, then orbited and zoomed the camera to an overhead view of the escalator and grouped rectangular elements.", "intent": "Inspect the model from a different viewpoint.", "app": "SketchUp 2024", "details": "The view changed from a close side view to a top-down perspective."}, {"start_s": 28242.293, "end_s": 28251.97, "action": "Orbited and zoomed out to frame the broader model, including the building, stairs, escalator, separated block groups, and the long row; selected a block near the row.", "intent": "Review the spatial arrangement of the modeled components.", "app": "SketchUp 2024", "details": "The camera ended on a wider view with one block outlined in blue."}, {"start_s": 28251.97, "end_s": 28262.01, "action": "Orbited and zoomed the scene, dragged a selection marquee around the long row of blocks, typed M, and clicked near the selected group.", "intent": "Select and begin manipulating the long row of rectangular components.", "app": "SketchUp 2024", "details": "A dashed selection rectangle surrounds the long row near the end of the span."}, {"start_s": 28262.01, "end_s": 28272.736, "action": "Zoomed and orbited farther out, clicked the model, and left the long row selected in blue while displaying the full arrangement of the building, stairs, escalator, and block groups.", "intent": "Inspect the selected row within the overall model layout.", "app": "SketchUp 2024", "details": "The final view is a wider perspective with the long row highlighted."}, {"start_s": 28272.736, "end_s": 28288.81, "action": "Orbiting and zooming the SketchUp model changed the view from a close-up of the escalator and repeated components to a wider view of the scene.", "intent": "Adjust the 3D view to inspect the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 28288.81, "end_s": 28298.992, "action": "Continued orbiting and zooming out, revealing more of the modeled scene and reducing the objects to a smaller view.", "intent": "Inspect the overall model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 28298.992, "end_s": 28316.611, "action": "Selected a component and manipulated the view; a copied narrow rectangular object appeared to the right, then switched to the Polar Array tool/application.", "intent": "Prepare an object for array creation.", "app": "SketchUp 2024", "details": "The Polar Array tool status indicated that items were being copied or placed."}, {"start_s": 28316.611, "end_s": 28323.515, "action": "Opened the Polar Array dialog, showing an angle of 360 degrees, 30 entities, and 0.00 mm total distance along the center axis.", "intent": "Configure a circular array of the selected geometry.", "app": "SketchUp 2024", "details": "The dialog provided Create Array and Exit controls."}, {"start_s": 28323.515, "end_s": 28330.919, "action": "Returned to the SketchUp model, zoomed and orbited around the selected narrow rectangular object, and clicked to begin defining the array operation.", "intent": "Position and initiate the array placement.", "app": "SketchUp 2024", "details": "The status bar requested a start point."}, {"start_s": 28330.919, "end_s": 28340.171, "action": "Zoomed in on the selected rectangular object and entered the next array input, leaving the tool waiting for selection of the rotation axis.", "intent": "Define the rotation axis for the array.", "app": "SketchUp 2024", "details": "The status bar displayed \u201cPlease pick axis of rotation.\u201d"}, {"start_s": 28340.171, "end_s": 28350.777, "action": "Changed the input source and issued brief keystrokes while SketchUp remained in the rotation-tool state with a selected rectangular component.", "intent": "Continue the active SketchUp modeling operation.", "app": "SketchUp", "details": "No visible geometry change occurred."}, {"start_s": 28350.777, "end_s": 28360.631, "action": "Clicked and used middle-button navigation with scroll gestures to orbit and zoom out from the selected component, revealing a larger scene with repeated rectangular parts and a circular radial assembly.", "intent": "Inspect the model from a wider viewpoint.", "app": "SketchUp", "details": "The view changed substantially through orbiting and zooming."}, {"start_s": 28360.631, "end_s": 28370.9, "action": "Orbited and zoomed around the model, then switched to the SketchUp window titled \u201c1001pro.com Polar Array\u201d and hovered over the circular-array toolbar control.", "intent": "Review or access the polar-array modeling tool.", "app": "SketchUp", "details": "The toolbar tooltip identified the control as creating an array of groups/components in a circular direction."}, {"start_s": 28370.9, "end_s": 28380.673, "action": "Returned to the KITCHEN2 SketchUp window, selected the rectangular component, and clicked to define points while the status bar prompted for a start point and then a rotation axis.", "intent": "Set up a rotation or circular-array operation on the component.", "app": "SketchUp", "details": "The component remained selected and no completed transformation was visible."}, {"start_s": 28380.673, "end_s": 28391.151, "action": "Used middle-button navigation and extensive scrolling to orbit and zoom around the model, changing the view from the component to a tall cylindrical radial array.", "intent": "Inspect the resulting circular arrangement from different distances and angles.", "app": "SketchUp", "details": "The final view showed repeated vertical elements forming a cylindrical array."}, {"start_s": 28391.151, "end_s": 28404.265, "action": "Continued orbiting and zooming around the cylindrical radial array, moving from a broader view to a close-up of its top and repeated perimeter elements.", "intent": "Examine the circular array geometry closely.", "app": "SketchUp", "details": "No additional geometry edit was clearly visible; navigation focused on viewing the array."}, {"start_s": 28404.265, "end_s": 28416.492, "action": "Navigated and zoomed within the SketchUp model, clicked around the cylindrical and adjacent architectural objects, dragged across the model, and ended on a wider view of the scene.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 28416.492, "end_s": 28436.492, "action": "Remained in SketchUp with the architectural model visible, including an escalator, stairs, grouped vertical elements, and a row of panels; no substantive interaction was recorded.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": "The active application remained SketchUp despite a reported recorder window transition."}, {"start_s": 28436.492, "end_s": 28456.492, "action": "Stayed on the same SketchUp view of the architectural model while the system briefly idled and resumed; no visible modeling action occurred.", "intent": "Wait and review the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 28456.492, "end_s": 28467.146, "action": "Scrolled repeatedly to adjust the SketchUp camera, shifting the escalator and grouped vertical elements toward the left and bringing the row of panels into a closer view.", "intent": "Reposition and inspect the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 28467.146, "end_s": 28477.346, "action": "Activated the Rectangle tool, clicked to define corners, and created a large rectangular face to the right of the existing model elements.", "intent": "Add a rectangular planar element to the SketchUp model.", "app": "SketchUp 2024", "details": "The rectangle was visible as a white face after creation."}, {"start_s": 28477.346, "end_s": 28490.785, "action": "Adjusted the camera with middle-button clicks and scrolling, then clicked the newly created rectangular face several times, leaving it selected with a blue stippled highlight.", "intent": "Review the new rectangle and reposition the model view.", "app": "SketchUp 2024", "details": "The final view showed the rectangle selected alongside the existing architectural components."}, {"start_s": 28490.785, "end_s": 28500.313, "action": "Clicked repeatedly on the rectangular face and nearby model areas, leaving the face visibly selected.", "intent": "Select or target the rectangular model face.", "app": "SketchUp 2024", "details": null}, {"start_s": 28500.313, "end_s": 28508.145, "action": "Continued clicking the rectangular face, then right-clicked it and clicked a toolbar control; the face remained selected and its visible fill changed to white.", "intent": "Inspect or modify the selected face using contextual and toolbar controls.", "app": "SketchUp 2024", "details": null}, {"start_s": 28508.145, "end_s": 28518.475, "action": "Changed the input source and scrolled briefly, shifting the view while keeping the rectangular face selected.", "intent": "Adjust the modeling view around the selected face.", "app": "SketchUp 2024", "details": null}, {"start_s": 28518.475, "end_s": 28538.475, "action": "Paused on the SketchUp model with the rectangular face selected; no substantive modeling change was visible.", "intent": "Review the current model state.", "app": "SketchUp 2024", "details": null}, {"start_s": 28538.475, "end_s": 28548.433, "action": "Clicked repeatedly on the selected rectangular face, which became enclosed by a dotted bounding box and appeared in a more active editing state.", "intent": "Activate or select the rectangular object for editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 28548.433, "end_s": 28555.482, "action": "Pressed P, clicked the face, scrolled, and used middle-button dragging to orbit and zoom; the flat face became a rectangular box-like extrusion and the camera rotated to show its top and side faces.", "intent": "Push-pull the selected face into a 3D volume and inspect the result.", "app": "SketchUp 2024", "details": null}, {"start_s": 28555.482, "end_s": 28565.257, "action": "Switched input sources, clicked the selected front face, and scrolled to adjust the SketchUp view, leaving the face selected and the model slightly reframed.", "intent": "Adjust the 3D view around the selected model face.", "app": "SketchUp", "details": "Selected rectangular face remained highlighted; distance readout changed from approximately 17232.12 m to 1790.58 m."}, {"start_s": 28565.257, "end_s": 28579.741, "action": "Navigated the SketchUp viewport with middle-clicks, a spacebar input, and repeated clicks, then switched back to the SketchUp window and hovered over the Create window frame tool.", "intent": "Inspect the model and return focus to SketchUp tools.", "app": "SketchUp", "details": "The model was shown from a more front-facing view, and the Create window frame tooltip was visible at the end."}, {"start_s": 28579.741, "end_s": 28589.105, "action": "Reactivated SketchUp, clicked the rectangular model face, and navigated the viewport; the face became unselected while the view zoomed and orbited toward it.", "intent": "Select and inspect the rectangular face in the 3D model.", "app": "SketchUp", "details": "The face was briefly shown with a loading indicator, then appeared outlined in blue after orbit navigation."}, {"start_s": 28589.105, "end_s": 28600.521, "action": "Middle-clicked and repeatedly scrolled to orbit and zoom around the selected rectangular face, moving from a broader view to a close angled view of its surface and edges.", "intent": "Examine the selected face and surrounding geometry from different angles.", "app": "SketchUp", "details": "The rectangular face remained outlined in blue throughout the navigation."}, {"start_s": 28600.521, "end_s": 28606.146, "action": "Continued scrolling and middle-click navigation to zoom and orbit closer along the selected face\u2019s top and side edges.", "intent": "Refine the close-up inspection of the selected model geometry.", "app": "SketchUp", "details": "The view ended on a tight close-up of the upper-right portion of the blue-outlined face and adjacent side."}, {"start_s": 28606.146, "end_s": 28615.913, "action": "Scrolled extensively to zoom back out and reframe the selected rectangular object, then middle-clicked to adjust the viewpoint and zoomed back toward its lower edge.", "intent": "Reposition the camera to inspect the object at multiple scales.", "app": "SketchUp", "details": "The selected object was briefly visible as a small upright panel within its bounding box before the final close-up."}, {"start_s": 28615.913, "end_s": 28626.227, "action": "Switched input sources, orbited and scrolled around the selected rectangular solid, then clicked repeatedly on its front face and activated a modeling tool, leaving the face selected.", "intent": "Inspect and begin editing the rectangular model.", "app": "SketchUp 2024", "details": null}, {"start_s": 28626.227, "end_s": 28636.08, "action": "Orbited around the rectangular solid and adjusted the view with middle-click navigation, then clicked around the model and left it deselected in a closer perspective view.", "intent": "Review the model from different angles.", "app": "SketchUp 2024", "details": null}, {"start_s": 28636.08, "end_s": 28650.441, "action": "Orbited and zoomed out to reveal the rectangular solid alongside the surrounding modeled objects, then clicked near the scene.", "intent": "Inspect the model in its broader scene context.", "app": "SketchUp 2024", "details": null}, {"start_s": 28650.441, "end_s": 28660.272, "action": "Adjusted the view and repeatedly clicked the rectangular face, selecting it and leaving a modeling tool active with the face highlighted.", "intent": "Select the face for a subsequent modeling operation.", "app": "SketchUp 2024", "details": null}, {"start_s": 28660.272, "end_s": 28672.736, "action": "Clicked the lower portion of the selected face and entered a vertical-distance operation, leaving the face highlighted and the tool prompting for a vertical distance.", "intent": "Set or adjust the face\u2019s vertical dimension.", "app": "SketchUp 2024", "details": null}, {"start_s": 28672.736, "end_s": 28680.48, "action": "Clicked reference points on the selected face and its upper edge while the vertical-distance tool remained active, leaving the face highlighted with the distance field at 0.00 mm.", "intent": "Continue defining the vertical measurement or transformation.", "app": "SketchUp 2024", "details": null}, {"start_s": 28680.48, "end_s": 28690.106, "action": "Scrolled around the close-up model, switched input source, and clicked near the lower-right corner while the measurement tool remained active.", "intent": "Adjust the view and reference point for measuring the model.", "app": "SketchUp 2024", "details": "The status bar indicated a pending reference point and a vertical-distance inference appeared near the cursor."}, {"start_s": 28690.106, "end_s": 28694.433, "action": "Clicked repeatedly near the lower-right model corner to set or refine the measurement reference.", "intent": "Continue positioning the measurement reference on the model edge.", "app": "SketchUp 2024", "details": "The status bar changed between vertical-distance entry and picking a reference point; no typed distance was visible."}, {"start_s": 28694.433, "end_s": 28706.169, "action": "Scrolled extensively to orbit or zoom out from the close-up, revealing the larger framed panel and nearby repeated model components.", "intent": "Inspect the surrounding model geometry and reposition the view.", "app": "SketchUp 2024", "details": "The measurement tool remained active with a pending reference point."}, {"start_s": 28706.169, "end_s": 28715.744, "action": "Clicked near the panel, scrolled to reposition the view, and clicked near its upper-left edge to establish another reference point.", "intent": "Set a measurement reference on the framed panel.", "app": "SketchUp 2024", "details": "A visible \u201cPick a reference point\u201d prompt remained, and the measurement field showed an approximate distance after the later click."}, {"start_s": 28715.744, "end_s": 28725.465, "action": "Clicked near the lower portion of the panel, scrolled to broaden the view, typed \u201cN \u201d, clicked near the panel edge, and middle-clicked to orbit the model.", "intent": "Reorient the scene and inspect the panel relative to nearby components.", "app": "SketchUp 2024", "details": "The view expanded to include an escalator-like object and repeated vertical elements; the orbit tool became active after the middle click."}, {"start_s": 28725.465, "end_s": 28738.291, "action": "Middle-clicked and orbited or navigated around the scene, clicked several model areas, then zoomed or repositioned to show the complete arrangement and selected the large framed panel.", "intent": "Review the overall model layout and select the panel object.", "app": "SketchUp 2024", "details": "The final view showed multiple components aligned along the axis, with the large panel outlined in blue."}, {"start_s": 28738.291, "end_s": 28747.067, "action": "Typed a character, scrolled the SketchUp view, and clicked twice near the base of the outlined rectangular object while the Move tool remained active.", "intent": "Adjust the view and position of a selected model element.", "app": "SketchUp 2024", "details": "The view moved closer to the rows of rectangular blocks and the outlined object; the distance readout changed during the move."}, {"start_s": 28747.067, "end_s": 28759.04, "action": "Continued moving the selected object along the blue axis while scrolling to inspect the adjacent rectangular blocks and outlined object.", "intent": "Continue positioning the selected model element along a constrained axis.", "app": "SketchUp 2024", "details": "The status bar showed Move mode and an On Blue Axis inference."}, {"start_s": 28759.04, "end_s": 28779.04, "action": "Clicked to place the moved selection, then scrolled substantially to zoom the SketchUp model out for a wider view.", "intent": "Finalize the placement and review the overall model layout.", "app": "SketchUp 2024", "details": "The model changed from a close-up of the blocks to a distant view containing the full scene."}, {"start_s": 28779.04, "end_s": 28788.992, "action": "Used middle-click orbit controls twice to rotate the camera around the model, then entered space and M keystrokes.", "intent": "Inspect the model from different viewing angles.", "app": "SketchUp 2024", "details": "The camera rotated from an angled view to a more front-facing view of the model."}, {"start_s": 28788.992, "end_s": 28799.815, "action": "Scrolled to adjust the view, then clicked twice on the outlined rectangular object to select or begin moving it.", "intent": "Refine the view and initiate another object adjustment.", "app": "SketchUp 2024", "details": "The outlined object remained highlighted in blue and the Move tool status was visible."}, {"start_s": 28799.815, "end_s": 28814.452, "action": "Clicked and moved the selected rectangular object, zoomed and orbited the view, then clicked to place it and switched back to the Select tool.", "intent": "Reposition the large rectangular model element and review its placement.", "app": "SketchUp 2024", "details": "The rectangular object was moved substantially relative to the escalator and rows of blocks; the final status bar showed selection mode."}, {"start_s": 28814.452, "end_s": 28824.72, "action": "Switched to the SketchUp window and repeatedly scrolled with no visible directional change, reframing the 3D model from a close view to a more distant view.", "intent": "Adjust the 3D view of the model.", "app": "SketchUp 2024", "details": "The model shows a large rectangular panel and smaller objects arranged along the ground plane."}, {"start_s": 28824.72, "end_s": 28837.416, "action": "Used middle-click orbit/navigation gestures and scrolling to rotate and zoom around the model, ending on a closer angled view of the rectangular panel.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2024", "details": "The rectangular panel remained the primary visible object during navigation."}, {"start_s": 28837.416, "end_s": 28847.23, "action": "Orbited and scrolled around the scene, then clicked the rectangular panel repeatedly until it appeared selected with a bounding box.", "intent": "Select and inspect the rectangular model component.", "app": "SketchUp 2024", "details": "The panel became outlined and enclosed by a dotted selection box."}, {"start_s": 28847.23, "end_s": 28858.401, "action": "Continued orbiting and scrolling around the selected panel, changing from an angled view to a more front-facing view while keeping the surrounding objects visible.", "intent": "Review the selected component and its placement in the scene.", "app": "SketchUp 2024", "details": "The panel remained prominent while the camera moved around it."}, {"start_s": 28858.401, "end_s": 28868.639, "action": "Scrolled extensively to zoom and reposition the camera, then clicked the rectangular panel twice; the view ended in a close-up of its upper edge.", "intent": "Zoom in and inspect the panel geometry.", "app": "SketchUp 2024", "details": "The panel filled much of the viewport and was outlined in blue after selection."}, {"start_s": 28868.639, "end_s": 28878.472, "action": "Clicked repeatedly on the panel's upper edge and scrolled further, maintaining a very close view; issued a single empty typing event at the end.", "intent": "Continue selecting or inspecting the panel edge at close range.", "app": "SketchUp 2024", "details": "The close-up showed the panel's top edge and horizontal division line, with selection outlines visible."}, {"start_s": 28878.472, "end_s": 28888.174, "action": "Clicked and orbited around the selected rectangular panel, then adjusted the view with additional clicks and scroll input.", "intent": "Inspect the panel model from different angles.", "app": "SketchUp 2024", "details": "The panel remained selected and its perspective changed."}, {"start_s": 28888.174, "end_s": 28908.174, "action": "Scrolled to zoom in on the selected panel and then made minor view adjustments, leaving the panel enlarged in the workspace.", "intent": "Examine the panel more closely.", "app": "SketchUp 2024", "details": "The selected panel occupied much more of the viewport by the end of the span."}, {"start_s": 28908.174, "end_s": 28918.522, "action": "Scrolled and adjusted the camera, then dragged across the model area and clicked the panel, leaving the rectangular panel highlighted in blue.", "intent": "Reframe the model and select the panel.", "app": "SketchUp 2024", "details": "The final view showed the full row of models with the panel selected."}, {"start_s": 28918.522, "end_s": 28935.208, "action": "Scrolled repeatedly to zoom out and reposition the camera, changing from the panel-focused view to a wider view of the row of models.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2024", "details": "The panel moved out of view while the smaller models remained visible."}, {"start_s": 28935.208, "end_s": 28944.745, "action": "Scrolled repeatedly to zoom much farther out, reducing the entire model arrangement to a small cluster near the axes.", "intent": "Inspect the model layout at a broader scale.", "app": "SketchUp 2024", "details": "The scene became highly zoomed out."}, {"start_s": 28944.745, "end_s": 28954.246, "action": "Scrolled and made several middle-button view adjustments, then continued navigating around the zoomed-out model cluster.", "intent": "Reposition and review the model scene.", "app": "SketchUp 2024", "details": "The final view showed the model group slightly enlarged and repositioned near the origin."}, {"start_s": 28954.246, "end_s": 28963.23, "action": "Scrolled and adjusted the view, then clicked to complete a rectangular face beside the existing row of blocks.", "intent": "Create a new rectangular face in the model.", "app": "SketchUp 2024", "details": "A small outlined rectangle became a filled gray face."}, {"start_s": 28963.23, "end_s": 28973.4, "action": "Clicked the new rectangular face repeatedly until it became selected, then paused with the face highlighted.", "intent": "Select the newly created face for editing.", "app": "SketchUp 2024", "details": "The face is shown with SketchUp's dotted selection pattern."}, {"start_s": 28973.4, "end_s": 28982.84, "action": "Kept the face selected and activated Push/Pull, leaving the tool ready to extrude the face.", "intent": "Prepare to extrude the selected face.", "app": "SketchUp 2024", "details": "The Push/Pull cursor and status prompt are visible; no extrusion distance was entered yet."}, {"start_s": 28982.84, "end_s": 28992.999, "action": "Clicked and used the Push/Pull operation on the selected face, then orbited the view to inspect the resulting raised block.", "intent": "Extrude the face into a three-dimensional block and inspect it.", "app": "SketchUp 2024", "details": "The former flat face is now the top of a short rectangular solid."}, {"start_s": 28992.999, "end_s": 29012.999, "action": "Continued pushing the selected top face upward, substantially increasing the height of the rectangular block.", "intent": "Extend the block vertically.", "app": "SketchUp 2024", "details": "The block grew into a tall rectangular prism; the Push/Pull distance field shows approximately 2776.93 mm."}, {"start_s": 29012.999, "end_s": 29032.999, "action": "Clicked the top face twice while Push/Pull remained active, leaving the tall rectangular prism selected for further editing.", "intent": "Continue editing the block's top face.", "app": "SketchUp 2024", "details": "The top face remains highlighted and the distance field shows approximately 1985.54 mm."}, {"start_s": 29032.999, "end_s": 29042.79, "action": "Typed \"N\" into the Push/Pull distance field, then clicked away to apply the operation and return to selection mode.", "intent": "Complete or confirm a Push/Pull operation on the box.", "app": "SketchUp 2024", "details": "The box's top face changed from stippled selection to an unselected gray face."}, {"start_s": 29042.79, "end_s": 29049.374, "action": "Clicked and used middle-button navigation with a brief scroll burst to orbit or adjust the view around the box and repeated slotted forms.", "intent": "Inspect the modeled objects from a different angle.", "app": "SketchUp 2024", "details": "The view shifted to a closer angled perspective showing the box and rows of repeated blocks."}, {"start_s": 29049.374, "end_s": 29060.274, "action": "Performed a brief scroll-based view adjustment while keeping the box and repeated blocks in view.", "intent": "Refine the viewport framing for inspection.", "app": "SketchUp 2024", "details": "The box remained prominent with its right vertical edge highlighted blue."}, {"start_s": 29060.274, "end_s": 29069.472, "action": "Performed two scroll actions to adjust the view around the box.", "intent": "Continue positioning the model for the next editing operation.", "app": "SketchUp 2024", "details": "The box and repeated blocks remained visible at a slightly changed scale and angle."}, {"start_s": 29069.472, "end_s": 29079.783, "action": "Selected the box edge, activated the edge-offset/bevel tool, and applied the operation to round the box's front-right edges.", "intent": "Create a rounded bevel on the box geometry.", "app": "SketchUp 2024", "details": "The box changed from sharp-edged geometry to a form with visibly rounded front and side edges."}, {"start_s": 29079.783, "end_s": 29092.238, "action": "Adjusted the view with a short scroll burst, selected the rounded box, then switched to the Orbit tool and dragged to rotate the model.", "intent": "Inspect the completed rounded geometry from another angle.", "app": "SketchUp 2024", "details": "The rounded box was briefly outlined green before the final orbit view showed it unselected."}, {"start_s": 29092.238, "end_s": 29102.294, "action": "Clicked in the SketchUp model, scrolled the view, briefly typed a space, and clicked the rounded block area twice.", "intent": "Adjust the model view and interact with the selected modeling tool.", "app": "SketchUp 2024", "details": "The view remained focused on a rounded rectangular block and nearby vertical geometry."}, {"start_s": 29102.294, "end_s": 29112.638, "action": "Clicked the modeling toolbar twice, then clicked the block edge twice to define an offset; the edge became highlighted and the offset readout changed to approximately 46.92 mm.", "intent": "Offset a selected edge of the model.", "app": "SketchUp 2024", "details": "The status bar showed the edge offset tool and an offset value."}, {"start_s": 29112.638, "end_s": 29130.347, "action": "Clicked and manipulated the model view with middle-button orbiting and scrolling, then zoomed out to reveal more of the repeated blocks, escalator-like structure, and surrounding geometry.", "intent": "Inspect the larger 3D model arrangement.", "app": "SketchUp 2024", "details": "The view changed from a close-up block to a broad overview of the scene."}, {"start_s": 29130.347, "end_s": 29135.472, "action": "Switched to the recorder window and orbited and scrolled the SketchUp view, changing from a distant overview to a clearer angled view of the full set of modeled objects.", "intent": "Review the model from another view.", "app": "SketchUp 2024", "details": "The SketchUp scene was displayed with multiple architectural and mechanical forms."}, {"start_s": 29135.472, "end_s": 29147.782, "action": "Continued navigating the SketchUp model with repeated scrolls and a middle-button drag, bringing the block row, grouped vertical pieces, and escalator-like assembly into a closer side view.", "intent": "Inspect model components at a more useful scale.", "app": "SketchUp 2024", "details": "No geometry changes were visibly confirmed; navigation focused on framing the components."}, {"start_s": 29147.782, "end_s": 29151.992, "action": "Orbited and scrolled extensively around the model, moving from a distant scene view to a closer view of the escalator-like structure, repeated blocks, and rounded block.", "intent": "Continue examining the 3D model from different angles.", "app": "SketchUp 2024", "details": "The final view showed the escalator-like object on the left and rows of repeated blocks beside the rounded block."}, {"start_s": 29151.992, "end_s": 29169.528, "action": "Scrolled repeatedly in the SketchUp viewport while keeping the model view active.", "intent": "Adjust the viewport view of the 3D model.", "app": "SketchUp", "details": null}, {"start_s": 29169.528, "end_s": 29177.63, "action": "Scrolled and middle-clicked in the viewport, shifting the visible model and leaving the view centered on the rounded solid and nearby objects.", "intent": "Navigate and reposition the 3D scene.", "app": "SketchUp", "details": null}, {"start_s": 29177.63, "end_s": 29189.342, "action": "Zoomed in on the rounded solid, pressed Space, and clicked its left side repeatedly, leaving a face or edge selected in blue.", "intent": "Select geometry on the rounded solid for editing.", "app": "SketchUp", "details": "The rounded solid's left side was visibly highlighted after the clicks."}, {"start_s": 29189.342, "end_s": 29209.342, "action": "Clicked the rounded solid and then clicked its upper-right area; the view remained focused on the solid without a visible geometry change.", "intent": "Inspect or attempt to select different parts of the solid.", "app": "SketchUp", "details": null}, {"start_s": 29209.342, "end_s": 29219.848, "action": "Resized and moved a narrow Windows Explorer window, then scrolled and middle-clicked in SketchUp to change the view; typed R near the end of the interval.", "intent": "Reposition the auxiliary window and navigate the SketchUp model.", "app": "SketchUp", "details": "The SketchUp view changed from a smaller distant solid to a closer view of the rounded solid and adjacent bars."}, {"start_s": 29219.848, "end_s": 29225.241, "action": "Clicked in the viewport, activated the Rectangle tool, and dragged out a rectangular outline to the right of the rounded solid.", "intent": "Create a new rectangular face or shape beside the existing solid.", "app": "SketchUp", "details": "A large white rectangular preview/face was visible to the right, with dimensions shown in the status bar."}, {"start_s": 29225.241, "end_s": 29245.241, "action": "Remained inactive while viewing the SketchUp model, which showed several solid forms and a rectangular face.", "intent": "Observe the current 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29245.241, "end_s": 29261.254, "action": "Adjusted the SketchUp view with scroll gestures and middle-clicks, bringing a row of repeated forms and the rectangular face into view.", "intent": "Navigate and inspect the model.", "app": "SketchUp 2024", "details": "Network and system state changes also occurred during the span."}, {"start_s": 29261.254, "end_s": 29273.894, "action": "Adjusted the view, selected the rectangular face with repeated left-clicks, and opened its context menu with right-clicks.", "intent": "Select and access operations for the rectangular face.", "app": "SketchUp 2024", "details": "The face was visibly highlighted before the context menu opened."}, {"start_s": 29273.894, "end_s": 29283.682, "action": "Closed the context menu, clicked the selected face repeatedly, typed P, and continued interacting with the face; the view showed it selected and enclosed by a dotted bounding box.", "intent": "Operate on the selected face, likely using a modeling tool.", "app": "SketchUp 2024", "details": "The exact command invoked by the typed P could not be determined."}, {"start_s": 29283.682, "end_s": 29291.805, "action": "Clicked the model and adjusted the view, then typed A and clicked near the lower-left edge of the rectangular face, leaving a drawing-tool cursor and an active magenta edge visible.", "intent": "Begin drawing or editing geometry on the rectangular face.", "app": "SketchUp 2024", "details": "The active tool and resulting geometry were not fully resolved."}, {"start_s": 29291.805, "end_s": 29311.805, "action": "Remained inactive with the drawing tool active at the rectangular face; the preview changed to a curved guide from the lower-left corner without a confirmed completion.", "intent": "Continue or inspect the in-progress geometry operation.", "app": "SketchUp 2024", "details": "No recorded interaction events occurred during this span."}, {"start_s": 29311.805, "end_s": 29319.198, "action": "Clicked twice on the lower-left edge of the rectangular face while the Bulge tool was active.", "intent": "Continue shaping the curved profile on the face.", "app": "SketchUp 2024", "details": "The rectangular face and adjacent rounded solid remained visible; the tool status showed Bulge."}, {"start_s": 29319.198, "end_s": 29329.135, "action": "Clicked near the upper-left area of the rectangular face, completing a semicircular bulge along its left edge.", "intent": "Create a rounded indentation or profile on the rectangular face.", "app": "SketchUp 2024", "details": "A semicircular arc appeared along the left side of the face."}, {"start_s": 29329.135, "end_s": 29339.592, "action": "Pressed Space, then Escape twice and the undo shortcut, leaving the semicircular arc removed and the rectangular face restored.", "intent": "Cancel or undo the previous curve operation.", "app": "SketchUp 2024", "details": "The Select tool was active at the end, and the face showed no interior arc."}, {"start_s": 29339.592, "end_s": 29346.885, "action": "Pressed A and clicked on the lower-left corner and then the interior of the face to begin a new arc, dragging the bulge upward.", "intent": "Draw a new curved profile from the lower-left corner.", "app": "SketchUp 2024", "details": "A cyan arc preview extended from the lower-left corner toward the interior."}, {"start_s": 29346.885, "end_s": 29356.182, "action": "Clicked repeatedly to adjust the arc bulge and endpoint, extending the curve upward toward the top edge of the face.", "intent": "Refine the new curved boundary on the rectangular face.", "app": "SketchUp 2024", "details": "The arc became a taller S-like curve along the left side, with active bulge controls visible."}, {"start_s": 29356.182, "end_s": 29366.281, "action": "Clicked near the top of the face, scrolled to zoom the view, and completed the curve so it formed a continuous S-shaped boundary from the lower-left to the top edge.", "intent": "Finish and inspect the curved profile.", "app": "SketchUp 2024", "details": "The view zoomed in and the completed black S-shaped curve remained on the rectangular face."}, {"start_s": 29366.281, "end_s": 29376.718, "action": "Clicked and adjusted the curved edge on the rectangular face, then orbited/zoomed the SketchUp view to show the completed curve beside the other models.", "intent": "Refine the curved profile and inspect the result in the 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29376.718, "end_s": 29386.069, "action": "Orbited and zoomed toward the rectangular face, selected the face and its surrounding geometry, and clicked around the curved boundary.", "intent": "Inspect and select the face geometry for further editing.", "app": "SketchUp 2024", "details": null}, {"start_s": 29386.069, "end_s": 29395.496, "action": "Adjusted the view around the rounded solid and rectangular face, then clicked the rectangular face and surrounding edges, leaving the face selected.", "intent": "Review and select the target face and curve geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 29395.496, "end_s": 29405.71, "action": "Entered the bulge tool, clicked the curved edge and adjusted its control point and endpoint; the on-screen bulge value changed substantially while the face remained selected.", "intent": "Modify the curvature of the profile edge.", "app": "SketchUp 2024", "details": "The bulge tool status bar and changing bulge/length readouts were visible."}, {"start_s": 29405.71, "end_s": 29415.749, "action": "Clicked along the curved profile repeatedly and confirmed the bulge adjustment, changing the curve into a broader inward scallop along the left side of the face.", "intent": "Finalize the revised curved profile.", "app": "SketchUp 2024", "details": null}, {"start_s": 29415.749, "end_s": 29425.823, "action": "Used an undo/clipboard command, then clicked and adjusted the left-side curved geometry; the selected face display cleared and the profile remained as a gray scalloped region beside the white face.", "intent": "Correct or refine the recent curve edit.", "app": "SketchUp 2024", "details": null}, {"start_s": 29425.823, "end_s": 29435.603, "action": "Scrolled and adjusted the SketchUp camera view, moving from a close-up of the curved solid and sheet-like form to a wider view showing the row of rectangular solids.", "intent": "Inspect the modeled forms from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 29435.603, "end_s": 29445.022, "action": "Orbited and zoomed the SketchUp view, then selected the curved sheet-like form and activated a face-editing or push/pull tool; the form became highlighted with a measurement readout visible.", "intent": "Position and begin modifying the curved model form.", "app": "SketchUp 2024", "details": "The selected face was highlighted with a visible distance readout of 2972.45 mm."}, {"start_s": 29445.022, "end_s": 29453.998, "action": "Clicked and manipulated the model, then orbited and zoomed the camera to inspect the curved form and nearby rounded solid from multiple angles.", "intent": "Inspect the model geometry and its spatial arrangement.", "app": "SketchUp 2024", "details": null}, {"start_s": 29453.998, "end_s": 29460.503, "action": "Continued orbiting and scrolling the SketchUp view, settling on a wider perspective showing the rectangular row, rounded solid, and curved sheet-like form.", "intent": "Review the overall arrangement of the modeled objects.", "app": "SketchUp 2024", "details": "A brief busy indicator appeared near the bottom of the modeling area."}, {"start_s": 29460.503, "end_s": 29479.56, "action": "Waited with the SketchUp scene displayed; no modeling interaction was recorded until a Windows Explorer resize event near the end of the span.", "intent": "Pause while retaining the current model view.", "app": "SketchUp 2024", "details": "Windows Explorer was resized to 153x40 at 29479.06s."}, {"start_s": 29479.56, "end_s": 29489.907, "action": "Scrolled and orbited the SketchUp camera, changing from a close view of the rounded and curved forms to a wider view that revealed more of the row of rectangular solids.", "intent": "Inspect the full model arrangement from another viewpoint.", "app": "SketchUp 2024", "details": null}, {"start_s": 29489.907, "end_s": 29509.907, "action": "Clicked within the SketchUp model area and scrolled without a visible change to the close-up curved white surface.", "intent": "Inspect or adjust the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 29509.907, "end_s": 29529.907, "action": "Remained idle while SketchUp continued displaying the close-up model view.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2024", "details": "System configuration and network-related state changes were recorded during the interval."}, {"start_s": 29529.907, "end_s": 29549.907, "action": "Remained idle on the unchanged SketchUp model view.", "intent": "Continue reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29549.907, "end_s": 29569.907, "action": "Remained idle while the same close-up model view stayed visible.", "intent": "Pause during model review.", "app": "SketchUp 2024", "details": "System configuration and network-related state changes were recorded during the interval."}, {"start_s": 29569.907, "end_s": 29585.017, "action": "Scrolled repeatedly to navigate the SketchUp view, then clicked near the lower edge; the view changed from a close-up surface to a distant overview of multiple 3D objects.", "intent": "Zoom or reposition the model view for an overview.", "app": "SketchUp 2024", "details": null}, {"start_s": 29585.017, "end_s": 29595.035, "action": "Switched to the recorder window, then scrolled and middle-clicked in the SketchUp model area to adjust the overview, bringing the row of modeled objects into a closer view.", "intent": "Navigate and inspect the 3D model overview.", "app": "SketchUp 2024", "details": "The recorder window switch was recorded, while the visible application remained SketchUp."}, {"start_s": 29595.035, "end_s": 29605.042, "action": "Scrolled and middle-clicked around the SketchUp model, then repeatedly clicked the curved sheet-like object, leaving it selected and zoomed in.", "intent": "Inspect and select the curved model object.", "app": "SketchUp 2024", "details": null}, {"start_s": 29605.042, "end_s": 29616.325, "action": "Clicked the selected curved object and entered three undo keystrokes, clearing its selection and leaving the object visible without the bounding box.", "intent": "Adjust or undo the recent object selection/edit state.", "app": "SketchUp 2024", "details": null}, {"start_s": 29616.325, "end_s": 29626.891, "action": "Clicked around the curved object, scrolled slightly, typed \u201cM,\u201d and clicked its lower-left edge; the object remained visible with an edge highlighted in blue.", "intent": "Begin manipulating or selecting an edge of the curved object.", "app": "SketchUp 2024", "details": null}, {"start_s": 29626.891, "end_s": 29639.62, "action": "Used the Move tool on the preselected curved edge and scrolled to zoom; the view enlarged while the blue edge remained active and a distance readout appeared.", "intent": "Position or copy the selected curved edge/object.", "app": "SketchUp 2024", "details": "The Move tool remained active with a distance value shown."}, {"start_s": 29639.62, "end_s": 29659.62, "action": "Waited with the Move tool active; the enlarged curved sheet-like object and blue selected edge remained unchanged.", "intent": "Pause while reviewing the active move operation.", "app": "SketchUp 2024", "details": "No recorded interaction events."}, {"start_s": 29659.62, "end_s": 29669.243, "action": "Clicked near the active edge, scrolled, pressed Space, and clicked multiple points around the object; the view changed to show a second parallel curved outline and the object was no longer highlighted blue.", "intent": "Complete or exit the current object manipulation and review the resulting geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 29669.243, "end_s": 29678.338, "action": "Clicked repeatedly on the curved rectangular model and nearby areas, then adjusted the view with a brief scroll and additional clicks.", "intent": "Interact with or inspect the curved surface geometry.", "app": "SketchUp 2024", "details": "The curved rectangular face remained selected with a stippled highlight during the interaction."}, {"start_s": 29678.338, "end_s": 29685.996, "action": "Clicked the model, then used middle-button navigation and scrolling to zoom or reposition the camera, revealing more surrounding geometry.", "intent": "Inspect the model from a wider viewpoint.", "app": "SketchUp 2024", "details": "The view changed from a close-up curved face to a wider scene containing multiple modeled parts."}, {"start_s": 29685.996, "end_s": 29693.312, "action": "Paused with the SketchUp scene visible while a Windows Explorer window was resized and moved in the background.", "intent": "Manage the workspace layout without changing the model.", "app": "SketchUp 2024", "details": "No modeling change was visible; the scene remained displayed."}, {"start_s": 29693.312, "end_s": 29704.57, "action": "Restored the SketchUp window, scrolled and used middle-button navigation to orbit or pan across the scene, then continued navigating to a broader view of the modeled parts.", "intent": "Review the overall arrangement of the model components.", "app": "SketchUp 2024", "details": "The camera moved from a partial cluster to a wider view showing several separate objects."}, {"start_s": 29704.57, "end_s": 29714.33, "action": "Scrolled and navigated around the scene, selected the curved rectangular component, then continued zooming out until the complete collection of modeled objects appeared small in the workspace.", "intent": "Select and inspect the curved component in relation to the full model layout.", "app": "SketchUp 2024", "details": "The curved rectangular face was outlined in blue before the view was zoomed far out."}, {"start_s": 29714.33, "end_s": 29724.684, "action": "Used middle-button navigation and scrolling to adjust the distant camera view, keeping the full set of modeled components visible near the axes.", "intent": "Review the overall model from a distant perspective.", "app": "SketchUp 2024", "details": "The scene remained zoomed out, with several modeled parts arranged along the red axis."}, {"start_s": 29724.684, "end_s": 29738.306, "action": "Clicked in the SketchUp model, then resized and moved a narrow Windows Explorer window.", "intent": "Adjust the workspace while viewing the model.", "app": "SketchUp 2024", "details": "The 3D model remained visible; no Explorer contents were shown."}, {"start_s": 29738.306, "end_s": 29750.634, "action": "Scrolled to zoom the SketchUp view out and clicked around the model area.", "intent": "Navigate the 3D scene for inspection.", "app": "SketchUp 2024", "details": "The grouped objects became smaller in the viewport."}, {"start_s": 29750.634, "end_s": 29760.722, "action": "Scrolled and clicked repeatedly around the model, zooming in; selected the white rounded object on the right.", "intent": "Inspect and select geometry in the scene.", "app": "SketchUp 2024", "details": "The selected object was highlighted with a blue stippled outline."}, {"start_s": 29760.722, "end_s": 29770.21, "action": "Clicked and scrolled around the model, zooming the view out and repositioning the camera.", "intent": "Continue navigating and inspecting the 3D model.", "app": "SketchUp 2024", "details": "The previously selected object was no longer visible in the final view."}, {"start_s": 29770.21, "end_s": 29780.205, "action": "Scrolled repeatedly to adjust the camera scale and position around the grouped model.", "intent": "Review the model from different zoom levels.", "app": "SketchUp 2024", "details": "The objects shifted in size and position without visible geometry edits."}, {"start_s": 29780.205, "end_s": 29788.732, "action": "Scrolled further to zoom the SketchUp view out, then slightly repositioned the scene.", "intent": "Continue framing the model for inspection.", "app": "SketchUp 2024", "details": "The complete group appeared smaller near the origin axes."}, {"start_s": 29788.732, "end_s": 29808.732, "action": "Remained idle in SketchUp with the modeled scene visible.", "intent": "Pause while viewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29808.732, "end_s": 29823.1, "action": "Remained idle while the SketchUp window was briefly resized or repositioned by the system.", "intent": "Continue viewing the model after a window configuration change.", "app": "SketchUp 2024", "details": "System events included a Windows Explorer window resize and related network, power, and memory status changes."}, {"start_s": 29823.1, "end_s": 29843.1, "action": "Remained idle in SketchUp with the model unchanged on the canvas.", "intent": "Pause while viewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29843.1, "end_s": 29863.1, "action": "Waited while SketchUp remained visible; a dark transient overlay briefly covered the left side before the normal model view returned.", "intent": "Continue viewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29863.1, "end_s": 29872.988, "action": "Scrolled to zoom out and middle-clicked to adjust the 3D view, leaving the model smaller and farther from the camera.", "intent": "Change the camera view to inspect more of the model.", "app": "SketchUp 2024", "details": "The view changed from a wider model view to a more distant perspective."}, {"start_s": 29872.988, "end_s": 29886.073, "action": "Continued middle-click view navigation and scrolling, zooming toward the escalator and adjacent rectangular structures; the window was then resized or repositioned by the system.", "intent": "Inspect the escalator and nearby modeled elements more closely.", "app": "SketchUp 2024", "details": "The final view is a close-up of the escalator and rows of rectangular components."}, {"start_s": 29886.073, "end_s": 29906.073, "action": "Remained idle while viewing the SketchUp model containing an escalator and rows of rectangular blocks.", "intent": "Review the current 3D model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29906.073, "end_s": 29914.788, "action": "Resumed viewing and scrolled through the SketchUp viewport, changing the model scale to show more of the scene.", "intent": "Adjust the viewport view of the model.", "app": "SketchUp 2024", "details": "The scene became more zoomed out, revealing additional model elements on the left."}, {"start_s": 29914.788, "end_s": 29934.788, "action": "Remained idle while viewing the SketchUp model in the adjusted viewport.", "intent": "Review the displayed 3D scene.", "app": "SketchUp 2024", "details": null}, {"start_s": 29934.788, "end_s": 29948.452, "action": "Left the SketchUp window hidden, then moved and resized a Windows Explorer window.", "intent": "Manage the application windows.", "app": "Windows Explorer", "details": "SketchUp remained visually unchanged in the background evidence."}, {"start_s": 29948.452, "end_s": 29968.452, "action": "Remained idle with the SketchUp model visible, showing the escalator and aligned rectangular blocks.", "intent": "Continue reviewing the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29968.452, "end_s": 29988.452, "action": "Remained idle in SketchUp while the same 3D scene stayed on screen.", "intent": "Continue viewing the current model.", "app": "SketchUp 2024", "details": null}, {"start_s": 29988.452, "end_s": 29996.349, "action": "Navigated around the SketchUp model with repeated middle-button orbit/scroll gestures and clicks, changing the camera from a closer angled view to a wider view of the modeled structures.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2024", "details": null}, {"start_s": 29996.349, "end_s": 30006.068, "action": "Continued orbiting and zooming the SketchUp camera with middle-button gestures and clicks, pulling back to a distant view of the model and its axes.", "intent": "Adjust the viewpoint to inspect the overall model layout.", "app": "SketchUp 2024", "details": null}, {"start_s": 30006.068, "end_s": 30016.694, "action": "Entered drawing input including the R key, clicked in the model area, and began positioning a rectangular shape near the existing structures; the rectangle preview and dimensions appeared in the status area.", "intent": "Create a new rectangular component beside the existing model.", "app": "SketchUp 2024", "details": "Rectangle tool remained active while the opposite corner was being positioned."}, {"start_s": 30016.694, "end_s": 30026.027, "action": "Pressed Escape, adjusted the view with scroll gestures, then clicked twice to start positioning another rectangle near the row of vertical blocks.", "intent": "Cancel or reset the prior drawing operation and begin another rectangular shape.", "app": "SketchUp 2024", "details": "The rectangle tool was active and the view ended zoomed in on the block row."}, {"start_s": 30026.027, "end_s": 30036.342, "action": "Zoomed and clicked twice to define a large rectangle beside the existing row; the preview showed a constrained-on-plane golden-section rectangle, which was then completed as a tall white rectangular block.", "intent": "Add a new rectangular block to the model.", "app": "SketchUp 2024", "details": "The completed block appeared to the right of the existing vertical blocks."}, {"start_s": 30036.342, "end_s": 30046.035, "action": "Adjusted the camera around the new block, clicked repeatedly near it and the adjacent row, and ended with the new rectangular block selected.", "intent": "Inspect and select the newly added model element.", "app": "SketchUp 2024", "details": "The selected block was highlighted with a blue stippled face."}, {"start_s": 30046.035, "end_s": 30056.355, "action": "Selected the rectangular block repeatedly, then right-clicked and clicked the upper toolbar area; left the block outlined in blue before hiding the application.", "intent": "Manipulate and inspect the selected block in the SketchUp model.", "app": "SketchUp 2024", "details": null}, {"start_s": 30056.355, "end_s": 30066.707, "action": "Selected the block, typed P, orbited the view, and activated Push/Pull on its front face; displayed a 1500.25 mm distance while the face remained selected.", "intent": "Adjust the block\u2019s geometry using Push/Pull while inspecting the model from different angles.", "app": "SketchUp 2024", "details": "The selected front face and Push/Pull distance field were visible."}, {"start_s": 30066.707, "end_s": 30075.716, "action": "Orbited and zoomed far out to view the broader model, then selected the block and began moving it; displayed a 6019.67 mm move distance.", "intent": "Reposition the block relative to the surrounding modeled elements.", "app": "SketchUp 2024", "details": "The model overview showed the escalator, stair-like elements, rows of blocks, and the selected block."}, {"start_s": 30075.716, "end_s": 30085.451, "action": "Continued moving the selected block while zooming and orbiting toward the row of blocks; left it separated to the right with the Move tool active and a 3128.58 mm distance displayed.", "intent": "Place the block at a new location beside the existing row.", "app": "SketchUp 2024", "details": null}, {"start_s": 30085.451, "end_s": 30095.197, "action": "Continued the move, constrained it to the blue axis at 40.00 mm, and adjusted the view; left the block selected and positioned to the right of the row.", "intent": "Fine-tune the block\u2019s position along the blue axis.", "app": "SketchUp 2024", "details": "The on-screen inference label read \u201cOn Blue Axis 40.00 mm.\u201d"}, {"start_s": 30095.197, "end_s": 30101.765, "action": "Clicked to finish the move, then zoomed and orbited out to review the resulting placement; left the block unselected to the right of the repeated blocks.", "intent": "Finalize and review the block placement in the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 30101.765, "end_s": 30111.771, "action": "Scrolled and orbited the SketchUp view, then clicked the middle mouse button to adjust the camera around the modeled objects.", "intent": "Navigate and inspect the 3D model.", "app": "SketchUp 2024", "details": "The view remained focused on an escalator-like structure, grouped rectangular blocks, and a larger rectangular prism."}, {"start_s": 30111.771, "end_s": 30122.319, "action": "Continued orbiting and scrolling the 3D view around the model, then pressed a key while the camera remained focused on the rectangular objects.", "intent": "Reposition the camera for inspection.", "app": "SketchUp 2024", "details": "The view shifted closer to the escalator and rows of rectangular blocks."}, {"start_s": 30122.319, "end_s": 30131.941, "action": "Clicked in the modeling area, entered a space, and continued orbiting and scrolling; the view revealed a smaller rectangular prism beside the larger one.", "intent": "Create or inspect geometry near the existing rectangular objects.", "app": "SketchUp 2024", "details": "A drawing-tool cursor and dimension readout appeared briefly near the red axis."}, {"start_s": 30131.941, "end_s": 30137.274, "action": "Repeatedly clicked the smaller rectangular prism, right-clicked it, and then clicked the upper toolbar area; the prism became selected with a blue outline.", "intent": "Select and possibly inspect the smaller rectangular object.", "app": "SketchUp 2024", "details": "The smaller prism was visibly selected at the end of the span."}, {"start_s": 30137.274, "end_s": 30157.274, "action": "Paused with the smaller rectangular prism selected in the SketchUp modeling view.", "intent": "Review the current model selection.", "app": "SketchUp 2024", "details": "No interactions were recorded during this interval."}, {"start_s": 30157.274, "end_s": 30173.748, "action": "Scrolled once, slightly changing the camera view while keeping the smaller rectangular prism selected.", "intent": "Adjust the view for continued inspection.", "app": "SketchUp 2024", "details": "The selected prism and adjacent larger prism remained visible."}, {"start_s": 30173.748, "end_s": 30181.108, "action": "Scrolled and middle-clicked in the SketchUp viewport, changing the camera view around the selected rectangular face and nearby blocks.", "intent": "Adjust the 3D view and inspect the model.", "app": "SketchUp 2024", "details": null}, {"start_s": 30181.108, "end_s": 30201.108, "action": "Remained inactive while the SketchUp model stayed visible in the viewport.", "intent": "Pause or review the current model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 30201.108, "end_s": 30211.309, "action": "Resized and moved a Windows Explorer window, briefly unhid it, then clicked and scrolled in SketchUp to adjust the viewport around the selected rectangular face.", "intent": "Manage the overlapping window and refine the model view.", "app": "SketchUp 2024", "details": null}, {"start_s": 30211.309, "end_s": 30220.412, "action": "Changed the SketchUp view so the rectangular face appeared larger, then selected it and activated the Rotate tool; typed a character and clicked near the face.", "intent": "Prepare the rectangular face for rotation.", "app": "SketchUp 2024", "details": null}, {"start_s": 30220.412, "end_s": 30240.412, "action": "Clicked to set the rotation center and rotated the selected rectangular face, with the on-screen angle readout progressing to 56.4 degrees.", "intent": "Rotate the selected rectangular face to a new orientation.", "app": "SketchUp 2024", "details": "Rotation remained active at the end of the span."}, {"start_s": 30240.412, "end_s": 30250.748, "action": "Resized and moved a Windows Explorer window, entered 45, and pressed Enter; SketchUp completed the rotation and left the rectangular face angled beside the larger block.", "intent": "Set the rotation angle numerically and finalize the face orientation.", "app": "SketchUp 2024", "details": "The final visible angle readout was 45.0."}, {"start_s": 30250.748, "end_s": 30260.469, "action": "Orbit and zoom the SketchUp view around the modeled rectangular solids, then switch to the Select tool and reposition the view.", "intent": "Inspect the model from a closer angle.", "app": "SketchUp 2024", "details": null}, {"start_s": 30260.469, "end_s": 30269.964, "action": "Select the central rectangular solid, zoom in, and leave its face highlighted with a selection bounding box.", "intent": "Prepare the solid for editing.", "app": "SketchUp 2024", "details": "The selected face is shown with blue edges and a dotted bounding box."}, {"start_s": 30269.964, "end_s": 30281.843, "action": "Activate the Line tool and draw a diagonal line across the lower portion of the selected face, creating a triangular subdivision.", "intent": "Divide the solid\u2019s face with construction geometry.", "app": "SketchUp 2024", "details": "The line is drawn from the lower edge toward the right side of the face."}, {"start_s": 30281.843, "end_s": 30293.328, "action": "Continue drawing lines on the selected face, adding a diagonal subdivision on the opposite lower side and adjusting the view while entering tool inputs.", "intent": "Create additional face divisions.", "app": "SketchUp 2024", "details": "The face displays triangular lower regions and a central vertex."}, {"start_s": 30293.328, "end_s": 30302.222, "action": "Draw a vertical line down the face and begin another line from the left edge, leaving the subdivided face selected.", "intent": "Refine the face geometry into additional sections.", "app": "SketchUp 2024", "details": "The face now includes a central vertical edge and diagonal lower boundaries."}, {"start_s": 30302.222, "end_s": 30309.414, "action": "Activate the Arc tool and create a curved arc from the left-side point toward the upper central area of the subdivided face.", "intent": "Add curved geometry to the modeled face.", "app": "SketchUp 2024", "details": "The arc preview becomes a visible curve across the upper-left portion of the face."}, {"start_s": 30309.414, "end_s": 30319.358, "action": "Canceled the active drawing operation with Escape, then clicked the left side of the outlined shape to begin another point.", "intent": "Continue editing the shape geometry.", "app": "SketchUp 2024", "details": null}, {"start_s": 30319.358, "end_s": 30331.118, "action": "Clicked within the upper center of the shape, canceled once, and clicked the left-side point again; began positioning a curved segment, with tangent inference appearing before the window moved or resized.", "intent": "Construct a curved edge using inferred tangent alignment.", "app": "SketchUp 2024", "details": "The curve tool remained active and displayed a tangent-at-vertex inference."}, {"start_s": 30331.118, "end_s": 30338.926, "action": "Clicked to set the curve endpoint and then clicked again to adjust its bulge, creating a curved arc from the left-side point toward the right side of the shape.", "intent": "Complete the first curved portion of the design.", "app": "SketchUp 2024", "details": "A semicircular arc became visible across the upper-left portion of the shape."}, {"start_s": 30338.926, "end_s": 30350.704, "action": "Clicked the right-side point, adjusted the curve, and used the active curve tool to create a matching arc on the upper-right; then pressed Space to switch to selection and scrolled the view.", "intent": "Create the second side of the curved design and inspect the result.", "app": "SketchUp 2024", "details": "The two arcs formed a heart-like outline inside the rectangular face."}, {"start_s": 30350.704, "end_s": 30361.197, "action": "Selected and adjusted geometry around the center and lower-right area, then clicked the lower-right triangular face; the view zoomed in and the final outline showed a continuous heart shape with surrounding triangular regions.", "intent": "Refine and inspect the heart-shaped geometry.", "app": "SketchUp 2024", "details": "The lower-right face was highlighted with stippled selection shading."}, {"start_s": 30361.197, "end_s": 30371.4, "action": "Used cut, undo, and clipboard-related shortcuts while clicking the upper and lower-right faces; selection shading shifted between the upper background face and the lower-right triangular face.", "intent": "Modify or review selected faces in the model.", "app": "SketchUp 2024", "details": "The heart-shaped central face remained visible while adjacent faces were selected at different points."}, {"start_s": 30371.4, "end_s": 30382.142, "action": "Selected and manipulated the rectangular object around the heart-shaped model, then clicked within the scene.", "intent": "Adjust the selected model geometry or selection state.", "app": "SketchUp 2024", "details": "The heart-shaped face remained visible inside the selected rectangular bounds."}, {"start_s": 30382.142, "end_s": 30392.322, "action": "Clicked around the lower edges of the selected geometry and completed the interaction, leaving the rectangular outline deselected while the heart remained visible.", "intent": "Refine or finish the geometry selection.", "app": "SketchUp 2024", "details": "The final view showed the heart-shaped face without the blue rectangular selection outline."}, {"start_s": 30392.322, "end_s": 30401.342, "action": "Changed the camera view using orbit, zoom, and pan interactions, moving from a close view of the heart to a wider angled view of the scene.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2024", "details": "The heart and adjacent rectangular object became smaller and shifted in the viewport."}, {"start_s": 30401.342, "end_s": 30410.808, "action": "Continued orbiting and zooming around the model, bringing the view very close to the heart-shaped face and its side edge.", "intent": "Examine the heart geometry and surrounding model closely.", "app": "SketchUp 2024", "details": "The viewport ended in an extreme close-up of the heart's edge."}, {"start_s": 30410.808, "end_s": 30420.47, "action": "Zoomed and orbited out substantially, revealing the heart, a rectangular block, and a row of repeated block-like objects in the wider scene.", "intent": "Review the heart in relation to the surrounding modeled objects.", "app": "SketchUp 2024", "details": "The camera moved from the close-up to a broad perspective view."}, {"start_s": 30420.47, "end_s": 30430.175, "action": "Continued zooming and orbiting out to reveal a much larger portion of the SketchUp scene, including stairs, an escalator-like structure, repeated blocks, a rectangular block, and the heart.", "intent": "Inspect the overall model layout.", "app": "SketchUp 2024", "details": "The final view showed the heart as a small object among multiple larger modeled structures."}, {"start_s": 30430.175, "end_s": 30440.342, "action": "Navigated around the SketchUp model with middle-button view controls and repeated scrolling, changing from a closer view of several objects to a distant view near the axes.", "intent": "Adjust the 3D camera to inspect the model.", "app": "SketchUp", "details": null}, {"start_s": 30440.342, "end_s": 30450.294, "action": "Scrolled and orbited the SketchUp scene, bringing the small room, escalator-like structure, repeated vertical elements, and rectangular block into a closer oblique view.", "intent": "Reposition the camera for model inspection.", "app": "SketchUp", "details": null}, {"start_s": 30450.294, "end_s": 30460.08, "action": "Orbited and adjusted the view around the model, then switched to a drawing tool and typed R; the camera moved closer to the repeated elements and rectangular block.", "intent": "Inspect the model and begin a drawing-related operation.", "app": "SketchUp", "details": "The drawing tool remained active at the end of the span."}, {"start_s": 30460.08, "end_s": 30469.798, "action": "Clicked around the rectangular block and adjacent area, typed a space and P, and manipulated a selected face with the Push/Pull tool, producing a small raised rectangular extrusion.", "intent": "Modify the small rectangular geometry.", "app": "SketchUp", "details": "The selected face and Push/Pull distance readout were visible."}, {"start_s": 30469.798, "end_s": 30479.622, "action": "Kept the small extruded face selected, typed a space, then began dragging across the face with the active Push/Pull tool.", "intent": "Continue adjusting the rectangular extrusion.", "app": "SketchUp", "details": "The drag continued through the end of the span."}, {"start_s": 30479.622, "end_s": 30489.63, "action": "Completed the geometry manipulation, clicked and scrolled to reposition the camera toward the larger rectangular block, then selected an upper edge or face area for further editing.", "intent": "Inspect and prepare the larger block for another modeling operation.", "app": "SketchUp", "details": "The final view was zoomed closely on the block with a blue-highlighted top edge."}, {"start_s": 30489.63, "end_s": 30500.648, "action": "Adjusted the view around the tall rectangular model and continued the edge-offset operation, leaving an edge selected for offset.", "intent": "Refine the model geometry using the edge offset tool.", "app": "SketchUp 2024", "details": "Edge offset tool remained active; the model showed a selected edge and an offset value field."}, {"start_s": 30500.648, "end_s": 30510.966, "action": "Orbited around the model, selected its upper edges, and applied a bevel operation, rounding the top-right corner and changing the straight block into a rounded form.", "intent": "Round the model's sharp edges with the bevel tool.", "app": "SketchUp 2024", "details": "The status bar showed bevel-related prompts and the geometry visibly changed to a rounded top corner."}, {"start_s": 30510.966, "end_s": 30519.742, "action": "Zoomed and orbited around the rounded block, then selected its top edge/face for further editing.", "intent": "Inspect and prepare the rounded geometry for additional modification.", "app": "SketchUp 2024", "details": "The model was viewed from multiple angles with the top edge highlighted."}, {"start_s": 30519.742, "end_s": 30530.518, "action": "Selected the rounded object, orbited and zoomed out, and left the object highlighted while bringing the surrounding model into view.", "intent": "Review the edited component in relation to the larger scene.", "app": "SketchUp 2024", "details": "The rounded component remained selected in a wider scene view containing other modeled structures."}, {"start_s": 30530.518, "end_s": 30541.902, "action": "Selected an edge on the rounded component and performed another edge-offset adjustment, increasing the displayed offset value and altering the corner profile.", "intent": "Further refine the rounded component's edge geometry.", "app": "SketchUp 2024", "details": "The edge-offset tool was active; the selected edge and green outline indicated the edited component."}, {"start_s": 30541.902, "end_s": 30551.757, "action": "Deselected the component, orbited and zoomed the camera, and reviewed the rounded object alongside the larger modeled assembly.", "intent": "Inspect the final shape and its placement in the scene.", "app": "SketchUp 2024", "details": "The final view showed the rounded standalone component and the surrounding escalator-like assembly from wider angles."}, {"start_s": 30551.757, "end_s": 30560.91, "action": "Scrolled and orbited/zoomed around the selected rounded rectangular model, then clicked near its lower edge and activated the offset tool.", "intent": "Inspect and modify the selected model geometry.", "app": "SketchUp 2024", "details": "The selected rounded rectangular solid remained visible while the view moved from a distant scene view to a close-up."}, {"start_s": 30560.91, "end_s": 30575.5, "action": "Clicked and orbited around the selected rounded rectangular solid, changing the camera to inspect its front and side faces.", "intent": "Review the model from different viewpoints.", "app": "SketchUp 2024", "details": "The solid stayed selected in a close-up SketchUp view."}, {"start_s": 30575.5, "end_s": 30586.727, "action": "Switched away and back to the SketchUp window, then scrolled and orbited to adjust the view around the rounded solid.", "intent": "Continue inspecting the model geometry.", "app": "SketchUp 2024", "details": "The model remained selected; the view alternated between close and wider framing."}, {"start_s": 30586.727, "end_s": 30597.061, "action": "Scrolled and orbited repeatedly, zooming out to reveal the rounded solid alongside the adjacent row of rectangular blocks and other scene geometry.", "intent": "Compare the edited object with surrounding scene elements.", "app": "SketchUp 2024", "details": "The final view showed the rounded solid separated from the larger modeled scene."}, {"start_s": 30597.061, "end_s": 30614.794, "action": "Scrolled and orbited through several viewpoints, selected the rounded solid, and zoomed out to a broad scene view before switching windows.", "intent": "Inspect the object and its placement within the scene.", "app": "SketchUp 2024", "details": "The final SketchUp view showed the house, stairs, escalator, and rows of blocks; a window switch began at the boundary."}, {"start_s": 30614.794, "end_s": 30624.32, "action": "Scrolled across the scene to a close view of the row of rectangular blocks, then resized and moved a Windows Explorer window at the end of the span.", "intent": "Navigate the model view and adjust the overlapping window layout.", "app": "SketchUp 2024", "details": "The SketchUp canvas ended focused on the block row; Explorer window resize and move events occurred near the end."}, {"start_s": 30624.32, "end_s": 30629.319, "action": "Observed network changes, then resized and moved a narrow Windows Explorer window while SketchUp remained visible.", "intent": "Adjust the desktop window layout.", "app": "SketchUp 2024", "details": "Network-change events occurred; no model edit was visible."}, {"start_s": 30629.319, "end_s": 30643.648, "action": "Scrolled repeatedly in the SketchUp viewport, changing the zoom to reveal more of the escalator and rows of repeated rectangular components.", "intent": "Review the 3D model from a wider view.", "app": "SketchUp 2024", "details": "The viewport progressively showed more surrounding geometry."}, {"start_s": 30643.648, "end_s": 30653.661, "action": "Middle-clicked and scrolled repeatedly in the viewport, navigating around the escalator and repeated rectangular components and ending on a more zoomed-out view.", "intent": "Inspect the model from different viewport positions.", "app": "SketchUp 2024", "details": "No geometry changes were visibly confirmed."}, {"start_s": 30653.661, "end_s": 30671.634, "action": "Continued middle-click and scroll navigation, opened the Extensions menu, and hovered over the Views entry before resizing the SketchUp window.", "intent": "Navigate the SketchUp interface and adjust the workspace.", "app": "SketchUp 2024", "details": "The Extensions menu displayed installed tool entries; no extension command was selected."}, {"start_s": 30671.634, "end_s": 30691.207, "action": "Switched between the SketchUp windows titled Sandbox and KITCHEN2, then dragged to move or resize the active window for most of the interval.", "intent": "Arrange or switch between SketchUp workspaces.", "app": "SketchUp 2024", "details": "The active model view remained visible while the window was manipulated."}, {"start_s": 30691.207, "end_s": 30703.115, "action": "Resized the SketchUp window, scrolled and middle-clicked in the viewport to adjust the model view, then switched to the Sandbox window.", "intent": "Reposition the viewport and switch SketchUp workspaces.", "app": "SketchUp 2024", "details": "The Sandbox toolbar was visible, and the final view showed the escalator and repeated rectangular components at a closer scale."}, {"start_s": 30703.115, "end_s": 30712.812, "action": "Activated the Sandbox terrain tool, navigated the model view with scrolling, and then canceled the active operation before switching focus to the Sandbox window.", "intent": "Prepare and inspect the Sandbox terrain tool.", "app": "SketchUp 2024", "details": "The model shows existing repeated rectangular solids; the Sandbox toolbar is visible."}, {"start_s": 30712.812, "end_s": 30721.797, "action": "Selected the Sandbox terrain tool, clicked two points to define the first and second corners, and left the tool ready for the third corner.", "intent": "Begin defining a Sandbox terrain grid.", "app": "SketchUp 2024", "details": "The Measurements box showed Grid Spacing 3000.00 mm, then a length of approximately 2353.94 mm."}, {"start_s": 30721.797, "end_s": 30731.216, "action": "Clicked to define the next Sandbox corner, adjusted the view with middle-button navigation and scrolling, and canceled the operation.", "intent": "Continue positioning the Sandbox grid while inspecting the model.", "app": "SketchUp 2024", "details": "The view changed to reveal a longer row of repeated solids and another partial structure."}, {"start_s": 30731.216, "end_s": 30742.189, "action": "Clicked successive points to define another Sandbox grid, creating a dotted rectangular grid area to the right of the existing solids.", "intent": "Create a new Sandbox terrain grid beside the model.", "app": "SketchUp 2024", "details": "The Measurements box displayed lengths around 3937.56 mm and 3565.35 mm while the tool prompted for the third corner."}, {"start_s": 30742.189, "end_s": 30751.845, "action": "Navigated and zoomed the view, completed the Sandbox operation, selected the resulting blue six-cell surface, and opened its context menu.", "intent": "Inspect and manipulate the newly created terrain surface.", "app": "SketchUp 2024", "details": "The selected surface appears as a blue rectangular 2-by-3 grid; the context menu is open with options including Erase, Hide, Explode, and Intersect Faces."}, {"start_s": 30751.845, "end_s": 30766.515, "action": "Dismissed the context menu, opened the View menu, and moved to the display options around Hidden Objects while the terrain surface remained selected; then hid the SketchUp window.", "intent": "Review visibility and display settings for the selected terrain surface.", "app": "SketchUp 2024", "details": "The View menu shows display options including Hidden Geometry and Hidden Objects; the application was hidden near the end of the span."}, {"start_s": 30766.515, "end_s": 30777.205, "action": "Switched to the SketchUp KITCHEN2 model, activated the Smoove tool, and clicked around the triangulated rectangular mesh and nearby geometry.", "intent": "Modify or inspect the mesh using the Smoove terrain-editing tool.", "app": "SketchUp", "details": "The mesh remained visibly flat; the Smoove radius field showed 10000.00 mm."}, {"start_s": 30777.205, "end_s": 30792.884, "action": "Clicked several mesh faces and nearby geometry, briefly pressed Space and Escape, then selected the rectangular mesh with the terrain tool.", "intent": "Select the mesh and prepare it for terrain editing.", "app": "SketchUp", "details": "The mesh was highlighted blue by the end of the span, and the status bar identified the Loft or depress faces terrain tool."}, {"start_s": 30792.884, "end_s": 30809.155, "action": "Returned to the KITCHEN2 model, dragged across the mesh, pressed Escape, and clicked faces and edges while switching between selection and terrain-editing interactions.", "intent": "Refine the mesh selection and attempt a terrain edit.", "app": "SketchUp", "details": "The mesh was visibly selected blue at an intermediate point, then returned to its normal shaded appearance."}, {"start_s": 30809.155, "end_s": 30816.088, "action": "Used scroll-wheel bursts to zoom out and orbit the SketchUp view around the selected mesh.", "intent": "Adjust the camera to inspect the mesh and surrounding model.", "app": "SketchUp", "details": "The view zoomed out, revealing escalator-like and repeated rectangular geometry to the left."}, {"start_s": 30816.088, "end_s": 30824.375, "action": "Entered 300MM and confirmed the value while the Smoove tool remained active.", "intent": "Set a numeric Smoove distance or offset for the mesh edit.", "app": "SketchUp", "details": "The view remained zoomed out and the Smoove radius field displayed 3."}, {"start_s": 30824.375, "end_s": 30834.389, "action": "Entered 1000 followed by MM and confirmed it, then scrolled and clicked the mesh to apply the Smoove operation.", "intent": "Apply a larger numeric Smoove adjustment to the terrain mesh.", "app": "SketchUp", "details": "The mesh changed shape, with a raised or lowered central-left section and yellow Smoove handles visible; the status bar showed an offset of approximately -1524.42 mm."}, {"start_s": 30834.389, "end_s": 30844.941, "action": "Adjusted the selected terrain mesh with the Smoove tool, moving the highlighted points and changing the displayed offset from about 614.68 mm to about -595.71 mm.", "intent": "Shape the terrain surface by smoothing or repositioning selected mesh points.", "app": "SketchUp 2024", "details": "Terrain mesh remained selected inside its bounding box."}, {"start_s": 30844.941, "end_s": 30854.357, "action": "Clicked successive points on the terrain mesh to continue the Smoove adjustment, producing a more uneven surface with multiple raised and lowered sections.", "intent": "Refine the terrain mesh contour across additional vertices.", "app": "SketchUp 2024", "details": "The Smoove tool remained active and the offset read approximately -510.57 mm to -585.70 mm."}, {"start_s": 30854.357, "end_s": 30864.421, "action": "Adjusted additional mesh points, then orbited the camera to inspect the terrain from a different angle and zoom level.", "intent": "Continue shaping the mesh and review the resulting form in 3D.", "app": "SketchUp 2024", "details": "The mesh became visibly faceted and irregular; the tool prompt requested a Smoove base point."}, {"start_s": 30864.421, "end_s": 30874.428, "action": "Orbited and zoomed the SketchUp view around the terrain mesh, then clicked the mesh to set or inspect another Smoove point.", "intent": "Reposition the viewpoint and prepare another terrain adjustment.", "app": "SketchUp 2024", "details": "The view shifted to show more surrounding modeled objects while the terrain remained in its bounding box."}, {"start_s": 30874.428, "end_s": 30884.525, "action": "Clicked across the terrain mesh and adjusted a central area with the Smoove tool, leaving highlighted points and a localized surface modification.", "intent": "Modify the central terrain area while preserving the overall mesh layout.", "app": "SketchUp 2024", "details": "A central triangular region was highlighted during the adjustment; the offset changed to approximately -47.15 mm."}, {"start_s": 30884.525, "end_s": 30892.967, "action": "Zoomed and orbited outward around the model, changing the view from a close terrain inspection to a wider scene showing the escalator-like and block structures beside the mesh.", "intent": "Inspect the edited terrain in relation to the surrounding model.", "app": "SketchUp 2024", "details": "The Smoove tool remained active and the terrain mesh stayed visible within its bounding box."}, {"start_s": 30892.967, "end_s": 30901.415, "action": "Scrolled the SketchUp viewport several times while the Smoove tool remained active over the triangulated mesh.", "intent": "Adjust the view while preparing or inspecting the mesh for editing.", "app": "SketchUp 2024", "details": "The viewport zoomed out to show more of the mesh and nearby block geometry; no geometry change is evident."}, {"start_s": 30901.415, "end_s": 30911.534, "action": "Scrolled the viewport, then clicked the lower-right mesh face twice to select it with the Smoove tool.", "intent": "Select a mesh region for a Smoove operation.", "app": "SketchUp 2024", "details": "The selected mesh region displayed yellow handles and an Offset value of approximately -481.55 mm."}, {"start_s": 30911.534, "end_s": 30925.042, "action": "Clicked the selected mesh and adjusted the view, then pressed Space to return to the Select tool and clicked the upper-right mesh face.", "intent": "Finish the current mesh operation and inspect another face.", "app": "SketchUp 2024", "details": "The mesh returned to an unselected state before the upper-right face became highlighted."}, {"start_s": 30925.042, "end_s": 30935.778, "action": "Selected mesh edges and clicked several locations across the mesh, flipping or inspecting diagonal edges with the active edge-flip tool.", "intent": "Modify the triangulation direction of mesh faces.", "app": "SketchUp 2024", "details": "A diagonal edge in the upper-right portion of the mesh became highlighted in blue; the status bar instructed selecting an edge on the mesh to flip."}, {"start_s": 30935.778, "end_s": 30946.669, "action": "Dragged and clicked multiple mesh faces and vertices, switching into the mesh-detail operation and positioning a new vertex offset.", "intent": "Add or position detail on the mesh surface.", "app": "SketchUp 2024", "details": "The mesh gained additional diagonal subdivisions, and the status bar showed an offset of approximately -219.75 mm."}, {"start_s": 30946.669, "end_s": 30961.363, "action": "Clicked multiple mesh regions to add and offset further detail, creating several new triangular subdivisions and raised or lowered facets, then switched to the recorder window.", "intent": "Refine the mesh topology and surface form before moving to another application.", "app": "SketchUp 2024", "details": "The mesh visibly became more densely triangulated and uneven; the final click triggered an app switch to the recorder."}, {"start_s": 30961.363, "end_s": 30976.707, "action": "Adjusted the SketchUp view around the triangulated blue mesh with scroll gestures, zooming out to reveal more surrounding model geometry, then clicked the mesh area.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2024", "details": "The mesh remained visible beside repeated block-like geometry and an escalator model."}, {"start_s": 30976.707, "end_s": 30986.482, "action": "Rotated and adjusted the camera around the triangulated mesh using middle-button navigation and clicked several mesh locations, changing from a low oblique view to a more frontal view.", "intent": "Examine the mesh from different angles.", "app": "SketchUp 2024", "details": "The mesh stayed selected for mesh-detail work; no definite geometry change is visible."}, {"start_s": 30986.482, "end_s": 30995.65, "action": "Clicked around the mesh and navigated the camera with middle-button movements and scrolling, ending on an angled view that shows the mesh surface and surrounding blocks.", "intent": "Continue inspecting the mesh surface and positioning the view.", "app": "SketchUp 2024", "details": "The triangulated blue surface remained the central object."}, {"start_s": 30995.65, "end_s": 31005.617, "action": "Adjusted the camera with repeated scroll gestures and clicked mesh locations, leaving the view centered on the triangulated surface from a slightly elevated angle.", "intent": "Refine the inspection view of the mesh.", "app": "SketchUp 2024", "details": "The status bar indicates mesh-detail interaction; the final click appears to engage vertex offsetting."}, {"start_s": 31005.617, "end_s": 31019.773, "action": "Clicked and navigated around the mesh, entered brief space-key inputs, and then changed to the Select tool; zoomed out to show the broader scene and selected the mesh object before the window was hidden and resized.", "intent": "Finish mesh inspection and select the overall object in the scene.", "app": "SketchUp 2024", "details": "The final screenshot shows the complete triangulated mesh outlined in blue."}, {"start_s": 31019.773, "end_s": 31028.69, "action": "Returned to SketchUp, opened the Default Tray with Entity Info and Materials, dragged across the selected mesh, and adjusted the tray control; the mesh changed from a blue selection outline to an unselected shaded surface while the Materials panel remained open.", "intent": "Inspect object properties and material settings for the mesh.", "app": "SketchUp 2024", "details": "The Materials panel visibly shows the material name 'Tile Limestone Multi' and tile swatches."}, {"start_s": 31028.69, "end_s": 31038.954, "action": "Scrolled and orbited the SketchUp view, then selected the triangulated irregular object with a drag.", "intent": "Inspect and select the modeled object.", "app": "SketchUp 2024", "details": "The irregular triangulated object became highlighted in blue."}, {"start_s": 31038.954, "end_s": 31049.273, "action": "Resized and hid the side panels, then zoomed and orbited the model to view the scene from farther away.", "intent": "Adjust the workspace and inspect the overall model layout.", "app": "SketchUp 2024", "details": "The view changed from a close-up to a distant overview of the modeled objects."}, {"start_s": 31049.273, "end_s": 31059.066, "action": "Continued zooming and orbiting around the model, bringing the grouped objects closer into view.", "intent": "Refine the viewing angle and scale for inspection.", "app": "SketchUp 2024", "details": "The model cluster grew larger and shifted within the viewport."}, {"start_s": 31059.066, "end_s": 31070.5, "action": "Entered the rectangle tool and drew a large rectangular face on the ground plane to the right of the existing objects.", "intent": "Create a new rectangular base or surface.", "app": "SketchUp 2024", "details": "A purple-outlined rectangle appeared with dimensions shown in the Measurements box."}, {"start_s": 31070.5, "end_s": 31080.49, "action": "Selected the new rectangle and used Push/Pull to extrude it into a rectangular block, then adjusted the view around it.", "intent": "Turn the drawn rectangle into a 3D block.", "app": "SketchUp 2024", "details": "The rectangle became a solid box with a selected stippled top face."}, {"start_s": 31080.49, "end_s": 31090.132, "action": "Selected the rectangular block, then orbited and zoomed the camera to inspect it alongside the other modeled objects.", "intent": "Review the new block in the scene.", "app": "SketchUp 2024", "details": "The block was shown selected initially and then viewed from an angled perspective with the surrounding objects."}, {"start_s": 31090.132, "end_s": 31099.506, "action": "Selected the front face repeatedly, then activated the edge-offset tool and positioned it along the right edge of the rectangular model.", "intent": "Prepare the model face and edge for an offset operation.", "app": "SketchUp 2024", "details": "The front face was initially stippled as selected; the edge-offset tool cursor and status prompt appeared by the end."}, {"start_s": 31099.506, "end_s": 31108.851, "action": "Defined an edge offset on the model, entered an offset value of 900.00 mm, and continued adjusting the offset selection until a rounded end profile with segmented edges appeared.", "intent": "Create a rounded or beveled end detail on the model.", "app": "SketchUp 2024", "details": "The resulting top perimeter was highlighted green and the status bar showed edge-offset controls."}, {"start_s": 31108.851, "end_s": 31126.333, "action": "Reviewed the edited component in SketchUp, then hid or minimized the application and left the desktop visible until the next application switch.", "intent": "Inspect the completed model and transition away from SketchUp.", "app": "SketchUp 2024", "details": "The view was zoomed out to show the edited rounded block alongside other geometry before the app became hidden."}, {"start_s": 31126.333, "end_s": 31136.442, "action": "Switched back to the SketchUp window, then navigated around the model with middle-button view movements and scrolls.", "intent": "Reposition the 3D view to inspect the model from different angles.", "app": "SketchUp 2024", "details": "The rounded rectangular block remained visible while the camera view shifted and zoom level changed."}, {"start_s": 31136.442, "end_s": 31147.026, "action": "Zoomed and orbited closer to the rounded block, then selected the model geometry with a left click.", "intent": "Inspect and select the edited object for further work.", "app": "SketchUp 2024", "details": "The camera moved from a wider scene view to a close-up; the final screenshot shows the block outlined in blue."}, {"start_s": 31147.026, "end_s": 31157.418, "action": "Adjusted the view around the selected block with scrolls and middle-button navigation, then clicked the geometry repeatedly and ended with the selection cleared or changed.", "intent": "Refine the inspection view and review the edited geometry.", "app": "SketchUp 2024", "details": "The final view shows the rounded block from an elevated angle with its bounding guides visible."}, {"start_s": 31157.418, "end_s": 31167.34, "action": "Adjusted the SketchUp view and window, clicked around the rounded rectangular model, and used scrolling and a space-key input while the edge-offset tool remained active; the view ended showing the model beside a row of repeated blocks.", "intent": "Refine the model view and work on an edge offset.", "app": "SketchUp", "details": "Rounded rectangular solid and repeated block geometry remained visible."}, {"start_s": 31167.34, "end_s": 31177.21, "action": "Orbited and zoomed the SketchUp scene around the rounded solid and adjacent repeated forms, then clicked the solid several times.", "intent": "Inspect the model from different angles.", "app": "SketchUp", "details": "The camera moved from a close view to an elevated view along the row of geometry."}, {"start_s": 31177.21, "end_s": 31187.25, "action": "Clicked the rounded solid and adjusted the view, then activated the edge-offset tool on a selected edge; the edge highlighted and a numeric offset value appeared in the status area.", "intent": "Apply or prepare an edge offset on the rounded solid.", "app": "SketchUp", "details": "The selected perimeter edge was highlighted in orange."}, {"start_s": 31187.25, "end_s": 31198.442, "action": "Zoomed and repositioned the view, clicked model edges, and continued the edge-offset operation; the view ended zoomed out with the rounded solid selected and surrounding scene geometry visible.", "intent": "Continue shaping the rounded solid with the offset tool.", "app": "SketchUp", "details": "The status bar showed edge-offset guidance and a changing offset value."}, {"start_s": 31198.442, "end_s": 31212.784, "action": "Navigated extensively around the SketchUp scene with orbiting, scrolling, and clicks, then switched to a wider view showing multiple modeled objects and selected a Sandbox toolbar tool.", "intent": "Review the overall model and choose a terrain/Sandbox operation.", "app": "SketchUp", "details": "The final view showed an escalator-like object, repeated blocks, and the rounded solid."}, {"start_s": 31212.784, "end_s": 31221.474, "action": "Returned focus to SketchUp, clicked the Sandbox toolbar, and began defining a Sandbox grid by selecting a first corner and then a second corner; a green guide line and grid-spacing/length fields appeared.", "intent": "Start creating a Sandbox terrain grid.", "app": "SketchUp", "details": "The Sandbox tool prompted for the first and second corners; the displayed grid spacing was 3000.00 mm."}, {"start_s": 31221.474, "end_s": 31233.9, "action": "Scrolled repeatedly to adjust the SketchUp camera view, bringing more of the modeled objects into view while keeping the Sandbox grid visible.", "intent": "Inspect the model layout from a wider view.", "app": "SketchUp", "details": null}, {"start_s": 31233.9, "end_s": 31239.708, "action": "Middle-clicked to orbit the scene and scrolled to reposition the camera, shifting the model and Sandbox grid across the viewport.", "intent": "Refine the 3D view for inspection.", "app": "SketchUp", "details": null}, {"start_s": 31239.708, "end_s": 31248.772, "action": "Scrolled extensively to zoom out and continued adjusting the camera, reducing the modeled objects to a smaller overall scene view.", "intent": "Obtain an overview of the complete model arrangement.", "app": "SketchUp", "details": null}, {"start_s": 31248.772, "end_s": 31260.491, "action": "Clicked and middle-dragged/orbited around the scene, then zoomed far out; the Sandbox grid became a blue triangulated terrain mesh and the tool state changed to selecting the first Sandbox corner.", "intent": "Start or inspect Sandbox terrain creation.", "app": "SketchUp", "details": "The visible prompt changed to selecting the first corner of the Sandbox, with grid spacing shown as 3000.00 mm."}, {"start_s": 31260.491, "end_s": 31269.29, "action": "Scrolled and adjusted the view around the blue triangulated mesh, clicked the Sandbox toolbar controls, and switched to a terrain-editing state that highlighted the mesh.", "intent": "Activate a Sandbox terrain editing operation.", "app": "SketchUp", "details": "The status bar indicated that faces could be lofted or depressed to shape a terrain mesh."}, {"start_s": 31269.29, "end_s": 31280.626, "action": "Returned focus to the SketchUp window, clicked the Sandbox smoove tool and the Edit menu, then left the application hidden with the Edit menu open.", "intent": "Continue terrain editing and access editing commands.", "app": "SketchUp", "details": "The status bar showed the Smoove tool with a 1000.00 mm radius before the window was hidden."}, {"start_s": 31280.626, "end_s": 31289.5, "action": "Opened the View menu, selected Hidden Geometry, then entered 2000 and confirmed it. The terrain mesh displayed additional hidden diagonal edges.", "intent": "Enable hidden geometry and set the tool value for subsequent terrain editing.", "app": "SketchUp 2024", "details": "The application was briefly hidden before the value entry."}, {"start_s": 31289.5, "end_s": 31298.562, "action": "Clicked several points on the terrain mesh to activate the Smoove tool and set a base point, leaving a circular tool radius of 2000.00 visible.", "intent": "Prepare a terrain region for Smoove editing.", "app": "SketchUp 2024", "details": "The status bar identified the Smoove tool and the radius field showed 2000.00."}, {"start_s": 31298.562, "end_s": 31308.666, "action": "Clicked multiple mesh points and moved the selected terrain vertices, creating a raised and lowered central contour across the surface.", "intent": "Sculpt the terrain mesh with the Smoove tool.", "app": "SketchUp 2024", "details": "Yellow handles and changing mesh elevations indicated an active Smoove edit."}, {"start_s": 31308.666, "end_s": 31318.642, "action": "Continued clicking across upper and central mesh areas and applying Smoove edits, extending the irregular raised and lowered terrain forms toward the right side.", "intent": "Continue shaping the terrain surface.", "app": "SketchUp 2024", "details": "The mesh developed additional stepped contours and the tool remained active."}, {"start_s": 31318.642, "end_s": 31327.762, "action": "Applied more Smoove edits at the right and lower-central portions of the mesh, producing further stepped elevations and depressions.", "intent": "Refine the terrain contour across additional mesh regions.", "app": "SketchUp 2024", "details": "The Smoove tool remained active with the radius shown as 2000.00."}, {"start_s": 31327.762, "end_s": 31337.802, "action": "Clicked the terrain, scrolled to zoom out and reposition the view, then clicked another mesh area and continued Smoove editing.", "intent": "Inspect the broader terrain and continue shaping it.", "app": "SketchUp 2024", "details": "The view first zoomed out to show surrounding objects, then zoomed back toward the terrain; the radius field remained 2000.00."}, {"start_s": 31337.802, "end_s": 31355.591, "action": "Scrolled and middle-clicked around the triangulated terrain, then clicked several points and zoomed far out to view the mesh with surrounding model elements.", "intent": "Inspect and adjust the SketchUp terrain view.", "app": "SketchUp 2024", "details": "Displayed a blue triangulated terrain mesh with Sandbox tools visible."}, {"start_s": 31355.591, "end_s": 31366.186, "action": "Continued orbiting and zooming around the triangulated terrain, clicked the mesh and toolbar area, and changed to a closer view of its surface.", "intent": "Examine the terrain mesh from different viewpoints.", "app": "SketchUp 2024", "details": "A recorder window transition occurred at the boundary; SketchUp remained visibly active."}, {"start_s": 31366.186, "end_s": 31376.689, "action": "Zoomed far out to show the full scene, then orbited and zoomed back toward the terrain and adjacent objects.", "intent": "Reframe the SketchUp scene and inspect the terrain in context.", "app": "SketchUp 2024", "details": "The terrain appeared alongside several surrounding modeled objects."}, {"start_s": 31376.689, "end_s": 31385.435, "action": "Continued orbiting and zooming around the terrain, settling on a closer oblique view of its stepped triangular surface.", "intent": "Review the terrain geometry from another angle.", "app": "SketchUp 2024", "details": "The terrain mesh occupied the right side of the viewport beside stairs and other objects."}, {"start_s": 31385.435, "end_s": 31395.147, "action": "Zoomed out and orbited repeatedly, reducing the terrain and surrounding objects to a wider scene view.", "intent": "Inspect the overall model layout.", "app": "SketchUp 2024", "details": "No clear geometry edit was visible; navigation dominated the span."}, {"start_s": 31395.147, "end_s": 31412.7, "action": "Dragged extensively to orbit away from the terrain toward the architectural model, then clicked and adjusted the view until the small furnished room was isolated in the viewport.", "intent": "Navigate to and inspect another part of the SketchUp model.", "app": "SketchUp 2024", "details": "The final view showed a furnished room/platform with blue sky visible."}, {"start_s": 31412.7, "end_s": 31422.179, "action": "Navigated around the SketchUp model with middle-button view adjustments and scrolling, then typed \u201cR\u201d and clicked near the model.", "intent": "Inspect and adjust the 3D view.", "app": "SketchUp 2024", "details": "Displayed a small furnished room model."}, {"start_s": 31422.179, "end_s": 31432.131, "action": "Clicked repeatedly near the ground area, inserted a space, and used right-clicks before clicking the model toolbar area; a separate rectangular plane appeared beside the furnished room.", "intent": "Create or manipulate geometry beside the existing model.", "app": "SketchUp 2024", "details": "The view showed the furnished room and a new gray rectangular plane."}, {"start_s": 31432.131, "end_s": 31442.267, "action": "Selected the new geometry, typed \u201cP,\u201d and used the Push/Pull tool to extrude the plane into a box, then continued clicking and adjusting the view.", "intent": "Extrude the new plane into a 3D solid.", "app": "SketchUp 2024", "details": "A large selected rectangular block appeared beside the room."}, {"start_s": 31442.267, "end_s": 31455.013, "action": "Clicked the extruded block to continue editing it and scrolled to adjust the view while the block remained selected.", "intent": "Continue inspecting or editing the extruded solid.", "app": "SketchUp 2024", "details": "The block was shown as a plain rectangular solid next to the room."}, {"start_s": 31455.013, "end_s": 31471.533, "action": "Opened the tool area, selected edges or faces on the block, and applied an edge bevel; adjusted the view and left the block with a rounded front-right corner.", "intent": "Round or bevel the block\u2019s edges.", "app": "SketchUp 2024", "details": "The block\u2019s front-right edge became curved, with segmented bevel lines visible during editing."}, {"start_s": 31471.533, "end_s": 31481.571, "action": "Reoriented and zoomed the SketchUp camera around the beveled block, clicked its faces and edges, typed \u201cP,\u201d and continued close-up inspection.", "intent": "Inspect and refine the beveled solid.", "app": "SketchUp 2024", "details": "The final view closely framed the rounded-corner block, with the furnished room partly visible behind it."}, {"start_s": 31481.571, "end_s": 31492.652, "action": "Clicked and scrolled in SketchUp to adjust the view around the rounded rectangular 3D object while the edge-offset tool remained active.", "intent": "Refine the view or inspect the selected model edge.", "app": "SketchUp", "details": "The object stayed visible inside a dotted bounding box, with an edge highlighted and the status bar showing edge offset."}, {"start_s": 31492.652, "end_s": 31505.8, "action": "Scrolled extensively to zoom the SketchUp view out, then clicked around the model and left the object displayed very small in the scene.", "intent": "Reframe the model for broader scene inspection.", "app": "SketchUp", "details": "The view changed from a close-up of the rounded object to a distant view showing it near the kitchen model."}, {"start_s": 31505.8, "end_s": 31516.242, "action": "Switched away and back to SketchUp, then scrolled and clicked to reposition the camera, bringing the kitchen model and rounded object into a clearer side-by-side view.", "intent": "Inspect the relationship between the two modeled elements.", "app": "SketchUp", "details": "The active view showed a furnished kitchen unit on the left and a separate rounded rectangular object on the right."}, {"start_s": 31516.242, "end_s": 31529.062, "action": "Scrolled to zoom farther out, clicked in the workspace, and closed the floating Sandbox palette.", "intent": "Clear the workspace and adjust the scene framing.", "app": "SketchUp", "details": "The final view showed both models smaller, with the Sandbox palette no longer visible."}, {"start_s": 31529.062, "end_s": 31537.906, "action": "Switched between SketchUp windows and repeatedly scrolled to zoom in on the kitchen model.", "intent": "Focus inspection on the kitchen model.", "app": "SketchUp", "details": "The rounded object disappeared from view as the furnished kitchen became the centered subject."}, {"start_s": 31537.906, "end_s": 31555.5, "action": "Scrolled and middle-clicked repeatedly to zoom and orbit around the kitchen model, ending with a closer overhead perspective; then switched toward the recorder window.", "intent": "Inspect the kitchen layout from multiple viewpoints.", "app": "SketchUp", "details": "The final evidence showed the kitchen cabinetry, appliances, dining table, and chairs prominently, with a recorder window preview appearing at the end."}], "summary": "Developed and refined a detailed SketchUp kitchen and dining-room model by constructing cabinetry, walls, windows, appliances, fixtures, furnishings, materials, and interactive components, then inspected and presented the scene through saved views, styles, printing, and exports. Also experimented with architectural forms and SketchUp plugin tools such as arrays, stairs, escalators, terrain meshes, profiles, and rounded solids."}