{
  "schema_version": "1.0",
  "rubrics": [
    {
      "id": "R1",
      "requirement": "The model shall have an overall plan extent of approximately 5439.9 mm by 3846 mm."
    },
    {
      "id": "R2",
      "requirement": "The model shall have an overall height of approximately 2292.4 mm including the floor slab."
    },
    {
      "id": "R3",
      "requirement": "The model shall include a floor slab with walls along the back and right-hand sides only, leaving the front and left sides open."
    },
    {
      "id": "R4",
      "requirement": "The model shall include a door at the left end of the back wall."
    },
    {
      "id": "R5",
      "requirement": "The model shall include an L-shaped run of base cabinets with a continuous countertop along the back wall and the right wall."
    },
    {
      "id": "R6",
      "requirement": "The model shall include a double-bowl sink with a faucet set in the back countertop run."
    },
    {
      "id": "R7",
      "requirement": "The model shall include a two-pane window in the back wall located above the sink."
    },
    {
      "id": "R8",
      "requirement": "The model shall include a four-burner hob in the right-hand countertop run."
    },
    {
      "id": "R9",
      "requirement": "The model shall include a built-in oven in the base unit below the hob."
    },
    {
      "id": "R10",
      "requirement": "The model shall include vertical slatted backsplash panels behind the countertop on both sides of the window."
    },
    {
      "id": "R11",
      "requirement": "The model shall include upper or tall cabinets on the right wall above the counter level."
    },
    {
      "id": "R12",
      "requirement": "The model shall include a rectangular dining table with six chairs, two per long side and one at each end."
    },
    {
      "id": "R13",
      "requirement": "The model shall include six place settings on the dining table."
    },
    {
      "id": "R14",
      "requirement": "The model shall include a dish drying rack and a wall-mounted knife rail on the countertop zone."
    },
    {
      "id": "R15",
      "requirement": "The model shall use millimetres as its length units."
    },
    {
      "id": "R16",
      "requirement": "The model shall represent the cabinets, appliances and furniture as separate groups or components, with the six chairs as instances of a shared component definition."
    },
    {
      "id": "R17",
      "requirement": "The model shall organise its geometry using multiple tags."
    },
    {
      "id": "R18",
      "requirement": "The model shall apply materials to distinguish countertops, cabinet fronts, walls and floor."
    }
  ]
}