{"annotations": [{"start_s": 0.0, "end_s": 18.355, "action": "Viewed the SketchUp floor-plan model, scrolled through the canvas, and clicked near the right side before dismissing transient interactions.", "intent": "Inspect the existing architectural model.", "app": "SketchUp 2026", "details": "Two floor-plan drawings were visible; no clear geometry change was confirmed."}, {"start_s": 18.355, "end_s": 25.114, "action": "Switched through several Microsoft Edge tabs, including search, Gemini, and WhatsApp, then returned to the recorder window and SketchUp.", "intent": "Navigate between reference or communication pages and the design application.", "app": "Microsoft Edge / Screen recorder / SketchUp", "details": "WhatsApp appeared blank while loading; the recorder showed the active recording run."}, {"start_s": 25.114, "end_s": 38.317, "action": "Resized and repositioned SketchUp-related windows, clicked within the application, and switched back to SketchUp while the Trimble Scan Essentials EULA began loading.", "intent": "Prepare SketchUp and load the Scan Essentials licensing prompt.", "app": "SketchUp 2026", "details": "The application transitioned from a blank/loading view to a Trimble Scan Essentials EULA window."}, {"start_s": 38.317, "end_s": 44.175, "action": "Reviewed the Trimble Scan Essentials EULA and scrolled down through its text, then clicked near the dialog\u2019s upper area.", "intent": "Review or interact with the Scan Essentials license agreement.", "app": "SketchUp 2026", "details": "The EULA text was visible in a centered dialog over the floor plan."}, {"start_s": 44.175, "end_s": 50.996, "action": "Returned to the SketchUp model and displayed a prompt asking whether to install Scan Essentials for LayOut, leaving the confirmation dialog open until the next interaction.", "intent": "Respond to the Scan Essentials installation prompt.", "app": "SketchUp 2026", "details": "The prompt offered Yes and No buttons."}, {"start_s": 50.996, "end_s": 60.648, "action": "Clicked through the Scan Essentials installation prompt, then used the SketchUp canvas with scrolling, clicks, and view navigation; briefly activated a guide-related tool before returning to selection mode.", "intent": "Continue configuring the plugin and inspect the floor-plan model.", "app": "SketchUp 2026", "details": "The model view shifted and zoomed around the two floor plans; no definitive geometry edit was confirmed."}, {"start_s": 60.648, "end_s": 70.279, "action": "Scrolled around the SketchUp model, typed \u201cr,\u201d and clicked and dragged near the corner of a rectangular outline to continue a drawing operation.", "intent": "Continue editing the floor-plan geometry.", "app": "SketchUp 2026", "details": "A rectangular outline was being created or adjusted near the model corner."}, {"start_s": 70.279, "end_s": 80.095, "action": "Clicked around the small rectangular element, exited the active operation, and selected the resulting geometry while navigating the view.", "intent": "Inspect or select the newly created model element.", "app": "SketchUp 2026", "details": "The view changed from a close-up to a wider 3D view showing the small element at the edge of the floor plan."}, {"start_s": 80.095, "end_s": 89.296, "action": "Selected the small element, entered \u201c10',\u201d and pressed Enter to set its distance, then navigated and clicked away from the operation.", "intent": "Set a 10-foot extrusion or movement distance for the model element.", "app": "SketchUp 2026", "details": "SketchUp displayed Distance 10' while a small vertical element was being edited."}, {"start_s": 89.296, "end_s": 99.558, "action": "Orbited and zoomed around the SketchUp model using middle-button navigation, moving from the overall floor plans to close views of the walls and room outlines.", "intent": "Review the edited geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The view alternated between the sparse left floor plan and the detailed floor plan on the right."}, {"start_s": 99.558, "end_s": 108.424, "action": "Continued orbiting and zooming the 3D scene to inspect the sparse floor plan and its raised wall elements alongside the detailed reference plan.", "intent": "Examine the model layout and geometry.", "app": "SketchUp 2026", "details": "No new geometry or text input was visible; activity consisted of camera navigation."}, {"start_s": 108.424, "end_s": 118.4, "action": "Zoomed and orbited closer to the sparse floor plan, then rotated the view across its rooms, stair area, and raised wall segments.", "intent": "Inspect the floor-plan model from a closer angle.", "app": "SketchUp 2026", "details": "The final view focused on the upper rooms and surrounding wall outlines."}, {"start_s": 118.4, "end_s": 128.592, "action": "Navigated around the SketchUp model with repeated view adjustments and clicks, selected a narrow face, and activated Push/Pull; typed \u201cp\u201d and positioned the tool over the face.", "intent": "Prepare a wall face for modification.", "app": "SketchUp 2026", "details": "A narrow vertical face was selected and the Push/Pull tool showed a distance of about 6 inches."}, {"start_s": 128.592, "end_s": 139.251, "action": "Adjusted the camera, clicked and dragged on the selected narrow face, and used Push/Pull to modify its geometry; scrolled and reviewed the resulting model view.", "intent": "Extrude or adjust the selected wall section.", "app": "SketchUp 2026", "details": "The selected face remained highlighted, with the Push/Pull distance changing from about 6 inches to 0 inches."}, {"start_s": 139.251, "end_s": 147.998, "action": "Navigated around the model with camera adjustments, clicked the narrow face, and dragged with Push/Pull to change its depth while reviewing the surrounding corner.", "intent": "Continue shaping the wall or trim geometry.", "app": "SketchUp 2026", "details": "The view widened to show the floor and wall corner; the displayed Push/Pull distance reached about 7 1/8 inches."}, {"start_s": 147.998, "end_s": 159.6, "action": "Continued orbiting or panning around the model, clicked the selected face several times, and used Push/Pull interactions while inspecting the wall base and adjacent floor.", "intent": "Refine the wall geometry and inspect its placement.", "app": "SketchUp 2026", "details": "The selected narrow face remained visible while the camera moved closer to the lower corner; a distance of about 6 inches was shown after later adjustments."}, {"start_s": 159.6, "end_s": 169.695, "action": "Adjusted the view around the opposite side of the wall, clicked near the base and edge, and continued selecting or manipulating faces with Push/Pull while scrolling through the model.", "intent": "Continue editing the wall corner geometry.", "app": "SketchUp 2026", "details": "The camera moved from a side corner to a close-up of a large wall face and its bottom edge."}, {"start_s": 169.695, "end_s": 181.373, "action": "Navigated around the model, selected and dragged faces near the wall base, and continued Push/Pull edits while reviewing the resulting corner from different angles.", "intent": "Finalize or inspect the wall extrusion.", "app": "SketchUp 2026", "details": "The final view showed a narrow vertical wall face and adjacent dark side face at the floor corner, with Push/Pull active."}, {"start_s": 181.373, "end_s": 191.266, "action": "Scrolled and clicked around the model while using Push/Pull on a narrow wall face, changing the view from a wider room layout to a close-up of the wall edge.", "intent": "Adjust the wall geometry or inspect its extrusion closely.", "app": "SketchUp 2026", "details": "Push/Pull tool was active; the distance readout changed during the interaction."}, {"start_s": 191.266, "end_s": 202.699, "action": "Scrolled and orbited/zoomed around the model, moving between a distant overview of the room layout and a close view of the wall edge.", "intent": "Inspect the modeled wall and surrounding floor plan from different viewpoints.", "app": "SketchUp 2026", "details": "The model remained in the Push/Pull workflow."}, {"start_s": 202.699, "end_s": 214.564, "action": "Clicked the wall area and repeatedly scrolled to reposition the camera, alternating between close and wider views of the wall and floor plan.", "intent": "Continue inspecting or positioning the view around the wall geometry.", "app": "SketchUp 2026", "details": "No clearly visible new geometry was created."}, {"start_s": 214.564, "end_s": 224.372, "action": "Clicked and orbited/zoomed around the room model, then selected the narrow wall face; the view ended on a close-up with the face highlighted.", "intent": "Select and inspect the wall face for a possible modeling operation.", "app": "SketchUp 2026", "details": "A single control-key event occurred near the end, but no confirmed command result was visible."}, {"start_s": 224.372, "end_s": 234.718, "action": "Scrolled and clicked around the wall, switched to the Select tool, and repositioned the camera; the model ended in a close view of the wall edge with a face selected.", "intent": "Select or inspect elements of the wall and nearby floor layout.", "app": "SketchUp 2026", "details": "Brief key presses occurred while navigating; the visible result was selection and view adjustment rather than a confirmed edit."}, {"start_s": 234.718, "end_s": 246.039, "action": "Scrolled and orbited the model, clicking around the wall and floor area until the camera reached a wider frontal view of the room partitions.", "intent": "Review the modeled partitions and overall room layout from a broader angle.", "app": "SketchUp 2026", "details": "Orbit tool was active during the later view changes."}, {"start_s": 246.039, "end_s": 254.648, "action": "Adjusted the selected wall face with Push/Pull, then navigated around the model with clicks and scrolls while inspecting the resulting geometry.", "intent": "Modify and inspect a wall element in the SketchUp model.", "app": "SketchUp 2026", "details": "A narrow wall face is selected and its displayed Push/Pull distance changes during the span."}, {"start_s": 254.648, "end_s": 264.357, "action": "Entered a brief keyboard input, selected wall faces, and used Push/Pull to adjust the narrow wall sections while scrolling around the model.", "intent": "Continue shaping wall geometry to match the floor plan.", "app": "SketchUp 2026", "details": "The selected wall face is shown with Push/Pull active; the final view shows a narrow wall section extending from the floor."}, {"start_s": 264.357, "end_s": 273.149, "action": "Selected a broad wall face and navigated with repeated scrolls, leaving the face highlighted while inspecting the surrounding walls and floor layout.", "intent": "Inspect and position the view for further wall editing.", "app": "SketchUp 2026", "details": "The highlighted vertical face remains selected as the camera shifts to a wider view."}, {"start_s": 273.149, "end_s": 283.378, "action": "Orbited and navigated around the model, then selected geometry and changed the view to inspect the room enclosure and floor plan from above and across the ground plane.", "intent": "Review the modeled walls and their placement in the floor plan.", "app": "SketchUp 2026", "details": "The Orbit tool is active in the later screenshots, showing the wall enclosure from changing viewpoints."}, {"start_s": 283.378, "end_s": 292.928, "action": "Navigated around the model with orbiting and scrolling, selected a narrow wall face, and inspected its position relative to the surrounding floor lines.", "intent": "Inspect the placement and alignment of a wall segment.", "app": "SketchUp 2026", "details": "A narrow vertical face is highlighted in the final view with a Push/Pull distance displayed."}, {"start_s": 292.928, "end_s": 303.706, "action": "Selected the narrow wall face, used Push/Pull to extend it substantially, and continued scrolling and inspecting the enlarged wall surface.", "intent": "Extend the wall element and verify the resulting geometry.", "app": "SketchUp 2026", "details": "The final screenshot shows a large highlighted wall face with a displayed Push/Pull distance of approximately 9 1/16 inches."}, {"start_s": 303.706, "end_s": 314.03, "action": "Adjusted the view with repeated clicks and scrolls while using the Push/Pull tool on a narrow wall face, changing the displayed distance as the camera moved around the model.", "intent": "Modify or inspect wall geometry in the SketchUp model.", "app": "SketchUp", "details": "Push/Pull tool remained active; no definite completed extrusion was visible."}, {"start_s": 314.03, "end_s": 323.969, "action": "Orbit\u00aded and zoomed around the interior wall layout with middle- and left-button clicks, keeping the Push/Pull tool active and repositioning the view to other wall faces.", "intent": "Navigate the model and inspect additional wall geometry.", "app": "SketchUp", "details": "The view changed from a close-up wall corner to a broader interior perspective."}, {"start_s": 323.969, "end_s": 334.085, "action": "Scrolled and clicked through the model, orbiting from a close wall view to an elevated perspective that showed several partition walls and the floor plan.", "intent": "Review the arrangement of interior partitions.", "app": "SketchUp", "details": "No unambiguous geometry change was visible."}, {"start_s": 334.085, "end_s": 343.157, "action": "Navigated closer to different wall corners with scrolling and clicks, keeping the Push/Pull tool active while inspecting faces and distances.", "intent": "Inspect and potentially adjust wall faces in the 3D model.", "app": "SketchUp", "details": "The camera moved between close-up wall and floor views."}, {"start_s": 343.157, "end_s": 352.76, "action": "Scrolled extensively, clicked the model, briefly typed a space, and switched to orbit navigation; the view pulled back to show the overall partition layout and part of the plan.", "intent": "Reframe and review the overall SketchUp model.", "app": "SketchUp", "details": "System network and power events occurred near the end; no definite model edit was confirmed."}, {"start_s": 352.76, "end_s": 363.32, "action": "Orbit\u00aded and zoomed across the model, then clicked and dragged over geometry; ended with an overhead view of the room partitions and staircase.", "intent": "Inspect the building layout from a broader overhead perspective.", "app": "SketchUp", "details": "Selection/orbit navigation was active; no clearly confirmed geometry modification was visible."}, {"start_s": 363.32, "end_s": 373.686, "action": "Clicked and scrolled through the SketchUp model, then zoomed out to show the raised-room model alongside a flat floor plan.", "intent": "Review the model layout and adjust the view.", "app": "SketchUp 2026", "details": null}, {"start_s": 373.686, "end_s": 383.695, "action": "Scrolled to zoom into the upper rooms and clicked within the central wall area while inspecting the geometry.", "intent": "Inspect the interior wall arrangement more closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 383.695, "end_s": 394.213, "action": "Typed \u201cp\u201d to activate Push/Pull, selected the central wall face, and adjusted the view while applying or preparing a height change.", "intent": "Modify the height of a wall face with Push/Pull.", "app": "SketchUp 2026", "details": "Push/Pull tool and distance readout were visible."}, {"start_s": 394.213, "end_s": 404.454, "action": "Clicked several wall faces and used Push/Pull operations, then zoomed and orbited back to a wider view of the room model.", "intent": "Continue editing wall geometry and review the resulting model.", "app": "SketchUp 2026", "details": "The Push/Pull cursor and distance readout were visible during the edits."}, {"start_s": 404.454, "end_s": 414.01, "action": "Orbited and zoomed around the model, clicked and dragged on wall geometry, and ended with the camera close to an interior wall.", "intent": "Inspect or refine the edited walls from different viewpoints.", "app": "SketchUp 2026", "details": "The Orbit tool was active near the end of the span."}, {"start_s": 414.01, "end_s": 420.548, "action": "Scrolled and orbited between an overall view and a close-up of the stair and adjoining walls, ending on the interior stair area.", "intent": "Review the model\u2019s stair and surrounding room geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 420.548, "end_s": 440.548, "action": "Remained idle while viewing the SketchUp model.", "intent": "Pause while reviewing the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 440.548, "end_s": 453.878, "action": "Resumed viewing, zoomed out with scroll input to reveal the 3D room model and adjacent floor plan, then middle-clicked in the workspace.", "intent": "Adjust the model view for broader inspection.", "app": "SketchUp 2026", "details": "The view changed from a close interior perspective to a wider view containing both layouts."}, {"start_s": 453.878, "end_s": 462.656, "action": "Scrolled repeatedly and middle-clicked to navigate the SketchUp workspace, changing the viewing angle and scale of the room model and floor plan.", "intent": "Inspect the two layouts from different viewpoints.", "app": "SketchUp 2026", "details": "The room model remained on the left and the detailed floor plan remained on the right."}, {"start_s": 462.656, "end_s": 471.415, "action": "Scrolled and middle-clicked to zoom out substantially, then clicked the navigation area, leaving both layouts smaller within the workspace.", "intent": "Reframe the overall model and plan.", "app": "SketchUp 2026", "details": "The axes became visible and the two layouts were shown together at a distant scale."}, {"start_s": 471.415, "end_s": 488.644, "action": "Clicked twice in the SketchUp workspace near the floor-plan area without a visible change, then paused.", "intent": "Attempt to interact with or inspect the displayed layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 488.644, "end_s": 499.12, "action": "Scrolled repeatedly to navigate the view, middle-clicked near the floor plan, and continued scrolling until the camera moved from an overview into a close interior view of the room model.", "intent": "Inspect the 3D room geometry more closely.", "app": "SketchUp 2026", "details": "The final view showed enlarged interior walls and partitions, with the adjacent plan no longer visible."}, {"start_s": 499.12, "end_s": 509.259, "action": "Selected and adjusted faces in the SketchUp model while navigating the close-up view; entered short keyboard inputs and left a large upper face selected.", "intent": "Modify geometry in the wall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 509.259, "end_s": 519.416, "action": "Activated Push/Pull, selected wall faces, navigated around the model, and entered 3 feet to set a face distance, visibly extending the geometry.", "intent": "Change the height or depth of selected wall geometry.", "app": "SketchUp 2026", "details": "Push/Pull distance fields visibly show approximately 7 15/16 inches and 2 2 3/4 inches during the edits."}, {"start_s": 519.416, "end_s": 529.24, "action": "Navigated and zoomed out from the close-up, selected a face for Push/Pull, entered a short input, and ended with a wider view of the house model and adjacent floor plan.", "intent": "Inspect the edited model and reposition the working view.", "app": "SketchUp 2026", "details": "The final view shows the 3D room layout alongside a 2D floor-plan reference."}, {"start_s": 529.24, "end_s": 539.016, "action": "Orbited and zoomed around the interior walls, clicked a wall area repeatedly, and entered a short keyboard input while inspecting the model.", "intent": "Navigate and prepare another wall-geometry edit.", "app": "SketchUp 2026", "details": null}, {"start_s": 539.016, "end_s": 549.005, "action": "Selected endpoints and drew a rectangular face across a wall opening, then used Push/Pull on the new face; the result appears as a horizontal rectangular element spanning the opening.", "intent": "Create and extrude a rectangular wall or opening element.", "app": "SketchUp 2026", "details": "The Rectangle tool displayed dimensions of approximately 6 feet by 3 feet before the face was pushed."}, {"start_s": 549.005, "end_s": 561.37, "action": "Used Push/Pull with a 3-foot entry, navigated and orbited around the house model, and finished in a higher-angle interior view with the Orbit tool active.", "intent": "Adjust the newly created geometry and review the overall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 561.37, "end_s": 571.112, "action": "Adjusted the view and used the Rectangle tool to draw a small rectangular profile, then switched to Push/Pull and raised the selected face to form a horizontal wall or beam segment.", "intent": "Create and extrude a small architectural element in the SketchUp model.", "app": "SketchUp 2026", "details": null}, {"start_s": 571.112, "end_s": 580.988, "action": "Navigated around the model with orbit/zoom controls, selected a face, and entered 3' before confirming; the view then zoomed out to show the larger room layout.", "intent": "Set or adjust a dimension on a selected model face while checking the surrounding geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 580.988, "end_s": 591.448, "action": "Selected and navigated around the room geometry, then zoomed out and repositioned the camera to review the walls, openings, and stair area from above.", "intent": "Inspect the developing floor-plan model from a broader viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 591.448, "end_s": 611.052, "action": "Zoomed out and panned/orbited across the SketchUp workspace, bringing the modeled room block and a separate reference floor plan into a wider view.", "intent": "Review the model layout against the visible reference drawing.", "app": "SketchUp 2026", "details": null}, {"start_s": 611.052, "end_s": 621.168, "action": "Navigated back into the room model, activated the Rectangle tool, and began drawing a rectangle across the interior geometry while adjusting the view.", "intent": "Lay out another rectangular element on the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 621.168, "end_s": 630.997, "action": "Continued placing rectangle corners on the model, then moved to another area and started a second rectangle; the active rectangle remained in progress with dimension feedback visible.", "intent": "Continue drawing rectangular geometry in the SketchUp model.", "app": "SketchUp 2026", "details": null}, {"start_s": 630.997, "end_s": 639.259, "action": "Entered 3' in the active SketchUp tool and confirmed it, then scrolled and middle-clicked to orbit the 3D room model to a wider overhead view.", "intent": "Adjust the model view while working with the active tool.", "app": "SketchUp 2026", "details": "The wall layout remained visible and the distance field showed 3'."}, {"start_s": 639.259, "end_s": 647.898, "action": "Scrolled and middle-clicked to continue orbiting and slightly repositioning the overhead view of the modeled rooms.", "intent": "Inspect the room layout from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 647.898, "end_s": 661.384, "action": "Middle-clicked and scrolled to orbit and zoom out from the wall model, then clicked to switch to the Select tool.", "intent": "Review the model and change from modeling navigation to selection.", "app": "SketchUp 2026", "details": "The final view showed the small 3D building alongside a 2D floor plan."}, {"start_s": 661.384, "end_s": 671.882, "action": "Clicked and scrolled extensively to navigate across the workspace, zooming from the 3D model toward the detailed 2D floor plan and then back to a wider view.", "intent": "Compare the 3D wall model with the reference floor plan.", "app": "SketchUp 2026", "details": "The view alternated between the detailed floor-plan drawing and the 3D wall layout."}, {"start_s": 671.882, "end_s": 680.715, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom around the 3D model, bringing the stair area and adjacent walls into close view before returning toward the floor plan.", "intent": "Inspect the modeled stair and room geometry against the plan.", "app": "SketchUp 2026", "details": "The active navigation cursor indicated orbiting during part of the span."}, {"start_s": 680.715, "end_s": 689.743, "action": "Scrolled and middle-clicked to zoom and orbit around the 3D model, then zoomed far out to show the complete 3D model and the separate 2D floor plan together.", "intent": "Review the overall relationship between the 3D model and reference plan.", "app": "SketchUp 2026", "details": "The final view showed both layouts as small separate objects in the workspace."}, {"start_s": 689.743, "end_s": 696.586, "action": "Scrolled and middle-clicked within the SketchUp floor plan, then clicked repeatedly while zooming toward the upper-left bedroom area.", "intent": "Navigate and inspect a specific region of the floor plan.", "app": "SketchUp 2026", "details": "The view changed from a broad floor-plan overview to a close-up of the upper-left bedroom and adjacent doorway."}, {"start_s": 696.586, "end_s": 711.318, "action": "Paused with the close-up floor-plan view displayed and made a brief scroll adjustment near the end.", "intent": "Continue reviewing the selected floor-plan area.", "app": "SketchUp 2026", "details": "No visible geometry change occurred."}, {"start_s": 711.318, "end_s": 722.359, "action": "Scrolled and entered guide-placement mode, clicked near the upper-left room detail, and pressed Space to finish or exit the operation.", "intent": "Place or inspect a guide aligned with the room geometry.", "app": "SketchUp 2026", "details": "A guide indicator and length readout appeared beside the large decorative symbol."}, {"start_s": 722.359, "end_s": 732.199, "action": "Adjusted the camera with middle-click navigation and scrolling, entered guide-placement mode again, clicked near the decorative symbol, and pressed Space.", "intent": "Reposition the view and work with another guide around the room detail.", "app": "SketchUp 2026", "details": "The view alternated between close and wider views of the upper-left room."}, {"start_s": 732.199, "end_s": 742.554, "action": "Placed another guide by clicking and dragging near the upper wall, navigated with middle-clicks, and pressed Space while continuing to adjust the view.", "intent": "Align construction guides with the room perimeter and inspect their placement.", "app": "SketchUp 2026", "details": "A guide line and length readout were visible across the upper wall area."}, {"start_s": 742.554, "end_s": 755.636, "action": "Navigated with middle-clicks and extensive scrolling to zoom out from the bedroom detail, then clicked in the model area.", "intent": "Return to a broader overview of the architectural model.", "app": "SketchUp 2026", "details": "The final view showed a zoomed-out floor plan alongside a partial three-dimensional building view."}, {"start_s": 755.636, "end_s": 766.365, "action": "Scrolled and clicked repeatedly while navigating the SketchUp model, then orbited or panned the view until the floor plans shifted dramatically and became mostly off-screen.", "intent": "Navigate and inspect the 3D architectural model.", "app": "SketchUp 2026", "details": "The view changed from a split 3D/floor-plan overview to a close, largely empty model area."}, {"start_s": 766.365, "end_s": 776.782, "action": "Scrolled through the model, typed a character, selected a point near the upper-left room area, and entered a guide or drawing interaction before pressing Escape and Space.", "intent": "Inspect and begin editing geometry near the room layout.", "app": "SketchUp 2026", "details": "The camera moved to a close-up of a furnished bedroom and adjacent bathroom; a guide/drawing tool was active near the wall."}, {"start_s": 776.782, "end_s": 785.99, "action": "Clicked and scrolled around the floor-plan model, then selected and dragged within the plan before making additional point selections.", "intent": "Navigate and select architectural elements in the floor plan.", "app": "SketchUp 2026", "details": "The view returned to a wider plan view and then zoomed toward the upper bedrooms and central dining area."}, {"start_s": 785.99, "end_s": 796.044, "action": "Scrolled and typed while zooming into the upper-left room, selected a corner, and drew or adjusted a rectangular shape along the room boundary.", "intent": "Create or modify a rectangular architectural element.", "app": "SketchUp 2026", "details": "A new blue-outlined rectangle appeared beside the wall and tree symbol, with dimensions shown in the status area."}, {"start_s": 796.044, "end_s": 805.308, "action": "Clicked within the upper-left room, scrolled and adjusted the view across the floor plan, then used undo commands to revise the recent edit.", "intent": "Review and correct the recent floor-plan modification.", "app": "SketchUp 2026", "details": "The room briefly showed purple face highlighting before the camera returned to a wider plan view."}, {"start_s": 805.308, "end_s": 815.473, "action": "Scrolled and clicked through the upper bedroom and bathroom areas, orbited or panned the model, and continued selecting points before zooming back out to the overall split view.", "intent": "Inspect the edited floor-plan area and restore an overview.", "app": "SketchUp 2026", "details": "The final view showed the 3D room mass on the left and the black-and-white floor plan on the right."}, {"start_s": 815.473, "end_s": 825.478, "action": "Scrolled and adjusted the SketchUp view, entered a character, clicked around the upper-left room geometry, and selected the large floor face, which became stippled.", "intent": "Inspect and select geometry in the floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 825.478, "end_s": 835.655, "action": "Clicked around the selected floor-plan geometry, navigated the view, then dragged and right-clicked near the upper-left wall area; the view shifted to a closer 3D perspective with a small rectangular face selected.", "intent": "Navigate and manipulate a wall or face in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 835.655, "end_s": 845.968, "action": "Activated Push/Pull, dragged the selected rectangular face, entered 10' and confirmed it, then zoomed and orbited out to reveal more of the building plan.", "intent": "Extrude the selected face to a specified 10-foot distance.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly showed 10'."}, {"start_s": 845.968, "end_s": 856.131, "action": "Orbited and zoomed around the model, clicked near the upper-left room area, and repositioned the view to inspect the floor plan and wall geometry.", "intent": "Review the modified model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 856.131, "end_s": 866.058, "action": "Selected a wall face, activated Push/Pull, and adjusted its extrusion while navigating the close-up view; the distance indicator changed from approximately 7 3/4\" to 6\".", "intent": "Modify the wall thickness or extrusion using Push/Pull.", "app": "SketchUp 2026", "details": "The Push/Pull distance readouts visibly showed approximately 7 3/4\" and later 6\"."}, {"start_s": 866.058, "end_s": 874.684, "action": "Continued Push/Pull manipulation on the large wall face, orbiting and zooming around its base; the visible distance readout changed through approximately 1' 6 7/8\" and ended at 3' 6\".", "intent": "Continue adjusting the selected wall extrusion to a new depth.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly ended at 3' 6\"."}, {"start_s": 874.684, "end_s": 884.259, "action": "Scrolled repeatedly through the SketchUp model and clicked the active face, bringing the view closer to the freestanding wall over the floor plan.", "intent": "Navigate and adjust the model view while working on the wall face.", "app": "SketchUp 2026", "details": "Push/Pull tool remained active; the distance readout changed during navigation."}, {"start_s": 884.259, "end_s": 904.259, "action": "Waited with the SketchUp model visible, then scrolled to reposition the view around the wall and floor plan.", "intent": "Review the model from a different viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 904.259, "end_s": 913.689, "action": "Scrolled and used middle-button view navigation around the wall and adjacent room layout, changing the camera to a closer angled view.", "intent": "Inspect and position the model for continued editing.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained selected and no definite geometry change was visible."}, {"start_s": 913.689, "end_s": 933.689, "action": "Remained inactive while viewing the SketchUp scene showing the wall, furniture outlines, and floor plan.", "intent": "Pause to review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 933.689, "end_s": 948.976, "action": "Resumed after a brief system-state interruption, scrolled to adjust the camera, and used middle-button navigation near the wall and room plan.", "intent": "Reposition the model view for inspection or editing.", "app": "SketchUp 2026", "details": "The application view stayed on the same wall and floor-plan area."}, {"start_s": 948.976, "end_s": 959.72, "action": "Used middle-button navigation and scrolling to move closer to the wall base and bed area, then clicked the model face while the Push/Pull tool remained active.", "intent": "Inspect and potentially prepare the wall face for a Push/Pull edit.", "app": "SketchUp 2026", "details": "The view ended in a close-up of the wall corner and bed outlines; no clear extrusion result was visible."}, {"start_s": 959.72, "end_s": 969.731, "action": "Scrolled and clicked around the SketchUp model while using the Push/Pull tool, then changed the camera to reveal more of the floor plan and wall geometry.", "intent": "Inspect and adjust the 3D model view.", "app": "SketchUp 2026", "details": "The view moved from a close-up wall corner to a wider apartment floor-plan perspective."}, {"start_s": 969.731, "end_s": 980.01, "action": "Scrolled through the model and clicked several faces, keeping the Push/Pull tool active as the camera shifted around the wall corner and adjacent floor plan.", "intent": "Inspect model faces and positioning.", "app": "SketchUp 2026", "details": "The visible model remained an apartment plan with a partially extruded wall."}, {"start_s": 980.01, "end_s": 989.843, "action": "Scrolled and middle-clicked to orbit the camera, switching to a wider overhead view and then returning toward the wall and bedroom area.", "intent": "Reorient the 3D view for inspection.", "app": "SketchUp 2026", "details": "The Orbit tool became active and the view showed more of the apartment layout."}, {"start_s": 989.843, "end_s": 1000.125, "action": "Clicked and scrolled around the wall corner, zooming between close and wider views of the wall, floor plan, and surrounding rooms.", "intent": "Inspect the wall geometry from different distances.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active and the wall faces were visibly shaded."}, {"start_s": 1000.125, "end_s": 1009.712, "action": "Clicked and navigated around the model with scrolling and middle-click orbiting, moving from a close wall view to a broad exterior perspective of the apartment and adjacent geometry.", "intent": "Review the model in a wider 3D context.", "app": "SketchUp 2026", "details": "The final view showed the apartment plan, raised walls, and additional surrounding model geometry."}, {"start_s": 1009.712, "end_s": 1018.75, "action": "Scrolled and orbited around the apartment, zooming out to an overhead view and then moving back toward the interior floor plan; clicked to switch to the Select tool.", "intent": "Inspect the completed wall placement and prepare for selection.", "app": "SketchUp 2026", "details": "The final screenshot showed the Select tool active and a close overhead view of the bathroom and dining area."}, {"start_s": 1018.75, "end_s": 1028.997, "action": "Selected and manipulated faces with the Push/Pull tool, entered a partial distance value, and adjusted the view around the bathroom wall and sink area.", "intent": "Modify the height or depth of a wall or architectural face.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance field showed 4 feet near the end of the span."}, {"start_s": 1028.997, "end_s": 1038.457, "action": "Continued selecting wall faces and using Push/Pull operations, changing the geometry around the narrow wall section while orbiting and zooming the model.", "intent": "Extend or refine the wall geometry in the floor-plan model.", "app": "SketchUp 2026", "details": "The selected wall face visibly changed from a flat face to an extruded vertical section."}, {"start_s": 1038.457, "end_s": 1049.236, "action": "Orbiting and zooming around the model, selected additional faces, and applied further Push/Pull adjustments to the partition walls near the bathroom and adjacent room.", "intent": "Inspect and refine the newly raised wall geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall corner to a wider 3D view showing several raised partitions."}, {"start_s": 1049.236, "end_s": 1058.332, "action": "Orbited and zoomed toward the bathroom sink and doorway, selected a face, and continued working with the Push/Pull tool on the wall geometry.", "intent": "Review and adjust wall faces around the bathroom fixture area.", "app": "SketchUp 2026", "details": "The Push/Pull cursor and distance readout remained visible while the camera moved closer to the sink."}, {"start_s": 1058.332, "end_s": 1067.691, "action": "Selected several wall and edge locations, orbited around the partition, and performed additional face operations while inspecting the corner from different angles.", "intent": "Refine the partition geometry and check its alignment within the floor plan.", "app": "SketchUp 2026", "details": "A midpoint inference label appeared during the selection work, and the final view was close to a large wall face."}, {"start_s": 1067.691, "end_s": 1077.026, "action": "Orbited and zoomed out around the model, navigated past the partition walls, and reviewed the resulting room layout from an elevated overall view.", "intent": "Inspect the completed wall modifications in the context of the surrounding floor plan.", "app": "SketchUp 2026", "details": "The final view showed the raised bathroom-like enclosure, adjacent dining area, and surrounding furniture outlines."}, {"start_s": 1077.026, "end_s": 1086.898, "action": "Navigated the SketchUp camera around the floor plan with middle-mouse orbiting and scrolling, briefly typed characters, and ended on an overview of the furnished apartment layout.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 1086.898, "end_s": 1097.109, "action": "Zoomed and orbited around the model, moving between a wide apartment view and a close view of the bedroom and adjacent bathroom area.", "intent": "Examine the room layout and furnishings more closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 1097.109, "end_s": 1107.939, "action": "Clicked repeatedly while navigating the model, orbited toward the exterior wall and bedroom, and activated the Tape Measure tool to begin placing a guide or measurement.", "intent": "Inspect the wall and room geometry and prepare a measurement.", "app": "SketchUp 2026", "details": "The Tape Measure status bar and measurement guide are visible near the end."}, {"start_s": 1107.939, "end_s": 1118.772, "action": "Entered a measurement of 1' and additional typed input, then orbited and zoomed out to review the guide and surrounding walls from wider angles.", "intent": "Set or adjust a measurement guide in the model.", "app": "SketchUp 2026", "details": "A green guide line and measurement readout are visible."}, {"start_s": 1118.772, "end_s": 1128.75, "action": "Orbited and zoomed around the newly measured wall section, shifting from a close wall view toward the patio, dining table, and adjacent rooms.", "intent": "Review the measured wall placement in the surrounding floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 1128.75, "end_s": 1139.519, "action": "Continued orbiting and zooming through the apartment model, moving past the partition walls to inspect the dining and living areas from several angles.", "intent": "Survey the interior layout after placing the guide.", "app": "SketchUp 2026", "details": null}, {"start_s": 1139.519, "end_s": 1149.544, "action": "Typed briefly, clicked, and orbited the SketchUp camera around the building corner and ground-plan geometry, bringing the planter/tree area into view.", "intent": "Adjust the 3D view to inspect the modeled corner and surrounding layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 1149.544, "end_s": 1159.82, "action": "Orbited and repositioned the camera across the paved ground and building edge, then clicked and typed while continuing to inspect the model.", "intent": "Navigate the model view and interact with nearby geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 1159.82, "end_s": 1169.724, "action": "Clicked near the building corner, activated the Push/Pull tool, and adjusted a face to create or modify a raised corner element; then orbited to review the result.", "intent": "Modify the building geometry at the corner and inspect the change.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance field showed approximately 1 3/4 inches."}, {"start_s": 1169.724, "end_s": 1179.641, "action": "Navigated around the model with orbiting and clicks, then selected a rectangular ground face near the building edge.", "intent": "Inspect the surrounding geometry and select a face for editing.", "app": "SketchUp 2026", "details": "A rectangular face was visibly highlighted near the end of the span."}, {"start_s": 1179.641, "end_s": 1189.26, "action": "Opened the context menu for the selected face, dismissed it, activated Push/Pull, and adjusted the face while orbiting and entering a numeric value.", "intent": "Extrude or modify the selected rectangular face.", "app": "SketchUp 2026", "details": "The context menu included Entity Info, Erase, Hide, Select, Make Group, Intersect Faces, and Add Snaps; Push/Pull was active afterward."}, {"start_s": 1189.26, "end_s": 1199.398, "action": "Entered a numeric Push/Pull distance and confirmed it, then orbited and zoomed out to review the resulting tall rectangular extrusion beside the building corner.", "intent": "Set the extrusion height and inspect the completed geometry in context.", "app": "SketchUp 2026", "details": "The distance field showed 3 feet, and the final view displayed a narrow vertical rectangular post."}, {"start_s": 1199.398, "end_s": 1208.651, "action": "Selected the Push/Pull tool, clicked and dragged faces around the doorway, and adjusted the extrusion distance while zooming and scrolling the model view.", "intent": "Modify the doorway geometry with Push/Pull operations.", "app": "SketchUp 2026", "details": "A white vertical face at the doorway was being extruded; the distance field showed changing measurements."}, {"start_s": 1208.651, "end_s": 1217.557, "action": "Continued clicking faces and scrolling around the doorway, then used middle-button view navigation to inspect the extruded wall from different angles.", "intent": "Inspect and refine the doorway extrusion.", "app": "SketchUp 2026", "details": "The view remained focused on the white doorway face and adjacent wall geometry."}, {"start_s": 1217.557, "end_s": 1226.925, "action": "Scrolled and zoomed out substantially, clicked the vertical face, and continued the Push/Pull operation while changing the camera to reveal the surrounding floor plan and wall section.", "intent": "Extend or inspect the selected wall geometry in the broader model context.", "app": "SketchUp 2026", "details": "The selected vertical wall element became visibly elongated as the camera pulled back."}, {"start_s": 1226.925, "end_s": 1237.119, "action": "Navigated around the model with scrolling and middle-button orbiting, clicked the wall face, and adjusted the view to inspect the long extruded wall beside the floor-plan layout.", "intent": "Review the wall extrusion and its placement in the model.", "app": "SketchUp 2026", "details": "The result appeared as a long, narrow wall-like extrusion with visible end faces."}, {"start_s": 1237.119, "end_s": 1243.775, "action": "Orbited and scrolled around the extruded wall, clicked nearby faces, and repositioned the camera to examine its corner and end geometry from above.", "intent": "Inspect the extrusion from multiple angles.", "app": "SketchUp 2026", "details": "The model view shifted from a close corner view to a higher, wider view of the wall and surrounding plan."}, {"start_s": 1243.775, "end_s": 1254.733, "action": "Scrolled and orbited around the wall, using middle-button navigation to settle on an elevated view of the long rectangular extrusion and its open top area.", "intent": "Finalize a visual inspection of the modified wall geometry.", "app": "SketchUp 2026", "details": "System configuration changes and memory pressure were reported at 1247.57s, but modeling continued normally."}, {"start_s": 1254.733, "end_s": 1264.581, "action": "Orbited and adjusted the SketchUp camera around the wall corner, using repeated middle-button drags and clicks to inspect the model from changing angles.", "intent": "Inspect the modeled wall and surrounding floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 1264.581, "end_s": 1274.691, "action": "Continued orbiting and zooming around the wall assembly, then activated Push/Pull and clicked a wall face, leaving the view pulled back to show the partial enclosure and floor plan.", "intent": "Inspect and begin modifying a wall face.", "app": "SketchUp 2026", "details": "The Push/Pull tool and a distance readout are visible during the span."}, {"start_s": 1274.691, "end_s": 1285.926, "action": "Adjusted the camera around the partial wall enclosure with middle-button navigation and scrolling, moving between elevated and angled views of the living-area floor plan.", "intent": "Review the wall layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 1285.926, "end_s": 1295.786, "action": "Selected a wall face, typed a single character, and used Push/Pull interactions to change the wall geometry while orbiting around it; the view ended on a wider perspective of the modified walls.", "intent": "Modify the wall geometry with Push/Pull.", "app": "SketchUp 2026", "details": "A stippled selected face and Push/Pull distance readout are visible."}, {"start_s": 1295.786, "end_s": 1305.807, "action": "Navigated through close and overhead views with orbiting and scrolling, then pulled back to display most of the apartment floor plan and surrounding walls.", "intent": "Review the overall model after the wall edits.", "app": "SketchUp 2026", "details": null}, {"start_s": 1305.807, "end_s": 1312.3, "action": "Orbited and zoomed out from a close exterior corner view to a broader overview showing the apartment model and a separate wall-group model side by side.", "intent": "Compare the modeled structures in an overall view.", "app": "SketchUp 2026", "details": null}, {"start_s": 1312.3, "end_s": 1322.103, "action": "Scrolled through the SketchUp model view and dragged across the workspace to select or reposition geometry.", "intent": "Adjust the model view and interact with visible building geometry.", "app": "SketchUp 2026", "details": "Displayed a floor plan alongside a separate wall model."}, {"start_s": 1322.103, "end_s": 1342.103, "action": "Scrolled repeatedly to zoom and navigate across the apartment floor plan, bringing living-room furniture and adjacent walls into close view.", "intent": "Inspect the interior layout in greater detail.", "app": "SketchUp 2026", "details": "No geometry edits are visibly confirmed."}, {"start_s": 1342.103, "end_s": 1359.098, "action": "Paused briefly, then scrolled to reposition the camera and used middle-button clicks to navigate around the living-room and exterior-wall area.", "intent": "Continue inspecting and orienting the 3D model.", "app": "SketchUp 2026", "details": "System state changes occurred during the brief pause, with no visible document action."}, {"start_s": 1359.098, "end_s": 1367.507, "action": "Scrolled extensively and used middle-button navigation to orbit or pan from a close view of the living area toward the surrounding walls and dining area.", "intent": "Examine different portions of the modeled interior.", "app": "SketchUp 2026", "details": "The camera view shifted while the floor plan and wall geometry remained visible."}, {"start_s": 1367.507, "end_s": 1376.767, "action": "Continued scrolling and middle-button navigation around the exterior wall, patio, living room, and dining area, then activated the Orbit tool.", "intent": "Navigate and inspect the model from another viewpoint.", "app": "SketchUp 2026", "details": "The Orbit tool was visibly active at the end of the span."}, {"start_s": 1376.767, "end_s": 1385.615, "action": "Navigated closer to the exterior wall, clicked repeatedly on a wall face, typed short entries, and activated Push/Pull to select and begin adjusting the top face of the wall geometry.", "intent": "Modify the selected wall component using SketchUp's Push/Pull operation.", "app": "SketchUp 2026", "details": "The final view shows a selected top face and the Push/Pull distance field reading approximately 1 11/16 inches."}, {"start_s": 1385.615, "end_s": 1396.109, "action": "Orbited, zoomed, and panned around the SketchUp interior model, changing from a close wall view to a wider overhead view.", "intent": "Inspect the modeled walls and floor-plan layout from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 1396.109, "end_s": 1405.843, "action": "Orbited and zoomed in toward the living-area floor plan and wall elements, ending on a close view of a wall beside the furniture layout.", "intent": "Examine the interior geometry and its placement against the floor plan.", "app": "SketchUp", "details": null}, {"start_s": 1405.843, "end_s": 1416.677, "action": "Continued orbiting and zooming around the wall and furniture area, then clicked near the wall while maintaining a close inspection view.", "intent": "Navigate the model to inspect the wall geometry and surrounding layout.", "app": "SketchUp", "details": null}, {"start_s": 1416.677, "end_s": 1426.125, "action": "Activated a modeling tool with keyboard input, clicked the wall face, and adjusted the selected face, leaving it highlighted with a distance readout visible.", "intent": "Modify or prepare to modify the selected wall face.", "app": "SketchUp", "details": "The selected face was highlighted and the status bar showed a Push/Pull-style distance readout."}, {"start_s": 1426.125, "end_s": 1436.793, "action": "Scrolled slightly, entered a keyboard command, and clicked the wall face again while the modeling tool remained active.", "intent": "Continue editing the selected wall face.", "app": "SketchUp", "details": "The wall face remained selected under the active Push/Pull-style tool."}, {"start_s": 1436.793, "end_s": 1443.555, "action": "Zoomed or orbited out to reveal more of the interior floor plan while keeping the edited wall area in view.", "intent": "Review the wall modification in the broader model context.", "app": "SketchUp", "details": null}, {"start_s": 1443.555, "end_s": 1453.83, "action": "Scrolled and orbited the SketchUp model around the partially constructed interior walls, then continued adjusting the camera to a closer wall view.", "intent": "Inspect the modeled walls and surrounding floor plan from different angles.", "app": "SketchUp", "details": null}, {"start_s": 1453.83, "end_s": 1464.017, "action": "Scrolled and repositioned the SketchUp camera, briefly selected near the wall geometry, and continued orbiting to review the partition layout.", "intent": "Examine the wall placement and adjacent room layout.", "app": "SketchUp", "details": null}, {"start_s": 1464.017, "end_s": 1475.089, "action": "Scrolled and adjusted the camera around the interior partitions, moving from a wider floor-plan view to a closer view of the walls and seating area.", "intent": "Inspect the partition geometry in context with the floor plan.", "app": "SketchUp", "details": null}, {"start_s": 1475.089, "end_s": 1484.444, "action": "Orbited and scrolled the SketchUp view around the interior wall and nearby furniture outlines, ending on an elevated view of the partitioned rooms.", "intent": "Review the model from alternate viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 1484.444, "end_s": 1495.581, "action": "Clicked the model and scrolled to reposition the camera, briefly highlighting a horizontal edge before returning to a wider view of the walls and rooms.", "intent": "Inspect wall edges and the surrounding layout.", "app": "SketchUp", "details": null}, {"start_s": 1495.581, "end_s": 1506.524, "action": "Clicked and scrolled through the SketchUp model, moving the camera across the bathroom, living-area outlines, and interior partitions while briefly selecting horizontal edges.", "intent": "Continue reviewing the interior wall layout and adjacent spaces.", "app": "SketchUp", "details": null}, {"start_s": 1506.524, "end_s": 1516.891, "action": "Zoomed and panned around the SketchUp floor-plan model, moving from a close view of furnished rooms to a tighter view of a bedroom and bathroom.", "intent": "Inspect different areas of the 3D floor plan.", "app": "SketchUp", "details": null}, {"start_s": 1516.891, "end_s": 1529.264, "action": "Zoomed out and panned to review a broader section of the floor plan, including bedrooms, bathrooms, dining areas, and interior partitions.", "intent": "Review the overall layout and room arrangement.", "app": "SketchUp", "details": null}, {"start_s": 1529.264, "end_s": 1539.071, "action": "Zoomed and panned across the floor plan, moving from a bedroom and doorway to a wider view centered on the stairwell and adjacent rooms.", "intent": "Inspect the central circulation area and surrounding rooms.", "app": "SketchUp", "details": null}, {"start_s": 1539.071, "end_s": 1551.132, "action": "Clicked within the model and adjusted the view, then zoomed and panned to center the stairwell, surrounding dining areas, bedrooms, and bathrooms.", "intent": "Examine the central stair and nearby room layout.", "app": "SketchUp", "details": null}, {"start_s": 1551.132, "end_s": 1561.294, "action": "Clicked repeatedly along the stair and floor-plan geometry, including a brief drag, while zooming and panning across the staircase and adjacent kitchen area.", "intent": "Inspect or select elements around the staircase and kitchen.", "app": "SketchUp", "details": null}, {"start_s": 1561.294, "end_s": 1572.618, "action": "Clicked on the floor-plan geometry and continued zooming and panning around the stairwell, entry area, bedroom, and kitchen edge.", "intent": "Continue reviewing the floor-plan details around the stairs and adjoining rooms.", "app": "SketchUp", "details": null}, {"start_s": 1572.618, "end_s": 1582.55, "action": "Clicked and scrolled through the SketchUp model, then orbited the view from a close floor-plan area to a broader overhead view of the furnished rooms.", "intent": "Inspect the 3D floor-plan model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 1582.55, "end_s": 1593.024, "action": "Scrolled and adjusted the SketchUp view to zoom toward the living and dining areas, then clicked the model, leaving visible edges highlighted blue.", "intent": "Examine and select geometry in the interior model.", "app": "SketchUp 2026", "details": "The living room, dining table, walls, and bathroom remain visible."}, {"start_s": 1593.024, "end_s": 1603.201, "action": "Clicked and scrolled repeatedly while orbiting and repositioning the camera around the furnished floor plan, ending on a close view of an exterior wall and adjacent room.", "intent": "Navigate through the model to inspect different architectural areas.", "app": "SketchUp 2026", "details": null}, {"start_s": 1603.201, "end_s": 1613.774, "action": "Selected faces and used the active Push/Pull tool around a wall and nearby plant area, entering a short text command and changing the view while manipulating the geometry.", "intent": "Modify or inspect wall geometry with Push/Pull.", "app": "SketchUp 2026", "details": "The Push/Pull tool is active and a distance readout is visible."}, {"start_s": 1613.774, "end_s": 1624.599, "action": "Clicked and navigated around the selected wall with the Push/Pull tool active, adjusting faces and orbiting or zooming to inspect the wall and adjacent furniture.", "intent": "Continue editing or checking the wall geometry.", "app": "SketchUp 2026", "details": "The wall face and surrounding floor-plan geometry remain visible with distance measurements shown."}, {"start_s": 1624.599, "end_s": 1634.274, "action": "Clicked wall and floor faces and used Push/Pull to adjust the base of the wall, changing the displayed distance from approximately 6 inches to 2 inches while zooming slightly.", "intent": "Refine the wall geometry dimensions.", "app": "SketchUp 2026", "details": "The Push/Pull cursor and distance readout remain visible at the wall base."}, {"start_s": 1634.274, "end_s": 1644.33, "action": "Orbit and scroll around the SketchUp model, clicking nearby geometry while changing the camera view.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 1644.33, "end_s": 1655.307, "action": "Activate Push/Pull, select a vertical face, and adjust its extrusion while orbiting and scrolling around the structure.", "intent": "Modify the depth of the selected wall face.", "app": "SketchUp 2026", "details": "The selected face remains highlighted and the Push/Pull distance field shows changing values."}, {"start_s": 1655.307, "end_s": 1665.767, "action": "Continue using Push/Pull on the wall geometry, clicking faces and adjusting the extrusion as the view shifts around the corner.", "intent": "Refine the wall dimensions.", "app": "SketchUp 2026", "details": "The selected wall face changes size, ending as a large extended white face."}, {"start_s": 1665.767, "end_s": 1671.355, "action": "Orbit and zoom out around the structure, revealing the surrounding floor plan and the selected interior wall face.", "intent": "Review the modified structure from an elevated angle.", "app": "SketchUp 2026", "details": "The model is shown as a partial enclosure with a highlighted interior face."}, {"start_s": 1671.355, "end_s": 1681.003, "action": "Scroll and orbit closer to the upper interior wall, leaving the long face selected.", "intent": "Inspect the extended wall surface.", "app": "SketchUp 2026", "details": "The selected face spans most of the visible upper wall."}, {"start_s": 1681.003, "end_s": 1691.224, "action": "Orbit and scroll around the enclosure, briefly using undo shortcuts while changing the camera to inspect the wall and corner geometry.", "intent": "Review or adjust recent modeling changes.", "app": "SketchUp 2026", "details": "The final view shows the corner wall and adjacent long wall from above."}, {"start_s": 1691.224, "end_s": 1701.313, "action": "Navigated around the SketchUp model with repeated middle-button view movements and scrolls, then selected faces with the active Push/Pull tool; the camera moved from a close wall corner to another close view.", "intent": "Inspect and position the model for further wall editing.", "app": "SketchUp 2026", "details": "Push/Pull tool remained active; no visible distance change was confirmed."}, {"start_s": 1701.313, "end_s": 1707.697, "action": "Continued orbiting and scrolling around the model, clicking near the wall and floor while keeping the Push/Pull tool active; the view shifted to a side and lower perspective of the wall geometry.", "intent": "Inspect wall faces and adjust the working viewpoint.", "app": "SketchUp 2026", "details": "No confirmed geometry modification was visible."}, {"start_s": 1707.697, "end_s": 1721.694, "action": "Paused on the SketchUp model, then made several scroll movements and a middle-button view adjustment that widened the view to show the wall, floor plan, and surrounding layout.", "intent": "Review the model from a broader perspective.", "app": "SketchUp 2026", "details": "No active geometry edit was confirmed."}, {"start_s": 1721.694, "end_s": 1731.371, "action": "Selected and manipulated model faces with the Push/Pull workflow while orbiting and scrolling; the view changed from a close wall edge to a wider view showing intersecting wall segments, and the distance readout increased to about 1'6\".", "intent": "Adjust the dimensions of a wall face and inspect the resulting geometry.", "app": "SketchUp 2026", "details": "Visible wall geometry changed during the Push/Pull operation."}, {"start_s": 1731.371, "end_s": 1741.132, "action": "Scrolled and clicked a wall face, then used Push/Pull to modify it; the selected face remained highlighted and the distance readout showed approximately 6 inches.", "intent": "Set or refine the thickness or offset of the selected wall face.", "app": "SketchUp 2026", "details": "A brief undo keystroke was recorded before the face operation; the final visible face remained selected."}, {"start_s": 1741.132, "end_s": 1751.292, "action": "Continued Push/Pull edits and view navigation, clicking wall faces and orbiting to a higher, wider perspective; the model showed the adjusted partition and adjoining wall segments within the floor plan.", "intent": "Refine the wall geometry and review the updated layout.", "app": "SketchUp 2026", "details": "The Push/Pull distance field displayed 6 inches during the visible edit."}, {"start_s": 1751.292, "end_s": 1761.361, "action": "Scrolled through the SketchUp model and orbited the camera to inspect the partial walls and floor plan.", "intent": "Inspect the 3D layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 1761.361, "end_s": 1770.84, "action": "Clicked a narrow wall face, entered a short text command, and activated Push/Pull to adjust the selected face while zooming and orbiting around it.", "intent": "Modify the height or extrusion of the selected wall face.", "app": "SketchUp 2026", "details": "The selected face showed a Push/Pull distance of approximately 4 inches."}, {"start_s": 1770.84, "end_s": 1774.914, "action": "Scrolled while keeping the narrow selected wall face in view, changing the displayed Push/Pull distance.", "intent": "Continue adjusting or inspect the wall extrusion.", "app": "SketchUp 2026", "details": "The displayed distance changed to approximately 1 foot 2 9/16 inches."}, {"start_s": 1774.914, "end_s": 1788.502, "action": "Scrolled and adjusted the selected wall face with Push/Pull, extending the narrow wall substantially upward.", "intent": "Set the wall section to a taller extrusion.", "app": "SketchUp 2026", "details": "The displayed Push/Pull distance reached approximately 6 feet 1 5/8 inches."}, {"start_s": 1788.502, "end_s": 1798.821, "action": "Clicked and orbited around the selected wall, then used Push/Pull and scrolling to inspect the extended wall from wider views.", "intent": "Review the modified wall and its relationship to the surrounding floor plan.", "app": "SketchUp 2026", "details": "The selected face displayed a distance of approximately 6 inches during part of the inspection."}, {"start_s": 1798.821, "end_s": 1808.917, "action": "Selected additional wall faces, used Push/Pull to extend another wall section, and orbited and zoomed out to review the overall floor-plan model.", "intent": "Continue building wall geometry and verify the result in the broader model.", "app": "SketchUp 2026", "details": "The final view showed multiple raised wall sections across the floor plan."}, {"start_s": 1808.917, "end_s": 1819.577, "action": "Navigated around the SketchUp interior model with repeated clicks, scrolling, and drags, changing the viewpoint from a wider selected-wall view to a closer view of the rooms and partitions.", "intent": "Inspect the 3D interior layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 1819.577, "end_s": 1829.227, "action": "Adjusted the camera around the floor plan and clicked several wall elements; selected a grouped model component and opened its context menu.", "intent": "Inspect or prepare to edit a wall group or component.", "app": "SketchUp 2026", "details": "The context menu displayed options including Entity Info, Erase, Hide, Lock, Edit Group, Explode, and Select."}, {"start_s": 1829.227, "end_s": 1838.833, "action": "Dismissed the context menu, navigated around the selected interior geometry, and clicked and briefly dragged wall faces while continuing to adjust the view.", "intent": "Inspect and potentially modify interior wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 1838.833, "end_s": 1850.027, "action": "Orbited and zoomed out from the interior walls to a broader overhead view of the house floor plan, then continued orbiting toward another room area.", "intent": "Review the overall house layout and reposition the camera.", "app": "SketchUp 2026", "details": "Middle-button interactions indicate camera orbit/navigation."}, {"start_s": 1850.027, "end_s": 1862.104, "action": "Continued orbiting and zooming across the 3D floor plan, moving from a close room view to a wider perspective that showed multiple rooms, furniture outlines, and partition walls.", "intent": "Survey the modeled interior from additional viewpoints.", "app": "SketchUp 2026", "details": "Navigation remained focused on camera movement rather than clearly confirmed geometry edits."}, {"start_s": 1862.104, "end_s": 1871.679, "action": "Selected faces and typed short inputs while using the Push/Pull tool, then adjusted the view and pushed or pulled a wall face; the final view showed the modified wall area and a distance readout.", "intent": "Edit the height or depth of an interior wall face with Push/Pull.", "app": "SketchUp 2026", "details": "The status bar showed Push/Pull guidance and a final distance of 7 inches."}, {"start_s": 1871.679, "end_s": 1881.253, "action": "Scrolled and clicked repeatedly while navigating the SketchUp model, then changed the camera view to inspect the raised interior walls and floor plan.", "intent": "Inspect the 3D architectural model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 1881.253, "end_s": 1889.956, "action": "Clicked and scrolled through the SketchUp scene, shifting the view downward and closer to the bathroom and adjacent floor-plan areas.", "intent": "Examine another portion of the architectural layout.", "app": "SketchUp", "details": null}, {"start_s": 1889.956, "end_s": 1898.52, "action": "Scrolled to reposition the camera, leaving a closer view of the bathroom fixtures and nearby bedroom area.", "intent": "Continue reviewing the model layout.", "app": "SketchUp", "details": null}, {"start_s": 1898.52, "end_s": 1908.428, "action": "Scrolled extensively and adjusted the camera, moving between close views of the bathroom, bed, and surrounding floor-plan geometry.", "intent": "Navigate and inspect model details.", "app": "SketchUp", "details": null}, {"start_s": 1908.428, "end_s": 1918.784, "action": "Scrolled and clicked faces while using the Push/Pull tool, entered short keyboard inputs, modified a wall element, and then zoomed out to review the overall floor plan.", "intent": "Edit wall geometry and inspect the resulting model layout.", "app": "SketchUp", "details": null}, {"start_s": 1918.784, "end_s": 1928.88, "action": "Scrolled and orbited the model, clicked a wall face repeatedly, and used the Push/Pull tool to adjust the selected wall section.", "intent": "Modify and inspect the interior wall geometry.", "app": "SketchUp", "details": null}, {"start_s": 1928.88, "end_s": 1938.149, "action": "Navigated around the SketchUp floor plan with repeated scrolls and clicks, zooming between a wider apartment view and close views of the modeled walls and bathroom area.", "intent": "Inspect and position the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 1938.149, "end_s": 1948.035, "action": "Entered brief keyboard inputs, clicked around the model, and repeatedly scrolled to zoom and reposition the view from a bathroom close-up toward the adjacent dining and bedroom areas.", "intent": "Continue inspecting and positioning the model for editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 1948.035, "end_s": 1958.308, "action": "Used middle- and left-clicks with repeated scrolling to navigate around the apartment model, then selected a narrow wall face and adjusted the view while the Push/Pull tool remained active.", "intent": "Inspect and prepare a wall face for Push/Pull editing.", "app": "SketchUp 2026", "details": "A narrow wall face is visibly selected near the bedroom and the Push/Pull distance field is active."}, {"start_s": 1958.308, "end_s": 1968.589, "action": "Scrolled and clicked through close views of the selected wall beside the bedroom, progressively changing the Push/Pull distance and repositioning the camera around the wall and bed area.", "intent": "Adjust the selected wall geometry with Push/Pull.", "app": "SketchUp 2026", "details": "The selected wall face remains highlighted and the distance readout changes during the span."}, {"start_s": 1968.589, "end_s": 1980.699, "action": "Zoomed out substantially to review the overall apartment layout and surrounding model geometry, then paused with no further visible modeling action aside from a keyboard input near the end.", "intent": "Review the model at a wider scale.", "app": "SketchUp 2026", "details": null}, {"start_s": 1980.699, "end_s": 1990.254, "action": "Zoomed back toward the bedroom wall using scrolls and middle-click navigation, selected or maintained focus on the wall face, and left the Push/Pull distance at 0 inches.", "intent": "Return to and inspect the wall edit area.", "app": "SketchUp 2026", "details": "The wall face is highlighted in the close-up view and the distance field shows 0 inches."}, {"start_s": 1990.254, "end_s": 2000.755, "action": "Clicked and scrolled repeatedly while using Push/Pull on a wall face, increasing the displayed distance and repositioning the SketchUp view around the model.", "intent": "Modify the selected wall geometry and inspect the result.", "app": "SketchUp 2026", "details": "Push/Pull status and distance readout remained visible."}, {"start_s": 2000.755, "end_s": 2010.772, "action": "Clicked and scrolled around the model, then used middle-button navigation to zoom out from the wall area to an overview showing multiple floor-plan structures; switched back to selection near the end.", "intent": "Navigate and review the architectural model at different scales.", "app": "SketchUp 2026", "details": "The final view showed two building layouts and the edited wall geometry."}, {"start_s": 2010.772, "end_s": 2020.388, "action": "Scrolled and orbited around the model, moving from an overview into a closer top-down view of the furnished floor plan and room interiors.", "intent": "Inspect the floor-plan layout and interior elements.", "app": "SketchUp 2026", "details": "The view ended over rooms containing furniture, doors, beds, and other plan details."}, {"start_s": 2020.388, "end_s": 2030.421, "action": "Orbited and scrolled around the floor plan, clicked within the model, and changed the camera from a broad plan view to a close-up of a wall and adjacent furnished area.", "intent": "Review specific areas of the architectural model from different viewpoints.", "app": "SketchUp 2026", "details": "A close perspective of a wall, doorway, and rug/furniture area was visible at the end."}, {"start_s": 2030.421, "end_s": 2040.273, "action": "Clicked and dragged on model geometry, navigated with middle-button actions and scrolling, and selected wall faces; typed a command shortcut before switching to a guide-related tool.", "intent": "Select and inspect wall geometry while preparing a measurement or guide operation.", "app": "SketchUp 2026", "details": "Selected faces were highlighted blue, and the final screen showed the guide tool with a Length field."}, {"start_s": 2040.273, "end_s": 2049.086, "action": "Navigated slightly, clicked the wall area, scrolled, and entered 1' followed by Enter while placing a guide; the guide measurement updated on the selected wall face.", "intent": "Place or adjust a guide at a one-foot distance on the wall.", "app": "SketchUp 2026", "details": "The guide tool displayed an approximately 7 1/16-inch on-screen measurement after entry."}, {"start_s": 2049.086, "end_s": 2058.257, "action": "Placed a guide on the model and entered a distance of 3 feet.", "intent": "Create a guide at a specified distance.", "app": "SketchUp 2026", "details": "The guide-placement tool was active and the Length field showed approximately 2' 2 7/8\" before the 3' entry."}, {"start_s": 2058.257, "end_s": 2069.241, "action": "Placed another guide using a 4-foot entry, switched tools, and selected a face for modification; the resulting offset was limited to 6 inches.", "intent": "Add construction geometry and modify a wall or face by a constrained distance.", "app": "SketchUp 2026", "details": "The final view showed a white rectangular face and the message \"Offset limited to -6\\\"\" with Distance 6\\\"."}, {"start_s": 2069.241, "end_s": 2078.248, "action": "Adjusted the 3D view with orbit and pan actions, then used the active push/pull tool while navigating around the wall geometry.", "intent": "Inspect and reposition the model while continuing a face-editing operation.", "app": "SketchUp 2026", "details": "The camera moved from a close wall view to a wider architectural model view; no definite new geometry change is visible."}, {"start_s": 2078.248, "end_s": 2087.756, "action": "Navigated extensively through the model with scrolling, orbiting, and selection gestures, moving from an elevated building view to a closer floor-plan view.", "intent": "Inspect the architectural model from different viewpoints.", "app": "SketchUp 2026", "details": "The model view changed to show rooms, walls, doors, stairs, and floor-plan furnishings."}, {"start_s": 2087.756, "end_s": 2096.9, "action": "Continued orbiting and zooming around the floor plan, opened the Edit menu, and then returned to the model view.", "intent": "Review the model and access editing commands.", "app": "SketchUp 2026", "details": "The Edit menu was briefly visible with commands including Undo Close, Delete Guides, Select All, and Unhide."}, {"start_s": 2096.9, "end_s": 2106.767, "action": "Scrolled and orbited through the architectural model, briefly leaving the canvas blank during navigation before restoring an elevated view of the rooms.", "intent": "Inspect the model from another overall viewpoint.", "app": "SketchUp 2026", "details": "The final view showed an elevated overview of multiple rooms, walls, furnishings, and stairs."}, {"start_s": 2106.767, "end_s": 2126.767, "action": "Navigated the SketchUp model with repeated scroll inputs, shifting from a wide view of two floor plans toward a closer view of the layouts.", "intent": "Inspect different areas of the architectural model.", "app": "SketchUp", "details": null}, {"start_s": 2126.767, "end_s": 2135.562, "action": "Continued navigating with repeated scroll inputs and middle-clicks, zooming into the central rooms and stair area; the view then became blank gray by the end of the span.", "intent": "Examine interior plan details and reposition the model view.", "app": "SketchUp", "details": "The final screenshot shows an empty gray SketchUp viewport with the model out of view."}, {"start_s": 2135.562, "end_s": 2147.418, "action": "Scrolled through the SketchUp model and used middle-click navigation to inspect bedrooms, bathrooms, and adjacent rooms from closer angles, then switched toward Windows Explorer at the end.", "intent": "Review additional areas of the architectural model before changing applications.", "app": "SketchUp", "details": "An app-switch event to Windows Explorer occurred at the boundary."}, {"start_s": 2147.418, "end_s": 2157.466, "action": "Returned to the SketchUp window and navigated around a close-up corner of the floor plan with repeated scrolling and clicks; typed the letter 'r' near the end.", "intent": "Continue inspecting and possibly editing the close-up model area.", "app": "SketchUp", "details": "The viewport remains focused on a wall corner, doorway, and plant symbol."}, {"start_s": 2157.466, "end_s": 2168.201, "action": "Selected and manipulated a small rectangular face near the plant symbol with clicks, a drag, and a spacebar input, while zooming and repositioning the view.", "intent": "Edit or inspect the selected rectangular geometry.", "app": "SketchUp", "details": "The selected face is highlighted and the Dimensions field shows approximately 2 3/4 inches by 3 1/4 inches."}, {"start_s": 2168.201, "end_s": 2178.752, "action": "Adjusted the selected rectangular face with repeated clicks, right-clicks, and drags, typed 'p', then activated Push/Pull and entered 3' followed by Enter.", "intent": "Modify the selected SketchUp face using drawing and Push/Pull tools.", "app": "SketchUp", "details": "The final view shows the selected face with the Push/Pull tool active and Distance set to 0 inches."}, {"start_s": 2178.752, "end_s": 2188.162, "action": "Clicked and orbited around the selected vertical face, then scrolled to adjust the SketchUp view.", "intent": "Inspect and reposition the model view around the selected face.", "app": "SketchUp 2026", "details": "A close-up of the wall, floor lines, and snowflake-like ground geometry remained visible."}, {"start_s": 2188.162, "end_s": 2197.656, "action": "Scrolled extensively and orbited away from the close-up, briefly leaving a blank view before revealing the broader floor plan and building model; then clicked near the top of the model.", "intent": "Navigate to and inspect a wider area of the 3D model.", "app": "SketchUp 2026", "details": "The final view showed multiple floor-plan units and an upper box-like building."}, {"start_s": 2197.656, "end_s": 2206.18, "action": "Scrolled and orbited back toward the wall, clicked the vertical face repeatedly, and typed 'p' while manipulating the selected geometry.", "intent": "Work on the selected wall face using SketchUp modeling controls.", "app": "SketchUp 2026", "details": "The wall face became highlighted with the Push/Pull-style cursor and distance readout visible."}, {"start_s": 2206.18, "end_s": 2215.998, "action": "Scrolled and orbited around the selected wall and adjacent paved area, then clicked the model at several points.", "intent": "Inspect and adjust the selected wall geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The selected vertical face remained highlighted while the view shifted toward the surrounding floor and patterned area."}, {"start_s": 2215.998, "end_s": 2226.37, "action": "Clicked and scrolled around the wall corner, orbited the camera, and clicked the selected face while typing 'p'.", "intent": "Continue editing or inspecting the selected wall face.", "app": "SketchUp 2026", "details": "The view showed the wall corner, floor outlines, and patterned ground surface; the selected face remained highlighted."}, {"start_s": 2226.37, "end_s": 2236.793, "action": "Scrolled and orbited around the wall, clicked the selected face, and pulled back to a wider view of the wall and surrounding floor plan.", "intent": "Review the edited wall in the context of the larger model.", "app": "SketchUp 2026", "details": "The final view showed a long wall segment, nearby structural elements, and floor-plan furniture outlines."}, {"start_s": 2236.793, "end_s": 2247.01, "action": "Navigated the SketchUp model with repeated scrolls and middle-click view adjustments, then clicked around the visible architectural geometry.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 2247.01, "end_s": 2261.41, "action": "Continued navigating the SketchUp model with view adjustments and repeated scrolling, shifting the view along the architectural structure.", "intent": "Inspect another portion of the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 2261.41, "end_s": 2271.947, "action": "Selected a face, entered a push/pull operation, and adjusted the extrusion; the visible vertical wall or column became raised in the model.", "intent": "Modify the height of a selected architectural face.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance field visibly showed approximately 8 inches."}, {"start_s": 2271.947, "end_s": 2281.961, "action": "Orbited and panned around the model while scrolling, reviewing the newly modified wall or column and the surrounding floor-plan geometry.", "intent": "Review the model modification from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 2281.961, "end_s": 2291.806, "action": "Orbited and zoomed out through the SketchUp model, moving from a close architectural area to a broader interior floor-plan view.", "intent": "Inspect the broader layout and surrounding rooms.", "app": "SketchUp 2026", "details": null}, {"start_s": 2291.806, "end_s": 2296.4, "action": "Continued orbiting and scrolling to pull back to a wider overhead view showing multiple rooms, walls, furnishings, and patterned floor areas.", "intent": "Review the overall modeled floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 2296.4, "end_s": 2309.567, "action": "Reviewed the SketchUp floor-plan model from an angled overhead view and made minor scroll-based view adjustments.", "intent": "Inspect the interior layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 2309.567, "end_s": 2318.833, "action": "Selected and cleared selections on model geometry, then scrolled to adjust the overhead view around the bedroom and bathroom area.", "intent": "Navigate and inspect model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 2318.833, "end_s": 2327.703, "action": "Scrolled and adjusted the camera from a closer bedroom-and-bathroom view to a wider view showing adjacent rooms and furnishings.", "intent": "Broaden inspection of the floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 2327.703, "end_s": 2338.785, "action": "Continued scrolling to zoom and reposition the camera onto a closer view of the bedroom, doorway, and patterned floor area.", "intent": "Inspect a specific section of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 2338.785, "end_s": 2349.438, "action": "Used middle-mouse orbiting and scrolling to rotate and reposition the view around the patterned floor and doorway, ending on a close-up of the area.", "intent": "Examine the floor and doorway geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 2349.438, "end_s": 2359.691, "action": "Selected a small face or object near the patterned floor, opened its context menu, then activated Push/Pull and adjusted the selected geometry to create a raised rectangular block.", "intent": "Modify the selected model geometry.", "app": "SketchUp 2026", "details": "The final view shows the selected raised block with the Push/Pull tool active."}, {"start_s": 2359.691, "end_s": 2365.118, "action": "Entered 10' and confirmed it, then scrolled and changed the SketchUp view from a close wall view to an overhead view of the floor plan.", "intent": "Adjust the model view and work with the active tool.", "app": "SketchUp 2026", "details": "The view ends on an overhead perspective showing rooms, furnishings, walls, and openings."}, {"start_s": 2365.118, "end_s": 2383.897, "action": "Scrolled repeatedly to zoom and reposition the SketchUp camera, moving between a broader overhead floor-plan view and a closer view of the doorway and adjacent room.", "intent": "Inspect the modeled interior from different zoom levels.", "app": "SketchUp 2026", "details": "No geometry edits are visibly confirmed."}, {"start_s": 2383.897, "end_s": 2395.474, "action": "Continued scrolling to adjust the camera, alternating between wider and closer overhead views of the doorway, wall opening, bedroom, and surrounding floor plan.", "intent": "Review the model layout and inspect the doorway area.", "app": "SketchUp 2026", "details": "The model remains unchanged while the viewing angle and zoom shift."}, {"start_s": 2395.474, "end_s": 2405.117, "action": "Clicked around the wall and doorway area, typed p, and scrolled; activated the Push/Pull tool and selected a wall face, leaving a distance readout visible while repositioning the view.", "intent": "Prepare to modify a wall face with Push/Pull.", "app": "SketchUp 2026", "details": "The selected wall face is highlighted and the Measurements box shows a distance during the tool operation."}, {"start_s": 2405.117, "end_s": 2418.888, "action": "Scrolled extensively around the selected wall and doorway, then clicked and dragged near the wall while the Push/Pull tool remained active, changing to a wider view of the model.", "intent": "Inspect or position the wall face for a Push/Pull adjustment.", "app": "SketchUp 2026", "details": "The selected wall component remains visible; a completed dimensional change is not clearly confirmed."}, {"start_s": 2418.888, "end_s": 2428.838, "action": "Clicked and scrolled to reposition the camera, used keyboard undo commands, then clicked the wall area several times and typed p.", "intent": "Review or adjust the recent wall operation and restore the Push/Pull tool.", "app": "SketchUp 2026", "details": "The final view is a close-up of the wall corner and adjacent patterned floor area; no definite final geometry change is visible."}, {"start_s": 2428.838, "end_s": 2435.129, "action": "Clicked within the SketchUp model and scrolled repeatedly, changing the 3D view around a wall corner and floor area while the Push/Pull tool remained active.", "intent": "Adjust the model view and position the active modeling tool.", "app": "SketchUp", "details": "The distance field visibly changed from approximately 13/16 inch to 2 inches."}, {"start_s": 2435.129, "end_s": 2452.165, "action": "Scrolled and clicked in the SketchUp model, navigating to a higher view of the floor plan and switching back to the Select tool; then switched to Windows Explorer.", "intent": "Inspect and reposition the architectural model before changing applications.", "app": "SketchUp", "details": "The final screenshot shows a top-down floor-plan view with rooms and furniture outlines."}, {"start_s": 2452.165, "end_s": 2463.184, "action": "Switched to Microsoft Edge, edited the address-bar text with backspaces and typed replacement characters, including \u201cCB IN\u201d and later additional corrections.", "intent": "Enter or revise a web search query.", "app": "Microsoft Edge", "details": "The Edge new-tab address bar was active; the query was partially visible as \u201cCB IN\u201d."}, {"start_s": 2463.184, "end_s": 2473.585, "action": "Typed \u201cfull form in arch\u201d into the Edge address bar and pressed Enter, loading Bing results for \u201ccb full form in architecture.\u201d", "intent": "Search for the meaning of the abbreviation CB in architecture.", "app": "Microsoft Edge", "details": "Bing displayed a result identifying CB as \u201cCatch Basin\u201d in architecture."}, {"start_s": 2473.585, "end_s": 2493.585, "action": "Reviewed the Bing results page and made several small scroll gestures while keeping the \u201ccb full form in architecture\u201d results visible.", "intent": "Read and inspect the search results.", "app": "Microsoft Edge", "details": "The prominent result stated that CB typically stands for Catch Basin, a structure for managing stormwater runoff."}, {"start_s": 2493.585, "end_s": 2510.867, "action": "Paused on the Bing results page, then switched to Windows Explorer near the end of the span.", "intent": "Finish reviewing the search result and change applications.", "app": "Microsoft Edge", "details": "The page remained on the Catch Basin result until the application switch."}, {"start_s": 2510.867, "end_s": 2521.322, "action": "Switched to the SketchUp window and navigated through the architectural model with repeated scrolling, zooming into a furnished room and adjacent floor-plan area.", "intent": "Inspect the 3D model and move to a closer room view.", "app": "Screen recorder / SketchUp 2026", "details": null}, {"start_s": 2521.322, "end_s": 2530.976, "action": "Clicked around the model, entered \u201cp,\u201d and activated the Push/Pull tool; selected a face near the room boundary and adjusted the view while the distance field showed 6 inches.", "intent": "Prepare and modify a selected architectural face with Push/Pull.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and a selected face was visible near the room edge."}, {"start_s": 2530.976, "end_s": 2540.952, "action": "Changed the camera with middle-button navigation and repeated scrolling, then clicked several model faces while using Push/Pull to work around walls and floor fixtures.", "intent": "Inspect and adjust multiple faces in the interior model.", "app": "SketchUp 2026", "details": "The view moved across bathrooms and adjoining rooms; Push/Pull remained active with changing distance readouts."}, {"start_s": 2540.952, "end_s": 2552.172, "action": "Scrolled and navigated across the model, clicked additional faces, and then pulled back to a broader isometric view showing the floor plan and raised walls.", "intent": "Review the model geometry from local and overall perspectives.", "app": "SketchUp 2026", "details": "The final view showed a larger portion of the furnished floor plan with several walls standing in 3D."}, {"start_s": 2552.172, "end_s": 2563.734, "action": "Scrolled through the isometric model, clicked and briefly dragged near a wall, entered \u201cp,\u201d and navigated back toward a bedroom and bathroom area.", "intent": "Continue inspecting or editing interior wall faces.", "app": "SketchUp 2026", "details": "Views alternated between the overall floor plan and a close-up bedroom/bathroom region."}, {"start_s": 2563.734, "end_s": 2573.843, "action": "Continued middle-button navigation and scrolling around the bedroom, then clicked a wall face and entered \u201cp,\u201d leaving a close view of the bed, sink, doorway, and selected wall edge.", "intent": "Position and prepare another interior face for Push/Pull editing.", "app": "SketchUp 2026", "details": "The final view remained focused on the bedroom and adjacent bathroom fixtures."}, {"start_s": 2573.843, "end_s": 2583.856, "action": "Adjusted the SketchUp view with repeated clicks and scrolls, then navigated from a close-up wall and room area to a wider floor-plan view.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active initially; the final view showed multiple rooms and walls."}, {"start_s": 2583.856, "end_s": 2593.68, "action": "Selected and manipulated a narrow wall face with clicks and a short drag, entered a character, and zoomed or scrolled into a close-up of the wall base and adjacent floor.", "intent": "Modify or inspect the selected wall geometry.", "app": "SketchUp 2026", "details": "The selected face remained highlighted and the Distance field showed changing measurements, ending at 0 inches."}, {"start_s": 2593.68, "end_s": 2603.31, "action": "Scrolled and navigated around the selected wall corner, entered space and a character, and used Push/Pull-style clicks to change the wall face depth while zooming closer.", "intent": "Adjust the wall geometry at its corner.", "app": "SketchUp 2026", "details": "The Distance field showed 6 inches and later approximately 2 11/16 inches as the wall face changed."}, {"start_s": 2603.31, "end_s": 2614.665, "action": "Continued scrolling and clicking around the wall and floor junction, entered space and a character, then orbited outward to review the modified room within the larger floor plan.", "intent": "Refine and review the wall modification in context.", "app": "SketchUp 2026", "details": "The final view showed the edited room enclosure from above with surrounding rooms visible."}, {"start_s": 2614.665, "end_s": 2623.083, "action": "Orbited and zoomed around the room enclosure, selected a large wall face, and used Push/Pull-style interaction to adjust or inspect it before returning to selection mode.", "intent": "Inspect or modify the large wall face.", "app": "SketchUp 2026", "details": "The wall face was shown prominently in close-up; the Distance field displayed 6 inches during the operation."}, {"start_s": 2623.083, "end_s": 2633.218, "action": "Selected and manipulated the floor or wall-adjacent face with clicks and scrolling, then orbited to a close view of the patterned floor area and wall corner.", "intent": "Adjust or inspect geometry near the room floor and wall junction.", "app": "SketchUp 2026", "details": "The final view focused on the patterned floor surface and the base of the wall; orbit mode was active."}, {"start_s": 2633.218, "end_s": 2643.434, "action": "Orbit the SketchUp model with middle-button drags and adjust the view with scrolling, moving from a close wall-and-floor view to a wider view of the architectural layout.", "intent": "Inspect the 3D model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 2643.434, "end_s": 2653.697, "action": "Continue orbiting and zooming the SketchUp model, briefly switching tools and navigating from an overhead layout view into a close-up of walls and floor edges.", "intent": "Review different areas and viewpoints of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 2653.697, "end_s": 2661.772, "action": "Scroll and orbit through the model, moving from a bathroom-like floor area with a circular fixture and door openings to an elevated view of the surrounding rooms and walls.", "intent": "Inspect interior details and spatial arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 2661.772, "end_s": 2672.575, "action": "Scroll extensively to zoom and reposition the camera, transitioning from a close room view to a broad elevated view of the floor plan, partitions, furniture outlines, and exterior walls.", "intent": "Survey the overall architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 2672.575, "end_s": 2681.921, "action": "Orbit and slightly zoom the model, settling on an angled overview of the building layout and its interior partitions.", "intent": "Continue reviewing the model from an alternate angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 2681.921, "end_s": 2701.197, "action": "Scroll and reposition the camera through several zoom levels, moving from a close exterior wall and patio edge to a wider overhead view of the rooms, stairs, fixtures, and partitions.", "intent": "Inspect the building model and regain a broader overview.", "app": "SketchUp 2026", "details": null}, {"start_s": 2701.197, "end_s": 2710.937, "action": "Navigated around the SketchUp house model by clicking and scrolling, changing the 3D view from a wider room layout to a closer doorway and patio area.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 2710.937, "end_s": 2721.233, "action": "Continued orbiting or panning through the SketchUp model with repeated scrolling and clicks, moving between the patio, doorway, dining area, and nearby walls.", "intent": "Review the surrounding model geometry.", "app": "SketchUp", "details": null}, {"start_s": 2721.233, "end_s": 2730.985, "action": "Typed shortcut keys and continued navigating the model, then selected a narrow edge or face near a wall and doorway with the drawing tool active.", "intent": "Position the view and begin editing a model element.", "app": "SketchUp", "details": "The final view shows a selected narrow edge/face and the drawing tool prompt for setting an opposite corner."}, {"start_s": 2730.985, "end_s": 2740.705, "action": "Clicked around the selected geometry, opened a context menu, then activated Push/Pull and entered 3 feet, creating a small rectangular extrusion at the wall base.", "intent": "Modify the selected architectural geometry by extruding it.", "app": "SketchUp", "details": "The context menu includes Entity Info, Erase, Hide, Intersect Faces, and other modeling commands; the resulting block is visibly extruded."}, {"start_s": 2740.705, "end_s": 2749.392, "action": "Used Push/Pull on successive faces of the new geometry, clicking and dragging to extend the narrow wall-side element while changing the displayed distances.", "intent": "Continue shaping the newly created extrusion.", "app": "SketchUp", "details": "The selected face is shown at different extrusion depths, including approximately 4 inches and 3/4 inch."}, {"start_s": 2749.392, "end_s": 2758.754, "action": "Continued Push/Pull edits and view navigation on the narrow extruded element, extending it farther and repositioning the camera near the adjacent patio planting and floor layout.", "intent": "Refine the dimensions and placement of the modeled element.", "app": "SketchUp", "details": "The Push/Pull distance readout reaches approximately 6 feet 4 inches and later 8 inches while the selected wall-side geometry remains highlighted."}, {"start_s": 2758.754, "end_s": 2767.387, "action": "Navigated around the SketchUp model with repeated view adjustments and clicks, then switched from Push/Pull to Select while the camera moved to a wider view of the room layout.", "intent": "Inspect the model and reposition the view for further editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 2767.387, "end_s": 2777.348, "action": "Adjusted the camera around the floor plan, clicked near the wall and floor geometry, and began interacting with the plant-area geometry using selection and drag actions.", "intent": "Inspect and select geometry near the plant and adjacent wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 2777.348, "end_s": 2787.343, "action": "Selected the small wall-area face, activated Push/Pull, entered a distance of 10 feet, and applied the extrusion while the view shifted to show more of the room.", "intent": "Modify the selected wall or face to a specified height.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly accepted 10'."}, {"start_s": 2787.343, "end_s": 2796.87, "action": "Continued Push/Pull editing on the wall geometry, dragging and clicking faces while orbiting or panning around the corner and adjacent plant area.", "intent": "Continue shaping the wall geometry and inspect the resulting form.", "app": "SketchUp 2026", "details": null}, {"start_s": 2796.87, "end_s": 2805.973, "action": "Undid recent operations, dragged across the selected wall face, and continued Push/Pull adjustments while changing the camera to inspect the corner from closer angles.", "intent": "Revise the wall extrusion and inspect the updated geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 2805.973, "end_s": 2815.356, "action": "Adjusted the camera around the wall and room corner with repeated scrolling and middle-click navigation, then clicked the large wall face while Push/Pull remained active.", "intent": "Inspect and prepare the large wall face for further modeling.", "app": "SketchUp 2026", "details": "System display and network state changed briefly during the span."}, {"start_s": 2815.356, "end_s": 2825.796, "action": "Scrolled and orbited around the SketchUp interior model, then clicked to adjust the view near the bedroom and wall geometry.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "The view moved from an elevated room view to a closer view of the bed area and adjacent wall."}, {"start_s": 2825.796, "end_s": 2835.629, "action": "Scrolled and orbited around the model, clicked the visible wall face, and continued repositioning the camera around the floor-plan geometry.", "intent": "Inspect the wall and surrounding floor-plan elements.", "app": "SketchUp 2026", "details": "The selected wall face and nearby floor outlines remained visible while the viewpoint changed."}, {"start_s": 2835.629, "end_s": 2845.47, "action": "Scrolled and orbited across the room layout, then pressed a key and clicked to switch back to selection and inspect the broader floor plan.", "intent": "Review the model layout from another angle.", "app": "SketchUp 2026", "details": "The view ended on a wider perspective showing the bedroom, corridor, doorway, and exterior planting outlines."}, {"start_s": 2845.47, "end_s": 2855.249, "action": "Orbited and scrolled over the floor-plan view, clicked several visible linework elements, and changed the selection state before continuing to inspect the layout.", "intent": "Select or review floor-plan geometry.", "app": "SketchUp 2026", "details": "Selected edges appeared blue temporarily, then the view returned to unselected black linework."}, {"start_s": 2855.249, "end_s": 2867.516, "action": "Scrolled and orbited outward from the room, clicked the model, and zoomed to a wider overview of the building floor plan and nearby structure.", "intent": "Review the overall building arrangement.", "app": "SketchUp 2026", "details": "The camera pulled back to show multiple rooms, furniture layouts, walls, and a separate nearby structure."}, {"start_s": 2867.516, "end_s": 2878.421, "action": "Orbited and scrolled around the building model, then pulled back substantially to an overview showing the main floor plan and a separate upper structure.", "intent": "Inspect the overall 3D model from a distant perspective.", "app": "SketchUp 2026", "details": "The final view displayed the complete main layout and detached structure together."}, {"start_s": 2878.421, "end_s": 2887.938, "action": "Orbited and zoomed the SketchUp model from a wide apartment view toward the furnished interior and floor plan.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 2887.938, "end_s": 2894.977, "action": "Continued orbiting and zooming around the model, moving from the wider floor plan to a close view of a furnished room and adjacent doorway.", "intent": "Examine the room layout and furnishings.", "app": "SketchUp 2026", "details": null}, {"start_s": 2894.977, "end_s": 2906.716, "action": "Repeatedly zoomed and navigated around the close-up room view, keeping the rug, seating, wall, and nearby floor details in view.", "intent": "Review specific interior model details.", "app": "SketchUp 2026", "details": null}, {"start_s": 2906.716, "end_s": 2916.548, "action": "Adjusted the camera with additional zooming and orbiting around the room edge, doorway, wall, and nearby plant detail.", "intent": "Inspect the model geometry from a closer angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 2916.548, "end_s": 2926.379, "action": "Navigated slightly, typed a tool shortcut, and clicked the floor area to begin drawing or editing a rectangular element near the wall and plant.", "intent": "Start creating or editing geometry on the floor plan.", "app": "SketchUp 2026", "details": "A small rectangular face or outline became visible near the wall."}, {"start_s": 2926.379, "end_s": 2935.32, "action": "Selected the new floor face, activated Push/Pull, and entered 10' to extrude it upward into a tall rectangular block or wall-like form.", "intent": "Create a vertical 3D element from the floor face.", "app": "SketchUp 2026", "details": "The selected rectangle was visibly extruded upward; the Push/Pull distance field showed approximately 5 3/16\" at the end."}, {"start_s": 2935.32, "end_s": 2945.602, "action": "Adjusted the SketchUp view around a tall wall face with scrolling and middle-button navigation, then clicked near the wall base while the face-measuring tool remained active.", "intent": "Inspect and position the model for work on the wall face.", "app": "SketchUp 2026", "details": "A tall selected or active wall face remained centered; the distance readout changed during the interaction."}, {"start_s": 2945.602, "end_s": 2956.696, "action": "Navigated through the SketchUp model with repeated scrolling and middle-button orbiting, moving from a close wall view to a wider view of the floor plan and building layout.", "intent": "Review the model from broader viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the main floor plan and a separate plan above it."}, {"start_s": 2956.696, "end_s": 2967.119, "action": "Orbited and zoomed around the 3D building model, changing from an overhead view to close views of interior rooms and walls.", "intent": "Inspect interior geometry from different angles.", "app": "SketchUp 2026", "details": "The views showed partition walls, door openings, furniture outlines, and room interiors."}, {"start_s": 2967.119, "end_s": 2978.671, "action": "Selected and manipulated a wall face with repeated clicks and short drags, then orbited around it and entered a text character while keeping the face highlighted.", "intent": "Work on or inspect the selected wall face.", "app": "SketchUp 2026", "details": "The wall face remained stippled/highlighted within a bounding outline in the later views."}, {"start_s": 2978.671, "end_s": 2988.273, "action": "Navigated closer to the highlighted wall face, clicked it, and entered measurements of 6 inches and 1 foot, confirming each with Enter.", "intent": "Place or measure guide geometry on the selected wall face.", "app": "SketchUp 2026", "details": "The active guide tool displayed Length values, first 6 inches and later approximately 4 11/16 inches."}, {"start_s": 2988.273, "end_s": 2999.686, "action": "Clicked and dragged on the highlighted wall face, used undo twice, and clicked again while the guide-placement tool remained active.", "intent": "Adjust or undo guide placement on the wall face.", "app": "SketchUp 2026", "details": "The final status bar showed the guide tool and an Area readout of 35 square feet."}, {"start_s": 2999.686, "end_s": 3009.562, "action": "Adjusted the SketchUp view with repeated orbit/scroll input, clicked the model, and entered dimension values including 3 feet 6 inches while placing a guide.", "intent": "Position and dimension a guide on the selected wall geometry.", "app": "SketchUp 2026", "details": "The view changed to a close-up of a selected wall face with the guide tool active."}, {"start_s": 3009.562, "end_s": 3019.243, "action": "Clicked the wall area, entered 1 inch and then a quoted measurement, and orbited/zoomed around the selected face while placing or reviewing guide geometry.", "intent": "Continue positioning guides and checking wall dimensions.", "app": "SketchUp 2026", "details": "The selected wall face remained highlighted and the Length field showed guide measurements."}, {"start_s": 3019.243, "end_s": 3028.365, "action": "Entered 4 feet, orbited and zoomed out to review the room layout, then switched to the rectangle tool and dragged across the selected wall face to create a rectangular division.", "intent": "Create a rectangular feature on the wall using measured dimensions.", "app": "SketchUp 2026", "details": "A green-outlined rectangle appeared on the highlighted wall face."}, {"start_s": 3028.365, "end_s": 3038.501, "action": "Confirmed the rectangle area, navigated around the model with orbit and zoom input, entered text-like tool shortcuts, and selected the resulting wall geometry.", "intent": "Inspect and modify the newly created wall feature.", "app": "SketchUp 2026", "details": "The view moved from the selected wall face to a wider perspective and then a close-up of the wall assembly."}, {"start_s": 3038.501, "end_s": 3047.941, "action": "Orbited and zoomed to another side of the model, selected a face, and used the push/pull tool to extrude or adjust the wall geometry, with the distance field reaching 6 inches.", "intent": "Modify the wall thickness or height with Push/Pull.", "app": "SketchUp 2026", "details": "The selected face and adjacent wall assembly changed as the Push/Pull tool remained active."}, {"start_s": 3047.941, "end_s": 3058.958, "action": "Navigated around the model with orbit and zoom input, selected and adjusted geometry, then opened the File menu and hid the SketchUp window before continuing navigation.", "intent": "Review the completed model from wider views and hide the application.", "app": "SketchUp 2026", "details": "The final screenshots show a zoomed-out apartment layout and a second floor-plan-like structure."}, {"start_s": 3058.958, "end_s": 3067.909, "action": "Navigated around the SketchUp house model by clicking and scrolling, zooming from a full floor-plan view toward the central rooms and furnishings.", "intent": "Inspect the 3D model from closer viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 3067.909, "end_s": 3078.403, "action": "Scrolled extensively through the model, moving into a very close view of floor and wall geometry, then clicked to orbit and changed to the Orbit tool.", "intent": "Reposition the camera to inspect model geometry.", "app": "SketchUp", "details": null}, {"start_s": 3078.403, "end_s": 3088.636, "action": "Scrolled and orbited around a corner containing a plant-like drawing and wall or floor edges, briefly typed tool shortcuts, and clicked and dragged geometry while switching drawing tools.", "intent": "Edit or inspect details at the model corner.", "app": "SketchUp", "details": null}, {"start_s": 3088.636, "end_s": 3098.423, "action": "Entered a dimension value of 3 inches and confirmed it, then selected and manipulated faces around the corner with the Push/Pull tool while orbiting the view.", "intent": "Adjust the dimensions of selected model geometry.", "app": "SketchUp", "details": null}, {"start_s": 3098.423, "end_s": 3109.17, "action": "Continued selecting and scrolling around the corner, used Push/Pull on a narrow wall or face, and dragged the geometry to extend it while the plant drawing remained visible.", "intent": "Extend or modify the selected wall-like geometry.", "app": "SketchUp", "details": null}, {"start_s": 3109.17, "end_s": 3116.737, "action": "Scrolled and clicked to orbit out to a wider view, revealing the modified narrow wall beside the room floor plan and dining table while keeping the Push/Pull tool active.", "intent": "Review the resulting model modification in context.", "app": "SketchUp", "details": null}, {"start_s": 3116.737, "end_s": 3126.727, "action": "Scrolled through the SketchUp model, briefly activated the Push/Pull tool, and clicked or dragged near a wall/floor edge without a clearly visible geometry change.", "intent": "Inspect or adjust model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3126.727, "end_s": 3140.688, "action": "Orbited the SketchUp camera with middle-button clicks and scrolling, changing from a close view to broader overhead views of the floor plan and furnished rooms.", "intent": "Review the 3D model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 3140.688, "end_s": 3150.705, "action": "Scrolled and orbited toward the stair and dining area, then clicked near a small floor-plan object and left it selected or otherwise focused.", "intent": "Inspect a specific element near the stairs.", "app": "SketchUp 2026", "details": null}, {"start_s": 3150.705, "end_s": 3160.445, "action": "Clicked the small rectangular object near the stair edge, navigated by scrolling and orbiting across the model, and selected the object again after repositioning the view near the dining table.", "intent": "Inspect or select repeated model components.", "app": "SketchUp 2026", "details": null}, {"start_s": 3160.445, "end_s": 3171.273, "action": "Scrolled and navigated to a wider upper-floor view, clicked several small rectangular objects, and left the camera showing bedrooms, living areas, and the dining space.", "intent": "Review the layout and inspect model components across the floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 3171.273, "end_s": 3182.947, "action": "Clicked a small rectangular object, used backspace, and continued scrolling to orbit and zoom out to a broad overhead view of the full apartment model.", "intent": "Modify or remove the focused object and review the overall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3182.947, "end_s": 3196.731, "action": "Scrolled through the SketchUp model view while keeping the house interior layout visible.", "intent": "Inspect the 3D house model from the current view.", "app": "SketchUp", "details": null}, {"start_s": 3196.731, "end_s": 3206.517, "action": "Continued scrolling to adjust the model view, bringing the left rooms and central dining area closer into view.", "intent": "Navigate the 3D model for closer inspection.", "app": "SketchUp", "details": null}, {"start_s": 3206.517, "end_s": 3217.707, "action": "Scrolled and used middle-click navigation to zoom and reposition the camera from the overall floor plan toward the dining area and adjacent rooms.", "intent": "Examine a more detailed section of the house model.", "app": "SketchUp", "details": null}, {"start_s": 3217.707, "end_s": 3232.251, "action": "Scrolled to zoom back and reposition the camera, restoring a broader view of the dining area, stairs, living area, and surrounding rooms.", "intent": "Review the surrounding house layout.", "app": "SketchUp", "details": null}, {"start_s": 3232.251, "end_s": 3242.965, "action": "Scrolled into the corner by the doorway and plants, clicked the geometry, typed \u201cp,\u201d and selected the Push/Pull tool; the view ended focused on the corner geometry with a distance readout.", "intent": "Begin modifying selected model geometry with Push/Pull.", "app": "SketchUp", "details": "Push/Pull tool was active at the end of the span."}, {"start_s": 3242.965, "end_s": 3253.245, "action": "Used middle-click navigation and scrolling to orbit and reposition around the selected corner geometry, then clicked the wall/face while keeping Push/Pull active.", "intent": "Inspect and prepare the selected wall geometry for a 3D edit.", "app": "SketchUp", "details": "The selected geometry remained highlighted with Push/Pull distance readouts visible."}, {"start_s": 3253.245, "end_s": 3262.581, "action": "Used the active SketchUp tool to click and adjust a wall face, extending the selected rectangular wall element; repositioned the view slightly with scrolling.", "intent": "Modify the wall geometry and inspect the result.", "app": "SketchUp 2026", "details": "The wall element appears taller/extended by the end of the span, with the tool distance changing from about 3' 1 5/8\" to 9 9/16\"."}, {"start_s": 3262.581, "end_s": 3268.705, "action": "Scrolled and orbited around the model, changing from a close wall view to an elevated overview of the rectangular wall enclosure; clicked to inspect a face.", "intent": "Review the edited enclosure from different angles.", "app": "SketchUp 2026", "details": "The view shows the enclosure from above with its bounding edges visible."}, {"start_s": 3268.705, "end_s": 3278.332, "action": "Scrolled and orbited around the same wall enclosure, settling on a higher angled view while keeping the editing tool active.", "intent": "Continue inspecting the modeled wall geometry.", "app": "SketchUp 2026", "details": "No clearly visible geometry change occurred during this interval."}, {"start_s": 3278.332, "end_s": 3288.682, "action": "Scrolled and orbited away from the close enclosure to a broader overhead floor-plan view, then clicked within the model and changed to the Select tool.", "intent": "Navigate to and review a broader area of the house model.", "app": "SketchUp 2026", "details": "The view transitions from the small enclosure to multiple rooms, walls, furniture outlines, and circulation areas."}, {"start_s": 3288.682, "end_s": 3300.053, "action": "Clicked and dragged on model geometry, entered the letter p, and continued scrolling and orbiting around a wall; selected a wall face and returned to the face-editing tool.", "intent": "Select and inspect another wall element for possible editing.", "app": "SketchUp 2026", "details": "The final view shows a long wall near a dining area with the face-editing tool active and a distance readout of about 5' 11 7/8\"."}, {"start_s": 3300.053, "end_s": 3309.974, "action": "Scrolled and orbited through the interior model, dragged on a wall edge or face, and clicked additional geometry near the dining area and adjacent rooms.", "intent": "Inspect and adjust interior wall geometry while navigating the floor plan.", "app": "SketchUp 2026", "details": "The camera moves from an elevated overview to a closer view of walls, door openings, and a dining table; no definite final geometry change is visible."}, {"start_s": 3309.974, "end_s": 3320.07, "action": "Selected and adjusted a wall face with Push/Pull, entering small text inputs and clicking or dragging around the model while navigating the view.", "intent": "Modify the wall geometry and inspect the result.", "app": "SketchUp 2026", "details": "Push/Pull was active; the selected face showed a distance of approximately 6 7/8 inches."}, {"start_s": 3320.07, "end_s": 3330.052, "action": "Navigated around the 3D model with orbit and zoom gestures, then selected and adjusted another wall face with Push/Pull near the dining area.", "intent": "Continue shaping wall geometry while inspecting the surrounding floor plan.", "app": "SketchUp 2026", "details": "The selected face showed a Push/Pull distance of approximately 5 6/8 inches, later changing to about 2 9/16 inches."}, {"start_s": 3330.052, "end_s": 3340.858, "action": "Zoomed and orbited out to review the room layout, selected a tall wall face, and left the model in an elevated overview of the interior.", "intent": "Inspect the modified wall and its placement within the house model.", "app": "SketchUp 2026", "details": "A tall wall face was highlighted during Push/Pull operations before the view changed to orbit navigation."}, {"start_s": 3340.858, "end_s": 3352.038, "action": "Orbited and zoomed around the house model, moving from an interior room view to a broader top-down and exterior overview of the floor plan.", "intent": "Review the overall model and room arrangement from multiple viewpoints.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; the interval primarily contained camera navigation."}, {"start_s": 3352.038, "end_s": 3362.171, "action": "Continued orbiting and zooming through the model, inspecting walls, openings, and furnished rooms from elevated and angled viewpoints.", "intent": "Examine the house layout and wall placement from different perspectives.", "app": "SketchUp 2026", "details": "The view moved across multiple rooms and ended near a group of interior wall segments."}, {"start_s": 3362.171, "end_s": 3372.116, "action": "Zoomed into a narrow gap between wall elements and repeatedly clicked along the central wall faces or edges, leaving a close-up inspection view.", "intent": "Inspect or select closely spaced wall geometry.", "app": "SketchUp 2026", "details": "The final view showed a narrow vertical wall assembly with a blue-highlighted edge."}, {"start_s": 3372.116, "end_s": 3381.602, "action": "Scrolled and clicked through the close-up SketchUp model, selecting faces and using the active push/pull tool to adjust a narrow wall or ledge section.", "intent": "Modify a small architectural face in the model.", "app": "SketchUp 2026", "details": "A selected face and push/pull distance field were visible."}, {"start_s": 3381.602, "end_s": 3391.575, "action": "Orbited and zoomed around the wall assembly, clicked a top face, and applied a push/pull adjustment while entering a short distance value.", "intent": "Refine the height or shape of the wall assembly.", "app": "SketchUp 2026", "details": "The model view shifted to show adjacent partition walls and a selected top face."}, {"start_s": 3391.575, "end_s": 3401.51, "action": "Clicked and adjusted another small face in the wall junction, then scrolled to inspect the resulting geometry from a closer angle.", "intent": "Continue editing the partition junction.", "app": "SketchUp 2026", "details": "A small top face was selected and the push/pull tool remained active."}, {"start_s": 3401.51, "end_s": 3411.682, "action": "Scrolled and clicked the upper face of a wall element, entered a push/pull distance, and attempted to offset the geometry; SketchUp displayed an \u201cOffset limited to 7\u201d warning before the view shifted.", "intent": "Adjust the wall element while checking the tool\u2019s geometric limit.", "app": "SketchUp 2026", "details": "The visible warning read \u201cOffset limited to 7\u201d and the distance field showed 7 inches."}, {"start_s": 3411.682, "end_s": 3421.402, "action": "Orbited and zoomed away from the edited junction, selected an edge or narrow ledge, and navigated out to a broader view of the floor plan.", "intent": "Inspect the edited area in the context of the full model.", "app": "SketchUp 2026", "details": "The view progressed from a close-up ledge to an overview of the house layout."}, {"start_s": 3421.402, "end_s": 3429.275, "action": "Zoomed and orbited around the overall floor plan, clicked and dragged within the model, and ended on a closer overhead view of interior partitions, stairs, and a dining area.", "intent": "Review the model layout after the local edits.", "app": "SketchUp 2026", "details": "The final view showed interior walls, stairs, and furniture outlines."}, {"start_s": 3429.275, "end_s": 3439.446, "action": "Orbited and zoomed around the interior wall area, selected a face, and activated Push/Pull; entered \u201cp\u201d while adjusting the view and tool state.", "intent": "Inspect and modify an interior wall face.", "app": "SketchUp 2026", "details": null}, {"start_s": 3439.446, "end_s": 3449.371, "action": "Navigated through the 3D house model with orbit and zoom gestures, moving from a close wall view to a wider overhead view and then toward another wall section.", "intent": "Review the model layout and reposition the camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 3449.371, "end_s": 3457.151, "action": "Continued orbiting and zooming around the house, pulling back to show most of the floor plan before moving into a closer view of the central walls and stairs.", "intent": "Inspect the overall model and central interior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3457.151, "end_s": 3467.298, "action": "Zoomed and orbited across the stair and adjacent room area, then selected a wall or floor face near the left side of the model.", "intent": "Examine and select geometry around the stair and room boundary.", "app": "SketchUp 2026", "details": null}, {"start_s": 3467.298, "end_s": 3477.318, "action": "Clicked repeatedly on the selected wall area while orbiting and zooming; left a wall face highlighted in a closer view.", "intent": "Select or inspect a specific wall face in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3477.318, "end_s": 3487.369, "action": "Zoomed out to review the complete house layout, then zoomed back toward the central wall group and selected a vertical wall face.", "intent": "Review the model and focus on a particular interior wall face.", "app": "SketchUp 2026", "details": null}, {"start_s": 3487.369, "end_s": 3498.738, "action": "Orbited and zoomed the SketchUp model around the furnished interior, moving from an overhead room view to a close view of walls and furniture.", "intent": "Inspect the interior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 3498.738, "end_s": 3508.312, "action": "Orbited and zoomed toward a narrow gap between interior wall panels, repeatedly clicking near the wall geometry while adjusting the view.", "intent": "Inspect or target geometry in the wall assembly.", "app": "SketchUp 2026", "details": null}, {"start_s": 3508.312, "end_s": 3518.152, "action": "Selected a narrow wall face, activated the Push/Pull tool, and adjusted the view while manipulating the face; the model ended on a wider interior perspective.", "intent": "Modify or inspect the selected wall face.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and showed a distance readout during the operation."}, {"start_s": 3518.152, "end_s": 3528.767, "action": "Navigated rapidly outward through the model with zooming and clicks, transitioning from a close wall view to an overview showing multiple building layouts and floor plans.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 3528.767, "end_s": 3539.287, "action": "Orbited and zoomed back into the furnished interior, moving across living areas and partitions to inspect the rooms from several angles.", "intent": "Inspect interior layout and furnishings.", "app": "SketchUp 2026", "details": null}, {"start_s": 3539.287, "end_s": 3549.352, "action": "Continued orbiting and zooming through the interior, panning across walls, a dining table, bathroom fixtures, and adjacent seating areas.", "intent": "Continue reviewing the interior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 3549.352, "end_s": 3560.284, "action": "Navigated the SketchUp house model with middle-clicks and scroll gestures, shifting the 3D view across the furnished rooms.", "intent": "Inspect the architectural model from a different angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 3560.284, "end_s": 3570.115, "action": "Orbited and zoomed the SketchUp model with middle-clicks and scroll gestures, moving from a close room view to a broader view of the floor plan and furnishings.", "intent": "Review the overall interior layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 3570.115, "end_s": 3579.884, "action": "Continued orbiting and zooming around the house model, then pulled back to show the main building alongside a separate simpler structure.", "intent": "Compare the modeled structures in the scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 3579.884, "end_s": 3588.864, "action": "Navigated through close views of bedrooms, bathrooms, walls, and openings using middle-clicks and scroll gestures, ending at an exterior-side view of the model.", "intent": "Inspect room details and exterior wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3588.864, "end_s": 3599.119, "action": "Zoomed and orbited back toward a wider perspective of the two structures, then rotated to a closer view of the house walls and interior partitions.", "intent": "Review the building layout from multiple perspectives.", "app": "SketchUp 2026", "details": null}, {"start_s": 3599.119, "end_s": 3609.347, "action": "Orbited and zoomed around the house, inspecting interior partitions and stairs before pulling back to a wide view showing the complete main structure and the separate structure.", "intent": "Complete a broad visual inspection of the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3609.347, "end_s": 3619.765, "action": "Orbited the SketchUp model with repeated middle-button navigation and scrolling, changing the view across the interior floor plan and walls.", "intent": "Inspect the 3D model from different angles.", "app": "SketchUp", "details": null}, {"start_s": 3619.765, "end_s": 3629.909, "action": "Navigated and zoomed closely into a wall or floor area, switched to selection, and clicked a narrow face until it became highlighted.", "intent": "Select a specific model face for editing.", "app": "SketchUp", "details": "The narrow rectangular face is highlighted at the end."}, {"start_s": 3629.909, "end_s": 3639.615, "action": "Selected the narrow face, activated Push/Pull, and entered 10' to extend the face into a tall rectangular wall; continued navigating around the resulting geometry.", "intent": "Create or enlarge a wall element to a specified height.", "app": "SketchUp", "details": "The Push/Pull distance field shows 10' and the extended face is visible."}, {"start_s": 3639.615, "end_s": 3650.292, "action": "Kept the Push/Pull tool active while orbiting and zooming around the extended wall, inspecting its position relative to the surrounding floor-plan elements.", "intent": "Review the newly extended wall in context.", "app": "SketchUp", "details": "The distance field remains visible while the camera moves around the model."}, {"start_s": 3650.292, "end_s": 3659.242, "action": "Selected another face near the floor plan, adjusted it with Push/Pull to a short distance, and then orbited and zoomed out to review the wall and broader model.", "intent": "Modify a second wall or face and inspect the updated layout.", "app": "SketchUp", "details": "The selected face shows a Push/Pull distance of 6\" before the view is zoomed out."}, {"start_s": 3659.242, "end_s": 3668.896, "action": "Navigated around the model with orbiting and zooming, briefly used keyboard input while Push/Pull remained active, then switched back to selection and continued inspecting the floor plan and walls.", "intent": "Review the edited architectural model from multiple viewpoints.", "app": "SketchUp", "details": "The final view shows the interior layout with walls, kitchen fixtures, dining furniture, and room outlines."}, {"start_s": 3668.896, "end_s": 3678.649, "action": "Navigated around the SketchUp model with repeated view adjustments, then activated the Orbit tool and rotated the camera around the wall and snowflake-like floor detail.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 3678.649, "end_s": 3688.726, "action": "Adjusted the camera around the floor plan and wall, clicked and dragged on the model, and briefly entered a tool or text state while repositioning the view.", "intent": "Refine the viewpoint and inspect nearby model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3688.726, "end_s": 3696.719, "action": "Zoomed and orbited across the kitchen and adjacent floor-plan area, selected a wall face, and activated Push/Pull to begin adjusting the wall geometry.", "intent": "Inspect and modify the wall or nearby architectural geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3696.719, "end_s": 3707.696, "action": "Continued navigating around the wall with zoom and orbit adjustments, selected wall faces, and used Push/Pull to change the visible wall height or extrusion.", "intent": "Adjust the wall geometry while checking it against the surrounding floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 3707.696, "end_s": 3717.643, "action": "Zoomed out and orbited to reveal more of the apartment layout, clicked the wall and nearby model areas, and continued using the active Push/Pull workflow on the wall.", "intent": "Review the wall modification in the context of the larger model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3717.643, "end_s": 3727.359, "action": "Navigated to a broad overhead view of the apartment, then zoomed back toward the edited wall and clicked its face while continuing the Push/Pull tool.", "intent": "Review the overall model and continue refining the selected wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 3727.359, "end_s": 3737.366, "action": "Orbit and zoom around the SketchUp model while using Push/Pull on a selected wall face, changing the camera from a close wall view to another side of the structure.", "intent": "Inspect and adjust the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": "Push/Pull tool remained active and the selected wall face changed appearance during navigation."}, {"start_s": 3737.366, "end_s": 3748.7, "action": "Orbit and zoom out from the close wall view to inspect the overall multi-room floor plan, then move back toward the dining and kitchen area.", "intent": "Review the building layout and navigate to another interior area.", "app": "SketchUp 2026", "details": "The model transitioned from a distant whole-building view to a closer top-down interior view."}, {"start_s": 3748.7, "end_s": 3759.66, "action": "Orbit and zoom across the building, moving from the dining area and interior walls toward another room and bathroom section.", "intent": "Inspect different rooms and wall arrangements in the 3D model.", "app": "SketchUp 2026", "details": "Camera views shifted through several top-down and angled perspectives without a clearly confirmed geometry edit."}, {"start_s": 3759.66, "end_s": 3767.949, "action": "Navigate to a close-up exterior corner with a plant-like line drawing, switch among drawing tools, and click near the wall and ground edge while briefly entering keyboard input.", "intent": "Work on or inspect geometry around the exterior corner detail.", "app": "SketchUp 2026", "details": "A close-up corner and plant symbol were visible; the active tool changed between selection and drawing-related tools."}, {"start_s": 3767.949, "end_s": 3777.788, "action": "Zoom far out to view the separate building components, then orbit and zoom back toward the exterior corner and plant detail.", "intent": "Compare the overall model arrangement and return to the corner detail.", "app": "SketchUp 2026", "details": "The scene briefly showed multiple separated building groups before returning to the close corner view."}, {"start_s": 3777.788, "end_s": 3788.385, "action": "Select the small ground face beside the wall, open its context menu, and enter keyboard input including p, 3, and Enter; then activate Push/Pull and select the face, leaving it highlighted with a zero distance.", "intent": "Prepare and begin modifying the selected ground or threshold face.", "app": "SketchUp 2026", "details": "The final view shows the face selected with the Push/Pull cursor and Distance 0\"."}, {"start_s": 3788.385, "end_s": 3797.311, "action": "Clicked and scrolled around the model while using Push/Pull, then adjusted the view to show a tall wall or panel near the doorway.", "intent": "Modify or inspect the selected architectural face.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active and the selected vertical face was shown with a distance readout."}, {"start_s": 3797.311, "end_s": 3807.244, "action": "Scrolled and orbited around the model, clicked near the base of the selected wall, and ended with a broader view of the doorway and surrounding floor plan.", "intent": "Inspect the wall geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The selected vertical face remained visible while the camera moved from a close-up to an overhead perspective."}, {"start_s": 3807.244, "end_s": 3814.035, "action": "Clicked and dragged around the model, orbited to a top-down view, and switched back to selection near the end of the span.", "intent": "Review the edited architectural area and reposition the camera.", "app": "SketchUp 2026", "details": "The view changed from the wall close-up to a floor-plan overview with rooms and door swings visible."}, {"start_s": 3814.035, "end_s": 3828.155, "action": "Continuously scrolled to zoom far out from the floor plan, revealing multiple building sections and then a distant overall model view.", "intent": "Navigate and inspect the broader model layout.", "app": "SketchUp 2026", "details": "No distinct geometry edit was visible; the span primarily consisted of repeated scroll-based zooming."}, {"start_s": 3828.155, "end_s": 3837.381, "action": "Scrolled and orbited around the distant model, then clicked the left building section several times to select or inspect it.", "intent": "Reorient the view and inspect a separate building section.", "app": "SketchUp 2026", "details": "The model was shown from a distant overview before the camera moved to an elevated close view of the left structure."}, {"start_s": 3837.381, "end_s": 3848.121, "action": "Clicked repeatedly on the wall area, entered brief keyboard input, orbited and zoomed the camera, and clicked the upper wall edge to select geometry.", "intent": "Select and inspect the wall geometry from a closer angle.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the wall and its top edge with the surrounding floor plan faintly visible."}, {"start_s": 3848.121, "end_s": 3858.141, "action": "Navigated around the SketchUp house model by clicking, scrolling, and orbiting; changed from an overhead room view to a close view of the partition walls.", "intent": "Inspect the 3D architectural model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 3858.141, "end_s": 3867.601, "action": "Continued orbiting, panning, and zooming through the house model, moving from the partition walls toward a floor-plan area and doorway.", "intent": "Review additional model geometry and room layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 3867.601, "end_s": 3880.513, "action": "Scrolled and orbited while viewing a very close-up section of the model, ending on a narrow wall and adjacent surface.", "intent": "Examine model geometry at close range.", "app": "SketchUp 2026", "details": null}, {"start_s": 3880.513, "end_s": 3890.422, "action": "Used the orbit and navigation controls to pull back from the close-up, then switched to a guide-related tool and positioned it over the model.", "intent": "Adjust the view and prepare or inspect a guide placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 3890.422, "end_s": 3902.064, "action": "Continued orbiting, panning, and zooming across the floor-plan model, moving past a room with a rug and bathroom fixtures to another area with a sink and plant detail.", "intent": "Inspect different areas of the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3902.064, "end_s": 3912.768, "action": "Scrolled and orbited into an extreme close-up of the floor-plan details, ending focused on a plant-like drawing beside the wall and sink area; entered a single character near the end.", "intent": "Continue close inspection of model details.", "app": "SketchUp 2026", "details": "The final typed character was not sufficient to identify a specific command or edit."}, {"start_s": 3912.768, "end_s": 3922.968, "action": "Navigated around the SketchUp model with repeated middle-button view movements and scrolling, changing from a close-up floor detail to a distant overview of the furnished layout.", "intent": "Inspect different areas and scales of the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 3922.968, "end_s": 3932.977, "action": "Orbited and zoomed through the interior model, moving from an overall view to a closer view of walls, rooms, and floor details; selected a small floor face near the end.", "intent": "Examine the interior geometry and locate a specific face.", "app": "SketchUp 2026", "details": null}, {"start_s": 3932.977, "end_s": 3943.342, "action": "Selected a floor face, activated Push/Pull, entered 18, and confirmed it to extrude the face into a rectangular block; continued navigating and selected another face.", "intent": "Create or adjust 3D geometry using a measured extrusion.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly showed 18."}, {"start_s": 3943.342, "end_s": 3954.251, "action": "Scrolled and orbited around the newly extruded wall-like block, then selected a face or edge near its base while keeping the surrounding floor-plan details visible.", "intent": "Inspect the extrusion from multiple angles and prepare another geometry operation.", "app": "SketchUp 2026", "details": null}, {"start_s": 3954.251, "end_s": 3964.131, "action": "Selected and manipulated geometry around the block with clicks and a brief drag, then orbited and zoomed to reveal a long, narrow wall segment extending toward the adjacent room layout.", "intent": "Refine or inspect the modeled wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 3964.131, "end_s": 3974.627, "action": "Navigated toward another interior wall section, selected faces and edges repeatedly, and ended with a vertical edge highlighted on a short wall panel.", "intent": "Inspect and select the next wall element for possible editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 3974.627, "end_s": 3985.317, "action": "Orbited and zoomed around the SketchUp floor-plan model, moving the camera from an overhead room view to a closer view of the bathroom and adjacent rug area.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 3985.317, "end_s": 4005.103, "action": "Continued orbiting, panning, and zooming around the floor-plan model, focusing on the bedroom, doorway, wall, and rug area.", "intent": "Review model geometry and spatial details.", "app": "SketchUp 2026", "details": null}, {"start_s": 4005.103, "end_s": 4017.377, "action": "Switched briefly through the desktop and returned to SketchUp, then orbited and zoomed around the doorway, wall, plant, and rug region.", "intent": "Continue inspecting the model from a new viewpoint.", "app": "SketchUp 2026", "details": "A brief app switch and system-status transition occurred near the start of the span."}, {"start_s": 4017.377, "end_s": 4026.743, "action": "Navigated to a close-up wall section, drew a rectangular face, and used Push/Pull to extrude it into a raised rectangular block.", "intent": "Create or modify a 3D architectural element.", "app": "SketchUp 2026", "details": "The rectangle was shown selected before extrusion; the resulting distance displayed was approximately 4 1/8 inches."}, {"start_s": 4026.743, "end_s": 4036.765, "action": "Zoomed and adjusted the view around the new block, repeatedly clicked its faces, and opened its context menu for editing options.", "intent": "Inspect and prepare the newly created geometry for further editing.", "app": "SketchUp 2026", "details": "The context menu visibly included Entity Info, Erase, Hide, Make Component, Make Group, and related face-editing commands."}, {"start_s": 4036.765, "end_s": 4047.165, "action": "Selected the small block, adjusted the camera, and used Push/Pull to extend the geometry upward while viewing the wider floor plan.", "intent": "Modify the created architectural element and inspect its placement.", "app": "SketchUp 2026", "details": "The final view showed the extended narrow vertical element above the surrounding floor-plan model."}, {"start_s": 4047.165, "end_s": 4057.238, "action": "Navigated around the SketchUp model with repeated middle-button orbiting and scrolling, selected geometry, and entered measurements including \u201c10'\u201d in the value field.", "intent": "Adjust and inspect the model geometry from different viewpoints.", "app": "SketchUp 2026", "details": "Viewed a close-up of a wall or vertical element near a floor opening."}, {"start_s": 4057.238, "end_s": 4065.859, "action": "Scrolled and clicked several model faces, then used Push/Pull on a selected vertical face; entered or adjusted distances visible in the value field, including approximately 1'6\".", "intent": "Modify the thickness or position of a vertical architectural element.", "app": "SketchUp 2026", "details": "A tall face was selected and visibly extended with Push/Pull."}, {"start_s": 4065.859, "end_s": 4076.047, "action": "Continued orbiting and zooming around the model, selected additional faces and edges, and applied further Push/Pull adjustments to the vertical wall elements.", "intent": "Refine the modeled wall geometry while inspecting its base and surrounding floor.", "app": "SketchUp 2026", "details": "The view shifted from the wall base to the patterned floor area and adjacent vertical faces."}, {"start_s": 4076.047, "end_s": 4086.061, "action": "Zoomed and orbited out to review the surrounding interior layout, then selected and manipulated another wall face with Push/Pull, leaving a distance of about 6\" visible.", "intent": "Continue editing the architectural partition and check its placement in the room.", "app": "SketchUp 2026", "details": "The model view revealed nearby room outlines, fixtures, and floor patterns."}, {"start_s": 4086.061, "end_s": 4096.503, "action": "Scrolled extensively through the model, clicked geometry, and orbited to a wider overhead view showing multiple rooms and furnishings.", "intent": "Inspect the edited structure in relation to the broader floor plan.", "app": "SketchUp 2026", "details": "Ended with a wider view of the interior plan and the edited vertical element."}, {"start_s": 4096.503, "end_s": 4106.369, "action": "Orbited and zoomed back toward the partition, clicked several faces, and continued Push/Pull-style edits while inspecting the wall base and adjacent floor area.", "intent": "Make final local adjustments to the partition and review the resulting geometry.", "app": "SketchUp 2026", "details": "Finished on a close view of the wall edge beside a patterned floor strip and room fixtures."}, {"start_s": 4106.369, "end_s": 4116.385, "action": "Navigated around the SketchUp model with repeated middle-button orbit/pan actions and zoom scrolling, then clicked several wall or floor faces while the Push/Pull tool remained active.", "intent": "Inspect and modify selected architectural faces in the 3D model.", "app": "SketchUp 2026", "details": "The view shifted between close-ups of walls, floor outlines, and fixtures; the Push/Pull distance field showed changing measurements."}, {"start_s": 4116.385, "end_s": 4126.127, "action": "Zoomed and orbited around the base of a wall, selected a face, and dragged across nearby model geometry before continuing to inspect adjacent floor and wall areas.", "intent": "Adjust or review wall geometry from different viewpoints.", "app": "SketchUp 2026", "details": "A wall face was visibly selected with the Push/Pull cursor and a distance value displayed."}, {"start_s": 4126.127, "end_s": 4136.364, "action": "Orbited and zoomed around the wall assembly, clicked and dragged on model faces, then zoomed out to reveal more of the room layout and surrounding walls.", "intent": "Review the edited structure in a broader 3D context.", "app": "SketchUp 2026", "details": "The final view showed multiple rooms, partial walls, floor-plan linework, and fixtures."}, {"start_s": 4136.364, "end_s": 4148.201, "action": "Continued orbiting and zooming around the interior, moving from a close wall view to an elevated overview of several rooms and partitions.", "intent": "Inspect the overall architectural arrangement and wall placement.", "app": "SketchUp 2026", "details": "The model displayed multiple white partition walls, room outlines, beds, and floor details."}, {"start_s": 4148.201, "end_s": 4157.993, "action": "Zoomed and orbited upward around the partition walls, alternating between closer and wider views of the upper wall edges and room layout.", "intent": "Examine the wall assembly from elevated viewpoints.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; the activity primarily repositioned the camera."}, {"start_s": 4157.993, "end_s": 4167.866, "action": "Orbited and zoomed progressively outward, transitioning from a room-level view to a broad overhead view of the complete floor plan and multiple wall groups.", "intent": "Review the full model layout after the preceding edits.", "app": "SketchUp 2026", "details": "The final view showed a wider building layout with several rooms, partitions, fixtures, and surrounding model geometry."}, {"start_s": 4167.866, "end_s": 4178.481, "action": "Orbited and zoomed extensively around the SketchUp house model, moving from an overall floor-plan view to a close-up of wall and floor geometry.", "intent": "Inspect the model from different angles and distances.", "app": "SketchUp 2026", "details": "Middle-button navigation dominated the span."}, {"start_s": 4178.481, "end_s": 4192.407, "action": "Continued orbiting and zooming around the close-up wall and floor geometry, ending with a slightly shifted view of the same corner.", "intent": "Examine model geometry in detail.", "app": "SketchUp 2026", "details": "No visible geometry edits occurred."}, {"start_s": 4192.407, "end_s": 4202.296, "action": "Scrolled and adjusted the camera around the wall corner and surrounding floor outlines, then clicked while maintaining the close-up inspection.", "intent": "Navigate and inspect the selected area of the model.", "app": "SketchUp 2026", "details": "The view remained focused on architectural linework and wall surfaces."}, {"start_s": 4202.296, "end_s": 4212.398, "action": "Scrolled and entered the letter \"r\" followed by a space, clicked the model, and continued navigation; the view zoomed out to show two separate floor-plan structures.", "intent": "Navigate the model and interact with the drawing tools.", "app": "SketchUp 2026", "details": "A rectangular outline was visibly active during part of the span, with dimensions shown as 4\" x 35/16\"."}, {"start_s": 4212.398, "end_s": 4221.978, "action": "Orbited and zoomed from the wider model view into the furnished house interior, ending on a closer view of the living area, kitchen, and adjacent doorway.", "intent": "Inspect the interior layout and furnishings.", "app": "SketchUp 2026", "details": "Middle-button camera navigation continued throughout."}, {"start_s": 4221.978, "end_s": 4234.037, "action": "Navigated around the house model with repeated orbiting and zooming, briefly viewing a close-up floor and wall area before zooming back to an overall view of the main house and a separate floor-plan structure.", "intent": "Review the overall model arrangement and interior geometry.", "app": "SketchUp 2026", "details": "No definite modeling change was visible."}, {"start_s": 4234.037, "end_s": 4244.249, "action": "Scrolled and adjusted the SketchUp view, then selected geometry and activated a drawing tool near the base of the modeled wall.", "intent": "Refine the view and prepare geometry for editing.", "app": "SketchUp 2026", "details": "The view changed from a close corner detail to a small selected rectangular face near the wall base."}, {"start_s": 4244.249, "end_s": 4254.69, "action": "Selected the rectangular face, opened its context menu, switched to Push/Pull, and entered 18 inches to modify the face.", "intent": "Extrude the selected face by a specified distance.", "app": "SketchUp 2026", "details": "The selected face was pushed/pulled and the camera zoomed out to show the resulting small extrusion."}, {"start_s": 4254.69, "end_s": 4264.984, "action": "Selected a vertical face and used Push/Pull to extend it upward, then continued navigating around the model.", "intent": "Raise the wall section to add height.", "app": "SketchUp 2026", "details": "The vertical face remained highlighted while the model changed into a taller narrow wall segment."}, {"start_s": 4264.984, "end_s": 4274.503, "action": "Continued selecting and push/pulling the wall face while orbiting and zooming the SketchUp view outward.", "intent": "Extend and inspect the modeled wall geometry.", "app": "SketchUp 2026", "details": "The selected wall section became taller and the surrounding floor plan and planted/tree symbol came into view."}, {"start_s": 4274.503, "end_s": 4283.989, "action": "Selected additional wall faces and push/pulled them while orbiting and zooming closer around the corner.", "intent": "Continue shaping the wall and inspect its alignment.", "app": "SketchUp 2026", "details": "The camera moved to a close side view of the selected wall edge and adjacent floor geometry."}, {"start_s": 4283.989, "end_s": 4294.012, "action": "Selected and push/pulled another vertical face, then zoomed and orbited out to review the connected wall assembly.", "intent": "Extend the remaining wall section and review the overall result.", "app": "SketchUp 2026", "details": "The final view showed a longer white wall run with a highlighted vertical end face and surrounding floor-plan geometry."}, {"start_s": 4294.012, "end_s": 4305.125, "action": "Orbited and zoomed the SketchUp model around the room and exterior wall, changing from a close wall view to a lower floor-level view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 4305.125, "end_s": 4313.671, "action": "Continued orbiting and zooming around the floor plan, moving from the corner with the plant toward the adjoining walls and doorway.", "intent": "Examine additional areas of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 4313.671, "end_s": 4323.503, "action": "Adjusted the camera with middle-button orbiting and scrolling, then pressed a keyboard shortcut; the view shifted to a wider angled view of the room corner and surrounding walls.", "intent": "Refine the model viewpoint for inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 4323.503, "end_s": 4334.106, "action": "Clicked and scrolled repeatedly to orbit and zoom out, revealing more of the floor layout, curved doorway, perimeter walls, and plant area.", "intent": "Review the room layout from a broader perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 4334.106, "end_s": 4344.187, "action": "Clicked near the floor geometry and adjusted the view, then selected an edge or line, which became highlighted blue.", "intent": "Inspect or select geometry in the model.", "app": "SketchUp 2026", "details": "A floor-plan edge is visibly highlighted blue at the end."}, {"start_s": 4344.187, "end_s": 4353.407, "action": "Zoomed and orbited out to show most of the interior model, then moved back toward the furnished room and clicked a vertical floor-plan edge, leaving it highlighted blue.", "intent": "Survey the overall model and inspect a specific edge.", "app": "SketchUp 2026", "details": "The final view shows the furnished room, adjacent rooms, walls, and a blue-selected edge."}, {"start_s": 4353.407, "end_s": 4362.247, "action": "Scrolled and orbited the SketchUp model, moving from a close overhead room view to a wider angled view of the apartment layout.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 4362.247, "end_s": 4370.611, "action": "Continued orbiting and zooming around the SketchUp model, then moved to a closer overhead view showing the bedroom, dining area, kitchen, and surrounding walls.", "intent": "Review the overall interior layout and geometry.", "app": "SketchUp", "details": null}, {"start_s": 4370.611, "end_s": 4380.487, "action": "Navigated to an exterior corner of the model, activated a drawing tool, placed a small rectangular face near the wall, and opened its context menu.", "intent": "Create or edit a small geometric element in the model.", "app": "SketchUp", "details": "The context menu showed options including Erase, Hide, Select, Make Component, Make Group, and Create Comment."}, {"start_s": 4380.487, "end_s": 4390.047, "action": "Selected the new geometry, switched to Push/Pull, and entered 10 feet, extending the selected face into a tall rectangular wall or column.", "intent": "Extrude the selected face to add vertical geometry.", "app": "SketchUp", "details": "The Push/Pull distance field displayed 10 feet during the extrusion."}, {"start_s": 4390.047, "end_s": 4398.09, "action": "Continued using Push/Pull on the tall geometry, adjusting the selected face and changing the extrusion distance while viewing the model from nearby angles.", "intent": "Refine the dimensions of the newly extruded wall or column.", "app": "SketchUp", "details": "Visible distance values included 6 inches and approximately 5 3/16 inches."}, {"start_s": 4398.09, "end_s": 4409.55, "action": "Zoomed far out and orbited around the model, then returned to an angled view of the bedroom and the newly added wall element.", "intent": "Inspect the edited geometry within the larger model.", "app": "SketchUp", "details": null}, {"start_s": 4409.55, "end_s": 4420.144, "action": "Adjusted the SketchUp view with repeated scrolls and clicks, then used the Push/Pull tool on a wall or face while navigating across the interior model.", "intent": "Modify or inspect an architectural wall element in the 3D model.", "app": "SketchUp 2026", "details": "The view changed from a furnished interior close-up to a different interior area; the Push/Pull distance field was visible."}, {"start_s": 4420.144, "end_s": 4430.126, "action": "Orbited and zoomed through the SketchUp model, clicked several faces, and repositioned the camera around a doorway and adjacent room walls.", "intent": "Inspect wall and doorway geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The camera moved from an interior doorway view to a close-up of a wall beside a door and dining area."}, {"start_s": 4430.126, "end_s": 4439.597, "action": "Zoomed out to view much of the floor plan, clicked the model, entered a space character, and continued orbiting and scrolling until returning to a close wall view.", "intent": "Navigate and inspect the overall architectural layout and selected geometry.", "app": "SketchUp 2026", "details": "The model briefly appeared as a broad floor-plan overview before the camera moved back toward exterior-facing walls."}, {"start_s": 4439.597, "end_s": 4450.683, "action": "Orbited and zoomed far out around the building, then moved back toward the exterior walls and an opening with visible floor fixtures.", "intent": "Review the building layout and inspect exterior and interior wall relationships.", "app": "SketchUp 2026", "details": "The view progressed from a distant whole-model perspective to a close exterior wall view."}, {"start_s": 4450.683, "end_s": 4462.688, "action": "Scrolled and navigated along the model exterior, gradually zooming toward a room containing a detailed kitchen or utility floor layout.", "intent": "Inspect the room arrangement and detailed floor fixtures.", "app": "SketchUp 2026", "details": "The camera settled on a close view of a floor plan with cabinet, cooktop, and sink-like linework behind a low wall."}, {"start_s": 4462.688, "end_s": 4472.503, "action": "Orbited and scrolled around the kitchen area and surrounding walls, then pulled back to show a larger cluster of rooms and partitions.", "intent": "Inspect the kitchen area and its relationship to the surrounding floor plan.", "app": "SketchUp 2026", "details": "The final view showed multiple interior partitions and the detailed kitchen layout from an elevated oblique angle."}, {"start_s": 4472.503, "end_s": 4482.626, "action": "Adjusted the SketchUp view with repeated scrolling and clicks, briefly typed and dragged, then orbited around the building model to inspect the walls and rooms from changing angles.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "The view changed from an elevated interior perspective to a lower exterior-facing perspective; an offset-limited warning was visible during the interval."}, {"start_s": 4482.626, "end_s": 4493.677, "action": "Orbited and zoomed the SketchUp camera around the model, moving from a closer room view to a wide view that showed two separate building layouts.", "intent": "Review the overall building arrangement and compare model areas.", "app": "SketchUp 2026", "details": null}, {"start_s": 4493.677, "end_s": 4502.937, "action": "Continued orbiting and zooming through the main building, moving from an elevated room cluster to closer views of interior walls, furniture outlines, doors, and stairs.", "intent": "Inspect interior layout details from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 4502.937, "end_s": 4512.726, "action": "Zoomed in on the stair and landing area, then orbited back out to reframe the broader building and adjacent room layout.", "intent": "Examine the stair area and restore a contextual model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 4512.726, "end_s": 4522.838, "action": "Scrolled and orbited around the model, transitioning from a wide view of both building layouts to close exterior views of the main building walls and rooms.", "intent": "Continue visual inspection of the building exterior and interior arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 4522.838, "end_s": 4535.88, "action": "Orbited and zoomed through the central living and circulation areas, then pulled back to a centered view showing the front wall, interior partitions, furniture outlines, and surrounding rooms.", "intent": "Inspect the central layout and finish on an overview perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 4535.88, "end_s": 4546.232, "action": "Scrolled through the SketchUp model and clicked around the foreground wall and interior partition while adjusting the view.", "intent": "Inspect and navigate the architectural model.", "app": "SketchUp 2026", "details": "Viewed a furnished interior from an elevated exterior angle."}, {"start_s": 4546.232, "end_s": 4555.88, "action": "Selected faces on the foreground wall and used the Push/Pull tool, entering a short character input and changing the wall geometry before zooming out.", "intent": "Modify the wall or partition geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active; selected faces and a distance readout were visible."}, {"start_s": 4555.88, "end_s": 4565.959, "action": "Navigated around the model with repeated orbit and scroll actions, then selected narrow wall faces and adjusted their geometry with Push/Pull.", "intent": "Inspect and refine partition geometry.", "app": "SketchUp 2026", "details": "The view shifted from the exterior wall to close-ups of narrow vertical and horizontal faces."}, {"start_s": 4565.959, "end_s": 4576.073, "action": "Scrolled and selected model elements, entered a space character, dragged across geometry, and then zoomed or orbited out to review the broader floor plan.", "intent": "Review the overall building layout after edits.", "app": "SketchUp 2026", "details": "The view expanded from a close-up wall junction to a wide overhead view of the partitioned building."}, {"start_s": 4576.073, "end_s": 4586.177, "action": "Orbited and zoomed around the building from several exterior angles, inspecting the arrangement of rooms and walls without a clearly visible geometry change.", "intent": "Inspect the completed or current model from different viewpoints.", "app": "SketchUp 2026", "details": "The model was shown first in a wide exterior view and then in a close-up of wall partitions."}, {"start_s": 4586.177, "end_s": 4596.205, "action": "Scrolled and orbited around the model, moving from a close-up doorway and wall area to a distant overall perspective.", "intent": "Review the architectural model and its spatial layout.", "app": "SketchUp 2026", "details": "Ended on a wide view showing the main partitioned building and part of a neighboring structure."}, {"start_s": 4596.205, "end_s": 4605.866, "action": "Navigated around the SketchUp house model by clicking, orbiting, and scrolling, changing the view from a close exterior wall section to a wider view of the building.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 4605.866, "end_s": 4617.272, "action": "Continued orbiting and zooming around the SketchUp model, moving from a close room view to a distant overview of the multi-room floor plan.", "intent": "Review the overall building layout and interior arrangement.", "app": "SketchUp 2026", "details": "System connectivity, power, and memory-status changes were also recorded at the start of the span."}, {"start_s": 4617.272, "end_s": 4633.114, "action": "Paused briefly, then orbited the model and adjusted the view to inspect another cluster of interior rooms and walls from above.", "intent": "Examine additional interior areas of the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 4633.114, "end_s": 4649.443, "action": "Scrolled and navigated closer to an interior room, bringing a doorway, floor fixtures, and adjacent walls into a tighter view.", "intent": "Inspect interior details around the room and doorway.", "app": "SketchUp 2026", "details": null}, {"start_s": 4649.443, "end_s": 4658.96, "action": "Zoomed and orbited further within the room, then clicked and dragged near the floor to select or manipulate a visible line or model element.", "intent": "Inspect and possibly adjust a floor-level model element.", "app": "SketchUp 2026", "details": "A brief keyboard event was recorded, but no text content was visible."}, {"start_s": 4658.96, "end_s": 4668.941, "action": "Navigated back out to a broader model view, orbited and zoomed around the building, and clicked or dragged near the upper room geometry before returning to an interior close-up.", "intent": "Compare the broader building layout with a detailed interior view.", "app": "SketchUp 2026", "details": null}, {"start_s": 4668.941, "end_s": 4679.147, "action": "Orbit and zoom around the SketchUp building model, activate the Tape Measure tool, and place a guide along the visible wall edge while entering partial keyboard input.", "intent": "Position the view and begin measuring or laying out guides on the wall geometry.", "app": "SketchUp 2026", "details": "Visible Length field shows 3' 6\" during guide placement."}, {"start_s": 4679.147, "end_s": 4686.452, "action": "Orbit and zoom closer to the tall wall, click several points, and continue positioning the Tape Measure cursor for guide placement.", "intent": "Inspect the wall and prepare another guide measurement.", "app": "SketchUp 2026", "details": "Tape Measure remains active; the Length field reaches 0\" at the end."}, {"start_s": 4686.452, "end_s": 4695.895, "action": "Enter 2\" and confirm it, then click the wall area to place or adjust the guide.", "intent": "Set a precise guide offset on the wall.", "app": "SketchUp 2026", "details": "The Length field displays 2 after entry."}, {"start_s": 4695.895, "end_s": 4706.036, "action": "Enter another 2\" measurement and confirm it, orbit and zoom around the wall, then enter 3' and confirm while continuing guide placement.", "intent": "Create additional measured guides across the wall surface.", "app": "SketchUp 2026", "details": "The view ends zoomed into the wall with multiple dashed guide lines visible."}, {"start_s": 4706.036, "end_s": 4716.653, "action": "Enter 4' and confirm it, type an additional command, then switch to the Line tool and draw across the guided wall surface.", "intent": "Lay out a measured horizontal line using the construction guides.", "app": "SketchUp 2026", "details": "A solid horizontal line appears across the wall; the Dimensions field shows approximately 3' 2\", 4\"."}, {"start_s": 4716.653, "end_s": 4726.805, "action": "Continue the drawing operation, switch to Push/Pull, and orbit around the model while positioning the tool over the top faces and wall geometry.", "intent": "Begin modifying the modeled geometry after laying out the wall divisions.", "app": "SketchUp 2026", "details": "Push/Pull is active and the Distance field changes from 0\" to approximately 7 3/8\"."}, {"start_s": 4726.805, "end_s": 4734.585, "action": "Navigated around the SketchUp architectural model by clicking, scrolling, and orbiting, changing from a close-up wall view to a wider view of interior partitions.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 4734.585, "end_s": 4744.423, "action": "Scrolled and orbited around the model, moving from a wider view of the partitions into a closer view of the interior wall and floor area.", "intent": "Continue inspecting model geometry and spatial layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 4744.423, "end_s": 4753.592, "action": "Scrolled and orbited to a more frontal view, then opened the Edit menu and moved to the Purge Unused Assets command before returning to the model view.", "intent": "Adjust the view and access model cleanup commands.", "app": "SketchUp 2026", "details": "The Edit menu visibly highlighted Purge Unused Assets."}, {"start_s": 4753.592, "end_s": 4763.579, "action": "Selected the Tape Measure tool and placed or adjusted guide measurements around the walls, including a visible 10-foot length and a selected wall face.", "intent": "Measure and align elements in the model.", "app": "SketchUp 2026", "details": "The status bar showed guide placement and a 10-foot length."}, {"start_s": 4763.579, "end_s": 4774.395, "action": "Continued placing guides on the selected wall and entered a distance of 2 inches, then dragged another guide and entered a second 2-inch measurement.", "intent": "Set precise guide offsets on the wall geometry.", "app": "SketchUp 2026", "details": "The Tape Measure readout showed 2 inches and later approximately 2 7/16 inches."}, {"start_s": 4774.395, "end_s": 4784.312, "action": "Scrolled and placed additional guides on the selected wall, entering 3 inches and then 4 inches while repositioning the measurement endpoints.", "intent": "Add further dimensional guides to the wall.", "app": "SketchUp 2026", "details": "The Tape Measure readout showed 3 inches and later approximately 3 feet 10 7/8 inches."}, {"start_s": 4784.312, "end_s": 4794.225, "action": "Typed briefly, clicked within the model, scrolled, and orbited the SketchUp view to reposition the camera around the wall structure.", "intent": "Adjust the 3D view while inspecting the model.", "app": "SketchUp", "details": "Displayed a close-up of walls and openings, ending on an angled view of the structure."}, {"start_s": 4794.225, "end_s": 4804.133, "action": "Scrolled and orbited around the model, clicked the SketchUp canvas and toolbar, and briefly dragged across geometry to change the viewing position.", "intent": "Inspect and reframe the architectural model.", "app": "SketchUp", "details": "The view changed from a close angled view to a wider overhead view of the room layout."}, {"start_s": 4804.133, "end_s": 4812.897, "action": "Scrolled repeatedly and orbited the SketchUp camera outward to reveal more of the surrounding structures.", "intent": "Review the overall arrangement of the modeled walls.", "app": "SketchUp", "details": "The view widened to show two separate wall-layout models side by side."}, {"start_s": 4812.897, "end_s": 4822.78, "action": "Orbited and scrolled around the model, rotating from a wider overview to another elevated perspective of the wall layout.", "intent": "Continue inspecting the model from different angles.", "app": "SketchUp", "details": "The camera moved across the front and side of the main structure."}, {"start_s": 4822.78, "end_s": 4835.064, "action": "Scrolled and orbited the camera toward the front portion of the main model, bringing the paired openings and interior walls into closer view.", "intent": "Examine the front-facing rooms and openings.", "app": "SketchUp", "details": "Ended on a closer elevated view of the front fa\u00e7ade and adjacent interior partitions."}, {"start_s": 4835.064, "end_s": 4846.383, "action": "Scrolled and orbited outward and upward, then paused before a final middle-click adjustment to settle the overview.", "intent": "Return to an overall inspection view of the model.", "app": "SketchUp", "details": "Ended with both wall-layout models visible in a broad top-down perspective."}, {"start_s": 4846.383, "end_s": 4855.201, "action": "Orbit and zoom around the SketchUp house model, moving from a wide view toward the furnished interior layout.", "intent": "Inspect the 3D house model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 4855.201, "end_s": 4866.256, "action": "Orbit and zoom further into the house interior, repositioning the view across rooms, walls, doors, and furnishings.", "intent": "Examine interior room details and layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 4866.256, "end_s": 4876.323, "action": "Zoom and orbit down to a close overhead view of the kitchen area, bringing the cooktop and sink into focus.", "intent": "Inspect the kitchen fixture arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 4876.323, "end_s": 4885.028, "action": "Click repeatedly on a small object near the kitchen edge, then orbit and zoom to a wider view of the adjacent rooms; leave the object highlighted in blue.", "intent": "Select or inspect a model component near the kitchen.", "app": "SketchUp 2026", "details": null}, {"start_s": 4885.028, "end_s": 4895.933, "action": "Orbit and zoom around the kitchen sink area, switch to the Line tool, and draw a line across the floor/wall area; the green inference line and length readout become visible.", "intent": "Add or position a linear element in the kitchen model.", "app": "SketchUp 2026", "details": "The Line tool shows a length of approximately 3' 6\"."}, {"start_s": 4895.933, "end_s": 4905.729, "action": "Continue the line operation by setting another endpoint to create a long white rectangular-looking element along the kitchen edge, then orbit and zoom closer to the sink.", "intent": "Extend a modeled element along the kitchen counter or wall.", "app": "SketchUp 2026", "details": "The active measurement readout reaches approximately 4' 9\" before the view is repositioned."}, {"start_s": 4905.729, "end_s": 4916.883, "action": "Scrolled and adjusted the SketchUp camera to zoom out from a close interior view to a wider overhead view of the floor plan.", "intent": "Review the 3D floor-plan layout from a broader perspective.", "app": "SketchUp", "details": null}, {"start_s": 4916.883, "end_s": 4926.939, "action": "Typed brief commands and clicked or dragged within the model, then zoomed and activated Push/Pull on a wall face, leaving the wall face selected with a distance readout visible.", "intent": "Modify or inspect a wall component in the SketchUp model.", "app": "SketchUp", "details": "The selected wall face is highlighted and the Push/Pull tool status is visible."}, {"start_s": 4926.939, "end_s": 4935.245, "action": "Scrolled and clicked or dragged around the model, then orbited the camera away from a close wall view to inspect the surrounding rooms and walls.", "intent": "Navigate and review the building model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 4935.245, "end_s": 4943.162, "action": "Scrolled and orbited substantially, transitioning from the interior wall view to a distant overhead perspective showing the main building layout and a separate outlined structure.", "intent": "Review the overall spatial arrangement of the SketchUp model.", "app": "SketchUp", "details": null}, {"start_s": 4943.162, "end_s": 4952.193, "action": "Scrolled and orbited around the main building, moving from the distant overview into closer angled views of the exterior walls, rooms, and openings.", "intent": "Inspect the building exterior and interior layout from multiple angles.", "app": "SketchUp", "details": null}, {"start_s": 4952.193, "end_s": 4960.875, "action": "Scrolled and orbited slightly around the model, maintaining a high angled view of the building walls and openings.", "intent": "Continue reviewing the model from an elevated perspective.", "app": "SketchUp", "details": null}, {"start_s": 4960.875, "end_s": 4970.775, "action": "Orbited and zoomed the SketchUp model around the partitioned interior, changing from a wider overhead view to a close-up of the wall and adjacent opening.", "intent": "Inspect the interior geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 4970.775, "end_s": 4981.159, "action": "Orbited and zoomed around the interior, then selected the large central wall face, leaving it highlighted with a stippled selection pattern.", "intent": "Position the view and select the wall face for editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 4981.159, "end_s": 4991.419, "action": "Activated the Tape Measure tool and entered 6 inches, placing a measurement or guide on the selected wall face.", "intent": "Create a 6-inch measurement or guide on the wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 4991.419, "end_s": 5001.665, "action": "Continued using the Tape Measure tool to place guides on the wall, entering 1 inch and then 3 inches; additional guide lines remained visible across the selected face.", "intent": "Add dimensional reference guides to the wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 5001.665, "end_s": 5011.954, "action": "Entered 4 inches with the Tape Measure tool, then orbited and zoomed the model while keeping the wall and its guide lines in view.", "intent": "Add another wall reference dimension and inspect the result.", "app": "SketchUp 2026", "details": null}, {"start_s": 5011.954, "end_s": 5021.93, "action": "Adjusted the view and used the Rectangle tool to draw a rectangular outline on the wall face, leaving the new rectangle visible in pink selection or preview coloring.", "intent": "Create a rectangular feature or construction outline on the wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 5021.93, "end_s": 5032.307, "action": "Adjusted the SketchUp view with repeated orbit/pan and scroll gestures, moving from a close interior view to a broader view of the building model.", "intent": "Navigate and inspect the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5032.307, "end_s": 5043.418, "action": "Orbited and zoomed out around the model, then interacted with the view until a wider overview of the building layout and interior partitions was visible.", "intent": "Inspect the overall model structure.", "app": "SketchUp 2026", "details": "The status bar briefly indicated an operation to delete dashed guide lines, but no definite deletion result is visible."}, {"start_s": 5043.418, "end_s": 5053.885, "action": "Orbited and zoomed around the central wall section, alternating between wider and closer views of the rectangular opening and surrounding partitions.", "intent": "Examine the central wall and opening from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 5053.885, "end_s": 5063.92, "action": "Clicked around the lower wall edge and adjusted the view; typed \u201cp\u201d and selected a narrow face on the wall corner, leaving the face highlighted with the Push/Pull tool active.", "intent": "Select and prepare to modify a wall face.", "app": "SketchUp 2026", "details": "The selected narrow vertical face is highlighted and the Distance field shows 0\"."}, {"start_s": 5063.92, "end_s": 5073.952, "action": "Orbited and zoomed around the selected wall corner, using undo-like keystrokes and additional clicks while keeping the close-up geometry in view.", "intent": "Inspect or revise the wall-corner geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 5073.952, "end_s": 5083.62, "action": "Navigated slightly around the corner, typed \u201cp,\u201d and clicked the narrow vertical face; left the face selected in Push/Pull mode with a small positive distance shown.", "intent": "Prepare to push or pull the selected wall face.", "app": "SketchUp 2026", "details": "The selected face remains highlighted, and the Distance field reads approximately 1 5/8\"."}, {"start_s": 5083.62, "end_s": 5093.768, "action": "Navigated around the SketchUp model with middle-button orbiting and scrolling, clicked several faces, and left a narrow vertical face selected in the Push/Pull tool.", "intent": "Inspect and position the model for editing the selected wall face.", "app": "SketchUp 2026", "details": "The selected face remained highlighted and the distance field showed approximately 4 1/16 inches."}, {"start_s": 5093.768, "end_s": 5104.358, "action": "Clicked and dragged on the selected narrow face, then used the Push/Pull tool to alter its depth while orbiting slightly around the corner.", "intent": "Adjust the depth of the narrow wall or trim face.", "app": "SketchUp 2026", "details": "The selected face remained visible; the displayed distance changed to approximately 2 1/16 inches."}, {"start_s": 5104.358, "end_s": 5114.242, "action": "Entered brief keyboard inputs and repeatedly clicked the lower portion of the selected face, then orbited and scrolled to inspect the resulting geometry from nearby angles.", "intent": "Continue shaping or checking the selected narrow face.", "app": "SketchUp 2026", "details": "The narrow face stayed selected with Push/Pull active and the distance display reached approximately 3 5/8 inches."}, {"start_s": 5114.242, "end_s": 5124.272, "action": "Clicked the selected face and nearby geometry, dragged to set a Push/Pull endpoint, and orbited the view around the wall corner.", "intent": "Modify the selected face and inspect its placement in the surrounding model.", "app": "SketchUp 2026", "details": "The face remained highlighted; the distance field briefly showed 0 inches before the view shifted."}, {"start_s": 5124.272, "end_s": 5133.757, "action": "Orbited and scrolled around the model, clicked edges and faces near the corner, and began a drag on the right-side geometry.", "intent": "Reposition the view and prepare another geometric adjustment.", "app": "SketchUp 2026", "details": "A tooltip identified an edge as outside the active context, while the narrow face remained selected."}, {"start_s": 5133.757, "end_s": 5143.864, "action": "Scrolled and orbited to a wider view, clicked the corner geometry, and continued positioning around the selected narrow face.", "intent": "Inspect the edited wall corner from a broader perspective.", "app": "SketchUp 2026", "details": "The final view showed the selected vertical face on the corner assembly with the distance field at approximately 9 11/16 inches."}, {"start_s": 5143.864, "end_s": 5153.416, "action": "Adjusted the SketchUp view around the wall model with clicks and scrolling, briefly activated Push/Pull, and ended on a wider view of the room partitions.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "The model remained in an architectural wall layout; no clearly supported dimensional change was visible."}, {"start_s": 5153.416, "end_s": 5163.506, "action": "Navigated around the wall and partition geometry using middle-button view movement and scrolling, then clicked several edges and faces for inspection.", "intent": "Examine wall intersections and partition geometry from different angles.", "app": "SketchUp 2026", "details": "The view moved from an interior corner to a close-up of a partition top edge."}, {"start_s": 5163.506, "end_s": 5173.502, "action": "Selected a narrow top face, activated Push/Pull, and dragged it to extend the face, leaving the distance readout at 7 inches.", "intent": "Modify the selected wall or ledge geometry with Push/Pull.", "app": "SketchUp 2026", "details": "The selected face was visibly highlighted and the Push/Pull tool was active."}, {"start_s": 5173.502, "end_s": 5183.2, "action": "Rotated and zoomed around the building model, selected wall elements, and used a context interaction while inspecting the resulting partition view.", "intent": "Review the edited geometry and surrounding room layout.", "app": "SketchUp 2026", "details": "The camera moved from a close wall view to a broader view of multiple rooms and partitions."}, {"start_s": 5183.2, "end_s": 5192.395, "action": "Navigated outward with middle-button movement and scrolling to review the model, transitioning from a close partition view to an elevated overview of the floor plan.", "intent": "Inspect the overall building layout after the local edit.", "app": "SketchUp 2026", "details": "The final view showed many rooms, walls, openings, and interior fixtures from above."}, {"start_s": 5192.395, "end_s": 5201.678, "action": "Continued orbiting and zooming through the building model, then settled on a close view of the large wall and adjacent corridor partition.", "intent": "Review wall placement and surrounding geometry.", "app": "SketchUp 2026", "details": "No additional geometry edit was clearly supported; the span primarily changed the camera view."}, {"start_s": 5201.678, "end_s": 5211.795, "action": "Scrolled and orbited the SketchUp model, changing from a close wall view to an overhead view of the rooms and corridor.", "intent": "Inspect the 3D building model from different angles.", "app": "SketchUp 2026", "details": "Middle-click navigation and scroll input were used; system configuration changes also occurred."}, {"start_s": 5211.795, "end_s": 5221.932, "action": "Selected the Tape Measure tool, placed a guide on the wall, and entered a 6-inch distance while adjusting the view.", "intent": "Create or position a measured guide in the model.", "app": "SketchUp 2026", "details": "The status bar showed guide placement and length values."}, {"start_s": 5221.932, "end_s": 5231.651, "action": "Continued navigating the model, placed another guide point near the wall and entered a 1-foot measurement.", "intent": "Add another measured reference to the building model.", "app": "SketchUp 2026", "details": "Guide-placement mode remained active while the view moved toward the dining area and corridor."}, {"start_s": 5231.651, "end_s": 5240.74, "action": "Scrolled and repositioned the view, then entered a 3-foot measurement to extend the guide on the wall.", "intent": "Continue establishing dimensional guides on the model.", "app": "SketchUp 2026", "details": "The visible guide showed a 3-foot length during entry."}, {"start_s": 5240.74, "end_s": 5250.305, "action": "Entered a 4-foot measurement, switched to the Rectangle tool, drew a rectangular face on the wall, and selected the Push/Pull tool.", "intent": "Create a rectangular opening or feature on the wall.", "app": "SketchUp 2026", "details": "The rectangle dimensions were displayed, followed by a blue-highlighted face with Push/Pull active."}, {"start_s": 5250.305, "end_s": 5260.393, "action": "Navigated around the model, selected and manipulated the rectangular face with Push/Pull, then returned to the Select tool and adjusted the view.", "intent": "Inspect and modify the newly created wall feature.", "app": "SketchUp 2026", "details": "The final view showed the wall with a rectangular opening and surrounding rooms."}, {"start_s": 5260.393, "end_s": 5269.655, "action": "Navigated the SketchUp model with repeated scrolls and middle-button view adjustments, moving from a close interior view to a wider overhead view of the rooms and walls.", "intent": "Inspect the 3D building layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 5269.655, "end_s": 5275.798, "action": "Scrolled and adjusted the camera through the model, then zoomed out to reveal two separate building layouts in the workspace.", "intent": "Review the overall arrangement of the modeled structures.", "app": "SketchUp 2026", "details": null}, {"start_s": 5275.798, "end_s": 5284.735, "action": "Continued scrolling to refine the overhead perspective and center the two floor-plan models, leaving both layouts visible side by side.", "intent": "Compare or inspect the building layouts at a broader scale.", "app": "SketchUp 2026", "details": null}, {"start_s": 5284.735, "end_s": 5295.888, "action": "Used repeated scrolls and middle-button camera movements to zoom toward the right-hand model, ending on a closer overhead view of rooms, bathrooms, and furnishings.", "intent": "Inspect interior room details in the building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5295.888, "end_s": 5307.596, "action": "Changed to an orbiting view and scrolled outward, rotating from a close top-down room view to a wider view of the complete right-hand structure and part of the neighboring model.", "intent": "Review the model structure and its overall spatial layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 5307.596, "end_s": 5317.554, "action": "Scrolled and adjusted the camera around the building, then clicked and dragged across the front wall assembly, leaving the wall panels selected in blue.", "intent": "Inspect and select the front wall geometry.", "app": "SketchUp 2026", "details": "The final view shows the front wall group highlighted."}, {"start_s": 5317.554, "end_s": 5327.986, "action": "Clicked repeatedly on the central wall face, entered short text and space inputs, and scrolled without changing the visible selection.", "intent": "Work on the selected central wall area.", "app": "SketchUp 2026", "details": "Central wall face remained selected."}, {"start_s": 5327.986, "end_s": 5338.2, "action": "Entered dimension-like values with Enter, clicked the model, and positioned a guide on the selected wall edge while zooming or scrolling.", "intent": "Place a construction guide at a specified distance.", "app": "SketchUp 2026", "details": "The Tape Measure tool showed an on-edge inference and guide measurements."}, {"start_s": 5338.2, "end_s": 5347.917, "action": "Scrolled and adjusted the view, entered another dimension-like value, clicked the wall, and placed additional guide measurements across the selected face.", "intent": "Continue laying out construction guides on the wall.", "app": "SketchUp 2026", "details": "Multiple dashed guide lines and measurement indicators were visible."}, {"start_s": 5347.917, "end_s": 5357.695, "action": "Entered short text and clicked the wall several times, creating a rectangular opening in the selected face; then activated Push/Pull and began modifying the surrounding geometry.", "intent": "Create and modify an opening in the wall.", "app": "SketchUp 2026", "details": "A rectangular cutout appeared in the wall, followed by a changed 3D view with Push/Pull active."}, {"start_s": 5357.695, "end_s": 5367.792, "action": "Navigated around the model with orbit and scroll gestures, opened the Edit menu, and highlighted Delete Guides before returning to the model view.", "intent": "Inspect the model and manage construction guides.", "app": "SketchUp 2026", "details": "The Edit menu showed Delete Guides, and the model displayed multiple dashed guides."}, {"start_s": 5367.792, "end_s": 5387.792, "action": "Orbited and zoomed out from a close wall view to review the broader floor-plan model.", "intent": "Review the updated model from a wider perspective.", "app": "SketchUp 2026", "details": "The final view showed the overall multi-room wall layout with the new front-wall opening."}, {"start_s": 5387.792, "end_s": 5407.792, "action": "Paused in SketchUp with the 3D building model visible; the system resumed after brief configuration and connectivity changes.", "intent": "Maintain the current modeling view.", "app": "SketchUp 2026", "details": "No modeling change is visible."}, {"start_s": 5407.792, "end_s": 5427.792, "action": "Remained idle with the same SketchUp 3D building model displayed.", "intent": "Review or leave the model open.", "app": "SketchUp 2026", "details": null}, {"start_s": 5427.792, "end_s": 5447.792, "action": "Paused in SketchUp with the building model unchanged; the system resumed after brief configuration and connectivity changes.", "intent": "Maintain the current modeling view.", "app": "SketchUp 2026", "details": "No modeling interaction is visible."}, {"start_s": 5447.792, "end_s": 5467.792, "action": "Remained idle with the same 3D building model visible in SketchUp.", "intent": "Review or leave the model open.", "app": "SketchUp 2026", "details": null}, {"start_s": 5467.792, "end_s": 5487.792, "action": "Continued waiting in SketchUp without changing the displayed building model.", "intent": "Keep the current model view available.", "app": "SketchUp 2026", "details": null}, {"start_s": 5487.792, "end_s": 5507.792, "action": "Remained idle in SketchUp with the unchanged 3D building model on screen.", "intent": "Review or leave the model open.", "app": "SketchUp 2026", "details": null}, {"start_s": 5507.792, "end_s": 5527.792, "action": "Remained idle while the SketchUp model stayed visible in the 3D viewport.", "intent": "Pause while viewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5527.792, "end_s": 5547.792, "action": "Remained idle while the SketchUp architectural model stayed visible.", "intent": "Pause while viewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5547.792, "end_s": 5567.792, "action": "Remained idle while viewing the unchanged 3D building model.", "intent": "Pause while viewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5567.792, "end_s": 5587.792, "action": "Remained idle with the unchanged SketchUp model displayed.", "intent": "Pause while viewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5587.792, "end_s": 5607.792, "action": "Remained idle while the architectural model remained open in SketchUp.", "intent": "Pause while viewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5607.792, "end_s": 5622.523, "action": "Pressed Enter; the SketchUp viewport remained visually unchanged.", "intent": "Confirm or complete the current input.", "app": "SketchUp 2026", "details": null}, {"start_s": 5622.523, "end_s": 5640.307, "action": "Paused on the SketchUp model with the multi-room building visible; no substantive change occurred.", "intent": "Review the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5640.307, "end_s": 5651.496, "action": "Scrolled and middle-clicked to adjust the 3D view, leaving the building model framed from a more distant angle.", "intent": "Navigate the model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 5651.496, "end_s": 5662.267, "action": "Scrolled repeatedly and middle-clicked to orbit and zoom into the building, moving from an overall view to a close-up of interior walls and rooms.", "intent": "Inspect interior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 5662.267, "end_s": 5682.267, "action": "Scrolled and middle-clicked to zoom out and orbit around the model, revealing a broader view of the main building and a separate smaller structure.", "intent": "Compare the model structures from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 5682.267, "end_s": 5691.612, "action": "Scrolled and middle-clicked to orbit and zoom across the building, ending on a wider oblique view that clearly showed multiple furnished rooms and partitions.", "intent": "Inspect the building layout and interior arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 5691.612, "end_s": 5700.488, "action": "Zoomed and orbited into a close wall view, clicked repeatedly, dragged briefly, typed \u201ct,\u201d and left a wall face highlighted with the Tape Measure tool active and a visible guide measurement.", "intent": "Measure or mark a wall segment in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 5700.488, "end_s": 5711.389, "action": "Scrolled around the selected wall face, placed guide points, and entered 1 inch measurements; adjusted the guide position with a drag.", "intent": "Position construction guides on the selected wall face.", "app": "SketchUp 2026", "details": "Selected face remained highlighted and the Length field showed inch values."}, {"start_s": 5711.389, "end_s": 5720.785, "action": "Placed another guide point, entered 1 inch, then entered 8 inches after repositioning the view.", "intent": "Create additional measured guides on the wall face.", "app": "SketchUp 2026", "details": "Guide lines remained visible across the highlighted face."}, {"start_s": 5720.785, "end_s": 5730.814, "action": "Placed a guide with a 1 inch entry, switched tools with the R shortcut, and adjusted the camera and selection around the upper wall area.", "intent": "Continue laying out construction references and inspect the wall geometry.", "app": "SketchUp 2026", "details": "The view changed from a close-up highlighted face to a smaller selected rectangular face."}, {"start_s": 5730.814, "end_s": 5740.403, "action": "Switched tools with keyboard shortcuts, orbited and scrolled around the model, then used Push/Pull on the selected wall face and entered a value beginning with \u201cn \u201d.", "intent": "Modify the selected wall geometry and inspect the resulting placement.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the selected rectangular face was visible within the building model."}, {"start_s": 5740.403, "end_s": 5750.094, "action": "Orbited and zoomed out to review the building, opened the Edit menu, highlighted Delete Guides, then closed the menu and continued navigating the model.", "intent": "Review the overall model and manage construction guides.", "app": "SketchUp 2026", "details": "The Edit menu visibly offered Delete Guides; the final view showed the full multi-room building without visible dashed guides."}, {"start_s": 5750.094, "end_s": 5760.118, "action": "Scrolled and orbited through the building interior, then zoomed far out to compare two separate building models in the workspace.", "intent": "Inspect the modeled interiors and overall project layout.", "app": "SketchUp 2026", "details": "The view progressed from a close interior overview to a distant view containing two floor-plan structures."}, {"start_s": 5760.118, "end_s": 5770.284, "action": "Navigated the SketchUp camera through repeated middle-button clicks and scrolls, moving from an overview of two floor-plan models into a close view of the larger interior layout.", "intent": "Inspect the 3D floor-plan model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 5770.284, "end_s": 5779.81, "action": "Continued orbiting and zooming around the larger building model, shifting from a distant view to a closer elevated view of walls, rooms, doors, and furnishings.", "intent": "Review the building layout and interior arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 5779.81, "end_s": 5789.436, "action": "Adjusted the camera with repeated middle-button clicks and scrolls, rotating across the building and ending on an angled overview showing multiple rooms and the adjacent model.", "intent": "Examine the model from additional angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 5789.436, "end_s": 5809.436, "action": "Orbited and zoomed out from the building exterior to a wide SketchUp scene view showing both separate floor-plan models.", "intent": "Reframe the scene to compare the two models.", "app": "SketchUp 2026", "details": null}, {"start_s": 5809.436, "end_s": 5829.436, "action": "Remained on the wide SketchUp view of the two models with no substantive visible modeling change; brief system-state events occurred near the end before a click.", "intent": "Pause while viewing the overall scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 5829.436, "end_s": 5839.828, "action": "Used repeated middle-button clicks and scrolls to orbit and zoom toward the larger model, ending on an elevated angled view of its rooms, partitions, and furnishings.", "intent": "Inspect the larger floor-plan model from another perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 5839.828, "end_s": 5849.878, "action": "Orbited and zoomed out around the SketchUp building model, changing from a close interior view to a wider view showing multiple floor-plan structures.", "intent": "Inspect the overall 3D model from different angles and scales.", "app": "SketchUp 2026", "details": null}, {"start_s": 5849.878, "end_s": 5859.566, "action": "Continued orbiting and zooming the SketchUp scene, alternating between the two building layouts and ending on a closer perspective of the larger furnished structure.", "intent": "Review the spatial arrangement and interior layout of the modeled buildings.", "app": "SketchUp 2026", "details": null}, {"start_s": 5859.566, "end_s": 5869.123, "action": "Rotated and zoomed the camera around the larger building model, moving from a distant oblique view to a closer view of its partitioned rooms and furnishings.", "intent": "Examine the building model from another exterior angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 5869.123, "end_s": 5880.165, "action": "Orbiting and zooming continued, briefly showing both building models together before moving into a closer overhead perspective of the larger layout.", "intent": "Compare the modeled structures and inspect their room arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 5880.165, "end_s": 5889.55, "action": "Adjusted the camera through repeated orbit and zoom movements, widening to show both structures and then returning to a medium view of the larger furnished building.", "intent": "Review the overall model composition and building layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 5889.55, "end_s": 5894.897, "action": "Zoomed and orbited around the larger building, moving from a close interior perspective to a wider angled view that included part of the neighboring structure.", "intent": "Inspect the building from additional viewpoints and confirm its overall arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 5894.897, "end_s": 5914.897, "action": "Reviewed the SketchUp scene while making minor scroll inputs; kept two separate building layouts visible in the 3D workspace.", "intent": "Inspect the overall 3D model arrangement.", "app": "SketchUp", "details": null}, {"start_s": 5914.897, "end_s": 5925.224, "action": "Navigated the SketchUp camera with middle-button clicks and scroll inputs, moving from an overview toward a close view inside the larger furnished building model.", "intent": "Examine the larger building model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 5925.224, "end_s": 5936.955, "action": "Adjusted the camera with a middle-button click and repeated scroll inputs, pulling back to show the larger building and the separate smaller layout together.", "intent": "Review the spatial relationship between the two modeled layouts.", "app": "SketchUp", "details": null}, {"start_s": 5936.955, "end_s": 5947.484, "action": "Scrolled repeatedly to zoom farther out and reposition the camera, leaving both building layouts small but visible with surrounding axes and workspace.", "intent": "Inspect the models in a wider scene context.", "app": "SketchUp", "details": null}, {"start_s": 5947.484, "end_s": 5957.464, "action": "Used middle-button clicks and scroll inputs to orbit and zoom back toward the larger building, changing from a distant overview to a closer angled view of its rooms and furnishings.", "intent": "Inspect the larger building interior and layout.", "app": "SketchUp", "details": null}, {"start_s": 5957.464, "end_s": 5967.986, "action": "Navigated the camera with middle-button clicks and repeated scroll inputs, moving into a high, close view of the larger building\u2019s interior partitions, rooms, stairs, and furnishings.", "intent": "Examine interior details from an elevated viewpoint.", "app": "SketchUp", "details": null}, {"start_s": 5967.986, "end_s": 5977.625, "action": "Orbited and zoomed around the SketchUp apartment model, changing from an overhead interior view to an exterior wall view.", "intent": "Inspect the 3D building model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 5977.625, "end_s": 5987.303, "action": "Navigated to a close view of the building facade, selected geometry, and entered short text inputs while working on the model.", "intent": "Prepare or modify facade geometry.", "app": "SketchUp 2026", "details": "The view changed from a top-down room layout to a close exterior wall view."}, {"start_s": 5987.303, "end_s": 5998.015, "action": "Selected the central facade panel, adjusted the view, and entered a 1-foot measurement.", "intent": "Set or adjust the dimensions of the selected facade element.", "app": "SketchUp 2026", "details": "The central wall face was highlighted and the measurement field showed a 1-foot entry."}, {"start_s": 5998.015, "end_s": 6008.163, "action": "Entered additional measurements, selected the facade panel, and orbited to inspect the resulting wall geometry.", "intent": "Refine the selected wall panel dimensions and verify the model.", "app": "SketchUp 2026", "details": "The selected panel remained highlighted while guide lines and measurement feedback were visible."}, {"start_s": 6008.163, "end_s": 6017.002, "action": "Entered another measurement, zoomed and orbited closer, and continued selecting the central wall face.", "intent": "Continue dimensioning and inspecting the facade panel.", "app": "SketchUp 2026", "details": "The camera moved into a close-up of the highlighted wall face."}, {"start_s": 6017.002, "end_s": 6027.493, "action": "Entered a measurement, drew a rectangular shape on the selected wall face, and orbited to inspect the new opening or inset from an angled view.", "intent": "Create and inspect a rectangular feature on the wall.", "app": "SketchUp 2026", "details": "A small rectangular face was visible on the wall in the final angled view."}, {"start_s": 6027.493, "end_s": 6037.291, "action": "Adjusted the SketchUp camera with orbit, zoom, and pan gestures, briefly used Push/Pull on a wall face, and returned to a wider view of the building model.", "intent": "Inspect the overall 3D building layout from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 6037.291, "end_s": 6051.548, "action": "Scrolled and orbited around the SketchUp model, moving from a front overview to an angled view of the rooms and exterior walls.", "intent": "Review the building model from another angle.", "app": "SketchUp", "details": null}, {"start_s": 6051.548, "end_s": 6061.626, "action": "Orbited and zoomed out around the model, revealing multiple building sections, then rotated into a more top-down view showing the interior floor plan and furnishings.", "intent": "Inspect the relationship between the building sections and interior layout.", "app": "SketchUp", "details": null}, {"start_s": 6061.626, "end_s": 6071.781, "action": "Clicked and dragged around a wall and doorway area while entering short keyboard inputs, then continued navigating and zooming into the wall intersection.", "intent": "Inspect or adjust geometry around the interior wall and doorway.", "app": "SketchUp", "details": null}, {"start_s": 6071.781, "end_s": 6081.659, "action": "Selected faces and edges near an interior wall, used Push/Pull-style interactions and short keyboard inputs, and zoomed in until a wall face and top edge were closely framed.", "intent": "Modify or examine the dimensions of a wall segment.", "app": "SketchUp", "details": null}, {"start_s": 6081.659, "end_s": 6091.669, "action": "Navigated through close interior views with repeated zooming and orbiting, clicked several wall areas, and ended on an elevated view of adjacent rooms and partitions.", "intent": "Continue inspecting interior wall geometry and room arrangement.", "app": "SketchUp", "details": null}, {"start_s": 6091.669, "end_s": 6101.702, "action": "Navigated around the SketchUp interior model by orbiting, panning, zooming, and scrolling, moving from a broad room view to a close view of the partition walls.", "intent": "Inspect the modeled room layout and wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 6101.702, "end_s": 6111.791, "action": "Continued orbiting, panning, zooming, and scrolling around the partition and adjacent furnished room, ending on a close-up of a wall surface.", "intent": "Examine the wall and surrounding interior geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 6111.791, "end_s": 6122.278, "action": "Selected a wall face, activated the Tape Measure tool, placed a guide across the face, and entered distance values including 1 foot; repositioned the view while keeping the face selected.", "intent": "Lay out construction guides and measure the wall face.", "app": "SketchUp 2026", "details": "The selected wall face is highlighted and the status bar shows Tape Measure mode with a 4-foot length."}, {"start_s": 6122.278, "end_s": 6132.516, "action": "Continued placing and adjusting guides on the selected wall face, entering 1-foot and 8-foot values while panning and zooming around the wall.", "intent": "Position additional guide measurements on the wall.", "app": "SketchUp 2026", "details": "Multiple dashed guide lines are visible across the selected face."}, {"start_s": 6132.516, "end_s": 6142.379, "action": "Switched to a drawing tool, entered a 1-foot value, then used the Rectangle tool to draw a rectangular opening or face detail on the wall; adjusted the view and completed the rectangle.", "intent": "Create a rectangular feature on the wall using the measured guides.", "app": "SketchUp 2026", "details": "A white rectangular region appears within the purple-highlighted wall face, with Dimensions shown as approximately 2 feet 1 inch."}, {"start_s": 6142.379, "end_s": 6152.463, "action": "Entered additional tool shortcuts, navigated around the model, and used Push/Pull on a selected narrow face; then opened the Edit menu and chose Delete Guides, removing the dashed construction guides.", "intent": "Modify the wall feature and clean up temporary construction guides.", "app": "SketchUp 2026", "details": "The final view shows the wall with a rectangular opening/detail and no dashed guides; the status bar confirms deletion of all dashed guide lines."}, {"start_s": 6152.463, "end_s": 6162.925, "action": "Orbited and zoomed around the SketchUp building model, shifting from a close view of the partitioned rooms to a higher overall view.", "intent": "Inspect the 3D building layout from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 6162.925, "end_s": 6172.382, "action": "Zoomed out and orbited around the model, then repositioned the camera to show the room partitions, dining table, and surrounding walls from another elevated angle.", "intent": "Review the overall spatial arrangement of the modeled rooms.", "app": "SketchUp 2026", "details": null}, {"start_s": 6172.382, "end_s": 6182.042, "action": "Orbited and zoomed toward the central and right-side rooms, ending on a closer elevated view of the partition walls, openings, and dining area.", "intent": "Inspect interior wall placement and room details.", "app": "SketchUp 2026", "details": null}, {"start_s": 6182.042, "end_s": 6192.995, "action": "Continued orbiting and zooming through the model, moving from a close view of a room and doorway to a broader view of the dining area and adjacent partitioned spaces.", "intent": "Examine the modeled interior arrangement from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 6192.995, "end_s": 6202.824, "action": "Zoomed and orbited farther out to reveal most of the building footprint and its many interior partitions, then settled on an elevated oblique overview.", "intent": "Review the overall building model and room layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 6202.824, "end_s": 6222.824, "action": "Remained inactive while the SketchUp model stayed on the same elevated overview of the partitioned building.", "intent": "Pause while reviewing the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 6222.824, "end_s": 6232.464, "action": "Orbit the SketchUp camera around the modeled building layouts, changing from an elevated oblique view to a lower front-facing view.", "intent": "Inspect the overall 3D building arrangement from different angles.", "app": "SketchUp", "details": null}, {"start_s": 6232.464, "end_s": 6242.871, "action": "Orbit and zoom the SketchUp view through wide and closer perspectives, ending on a detailed oblique view of the larger floor-plan model.", "intent": "Review the building geometry and interior wall layout.", "app": "SketchUp", "details": null}, {"start_s": 6242.871, "end_s": 6253.062, "action": "Orbit and adjust the camera around the larger building, moving from an oblique side view to a more centered front/top view of its rooms and walls.", "intent": "Inspect the model\u2019s room arrangement and architectural details.", "app": "SketchUp", "details": null}, {"start_s": 6253.062, "end_s": 6264.672, "action": "Zoom out and orbit to compare the two building layouts, then zoom back toward the larger model for a closer overhead view.", "intent": "Compare the separate model layouts and review the larger structure.", "app": "SketchUp", "details": null}, {"start_s": 6264.672, "end_s": 6276.351, "action": "Orbit and zoom around the larger model, moving from a wide exterior view into a close interior view of walls, openings, and a doorway.", "intent": "Examine interior architectural elements at closer range.", "app": "SketchUp", "details": null}, {"start_s": 6276.351, "end_s": 6286.256, "action": "Orbit and zoom within the model, then type 'r' and click to activate the Line tool and begin drawing a line across the visible wall area.", "intent": "Start editing the model by creating a line segment.", "app": "SketchUp", "details": "The final view shows the Line tool active with a blue line preview and a displayed dimension of approximately 2' 1 7/8\"."}, {"start_s": 6286.256, "end_s": 6296.197, "action": "Adjusted the SketchUp view with scrolling and middle-button orbiting, then interacted with the visible wall geometry using the active drawing tool.", "intent": "Inspect and position the 3D model for continued editing.", "app": "SketchUp 2026", "details": "The view changed from a close-up of wall sections to a wider architectural view."}, {"start_s": 6296.197, "end_s": 6305.918, "action": "Selected or targeted edges on the wall geometry and continued repositioning the view with scrolling and orbiting.", "intent": "Align the modeling view and work on a wall element.", "app": "SketchUp 2026", "details": "A blue inference line and an \u201cOn Edge\u201d indication appeared during the geometry interaction."}, {"start_s": 6305.918, "end_s": 6315.808, "action": "Entered 3' and confirmed it, then adjusted the view and selected the resulting wall area.", "intent": "Set a precise dimension for the active modeling operation.", "app": "SketchUp 2026", "details": "The model shifted to a higher overview, and a wall face was briefly highlighted before the view changed."}, {"start_s": 6315.808, "end_s": 6325.035, "action": "Orbited and zoomed around the building model, moving from an exterior overview into a close-up of wall and opening geometry.", "intent": "Review the model from different angles and inspect the edited area.", "app": "SketchUp 2026", "details": "The view transitioned from a broad building overview to a close-up showing a blue-highlighted face."}, {"start_s": 6325.035, "end_s": 6334.245, "action": "Selected geometry and navigated through the model with scrolling and orbiting, ending on a wider view of interior partitions and wall openings.", "intent": "Inspect surrounding architectural elements after the geometry operation.", "app": "SketchUp 2026", "details": "The active Push/Pull tool was visible briefly, but no confirmed distance change was shown."}, {"start_s": 6334.245, "end_s": 6344.287, "action": "Navigated around the wall assembly with scrolling and middle-button orbiting, then clicked and dragged on an upper wall edge.", "intent": "Position and refine the view while continuing work on the wall geometry.", "app": "SketchUp 2026", "details": "The final view showed the upper wall edge and adjacent doorway/opening from an elevated angle."}, {"start_s": 6344.287, "end_s": 6356.847, "action": "Adjusted the active rectangle\u2019s opposite corner with clicks and brief typing, leaving the outlined shape constrained on a plane.", "intent": "Continue defining a rectangular element in the model.", "app": "SketchUp 2026", "details": "The Dimensions field showed approximately 2' 1 5/16\" by 6 7/16\"."}, {"start_s": 6356.847, "end_s": 6366.037, "action": "Repositioned the view with middle-click navigation and scrolling, then continued adjusting the outlined rectangle near the wall framing.", "intent": "Inspect and refine the rectangle from another viewpoint.", "app": "SketchUp 2026", "details": "The rectangle remained active with its dimensions changing visibly."}, {"start_s": 6366.037, "end_s": 6375.973, "action": "Clicked around the active rectangle and orbited the model, changing the viewing angle while continuing the in-progress rectangle operation.", "intent": "Align the rectangle with surrounding model geometry.", "app": "SketchUp 2026", "details": "The view shifted from a close wall intersection to an oblique view of the framing."}, {"start_s": 6375.973, "end_s": 6385.507, "action": "Orbited and zoomed out through repeated middle-button navigation, then switched to selection and selected broad model geometry.", "intent": "Review the modeled area and inspect the resulting geometry.", "app": "SketchUp 2026", "details": "The final view showed a larger room-wall assembly, with selected edges/faces visible earlier in the span."}, {"start_s": 6385.507, "end_s": 6395.462, "action": "Navigated around the model, selected a face, activated Push/Pull, and entered 3' followed by Enter to set a distance.", "intent": "Extrude the selected wall or beam face by a specified distance.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the Distance field showed approximately 1' 9/16\" before the typed value."}, {"start_s": 6395.462, "end_s": 6405.269, "action": "Selected and manipulated model geometry, then orbited and zoomed far out to review the overall floor plan and room layout.", "intent": "Inspect the updated model at both local and overall scales.", "app": "SketchUp 2026", "details": "The final view displayed a broad overview of the multi-room architectural model."}, {"start_s": 6405.269, "end_s": 6413.427, "action": "Navigated around the SketchUp model with orbit/zoom inputs, selected a point on the upper structure, and began drawing a line or edge between visible architectural elements.", "intent": "Edit the 3D model geometry near the upper structural members.", "app": "SketchUp 2026", "details": "The Line tool remained active and the dimensions field was visible."}, {"start_s": 6413.427, "end_s": 6422.395, "action": "Adjusted the camera view and clicked points on the model to continue positioning the active line or edge.", "intent": "Continue placing geometry on the upper structure.", "app": "SketchUp 2026", "details": "The model remained in a close-up view with the Line tool active."}, {"start_s": 6422.395, "end_s": 6434.294, "action": "Paused while the desktop configuration changed, then clicked the model and scrolled the view; left the drawing tool ready at a selected corner.", "intent": "Inspect and prepare the next geometry edit.", "app": "SketchUp 2026", "details": "No clear geometry completion was visible; the status bar indicated the first-corner drawing state."}, {"start_s": 6434.294, "end_s": 6444.225, "action": "Navigated around the model, selected a face or edge, typed a distance of 3 feet and confirmed it, then continued scrolling and entered additional keyboard input.", "intent": "Modify the selected architectural element by an exact distance.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active after the distance entry, and the visible result showed an extruded structural face."}, {"start_s": 6444.225, "end_s": 6454.572, "action": "Adjusted the view and clicked two locations on the upper structure, leaving a line or measurement preview spanning between model points.", "intent": "Position or draw another edge on the architectural model.", "app": "SketchUp 2026", "details": "The Line tool remained active with endpoint markers and a dimensions readout visible."}, {"start_s": 6454.572, "end_s": 6465.213, "action": "Orbited and zoomed to another area of the model, selected points, entered a 3-foot distance and confirmed it, then continued navigating across the building interior and exterior.", "intent": "Continue editing and inspecting structural geometry in the SketchUp model.", "app": "SketchUp 2026", "details": "The final view showed an overhead interior/exterior perspective with the orbit tool active."}, {"start_s": 6465.213, "end_s": 6473.938, "action": "Navigated around the SketchUp interior model with repeated scroll and middle-click orbit actions, then used the drawing tool to begin a rectangular element near the wall opening.", "intent": "Adjust the view and start drawing a model element.", "app": "SketchUp 2026", "details": "The view shifted to a close-up of the interior walls, with a drawing operation active by the end."}, {"start_s": 6473.938, "end_s": 6483.644, "action": "Clicked near the upper wall edge, switched tools with a typed shortcut, and entered 3' to set the element\u2019s dimension.", "intent": "Create or size geometry along the wall edge.", "app": "SketchUp 2026", "details": "The active tool displayed a distance of approximately 10 5/16 inches after the dimension entry."}, {"start_s": 6483.644, "end_s": 6493.733, "action": "Orbited and adjusted the view around the interior, used tool shortcuts, clicked wall edges, and repositioned the camera to inspect the adjoining rooms and openings.", "intent": "Inspect and position the model for continued editing.", "app": "SketchUp 2026", "details": "The model remained in a close interior view with walls, door openings, and windows visible."}, {"start_s": 6493.733, "end_s": 6504.066, "action": "Entered a tool shortcut and 3' dimension, then zoomed and orbited outward to review a broader portion of the floor plan before returning to a wall close-up.", "intent": "Set a geometry dimension and review the surrounding model.", "app": "SketchUp 2026", "details": "The view expanded to show multiple rooms, furnishings, and partition walls."}, {"start_s": 6504.066, "end_s": 6513.706, "action": "Zoomed and orbited repeatedly from the room close-up to a wider model view, then clicked an edge and began drawing a rectangular shape between wall sections.", "intent": "Navigate the model and start another rectangular geometry element.", "app": "SketchUp 2026", "details": "A blue-outlined rectangle and active drawing cursor were visible near the top of the wall assembly."}, {"start_s": 6513.706, "end_s": 6522.461, "action": "Clicked the far endpoint of the outlined rectangle, entered a drawing shortcut and dimension value, and completed the rectangular wall element across the opening.", "intent": "Complete and size the new geometry across the wall opening.", "app": "SketchUp 2026", "details": "The outlined shape became a solid horizontal wall or beam-like element, with the distance field showing approximately 11 3/16 inches."}, {"start_s": 6522.461, "end_s": 6532.498, "action": "Pressed Enter, then orbited and zoomed around the SketchUp interior model with repeated middle-button drags and scrolls.", "intent": "Inspect the 3D floor-plan model from changing viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 6532.498, "end_s": 6542.742, "action": "Continued orbiting and zooming through the modeled rooms, briefly entering spaces with furniture and wall openings.", "intent": "Review interior geometry and room layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 6542.742, "end_s": 6553.165, "action": "Changed the view, selected the Line tool, and drew or adjusted a line across the upper wall area; entered numeric input and confirmed it.", "intent": "Create or dimension geometry on the wall model.", "app": "SketchUp 2026", "details": "The visible line and measurement guides indicate an active drawing operation."}, {"start_s": 6553.165, "end_s": 6562.96, "action": "Orbited and zoomed out to review the full house model, then zoomed back into a wall section and began another line-drawing operation.", "intent": "Inspect the overall model and continue editing wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 6562.96, "end_s": 6575.094, "action": "Zoomed closely into the wall and floor area and positioned the active drawing tool over the geometry without a visible completed change.", "intent": "Set up or inspect a precise drawing location.", "app": "SketchUp 2026", "details": "The view remained focused on a close-up wall section with drawing guides visible."}, {"start_s": 6575.094, "end_s": 6584.528, "action": "Zoomed and orbited around the close-up wall, entered brief keyboard input, clicked the geometry, and dragged out another line between wall points.", "intent": "Draw or measure a wall element in the SketchUp model.", "app": "SketchUp 2026", "details": "The final view shows an active line with endpoints and a dimensions readout."}, {"start_s": 6584.528, "end_s": 6594.859, "action": "Adjusted the SketchUp view with middle-click navigation and scrolling, then clicked points on the model while the Line tool remained active, leaving a long white horizontal element visible.", "intent": "Continue drawing or positioning geometry in the model.", "app": "SketchUp 2026", "details": "The view changed from a close-up interior area to a perspective showing the horizontal element and adjacent rooms."}, {"start_s": 6594.859, "end_s": 6603.99, "action": "Typed tool shortcuts and used middle-click navigation and scrolling, then selected a face with the Push/Pull tool and clicked another model point, leaving the geometry in an active drawing state.", "intent": "Modify or continue constructing the visible architectural geometry.", "app": "SketchUp 2026", "details": "The Push/Pull status prompt appeared briefly, followed by a Line-tool-style active guide across the model."}, {"start_s": 6603.99, "end_s": 6614.784, "action": "Paused with the Line tool active, then clicked a model point to place or confirm the next endpoint, leaving a red guide line spanning the structure.", "intent": "Continue positioning a line endpoint in the SketchUp model.", "app": "SketchUp 2026", "details": "The visible guide measured approximately 2 feet 6 inches and remained active at the end of the span."}, {"start_s": 6614.784, "end_s": 6625.541, "action": "Navigated around the model with extensive middle-click orbiting and scrolling, switched tools with a shortcut, and entered 3 feet before clicking model faces, changing the view to show a raised horizontal wall or beam.", "intent": "Inspect and adjust the architectural element from different viewpoints.", "app": "SketchUp 2026", "details": "The status bar showed an active Push/Pull operation with a 3-foot distance."}, {"start_s": 6625.541, "end_s": 6635.328, "action": "Clicked model faces and orbited extensively, zooming out from the close-up to an overhead view of the room layout and surrounding walls.", "intent": "Review the edited geometry in the broader architectural model.", "app": "SketchUp 2026", "details": "The final view showed multiple rooms, wall panels, and furnishings from above."}, {"start_s": 6635.328, "end_s": 6645.325, "action": "Orbited and zoomed through the model from a close-up wall junction to a wide overhead view, ending with the Select tool active and the full room layout visible.", "intent": "Inspect the overall architectural model and verify the current geometry.", "app": "SketchUp 2026", "details": "The final screenshot showed two building layouts, including the detailed foreground floor plan."}, {"start_s": 6645.325, "end_s": 6654.965, "action": "Scrolled and orbited around the SketchUp model, moving from an empty view to a wider view of two building layouts; clicked within the model while adjusting the view.", "intent": "Inspect the overall 3D model and navigate to a usable view.", "app": "SketchUp 2026", "details": null}, {"start_s": 6654.965, "end_s": 6664.808, "action": "Zoomed and orbited into the furnished floor-plan model, then activated a drawing tool and positioned the cursor over the interior near the bedroom and bathroom area.", "intent": "Navigate to and prepare to edit a specific interior area.", "app": "SketchUp 2026", "details": "The view ends close to the bedroom, bathroom, and living-room geometry with a drawing tool active."}, {"start_s": 6664.808, "end_s": 6674.995, "action": "Adjusted the view and drew a line across the interior wall area, then switched to Push/Pull and raised the resulting face into a horizontal wall or beam-like extrusion.", "intent": "Create or modify architectural geometry in the interior model.", "app": "SketchUp 2026", "details": "The line was constrained on a plane intersection, and the final view shows a newly extruded rectangular element."}, {"start_s": 6674.995, "end_s": 6685.141, "action": "Entered a 3-foot dimension and confirmed it, then selected faces on the new extrusion and used undo commands while inspecting the close-up geometry.", "intent": "Set the extrusion dimension and correct or review the geometry.", "app": "SketchUp 2026", "details": "A face on the horizontal element is highlighted while the Push/Pull tool remains active."}, {"start_s": 6685.141, "end_s": 6695.955, "action": "Undid a prior change, switched back to a line-drawing tool, and clicked points around the bathroom and adjacent wall while adjusting the view.", "intent": "Revise the architectural geometry near the bathroom and wall junction.", "app": "SketchUp 2026", "details": "The model shows active purple line inference and a newly positioned line segment."}, {"start_s": 6695.955, "end_s": 6705.74, "action": "Selected and edited the wall geometry, entered a 3-foot dimension, then orbited and zoomed around the enlarged wall or beam element.", "intent": "Adjust the wall or beam height and inspect the resulting model geometry.", "app": "SketchUp 2026", "details": "The final view is an extreme close-up of the edited surfaces with the Orbit tool active."}, {"start_s": 6705.74, "end_s": 6714.129, "action": "Orbited and zoomed around the SketchUp apartment model, moving from a close wall view to an overhead view of the rooms.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 6714.129, "end_s": 6724.352, "action": "Continued orbiting and zooming out across the apartment layout, reviewing the central living areas, rooms, walls, and fixtures.", "intent": "Review the overall modeled floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 6724.352, "end_s": 6734.997, "action": "Navigated to a close wall and bathroom area, activated a drawing tool, and entered measurements including 3' to create or modify geometry.", "intent": "Add or adjust a measured element in the model.", "app": "SketchUp 2026", "details": "The status bar showed a drawing dimension of approximately 2' 5 3/16\" before the later 3' entry."}, {"start_s": 6734.997, "end_s": 6744.525, "action": "Used the Push/Pull tool on a close wall face, entered a 3' distance, and then orbited back to inspect the resulting apartment geometry.", "intent": "Extrude or resize a wall element to a specified distance.", "app": "SketchUp 2026", "details": "The Push/Pull status bar displayed a distance of 3'."}, {"start_s": 6744.525, "end_s": 6754.442, "action": "Orbited and zoomed through the living-room and adjacent room areas, then selected a wall edge or face and began another measured drawing operation.", "intent": "Inspect the model and prepare another geometric adjustment.", "app": "SketchUp 2026", "details": "A second line or rectangle-like measurement was active near the living-room partition at the end."}, {"start_s": 6754.442, "end_s": 6765.164, "action": "Zoomed into the living-room partition, drew or measured across the wall area, and used the Push/Pull tool with a typed 3' value to modify the geometry.", "intent": "Create or extrude another measured wall element.", "app": "SketchUp 2026", "details": "The final Push/Pull distance displayed was approximately 10 1/2\"."}, {"start_s": 6765.164, "end_s": 6775.178, "action": "Navigated around the SketchUp architectural model with repeated orbit and zoom movements, clicking in the model while the Push/Pull tool remained active.", "intent": "Inspect and position the 3D building model for further editing.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall and furniture area to a wider overhead view of the floor plan."}, {"start_s": 6775.178, "end_s": 6786.381, "action": "Zoomed and orbited through the building model, briefly dragged on a wall area, and switched back to selection while continuing to inspect rooms and walls.", "intent": "Review the model from different viewpoints and select geometry for possible editing.", "app": "SketchUp 2026", "details": "The camera moved from a distant overall view to a closer view of rooms containing furniture and partitions."}, {"start_s": 6786.381, "end_s": 6795.32, "action": "Selected drawing geometry, entered a short distance value of 3' and confirmed it, then orbited away from the interior model.", "intent": "Create or adjust a line or face using a specified dimension.", "app": "SketchUp 2026", "details": "The Line tool was visible during the dimension entry, followed by an orbit view near an exterior wall."}, {"start_s": 6795.32, "end_s": 6804.894, "action": "Orbited and zoomed through the model, selected a wall face, and positioned the Push/Pull tool over the face.", "intent": "Inspect and prepare a wall face for dimensional modification.", "app": "SketchUp 2026", "details": "A wall face became highlighted with the Push/Pull cursor, and the distance field changed during the inspection."}, {"start_s": 6804.894, "end_s": 6815.305, "action": "Dragged and clicked on model geometry, then orbited and zoomed outward to review the building from elevated exterior viewpoints.", "intent": "Inspect the overall arrangement after selecting or manipulating model geometry.", "app": "SketchUp 2026", "details": "The view progressed from a close wall face to a broad perspective showing the main building and a separate structure."}, {"start_s": 6815.305, "end_s": 6825.446, "action": "Orbited and zoomed around the architectural model, switching between wide and closer overhead views of the two building layouts and their interior rooms.", "intent": "Review the completed or current building layout from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view focused on the main building interior, including a dining area, hallway, bathroom, and adjacent rooms."}, {"start_s": 6825.446, "end_s": 6836.245, "action": "Selected a face in the SketchUp model, used the Push/Pull tool, entered a 3-inch value, and navigated the view with scrolling.", "intent": "Adjust the thickness or height of a modeled face.", "app": "SketchUp 2026", "details": "The model showed interior rooms and furniture; the Push/Pull distance field displayed 0 inches after the operation."}, {"start_s": 6836.245, "end_s": 6846.08, "action": "Started a drawing operation on a wall or face, entered a 3-inch value, and zoomed or panned across the model.", "intent": "Create or modify geometry on a selected model face.", "app": "SketchUp 2026", "details": "The view moved from an interior wall and sink area to a close-up of a large wall face."}, {"start_s": 6846.08, "end_s": 6856.019, "action": "Entered a 3-inch value, orbited and zoomed around the building, and changed the camera to a broader overhead view of the rooms.", "intent": "Inspect the model while applying or verifying a geometric adjustment.", "app": "SketchUp 2026", "details": "The model displayed multiple furnished rooms, walls, and bathroom fixtures before the view moved to a close-up surface."}, {"start_s": 6856.019, "end_s": 6865.377, "action": "Scrolled and clicked around the model, selected a large face, and navigated back to an exterior overhead view of the building.", "intent": "Inspect and select building geometry for further editing.", "app": "SketchUp 2026", "details": "A large face was highlighted during the interval, and the final view showed the building shell and interior partitions."}, {"start_s": 6865.377, "end_s": 6875.248, "action": "Orbited and zoomed around the building, clicked near its geometry, and pulled back to show the modeled structure alongside another building model.", "intent": "Review the overall building model and its surrounding layout.", "app": "SketchUp 2026", "details": "The final view showed a small complete building centered in the workspace with part of a second model visible at right."}, {"start_s": 6875.248, "end_s": 6885.175, "action": "Orbited and zoomed through the building interior, moving from a close view of partition walls to a wider overhead view of rooms and a central stair-like feature.", "intent": "Inspect the interior layout and geometry from multiple angles.", "app": "SketchUp 2026", "details": "No definite geometry edit was visible; the interval primarily consisted of camera navigation."}, {"start_s": 6885.175, "end_s": 6895.302, "action": "Orbit and zoom the SketchUp camera around the furnished multi-room house model, moving from a close interior view to a wider overhead view.", "intent": "Inspect the 3D house layout from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 6895.302, "end_s": 6903.775, "action": "Continue orbiting and zooming around the house model, reframing the living areas, dining tables, bedrooms, and central stairwell from overhead perspectives.", "intent": "Review the overall floor-plan arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 6903.775, "end_s": 6914.542, "action": "Orbit and zoom toward the bedrooms and adjacent rooms, ending on a closer view of a furnished bedroom, bathroom area, and dining space.", "intent": "Inspect room interiors and their spatial relationships.", "app": "SketchUp 2026", "details": null}, {"start_s": 6914.542, "end_s": 6924.419, "action": "Select the Rectangle tool, click near the bedroom doorway/wall area, and begin drawing a rectangle while navigating the close-up model view; type single characters during the operation without a clearly visible completed value.", "intent": "Create or position geometry near the bedroom wall and doorway.", "app": "SketchUp 2026", "details": "The rectangle operation remains active, with the dimensions box visible and no clearly completed shape confirmed."}, {"start_s": 6924.419, "end_s": 6934.058, "action": "Continue the active drawing/editing operation near the bedroom wall, switch to the Push/Pull tool, and enter a 3-foot value to extrude the selected face or geometry.", "intent": "Modify the model geometry near the bedroom partition.", "app": "SketchUp 2026", "details": "The Push/Pull tool shows a distance of approximately 11 7/8 inches after the typed 3-foot entry."}, {"start_s": 6934.058, "end_s": 6944.262, "action": "Use the Push/Pull tool and orbit/zoom around the model, clicking faces and reframing from the bedroom and dining area to a wider overhead view of the house.", "intent": "Inspect or adjust the recently edited geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Push/Pull tool remains active and the distance indicator is visible at the end."}, {"start_s": 6944.262, "end_s": 6954.269, "action": "Clicked and navigated around the SketchUp floor-plan model, typed a single character, and began positioning a rectangular drawing on a wall or face.", "intent": "Modify or inspect geometry near the interior wall and doorway.", "app": "SketchUp 2026", "details": "Push/Pull and rectangle-style drawing tools were active while the view zoomed toward the dining-area wall."}, {"start_s": 6954.269, "end_s": 6964.189, "action": "Adjusted the camera around the interior model, entered a short value, dragged across a wall face, and used the active modeling tool to alter or inspect the selected face.", "intent": "Set or adjust a dimension on the interior wall geometry.", "app": "SketchUp 2026", "details": "The view moved from the dining area toward the bedroom and hallway; the status bar showed face and distance prompts."}, {"start_s": 6964.189, "end_s": 6974.45, "action": "Entered 3' and confirmed it, then orbited and zoomed far out to review the building model from multiple angles.", "intent": "Apply a three-foot modeling dimension and inspect the overall result.", "app": "SketchUp 2026", "details": "The final view showed the complete multi-room house model in perspective."}, {"start_s": 6974.45, "end_s": 6983.114, "action": "Exited the close modeling view, navigated around the full house, and zoomed back into the interior rooms and stair area.", "intent": "Review the model layout and inspect interior geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The view alternated between an overall model view and close views of rooms, furniture, walls, and stairs."}, {"start_s": 6983.114, "end_s": 6991.713, "action": "Orbited and zoomed through the house model, moving from exterior and upper-wall views toward interior rooms and the central hallway.", "intent": "Inspect the modeled rooms and wall arrangement from several angles.", "app": "SketchUp 2026", "details": "Orbit navigation was active; no distinct geometry change was clearly visible."}, {"start_s": 6991.713, "end_s": 7001.591, "action": "Navigated around the dining and living areas, typed a character, then dragged and clicked on a wall or face while the drawing tool remained active.", "intent": "Position or edit geometry near the interior partition and dining area.", "app": "SketchUp 2026", "details": "The final view showed a small active rectangle or selected face on the top edge of an interior wall."}, {"start_s": 7001.591, "end_s": 7011.693, "action": "Typed a short command sequence, pressed Enter, then orbited and zoomed the SketchUp camera to move from a close interior view to a wider view of two floor-plan models.", "intent": "Adjust the 3D view to inspect the architectural models.", "app": "SketchUp 2026", "details": null}, {"start_s": 7011.693, "end_s": 7022.267, "action": "Orbited and zoomed around the larger floor-plan model, shifting from a wide overview to a closer elevated view of its rooms and walls.", "intent": "Inspect the larger architectural model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 7022.267, "end_s": 7032.533, "action": "Paused briefly, then continued orbiting and zooming until the camera moved into a close overhead view of the interior rooms, stairs, and furnishings.", "intent": "Examine interior layout details in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 7032.533, "end_s": 7042.577, "action": "Orbited and zoomed across the model, first viewing a broad multi-room section and then moving to a closer view of two upper rooms and their fixtures before returning to a wider framing.", "intent": "Review different sections of the architectural layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 7042.577, "end_s": 7061.448, "action": "Continued navigating the SketchUp camera with repeated orbit and zoom gestures, inspecting the upper rooms and then pulling back to show both floor-plan models; clicked near the end of the span.", "intent": "Complete a visual review of the model from multiple scales.", "app": "SketchUp 2026", "details": null}, {"start_s": 7061.448, "end_s": 7071.352, "action": "Switched to the recorder window, then continued orbiting and zooming the visible SketchUp scene, moving from a close view of the larger model to a wider elevated overview of both models.", "intent": "Continue inspecting the architectural models after the application transition.", "app": "Screen recorder", "details": "The active window changed to the recorder, while the visible content remained the SketchUp modeling scene."}, {"start_s": 7071.352, "end_s": 7081.573, "action": "Orbit and zoom around the SketchUp architectural model, repeatedly scrolling and middle-clicking to inspect different views of the partitioned building.", "intent": "Inspect the 3D building layout from multiple angles and scales.", "app": "SketchUp 2026", "details": "Two building models remain visible in the SketchUp workspace."}, {"start_s": 7081.573, "end_s": 7091.601, "action": "Continue orbiting and zooming the SketchUp scene, moving from a distant overview to a closer angled view of the two partitioned building models.", "intent": "Review the overall arrangement and interior wall layout.", "app": "SketchUp 2026", "details": "The view ends with the larger building in the foreground and a smaller structure behind it."}, {"start_s": 7091.601, "end_s": 7100.608, "action": "Rotate and zoom the camera around the models, alternating between wider comparisons and angled views of the two floor-plan structures.", "intent": "Compare the building layouts from different viewpoints.", "app": "SketchUp 2026", "details": "Both structures remain visible throughout the span."}, {"start_s": 7100.608, "end_s": 7111.7, "action": "Zoom into the models and orbit around the smaller structure, bringing its interior partitions and stair-like floor detail into close view before repositioning the camera.", "intent": "Inspect interior geometry and partition details.", "app": "SketchUp 2026", "details": "The final view focuses on the smaller building while part of the larger model remains at the right edge."}, {"start_s": 7111.7, "end_s": 7120.202, "action": "Orbit and scroll around the smaller building model, shifting between a front overview and closer views of its walls, rooms, and surrounding rectangular base.", "intent": "Examine the smaller structure\u2019s room arrangement and exterior footprint.", "app": "SketchUp 2026", "details": "The camera ends close to the smaller model with the larger model partially visible on the right."}, {"start_s": 7120.202, "end_s": 7132.067, "action": "Continue orbiting and zooming out to show both building models together, then switch away from SketchUp to Windows Explorer and the recorder.", "intent": "Finish the model review and move to another desktop application.", "app": "SketchUp 2026", "details": "The span ends with an app transition to Windows Explorer and the recorder, followed by privacy masking."}, {"start_s": 7132.067, "end_s": 7142.554, "action": "Switched to the SketchUp window and orbited/zoomed around the room model, bringing the window opening and surrounding walls into view.", "intent": "Inspect the modeled room geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 7142.554, "end_s": 7152.909, "action": "Opened the View menu area, changed the camera/view orientation, and orbited and zoomed across the multi-room model, ending on a close view of a room with a window.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 7152.909, "end_s": 7162.886, "action": "Clicked and orbited around the model, then zoomed out to reveal several connected rooms and wall openings.", "intent": "Review the building layout and room connections.", "app": "SketchUp 2026", "details": null}, {"start_s": 7162.886, "end_s": 7173.12, "action": "Selected the model view and repeatedly orbited and zoomed out, exposing a broader overhead perspective of the rooms, partitions, windows, and floor areas.", "intent": "Inspect the overall building arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 7173.12, "end_s": 7183.057, "action": "Continued orbiting and zooming through the model, briefly moving close to wall geometry before settling on a room corner with a window opening.", "intent": "Examine wall and window geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 7183.057, "end_s": 7192.022, "action": "Orbited and zoomed around the room, then activated the tape-measure/guide tool and placed or dragged a guide point on the wall; the measurement read approximately 2' 3/16\".", "intent": "Measure or position a construction guide on the modeled wall.", "app": "SketchUp 2026", "details": "The final view shows the guide tool active with a visible guide point and a length readout of approximately 2' 3/16\"."}, {"start_s": 7192.022, "end_s": 7201.238, "action": "Entered 3 feet and confirmed it, clicked in the model, then entered 2 feet and confirmed it while placing a guide.", "intent": "Place measured construction guides in the SketchUp model.", "app": "SketchUp", "details": "Guide tool remained active and the Length field showed 3 feet during the first placement."}, {"start_s": 7201.238, "end_s": 7211.286, "action": "Scrolled and clicked in the model to position a guide, then entered 3 feet and confirmed the measurement.", "intent": "Position another measured construction guide.", "app": "SketchUp", "details": "The guide preview and Length field were visible; the model view remained zoomed into an interior wall."}, {"start_s": 7211.286, "end_s": 7221.416, "action": "Scrolled and adjusted the view, entered 4 feet and confirmed it, then switched to Push/Pull and selected the interior wall face, producing a highlighted face preview.", "intent": "Create a 4-foot guide and begin modifying the selected wall face.", "app": "SketchUp", "details": "The final screenshot shows the wall face highlighted with Push/Pull active."}, {"start_s": 7221.416, "end_s": 7231.688, "action": "Undid the prior operation, navigated around the model with orbiting and scrolling, and selected a wall area with Push/Pull; the view ended zoomed out over the building layout.", "intent": "Review or reposition the model while refining the wall edit.", "app": "SketchUp", "details": "The model was shown from an elevated perspective with multiple rooms, openings, and a selected wall face."}, {"start_s": 7231.688, "end_s": 7241.53, "action": "Navigated and zoomed out around the building, resized a Windows Explorer window, then continued orbiting and scrolling until the overall room layout was visible.", "intent": "Inspect the model from a broader perspective.", "app": "SketchUp", "details": "No Explorer content is visible in the supplied screenshots; the SketchUp model remains the primary workspace."}, {"start_s": 7241.53, "end_s": 7247.636, "action": "Orbited and scrolled to the central interior walls, typed a tool shortcut, and clicked to place or align a guide across the wall; the view ended with the guide spanning the room.", "intent": "Place or align another construction guide in the model.", "app": "SketchUp", "details": "The final screenshot shows a green guide line extending across the interior wall and the Length field displaying approximately 9 feet 9 7/16 inches."}, {"start_s": 7247.636, "end_s": 7259.225, "action": "Scrolled within the SketchUp model view while keeping the guide-placement tool active.", "intent": "Inspect the model from a different view.", "app": "SketchUp", "details": null}, {"start_s": 7259.225, "end_s": 7270.398, "action": "Entered 4 feet and later 3 feet with Enter, then clicked in the model view to position guide geometry.", "intent": "Set guide distances and place guides in the model.", "app": "SketchUp", "details": "The active guide tool displayed length values in the lower-right field."}, {"start_s": 7270.398, "end_s": 7280.662, "action": "Selected drawing tools, clicked to define a rectangular face on the wall, entered a positioning command, and switched to Push/Pull; the rectangular face became visible on the wall.", "intent": "Create and begin modifying a rectangular wall face.", "app": "SketchUp", "details": "The face was visible on the interior wall in the later screenshot."}, {"start_s": 7280.662, "end_s": 7290.449, "action": "Scrolled and orbited around the model, then drew another rectangular outline on a wall and adjusted the camera to inspect it.", "intent": "Position and inspect additional wall geometry.", "app": "SketchUp", "details": "The later view showed the rectangular outline on a wall within the room layout."}, {"start_s": 7290.449, "end_s": 7300.576, "action": "Clicked and dragged around the model, orbited to a wider view, and used undo commands while inspecting the room geometry.", "intent": "Adjust or review the model while revising recent geometry.", "app": "SketchUp", "details": "The view changed from a close wall view to a wider overhead view of the rooms."}, {"start_s": 7300.576, "end_s": 7310.775, "action": "Orbited and scrolled extensively around the model, then switched to the Select tool and left the camera focused on a wall and adjacent floor area.", "intent": "Navigate and inspect the architectural model.", "app": "SketchUp", "details": "The final screenshot showed the Select tool active and a close-up of the wall geometry."}, {"start_s": 7310.775, "end_s": 7321.066, "action": "Navigated around the SketchUp house model with orbit, middle-click, and scroll gestures, changing from a close interior view to a wider overhead view.", "intent": "Inspect the modeled rooms and adjust the 3D viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 7321.066, "end_s": 7330.846, "action": "Selected points and edges in the model, activated a guide-related tool, and entered 4-foot and 3-foot measurements, leaving a guide visible across the interior wall area.", "intent": "Create or position construction guides using measured distances.", "app": "SketchUp 2026", "details": "The status bar showed guide placement and a 4-foot length during the measured inputs."}, {"start_s": 7330.846, "end_s": 7339.963, "action": "Repositioned the camera around the interior wall, placed another measured guide, and entered a 3-foot distance; the guide remained visible with a length readout of approximately 3 feet 7 1/16 inches.", "intent": "Continue laying out measured construction guides on the wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 7339.963, "end_s": 7349.798, "action": "Entered a 4-foot measurement and activated rectangle and push/pull-related tools, drawing a rectangular outline on the wall and then moving the view toward the surrounding geometry.", "intent": "Create and modify a rectangular wall feature.", "app": "SketchUp 2026", "details": "A red rectangular outline was visible on the wall before the view shifted to a push/pull-style perspective."}, {"start_s": 7349.798, "end_s": 7360.435, "action": "Orbited and zoomed out around the house model, moving from the wall feature to a broad overhead view that showed multiple rooms, openings, and interior partitions.", "intent": "Review the overall model after the recent wall edits.", "app": "SketchUp 2026", "details": "The final evidence showed the complete house layout from above."}, {"start_s": 7360.435, "end_s": 7370.558, "action": "Orbited and zoomed back toward the interior rooms, focusing on a narrow partitioned room and the adjacent wall opening.", "intent": "Inspect the interior geometry from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 7370.558, "end_s": 7380.437, "action": "Orbited and zoomed around the SketchUp room model, changing from a close wall view to a broader overhead view of the rooms.", "intent": "Inspect the 3D building layout from different angles.", "app": "SketchUp", "details": null}, {"start_s": 7380.437, "end_s": 7390.289, "action": "Continued orbiting and zooming the SketchUp model, briefly interacting with the toolbar and ending on an elevated view of the selected room section.", "intent": "Review the room arrangement and model geometry.", "app": "SketchUp", "details": null}, {"start_s": 7390.289, "end_s": 7400.233, "action": "Orbited and zoomed closer around the room interiors, selected geometry, and typed a single character while navigating the model.", "intent": "Inspect and possibly prepare to edit a model element.", "app": "SketchUp", "details": "Typed 't' near the end of the span."}, {"start_s": 7400.233, "end_s": 7411.12, "action": "Selected the Tape Measure tool, placed a measurement guide on a wall, and entered 3' measurements to position guides in the room.", "intent": "Measure or lay out reference guides on the model walls.", "app": "SketchUp", "details": "Typed 3' followed by Enter twice."}, {"start_s": 7411.12, "end_s": 7420.643, "action": "Placed another guide and entered 3', then positioned a further guide and entered 4' followed by an additional character.", "intent": "Continue measuring and laying out reference guides in the room.", "app": "SketchUp", "details": "Typed 3' followed by Enter, then 4' followed by Enter and 'r'."}, {"start_s": 7420.643, "end_s": 7430.554, "action": "Interacted with faces and guides, typed a command character and a space, then orbited and zoomed out to review the room section and surrounding building model.", "intent": "Adjust or inspect the measured model area and review the overall layout.", "app": "SketchUp", "details": "Typed 'p' and later a space; the final view shows multiple room sections."}, {"start_s": 7430.554, "end_s": 7440.515, "action": "Orbit and zoom the SketchUp camera around the architectural model, then select a drawing tool and position the cursor over the wall area.", "intent": "Inspect and prepare the model view for editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 7440.515, "end_s": 7450.993, "action": "Activate the guide tool, click on the wall geometry, and enter 1'6\" measurements to place guide lines.", "intent": "Add construction guides at specified distances.", "app": "SketchUp 2026", "details": "The guide tool is active and the Measurements box shows 1'6\"."}, {"start_s": 7450.993, "end_s": 7462.349, "action": "Continue positioning the guide, click and adjust its placement, and enter an 8' measurement before returning to the selection tool.", "intent": "Lay out additional construction geometry on the wall.", "app": "SketchUp 2026", "details": "A guide line remains visible across the wall area."}, {"start_s": 7462.349, "end_s": 7472.178, "action": "Enter a 1' dimension, switch to a rectangle drawing tool, draw a small rectangular opening on the wall, and activate Push/Pull on the resulting face.", "intent": "Create and begin modifying a wall opening.", "app": "SketchUp 2026", "details": "A small rectangular face is visible on the wall and Push/Pull shows a distance of about 11 3/16\"."}, {"start_s": 7472.178, "end_s": 7482.77, "action": "Use Push/Pull and orbit/zoom controls around the model, adjusting the rectangular wall feature and inspecting it from multiple angles.", "intent": "Modify and review the new wall opening in context.", "app": "SketchUp 2026", "details": "The model view shifts to show the wall opening and adjacent rooms."}, {"start_s": 7482.77, "end_s": 7493.724, "action": "Orbit and zoom out around the architectural model to review the edited wall openings and overall floor layout from wider views.", "intent": "Inspect the completed geometry and overall model arrangement.", "app": "SketchUp 2026", "details": "The final view shows the multi-room structure, openings, and stair area."}, {"start_s": 7493.724, "end_s": 7503.766, "action": "Orbit the SketchUp camera around the house model, using middle-click and scroll gestures to change the viewing angle and zoom; ended on a higher angled view of the rooms.", "intent": "Inspect the 3D house model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 7503.766, "end_s": 7513.722, "action": "Zoom and orbit toward an exterior wall, select the Tape Measure tool, and click on the wall area to begin measuring or placing a guide.", "intent": "Measure or establish a guide on the modeled wall.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active and the status bar showed a measured length of approximately 10 3/16 inches."}, {"start_s": 7513.722, "end_s": 7523.516, "action": "Enter measurement values of 1 inch and place guide points on the wall, creating visible dashed guide lines across the face.", "intent": "Lay out reference guides at specified distances on the wall.", "app": "SketchUp 2026", "details": "Visible guide lines were added, including a diagonal guide and a short vertical measurement."}, {"start_s": 7523.516, "end_s": 7533.561, "action": "Enter 3-inch and 4-inch measurements with the Tape Measure tool, place additional guide points, then switch to Push/Pull and select the bounded wall face.", "intent": "Create measured construction guides and prepare a wall face for modification.", "app": "SketchUp 2026", "details": "The selected face was highlighted purple and the Push/Pull distance field showed approximately 3/4 inch."}, {"start_s": 7533.561, "end_s": 7543.542, "action": "Orbit and zoom around the wall, select the guided face, and use Push/Pull-related clicks to adjust or inspect the wall geometry from different angles.", "intent": "Modify or inspect the guided wall section in 3D.", "app": "SketchUp 2026", "details": "The view shifted to a close-up of the wall and adjacent opening; the selected face and construction guides remained visible."}, {"start_s": 7543.542, "end_s": 7554.213, "action": "Open the Camera menu, choose an alternate viewing command, then orbit and zoom back out around the house model for an overall inspection.", "intent": "Change the camera view and review the resulting model geometry.", "app": "SketchUp 2026", "details": "The final view showed the house exterior and interior partitions from an elevated oblique angle."}, {"start_s": 7554.213, "end_s": 7564.126, "action": "Orbited and zoomed around the SketchUp house model, moving from an exterior perspective to a higher view over the rooms and stair area.", "intent": "Inspect the 3D building layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 7564.126, "end_s": 7583.255, "action": "Orbited and zoomed the model, shifting from the overall house layout to a close-up of the stair and adjacent floor area.", "intent": "Examine the stair and surrounding geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 7583.255, "end_s": 7593.307, "action": "Returned to the SketchUp window and orbited and zoomed out to compare the smaller house model with the larger furnished model beside it.", "intent": "Review the relationship between the two building models.", "app": "SketchUp 2026", "details": null}, {"start_s": 7593.307, "end_s": 7608.97, "action": "Scrolled and adjusted the view to compare both models, then zoomed toward the smaller house and its interior stair area.", "intent": "Navigate the scene for closer inspection of the building layouts.", "app": "SketchUp 2026", "details": null}, {"start_s": 7608.97, "end_s": 7618.805, "action": "Zoomed deeply into the smaller model\u2019s stair and floor geometry, clicked several visible edges or faces, and left a group of floor lines highlighted in blue.", "intent": "Select and inspect floor or stair geometry.", "app": "SketchUp 2026", "details": "The final view shows selected blue edges across the floor pattern."}, {"start_s": 7618.805, "end_s": 7629.068, "action": "Clicked repeatedly across adjacent floor divisions, making brief selections and drags while keeping the camera tightly zoomed on the floor and wall junction.", "intent": "Inspect or select individual floor segments in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 7629.068, "end_s": 7639.299, "action": "Orbited and zoomed around the SketchUp room model, changing from a close view of the outlined floor feature to a wider view of the surrounding walls and floor.", "intent": "Inspect the model from different angles and distances.", "app": "SketchUp", "details": null}, {"start_s": 7639.299, "end_s": 7649.336, "action": "Zoomed into the outlined floor feature, activated the Rectangle tool, and clicked along its edges to position or draw geometry.", "intent": "Add or adjust a rectangular detail on the model floor.", "app": "SketchUp", "details": "The Rectangle tool was active and an inference tooltip showed \u201cOn Edge.\u201d"}, {"start_s": 7649.336, "end_s": 7660.004, "action": "Clicked and dragged across several floor edges, then switched back to the Select tool and continued navigating the close-up model view.", "intent": "Refine or select the newly positioned floor geometry.", "app": "SketchUp", "details": null}, {"start_s": 7660.004, "end_s": 7670.325, "action": "Selected the outlined floor shape, then activated Push/Pull and pulled it upward to create a raised three-dimensional feature.", "intent": "Extrude the floor outline into a solid architectural element.", "app": "SketchUp", "details": "The selected outline was highlighted blue, and the final Push/Pull distance displayed approximately 1' 2 3/8\"."}, {"start_s": 7670.325, "end_s": 7680.375, "action": "Entered a 10-foot distance and confirmed it, then zoomed out and navigated to review the resulting raised feature within the larger building model.", "intent": "Set the extrusion height and inspect the result in context.", "app": "SketchUp", "details": "The Push/Pull distance field showed 10' before the view was zoomed out."}, {"start_s": 7680.375, "end_s": 7690.23, "action": "Orbited and zoomed through the building model, moving from a wider overview into close views of interior walls, openings, and a stair area.", "intent": "Inspect surrounding architectural geometry after the extrusion.", "app": "SketchUp", "details": null}, {"start_s": 7690.23, "end_s": 7700.345, "action": "Clicked and dragged around the SketchUp model while adjusting the view, then made several clicks and minor scroll inputs; left a blue edge visible on the wall geometry.", "intent": "Inspect or modify the visible wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 7700.345, "end_s": 7710.659, "action": "Switched to the Eraser tool, navigated around the model with repeated scroll and drag inputs, and zoomed/orbited out to reveal the surrounding building layout.", "intent": "Review the model and erase or inspect selected edges.", "app": "SketchUp 2026", "details": "The view changed from a close wall inspection to an elevated view of the building enclosure."}, {"start_s": 7710.659, "end_s": 7720.615, "action": "Dragged extensively with the Eraser tool while orbiting around the enclosure, then clicked and scrolled to inspect the edited wall surfaces from another angle.", "intent": "Erase or inspect wall edges and geometry.", "app": "SketchUp 2026", "details": "The enclosure remained visible with the stair area and wall faces shown from changing viewpoints."}, {"start_s": 7720.615, "end_s": 7729.875, "action": "Clicked and dragged through the SketchUp workspace, switched to orbit navigation, and rotated and zoomed the camera from a broad view of multiple floor plans into a close view of the wall enclosure.", "intent": "Navigate the model to inspect the building layout and enclosure.", "app": "SketchUp 2026", "details": "The final view focused closely on a U-shaped interior wall and adjacent stairs."}, {"start_s": 7729.875, "end_s": 7738.498, "action": "Scrolled and used middle-button navigation to orbit and reposition the camera around the enclosure, bringing the U-shaped wall and surrounding rooms into a more centered view.", "intent": "Inspect the enclosure and adjacent room geometry.", "app": "SketchUp 2026", "details": "System configuration and connectivity changes occurred briefly during the span without a visible application change."}, {"start_s": 7738.498, "end_s": 7747.072, "action": "Scrolled and used repeated middle-button navigation to move through the building model, shifting from the U-shaped wall to a close view of the stair run and adjacent walls.", "intent": "Continue inspecting the interior building geometry.", "app": "SketchUp 2026", "details": "The final view centered on the stairs between tall wall faces."}, {"start_s": 7747.072, "end_s": 7757.988, "action": "Scrolled within the SketchUp model, typed a character, and clicked near the lower stair area while the drawing tool remained active.", "intent": "Continue positioning or editing geometry in the stair area.", "app": "SketchUp 2026", "details": null}, {"start_s": 7757.988, "end_s": 7763.945, "action": "Clicked and dragged around the lower stair face, opened a context menu, and then clicked elsewhere to dismiss it and return to the model.", "intent": "Select or modify the stair geometry using contextual editing options.", "app": "SketchUp 2026", "details": "The context menu visibly included Entity Info, Erase, Hide, Select, Make Group, Reverse Faces, and other modeling commands."}, {"start_s": 7763.945, "end_s": 7783.945, "action": "Remained idle in SketchUp with the Push/Pull tool active and a lower stair face selected.", "intent": "Pause while reviewing the selected model face.", "app": "SketchUp 2026", "details": null}, {"start_s": 7783.945, "end_s": 7798.326, "action": "Resumed after a brief system interruption and scrolled the SketchUp view, keeping the selected stair face and Push/Pull tool active.", "intent": "Adjust the camera view to inspect the stair geometry.", "app": "SketchUp 2026", "details": "The view shifted to show more of the surrounding floor-plan geometry."}, {"start_s": 7798.326, "end_s": 7818.326, "action": "Scrolled and zoomed out from the stair area, typed spaces, and clicked the model, ending on a wider overhead view of the floor plan.", "intent": "Review the broader building layout and reposition the view.", "app": "SketchUp 2026", "details": null}, {"start_s": 7818.326, "end_s": 7838.326, "action": "Remained idle in SketchUp on the wider overhead floor-plan view.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 7838.326, "end_s": 7858.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7858.326, "end_s": 7878.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7878.326, "end_s": 7898.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7898.326, "end_s": 7918.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7918.326, "end_s": 7938.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7938.326, "end_s": 7958.326, "action": "Remained inactive while the SketchUp model view stayed fixed on the building layout.", "intent": "No interaction was recorded; the model remained under review.", "app": "SketchUp 2026", "details": null}, {"start_s": 7958.326, "end_s": 7978.326, "action": "Remained idle while the SketchUp model view stayed unchanged.", "intent": "Pause or review the current 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 7978.326, "end_s": 7998.326, "action": "Remained idle while viewing the unchanged SketchUp architectural model.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 7998.326, "end_s": 8018.326, "action": "Scrolled repeatedly to zoom the SketchUp camera into the interior rooms and stair area.", "intent": "Inspect the interior geometry more closely.", "app": "SketchUp 2026", "details": "The view changed from a wider floor-plan perspective to a close-up of walls and stairs."}, {"start_s": 8018.326, "end_s": 8029.648, "action": "Continued scrolling and middle-clicking to navigate the 3D view, then orbited to a higher angled view of the stairwell and surrounding rooms.", "intent": "Reposition the camera to inspect the model from different angles.", "app": "SketchUp 2026", "details": "The Orbit tool became active and the model shifted to an overhead perspective."}, {"start_s": 8029.648, "end_s": 8039.38, "action": "Middle-clicked and scrolled through the model, orbiting and zooming across the upper walls, stairwell, and adjacent room.", "intent": "Examine additional interior surfaces and spatial relationships.", "app": "SketchUp 2026", "details": "The camera moved into a close view and then pulled back to show the stairwell and surrounding walls."}, {"start_s": 8039.38, "end_s": 8052.057, "action": "Continued middle-click navigation and scrolling, moving from a close interior view to a wider overhead view of the architectural layout.", "intent": "Review the model from broader and alternate viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the stairwell, rooms, windows, and a separate upper structure."}, {"start_s": 8052.057, "end_s": 8060.534, "action": "Scrolled and orbited the SketchUp model, clicked within the view, and entered a partial \u201cp \u201d keystroke sequence while repositioning the camera around the stair and rooms.", "intent": "Inspect and navigate the 3D house model.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall/stair area to a broader overhead view of rooms and stairs."}, {"start_s": 8060.534, "end_s": 8070.537, "action": "Scrolled and orbited around the model to adjust the camera, progressively reframing the upper rooms, stairway, and surrounding walls.", "intent": "Continue inspecting the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": "No geometry edits are visibly confirmed."}, {"start_s": 8070.537, "end_s": 8081.161, "action": "Scrolled and orbited the model, moving from a close view of the stair and enclosed room to a wider overhead view of the house interior.", "intent": "Review the layout and stair area from alternate angles.", "app": "SketchUp 2026", "details": "The model remains unchanged while the camera viewpoint shifts."}, {"start_s": 8081.161, "end_s": 8091.288, "action": "Scrolled and orbited repeatedly, then changed the camera to a steep overhead angle and ended on a close-up of the staircase.", "intent": "Inspect the staircase and adjacent rooms in the 3D model.", "app": "SketchUp 2026", "details": "The Orbit tool is visibly active in the final screenshot."}, {"start_s": 8091.288, "end_s": 8111.288, "action": "Made a small scroll adjustment and then remained inactive while the SketchUp view stayed focused on the staircase.", "intent": "Pause while reviewing the current model view.", "app": "SketchUp 2026", "details": "System configuration and connectivity changes were recorded during the otherwise inactive interval."}, {"start_s": 8111.288, "end_s": 8121.512, "action": "Scrolled and zoomed/orbited closer to the staircase, then entered a partial \u201cp \u201d keystroke sequence while keeping the stair area centered.", "intent": "Refine the camera view for continued inspection of the staircase.", "app": "SketchUp 2026", "details": "The final view is a close-up of the stair treads and surrounding walls."}, {"start_s": 8121.512, "end_s": 8135.754, "action": "Clicked repeatedly in the SketchUp model, entered a distance beginning with \u201cp,\u201d and then typed \u201c6.2\u201d into the active measurement field.", "intent": "Adjust the selected stair or landing geometry using a numeric distance.", "app": "SketchUp 2026", "details": "A stair tread/landing face remained selected and the Distance field was active."}, {"start_s": 8135.754, "end_s": 8145.765, "action": "Confirmed the entered value, orbited and zoomed out through the model, and changed the view from a close stair detail to an overview of the building models.", "intent": "Inspect the edited geometry in the broader model context.", "app": "SketchUp 2026", "details": "The final view showed two building models with the stair area still being edited."}, {"start_s": 8145.765, "end_s": 8155.358, "action": "Orbited and zoomed around the building model, then returned to a close-up of the stair area and selected a stair or landing component.", "intent": "Reposition the view and select the stair geometry for further editing.", "app": "SketchUp 2026", "details": "The final screenshot showed a white stair element outlined in blue."}, {"start_s": 8155.358, "end_s": 8167.525, "action": "Navigated around the selected stair element and activated the Move/Copy operation, leaving the element selected with a copy/move inference point visible.", "intent": "Prepare to duplicate or reposition the stair element.", "app": "SketchUp 2026", "details": "The status bar indicated that copying or moving the pre-selected item had begun."}, {"start_s": 8167.525, "end_s": 8176.974, "action": "Clicked to position the copied stair element and continued adjusting its placement, leaving a translucent overlapping copy visible in the stairwell.", "intent": "Place a duplicate stair or landing segment in the model.", "app": "SketchUp 2026", "details": "The copied geometry appeared offset from the original while the placement operation remained active."}, {"start_s": 8176.974, "end_s": 8186.964, "action": "Orbited and zoomed through the stairwell while continuing the active copy/move operation, repositioning the view to inspect the selected stair segment from multiple angles.", "intent": "Inspect and refine the placement of the copied stair geometry.", "app": "SketchUp 2026", "details": "The selected stair segment remained outlined in blue as the camera moved to a wider stairwell view."}, {"start_s": 8186.964, "end_s": 8197.262, "action": "Orbit and zoom around the stair model, select a stair component, and begin moving or copying it; leave the selected tread outlined in blue with a distance readout visible.", "intent": "Adjust the position of a stair component in the 3D model.", "app": "SketchUp 2026", "details": "Move/copy tool remains active on the selected stair tread."}, {"start_s": 8197.262, "end_s": 8207.538, "action": "Continue navigating around the stairs and reposition the selected tread, changing the view and distance while keeping the component selected.", "intent": "Refine placement of the stair component.", "app": "SketchUp 2026", "details": "Selected stair geometry remains highlighted and the move/copy distance updates."}, {"start_s": 8207.538, "end_s": 8217.55, "action": "Orbit and zoom to a different side of the stair assembly, then continue moving the selected component along the model.", "intent": "Inspect and adjust the stair component from another viewpoint.", "app": "SketchUp 2026", "details": "Move tool remains active with the selected component outlined in blue."}, {"start_s": 8217.55, "end_s": 8227.562, "action": "Orbit and zoom around the selected stair tread, inspect its edges and grips, and continue the active move operation.", "intent": "Fine-tune the selected stair geometry while checking its alignment.", "app": "SketchUp 2026", "details": "The selected tread stays highlighted; no confirmed placement is visible."}, {"start_s": 8227.562, "end_s": 8237.547, "action": "Orbit out to a wider view of the building and stairwell, then navigate back toward the stair assembly while keeping a stair element selected.", "intent": "Review the stair component in the surrounding model context.", "app": "SketchUp 2026", "details": "The wider model view shows the stairwell and selected stair geometry."}, {"start_s": 8237.547, "end_s": 8247.688, "action": "Switch to the Select tool, navigate around the building with orbit and zoom gestures, and end on a close view of a wall or surface with no object visibly selected.", "intent": "Inspect the surrounding model and exit the active component adjustment.", "app": "SketchUp 2026", "details": "The final view is mostly a large gray surface; no confirmed geometry edit is visible."}, {"start_s": 8247.688, "end_s": 8257.686, "action": "Orbit the SketchUp camera around the modeled stairwell and adjacent walls using middle-click navigation, changing from a close stair view to an overhead view.", "intent": "Inspect the stair geometry and surrounding layout from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 8257.686, "end_s": 8267.754, "action": "Orbit and adjust the camera around the stairwell, then click a stair tread to select it and continue navigating to an overhead view.", "intent": "Review the stair area and select a tread or related face for editing.", "app": "SketchUp 2026", "details": "A stair tread is visibly selected in blue by the end of the span."}, {"start_s": 8267.754, "end_s": 8278.427, "action": "Navigate to a wall and use the drawing tool to create or mark a rectangular face area, then click it so the new face becomes selected.", "intent": "Create and select a rectangular surface in the modeled interior.", "app": "SketchUp 2026", "details": "The final view shows a rectangular face selected with a stippled highlight."}, {"start_s": 8278.427, "end_s": 8288.857, "action": "Edit the selected rectangular face with keyboard input and clicks, then activate Push/Pull and apply it to the face to extrude the geometry.", "intent": "Extrude the newly created rectangular face into a 3D element.", "app": "SketchUp 2026", "details": "The face is visibly extruded, and the Push/Pull distance field shows approximately 4' 11 1/16\"."}, {"start_s": 8288.857, "end_s": 8297.459, "action": "Continue adjusting the camera around the extruded face, then enter a numeric dimension of 6 inches for the active Push/Pull operation.", "intent": "Set the extrusion depth precisely.", "app": "SketchUp 2026", "details": "The selected face remains active and the distance field is being edited."}, {"start_s": 8297.459, "end_s": 8307.235, "action": "Correct the numeric Push/Pull entry with backspaces and additional typing, leaving the distance field displaying 6.", "intent": "Refine the exact extrusion measurement.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly reads 6."}, {"start_s": 8307.235, "end_s": 8317.972, "action": "Typed a command and navigated the SketchUp model with scrolling and orbit gestures, ending on a close view of a selected rectangular surface.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "A rectangular face remained outlined in blue in the final view."}, {"start_s": 8317.972, "end_s": 8327.767, "action": "Continued orbiting and scrolling around the selected model geometry, then initiated a move operation from a corner; the view ended with a distance readout visible.", "intent": "Adjust or inspect the position of selected geometry.", "app": "SketchUp 2026", "details": "Status text indicated an active move operation with a distance of about 3' 5 11/16\"."}, {"start_s": 8327.767, "end_s": 8337.781, "action": "Scrolled and orbited around the model while the move tool remained active, clicking several points and changing the camera to a close-up of connected wall and floor edges.", "intent": "Continue positioning or examining selected geometry.", "app": "SketchUp 2026", "details": "The selected edges stayed blue and the distance readout changed during the operation."}, {"start_s": 8337.781, "end_s": 8348.104, "action": "Navigated through the building model with orbit and zoom gestures, briefly interacting with the view, then returned to a broader overhead view of rooms and stairs.", "intent": "Review the building layout from different viewpoints.", "app": "SketchUp 2026", "details": "The view shifted from a close stair area to an overall floor-plan perspective."}, {"start_s": 8348.104, "end_s": 8358.389, "action": "Orbited and zoomed out substantially, revealing two separate building or floor-plan assemblies, then zoomed back toward the nearer one and its stair area.", "intent": "Compare and inspect the modeled building assemblies.", "app": "SketchUp 2026", "details": "The final view showed the nearer floor plan in detail with another assembly visible in the background."}, {"start_s": 8358.389, "end_s": 8368.283, "action": "Clicked repeatedly along the stair steps and nearby geometry, then zoomed and orbited outward to show the complete nearer floor plan alongside the second assembly.", "intent": "Inspect stair geometry and overall model placement.", "app": "SketchUp 2026", "details": "The stair area was selected or targeted during the close inspection; the final view showed both assemblies."}, {"start_s": 8368.283, "end_s": 8377.938, "action": "Orbited and zoomed around the stairwell and adjacent walls, then switched back to selection after navigating the model.", "intent": "Inspect the stair geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 8377.938, "end_s": 8387.866, "action": "Continued navigating around the stairs with orbit and zoom gestures, selected drawing tools, and positioned the cursor on a stair tread.", "intent": "Prepare to modify or annotate the stair geometry.", "app": "SketchUp 2026", "details": "The drawing tool status bar indicated that the first corner could be set, and a small guide/rectangle marker appeared on the stair area."}, {"start_s": 8387.866, "end_s": 8397.736, "action": "Clicked and dragged around the stair tread, typed a single character, activated Push/Pull, and orbited out to a wider view of the stairwell.", "intent": "Select and begin editing a stair surface.", "app": "SketchUp 2026", "details": "A stair face was highlighted while Push/Pull was active, with the distance still shown as 0 inches."}, {"start_s": 8397.736, "end_s": 8408.963, "action": "Orbited and zoomed toward the lower stairs, then switched to the guide tool and clicked on a stair edge to position a guide.", "intent": "Inspect and mark the stair geometry.", "app": "SketchUp 2026", "details": "The guide tool displayed a measured length while the view focused closely on the stair treads."}, {"start_s": 8408.963, "end_s": 8418.536, "action": "Entered 6.2 inches and pressed Enter to set the guide length, then clicked near the lower stair edge and left the guide tool active.", "intent": "Create a precisely measured guide on the stairs.", "app": "SketchUp 2026", "details": "The status bar showed Length: 6.2 inches."}, {"start_s": 8418.536, "end_s": 8429.306, "action": "Zoomed and orbited around the stairwell, dragged across a stair surface, and clicked several stair areas while switching tools and typing brief characters.", "intent": "Continue inspecting and editing the stair geometry.", "app": "SketchUp 2026", "details": "The final view was a close-up of the stair treads beneath an overhanging landing."}, {"start_s": 8429.306, "end_s": 8439.205, "action": "Entered a distance value of 6.2 inches for the active SketchUp tool, confirmed it, adjusted the view with scrolling, and selected the rectangular face.", "intent": "Set a precise dimension and inspect the resulting geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 8439.205, "end_s": 8449.605, "action": "Scrolled through the model, selected the rectangular component, and began moving it with the Move tool, leaving the object highlighted.", "intent": "Position the selected component in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 8449.605, "end_s": 8460.072, "action": "Navigated and orbited around the model with middle-click actions and scrolling, then adjusted the view around a selected narrow edge or face.", "intent": "Inspect the component from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 8460.072, "end_s": 8471.026, "action": "Orbited and repositioned the view, selected a larger rectangular piece, and manipulated it with the Move tool while scrolling to inspect its placement.", "intent": "Adjust and inspect the placement of the selected model component.", "app": "SketchUp 2026", "details": null}, {"start_s": 8471.026, "end_s": 8481.263, "action": "Orbited and scrolled to another area of the model, selected a long rectangular strip, and continued navigating around the selected geometry.", "intent": "Inspect and prepare the long component for further editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 8481.263, "end_s": 8490.321, "action": "Selected the long rectangular face, scrolled and zoomed closer, and continued moving or positioning it near the model edge with the Move tool active.", "intent": "Precisely position the selected long component.", "app": "SketchUp 2026", "details": null}, {"start_s": 8490.321, "end_s": 8500.457, "action": "Navigated the SketchUp model with repeated orbit and zoom gestures, moving from a close-up selected edge to an overview of two building layouts.", "intent": "Inspect the overall 3D model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 8500.457, "end_s": 8510.152, "action": "Continued orbiting and zooming around the building model, opened the View menu, and displayed the section-fill option before moving into a close stair-area view.", "intent": "Inspect model sections and interior circulation.", "app": "SketchUp 2026", "details": "The View menu was open briefly, with Section Fill highlighted."}, {"start_s": 8510.152, "end_s": 8520.38, "action": "Orbited and zoomed through the model, briefly moving past a mostly empty view before returning to an elevated overview of the rooms and stairwell.", "intent": "Review the building geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 8520.38, "end_s": 8529.79, "action": "Zoomed into a wall and floor junction, selected geometry, typed a single \u201cm,\u201d and activated the Move tool with the selected edge ready to reposition.", "intent": "Prepare to move selected model geometry.", "app": "SketchUp 2026", "details": "The Move tool status bar showed a distance of approximately 4 1/2 inches."}, {"start_s": 8529.79, "end_s": 8539.226, "action": "Orbited and zoomed around the stair and wall geometry, briefly viewing a close stair landing before navigating to a blank area of the model workspace.", "intent": "Inspect the selected or moved architectural elements.", "app": "SketchUp 2026", "details": null}, {"start_s": 8539.226, "end_s": 8550.084, "action": "Returned to an overview of both building layouts, then orbited and zoomed into the interior walls and window opening of the right-hand structure.", "intent": "Continue reviewing the architectural model and compare its layouts.", "app": "SketchUp 2026", "details": null}, {"start_s": 8550.084, "end_s": 8559.951, "action": "Orbited and zoomed the SketchUp camera around the modeled rooms and staircase, bringing the stair area into closer view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 8559.951, "end_s": 8570.464, "action": "Continued orbiting and zooming around the staircase and adjacent walls, ending on a close view of the stair landing and steps.", "intent": "Examine the staircase geometry.", "app": "SketchUp", "details": null}, {"start_s": 8570.464, "end_s": 8580.859, "action": "Orbited and zoomed further toward the stair landing and treads, shifting from an angled view to a close-up of the landing edge and stairs.", "intent": "Inspect stair details from close viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 8580.859, "end_s": 8592.068, "action": "Selected the stair landing edge, typed \u201cm,\u201d and used the Move tool while zooming and adjusting the view; the selected geometry remained highlighted with a distance readout.", "intent": "Modify or prepare to move a staircase component.", "app": "SketchUp", "details": "The Move tool was active and the selected stair geometry remained highlighted."}, {"start_s": 8592.068, "end_s": 8601.616, "action": "Zoomed and orbited around the selected stair components, then clicked several times to continue positioning or manipulating the highlighted geometry.", "intent": "Continue adjusting the staircase component.", "app": "SketchUp", "details": "The selected stair geometry remained highlighted while the Move tool distance readout changed."}, {"start_s": 8601.616, "end_s": 8611.192, "action": "Orbited and zoomed back to show multiple stairs and the adjacent opening, then continued clicking the selected stair component with the Move tool active.", "intent": "Position and inspect the moved staircase geometry.", "app": "SketchUp", "details": "The staircase component stayed selected with blue edges and the Move tool remained active."}, {"start_s": 8611.192, "end_s": 8620.8, "action": "Orbit and zoom around the stair assembly, clicking and scrolling to inspect different stair sections while keeping a stair component selected.", "intent": "Inspect the modeled staircase from multiple angles.", "app": "SketchUp 2026", "details": "The 3D building model remained visible with stair geometry highlighted."}, {"start_s": 8620.8, "end_s": 8630.515, "action": "Orbit and zoom toward a stair flight, then click the upper stair component to select it and inspect it closely.", "intent": "Examine and select a stair component.", "app": "SketchUp 2026", "details": "A rectangular stair element was visibly selected with blue edges and grips."}, {"start_s": 8630.515, "end_s": 8640.421, "action": "Click around the stair geometry, orbit and zoom away from the selected component, and switch back to a broader model view.", "intent": "Review the stair placement within the surrounding building model.", "app": "SketchUp 2026", "details": "The view moved from the stair flight to surrounding walls and rooms."}, {"start_s": 8640.421, "end_s": 8650.058, "action": "Orbit and zoom through the building interior, moving from a wider stair view to a close view of the landing and adjacent steps.", "intent": "Inspect the stair and landing arrangement from interior angles.", "app": "SketchUp 2026", "details": "No new geometry was visibly created; the camera position changed substantially."}, {"start_s": 8650.058, "end_s": 8659.953, "action": "Orbit and zoom out across the building, reviewing the stair core and surrounding rooms from progressively wider angles.", "intent": "Review the overall stair layout in the building model.", "app": "SketchUp 2026", "details": "The model transitioned from a close stair view to a broad overhead view."}, {"start_s": 8659.953, "end_s": 8669.539, "action": "Select near the stair area, then orbit and zoom to reposition the camera over the building and inspect the stair core and adjacent rooms.", "intent": "Continue reviewing the building and staircase from overhead perspectives.", "app": "SketchUp 2026", "details": "The final view showed the stair flights and central enclosed structure from above."}, {"start_s": 8669.539, "end_s": 8680.07, "action": "Scrolled and orbited around the SketchUp model, then clicked and typed while navigating the stair and wall geometry.", "intent": "Inspect and adjust the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 8680.07, "end_s": 8690.077, "action": "Selected a rectangular face near the stairs, activated a drawing tool, and entered keyboard commands while clicking the face and surrounding geometry.", "intent": "Create or modify geometry on the stair-side face.", "app": "SketchUp 2026", "details": "The rectangular face was visibly selected by the end of the span."}, {"start_s": 8690.077, "end_s": 8700.035, "action": "Entered additional numeric and keyboard input, selected the rectangular face, and moved geometry; the view then shifted to show the face and adjacent wall from a different angle.", "intent": "Position or resize the selected model element.", "app": "SketchUp 2026", "details": "The status bar showed a move operation with a distance of about 1 3/16 inches."}, {"start_s": 8700.035, "end_s": 8709.905, "action": "Scrolled and orbited around the stair assembly, clicked the upper stair and nearby geometry, and continued navigating the model view.", "intent": "Inspect the stair geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The stair treads and an upper rectangular element remained visible, with selection outlines appearing during the inspection."}, {"start_s": 8709.905, "end_s": 8719.869, "action": "Orbited and zoomed out from the stair area, then continued rotating the model to reveal the surrounding rooms, walls, and an elevated rectangular slab.", "intent": "Review the modified area in the context of the wider model.", "app": "SketchUp 2026", "details": null}, {"start_s": 8719.869, "end_s": 8728.903, "action": "Scrolled and orbited farther upward and outward, revealing a broader overhead view of the floor plan, rooms, windows, walls, and staircases.", "intent": "Inspect the overall 3D layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 8728.903, "end_s": 8738.698, "action": "Orbited and adjusted the SketchUp view around the stairwell, then continued navigating with middle-clicks and scrolls.", "intent": "Inspect the stair geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 8738.698, "end_s": 8748.7, "action": "Activated a drawing tool, entered brief keyboard inputs, drew a narrow rectangular face across the stair area, and right-clicked the selected face to open its context menu.", "intent": "Create and inspect a rectangular stair-area element.", "app": "SketchUp 2026", "details": "The selected face is shown with a context menu containing options such as Erase, Hide, Select, and Make Group."}, {"start_s": 8748.7, "end_s": 8756.346, "action": "Dismissed the context menu, selected the rectangular face, and activated Push/Pull to set its distance to 6.", "intent": "Adjust the depth of the rectangular stair-area face.", "app": "SketchUp 2026", "details": "The Push/Pull tool is active and the Distance field shows 6."}, {"start_s": 8756.346, "end_s": 8765.954, "action": "Navigated away from the close-up with scrolls and middle-click orbiting, changing to a wider overhead view of the stairwell and surrounding walls.", "intent": "Review the edited stair geometry in the larger model.", "app": "SketchUp 2026", "details": null}, {"start_s": 8765.954, "end_s": 8779.711, "action": "Selected and navigated around the model, using scrolls and orbiting to move from the stair close-up to a broad overhead view of the building interior.", "intent": "Inspect the stairwell and adjacent rooms from a wider perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 8779.711, "end_s": 8783.817, "action": "Orbited and zoomed toward the stairs, then activated the Tape Measure tool and placed a measurement point along the left stair wall.", "intent": "Measure or establish a reference along the stairwell.", "app": "SketchUp 2026", "details": "The Tape Measure tool is active and the Length field shows approximately 2' 3 7/8\"."}, {"start_s": 8783.817, "end_s": 8803.817, "action": "Remained idle in SketchUp with the 3D stair and surrounding walls visible.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 8803.817, "end_s": 8810.131, "action": "Scrolled and middle-clicked to orbit or navigate around the building model, changing from a close stair view to an overhead view of the stairwell and adjacent rooms.", "intent": "Inspect the stair layout and surrounding geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 8810.131, "end_s": 8823.421, "action": "Paused on the overhead stairwell view, then typed two spaces without a visible model change.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 8823.421, "end_s": 8832.846, "action": "Scrolled and navigated to a close-up of the stair, selected a step face, activated the Push/Pull tool, and entered a distance of 0.52 inches before confirming; then pressed undo.", "intent": "Modify the stair-step geometry and adjust the result.", "app": "SketchUp 2026", "details": "The selected stair face is visible with the Push/Pull tool active and a distance field shown."}, {"start_s": 8832.846, "end_s": 8842.458, "action": "Selected the stair face again, replaced the distance entry with 5.2 inches, and confirmed the Push/Pull operation.", "intent": "Set the stair-step extrusion to a larger measured distance.", "app": "SketchUp 2026", "details": "The stair tread face remains selected after the measured Push/Pull adjustment."}, {"start_s": 8842.458, "end_s": 8852.671, "action": "Scrolled and navigated around the edited stair, selected the step geometry, typed a character, and switched to the Move/Copy tool, leaving the stair component outlined with move handles.", "intent": "Inspect and begin repositioning or copying the edited stair geometry.", "app": "SketchUp 2026", "details": "The final view shows the stair-step geometry selected in blue with the Move/Copy tool active."}, {"start_s": 8852.671, "end_s": 8862.79, "action": "Scrolled and orbited around the SketchUp stair model, selected a stair or landing element, and began moving it with the Move tool before changing the viewpoint.", "intent": "Adjust or inspect a stair-related model component.", "app": "SketchUp 2026", "details": "A stair and landing assembly remained visible; the Move tool status and distance field appeared."}, {"start_s": 8862.79, "end_s": 8872.655, "action": "Orbited and zoomed around the stairwell, selected an edge or face, and moved the selected geometry by a small measured distance.", "intent": "Position or refine stairwell geometry.", "app": "SketchUp 2026", "details": "The model showed a selected blue-edged stair element and a visible distance of approximately 5/16 inch."}, {"start_s": 8872.655, "end_s": 8881.372, "action": "Orbited to a wider view of the building, selected and dragged stair-area geometry, and continued a measured Move operation while inspecting the result.", "intent": "Modify and review the placement of stair components.", "app": "SketchUp 2026", "details": "The building layout and stairwell were visible; the Move tool remained active with a measured distance."}, {"start_s": 8881.372, "end_s": 8891.935, "action": "Orbited and zoomed around the stairwell and adjacent rooms, repeatedly adjusting the camera to inspect the stairs, landings, and surrounding walls.", "intent": "Review the stairwell model from multiple angles.", "app": "SketchUp 2026", "details": "No clearly identifiable new geometry was created; the view changed substantially around the stair assembly."}, {"start_s": 8891.935, "end_s": 8902.072, "action": "Selected and manipulated a stair-area element, then zoomed and orbited out to review the stairwell within the larger building model.", "intent": "Refine or inspect stair geometry in context.", "app": "SketchUp 2026", "details": "The final view showed the stairwell and multiple surrounding rooms from above."}, {"start_s": 8902.072, "end_s": 8912.136, "action": "Orbited and zoomed into the stair landing, selected the upper landing slab, and initiated a Move operation on it.", "intent": "Adjust the position of the stair landing slab.", "app": "SketchUp 2026", "details": "The upper landing was outlined in blue and the Move tool distance field showed approximately 1 1/16 inches."}, {"start_s": 8912.136, "end_s": 8922.012, "action": "Clicked and scrolled around the selected stair component, adjusting the close-up view of the steps.", "intent": "Inspect or position the selected stair element.", "app": "SketchUp 2026", "details": "A stair piece remained highlighted in blue while the camera view shifted."}, {"start_s": 8922.012, "end_s": 8932.064, "action": "Orbit-scrolled around the model from the stair close-up to a wider overhead view, then returned toward the stair area and clicked a stair surface.", "intent": "Review the stair placement within the surrounding building model.", "app": "SketchUp 2026", "details": "The view alternated between the full house layout and the stair assembly."}, {"start_s": 8932.064, "end_s": 8941.838, "action": "Scrolled and orbited around the stairwell, clicking near the upper stair component and changing the viewing angle to inspect it beside the surrounding walls.", "intent": "Inspect the selected stair geometry from multiple angles.", "app": "SketchUp 2026", "details": "The upper stair element was visibly outlined in blue."}, {"start_s": 8941.838, "end_s": 8951.301, "action": "Orbited and scrolled around the building, moving from the stairwell to an adjacent wall opening and back toward the stairs while keeping the stair component selected.", "intent": "Examine the stair component's fit relative to nearby walls and openings.", "app": "SketchUp 2026", "details": "The selected rectangular stair piece remained highlighted as the camera moved around it."}, {"start_s": 8951.301, "end_s": 8961.244, "action": "Clicked the stair area and orbited closer, then shifted to a side view showing the selected rectangular element extending across the stair opening.", "intent": "Inspect the selected element's position and extent across the stairwell.", "app": "SketchUp 2026", "details": "The component stayed selected with blue edges and inference grips visible."}, {"start_s": 8961.244, "end_s": 8970.898, "action": "Scrolled and orbited out to a broad overhead view of the house, briefly clicked in the model, and ended with the main Select tool active and no object visibly selected.", "intent": "Review the overall building layout after inspecting the stair assembly.", "app": "SketchUp 2026", "details": "The final view showed the stairwell and surrounding rooms from above."}, {"start_s": 8970.898, "end_s": 8981.191, "action": "Orbited and zoomed around the SketchUp architectural model, moving from an upper stair and room view to another side of the building.", "intent": "Inspect the 3D building layout and stair geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 8981.191, "end_s": 8991.29, "action": "Zoomed out to view two building sections, then navigated back toward the stair assembly and clicked or dragged around the stair components; briefly typed into the model.", "intent": "Inspect and possibly select stair or wall geometry within the model.", "app": "SketchUp 2026", "details": "The view changed from an overview of two building sections to a close-up of the stairs."}, {"start_s": 8991.29, "end_s": 9001.452, "action": "Adjusted the camera around the stair enclosure, clicked and dragged on model geometry, and typed brief characters while continuing the inspection.", "intent": "Refine the view and interact with the stair and surrounding wall geometry.", "app": "SketchUp 2026", "details": "The final view shows the stair opening and adjacent walls from above."}, {"start_s": 9001.452, "end_s": 9011.739, "action": "Orbited and zoomed around the staircase, selected a stair element, and entered a 0.2\" value followed by Enter.", "intent": "Modify or dimension a selected stair component.", "app": "SketchUp 2026", "details": "A stair tread or adjacent rectangular element became highlighted before the numeric entry."}, {"start_s": 9011.739, "end_s": 9022.399, "action": "Navigated around the stairwell with repeated zooming and panning, clicked and dragged on the model, and continued inspecting the stair geometry from several angles.", "intent": "Review the result of the stair adjustment and inspect the surrounding enclosure.", "app": "SketchUp 2026", "details": "The view alternated between a wider stairwell perspective and close views of the stair opening."}, {"start_s": 9022.399, "end_s": 9032.844, "action": "Orbited and zoomed around the building interior and stairwell, shifting from a wider wall view to a close-up of the stair treads.", "intent": "Continue inspecting the stair geometry and adjacent walls from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 9032.844, "end_s": 9043.133, "action": "Scrolled repeatedly and used middle-click navigation to orbit and zoom the SketchUp model, changing from a close stair-and-room view to a wider view of the house layouts.", "intent": "Review the 3D architectural model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 9043.133, "end_s": 9062.021, "action": "Continued orbiting and zooming the SketchUp scene, alternating between close and wide views of the two building layouts, then switched to Windows Explorer.", "intent": "Inspect the model arrangement and then change applications.", "app": "SketchUp 2026", "details": "The interval ended with an application switch to Windows Explorer."}, {"start_s": 9062.021, "end_s": 9080.589, "action": "Returned to SketchUp and continued navigating the scene with scroll and middle-click orbit actions, ending on a more distant overview of both building layouts.", "intent": "Compare the two architectural model sections in the 3D view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9080.589, "end_s": 9093.258, "action": "Scrolled through the SketchUp model to move between wide and closer views of the left building, stairs, rooms, and the adjacent building; then initiated a window control action that resized or moved the SketchUp window.", "intent": "Review the model from multiple scales and adjust the application window.", "app": "SketchUp 2026", "details": null}, {"start_s": 9093.258, "end_s": 9110.71, "action": "Displayed the recorder window on the desktop and left it visible while making a few clicks and scroll actions; then switched back toward SketchUp.", "intent": "Monitor the active recording session before returning to the modeling application.", "app": "Screen recorder", "details": "The recorder panel showed the active run \u201cg+3 modern luxury elevation\u201d with Finish and Deliver, Pause, and Cancel run controls."}, {"start_s": 9110.71, "end_s": 9119.471, "action": "Unhid SketchUp and waited while the Untitled SketchUp 2026 window loaded; a small recorder preview remained visible near the bottom of the screen.", "intent": "Return to SketchUp and resume access to the modeling workspace.", "app": "SketchUp 2026", "details": "The SketchUp canvas was blank with a loading indicator during the captured interval."}, {"start_s": 9119.471, "end_s": 9129.313, "action": "Switched to the SketchUp model titled \u201celevation 111,\u201d then zoomed and navigated from a blank view to an exterior perspective of the house fa\u00e7ade, balcony, stairs, and gate.", "intent": "Inspect the architectural model from an exterior view.", "app": "SketchUp", "details": null}, {"start_s": 9129.313, "end_s": 9140.339, "action": "Zoomed and orbited through the model from the exterior toward an overhead interior view, revealing rooms, walls, doors, windows, and stairs.", "intent": "Review the building layout and interior arrangement.", "app": "SketchUp", "details": null}, {"start_s": 9140.339, "end_s": 9150.768, "action": "Continued orbiting and zooming around the upper interior floor, briefly selecting or clicking within the model, and ended on a close view of interior walls and a window.", "intent": "Examine interior geometry and architectural details.", "app": "SketchUp", "details": null}, {"start_s": 9150.768, "end_s": 9160.976, "action": "Zoomed out and orbited to compare multiple building sections in the SketchUp scene, then switched toward another SketchUp window via the taskbar.", "intent": "Review the overall model arrangement and change documents.", "app": "SketchUp", "details": "A taskbar preview showed the \u201cg+3*\u201d and \u201celevation 111\u201d SketchUp windows before the app switch."}, {"start_s": 9160.976, "end_s": 9170.115, "action": "Switched from \u201celevation 111\u201d to the SketchUp document \u201cg+3*,\u201d then zoomed and orbited around two building models, changing from an overview to a higher angled view.", "intent": "Inspect the alternate building model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 9170.115, "end_s": 9184.71, "action": "Continued navigating and zooming the \u201cg+3*\u201d model, moving from a wide site view toward isolated components and ending on a close-up of a two-panel rectangular element.", "intent": "Inspect model components and architectural details.", "app": "SketchUp", "details": null}, {"start_s": 9184.71, "end_s": 9195.289, "action": "Selected and manipulated the window-frame model, scrolling and dragging to reposition the view and objects while entering brief text input.", "intent": "Adjust the model view and selection for continued editing.", "app": "SketchUp 2026", "details": "A two-panel framed model remained selected in blue."}, {"start_s": 9195.289, "end_s": 9205.008, "action": "Activated the Tape Measure tool, placed a measurement point on the framed geometry, and entered 2 to set or record a distance while zooming and scrolling.", "intent": "Measure or set a precise distance on the model.", "app": "SketchUp 2026", "details": "The Tape Measure status bar and distance field were visible."}, {"start_s": 9205.008, "end_s": 9215.572, "action": "Selected and moved the framed assembly, orbiting and scrolling around it, then clicked additional geometry and entered brief input while repositioning the model.", "intent": "Reposition and inspect the selected frame assembly.", "app": "SketchUp 2026", "details": "The selected two-panel frame was shown from changing angles and at close range."}, {"start_s": 9215.572, "end_s": 9225.824, "action": "Scrolled extensively to inspect the model, entered brief text input, dragged a selected component, and adjusted the camera to show multiple framed openings.", "intent": "Inspect and refine the placement of model components.", "app": "SketchUp 2026", "details": "The view changed from a close-up selected frame to a wider wall view with two openings."}, {"start_s": 9225.824, "end_s": 9235.636, "action": "Inspected the selected frame with repeated orbit and zoom operations, clicked its geometry, and activated the Scale tool to begin scaling a central component.", "intent": "Prepare to resize the frame geometry.", "app": "SketchUp 2026", "details": "The Scale tool was active with a blue scale field visible."}, {"start_s": 9235.636, "end_s": 9245.557, "action": "Orbited and zoomed around the frame, selected its upper geometry, then used the Scale tool and scrolled until the view changed to isolated green-highlighted points.", "intent": "Scale or modify selected model geometry.", "app": "SketchUp 2026", "details": "The final view showed sparse bright-green highlighted elements on a light-blue background."}, {"start_s": 9245.557, "end_s": 9255.806, "action": "Orbited and zoomed around the SketchUp window model, clicking different areas to inspect the frame from exterior and angled views.", "intent": "Inspect the modeled window assembly from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 9255.806, "end_s": 9266.211, "action": "Selected the window/frame geometry, activated the Scale tool with the S shortcut, and adjusted the selected assembly, reducing the displayed scale from about 0.79 to 0.61.", "intent": "Resize the selected window geometry.", "app": "SketchUp 2026", "details": "The frame remained highlighted with scale grips visible."}, {"start_s": 9266.211, "end_s": 9278.455, "action": "Navigated and zoomed into the selected window corner, then switched to Move and dragged the preselected geometry along the model.", "intent": "Reposition the selected window components.", "app": "SketchUp 2026", "details": "The status bar showed Move mode and a measured distance of about 1 1/4 inches."}, {"start_s": 9278.455, "end_s": 9288.084, "action": "Zoomed and orbited back to a wider front view of the window, then activated the Tape Measure tool and created or adjusted a guide along the lower frame edge.", "intent": "Inspect the window placement and establish a reference guide.", "app": "SketchUp 2026", "details": "The final view showed the lower frame in close-up with a guide and a length of approximately 3/4 inch."}, {"start_s": 9288.084, "end_s": 9297.014, "action": "Navigated around the model with repeated zooming and orbiting, then selected the window assembly and moved the view to a centered front elevation.", "intent": "Review the window assembly in context.", "app": "SketchUp 2026", "details": "The centered view showed the two-panel window highlighted in blue."}, {"start_s": 9297.014, "end_s": 9307.042, "action": "Zoomed toward the selected window, clicked the lower-left frame area, and entered Move/copy placement mode while adjusting the selected geometry.", "intent": "Continue repositioning or copying the selected window geometry.", "app": "SketchUp 2026", "details": "The status bar indicated that the items were being copied or placed, with a displayed distance near 7/8 inch before the final close-up."}, {"start_s": 9307.042, "end_s": 9317.679, "action": "Scrolled and adjusted the SketchUp view around a selected two-panel window assembly, then activated the Scale tool and selected the assembly\u2019s scale grips.", "intent": "Prepare the window assembly for dimensional scaling.", "app": "SketchUp 2026", "details": "The window assembly remained highlighted with green scale grips."}, {"start_s": 9317.679, "end_s": 9328.716, "action": "Scrolled and repositioned the view while keeping the window assembly selected, then adjusted a scale grip; the status bar showed a blue scale value of 0.99.", "intent": "Fine-tune the selected window assembly\u2019s scale.", "app": "SketchUp 2026", "details": "The selected assembly was shown close-up with scale grips."}, {"start_s": 9328.716, "end_s": 9334.007, "action": "Dragged in the model view to change the camera, moving from the close-up selected assembly to a wider interior view showing two window openings and surrounding walls.", "intent": "Review the window placement in the surrounding model.", "app": "SketchUp 2026", "details": "The selection highlight was no longer visible in the wider view."}, {"start_s": 9334.007, "end_s": 9345.246, "action": "Scrolled to zoom in on the right-hand two-panel window opening and centered it between the surrounding walls.", "intent": "Inspect the window opening more closely.", "app": "SketchUp 2026", "details": "The window was displayed frontally at a larger scale."}, {"start_s": 9345.246, "end_s": 9365.246, "action": "Paused with the SketchUp view held on the centered two-panel window.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": "No interaction events were recorded during this interval."}, {"start_s": 9365.246, "end_s": 9380.36, "action": "Scrolled slightly to adjust the view around the two-panel window and surrounding wall geometry.", "intent": "Refine the inspection view of the window.", "app": "SketchUp 2026", "details": "The window remained centered while the camera framing shifted."}, {"start_s": 9380.36, "end_s": 9400.36, "action": "Remained in SketchUp while the desktop configuration and connectivity state changed.", "intent": "Maintain the current modeling session.", "app": "SketchUp 2026", "details": "The architectural interior view remained visible."}, {"start_s": 9400.36, "end_s": 9414.114, "action": "Resumed from idle and scrolled repeatedly, shifting the 3D view to show more of the room and adjacent window.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2026", "details": "The view changed from a close-up of one window to a wider view containing two windows."}, {"start_s": 9414.114, "end_s": 9434.114, "action": "Clicked and briefly dragged in the SketchUp viewport, repositioning the camera to a wider frontal view of the two-window wall.", "intent": "Inspect the modeled interior from a different angle.", "app": "SketchUp 2026", "details": "The resulting view showed two windows, a central wall, and the right-side doorway."}, {"start_s": 9434.114, "end_s": 9454.114, "action": "Remained idle in the SketchUp viewport while reviewing the unchanged architectural view.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9454.114, "end_s": 9474.114, "action": "Continued waiting without recorded interaction in SketchUp.", "intent": "Maintain the current view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9474.114, "end_s": 9494.114, "action": "Continued waiting with the same SketchUp model view displayed.", "intent": "Review the unchanged model state.", "app": "SketchUp 2026", "details": null}, {"start_s": 9494.114, "end_s": 9514.114, "action": "Remained idle in SketchUp while the displayed architectural model stayed unchanged; system configuration and connection state resumed or changed in the background.", "intent": "Continue viewing the SketchUp model.", "app": "SketchUp 2026", "details": "The model shows several interior rooms with windows and door openings."}, {"start_s": 9514.114, "end_s": 9534.114, "action": "Remained idle while viewing the same SketchUp architectural model.", "intent": "Review the model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9534.114, "end_s": 9554.114, "action": "Continued reviewing the unchanged SketchUp model without recorded interaction.", "intent": "Inspect the architectural layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 9554.114, "end_s": 9574.114, "action": "Remained idle in SketchUp and continued viewing the unchanged room layout.", "intent": "Continue model inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 9574.114, "end_s": 9587.04, "action": "Scrolled repeatedly in the SketchUp viewport to zoom out, revealing more of the building\u2019s rooms and walls.", "intent": "Expand the visible model view for inspection.", "app": "SketchUp 2026", "details": "The view changed from a close-up of two rooms to a wider top-down perspective."}, {"start_s": 9587.04, "end_s": 9598.124, "action": "Continued scrolling and used middle-button viewport interactions to orbit and adjust the SketchUp camera, briefly activating orbit mode and leaving a wider elevated view of multiple rooms.", "intent": "Inspect the building layout from broader angles.", "app": "SketchUp 2026", "details": "The final view shows several rooms, interior partitions, windows, and door openings from an elevated perspective."}, {"start_s": 9598.124, "end_s": 9607.853, "action": "Clicked and dragged within the SketchUp model, adjusted the view with several scroll inputs, and made additional middle-button clicks around the building.", "intent": "Navigate and inspect the 3D building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9607.853, "end_s": 9627.853, "action": "Scrolled through the model view, then dragged near the right side to adjust the camera, leaving the building shown from a slightly repositioned angle.", "intent": "Reposition the 3D view for inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 9627.853, "end_s": 9647.853, "action": "Remained inactive while the SketchUp building model stayed visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9647.853, "end_s": 9667.853, "action": "Remained inactive with the same SketchUp model view displayed.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9667.853, "end_s": 9687.853, "action": "Remained inactive while the 3D building model remained on screen.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9687.853, "end_s": 9707.853, "action": "Remained inactive with the SketchUp building view unchanged.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9707.853, "end_s": 9727.853, "action": "Remained inactive while SketchUp displayed a 3D house interior model.", "intent": "Review the existing model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9727.853, "end_s": 9747.853, "action": "Remained inactive while the same 3D house model remained visible.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9747.853, "end_s": 9757.162, "action": "Clicked twice in the upper-right area of the SketchUp workspace; no visible model change resulted.", "intent": "Attempt an interaction with the model or workspace.", "app": "SketchUp 2026", "details": null}, {"start_s": 9757.162, "end_s": 9777.162, "action": "Remained inactive while SketchUp continued displaying the unchanged house interior model.", "intent": "Review the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9777.162, "end_s": 9797.162, "action": "Remained inactive with the unchanged 3D house model visible in SketchUp.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9797.162, "end_s": 9817.162, "action": "Remained inactive while the unchanged SketchUp house interior model stayed on screen.", "intent": "Continue reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9817.162, "end_s": 9837.162, "action": "Remained idle with the SketchUp architectural model visible.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 9837.162, "end_s": 9857.162, "action": "Remained idle while the SketchUp architectural model stayed displayed.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 9857.162, "end_s": 9877.162, "action": "Continued viewing the unchanged SketchUp architectural model without interaction.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 9877.162, "end_s": 9897.162, "action": "Remained idle in SketchUp as the architectural model stayed visible; system configuration and network-related status changes were recorded.", "intent": "No active application interaction occurred during the system status changes.", "app": "SketchUp 2026", "details": "Recorded screen configuration, Wi-Fi/network, power-source, input-source, and memory-pressure events at 9885.33s."}, {"start_s": 9897.162, "end_s": 9917.162, "action": "Continued viewing the unchanged SketchUp architectural model without interaction.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 9917.162, "end_s": 9937.162, "action": "Remained idle with the SketchUp architectural model displayed.", "intent": "No active interaction occurred.", "app": "SketchUp 2026", "details": null}, {"start_s": 9937.162, "end_s": 9957.162, "action": "Clicked twice in the SketchUp model area; the visible house model remained unchanged.", "intent": "Attempted to interact with the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 9957.162, "end_s": 9977.162, "action": "Remained idle while viewing the house model in SketchUp.", "intent": "Reviewed the current 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9977.162, "end_s": 9997.162, "action": "Remained idle while viewing the house model in SketchUp.", "intent": "Reviewed the current 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 9997.162, "end_s": 10017.162, "action": "Remained idle while viewing the house model in SketchUp.", "intent": "Reviewed the current 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10017.162, "end_s": 10032.821, "action": "Scrolled repeatedly to zoom out and reveal more of the house model and a neighboring model in the workspace.", "intent": "Adjusted the camera view to inspect more of the surrounding 3D scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 10032.821, "end_s": 10041.095, "action": "Clicked and orbited around the house, adjusted the view, then zoomed toward a window and selected it, leaving the window outlined in blue.", "intent": "Inspected and selected a window component in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 10041.095, "end_s": 10051.248, "action": "Scrolled through the SketchUp model, clicked the selected window assembly, and changed to a wider view showing it highlighted in blue within the room.", "intent": "Inspect and position the selected window assembly in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 10051.248, "end_s": 10062.102, "action": "Pressed Space, dragged and clicked around the model, then zoomed and rotated the view; the window assembly changed from selected blue geometry to an outlined object and was shown from a closer angle.", "intent": "Adjust the selected window assembly and inspect its placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 10062.102, "end_s": 10071.701, "action": "Pressed Space, navigated the view, selected the window assembly, and activated Rotate; rotated it to a visible 15-degree angle while keeping the object highlighted.", "intent": "Rotate the window assembly in the model.", "app": "SketchUp 2026", "details": "The Rotate tool displayed an angle of 15.0."}, {"start_s": 10071.701, "end_s": 10081.556, "action": "Zoomed and orbited around the model, then clicked and dragged the selected window assembly; ended on a wider room view with the assembly still highlighted.", "intent": "Review the rotated assembly in the surrounding room geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 10081.556, "end_s": 10091.357, "action": "Clicked and dragged the selected window assembly, activated Rotate, and rotated it further while navigating the model; the rotation angle reached about 50.4 degrees before switching to a wider overview.", "intent": "Continue rotating and repositioning the window assembly.", "app": "SketchUp 2026", "details": "The Rotate tool displayed an angle of 50.4."}, {"start_s": 10091.357, "end_s": 10100.588, "action": "Orbited and zoomed into another room opening, pressed T, and clicked along the opening edge; ended with the Tape Measure tool active and a guide measurement of about 3 inches visible.", "intent": "Inspect the opening and measure or place a guide near its lower edge.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active at the end."}, {"start_s": 10100.588, "end_s": 10110.604, "action": "Entered a distance value and space, then clicked and scrolled around the selected window-like model component while using the move/copy operation.", "intent": "Position or adjust the selected component in the SketchUp model.", "app": "SketchUp 2026", "details": "The component remained selected and the distance field showed approximately 3 7/16 inches."}, {"start_s": 10110.604, "end_s": 10120.766, "action": "Entered another move command and scrolled through the model, clicking near the selected component to continue repositioning it.", "intent": "Continue positioning the selected model component.", "app": "SketchUp 2026", "details": "The selected rectangular component remained highlighted in blue; the distance field later showed approximately 3 13/16 inches."}, {"start_s": 10120.766, "end_s": 10133.927, "action": "Clicked and scrolled around the selected component, initiated another move/copy action, and then zoomed or navigated out to a wider view of the building model.", "intent": "Place or inspect the component within the larger building model.", "app": "SketchUp 2026", "details": "The application became hidden near the end of the span."}, {"start_s": 10133.927, "end_s": 10139.039, "action": "Scrolled and middle-clicked to navigate the camera, changing from a closer view to a wider overhead view of the building layout.", "intent": "Review the overall model from a broader viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 10139.039, "end_s": 10159.039, "action": "Remained idle while viewing the overhead building model.", "intent": "Pause or review the current SketchUp view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10159.039, "end_s": 10166.348, "action": "Scrolled repeatedly to adjust the camera view, moving from the full building overview toward a closer angled view of the rooms and windows.", "intent": "Inspect the model from another camera angle and scale.", "app": "SketchUp 2026", "details": null}, {"start_s": 10166.348, "end_s": 10184.556, "action": "Scrolled through the SketchUp model view, keeping the upper-floor rooms and window openings in view.", "intent": "Inspect the 3D building model from a slightly adjusted view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10184.556, "end_s": 10195.067, "action": "Continued scrolling to reposition the model and reveal more of the upper-floor layout, stairs, walls, and windows.", "intent": "Review the building geometry from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 10195.067, "end_s": 10205.317, "action": "Activated the orbit view with middle-clicks, rotated and zoomed toward an upper-floor window, then clicked near the lower-right workspace area.", "intent": "Navigate from the overall floor plan to inspect a window detail.", "app": "SketchUp 2026", "details": "The view changed from the room layout to a close-up of a window."}, {"start_s": 10205.317, "end_s": 10217.678, "action": "Typed \u201cm\u201d, navigated around the close-up window with scrolling and middle-clicks, and selected the window geometry; the Move/Copy tool became active with a distance readout.", "intent": "Prepare to move or copy the selected window components.", "app": "SketchUp 2026", "details": "Blue outlines show the window assembly selected, and the status bar indicates a move/copy operation."}, {"start_s": 10217.678, "end_s": 10226.556, "action": "Scrolled while keeping the selected window assembly in close view; the move/copy operation remained active with the distance field visible.", "intent": "Adjust the view while positioning the selected window geometry.", "app": "SketchUp 2026", "details": "The selected window edges remained highlighted blue."}, {"start_s": 10226.556, "end_s": 10235.43, "action": "Scrolled and clicked around the selected window, then changed the view back to the upper-floor rooms while leaving the window assembly selected and the Move tool active.", "intent": "Reposition the view and continue manipulating the selected window.", "app": "SketchUp 2026", "details": "The final view shows two upper-floor windows, with the left window highlighted blue."}, {"start_s": 10235.43, "end_s": 10250.136, "action": "Scrolled within the SketchUp model and entered spaces while the house interior remained in view.", "intent": "Inspect the 3D house model.", "app": "SketchUp 2026", "details": null}, {"start_s": 10250.136, "end_s": 10259.748, "action": "Dragged and orbited the camera, then zoomed out to reveal the house model and a second building model side by side.", "intent": "Adjust the 3D viewpoint to inspect the models.", "app": "SketchUp 2026", "details": null}, {"start_s": 10259.748, "end_s": 10268.144, "action": "Scrolled and orbited around the model, bringing the upper rooms, windows, stairway, and adjacent building into view.", "intent": "Continue reviewing the house layout from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 10268.144, "end_s": 10279.545, "action": "Scrolled and orbited across the upper-level rooms, shifting the camera toward the opposite side of the house.", "intent": "Inspect additional rooms and window placements.", "app": "SketchUp 2026", "details": null}, {"start_s": 10279.545, "end_s": 10290.225, "action": "Orbited and zoomed around the house, showing the stairwell, interior partitions, windows, and exterior walls from progressively different angles.", "intent": "Review the building model and its interior arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 10290.225, "end_s": 10300.113, "action": "Orbited and zoomed toward the house, then clicked a window or frame so its geometry became highlighted in blue.", "intent": "Inspect and select a window component in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 10300.113, "end_s": 10309.988, "action": "Typed briefly, scrolled through the SketchUp model, and clicked or dragged around a selected window component while zooming in toward its lower frame.", "intent": "Inspect or adjust the selected window component.", "app": "SketchUp 2026", "details": "The model showed interior walls and windows; the selected window remained highlighted in blue."}, {"start_s": 10309.988, "end_s": 10320.488, "action": "Scrolled and clicked the selected window, then navigated closer and activated a scale operation, leaving scale grips visible on the model.", "intent": "Scale or modify the selected window component.", "app": "SketchUp 2026", "details": "The status bar indicated moving and then scaling; the final view showed scale grips and a red scale value of 0.99."}, {"start_s": 10320.488, "end_s": 10331.121, "action": "Clicked the selected window and adjusted its scale while orbiting or zooming around it, changing the displayed scale value from approximately 0.63 and leaving the component selected.", "intent": "Refine the window component's size or placement.", "app": "SketchUp 2026", "details": "The window frame remained highlighted blue with green scale grips visible in the close-up views."}, {"start_s": 10331.121, "end_s": 10341.154, "action": "Navigated around the selected window with middle-click orbiting and scrolling, clicked its geometry, entered a space, and then returned to a wider view with the window no longer selected.", "intent": "Inspect the edited window and review the surrounding model.", "app": "SketchUp 2026", "details": "The final view showed two windows in the wall assembly without selection highlighting."}, {"start_s": 10341.154, "end_s": 10350.81, "action": "Selected another window or frame, typed a character, scrolled and zoomed closely over its top and central frame, and adjusted the scale before clicking away.", "intent": "Inspect or resize another window component.", "app": "SketchUp 2026", "details": "The selected geometry was highlighted blue with green scale grips; the final close-up showed the top frame and scale handle."}, {"start_s": 10350.81, "end_s": 10362.576, "action": "Clicked the selected component, navigated outward with scrolling and orbiting, typed a space, and continued reviewing the model from wider views before orbiting toward the wall with windows.", "intent": "Review the edited component in the broader building model.", "app": "SketchUp 2026", "details": "The view expanded to show the building layout, a selected small component with scale grips, and surrounding standalone model elements."}, {"start_s": 10362.576, "end_s": 10373.232, "action": "Orbited and zoomed the SketchUp model around the upper rooms, bringing two windowed walls into a broader view.", "intent": "Inspect the building model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 10373.232, "end_s": 10383.084, "action": "Orbited and zoomed out from the upper rooms to reveal a wider overhead view of the floor plan and adjacent model geometry.", "intent": "Review the overall building layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 10383.084, "end_s": 10392.854, "action": "Continued orbiting and adjusting the view over the upper rooms, then settled on a slightly rotated overhead perspective of the windowed rooms and interior partitions.", "intent": "Examine the room arrangement and openings.", "app": "SketchUp 2026", "details": null}, {"start_s": 10392.854, "end_s": 10403.118, "action": "Opened the Edit menu, moved through selection-related commands including Select All, and clicked within the model area.", "intent": "Access selection commands and interact with the model.", "app": "SketchUp 2026", "details": "The Edit menu was visibly open with Select All highlighted."}, {"start_s": 10403.118, "end_s": 10412.548, "action": "Orbited and zoomed around the house model, shifting from a wider floor-plan view toward the stairwell and adjacent rooms.", "intent": "Inspect the interior layout and staircase from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 10412.548, "end_s": 10422.99, "action": "Navigated toward a window, selected the window component so it highlighted blue, typed a space, and then adjusted the view back toward the upper rooms.", "intent": "Inspect or modify the window component.", "app": "SketchUp 2026", "details": "A window was visibly selected in blue before the final view adjustment."}, {"start_s": 10422.99, "end_s": 10431.916, "action": "Scrolled repeatedly and middle-clicked while navigating a close-up view of the modeled window assembly.", "intent": "Inspect the window geometry from different zoom levels.", "app": "SketchUp 2026", "details": null}, {"start_s": 10431.916, "end_s": 10441.648, "action": "Selected the window assembly, zoomed out, typed briefly, then activated the Move tool and began positioning the selected geometry; the distance field showed approximately 7 9/16 inches.", "intent": "Prepare to move or copy the window assembly within the model.", "app": "SketchUp 2026", "details": "The window assembly remained highlighted in blue."}, {"start_s": 10441.648, "end_s": 10453.091, "action": "Zoomed and navigated around the model, then initiated a move/copy operation on the selected window assembly and repositioned the view to show multiple rooms and windows.", "intent": "Place or evaluate the window assembly in another wall opening.", "app": "SketchUp 2026", "details": "The selected window was visible in blue during the move operation."}, {"start_s": 10453.091, "end_s": 10462.799, "action": "Navigated around the room with middle-clicks and scrolling, then selected the window assembly and activated the Rotate tool, setting a rotation center on the geometry.", "intent": "Adjust the orientation of the window assembly.", "app": "SketchUp 2026", "details": "The rotate protractor and selected lower window assembly were visible."}, {"start_s": 10462.799, "end_s": 10472.718, "action": "Rotated the selected window assembly through the visible rotation handle, reaching an angle of 33.5 degrees, then continued navigating and initiated another rotation or positioning adjustment.", "intent": "Rotate and align the window assembly relative to the surrounding walls.", "app": "SketchUp 2026", "details": "The selected assembly was shown changing orientation with the rotation protractor."}, {"start_s": 10472.718, "end_s": 10482.901, "action": "Scrolled and navigated around the model, selected the window assembly, and began moving or copying it toward another position; the distance field showed approximately 5 7/16 inches before the view zoomed into the selected frame.", "intent": "Position the window assembly precisely in the model.", "app": "SketchUp 2026", "details": "The final view showed the selected blue window frame near another modeled window and wall corner."}, {"start_s": 10482.901, "end_s": 10493.015, "action": "Scrolled and entered guide measurements, typing 1 and confirming it, then switched back to selection while inspecting the detailed window frame.", "intent": "Set or inspect a guide measurement on the window assembly.", "app": "SketchUp 2026", "details": "A close-up of the selected window frame remained visible."}, {"start_s": 10493.015, "end_s": 10502.18, "action": "Selected and manipulated the window assembly, navigated to a wider model view, and opened the Edit menu with Paste highlighted.", "intent": "Position or paste a window component within the building model.", "app": "SketchUp 2026", "details": "The final view showed the building interior and the open Edit menu."}, {"start_s": 10502.18, "end_s": 10512.651, "action": "Clicked the model to remove guide lines, then orbited and scrolled to reframe the building interior and window wall.", "intent": "Clean up construction guides and inspect the window placement.", "app": "SketchUp 2026", "details": "The guide lines were removed and the view ended on a close-up of a wall window."}, {"start_s": 10512.651, "end_s": 10522.441, "action": "Scrolled and clicked the window assembly, then activated the Scale tool and began scaling it, producing a close-up with the selected frame and scale handle.", "intent": "Adjust the size of the window assembly.", "app": "SketchUp 2026", "details": "The scale field showed approximately 1.01 and the selected frame was highlighted."}, {"start_s": 10522.441, "end_s": 10532.203, "action": "Orbited and zoomed around the selected window, then dragged a scale grip to resize the assembly along its edge.", "intent": "Continue resizing and inspecting the window component.", "app": "SketchUp 2026", "details": "The window remained selected with blue and yellow edges during scaling."}, {"start_s": 10532.203, "end_s": 10542.448, "action": "Confirmed the scaling interaction, navigated around the model, and returned to a wider wall view showing the window assembly in place.", "intent": "Finish the window adjustment and review its placement.", "app": "SketchUp 2026", "details": "The final view showed the unselected two-panel window on the wall."}, {"start_s": 10542.448, "end_s": 10552.449, "action": "Orbit and zoom around the selected rectangular cabinet-like model, click within the geometry, type briefly, and leave the object selected in a more distant view.", "intent": "Inspect and reposition the view of the selected model.", "app": "SketchUp 2026", "details": "The model remains highlighted blue; the status bar indicates copy mode near the end of the span."}, {"start_s": 10552.449, "end_s": 10563.904, "action": "Select and manipulate the cabinet-like model, then orbit and zoom to inspect it from different angles while keeping it highlighted.", "intent": "Review the model geometry and adjust the viewport.", "app": "SketchUp 2026", "details": "The selected object is shown close-up with bounding handles in the later view."}, {"start_s": 10563.904, "end_s": 10575.581, "action": "Click the selected model, orbit the camera, activate a guide-related tool, and enter a short numeric value followed by Enter.", "intent": "Inspect the model and set or place a guide/reference using a numeric input.", "app": "SketchUp 2026", "details": "The guide tool is active at the end, with a dashed guide line visible."}, {"start_s": 10575.581, "end_s": 10585.973, "action": "Orbit and zoom around the selected model, click and drag on its geometry, and continue adjusting the view until the cabinet-like object is shown from a closer angled perspective.", "intent": "Refine the inspection view and interact with the model geometry.", "app": "SketchUp 2026", "details": "The object remains selected in blue throughout the visible views."}, {"start_s": 10585.973, "end_s": 10595.487, "action": "Activate the scale tool, select a scale handle, and adjust the selected model's scale while orbiting around it.", "intent": "Resize the selected model and inspect the result.", "app": "SketchUp 2026", "details": "Green scale grips appear first; the later status bar shows a red scale value of 1.20."}, {"start_s": 10595.487, "end_s": 10605.431, "action": "Continue scaling the selected model, then orbit the camera and adjust the scale again to produce a flatter, more front-facing view.", "intent": "Finalize the model's scale and verify its appearance from the front.", "app": "SketchUp 2026", "details": "The status bar shows a blue scale value of 0.77 before the final orbit view."}, {"start_s": 10605.431, "end_s": 10614.552, "action": "Orbit and zoom around the SketchUp house model, then open the File menu and leave it displayed with Save highlighted.", "intent": "Inspect the model and access file commands.", "app": "SketchUp 2026", "details": "The 3D house model remains visible while the File menu is open at the end."}, {"start_s": 10614.552, "end_s": 10625.072, "action": "Orbit and zoom closely toward a wall window, changing from a broader house view to a close-up of the window and adjacent surfaces.", "intent": "Inspect a window component in the 3D model.", "app": "SketchUp 2026", "details": "The view ends focused on a small window in the wall."}, {"start_s": 10625.072, "end_s": 10635.23, "action": "Orbit and zoom around the window, select the window assembly, and activate the Scale tool, leaving the selected component outlined with a scale handle.", "intent": "Adjust or inspect the window component\u2019s size.", "app": "SketchUp 2026", "details": "The selected window is highlighted blue with a yellow bounding outline; the status bar shows the Scale tool and a green scale value."}, {"start_s": 10635.23, "end_s": 10645.532, "action": "Orbit and zoom away from the selected window to review the broader house, then move back toward another wall window and continue inspecting the model.", "intent": "Review the house layout and window placement from multiple views.", "app": "SketchUp 2026", "details": "The evidence shifts from an overhead house view to a close-up of a window."}, {"start_s": 10645.532, "end_s": 10655.698, "action": "Continue orbiting and zooming around the house and window geometry, briefly manipulating the selected window area before returning to a wider exterior view.", "intent": "Inspect the window and surrounding building geometry.", "app": "SketchUp 2026", "details": "The final view shows the full house model with walls, rooms, stairs, and windows."}, {"start_s": 10655.698, "end_s": 10664.564, "action": "Zoom far out to show multiple building models, open the Tools menu briefly, then close it and leave the scene in a wide overview.", "intent": "Review the overall SketchUp scene and available tools.", "app": "SketchUp 2026", "details": "Two building models are visible at the end, and a Windows power-and-battery notification appears."}, {"start_s": 10664.564, "end_s": 10674.436, "action": "Scrolled and adjusted the SketchUp camera view around two visible house models, changing their size and position in the viewport.", "intent": "Review the 3D house models from a different viewing scale.", "app": "SketchUp 2026", "details": "Middle-clicks and repeated zero-delta scroll bursts were recorded; the power source changed during the span."}, {"start_s": 10674.436, "end_s": 10684.568, "action": "Continued scrolling to zoom and reposition the SketchUp camera, bringing the two house models closer and larger in view.", "intent": "Inspect the models from a closer perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 10684.568, "end_s": 10704.568, "action": "Remained idle while viewing the two house models in the SketchUp viewport.", "intent": "Pause to review the current 3D view.", "app": "SketchUp 2026", "details": "No interaction events were recorded."}, {"start_s": 10704.568, "end_s": 10715.725, "action": "Scrolled repeatedly to zoom in and adjust the camera, enlarging the house models and bringing their interior walls and rooms into clearer view.", "intent": "Examine the architectural layout more closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 10715.725, "end_s": 10726.819, "action": "Scrolled and middle-clicked to navigate around the model, moving from a close view of the first house to a wider angled view of both house models.", "intent": "Inspect different portions of the 3D house layouts.", "app": "SketchUp 2026", "details": "The final view shows the first house centered with the second model partly visible at the right."}, {"start_s": 10726.819, "end_s": 10735.862, "action": "Used repeated middle-clicks and scrolling to orbit and zoom around the first house, briefly inspecting its stairwell and rooms before returning to a wider view of both models.", "intent": "Review the first house interior arrangement from multiple camera angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 10735.862, "end_s": 10744.486, "action": "Scrolled repeatedly and middle-clicked around the visible architectural models, adjusting the SketchUp view to inspect the house layouts.", "intent": "Inspect the 3D house models from different views.", "app": "SketchUp 2026", "details": null}, {"start_s": 10744.486, "end_s": 10754.43, "action": "Scrolled extensively and middle-clicked within the model area, zooming out to show both architectural floor-plan models more fully.", "intent": "Compare or inspect the two building models in the workspace.", "app": "SketchUp 2026", "details": null}, {"start_s": 10754.43, "end_s": 10759.924, "action": "Scrolled through the scene, changing the camera view from a wider overview to a closer view of the two house interiors.", "intent": "Examine the building layouts and interior details.", "app": "SketchUp 2026", "details": null}, {"start_s": 10759.924, "end_s": 10769.946, "action": "Scrolled slightly and middle-clicked in the model area while keeping both architectural models visible in the SketchUp viewport.", "intent": "Continue reviewing the model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 10769.946, "end_s": 10775.198, "action": "Middle-clicked and scrolled to zoom farther out, leaving the two house models smaller and fully visible side by side.", "intent": "Obtain an overall view of both models.", "app": "SketchUp 2026", "details": null}, {"start_s": 10775.198, "end_s": 10795.198, "action": "Remained on the SketchUp scene without visible modeling interaction; the two architectural models stayed displayed while system configuration and connectivity status events occurred.", "intent": "Pause while leaving the current model overview open.", "app": "SketchUp 2026", "details": "No visible user interaction during this stable interval."}, {"start_s": 10795.198, "end_s": 10808.908, "action": "Scrolled slightly while viewing the SketchUp architectural model from an elevated perspective.", "intent": "Inspect the model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 10808.908, "end_s": 10819.553, "action": "Scrolled repeatedly to adjust the view, bringing the two building sections closer and larger on screen.", "intent": "Inspect the building model in more detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 10819.553, "end_s": 10839.553, "action": "Paused with the SketchUp model visible for review.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10839.553, "end_s": 10850.935, "action": "Scrolled repeatedly to zoom toward the left building section, then middle-clicked to change the camera view and show the upper rooms and windows more closely.", "intent": "Examine the building interior and camera view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10850.935, "end_s": 10860.859, "action": "Middle-clicked and scrolled through the model to orbit and zoom around the building; clicked and dragged near the model, then typed \"m\". The view ended with a selected narrow brown object beside the building.", "intent": "Navigate the model and begin manipulating or identifying an object.", "app": "SketchUp 2026", "details": "The selected brown object is visible near the building in the final screenshot."}, {"start_s": 10860.859, "end_s": 10870.897, "action": "Scrolled and dragged the selected brown object within the model, then continued orbiting and zooming around the rooms and door area; clicked and typed a space while the object remained selected.", "intent": "Position or inspect the selected model object within the building.", "app": "SketchUp 2026", "details": "The final view shows the brown door-like object standing inside a room."}, {"start_s": 10870.897, "end_s": 10880.024, "action": "Clicked and scrolled through the SketchUp house model, changing from an interior close-up to a distant view of multiple building sections and selecting a door-like object.", "intent": "Inspect the model and reposition the camera around the building.", "app": "SketchUp 2026", "details": null}, {"start_s": 10880.024, "end_s": 10889.497, "action": "Scrolled and clicked the selected door-like object, activated the Rotate tool, and manipulated the view until the wooden door was shown prominently.", "intent": "Rotate or inspect the door component.", "app": "SketchUp 2026", "details": "The Rotate tool was active around the selected door before the view changed to a close-up."}, {"start_s": 10889.497, "end_s": 10898.93, "action": "Zoomed and navigated around the wooden door, selected its geometry, entered a copy/move-style operation, and dragged a selected edge or component while the distance readout appeared.", "intent": "Modify or duplicate part of the door assembly.", "app": "SketchUp 2026", "details": "The selected door geometry remained outlined in blue during the copy operation."}, {"start_s": 10898.93, "end_s": 10908.204, "action": "Scrolled and navigated back through the house interior, keeping the door component selected and continuing the active copy placement toward another doorway area.", "intent": "Position the selected door component within the building model.", "app": "SketchUp 2026", "details": "The copy-placement status and distance readout remained visible while the camera moved across the rooms."}, {"start_s": 10908.204, "end_s": 10917.831, "action": "Scrolled around the interior doorway and adjusted the selected door component, bringing the door and its hardware into a close-up while continuing the placement or move operation.", "intent": "Align the door component with the doorway.", "app": "SketchUp 2026", "details": "The door stayed highlighted in blue and the copy/move distance readout changed as the view was navigated."}, {"start_s": 10917.831, "end_s": 10927.322, "action": "Scrolled to frame the selected wooden door beside the wall, clicked it, and activated the Scale tool; adjusted a scale grip so the displayed scale factor reached approximately 0.83.", "intent": "Resize the door component to fit the doorway.", "app": "SketchUp 2026", "details": "Green scale grips and a yellow bounding outline surrounded the selected door."}, {"start_s": 10927.322, "end_s": 10937.469, "action": "Adjusted the selected wooden door component with the Scale tool, then zoomed and repositioned the camera around its upper edge.", "intent": "Refine the door component\u2019s scale and inspect its placement.", "app": "SketchUp 2026", "details": "The selected door showed scale grips and a Blue Scale value of 0.98."}, {"start_s": 10937.469, "end_s": 10948.819, "action": "Orbited and zoomed around the selected door, then continued manipulating the view until the model moved largely out of frame.", "intent": "Inspect the door and surrounding geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The view changed from a close door inspection to a mostly empty blue modeling area with selection grips visible."}, {"start_s": 10948.819, "end_s": 10960.119, "action": "Exited the close inspection and orbited and zoomed out to reveal the surrounding rooms, windows, walls, and the wooden door in the house model.", "intent": "Review the door\u2019s placement within the broader building model.", "app": "SketchUp 2026", "details": "The final view was a close angled view of the door and adjacent wall."}, {"start_s": 10960.119, "end_s": 10970.591, "action": "Zoomed and orbited closer to the wooden door, moving from its surrounding wall to a detailed view of the door face and handle.", "intent": "Inspect the door geometry and hardware at close range.", "app": "SketchUp 2026", "details": "The door and handle filled most of the viewport by the end of the span."}, {"start_s": 10970.591, "end_s": 10990.591, "action": "Remained inactive while viewing the SketchUp house model from an elevated angle.", "intent": "Pause to review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 10990.591, "end_s": 11000.038, "action": "Orbited and zoomed out to view the overall house layout, then navigated back toward the interior wall and wooden door.", "intent": "Review the model layout and return attention to the door area.", "app": "SketchUp 2026", "details": "The view briefly showed the full floor plan and stairs before ending on a close door view."}, {"start_s": 11000.038, "end_s": 11009.553, "action": "Clicked the SketchUp model and zoomed in repeatedly toward the wooden door and its hardware.", "intent": "Inspect the door detail closely.", "app": "SketchUp", "details": null}, {"start_s": 11009.553, "end_s": 11019.756, "action": "Navigated around the close-up door with repeated zooming and middle-button view adjustments, then selected the door geometry.", "intent": "Examine and select the door component.", "app": "SketchUp", "details": "The door edges became highlighted in blue by the end of the span."}, {"start_s": 11019.756, "end_s": 11029.723, "action": "Adjusted the view around the selected door, clicked near its lower edge, and activated the Scale tool; dragged a scale grip before zooming out to the broader model.", "intent": "Modify or inspect the selected door geometry.", "app": "SketchUp", "details": "The door remained selected with scale grips visible, then the view revealed multiple building models."}, {"start_s": 11029.723, "end_s": 11039.41, "action": "Orbited and zoomed around the building models, returning toward the wooden door and selecting it again for inspection.", "intent": "Reposition the camera and continue examining the door within the model.", "app": "SketchUp", "details": "The view moved from a distant multi-model overview to a close-up of the door and adjacent walls."}, {"start_s": 11039.41, "end_s": 11050.047, "action": "Zoomed into the lower portion of the selected door, clicked near its edges, and adjusted a scale grip while keeping the door highlighted.", "intent": "Refine or inspect the door's scale and placement.", "app": "SketchUp", "details": "Blue selection outlines and green scale handles remained visible around the door."}, {"start_s": 11050.047, "end_s": 11059.951, "action": "Navigated away from the extreme close-up, used the zoom-fit command, and orbited to an elevated interior view showing the door and surrounding rooms.", "intent": "Restore a useful overview of the building after inspecting the door.", "app": "SketchUp", "details": "The final view showed the wooden door centered below two rooms with windows."}, {"start_s": 11059.951, "end_s": 11072.138, "action": "Orbited and zoomed through the SketchUp house model, moving from a wide floor-plan view toward a close view of an interior door and surrounding walls.", "intent": "Inspect the interior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 11072.138, "end_s": 11092.138, "action": "Continued orbiting and zooming around the same interior doorway, adjusting the camera to examine the door, adjacent opening, windows, and surrounding walls.", "intent": "Review the doorway and nearby interior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 11092.138, "end_s": 11101.093, "action": "Zoomed tightly onto the wooden door, then clicked it so the door and its hardware became highlighted for selection.", "intent": "Inspect or select the modeled door assembly.", "app": "SketchUp 2026", "details": "A single 'm' keypress was also entered during the close inspection."}, {"start_s": 11101.093, "end_s": 11111.331, "action": "Manipulated the selected door assembly with the Move tool, dragging it while orbiting and zooming around its lower edge and adjacent wall.", "intent": "Adjust or position the selected door component in the model.", "app": "SketchUp 2026", "details": "The Move tool status bar showed a distance of approximately 3' 10 7/16\" during the drag."}, {"start_s": 11111.331, "end_s": 11121.774, "action": "Orbited and panned away from the selected close-up, moving through low-angle views of multiple wooden doors, the hallway floor, and a nearby stair area.", "intent": "Review the door placement and surrounding hallway from alternate angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 11121.774, "end_s": 11131.581, "action": "Continued orbiting and zooming around the hallway, briefly viewing two adjacent doors up close before pulling back to an elevated overview showing the rooms, doors, hallway, and stairs.", "intent": "Inspect the updated interior layout and door arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 11131.581, "end_s": 11141.803, "action": "Scrolled and orbited around the SketchUp house model, moving from a close interior view of doors and stairs to a wider exterior view of the building.", "intent": "Inspect the modeled house from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 11141.803, "end_s": 11152.965, "action": "Scrolled and orbited farther out to view multiple building sections, then returned to an elevated close view of the interior doors and stair area.", "intent": "Review the overall model layout and reposition the camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 11152.965, "end_s": 11163.201, "action": "Selected a door or door-related component, activated the Move tool, and navigated the view; the selected geometry remained highlighted in blue.", "intent": "Prepare to reposition a door component.", "app": "SketchUp 2026", "details": "A typed 'm' activated Move, and a later spacebar input was recorded while the door geometry was selected."}, {"start_s": 11163.201, "end_s": 11172.707, "action": "Activated Rotate on the selected door, entered 90 and confirmed it, rotating the door component to a perpendicular orientation.", "intent": "Rotate the selected door component by 90 degrees.", "app": "SketchUp 2026", "details": "The Angle field visibly contained 90."}, {"start_s": 11172.707, "end_s": 11182.63, "action": "Navigated closer around the doorway, selected the door, and manipulated its position with Move; the door remained highlighted while the camera shifted to a close-up.", "intent": "Adjust the selected door's placement in the doorway.", "app": "SketchUp 2026", "details": null}, {"start_s": 11182.63, "end_s": 11192.748, "action": "Activated Move on the selected door and dragged it within the doorway area while orbiting and zooming closer; the selected door remained highlighted beside the stairs.", "intent": "Continue positioning the door component in the model.", "app": "SketchUp 2026", "details": "The Move tool showed distance readouts during the manipulation."}, {"start_s": 11192.748, "end_s": 11203.162, "action": "Navigated around the selected wooden door assembly with orbit/zoom gestures, clicked the geometry, and initiated a move operation on the preselected parts.", "intent": "Inspect and manipulate the door assembly in the 3D model.", "app": "SketchUp 2026", "details": "The door and trim remained highlighted in blue; the Move tool status appeared at the end."}, {"start_s": 11203.162, "end_s": 11212.106, "action": "Adjusted the camera around the doorway, selected the door assembly, and activated the Scale tool; resized the selected geometry to approximately 1.00 scale.", "intent": "Adjust the door assembly dimensions or fit within the opening.", "app": "SketchUp 2026", "details": "Green scale grips and yellow selection outlines surrounded the wooden door."}, {"start_s": 11212.106, "end_s": 11222.515, "action": "Exited the scale-focused view and orbited around the doorway, inspecting the wooden door, frame, and hardware from closer angles.", "intent": "Review the door assembly and its placement in the opening.", "app": "SketchUp 2026", "details": "The door became unselected while the camera moved to an oblique close-up."}, {"start_s": 11222.515, "end_s": 11229.698, "action": "Orbited and zoomed out to view the doorway in the surrounding room, then selected the door and began scaling it; the scale value reached about 1.02.", "intent": "Inspect overall placement and make a small dimensional adjustment to the door.", "app": "SketchUp 2026", "details": "The door was highlighted with yellow and blue outlines during scaling."}, {"start_s": 11229.698, "end_s": 11239.77, "action": "Adjusted the view around the selected door, orbited to a wider exterior perspective, and continued manipulating the selected geometry before returning to a broader model view.", "intent": "Check the door assembly and its fit from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the selected wooden door within the surrounding walls and openings."}, {"start_s": 11239.77, "end_s": 11249.572, "action": "Released the active selection and orbited/zoomed around the doorway, moving from a close view of the door hardware to a higher angled inspection of the door and adjacent panel.", "intent": "Review the completed door placement and surrounding geometry.", "app": "SketchUp 2026", "details": "The final view showed the wooden door and adjacent open panel without selection highlighting."}, {"start_s": 11249.572, "end_s": 11259.42, "action": "Navigated around the SketchUp model with repeated middle-button view adjustments and scrolling, then selected and began moving geometry near a wooden door or wall corner.", "intent": "Inspect and reposition model geometry at close range.", "app": "SketchUp 2026", "details": "A close-up wooden surface and corner geometry remained visible; the Move tool showed an active distance readout."}, {"start_s": 11259.42, "end_s": 11269.49, "action": "Adjusted the camera around the modeled doorway and latch, clicked near the lower corner, and continued positioning selected geometry with the Move tool.", "intent": "Refine the placement of doorway components while inspecting their fit.", "app": "SketchUp 2026", "details": "The model showed a wooden door with a latch, followed by a close-up of selected corner edges and a distance readout."}, {"start_s": 11269.49, "end_s": 11279.721, "action": "Navigated from the close-up door area to a wider exterior view, continuing camera adjustments and selection changes around the model.", "intent": "Review the door assembly in the context of the broader building model.", "app": "SketchUp 2026", "details": "The view expanded from a detailed wooden doorway to the overall building, with the door and a standing figure visible in the scene."}, {"start_s": 11279.721, "end_s": 11290.72, "action": "Orbited and zoomed through the building model, moving from the exterior overview into an overhead interior layout and then back toward a selected doorway or wall edge.", "intent": "Inspect interior layout and doorway placement from multiple viewpoints.", "app": "SketchUp 2026", "details": "The model transitioned from an exterior building overview to floor-plan-like interior views and a close-up with blue-selected edges."}, {"start_s": 11290.72, "end_s": 11300.603, "action": "Scrolled and orbited through the interior, selected a door, and began copying or moving it within the hallway area.", "intent": "Position a door component in the interior model.", "app": "SketchUp 2026", "details": "A blue-highlighted door appeared in a hallway; the status bar indicated an active copy operation and a distance measurement."}, {"start_s": 11300.603, "end_s": 11310.228, "action": "Continued orbiting around the interior stair and hallway, then selected and repositioned a door assembly near the wall opening.", "intent": "Finalize or inspect the door placement relative to the surrounding interior walls.", "app": "SketchUp 2026", "details": "The final view showed a large blue-selected door near the stairs and hallway, with the Move/Copy operation still active."}, {"start_s": 11310.228, "end_s": 11320.722, "action": "Orbit the SketchUp camera around the selected door-like object, changing from an overhead room view to a more frontal view.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": "The selected object remains visible with rotation controls."}, {"start_s": 11320.722, "end_s": 11329.422, "action": "Zoom and reposition the view around the selected wooden door, then begin moving or copying the selected geometry; enter movement input while the object remains highlighted.", "intent": "Position or copy the door component within the model.", "app": "SketchUp 2026", "details": "The Move tool status and a distance value of approximately 2 1/4 inches are visible."}, {"start_s": 11329.422, "end_s": 11339.429, "action": "Continue zooming and navigating through the building model, moving the selected door component toward a wall opening and adjusting the view to inspect its placement.", "intent": "Place or align the door component in the wall opening.", "app": "SketchUp 2026", "details": "The selected wooden door appears near a wall opening with the Move tool active."}, {"start_s": 11339.429, "end_s": 11349.022, "action": "Zoom out to inspect the door in the room, select it for scaling, and adjust the scale while orbiting to a close-up view.", "intent": "Resize the door component to fit the opening.", "app": "SketchUp 2026", "details": "Scale grips surround the selected door, and the view shows scale interaction."}, {"start_s": 11349.022, "end_s": 11358.834, "action": "Continue scaling the selected door from close-up views, changing the visible scale values and repositioning the camera around its top edge.", "intent": "Refine the door dimensions and fit.", "app": "SketchUp 2026", "details": "The Scale tool remains active with visible values including 1.53 and Blue Scale 0.92."}, {"start_s": 11358.834, "end_s": 11369.447, "action": "Navigate to a low, close-up view of the door and select its lower geometry, then continue scaling or adjusting the selected component along the bottom edge.", "intent": "Fine-tune the door placement or dimensions at the base.", "app": "SketchUp 2026", "details": "The final view shows the selected wooden component with scale grips near its lower edge."}, {"start_s": 11369.447, "end_s": 11378.914, "action": "Orbited and zoomed around the SketchUp architectural model, moving from an underside view to a blank canvas view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": "The model was visible at first and then moved out of view by the end of the span."}, {"start_s": 11378.914, "end_s": 11388.706, "action": "Changed the camera view and zoomed out to reveal separated building sections, then continued navigating around the floor-plan model.", "intent": "Survey the overall arrangement of the modeled building sections.", "app": "SketchUp 2026", "details": "The view progressed from an underside perspective to a wide view of two building sections."}, {"start_s": 11388.706, "end_s": 11399.511, "action": "Orbited and zoomed toward the building interiors, bringing interior walls and staircases into close view.", "intent": "Inspect interior geometry and circulation areas.", "app": "SketchUp 2026", "details": "The camera ended on a close-up of staircases and adjoining walls."}, {"start_s": 11399.511, "end_s": 11409.562, "action": "Continued orbiting and zooming around the interior, shifting from a wider view of rooms and stairs to a close view of stair treads and nearby doors.", "intent": "Examine the stairwell and adjacent interior elements.", "app": "SketchUp 2026", "details": "No geometry edits were visibly made; navigation changed the viewpoint."}, {"start_s": 11409.562, "end_s": 11419.405, "action": "Orbited and zoomed back to a broader perspective showing exterior walls, windows, doors, and the stairwell, then moved toward the stair opening again.", "intent": "Review the relationship between exterior and interior building elements.", "app": "SketchUp 2026", "details": "The model remained in inspection/navigation mode."}, {"start_s": 11419.405, "end_s": 11426.492, "action": "Zoomed out and orbited to an elevated overview of the building section, revealing the full room layout and another model section in the background.", "intent": "Obtain an overall view of the architectural model arrangement.", "app": "SketchUp 2026", "details": "The final view showed the main building section from above with a separate section to the right."}, {"start_s": 11426.492, "end_s": 11444.341, "action": "Orbited around the SketchUp house models and adjusted the 3D view with middle-mouse navigation, ending on a wide view of two floor-plan structures.", "intent": "Inspect the overall 3D house layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 11444.341, "end_s": 11454.87, "action": "Zoomed and orbited inward toward the nearer house, moving from an overall view to a close inspection of the staircases, walls, and doors.", "intent": "Examine the stair and interior construction details.", "app": "SketchUp 2026", "details": null}, {"start_s": 11454.87, "end_s": 11464.823, "action": "Continued orbiting and zooming around the staircase, shifting between close and elevated views of the steps, surrounding walls, and adjacent rooms.", "intent": "Review the staircase geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 11464.823, "end_s": 11474.57, "action": "Zoomed out and repositioned the camera to reveal more of the house, including the staircase, rooms, doors, windows, and surrounding floor outline.", "intent": "Broaden the inspection to the surrounding floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 11474.57, "end_s": 11486.656, "action": "Zoomed farther out and orbited to show most of the nearer house together with part of the second model above it, preserving the overall floor-plan context.", "intent": "Compare the model placement and overall layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 11486.656, "end_s": 11498.693, "action": "Orbited and zoomed into another furnished section of the model, revealing rooms with tables, seating, a bathroom fixture, stairs, and surrounding walls.", "intent": "Inspect interior room layout and furnishings.", "app": "SketchUp 2026", "details": null}, {"start_s": 11498.693, "end_s": 11506.238, "action": "Scrolled without changing the SketchUp view; kept the 3D house interior centered.", "intent": "Continue inspecting the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 11506.238, "end_s": 11516.462, "action": "Scrolled repeatedly to zoom out to a wider view of the multi-room house, then zoomed back in toward the central rooms and stairs.", "intent": "Adjust the camera view for model inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 11516.462, "end_s": 11523.778, "action": "Used middle-click orbit interactions and brief scrolling to rotate the camera around the house interior, ending on a closer view of the living area and stairwell.", "intent": "Inspect the interior layout from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 11523.778, "end_s": 11539.518, "action": "Scrolled to adjust the camera while reviewing the stairwell, adjacent rooms, and surrounding walls from an elevated interior angle.", "intent": "Continue examining the model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 11539.518, "end_s": 11550.006, "action": "Scrolled repeatedly to reposition and zoom the camera from the central stair area toward a closer view of the staircase and adjoining walls.", "intent": "Inspect the staircase and nearby structure.", "app": "SketchUp 2026", "details": null}, {"start_s": 11550.006, "end_s": 11561.189, "action": "Scrolled to zoom out and reveal the staircase, upper rooms, windows, doors, and exterior outline; used middle-click interactions while maintaining the elevated overview.", "intent": "Review the broader building layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 11561.189, "end_s": 11572.644, "action": "Navigated around the SketchUp house model by clicking and scrolling, moving from an exterior overview toward the stair and interior walls.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": "The view shifted closer to the stair opening and interior partitions."}, {"start_s": 11572.644, "end_s": 11584.106, "action": "Adjusted the camera with middle-clicks and scrolling, first viewing the stair area closely and then zooming back to show the full house and a neighboring model.", "intent": "Review the house layout in relation to the surrounding model.", "app": "SketchUp 2026", "details": "The final view showed the complete small house and another building model in the background."}, {"start_s": 11584.106, "end_s": 11595.544, "action": "Scrolled to refine the 3D view and clicked once, keeping the house model in an elevated overview focused on its rooms, doors, windows, and stairs.", "intent": "Continue inspecting the building layout.", "app": "SketchUp 2026", "details": "No geometry or properties visibly changed."}, {"start_s": 11595.544, "end_s": 11606.395, "action": "Used repeated middle-clicks and scrolling to orbit and zoom through the stairwell and adjacent rooms, ending on a close view beneath the stair structure.", "intent": "Examine the stairwell and nearby interior construction.", "app": "SketchUp 2026", "details": "The camera moved from an upper room view into a tight stair-focused perspective."}, {"start_s": 11606.395, "end_s": 11616.025, "action": "Continued orbiting and zooming around the stairs and interior walls, then pulled back to an elevated overview of the house.", "intent": "Inspect the stair geometry and overall room arrangement.", "app": "SketchUp 2026", "details": "The final frame showed the house from above with the stair opening and multiple rooms visible."}, {"start_s": 11616.025, "end_s": 11636.025, "action": "Scrolled and middle-clicked to zoom far out, revealing the full site area, the small house, a detached door-like object, and a larger neighboring building model.", "intent": "Review the model placement and surrounding scene.", "app": "SketchUp 2026", "details": "The camera ended at a distant overview of both building models."}, {"start_s": 11636.025, "end_s": 11652.318, "action": "Resumed in SketchUp and scrolled without changing the visible architectural model.", "intent": "Inspect the 3D model.", "app": "SketchUp 2026", "details": "Viewed multiple building layouts in the modeling workspace."}, {"start_s": 11652.318, "end_s": 11662.419, "action": "Orbited and zoomed through the building model using middle-button navigation, moving from an overview to a closer view of rooms, doors, and stairs.", "intent": "Examine the building interior layout.", "app": "SketchUp 2026", "details": "The camera changed substantially while the model geometry remained unchanged."}, {"start_s": 11662.419, "end_s": 11669.016, "action": "Continued orbiting and zooming around the model, inspecting the upper rooms, doors, windows, and stairwell from several angles.", "intent": "Review architectural details and spatial arrangement.", "app": "SketchUp 2026", "details": "Ended on a close elevated view of the rooms and stair area."}, {"start_s": 11669.016, "end_s": 11679.292, "action": "Typed a character and clicked in the model area, leaving the guide tool active near the stairwell.", "intent": "Begin placing or manipulating a guide in the model.", "app": "SketchUp 2026", "details": "The status bar indicated guide creation and showed an area readout."}, {"start_s": 11679.292, "end_s": 11689.592, "action": "Typed additional characters and continued orbiting and zooming around the stairwell and adjacent rooms.", "intent": "Navigate and inspect the stairwell area while working with the active tool.", "app": "SketchUp 2026", "details": "The camera shifted between close views of the stair opening and surrounding walls."}, {"start_s": 11689.592, "end_s": 11699.389, "action": "Dragged and clicked in the model, entered additional characters, and repositioned the view; ended with a horizontal face or edge selected across the stairwell opening.", "intent": "Create or adjust geometry or a guide around the stairwell.", "app": "SketchUp 2026", "details": "The final view showed a purple-highlighted horizontal strip spanning the opening."}, {"start_s": 11699.389, "end_s": 11709.172, "action": "Entered 1' in the distance field and confirmed it, then orbited and zoomed out to inspect the surrounding rooms, walls, and staircase model.", "intent": "Set a one-foot modeling distance and review the resulting building layout.", "app": "SketchUp 2026", "details": "The model view changed from a close-up wall opening to a wider interior view."}, {"start_s": 11709.172, "end_s": 11717.948, "action": "Orbited and zoomed around the building interior, reviewing the stairwell, partitions, doors, and adjacent rooms from several angles.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 11717.948, "end_s": 11730.555, "action": "Zoomed far out and repositioned the camera to view two separate building layouts and their surrounding base outlines.", "intent": "Compare the overall model layouts in the scene.", "app": "SketchUp 2026", "details": "The final view showed two building groups at a distance."}, {"start_s": 11730.555, "end_s": 11742.609, "action": "Continued orbiting and zooming around the scene, moving from an overall view of both structures to a close inspection of a wall, window, and stair area.", "intent": "Examine model components at both site and detail scales.", "app": "SketchUp 2026", "details": null}, {"start_s": 11742.609, "end_s": 11753.326, "action": "Zoomed and orbited back to an elevated overall view of the two building layouts, keeping the room arrangements and base outlines visible.", "intent": "Review the overall arrangement before switching applications.", "app": "SketchUp 2026", "details": "The SketchUp view remained focused on the two building models."}, {"start_s": 11753.326, "end_s": 11762.101, "action": "Switched through Windows Explorer to the recorder application, then clicked and scrolled within the SketchUp model to inspect a furnished interior with colored flooring and fixtures.", "intent": "Open the recorder application and continue reviewing the architectural model.", "app": "SketchUp 2026 / Screen recorder", "details": "The active SketchUp document changed to \u201celevation 111\u201d; the final view showed furnished rooms, windows, a door, and stairs."}, {"start_s": 11762.101, "end_s": 11770.75, "action": "Switched to SketchUp and orbited/zoomed around the architectural models, moving from an overview toward the smaller house interior.", "intent": "Inspect the 3D house models from closer viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 11770.75, "end_s": 11781.382, "action": "Zoomed and navigated deeper into the smaller house model, bringing its rooms, doors, and windows into close view.", "intent": "Examine the interior layout and window details.", "app": "SketchUp", "details": null}, {"start_s": 11781.382, "end_s": 11788.17, "action": "Adjusted the view around a double window, then clicked it so its frame and components became highlighted in blue.", "intent": "Select and inspect the window assembly.", "app": "SketchUp", "details": "The double window was visibly selected at the end of the span."}, {"start_s": 11788.17, "end_s": 11804.138, "action": "Continued orbiting and zooming around the selected window, then changed the view to show the surrounding rooms and adjacent windows.", "intent": "Review the selected window in relation to the surrounding model.", "app": "SketchUp", "details": "The window remained highlighted during the close inspection."}, {"start_s": 11804.138, "end_s": 11814.705, "action": "Typed \u201cm\u201d and activated the Move tool on the selected window, then clicked to begin positioning a copy and dragged it to a new location.", "intent": "Copy or move the selected window component within the model.", "app": "SketchUp", "details": "The status bar indicated copying/placing items, with a distance of approximately 5 3/8 inches shown."}, {"start_s": 11814.705, "end_s": 11827.346, "action": "Scrolled and zoomed out while continuing the active copy placement, dragging the selected window away from the original house toward the other model.", "intent": "Position the copied window component in the broader scene.", "app": "SketchUp", "details": "The copy operation remained active, with a large placement distance shown near the end."}, {"start_s": 11827.346, "end_s": 11837.408, "action": "Navigated around the selected window frame with repeated scrolling and clicks, then activated the guide tool and positioned a guide near the lower frame edge.", "intent": "Position a guide or reference for the window-frame geometry.", "app": "SketchUp 2026", "details": "The model remained zoomed closely on a window assembly; the guide tool showed an approximately 1/2-inch measurement."}, {"start_s": 11837.408, "end_s": 11846.885, "action": "Entered a 1-inch value and confirmed it, then navigated the model and switched into scaling the selected window-frame geometry.", "intent": "Set a guide/reference distance and begin adjusting the window assembly.", "app": "SketchUp 2026", "details": "The view changed to show the full window and adjacent doorway; the Scale tool displayed a red scale value of 0.88."}, {"start_s": 11846.885, "end_s": 11856.945, "action": "Zoomed and panned around the window, selected its geometry, and adjusted the scale interaction until the displayed scale reached 1.00.", "intent": "Resize or inspect the window-frame assembly.", "app": "SketchUp 2026", "details": "The window remained highlighted in blue/yellow while the Scale tool was active."}, {"start_s": 11856.945, "end_s": 11866.647, "action": "Navigated around the upper window area, made selection clicks, and activated scaling on the window assembly; the final view showed scale grips around the selected frame.", "intent": "Prepare or refine the window assembly\u2019s scale adjustment.", "app": "SketchUp 2026", "details": "The selected window-frame geometry was visible with green scale handles and a blue outline."}, {"start_s": 11866.647, "end_s": 11877.046, "action": "Zoomed and panned around the selected window, keeping the scale handles active while inspecting the frame from different views.", "intent": "Review the selected window assembly before further editing.", "app": "SketchUp 2026", "details": "The window remained selected with green scale grips; no completed scale change was visibly confirmed."}, {"start_s": 11877.046, "end_s": 11890.228, "action": "Clicked the window assembly, typed a move-related shortcut, then navigated extensively and began moving geometry from a corner; the view ended on the corner with a distance readout of approximately 14 feet 1 5/8 inches.", "intent": "Move or reposition the selected window-related geometry in the model.", "app": "SketchUp 2026", "details": "The final screen showed Move/Copy guidance at a corner and a large distance value."}, {"start_s": 11890.228, "end_s": 11900.328, "action": "Scrolled through the SketchUp model, clicked near the lower viewport, and continued scrolling to change the view from a close-up of the window assembly to a wider room view.", "intent": "Inspect the modeled room and window from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 11900.328, "end_s": 11910.707, "action": "Dragged within the viewport and used middle-button navigation and scrolling to orbit and reposition the camera around the room, bringing the window and adjacent doorway into a clearer view.", "intent": "Adjust the 3D viewpoint to inspect the room layout and window placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 11910.707, "end_s": 11916.97, "action": "Scrolled repeatedly to zoom and reposition the camera, moving from the room-wide view toward a closer view of the window, doorway, and surrounding walls.", "intent": "Examine the window and nearby architectural elements more closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 11916.97, "end_s": 11930.882, "action": "Scrolled extensively to zoom tightly onto the window, then clicked and dragged near its upper-right area before zooming back out to a broader building view.", "intent": "Inspect the window assembly and then review its context within the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 11930.882, "end_s": 11941.39, "action": "Scrolled around the model, clicked the window assembly, typed \u201cs,\u201d and used a scale-style interaction with the selected window before orbiting upward to view its upper edge.", "intent": "Select and begin adjusting the window assembly while inspecting its geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 11941.39, "end_s": 11951.616, "action": "Orbited and scrolled through the model, clicked and dragged around the selected geometry, then navigated out to a distant view of multiple building sections before returning to the room with the window visible.", "intent": "Review the selected window and compare its placement within the broader model.", "app": "SketchUp 2026", "details": null}, {"start_s": 11951.616, "end_s": 11961.852, "action": "Scrolled and orbited around the SketchUp house model, then clicked to adjust the 3D view and select a wall-mounted object.", "intent": "Inspect the architectural model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 11961.852, "end_s": 11972.008, "action": "Typed \u201cm,\u201d navigated the model with orbit/zoom gestures, and activated the Move tool; selected model geometry and moved the view out to show multiple building groups.", "intent": "Prepare to move or copy selected model geometry while inspecting its placement.", "app": "SketchUp 2026", "details": "The Move tool was active, with selected geometry outlined in blue and a distance readout visible."}, {"start_s": 11972.008, "end_s": 11982.846, "action": "Orbited and zoomed through the model, clicked geometry, and switched to the Orbit tool to inspect rooms and wall fixtures from close and wide views.", "intent": "Review the model layout and inspect interior components.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall fixture to a wider view of the house interiors."}, {"start_s": 11982.846, "end_s": 11993.19, "action": "Orbited and zoomed across the house model, moving from an overall interior view to a close-up of a room containing a wall-mounted fixture and nearby furnishings.", "intent": "Examine the selected area and surrounding interior arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 11993.19, "end_s": 12003.226, "action": "Clicked the wall-mounted fixture to select it, then used the Rotate tool on the selected object and set the rotation angle to 180 degrees.", "intent": "Rotate the selected wall-mounted fixture within the model.", "app": "SketchUp 2026", "details": "The fixture was outlined in blue and the rotation protractor showed an angle of 180.0 degrees."}, {"start_s": 12003.226, "end_s": 12013.523, "action": "Entered numeric rotation values, used backspaces and Enter to confirm the transform, and left the selected fixture in an active rotation state with an angle readout near \u221271.2 degrees.", "intent": "Finalize or adjust the fixture\u2019s rotation angle.", "app": "SketchUp 2026", "details": "The Rotate tool remained active and displayed an \u201cOn Edge in Group\u201d inference."}, {"start_s": 12013.523, "end_s": 12023.483, "action": "Scrolled and orbited around the SketchUp model, selected the louvered window assembly, and zoomed in until its geometry was highlighted in blue.", "intent": "Inspect and select the window assembly for editing.", "app": "SketchUp 2026", "details": "The view changed from a wider room perspective to a close-up of the selected window assembly."}, {"start_s": 12023.483, "end_s": 12035.058, "action": "Adjusted the camera around the selected window assembly, zoomed closer, and activated the Move tool with the assembly still selected.", "intent": "Prepare the selected window assembly for repositioning.", "app": "SketchUp 2026", "details": "The status bar indicated that the pre-selected items could be moved."}, {"start_s": 12035.058, "end_s": 12044.76, "action": "Orbited and zoomed around the model, then moved the view back to a wider room perspective while inspecting the window assembly from different angles.", "intent": "Review the window assembly in the surrounding wall context.", "app": "SketchUp 2026", "details": "The assembly was shown first in a close front view and then smaller within the room model."}, {"start_s": 12044.76, "end_s": 12054.81, "action": "Zoomed back onto the window assembly, selected it, switched to the Tape Measure tool, and placed or adjusted a guide along its lower edge; entered a measurement value and confirmed it.", "intent": "Measure the window assembly and establish a construction guide.", "app": "SketchUp 2026", "details": "The Tape Measure status and a visible guide line appeared along the lower edge."}, {"start_s": 12054.81, "end_s": 12064.986, "action": "Selected the window assembly, activated Move, then selected Scale and adjusted a scale grip, leaving the assembly highlighted with scaling handles.", "intent": "Resize the window assembly.", "app": "SketchUp 2026", "details": "The final view showed the assembly selected with green scale grips and a scale value field."}, {"start_s": 12064.986, "end_s": 12074.05, "action": "Adjusted the scale handles on the selected window assembly, then deselected it and orbited or zoomed out to review the resized assembly in the wall.", "intent": "Finalize the size adjustment and inspect the result in context.", "app": "SketchUp 2026", "details": "The final frame showed the window assembly smaller within the surrounding wall geometry."}, {"start_s": 12074.05, "end_s": 12084.981, "action": "Orbited and zoomed around the SketchUp house model, moving from an interior close-up to a wider view of the rooms and walls.", "intent": "Inspect the 3D building layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 12084.981, "end_s": 12094.128, "action": "Adjusted the model view with middle-click navigation and scrolling, opened the Edit menu, and returned to an angled interior view of the house.", "intent": "Navigate and inspect the model while accessing editing commands.", "app": "SketchUp 2026", "details": "The Edit menu was opened and displayed options including Select All and Hide."}, {"start_s": 12094.128, "end_s": 12100.16, "action": "Orbited and zoomed toward the upper walls and windows, ending on a wider view showing both sides of the interior layout.", "intent": "Examine wall and window details from closer and wider perspectives.", "app": "SketchUp 2026", "details": null}, {"start_s": 12100.16, "end_s": 12109.887, "action": "Continued orbiting and zooming through the house model, moving from a broad upper-floor view to a close-up of a window, doorway, and adjacent room.", "intent": "Inspect architectural elements and room connections.", "app": "SketchUp 2026", "details": null}, {"start_s": 12109.887, "end_s": 12119.691, "action": "Selected the window assembly, typed \u201cm\u201d to activate Move, and positioned the selected window while zooming in; the window remained highlighted and a distance readout appeared.", "intent": "Move or position the selected window component in the model.", "app": "SketchUp 2026", "details": "The selected window was outlined in blue; the Move tool showed a distance of approximately 4 9/16 inches."}, {"start_s": 12119.691, "end_s": 12129.554, "action": "Navigated to a wider view of the building, zoomed and orbited around the selected window, then dragged and clicked near the lower interface and entered a space character.", "intent": "Review the window placement and continue model navigation.", "app": "SketchUp 2026", "details": "The window remained highlighted in blue in the wider building view."}, {"start_s": 12129.554, "end_s": 12139.452, "action": "Navigated around the SketchUp model with repeated scrolls and clicks, then selected the small rectangular object and activated the Rotate tool.", "intent": "Position and prepare the rectangular model element for transformation.", "app": "SketchUp 2026", "details": "The object is selected with a rotation protractor visible; the model view remains angled."}, {"start_s": 12139.452, "end_s": 12148.608, "action": "Rotated the selected rectangular object, entering a 180-degree rotation, then completed the transform and left the object selected.", "intent": "Flip the rectangular model element to the opposite orientation.", "app": "SketchUp 2026", "details": "The selected object appears rotated and remains outlined in blue."}, {"start_s": 12148.608, "end_s": 12158.749, "action": "Zoomed and navigated through the model, moved the selected rectangular object in the scene, and switched to the Tape Measure tool to inspect or establish a measurement.", "intent": "Position the object relative to the building and check dimensions or alignment.", "app": "SketchUp 2026", "details": "The view changes from a wider model view to a close-up interior area; the Tape Measure status shows an area measurement."}, {"start_s": 12158.749, "end_s": 12168.016, "action": "Entered a value of 1 and pressed Enter, navigated and zoomed out, then moved the selected object by a displayed distance of approximately 5 5/16 inches.", "intent": "Apply a numeric adjustment and reposition the model element.", "app": "SketchUp 2026", "details": "The model transitions to a wider building view, and the object is shown selected during the move."}, {"start_s": 12168.016, "end_s": 12178.299, "action": "Continued moving the selected object through the building view while zooming and panning, bringing it toward an opening or frame and adjusting the displayed distance to approximately 15 feet 8 1/8 inches.", "intent": "Place the model element at a specific location within the building model.", "app": "SketchUp 2026", "details": "The object remains selected and the Move tool displays a distance readout."}, {"start_s": 12178.299, "end_s": 12188.621, "action": "Selected the framed rectangular opening, zoomed into it, and activated the Scale tool to resize the selected geometry; adjusted the scale to approximately 0.93.", "intent": "Resize the opening or framed model component to fit the surrounding structure.", "app": "SketchUp 2026", "details": "The framed geometry is highlighted with scale grips and the Scale tool status shows a factor of 0.93."}, {"start_s": 12188.621, "end_s": 12199.139, "action": "Scrolled repeatedly through the SketchUp model, clicked near the window assembly, entered a character, and changed the view to a close-up with the assembly selected.", "intent": "Inspect and begin editing the window assembly.", "app": "SketchUp 2026", "details": "The model view shifted from an angled room view to a close-up of the lower window frame."}, {"start_s": 12199.139, "end_s": 12208.296, "action": "Entered another character, navigated with repeated scrolling and middle-clicks, selected the window geometry, and activated the Scale tool; then zoomed back to an exterior view of the building.", "intent": "Scale or adjust the selected window geometry while checking its placement.", "app": "SketchUp 2026", "details": "The Scale tool was active and the selected geometry remained highlighted in blue."}, {"start_s": 12208.296, "end_s": 12218.747, "action": "Navigated around the model, clicked and dragged on the selected lower frame, entered characters, and continued zooming and panning; selected a corner and adjusted the geometry with the Scale tool.", "intent": "Refine the size or alignment of the window frame.", "app": "SketchUp 2026", "details": "The view alternated between an exterior window view and close-ups of the lower-left frame corner with scale grips."}, {"start_s": 12218.747, "end_s": 12229.587, "action": "Clicked the selected frame and used middle-click navigation and scrolling to inspect it from different angles; continued scaling around the lower edge and shifted the close-up across the frame.", "intent": "Fine-tune and inspect the window assembly dimensions.", "app": "SketchUp 2026", "details": "Scale grips and highlighted window edges remained visible throughout the close-up inspection."}, {"start_s": 12229.587, "end_s": 12240.07, "action": "Scrolled and navigated away from the close-up, entered characters, clicked the model, and orbited back toward the building; ended on a close view of the window from the front.", "intent": "Review the edited window in the broader model and return to its facade view.", "app": "SketchUp 2026", "details": "The view briefly showed the model from a distant exterior angle before returning to the window."}, {"start_s": 12240.07, "end_s": 12250.105, "action": "Selected the window assembly, navigated and zoomed around it, entered characters, and adjusted the scale grips; ended with the full window selected on the building facade.", "intent": "Continue scaling and verify the window assembly's final placement.", "app": "SketchUp 2026", "details": "The final view showed the two-panel window outlined in blue with green scale grips."}, {"start_s": 12250.105, "end_s": 12260.049, "action": "Navigated around the SketchUp model with repeated view adjustments, clicks, and drags, then zoomed into a window and adjacent room area.", "intent": "Inspect the modeled building and focus on a window assembly.", "app": "SketchUp 2026", "details": "The view changed from a wide building overview to a close-up of a glazed window."}, {"start_s": 12260.049, "end_s": 12269.659, "action": "Typed a shortcut, continued navigating and zooming, and selected the window frame; the view ended on the exterior wall and balcony area.", "intent": "Inspect and select the window component for possible editing.", "app": "SketchUp 2026", "details": "The window edges were highlighted blue in the intermediate view."}, {"start_s": 12269.659, "end_s": 12279.031, "action": "Navigated around the exterior window with repeated zooming and clicks, then selected the window assembly and moved to a close oblique view of its frame.", "intent": "Examine the selected window geometry from different angles.", "app": "SketchUp 2026", "details": "The window remained outlined in blue while the camera moved closer and around its edges."}, {"start_s": 12279.031, "end_s": 12288.975, "action": "Continued zooming and orbiting around the selected window, clicked near its frame, and ended focused on the lower sill and adjacent interior floor.", "intent": "Inspect the window sill and frame details.", "app": "SketchUp 2026", "details": "The selected frame and lower sill filled most of the viewport."}, {"start_s": 12288.975, "end_s": 12298.718, "action": "Clicked the lower window sill, typed several keys, navigated slightly, and activated the Tape Measure tool to place or inspect a measurement along the sill.", "intent": "Measure or verify a dimension at the window sill.", "app": "SketchUp 2026", "details": "The Tape Measure cursor and a visible length readout appeared near the sill."}, {"start_s": 12298.718, "end_s": 12307.917, "action": "Adjusted the view, clicked and dragged near the lower-right corner of the selected window, and continued positioning the geometry or measurement endpoint along the sill.", "intent": "Refine the window-sill measurement or manipulate the selected frame corner.", "app": "SketchUp 2026", "details": "The selected window edges stayed highlighted blue and the distance readout changed during the drag."}, {"start_s": 12307.917, "end_s": 12317.977, "action": "Scrolled and orbited around the SketchUp building model, then adjusted the view to move from a close-up window detail to an exterior overhead perspective.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "The view ended on an overhead exterior view of the building."}, {"start_s": 12317.977, "end_s": 12328.173, "action": "Selected model geometry and navigated with scrolling and middle-button view adjustments; entered a distance value of 2 and confirmed it, then deleted the dashed guide lines.", "intent": "Modify or clean up model construction guides while inspecting the building.", "app": "SketchUp 2026", "details": "The status bar confirmed deletion of all dashed guide lines."}, {"start_s": 12328.173, "end_s": 12338.241, "action": "Navigated to a room and placed a guide, entering 2\" and confirming the value; then orbited back to a wider overhead view of the building.", "intent": "Create a measured construction guide in the model.", "app": "SketchUp 2026", "details": "A guide line was visible across the room opening before the view was changed."}, {"start_s": 12338.241, "end_s": 12346.667, "action": "Scrolled and orbited toward a window, selected its geometry, and began moving the selected window components.", "intent": "Adjust the position of a window assembly.", "app": "SketchUp 2026", "details": "The window geometry was highlighted in blue and the move tool was active."}, {"start_s": 12346.667, "end_s": 12358.029, "action": "Continued navigating and moving the selected window assembly, carrying it away from the wall and across the model while changing the camera to an overhead view.", "intent": "Reposition or copy the window assembly within the building model.", "app": "SketchUp 2026", "details": "The selected window remained highlighted and the distance field showed a large movement value."}, {"start_s": 12358.029, "end_s": 12368.222, "action": "Selected the detached window assembly, moved it near the building facade, and activated the Rotate tool to set its rotation center.", "intent": "Position and orient the window assembly for placement.", "app": "SketchUp 2026", "details": "The window was selected outside the building, with the rotation protractor visible at its corner."}, {"start_s": 12368.222, "end_s": 12376.942, "action": "Orbited and zoomed around the SketchUp interior model, then selected and began positioning a window or frame component.", "intent": "Inspect and adjust the selected model component.", "app": "SketchUp 2026", "details": "The view changed from an overhead room view to a close-up of a blue-highlighted frame."}, {"start_s": 12376.942, "end_s": 12386.792, "action": "Continued navigating around the selected frame with repeated zooming and orbiting, ending with the component still highlighted near a wall opening.", "intent": "Examine the component\u2019s placement in the wall opening.", "app": "SketchUp 2026", "details": "The status bar indicated an active move operation and displayed changing distances."}, {"start_s": 12386.792, "end_s": 12397.394, "action": "Orbited and zoomed toward the wall window, then continued manipulating the selected frame near its lower-right corner.", "intent": "Position or inspect the window frame geometry.", "app": "SketchUp 2026", "details": "The view moved from the wall and window to a close-up of the highlighted lower frame edge."}, {"start_s": 12397.394, "end_s": 12406.703, "action": "Navigated around the window and adjacent room, dragged near the model geometry, and opened the Edit menu.", "intent": "Review the window placement and access editing commands.", "app": "SketchUp 2026", "details": "The final view showed the Edit menu with Undo Move available."}, {"start_s": 12406.703, "end_s": 12416.762, "action": "Dismissed or changed the menu state, then orbited and zoomed around the room to inspect the window from several angles and began another selection or drag near it.", "intent": "Continue reviewing the window and surrounding geometry.", "app": "SketchUp 2026", "details": "The window remained visible from changing interior viewpoints."}, {"start_s": 12416.762, "end_s": 12426.952, "action": "Selected the window assembly, activated the Scale tool, and adjusted the selected component while zooming into its lower frame.", "intent": "Resize the window assembly.", "app": "SketchUp 2026", "details": "Blue outlines and green scale grips appeared around the window; the status bar showed the Scale tool and a red scale value near 0.78."}, {"start_s": 12426.952, "end_s": 12437.145, "action": "Scrolled and clicked around the selected window assembly, changing from orbit manipulation to the Scale tool; left-clicked the assembly so scale grips appeared.", "intent": "Adjust the view and prepare the window assembly for scaling.", "app": "SketchUp 2026", "details": "A window-like frame remained selected, with blue edges and scale grips visible."}, {"start_s": 12437.145, "end_s": 12446.892, "action": "Zoomed and orbited away from the close-up, then navigated around the model to show the larger floor-plan assemblies from multiple angles.", "intent": "Inspect the overall model and locate another area for editing.", "app": "SketchUp 2026", "details": "The view changed from the window close-up to a distant multi-room model and then an angled building view."}, {"start_s": 12446.892, "end_s": 12457.044, "action": "Orbited and zoomed between the separate building assemblies, then moved into a close-up interior view and selected a window area.", "intent": "Inspect model components and return to the window for editing.", "app": "SketchUp 2026", "details": "The final view showed a close-up of a selected blue-outlined window beside interior floor details."}, {"start_s": 12457.044, "end_s": 12467.142, "action": "Scrolled and repositioned the view around the selected window, then clicked to begin moving or copying the selected item; the distance readout appeared while the window remained highlighted.", "intent": "Position and adjust the selected window component.", "app": "SketchUp 2026", "details": "SketchUp showed the move/copy status and a distance measurement while the window stayed selected."}, {"start_s": 12467.142, "end_s": 12477.895, "action": "Scrolled and edited the close-up window view, clicked and dragged on the selected frame, and switched back to scaling so green grips and yellow-highlighted edges appeared.", "intent": "Refine the window component's size or placement.", "app": "SketchUp 2026", "details": "The selected window filled the view, with scale grips visible by the end of the span."}, {"start_s": 12477.895, "end_s": 12487.697, "action": "Clicked and adjusted the selected window with the Scale tool, changing the scale readout to approximately 1.18 while zooming around the frame.", "intent": "Scale the selected window assembly.", "app": "SketchUp 2026", "details": "The final view showed the window selected with green scale grips and a scale factor of approximately 1.18."}, {"start_s": 12487.697, "end_s": 12497.82, "action": "Adjusted the selected window assembly with the Scale tool while zooming and scrolling around its frame; left the scale operation active at approximately 0.99.", "intent": "Refine the selected window assembly's dimensions.", "app": "SketchUp 2026", "details": "Selected window geometry remained highlighted in blue with scale grips."}, {"start_s": 12497.82, "end_s": 12508.148, "action": "Continued scaling the selected window assembly while navigating from its upper frame to the lower sill; left the scale value at approximately 0.98.", "intent": "Continue refining the window assembly size.", "app": "SketchUp 2026", "details": "The selected window remained highlighted and the Scale tool stayed active."}, {"start_s": 12508.148, "end_s": 12512.706, "action": "Exited the close-up scale view, navigated to a wider model view, and switched back to selection/orbit navigation around the building models.", "intent": "Review the adjusted window in the broader model context.", "app": "SketchUp 2026", "details": "The view ended with two building models visible and no active scale grips."}, {"start_s": 12512.706, "end_s": 12525.681, "action": "Scrolled and zoomed through the building interior toward a wall-mounted vent or window detail, ending on a close-up inspection.", "intent": "Inspect another wall opening or fixture in the model.", "app": "SketchUp 2026", "details": "The camera moved from a broad building view to a close-up of a rectangular wall fixture."}, {"start_s": 12525.681, "end_s": 12535.557, "action": "Selected the wall-mounted rectangular fixture, typed a single character, then navigated and moved the selected geometry; ended with multiple related outlines highlighted in blue.", "intent": "Modify or reposition the selected wall fixture geometry.", "app": "SketchUp 2026", "details": "The Move tool status indicated the selected items were being copied or placed, with a distance of about 4 inches shown."}, {"start_s": 12535.557, "end_s": 12545.349, "action": "Navigated around the building exterior and interior with zooming and orbiting, then dragged to rotate the camera around the model.", "intent": "Review the fixture and surrounding building geometry from different angles.", "app": "SketchUp 2026", "details": "The view ended in an overhead oblique perspective of the building."}, {"start_s": 12545.349, "end_s": 12555.021, "action": "Scrolled and clicked around the SketchUp model, then selected the rectangular wall-mounted assembly; the final view showed its geometry highlighted in blue.", "intent": "Inspect and select the modeled assembly.", "app": "SketchUp 2026", "details": "The model remained in a perspective view with the selected rectangular assembly on a wall."}, {"start_s": 12555.021, "end_s": 12564.723, "action": "Typed short inputs, orbited and navigated the 3D view, and clicked the selected assembly; the view changed to show the assembly mounted on an interior wall, ending with it deselected.", "intent": "Adjust the view and inspect the assembly in context.", "app": "SketchUp 2026", "details": "The assembly appeared on the wall beneath a small rectangular opening."}, {"start_s": 12564.723, "end_s": 12575.008, "action": "Activated orbit and rotated the selected assembly/view, then clicked and typed briefly; the assembly remained visible on the wall from a closer angle and was ultimately deselected.", "intent": "Reorient and inspect the assembly placement.", "app": "SketchUp 2026", "details": "The orbit tool and rotation guide were visible during part of the span."}, {"start_s": 12575.008, "end_s": 12585.184, "action": "Rotated and navigated the model, clicked the assembly, and entered brief inputs; the view shifted to a more frontal perspective with the assembly selected in blue.", "intent": "Fine-tune the view and continue manipulating the assembly.", "app": "SketchUp 2026", "details": "The selected assembly was centered between interior wall surfaces."}, {"start_s": 12585.184, "end_s": 12594.057, "action": "Moved and repositioned the selected assembly while entering measurement-like text; the camera shifted beneath the wall opening and the assembly remained highlighted.", "intent": "Position or adjust the assembly using SketchUp tools.", "app": "SketchUp 2026", "details": "The Move tool status showed a distance value, and the assembly was viewed from below."}, {"start_s": 12594.057, "end_s": 12603.507, "action": "Entered additional measurement-like inputs, clicked and navigated the view, and created or adjusted a guide along the assembly; the final view showed the assembly selected on the wall with a dashed guide line beneath it.", "intent": "Set a guide or alignment reference for the assembly.", "app": "SketchUp 2026", "details": "The status bar showed a guide operation with a length value of 2."}, {"start_s": 12603.507, "end_s": 12613.845, "action": "Clicked and scrolled around the selected building model, entered a scale-related interaction, and adjusted the view while scale grips remained visible.", "intent": "Adjust the selected model geometry or scale settings.", "app": "SketchUp 2026", "details": "The model remained selected with scale grips and a scale status prompt visible."}, {"start_s": 12613.845, "end_s": 12623.465, "action": "Orbited and zoomed around the building, then opened the File menu and left it displayed over the model.", "intent": "Inspect the model from another angle and access file commands.", "app": "SketchUp 2026", "details": "The File menu was open with save, export, and recent-file commands visible."}, {"start_s": 12623.465, "end_s": 12633.951, "action": "Closed the menu and orbited and zoomed the scene, changing from a wider view of two building models to a close exterior view.", "intent": "Review the building models from different viewpoints.", "app": "SketchUp 2026", "details": "Two separate building structures were visible before the view moved close to an exterior wall."}, {"start_s": 12633.951, "end_s": 12644.148, "action": "Continued orbiting and zooming around the two building models, moving between wider overhead views and closer views of the walls and rooms.", "intent": "Inspect the model layout and exterior geometry.", "app": "SketchUp 2026", "details": "The camera ended on a wide elevated view showing both structures and surrounding ground outlines."}, {"start_s": 12644.148, "end_s": 12654.161, "action": "Orbited and zoomed toward the larger building, inspecting its rooms, walls, and fixtures from overhead and exterior angles.", "intent": "Review interior layout and architectural details.", "app": "SketchUp 2026", "details": "The view moved from a high overview to a closer view of the larger floor plan and the smaller building behind it."}, {"start_s": 12654.161, "end_s": 12663.555, "action": "Zoomed far out, then navigated back toward the larger model and selected a window component near the end of the interval.", "intent": "Inspect and select a building element.", "app": "SketchUp 2026", "details": "The final view showed a blue-highlighted window on an interior wall."}, {"start_s": 12663.555, "end_s": 12674.551, "action": "Scrolled and orbited around the SketchUp house model, then selected and repositioned a window component while changing the camera view.", "intent": "Adjust the placement or inspect the selected window in the 3D model.", "app": "SketchUp", "details": "A window remained highlighted in blue as the view shifted from a close interior view to an overhead room view."}, {"start_s": 12674.551, "end_s": 12682.574, "action": "Orbited and zoomed toward the selected window above the kitchen sink, then clicked and activated a guide or measurement operation near its lower edge.", "intent": "Inspect and measure the window placement relative to the surrounding wall and sink.", "app": "SketchUp", "details": "The window was selected in blue; a guide-like line and endpoint appeared below the sill, with a length readout visible."}, {"start_s": 12682.574, "end_s": 12693.464, "action": "Entered a numeric value with Enter and typed additional input, then dragged along the lower window trim to modify or position the selected geometry.", "intent": "Set a dimension and adjust the selected window or trim geometry.", "app": "SketchUp", "details": "The view stayed focused on the window above the sink, with blue-selected trim and a move/drag operation visible."}, {"start_s": 12693.464, "end_s": 12702.815, "action": "Orbited and zoomed around the window, typed a character, selected a narrow side element, and applied a scale operation that produced a visible 0.72 factor.", "intent": "Resize the selected window-side component and inspect its placement from different angles.", "app": "SketchUp", "details": "The selected narrow vertical element was highlighted with a yellow scale bounding box before the view changed to show the window in the wall."}, {"start_s": 12702.815, "end_s": 12712.835, "action": "Clicked and orbited around the window, selected its upper frame, and manipulated the model until the camera pulled back to an exterior view of the house.", "intent": "Inspect the adjusted window and review the model from outside.", "app": "SketchUp", "details": "The window frame was highlighted in blue and yellow during manipulation; the final evidence showed the house exterior with a person and site context."}, {"start_s": 12712.835, "end_s": 12723.108, "action": "Orbited and zoomed out through multiple views of the house, then ended on a distant overview showing the complete floor-plan model and part of another model below.", "intent": "Review the overall building model and its surrounding context after the window edits.", "app": "SketchUp", "details": "The camera moved from a close exterior wall view to a broad overhead perspective of the building layout."}, {"start_s": 12723.108, "end_s": 12732.415, "action": "Scrolled and adjusted the view around a window, then selected the window assembly and began moving it; the assembly remained highlighted in blue.", "intent": "Position or edit the selected window assembly in the 3D model.", "app": "SketchUp 2026", "details": "Window assembly shown selected with a move operation active."}, {"start_s": 12732.415, "end_s": 12742.999, "action": "Scrolled and repositioned the view closer to the selected window, then switched to a scale operation on the window components.", "intent": "Adjust the size or proportions of the selected window assembly.", "app": "SketchUp 2026", "details": "Window remained highlighted; scale handles appeared on the assembly."}, {"start_s": 12742.999, "end_s": 12752.291, "action": "Selected and manipulated the window assembly, entered scale-related adjustments, then zoomed out to show two building models in the workspace.", "intent": "Edit the window assembly and review its placement in the broader model context.", "app": "SketchUp 2026", "details": "The final view showed two separate architectural floor-plan models."}, {"start_s": 12752.291, "end_s": 12761.689, "action": "Navigated through the model with repeated orbit and zoom gestures, moving from the overview into a closer elevated view of the larger floor-plan building.", "intent": "Inspect the architectural model from different viewpoints.", "app": "SketchUp 2026", "details": "The view changed from a distant overview to a detailed oblique interior view."}, {"start_s": 12761.689, "end_s": 12771.191, "action": "Continued orbiting and zooming around the architectural models, alternating between broad overviews and closer views of rooms and walls.", "intent": "Review the building layout and model geometry.", "app": "SketchUp 2026", "details": "No distinct object edit was visible; navigation focused on inspection."}, {"start_s": 12771.191, "end_s": 12780.333, "action": "Orbited and zoomed toward the larger building, ending on a closer elevated view of its interior rooms, walls, windows, and furniture outlines.", "intent": "Inspect interior layout details of the architectural model.", "app": "SketchUp 2026", "details": "The final view focused on the larger floor-plan model."}, {"start_s": 12780.333, "end_s": 12787.701, "action": "Orbited and zoomed around the SketchUp architectural model, moving from a broad view of both structures to a closer view of the larger floor plan.", "intent": "Inspect the building layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 12787.701, "end_s": 12805.144, "action": "Zoomed and orbited around the two building models, then pulled back to show both structures together.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 12805.144, "end_s": 12812.399, "action": "Adjusted the camera and opened the Edit menu, highlighting the Delete Guides command before returning to the model and zooming into the interior rooms.", "intent": "Review model-editing options and inspect the interior.", "app": "SketchUp 2026", "details": "The Edit menu visibly showed Delete Guides highlighted; no confirmed command execution was shown."}, {"start_s": 12812.399, "end_s": 12822.431, "action": "Scrolled and orbited through close interior views, examining room partitions, bathroom fixtures, doors, and a wall window.", "intent": "Inspect interior architectural details.", "app": "SketchUp 2026", "details": null}, {"start_s": 12822.431, "end_s": 12832.682, "action": "Orbited and zoomed back out from the close interior view to a wider perspective showing both building models and their surrounding outlines.", "intent": "Reorient and compare the two structures in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 12832.682, "end_s": 12843.407, "action": "Selected a wall-window component, typed m to activate Move, and navigated around the model while keeping the component selected; the final view showed the selected blue-highlighted element near an interior wall.", "intent": "Position or prepare to move a model component.", "app": "SketchUp 2026", "details": "The Move tool was active and the selected component remained highlighted; no completed placement was confirmed."}, {"start_s": 12843.407, "end_s": 12856.205, "action": "Adjusted the SketchUp camera around the interior model, selected a wall-mounted object, rotated it, and entered 90 as the rotation angle.", "intent": "Orient a selected model component within the room.", "app": "SketchUp 2026", "details": "The selected object was visibly rotated with the Rotate tool."}, {"start_s": 12856.205, "end_s": 12866.695, "action": "Orbited and zoomed around the building, inspected different rooms, and selected a wall-mounted vent-like component.", "intent": "Navigate the model and inspect or select another component.", "app": "SketchUp 2026", "details": "The view changed from a close interior perspective to a broader overhead view with the component selected."}, {"start_s": 12866.695, "end_s": 12876.457, "action": "Entered 2 and confirmed it, then navigated to a close-up wall view and moved or selected the vent-like component.", "intent": "Position or edit the selected component in the model.", "app": "SketchUp 2026", "details": "The Measurements box showed Length 2 during the operation."}, {"start_s": 12876.457, "end_s": 12887.331, "action": "Moved the selected vent-like component while orbiting and zooming around it, then continued navigating until the object moved out of view.", "intent": "Place the component on the building wall.", "app": "SketchUp 2026", "details": "The Move tool displayed a distance readout while the selected component was repositioned."}, {"start_s": 12887.331, "end_s": 12897.178, "action": "Zoomed and orbited around the selected wall component, then activated Scale and adjusted its grips to resize it.", "intent": "Resize the selected model component.", "app": "SketchUp 2026", "details": "Green scale grips surrounded the selected vent-like assembly."}, {"start_s": 12897.178, "end_s": 12907.165, "action": "Scaled and inspected the selected component, orbited and zoomed out, then navigated to a broad view showing multiple building models.", "intent": "Finalize the component adjustment and review the overall model context.", "app": "SketchUp 2026", "details": "The final view showed two separate building layouts in the SketchUp workspace."}, {"start_s": 12907.165, "end_s": 12917.07, "action": "Navigated around the SketchUp model with repeated scrolling and clicks, then zoomed or dragged toward a wall-mounted window or vent detail.", "intent": "Inspect the architectural model and focus on a wall detail.", "app": "SketchUp 2026", "details": "The view changed from an overview of two building models to a close-up of a wall opening."}, {"start_s": 12917.07, "end_s": 12927.512, "action": "Selected or manipulated the close-up wall detail, typed a single character, and continued scrolling until the view shifted to a larger selected building section with blue outlines and a move tool active.", "intent": "Adjust or copy geometry within the architectural model.", "app": "SketchUp 2026", "details": "The status bar indicated an active move/copy-style operation with a distance readout."}, {"start_s": 12927.512, "end_s": 12938.475, "action": "Scrolled through the selected building section and dragged near its lower-left edge, keeping the geometry highlighted in blue while changing the view and operation position.", "intent": "Position or inspect the selected model geometry.", "app": "SketchUp 2026", "details": "The selected section showed repeated horizontal elements and a vent-like panel."}, {"start_s": 12938.475, "end_s": 12948.867, "action": "Scrolled and clicked around the selected wall assembly, typed a single character, and used the scale tool to adjust the assembly; the view zoomed out and displayed scale grips around it.", "intent": "Resize the selected architectural component.", "app": "SketchUp 2026", "details": "The status bar showed scaling in progress, with red and blue scale readouts and green grips."}, {"start_s": 12948.867, "end_s": 12959.354, "action": "Confirmed or manipulated the scaled selection, then orbited and scrolled away from the close-up to review the broader multi-room building model from several angles.", "intent": "Review the resized component in the overall model.", "app": "SketchUp 2026", "details": "The view progressed from the selected wall assembly to an exterior overview of the building interiors and partitions."}, {"start_s": 12959.354, "end_s": 12969.464, "action": "Orbited and scrolled around the architectural model, clicking in the scene while moving from an exterior overview to a closer elevated view of the building\u2019s rooms and partitions.", "intent": "Inspect the building layout from different viewpoints.", "app": "SketchUp 2026", "details": "The final view showed a detailed oblique view of multiple rooms, walls, doors, and fixtures."}, {"start_s": 12969.464, "end_s": 12979.864, "action": "Navigated around the SketchUp architectural model with repeated view adjustments and middle-click orbiting, moving from a wide two-building view into a close-up of a window, doorway, and adjacent room.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 12979.864, "end_s": 12988.755, "action": "Zoomed and orbited through the model, alternating between a wider view of both building layouts and a closer overhead view of rooms, walls, windows, and floor fixtures.", "intent": "Review the building layout and interior details.", "app": "SketchUp 2026", "details": null}, {"start_s": 12988.755, "end_s": 13003.862, "action": "Continued orbiting and zooming around the architectural model, shifting from an overhead view of upper rooms to a broader view of the second building and its interior partitions.", "intent": "Examine different sections of the modeled floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 13003.862, "end_s": 13011.25, "action": "Zoomed out to show both building models and their surrounding outlines, then adjusted the view back toward a centered overhead comparison of the two layouts.", "intent": "Compare the two modeled building layouts in the scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 13011.25, "end_s": 13022.909, "action": "Orbited and zoomed into the left building, inspecting its upper rooms, windows, doors, central stairwell, and surrounding walls from progressively closer angles.", "intent": "Inspect interior arrangement and architectural components of the left model.", "app": "SketchUp 2026", "details": null}, {"start_s": 13022.909, "end_s": 13033.935, "action": "Orbited and zoomed around a doorway area; clicked near the model and typed \u201cm,\u201d then selected geometry and ended with a door or frame highlighted in blue while the Move tool was active.", "intent": "Select and prepare to move a door-related model component.", "app": "SketchUp 2026", "details": "The final view shows a selected blue-outlined door/frame component and the Move tool status."}, {"start_s": 13033.935, "end_s": 13043.727, "action": "Navigated and zoomed around the selected wooden door in the SketchUp model, changing the view from the room to a close-up of the door and hardware.", "intent": "Inspect the door geometry and hardware closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 13043.727, "end_s": 13053.532, "action": "Adjusted the view around the door and used the Scale tool, leaving the door selected with scale grips visible while zooming and repositioning the camera.", "intent": "Prepare or inspect the selected door for resizing.", "app": "SketchUp 2026", "details": "The selected door remained highlighted with green scale handles."}, {"start_s": 13053.532, "end_s": 13061.539, "action": "Changed the camera view from the full building to the door area, then zoomed back in on the wooden door and its handle.", "intent": "Review the door within the larger model and return to detailed inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 13061.539, "end_s": 13070.555, "action": "Zoomed and orbited around the door, selected it, and began moving or copying geometry near the lower door edge; the view ended in a close-up with a distance readout.", "intent": "Position or modify the selected door geometry.", "app": "SketchUp 2026", "details": "The status bar indicated an active move/copy placement operation."}, {"start_s": 13070.555, "end_s": 13080.307, "action": "Continued orbiting and zooming around the building and door, keeping the door selected and adjusting the active placement view.", "intent": "Inspect the door placement from different model viewpoints.", "app": "SketchUp 2026", "details": "The door remained outlined in blue while the move/copy distance readout changed."}, {"start_s": 13080.307, "end_s": 13089.552, "action": "Selected the door and used the Scale tool, zooming into its edges and adjusting the view while leaving scale grips active.", "intent": "Resize or fine-tune the selected door geometry.", "app": "SketchUp 2026", "details": "The final view showed the door selected with green scale handles and a scale readout of 1.00."}, {"start_s": 13089.552, "end_s": 13100.138, "action": "Orbited and zoomed around a selected wooden door or panel, then activated the Scale tool and adjusted the view while keeping the object selected.", "intent": "Inspect and scale the selected model component.", "app": "SketchUp 2026", "details": null}, {"start_s": 13100.138, "end_s": 13109.81, "action": "Navigated away from the close-up through orbiting, panning, and zooming to review two separate house-model layouts from wider and elevated views.", "intent": "Review the overall 3D model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 13109.81, "end_s": 13122.41, "action": "Orbited and zoomed around the house models, moving from a broad comparison view to a closer elevated view of the larger floor plan and its rooms, stairs, windows, and doors.", "intent": "Inspect the architectural model from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 13122.41, "end_s": 13132.477, "action": "Zoomed out to compare both model layouts, then zoomed back into the smaller house and inspected its upper rooms, stairwell, windows, and brown doors.", "intent": "Compare layouts and examine the smaller model\u2019s details.", "app": "SketchUp 2026", "details": null}, {"start_s": 13132.477, "end_s": 13138.395, "action": "Zoomed into a selected brown door, typed \u201cm,\u201d and began moving or copying the selected door component; continued zooming and clicking while positioning it near the doorway.", "intent": "Position or copy the selected door component.", "app": "SketchUp 2026", "details": "The move/copy operation remained active at the end of the span."}, {"start_s": 13138.395, "end_s": 13148.699, "action": "Continued navigating and positioning the selected door component with the Move tool, zooming from the doorway to a distant view and leaving the component attached to the cursor for placement.", "intent": "Continue placing the copied door component in the model.", "app": "SketchUp 2026", "details": "The Move tool remained active, with a distance value shown and no confirmed final placement."}, {"start_s": 13148.699, "end_s": 13158.946, "action": "Orbited and zoomed around the 3D apartment model, moving from an overhead floor-plan view into a close-up of a selected wooden door.", "intent": "Inspect the model and selected door from different viewpoints.", "app": "SketchUp 2026", "details": "The door remained highlighted while the camera moved closer."}, {"start_s": 13158.946, "end_s": 13169.191, "action": "Continued orbiting and zooming through the apartment model, briefly bringing bathrooms and adjacent rooms into view while the active tool remained engaged.", "intent": "Navigate the model to inspect another area.", "app": "SketchUp 2026", "details": "The view changed from a close-up to a wider interior view."}, {"start_s": 13169.191, "end_s": 13179.377, "action": "Selected the wooden door, switched to the Scale tool, and dragged a scale handle while zooming in for adjustment.", "intent": "Resize the selected door component.", "app": "SketchUp 2026", "details": "The door displayed yellow selection bounds and green scale grips; the scale readout reached 0.39."}, {"start_s": 13179.377, "end_s": 13189.682, "action": "Exited the close scaling view, navigated back to the apartment, and selected the door for inspection from a wider view before zooming toward it again.", "intent": "Review the door placement and continue editing.", "app": "SketchUp 2026", "details": "The model was shown from an overhead view and then from a hallway close-up."}, {"start_s": 13189.682, "end_s": 13200.099, "action": "Re-entered scaling on the selected wooden door and adjusted its visible bounds while panning and zooming around the upper portion.", "intent": "Continue resizing the door.", "app": "SketchUp 2026", "details": "The door remained selected with yellow bounds and green grips."}, {"start_s": 13200.099, "end_s": 13210.077, "action": "Switched back to navigation, orbited and zoomed out across the apartment, then moved to another interior area near multiple doors and rooms.", "intent": "Review the updated model from broader viewpoints.", "app": "SketchUp 2026", "details": "The final view showed a wider interior section with several doors and partitions."}, {"start_s": 13210.077, "end_s": 13219.708, "action": "Orbited and zoomed around the SketchUp apartment model, moving from a close interior view to a wider overhead view.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 13219.708, "end_s": 13230.563, "action": "Selected a wooden door, entered a move operation, and navigated around it while changing the viewing angle and zoom.", "intent": "Adjust or inspect the door component in the model.", "app": "SketchUp 2026", "details": "The door remained highlighted during the move operation."}, {"start_s": 13230.563, "end_s": 13239.903, "action": "Navigated to a wider apartment view, then zoomed toward and manipulated the selected wooden door with repeated orbiting and clicks.", "intent": "Position or inspect the selected door within the interior layout.", "app": "SketchUp 2026", "details": "The selected door stayed highlighted and the move-distance indicator remained visible."}, {"start_s": 13239.903, "end_s": 13250.131, "action": "Zoomed and orbited around the apartment, selected the door, and activated the Scale tool to resize it.", "intent": "Resize the door component.", "app": "SketchUp 2026", "details": "The door was outlined in yellow and blue; the visible scale value reached 1.15."}, {"start_s": 13250.131, "end_s": 13260.564, "action": "Continued scaling and repositioning the selected door, then zoomed and orbited back to a wider apartment view.", "intent": "Finalize the door adjustment and review its placement.", "app": "SketchUp 2026", "details": "The Scale tool showed a value of 1.00 before the broader model view was restored."}, {"start_s": 13260.564, "end_s": 13270.656, "action": "Orbited and zoomed through the apartment interior toward another wooden door, ending on a close view of the door beside the dining area.", "intent": "Inspect another door and its surrounding placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 13270.656, "end_s": 13280.357, "action": "Clicked in the SketchUp model, then scrolled without a visible change.", "intent": "Navigate or adjust the model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 13280.357, "end_s": 13290.376, "action": "Selected the wooden door assembly, entered a move operation, and dragged it to a new position while scrolling the view.", "intent": "Reposition the selected door assembly in the model.", "app": "SketchUp 2026", "details": "The door and surrounding trim remained highlighted during the move."}, {"start_s": 13290.376, "end_s": 13302.364, "action": "Clicked to place the moved door assembly, exited the active operation, and returned to a wider model view.", "intent": "Complete the door placement and review its location.", "app": "SketchUp 2026", "details": "The door was visible in the wider floor-plan view."}, {"start_s": 13302.364, "end_s": 13316.843, "action": "Selected the door assembly and activated the Rotate tool, showing the rotation gizmo and a 60-degree angle readout.", "intent": "Prepare to rotate the door assembly.", "app": "SketchUp 2026", "details": "The door remained selected while the rotation tool was active."}, {"start_s": 13316.843, "end_s": 13326.145, "action": "Positioned the rotation center and manipulated the rotation gizmo around the selected door while adjusting the model view.", "intent": "Rotate the door assembly within the floor plan.", "app": "SketchUp 2026", "details": "The rotation tool displayed axis guidance, including the green axis."}, {"start_s": 13326.145, "end_s": 13336.006, "action": "Adjusted the rotation of the selected door assembly, dragging it to a new orientation and reaching an angle readout of about 195 degrees.", "intent": "Set the door assembly to a revised orientation.", "app": "SketchUp 2026", "details": "The door remained selected with rotation grips visible."}, {"start_s": 13336.006, "end_s": 13345.117, "action": "Clicked the selected wooden door and nearby controls while the Rotate tool remained active.", "intent": "Continue manipulating the selected door component.", "app": "SketchUp 2026", "details": null}, {"start_s": 13345.117, "end_s": 13355.433, "action": "Entered 180 and confirmed it, rotating the selected door; then navigated the view outward and switched back to selection.", "intent": "Rotate the door component and inspect its placement in the model.", "app": "SketchUp 2026", "details": "The angle field briefly showed 18 during the rotation before the view changed to a wider model view."}, {"start_s": 13355.433, "end_s": 13363.513, "action": "Selected and moved the door component, entered a movement distance, and repositioned it near the hallway and dining area.", "intent": "Adjust the door's position within the floor-plan model.", "app": "SketchUp 2026", "details": "The movement tool showed a distance of approximately 2' 6 3/16\"."}, {"start_s": 13363.513, "end_s": 13372.922, "action": "Selected the surrounding geometry and activated Rotate, positioning the rotation center and adjusting the selected door or wall assembly.", "intent": "Prepare and manipulate the door assembly's orientation.", "app": "SketchUp 2026", "details": "Blue outlines marked the selected surrounding walls and door geometry."}, {"start_s": 13372.922, "end_s": 13383.149, "action": "Rotated the selected door component further, reaching an angle of 22.3, then navigated to a wider overhead view with the door selected.", "intent": "Refine the door orientation and review its placement.", "app": "SketchUp 2026", "details": "The door appeared nearly edge-on during rotation and was later shown in a wider room layout."}, {"start_s": 13383.149, "end_s": 13392.615, "action": "Orbit-panned and zoomed around the SketchUp model, moving from the interior hallway and rooms to an exterior wall and stair view.", "intent": "Inspect the overall model and the adjusted door placement from different viewpoints.", "app": "SketchUp 2026", "details": "No further geometry edit was evident; the final view showed the building exterior, windows, doors, and stairs."}, {"start_s": 13392.615, "end_s": 13402.257, "action": "Scrolled extensively through the SketchUp model, then middle-clicked to change the view, ending on a distant view of the wooden door object.", "intent": "Adjust the 3D view to inspect the modeled door.", "app": "SketchUp", "details": null}, {"start_s": 13402.257, "end_s": 13415.401, "action": "Selected the Rotate tool, clicked the door object, and entered rotation input while the rotation protractor appeared around it.", "intent": "Rotate the door component in the model.", "app": "SketchUp", "details": "The rotation angle field visibly showed 75.0."}, {"start_s": 13415.401, "end_s": 13430.166, "action": "Continued rotating the selected door with clicks and typed input, then switched back to the Select tool; the door remained isolated in the distant model view.", "intent": "Complete and inspect the door rotation.", "app": "SketchUp", "details": null}, {"start_s": 13430.166, "end_s": 13438.764, "action": "Restored and resized the SketchUp window, then selected the Rotate tool and clicked the door object to begin another rotation operation.", "intent": "Reposition the workspace and adjust the door orientation.", "app": "SketchUp", "details": "The model briefly displayed a loading indicator and a black area during window resizing."}, {"start_s": 13438.764, "end_s": 13448.554, "action": "Scrolled while the door remained selected and used the Rotate tool; the object changed to a more horizontal orientation and the angle field showed 120.0.", "intent": "Continue rotating the door component.", "app": "SketchUp", "details": null}, {"start_s": 13448.554, "end_s": 13458.369, "action": "Entered rotation-related keyboard input, orbited and zoomed the camera around the wooden door, and dragged near the lower model area; the view ended in a close-up of the door surface and hardware.", "intent": "Inspect the rotated door closely.", "app": "SketchUp", "details": null}, {"start_s": 13458.369, "end_s": 13468.585, "action": "Selected the wooden door and zoomed or adjusted the view around its handle, leaving the door geometry highlighted.", "intent": "Inspect the door and handle geometry.", "app": "SketchUp 2026", "details": "The view moved from the full door to a close-up of the selected door and handle."}, {"start_s": 13468.585, "end_s": 13478.689, "action": "Adjusted the camera around the handle, selected the handle area, and orbited to a close side view of the door hardware.", "intent": "Examine the handle from different angles.", "app": "SketchUp 2026", "details": "The final view shows the handle prominently with the Orbit tool active."}, {"start_s": 13478.689, "end_s": 13488.945, "action": "Orbited and zoomed around the handle, then copied or moved a cylindrical hardware component toward the left side of the door assembly.", "intent": "Position or duplicate the door hardware.", "app": "SketchUp 2026", "details": "A second cylindrical component appears selected beside the original handle."}, {"start_s": 13488.945, "end_s": 13498.647, "action": "Continued dragging the selected hardware while orbiting or zooming out, placing it separately to the right of the wooden door.", "intent": "Reposition the hardware component in the model.", "app": "SketchUp 2026", "details": "The final view shows the door on the left and a selected hardware piece floating to its right."}, {"start_s": 13498.647, "end_s": 13508.684, "action": "Navigated away from the door with orbit and zoom actions, revealing a larger building scene and a detached white-and-brown cylindrical assembly in the foreground.", "intent": "Inspect the detached component within the broader model.", "app": "SketchUp 2026", "details": "The view transitions from mostly empty space to the building facade and the separate assembly."}, {"start_s": 13508.684, "end_s": 13518.742, "action": "Selected and manipulated the detached cylindrical assembly, entered a character and spaces, then orbited and zoomed to show the door and building together from a wider angle.", "intent": "Inspect and position the detached assembly relative to the building.", "app": "SketchUp 2026", "details": "The final view shows the wooden door in the foreground with the building facade behind it."}, {"start_s": 13518.742, "end_s": 13529.198, "action": "Scrolled and clicked around the model\u2019s right-side opening, then adjusted the view and attempted keyboard/tool interactions while inspecting the geometry.", "intent": "Inspect and manipulate the 3D model around the side opening.", "app": "SketchUp 2026", "details": "Model remained visible in a close perspective view."}, {"start_s": 13529.198, "end_s": 13539.256, "action": "Selected the horizontal surface inside the right-side opening, entered repeated tool commands, and zoomed/panned closer until the surface was highlighted.", "intent": "Select and examine an interior model surface.", "app": "SketchUp 2026", "details": "The selected rectangular surface was highlighted with a purple stipple pattern."}, {"start_s": 13539.256, "end_s": 13549.571, "action": "Clicked and dragged on the selected interior geometry, navigated around the model, and attempted to modify it; SketchUp displayed a warning that curved or smoothed surfaces cannot be Push/Pulled.", "intent": "Attempt to edit the selected surface.", "app": "SketchUp 2026", "details": "The warning text read: \u201cCannot Push/Pull curved or smoothed surfaces.\u201d"}, {"start_s": 13549.571, "end_s": 13567.036, "action": "Navigated to the model\u2019s side assembly, selected curved and adjacent faces, and continued tool interactions while orbiting and zooming around the cylindrical brown component.", "intent": "Inspect and modify the curved side assembly.", "app": "SketchUp 2026", "details": "Different faces were highlighted during inspection, including the curved brown component and a large front face."}, {"start_s": 13567.036, "end_s": 13577.352, "action": "Switched back to the SketchUp window, zoomed and orbited out to reveal a larger wooden panel with two small hardware-like assemblies, opened the Materials tray, and activated the Paint Bucket/material tool.", "intent": "View the broader model and prepare to apply or inspect materials.", "app": "SketchUp 2026", "details": "The Materials tray showed the material name \u201cWood_Cherry_Original\u201d; the model was shown at a much smaller scale."}, {"start_s": 13577.352, "end_s": 13587.529, "action": "Navigated around the wooden panel and its hardware, then selected the detached right-side hardware assembly while keeping the Materials tray open.", "intent": "Inspect and select the separate hardware component for material or geometry work.", "app": "SketchUp 2026", "details": "The selected hardware assembly was outlined in blue, and the Materials tray remained visible."}, {"start_s": 13587.529, "end_s": 13597.843, "action": "Opened the context menu on the door hardware, selected and moved a hardware component, entered brief text values, and navigated the view with scrolling.", "intent": "Adjust the placement of a door hardware component.", "app": "SketchUp 2026", "details": "A wood-textured door and hardware are visible; the component remained selected during movement."}, {"start_s": 13597.843, "end_s": 13609.106, "action": "Zoomed and repositioned the camera around the door hardware, then clicked to place guide points near the latch.", "intent": "Set reference guides for positioning the hardware.", "app": "SketchUp 2026", "details": "The view changed to a close-up of the latch, with guide lines and measurement readouts visible."}, {"start_s": 13609.106, "end_s": 13618.163, "action": "Adjusted the view, clicked to create a guide, and entered 51/16\" followed by Enter.", "intent": "Define a measured guide location on the door.", "app": "SketchUp 2026", "details": "The guide measurement updated to 51/16\"."}, {"start_s": 13618.163, "end_s": 13627.559, "action": "Zoomed out to show the full door, entered brief inputs, and selected the separate hardware component beside the door.", "intent": "Prepare the second hardware component for placement.", "app": "SketchUp 2026", "details": "The detached component was selected to the right of the door."}, {"start_s": 13627.559, "end_s": 13637.0, "action": "Zoomed in, selected and moved the detached hardware toward the door edge, then continued adjusting the view and selection.", "intent": "Position the second hardware component on the door.", "app": "SketchUp 2026", "details": "The component appeared close to the right side of the door and remained selected."}, {"start_s": 13637.0, "end_s": 13647.12, "action": "Orbited and zoomed around the door hardware, switching views from the front to a close side perspective and clicking near the component.", "intent": "Inspect the hardware placement from different angles.", "app": "SketchUp 2026", "details": "The final view showed the hardware in close perspective against the door surface."}, {"start_s": 13647.12, "end_s": 13656.966, "action": "Adjusted the SketchUp camera around the wood-textured door assembly using clicks, orbiting, and zooming, ending on a front view of the door.", "intent": "Inspect the modeled door and hardware from different angles.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Cherry_Original."}, {"start_s": 13656.966, "end_s": 13663.222, "action": "Zoomed and orbited closely around the door surface and hardware, then returned to a wider front view and selected near the left hardware.", "intent": "Examine the door hardware and its placement.", "app": "SketchUp 2026", "details": "The view alternated between a close-up of the right-side hardware and the full door."}, {"start_s": 13663.222, "end_s": 13672.811, "action": "Zoomed far out to inspect the door in the broader model, then zoomed back into the hardware and clicked the left-side assembly.", "intent": "Navigate between the overall model and detailed hardware geometry.", "app": "SketchUp 2026", "details": "The door became very small in the scene before the view returned to a close-up."}, {"start_s": 13672.811, "end_s": 13682.91, "action": "Clicked and manipulated several faces around the hardware, including a drag across the circular assembly, while zooming and orbiting; exposed faces appeared selected or highlighted.", "intent": "Edit or inspect individual hardware components.", "app": "SketchUp 2026", "details": "The close-up showed circular and rectangular hardware parts with selected white and blue-highlighted faces."}, {"start_s": 13682.91, "end_s": 13692.834, "action": "Undid or adjusted the prior hardware edit, selected additional components, and moved a hardware assembly away from the door using the Move tool; the assembly remained selected at the end.", "intent": "Separate or reposition door hardware components for editing.", "app": "SketchUp 2026", "details": "A selected hardware piece was visibly displaced to the right of the door, with a distance readout of about 3' 5 1/8\"."}, {"start_s": 13692.834, "end_s": 13702.803, "action": "Dragged the selected door/frame geometry, then orbited and zoomed far out to reveal the detached frame and surrounding building layouts.", "intent": "Reposition the selected geometry and review its location within the larger model.", "app": "SketchUp 2026", "details": "The final view showed a small detached frame at left and two larger building floor-plan structures."}, {"start_s": 13702.803, "end_s": 13714.017, "action": "Scrolled through the SketchUp model, selected a small component, and dragged it across the scene, leaving the move operation active with a distance readout.", "intent": "Position the selected model component within the larger floor-plan scene.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original displayed."}, {"start_s": 13714.017, "end_s": 13724.353, "action": "Navigated around the 3D floor-plan models, zoomed and orbited closer, and ended in an angled view of the interior layout.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible."}, {"start_s": 13724.353, "end_s": 13734.743, "action": "Zoomed into a wood-finished door, selected its geometry, and manipulated the view and selection until the door panel and hardware were shown prominently.", "intent": "Inspect or adjust the selected door component.", "app": "SketchUp 2026", "details": "The door remained highlighted in blue in the later views."}, {"start_s": 13734.743, "end_s": 13744.595, "action": "Clicked and dragged around the selected door hardware while zooming and orbiting, then repositioned the camera to an exterior close-up of the wood door.", "intent": "Inspect the door hardware and surrounding geometry.", "app": "SketchUp 2026", "details": "The view changed from a close-up of the round handle to the door surface and exterior background."}, {"start_s": 13744.595, "end_s": 13754.427, "action": "Orbited and dragged the view around the close-up door handle and lock assembly, ending with the hardware visible against the wood door.", "intent": "Examine the door hardware from another angle.", "app": "SketchUp 2026", "details": "No definite geometry change could be confirmed; the interaction was primarily view manipulation."}, {"start_s": 13754.427, "end_s": 13763.893, "action": "Dragged and clicked around the door lock assembly, zoomed and orbited closer, and ended with a close view of the lock plate and circular opening.", "intent": "Inspect the lock assembly and its placement on the door.", "app": "SketchUp 2026", "details": "The Materials tray remained open throughout."}, {"start_s": 13763.893, "end_s": 13774.097, "action": "Dragged in the SketchUp model while orbiting around a close-up wooden wall fixture and its circular opening.", "intent": "Inspect the fixture from different angles.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original visible."}, {"start_s": 13774.097, "end_s": 13784.328, "action": "Scrolled and dragged to navigate away from the fixture, then returned to a closer view of the wooden wall assembly and clicked around its circular opening.", "intent": "Reposition the camera and inspect the modeled assembly.", "app": "SketchUp 2026", "details": "The view briefly showed the larger building exterior before returning to the wooden assembly."}, {"start_s": 13784.328, "end_s": 13794.005, "action": "Typed a single character, switched to the Eraser tool, and dragged across edges and geometry around the wooden fixture while orbiting the view.", "intent": "Erase or clean up selected model edges and geometry.", "app": "SketchUp 2026", "details": "The fixture appeared increasingly disassembled, with surrounding edges and faces removed."}, {"start_s": 13794.005, "end_s": 13803.947, "action": "Continued dragging with the Eraser tool across the wooden wall and fixture, removing additional visible edges and faces while changing the view.", "intent": "Continue simplifying or cleaning the modeled fixture.", "app": "SketchUp 2026", "details": "The close-up showed fewer remaining fixture elements against the wood-textured wall."}, {"start_s": 13803.947, "end_s": 13813.895, "action": "Dragged the Eraser tool repeatedly across the remaining wall-fixture geometry and removed most of the visible components.", "intent": "Remove remaining unwanted geometry from the assembly.", "app": "SketchUp 2026", "details": "By the end, only a small key-like component and isolated lines remained visible."}, {"start_s": 13813.895, "end_s": 13824.043, "action": "Clicked and dragged to navigate away from the close-up, scrolled through the model, and selected a small brown mechanical-looking component in the wider scene.", "intent": "Review the edited model and select the remaining component.", "app": "SketchUp 2026", "details": "The view ended zoomed out over the building models with the small component highlighted in blue."}, {"start_s": 13824.043, "end_s": 13834.068, "action": "Scrolled and orbited around the SketchUp model, clicking and dragging to adjust the view around a wood-textured door and nearby hardware.", "intent": "Inspect the door assembly from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original selected."}, {"start_s": 13834.068, "end_s": 13843.147, "action": "Scrolled and orbited from the broader building model into a close view of a wood door, then activated a guide-related tool and began positioning a guide near the door.", "intent": "Navigate to and set up a reference on the door.", "app": "SketchUp 2026", "details": "The close view showed a guide indicator and a length readout near the bottom right."}, {"start_s": 13843.147, "end_s": 13855.773, "action": "Scrolled and repositioned the camera around the door assembly, briefly toggled the view with a space keypress, and clicked to continue inspecting the detached door and surrounding model.", "intent": "Review the door placement and surrounding geometry.", "app": "SketchUp 2026", "details": "The view changed from a close doorway view to the detached wood door beside the building."}, {"start_s": 13855.773, "end_s": 13864.975, "action": "Selected and positioned a guide on the detached door, entered 3 feet and 3/4 inch measurements, and continued orbiting and zooming around the door.", "intent": "Place a measured reference guide on the door.", "app": "SketchUp 2026", "details": "The guide tool remained active and the length field displayed entered measurements."}, {"start_s": 13864.975, "end_s": 13875.205, "action": "Clicked to place another guide point on the door, entered a 0.3-inch measurement, and left the guide visible across the wood panel.", "intent": "Add a precise reference measurement to the door.", "app": "SketchUp 2026", "details": "The visible guide length updated to approximately 2 5/8 inches and then remained on the door."}, {"start_s": 13875.205, "end_s": 13884.964, "action": "Repositioned the view around the door edge, entered a 1-inch measurement, and continued placing or adjusting the guide along the wood panel.", "intent": "Refine the door-edge guide measurement.", "app": "SketchUp 2026", "details": "The guide remained visible near the door edge; the length readout showed 1 inch and later approximately 3 1/16 inches."}, {"start_s": 13884.964, "end_s": 13894.553, "action": "Entered 2 inches and navigated around the cherry-wood door panel with repeated middle-button view adjustments, then positioned a guide on the panel.", "intent": "Position and measure the door-panel geometry.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original."}, {"start_s": 13894.553, "end_s": 13906.256, "action": "Undid several guide or measurement actions, adjusted the view, selected a point near the lower door panel, and entered 3 feet 3 3/4 inches.", "intent": "Correct and set a dimensional guide on the door panel.", "app": "SketchUp 2026", "details": "The measurement tooltip later showed approximately 1' 9 7/16\" during guide placement."}, {"start_s": 13906.256, "end_s": 13916.495, "action": "Navigated and zoomed around the door, placed another guide from the left edge across the panel, and entered 2 inches.", "intent": "Add a second measured reference to the door geometry.", "app": "SketchUp 2026", "details": "The guide measurement displayed about 7 5/16\" before the entered value."}, {"start_s": 13916.495, "end_s": 13927.076, "action": "Dragged and adjusted guide or geometry points, switched to the Move tool, and moved the selected door-hardware component while zooming in.", "intent": "Position the door hardware on the panel.", "app": "SketchUp 2026", "details": "A blue-selected hardware component was visible against the wood panel."}, {"start_s": 13927.076, "end_s": 13937.997, "action": "Navigated around the door and hardware with repeated orbit and zoom adjustments, then pulled back to inspect the door within the surrounding model.", "intent": "Inspect the hardware placement and overall door context.", "app": "SketchUp 2026", "details": "The final view showed the detached door panel and the surrounding building model."}, {"start_s": 13937.997, "end_s": 13943.996, "action": "Zoomed back onto the wood door and orbited slightly to inspect the installed latch or knob assembly up close.", "intent": "Review the door-hardware detail.", "app": "SketchUp 2026", "details": "The close-up showed the cylindrical latch/knob assembly on the left side of the door."}, {"start_s": 13943.996, "end_s": 13954.057, "action": "Scrolled and orbited around the cherry-wood door, moving from a wider doorway view to a close-up of the lock hardware.", "intent": "Inspect the modeled door and lock from different angles.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original."}, {"start_s": 13954.057, "end_s": 13964.288, "action": "Continued orbiting and zooming around the door hardware, ending on an extreme close-up of the knob and adjacent components.", "intent": "Examine the door hardware geometry closely.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible."}, {"start_s": 13964.288, "end_s": 13974.152, "action": "Scrolled and orbited away to a wider apartment view, then returned to a front view of the cherry-wood door and hardware.", "intent": "Reorient the camera to review the door in the surrounding model and from the front.", "app": "SketchUp 2026", "details": "Materials tray remained open."}, {"start_s": 13974.152, "end_s": 13984.075, "action": "Selected a guide-related tool, entered a 2-inch value, and dragged on the door surface to create or position guide geometry; then switched to a move-related tool and dragged a small rectangular component.", "intent": "Lay out and reposition door details using measured guide and move operations.", "app": "SketchUp 2026", "details": "The status bar showed Length 2\u201d and later a move distance of approximately 9 13/16\u201d."}, {"start_s": 13984.075, "end_s": 13994.163, "action": "Continued moving the selected door-hardware component with several clicks and drags while orbiting around it, leaving the component selected in blue wireframe.", "intent": "Adjust and inspect the placement of the door hardware component.", "app": "SketchUp 2026", "details": "The selected component appeared enlarged in close-up; move mode remained active."}, {"start_s": 13994.163, "end_s": 14004.68, "action": "Dragged and orbited the selected hardware component, panned around the door, and ended with a side-oriented close-up showing the knob assembly against the door edge.", "intent": "Refine and verify the door hardware position from multiple views.", "app": "SketchUp 2026", "details": "The component remained selected in blue wireframe throughout the final view."}, {"start_s": 14004.68, "end_s": 14014.463, "action": "Navigated around the SketchUp model with repeated orbit/zoom gestures, then selected and inspected the detached wooden door and surrounding house geometry.", "intent": "Inspect the door and its placement relative to the building.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Cherry_Original."}, {"start_s": 14014.463, "end_s": 14024.207, "action": "Zoomed in on the wooden door, selected it, typed a character, and continued orbiting and panning around the model; ended with the door detached in view beside the building.", "intent": "Position or inspect the door component in the 3D scene.", "app": "SketchUp 2026", "details": "The door was visibly selected during part of the span."}, {"start_s": 14024.207, "end_s": 14034.119, "action": "Orbited and zoomed closely around the door hardware and then pulled back to the house; selected the door and opened its context menu.", "intent": "Inspect the door assembly and access object-editing commands.", "app": "SketchUp 2026", "details": "The context menu included Entity Info, Erase, Hide, Lock, Explode, and Make Component."}, {"start_s": 14034.119, "end_s": 14044.319, "action": "Selected the door and moved it through the house while orbiting and zooming, leaving it positioned in a doorway opening.", "intent": "Place the door component into the building layout.", "app": "SketchUp 2026", "details": "The door remained selected with a move operation active; the distance readout changed during placement."}, {"start_s": 14044.319, "end_s": 14053.875, "action": "Orbited and zoomed around the placed door, selected it, and switched to the Scale tool to adjust or inspect its dimensions.", "intent": "Fit or refine the door\u2019s size and placement in the doorway.", "app": "SketchUp 2026", "details": "The door was shown selected with scale grips and the Wood_Cherry_Original material."}, {"start_s": 14053.875, "end_s": 14064.019, "action": "Zoomed and orbited around the selected door, then pulled back to a wide view of the complete building model and site.", "intent": "Review the door placement in the overall model.", "app": "SketchUp 2026", "details": "The final view showed the full house model with the edited door selected."}, {"start_s": 14064.019, "end_s": 14073.862, "action": "Navigated around the SketchUp floor plan with repeated scrolling and selected a wood-textured door; began moving or manipulating the selected door.", "intent": "Position or adjust a door component in the model.", "app": "SketchUp 2026", "details": "Selected door shows the Wood_Cherry_Original material and move-tool state."}, {"start_s": 14073.862, "end_s": 14084.433, "action": "Scrolled and navigated to another area of the floor plan while keeping the wood door selected, then continued positioning the door component.", "intent": "Place or align a copied door in another location.", "app": "SketchUp 2026", "details": "The selected door remains highlighted with the move/copy distance indicator visible."}, {"start_s": 14084.433, "end_s": 14095.051, "action": "Selected the door, entered a scale operation, adjusted its size with drag gestures, and orbited the view to inspect the resized door.", "intent": "Resize and inspect the door component.", "app": "SketchUp 2026", "details": "Scale grips and a yellow selection outline are visible around the door."}, {"start_s": 14095.051, "end_s": 14106.34, "action": "Continued scaling the selected door, entered a scale value of 0.87, then navigated away to review the door in the surrounding floor plan.", "intent": "Finalize the door dimensions and review its placement.", "app": "SketchUp 2026", "details": "The door appears smaller and installed in a wall opening after the scale operation."}, {"start_s": 14106.34, "end_s": 14116.335, "action": "Selected another model element, typed a move-tool shortcut, and navigated and zoomed out while moving a highlighted component across the floor plan.", "intent": "Copy or reposition a model component within the layout.", "app": "SketchUp 2026", "details": "A blue-highlighted component remains attached to the move cursor while the view changes."}, {"start_s": 14116.335, "end_s": 14126.484, "action": "Continued orbiting and scrolling around the floor plan while moving the selected component, ending with it positioned beneath a wall near the dining area.", "intent": "Place the component in the intended location.", "app": "SketchUp 2026", "details": "The selected blue-outlined component is shown under the wall at the end of the span."}, {"start_s": 14126.484, "end_s": 14136.496, "action": "Scrolled and navigated the SketchUp view extensively, bringing the modeled interior and a selected wood-textured door into view.", "intent": "Inspect or reposition the camera around the selected door.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original."}, {"start_s": 14136.496, "end_s": 14146.508, "action": "Typed \u201cs,\u201d then selected the wood-textured door and adjusted it with the Scale tool, changing the view and scale handles around the door.", "intent": "Resize the selected door component.", "app": "SketchUp 2026", "details": "Scale status showed Green Scale 1.21 and later Blue Scale 1.00."}, {"start_s": 14146.508, "end_s": 14156.511, "action": "Orbited and zoomed around the model, moving from a close door view to a broader overhead view of the floor plan.", "intent": "Inspect the door placement within the surrounding floor plan.", "app": "SketchUp 2026", "details": "The camera changed substantially while the Materials tray remained open."}, {"start_s": 14156.511, "end_s": 14168.31, "action": "Zoomed far out and orbited to compare the main floor-plan model with another smaller model above it.", "intent": "Review the overall model layout and spatial arrangement.", "app": "SketchUp 2026", "details": "No clear object edit was visible during the extended navigation."}, {"start_s": 14168.31, "end_s": 14176.388, "action": "Navigated back toward an interior doorway, selected a wood-textured door, and began moving it; the Move tool displayed a distance of about 10 3/16 inches.", "intent": "Reposition the selected door within the interior model.", "app": "SketchUp 2026", "details": "The selected door was outlined in blue and the Move tool remained active."}, {"start_s": 14176.388, "end_s": 14187.263, "action": "Continued zooming and orbiting around the floor plan while carrying the selected door with the Move tool, ending with the door positioned over an interior wall area.", "intent": "Continue positioning the door component in the model.", "app": "SketchUp 2026", "details": "Move-tool status indicated the item was being copied or moved; no final placement confirmation was visible."}, {"start_s": 14187.263, "end_s": 14196.613, "action": "Scrolled and clicked around the selected wood-textured door, then typed briefly and adjusted its view and scale handles, leaving the door selected.", "intent": "Inspect and adjust the selected door component.", "app": "SketchUp 2026", "details": "Materials tray shows Wood_Cherry_Original."}, {"start_s": 14196.613, "end_s": 14206.788, "action": "Dragged and orbited around the selected door, clicked its geometry, and scrolled while changing the viewpoint and scale selection.", "intent": "Refine the door component's placement or dimensions.", "app": "SketchUp 2026", "details": "Selected wood-textured door remained visible with scale handles."}, {"start_s": 14206.788, "end_s": 14216.402, "action": "Orbited and scrolled out to review the floor plan, clicked a door area, typed briefly, and began moving or copying a selected door component.", "intent": "Position or duplicate the door within the model.", "app": "SketchUp 2026", "details": "The view changed from a close-up to an overhead apartment layout."}, {"start_s": 14216.402, "end_s": 14226.618, "action": "Scrolled and orbited over the floor plan, selected a door near the dining table, and initiated rotation and placement adjustments.", "intent": "Rotate and position the door in the room layout.", "app": "SketchUp 2026", "details": "Rotation protractor and selected door were visible near the dining table."}, {"start_s": 14226.618, "end_s": 14236.853, "action": "Completed the rotation adjustment on the selected door, clicked and briefly typed, then continued manipulating the door with the rotate tool before returning to selection.", "intent": "Set the door's orientation and inspect its placement.", "app": "SketchUp 2026", "details": "The selected wood-textured door remained above the dining table area."}, {"start_s": 14236.853, "end_s": 14247.11, "action": "Scrolled and orbited into a close-up of the door, clicked its geometry, and switched between move and scale manipulation, leaving the door selected with scale handles.", "intent": "Fine-tune the door's position or size.", "app": "SketchUp 2026", "details": "Close-up view showed the wood-textured door and green scale grips."}, {"start_s": 14247.11, "end_s": 14256.56, "action": "Navigated around the SketchUp apartment model with zooming and orbiting, selected a wooden door, and applied a scale adjustment; ended with the door selected and the Scale tool active.", "intent": "Adjust the size of a modeled door.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original."}, {"start_s": 14256.56, "end_s": 14266.685, "action": "Continued orbiting and zooming around the selected wooden door, then changed the view to an overhead apartment layout and exited the close-up edit view.", "intent": "Inspect the adjusted door in the surrounding floor plan.", "app": "SketchUp 2026", "details": "The final view showed multiple rooms and doors from above."}, {"start_s": 14266.685, "end_s": 14272.968, "action": "Orbited and zoomed through the apartment model, moving from a room-level view to a wider overhead perspective of the rooms, bathrooms, and furnishings.", "intent": "Review the apartment model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 14272.968, "end_s": 14284.347, "action": "Scrolled to zoom and repositioned the overhead camera across the apartment layout, inspecting rooms, stairs, furniture, and doors without making a visible geometry edit.", "intent": "Survey the overall model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 14284.347, "end_s": 14295.081, "action": "Selected a model element, typed a shortcut, and navigated the view while using move/copy-style manipulation; ended with a small rectangular element highlighted near a room doorway.", "intent": "Position or copy a model component within the apartment.", "app": "SketchUp 2026", "details": "The status bar indicated an item was being placed or copied."}, {"start_s": 14295.081, "end_s": 14305.134, "action": "Zoomed and orbited into a doorway, selected a wooden door, and adjusted its scale; ended with the door highlighted and the Scale tool active.", "intent": "Resize another modeled door.", "app": "SketchUp 2026", "details": "The final status bar showed Green Scale 1.17 and the Materials tray showed Wood_Cherry_Original."}, {"start_s": 14305.134, "end_s": 14314.244, "action": "Adjusted the SketchUp camera around a selected wood-textured door, then zoomed or orbited out to show the broader floor plan.", "intent": "Inspect the door within the model.", "app": "SketchUp", "details": "The Materials tray showed Wood_Cherry_Original."}, {"start_s": 14314.244, "end_s": 14322.913, "action": "Navigated back toward the interior doors with repeated zooming and orbiting, selected a door area, and initiated a move/copy operation.", "intent": "Position or duplicate an interior door component.", "app": "SketchUp", "details": "The final view showed a close-up wood door with the move tool active."}, {"start_s": 14322.913, "end_s": 14332.546, "action": "Continued navigating around the selected door, then initiated scaling and adjusted its size, leaving the door selected near a window.", "intent": "Resize the door component in the model.", "app": "SketchUp", "details": "The scale tool status bar showed a value of 0.70."}, {"start_s": 14332.546, "end_s": 14342.759, "action": "Zoomed and orbited around the selected door, reviewed its placement beside the window, and then deselected it.", "intent": "Review the resized door placement.", "app": "SketchUp", "details": "The final view showed the wood door installed beside a window without selection handles."}, {"start_s": 14342.759, "end_s": 14358.072, "action": "Orbited and zoomed out from the door to review the apartment layout, ending with a wider view of the model.", "intent": "Inspect the overall model after editing the door.", "app": "SketchUp", "details": "The view expanded from the doorway to multiple rooms and floor-plan sections."}, {"start_s": 14358.072, "end_s": 14377.931, "action": "Switched briefly through Windows Explorer and the recorder, returned to SketchUp, and zoomed or orbited to a distant view showing two separate model sections.", "intent": "Resume model inspection after an application switch.", "app": "SketchUp", "details": "The final SketchUp view showed two apartment-like model layouts side by side."}, {"start_s": 14377.931, "end_s": 14387.918, "action": "Orbited and zoomed the SketchUp camera around the furnished floor-plan model, moving from a higher overview to a closer view of rooms and doors.", "intent": "Inspect different areas of the 3D building model.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original selected."}, {"start_s": 14387.918, "end_s": 14398.412, "action": "Continued orbiting and zooming through the floor-plan model, briefly bringing wooden doors and nearby rooms into close view before returning to a broader overhead perspective.", "intent": "Review interior layout details from multiple viewpoints.", "app": "SketchUp 2026", "details": "No visible geometry or material edits were made."}, {"start_s": 14398.412, "end_s": 14403.144, "action": "Orbited and zoomed the camera around the building, shifting from an overhead view to another angled overview of the rooms, stairs, doors, and windows.", "intent": "Continue visual inspection of the model layout.", "app": "SketchUp 2026", "details": "Materials tray remained visible."}, {"start_s": 14403.144, "end_s": 14423.144, "action": "Paused with the SketchUp model displayed in an overhead angled view of the building interior.", "intent": "Review the current model view without interaction.", "app": "SketchUp 2026", "details": null}, {"start_s": 14423.144, "end_s": 14436.748, "action": "Resumed orbiting and zooming the camera, pulling back to show the full floor-plan and a separate upper model, then adjusting the view around the building.", "intent": "Inspect the overall arrangement of the modeled structures.", "app": "SketchUp 2026", "details": "System state changes were recorded before interaction resumed."}, {"start_s": 14436.748, "end_s": 14446.283, "action": "Continued orbiting and zooming around the building interior, ending on a close view of a wall opening, adjacent rooms, and stairs.", "intent": "Examine interior spaces and circulation details.", "app": "SketchUp 2026", "details": "Materials tray remained open; no edits were visible."}, {"start_s": 14446.283, "end_s": 14456.285, "action": "Orbit and zoom around the SketchUp house models, moving the view from an overview toward the interior floor plan and doors.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 14456.285, "end_s": 14467.955, "action": "Zoom closely onto a wood-textured door, select it, and orbit around the selected door and adjacent room geometry.", "intent": "Inspect or prepare the door component for editing.", "app": "SketchUp 2026", "details": "The selected door is outlined in blue."}, {"start_s": 14467.955, "end_s": 14477.916, "action": "Continue viewing the selected door, switch to a scale operation, and adjust its scale so the door and frame become highlighted with scale grips.", "intent": "Resize the door component.", "app": "SketchUp 2026", "details": "The status bar shows an active scale operation with Blue Scale 0.94."}, {"start_s": 14477.916, "end_s": 14487.793, "action": "Orbit and zoom away from the active door scaling view, then return to a broader overhead view of the house interior and door layout.", "intent": "Review the door placement in the surrounding model.", "app": "SketchUp 2026", "details": null}, {"start_s": 14487.793, "end_s": 14496.262, "action": "Navigate to another interior door, select it, and begin moving or copying the selected geometry while zooming in closely.", "intent": "Position or duplicate another door component.", "app": "SketchUp 2026", "details": "The status bar indicates an active copy/place operation."}, {"start_s": 14496.262, "end_s": 14505.963, "action": "Orbit and zoom around the selected door and adjacent wall, then drag a scale handle to resize the highlighted door component.", "intent": "Adjust the dimensions of the door component.", "app": "SketchUp 2026", "details": "The status bar shows the scale tool active with Green Scale 1.17."}, {"start_s": 14505.963, "end_s": 14515.823, "action": "Orbit-scrolled around a selected wood-finished door, then changed the view to show multiple doors and surrounding partition walls.", "intent": "Inspect the door within the 3D model.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Cherry_Original."}, {"start_s": 14515.823, "end_s": 14526.331, "action": "Zoomed and orbited around the selected door, then dragged its scale handles to resize it; the displayed scale changed from about 0.98 to 0.89.", "intent": "Adjust the selected door\u2019s size and placement.", "app": "SketchUp 2026", "details": "The door remained selected with yellow and blue bounds."}, {"start_s": 14526.331, "end_s": 14536.606, "action": "Continued manipulating the selected door with orbiting, clicks, and a scale drag, changing the displayed scale back to 1.00 and leaving the door viewed close-up.", "intent": "Refine the door\u2019s dimensions in the model.", "app": "SketchUp 2026", "details": "The selected wood door and adjacent door remained visible."}, {"start_s": 14536.606, "end_s": 14546.559, "action": "Dragged the selected door\u2019s scale controls, then continued orbiting and scrolling around it; green scale grips appeared while the door stayed selected.", "intent": "Fine-tune the door geometry and inspect the result.", "app": "SketchUp 2026", "details": "The Materials tray continued to show Wood_Cherry_Original."}, {"start_s": 14546.559, "end_s": 14556.612, "action": "Orbited and scrolled away from the close-up door to a wider overhead view of the building interior, showing multiple rooms, walls, and wood doors.", "intent": "Review the door placement in the overall floor-plan model.", "app": "SketchUp 2026", "details": "No new material was applied; the view changed substantially."}, {"start_s": 14556.612, "end_s": 14565.502, "action": "Continued orbiting and zooming through the building, then navigated back toward a selected wood door and clicked near it; typed the letter \u201cm\u201d at the end.", "intent": "Inspect another door and its surrounding placement.", "app": "SketchUp 2026", "details": "The final view showed a wood door selected in a room beside furniture and partitions."}, {"start_s": 14565.502, "end_s": 14574.921, "action": "Scrolled and navigated around the SketchUp house model, then clicked and zoomed toward a selected wood-finished doorway or panel.", "intent": "Inspect and position the view on a specific modeled door or panel.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original."}, {"start_s": 14574.921, "end_s": 14584.274, "action": "Scrolled and orbited around the selected wood door, typed a single \u201cs,\u201d and activated the scale tool so green scale grips appeared around the door assembly.", "intent": "Adjust the selected door or panel geometry.", "app": "SketchUp 2026", "details": "The selected door was shown close up with scale handles."}, {"start_s": 14584.274, "end_s": 14594.615, "action": "Orbited and zoomed around the model, manipulated the selected door with the scale tool, and ended by returning to an overhead room view.", "intent": "Inspect or refine the door placement and then review it in context.", "app": "SketchUp 2026", "details": "The wood door remained selected during part of the view manipulation."}, {"start_s": 14594.615, "end_s": 14604.214, "action": "Orbited and zoomed out through several views of the house interior, reviewing rooms, doors, stairs, and furnishings from overhead angles.", "intent": "Review the modeled layout and door placement across the interior.", "app": "SketchUp 2026", "details": "No definite geometry change was visible; activity primarily changed the camera view."}, {"start_s": 14604.214, "end_s": 14614.264, "action": "Continued orbiting and zooming across the house model, moving from a detached section to a broader overhead view of rooms and bathrooms.", "intent": "Survey the overall model layout from different viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Cherry_Original visible."}, {"start_s": 14614.264, "end_s": 14624.397, "action": "Orbited and zoomed toward another wood-finished door, then clicked repeatedly near its lower edge and hardware area.", "intent": "Inspect or select components of the door and its hardware.", "app": "SketchUp 2026", "details": "The final view was a close-up of the wood door and knob."}, {"start_s": 14624.397, "end_s": 14633.0, "action": "Scrolled and middle-clicked repeatedly to orbit and zoom out from a close room view to show multiple apartment models.", "intent": "Review the overall 3D layout from a wider perspective.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Cherry_Original visible."}, {"start_s": 14633.0, "end_s": 14643.041, "action": "Scrolled and middle-clicked to orbit and zoom around the apartment model, moving from a close interior view to a broader side view.", "intent": "Inspect the building layout from different angles.", "app": "SketchUp 2026", "details": "No geometry edits are visibly confirmed."}, {"start_s": 14643.041, "end_s": 14653.058, "action": "Scrolled and middle-clicked to orbit and zoom through the apartment interior, ending on an elevated view of rooms, doors, and furnishings.", "intent": "Continue reviewing the interior model from alternate viewpoints.", "app": "SketchUp 2026", "details": "The model remained in the main SketchUp viewport."}, {"start_s": 14653.058, "end_s": 14662.519, "action": "Scrolled and middle-clicked to zoom and orbit from an overhead room view, then clicked and dragged in the viewport to adjust the view and selection.", "intent": "Refine the camera position and inspect the floor-plan arrangement.", "app": "SketchUp 2026", "details": "The final view showed most of the apartment plan from above."}, {"start_s": 14662.519, "end_s": 14672.579, "action": "Scrolled and clicked around the overhead model, selecting a brown interior door component and orbiting slightly while keeping it highlighted.", "intent": "Inspect or select a door within the apartment model.", "app": "SketchUp 2026", "details": "The selected door was outlined in blue; Wood_Cherry_Original remained shown in Materials."}, {"start_s": 14672.579, "end_s": 14683.073, "action": "Typed \u201cm\u201d, then clicked and dragged around the selected door while orbiting and zooming; moved the view toward the door and left it prominently displayed.", "intent": "Manipulate or inspect the selected door component.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the brown door with its hardware visible."}, {"start_s": 14683.073, "end_s": 14693.036, "action": "Orbit, pan, zoom, and click around the SketchUp model, changing the view from a close-up of the door and hardware to a wider view of the framed panel.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original selected."}, {"start_s": 14693.036, "end_s": 14702.142, "action": "Zoom and orbit toward the small brown hardware, then select it and adjust the view around the framed panel.", "intent": "Inspect and select the modeled hardware.", "app": "SketchUp 2026", "details": "The hardware was highlighted in blue in the later view."}, {"start_s": 14702.142, "end_s": 14712.049, "action": "Zoom out and reposition the view, then move the selected hardware away from the framed panel before leaving the model in a distant view.", "intent": "Move or reposition the hardware component in the model.", "app": "SketchUp 2026", "details": "The Move tool displayed a distance of about 4 1/8 inches during the drag."}, {"start_s": 14712.049, "end_s": 14721.942, "action": "Orbit and zoom repeatedly around the isolated hardware, bringing its box-and-cylinder construction into close view from multiple angles.", "intent": "Examine the hardware geometry and its surfaces.", "app": "SketchUp 2026", "details": "The close-up showed brown exterior faces and white interior/circular faces."}, {"start_s": 14721.942, "end_s": 14731.227, "action": "Select faces on the hardware, invoke a face adjustment with the Push/Pull tool, and then orbit to the side while applying the Wood_Cherry material to exterior surfaces.", "intent": "Modify the hardware geometry and apply its wood finish.", "app": "SketchUp 2026", "details": "Push/Pull showed an offset limit of about 15/16 inch; the Materials tray remained visible."}, {"start_s": 14731.227, "end_s": 14741.222, "action": "Orbit and zoom around the hardware while using the Paint Bucket tool, clicking several visible faces to refine the applied material and inspect the finished component.", "intent": "Finish and review the hardware's material appearance.", "app": "SketchUp 2026", "details": "The final view showed the brown wood-textured exterior with white interior faces."}, {"start_s": 14741.222, "end_s": 14751.216, "action": "Orbit and zoom around the wood-textured cylindrical-and-box component, using middle-button navigation and dragging to inspect different sides.", "intent": "Inspect the component from multiple angles.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Cherry_Original selected."}, {"start_s": 14751.216, "end_s": 14761.159, "action": "Navigate away from the isolated component to the larger building model, then orbit and zoom until the component appears small beside the structure.", "intent": "Locate the component within the overall model.", "app": "SketchUp 2026", "details": "The view changed from a close-up colored component to a distant building view."}, {"start_s": 14761.159, "end_s": 14771.502, "action": "Move and zoom toward the building fa\u00e7ade, bringing a wood-finished door and adjacent window into close view while navigating the model.", "intent": "Inspect the fa\u00e7ade and position the view for editing.", "app": "SketchUp 2026", "details": "The Move tool was active and the distance readout reached approximately 71' 10 1/4\" before the view ended on the door."}, {"start_s": 14771.502, "end_s": 14781.802, "action": "Create a guide near the wood door and enter a 3' 3/4\" distance, confirming the measurement with Enter.", "intent": "Mark a measured reference on the door area.", "app": "SketchUp 2026", "details": "The guide tool was active; a blue guide and Length field were visible."}, {"start_s": 14781.802, "end_s": 14791.847, "action": "Continue positioning the guide on the door, enter 2\" and confirm it, leaving the close-up door area with the guide visible.", "intent": "Add another measured reference near the door hardware.", "app": "SketchUp 2026", "details": "The selected blue wireframe component remained visible on the wood door."}, {"start_s": 14791.847, "end_s": 14801.883, "action": "Select and move the blue wireframe component across the wood door, repositioning it while zoomed in and leaving it selected.", "intent": "Adjust the component's placement on the door.", "app": "SketchUp 2026", "details": "The final view showed the component selected in blue with a distance readout of 3/4\"."}, {"start_s": 14801.883, "end_s": 14811.96, "action": "Navigated around the SketchUp building model with repeated middle-button orbiting and zooming, then selected a small component near a wood-finished door.", "intent": "Inspect and position the view around a door-side model component.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Cherry_Original displayed."}, {"start_s": 14811.96, "end_s": 14822.193, "action": "Entered a move/copy-related command, orbited and zoomed around the building, and repositioned the view from a close exterior wall to a wider building overview.", "intent": "Adjust the model view while working with the selected component.", "app": "SketchUp 2026", "details": "The status bar indicated that an item was being moved or copied, with a distance shown at the end."}, {"start_s": 14822.193, "end_s": 14832.317, "action": "Orbited and zoomed into a wood-finished door area, bringing a small blue-selected fixture or component into close view.", "intent": "Inspect the selected door-side component closely.", "app": "SketchUp 2026", "details": "The selected component became clearly visible against the wood door beside a window."}, {"start_s": 14832.317, "end_s": 14841.301, "action": "Selected and manipulated the close-up component, typed a distance value of 2 inches and confirmed it, then continued adjusting the view and switched to a guide-related tool.", "intent": "Precisely position or size the selected door-side component.", "app": "SketchUp 2026", "details": "The status bar showed a 2 1/4-inch length during the guide-tool interaction."}, {"start_s": 14841.301, "end_s": 14851.255, "action": "Exited the close-up manipulation, orbited and zoomed out to review the building exterior from multiple angles, and made additional selections near the model.", "intent": "Review the component placement within the overall building model.", "app": "SketchUp 2026", "details": "The final view showed the multi-room building facade with wood doors and windows."}, {"start_s": 14851.255, "end_s": 14861.504, "action": "Orbited and zoomed around the SketchUp scene, moving from the full building and a neighboring structure to a closer frontal view of the main building facade.", "intent": "Inspect the completed model from broader and closer viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray remained open and the final view centered on the building's exterior walls and window."}, {"start_s": 14861.504, "end_s": 14871.393, "action": "Orbit-zoomed and panned around the SketchUp building model, moving from a close view of doors and walls to a wider view of the floor plan.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Cherry_Original visible."}, {"start_s": 14871.393, "end_s": 14881.597, "action": "Navigated around the exterior model with orbit and zoom gestures, briefly focusing on a wood door and adjacent window before moving to a side wall.", "intent": "Review exterior doors, windows, and wall geometry.", "app": "SketchUp 2026", "details": "A brief text entry of 'm' occurred during navigation; no clear model change was visible."}, {"start_s": 14881.597, "end_s": 14890.727, "action": "Zoomed and orbited around a selected wood door, then moved to a wider exterior view and selected another door or fixture.", "intent": "Inspect and select exterior model components.", "app": "SketchUp 2026", "details": "The selected door was outlined in blue; brief keyboard inputs and clicks occurred without a clearly identifiable edit."}, {"start_s": 14890.727, "end_s": 14901.348, "action": "Navigated to a wider facade view, selected a small model component, and activated Move and then Rotate tools on the selected object.", "intent": "Position or adjust a selected component in the model.", "app": "SketchUp 2026", "details": "The selected component displayed blue bounds and rotation controls; no completed placement is clearly visible."}, {"start_s": 14901.348, "end_s": 14910.443, "action": "Continued manipulating the selected component with tool clicks and view navigation, then activated Rotate and adjusted the rotation handle.", "intent": "Rotate or reposition the selected model component.", "app": "SketchUp 2026", "details": "The component remained selected with a rotation gizmo; the visible angle reached 83.0 degrees."}, {"start_s": 14910.443, "end_s": 14920.638, "action": "Adjusted the selected component's rotation further, changing the visible angle from about 100.7 degrees, then zoomed or orbited away while keeping the component selected.", "intent": "Continue rotating and reviewing the selected component.", "app": "SketchUp 2026", "details": "The final view showed the selected component small in the scene with rotation controls no longer prominent."}, {"start_s": 14920.638, "end_s": 14929.911, "action": "Scrolled and clicked around the SketchUp model, then selected and manipulated the small brown component near the doorway, ending with it displaced onto the floor area.", "intent": "Adjust the placement of a small model component near the door.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Cherry_Original visible."}, {"start_s": 14929.911, "end_s": 14936.721, "action": "Activated the Rotate tool and selected the small brown component on the floor, displaying the rotation protractor around it.", "intent": "Prepare the component for rotational adjustment.", "app": "SketchUp 2026", "details": "The model view remained focused on the doorway and floor."}, {"start_s": 14936.721, "end_s": 14946.938, "action": "Pressed a key and scrolled while leaving the brown component visible on the floor; no clear geometric change was established.", "intent": "Continue reviewing or positioning the selected model component.", "app": "SketchUp 2026", "details": "The Rotate tool remained active in the SketchUp viewport."}, {"start_s": 14946.938, "end_s": 14957.137, "action": "Selected the brown component, zoomed closer, and manipulated it with the Rotate tool, then left it visibly rotated on the floor.", "intent": "Rotate the component to adjust its orientation.", "app": "SketchUp 2026", "details": "The component was shown enlarged near the doorway and wall corner."}, {"start_s": 14957.137, "end_s": 14967.503, "action": "Navigated the camera around the model, moved the selected component toward the door area, and switched to the Tape Measure tool near the door.", "intent": "Position the component and begin measuring the doorway area.", "app": "SketchUp 2026", "details": "The viewport changed from a wider exterior view back to a close view of the wooden door."}, {"start_s": 14967.503, "end_s": 14978.157, "action": "Entered measurement values of 3 feet 3/4 inch and 2 inches, then placed a guide on the wooden door; the displayed guide measurement reached approximately 4 9/16 inches.", "intent": "Measure and mark reference distances on the door.", "app": "SketchUp 2026", "details": "Tape Measure was active, with dashed guide lines and a measurement label visible on the door."}, {"start_s": 14978.157, "end_s": 14987.871, "action": "Navigated around the SketchUp model with repeated orbit/zoom inputs, selected a small door-hardware-like component, and repositioned the view from a close-up door to a wider building view.", "intent": "Inspect and adjust the placement or view of a model component near a door.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original; the selected component remained visible during navigation."}, {"start_s": 14987.871, "end_s": 14997.912, "action": "Continued orbiting and zooming around the building, copied or moved the selected small component near a door, and ended on a wider exterior view of multiple units.", "intent": "Place or inspect repeated door hardware in the architectural model.", "app": "SketchUp 2026", "details": "Status text indicated copy placement, and the component was visible selected near a door before the wider view."}, {"start_s": 14997.912, "end_s": 15007.864, "action": "Zoomed into a door and adjacent window, switched to a drawing/guide tool, clicked near the door edge, and entered a distance of 2\" followed by Enter.", "intent": "Create or position a guide/reference at a measured offset on the door area.", "app": "SketchUp 2026", "details": "The guide tool status showed a length of approximately 3 7/16\" after the measured entry."}, {"start_s": 15007.864, "end_s": 15017.629, "action": "Navigated back to the selected component on the door, initiated a copy, and then orbited and zoomed out to review the component and the surrounding building fa\u00e7ade.", "intent": "Copy or place the door component and inspect its location in the model.", "app": "SketchUp 2026", "details": "The selected component appeared in close-up first and the final view showed the broader building exterior."}, {"start_s": 15017.629, "end_s": 15027.591, "action": "Orbited and zoomed toward another door and window, selected the small component, and moved or copied it to a new position beside the door.", "intent": "Replicate or reposition the door component on another unit.", "app": "SketchUp 2026", "details": "The component remained highlighted in blue beside the wood-finished door; the span ended during another drag operation."}, {"start_s": 15027.591, "end_s": 15037.626, "action": "Opened the View menu area, selected the orbit tool, and dragged to orbit around the architectural model, ending with a wider elevated view of two building sections.", "intent": "Review the overall model from different viewpoints.", "app": "SketchUp 2026", "details": "The Orbit tool was active in the final screenshots; system configuration notifications briefly appeared during navigation."}, {"start_s": 15037.626, "end_s": 15047.608, "action": "Orbited and zoomed through the SketchUp apartment model, moving from an exterior perspective into a closer overhead view of the rooms and furnishings.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": "Materials tray remained open with Wood_Cherry_Original selected."}, {"start_s": 15047.608, "end_s": 15056.468, "action": "Zoomed out and orbited around the apartment model, briefly revealing the neighboring model and then returning to a frontal exterior view.", "intent": "Review the overall building layout and surrounding model context.", "app": "SketchUp", "details": "No geometry or material changes were visible."}, {"start_s": 15056.468, "end_s": 15065.743, "action": "Zoomed farther out and orbited around the apartment, changing from a front view to an angled view that showed the full building and adjacent structure.", "intent": "Compare the model from broader exterior angles.", "app": "SketchUp", "details": "Materials tray remained visible."}, {"start_s": 15065.743, "end_s": 15080.128, "action": "Continued orbiting and adjusting the view around the apartment model, settling on a closer front-right exterior perspective.", "intent": "Inspect the exterior arrangement from another angle.", "app": "SketchUp", "details": "The model appearance remained unchanged."}, {"start_s": 15080.128, "end_s": 15090.57, "action": "Orbited and zoomed into the apartment from above, revealing interior rooms, a bathroom, dining area, stairs, and furnishings.", "intent": "Inspect the interior layout and room details.", "app": "SketchUp", "details": "No edits to model geometry were apparent."}, {"start_s": 15090.57, "end_s": 15100.362, "action": "Zoomed out to show the apartment alongside another model, then orbited and zoomed back toward the apartment\u2019s interior and stair area.", "intent": "Review the model\u2019s overall placement and interior details from multiple views.", "app": "SketchUp", "details": "Materials tray continued to display Wood_Cherry_Original."}, {"start_s": 15100.362, "end_s": 15110.418, "action": "Orbited and zoomed out around the SketchUp house model, revealing the full floor plan and a second building model while leaving the Materials tray open.", "intent": "Inspect the overall 3D building layout from different viewpoints.", "app": "SketchUp 2026", "details": "Materials panel showed Wood_Cherry_Original."}, {"start_s": 15110.418, "end_s": 15118.924, "action": "Continued orbiting and zooming around the two building models, moving from a wide view to a closer elevated view of the main structure.", "intent": "Review the building arrangement and interior room layout.", "app": "SketchUp 2026", "details": "No visible material or geometry edit was completed."}, {"start_s": 15118.924, "end_s": 15129.607, "action": "Adjusted the camera through repeated orbit and zoom actions, then clicked a brown interior door so it became selected and highlighted in blue.", "intent": "Inspect and select a specific door in the model.", "app": "SketchUp 2026", "details": "The selected door was shown in close-up at the end of the span."}, {"start_s": 15129.607, "end_s": 15141.261, "action": "Typed \u201cm,\u201d manipulated the selected door with a drag, and continued navigating around it; the Move tool remained active with a distance readout while the door geometry was repositioned or prepared for placement.", "intent": "Move or adjust the selected door component in the building model.", "app": "SketchUp 2026", "details": "The Move tool status indicated placement of copied or moved items."}, {"start_s": 15141.261, "end_s": 15152.624, "action": "Orbited and zoomed around the exterior and interior doorway area, then dragged near the lower part of the model and left the view focused on the front room and adjacent doorway.", "intent": "Inspect the result and position of the doorway adjustment.", "app": "SketchUp 2026", "details": "The Materials tray remained open and no material change was visible."}, {"start_s": 15152.624, "end_s": 15162.139, "action": "Orbited and zoomed to another section of the house, then clicked a brown door near a dining area, leaving that door selected and highlighted in blue.", "intent": "Inspect and select another door component in the model.", "app": "SketchUp 2026", "details": "The final view showed the selected door beside a dining table and adjacent rooms."}, {"start_s": 15162.139, "end_s": 15172.012, "action": "Selected and manipulated a wood door component, then orbited and adjusted the SketchUp view around the apartment model.", "intent": "Position or inspect the door component within the architectural model.", "app": "SketchUp 2026", "details": "Materials tray showed Wood_Cherry_Original; the door remained selected while the camera view changed."}, {"start_s": 15172.012, "end_s": 15181.39, "action": "Clicked the selected door and orbited the model, changing the view from a wider apartment view to a close-up perspective beside the building.", "intent": "Inspect the door component and its placement relative to the building.", "app": "SketchUp 2026", "details": "The door stayed selected with rotation controls visible."}, {"start_s": 15181.39, "end_s": 15192.619, "action": "Entered 90 and confirmed it, then orbited and adjusted the camera around the model, leaving the door visible from an angled view.", "intent": "Rotate or reorient the door component and inspect the result.", "app": "SketchUp 2026", "details": "The selected door appeared edge-on in one view and broadside in a later orbit view."}, {"start_s": 15192.619, "end_s": 15203.037, "action": "Orbited and zoomed through the apartment model, then selected geometry near an upper wall or room area and typed m.", "intent": "Navigate to and inspect another portion of the model.", "app": "SketchUp 2026", "details": "The view moved across bedrooms and interior walls while the Materials tray remained open."}, {"start_s": 15203.037, "end_s": 15214.356, "action": "Navigated closer to the apartment interior, selected a wall or door-area component, and adjusted the view until the wood door was visible above the building.", "intent": "Inspect or position the wood door component relative to the building.", "app": "SketchUp 2026", "details": "The selected component and door were shown against the apartment model; the Move tool status was visible."}, {"start_s": 15214.356, "end_s": 15224.439, "action": "Selected the wood door, zoomed in, and dragged it with the active transform tool, leaving the door selected with a scale bounding box and green scale value visible.", "intent": "Resize or adjust the door component in the model.", "app": "SketchUp 2026", "details": "The final view showed the full wood door selected beside a window, with Green Scale 0.72 displayed."}, {"start_s": 15224.439, "end_s": 15234.464, "action": "Navigated around the SketchUp model by orbiting and zooming, moving from a close view of a wood-textured door to an overview of two floor-plan structures.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Cherry_Original."}, {"start_s": 15234.464, "end_s": 15238.847, "action": "Zoomed and orbited into the upper rooms of the building, bringing doors, windows, walls, and bathroom fixtures into closer view.", "intent": "Examine interior model details.", "app": "SketchUp 2026", "details": "No model edits are visibly confirmed."}, {"start_s": 15238.847, "end_s": 15250.407, "action": "Continued orbiting and zooming through the building, briefly focusing on a wood-textured door and nearby window before zooming back to a wider building view.", "intent": "Review the building layout and door placement from multiple angles.", "app": "SketchUp 2026", "details": "Used navigation gestures only; no confirmed geometry change."}, {"start_s": 15250.407, "end_s": 15260.562, "action": "Orbited and zoomed across the central rooms and hallways, inspecting multiple brown doors, partitions, windows, and stair areas.", "intent": "Inspect interior layout and architectural components.", "app": "SketchUp 2026", "details": "The model remained in SketchUp with the materials tray open."}, {"start_s": 15260.562, "end_s": 15270.582, "action": "Navigated around the model and entered a move operation on a selected wood-textured door, leaving the door displaced toward the right side of the view.", "intent": "Position or adjust the selected door component.", "app": "SketchUp 2026", "details": "A move tool state and distance readout were visible; the exact placement change is not fully confirmed."}, {"start_s": 15270.582, "end_s": 15281.056, "action": "Continued navigating around the selected door, then switched to scaling and displayed green scale handles around the wood-textured door.", "intent": "Adjust the selected door's size or placement.", "app": "SketchUp 2026", "details": "The final view showed the door selected with scale handles and a green scale readout of approximately 0.71."}, {"start_s": 15281.056, "end_s": 15290.141, "action": "Navigated around the SketchUp model with repeated orbit/zoom gestures and clicks, then hid or minimized the application window near the end.", "intent": "Inspect the 3D building model from different views.", "app": "SketchUp 2026", "details": "The view changed from a close interior view to a distant overview of multiple building sections."}, {"start_s": 15290.141, "end_s": 15300.754, "action": "Continued orbiting and zooming through the SketchUp model, moving from an overview of two building sections to a close exterior view of a door and window.", "intent": "Examine exterior model details from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 15300.754, "end_s": 15310.356, "action": "Entered a short command, selected and manipulated model content, and navigated through several zoomed views; the view ended on a close exterior wall with a door and window.", "intent": "Adjust or inspect selected model components.", "app": "SketchUp 2026", "details": "A copy/move-style tool state and a distance readout were visible during part of the span."}, {"start_s": 15310.356, "end_s": 15320.5, "action": "Orbited and zoomed around the model, selected a small detached object, and activated the Rotate tool on it.", "intent": "Reorient a selected model component.", "app": "SketchUp 2026", "details": "The selected object appeared isolated below the building, with the rotation protractor visible at the end."}, {"start_s": 15320.5, "end_s": 15330.664, "action": "Rotated the selected small object through additional drag gestures and angle entry, changing its orientation while navigating the surrounding model view.", "intent": "Set the orientation of the selected component.", "app": "SketchUp 2026", "details": "The Rotate tool displayed an angle of 60.0 degrees during the span."}, {"start_s": 15330.664, "end_s": 15340.735, "action": "Continued rotating and repositioning the selected small object with drag gestures, then switched back to selection and navigated the view; entered a short command near the end.", "intent": "Finish adjusting and inspect the selected component.", "app": "SketchUp 2026", "details": "The selected object remained isolated below the building, and the Rotate tool was active before returning to selection."}, {"start_s": 15340.735, "end_s": 15348.401, "action": "Navigated around the SketchUp model with repeated scrolling and clicks, then selected the wooden door and activated a measurement or guide operation.", "intent": "Inspect and prepare the door geometry for dimensioning.", "app": "SketchUp 2026", "details": "The door became highlighted with blue edges and measurement handles."}, {"start_s": 15348.401, "end_s": 15358.203, "action": "Entered 3'3/4\" and confirmed it, then entered 2' while placing or adjusting a guide on the selected door.", "intent": "Set dimensional guide distances for the door.", "app": "SketchUp 2026", "details": "The Length field visibly showed 3'3/4\" before the second distance entry."}, {"start_s": 15358.203, "end_s": 15369.26, "action": "Zoomed and orbited away from the door, then selected and began moving a small grouped model element in the wider scene.", "intent": "Reposition or inspect model components.", "app": "SketchUp 2026", "details": "The view changed from the door close-up to a distant selected brown-and-white assembly."}, {"start_s": 15369.26, "end_s": 15379.424, "action": "Clicked and scrolled repeatedly around the door, zooming into its surface and adjusting the view or selection state.", "intent": "Inspect the door geometry closely.", "app": "SketchUp 2026", "details": "The view ended on a close-up of the wooden door without the earlier blue selection outline."}, {"start_s": 15379.424, "end_s": 15389.396, "action": "Continued clicking, dragging, and scrolling to zoom out and reposition the camera, briefly revealing the door within the surrounding room layout before moving farther away.", "intent": "Review the door in the broader architectural model.", "app": "SketchUp 2026", "details": "The model became very small in the workspace by the end of the span."}, {"start_s": 15389.396, "end_s": 15399.32, "action": "Orbited and zoomed back toward the door, then manipulated a small selected component on its surface with the Move tool.", "intent": "Position a door-related component on the modeled door.", "app": "SketchUp 2026", "details": "A small box-like component remained selected in blue on the wooden door."}, {"start_s": 15399.32, "end_s": 15408.987, "action": "Navigated around the SketchUp model with middle-button orbiting and scrolling, then returned to a wider view showing two building layouts.", "intent": "Inspect the overall 3D model and change the camera view.", "app": "SketchUp", "details": null}, {"start_s": 15408.987, "end_s": 15419.248, "action": "Orbited and zoomed toward the larger building, then selected a door-area object and entered the character \u201cm\u201d.", "intent": "Inspect and interact with a door-area component in the model.", "app": "SketchUp", "details": "The view moved from the full building layout to a close-up of a wooden door with a blue-highlighted component."}, {"start_s": 15419.248, "end_s": 15429.99, "action": "Moved and orbited around the model, activated a copy-style operation, and positioned the view back toward the two building layouts.", "intent": "Manipulate or position a model component while inspecting the building arrangement.", "app": "SketchUp", "details": "The copy tool status and distance readout were visible during the operation."}, {"start_s": 15429.99, "end_s": 15440.089, "action": "Selected the door-area component, entered spacing input including \u201c2\u201d and confirmed it, then zoomed in and placed a guide near the wooden door.", "intent": "Set a measurement or placement for the door-area component and create a guide.", "app": "SketchUp", "details": "A guide measurement of approximately 3 13/16 inches was visible beside the door."}, {"start_s": 15440.089, "end_s": 15449.801, "action": "Entered additional movement input, selected and repositioned the door-area component, then orbited around the building exterior to inspect the result.", "intent": "Adjust the door-area component and review its placement from multiple angles.", "app": "SketchUp", "details": "The camera changed from a front exterior view to an angled view of the building fa\u00e7ade and rooms."}, {"start_s": 15449.801, "end_s": 15460.052, "action": "Continued orbiting and zooming out, transitioning from close exterior views to an elevated overview of both building layouts.", "intent": "Review the overall model after the preceding component adjustment.", "app": "SketchUp", "details": "The final view showed both building models separated in the workspace."}, {"start_s": 15460.052, "end_s": 15470.662, "action": "Orbit the SketchUp camera around the multi-room 3D building model, changing from a close overhead view to a wider angled view that reveals a second model.", "intent": "Inspect the overall 3D model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 15470.662, "end_s": 15480.562, "action": "Continue orbiting and zooming the SketchUp view around both building models, ending on a wider elevated perspective with the two layouts separated on screen.", "intent": "Review the relationship and layout of the modeled structures.", "app": "SketchUp 2026", "details": null}, {"start_s": 15480.562, "end_s": 15491.07, "action": "Zoom and orbit into the building interior, then click and drag across the stair area to select stair components; leave a stair flight highlighted in blue.", "intent": "Inspect and select the staircase geometry.", "app": "SketchUp 2026", "details": "The final view focuses on the stairwell beside brown doors and adjacent walls."}, {"start_s": 15491.07, "end_s": 15500.946, "action": "Orbit and zoom around the selected stairwell, clicking successive stair elements and extending the visible blue selection across the stair flight and upper landing.", "intent": "Refine or inspect the staircase selection in the 3D model.", "app": "SketchUp 2026", "details": "The staircase remains highlighted while the camera shifts to a higher close-up view."}, {"start_s": 15500.946, "end_s": 15510.816, "action": "Continue selecting and dragging stair geometry, then zoom far out to show both building models; leave a copied or selected stair assembly outlined in blue away from the main model.", "intent": "Copy or reposition the staircase assembly for inspection or editing.", "app": "SketchUp 2026", "details": "A single 'm' keypress occurred during the stair editing sequence, but no confirmed command result is visible."}, {"start_s": 15510.816, "end_s": 15521.517, "action": "Orbit and zoom around the two building models and the detached blue stair assembly, then switch focus within SketchUp and resize the application window.", "intent": "Review the detached stair geometry and overall model scene.", "app": "SketchUp 2026", "details": "The span ends with a SketchUp application/window transition and a wider view showing both models and the blue stair assembly."}, {"start_s": 15521.517, "end_s": 15531.324, "action": "Switched to SketchUp, resized or repositioned the window, then orbited and zoomed around the 3D building models and nearby stair-like components.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 15531.324, "end_s": 15541.48, "action": "Continued orbiting and zooming through the building model, moving from an overall view toward interior rooms and a central stair area.", "intent": "Examine interior geometry and stairs closely.", "app": "SketchUp", "details": null}, {"start_s": 15541.48, "end_s": 15551.062, "action": "Navigated to a close-up of the stair landing, activated a drawing tool, and clicked around the stair and landing edges to begin or adjust geometry.", "intent": "Work on geometry around the stair landing.", "app": "SketchUp", "details": null}, {"start_s": 15551.062, "end_s": 15561.666, "action": "Used drawing and selection clicks around the stair landing, briefly opened a context menu, and left a small face or edge selected while entering tool shortcuts.", "intent": "Refine or inspect a small stair-area element.", "app": "SketchUp", "details": null}, {"start_s": 15561.666, "end_s": 15572.169, "action": "Selected a small face, activated Push/Pull, entered a 10-foot distance, and extruded the face into a tall narrow 3D element; then orbited to inspect the result.", "intent": "Create or extend a vertical architectural element from the selected face.", "app": "SketchUp", "details": "Push/Pull distance shown as 10'."}, {"start_s": 15572.169, "end_s": 15582.423, "action": "Continued orbiting and zooming around the newly extruded element, clicked adjacent faces, and adjusted the Push/Pull operation while inspecting the resulting wall-like geometry.", "intent": "Inspect and further shape the extruded element.", "app": "SketchUp", "details": null}, {"start_s": 15582.423, "end_s": 15593.121, "action": "Navigated around the SketchUp model with repeated middle-clicks and scrolls, then used Push/Pull on a selected vertical face, changing the displayed distance from about 1 3/4 inches to about 7 1/4 inches.", "intent": "Adjust the height or depth of a modeled face.", "app": "SketchUp", "details": "The Push/Pull tool remained active and the selected wall-like face visibly changed."}, {"start_s": 15593.121, "end_s": 15602.627, "action": "Clicked and navigated around adjacent model faces, then used Push/Pull on a broad selected face, with the distance display reaching 5 inches before continuing to another wall edge.", "intent": "Modify adjoining architectural surfaces in the 3D model.", "app": "SketchUp", "details": "The view changed from a close-up broad face to a corner with vertical wall elements."}, {"start_s": 15602.627, "end_s": 15612.579, "action": "Selected several wall and floor areas, navigated with scrolls, and dragged across model geometry while continuing Push/Pull edits on narrow vertical faces.", "intent": "Refine the dimensions and placement of interior wall geometry.", "app": "SketchUp", "details": "The close-up view showed a narrow wall strip and changing distance values around 6 inches."}, {"start_s": 15612.579, "end_s": 15630.776, "action": "Navigated out to the larger floor-plan model, selected a separate stair-like object, opened its context menu, and chose Make Component, bringing up the component-creation workflow.", "intent": "Convert the selected stair-like geometry into a reusable SketchUp component.", "app": "SketchUp", "details": "The context menu visibly included Make Component, and the span ended with the Create Component window active."}, {"start_s": 15630.776, "end_s": 15641.393, "action": "Returned to the main SketchUp model, selected and dragged the stair component, and zoomed toward it until the stair geometry was highlighted in blue.", "intent": "Position or inspect the newly created stair component within the model.", "app": "SketchUp", "details": "The selected stair assembly was isolated above the floor plan and later shown in close-up with Move active."}, {"start_s": 15641.393, "end_s": 15651.735, "action": "Orbited and zoomed around the highlighted stair assembly, then clicked to continue moving or place it near the surrounding walls and floor opening.", "intent": "Align the stair component with the building geometry.", "app": "SketchUp", "details": "The stair remained selected in blue, and the status bar indicated Move mode with a distance of roughly 32 feet."}, {"start_s": 15651.735, "end_s": 15661.787, "action": "Navigated around the stair model with orbit and zoom gestures, then selected visible stair geometry.", "intent": "Inspect and select stair components in the 3D model.", "app": "SketchUp 2026", "details": "The view changed from a close stair view to a selected, blue-outlined stair assembly."}, {"start_s": 15661.787, "end_s": 15671.4, "action": "Moved and zoomed the camera away from the close stair view, briefly manipulating the model, and ended on an overhead view of the house interior and staircases.", "intent": "Review the stair layout in the broader building model.", "app": "SketchUp 2026", "details": "The final view shows multiple stair flights, rooms, doors, and a dining area."}, {"start_s": 15671.4, "end_s": 15681.537, "action": "Orbited and zoomed around the upper-floor stair and adjacent kitchen area, changing from an overhead view to closer angled views of the stair flight and surrounding walls.", "intent": "Inspect the stair geometry and its surrounding interior.", "app": "SketchUp 2026", "details": "No clearly supported geometry edit is visible; the activity is primarily camera navigation."}, {"start_s": 15681.537, "end_s": 15691.428, "action": "Navigated closer to the stair landing, then clicked and dragged on a stair or landing face while typing short inputs; the view ended in a close-up of a stair edge and wall junction.", "intent": "Begin manipulating or inspecting a specific stair face or edge.", "app": "SketchUp 2026", "details": "The final close-up shows construction axes and a selected/active stair-area face."}, {"start_s": 15691.428, "end_s": 15701.559, "action": "Continued close-up manipulation of the stair geometry with clicks, drags, and zooming, then activated Push/Pull on a large white face and adjusted it; the view ended on the face near a wall.", "intent": "Modify the depth or position of a stair/landing face using Push/Pull.", "app": "SketchUp 2026", "details": "Push/Pull mode is visible with a distance of approximately 6 inches during the span."}, {"start_s": 15701.559, "end_s": 15711.515, "action": "Continued editing the large selected face with clicks, drags, and Push/Pull adjustments, then zoomed and repositioned the camera around its edge.", "intent": "Refine the stair or landing extrusion and inspect the resulting geometry.", "app": "SketchUp 2026", "details": "Push/Pull remains active; the final displayed distance is approximately 4 1/16 inches."}, {"start_s": 15711.515, "end_s": 15721.476, "action": "Orbit and zoom around the modeled staircase and adjacent walls, then switch back to the Select tool while repositioning the camera.", "intent": "Inspect the staircase geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 15721.476, "end_s": 15733.825, "action": "Orbit and zoom extensively around the model, moving from a close wall view to a more distant view while keeping the Orbit tool active.", "intent": "Navigate the 3D scene to inspect the building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 15733.825, "end_s": 15745.688, "action": "Continue orbiting and zooming out to reveal the broader building layout, then zoom back toward the staircase.", "intent": "Review the overall model and return focus to the stair area.", "app": "SketchUp 2026", "details": null}, {"start_s": 15745.688, "end_s": 15756.212, "action": "Orbit and zoom along the staircase, then select the Push/Pull tool and click or drag on stair faces; type brief keys while working on the selected geometry.", "intent": "Edit or inspect stair faces using Push/Pull.", "app": "SketchUp 2026", "details": "The Push/Pull tool is active at the end, with the distance field showing 0 inches."}, {"start_s": 15756.212, "end_s": 15765.013, "action": "Orbit and zoom around the staircase from close and angled views, briefly issue a keyboard command, and continue repositioning the camera.", "intent": "Inspect the stair geometry after the preceding tool interaction.", "app": "SketchUp 2026", "details": null}, {"start_s": 15765.013, "end_s": 15774.968, "action": "Orbit and zoom out from the staircase to show both separated building sections, then make additional camera adjustments and leave the model in a distant overview.", "intent": "Review the overall arrangement of the modeled building sections.", "app": "SketchUp 2026", "details": null}, {"start_s": 15774.968, "end_s": 15786.185, "action": "Scrolled and orbited around the SketchUp model, moving from a wide view of two floor layouts to a close-up of the staircase.", "intent": "Inspect the model and reposition the 3D view.", "app": "SketchUp 2026", "details": "Repeated middle-button navigation and undo-like key presses were used; the view ended focused on stair treads."}, {"start_s": 15786.185, "end_s": 15794.945, "action": "Orbited and zoomed around the stair and adjacent wall, switched to the Orbit tool, and selected the Push/Pull tool while bringing a large face into close view.", "intent": "Navigate to and prepare to edit a model face.", "app": "SketchUp 2026", "details": "A single 'p' key press and subsequent tool selection are visible in the interaction sequence."}, {"start_s": 15794.945, "end_s": 15804.993, "action": "Used Push/Pull on the close-up wall or stair geometry, adjusting the view and then zooming far out to show both floor layouts.", "intent": "Modify or inspect the selected architectural face.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active and the distance readout changed during the span."}, {"start_s": 15804.993, "end_s": 15814.687, "action": "Selected and orbited around the upper floor model, then navigated back to a close-up of the staircase and adjacent wall faces.", "intent": "Inspect different portions of the architectural model.", "app": "SketchUp 2026", "details": "Extensive middle-button orbiting and scrolling changed between wide building views and close stair views."}, {"start_s": 15814.687, "end_s": 15824.372, "action": "Continued using Push/Pull and view navigation on the stair and nearby wall geometry, ending with a view of the stair beside a vertical wall and landing.", "intent": "Continue editing or inspecting the stair assembly.", "app": "SketchUp 2026", "details": "The Push/Pull cursor and tool state remained visible while the camera was repositioned."}, {"start_s": 15824.372, "end_s": 15834.174, "action": "Orbited and zoomed around the stair landing and wall, clicked the geometry repeatedly, and continued Push/Pull interactions before ending on a close-up of the wall edge and landing.", "intent": "Refine or inspect the stair and wall geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active with a 0-inch distance shown at one point; later middle-button orbiting changed the final view."}, {"start_s": 15834.174, "end_s": 15844.194, "action": "Activated Push/Pull, clicked and adjusted faces, and entered small distance values while moving around the wall and opening geometry.", "intent": "Modify the thickness or extrusion of selected architectural faces.", "app": "SketchUp 2026", "details": "The model view remained zoomed into wall and opening edges; the Push/Pull distance field showed changing values."}, {"start_s": 15844.194, "end_s": 15854.112, "action": "Navigated around the model with orbit and scroll gestures, then repositioned the view from an overhead house view toward the staircase.", "intent": "Inspect and position the model for continued editing.", "app": "SketchUp 2026", "details": "The view changed from a room layout with stairs to a close-up of stair geometry."}, {"start_s": 15854.112, "end_s": 15864.132, "action": "Orbited and zoomed around a narrow wall edge, clicked faces, and made brief drag adjustments with Push/Pull active.", "intent": "Adjust a selected wall or edge face in the architectural model.", "app": "SketchUp 2026", "details": "The camera moved from the stair area to a tight view of a vertical wall edge; the distance readout reached 0 before changing."}, {"start_s": 15864.132, "end_s": 15874.694, "action": "Continued orbiting and zooming around adjacent wall faces, selected a large white face, and adjusted it with Push/Pull.", "intent": "Modify and inspect the selected architectural surface.", "app": "SketchUp 2026", "details": "The view ended on a broad white face beside dark wall geometry, with the Push/Pull tool active."}, {"start_s": 15874.694, "end_s": 15884.6, "action": "Selected and adjusted another large face, then orbited and zoomed toward the adjoining wall and opening while continuing Push/Pull edits.", "intent": "Continue shaping connected architectural faces.", "app": "SketchUp 2026", "details": "The camera shifted across the large white surface and adjacent wall junctions; the Push/Pull cursor remained visible."}, {"start_s": 15884.6, "end_s": 15894.958, "action": "Clicked and dragged along the edge of a large white face, entered another Push/Pull adjustment, and orbited slightly to inspect the resulting wall and floor junction.", "intent": "Refine the thickness or position of the selected architectural face.", "app": "SketchUp 2026", "details": "The final view showed the large white face, surrounding gray wall surfaces, and the active Push/Pull distance readout."}, {"start_s": 15894.958, "end_s": 15905.58, "action": "Navigated around the SketchUp model with orbiting and scrolling, then selected the orbit tool and changed the camera view to inspect the corner geometry.", "intent": "Inspect and reposition the 3D view around the modeled corner.", "app": "SketchUp", "details": null}, {"start_s": 15905.58, "end_s": 15916.27, "action": "Selected the Push/Pull tool, clicked model faces, and adjusted a face distance while orbiting and scrolling around the corner.", "intent": "Modify the thickness or position of a selected model face.", "app": "SketchUp", "details": "The Push/Pull tool remained active and the distance field visibly changed during the edits."}, {"start_s": 15916.27, "end_s": 15926.685, "action": "Orbit-scrolled to a stair-like section, selected a face, and used Push/Pull interactions to alter the visible rectangular step geometry.", "intent": "Shape the stair or step geometry in the model.", "app": "SketchUp", "details": "The view changed from the corner to a stepped section, with a rectangular face visibly selected during Push/Pull editing."}, {"start_s": 15926.685, "end_s": 15936.568, "action": "Continued orbiting and scrolling around the stepped model, selected another face, and applied further Push/Pull adjustments before returning to selection mode.", "intent": "Continue refining the modeled steps and adjacent surfaces.", "app": "SketchUp", "details": "The selected white face and adjacent step edges changed in view while the distance readout updated."}, {"start_s": 15936.568, "end_s": 15956.155, "action": "Navigated extensively through the SketchUp model with scrolling and orbiting, selected and adjusted large faces with Push/Pull, and resized the SketchUp window near the end of the span.", "intent": "Inspect and modify additional model surfaces while repositioning the workspace.", "app": "SketchUp", "details": "The window resize occurred at the end, and the final evidence showed a different oblique view of the model corner."}, {"start_s": 15956.155, "end_s": 15965.895, "action": "Restored and repositioned the SketchUp window, scrolled and entered keyboard shortcuts, then clicked model faces and ended in selection mode after hiding the application window.", "intent": "Continue model inspection and face editing after a window state change.", "app": "SketchUp", "details": "The application was briefly unhidden and later hidden; the model remained visible with a corner and segmented surface in the final evidence."}, {"start_s": 15965.895, "end_s": 15975.521, "action": "Adjusted the view around the stair model with orbiting, scrolling, and clicks, then used Push/Pull on a long rectangular face; the distance readout changed as the face was manipulated.", "intent": "Modify the selected stair-area face while inspecting it from different angles.", "app": "SketchUp 2026", "details": "A long white rectangular face remained active in Push/Pull mode."}, {"start_s": 15975.521, "end_s": 15985.254, "action": "Changed the camera around the stair landing, switched to selection, and clicked and dragged across the long rectangular geometry before returning to Push/Pull manipulation.", "intent": "Inspect and adjust the stair-area geometry.", "app": "SketchUp 2026", "details": "The model view alternated between close-up views of the landing and adjacent stair surfaces."}, {"start_s": 15985.254, "end_s": 15995.467, "action": "Orbited and zoomed around the stair assembly, selected the long upper face, and continued Push/Pull interaction; the face became highlighted with a purple stipple pattern and a distance value appeared.", "intent": "Select and edit the upper stair or landing surface.", "app": "SketchUp 2026", "details": "The selected rectangular face was visibly highlighted at the end."}, {"start_s": 15995.467, "end_s": 16004.788, "action": "Navigated around the selected landing face with orbiting and clicks, then continued Push/Pull interaction and adjusted the face while viewing the stairs from above.", "intent": "Continue shaping the stair landing geometry.", "app": "SketchUp 2026", "details": "The active white landing face and surrounding stair steps stayed in view."}, {"start_s": 16004.788, "end_s": 16014.279, "action": "Zoomed out from the stair area, switched to selection, and made several clicks and drags on the model; the view expanded from the stair landing to show the broader building layout and multiple house structures.", "intent": "Inspect the edited stair area in the context of the larger model.", "app": "SketchUp 2026", "details": "The final view showed two building layouts, with the stair assembly in the nearer structure."}, {"start_s": 16014.279, "end_s": 16023.916, "action": "Orbited and zoomed through the building model, moving from the overall layout to a close view of the stairwell and adjacent doors and walls.", "intent": "Review the stairwell and surrounding architectural geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The final view centered on a stair flight, landing, walls, and nearby doors."}, {"start_s": 16023.916, "end_s": 16034.651, "action": "Scrolled and orbited the SketchUp camera around the stair and upper-floor geometry, moving from a close structural view to a broader view of the stairwell and adjacent rooms.", "intent": "Inspect the 3D building model from different angles.", "app": "SketchUp", "details": "Middle-click navigation and scroll gestures changed the camera view; no model edits are visible."}, {"start_s": 16034.651, "end_s": 16044.725, "action": "Continued orbiting and zooming out around the stairwell, then pulled back to reveal two separate building-model views and their floor plans.", "intent": "Review the overall building layout and compare model views.", "app": "SketchUp", "details": "The final view shows a detailed model on the right and a smaller partial model on the left."}, {"start_s": 16044.725, "end_s": 16051.918, "action": "Scrolled and adjusted the camera toward the interior, bringing the living area, dining area, stairwell, and surrounding rooms into a closer overhead view.", "intent": "Inspect interior room arrangement and circulation.", "app": "SketchUp", "details": "Only camera navigation is evident; no geometry was changed."}, {"start_s": 16051.918, "end_s": 16061.444, "action": "Scrolled and orbited around the interior model, then zoomed out to show the long building layout, bedrooms, central rooms, and stair area from above.", "intent": "Review the building plan at multiple scales.", "app": "SketchUp", "details": "Middle-click navigation changed the viewpoint without visible editing."}, {"start_s": 16061.444, "end_s": 16070.656, "action": "Continued scrolling and orbiting between close interior views and a wider overview of both building models, ending with the main floor plan centered and enlarged.", "intent": "Examine and reframe the architectural model for overview inspection.", "app": "SketchUp", "details": "No object selection or construction edit is visible."}, {"start_s": 16070.656, "end_s": 16081.386, "action": "Orbited and zoomed around the building model, shifting from an exterior side perspective to a higher view over the rooms, bedrooms, stairwell, and central living spaces.", "intent": "Inspect the model\u2019s exterior and interior organization from another angle.", "app": "SketchUp", "details": "Navigation remained view-only; no model elements were visibly modified."}, {"start_s": 16081.386, "end_s": 16091.728, "action": "Zoomed and orbited around the SketchUp architectural model, moving from a close interior view to a wider view showing two building layouts.", "intent": "Review the overall 3D building arrangement.", "app": "SketchUp 2026", "details": "Navigated the model using middle-click and scroll gestures; no geometry was visibly edited."}, {"start_s": 16091.728, "end_s": 16101.774, "action": "Continued orbiting and zooming the SketchUp scene, alternating between the two building models and settling on a closer oblique view of their rooms and staircases.", "intent": "Inspect the building layouts from different angles.", "app": "SketchUp 2026", "details": "Only camera navigation was observed."}, {"start_s": 16101.774, "end_s": 16110.927, "action": "Zoomed out to compare both models, then orbited and zoomed back toward the larger building until its exterior walls, doors, windows, and central stairs filled the view.", "intent": "Examine the larger model and compare it with the smaller layout.", "app": "SketchUp 2026", "details": "Used middle-click orbiting and scroll-based zooming without visible editing."}, {"start_s": 16110.927, "end_s": 16122.433, "action": "Navigated around the larger building at close range, viewing exterior doors and windows, then zoomed out to show both models again.", "intent": "Review exterior and overall model views.", "app": "SketchUp 2026", "details": "The span ended with a wide two-model view in SketchUp."}, {"start_s": 16122.433, "end_s": 16142.433, "action": "Switched briefly through Windows Explorer and the recorder, returned to SketchUp, and continued zooming and orbiting the architectural models.", "intent": "Resume reviewing the SketchUp model after an application switch.", "app": "SketchUp 2026", "details": "The visible model changed to a lighter, less detailed architectural view; no editing action was shown."}, {"start_s": 16142.433, "end_s": 16152.972, "action": "Zoomed and orbited into the upper rooms of the smaller building, bringing two windowed rooms, interior doors, and the staircase into a close oblique view.", "intent": "Inspect the upper-level rooms and openings.", "app": "SketchUp 2026", "details": "Performed camera navigation only; no model geometry was visibly modified."}, {"start_s": 16152.972, "end_s": 16162.663, "action": "Orbited and zoomed around the SketchUp house model, then selected a rectangular wall or floor area with the drawing tool active.", "intent": "Inspect and position the 3D model for geometry work.", "app": "SketchUp 2026", "details": "The view changed from a wider house layout to a close-up of the upper rooms; a blue rectangular selection and dimension readout were visible."}, {"start_s": 16162.663, "end_s": 16172.914, "action": "Orbited and zoomed the model between wider and close-up views, briefly switched to the Select tool, and entered a few keyboard characters while continuing inspection.", "intent": "Navigate the model and review geometry from different angles.", "app": "SketchUp 2026", "details": "The house rooms, doors, windows, stairs, and a separate building remained visible; no definite geometry change was shown."}, {"start_s": 16172.914, "end_s": 16182.941, "action": "Selected or continued drawing across an upper room area, then orbited and zoomed out to view the full house layout and surrounding model.", "intent": "Inspect the upper-room geometry and its placement in the overall model.", "app": "SketchUp 2026", "details": "A blue line/rectangle and dimension readout appeared before the camera moved to a wider perspective."}, {"start_s": 16182.941, "end_s": 16192.479, "action": "Orbited and zoomed toward the stairwell and lower exterior, clicking along edges while the drawing tool remained active.", "intent": "Inspect or position geometry around the stairs and adjacent walls.", "app": "SketchUp 2026", "details": "The view progressed from the stairwell to a close exterior wall; an \u201cOn Edge in Group\u201d tooltip and a blue drawing line were visible."}, {"start_s": 16192.479, "end_s": 16200.435, "action": "Continued orbiting and zooming through the hallway and stair area, clicking several points while extending or positioning a blue line with the drawing tool.", "intent": "Work on or inspect edges and dimensions around the hallway and stairs.", "app": "SketchUp 2026", "details": "Close views showed brown doors, corridor walls, stair treads, and an active blue line with dimension readouts."}, {"start_s": 16200.435, "end_s": 16211.338, "action": "Orbited and zoomed around the stairwell and adjacent rooms, clicked near stair and wall edges, and continued positioning geometry with the drawing tool.", "intent": "Refine or inspect the stairwell and surrounding architectural geometry.", "app": "SketchUp 2026", "details": "The final view remained a close-up of the stair structure and neighboring walls; a small active drawing marker was visible."}, {"start_s": 16211.338, "end_s": 16221.131, "action": "Navigated around the SketchUp model with repeated view adjustments and clicks, then activated a drawing tool and positioned the cursor over the stair-area geometry.", "intent": "Inspect and begin editing the stair-area geometry.", "app": "SketchUp 2026", "details": "The model view remained focused on a close-up of walls, floor surfaces, and stairs; the final frame showed an active drawing tool with dimension readouts."}, {"start_s": 16221.131, "end_s": 16231.157, "action": "Adjusted the camera to a wider overhead view, selected model geometry, and opened its context menu with options including Erase, Hide, Make Component, and Make Group.", "intent": "Inspect or modify the selected model element.", "app": "SketchUp 2026", "details": "A purple-highlighted floor/area selection was visible beneath the context menu."}, {"start_s": 16231.157, "end_s": 16240.415, "action": "Closed the menu, navigated around the model with extensive view adjustments, and selected an edge or face near the lower stair area.", "intent": "Reposition the view and inspect geometry near the stairs.", "app": "SketchUp 2026", "details": "The final view showed a blue-highlighted boundary line along the foreground geometry."}, {"start_s": 16240.415, "end_s": 16250.108, "action": "Continued orbiting or zooming around the stair and floor geometry, then selected the area again and began a drag operation.", "intent": "Examine and manipulate the selected floor-area geometry.", "app": "SketchUp 2026", "details": "The selection changed between close and wider views, with purple-highlighted surfaces visible near the end."}, {"start_s": 16250.108, "end_s": 16258.59, "action": "Adjusted the camera around the selected area, activated an orbit/navigation control, and then switched to a drawing tool to place a rectangular outline on the floor near the stair edge.", "intent": "Create or position new geometry in the stair-area floor space.", "app": "SketchUp 2026", "details": "The final frame showed an in-progress rectangular outline with dimension readouts."}, {"start_s": 16258.59, "end_s": 16268.827, "action": "Navigated to a wider view, continued drawing from a corner across the floor area, and clicked another point near the stair edge to define the geometry.", "intent": "Continue constructing geometry across the floor near the stairs.", "app": "SketchUp 2026", "details": "The final frame showed a blue edge spanning the white floor surface beside the stairs."}, {"start_s": 16268.827, "end_s": 16278.737, "action": "Adjusted the SketchUp camera by orbiting and scrolling around the stairwell and adjacent floor areas.", "intent": "Inspect the 3D model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 16278.737, "end_s": 16288.941, "action": "Selected and manipulated the model while orbiting and zooming out, revealing the surrounding rooms, doors, walls, and stairwell.", "intent": "Navigate and inspect the building layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 16288.941, "end_s": 16299.382, "action": "Scrolled to zoom far out from the interior unit, exposing the complete small floor plan and another building model to the right.", "intent": "Review the model in a broader context.", "app": "SketchUp 2026", "details": null}, {"start_s": 16299.382, "end_s": 16310.013, "action": "Orbited and zoomed around the floor plan, briefly selecting model geometry and ending on a closer view of the hallway and stairwell.", "intent": "Inspect interior geometry and navigation spaces.", "app": "SketchUp 2026", "details": null}, {"start_s": 16310.013, "end_s": 16319.97, "action": "Continued zooming and orbiting around the hallway and stairs, then selected geometry near the lower edge; the final view showed the whole unit with highlighted edges.", "intent": "Examine and select part of the building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 16319.97, "end_s": 16329.424, "action": "Selected and manipulated floor geometry near the front of the unit, typed \u201cp,\u201d and activated the Push/Pull tool to set a distance, leaving multiple floor faces highlighted.", "intent": "Modify or prepare to modify the selected floor geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active at the end, with a displayed distance of approximately 1' 7 3/4\"."}, {"start_s": 16329.424, "end_s": 16339.893, "action": "Typed `1\"` and pressed Enter, then scrolled, clicked, and orbited/panned through the SketchUp house model to inspect interior walls and stairs.", "intent": "Navigate and inspect the 3D house model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 16339.893, "end_s": 16348.91, "action": "Scrolled extensively and used middle-button navigation to pull back from a close interior view to a wider overview of the house model and nearby model elements.", "intent": "Adjust the camera to review the overall building layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 16348.91, "end_s": 16358.624, "action": "Scrolled and orbited around the model, moving from an overview into close views of floor and wall edges; clicked near the geometry and typed `p`.", "intent": "Navigate the model and inspect a specific floor or wall area.", "app": "SketchUp 2026", "details": null}, {"start_s": 16358.624, "end_s": 16369.32, "action": "Clicked and dragged on model geometry, scrolled through views, and selected the Push/Pull tool; interacted with a face while the distance field showed approximately 5 5/16 inches, then returned to an overview.", "intent": "Modify or inspect the dimensions of a selected face in the house model.", "app": "SketchUp 2026", "details": null}, {"start_s": 16369.32, "end_s": 16379.541, "action": "Scrolled and orbited into the stair and hallway area, clicked several faces and edges, and dragged to select geometry while the floor or stair region became highlighted.", "intent": "Inspect and select interior floor and stair geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 16379.541, "end_s": 16390.093, "action": "Dragged and clicked around the hallway and stair geometry, then orbited and scrolled to a low underside view of the building floor and surrounding walls.", "intent": "Continue navigating and inspecting the building structure from interior and underside viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 16390.093, "end_s": 16400.277, "action": "Adjusted the SketchUp camera around the selected building geometry with middle-clicks, briefly typed \u201cm\u201d and a space, and scrolled to reposition the view.", "intent": "Navigate and inspect the 3D model.", "app": "SketchUp 2026", "details": "The view shifted across close-up floor and wall geometry."}, {"start_s": 16400.277, "end_s": 16410.079, "action": "Continued navigating the model with clicks, middle-button camera movement, scrolling, and a brief drag; typed \u201cm\u201d and a space while repositioning the view.", "intent": "Inspect different areas of the 3D model.", "app": "SketchUp 2026", "details": "The camera moved from close-up edges and walls to a broader interior view."}, {"start_s": 16410.079, "end_s": 16419.875, "action": "Scrolled and orbited/panned around the model, then adjusted the view through additional clicks and drags to reveal the house layout, rooms, doors, and staircase from above.", "intent": "Review the building layout from multiple 3D viewpoints.", "app": "SketchUp 2026", "details": "The view broadened to show the main building and another building section."}, {"start_s": 16419.875, "end_s": 16430.177, "action": "Scrolled and orbited around the building, moving from an interior close-up to an elevated overview and then zooming farther out to show the modeled structure alongside a second structure.", "intent": "Compare and inspect the overall model arrangement.", "app": "SketchUp 2026", "details": "System configuration and network-related events occurred during navigation, with no visible application change."}, {"start_s": 16430.177, "end_s": 16436.309, "action": "Scrolled repeatedly to adjust the camera and zoom over the two visible building models, settling on a wider overhead view.", "intent": "Continue reviewing the overall 3D scene.", "app": "SketchUp 2026", "details": "The primary building remained centered while the adjacent building stayed visible on the right."}, {"start_s": 16436.309, "end_s": 16447.034, "action": "Scrolled to make a final camera adjustment while viewing both building models from above.", "intent": "Maintain an overview of the modeled structures.", "app": "SketchUp 2026", "details": "The scene remained in a wide overhead inspection view."}, {"start_s": 16447.034, "end_s": 16467.034, "action": "Remained inactive while viewing the SketchUp model showing multiple building interiors.", "intent": "Review the current architectural model.", "app": "SketchUp", "details": null}, {"start_s": 16467.034, "end_s": 16479.077, "action": "Scrolled and middle-clicked repeatedly to orbit and adjust the camera around the central building model, ending on a closer view of its rooms and staircase.", "intent": "Inspect the building model from different angles.", "app": "SketchUp", "details": "The view changed substantially while the model geometry remained unchanged."}, {"start_s": 16479.077, "end_s": 16487.433, "action": "Switched to Microsoft Edge, focused the address bar, entered \u201c3d,\u201d and submitted a search for \u201c3d warehouse.\u201d", "intent": "Search for a 3D Warehouse model or resource.", "app": "Microsoft Edge", "details": "The Edge title changed to \u201c3d warehouse - Search.\u201d"}, {"start_s": 16487.433, "end_s": 16494.221, "action": "Switched through Windows Explorer and opened SketchUp\u2019s Import dialog, leaving the Downloads folder visible with \u201clift+door\u201d selected.", "intent": "Import a downloaded SketchUp model into the project.", "app": "SketchUp", "details": "The Import dialog showed the SketchUp file \u201clift+door\u201d selected."}, {"start_s": 16494.221, "end_s": 16504.693, "action": "Confirmed the import and navigated the SketchUp view around the newly visible elevator-door object, zooming and orbiting to inspect it closely.", "intent": "Inspect the imported lift-door component.", "app": "SketchUp", "details": "The view ended on a close-up of the freestanding elevator door model."}, {"start_s": 16504.693, "end_s": 16514.541, "action": "Adjusted the view around the imported door, selected it, activated the Rotate tool, and rotated the selected object to an angle of 30 degrees.", "intent": "Orient the imported door component in the model.", "app": "SketchUp", "details": "The selected door was highlighted in blue and the Rotate tool displayed Angle 30.0."}, {"start_s": 16514.541, "end_s": 16524.424, "action": "Entered 90, navigated and zoomed around the SketchUp elevator model, then selected geometry near the elevator doors.", "intent": "Inspect and position the elevator-area model geometry.", "app": "SketchUp 2026", "details": "The view changed from an upper elevator perspective to a close-up with blue-highlighted edges and call buttons."}, {"start_s": 16524.424, "end_s": 16534.681, "action": "Zoomed out to the building, selected a freestanding door-like component, and moved it through the model toward an interior stair/elevator area.", "intent": "Place or reposition a door component in the building model.", "app": "SketchUp 2026", "details": "The Move tool remained active and displayed changing distance values while the selected component was repositioned."}, {"start_s": 16534.681, "end_s": 16545.262, "action": "Continued navigating around the selected elevator-door assembly and moved it toward a wall or floor edge, ending with the component still selected.", "intent": "Align the elevator-door assembly with nearby building geometry.", "app": "SketchUp 2026", "details": "Close views showed the selected assembly against wall and floor edges with the Move tool active."}, {"start_s": 16545.262, "end_s": 16555.454, "action": "Orbiting and zooming around the stairwell, clicked to inspect the elevator assembly, and ended on a close front view of the elevator doors.", "intent": "Review the elevator placement from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view clearly showed the double elevator doors, header panel, adjacent stairs, and wall switch."}, {"start_s": 16555.454, "end_s": 16565.917, "action": "Selected the elevator-door assembly, zoomed out, entered a move interaction, and repositioned or inspected it from an elevated stairwell view.", "intent": "Adjust or verify the elevator-door assembly placement.", "app": "SketchUp 2026", "details": "Blue outlines indicated the assembly was selected; the view ended with it centered beneath the stair opening."}, {"start_s": 16565.917, "end_s": 16575.942, "action": "Navigated away from the stairwell and worked on a detached door-like component, switching to the Line tool and beginning a line near its lower edge.", "intent": "Edit or add geometry to the detached component.", "app": "SketchUp 2026", "details": "The final view showed the detached component isolated on the ground plane with the Line tool active and a length readout."}, {"start_s": 16575.942, "end_s": 16585.953, "action": "Scrolled and clicked around the selected 3D frame, typed \u201cm,\u201d and adjusted the view until the full frame was visible.", "intent": "Inspect and reposition the modeled frame.", "app": "SketchUp 2026", "details": "Selected blue-outlined frame remained active while the camera view changed."}, {"start_s": 16585.953, "end_s": 16595.969, "action": "Activated rotation controls, dragged around the selected frame, and adjusted the view to inspect it from a smaller angled perspective.", "intent": "Rotate and inspect the 3D model.", "app": "SketchUp 2026", "details": "A rotation protractor appeared over the selected frame."}, {"start_s": 16595.969, "end_s": 16605.065, "action": "Orbit-rotated the selected frame to a more upright angled view and positioned the rotation control near its top edge.", "intent": "Change the viewing angle for inspection.", "app": "SketchUp 2026", "details": "The selected blue wireframe frame remained visible with the rotation protractor."}, {"start_s": 16605.065, "end_s": 16615.425, "action": "Scrolled repeatedly to adjust the zoom and clicked to orbit the selected frame, bringing a larger front-facing view into position.", "intent": "Refine the camera view of the model.", "app": "SketchUp 2026", "details": "The model shifted from a distant angled view to a larger upright view."}, {"start_s": 16615.425, "end_s": 16625.54, "action": "Rotated the selected frame to a side-on orientation and left the rotation angle at 90 degrees; typed \u201cc\u201d near the end of the span.", "intent": "Orient the model for side inspection.", "app": "SketchUp 2026", "details": "The status bar showed Angle 90.0 and the rotation protractor remained active."}, {"start_s": 16625.54, "end_s": 16635.602, "action": "Scrolled and orbited around the selected frame, entered several \u201cc\u201d and space keystrokes, then clicked and dragged to continue adjusting the model view.", "intent": "Continue inspecting and manipulating the model orientation.", "app": "SketchUp 2026", "details": "The view moved to a close-up side perspective and ended with the rotation control visible."}, {"start_s": 16635.602, "end_s": 16645.647, "action": "Clicked and adjusted the rotation tool around the selected cabinet-like model, then scrolled and middle-clicked to reposition the view.", "intent": "Manipulate the model view and rotation setup.", "app": "SketchUp 2026", "details": "The model remained selected in blue with the rotation protractor visible."}, {"start_s": 16645.647, "end_s": 16654.961, "action": "Scrolled through the close-up model view and clicked to set the rotation center and begin rotating the selected geometry, reaching an angle of 20.2.", "intent": "Rotate the selected model component for inspection or placement.", "app": "SketchUp 2026", "details": "The rotation tool remained active and the selected frame was shown from a changed angle."}, {"start_s": 16654.961, "end_s": 16665.369, "action": "Scrolled and clicked around the model, then switched to the Line tool and positioned for a first endpoint without completing a visible line.", "intent": "Inspect the model and prepare to draw geometry.", "app": "SketchUp 2026", "details": "The view changed to a close-up of the cabinet frame; the Line tool was active at the end."}, {"start_s": 16665.369, "end_s": 16674.965, "action": "Clicked and navigated around the model, then activated the rotation tool and adjusted the view around the lower frame area.", "intent": "Continue inspecting and orienting the selected model component.", "app": "SketchUp 2026", "details": "The model was shown in a tall perspective with the rotation protractor visible near its base."}, {"start_s": 16674.965, "end_s": 16685.912, "action": "Clicked the model and moved the rotation tool around its lower-right corner, then scrolled and middle-clicked to adjust the camera view.", "intent": "Set up or inspect another rotation of the model.", "app": "SketchUp 2026", "details": "The rotation tool prompt indicated locating a start point, and the selected geometry remained outlined in blue."}, {"start_s": 16685.912, "end_s": 16695.601, "action": "Scrolled and middle-clicked to navigate, clicked the rotation tool, and zoomed or orbited out to reveal the selected small component alongside larger floor-plan model sections.", "intent": "Reframe the scene and inspect the component in the broader model context.", "app": "SketchUp 2026", "details": "The final view showed the selected blue component separated from two larger architectural model groups."}, {"start_s": 16695.601, "end_s": 16710.329, "action": "Rotated the selected door-like model component with the rotation tool, adjusting the angle and center while changing the camera view.", "intent": "Adjust the component's orientation and inspect its placement.", "app": "SketchUp 2026", "details": "Selected geometry remained highlighted in blue; the angle field showed changing values."}, {"start_s": 16710.329, "end_s": 16720.414, "action": "Orbited and zoomed around the model, moving from a close view of the selected component to a wider view of the building and its detached placement.", "intent": "Inspect the component and surrounding building geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The view changed substantially through orbit and zoom gestures; no definite geometry edit is visible."}, {"start_s": 16720.414, "end_s": 16730.146, "action": "Moved the selected door-like component across the model while orbiting and zooming, ending with it positioned near the stair landing and adjacent wall opening.", "intent": "Place the component in the building model.", "app": "SketchUp 2026", "details": "The Move tool status and distance field were visible, and the component stayed highlighted blue."}, {"start_s": 16730.146, "end_s": 16740.051, "action": "Orbited and zoomed around the stairwell and elevator-like door assembly, inspecting the component from close front and side angles.", "intent": "Review the placed component's alignment within the stairwell.", "app": "SketchUp 2026", "details": "The view ended on a close-up of the gray double-door assembly beside the stairs."}, {"start_s": 16740.051, "end_s": 16751.071, "action": "Continued orbiting around the door assembly and adjusted the camera to show the stairs, header, and door face from below and in front.", "intent": "Inspect the assembly and its surrounding clearance.", "app": "SketchUp 2026", "details": "No confirmed geometry change is visible; interactions are primarily middle-button orbiting."}, {"start_s": 16751.071, "end_s": 16761.631, "action": "Selected the door assembly and activated the Scale tool, manipulating its handles while orbiting to another angle; left the object selected with the scale box visible.", "intent": "Resize or prepare to resize the door assembly.", "app": "SketchUp 2026", "details": "Green scale handles and a yellow bounding box were visible, with the scale field showing 1.00."}, {"start_s": 16761.631, "end_s": 16771.661, "action": "Orbit around the selected elevator-like doorway assembly, adjust the view, and click around its upper and side components; enter a space key.", "intent": "Inspect the model assembly from nearby angles.", "app": "SketchUp 2026", "details": "The doorway assembly remained highlighted in blue while the camera view shifted slightly."}, {"start_s": 16771.661, "end_s": 16781.411, "action": "Orbit and zoom far out from the doorway, select and drag within the model, then click and adjust the view again; enter brief keys including space and letters.", "intent": "Reposition the camera and manipulate the selected model component.", "app": "SketchUp 2026", "details": "The view changed from a close underside perspective to a distant overview of the building and a separated doorway object."}, {"start_s": 16781.411, "end_s": 16791.109, "action": "Orbit and zoom around the building and isolated doorway, click several points, and activate the rectangle tool to draw a small rectangular shape near the model.", "intent": "Navigate the 3D scene and begin creating or editing geometry.", "app": "SketchUp 2026", "details": "The view ended with the isolated doorway at right and a small blue-outlined rectangle near the active drawing cursor."}, {"start_s": 16791.109, "end_s": 16800.761, "action": "Drag and reposition the isolated doorway assembly, enter brief keys, zoom and click around it, then continue moving it with the Move tool.", "intent": "Place and adjust the doorway assembly in the scene.", "app": "SketchUp 2026", "details": "The doorway remained selected and ended upright on a small base, with move handles visible."}, {"start_s": 16800.761, "end_s": 16810.295, "action": "Click the Rotate tool, rotate the selected doorway assembly while changing the view, then zoom out and inspect the result.", "intent": "Rotate and review the orientation of the doorway assembly.", "app": "SketchUp 2026", "details": "A rotation protractor appeared over the selected assembly before the view pulled back."}, {"start_s": 16810.295, "end_s": 16819.614, "action": "Drag the selected doorway assembly and activate rotation, then rotate it along a constrained axis while zooming and orbiting the scene.", "intent": "Further rotate and orient the doorway assembly.", "app": "SketchUp 2026", "details": "The assembly remained selected with a rotation protractor and an angle readout of 8.4 visible."}, {"start_s": 16819.614, "end_s": 16829.759, "action": "Scrolled and middle-clicked repeatedly while orbiting the selected door-like model, changing the camera to a more frontal view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 16829.759, "end_s": 16838.486, "action": "Activated the Rotate tool and clicked the model to set a rotation center, leaving the rotation protractor visible around the upper portion.", "intent": "Prepare to rotate the selected model.", "app": "SketchUp 2026", "details": null}, {"start_s": 16838.486, "end_s": 16849.006, "action": "Clicked and rotated the model with the Rotate tool, producing a visible angle guide and a displayed angle of 10.1 degrees.", "intent": "Adjust the model's orientation.", "app": "SketchUp 2026", "details": "Rotate tool remained active with the angle field showing 10.1."}, {"start_s": 16849.006, "end_s": 16858.828, "action": "Completed the rotation and orbited the camera around the model, changing from a side view to a front-facing view of the door assembly.", "intent": "Review the model after repositioning it.", "app": "SketchUp 2026", "details": null}, {"start_s": 16858.828, "end_s": 16869.363, "action": "Zoomed and navigated toward the lower portion of the model, then switched to an offset-related tool and clicked near the base; the view ended close to the selected base area.", "intent": "Inspect or modify spacing around the model base.", "app": "SketchUp 2026", "details": "The status bar indicated an offset measurement workflow near the end of the span."}, {"start_s": 16869.363, "end_s": 16878.626, "action": "Selected model geometry near the base, zoomed and navigated around it, then activated the Rotate tool and left the rotation protractor visible beside the model.", "intent": "Continue inspecting and positioning the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 16878.626, "end_s": 16888.946, "action": "Rotated the selected 3D door-like assembly using the rotation tool, clicking and adjusting the view around the model.", "intent": "Adjust the model\u2019s orientation for inspection.", "app": "SketchUp 2026", "details": "Selected geometry remained highlighted in blue."}, {"start_s": 16888.946, "end_s": 16899.42, "action": "Switched to selection, navigated around the model, and rotated the selected assembly to approximately 8.5 degrees before continuing the view adjustment.", "intent": "Inspect the assembly from another angle.", "app": "SketchUp 2026", "details": "The rotation tool showed an 8.5 angle value and the assembly stayed selected."}, {"start_s": 16899.42, "end_s": 16909.466, "action": "Zoomed out and repositioned the camera, then selected and rotated the assembly again to change its displayed orientation.", "intent": "Review the model at a wider scale and adjust its viewpoint.", "app": "SketchUp 2026", "details": "The model became smaller in the viewport and rotation guides appeared around it."}, {"start_s": 16909.466, "end_s": 16919.832, "action": "Rotated the selected assembly and zoomed in toward its lower portion, ending with a close view of the base and frame.", "intent": "Inspect the lower geometry closely.", "app": "SketchUp 2026", "details": "The view changed from the full assembly to a close-up of the bottom edge and surrounding base."}, {"start_s": 16919.832, "end_s": 16929.304, "action": "Zoomed and orbited around the lower section, clicked and dragged on the geometry, and continued navigating until the base and frame were shown from another side.", "intent": "Examine the base and lower frame from multiple angles.", "app": "SketchUp 2026", "details": "The model alternated between shaded and blue-highlighted selected geometry during navigation."}, {"start_s": 16929.304, "end_s": 16939.344, "action": "Zoomed far out to view the entire assembly in the surrounding workspace, then navigated back toward the lower frame and base with additional clicks and orbiting.", "intent": "Compare the overall placement with a close inspection of the base.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the lower front frame over the white rectangular base."}, {"start_s": 16939.344, "end_s": 16949.38, "action": "Adjusted the SketchUp view around the selected wall or frame face using clicks, scrolling, and orbiting; ended with the close-up model view repositioned.", "intent": "Refine the 3D view and inspect the selected face.", "app": "SketchUp", "details": null}, {"start_s": 16949.38, "end_s": 16968.876, "action": "Navigated the SketchUp model with middle-button orbiting, scrolling, and dragging; moved from a close front view to a more distant view of the modeled structures.", "intent": "Inspect the model from different angles and distances.", "app": "SketchUp", "details": null}, {"start_s": 16968.876, "end_s": 16986.781, "action": "Switched to Microsoft Edge, reviewed 3D Warehouse search results for \u201clift door,\u201d scrolled through model cards, and then hid the browser window.", "intent": "Browse lift-door models for a possible reference or component.", "app": "Microsoft Edge", "details": "3D Warehouse search results showed 559 model results for \u201clift door.\u201d"}, {"start_s": 16986.781, "end_s": 16996.345, "action": "Returned to SketchUp, navigated the scene, and opened File > Import so the 3D Model import command was available.", "intent": "Prepare to import a model or component into the SketchUp scene.", "app": "SketchUp", "details": "The File menu was open with Import highlighted and the 3D Model submenu visible."}, {"start_s": 16996.345, "end_s": 17006.118, "action": "Closed the import menu, activated the component placement tool, and navigated around the scene while positioning the lift-door component near the building models.", "intent": "Place the imported lift-door component in the SketchUp scene.", "app": "SketchUp", "details": "The lift-door component was visible separately from the building models during placement."}, {"start_s": 17006.118, "end_s": 17016.494, "action": "Orbited and zoomed through the SketchUp scene, moving from the building layout toward a close-up view of the elevator doors and surrounding wall.", "intent": "Inspect the placed elevator-door component in context.", "app": "SketchUp", "details": "The final view showed closed double elevator doors, a top indicator panel, and a wall call-button panel."}, {"start_s": 17016.494, "end_s": 17026.403, "action": "Adjusted the SketchUp view with clicks, scrolling, and orbiting; entered 90 in the active angle field, then continued navigating the model.", "intent": "Orient and inspect the 3D building model.", "app": "SketchUp 2026", "details": "The view changed from a close angled building view to a wider overhead view."}, {"start_s": 17026.403, "end_s": 17036.539, "action": "Selected and moved geometry while zooming and panning through the model; entered a character during the operation and left the move tool active.", "intent": "Reposition and inspect model components.", "app": "SketchUp 2026", "details": "The view ended on a closer room and stair area with a move distance shown."}, {"start_s": 17036.539, "end_s": 17046.953, "action": "Scrolled and navigated from the overall building view toward a wall-mounted elevator detail, briefly selecting geometry and using the move/orbit controls.", "intent": "Inspect the elevator and surrounding building geometry.", "app": "SketchUp 2026", "details": "The view progressed from multiple building blocks to a close elevator-door view."}, {"start_s": 17046.953, "end_s": 17056.963, "action": "Zoomed in on the elevator assembly, entered characters while interacting with the selected geometry, then clicked to clear the selection and continued viewing it.", "intent": "Inspect or adjust the elevator detail.", "app": "SketchUp 2026", "details": "The elevator and surrounding wall were shown first selected in blue and then unselected."}, {"start_s": 17056.963, "end_s": 17065.723, "action": "Navigated around the model with scrolling, orbiting, and clicks; selected and manipulated nearby wall geometry while entering characters during the operation.", "intent": "Examine and reposition building geometry near the elevator and stair area.", "app": "SketchUp 2026", "details": "The view became an extreme close-up of selected wall edges and corners."}, {"start_s": 17065.723, "end_s": 17074.493, "action": "Continued orbiting and zooming around the selected elevator and adjacent stairwell, using middle-click navigation and leaving the geometry highlighted.", "intent": "Inspect the elevator enclosure and nearby stairs from different angles.", "app": "SketchUp 2026", "details": "The final view showed the elevator wall, doorway, and stairwell at close range."}, {"start_s": 17074.493, "end_s": 17083.202, "action": "Navigated around the SketchUp house model with repeated middle-button orbit/pan actions and scrolls, then selected and repositioned the visible stairwell and adjacent wall/door geometry.", "intent": "Inspect and adjust the stairwell-area model geometry.", "app": "SketchUp 2026", "details": "A blue-highlighted component remained selected while the camera moved from an angled overview to a more top-down view."}, {"start_s": 17083.202, "end_s": 17093.124, "action": "Orbited and zoomed closely around the stairwell and nearby wall, then selected the wall or door assembly and changed the view to inspect it from the opposite side.", "intent": "Examine the selected architectural component in context.", "app": "SketchUp 2026", "details": "The selected assembly was outlined in blue near the stairs; system configuration changes were also recorded mid-span."}, {"start_s": 17093.124, "end_s": 17102.89, "action": "Entered a scale operation and manipulated the selected wall-and-door assembly with scale grips while orbiting around it; left the scale value at approximately 0.95.", "intent": "Resize the selected architectural assembly.", "app": "SketchUp 2026", "details": "Green scale handles and a yellow bounding outline were visible around the selected component."}, {"start_s": 17102.89, "end_s": 17111.134, "action": "Completed the scale interaction, then selected and moved the architectural assembly while orbiting and zooming around the lower wall and doorway area.", "intent": "Continue positioning the resized model component.", "app": "SketchUp 2026", "details": "The status bar showed an active move operation with a displayed distance of about 4 11/16 inches."}, {"start_s": 17111.134, "end_s": 17121.037, "action": "Zoomed far out to view both house model sections, then navigated back toward the selected lower model and orbited around its base and surrounding geometry.", "intent": "Review the component placement within the broader model.", "app": "SketchUp 2026", "details": "The selected geometry remained highlighted while the camera alternated between a distant overview and a close-up."}, {"start_s": 17121.037, "end_s": 17131.386, "action": "Zoomed and orbited around the stairwell doorway, selected the wall-and-door assembly, and initiated another scale adjustment using the visible scale handles.", "intent": "Refine the size and placement of the doorway assembly.", "app": "SketchUp 2026", "details": "The final view showed the component highlighted in blue with a yellow scale boundary and an active Red Scale field."}, {"start_s": 17131.386, "end_s": 17141.083, "action": "Navigated around the SketchUp building model with repeated orbit/zoom movements, moving from an overhead room view toward a close view of the elevator and adjacent stairs.", "intent": "Inspect the elevator area from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 17141.083, "end_s": 17150.372, "action": "Orbited and zoomed around the elevator enclosure, selected the elevator assembly, and activated the Scale tool so the model displayed scaling handles.", "intent": "Prepare the elevator assembly for resizing.", "app": "SketchUp", "details": "The elevator assembly was selected and shown with scale handles."}, {"start_s": 17150.372, "end_s": 17158.006, "action": "Adjusted the selected elevator enclosure with the Scale tool, then zoomed out to review its placement within the surrounding stairwell and corridor.", "intent": "Resize or refine the elevator enclosure and review the result.", "app": "SketchUp", "details": "The selected enclosure displayed scale handles before the view was pulled back."}, {"start_s": 17158.006, "end_s": 17168.129, "action": "Orbited around the building and elevator, selected the elevator enclosure, and manipulated it with the Move tool before changing to a wider exterior-facing view.", "intent": "Reposition or inspect the elevator enclosure in the building model.", "app": "SketchUp", "details": "The elevator enclosure was highlighted with manipulation handles during the adjustment."}, {"start_s": 17168.129, "end_s": 17177.986, "action": "Moved and adjusted the elevator-related geometry, zoomed out to review the whole floor, then zoomed back in toward the elevator wall and door.", "intent": "Position the elevator assembly and inspect its alignment in context.", "app": "SketchUp", "details": "The wider view showed the floor plan, while the ending view focused closely on the elevator door and surrounding wall."}, {"start_s": 17177.986, "end_s": 17191.181, "action": "Clicked repeatedly around the elevator geometry, zoomed and panned closer, and continued dragging the selected model area to refine or inspect the elevator door and wall.", "intent": "Fine-tune or closely inspect the elevator assembly.", "app": "SketchUp", "details": "The view ended in a close-up of the elevator doors, header panel, and wall outline."}, {"start_s": 17191.181, "end_s": 17196.154, "action": "Clicked and scrolled in the SketchUp viewport, changing the view from a close-up of the elevator assembly to a wider view of the surrounding walls and floor.", "intent": "Adjust the model view to inspect the elevator in context.", "app": "SketchUp 2026", "details": null}, {"start_s": 17196.154, "end_s": 17215.736, "action": "Paused in the SketchUp viewport with the elevator and surrounding room geometry visible; no sustained interaction occurred until a final click near the upper-right viewport area.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 17215.736, "end_s": 17225.881, "action": "Scrolled and middle-clicked to orbit the SketchUp camera, then clicked and dragged around the elevator assembly, ending on a different angled view of the elevator and adjacent walls.", "intent": "Orbit and inspect the elevator model from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 17225.881, "end_s": 17235.514, "action": "Clicked and scrolled around the elevator geometry, briefly selecting or manipulating visible edges and faces, and changed to a more distant angled view with selection outlines around the wall assembly.", "intent": "Inspect and adjust the view or selection of the elevator enclosure.", "app": "SketchUp 2026", "details": null}, {"start_s": 17235.514, "end_s": 17247.05, "action": "Clicked and dragged on the model while zooming and orbiting, moving from a close-up of the elevator doors and control panel to an even closer view of the lower doorway area; brief key presses occurred without visible text entry.", "intent": "Examine detailed geometry around the elevator doorway and controls.", "app": "SketchUp 2026", "details": null}, {"start_s": 17247.05, "end_s": 17253.526, "action": "Scrolled and clicked to zoom back out, then orbited the camera to reveal the full house interior and site boundary with the elevator assembly positioned separately to the right.", "intent": "Review the elevator placement within the broader building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 17253.526, "end_s": 17273.526, "action": "Remained in SketchUp with the architectural model visible and made several scroll inputs without an evident view change.", "intent": "Review the model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 17273.526, "end_s": 17284.094, "action": "Scrolled and orbited around the model, bringing a detached rectangular panel into closer view and leaving the orbit tool active.", "intent": "Inspect the detached model component from different angles.", "app": "SketchUp 2026", "details": "The detached rectangular panel became prominent on the right side of the scene."}, {"start_s": 17284.094, "end_s": 17293.713, "action": "Zoomed and orbited closer to the detached panel, selected a small dark rectangular component, and began moving it with the Move tool after typing shortcut keys.", "intent": "Position a small component near the panel.", "app": "SketchUp 2026", "details": "The small component was highlighted in blue above the larger framed panel."}, {"start_s": 17293.713, "end_s": 17302.698, "action": "Selected and moved geometry around the framed panel, then orbited and zoomed out to review its placement in the surrounding architectural model.", "intent": "Adjust and inspect component placement.", "app": "SketchUp 2026", "details": "A move operation displayed a distance of approximately 1' 9 9/16\" before the view was pulled back."}, {"start_s": 17302.698, "end_s": 17312.799, "action": "Orbited around the framed panel and nearby small components, clicked and dragged geometry, and changed the view to inspect the assembly from the side.", "intent": "Review the adjusted assembly from multiple angles.", "app": "SketchUp 2026", "details": "The framed panel remained visible while the camera shifted from a front view to an angled side view."}, {"start_s": 17312.799, "end_s": 17322.49, "action": "Selected the small rectangular component, moved it while entering shortcut keys, then orbited and zoomed away to review the broader model area.", "intent": "Reposition the small component and inspect the resulting model context.", "app": "SketchUp 2026", "details": "The component was highlighted near the panel before the final view shifted to a wider overhead scene."}, {"start_s": 17322.49, "end_s": 17332.779, "action": "Navigated around the SketchUp model with scrolling and view changes, dragged across the workspace, and selected a small detached rectangular component while reframing the house model.", "intent": "Inspect and position model elements in the 3D workspace.", "app": "SketchUp 2026", "details": null}, {"start_s": 17332.779, "end_s": 17344.224, "action": "Selected the detached component, entered a move operation, typed a distance value, and navigated to place the selected rectangular element near the stair and elevator-like opening.", "intent": "Move a model component into position within the building.", "app": "SketchUp 2026", "details": "The selected component remained highlighted in blue while the move distance field was active."}, {"start_s": 17344.224, "end_s": 17354.508, "action": "Adjusted the camera around the stairwell and opening, selected the opening geometry, and activated scaling to enlarge or reshape the selected frame.", "intent": "Refine the size and placement of the opening or frame geometry.", "app": "SketchUp 2026", "details": "The final view showed the selected opening outlined in yellow and blue with the Scale tool active."}, {"start_s": 17354.508, "end_s": 17364.556, "action": "Worked on the selected opening with camera adjustments and scale-handle interactions, then changed to an orbit view to inspect the result from the front and side.", "intent": "Inspect and adjust the opening geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The opening frame was selected with scale grips before the view changed to a close front perspective."}, {"start_s": 17364.556, "end_s": 17374.054, "action": "Navigated around the building model with repeated view adjustments and inspected the front opening and adjacent stair structure from increasingly close angles.", "intent": "Review the edited building component and surrounding geometry.", "app": "SketchUp 2026", "details": "The final view showed the opening and its vertical panels without an active selection."}, {"start_s": 17374.054, "end_s": 17383.615, "action": "Zoomed and orbited away from the building, selected a small detached rectangular object, and began moving it while viewing the full house model and ground outline.", "intent": "Reposition a detached model component relative to the building.", "app": "SketchUp 2026", "details": "The final view showed the whole house, the selected detached object, and an active move distance readout."}, {"start_s": 17383.615, "end_s": 17393.639, "action": "Navigated around the SketchUp architectural model with orbiting, scrolling, and clicks, then activated the Tape Measure tool and began positioning a guide from the stair/elevator area.", "intent": "Inspect the model and establish a measurement or guide reference.", "app": "SketchUp 2026", "details": "The view remained focused on the stairs, elevator enclosure, and adjacent floor; the measurement field showed a length of about 8 13/16 inches."}, {"start_s": 17393.639, "end_s": 17403.479, "action": "Continued manipulating the model view with clicks, scrolling, and orbiting, then zoomed out to reveal the larger building layout and surrounding geometry.", "intent": "Review the overall model context after working near the stair and elevator area.", "app": "SketchUp 2026", "details": "The final view showed a small floor-plan-like building model with additional geometry above it."}, {"start_s": 17403.479, "end_s": 17413.391, "action": "Selected and orbited around the building model, zooming into the interior rooms and staircase before returning to a close view of the elevator wall while keeping the guide/measurement workflow active.", "intent": "Inspect interior architectural details and reposition the viewpoint for measurement.", "app": "SketchUp 2026", "details": "The view progressed from an overhead room layout to a close-up of the stair and elevator wall; the status bar indicated guide creation."}, {"start_s": 17413.391, "end_s": 17423.606, "action": "Orbited and zoomed through the interior, moving from the stairwell and rooms toward the elevator enclosure, then clicked near the elevator wall and continued placing or adjusting a guide.", "intent": "Examine the elevator and stairwell area and refine the guide location.", "app": "SketchUp 2026", "details": "The final view centered on the elevator doors, adjacent stairs, and nearby wooden doors; a length of about 3 feet 11 7/16 inches was visible."}, {"start_s": 17423.606, "end_s": 17429.922, "action": "Navigated back to the stair and elevator wall with orbiting and clicks, then positioned a guide along the wall near the two-button control plate.", "intent": "Align a measurement guide with the elevator-side wall geometry.", "app": "SketchUp 2026", "details": "The guide line and endpoints were visible, with the measurement field showing about 8 1/8 inches."}, {"start_s": 17429.922, "end_s": 17440.294, "action": "Clicked to finish or adjust the guide near the elevator wall, then orbited slightly and continued inspecting the stairs, control plate, and adjacent wall.", "intent": "Finalize the guide placement and verify the nearby model geometry.", "app": "SketchUp 2026", "details": "The view remained a close-up of the staircase and elevator wall, with the guide line still visible."}, {"start_s": 17440.294, "end_s": 17450.639, "action": "Scrolled and adjusted the SketchUp view around a small wall-mounted two-button plate, then selected the plate and changed the active tool.", "intent": "Inspect and prepare the wall-mounted plate for editing.", "app": "SketchUp 2026", "details": "The plate and surrounding wall geometry remained visible; selection changed by the end of the span."}, {"start_s": 17450.639, "end_s": 17461.173, "action": "Selected the wall plate, dragged it while using the Move tool, and repositioned it on the wall as the camera view zoomed and orbited.", "intent": "Move the two-button plate to a new position on the wall.", "app": "SketchUp 2026", "details": "The plate remained highlighted in blue and the Move tool distance readout appeared."}, {"start_s": 17461.173, "end_s": 17471.771, "action": "Orbited and zoomed out from the plate to inspect the surrounding building, then returned toward the wall and opened the Edit menu before continuing view manipulation.", "intent": "Inspect the plate placement within the larger model and access editing controls.", "app": "SketchUp 2026", "details": "The Edit menu was briefly open; the model overview and wall plate were both shown during the span."}, {"start_s": 17471.771, "end_s": 17481.521, "action": "Selected the wall plate, moved it again, and adjusted the view while keeping the two-button geometry highlighted.", "intent": "Refine the plate placement on the wall.", "app": "SketchUp 2026", "details": "The plate was visibly selected in blue during the move operation."}, {"start_s": 17481.521, "end_s": 17491.508, "action": "Selected the plate and used the Scale tool to resize it, dragging scale handles while zooming around the geometry.", "intent": "Resize the wall-mounted plate and its associated geometry.", "app": "SketchUp 2026", "details": "Yellow scale bounds and red/blue scale handles were visible around the selected plate."}, {"start_s": 17491.508, "end_s": 17501.44, "action": "Continued scaling and adjusting the selected plate, then orbited and zoomed the camera to inspect the resized result on the wall.", "intent": "Finalize the plate scale and review its placement.", "app": "SketchUp 2026", "details": "The plate ended selected in blue without scale handles, shown against the surrounding wall."}, {"start_s": 17501.44, "end_s": 17511.142, "action": "Adjusted the scale of the selected two-button wall plate by dragging scale grips, entering spaces, and repeatedly zooming or scrolling around the model.", "intent": "Refine the wall plate dimensions in the 3D model.", "app": "SketchUp 2026", "details": "The selected wall plate remained highlighted while scale values changed."}, {"start_s": 17511.142, "end_s": 17521.134, "action": "Continued scaling the wall plate, zoomed and orbited around it with middle-clicks, then selected and adjusted another grip near its lower edge.", "intent": "Continue fitting the wall plate to the surrounding wall geometry.", "app": "SketchUp 2026", "details": "The wall plate stayed selected and displayed changing scale readouts."}, {"start_s": 17521.134, "end_s": 17530.967, "action": "Zoomed and orbited to reposition the view, selected the wall plate, and dragged a scale grip to resize it within the larger model.", "intent": "Refine the plate placement and proportions.", "app": "SketchUp 2026", "details": "The plate was shown selected with green scale grips in a wider model view."}, {"start_s": 17530.967, "end_s": 17542.309, "action": "Exited the scaling view, orbited and zoomed around the model, then moved the two-button wall plate into position on a wall beside the stairs.", "intent": "Place the wall plate in the architectural model.", "app": "SketchUp 2026", "details": "The plate became visible mounted on a wall near the stair and doorway area."}, {"start_s": 17542.309, "end_s": 17551.967, "action": "Zoomed toward the stair landing and elevator-like doorway, selected the mounted wall plate, and began a move or guide operation while entering a text character.", "intent": "Prepare to fine-tune the mounted plate location.", "app": "SketchUp 2026", "details": "The plate was visible on the wall beside the stairs; movement-related tool status was shown."}, {"start_s": 17551.967, "end_s": 17561.367, "action": "Clicked near the wall plate, zoomed in, and moved the plate upward or along the wall using a constrained guide or move operation; entered a dimension-like value and confirmed it.", "intent": "Fine-tune the wall plate position beside the stairs.", "app": "SketchUp 2026", "details": "The final view showed the enlarged two-button plate positioned on the wall beside the stairway."}, {"start_s": 17561.367, "end_s": 17572.901, "action": "Navigated around the SketchUp model with repeated zoom/scroll gestures and middle-button orbiting, moving from the elevator area to an isolated rectangular wall fixture.", "intent": "Inspect and reposition the 3D view around the modeled fixture.", "app": "SketchUp", "details": "The view ended focused on a small rectangular framed object with a dark inset panel."}, {"start_s": 17572.901, "end_s": 17583.043, "action": "Selected the rectangular fixture, activated scaling, adjusted its size, and then switched to the Move tool with the object selected.", "intent": "Resize and prepare to reposition the fixture in the model.", "app": "SketchUp", "details": "The status bar showed scaling followed by moving; the selected fixture remained highlighted in blue."}, {"start_s": 17583.043, "end_s": 17594.996, "action": "Moved the selected fixture through the 3D scene while orbiting and zooming, then positioned it on the wall above the elevator doors.", "intent": "Place the fixture on the elevator wall.", "app": "SketchUp", "details": "The fixture was visibly aligned above the elevator entrance and remained selected."}, {"start_s": 17594.996, "end_s": 17605.165, "action": "Adjusted the selected fixture on the elevator wall, used orbit/zoom navigation, and created or positioned a guide line through the fixture area.", "intent": "Refine the fixture placement and alignment.", "app": "SketchUp", "details": "The status bar showed guide creation, and a dashed vertical guide crossed the wall and fixture."}, {"start_s": 17605.165, "end_s": 17614.904, "action": "Manipulated the fixture with selection and grip actions, then orbited and zoomed to inspect the wall-mounted result from a closer view.", "intent": "Finalize or verify the fixture placement above the elevator.", "app": "SketchUp", "details": "The fixture appeared unselected in the final close view, mounted above the elevator doors."}, {"start_s": 17614.904, "end_s": 17624.768, "action": "Orbited and zoomed out from the elevator wall to review the surrounding floor layout, then clicked the guide-line area with the guide-related tool active.", "intent": "Review the completed placement in the broader model and manage construction guides.", "app": "SketchUp", "details": "The final view showed the elevator, adjacent rooms, doors, and stairs; the status bar indicated deletion of dashed guide lines."}, {"start_s": 17624.768, "end_s": 17634.699, "action": "Navigated around the SketchUp model with repeated orbit/zoom gestures, then selected the elevator door assembly so its edges highlighted blue.", "intent": "Inspect and select the elevator component for editing.", "app": "SketchUp 2026", "details": "Viewed the elevator beside the staircases from changing angles."}, {"start_s": 17634.699, "end_s": 17645.31, "action": "Zoomed and orbited closer around the selected elevator, clicking nearby components and briefly typing \u201cm\u201d; the elevator and adjacent wall fixtures remained highlighted.", "intent": "Examine the elevator assembly and prepare a component manipulation.", "app": "SketchUp 2026", "details": "Selection outlines were visible on the elevator doors and nearby switch plate."}, {"start_s": 17645.31, "end_s": 17656.341, "action": "Clicked the elevator area and continued orbiting/zooming, then moved the selected geometry; the view pulled back to show the elevator between the staircases.", "intent": "Reposition or copy selected elevator geometry within the model.", "app": "SketchUp 2026", "details": "SketchUp showed a move/copy-style cursor and a distance readout of about 4 9/16 inches."}, {"start_s": 17656.341, "end_s": 17666.571, "action": "Orbited and zoomed around the elevator, dragged the selected assembly, and typed \u201cs\u201d, a space, and \u201cs\u201d; the selection switched to scale mode with green grips around the elevator structure.", "intent": "Adjust the size or placement of the elevator assembly.", "app": "SketchUp 2026", "details": "The final view showed scale handles surrounding the selected elevator and wall elements."}, {"start_s": 17666.571, "end_s": 17676.957, "action": "Adjusted the selected elevator assembly in scale mode, typed a space, dragged a scale grip, and orbited to review the result; the view ended with the elevator unselected from a wider angle.", "intent": "Scale and visually review the elevator assembly in context.", "app": "SketchUp 2026", "details": "A blue scale value of 1.04 appeared before the wider inspection view."}, {"start_s": 17676.957, "end_s": 17687.057, "action": "Selected the elevator assembly again, typed \u201cs\u201d and a space, dragged scale grips on its upper geometry, and orbited around it; the final view showed the assembly selected with green scale handles from an elevated angle.", "intent": "Continue scaling and inspecting the elevator assembly.", "app": "SketchUp 2026", "details": "The selected elevator remained between the staircases, with scale grips visible in the final view."}, {"start_s": 17687.057, "end_s": 17697.62, "action": "Orbited and zoomed around the SketchUp house model, moving from a wide floor-plan view toward the stairwell and adjacent rooms.", "intent": "Inspect the 3D house layout and stair area.", "app": "SketchUp", "details": null}, {"start_s": 17697.62, "end_s": 17704.474, "action": "Continued orbiting and zooming around the house model, then pulled back to show two separate building layouts in the SketchUp workspace.", "intent": "Compare or inspect the modeled building layouts.", "app": "SketchUp", "details": null}, {"start_s": 17704.474, "end_s": 17718.928, "action": "Navigated the camera around the smaller building model, ending on a view of its stairwell and surrounding walls.", "intent": "Inspect the smaller building model and stairwell.", "app": "SketchUp", "details": null}, {"start_s": 17718.928, "end_s": 17724.83, "action": "Continued navigating and zooming out to frame both building models; typed the letter \u201cb\u201d and returned focus to the SketchUp window.", "intent": "Adjust the model view and interact with the active SketchUp workspace.", "app": "SketchUp", "details": null}, {"start_s": 17724.83, "end_s": 17739.418, "action": "Opened the SketchUp Default Tray and interacted with the Materials panel, displaying material categories and the Wood_Cherry_Original material while adjusting the model view; then switched to Windows Explorer.", "intent": "Review or select a material for the model.", "app": "SketchUp", "details": "The Materials category list was open, with Wood_Cherry_Original shown in the tray."}, {"start_s": 17739.418, "end_s": 17750.303, "action": "Switched to Microsoft Edge, moved between the 3D Warehouse results and a new tab, and typed \u201ctile \u201d into the browser.", "intent": "Search for a tile-related model or material online.", "app": "Microsoft Edge", "details": "The initial page showed 3D Warehouse search results for \u201clift door\u201d; a Bing results page for \u201c3d warehouse\u201d was also displayed."}, {"start_s": 17750.303, "end_s": 17766.722, "action": "Typed \u201cplugin\u201d into the search field, submitted it, reviewed Bing results for SketchUp tile and floor-generator plugins, and opened the Floor Generator listing in SketchUp Extension Warehouse.", "intent": "Search for relevant SketchUp tile-generation plugins.", "app": "Microsoft Edge", "details": "The Extension Warehouse Floor Generator page began loading."}, {"start_s": 17766.722, "end_s": 17777.798, "action": "Switched briefly through Windows Explorer and the recorder, returned to Edge, reviewed the Floor Generator extension page, scrolled, and then switched back to the Bing results tab.", "intent": "Inspect the Floor Generator extension and return to the search results.", "app": "Microsoft Edge", "details": "The page showed Floor Generator as a free extension with a Download button."}, {"start_s": 17777.798, "end_s": 17784.058, "action": "Scrolled the Extension Warehouse results and opened the Tilelook for SketchUp listing, waiting for its page to load.", "intent": "Inspect another SketchUp tile-layout plugin.", "app": "Microsoft Edge", "details": "The Tilelook for SketchUp page loaded with compatibility, category, and free-price information."}, {"start_s": 17784.058, "end_s": 17801.61, "action": "Scrolled through the Tilelook for SketchUp page to review its screenshots and description.", "intent": "Review Tilelook features and plugin details.", "app": "Microsoft Edge", "details": "The description identified Tilelook as a tile-layout and materials generator for SketchUp."}, {"start_s": 17801.61, "end_s": 17812.264, "action": "Returned to the Bing results, selected the SG Floor tile PRO plugin result, and scrolled while the Gumroad page loaded.", "intent": "Investigate another floor-tile plugin found in the search results.", "app": "Microsoft Edge", "details": "The selected SG Floor tile PRO plugin page remained mostly black while loading."}, {"start_s": 17812.264, "end_s": 17820.558, "action": "Returned to the Bing results, scrolled, selected the Dynamic Tile 3D Warehouse result, and waited for the model page to load.", "intent": "Inspect a Dynamic Tile model related to SketchUp flooring.", "app": "Microsoft Edge", "details": "The 3D Warehouse page showed Dynamic Tile with a Download button."}, {"start_s": 17820.558, "end_s": 17827.624, "action": "Scrolled through Bing results for \u201ctile plugin sketchup,\u201d briefly exposed the 3D Warehouse Dynamic Tile page, then returned to the search results and resized the Edge window.", "intent": "Review SketchUp tile-plugin search results and related resources.", "app": "Microsoft Edge", "details": "Search results included SketchUp PluginStore, Dynamic Tile, and floor-generator resources."}, {"start_s": 17827.624, "end_s": 17847.624, "action": "Paused on the Bing results page showing SketchUp tile-plugin links, related searches, and video results.", "intent": "Review available SketchUp tile-plugin information.", "app": "Microsoft Edge", "details": null}, {"start_s": 17847.624, "end_s": 17863.34, "action": "Remained on the Bing results page without visible interaction, then clicked the taskbar area to switch applications.", "intent": "Leave the search results and return to the modeling workspace.", "app": "Microsoft Edge", "details": "System configuration and connectivity indicators changed during the transition."}, {"start_s": 17863.34, "end_s": 17883.34, "action": "Switched to SketchUp 2026 and displayed two architectural floor-plan models with the Materials tray open and Wood_Cherry_Original selected.", "intent": "Continue working in the SketchUp model with material tools available.", "app": "SketchUp 2026", "details": "The modeling viewport showed two building layouts; the Materials tray was set to In Model."}, {"start_s": 17883.34, "end_s": 17903.34, "action": "Remained idle in SketchUp with the two floor-plan models visible and the Materials tray open on Wood_Cherry_Original.", "intent": "Inspect the current SketchUp model and material settings.", "app": "SketchUp 2026", "details": null}, {"start_s": 17903.34, "end_s": 17923.34, "action": "Remained idle in SketchUp, continuing to display the architectural floor plans and Wood_Cherry_Original material.", "intent": "Keep the modeling workspace open for review.", "app": "SketchUp 2026", "details": null}, {"start_s": 17923.34, "end_s": 17943.34, "action": "Remained idle in SketchUp with the 3D house models and Materials tray visible.", "intent": "Pause while viewing the SketchUp model.", "app": "SketchUp", "details": null}, {"start_s": 17943.34, "end_s": 17952.901, "action": "Remained on the SketchUp scene, then clicked the taskbar area to switch applications.", "intent": "Switch from SketchUp to a web browser.", "app": "SketchUp", "details": "The click occurred at the end of the span and initiated the application transition."}, {"start_s": 17952.901, "end_s": 17962.412, "action": "Switched to Microsoft Edge, focused the search field, entered a query beginning with \u201cface array\u201d and completed it as \u201cface array sketchup plugin,\u201d then submitted the search.", "intent": "Search for a SketchUp face-array plugin.", "app": "Microsoft Edge", "details": "Bing search results and autocomplete suggestions were visible."}, {"start_s": 17962.412, "end_s": 17973.217, "action": "Reviewed the Bing results for \u201cface array sketchup plugin,\u201d opened the Curic Face Array SketchUp Community result, and scrolled the results/page while it loaded.", "intent": "Investigate information about the Curic Face Array plugin.", "app": "Microsoft Edge", "details": "The results referenced Curic Face Array as a tool for arraying objects along a face."}, {"start_s": 17973.217, "end_s": 17983.181, "action": "Opened the SketchUp Help article \u201cAdding Extensions to SketchUp,\u201d scrolled through it, and then returned to the Curic Face Array community discussion.", "intent": "Review how SketchUp extensions are installed and return to the plugin information.", "app": "Microsoft Edge", "details": "The Help article and the Curic Face Array discussion were viewed in separate tabs."}, {"start_s": 17983.181, "end_s": 17994.059, "action": "Returned to the Bing results, scrolled through the Curic Face Array information, and opened the Gumroad Curic Face Array link, which began loading.", "intent": "Continue researching or access the Curic Face Array plugin page.", "app": "Microsoft Edge", "details": "The Bing overview described Curic Face Array as a SketchUp plugin for distributing objects across a face."}, {"start_s": 17994.059, "end_s": 18004.111, "action": "Viewed Bing search results for \u201cface array sketchup plugin,\u201d scrolled the results, and opened the KAM DESIGN result in a new Edge tab.", "intent": "Find information or a download for the SketchUp face array plugin.", "app": "Microsoft Edge", "details": "The new tab began loading the KAM DESIGN page."}, {"start_s": 18004.111, "end_s": 18019.385, "action": "Reviewed the KAM DESIGN plugin page, scrolled to the \u201cDownload Curic Face Array SKP PLUGIN\u201d section, and initiated the curic_face_array_v0.7.1-yagi.zip download.", "intent": "Download the Curic Face Array SketchUp plugin.", "app": "Microsoft Edge", "details": "The download completed and appeared in Edge\u2019s Downloads panel."}, {"start_s": 18019.385, "end_s": 18025.488, "action": "Switched to File Explorer, opened Downloads, and right-clicked the downloaded curic_face_array_v0.7.1-yagi archive.", "intent": "Locate and manage the downloaded plugin archive.", "app": "Windows File Explorer", "details": "The archive was selected in the Downloads folder and its context menu was open."}, {"start_s": 18025.488, "end_s": 18029.576, "action": "Reopened the archive\u2019s context menu in Downloads and selected an option that opened the archive in WinRAR.", "intent": "Inspect or extract the downloaded plugin archive.", "app": "Windows File Explorer", "details": "WinRAR launched for the selected ZIP archive."}, {"start_s": 18029.576, "end_s": 18036.572, "action": "Viewed the archive contents in WinRAR, selected the contained SketchUp plugin file, and opened its context menu.", "intent": "Prepare to extract or otherwise manage the plugin file.", "app": "WinRAR", "details": "The archive contained one SketchUp 2026 file; no extraction was completed during this span."}, {"start_s": 18036.572, "end_s": 18045.416, "action": "Returned to Downloads and opened the context menu for the curic_face_array_v0.7.1-yagi archive.", "intent": "Continue managing the downloaded archive.", "app": "Windows File Explorer", "details": "The archive remained selected with file-management options visible."}, {"start_s": 18045.416, "end_s": 18052.462, "action": "Opened the curic_face_array_v0.7.1-yagi.zip archive in WinRAR and selected the contained SketchUp file.", "intent": "Inspect the downloaded archive contents.", "app": "WinRAR", "details": "The archive contained one SketchUp 2026 file."}, {"start_s": 18052.462, "end_s": 18061.451, "action": "Closed the WinRAR archive window and brought SketchUp's Welcome screen to the foreground, leaving the Downloads folder visible behind it.", "intent": "Switch from archive inspection to SketchUp.", "app": "SketchUp", "details": "SketchUp displayed its Home screen with templates and recent files."}, {"start_s": 18061.451, "end_s": 18069.447, "action": "Returned to Downloads, reopened the curic_face_array_v0.7.1-yagi.zip archive, selected its contained file, and then closed the archive window.", "intent": "Reinspect the downloaded archive contents.", "app": "WinRAR", "details": "The archive item was selected before the window was closed."}, {"start_s": 18069.447, "end_s": 18075.053, "action": "Navigated from Downloads to the Desktop and pasted the curic_face_array_v0.7.1-yagi file, which appeared as a new SketchUp-related item.", "intent": "Place the downloaded extension file on the Desktop.", "app": "Windows Explorer", "details": "The Desktop view showed the newly added curic_face_array_v0.7.1-yagi item."}, {"start_s": 18075.053, "end_s": 18091.63, "action": "Switched through Edge and SketchUp, returned to the g+3 model, adjusted the view, and opened SketchUp's Extension Manager.", "intent": "Prepare SketchUp to install the downloaded extension.", "app": "SketchUp", "details": "The model view showed two building layouts, and the Extension Manager was opened."}, {"start_s": 18091.63, "end_s": 18097.995, "action": "Opened the extension file picker from Extension Manager, navigated to the Desktop, selected curic_face_array_v0.7.1-yagi, and left it ready to open.", "intent": "Select the downloaded extension for installation.", "app": "SketchUp", "details": "The Open dialog showed the selected file and the Open button."}, {"start_s": 18097.995, "end_s": 18102.748, "action": "Switched among SketchUp, Extension Manager, Curic Face Array, and the main model window, leaving the Extension Manager visible over the SketchUp model.", "intent": "Review installed SketchUp extensions while returning to the model.", "app": "SketchUp", "details": "Extension Manager showed multiple extensions enabled."}, {"start_s": 18102.748, "end_s": 18120.131, "action": "Closed the Extension Manager, opened the Face Array panel, repositioned and resized the panel, then scrolled through its controls while the SketchUp model remained visible.", "intent": "Inspect and adjust the Face Array extension interface.", "app": "SketchUp", "details": "The panel displayed Pattern, Surface, Layout, and Repeat X controls; no pattern or surface was selected."}, {"start_s": 18120.131, "end_s": 18124.509, "action": "Displayed the SketchUp model with two floor-plan-like structures and clicked to reopen the Curic Face Array window.", "intent": "Return to the Face Array tool for further configuration.", "app": "SketchUp", "details": null}, {"start_s": 18124.509, "end_s": 18144.509, "action": "Opened the Face Array panel, resized it, and scrolled down to the Layout controls showing Repeat X and Repeat Y options.", "intent": "Review additional Face Array layout settings.", "app": "SketchUp", "details": "No object or surface selection was visible."}, {"start_s": 18144.509, "end_s": 18155.227, "action": "Closed the Face Array panel, zoomed or navigated the SketchUp view, typed R, and began drawing a rectangular shape to the right of the model.", "intent": "Create or edit geometry in the SketchUp model after reviewing the extension settings.", "app": "SketchUp", "details": "The rectangle tool was active and a rectangle outline appeared beside the floor-plan models."}, {"start_s": 18155.227, "end_s": 18163.967, "action": "Entered rectangle dimensions of approximately 2' by 3', confirmed the input, and completed the rectangle; the new face became selected while the view shifted toward the model.", "intent": "Create a precisely sized rectangular face in SketchUp.", "app": "SketchUp", "details": "The Measurements field showed 2'3\" before the rectangle was selected."}, {"start_s": 18163.967, "end_s": 18173.846, "action": "Scrolled and adjusted the SketchUp view around the selected rectangular face, opened and dismissed its context menu, and changed the camera angle while keeping the face selected.", "intent": "Inspect and reposition the selected model face.", "app": "SketchUp", "details": "A selected, stippled rectangular face remained visible; the final view showed its selection bounds and axes."}, {"start_s": 18173.846, "end_s": 18182.792, "action": "Entered a bracket and adjusted the selected face with the Push/Pull tool, orbiting or zooming the view and entering 0.2 as a distance value.", "intent": "Modify the face geometry by setting a precise extrusion distance.", "app": "SketchUp", "details": "The Push/Pull tool was active and the distance field later showed 0.2."}, {"start_s": 18182.792, "end_s": 18195.185, "action": "Confirmed the geometry edit, navigated the SketchUp view with scrolling and orbiting, and then switched to Windows Explorer before the next application transition.", "intent": "Finish reviewing the modified model and move to another application.", "app": "SketchUp", "details": "The rectangular slab appeared unselected and thin in the final SketchUp view."}, {"start_s": 18195.185, "end_s": 18205.778, "action": "Switched to Microsoft Edge, cycled through tabs for the plugin page, a 3D Warehouse search, and a new tab, then focused the address bar and began typing a query starting with \u201cGLO\u201d.", "intent": "Search the web for a relevant design or tile reference.", "app": "Microsoft Edge", "details": "The Edge window ended on a new tab with the address bar focused."}, {"start_s": 18205.778, "end_s": 18213.368, "action": "Edited the Edge address-bar text by deleting the initial entry, typed \u201cnew\u201d, then replaced it with \u201cglossy tile\u201d while autocomplete suggestions updated.", "intent": "Formulate a web search query about glossy tiles.", "app": "Microsoft Edge", "details": "Autocomplete suggestions for \u201cglossy tile\u201d were visible."}, {"start_s": 18213.368, "end_s": 18223.482, "action": "Appended \u201cbest colour\u201d to the address-bar query, pressed Enter, and loaded Bing results for \u201cglossy tile best colour.\u201d", "intent": "Search for recommendations on the best glossy tile colour.", "app": "Microsoft Edge", "details": "Bing results displayed tile images and related glossy tile searches."}, {"start_s": 18223.482, "end_s": 18233.162, "action": "Switched to the Bing Images tab for \u201cglossy tile best colour\u201d and scrolled through the image results, ending on lower results.", "intent": "Review glossy tile colour and flooring image references.", "app": "Microsoft Edge", "details": null}, {"start_s": 18233.162, "end_s": 18244.359, "action": "Continued scrolling through Bing image results, opened an image preview, and clicked through several related tile images until a colour-tile image preview was displayed.", "intent": "Compare tile colour and finish examples.", "app": "Microsoft Edge", "details": null}, {"start_s": 18244.359, "end_s": 18254.13, "action": "Clicked through image-preview results and scrolled the preview gallery, then closed the preview to return to the Bing Images results page.", "intent": "Inspect additional glossy floor-tile references.", "app": "Microsoft Edge", "details": null}, {"start_s": 18254.13, "end_s": 18264.523, "action": "Selected another glossy tile result and opened its larger preview showing a pale marble-like tile; interacted with the preview and initiated a save operation.", "intent": "Save a selected tile image reference.", "app": "Microsoft Edge", "details": "A Save As window opened at the end of the span."}, {"start_s": 18264.523, "end_s": 18269.417, "action": "Entered \u201ctile\u201d in the Save As filename field and left the JPEG image ready to save on the Desktop.", "intent": "Name the downloaded tile image before saving.", "app": "Save As", "details": "The filename field contains \u201ctile\u201d; the Save button is visible but not yet confirmed."}, {"start_s": 18269.417, "end_s": 18275.156, "action": "Clicked Save, returned to Edge with the download recorded as \u201ctile.jpg,\u201d and switched to SketchUp 2026, displaying a flat rectangular model.", "intent": "Complete the tile image download and return to the 3D modeling workspace.", "app": "SketchUp 2026", "details": "The Edge Downloads panel shows tile.jpg; SketchUp is active at the end."}, {"start_s": 18275.156, "end_s": 18282.999, "action": "Switched to SketchUp, navigated the model view with repeated scrolling and middle-button actions, and zoomed in from the building to a single rectangular face.", "intent": "Adjust the model view to inspect a specific face.", "app": "SketchUp", "details": null}, {"start_s": 18282.999, "end_s": 18288.753, "action": "Opened the Create Material dialog and selected the texture-image option, which opened the Choose Image file picker.", "intent": "Create a textured SketchUp material.", "app": "SketchUp", "details": "The Materials tray shows the existing Wood_Cherry_Original material."}, {"start_s": 18288.753, "end_s": 18294.46, "action": "Navigated the Choose Image dialog from Documents to Desktop and selected the image file named tile.", "intent": "Choose an image texture for the material.", "app": "SketchUp", "details": "The selected file is shown as tile in the Desktop file picker."}, {"start_s": 18294.46, "end_s": 18308.801, "action": "Confirmed the selected tile image, returned to Create Material, enabled the texture image, and edited the material dimensions to 2 feet by 2 feet before confirming the dialog.", "intent": "Configure the tile texture material and apply its size settings.", "app": "SketchUp", "details": "The Create Material dialog displays tile.jpg with 2' values in both size fields."}, {"start_s": 18308.801, "end_s": 18318.865, "action": "Returned to the model, selected the rectangular face, and used the material-painting tool with view adjustments to apply the new light tile texture.", "intent": "Apply the configured tile material to the model face.", "app": "SketchUp", "details": "The Materials tray preview changes to the light tile texture."}, {"start_s": 18318.865, "end_s": 18324.296, "action": "Zoomed and adjusted the view around the textured rectangular face, leaving the light tile pattern clearly visible across it.", "intent": "Inspect the applied texture on the face.", "app": "SketchUp", "details": null}, {"start_s": 18324.296, "end_s": 18344.296, "action": "Remained idle in SketchUp with the textured rectangular face visible.", "intent": "Pause while reviewing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 18344.296, "end_s": 18348.959, "action": "Clicked the floating Face Array tool control.", "intent": "Open or activate the Face Array tool.", "app": "SketchUp 2026", "details": null}, {"start_s": 18348.959, "end_s": 18355.205, "action": "Switched to the Face Array panel, scrolled through its controls, and selected the textured face; the panel displayed layout and Repeat X/Repeat Y options.", "intent": "Configure a face-array operation for the selected surface.", "app": "SketchUp 2026", "details": "The selected face was outlined in blue."}, {"start_s": 18355.205, "end_s": 18375.205, "action": "Kept the Face Array panel open while reviewing the Layout, Repeat X, Repeat Y, and Object on Border controls for the selected face.", "intent": "Inspect array settings before applying changes.", "app": "SketchUp 2026", "details": "Trim was selected under Object on Border."}, {"start_s": 18375.205, "end_s": 18385.95, "action": "Scrolled the Face Array panel and clicked its close control, returning focus to the SketchUp model window.", "intent": "Finish reviewing the array settings and close the tool panel.", "app": "SketchUp 2026", "details": "The panel showed Group#84 with Len X 2' and Len Y 3'."}, {"start_s": 18385.95, "end_s": 18401.582, "action": "Selected the textured rectangular face, performed an extended drag while scrolling through the SketchUp view, and left the model area with the face no longer visible in the final view.", "intent": "Adjust or navigate the model view around the selected face.", "app": "SketchUp 2026", "details": "The Materials tray remained open on the right."}, {"start_s": 18401.582, "end_s": 18411.562, "action": "Switched to Edge, closed the image-search and prior tabs, opened a new tab, and edited the address-bar text by typing, deleting, and entering \u201ctile \u201d.", "intent": "Prepare a new web search related to tiles.", "app": "Microsoft Edge", "details": "Viewed a Bing image result for glossy tile colors before opening a new tab."}, {"start_s": 18411.562, "end_s": 18421.681, "action": "Submitted the search for \u201ctile plugin sketchup,\u201d opened a SketchUp Extension Warehouse result, and waited for the Floor Generator page to load.", "intent": "Find a SketchUp floor-generation extension.", "app": "Microsoft Edge", "details": "Loaded the Floor Generator extension page."}, {"start_s": 18421.681, "end_s": 18430.928, "action": "Clicked Download on the Floor Generator extension page and adjusted the Edge window size while the download confirmation appeared.", "intent": "Download the Floor Generator extension.", "app": "Microsoft Edge", "details": "The page displayed a successful-download confirmation."}, {"start_s": 18430.928, "end_s": 18442.661, "action": "Waited on the download confirmation and then switched from Edge to SketchUp.", "intent": "Return to SketchUp after downloading the extension.", "app": "Microsoft Edge", "details": "The Edge Downloads panel showed the downloaded extension file."}, {"start_s": 18442.661, "end_s": 18453.862, "action": "Opened the Extensions menu in SketchUp and displayed its extension-management options.", "intent": "Access SketchUp extension tools after downloading the extension.", "app": "SketchUp", "details": "The Extensions menu showed Extension Warehouse, Extension Manager, and related entries."}, {"start_s": 18453.862, "end_s": 18461.921, "action": "Brought up the SketchUp Extension Warehouse helper window, closed it, returned to the SketchUp model, and switched to Windows Explorer.", "intent": "Manage the downloaded extension or related files.", "app": "SketchUp", "details": "The existing SketchUp model remained visible with two floor-plan layouts; Windows Explorer became active at the end."}, {"start_s": 18461.921, "end_s": 18472.364, "action": "Switched to Microsoft Edge, reviewed the successful Floor Generator download confirmation, then returned to Bing search results and focused the search field.", "intent": "Review the completed extension download and begin a related search.", "app": "Microsoft Edge", "details": "The confirmation stated that Floor Generator was successfully downloaded and should be installed through SketchUp Extension Manager."}, {"start_s": 18472.364, "end_s": 18485.089, "action": "Entered a Bing query for \u201csg floor generator free download,\u201d submitted it, and reviewed the resulting search page before hiding the Edge window.", "intent": "Search for a free download source or information about the floor generator.", "app": "Microsoft Edge", "details": "Results included the SketchUp Extension Warehouse Floor Generator listing and other plugin download pages."}, {"start_s": 18485.089, "end_s": 18492.222, "action": "Switched to SketchUp, opened the Extension Warehouse panel, waited for it to load, and then closed or hid the panel.", "intent": "Access SketchUp extension resources before installation.", "app": "SketchUp", "details": "The model view showed two floor-plan-like layouts."}, {"start_s": 18492.222, "end_s": 18496.638, "action": "Opened SketchUp Extension Manager from the Extensions menu and reviewed the installed extensions list.", "intent": "Install the downloaded Floor Generator extension through SketchUp\u2019s extension management interface.", "app": "SketchUp", "details": "Extension Manager displayed enabled extensions and an Install Extension button."}, {"start_s": 18496.638, "end_s": 18500.866, "action": "Clicked Install Extension and opened the Downloads file picker, where the downloaded MyPanelGrid SketchUp extension file was selected.", "intent": "Choose a downloaded extension package for installation.", "app": "SketchUp", "details": "The Open dialog was in Downloads and filtered for Ruby files (*.rbz)."}, {"start_s": 18500.866, "end_s": 18506.139, "action": "Returned to SketchUp, confirmed that Floor Generator appeared enabled in Extension Manager, closed the manager, and returned to the model view.", "intent": "Verify that Floor Generator is installed and enabled, then resume working in the model.", "app": "SketchUp", "details": "The Extension Manager listed Floor Generator by PV Arjun with an Enabled control; the model view remained visible afterward."}, {"start_s": 18506.139, "end_s": 18510.235, "action": "Switched among SketchUp windows and attempted to run the Floor Generator tool; displayed a warning that a single face must be selected first.", "intent": "Attempt to generate flooring from a selected face.", "app": "SketchUp", "details": "Warning dialog remained visible."}, {"start_s": 18510.235, "end_s": 18515.491, "action": "Navigated the SketchUp model view with scroll and middle-button interactions, then selected floor faces around the rooms and stairs.", "intent": "Inspect and select model faces for floor-related editing.", "app": "SketchUp", "details": "Several floor regions became highlighted."}, {"start_s": 18515.491, "end_s": 18520.347, "action": "Opened Material Selection, reviewed the material field showing \u201cree_Complexion_2,\u201d and confirmed the dialog.", "intent": "Choose a material for the selected faces.", "app": "SketchUp", "details": "Material Selection dialog was closed after confirmation."}, {"start_s": 18520.347, "end_s": 18525.167, "action": "Opened Enter Panel Settings, reviewed the values for panel width, height, thickness, and spacing, then confirmed and returned to the model.", "intent": "Configure generated floor or panel dimensions.", "app": "SketchUp", "details": "Visible values were 80 cm width, 160 cm height, 9 mm thickness, and 3 mm spacing."}, {"start_s": 18525.167, "end_s": 18534.316, "action": "Unhid the SketchUp tray, navigated and zoomed the model, and interacted with the Materials tray while viewing the building from different scales.", "intent": "Inspect the model and material application area.", "app": "SketchUp", "details": "Materials tray was visible on the right; the view moved from the full model to a close-up of stairs and floor surfaces."}, {"start_s": 18534.316, "end_s": 18539.517, "action": "Confirmed a SketchUp dialog, viewed the textured floor surfaces in the model, then opened Material Selection again with \u201cree_Complexion_2\u201d shown.", "intent": "Apply or configure the selected floor material.", "app": "SketchUp", "details": "Textured flooring was visible before the Material Selection dialog reopened."}, {"start_s": 18539.517, "end_s": 18546.409, "action": "Selected text in the Panel Width field and edited the value, deleting characters at the end.", "intent": "Adjust the panel width setting.", "app": "SketchUp", "details": "The Enter Panel Settings dialog remained open with width, height, thickness, and spacing fields visible."}, {"start_s": 18546.409, "end_s": 18556.171, "action": "Typed a value beginning with 2' into the Panel Width field, then clicked and deleted several characters.", "intent": "Continue editing the panel width setting.", "app": "SketchUp", "details": "The width field visibly contained 21 at the captured point; other settings remained unchanged."}, {"start_s": 18556.171, "end_s": 18565.2, "action": "Typed 3' into the Panel Height field and clicked within the dialog fields.", "intent": "Edit the panel height setting.", "app": "SketchUp", "details": "The dialog showed Panel Width as 2' and Panel Height as 3' at the captured point."}, {"start_s": 18565.2, "end_s": 18585.2, "action": "Paused without recorded interaction while leaving the Enter Panel Settings dialog open.", "intent": "Wait or review the current panel settings.", "app": "SketchUp", "details": "No interaction was recorded; the architectural model and settings dialog remained visible."}, {"start_s": 18585.2, "end_s": 18595.843, "action": "Deleted the current Panel Width entry, leaving the field blank.", "intent": "Clear the panel width value for replacement.", "app": "SketchUp", "details": "The Panel Width field was blank at the captured point; Panel Height showed 3'."}, {"start_s": 18595.843, "end_s": 18608.106, "action": "Entered 60.96 in the Panel Width field, then clicked and edited the field again, beginning to type 91.", "intent": "Set or refine the panel width value.", "app": "SketchUp", "details": "At the captured point, Panel Width displayed 60.96; the dialog remained open and was not confirmed."}, {"start_s": 18608.106, "end_s": 18621.508, "action": "Edited the panel settings values, corrected an entry, and clicked and dragged in the SketchUp model after closing or confirming the dialog.", "intent": "Adjust panel dimensions and continue the model edit.", "app": "SketchUp", "details": "The Enter Panel Settings dialog showed width 60.96 cm, height 91.44 cm, thickness 9 mm, and spacing 3 mm."}, {"start_s": 18621.508, "end_s": 18631.491, "action": "Returned to SketchUp, scrolled and navigated the model, then selected the Paint Bucket tool and applied the terracotta material across floor faces.", "intent": "Apply a floor material throughout the model.", "app": "SketchUp", "details": "The floor surfaces visibly changed to a terracotta tile pattern."}, {"start_s": 18631.491, "end_s": 18641.485, "action": "Scrolled and navigated closer through the floor, then clicked floor faces to paint additional surfaces with the light stone material.", "intent": "Add contrasting flooring to selected areas.", "app": "SketchUp", "details": "Light stone-colored floor tiles appeared among the terracotta tiles."}, {"start_s": 18641.485, "end_s": 18650.923, "action": "Selected and painted several adjacent floor faces while panning and scrolling across the model.", "intent": "Extend the light stone flooring across the selected area.", "app": "SketchUp", "details": "More connected floor tiles changed to the light stone texture."}, {"start_s": 18650.923, "end_s": 18657.696, "action": "Navigated around the stair and hallway area with orbit and middle-click actions, then continued positioning the view over the tiled floors.", "intent": "Inspect and reposition the model while reviewing the flooring.", "app": "SketchUp", "details": "The view shifted to an elevated perspective showing the stairs, rooms, and mixed floor materials."}, {"start_s": 18657.696, "end_s": 18667.851, "action": "Pressed undo repeatedly, scrolled, and changed the camera to a wider overhead view of the house model.", "intent": "Revert recent material edits and review the overall model.", "app": "SketchUp", "details": "The final view showed the complete floor plan with terracotta floors, light stone areas, walls, windows, doors, and stairs."}, {"start_s": 18667.851, "end_s": 18677.721, "action": "Navigated around the SketchUp house model with orbit and zoom gestures, then changed the camera to a closer view of the stairwell and surrounding rooms.", "intent": "Inspect the interior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 18677.721, "end_s": 18688.755, "action": "Continued orbiting and zooming through the interior, then activated a drawing tool and began defining a rectangular textured floor or wall face.", "intent": "Create or adjust a rectangular surface in the model.", "app": "SketchUp 2026", "details": "A rectangular face became selected with visible texture and drawing handles."}, {"start_s": 18688.755, "end_s": 18698.836, "action": "Adjusted the view around the selected textured face using orbit and zoom gestures, leaving the large surface selected while inspecting its placement against the surrounding walls.", "intent": "Review the placement and extent of the modeled surface.", "app": "SketchUp 2026", "details": "The textured face remained highlighted as the camera moved from a close-up to an angled room view."}, {"start_s": 18698.836, "end_s": 18709.834, "action": "Orbit-zoomed around the selected surface, dragged across its edge, and continued drawing or adjusting the face with the active tool.", "intent": "Refine the selected surface geometry in the room.", "app": "SketchUp 2026", "details": "The model stayed in a close interior view with the textured face and drawing guides visible."}, {"start_s": 18709.834, "end_s": 18719.835, "action": "Continued manipulating the model with orbit and zoom gestures, used a line tool near the textured surface, and then zoomed out to review the overall house layout.", "intent": "Inspect the edited area and its relationship to the full model.", "app": "SketchUp 2026", "details": "The final view showed the complete multi-room house and stairwell from an elevated angle."}, {"start_s": 18719.835, "end_s": 18729.854, "action": "Orbited and zoomed back toward the interior, dragged across model geometry, and adjusted the view until a close-up of an interior room or surface filled the workspace.", "intent": "Continue inspecting or editing interior geometry.", "app": "SketchUp 2026", "details": "The camera ended on a close interior view with the Materials tray open."}, {"start_s": 18729.854, "end_s": 18739.628, "action": "Drew or adjusted a rectangular element on the model, entered partial text values, and navigated the view while the geometry updated.", "intent": "Modify model geometry using drawing inputs.", "app": "SketchUp 2026", "details": null}, {"start_s": 18739.628, "end_s": 18749.628, "action": "Continued drawing or adjusting the selected rectangular face, then completed the operation and returned to the selection tool.", "intent": "Finish shaping a model face or panel.", "app": "SketchUp 2026", "details": null}, {"start_s": 18749.628, "end_s": 18759.732, "action": "Entered a partial value, orbited and zoomed around the model, and inspected the resulting room and wall geometry from wider and closer views.", "intent": "Review the model geometry and placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 18759.732, "end_s": 18772.764, "action": "Navigated through the building model with orbiting and zooming, selected model areas, and switched into the Floor Generator SketchUp window.", "intent": "Inspect the model and access the floor-generation tool.", "app": "SketchUp 2026", "details": null}, {"start_s": 18772.764, "end_s": 18792.264, "action": "Opened Material Selection, confirmed the material value \u201cree_Complexion_2,\u201d then opened Enter Panel Settings and edited numeric panel fields, entering 60 and 90 in successive fields.", "intent": "Configure material and panel-generation settings.", "app": "SketchUp 2026", "details": "The panel dialog visibly contained fields for width, height, thickness, and spacing; height was 160, thickness 9, and spacing 3 before editing."}, {"start_s": 18792.264, "end_s": 18801.968, "action": "Returned to the main SketchUp model, zoomed and navigated across the floor areas, and applied or inspected a terracotta tiled floor pattern with visible grid lines.", "intent": "Review the generated floor treatment in the model.", "app": "SketchUp 2026", "details": "The final view showed terracotta-colored tiled surfaces across multiple rooms and corridors."}, {"start_s": 18801.968, "end_s": 18812.651, "action": "Scrolled and middle-clicked repeatedly in the SketchUp model, changing the camera from a close-up of the tiled floor and walls to a low side view.", "intent": "Navigate and inspect the 3D model.", "app": "SketchUp", "details": null}, {"start_s": 18812.651, "end_s": 18831.545, "action": "Orbited and zoomed the SketchUp model through multiple views, moving from the low side view to an overhead view of the floor plan and stair area; clicked around the model and briefly pressed control-key combinations.", "intent": "Inspect the building layout and position the view for editing.", "app": "SketchUp", "details": null}, {"start_s": 18831.545, "end_s": 18839.724, "action": "Switched among SketchUp windows and clicked faces in the model, leaving several floor areas selected with stippled highlighting and activating a painting-related tool before returning to selection.", "intent": "Select and prepare model faces for floor or material operations.", "app": "SketchUp", "details": null}, {"start_s": 18839.724, "end_s": 18844.695, "action": "Switched SketchUp windows, zoomed toward the selected floor area beside the stairs, and invoked a tool; a warning dialog reported that a single face must be selected before running it.", "intent": "Attempt an operation on one selected floor face.", "app": "SketchUp", "details": "A SketchUp warning dialog states: \u201cPlease select a single face before running the tool.\u201d"}, {"start_s": 18844.695, "end_s": 18859.878, "action": "Opened Material Selection and confirmed the displayed material, then opened Enter Panel Settings and edited the panel fields, setting width to 60, height to 90, and changing the thickness field to 6 while leaving the dialog open.", "intent": "Configure panel material and dimensions for the selected model area.", "app": "SketchUp", "details": "The Enter Panel Settings dialog visibly shows Panel Width 60 cm, Panel Height blank, Panel Thickness 9 mm, and Spacing Between Panels 3 mm at the sampled point; typing events indicate edits including 60, 90, and 6."}, {"start_s": 18859.878, "end_s": 18869.413, "action": "Confirmed the panel settings and navigated the SketchUp camera around the model, revealing brown tiled floor sections across the selected areas and then an elevated view of the building.", "intent": "Apply the configured panel operation and inspect the resulting floor layout.", "app": "SketchUp", "details": null}, {"start_s": 18869.413, "end_s": 18879.556, "action": "Orbited and zoomed around the SketchUp building model, then adjusted the view to inspect the tiled floor, walls, and staircase.", "intent": "Inspect the interior model from different angles.", "app": "SketchUp 2026", "details": "Materials tray remained open on the right."}, {"start_s": 18879.556, "end_s": 18889.381, "action": "Orbited and zoomed the camera from an exterior view toward an overhead interior view, revealing tiled rooms, walls, and the staircase.", "intent": "Review the building layout and interior geometry.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible."}, {"start_s": 18889.381, "end_s": 18899.204, "action": "Continued orbiting and zooming around the model, moving between close views of walls, tiled floors, openings, and the staircase.", "intent": "Examine additional areas of the 3D building model.", "app": "SketchUp 2026", "details": "View navigation dominated the span."}, {"start_s": 18899.204, "end_s": 18909.846, "action": "Zoomed far out and orbited from a close-up of a floor and wall to an elevated overall view of the building layout.", "intent": "Establish a broader overview of the modeled structure.", "app": "SketchUp 2026", "details": "Materials tray remained visible."}, {"start_s": 18909.846, "end_s": 18919.837, "action": "Orbited and zoomed around the building, briefly showing the full structure before pulling back to reveal another nearby model; made several undo-like key presses during navigation.", "intent": "Review the model in context and adjust the viewing state.", "app": "SketchUp 2026", "details": "The final view showed two building models in the workspace."}, {"start_s": 18919.837, "end_s": 18930.353, "action": "Dragged and orbited the camera from the distant overview toward the building exterior, then zoomed down to a close-up of the ground and a dark floor or slab surface.", "intent": "Inspect the exterior base and floor surfaces.", "app": "SketchUp 2026", "details": "No definite object edit could be confirmed."}, {"start_s": 18930.353, "end_s": 18941.402, "action": "Adjusted the SketchUp view around the brown floor slab using repeated clicks, scrolling, and a brief text entry, then pushed or pulled a floor face to extend the slab into a longer tiled strip.", "intent": "Modify the floor geometry and inspect the result.", "app": "SketchUp 2026", "details": "Materials tray remained open; the Push/Pull tool was active."}, {"start_s": 18941.402, "end_s": 18951.161, "action": "Navigated through the model with repeated orbiting, scrolling, and clicks, moving from a close view of the floor slab to an elevated view of the interior room layout.", "intent": "Inspect the modeled floor and room arrangement from different viewpoints.", "app": "SketchUp 2026", "details": "The final view showed multiple white walls, brown tiled flooring, and interior partitions."}, {"start_s": 18951.161, "end_s": 18960.837, "action": "Orbited and zoomed around the building interior, viewing the tiled corridors, walls, and stair area from overhead and close angles.", "intent": "Review the interior model geometry.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; navigation dominated the span."}, {"start_s": 18960.837, "end_s": 18970.801, "action": "Clicked and navigated around the floor and interior walls, then selected floor geometry; the view ended with several floor tile edges highlighted in blue.", "intent": "Select and inspect the tiled floor geometry.", "app": "SketchUp 2026", "details": "The Select tool and Materials tray were visible, and selected floor edges appeared blue."}, {"start_s": 18970.801, "end_s": 18981.235, "action": "Entered a brief text command, navigated the model, and used the Scale tool on a selected floor edge or strip before orbiting to another interior view.", "intent": "Adjust the scale or dimensions of selected floor geometry.", "app": "SketchUp 2026", "details": "The Scale tool was active with a visible red handle and a green scale value of 1.01."}, {"start_s": 18981.235, "end_s": 18991.242, "action": "Orbited and zoomed around the completed interior layout, inspecting rooms, tiled floors, doors, walls, and the central stairwell from overhead and closer views.", "intent": "Review the interior model from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray remained open; no definite geometry edit was visible."}, {"start_s": 18991.242, "end_s": 19002.221, "action": "Orbited and zoomed around the stairwell and tiled opening, changing the view from a close-up to a more centered overhead perspective.", "intent": "Inspect the model geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 19002.221, "end_s": 19011.88, "action": "Zoomed and orbited around the stairwell, then moved into a close view of the tiled opening and selected a floor face.", "intent": "Inspect and target a specific model surface.", "app": "SketchUp 2026", "details": null}, {"start_s": 19011.88, "end_s": 19022.051, "action": "Clicked and dragged across several model faces while orbiting, changing the view from a close wall/floor view to an angled view of the tiled area.", "intent": "Manipulate and inspect surfaces in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 19022.051, "end_s": 19032.131, "action": "Used the Eraser tool and dragged across multiple edges and faces, removing or modifying visible edge segments on the tiled wall/floor area.", "intent": "Clean up or edit model edges.", "app": "SketchUp 2026", "details": null}, {"start_s": 19032.131, "end_s": 19042.161, "action": "Continued dragging and orbiting through the model, zoomed out to review the rooms and stairwell, then returned to a floor close-up and selected a tiled face.", "intent": "Review the edited model and position a surface for material work.", "app": "SketchUp 2026", "details": null}, {"start_s": 19042.161, "end_s": 19051.351, "action": "Selected the Paint Bucket tool and clicked floor tiles, applying the marble-like material across adjacent floor faces while orbiting to inspect the result.", "intent": "Apply and inspect a floor material.", "app": "SketchUp 2026", "details": "The selected floor faces visibly changed from terracotta to a light marble texture."}, {"start_s": 19051.351, "end_s": 19060.723, "action": "Scrolled and orbited the SketchUp model, then clicked and dragged across the 3D view to reposition the camera around the tiled rooms and walls.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": "Materials tray remained open on the right."}, {"start_s": 19060.723, "end_s": 19071.277, "action": "Orbited and adjusted the camera through close views of the walls, tiled floor, and stairs, ending with the Paint Bucket tool selected over the model.", "intent": "Navigate to and prepare to edit model surfaces.", "app": "SketchUp", "details": "The Materials tray showed the selected material and swatches."}, {"start_s": 19071.277, "end_s": 19081.421, "action": "Clicked and dragged across floor and wall surfaces while orbiting, then pulled back to an overhead view of the tiled rooms and stair area.", "intent": "Apply or inspect materials on multiple model surfaces while navigating the layout.", "app": "SketchUp", "details": "The Paint Bucket cursor was visible and the Materials tray remained open."}, {"start_s": 19081.421, "end_s": 19091.457, "action": "Repeatedly clicked and dragged over tiled floor regions while orbiting and zooming out, revealing adjacent rooms, windows, and stairs from above.", "intent": "Paint or review floor surfaces across the model.", "app": "SketchUp", "details": "Large sections of cream and terracotta tile remained visible."}, {"start_s": 19091.457, "end_s": 19101.205, "action": "Clicked and dragged across additional floor areas and navigated through several overhead views, ending on a close view dominated by cream-colored tiled flooring.", "intent": "Continue applying or checking the selected material on floor surfaces.", "app": "SketchUp", "details": "The Paint Bucket tool remained active with the Materials tray open."}, {"start_s": 19101.205, "end_s": 19111.053, "action": "Clicked and dragged over tiled floor areas while orbiting and zooming, moving from a cream-tiled room to an adjacent room with cream and terracotta tiles.", "intent": "Continue editing and reviewing floor materials in neighboring rooms.", "app": "SketchUp", "details": "The final view showed multiple tiled rooms and windows from an elevated angle."}, {"start_s": 19111.053, "end_s": 19120.974, "action": "Clicked and dragged repeatedly across the SketchUp model while the Paint Bucket tool remained active, applying or sampling materials on tiled floor and room surfaces as the view shifted between rooms.", "intent": "Continue material application and inspection across the floor-plan model.", "app": "SketchUp", "details": "Materials tray was visible and the model showed tiled floors and dark walls."}, {"start_s": 19120.974, "end_s": 19134.763, "action": "Scrolled and used middle-button navigation to orbit and zoom through the interior, then zoomed out to an overview of the house floor plan.", "intent": "Inspect the model from interior and overall viewpoints.", "app": "SketchUp", "details": "The view changed from a close interior corridor to a top-down house overview."}, {"start_s": 19134.763, "end_s": 19139.423, "action": "Switched briefly between SketchUp windows, opened the View menu, and navigated to the Toolbars command.", "intent": "Access SketchUp toolbar visibility settings.", "app": "SketchUp", "details": "The View menu was open with Toolbars listed at the top."}, {"start_s": 19139.423, "end_s": 19146.462, "action": "Scrolled while the View menu state changed, then opened the Toolbars dialog and reviewed the available toolbar checkboxes.", "intent": "Review and configure visible SketchUp toolbars.", "app": "SketchUp", "details": "The Toolbars dialog displayed entries including Camera, Floor Generator, Getting Started, and Large Tool Set."}, {"start_s": 19146.462, "end_s": 19156.035, "action": "Closed or hid the toolbar interface, navigated the model with middle-button orbiting and scrolling, typed a shortcut, and selected the Rectangle tool to begin drawing on the large ground area.", "intent": "Return to modeling and start laying out a rectangular ground shape.", "app": "SketchUp", "details": "The final view showed the Rectangle tool active with a first corner placed and dimensions displayed."}, {"start_s": 19156.035, "end_s": 19165.575, "action": "Continued navigating and zooming around the ground area, then clicked and dragged with the Rectangle tool to define a larger rectangle beside the building.", "intent": "Create or extend a rectangular site or floor area.", "app": "SketchUp", "details": "A blue rectangle preview was visible on the ground plane with live dimensions."}, {"start_s": 19165.575, "end_s": 19175.181, "action": "Navigated the SketchUp camera around the interior model using clicks, middle-button navigation, and repeated scroll inputs, moving from an overhead room view to a close-up wall and floor corner.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 19175.181, "end_s": 19185.786, "action": "Selected geometry near the close-up corner, typed navigation shortcuts, dragged to adjust the view or geometry, and continued scrolling; the visible floor area became selected while the Move tool and distance readout appeared.", "intent": "Adjust or inspect the selected model geometry.", "app": "SketchUp 2026", "details": "The Move tool was active near the end of the span, with a distance readout of approximately 13/16 inch."}, {"start_s": 19185.786, "end_s": 19195.007, "action": "Typed a view shortcut and orbited through the model with repeated middle-button navigation and scrolling, changing from the selected floor and stair area to a close view of tiled flooring.", "intent": "Review the floor and surrounding interior geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 19195.007, "end_s": 19205.443, "action": "Orbited and scrolled along the tiled floor, clicked the floor geometry, and selected a broad set of floor edges and surfaces; the Move tool became active with a small distance readout.", "intent": "Select and prepare floor geometry for adjustment.", "app": "SketchUp 2026", "details": "The selected floor geometry was outlined in blue near the end of the span."}, {"start_s": 19205.443, "end_s": 19215.269, "action": "Used the Move tool and repeated view navigation, clicking and scrolling across the tiled floor before zooming or orbiting out to reveal the larger room layout and adjacent model.", "intent": "Inspect the floor placement and overall model context.", "app": "SketchUp 2026", "details": null}, {"start_s": 19215.269, "end_s": 19226.574, "action": "Clicked and continuously orbited or zoomed around the selected floor, moving from a wider view of the room models into an extreme close-up of the tiled surface and its brown seam.", "intent": "Continue inspecting the floor surface and seam geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 19226.574, "end_s": 19236.519, "action": "Navigated around the SketchUp architectural model by orbiting, dragging, clicking, and scrolling, moving from a close floor view to an elevated overview of the tiled floor plan and rooms.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 19236.519, "end_s": 19248.849, "action": "Orbited and zoomed the SketchUp scene to compare two building layouts, then opened the View menu and navigated to the Toolbars command.", "intent": "Adjust the model view and access toolbar settings.", "app": "SketchUp", "details": "The View menu was open with Toolbars available."}, {"start_s": 19248.849, "end_s": 19253.443, "action": "Opened the Toolbars dialog and interacted with the toolbar list, including the Floor Generator and Getting Started entries.", "intent": "Configure visible SketchUp toolbars.", "app": "SketchUp", "details": "The Toolbars dialog showed Floor Generator, Getting Started, and Large Tool Set checked."}, {"start_s": 19253.443, "end_s": 19258.647, "action": "Switched between the model and toolbar-related windows, interacted with the toolbar list, and attempted keyboard input before returning to the Toolbars dialog.", "intent": "Continue configuring the SketchUp toolbar display.", "app": "SketchUp", "details": "The Toolbars dialog remained open with toolbar entries visible."}, {"start_s": 19258.647, "end_s": 19262.858, "action": "Closed the Toolbars dialog, selected the Floor Generator tool, and triggered it without a valid single-face selection; dismissed the resulting warning and left the model with a floor face selected.", "intent": "Run the Floor Generator tool on a selected model face.", "app": "SketchUp", "details": "A warning stated: \u201cPlease select a single face before running the tool.\u201d"}, {"start_s": 19262.858, "end_s": 19272.669, "action": "Opened Material Selection, reviewed and selected the material field, then opened Enter Panel Settings and edited the panel width field with backspaces.", "intent": "Configure materials and panel dimensions for the floor generator.", "app": "SketchUp", "details": "Material Selection displayed a material name ending in \u201cree_Complexion_2\u201d; panel settings showed width 80 cm, height 160 cm, thickness 9 mm, and spacing 3 mm."}, {"start_s": 19272.669, "end_s": 19286.744, "action": "Entered panel settings values, replacing fields with 60, 90, 6, and 2, then clicked through the dialog controls.", "intent": "Configure panel dimensions and spacing.", "app": "SketchUp", "details": "The Enter Panel Settings dialog was visible with fields for panel width, height, thickness, and spacing."}, {"start_s": 19286.744, "end_s": 19295.977, "action": "Returned to the SketchUp model and navigated the camera with middle-clicks and scroll gestures, moving from an overhead house view to a close view of the tiled floor.", "intent": "Inspect the modeled floor and panel layout from different viewpoints.", "app": "SketchUp", "details": "The brown tiled floor and adjacent house geometry remained visible while the view zoomed and panned."}, {"start_s": 19295.977, "end_s": 19306.096, "action": "Continued orbiting and zooming around the model with middle-clicks and scroll gestures, briefly inspecting the tiled floor and surrounding house geometry before pulling back to a wider view.", "intent": "Review the model from multiple angles.", "app": "SketchUp", "details": "The camera moved between close floor-level views and a wider view showing the house model and neighboring structure."}, {"start_s": 19306.096, "end_s": 19316.052, "action": "Navigated extensively around the model with scroll and middle-click orbit gestures, moving from a close-up of floor seams to an underside and exterior view.", "intent": "Inspect floor and building geometry from low and underside viewpoints.", "app": "SketchUp", "details": "The camera ended beneath the brown tiled surface, with sky and building elements visible."}, {"start_s": 19316.052, "end_s": 19326.252, "action": "Continued orbiting and scrolling beneath the model, inspecting the underside of the tiled floor and nearby stair and wall geometry from several low angles.", "intent": "Examine underside construction and surrounding geometry.", "app": "SketchUp", "details": "The stairwell and underside floor panels were visible as the camera shifted laterally."}, {"start_s": 19326.252, "end_s": 19336.356, "action": "Orbited and zoomed farther beneath the structure, then made several left-clicks and short drags on the underside geometry.", "intent": "Inspect and possibly select underside floor elements.", "app": "SketchUp", "details": "The view remained inverted beneath the model, showing brown and gray underside surfaces, edges, and building geometry."}, {"start_s": 19336.356, "end_s": 19347.225, "action": "Typed a character, scrolled repeatedly, and clicked and dragged on the underside of the modeled structure while the Push/Pull tool remained active, changing the camera/view and displayed distance.", "intent": "Adjust the modeled face or inspect the underside geometry.", "app": "SketchUp 2026", "details": "The view remained focused on large underside faces and edges."}, {"start_s": 19347.225, "end_s": 19357.273, "action": "Clicked and dragged across the underside face, used middle-mouse navigation, and scrolled to orbit and reposition the model; the Push/Pull tool stayed active and the view shifted to a sloped corner face.", "intent": "Inspect and navigate around the selected architectural geometry.", "app": "SketchUp 2026", "details": "The visible face became stippled/selected during the operations."}, {"start_s": 19357.273, "end_s": 19367.705, "action": "Scrolled extensively, clicked and dragged on the large underside face, and used middle-mouse navigation to orbit outward; the view ended with the model seen from below and separated building sections visible.", "intent": "Review the model from different angles and inspect the underside geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active initially, then the Select tool was visible by the end."}, {"start_s": 19367.705, "end_s": 19381.217, "action": "Continued orbiting and zooming around the building model with repeated middle-mouse clicks and scrolls, briefly dragged on a surface, and ended with a wider overhead view of floor plans and tiled areas before switching to Windows Explorer.", "intent": "Navigate and review the architectural model.", "app": "SketchUp 2026", "details": "The final SketchUp view showed a small furnished plan and another building section."}, {"start_s": 19381.217, "end_s": 19390.515, "action": "Switched to Microsoft Edge, opened a new tab, and entered the search text \"parking tiles\" into the address bar.", "intent": "Search the web for parking tile information or examples.", "app": "Microsoft Edge", "details": "The prior Edge tab showed Bing results for \"sg floor generator free download\"."}, {"start_s": 19390.515, "end_s": 19400.122, "action": "Completed the search as \"parking tiles matt,\" submitted it, and switched to the Bing Images results tab; scrolled slightly through the displayed parking-tile images.", "intent": "Find visual references for parking tile designs.", "app": "Microsoft Edge", "details": "Bing showed a grid of ceramic, outdoor, and parking-floor tile images."}, {"start_s": 19400.122, "end_s": 19410.482, "action": "Resized and scrolled the Bing Images page, then clicked the search field and began editing the existing query by typing.", "intent": "Modify the image-search query.", "app": "Microsoft Edge", "details": "Bing Images showed parking-tile results with the query field active."}, {"start_s": 19410.482, "end_s": 19419.818, "action": "Deleted and typed additional query text, completing \u201cparking tiles matt treding in villa,\u201d then submitted the search.", "intent": "Search for parking tile images related to villas.", "app": "Microsoft Edge", "details": "Bing displayed image results and a correction notice for \u201cparking tile matte trending in villa.\u201d"}, {"start_s": 19419.818, "end_s": 19429.738, "action": "Scrolled through the Bing Images results to review additional parking-tile designs.", "intent": "Browse candidate parking-tile images.", "app": "Microsoft Edge", "details": "The results grid showed multiple outdoor, villa, and patterned tile images."}, {"start_s": 19429.738, "end_s": 19439.948, "action": "Scrolled and clicked an image result, opening the Bing image-detail overlay for a vitrified parking-tile design.", "intent": "Inspect a candidate tile image in detail.", "app": "Microsoft Edge", "details": "The overlay showed \u201cVitrified Parking Tiles - 400x400 mm Digital Matt Finish\u201d from indiamart.com."}, {"start_s": 19439.948, "end_s": 19458.779, "action": "Navigated through related images in the detail overlay and selected another result, opening a natural stone grey car-parking tile image.", "intent": "Compare related tile designs.", "app": "Microsoft Edge", "details": "The selected image was titled \u201cNatural Stone Grey Car Parking Tiles at Rs 260/box in Morbi.\u201d"}, {"start_s": 19458.779, "end_s": 19467.527, "action": "Opened the Save As dialog for the selected image and edited the filename field, typing a parking-tile filename before returning to the browser.", "intent": "Save the selected tile image locally.", "app": "Microsoft Edge", "details": "The Save As dialog was open on the Desktop with file type WEBP and the filename field partially edited."}, {"start_s": 19467.527, "end_s": 19472.145, "action": "Reviewed the Edge image-search page behind a Save As dialog and moved the pointer to the dialog controls without confirming the save.", "intent": "Manage an image download in the Save As dialog.", "app": "Microsoft Edge", "details": "The filename field contained \"vitrified-parking-tiles-1000x1000 (1)\" and the dialog was pointed at Desktop."}, {"start_s": 19472.145, "end_s": 19476.512, "action": "Reviewed the Save As dialog with the filename \"flower-printed-wall-tiles-500x500\", then clicked the dialog controls and returned to the Edge image-search page.", "intent": "Prepare or cancel saving a selected image.", "app": "Microsoft Edge", "details": "The Save As dialog remained open with Save and Cancel buttons visible."}, {"start_s": 19476.512, "end_s": 19480.685, "action": "Switched from Edge to SketchUp, adjusted the model view with scrolling, typed \"b\", and enlarged the SketchUp window.", "intent": "Return to the architectural model and adjust its view.", "app": "SketchUp", "details": "The view showed a house model with a brown tiled floor area and another model at right."}, {"start_s": 19480.685, "end_s": 19486.579, "action": "Opened SketchUp's Create Material dialog and then opened the Choose Image file picker.", "intent": "Create a material using an image texture.", "app": "SketchUp", "details": "Create Material showed Material1 with the texture-image option; Choose Image was opened to Desktop."}, {"start_s": 19486.579, "end_s": 19495.493, "action": "Left the SketchUp image picker and opened Desktop in File Explorer, then selected and dragged among the visible image files.", "intent": "Locate an image file for the SketchUp material.", "app": "Windows File Explorer", "details": "Desktop showed files including tile, parking tile, and flower-printed-wall-tiles-500x500."}, {"start_s": 19495.493, "end_s": 19503.656, "action": "Opened the flower-printed-wall-tiles-500x500.webp file in Photos and waited for the image editor preview to load.", "intent": "Inspect the selected texture image before using or saving it.", "app": "Microsoft Photos", "details": "The Photos editor displayed the dark patterned tile image with editing controls and a Save options button."}, {"start_s": 19503.656, "end_s": 19518.291, "action": "Edited the image filename in the Save As dialog to \u201cparking tile 11\u201d and initiated the save, leaving the JPEG save dialog visible.", "intent": "Save the parking tile image with a descriptive filename.", "app": "Windows Photos", "details": "The Save As dialog was open on the Desktop and showed the filename \u201cparking tile 11\u201d with JPEG format."}, {"start_s": 19518.291, "end_s": 19525.523, "action": "Viewed the saved \u201cparking tile 11.jpg\u201d image, switched back to SketchUp, and opened the Create Material workflow.", "intent": "Inspect the saved tile image and prepare a SketchUp material.", "app": "SketchUp", "details": "SketchUp displayed the Create Material dialog over the model."}, {"start_s": 19525.523, "end_s": 19535.269, "action": "Opened the Choose Image dialog, selected the \u201cparking tile 11\u201d image, confirmed it, and returned to SketchUp with the patterned texture loaded into Material1.", "intent": "Use the saved tile image as a material texture.", "app": "SketchUp", "details": "The Materials tray preview changed to the gray patterned tile image."}, {"start_s": 19535.269, "end_s": 19544.638, "action": "Selected faces in the model and painted them with the new patterned material, then navigated and zoomed around the tiled floor to inspect the result.", "intent": "Apply the parking tile texture to model surfaces.", "app": "SketchUp", "details": "Several floor tiles visibly changed from brown to the gray repeating pattern."}, {"start_s": 19544.638, "end_s": 19554.806, "action": "Edited the material texture dimensions in the Materials tray, entering 2 inches for the visible size field and applying the change while inspecting the model.", "intent": "Adjust the scale of the applied tile texture.", "app": "SketchUp", "details": "The Edit panel showed \u201cparking tile 11.jpg\u201d and a 2-inch texture dimension."}, {"start_s": 19554.806, "end_s": 19564.678, "action": "Set the texture dimensions to 2 inches by 3 inches, navigated the model, and inspected the resized patterned tiles on the floor.", "intent": "Refine the texture proportions and verify the updated material.", "app": "SketchUp", "details": "The Edit panel displayed 2-inch and 3-inch dimensions, and the patterned tile area remained visible on the model."}, {"start_s": 19564.678, "end_s": 19574.809, "action": "Clicked and dragged across multiple floor tiles to apply the patterned parking-tile material, extending the textured area across the upper rows.", "intent": "Apply the selected parking-tile material to additional floor faces.", "app": "SketchUp 2026", "details": "Materials tray showed Material1 using parking tile 11.jpg."}, {"start_s": 19574.809, "end_s": 19585.338, "action": "Scrolled and clicked or dragged across more floor faces, expanding the patterned material over the left and central portions of the tiled area.", "intent": "Continue painting the floor with the selected material.", "app": "SketchUp 2026", "details": "The patterned region visibly grew while brown unpainted tiles remained on the right and lower areas."}, {"start_s": 19585.338, "end_s": 19595.06, "action": "Scrolled and continued clicking and dragging across the floor, covering most remaining visible brown tiles with the patterned material.", "intent": "Finish applying the material across the floor surface.", "app": "SketchUp 2026", "details": "The view changed from a wider floor perspective to a close view of the nearly fully patterned surface."}, {"start_s": 19595.06, "end_s": 19604.968, "action": "Clicked and dragged over the remaining visible floor faces, then zoomed or orbited out to review the completed patterned floor in the building model.", "intent": "Complete and inspect the floor-material application.", "app": "SketchUp 2026", "details": "The final view showed the rectangular floor area uniformly covered with the repeating pattern."}, {"start_s": 19604.968, "end_s": 19616.61, "action": "Dragged and scrolled to orbit and review the completed floor from several angles, then switched to the SketchUp window titled Floor Generator and viewed the model from an exterior angle.", "intent": "Inspect the finished floor and move to the related SketchUp window.", "app": "SketchUp 2026", "details": "An app switch to the Floor Generator window occurred at the end of the span."}, {"start_s": 19616.61, "end_s": 19626.612, "action": "Switched back to the g+3 SketchUp model, then used middle-button orbiting and scrolling to inspect the patterned floor, entry tiles, walls, and staircase from multiple viewpoints.", "intent": "Review the completed flooring and surrounding model geometry.", "app": "SketchUp 2026", "details": "The camera moved from the patterned exterior floor toward the tiled entry and staircase."}, {"start_s": 19626.612, "end_s": 19637.12, "action": "Adjusted the SketchUp camera with middle-button navigation and scrolling, then opened the Camera menu and moved through its view options.", "intent": "Navigate and inspect the 3D model from different camera views.", "app": "SketchUp 2026", "details": "The Camera menu was open near the end of the span, showing view and navigation commands."}, {"start_s": 19637.12, "end_s": 19647.076, "action": "Orbited and zoomed extensively around the model with middle-button navigation and scrolling, moving from an overhead building view to a close view of floor and edge geometry.", "intent": "Inspect the model geometry from close and varied angles.", "app": "SketchUp 2026", "details": "The view became highly zoomed toward a floor edge and textured surface."}, {"start_s": 19647.076, "end_s": 19656.934, "action": "Continued navigating the close-up model view with scrolling and middle-button camera movement, typed brief shortcut keys, and clicked near the floor edge, leaving selected geometry outlined in blue.", "intent": "Inspect and select floor or edge geometry.", "app": "SketchUp 2026", "details": "A large textured surface and adjacent gray face remained in close view."}, {"start_s": 19656.934, "end_s": 19666.86, "action": "Typed a shortcut, clicked the model, and continued scrolling while using the Push/Pull tool on the floor-edge area; the visible distance readout changed as the view and tool position moved.", "intent": "Modify or inspect the thickness of the selected model face.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and displayed distance values including approximately 3/16 inch and 2 3/4 inches."}, {"start_s": 19666.86, "end_s": 19677.64, "action": "Orbited and scrolled across the tiled floor and surrounding walls, repeatedly repositioning the camera to inspect different floor intersections and perimeter edges.", "intent": "Review the floor layout and edge geometry from multiple angles.", "app": "SketchUp 2026", "details": "The view shifted from a floor corner to a low, oblique view along a brown-edged textured surface."}, {"start_s": 19677.64, "end_s": 19687.759, "action": "Continued orbiting and scrolling along the textured floor perimeter, clicked the edge repeatedly, typed a shortcut, and left a long edge selected in blue.", "intent": "Inspect and select the floor boundary geometry.", "app": "SketchUp 2026", "details": "The final view showed the textured floor beside a gray face with a blue-highlighted edge."}, {"start_s": 19687.759, "end_s": 19698.175, "action": "Navigated around the SketchUp model with middle-button orbiting and scrolling, briefly used Push/Pull, and changed from a close-up floor view to a wider view of the building model.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 19698.175, "end_s": 19708.47, "action": "Orbited and zoomed through the building interior, moving from an exterior view into tiled corridors and rooms; clicked and briefly dragged while adjusting the camera.", "intent": "Inspect interior floor and wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 19708.47, "end_s": 19718.662, "action": "Continued orbiting and scrolling around the model, passing through close views of tiled floors and walls, then revealed a top-down view of the stair area and adjacent corridor.", "intent": "Review the building layout from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 19718.662, "end_s": 19729.612, "action": "Adjusted the camera with orbiting, scrolling, clicks, and short drags, changing from an angled corridor view to an overhead view of the stairwell, tiled areas, and surrounding rooms.", "intent": "Examine the stairwell and nearby geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 19729.612, "end_s": 19739.858, "action": "Scrolled and orbited toward a close-up floor surface, clicked repeatedly near the model edge, and activated Push/Pull on a selected face; the view ended on a textured floor and adjacent slab edge.", "intent": "Inspect or prepare to modify a floor face.", "app": "SketchUp 2026", "details": null}, {"start_s": 19739.858, "end_s": 19749.876, "action": "Continued navigating with scrolling and orbiting, briefly interacted with model faces, then zoomed out substantially to show two separated building-layout groups in the SketchUp workspace.", "intent": "Review the overall model arrangement after close inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 19749.876, "end_s": 19759.731, "action": "Scrolled and clicked repeatedly in the SketchUp model, navigating the camera around the tiled floor and wall structure.", "intent": "Inspect or reposition the 3D model view.", "app": "SketchUp", "details": null}, {"start_s": 19759.731, "end_s": 19769.223, "action": "Clicked and dragged within the model while scrolling, orbiting and repositioning the view around the walls, stairs, and tiled floor.", "intent": "Inspect the modeled interior from different angles.", "app": "SketchUp", "details": null}, {"start_s": 19769.223, "end_s": 19783.185, "action": "Dragged and clicked around the model, adjusted the view, then opened the View menu and navigated to the Toolbars option.", "intent": "Inspect the model and access toolbar settings.", "app": "SketchUp", "details": "The View menu was open with Toolbars visible."}, {"start_s": 19783.185, "end_s": 19788.215, "action": "Opened the Toolbars dialog and switched toolbar selections, including Floor Generator, while toggling between SketchUp windows.", "intent": "Configure visible SketchUp toolbars.", "app": "SketchUp", "details": "The Toolbars dialog showed toolbar checkboxes, including Camera, Floor Generator, and Getting Started."}, {"start_s": 19788.215, "end_s": 19793.363, "action": "Closed or switched away from the toolbar dialog, triggered the Floor Generator tool, and received a warning that a single face must be selected before running it.", "intent": "Attempt to run Floor Generator on the model.", "app": "SketchUp", "details": "A SketchUp warning stated: \u201cPlease select a single face before running the tool.\u201d"}, {"start_s": 19793.363, "end_s": 19808.756, "action": "Opened Material Selection, confirmed the material field, then edited the Enter Panel Settings fields, entering 20 for panel width and 30 for another setting while leaving the dialog open.", "intent": "Configure floor-generator panel material and dimensions.", "app": "SketchUp", "details": "The settings dialog visibly showed panel width 20 cm, panel height 160 cm, panel thickness 9 mm, and spacing 3 mm."}, {"start_s": 19808.756, "end_s": 19821.527, "action": "Switched to SketchUp, orbited and zoomed around the interior architectural model, then clicked within the model and adjusted the view further.", "intent": "Inspect and navigate the 3D building model.", "app": "SketchUp", "details": null}, {"start_s": 19821.527, "end_s": 19831.845, "action": "Dismissed the SketchUp warning stating that a single face must be selected before running the tool, then continued orbiting and zooming around the model.", "intent": "Attempt to run a modeling tool and inspect the resulting model view.", "app": "SketchUp", "details": "A warning dialog reported that a single face was required."}, {"start_s": 19831.845, "end_s": 19842.013, "action": "Clicked repeatedly on the model, typed a tool shortcut, and used the active push/pull tool on a large textured face, changing the displayed distance while adjusting the view.", "intent": "Modify or measure a selected face with SketchUp's push/pull operation.", "app": "SketchUp", "details": "The status bar showed push/pull controls and changing distance values."}, {"start_s": 19842.013, "end_s": 19852.021, "action": "Scrolled and orbited closely around the textured surface, clicked the face and its edges, and repositioned the camera to a low angled view of the large slab.", "intent": "Inspect the textured surface and surrounding geometry.", "app": "SketchUp", "details": null}, {"start_s": 19852.021, "end_s": 19862.484, "action": "Selected and manipulated the textured slab with clicks, a drag, and push/pull-related keyboard input, then orbited and zoomed toward adjacent floor and wall geometry.", "intent": "Continue editing or inspecting the slab and nearby model faces.", "app": "SketchUp", "details": "The push/pull tool remained active and the slab edge was highlighted during manipulation."}, {"start_s": 19862.484, "end_s": 19871.891, "action": "Zoomed and orbited into the tiled interior, clicked a floor face, and left the camera focused on the floor and wall junction with a blue highlighted edge visible.", "intent": "Inspect or select interior floor geometry.", "app": "SketchUp", "details": "The view ended close to beige tiled faces beside a gray wall."}, {"start_s": 19871.891, "end_s": 19891.246, "action": "Navigated the SketchUp model with repeated middle-button clicks and scrolls, moving from an exterior view of the tiled floor and rooms toward a closer floor-level view.", "intent": "Inspect the floor and adjacent room layout in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 19891.246, "end_s": 19900.915, "action": "Continued orbiting and zooming the SketchUp model, transitioning from the tiled exterior view to an overhead view of rooms, furniture, and the stairwell.", "intent": "Review the building layout from above.", "app": "SketchUp 2026", "details": null}, {"start_s": 19900.915, "end_s": 19909.95, "action": "Orbited and zoomed farther out through the model, revealing multiple rooms, doors, furniture, stairs, and surrounding building sections before reaching a broad overview.", "intent": "Inspect the overall arrangement of the modeled spaces.", "app": "SketchUp 2026", "details": null}, {"start_s": 19909.95, "end_s": 19920.009, "action": "Adjusted the camera around the broad model overview, then zoomed toward the central rooms and stairwell for a closer overhead inspection.", "intent": "Examine the relationship between the rooms and staircase.", "app": "SketchUp 2026", "details": null}, {"start_s": 19920.009, "end_s": 19924.695, "action": "Zoomed and orbited into a close view of the stairwell, adjacent corridor, elevator-like enclosure, and nearby doors.", "intent": "Inspect the stair and circulation details.", "app": "SketchUp 2026", "details": null}, {"start_s": 19924.695, "end_s": 19944.695, "action": "Paused on the SketchUp model and made a few scroll and middle-button adjustments, leaving an overhead view centered on the stairwell and surrounding living and dining areas.", "intent": "Continue reviewing the central floor-plan geometry and circulation.", "app": "SketchUp 2026", "details": null}, {"start_s": 19944.695, "end_s": 19954.192, "action": "Navigated around the SketchUp house model with repeated middle-click orbiting and scroll-based zooming, shifting from an angled overall floor-plan view to a more top-down view of the rooms and stairs.", "intent": "Inspect the modeled floor plan from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 19954.192, "end_s": 19961.957, "action": "Continued zooming and orbiting the model, pulling back to show the full house footprint and adjacent tiled area in the SketchUp workspace.", "intent": "Review the overall layout and surrounding modeled area.", "app": "SketchUp 2026", "details": null}, {"start_s": 19961.957, "end_s": 19971.981, "action": "Zoomed and orbited around the model, then activated the Orbit tool and adjusted the view to a closer angled inspection of the upper bedrooms, bathroom, dining area, and living room.", "intent": "Examine the house interior arrangement from an angled perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 19971.981, "end_s": 19981.489, "action": "Used the active Orbit tool and repeated scroll movements to rotate and reposition the view, moving from the interior floor plan toward a wider view of the separate house sections and tiled ground area.", "intent": "Compare the model sections and site surface from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 19981.489, "end_s": 19992.463, "action": "Continued orbiting and zooming around the model, bringing the tiled ground and exterior walls closer until the patterned tile surface filled much of the view.", "intent": "Inspect the exterior and tiled surface details.", "app": "SketchUp 2026", "details": null}, {"start_s": 19992.463, "end_s": 20002.345, "action": "Zoomed and orbited from the tiled surface toward the stairwell and adjacent rooms, ending on a close angled view of the staircase, corridor, walls, and part of the living area.", "intent": "Inspect the stair and adjoining interior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 20002.345, "end_s": 20012.692, "action": "Scrolled repeatedly to navigate the SketchUp model, middle-clicked to adjust the view, and typed \u201cr\u201d near the end of the interval.", "intent": "Navigate and inspect different areas of the 3D house model.", "app": "SketchUp 2026", "details": "The view changed from an overview of two building sections to a closer view of the floor plan."}, {"start_s": 20012.692, "end_s": 20023.015, "action": "Selected a drawing tool with left clicks, zoomed and repositioned the model through repeated scrolling, then middle-clicked to adjust the view and entered two keystrokes.", "intent": "Inspect and work on geometry around the upper floor rooms.", "app": "SketchUp 2026", "details": "A close-up floor-plan view showed bedrooms and adjacent spaces with drawing-tool endpoints visible."}, {"start_s": 20023.015, "end_s": 20033.173, "action": "Scrolled and middle-clicked to reposition the model, then continued navigating around the floor plan while a line or edge remained active.", "intent": "Inspect or modify selected edges around the bedrooms and bathroom.", "app": "SketchUp 2026", "details": "Blue highlighted edges and a constrained drawing endpoint were visible around the lower bedrooms."}, {"start_s": 20033.173, "end_s": 20043.588, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom across the bedroom area, then made another middle-click adjustment.", "intent": "Refine the 3D view while inspecting the bedroom and bathroom geometry.", "app": "SketchUp 2026", "details": "The view moved from a wider bedroom layout to a closer angled view of two bedrooms, a bathroom, doors, and windows."}, {"start_s": 20043.588, "end_s": 20054.94, "action": "Middle-clicked and zoomed into the bedroom and doorway area, then performed an extended scrolling sequence that brought the camera very close to the model.", "intent": "Examine detailed geometry around the bedroom door, window, and wall edges.", "app": "SketchUp 2026", "details": "The final view was a close-up of a wooden door, window, and blue-highlighted edge with an \u201cEndpoint in Group\u201d tooltip."}, {"start_s": 20054.94, "end_s": 20065.299, "action": "Scrolled extensively, clicked twice to activate or select the drawing tool, continued zooming and orbiting, typed a space, and middle-clicked to change the camera view.", "intent": "Navigate from the close-up doorway detail to another section of the house model.", "app": "SketchUp 2026", "details": "The view shifted from the door and window close-up to an angled interior view beside the stairs and adjacent rooms."}, {"start_s": 20065.299, "end_s": 20075.478, "action": "Selected a wall or face and navigated around the stairwell area with clicks, scrolling, and a brief text input; left a rectangular face active in the SketchUp model.", "intent": "Inspect or modify geometry near the stairwell.", "app": "SketchUp 2026", "details": "A rectangular wall or face remained highlighted with purple edges."}, {"start_s": 20075.478, "end_s": 20085.129, "action": "Navigated the 3D view with repeated middle-clicks and scrolling, moving from the selected face to an overhead view of the stairs and adjacent walls.", "intent": "Review the stairwell model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20085.129, "end_s": 20094.908, "action": "Clicked repeatedly along the stair area and briefly dragged across the model while continuing to adjust the view; changed the visible stair geometry or selection so the stair lines disappeared by the end.", "intent": "Inspect or manipulate stair components.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the stairwell without the earlier interior stair lines."}, {"start_s": 20094.908, "end_s": 20104.912, "action": "Navigated away from the close-up with scrolling, middle-clicks, and drags, then zoomed out to an overhead view showing the broader house layout and multiple stair sections.", "intent": "Review the overall building model and stair placement.", "app": "SketchUp 2026", "details": "The model was viewed from progressively wider overhead perspectives."}, {"start_s": 20104.912, "end_s": 20115.174, "action": "Continued orbiting and zooming out through the model, transitioning from the house interior to a distant view of two building layouts, then zoomed toward the left layout and its tiled stair area.", "intent": "Compare or inspect the building layouts and stair design.", "app": "SketchUp 2026", "details": "The view ended over the left structure, showing tiled flooring and a central stairwell."}, {"start_s": 20115.174, "end_s": 20125.253, "action": "Navigated with middle-clicks and scrolling between wide and closer views, ending on a close overhead view of the stairwell, surrounding walls, and adjacent rooms.", "intent": "Inspect the stairwell and surrounding floor plan.", "app": "SketchUp 2026", "details": "The final view centered on the stair opening and two adjoining flights of stairs."}, {"start_s": 20125.253, "end_s": 20134.722, "action": "Orbited and scrolled through the SketchUp building model, then switched to the Eraser tool and dragged across visible floor and wall geometry.", "intent": "Inspect and modify model geometry from a close perspective.", "app": "SketchUp 2026", "details": "The view changed from a tight wall-and-floor perspective to a wider floor view with the Eraser tool active."}, {"start_s": 20134.722, "end_s": 20144.791, "action": "Navigated around the model with orbit and scroll gestures, then changed to an orbit-oriented view showing the building layout, rooms, doors, windows, and stairs from above.", "intent": "Review the overall building layout from multiple viewpoints.", "app": "SketchUp 2026", "details": "The model ended in a rotated overhead view with separated building sections visible."}, {"start_s": 20144.791, "end_s": 20154.685, "action": "Orbited and zoomed through close interior views, clicked around model geometry, and ended with the camera moved away to a mostly empty view containing a single slanted edge.", "intent": "Inspect interior geometry and reposition the camera.", "app": "SketchUp 2026", "details": "No definite geometry change is visible; the final view is largely blank."}, {"start_s": 20154.685, "end_s": 20166.226, "action": "Navigated back to the building, selected wall and room geometry, and adjusted the view around the stairwell and adjacent rooms; the selected geometry became highlighted and then displayed with selection transparency.", "intent": "Select and inspect a building section around the stairs.", "app": "SketchUp 2026", "details": "A large wall/room group was outlined in blue and later shown semi-transparent while selected."}, {"start_s": 20166.226, "end_s": 20176.109, "action": "Adjusted the camera around the selected stairwell area, clicked and dragged across the model, and switched to the Eraser tool while zooming toward the lower stair and floor geometry.", "intent": "Inspect and potentially edit stairwell and floor elements.", "app": "SketchUp 2026", "details": "The final view is a close-up of the stair landing and floor with the Eraser tool active."}, {"start_s": 20176.109, "end_s": 20186.408, "action": "Scrolled and repositioned the camera around the stairwell, clicked the lower floor area, then dragged the Eraser tool across geometry beneath the stairs.", "intent": "Erase or inspect stair and floor components from a close perspective.", "app": "SketchUp 2026", "details": "The view ended underneath the stairs with floor lines and stair surfaces visible."}, {"start_s": 20186.408, "end_s": 20196.376, "action": "Opened and dismissed the Edit menu while manipulating the SketchUp model, then left the multi-room building visible in an oblique overview.", "intent": "Inspect the architectural model and access editing commands.", "app": "SketchUp 2026", "details": "The Edit menu was open briefly and then closed; no clear geometry change was visible."}, {"start_s": 20196.376, "end_s": 20205.628, "action": "Opened the Edit menu, clicked in the model area, and issued repeated undo-like keyboard commands while the building overview remained visible.", "intent": "Revert or review recent model operations.", "app": "SketchUp 2026", "details": "The menu showed \u201cUndo Unhide,\u201d but no definite resulting geometry change was visible."}, {"start_s": 20205.628, "end_s": 20216.04, "action": "Selected a section of the building, navigated toward the central stair area, and zoomed in until the stairs and adjacent entrance were shown closely.", "intent": "Inspect the central stair and entrance geometry.", "app": "SketchUp 2026", "details": "The model ended in a close view of the staircase, landing, doors, and adjacent floor."}, {"start_s": 20216.04, "end_s": 20225.892, "action": "Continued navigating around the stair area with orbiting and zooming, used the Eraser tool over the floor and stair region, and then opened the Edit menu in a wider model view.", "intent": "Inspect or possibly remove selected architectural elements.", "app": "SketchUp 2026", "details": "The Eraser tool was active during the close-up; the final view showed the broader building with no confirmed deletion."}, {"start_s": 20225.892, "end_s": 20235.692, "action": "Orbited and zoomed around the building, changing from an oblique interior view to a higher top-down view of rooms, stairs, bathrooms, and furnishings.", "intent": "Review the building layout from different viewpoints.", "app": "SketchUp 2026", "details": "Navigation used middle-button orbiting and scroll zooming; no clear geometry edits were visible."}, {"start_s": 20235.692, "end_s": 20244.785, "action": "Continued orbiting and zooming over the architectural model, moving from a close stair and elevator-area view to a high overview of the full floor layout.", "intent": "Inspect the interior arrangement and circulation layout.", "app": "SketchUp 2026", "details": "The final view showed the overall floor plan with rooms, stairs, doors, windows, bathrooms, and furniture."}, {"start_s": 20244.785, "end_s": 20255.212, "action": "Orbited and zoomed out from a close interior view to compare two building models in the SketchUp workspace.", "intent": "Review the 3D building layout from a wider perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 20255.212, "end_s": 20264.94, "action": "Orbited and zoomed around the main building, moving from an overhead floor-plan view into a closer angled view of rooms, stairs, doors, and windows.", "intent": "Inspect the building interior and circulation areas.", "app": "SketchUp 2026", "details": null}, {"start_s": 20264.94, "end_s": 20274.943, "action": "Rotated and zoomed the camera across the model, shifting from a broad view of the full building to a closer view of bedrooms, living areas, bathrooms, and exterior walls.", "intent": "Review different sections of the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20274.943, "end_s": 20284.862, "action": "Zoomed and orbited away from the close interior view, briefly showing a blank area, then reframed both building models side by side.", "intent": "Reposition the camera for an overall comparison of the models.", "app": "SketchUp 2026", "details": null}, {"start_s": 20284.862, "end_s": 20295.337, "action": "Orbited and zoomed around the larger building model, inspecting its upper rooms and stairwell before returning to a wider view containing both models.", "intent": "Compare the building designs from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 20295.337, "end_s": 20305.071, "action": "Zoomed toward the larger model and orbited into a closer overhead view of the living room, dining table, surrounding rooms, and stairs; selected or highlighted several floor surfaces during the inspection.", "intent": "Examine interior spaces and floor geometry in the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20305.071, "end_s": 20314.592, "action": "Navigated around the SketchUp 3D house model by clicking, scrolling, and orbiting/zooming, moving from a close interior view to a wider view of the modeled rooms.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20314.592, "end_s": 20324.609, "action": "Continued orbiting, panning, and zooming through the model, inspecting a narrow interior area and adjacent furnished rooms while selecting visible geometry.", "intent": "Examine model geometry and room layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 20324.609, "end_s": 20334.342, "action": "Activated a drawing tool and clicked points around the narrow exterior/interior strip, creating or sizing a rectangular outline while navigating the view.", "intent": "Draw or define a rectangular model element.", "app": "SketchUp 2026", "details": "The active tool displayed a rectangle-like outline with dimension readouts."}, {"start_s": 20334.342, "end_s": 20344.479, "action": "Orbit-panned around the outlined strip and clicked its geometry; pressed Space and an undo keystroke while leaving a long edge visibly highlighted.", "intent": "Inspect or adjust the newly drawn geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 20344.479, "end_s": 20354.797, "action": "Selected and dragged along the long edge of the strip, then navigated the view and continued drawing or sizing the element with the active drawing tool.", "intent": "Refine the dimensions or placement of the model element.", "app": "SketchUp 2026", "details": "The edge changed from blue selection to green inference highlighting and dimension readouts remained visible."}, {"start_s": 20354.797, "end_s": 20364.728, "action": "Continued the drawing operation by clicking and typing while positioning the endpoint along the strip; left a red constrained edge and endpoint visible near the corner.", "intent": "Set or constrain the final endpoint of the drawn geometry.", "app": "SketchUp 2026", "details": "A tooltip indicated the point was constrained on a plane."}, {"start_s": 20364.728, "end_s": 20374.892, "action": "Navigated around the SketchUp architectural model with repeated middle-button orbiting, scrolling, and clicks, changing from a close view of a courtyard and building surfaces to another angled section.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20374.892, "end_s": 20394.461, "action": "Continued orbiting and zooming around the model, entered brief keyboard input, and ended on a zoomed-out view showing two building floor-plan sections.", "intent": "Review the model layout and reposition the camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 20394.461, "end_s": 20404.03, "action": "Switched away and back to SketchUp, then used the active drawing tool with clicks, scrolling, and orbiting to reposition the view over the courtyard and adjacent rooms.", "intent": "Continue editing or inspecting geometry in the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20404.03, "end_s": 20413.43, "action": "Clicked and navigated through the model with scrolling and middle-button orbiting; the view shifted across the courtyard and building interiors, and a surface became visibly selected near the end.", "intent": "Inspect and possibly select a model surface.", "app": "SketchUp 2026", "details": null}, {"start_s": 20413.43, "end_s": 20422.848, "action": "Continued orbiting and zooming around the courtyard edge, clicked several locations, entered a brief character, and left the drawing tool active while focusing on a narrow wall or edge detail.", "intent": "Refine the view and work on a small architectural detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 20422.848, "end_s": 20432.587, "action": "Navigated through close-up geometry with scrolling, clicks, and brief keyboard input, then zoomed and orbited out to reveal both building floor-plan models in a wider view.", "intent": "Review the edited area in the context of the overall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20432.587, "end_s": 20442.533, "action": "Navigated through the SketchUp house model with repeated middle-click orbiting and scroll zooming, moving from a broad multi-room view to a close-up of a bedroom and adjacent bathroom.", "intent": "Inspect different areas of the 3D house model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20442.533, "end_s": 20452.056, "action": "Continued orbiting and zooming through the model, shifting from a close-up doorway and wall view to an extremely close view of interior surfaces and room edges.", "intent": "Continue inspecting the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20452.056, "end_s": 20462.431, "action": "Orbited and zoomed back out through the house, revealing bedrooms, bathrooms, the dining area, stairs, and living room in successive overhead perspectives.", "intent": "Review the overall house layout and room arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 20462.431, "end_s": 20472.127, "action": "Selected the Line tool, clicked repeatedly around a narrow exterior area, typed \u201cr,\u201d and dragged to begin or adjust a line while orbiting around the balcony or walkway.", "intent": "Create or modify geometry along the exterior area.", "app": "SketchUp 2026", "details": "The Line tool remained active and displayed an in-progress dimensioned segment."}, {"start_s": 20472.127, "end_s": 20483.24, "action": "Typed \u201cr,\u201d clicked the narrow exterior region, and continued zooming and repositioning the view while drawing or adjusting a long rectangular outline around the walkway.", "intent": "Continue constructing or editing the exterior geometry.", "app": "SketchUp 2026", "details": "A long face or boundary was highlighted in blue, with dimension readouts visible."}, {"start_s": 20483.24, "end_s": 20493.011, "action": "Continued the active drawing operation with keyboard input, clicked near the lower-right endpoint, scrolled slightly, and entered spaces while the outlined exterior face remained selected.", "intent": "Finalize or adjust the in-progress geometry.", "app": "SketchUp 2026", "details": "The endpoint tooltip indicated \u201cEndpoint Outside Active,\u201d and the dimension field remained visible."}, {"start_s": 20493.011, "end_s": 20503.287, "action": "Selected the narrow corner area and adjusted a rectangular element around the plant graphic, entering small keyboard inputs while setting its dimensions.", "intent": "Refine the size and placement of a small modeled element at the corner.", "app": "SketchUp 2026", "details": "The rectangle tool remained active and the dimensions field changed during the adjustments."}, {"start_s": 20503.287, "end_s": 20514.185, "action": "Continued adjusting the corner rectangle with clicks, keyboard inputs, and view scrolling; then returned to selection mode with the element positioned around the plant graphic.", "intent": "Fine-tune the modeled corner element and inspect its placement.", "app": "SketchUp 2026", "details": "The view zoomed and shifted while the rectangle dimensions were edited."}, {"start_s": 20514.185, "end_s": 20522.393, "action": "Scrolled and clicked around the selected corner element, making further dimension adjustments before leaving the narrow rectangle selected.", "intent": "Continue refining the geometry at the corner.", "app": "SketchUp 2026", "details": "The rectangle remained selected with dimension readouts visible."}, {"start_s": 20522.393, "end_s": 20532.244, "action": "Scrolled and navigated away from the close-up, then zoomed out to inspect the broader building model and its corner area.", "intent": "Review the edited element in the context of the larger model.", "app": "SketchUp 2026", "details": "The final view showed a wider architectural scene with the edited lower corner visible."}, {"start_s": 20532.244, "end_s": 20541.628, "action": "Zoomed back into the plant and adjacent wall, clicked and dragged near the wall edge, and selected a long narrow edge or face for further editing.", "intent": "Inspect and select adjacent geometry for continued modeling.", "app": "SketchUp 2026", "details": "The view changed from the broad model to a close-up of the plant and wall junction."}, {"start_s": 20541.628, "end_s": 20551.005, "action": "Scrolled around the close-up and continued working on the selected narrow wall-side element, with brief keyboard inputs and a final view showing the rectangular feature beside the plant.", "intent": "Refine and verify the selected corner feature.", "app": "SketchUp 2026", "details": "The narrow element remained highlighted while the camera shifted around the corner."}, {"start_s": 20551.005, "end_s": 20560.617, "action": "Navigated around the SketchUp model with repeated scrolls, clicks, and a brief drag, changing from a close interior view to an overhead view of the room and adjacent structure.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20560.617, "end_s": 20570.755, "action": "Scrolled and adjusted the view, selected a long rectangular floor or surface region, and then cleared the selection while continuing to inspect the room.", "intent": "Select and review a model surface.", "app": "SketchUp 2026", "details": "The selected rectangular region was visible along the narrow room beside the door and plants."}, {"start_s": 20570.755, "end_s": 20580.904, "action": "Clicked and adjusted the rectangular region, then scrolled and changed the view while leaving the model in an overhead perspective of the narrow room.", "intent": "Refine or inspect the rectangular model element.", "app": "SketchUp 2026", "details": "SketchUp showed drawing or selection handles and a changing dimension readout during the adjustment."}, {"start_s": 20580.904, "end_s": 20591.073, "action": "Orbit- or pan-adjusted the SketchUp camera through repeated middle-clicks and scrolls, moving from the narrow room to a broader overhead view, then clicked near the room boundary.", "intent": "Examine the room layout and surrounding geometry.", "app": "SketchUp 2026", "details": "The view revealed a door, window, ceiling or roof geometry, and plant symbols."}, {"start_s": 20591.073, "end_s": 20600.252, "action": "Scrolled and repositioned the camera, selected a large rectangular floor or surface area, and continued adjusting the view while the selection and dimension guides remained visible.", "intent": "Inspect or size a large rectangular model surface.", "app": "SketchUp 2026", "details": "A large outlined rectangle filled most of the room area in the first evidence view."}, {"start_s": 20600.252, "end_s": 20610.462, "action": "Clicked and scrolled to zoom out and reposition the model, briefly used a keyboard command, then clicked around the room boundary and ended on a wider overhead view.", "intent": "Review the adjusted room geometry in context.", "app": "SketchUp 2026", "details": "The final view showed the door, window, surrounding walls, and plant symbol without an active selection."}, {"start_s": 20610.462, "end_s": 20620.343, "action": "Scrolled and clicked around the SketchUp model, then continued drawing or adjusting a rectangular face near the doorway; the selected geometry and dimension readout remained visible.", "intent": "Refine the selected architectural geometry.", "app": "SketchUp 2026", "details": "The view showed a close-up of a doorway, ceiling fixture, and adjacent wall."}, {"start_s": 20620.343, "end_s": 20626.404, "action": "Zoomed and navigated from a plan-like overview back to the doorway area, keeping the rectangular geometry active and selected.", "intent": "Inspect the model and reposition the view for continued editing.", "app": "SketchUp 2026", "details": "The overview showed two building layouts before returning to the selected wall or floor area."}, {"start_s": 20626.404, "end_s": 20639.322, "action": "Paused with the rectangular face still selected in SketchUp and entered a single key event without a visible change.", "intent": "Continue or prepare the active geometry edit.", "app": "SketchUp 2026", "details": "The close-up remained focused on the doorway and adjacent wall."}, {"start_s": 20639.322, "end_s": 20648.625, "action": "Clicked and navigated around the model, then zoomed out to show the doorway room and surrounding structure; the visible face became unselected.", "intent": "Review the edited area in a wider architectural context.", "app": "SketchUp 2026", "details": "The model view changed from a close-up to a broader top or underside view."}, {"start_s": 20648.625, "end_s": 20658.274, "action": "Zoomed and panned into the lower corner of the room, clicked the floor or wall area repeatedly, and left a large face highlighted with a stippled selection pattern.", "intent": "Select and inspect the room surface for further editing.", "app": "SketchUp 2026", "details": "The selected face contained the visible curved door swing outline."}, {"start_s": 20658.274, "end_s": 20668.566, "action": "Navigated back to a wider room view, clicked near the lower-right corner, and continued the rectangle operation; the final view showed the corner beside the plant-like graphic with an active endpoint and dimension readout.", "intent": "Position and size additional geometry along the room boundary.", "app": "SketchUp 2026", "details": "The active tool status indicated setting the first corner, with dimensions shown as 8', 2\"."}, {"start_s": 20668.566, "end_s": 20680.533, "action": "Scrolled and orbited the SketchUp model around a small room with a door and plant, changing from a close overhead view to a wider perspective.", "intent": "Inspect the modeled room from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20680.533, "end_s": 20689.762, "action": "Scrolled and activated a drawing tool, then positioned the cursor near the right side of the doorway while the tool displayed dimensions.", "intent": "Begin or adjust geometry near the doorway.", "app": "SketchUp 2026", "details": "The drawing tool remained active with a visible dimension readout."}, {"start_s": 20689.762, "end_s": 20699.729, "action": "Orbited and zoomed toward the doorway and plant, clicked and dragged across the room area, and selected the large floor or face region.", "intent": "Navigate the model and select a room surface.", "app": "SketchUp 2026", "details": "The selected face became highlighted with a stippled overlay."}, {"start_s": 20699.729, "end_s": 20709.872, "action": "Zoomed and orbited toward the plant, then clicked repeatedly around it and selected the plant geometry, which became highlighted in blue.", "intent": "Inspect or select the plant component.", "app": "SketchUp 2026", "details": null}, {"start_s": 20709.872, "end_s": 20719.899, "action": "Clicked around the selected plant and orbited or zoomed away, returning to a wider view of the room, doorway, ceiling, and plant.", "intent": "Review the selected model area from a wider perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 20719.899, "end_s": 20728.743, "action": "Scrolled and orbited around the room, moving from a close doorway view to a wider overhead perspective that included the ceiling fixture, door, plant, and surrounding walls.", "intent": "Continue inspecting the room model from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20728.743, "end_s": 20739.003, "action": "Clicked and scrolled repeatedly to navigate the SketchUp model, changing the view from a close wall and floor area to a broader doorway and room view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20739.003, "end_s": 20749.667, "action": "Scrolled and clicked within the model, selecting the floor or room surface and zooming toward the doorway threshold.", "intent": "Inspect or select geometry around the doorway and floor.", "app": "SketchUp 2026", "details": "A large floor region appears selected with a stippled highlight before the view zooms closer to the right edge."}, {"start_s": 20749.667, "end_s": 20759.189, "action": "Scrolled and clicked around the plant and adjacent wall geometry, briefly selecting edges or faces while panning and zooming across the corner.", "intent": "Inspect the plant-area geometry and nearby wall intersection.", "app": "SketchUp 2026", "details": "The plant-like linework is shown enlarged and briefly highlighted blue."}, {"start_s": 20759.189, "end_s": 20769.181, "action": "Scrolled and used middle-click navigation to pull back to a wider room view, then clicked and adjusted geometry near the doorway and ceiling.", "intent": "Review the room layout and doorway components from a wider perspective.", "app": "SketchUp 2026", "details": "The view changes from the plant close-up to a broader overhead room view and then back toward the door."}, {"start_s": 20769.181, "end_s": 20776.994, "action": "Scrolled and clicked near the upper doorway edge, then activated a drawing tool and began drawing a rectangular element across the upper wall or door area.", "intent": "Create or modify geometry near the top of the doorway.", "app": "SketchUp 2026", "details": "The drawing tool is active with a rectangle preview and visible dimensions of approximately 9 feet by 4 feet 1 4/16 inches."}, {"start_s": 20776.994, "end_s": 20789.099, "action": "Continued the active drawing operation and positioned the opposite corner, leaving a green constrained preview line across the upper doorway area.", "intent": "Complete the in-progress geometric drawing on the model plane.", "app": "SketchUp 2026", "details": "The status bar indicates a plane-intersection constraint, and the preview remains active rather than visibly finalized."}, {"start_s": 20789.099, "end_s": 20796.686, "action": "Scrolled repeatedly while viewing the selected rectangular wall or plane in the SketchUp model.", "intent": "Adjust the model view around the selected geometry.", "app": "SketchUp 2026", "details": "The large rectangular surface remained selected and the status bar indicated a constrained plane intersection."}, {"start_s": 20796.686, "end_s": 20806.679, "action": "Clicked and scrolled around the rectangular surface, entered brief spaces, and then dragged or clicked near its upper-right area; the selection state and camera view changed.", "intent": "Inspect or modify the selected wall geometry.", "app": "SketchUp 2026", "details": "The view changed from a front view of the wall to a close, angled view with the surface highlighted."}, {"start_s": 20806.679, "end_s": 20817.43, "action": "Scrolled and clicked around the highlighted rectangular surface, typed a character, used middle-button navigation, and dragged near the lower-right corner to position or adjust geometry.", "intent": "Refine the wall or plane placement while navigating the model.", "app": "SketchUp 2026", "details": "The surface stayed highlighted with a curved edge visible; the final view showed a corner and an active drawing endpoint."}, {"start_s": 20817.43, "end_s": 20827.57, "action": "Clicked and scrolled across the wall and adjacent model geometry, entered brief spaces and a character, and used middle-button navigation to orbit the view.", "intent": "Inspect the wall in relation to surrounding architectural geometry.", "app": "SketchUp 2026", "details": "The camera moved from a close wall corner to an oblique view where the wall, snowflake-like detail, and surrounding structure were visible."}, {"start_s": 20827.57, "end_s": 20838.902, "action": "Clicked and dragged around the wall corner, entered brief spaces, then scrolled and used middle-button navigation to continue orbiting and inspecting the model.", "intent": "Navigate around and review the placement of the wall detail.", "app": "SketchUp 2026", "details": "The view remained focused on the wall corner and snowflake-like detail before shifting to a wider oblique architectural view."}, {"start_s": 20838.902, "end_s": 20848.478, "action": "Scrolled and used middle-button navigation to orbit and zoom out from the wall corner, revealing a wider overhead view of the building floor plan and multiple rooms.", "intent": "Review the overall architectural model after inspecting the wall area.", "app": "SketchUp 2026", "details": "The final view showed several rooms, stairs, doors, furniture, and surrounding building sections in an elevated perspective."}, {"start_s": 20848.478, "end_s": 20858.831, "action": "Orbited and zoomed through the SketchUp house model, moving from an overhead floor-plan view into a very close view of wall and floor geometry.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 20858.831, "end_s": 20869.552, "action": "Continued orbiting and zooming around the model, briefly viewing underside and exterior geometry before shifting back toward the house structure.", "intent": "Navigate the 3D model to inspect geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 20869.552, "end_s": 20880.737, "action": "Orbited and zoomed out from a close underside view to reveal the furnished rooms and broader house layout.", "intent": "Reframe the model for an overall inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 20880.737, "end_s": 20891.494, "action": "Navigated to a close doorway and window area, opened a context menu on a selected group, then dismissed it and began drawing a line or shape near the doorway.", "intent": "Inspect and edit geometry around the doorway.", "app": "SketchUp 2026", "details": null}, {"start_s": 20891.494, "end_s": 20902.982, "action": "Continued the drawing operation around the doorway, entering brief keyboard input and adjusting the selected rectangular outline with clicks and drags.", "intent": "Create or refine doorway-area geometry.", "app": "SketchUp 2026", "details": "A rectangular outline remained selected with visible dimensions in the status area."}, {"start_s": 20902.982, "end_s": 20911.826, "action": "Confirmed or adjusted the doorway-area drawing, then orbited and zoomed to a wider view of the exterior entry and adjacent rooms.", "intent": "Complete the local geometry edit and review its placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 20911.826, "end_s": 20921.488, "action": "Clicked repeatedly near the lower-right model edge, adjusted the view with scroll input, and clicked again while the drawing tool remained active.", "intent": "Continue positioning or editing geometry in the SketchUp model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20921.488, "end_s": 20931.348, "action": "Clicked several points around the doorway and model edges, briefly entered and cleared input, then pressed undo; the visible model alternated between filled and unfilled floor surfaces.", "intent": "Inspect and adjust recent geometry around the doorway.", "app": "SketchUp 2026", "details": null}, {"start_s": 20931.348, "end_s": 20940.394, "action": "Clicked around the doorway, used undo repeatedly, then zoomed or navigated outward to reveal more of the surrounding structure.", "intent": "Revert uncertain edits and review the model from a wider view.", "app": "SketchUp 2026", "details": null}, {"start_s": 20940.394, "end_s": 20952.95, "action": "Pressed undo several times, navigated the view, typed `r`, and dragged from the upper doorway area to begin a rectangular edit; the dimensions field showed approximately 4 feet by 6 feet.", "intent": "Create or size a rectangular element near the doorway.", "app": "SketchUp 2026", "details": "A rectangle-like outline was active near the top of the doorway."}, {"start_s": 20952.95, "end_s": 20964.978, "action": "Scrolled to adjust the view while the rectangle remained active, then clicked to complete or confirm the rectangular geometry; the displayed dimensions changed to approximately 1 foot 8 5/16 inches by 1 foot 4 7/16 inches.", "intent": "Refine and confirm the size of the new rectangular element.", "app": "SketchUp 2026", "details": null}, {"start_s": 20964.978, "end_s": 20974.416, "action": "Entered spaces and typed `r`, navigated the view, then dragged near the right side of the doorway to start another rectangular operation; a small outlined rectangle appeared beside the door.", "intent": "Begin placing another small rectangular element near the doorway.", "app": "SketchUp 2026", "details": "The second rectangle remained in progress at the end of the span."}, {"start_s": 20974.416, "end_s": 20984.55, "action": "Adjusted the SketchUp view with clicks, a brief text input, undo, and scrolling; then returned to the Select tool while displaying the modeled doorway and adjacent room.", "intent": "Refine the model view and selection state.", "app": "SketchUp 2026", "details": null}, {"start_s": 20984.55, "end_s": 20994.637, "action": "Navigated extensively around the SketchUp model using middle-clicks and scrolling, moving from a close-up wall view to an overhead view of two building layouts.", "intent": "Inspect different areas and views of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 20994.637, "end_s": 21005.466, "action": "Scrolled and orbited around the model, clicked within the room area, and briefly typed a command; the view settled on the doorway, gray floor, window, and plant object.", "intent": "Inspect and reposition the room model.", "app": "SketchUp 2026", "details": null}, {"start_s": 21005.466, "end_s": 21017.35, "action": "Scrolled and entered drawing input, then clicked to define a rectangular face or outline beside the doorway; continued the operation by positioning the next point along the room floor.", "intent": "Draw a new geometric element in the room.", "app": "SketchUp 2026", "details": "The drawing operation remained active at the end of the span."}, {"start_s": 21017.35, "end_s": 21027.481, "action": "Clicked to place or confirm the next drawing point, entered brief inputs, used undo, and navigated with scrolling and middle-clicks through close-up wall and floor views.", "intent": "Continue or revise the geometric drawing while inspecting its placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 21027.481, "end_s": 21037.092, "action": "Scrolled and clicked through the model, orbiting and zooming from a distant overhead view back to a close-up of the doorway and adjacent gray room wall; made several selection clicks near the room geometry.", "intent": "Inspect and select the newly edited room geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 21037.092, "end_s": 21046.346, "action": "Activated Move, clicked the model, entered spacing input, and returned to the Select tool; the view remained focused on the wall and door area.", "intent": "Adjust or position a model element in the SketchUp scene.", "app": "SketchUp 2026", "details": "Visible distance field and highlighted model edges indicate an in-progress move operation."}, {"start_s": 21046.346, "end_s": 21056.805, "action": "Navigated around the model with scroll input, clicked the wall geometry, activated Move, and repositioned the selected face or element; the view shifted toward a larger selected wall surface.", "intent": "Position a selected architectural element in the model.", "app": "SketchUp 2026", "details": "The selected face is stippled and the Move tool shows changing distance values."}, {"start_s": 21056.805, "end_s": 21065.553, "action": "Confirmed or adjusted the selected geometry, zoomed and orbited around the floor-plan view, and clicked the scene; the model changed from a close-up wall view to a broader room view and back to a selected surface.", "intent": "Inspect and refine the placement of model geometry.", "app": "SketchUp 2026", "details": "The room, door swing, and plant symbol remain visible while selection and navigation continue."}, {"start_s": 21065.553, "end_s": 21074.896, "action": "Zoomed and navigated to the doorway corner, activated the Rectangle tool, and drew or adjusted a small rectangular piece beside the door; then returned to selection.", "intent": "Create or modify a small rectangular architectural detail near the doorway.", "app": "SketchUp 2026", "details": "A temporary rectangle with visible dimensions appears at the wall corner before the view returns to the completed geometry."}, {"start_s": 21074.896, "end_s": 21084.651, "action": "Selected geometry near the doorway, navigated the view, and clicked along the narrow wall edge; the view ended with the edge highlighted in blue.", "intent": "Inspect or select the doorway-side wall geometry.", "app": "SketchUp 2026", "details": "The doorway, adjacent wall, and plant symbol remain visible; no definite new geometry is shown."}, {"start_s": 21084.651, "end_s": 21093.473, "action": "Zoomed and panned around the doorway and wall edge, clicked several times to select or inspect the narrow element, and left the model in the Select tool.", "intent": "Review and refine selection around the doorway detail.", "app": "SketchUp 2026", "details": "The final view shows the doorway and adjacent wall from a wider angle with no clearly visible new edit."}, {"start_s": 21093.473, "end_s": 21103.063, "action": "Orbited and zoomed around the SketchUp building model, then opened a context menu on a model element.", "intent": "Inspect the model from different viewpoints and access object commands.", "app": "SketchUp 2026", "details": "The context menu showed Entity Info, Erase, Hide, Lock, Edit Group, Explode, and related options."}, {"start_s": 21103.063, "end_s": 21113.248, "action": "Revealed a previously hidden object, navigated to the right-side room, and selected the brown door component.", "intent": "Inspect and select architectural elements in the model.", "app": "SketchUp 2026", "details": "The status bar indicated \u201cMake the last hidden object visible\u201d; the final view showed the door outlined in blue."}, {"start_s": 21113.248, "end_s": 21123.38, "action": "Zoomed and orbited around the selected doorway, typed a single \u201cr\u201d and spaces, then zoomed back out to show the building layout.", "intent": "Adjust the view while inspecting the doorway and surrounding floor plan.", "app": "SketchUp 2026", "details": "The view transitioned from a close doorway inspection to a wider perspective of the building."}, {"start_s": 21123.38, "end_s": 21133.062, "action": "Orbited and zoomed through the building, typed \u201cr,\u201d and activated a drawing tool to begin placing geometry in the floor-plan view.", "intent": "Navigate to an interior area and start a geometry-drawing operation.", "app": "SketchUp 2026", "details": "The final view showed the underside/interior layout with a drawing-tool cursor and dimension readout."}, {"start_s": 21133.062, "end_s": 21143.003, "action": "Continued the drawing operation with clicks and view adjustments, positioning the cursor over an interior floor-plan area and then orbiting to inspect rooms and fixtures.", "intent": "Create or position geometry while checking its placement in the model.", "app": "SketchUp 2026", "details": "The drawing tool remained active; the view changed from an underside plan to an angled room view."}, {"start_s": 21143.003, "end_s": 21152.707, "action": "Orbited and zoomed progressively outward around the building, clicking within several rooms and ending with a distant exterior view of the full model.", "intent": "Review the overall building layout and the placement of interior elements.", "app": "SketchUp 2026", "details": "The final view showed the model floating against the blue background with a neighboring building visible at right."}, {"start_s": 21152.707, "end_s": 21162.73, "action": "Orbited and zoomed around the SketchUp apartment model, moving from a floor-plan view to a close-up of the lower doorway and adjacent wall.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 21162.73, "end_s": 21172.459, "action": "Continued orbiting and zooming around the model, shifting from the interior doorway to an exterior underside view and then back toward the doorway area.", "intent": "Review the model geometry from multiple angles.", "app": "SketchUp", "details": null}, {"start_s": 21172.459, "end_s": 21182.226, "action": "Selected and manipulated geometry near the doorway, entered the letter \u201cm\u201d and spaces, and repositioned the view while the Move tool remained active.", "intent": "Adjust or inspect an object near the doorway.", "app": "SketchUp", "details": "The exact moved object and final placement are unclear from the evidence."}, {"start_s": 21182.226, "end_s": 21191.608, "action": "Clicked and typed near the doorway, then used the drawing tool to define a diagonal rectangular element across the opening while orbiting to review it.", "intent": "Create or modify geometry spanning the doorway area.", "app": "SketchUp", "details": "The drawing operation shows a dimension readout but not a confirmed completed object."}, {"start_s": 21191.608, "end_s": 21201.009, "action": "Navigated around the doorway and adjacent window, selected geometry, typed brief inputs, and moved the view to inspect the highlighted wall or edge.", "intent": "Inspect and adjust model elements around the doorway and exterior wall.", "app": "SketchUp", "details": null}, {"start_s": 21201.009, "end_s": 21211.258, "action": "Selected and moved geometry near the planter and doorway, orbited outward, and ended on an exterior perspective of the apartment model.", "intent": "Reposition or inspect the exterior doorway and planter geometry.", "app": "SketchUp", "details": null}, {"start_s": 21211.258, "end_s": 21221.795, "action": "Opened the Edit menu, selected Delete Guides, then navigated the model with middle-mouse orbit/zoom gestures to inspect a doorway and adjacent exterior building views.", "intent": "Remove visible guide lines and reposition the camera for model inspection.", "app": "SketchUp 2026", "details": "The Edit menu visibly highlighted Delete Guides before the view changed."}, {"start_s": 21221.795, "end_s": 21230.41, "action": "Orbited and zoomed around the house model, moving from an overhead view of the floor plan into a close view of an exterior door and entry area.", "intent": "Inspect different areas of the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 21230.41, "end_s": 21239.985, "action": "Continued orbiting and zooming through the multi-room house model, viewing bedrooms, bathrooms, dining areas, and hallways before settling on a close bathroom view.", "intent": "Review the interior layout from multiple camera angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 21239.985, "end_s": 21250.722, "action": "Typed shortcut characters and used orbit/selection gestures to reposition the camera around the upper exterior and bathroom area; then activated a drawing tool and began defining a rectangular region on the bathroom floor.", "intent": "Adjust the view and begin drawing or editing geometry in the model.", "app": "SketchUp 2026", "details": "The final view shows a selected rectangular outline with the Measurements field displaying dimensions."}, {"start_s": 21250.722, "end_s": 21262.992, "action": "Confirmed or adjusted the in-progress drawing with clicks and typed spaces, then orbited and zoomed out to review the two-bedroom floor plan and central bathroom from above.", "intent": "Complete or refine the active drawing and inspect its placement in the floor plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 21262.992, "end_s": 21272.972, "action": "Clicked and orbited repeatedly around the house, transitioning from the bedroom plan to a broad elevated perspective that included the stairwell, living areas, dining space, and bedrooms.", "intent": "Review the overall building model from a wider perspective.", "app": "SketchUp 2026", "details": "The final frame shows an elevated overview of the house with the stairwell and multiple furnished rooms visible."}, {"start_s": 21272.972, "end_s": 21283.853, "action": "Scrolled repeatedly through the SketchUp house model, clicked and dragged in the viewport, and changed the view from a close stairwell perspective to a wider floor-plan overview.", "intent": "Inspect and navigate the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 21283.853, "end_s": 21294.448, "action": "Entered a key, clicked and dragged in the model, scrolled through the view, and switched between overhead and angled perspectives of the house interior.", "intent": "Continue reviewing the model and adjusting the viewport.", "app": "SketchUp 2026", "details": null}, {"start_s": 21294.448, "end_s": 21304.831, "action": "Clicked and scrolled around the floor plan, used middle-button navigation to adjust the camera, and ended on an extremely close view of a wall or floor edge.", "intent": "Navigate and inspect different parts of the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 21304.831, "end_s": 21314.837, "action": "Entered a key, clicked and scrolled around the stairwell area, then used orbit navigation to rotate and zoom into the stair opening and surrounding rooms.", "intent": "Examine the stairwell and adjacent interior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 21314.837, "end_s": 21325.207, "action": "Used middle-button orbiting and repeated scrolling to pull back from the stairwell close-up to a distant overview showing two separate building models.", "intent": "Widen the inspection view and compare the model layouts.", "app": "SketchUp 2026", "details": null}, {"start_s": 21325.207, "end_s": 21335.396, "action": "Scrolled and orbited around the scene, rotating the camera to review both building models from elevated angles and ending with a broad overhead perspective.", "intent": "Inspect the overall arrangement of the architectural models.", "app": "SketchUp 2026", "details": null}, {"start_s": 21335.396, "end_s": 21345.466, "action": "Scrolled repeatedly and middle-clicked to orbit and zoom out, revealing a wider view of two building layouts in the SketchUp model.", "intent": "Inspect the overall 3D building arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 21345.466, "end_s": 21355.855, "action": "Middle-clicked and scrolled to orbit and zoom into the model, moving from the overall layout to a close view of an elevator, stairwell, and adjacent tiled floor.", "intent": "Examine the elevator and stairwell area.", "app": "SketchUp 2026", "details": null}, {"start_s": 21355.855, "end_s": 21366.04, "action": "Scrolled and middle-clicked repeatedly to orbit around the patterned tiled floor and nearby wall edges, ending on a close oblique view of the floor surface.", "intent": "Inspect the tiled floor and surrounding geometry.", "app": "SketchUp 2026", "details": "Typed \u201cm\u201d near the end of the span; no visible text result was shown."}, {"start_s": 21366.04, "end_s": 21375.954, "action": "Clicked and dragged along the edge of the floor assembly, then clicked nearby surfaces and orbited slightly; the floor edge became highlighted blue in the close-up view.", "intent": "Select or adjust a floor-edge component.", "app": "SketchUp 2026", "details": "Typed a space during the interaction; the exact command or resulting change is not visible."}, {"start_s": 21375.954, "end_s": 21386.262, "action": "Typed and clicked repeatedly along the floor edge while scrolling and dragging, leaving a long narrow floor-border face selected with a stippled highlight.", "intent": "Select or edit the floor-border geometry.", "app": "SketchUp 2026", "details": "Typed \u201cp\u201d and a space during the span; the associated tool or command is not visibly confirmed."}, {"start_s": 21386.262, "end_s": 21398.929, "action": "Typed spaces, clicked and dragged near the selected floor edge, and scrolled extensively to orbit and zoom back out, ending with a broader view of the patterned tiled area and surrounding room walls.", "intent": "Review the floor area and reposition the 3D camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 21398.929, "end_s": 21409.875, "action": "Clicked repeatedly in the SketchUp model, typed a character, and scrolled while using Push/Pull on a selected face; moved closer to the patterned floor and wall geometry.", "intent": "Inspect and adjust the modeled architectural geometry.", "app": "SketchUp 2026", "details": "The view changed from an elevated room overview to a close view of the patterned floor and adjacent walls."}, {"start_s": 21409.875, "end_s": 21420.026, "action": "Scrolled and navigated around the room model, selected a wall face, and changed to a wider overhead view showing the floor grid, partitions, and stairs.", "intent": "Review the room layout and reposition the 3D view.", "app": "SketchUp 2026", "details": "The selected wall edge was visible briefly before the camera moved to a broader interior view."}, {"start_s": 21420.026, "end_s": 21430.732, "action": "Navigated and scrolled through the model, clicked the wall area several times, and switched to a transform/copy-style tool on the wall edge near the stairs.", "intent": "Position or prepare to modify the wall geometry.", "app": "SketchUp 2026", "details": "The view settled on a close-up of the wall, staircases, tiled walkway, and patterned floor."}, {"start_s": 21430.732, "end_s": 21440.85, "action": "Entered a distance of 6 and confirmed it, then scrolled out to inspect the resulting room model from above.", "intent": "Apply a measured geometric adjustment and review the result.", "app": "SketchUp 2026", "details": "The status bar showed Distance 6 while the wall edge and tool inference remained active."}, {"start_s": 21440.85, "end_s": 21451.432, "action": "Scrolled and clicked around the patterned floor, dragged briefly, and orbited the camera to inspect the floor surface and surrounding wall edges from close angles.", "intent": "Inspect the floor texture and adjacent geometry.", "app": "SketchUp 2026", "details": "The view moved from a close patterned floor surface to an angled view of its boundary and nearby wall."}, {"start_s": 21451.432, "end_s": 21460.966, "action": "Scrolled and orbited around the room, then clicked and typed while changing tools; ended with a guide or measurement line placed across the patterned floor between the side walls.", "intent": "Measure or align the floor and surrounding walls.", "app": "SketchUp 2026", "details": "The final view showed a red guide line spanning the floor, with the status bar indicating guide placement and a length value."}, {"start_s": 21460.966, "end_s": 21468.198, "action": "Scrolled repeatedly to adjust the SketchUp camera, bringing the tiled room floor and surrounding walls into a closer view.", "intent": "Inspect the modeled room and tiled floor from a different viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 21468.198, "end_s": 21487.622, "action": "Scrolled and used middle-click camera navigation to zoom and reposition the view over the patterned tiled floor.", "intent": "Refine the viewing angle for inspecting the floor area.", "app": "SketchUp 2026", "details": null}, {"start_s": 21487.622, "end_s": 21497.12, "action": "Navigated around the room with scroll and middle-click actions, selected geometry near the wall, typed a measurement-related character, and activated a move/copy operation showing a 6-inch distance.", "intent": "Adjust or copy selected wall geometry using SketchUp's measurement and transform tools.", "app": "SketchUp 2026", "details": "The final view showed a selected wall edge with a blue transform guide and a 6-inch distance field."}, {"start_s": 21497.12, "end_s": 21507.798, "action": "Entered 6 inches and then 6 feet 5 inches with confirmations while manipulating the selected geometry, and repositioned the camera over the tiled room.", "intent": "Set precise dimensions for the ongoing SketchUp geometry operation.", "app": "SketchUp 2026", "details": "The status bar showed an active face-setting or stretch operation with a distance field."}, {"start_s": 21507.798, "end_s": 21518.24, "action": "Orbited and zoomed around the tiled room, selected wall geometry, and initiated another copy or move operation that displayed a 6-inch distance guide.", "intent": "Inspect and modify additional wall geometry around the room perimeter.", "app": "SketchUp 2026", "details": "Views shifted from the patterned floor to the right-side wall, ending with a selected edge and transform guide."}, {"start_s": 21518.24, "end_s": 21528.276, "action": "Entered 6 inches and then 6 feet 5 inches with confirmations, adjusted the view, and zoomed out to show the complete floor plan and a second modeled unit.", "intent": "Apply precise dimensions and review the overall model layout.", "app": "SketchUp 2026", "details": "The final view showed the edited unit at left and another building layout positioned to the right."}, {"start_s": 21528.276, "end_s": 21538.11, "action": "Orbited and zoomed around the SketchUp architectural models, moving from a wide view of two floor plans to a close-up of the tiled room area; clicked and briefly typed while navigating.", "intent": "Inspect the architectural model and tiled floor area from different viewpoints.", "app": "SketchUp 2026", "details": "Viewed two adjacent building models and zoomed into the left model's tiled room."}, {"start_s": 21538.11, "end_s": 21549.06, "action": "Selected the guide tool, placed or adjusted a guide across the tiled floor, then orbited and zoomed back to frame the room and surrounding floor plan.", "intent": "Position a construction guide and review its placement in the model.", "app": "SketchUp 2026", "details": "The guide tool was active and a green guide line was visible across the tiled area."}, {"start_s": 21549.06, "end_s": 21560.834, "action": "Orbited and zoomed through the tiled room, then pulled back to show the complete left building alongside the second architectural model.", "intent": "Review the tiled room and its relationship to the overall building models.", "app": "SketchUp 2026", "details": "The view alternated between close and wide perspectives of the two models."}, {"start_s": 21560.834, "end_s": 21570.829, "action": "Zoomed farther out and adjusted the orbit to compare both building models in a wider scene view.", "intent": "Inspect the overall layout and relative placement of the architectural models.", "app": "SketchUp 2026", "details": "Both models were visible at a medium-wide scale on the SketchUp workspace."}, {"start_s": 21570.829, "end_s": 21580.597, "action": "Orbited and zoomed into the right-hand building model, examining its rooms, doors, furniture outlines, and exterior walls from several close perspectives.", "intent": "Inspect interior room geometry and furnishings in the second model.", "app": "SketchUp 2026", "details": "The camera moved across multiple rooms and corridors without visible geometry edits."}, {"start_s": 21580.597, "end_s": 21600.597, "action": "Made two additional orbit adjustments and left the view on a close-up of an exterior wall and adjacent furnished room; then remained inactive while system configuration and connection changes were recorded.", "intent": "Finish the model inspection and hold on the current close-up view.", "app": "SketchUp 2026", "details": "No further visible interaction occurred after the close-up was established."}, {"start_s": 21600.597, "end_s": 21611.731, "action": "Adjusted the SketchUp view around a wall corner, selected faces, and entered dimension values including 1'4\" to modify the model.", "intent": "Edit the modeled wall geometry using precise dimensions.", "app": "SketchUp 2026", "details": "Push/Pull-style editing and camera navigation were performed."}, {"start_s": 21611.731, "end_s": 21622.348, "action": "Navigated around the wall assembly, selected a face, and used the Push/Pull tool to adjust the geometry while entering a dimension.", "intent": "Modify the wall or opening geometry precisely.", "app": "SketchUp 2026", "details": "The view changed from a close-up corner to a broader interior wall view."}, {"start_s": 21622.348, "end_s": 21632.543, "action": "Orbited and zoomed around the building model, selected a wall face, and began a drag-based geometry edit near the lower edge.", "intent": "Inspect and reshape a selected exterior wall element.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and a wall face was highlighted."}, {"start_s": 21632.543, "end_s": 21642.801, "action": "Zoomed out and orbited to review the larger floor-plan model, then continued navigating around the rooms and exterior walls.", "intent": "Review the overall model and inspect edited building elements.", "app": "SketchUp 2026", "details": "The view expanded from a local wall detail to multiple room assemblies."}, {"start_s": 21642.801, "end_s": 21653.278, "action": "Orbited and zoomed toward another exterior wall and doorway area, selected geometry, and performed a brief drag-based edit.", "intent": "Inspect and adjust another wall or enclosure element.", "app": "SketchUp 2026", "details": "The model remained in SketchUp with multiple walls, doors, and windows visible."}, {"start_s": 21653.278, "end_s": 21663.955, "action": "Navigated to a close-up wall corner, selected a face, entered 1'4\" for the Push/Pull distance, and then switched to placing a guide with an approximately 1' length.", "intent": "Apply precise dimensions and establish a construction guide on the wall.", "app": "SketchUp 2026", "details": "The final view shows the edited wall corner with the guide-placement tool active."}, {"start_s": 21663.955, "end_s": 21674.983, "action": "Typed brief keys, clicked and dragged on the model, and repeatedly scrolled/orbited around the selected front balcony or wall geometry.", "intent": "Inspect or adjust the front exterior geometry from a close view.", "app": "SketchUp 2026", "details": "Push/Pull appears active in the later screenshot; no measurable geometry change is visible."}, {"start_s": 21674.983, "end_s": 21685.067, "action": "Clicked and dragged around the front wall and balcony edges while scrolling and orbiting, then repositioned the camera to a close-up of the doorway and window.", "intent": "Continue inspecting the exterior model geometry from different angles.", "app": "SketchUp 2026", "details": "The Push/Pull tool remains active with distance shown as 0 inches."}, {"start_s": 21685.067, "end_s": 21695.039, "action": "Scrolled and orbited out to review the broader building layout, then clicked near the front balcony and returned to a close view of its corner.", "intent": "Review the model context and refocus on the exterior corner.", "app": "SketchUp 2026", "details": "The broad view shows multiple rooms, doors, windows, and stair areas."}, {"start_s": 21695.039, "end_s": 21705.131, "action": "Clicked around the exterior corner, scrolled and orbited outward, and continued navigating until the camera showed separated building sections in an elevated overview.", "intent": "Inspect the overall arrangement of the building model.", "app": "SketchUp 2026", "details": "The final view is a wide aerial perspective of two building sections."}, {"start_s": 21705.131, "end_s": 21714.886, "action": "Scrolled and orbited through the model, moving from the wide overview to closer exterior and interior-facing views of walls, windows, and rooms.", "intent": "Navigate through the architectural model for visual inspection.", "app": "SketchUp 2026", "details": "No definite geometry edit is visible; activity is primarily camera navigation."}, {"start_s": 21714.886, "end_s": 21725.481, "action": "Continued scrolling and orbiting around the building sections, ending on an elevated oblique view of the front fa\u00e7ades, doors, windows, and interior partitions.", "intent": "Inspect the building exterior and layout from additional viewpoints.", "app": "SketchUp 2026", "details": "The final screenshot shows two adjacent model sections with front entrances and room divisions."}, {"start_s": 21725.481, "end_s": 21736.355, "action": "Activated the guide tool, clicked near the narrow wall edge, and entered guide distances of 1 inch and 1 1/4 inches.", "intent": "Create reference guides along the wall detail.", "app": "SketchUp 2026", "details": "The Length field displayed changing inch values while guides were placed."}, {"start_s": 21736.355, "end_s": 21745.569, "action": "Entered another 1-inch guide distance, then navigated the model view with repeated scrolls and middle-button clicks to reposition the view.", "intent": "Continue guide placement and inspect the surrounding model area.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall detail to a wider view showing the window, door, and ledge."}, {"start_s": 21745.569, "end_s": 21755.687, "action": "Clicked and dragged to define a rectangular face or region near the ledge, then scrolled and began another placement operation.", "intent": "Draw a rectangular element on the narrow wall or ledge detail.", "app": "SketchUp 2026", "details": "A blue rectangular outline appeared and the Dimensions field showed approximately 2 inches by 10 1/8 inches."}, {"start_s": 21755.687, "end_s": 21765.469, "action": "Canceled or reset the active operation, navigated with repeated scrolling, and clicked the model to start another placement before selecting the resulting narrow rectangular face.", "intent": "Adjust the view and refine the narrow modeled detail.", "app": "SketchUp 2026", "details": "The narrow rectangular face remained visible with guide lines and was highlighted during selection."}, {"start_s": 21765.469, "end_s": 21773.982, "action": "Opened the context menu on the selected narrow face, reviewed available commands, dismissed the menu, and clicked around the face while scrolling.", "intent": "Inspect or prepare the selected geometry for editing.", "app": "SketchUp 2026", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, Reverse Faces, and related commands."}, {"start_s": 21773.982, "end_s": 21784.213, "action": "Entered a distance of 1 foot 4 inches and confirmed it while the active push/pull-style tool previewed an extrusion on the selected narrow face.", "intent": "Extrude the selected narrow face by a specified distance.", "app": "SketchUp 2026", "details": "The Distance field displayed 1' and the model showed an extrusion preview along the narrow wall detail."}, {"start_s": 21784.213, "end_s": 21794.686, "action": "Scrolled and adjusted the SketchUp view around the narrow wall-side modeled element, then clicked to change the active selection/tool state.", "intent": "Inspect and reposition the model view for further editing.", "app": "SketchUp 2026", "details": "The view shifted from a selected vertical face to the adjacent narrow geometry."}, {"start_s": 21794.686, "end_s": 21804.813, "action": "Clicked and navigated around the wall and narrow vertical element, repeatedly selecting nearby geometry and changing the view; entered brief keyboard commands while inspecting the result.", "intent": "Refine the view and select geometry in the model.", "app": "SketchUp 2026", "details": "The model remained focused on the narrow element beside the wall and ledge."}, {"start_s": 21804.813, "end_s": 21814.758, "action": "Clicked the model and issued repeated keyboard commands while working on the narrow vertical face; the face remained visible with an active selection outline.", "intent": "Continue editing or inspecting the selected model geometry.", "app": "SketchUp 2026", "details": "No clearly identifiable completed geometry change is visible beyond the active face selection."}, {"start_s": 21814.758, "end_s": 21820.849, "action": "Changed the view with middle-click navigation, typed a shortcut, and clicked twice to activate a drawing operation at the top of the narrow wall-side element.", "intent": "Begin drawing or placing a new rectangular element on the model.", "app": "SketchUp 2026", "details": "The status bar indicates the first corner was being set, and a small purple drawing preview appeared."}, {"start_s": 21820.849, "end_s": 21840.849, "action": "Remained inactive while the rectangle-drawing operation stayed active on the narrow wall-side surface.", "intent": "Pause while reviewing or positioning the in-progress drawing.", "app": "SketchUp 2026", "details": "The midpoint view shows an uncommitted rectangular outline with dimensions displayed."}, {"start_s": 21840.849, "end_s": 21850.486, "action": "Clicked and navigated the 3D view around the narrow wall-side element, then continued the active drawing operation with keyboard input; the camera shifted to an angled overhead view.", "intent": "Position and continue drawing the rectangular geometry on the model.", "app": "SketchUp 2026", "details": "The rectangle preview remained active on the top surface near the wall corner."}, {"start_s": 21850.486, "end_s": 21860.311, "action": "Clicked and scrolled around the front edge of the modeled room, then adjusted a line endpoint; the active Length field changed from approximately 6\u2032 7 13/16\u2033 to 0\u2033.", "intent": "Adjust a measured line or endpoint in the SketchUp model.", "app": "SketchUp 2026", "details": "The view remained focused on the doorway, window, and front wall edge."}, {"start_s": 21860.311, "end_s": 21867.912, "action": "Scrolled and pressed a keyboard shortcut, leaving the line tool reset to its first-endpoint state.", "intent": "Reset or prepare the next line measurement.", "app": "SketchUp 2026", "details": "The camera view shifted closer to the doorway and front edge."}, {"start_s": 21867.912, "end_s": 21878.397, "action": "Pressed the line-related shortcut, clicked near the right end of the front edge, and entered 1\u2033 followed by Enter; the tool switched to creating a guide.", "intent": "Create or position a short guide at the modeled wall edge.", "app": "SketchUp 2026", "details": "The guide/line endpoint appeared near the right corner of the front wall."}, {"start_s": 21878.397, "end_s": 21888.556, "action": "Clicked and dragged at the right corner and upper edge, used keyboard shortcuts, and repositioned the view; the measurement field showed approximately 11 1/8\u2033 before the tool returned to an active endpoint.", "intent": "Continue placing or measuring construction geometry around the corner.", "app": "SketchUp 2026", "details": "The view alternated between selection and line/guide placement near the doorway threshold."}, {"start_s": 21888.556, "end_s": 21898.571, "action": "Scrolled and orbited/panned across the room edge, pressed line-related shortcuts, and clicked near the left corner; the view ended with guide placement active and the camera angled toward the plant and wall corner.", "intent": "Navigate the model and continue laying out construction guides.", "app": "SketchUp 2026", "details": "The viewport moved from the doorway toward the opposite front corner."}, {"start_s": 21898.571, "end_s": 21907.731, "action": "Entered 2\u2033 followed by Enter, pressed a line-related shortcut, clicked near the left corner, and scrolled/orbited back to a wider room view; the active guide length ended at approximately 4\u2032 10 5/8\u2033.", "intent": "Set a guide or measured line across the front wall edge.", "app": "SketchUp 2026", "details": "The final view showed the doorway, window, plant, front wall, and a dashed construction guide."}, {"start_s": 21907.731, "end_s": 21919.909, "action": "Scrolled around the SketchUp model, entered 6'6\" and confirmed the value.", "intent": "Set a dimensional length in the active modeling operation.", "app": "SketchUp 2026", "details": "Length field visibly showed approximately 6' 6 5/8\" before confirmation."}, {"start_s": 21919.909, "end_s": 21929.45, "action": "Clicked in the model, changed the camera view through scrolling, then selected the Select tool and adjusted the view toward the left side of the opening.", "intent": "Inspect and reposition the model view after applying the dimension.", "app": "SketchUp 2026", "details": null}, {"start_s": 21929.45, "end_s": 21938.724, "action": "Typed briefly, dragged across model geometry, switched to the Eraser tool, erased or edited visible edges, and then returned to the Select tool while changing the view.", "intent": "Modify and inspect edges around the modeled opening and planter detail.", "app": "SketchUp 2026", "details": "The Eraser tool was visibly active during the middle of the span."}, {"start_s": 21938.724, "end_s": 21949.011, "action": "Clicked and scrolled through the model, dragged near the right side of the opening, and continued repositioning the camera around the lower frame and door area.", "intent": "Inspect and adjust the modeled geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 21949.011, "end_s": 21959.319, "action": "Clicked and dragged along the right end of the lower frame, scrolled to change the view, and selected geometry near the bottom edge.", "intent": "Inspect or select the lower frame geometry for continued editing.", "app": "SketchUp 2026", "details": "A lower face or edge appeared highlighted near the end of the span."}, {"start_s": 21959.319, "end_s": 21969.2, "action": "Scrolled and clicked repeatedly around the lower-right frame, dragged a selection near the bottom edge, used middle-button clicks to navigate, and ended on a shifted view of the left planter and frame corner.", "intent": "Navigate the model and refine or inspect the selected frame area.", "app": "SketchUp 2026", "details": null}, {"start_s": 21969.2, "end_s": 21979.67, "action": "Clicked and scrolled around the SketchUp model, navigating the view along the raised planter edge and doorway area.", "intent": "Inspect or position the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 21979.67, "end_s": 21989.81, "action": "Scrolled and clicked around the planter edge, leaving a long edge highlighted in blue before repositioning the view toward its left end.", "intent": "Inspect and select geometry in the model.", "app": "SketchUp 2026", "details": "A long narrow edge is visibly highlighted."}, {"start_s": 21989.81, "end_s": 21999.084, "action": "Typed brief shortcut characters, clicked the planter geometry, and used the Push/Pull tool to select the long top face; then navigated to a closer angled view of the left corner.", "intent": "Modify or inspect the selected planter geometry.", "app": "SketchUp 2026", "details": "The long top face is highlighted and the distance field shows approximately 5 5/16 inches."}, {"start_s": 21999.084, "end_s": 22009.057, "action": "Clicked the narrow corner face and scrolled slightly while keeping the close-up model view active.", "intent": "Select and inspect the corner geometry.", "app": "SketchUp 2026", "details": "The narrow corner face remains outlined in blue."}, {"start_s": 22009.057, "end_s": 22018.014, "action": "Used the Line tool to draw or adjust line segments on the narrow corner face, clicking several endpoints and leaving the face subdivided with blue edges.", "intent": "Create or refine geometry on the planter corner.", "app": "SketchUp 2026", "details": "The Line tool is active and the narrow face is selected at the end."}, {"start_s": 22018.014, "end_s": 22028.99, "action": "Selected the narrow corner face, clicked within it, and used Push/Pull to extrude the face outward; the resulting rectangular prism is highlighted.", "intent": "Extrude the newly defined corner geometry.", "app": "SketchUp 2026", "details": "The Push/Pull distance field shows approximately 1 3/16 inches."}, {"start_s": 22028.99, "end_s": 22040.058, "action": "Entered a 1'4\" measurement, navigated around the model with scrolling and orbiting, and clicked several geometry elements near the wall and ledge.", "intent": "Adjust or inspect the modeled wall and ledge geometry.", "app": "SketchUp 2026", "details": "The view changed to show a narrow vertical panel beside the ledge."}, {"start_s": 22040.058, "end_s": 22050.563, "action": "Continued orbiting and zooming around the wall assembly, then used Push/Pull on a selected face; the distance field visibly showed 6'6\" and later 3 1/8\".", "intent": "Modify the depth or position of the selected wall-side geometry.", "app": "SketchUp 2026", "details": "Push/Pull remained active while the selected white panel changed viewpoint."}, {"start_s": 22050.563, "end_s": 22060.327, "action": "Navigated through the model with orbiting and scrolling, moving from a close-up of the wall panel to a wider view of the building facade and projecting white panels.", "intent": "Inspect the updated geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The facade view showed two horizontal white panels in front of a brown door and window."}, {"start_s": 22060.327, "end_s": 22073.702, "action": "Activated orbit navigation and repeatedly scrolled and dragged the view around the facade, examining the stacked white panels, door, window, and surrounding wall.", "intent": "Review the modeled facade and panel arrangement from multiple angles.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; activity primarily changed the camera view."}, {"start_s": 22073.702, "end_s": 22082.61, "action": "Zoomed and orbited closer to the stacked facade panels, then pulled back to review the panels in relation to the door and adjacent wall.", "intent": "Inspect the panel placement and overall facade composition.", "app": "SketchUp 2026", "details": "The final view showed the two white panels and nearby matching elements farther along the wall."}, {"start_s": 22082.61, "end_s": 22093.83, "action": "Orbited and zoomed around the facade, selected the upper white panel so its edges highlighted blue, then changed the view back to an unselected wider perspective.", "intent": "Select and inspect the upper facade panel.", "app": "SketchUp 2026", "details": "SketchUp was hidden near the end of the span after a click and drag."}, {"start_s": 22093.83, "end_s": 22103.978, "action": "Navigated around the SketchUp exterior model with repeated orbit/pan inputs and zooming, moving from a close view of the balcony planter and door to a wider angled view.", "intent": "Inspect the exterior balcony and planter assembly from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 22103.978, "end_s": 22114.846, "action": "Orbited and zoomed around the balcony, then activated the orbit tool and adjusted the view to a close-up of the planter in front of the door and window.", "intent": "Refine the model viewpoint for closer inspection of the balcony assembly.", "app": "SketchUp 2026", "details": null}, {"start_s": 22114.846, "end_s": 22125.533, "action": "Restored and resized the SketchUp window, orbited the model, and used the Materials tray to browse material categories before hiding the application.", "intent": "Prepare to choose or apply a material while adjusting the workspace and model view.", "app": "SketchUp 2026", "details": "The Materials category list was visible with options including Roofing, Solid Colors, Stone, Tile, and Wood."}, {"start_s": 22125.533, "end_s": 22135.168, "action": "Selected the planter\u2019s upper panel and applied a glass material, producing a translucent blue glass surface; then orbited and zoomed to inspect the result from close and side views.", "intent": "Apply and verify a glass material on the balcony planter panel.", "app": "SketchUp 2026", "details": "The Materials tray showed the Glass category and material name Glass_Basic_01."}, {"start_s": 22135.168, "end_s": 22145.031, "action": "Orbited and zoomed around the exterior, selecting and inspecting the newly transparent planter panel from wider and elevated angles.", "intent": "Review the glass panel\u2019s appearance and placement on the balcony.", "app": "SketchUp 2026", "details": "The glass railing/panel remained visibly translucent while the door and window were seen behind it."}, {"start_s": 22145.031, "end_s": 22155.183, "action": "Adjusted the camera around the balcony, briefly undid an action, then selected the glass material and interacted with the planter panel to inspect it in a closer view.", "intent": "Fine-tune and verify the applied glass material on the balcony panel.", "app": "SketchUp 2026", "details": "The Materials tray showed Glass_Basic_01 selected, and the final view displayed the translucent blue panel across the planter."}, {"start_s": 22155.183, "end_s": 22165.218, "action": "Scrolled and clicked through the SketchUp model and Materials tray, changing the viewed material from glass to the dark M09_Shadow_Night material while zooming toward the balcony corner.", "intent": "Inspect and adjust materials on the balcony model.", "app": "SketchUp", "details": "Materials tray showed Glass_Basic_01, then M09_Shadow_Night."}, {"start_s": 22165.218, "end_s": 22175.383, "action": "Clicked and dragged around the model, then orbited and zoomed out to review the balcony from a wider exterior view with the dark material visible on its rails and base.", "intent": "Review the updated balcony appearance from different viewpoints.", "app": "SketchUp", "details": "The final view showed the full balcony, door, window, and dark railing elements."}, {"start_s": 22175.383, "end_s": 22185.527, "action": "Orbited and zoomed around the balcony, clicked model faces, and ended with the Paint Bucket tool active while the dark M09_Shadow_Night material remained selected.", "intent": "Inspect and prepare to paint additional model faces.", "app": "SketchUp", "details": "The balcony railing and base appeared dark in the final close view."}, {"start_s": 22185.527, "end_s": 22195.634, "action": "Continued clicking, orbiting, and zooming around the balcony corner, then moved to a wider front view showing the glass railing, dark trim, door, and window.", "intent": "Review the material application across the balcony assembly.", "app": "SketchUp", "details": "No dialog or text entry result was visible."}, {"start_s": 22195.634, "end_s": 22205.525, "action": "Scrolled and orbited from close-ups of the dark balcony trim to a wider exterior view, inspecting the railing and surrounding wall and door.", "intent": "Verify the balcony model and material appearance from multiple viewpoints.", "app": "SketchUp", "details": "M09_Shadow_Night remained displayed in the Materials tray."}, {"start_s": 22205.525, "end_s": 22215.23, "action": "Orbited and zoomed around the balcony, moving from the full exterior view to close-ups of the dark railing and corner trim.", "intent": "Continue visual inspection of the balcony details.", "app": "SketchUp", "details": "The final frame showed a close-up of the dark corner trim beside the wooden door."}, {"start_s": 22215.23, "end_s": 22224.441, "action": "Scrolled and middle-clicked repeatedly to navigate the SketchUp model, then hid and restored the application view while zooming toward the building facade and balcony area.", "intent": "Navigate and inspect different parts of the 3D model.", "app": "SketchUp 2026", "details": "The view changed from an overview of two building layouts to a close-up of a door, window, and balcony."}, {"start_s": 22224.441, "end_s": 22233.671, "action": "Scrolled and middle-clicked to reposition the camera around the building, then clicked the model and typed a single character; a balcony edge became selected in blue.", "intent": "Inspect and select a building component.", "app": "SketchUp 2026", "details": "The final view shows an elevated perspective of the floor plan with the front-left balcony or railing selected."}, {"start_s": 22233.671, "end_s": 22243.944, "action": "Scrolled and middle-clicked around the selected balcony, typed characters, clicked the geometry, and switched to orbit navigation to rotate the model toward its front facade.", "intent": "Examine the selected balcony and adjust the model viewpoint.", "app": "SketchUp 2026", "details": "The balcony and surrounding edges remained highlighted while the camera moved from a close-up to a front-facing exterior view."}, {"start_s": 22243.944, "end_s": 22255.003, "action": "Navigated to a close-up of a balcony door and wall, entered numeric values with Enter, undid once, then clicked and dragged to place or adjust a guide; the Measurements box showed a 1-inch value.", "intent": "Set or adjust a measured guide or model element near the balcony.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active near the balcony corner, with a visible guide and a 1-inch measurement."}, {"start_s": 22255.003, "end_s": 22265.99, "action": "Scrolled and repositioned the camera, selected the balcony railing, and dragged the selected geometry while the distance readout changed to approximately 7 1/16 inches and then 21 3/8 inches.", "intent": "Move or copy the balcony railing geometry by measured distances.", "app": "SketchUp 2026", "details": "The transparent balcony railing remained highlighted in blue during the measured transformation."}, {"start_s": 22265.99, "end_s": 22281.644, "action": "Scrolled, middle-clicked, and dragged around the balcony to inspect the adjusted railing from multiple angles, then resized or switched the SketchUp window at the end of the span.", "intent": "Review the balcony modification from different viewpoints.", "app": "SketchUp 2026", "details": "The railing appears positioned along the balcony edge; the span ends with a SketchUp window resize and application transition."}, {"start_s": 22281.644, "end_s": 22291.571, "action": "Switched to SketchUp, adjusted the view around a building entrance, and interacted with the Materials tray while zooming and navigating the model.", "intent": "Inspect and navigate the 3D building model.", "app": "SketchUp", "details": "The Materials tray showed the material named M09_Shadow_Night."}, {"start_s": 22291.571, "end_s": 22301.421, "action": "Orbited and zoomed out from a close-up of the entrance to reveal multiple building units, continuing to navigate the model with middle-button drags and scrolling.", "intent": "Review the overall arrangement of the modeled units.", "app": "SketchUp", "details": "The view changed from a close-up wall and railing to several apartment-like units."}, {"start_s": 22301.421, "end_s": 22310.437, "action": "Continued orbiting and zooming around the model, moving between an overhead view of two structures and a closer view of an entrance facade; clicked the model and typed a single character.", "intent": "Inspect different exterior views of the model.", "app": "SketchUp", "details": "The model remained in the Materials tray workspace with M09_Shadow_Night displayed."}, {"start_s": 22310.437, "end_s": 22320.279, "action": "Navigated toward a building entrance, selected a detached railing-like component, and adjusted the camera to inspect it relative to the facade.", "intent": "Inspect the detached railing component and its placement.", "app": "SketchUp", "details": "The railing-like component appeared highlighted in blue before the view was orbited."}, {"start_s": 22320.279, "end_s": 22331.777, "action": "Clicked the detached component and activated the Rotate tool, leaving the railing-like object selected with rotation controls visible; pressed Enter near the end of the span.", "intent": "Prepare or apply a rotation to the selected component.", "app": "SketchUp", "details": "The Rotate tool displayed an angle of approximately -74.9 degrees."}, {"start_s": 22331.777, "end_s": 22341.627, "action": "Kept the railing-like component selected, adjusted the view, and used the Rotate tool to reposition it near the entrance; then deselected or completed the operation, leaving the component visible on the ground.", "intent": "Rotate and place the railing component relative to the entrance.", "app": "SketchUp", "details": "The final view showed the railing-like component separated on the ground in front of the building entrance."}, {"start_s": 22341.627, "end_s": 22351.653, "action": "Navigated around the SketchUp apartment model with middle-button clicks and repeated scroll gestures, changing the camera view while keeping the Materials tray visible.", "intent": "Inspect different areas of the 3D model.", "app": "SketchUp 2026", "details": "The view remained focused on the apartment interiors and exterior walls."}, {"start_s": 22351.653, "end_s": 22361.084, "action": "Zoomed and repositioned the SketchUp camera to show both apartment sections, then activated the Rotate tool and began rotating the view around the model.", "intent": "Adjust the model viewpoint for inspection.", "app": "SketchUp 2026", "details": "The final view showed the Rotate tool active with a rotation guide around the model."}, {"start_s": 22361.084, "end_s": 22372.192, "action": "Rotated and manipulated a selected narrow model component near the apartment entrance, using clicks, drags, and brief keyboard input; then switched back to a general selection/move view.", "intent": "Position or inspect the selected model component.", "app": "SketchUp 2026", "details": "The narrow component remained highlighted in blue beside the building entrance."}, {"start_s": 22372.192, "end_s": 22382.232, "action": "Continued manipulating the selected component, navigated out to a wider model view, and then zoomed into a doorway and balcony area with middle-button camera movements.", "intent": "Inspect the component and nearby building details from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view was a close-up of a brown door, window, and balcony wall."}, {"start_s": 22382.232, "end_s": 22391.193, "action": "Adjusted the camera around the doorway, entered brief keyboard input including a typed value followed by Enter, and activated the Tape Measure tool to place or inspect a guide point near the balcony edge.", "intent": "Measure or establish a reference around the doorway and balcony.", "app": "SketchUp 2026", "details": "The Tape Measure cursor and guide point were visible beside the door and balcony wall."}, {"start_s": 22391.193, "end_s": 22400.437, "action": "Navigated extensively around the model with repeated scroll gestures, selected the detached narrow component, and moved it with the Move tool while zooming in for placement.", "intent": "Reposition the detached model component.", "app": "SketchUp 2026", "details": "The component was highlighted blue in the final close-up, and the Move tool showed a distance of approximately 9 9/16 inches."}, {"start_s": 22400.437, "end_s": 22410.481, "action": "Scrolled through the SketchUp model view and clicked the selected balcony/railing geometry, leaving the move tool active and changing the close-up perspective.", "intent": "Inspect and adjust the selected model geometry.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 22410.481, "end_s": 22419.875, "action": "Navigated around the model with scroll and middle-click orbiting, then returned to a wider view showing the building exterior and balcony railings.", "intent": "Review the building model from a broader perspective.", "app": "SketchUp 2026", "details": "Selection was cleared; the model remained in the Materials tray workspace."}, {"start_s": 22419.875, "end_s": 22430.022, "action": "Scrolled and orbited around the building, briefly activated a guide-related tool, and changed the view from a close balcony corner to the door-and-railing area.", "intent": "Inspect balcony and wall geometry from different angles.", "app": "SketchUp 2026", "details": "A guide cursor and length readout were visible during part of the span."}, {"start_s": 22430.022, "end_s": 22440.459, "action": "Activated the guide tool, clicked near the balcony edge, and entered 15/16 followed by Enter, placing a measured guide before orbiting to an exterior view.", "intent": "Set a precise guide distance in the model.", "app": "SketchUp 2026", "details": "The visible length readout ended at 15/16."}, {"start_s": 22440.459, "end_s": 22450.14, "action": "Scrolled and orbited around the building, activated the guide tool again, and clicked near the balcony corner to begin another measured guide placement.", "intent": "Continue positioning or checking guides around the balcony.", "app": "SketchUp 2026", "details": "The view moved between a wide building view and a close-up of the door, window, and railing."}, {"start_s": 22450.14, "end_s": 22460.688, "action": "Entered 1 followed by Enter for the active guide, then scrolled and orbited to review the balcony from a wider exterior angle; briefly typed s while navigating.", "intent": "Set another guide distance and inspect the resulting model view.", "app": "SketchUp 2026", "details": "The guide length readout showed 1 before the view was widened."}, {"start_s": 22460.688, "end_s": 22471.38, "action": "Adjusted the scale of the selected balcony railing group, scrolling and clicking around the model while changing the scale interactively.", "intent": "Resize the selected railing assembly.", "app": "SketchUp 2026", "details": "Selected group remained active with scale grips visible."}, {"start_s": 22471.38, "end_s": 22481.077, "action": "Continued scaling the selected railing group, navigated the 3D view, and then switched back to the Select tool, leaving the railing unselected.", "intent": "Finish resizing and review the railing in context.", "app": "SketchUp 2026", "details": "The railing appears black and transparent in front of the door and window."}, {"start_s": 22481.077, "end_s": 22490.672, "action": "Selected the railing group again and adjusted its scale from the right end, changing the displayed scale value while keeping the group highlighted.", "intent": "Refine the railing dimensions.", "app": "SketchUp 2026", "details": "Green scale grips and yellow/blue selection outlines were visible."}, {"start_s": 22490.672, "end_s": 22500.4, "action": "Exited the active scaling state, clicked and dragged around the railing, and reselected the group for inspection.", "intent": "Inspect and reposition the railing geometry.", "app": "SketchUp 2026", "details": "The Default Tray alternated between No Selection and the selected Group (3 in model)."}, {"start_s": 22500.4, "end_s": 22508.45, "action": "Navigated the model with middle-button view changes and scrolling, zooming out to show the full balcony railing and surrounding facade, then selected geometry near the railing.", "intent": "Review the railing placement from wider and closer viewpoints.", "app": "SketchUp 2026", "details": "The view moved from a close-up of the railing to a wider exterior view."}, {"start_s": 22508.45, "end_s": 22518.096, "action": "Scrolled and navigated around the railing, clicked and dragged across its upper and side geometry, and ended with a railing face selected in a close-up view.", "intent": "Inspect the railing faces and geometry.", "app": "SketchUp 2026", "details": "The final view shows the transparent railing with a selected face and Face information in the Default Tray."}, {"start_s": 22518.096, "end_s": 22527.124, "action": "Orbited and zoomed around the balcony railing and adjacent door, moving from a close corner view to inspect the railing from different angles.", "intent": "Inspect the balcony railing geometry and its placement near the door.", "app": "SketchUp 2026", "details": "No object remained selected."}, {"start_s": 22527.124, "end_s": 22536.898, "action": "Orbited and zoomed out from the balcony corner to reveal the broader building model and multiple rooms.", "intent": "Review the balcony area in the context of the overall building layout.", "app": "SketchUp 2026", "details": "The final view showed a wide exterior overview of the model."}, {"start_s": 22536.898, "end_s": 22546.668, "action": "Continued orbiting and zooming around the building exterior, then briefly entered a text command while keeping the model in view.", "intent": "Adjust the camera to review the building and balcony from a wider angle.", "app": "SketchUp 2026", "details": "The model remained unselected and displayed in an elevated exterior view."}, {"start_s": 22546.668, "end_s": 22557.738, "action": "Selected a point or edge near the balcony, entered numeric values followed by Enter, and repositioned the view around the door and railing.", "intent": "Set or adjust a measured position related to the balcony geometry.", "app": "SketchUp 2026", "details": "The active tool displayed a length field while the view focused on the balcony entrance."}, {"start_s": 22557.738, "end_s": 22566.042, "action": "Selected the balcony railing group and entered move/copy-related commands, then manipulated the selected railing while orbiting around it.", "intent": "Modify or reposition the balcony railing assembly.", "app": "SketchUp 2026", "details": "The railing was highlighted in blue and the Measurements box showed a distance of about 1' 9 1/4\"."}, {"start_s": 22566.042, "end_s": 22576.024, "action": "Continued moving and orbiting the selected balcony railing group, then clicked to change the selection state while inspecting its corner and alignment.", "intent": "Refine or verify the railing placement at the balcony edge.", "app": "SketchUp 2026", "details": "The railing remained highlighted during most of the span, with the final view showing its corner beside the door."}, {"start_s": 22576.024, "end_s": 22590.315, "action": "Typed a scale command, clicked the selected group, and left the Scale tool active while adjusting the model view.", "intent": "Adjust the size of the selected model group.", "app": "SketchUp 2026", "details": "Selected group and Scale tool remained active."}, {"start_s": 22590.315, "end_s": 22600.403, "action": "Scrolled and middle-dragged to orbit and zoom the model, then clicked scale grips to resize the selected group; the displayed green scale value reached 0.91.", "intent": "Refine the selected group's scale and inspect it from different views.", "app": "SketchUp 2026", "details": "Group remained selected with scale grips visible."}, {"start_s": 22600.403, "end_s": 22610.444, "action": "Navigated through the model with orbit and zoom gestures, then switched tools and ended with the full building visible before zooming toward an exterior wall.", "intent": "Inspect the architectural model from different viewpoints.", "app": "SketchUp 2026", "details": "Selection was cleared and the Select tool was active by the end."}, {"start_s": 22610.444, "end_s": 22620.03, "action": "Middle-dragged and scrolled to orbit and zoom around the building, reviewing exterior walls, doors, windows, and balconies from several angles.", "intent": "Review the building model geometry and exterior layout.", "app": "SketchUp 2026", "details": "No object was selected."}, {"start_s": 22620.03, "end_s": 22628.98, "action": "Selected a balcony railing group, navigated closer with scrolling and orbiting, then initiated a copy/move operation and dragged the selected railing away from the building.", "intent": "Duplicate or reposition the selected balcony railing component.", "app": "SketchUp 2026", "details": "Copy/Move tool remained active with the railing selected."}, {"start_s": 22628.98, "end_s": 22639.105, "action": "Clicked to set up a rotation on the detached railing copy, adjusted the rotation tool, and ended with the railing still selected in the model workspace.", "intent": "Rotate or position the copied railing component.", "app": "SketchUp 2026", "details": "Rotation setup was visible before returning to selection mode."}, {"start_s": 22639.105, "end_s": 22648.744, "action": "Navigated and zoomed around the SketchUp building model, then entered a short dimension value and confirmed it.", "intent": "Inspect the model and begin dimensioning a selected area.", "app": "SketchUp 2026", "details": "Viewed the exterior doorway and low wall while using scroll navigation and numeric input."}, {"start_s": 22648.744, "end_s": 22659.257, "action": "Selected the low wall edge, entered 15 inches, corrected the value, and confirmed 15/16 inches.", "intent": "Set a precise guide or dimension along the wall edge.", "app": "SketchUp 2026", "details": "The Measurements box visibly showed a length of 15 during entry."}, {"start_s": 22659.257, "end_s": 22669.757, "action": "Repositioned the view to the opposite end of the doorway wall, entered a one-inch value, and continued navigating around the selected edge.", "intent": "Add or adjust a small measured guide near the wall corner.", "app": "SketchUp 2026", "details": "The guide tool remained active near the doorway corner."}, {"start_s": 22669.757, "end_s": 22681.082, "action": "Selected the modeled group and moved it while orbiting and zooming around the doorway; left the group highlighted in blue.", "intent": "Position the grouped railing or wall component relative to the doorway.", "app": "SketchUp 2026", "details": "The Default Tray identified the selection as Group (3 in model), and the distance field showed approximately 12 feet 5 11/16 inches."}, {"start_s": 22681.082, "end_s": 22691.216, "action": "Continued orbiting and zooming around the selected group, then cleared the selection and inspected the doorway and railing from closer views.", "intent": "Review the placement and alignment of the modeled component.", "app": "SketchUp 2026", "details": "The railing-like group remained visible across the low wall before the view shifted to the door."}, {"start_s": 22691.216, "end_s": 22701.642, "action": "Placed and confirmed one-inch and 15/16-inch measurements on the doorway-side wall edge while panning and zooming for alignment.", "intent": "Refine precise dimensions at the wall and doorway corner.", "app": "SketchUp 2026", "details": "The Measurements box showed approximately 7/8 inch and later 1 3/8 inches during guide placement."}, {"start_s": 22701.642, "end_s": 22712.2, "action": "Entered a 1-inch value, confirmed it, and orbited and zoomed the SketchUp model from a close doorway view to a wider building view.", "intent": "Adjust a model measurement and inspect the building from different angles.", "app": "SketchUp 2026", "details": "The model remained unselected while the camera view changed."}, {"start_s": 22712.2, "end_s": 22721.953, "action": "Selected the front railing group, entered the move workflow, and orbited and zoomed around the building while keeping the group selected.", "intent": "Position or inspect the selected railing component in the model.", "app": "SketchUp 2026", "details": "The selected group was shown with a blue bounding outline and a distance field."}, {"start_s": 22721.953, "end_s": 22734.508, "action": "Dragged and orbited extensively, zooming out from the selected building area to reveal two separate floor-plan models, then changed to a wider oblique view.", "intent": "Inspect the overall arrangement of the modeled buildings.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; the activity primarily changed the camera view."}, {"start_s": 22734.508, "end_s": 22744.218, "action": "Orbited and zoomed toward the building facade, clicked several model areas, and navigated around the front wall and adjacent rooms.", "intent": "Inspect facade and interior geometry from closer viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray remained open with solid-color swatches visible."}, {"start_s": 22744.218, "end_s": 22754.359, "action": "Dragged across the model with the Eraser tool, erasing or attempting to erase edges while moving along the exterior wall; then continued dragging near the upper wall.", "intent": "Modify or clean up visible model edges on the building exterior.", "app": "SketchUp 2026", "details": "The Eraser tool was active, and the model edges became highlighted blue during the operation."}, {"start_s": 22754.359, "end_s": 22764.316, "action": "Continued dragging the Eraser tool across the selected exterior wall area, moving from the broad facade toward a close-up section.", "intent": "Continue cleaning up exterior geometry.", "app": "SketchUp 2026", "details": "The facade remained outlined in blue at first, then the view moved into a close-up of the wall with no visible selection."}, {"start_s": 22764.316, "end_s": 22773.779, "action": "Erased or adjusted model elements while navigating the SketchUp apartment model, then orbited and zoomed to reveal a wider exterior view.", "intent": "Inspect and modify visible model geometry.", "app": "SketchUp 2026", "details": "The Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 22773.779, "end_s": 22783.616, "action": "Scrolled and clicked around the model, switching to selection and then eraser behavior while adjusting the view of an exterior wall and balcony area.", "intent": "Refine or inspect wall geometry in the model.", "app": "SketchUp 2026", "details": "A vertical model edge was highlighted near the end of the span."}, {"start_s": 22783.616, "end_s": 22793.967, "action": "Dragged and clicked across the apartment model, then zoomed or orbited outward to show more of the building layout and exterior walls.", "intent": "Review the building model from a broader angle.", "app": "SketchUp 2026", "details": "The view changed from a close wall and vent to a wider elevated perspective."}, {"start_s": 22793.967, "end_s": 22804.018, "action": "Orbited and zoomed around the model, moving from a close wall view to a distant overall view of the apartment block.", "intent": "Inspect the model from multiple viewpoints.", "app": "SketchUp 2026", "details": "The orbit tool was active near the end, and the Materials tray stayed visible."}, {"start_s": 22804.018, "end_s": 22815.214, "action": "Orbited and zoomed around exterior rooms and balconies, moving from an elevated building view to close views of a wall, window, and balcony.", "intent": "Examine exterior architectural details.", "app": "SketchUp 2026", "details": "The view ended on a close-up of a balcony-facing wall and window."}, {"start_s": 22815.214, "end_s": 22824.698, "action": "Scrolled, clicked, and dragged while navigating from a close window and wall view to a broad elevated overview of the apartment layout.", "intent": "Review the model layout and exterior details from different scales.", "app": "SketchUp 2026", "details": "The final view showed multiple rooms, balconies, doors, and windows from above."}, {"start_s": 22824.698, "end_s": 22834.766, "action": "Navigated around the SketchUp building model with repeated orbit, pan, and zoom gestures, then switched to selection and clicked near the exterior wall.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp", "details": "The view moved from a close exterior wall view to another close wall view while the Materials tray remained open."}, {"start_s": 22834.766, "end_s": 22844.935, "action": "Selected and manipulated geometry while zooming and orbiting out, bringing the complete building layout into view before continuing toward an exterior wall.", "intent": "Review the building model and adjust the camera view.", "app": "SketchUp", "details": "The model was shown as a multi-room building with exterior doors, windows, and balconies."}, {"start_s": 22844.935, "end_s": 22854.328, "action": "Orbited, panned, and zoomed through the building model, moving from a close wall view to an angled exterior view that clearly showed a wooden door, window, and balcony railing.", "intent": "Inspect exterior architectural details.", "app": "SketchUp", "details": "The Materials tray displayed the material named M09_Shadow_Night."}, {"start_s": 22854.328, "end_s": 22865.241, "action": "Scrolled and adjusted the camera slightly to review the upper exterior and adjacent rooms, ending on a wider angled view of the fa\u00e7ade and balcony.", "intent": "Continue inspecting the building model from an elevated angle.", "app": "SketchUp", "details": "A power-source change occurred during the span; no model edit was clearly evidenced."}, {"start_s": 22865.241, "end_s": 22875.138, "action": "Closed or hid the right-side tray/window area, then orbited and zoomed out to show the building as a smaller complete model alongside another structure.", "intent": "Create a wider overview of the modeled structures.", "app": "SketchUp", "details": "The application window was resized or hidden briefly, and the final view showed two separate building models."}, {"start_s": 22875.138, "end_s": 22880.904, "action": "Orbited and zoomed across the overview, moving from both structures in frame to a closer top-down inspection of rooms, stairs, bathroom fixtures, and furnishings in the right-hand building.", "intent": "Inspect the interior layout from above.", "app": "SketchUp", "details": "The camera ended on a close overhead view of interior rooms and circulation areas."}, {"start_s": 22880.904, "end_s": 22900.904, "action": "Entered repeated whitespace keystrokes while the SketchUp architectural model view remained unchanged.", "intent": "Maintain or navigate an active text/input state without visibly changing the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 22900.904, "end_s": 22911.065, "action": "Continued entering whitespace keystrokes in SketchUp; the architectural model view remained unchanged.", "intent": "Continue input in the active state without visibly modifying the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 22911.065, "end_s": 22928.069, "action": "Paused, then entered a single Z keystroke; the view changed to show two building models from a wider perspective.", "intent": "Adjust the SketchUp viewing state and inspect both models.", "app": "SketchUp 2026", "details": null}, {"start_s": 22928.069, "end_s": 22935.024, "action": "Dragged and scrolled in the modeling area, then entered 11; the view zoomed farther out to show both building models smaller on screen.", "intent": "Navigate and adjust the camera view for a broader model overview.", "app": "SketchUp 2026", "details": null}, {"start_s": 22935.024, "end_s": 22949.763, "action": "Pressed Enter; the view settled on a wider overview of the two architectural models.", "intent": "Confirm the current view or active input state.", "app": "SketchUp 2026", "details": null}, {"start_s": 22949.763, "end_s": 22955.262, "action": "Entered a sequence of backslashes, digits, and repeated 9 characters while the two-model overview remained unchanged.", "intent": "Continue typing into an active input state without visibly modifying the models.", "app": "SketchUp 2026", "details": null}, {"start_s": 22955.262, "end_s": 22975.262, "action": "Typed the number 54 and repeatedly pressed Enter while the SketchUp model view remained unchanged.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 22975.262, "end_s": 22995.262, "action": "Repeatedly pressed Enter in SketchUp; the two architectural floor-plan models remained visible without an apparent change.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 22995.262, "end_s": 23015.262, "action": "Repeatedly pressed Enter while leaving the SketchUp architectural models unchanged on screen.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 23015.262, "end_s": 23035.262, "action": "Repeatedly pressed Enter in the active SketchUp window; the displayed floor-plan models did not visibly change.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 23035.262, "end_s": 23055.262, "action": "Repeatedly pressed Enter while the SketchUp scene remained static with two architectural models visible.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 23055.262, "end_s": 23075.262, "action": "Repeatedly pressed Enter in SketchUp; no visible change occurred to the architectural floor-plan scene.", "intent": "Continue keyboard input in the active SketchUp context.", "app": "SketchUp 2026", "details": "No visible model or view change."}, {"start_s": 23075.262, "end_s": 23095.262, "action": "Pressed Enter repeatedly while SketchUp remained on the same architectural model view; no visible change occurred.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "Repeated Enter key events; the 3D floor-plan models remained unchanged."}, {"start_s": 23095.262, "end_s": 23115.262, "action": "Pressed Enter repeatedly while SketchUp remained on the same architectural model view; brief system configuration changes were recorded, with no visible change to the model.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "Screen, network, power, input-source, and memory events were recorded around 23096s."}, {"start_s": 23115.262, "end_s": 23135.262, "action": "Pressed Enter repeatedly while viewing the unchanged SketchUp architectural models.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "No visible geometry, camera, or selection change occurred."}, {"start_s": 23135.262, "end_s": 23155.262, "action": "Pressed Enter repeatedly while viewing the unchanged SketchUp architectural models.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "No visible geometry, camera, or selection change occurred."}, {"start_s": 23155.262, "end_s": 23175.262, "action": "Pressed Enter repeatedly while viewing the unchanged SketchUp architectural models.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "No visible geometry, camera, or selection change occurred."}, {"start_s": 23175.262, "end_s": 23195.262, "action": "Pressed Enter repeatedly while viewing the unchanged SketchUp architectural models.", "intent": "Continue keyboard input or advance through an unspecified state.", "app": "SketchUp 2026", "details": "No visible geometry, camera, or selection change occurred."}, {"start_s": 23195.262, "end_s": 23215.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23215.262, "end_s": 23235.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23235.262, "end_s": 23255.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23255.262, "end_s": 23275.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23275.262, "end_s": 23295.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23295.262, "end_s": 23315.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two 3D building layouts.", "intent": "Continue keyboard input in the active SketchUp workspace.", "app": "SketchUp 2026", "details": "No visible model or view change occurred."}, {"start_s": 23315.262, "end_s": 23335.262, "action": "Pressed Enter repeatedly while the SketchUp model view remained unchanged, showing two architectural floor-plan models.", "intent": "Continue keyboard input without changing the visible model view.", "app": "SketchUp 2026", "details": "Repeated Enter keystrokes; no visible interface change."}, {"start_s": 23335.262, "end_s": 23355.262, "action": "Pressed Enter repeatedly while the SketchUp workspace remained on the same two architectural models.", "intent": "Continue keyboard input without changing the visible model view.", "app": "SketchUp 2026", "details": "Repeated Enter keystrokes; no visible interface change."}, {"start_s": 23355.262, "end_s": 23375.262, "action": "Pressed Enter repeatedly as the unchanged SketchUp model view stayed visible.", "intent": "Continue keyboard input without changing the visible model view.", "app": "SketchUp 2026", "details": "Repeated Enter keystrokes; no visible interface change."}, {"start_s": 23375.262, "end_s": 23395.262, "action": "Pressed Enter repeatedly while the two architectural models remained displayed in SketchUp.", "intent": "Continue keyboard input without changing the visible model view.", "app": "SketchUp 2026", "details": "Repeated Enter keystrokes; no visible interface change."}, {"start_s": 23395.262, "end_s": 23415.262, "action": "Pressed Enter repeatedly; brief system configuration, network, power, input-source, and memory notifications occurred, while the SketchUp view remained unchanged.", "intent": "Continue keyboard input during transient system-state changes.", "app": "SketchUp 2026", "details": "No visible model or tool change; system events were recorded around 23396.93s."}, {"start_s": 23415.262, "end_s": 23433.452, "action": "Pressed Enter repeatedly, briefly moved and resized a Windows Explorer window, then continued pressing Enter with minor scroll events; the SketchUp model view remained unchanged.", "intent": "Continue keyboard input while a background window was repositioned.", "app": "SketchUp 2026", "details": "Explorer window resize was recorded as 361x60; no visible change to the SketchUp models."}, {"start_s": 23433.452, "end_s": 23444.456, "action": "Pressed Enter repeatedly, scrolled through the SketchUp model, and middle-clicked to orbit from an overhead interior view toward the bedrooms and exterior wall.", "intent": "Navigate and inspect the 3D building model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 23444.456, "end_s": 23454.107, "action": "Continued orbiting and zooming the SketchUp model, then typed \u201cr\u201d and selected the Rectangle tool, leaving the building viewed from above with a drawing operation active.", "intent": "Adjust the model view and begin drawing a rectangular element.", "app": "SketchUp 2026", "details": null}, {"start_s": 23454.107, "end_s": 23464.958, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom around the upper rooms, while positioning an active rectangle preview across the building.", "intent": "Inspect the upper floor and position the rectangle being drawn.", "app": "SketchUp 2026", "details": null}, {"start_s": 23464.958, "end_s": 23476.485, "action": "Scrolled through several views of the building while keeping the active rectangle preview aligned over the floor plan; the model remained in the rectangle-drawing state.", "intent": "Refine the view and placement of the rectangular drawing.", "app": "SketchUp 2026", "details": "A midpoint inference indicator was visible on the model."}, {"start_s": 23476.485, "end_s": 23485.805, "action": "Scrolled and pressed a key while continuing the rectangle operation, then middle-clicked and adjusted the view; the rectangle preview expanded across the building with constrained-plane guidance visible.", "intent": "Continue sizing the rectangle on the model plane.", "app": "SketchUp 2026", "details": "The status area showed constrained plane intersection guidance and changing dimensions."}, {"start_s": 23485.805, "end_s": 23496.583, "action": "Scrolled and clicked twice near the lower-right room area, then zoomed or orbited substantially; the view changed to a mostly top-down plan while the drawing operation remained active.", "intent": "Continue positioning or sizing the active rectangle over the building layout.", "app": "SketchUp 2026", "details": "Blue rectangle edges and inference markers remained visible before the final top-down view."}, {"start_s": 23496.583, "end_s": 23507.344, "action": "Orbited and zoomed the SketchUp camera around two house models, moving from a distant view to a closer angled view of both structures.", "intent": "Inspect the overall 3D house models from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 23507.344, "end_s": 23517.024, "action": "Zoomed and orbited toward the right-hand house, selected its roof or upper faces, and continued moving the camera into a close interior view.", "intent": "Inspect and select upper surfaces of the right-hand house model.", "app": "SketchUp", "details": null}, {"start_s": 23517.024, "end_s": 23528.351, "action": "Selected interior faces, activated the Push/Pull tool, entered a distance of 1, and applied the operation to the house geometry while orbiting and zooming; a Windows notification briefly appeared at the end.", "intent": "Modify interior floor or face geometry in the SketchUp model.", "app": "SketchUp", "details": "A OneDrive notification asking for permission to search photos appeared near the end of the span."}, {"start_s": 23528.351, "end_s": 23538.196, "action": "Dismissed or hid the Windows notification, returned focus to SketchUp, and orbited and zoomed around the house exterior and interior walls.", "intent": "Resume inspecting the modified house model from multiple viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 23538.196, "end_s": 23548.221, "action": "Orbited and zoomed extensively through the house model, moving from a close wall view to a wider view of both structures and adjusting the camera around the building exterior.", "intent": "Review the house model and its surrounding geometry from different angles.", "app": "SketchUp", "details": null}, {"start_s": 23548.221, "end_s": 23557.715, "action": "Continued orbiting and zooming, alternately framing both house models and then centering the right-hand structure in a closer elevated view.", "intent": "Inspect the overall layout and interior arrangement of the 3D models.", "app": "SketchUp", "details": null}, {"start_s": 23557.715, "end_s": 23567.832, "action": "Navigated around the 3D building model with repeated view adjustments, then switched to the Eraser tool and erased or inspected parts of a balcony-like facade.", "intent": "Refine the modeled balcony and facade geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 23567.832, "end_s": 23578.0, "action": "Continued orbiting and zooming around the building model while the Eraser tool remained active, inspecting and modifying wall and balcony geometry from several angles.", "intent": "Continue refining and checking the model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 23578.0, "end_s": 23587.51, "action": "Selected and dragged around the balcony and adjacent wall geometry, then changed the camera view to inspect the edited facade from wider and elevated angles.", "intent": "Adjust or inspect the building facade and balcony components.", "app": "SketchUp 2026", "details": null}, {"start_s": 23587.51, "end_s": 23597.331, "action": "Dragged across the model for an extended period, orbiting and zooming out to reveal the larger building layout before returning to a close view of a wall corner.", "intent": "Review the edited geometry in both overall and close-up views.", "app": "SketchUp 2026", "details": null}, {"start_s": 23597.331, "end_s": 23606.75, "action": "Navigated to another balcony and doorway area, selected and dragged on the model, then zoomed closely into a large wall corner with the Eraser tool active.", "intent": "Inspect and refine another facade or balcony section.", "app": "SketchUp 2026", "details": null}, {"start_s": 23606.75, "end_s": 23616.552, "action": "Continued orbiting and zooming around the wall and balcony geometry, clicked and dragged on the facade, and ended on a close view of a tall wall edge.", "intent": "Continue detailed inspection or cleanup of the modeled facade.", "app": "SketchUp 2026", "details": null}, {"start_s": 23616.552, "end_s": 23626.094, "action": "Drag and orbit the SketchUp camera around the building model, then zoom out to reveal multiple room layouts and exterior walls.", "intent": "Inspect the overall 3D building model from a wider angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 23626.094, "end_s": 23636.107, "action": "Navigate through the model with clicks, scrolling, and dragging, moving from a close wall corner to a floor and exterior-edge view.", "intent": "Examine different areas of the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 23636.107, "end_s": 23646.129, "action": "Use the active eraser tool while clicking and dragging across model geometry, then continue scrolling and repositioning the view around walls and partitions.", "intent": "Modify or inspect model geometry using the eraser tool.", "app": "SketchUp 2026", "details": null}, {"start_s": 23646.129, "end_s": 23654.11, "action": "Undo several recent operations, then orbit and zoom the camera outward to review the broader building layout and surrounding model elements.", "intent": "Revert recent edits and inspect the overall arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 23654.11, "end_s": 23664.839, "action": "Undo additional operations, orbit and zoom across the scene, and reposition the camera from a two-building overview to a closer angled view of the room partitions and doors.", "intent": "Review the architectural model from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 23664.839, "end_s": 23676.242, "action": "Orbit and zoom around the building model, ending on a close view of an exterior balcony railing and adjacent brown door; click the railing area to select it.", "intent": "Inspect and select an exterior railing component.", "app": "SketchUp 2026", "details": null}, {"start_s": 23676.242, "end_s": 23685.137, "action": "Navigated around the SketchUp model with repeated scrolls and clicks, typed a space, and switched to the Rotate tool while positioning the view around the detached rectangular object.", "intent": "Adjust the model view and prepare an object for transformation.", "app": "SketchUp 2026", "details": "A multi-room architectural model and a detached rectangular component remained visible."}, {"start_s": 23685.137, "end_s": 23697.22, "action": "Clicked the detached component, entered a rotation angle of 90, and navigated the camera to an overhead view of the architectural model.", "intent": "Rotate the selected model component and inspect its placement.", "app": "SketchUp 2026", "details": "The Rotate tool showed Angle 90 before the view changed."}, {"start_s": 23697.22, "end_s": 23706.164, "action": "Panned and zoomed extensively around the model, moved to a close-up of a wall and detached component, typed p, and selected the Push/Pull tool.", "intent": "Inspect the geometry and begin editing a face.", "app": "SketchUp 2026", "details": "The view ended extremely close to isolated geometry near the model axes."}, {"start_s": 23706.164, "end_s": 23716.626, "action": "Navigated around the isolated geometry with middle-button camera movements and selected a face with the Push/Pull tool, dragging it to change its distance.", "intent": "Modify the thickness or extrusion of the selected face.", "app": "SketchUp 2026", "details": "The Push/Pull distance field showed approximately -7/8 inch."}, {"start_s": 23716.626, "end_s": 23723.456, "action": "Continued manipulating the selected geometry with clicks, scrolls, and camera panning, then zoomed out to reveal the detached component and a broader portion of the building model.", "intent": "Review the edited geometry in the context of the larger model.", "app": "SketchUp 2026", "details": "The final view showed the upper building section, lower tiled area, and detached rectangular piece."}, {"start_s": 23723.456, "end_s": 23734.104, "action": "Used repeated scrolls to navigate and zoom around the building exterior and nearby detached component, ending on a closer view of an exterior threshold and wall edge.", "intent": "Inspect the model after the geometry edit.", "app": "SketchUp 2026", "details": "No further tool selection or text entry was visible; activity consisted of view navigation."}, {"start_s": 23734.104, "end_s": 23744.048, "action": "Navigated around the SketchUp model with repeated middle-button view movements and scrolling, ending on a close view of a wall and low framed structure.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 23744.048, "end_s": 23754.02, "action": "Continued orbiting and zooming around the model, activated the Tape Measure tool, and entered dimension values including 15/16\" and confirmed them.", "intent": "Measure or position geometry precisely.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active and the status bar showed a length of about 1 9/16\"."}, {"start_s": 23754.02, "end_s": 23765.304, "action": "Entered an additional value of 1\", adjusted the view, and selected and moved a long narrow framed component near the model edge.", "intent": "Position the model component using measured dimensions.", "app": "SketchUp 2026", "details": "The selected component was shown in blue with a move distance of approximately 17' 6 5/8\"."}, {"start_s": 23765.304, "end_s": 23774.102, "action": "Selected the long framed component, adjusted the view, and began scaling it; entered a text value and dragged the scale grip to resize the component.", "intent": "Resize the component to fit the surrounding structure.", "app": "SketchUp 2026", "details": "The Scale tool was active and the component was highlighted with yellow bounds."}, {"start_s": 23774.102, "end_s": 23785.35, "action": "Continued scaling the selected framed component by dragging its grips, substantially increasing its displayed scale.", "intent": "Refine the component dimensions.", "app": "SketchUp 2026", "details": "The Scale tool showed a red/green scale value changing to approximately 1.00, 2.08."}, {"start_s": 23785.35, "end_s": 23795.348, "action": "Adjusted the camera around the selected component, continued scaling with a displayed factor near 1.09, then exited the scaling state and left the model in a front-facing view of the framed structure.", "intent": "Finalize the component placement and size while checking the result.", "app": "SketchUp 2026", "details": "The final view showed the long black-topped framed element aligned within the surrounding walls."}, {"start_s": 23795.348, "end_s": 23806.012, "action": "Navigated around the SketchUp model with repeated middle-button view adjustments and scrolling, then selected and began moving the long rectangular object along the building frontage.", "intent": "Position and manipulate the modeled rectangular component.", "app": "SketchUp 2026", "details": "The object remained highlighted in blue and the move tool showed an active distance field."}, {"start_s": 23806.012, "end_s": 23816.314, "action": "Adjusted the camera around the building, selected the long rectangular object, and dragged it away from the wall into the open area.", "intent": "Reposition the rectangular component in the model.", "app": "SketchUp 2026", "details": "The final view shows the selected object separated from the wall with the move operation active."}, {"start_s": 23816.314, "end_s": 23826.809, "action": "Selected the detached rectangular object and activated the Rotate tool, then set its rotation center and rotated it to 180 degrees.", "intent": "Rotate the component to change its orientation.", "app": "SketchUp 2026", "details": "The object remained selected with the rotation protractor visible and the angle field showing 180.0."}, {"start_s": 23826.809, "end_s": 23836.919, "action": "Continued rotating and adjusting the selected rectangular component while orbiting and scrolling the view around the building frontage.", "intent": "Refine the component\u2019s orientation and inspect its placement.", "app": "SketchUp 2026", "details": "The component stayed highlighted in blue with rotation controls visible."}, {"start_s": 23836.919, "end_s": 23845.854, "action": "Exited the active manipulation and navigated the model view, leaving the long rectangular component positioned separately in front of the building.", "intent": "Review the component\u2019s resulting placement.", "app": "SketchUp 2026", "details": "The object was no longer highlighted, and the camera shifted to a wider frontal view."}, {"start_s": 23845.854, "end_s": 23855.005, "action": "Scrolled and adjusted the view, then selected the detached rectangular component and began moving it again.", "intent": "Continue positioning the component relative to the building.", "app": "SketchUp 2026", "details": "The final screenshot shows the object highlighted in blue with the move tool active."}, {"start_s": 23855.005, "end_s": 23864.944, "action": "Navigated around the SketchUp model with repeated scrolling and middle-button view adjustments, then selected the long rail-like component and activated Push/Pull on its end face.", "intent": "Inspect and modify the selected model component.", "app": "SketchUp", "details": "The view shifted from the building interior to a close-up of the outlined rail-like object; Push/Pull was active at the end."}, {"start_s": 23864.944, "end_s": 23875.038, "action": "Continued orbiting and zooming around the rail-like component, selected its end geometry, and used Push/Pull; the distance field visibly showed approximately 8 5/16 inches before returning to a wider model view.", "intent": "Adjust the component\u2019s geometry while checking its placement in the model.", "app": "SketchUp", "details": "The edited component remained visible against the surrounding building model."}, {"start_s": 23875.038, "end_s": 23884.704, "action": "Navigated to another end of the model with middle-button view movements, entered a short keyboard input, and switched to the Tape Measure tool to inspect or create a measurement on the component.", "intent": "Measure or reference the selected geometry.", "app": "SketchUp", "details": "The Tape Measure cursor and an Area value of 66.7 in\u00b2 were visible near the close-up end geometry."}, {"start_s": 23884.704, "end_s": 23895.118, "action": "Continued inspecting the isolated rail-like component with orbiting and zooming, used the Tape Measure tool, and selected the component so its edges became highlighted in blue.", "intent": "Review and select the edited geometry for further work.", "app": "SketchUp", "details": "The final view showed the long component outlined in blue, indicating selection."}, {"start_s": 23895.118, "end_s": 23909.683, "action": "Worked on the selected component with repeated clicks and drags, entered dimension text including 8 followed by Enter, and navigated the view; the SketchUp window then resized and switched to the application window.", "intent": "Apply a dimensional adjustment and continue inspecting the model.", "app": "SketchUp", "details": "The component remained selected during the dimensional entry and final view change."}, {"start_s": 23909.683, "end_s": 23919.951, "action": "Restored and repositioned the SketchUp window, opened the Default Tray with the Materials panel, and navigated around the selected component with scrolling and middle-button view adjustments.", "intent": "Reorient the workspace and inspect or prepare to apply a material.", "app": "SketchUp", "details": "The Materials panel was visible with the material name M09_Shadow_Night and color swatches."}, {"start_s": 23919.951, "end_s": 23930.005, "action": "Navigated around the SketchUp model with repeated view adjustments, clicked and dragged on the geometry, and typed briefly while working near the window and trim elements.", "intent": "Inspect or modify the modeled architectural geometry.", "app": "SketchUp", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 23930.005, "end_s": 23940.327, "action": "Adjusted the 3D view through repeated orbit/zoom motions, clicked model geometry, and interacted with the materials area while repositioning the camera around the trim pieces.", "intent": "Inspect the model and possibly prepare or apply a material.", "app": "SketchUp", "details": "The view changed from a wider floor-level view to a close-up of a black-edged translucent trim object."}, {"start_s": 23940.327, "end_s": 23950.465, "action": "Navigated around the model with extensive orbit and zoom motions, clicked several geometry points, and briefly typed while reviewing the black-edged trim and surrounding architectural elements.", "intent": "Continue inspecting the model from different viewpoints.", "app": "SketchUp", "details": "The materials tray remained visible and the model view shifted to show multiple trim pieces and adjacent walls."}, {"start_s": 23950.465, "end_s": 23960.343, "action": "Changed the view around a long trim element, clicked and dragged on the model and materials tray, and ended by activating the paint tool on a close-up corner.", "intent": "Apply or inspect material assignment on the trim geometry.", "app": "SketchUp", "details": "The close-up showed black top and side edges on a translucent framed element; M09_Shadow_Night remained shown in the Materials tray."}, {"start_s": 23960.343, "end_s": 23970.009, "action": "Orbited and zoomed out to review several modeled trim pieces, clicked model faces and the materials tray, and finished with the paint tool active on a selected framed element.", "intent": "Paint or inspect connected faces on the modeled trim.", "app": "SketchUp", "details": "The view progressed from a close-up to a wider architectural scene, then back to a close-up of the black-edged frame."}, {"start_s": 23970.009, "end_s": 23979.63, "action": "Clicked and orbited around the close-up frame, used a keyboard command, and continued painting or sampling connected faces while zooming toward a large black face.", "intent": "Continue applying or sampling the selected material on connected model faces.", "app": "SketchUp", "details": "The Paint Bucket tool was active, the materials tray showed M09_Shadow_Night, and the final view was dominated by a black face."}, {"start_s": 23979.63, "end_s": 23990.144, "action": "Navigated around the SketchUp model with scrolling and orbiting, clicked and dragged on the foreground rectangular structure, and made brief keyboard inputs while inspecting it.", "intent": "Inspect and adjust the view or selection of the foreground model component.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 23990.144, "end_s": 24000.275, "action": "Zoomed and orbited from the close-up structure to a wider view of the building, then clicked and dragged near the foreground component, leaving a selected rectangular element visible.", "intent": "Reframe the model and select a component for further editing.", "app": "SketchUp 2026", "details": "The view changed from the building fa\u00e7ade to a close-up selected rectangular frame with a blue edge."}, {"start_s": 24000.275, "end_s": 24011.211, "action": "Clicked around the selected rectangular frame, orbited and scrolled the view, entered a brief keyboard input, and used the Push/Pull tool on a face before orbiting again.", "intent": "Edit the geometry of the selected rectangular frame and inspect the result from different angles.", "app": "SketchUp 2026", "details": "Push/Pull tool was active and the selected component remained enclosed by a dotted bounding box."}, {"start_s": 24011.211, "end_s": 24021.84, "action": "Orbited to the opposite end of the rectangular frame, clicked its end face, and used Push/Pull interactions while scrolling and adjusting the close-up view.", "intent": "Modify or inspect the end geometry of the selected frame.", "app": "SketchUp 2026", "details": "Push/Pull cursor and an approximate distance readout were visible on the selected end area."}, {"start_s": 24021.84, "end_s": 24031.863, "action": "Clicked and selected faces around the frame corner, orbited and zoomed closer, and continued manipulating the corner area with selection and drag actions.", "intent": "Refine the corner geometry and inspect the edited frame from a closer angle.", "app": "SketchUp 2026", "details": "The close-up showed the black top perimeter and translucent side faces of the selected structure."}, {"start_s": 24031.863, "end_s": 24041.589, "action": "Selected the rectangular component, clicked and dragged near its lower edge, then orbited and zoomed away to view the surrounding building and adjacent frame sections.", "intent": "Inspect the edited component in context and adjust the model view.", "app": "SketchUp 2026", "details": "The component was highlighted in blue initially; the final view showed the foreground frame beside the building fa\u00e7ade."}, {"start_s": 24041.589, "end_s": 24051.674, "action": "Scrolled and adjusted the SketchUp view, entered measurements including 1 and 15/16, and repositioned the visible model detail near the wall edge.", "intent": "Refine the geometry or placement of a model component using numeric dimensions.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 24051.674, "end_s": 24061.439, "action": "Selected the long rectangular component, moved it with the Move tool using a typed distance, and navigated the view around the model.", "intent": "Position the selected rectangular architectural component in the model.", "app": "SketchUp 2026", "details": "The component remained highlighted in blue after the move."}, {"start_s": 24061.439, "end_s": 24071.184, "action": "Continued moving and inspecting the selected rectangular component while orbiting and zooming around its corner and adjacent wall.", "intent": "Align or verify the component\u2019s placement against surrounding geometry.", "app": "SketchUp 2026", "details": "The selected component stayed highlighted and the Move tool distance readout changed."}, {"start_s": 24071.184, "end_s": 24081.223, "action": "Adjusted the selected component with additional Move-tool operations and navigated to a wider view of the wall and railing assembly.", "intent": "Continue aligning the architectural component within the model.", "app": "SketchUp 2026", "details": "The view ended with the model shown from a broader angle and the component no longer prominently highlighted."}, {"start_s": 24081.223, "end_s": 24091.372, "action": "Selected the long railing-like component, moved it, and entered keyboard inputs including 1 followed by Enter while inspecting the result.", "intent": "Modify the position or dimension of the railing-like model component.", "app": "SketchUp 2026", "details": "The component was highlighted in blue in the later view."}, {"start_s": 24091.372, "end_s": 24101.665, "action": "Navigated around the selected railing assembly, adjusted the view, and opened the Edit menu, leaving Purge Unused Assets highlighted.", "intent": "Inspect the model and access a cleanup command.", "app": "SketchUp 2026", "details": "The final screen showed the Edit menu over a wider model view."}, {"start_s": 24101.665, "end_s": 24112.149, "action": "Navigated around the SketchUp model with repeated orbiting and scrolling, then selected and adjusted the long rectangular planter-like object near the building.", "intent": "Inspect and position the modeled exterior object.", "app": "SketchUp 2026", "details": "The Materials tray remained open with M09_Shadow_Night displayed."}, {"start_s": 24112.149, "end_s": 24121.917, "action": "Orbited and zoomed around the rectangular object, sampled or applied a material, and selected the object for further editing.", "intent": "Inspect the object and prepare it for modification or material editing.", "app": "SketchUp 2026", "details": "The object was shown from different angles and became outlined in blue when selected."}, {"start_s": 24121.917, "end_s": 24128.79, "action": "Moved the selected object using the Move tool and adjusted its placement while viewing the planter-like geometry from an angled perspective.", "intent": "Reposition the modeled object in the scene.", "app": "SketchUp 2026", "details": "The Move tool was active and the status bar showed a distance of approximately 2 9/16 inches."}, {"start_s": 24128.79, "end_s": 24139.026, "action": "Entered a distance of 4 and confirmed it, then orbited and zoomed to inspect the resulting placement near the building facade.", "intent": "Set a precise movement distance and verify the object position.", "app": "SketchUp 2026", "details": "The Move tool displayed the entered value 4 before the view changed to a close-up of the planter end."}, {"start_s": 24139.026, "end_s": 24149.085, "action": "Navigated around the model and used the Paint Bucket/material tool on the planter-like object, changing the visible faces from white to a very dark or black material.", "intent": "Apply or test the M09_Shadow_Night material on the modeled object.", "app": "SketchUp 2026", "details": "The Materials tray showed M09_Shadow_Night, and the object\u2019s end and side faces appeared black after painting."}, {"start_s": 24149.085, "end_s": 24159.589, "action": "Continued painting and selecting connected faces while orbiting and zooming closely around the object, leaving a large side face dark and selected.", "intent": "Refine the material application across the object\u2019s connected faces.", "app": "SketchUp 2026", "details": "The final view showed the dark face outlined in blue with the Paint Bucket tool active."}, {"start_s": 24159.589, "end_s": 24170.165, "action": "Selected the planter-like front object, adjusted its geometry with dragging, and positioned the copy tool at a corner while viewing the close-up model.", "intent": "Modify and position a front architectural element.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 24170.165, "end_s": 24180.107, "action": "Entered a distance value of 4 inches, confirmed it, applied the selected material to the model, and orbited/zoomed out to inspect the building front.", "intent": "Set a precise dimension and inspect the resulting architectural element.", "app": "SketchUp 2026", "details": "The view changed from a close-up planter to a broader building facade."}, {"start_s": 24180.107, "end_s": 24189.831, "action": "Orbited and zoomed around the model, moving from the front planter to a wider overhead view of the building layout.", "intent": "Review the model from broader angles.", "app": "SketchUp 2026", "details": "The building complex and interior partitions became visible."}, {"start_s": 24189.831, "end_s": 24199.707, "action": "Continued orbiting and zooming around the building, inspecting the rows of rooms, doors, windows, and front planter elements from elevated angles.", "intent": "Survey the completed architectural arrangement.", "app": "SketchUp 2026", "details": "No distinct geometry edit was visible; activity primarily navigated the 3D view."}, {"start_s": 24199.707, "end_s": 24209.565, "action": "Navigated back toward a front corner, zoomed into the planter and facade, and clicked the visible architectural element while changing the active material context.", "intent": "Inspect and select a facade or planter component.", "app": "SketchUp 2026", "details": "The view ended on a close-up of a white planter beside a door."}, {"start_s": 24209.565, "end_s": 24219.531, "action": "Orbited and zoomed around the selected planter and adjacent facade, then reviewed the front door, window, and surrounding white wall from a closer angle.", "intent": "Inspect the facade element and its placement against the building.", "app": "SketchUp 2026", "details": "The Materials tray showed the Default material at the end."}, {"start_s": 24219.531, "end_s": 24228.928, "action": "Navigated around the SketchUp model with repeated scrolls and clicks, then activated a guide-related tool and positioned the view close to a black horizontal element.", "intent": "Inspect and prepare a precise guide or measurement on the model.", "app": "SketchUp 2026", "details": "The view changed from an exterior building overview to a close-up with a guide-placement cursor and visible Length field."}, {"start_s": 24228.928, "end_s": 24239.202, "action": "Entered numeric values 1 and 15/16 in the active SketchUp input, confirming each with Enter, while clicking and scrolling around the close-up geometry.", "intent": "Set precise dimensions or offsets for the active guide operation.", "app": "SketchUp 2026", "details": "The visible Length field showed entered values including 1 and approximately 1 13/16 inches."}, {"start_s": 24239.202, "end_s": 24249.691, "action": "Dragged and clicked geometry, entered 1, and navigated through the model with extensive scrolling; then activated a move/copy operation on a selected railing-like component.", "intent": "Position or duplicate a model component using a measured offset.", "app": "SketchUp 2026", "details": "The view ended on a selected transparent railing/frame component with a Distance readout of approximately 2 feet 2 3/16 inches."}, {"start_s": 24249.691, "end_s": 24259.472, "action": "Continued orbiting or zooming around the selected railing/frame component and clicked its end points, leaving the component selected with a move/copy distance readout.", "intent": "Refine the placement of the selected railing or frame component.", "app": "SketchUp 2026", "details": "The displayed distance increased to approximately 21 feet 3 3/8 inches."}, {"start_s": 24259.472, "end_s": 24269.472, "action": "Navigated outward through the SketchUp model with scrolls and clicks, then changed to broader exterior views showing multiple repeated building units and railings.", "intent": "Review the larger model layout and inspect copied or positioned components.", "app": "SketchUp 2026", "details": "The final view showed several connected building units from an exterior angle."}, {"start_s": 24269.472, "end_s": 24280.43, "action": "Scrolled and orbited across the building model, clicked model elements, and ended by activating the Paint Bucket/material sampling tool on a close-up railing or wall area.", "intent": "Inspect model surfaces and prepare to sample or apply a material.", "app": "SketchUp 2026", "details": "The status bar indicated that clicking a face would load its material into the Paint Bucket."}, {"start_s": 24280.43, "end_s": 24290.396, "action": "Orbit and zoom around the balcony railing, clicking and scrolling to inspect the glass panel and dark frame from changing angles.", "intent": "Inspect the balcony railing geometry and appearance.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24290.396, "end_s": 24300.297, "action": "Continued orbiting and zooming around the balcony corner, moving from the railing toward the door-side exterior and selecting visible model areas.", "intent": "Review the railing assembly and its connection to the building exterior.", "app": "SketchUp 2026", "details": "The view shifted to show the balcony corner, door, and transparent railing."}, {"start_s": 24300.297, "end_s": 24310.56, "action": "Zoomed out to review the full building layout, then orbited and zoomed back toward a balcony corner for closer inspection.", "intent": "Compare the balcony detail with the overall architectural model.", "app": "SketchUp 2026", "details": "The model changed from a close-up to a wide multi-unit view and back to a railing corner."}, {"start_s": 24310.56, "end_s": 24320.804, "action": "Clicked and dragged around the selected balcony edge while orbiting and zooming through close views of the railing base and surrounding walls.", "intent": "Inspect or adjust the balcony railing edge and base geometry.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; the view remained focused on translucent railing panels and white base surfaces."}, {"start_s": 24320.804, "end_s": 24331.319, "action": "Clicked repeatedly around the railing and adjacent wall, scrolled through close views, and dragged to reposition the camera toward the building exterior.", "intent": "Continue examining the balcony assembly and nearby facade.", "app": "SketchUp 2026", "details": "The camera moved from a railing corner to a broader exterior view with doors and balcony elements."}, {"start_s": 24331.319, "end_s": 24341.623, "action": "Orbited and zoomed around the front balcony, inspecting the door, window, dark railing frame, and transparent panels before moving into another close-up of the railing base.", "intent": "Review balcony railing placement and appearance from multiple exterior angles.", "app": "SketchUp 2026", "details": "Materials tray stayed open; the final view was a close-up of the transparent railing and white ledge."}, {"start_s": 24341.623, "end_s": 24351.606, "action": "Navigated around the SketchUp building model with repeated clicks, drags, and scrolls, then activated the Paint Bucket/material tool and moved to another balcony edge.", "intent": "Inspect the model and prepare to apply or sample a material.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night and Solid Colors."}, {"start_s": 24351.606, "end_s": 24361.636, "action": "Continued orbiting and zooming around the balcony and window area, clicked model surfaces, and briefly entered keyboard input while repositioning the view.", "intent": "Inspect and possibly edit or texture the selected architectural surfaces.", "app": "SketchUp 2026", "details": "The view remained focused on balcony slabs, walls, and glazing."}, {"start_s": 24361.636, "end_s": 24371.36, "action": "Clicked and dragged across the model while orbiting and scrolling out from a close balcony view to a broader exterior view of the building.", "intent": "Review the building exterior and reposition the camera.", "app": "SketchUp 2026", "details": "The final view showed multiple rooms, doors, windows, and balcony railings."}, {"start_s": 24371.36, "end_s": 24381.361, "action": "Zoomed and orbited across the building, moving from an overview into a close-up of a balcony and door area with repeated middle-button navigation and clicks.", "intent": "Inspect different architectural elements from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24381.361, "end_s": 24391.409, "action": "Continued navigating through close views of balcony slabs and wall edges using clicks, drags, and scrolling, ending on a tight view of a long exterior ledge.", "intent": "Examine or position the view for work on the exterior surfaces.", "app": "SketchUp 2026", "details": "No clearly visible geometry change was established."}, {"start_s": 24391.409, "end_s": 24401.617, "action": "Orbited and zoomed around the balcony and building exterior, clicked and dragged on the model, and ended with a wider elevated view of the floor plan and multiple rooms.", "intent": "Review the model from close and overview perspectives.", "app": "SketchUp 2026", "details": "The final view showed the multi-room building layout with exterior balconies and doors."}, {"start_s": 24401.617, "end_s": 24411.07, "action": "Orbit and zoom closely around the building model, moving from an exterior corner toward a dark opening while the Materials tray remains visible.", "intent": "Inspect the model geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray shows the material name M09_Shadow_Night."}, {"start_s": 24411.07, "end_s": 24420.95, "action": "Continue orbiting, zooming, and panning around the lower wall and corner details; click and drag on the model and briefly interact with the Materials tray.", "intent": "Examine the junction and surrounding faces in the 3D model.", "app": "SketchUp 2026", "details": "The view stays tightly framed on gray and white architectural surfaces."}, {"start_s": 24420.95, "end_s": 24430.895, "action": "Select the paint/material tool and click or drag across several model surfaces while orbiting and zooming to adjacent walls and a frame-like element.", "intent": "Apply or inspect a material on connected model surfaces.", "app": "SketchUp 2026", "details": "The status bar identifies the active tool as painting an item or object; the Materials tray remains open."}, {"start_s": 24430.895, "end_s": 24440.523, "action": "Continue painting or selecting faces along the lower edge and corner, with repeated clicks, short drags, and view adjustments around the base trim.", "intent": "Refine the material assignment on the model's lower surfaces.", "app": "SketchUp 2026", "details": "A long lower face becomes highlighted with a blue outline and stippled selection pattern near the end."}, {"start_s": 24440.523, "end_s": 24450.559, "action": "Orbit and zoom out along the building edge, then select additional faces and choose a purple material from the Materials tray while continuing paint-tool clicks.", "intent": "Change or extend the material treatment across the building edge.", "app": "SketchUp 2026", "details": "The Materials tray visibly switches from yellow/brown swatches to purple swatches, and a lower face remains selected."}, {"start_s": 24450.559, "end_s": 24460.364, "action": "Paint or select more edge and corner faces, then orbit and zoom out to reveal a wider view of the building interior and surrounding walls.", "intent": "Continue material editing and review the model from a broader viewpoint.", "app": "SketchUp 2026", "details": "The final view shows multiple rooms and wall sections; the Materials tray still displays purple swatches and M09_Shadow_Night."}, {"start_s": 24460.364, "end_s": 24471.382, "action": "Orbited and zoomed through the SketchUp apartment model, moving from an overall building view to a close-up of an interior corner.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24471.382, "end_s": 24481.518, "action": "Selected the paint tool and navigated around the close-up model view while scrolling and clicking on visible surfaces.", "intent": "Work with or inspect surface materials in the model.", "app": "SketchUp 2026", "details": "Status bar indicated the paint tool was active."}, {"start_s": 24481.518, "end_s": 24491.007, "action": "Clicked and scrolled around the model, applying or previewing a dark material on exterior and interior surfaces before returning to an exterior railing view.", "intent": "Modify or inspect material appearance on model surfaces.", "app": "SketchUp 2026", "details": "The close-up view showed darkened wall and railing components, with M09_Shadow_Night visible in the Materials tray."}, {"start_s": 24491.007, "end_s": 24499.93, "action": "Orbited and zoomed out across the building, transitioning from a close exterior view to a wider view of the apartment units.", "intent": "Review the model from broader perspectives.", "app": "SketchUp 2026", "details": "No new tool or dialog was visible."}, {"start_s": 24499.93, "end_s": 24509.379, "action": "Continued orbiting and zooming around the apartment model, moving from a close view of rooms and doors to a distant view showing two building layouts.", "intent": "Inspect the overall model arrangement.", "app": "SketchUp 2026", "details": "The Materials tray remained open."}, {"start_s": 24509.379, "end_s": 24519.721, "action": "Orbited and adjusted the view to compare the two building layouts from an elevated, near-top perspective.", "intent": "Review the overall floor-plan and building layout.", "app": "SketchUp 2026", "details": "The final view showed both structures with rooms, stairs, doors, and windows visible."}, {"start_s": 24519.721, "end_s": 24528.309, "action": "Navigated around the SketchUp architectural model with repeated middle-button orbiting and scrolling, moving from an overview of two floor-plan views into a close-up of the stair and room area.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 24528.309, "end_s": 24538.601, "action": "Scrolled and adjusted the model view, then pressed a key that switched to a drawing tool; zoomed toward the upper rooms and left the tool active with a first-corner prompt visible.", "intent": "Prepare to draw or edit geometry in the model.", "app": "SketchUp 2026", "details": "The status bar indicated a drawing operation awaiting the first corner."}, {"start_s": 24538.601, "end_s": 24548.129, "action": "Pressed Space to change tools, clicked and dragged repeatedly around the floor-plan geometry, and orbited the model through several viewpoints, ending on a wider view of the building.", "intent": "Select or manipulate architectural geometry while inspecting the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 24548.129, "end_s": 24558.425, "action": "Scrolled and clicked repeatedly around a room area, used keyboard commands, then dragged across the model; the view moved from a close-up of a room fixture to a selected upper portion of the building.", "intent": "Edit or select geometry in the architectural model.", "app": "SketchUp 2026", "details": "A dotted selection boundary was visible around part of the model near the end of the span."}, {"start_s": 24558.425, "end_s": 24568.397, "action": "Dragged and scrolled around the selected model area, orbited to a close-up of a room fixture, and clicked repeatedly while adjusting the view and selection.", "intent": "Refine the view or geometry selection in the room area.", "app": "SketchUp 2026", "details": null}, {"start_s": 24568.397, "end_s": 24579.232, "action": "Pressed drawing-tool shortcuts, clicked and dragged across the close-up room surface, and created or adjusted a straight edge; the final view showed the edge selected across the white surface.", "intent": "Draw or modify a line segment on the model surface.", "app": "SketchUp 2026", "details": "The dimensions readout appeared during the drawing operation, and the final edge was highlighted blue."}, {"start_s": 24579.232, "end_s": 24588.877, "action": "Selected and dragged across the model, then activated the Line tool and began positioning a line endpoint along the upper wall edge.", "intent": "Edit the building model by adding or adjusting a line.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 24588.877, "end_s": 24598.639, "action": "Changed the model view with orbiting and dragging, then repositioned the camera to reveal more of the floor plan and surrounding walls.", "intent": "Inspect the model from a different angle.", "app": "SketchUp 2026", "details": "The view shifted from a close wall/floor area to a broader overhead interior view."}, {"start_s": 24598.639, "end_s": 24610.013, "action": "Scrolled and orbited extensively, zooming out from the close interior area to an overhead view of the multi-room building layout.", "intent": "Review the overall building model and navigate to another work area.", "app": "SketchUp 2026", "details": "The final view showed the upper-floor room arrangement, walls, openings, and stair area."}, {"start_s": 24610.013, "end_s": 24620.063, "action": "Navigated and zoomed around the upper-floor rooms, then activated the Line tool and positioned a line along an interior wall or floor boundary.", "intent": "Add or adjust a line in the building interior.", "app": "SketchUp 2026", "details": "The model remained in an overhead interior view with multiple rooms visible."}, {"start_s": 24620.063, "end_s": 24630.141, "action": "Scrolled and orbited through the model, zooming between close wall views and the broader floor plan, then selected the Line tool and began another line placement.", "intent": "Inspect the layout and continue drawing or editing model geometry.", "app": "SketchUp 2026", "details": "The view ended on a distant overhead perspective of the building."}, {"start_s": 24630.141, "end_s": 24640.015, "action": "Orbited and zoomed into the furnished interior, then clicked around the central bathroom and adjacent rooms while continuing model inspection.", "intent": "Examine interior details and navigate within the building model.", "app": "SketchUp 2026", "details": "The final view showed furnished rooms, doors, windows, and a central bathroom area."}, {"start_s": 24640.015, "end_s": 24650.954, "action": "Navigated around the SketchUp house model with repeated scrolls, clicks, and middle-button orbiting, changing from an overhead room view to a closer angled view of the rooms and walls.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24650.954, "end_s": 24660.681, "action": "Activated Push/Pull, entered a 1-inch distance, and applied it to a selected face; continued orbiting and scrolling, ending on a close view of a wall and floor corner.", "intent": "Modify the selected model face by a measured one-inch extrusion or inset.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly showed 1\"."}, {"start_s": 24660.681, "end_s": 24670.487, "action": "Scrolled and orbited through the model, then zoomed or navigated back to an overhead view showing the full house layout and a neighboring model.", "intent": "Review the model after the face edit and reposition the camera.", "app": "SketchUp 2026", "details": "Push/Pull remained active during the close-up portion."}, {"start_s": 24670.487, "end_s": 24680.029, "action": "Navigated toward a doorway and corridor with repeated scrolling and middle-button orbiting, then clicked and dragged around the door and adjacent floor area while continuing to inspect the geometry.", "intent": "Inspect and possibly adjust geometry around the doorway and floor.", "app": "SketchUp 2026", "details": "The view ended in a close-up of doors, walls, and a patterned floor strip."}, {"start_s": 24680.029, "end_s": 24690.037, "action": "Performed sustained click-drag interactions across the close-up floor and wall area, repositioning the camera or manipulating nearby geometry while scrolling intermittently.", "intent": "Continue examining or editing the detailed floor and wall region.", "app": "SketchUp 2026", "details": "The patterned floor strip and surrounding white faces remained visible; no specific tool change was shown."}, {"start_s": 24690.037, "end_s": 24700.377, "action": "Continued extensive click-drag navigation, then orbited and zoomed out to reveal both house models in an overall isometric view.", "intent": "Finish the inspection with a broad view of the modeled structures.", "app": "SketchUp 2026", "details": "The final view showed two building layouts side by side, with the Materials tray still open."}, {"start_s": 24700.377, "end_s": 24709.125, "action": "Scrolled repeatedly through the SketchUp floor-plan model, typed a character, and clicked in the drawing area, leaving a closer view of the upper rooms with the drawing tool active.", "intent": "Navigate and position the model for editing.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24709.125, "end_s": 24718.161, "action": "Scrolled repeatedly to reposition and zoom the floor plan, leaving the building outline selected in blue and the endpoint marker visible near the lower-right corner.", "intent": "Inspect or adjust the selected building geometry.", "app": "SketchUp 2026", "details": "The status bar showed an active drawing operation with dimensions."}, {"start_s": 24718.161, "end_s": 24728.252, "action": "Clicked and scrolled around the model, then used middle-button navigation to zoom far out and orbit to an overall view showing two building models.", "intent": "Change the camera view to inspect the broader model context.", "app": "SketchUp 2026", "details": "The final view showed both building structures in the workspace."}, {"start_s": 24728.252, "end_s": 24739.635, "action": "Scrolled and orbited around the model, then selected the main building geometry so its floor surfaces and edges became highlighted blue.", "intent": "Inspect and select the main building geometry.", "app": "SketchUp 2026", "details": "The selected building was shown from an elevated front perspective."}, {"start_s": 24739.635, "end_s": 24748.011, "action": "Clicked and scrolled to adjust the camera, maintaining the selected blue-highlighted floor-plan geometry in a slightly reframed view.", "intent": "Review the selected building from another viewpoint.", "app": "SketchUp 2026", "details": "No visible geometry edit was completed."}, {"start_s": 24748.011, "end_s": 24758.148, "action": "Right-clicked the selected geometry to open its context menu, clicked within the model, and left the building visible with selection highlighting reduced.", "intent": "Access options for the selected SketchUp geometry and continue inspection.", "app": "SketchUp 2026", "details": "The context menu included Entity Info, Erase, Hide, Make Group, Intersect Faces, and V-Ray options."}, {"start_s": 24758.148, "end_s": 24768.086, "action": "Selected and navigated around the building model, zooming and orbiting to inspect the floor layout while the Materials tray remained open.", "intent": "Inspect the model from different views.", "app": "SketchUp 2026", "details": "The view changed from a close angled floor plan to a more distant top view."}, {"start_s": 24768.086, "end_s": 24777.872, "action": "Activated Push/Pull and selected the large top face, then adjusted the view while the face remained highlighted and a distance readout was shown.", "intent": "Modify or inspect the selected building face.", "app": "SketchUp 2026", "details": "The selected face was displayed with a stippled highlight; the visible distance changed during navigation."}, {"start_s": 24777.872, "end_s": 24787.749, "action": "Exited the prior face-editing state and extensively zoomed and orbited around the model, ending on a distant top-down view of the floor plan.", "intent": "Review the building layout from different viewpoints.", "app": "SketchUp 2026", "details": "The view briefly became extremely close before returning to an overall floor-plan view."}, {"start_s": 24787.749, "end_s": 24797.953, "action": "Selected the building face and used Push/Pull and view navigation, changing from an angled overall view to a close inspection of the central and lower rooms.", "intent": "Inspect or adjust the building geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the model face was selected during part of the span."}, {"start_s": 24797.953, "end_s": 24807.829, "action": "Selected the large face, entered a Push/Pull distance of 6, and confirmed it; the face remained highlighted with the distance field showing 6.", "intent": "Set the extrusion depth of the selected face.", "app": "SketchUp 2026", "details": "The visible Push/Pull distance readout was 6."}, {"start_s": 24807.829, "end_s": 24817.549, "action": "Orbited and zoomed the model from a front exterior view to a very close view of a wall or roof edge, with additional selections and navigation.", "intent": "Inspect the resulting model geometry from exterior views.", "app": "SketchUp 2026", "details": "The model shifted from a visible facade with doors and windows to a close-up of a narrow wall edge."}, {"start_s": 24817.549, "end_s": 24826.848, "action": "Clicked and scrolled repeatedly in the SketchUp model, then selected and manipulated a face with the active Push/Pull tool, changing the displayed distance and view.", "intent": "Modify the selected model face using Push/Pull.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24826.848, "end_s": 24836.812, "action": "Clicked several model faces and scrolled while navigating the view, then selected a long narrow face and used Push/Pull, leaving it isolated in the viewport.", "intent": "Continue editing model geometry with Push/Pull.", "app": "SketchUp 2026", "details": "The model view changed from a large selected floor-like surface to a close view of a narrow extruded piece."}, {"start_s": 24836.812, "end_s": 24846.832, "action": "Clicked and dragged across narrow model geometry while scrolling and changing the view, then selected another face for Push/Pull editing.", "intent": "Adjust and inspect narrow model components.", "app": "SketchUp 2026", "details": "The viewport alternated between an isolated narrow line-like piece and a close-up of an extruded strip beside a larger surface."}, {"start_s": 24846.832, "end_s": 24856.536, "action": "Selected multiple faces and scrolled through the model, then dragged and clicked on narrow extruded pieces while continuing Push/Pull editing.", "intent": "Modify and inspect repeated narrow geometry on the model.", "app": "SketchUp 2026", "details": "The view showed several narrow rectangular pieces on a large white surface; the Materials tray remained visible."}, {"start_s": 24856.536, "end_s": 24866.75, "action": "Clicked and dragged on additional narrow faces, scrolled to reposition the view, and continued selecting geometry with Push/Pull active.", "intent": "Continue shaping and reviewing model components.", "app": "SketchUp 2026", "details": "The viewport moved from an isolated strip to a close-up beside the model perimeter."}, {"start_s": 24866.75, "end_s": 24877.421, "action": "Entered a control-key event, scrolled and clicked around the model perimeter, then selected a broad face and continued navigating the view.", "intent": "Inspect and prepare another model face for editing.", "app": "SketchUp 2026", "details": "The final view showed a large selected stippled face next to the model edge with Push/Pull still active."}, {"start_s": 24877.421, "end_s": 24887.898, "action": "Scrolled and orbited around the SketchUp building model, clicking and middle-dragging to inspect different roof and wall views.", "intent": "Inspect the 3D model from multiple angles.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24887.898, "end_s": 24898.522, "action": "Continued orbiting and scrolling around the building, then selected and inspected roof and wall geometry from a more elevated front view.", "intent": "Review the model geometry and viewpoint.", "app": "SketchUp 2026", "details": "The model view changed from a close roof edge to an elevated view showing the building facade."}, {"start_s": 24898.522, "end_s": 24908.908, "action": "Typed a character, clicked and dragged across roof-edge faces, and used Push/Pull operations to modify selected geometry; then pressed undo near the end.", "intent": "Edit the roof-edge geometry in the SketchUp model.", "app": "SketchUp 2026", "details": "Push/Pull was active and the status bar showed a distance of about 2 inches."}, {"start_s": 24908.908, "end_s": 24919.927, "action": "Scrolled and orbited to reposition the model, selected roof-edge faces, and used Push/Pull to extend or adjust the visible roof and parapet geometry.", "intent": "Continue shaping the roof-edge elements.", "app": "SketchUp 2026", "details": "Push/Pull remained active; the displayed distance reached about 6 inches."}, {"start_s": 24919.927, "end_s": 24929.916, "action": "Scrolled and orbited around the building while selecting roof and wall faces, then applied additional Push/Pull adjustments to the upper perimeter geometry.", "intent": "Refine the building\u2019s upper roof and wall geometry.", "app": "SketchUp 2026", "details": "The view widened to show more of the roof and facade, with Push/Pull distance around 6 1/4 inches."}, {"start_s": 24929.916, "end_s": 24940.384, "action": "Continued selecting and manipulating roof-edge faces with Push/Pull, scrolled and orbited to inspect the result, and ended on a wider exterior view of the building.", "intent": "Finalize and inspect the roof-edge modification.", "app": "SketchUp 2026", "details": "The final view showed the full roof and facade; the Materials tray remained open."}, {"start_s": 24940.384, "end_s": 24949.652, "action": "Orbit and zoom around the building exterior, moving the view from a roof-level corner toward the door, window, and balcony area.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 24949.652, "end_s": 24959.569, "action": "Orbit and zoom around the facade, then activate Push/Pull and click-drag a wall face near the roof edge; enter brief keyboard input while adjusting the view.", "intent": "Modify or inspect the exterior wall geometry.", "app": "SketchUp 2026", "details": "Push/Pull tool was active near the end, with a wall face selected and distance shown as 0 inches."}, {"start_s": 24959.569, "end_s": 24970.521, "action": "Continue selecting and clicking wall edges and faces, activate Push/Pull, and drag the upper wall strip to adjust its depth while orbiting around the building.", "intent": "Shape the upper exterior wall or roof-edge geometry.", "app": "SketchUp 2026", "details": "A narrow upper wall face became highlighted and the displayed Push/Pull distance reached approximately 3 7/8 inches."}, {"start_s": 24970.521, "end_s": 24980.412, "action": "Orbit along the facade and click multiple wall and roof-edge elements, then drag a selected area while changing the viewpoint to show more of the building length.", "intent": "Continue editing and reviewing the exterior facade geometry.", "app": "SketchUp 2026", "details": "The view progressed from a close facade with balconies to a wider perspective of the building side."}, {"start_s": 24980.412, "end_s": 24991.377, "action": "Orbit and zoom around the building, selecting and dragging exterior elements near the upper wall and balcony areas while entering undo-like keyboard commands; finish on a higher view of the door and window facade.", "intent": "Review and refine the exterior model from multiple angles.", "app": "SketchUp 2026", "details": "The Materials tray remained visible; no specific completed geometry change was clearly established."}, {"start_s": 24991.377, "end_s": 25001.108, "action": "Orbit and zoom to another facade, select and drag upper wall or roof geometry, then move the selected element while inspecting the door, window, and balcony area.", "intent": "Adjust or inspect the upper exterior geometry.", "app": "SketchUp 2026", "details": "The final view showed a selected roof-edge element outlined in blue with a move distance of approximately 4 feet 3 1/8 inches."}, {"start_s": 25001.108, "end_s": 25011.209, "action": "Navigated around the SketchUp model with repeated middle-button view adjustments and scrolling, then clicked and typed briefly while changing the camera from a close-up of the rectangular slab to a wider view of the surrounding floor-plan models.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 25011.209, "end_s": 25021.023, "action": "Adjusted the camera around the slab, selected its geometry, and used the Eraser tool while zooming into the slab edge and nearby model area.", "intent": "Inspect and edit the slab geometry.", "app": "SketchUp 2026", "details": "The slab was visibly selected before the view zoomed tightly onto its edge."}, {"start_s": 25021.023, "end_s": 25031.012, "action": "Navigated and zoomed around the model, dragged across the scene with the Eraser tool active, and ended on a wider view showing multiple floor-plan structures and the slab.", "intent": "Review the model arrangement and modify or inspect geometry.", "app": "SketchUp 2026", "details": "The slab remained outlined by a selection box in the wider view."}, {"start_s": 25031.012, "end_s": 25041.488, "action": "Continued orbiting and zooming around the scene, then clicked the rectangular slab to select it while viewing the surrounding floor plans from above.", "intent": "Reposition the camera and select the slab for further work.", "app": "SketchUp 2026", "details": "The final view showed the slab selected in blue beside two floor-plan models."}, {"start_s": 25041.488, "end_s": 25050.945, "action": "Adjusted the view around the selected slab, activated a face-based editing tool, and entered the dimension `1'6\"` followed by Enter; the slab face displayed a dense dotted pattern and the status bar showed a distance measurement.", "intent": "Apply or set a measured geometric operation on the slab face.", "app": "SketchUp 2026", "details": "The Materials tray remained open; the selected slab face was shown close up."}, {"start_s": 25050.945, "end_s": 25060.213, "action": "Zoomed tightly to the slab edge, switched among face-editing and guide-related tools, dragged on the slab, and entered additional brief text while the face became patterned and the status bar showed changing distance values.", "intent": "Continue measured editing of the slab surface and edge.", "app": "SketchUp 2026", "details": "The final close-up showed the slab face with a dotted pattern and an active face-editing tool."}, {"start_s": 25060.213, "end_s": 25069.915, "action": "Entered a distance and used Push/Pull to raise the selected rectangular face, then adjusted the view around the resulting slab.", "intent": "Modify the slab height and inspect the result.", "app": "SketchUp 2026", "details": "Materials tray showed M09_Shadow_Night."}, {"start_s": 25069.915, "end_s": 25080.437, "action": "Entered another distance, navigated around the model, switched to the Tape Measure tool, and created a guide along the slab edge.", "intent": "Measure or align the slab geometry.", "app": "SketchUp 2026", "details": "A guide line was visible along the slab edge."}, {"start_s": 25080.437, "end_s": 25090.357, "action": "Navigated and selected geometry around the slab, then used the Tape Measure tool to place or adjust guide points near its edges.", "intent": "Inspect and establish reference guides on the model.", "app": "SketchUp 2026", "details": "The view shifted from the surrounding building to a close-up of the slab corner."}, {"start_s": 25090.357, "end_s": 25101.318, "action": "Entered a distance and continued orbiting and panning around the slab while placing or checking guide references.", "intent": "Review the slab dimensions and alignment from different views.", "app": "SketchUp 2026", "details": "The rectangular slab remained visible beside the building mass."}, {"start_s": 25101.318, "end_s": 25111.303, "action": "Selected the slab face and navigated around it, then used Push/Pull-related keyboard input and clicks to modify or inspect the face.", "intent": "Continue editing the slab geometry.", "app": "SketchUp 2026", "details": "The slab face became stippled/selected in the final view."}, {"start_s": 25111.303, "end_s": 25121.103, "action": "Navigated around the slab, selected or edited its face with Push/Pull-related input, and orbited to a wider final view.", "intent": "Refine and inspect the slab model from multiple angles.", "app": "SketchUp 2026", "details": "The final view showed the large rectangular slab and adjacent building geometry."}, {"start_s": 25121.103, "end_s": 25133.377, "action": "Adjusted the view around the large rectangular slab and interacted with its face using the active push/pull-style tool.", "intent": "Modify or inspect the slab geometry.", "app": "SketchUp 2026", "details": "The Materials tray showed M09_Shadow_Night."}, {"start_s": 25133.377, "end_s": 25142.715, "action": "Navigated the model with orbiting and zooming, then returned to a wider view showing the slab beside the building layout.", "intent": "Reposition the camera to inspect the model in context.", "app": "SketchUp 2026", "details": "The slab remained visible next to the building walls."}, {"start_s": 25142.715, "end_s": 25152.449, "action": "Selected the guide tool and placed or adjusted a guide along the slab edge while zooming and orbiting around the slab.", "intent": "Lay out or measure a reference on the slab.", "app": "SketchUp 2026", "details": "A purple guide and guide-placement cursor were visible on the slab edge."}, {"start_s": 25152.449, "end_s": 25163.199, "action": "Continued placing and adjusting a guide at the slab corner, then orbited to a different angle around the slab.", "intent": "Refine a reference line or measurement on the slab.", "app": "SketchUp 2026", "details": "The guide tool remained active and the slab corner stayed in view."}, {"start_s": 25163.199, "end_s": 25172.834, "action": "Entered a distance of 6 inches and confirmed it, then continued navigating and selected the slab edge.", "intent": "Set a precise guide or geometry distance.", "app": "SketchUp 2026", "details": "The visible measurement changed after the 6-inch entry and the tool returned to selection."}, {"start_s": 25172.834, "end_s": 25182.133, "action": "Orbited and zoomed around the slab, then placed or adjusted another guide along its front edge.", "intent": "Inspect the slab and establish another reference line.", "app": "SketchUp 2026", "details": "A guide line and placement marker were visible near the front edge."}, {"start_s": 25182.133, "end_s": 25192.159, "action": "Entered a 5-inch value and confirmed it, then used undo and clicked around the model while switching back to selection/orbit interaction.", "intent": "Adjust or inspect geometry dimensions in the SketchUp model.", "app": "SketchUp 2026", "details": "The view remained focused on a large slab-like model with the Materials tray open."}, {"start_s": 25192.159, "end_s": 25201.809, "action": "Clicked the slab area, entered a keyboard command, then selected the Push/Pull tool and dragged on the slab face, visibly highlighting the face and showing a distance readout.", "intent": "Modify the slab geometry with Push/Pull.", "app": "SketchUp 2026", "details": "The selected face displayed a purple stippled highlight and a distance value near the bottom right."}, {"start_s": 25201.809, "end_s": 25212.469, "action": "Opened the Edit menu, selected Delete Guides, then navigated and zoomed around the model before returning to the slab view.", "intent": "Remove guide lines and inspect the model geometry.", "app": "SketchUp 2026", "details": "The Edit menu visibly showed Delete Guides, and the later view showed the slab and surrounding building geometry."}, {"start_s": 25212.469, "end_s": 25222.201, "action": "Selected the slab and used the Move tool, dragging it while orbiting and zooming to reposition and inspect the building model.", "intent": "Move or align the selected slab relative to the building.", "app": "SketchUp 2026", "details": "The slab remained outlined in blue with Move tool grips and a distance readout."}, {"start_s": 25222.201, "end_s": 25233.281, "action": "Zoomed and orbited across the building, moving from an exterior overview to a close view of a doorway and roof edge while keeping the slab selected.", "intent": "Inspect the selected slab and nearby building details from different viewpoints.", "app": "SketchUp 2026", "details": "The final view closely framed a brown door, window, and the selected roof/slab edge."}, {"start_s": 25233.281, "end_s": 25242.864, "action": "Continued orbiting and zooming around the selected slab and building, ending on a close angled view of the roof edge, interior walls, doors, and balcony railings.", "intent": "Review the model placement and surrounding geometry.", "app": "SketchUp 2026", "details": "The slab stayed outlined in blue while the camera moved from an overview to a close side/interior perspective."}, {"start_s": 25242.864, "end_s": 25252.698, "action": "Navigated the SketchUp model with repeated middle-button orbit/zoom gestures and clicks, changing from a close-up to an elevated exterior view of the building.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 25252.698, "end_s": 25263.038, "action": "Orbited and zoomed around the building exterior, then switched tools and selected or manipulated model geometry near the roof and facade.", "intent": "Examine and possibly adjust the building geometry.", "app": "SketchUp 2026", "details": "The view moved from a close facade view to a wider roof view; selected geometry and inference guides appeared."}, {"start_s": 25263.038, "end_s": 25273.939, "action": "Continued orbiting around the roof and facade, clicked model faces, and used the Push/Pull tool before returning to a broader exterior view.", "intent": "Inspect or modify the roof and surrounding building surfaces.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance field showed approximately 11 1/2 inches."}, {"start_s": 25273.939, "end_s": 25285.178, "action": "Moved into a close-up of a roof edge, activated the Tape Measure tool, typed a value, and placed or adjusted a guide along the roof-side geometry.", "intent": "Measure or lay out a reference on the roof edge.", "app": "SketchUp 2026", "details": "The Tape Measure status bar indicated guide placement and a length of approximately 11 15/16 inches."}, {"start_s": 25285.178, "end_s": 25295.254, "action": "Orbited and zoomed away from the roof-edge close-up to inspect the building facade, doors, windows, and balcony railings from an oblique angle.", "intent": "Review the exterior model details from another viewpoint.", "app": "SketchUp 2026", "details": "The view ended on the front facade with the Materials tray still visible."}, {"start_s": 25295.254, "end_s": 25305.527, "action": "Continued orbiting and zooming around the building, moving across the roof and facade to a higher, more distant view of the roof and balcony structures.", "intent": "Inspect the overall roof and facade arrangement.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; the final view showed the roof prominently from above."}, {"start_s": 25305.527, "end_s": 25315.379, "action": "Orbited and zoomed around the building facade, repeatedly repositioning the camera to inspect the wall, doors, windows, and balcony areas.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 25315.379, "end_s": 25324.179, "action": "Entered short text inputs and clicked near the facade, then used orbiting and dragging to reposition the view around the upper wall and roof edge.", "intent": "Adjust the model view and begin an edit near the facade.", "app": "SketchUp 2026", "details": "Line tool status was visible during part of the span."}, {"start_s": 25324.179, "end_s": 25334.114, "action": "Orbited and zoomed around the building exterior, clicked near the upper wall and roof trim, and briefly dragged near the left toolbar before returning to the model view.", "intent": "Inspect and position the camera around the roof and facade details.", "app": "SketchUp 2026", "details": "The view progressed from a close-up roof corner to a wider facade view with a wall vent visible."}, {"start_s": 25334.114, "end_s": 25343.645, "action": "Repositioned the camera around the roof and wall junction, clicked repeatedly near the upper facade, and continued orbiting and zooming to examine the corner geometry.", "intent": "Inspect the roof trim and adjacent wall surfaces.", "app": "SketchUp 2026", "details": "Materials tray remained open; the view ended on a close-up of dark roof and wall framing."}, {"start_s": 25343.645, "end_s": 25353.372, "action": "Clicked and orbited around the upper facade, entered brief spacebar inputs, then opened the Edit menu and moved to the Delete command while selected geometry remained visible.", "intent": "Review or prepare to delete selected model geometry.", "app": "SketchUp 2026", "details": "The Edit menu was open with Delete highlighted at the end of the span."}, {"start_s": 25353.372, "end_s": 25362.914, "action": "Clicked in the open Edit menu, then orbited and zoomed around the roof and facade while making additional clicks; typed a character and activated the Line tool to start a line on the visible surface.", "intent": "Continue editing and begin drawing geometry on the model.", "app": "SketchUp 2026", "details": "The Line tool was active at the end, with a green inference point and Length field showing 5 inches."}, {"start_s": 25362.914, "end_s": 25371.523, "action": "Entered and revised numeric length values in the Measurements box while positioning a line endpoint, including 11, 15, and /16.", "intent": "Set a precise line length in the SketchUp model.", "app": "SketchUp 2026", "details": "The Line tool remained active and the Length field showed 11."}, {"start_s": 25371.523, "end_s": 25381.576, "action": "Edited the active length entry with backspaces and re-entered 11, 15, and /16-inch notation.", "intent": "Refine the line's precise measurement.", "app": "SketchUp 2026", "details": "The line endpoint and green inference preview remained visible."}, {"start_s": 25381.576, "end_s": 25391.644, "action": "Continued editing the measurement, then navigated the model with middle-button orbit/pan and scrolling; switched to the Select tool and changed the view to show the building facade.", "intent": "Inspect the model area after entering the measurement.", "app": "SketchUp 2026", "details": "The view changed from a close-up line preview to a facade with windows, a door, and a wall fixture."}, {"start_s": 25391.644, "end_s": 25402.452, "action": "Navigated around the facade with orbiting, panning, and scrolling, briefly selected or dragged near the wall fixture, and activated the Tape Measure tool while entering a measurement.", "intent": "Inspect and measure geometry on the building facade.", "app": "SketchUp 2026", "details": "The Measurements box displayed approximately 11 15/16\" and a guide/measurement marker appeared near the upper wall."}, {"start_s": 25402.452, "end_s": 25412.0, "action": "Orbited and panned upward across the building, clicked near the roof and wall edges, then entered additional measurement characters including 11.", "intent": "Continue inspecting and measuring the roof and facade geometry.", "app": "SketchUp 2026", "details": "The view moved from the roof and facade to a close-up of the roof edge."}, {"start_s": 25412.0, "end_s": 25423.107, "action": "Entered 11 and 15 into the active measurement field, then used backspaces to revise the entry while positioning the measurement endpoint.", "intent": "Adjust the precise measurement for the active guide or line.", "app": "SketchUp 2026", "details": "The Tape Measure tool remained active with a green inference line and the Length field showing 11."}, {"start_s": 25423.107, "end_s": 25434.61, "action": "Typed a comma followed by 15/16\" into the active SketchUp measurement field.", "intent": "Enter a precise dimension for the active drawing operation.", "app": "SketchUp 2026", "details": "The Length field was active and showed 11 before the text entry."}, {"start_s": 25434.61, "end_s": 25444.777, "action": "Confirmed the dimension with Enter, navigated around the model, and switched into guide-placement mode while entering a 5\" value.", "intent": "Apply the entered measurement and position a construction guide on the model.", "app": "SketchUp 2026", "details": "The status bar showed guide placement and the Length field showed 5\"."}, {"start_s": 25444.777, "end_s": 25455.018, "action": "Navigated and orbited around the building model, then continued positioning a construction guide across the roof and wall surfaces.", "intent": "Inspect the model and locate the guide placement area.", "app": "SketchUp 2026", "details": "The view shifted across roof and wall geometry while guide-placement mode remained active."}, {"start_s": 25455.018, "end_s": 25465.014, "action": "Navigated around the roof and wall, set a guide endpoint, and returned to a wider exterior view of the house.", "intent": "Place or adjust construction geometry while inspecting the exterior model.", "app": "SketchUp 2026", "details": "The final view showed the roof and front facade; the Length field displayed approximately 1' 5 15/16\"."}, {"start_s": 25465.014, "end_s": 25474.653, "action": "Navigated down toward the facade, positioned guide geometry near the wall and vent, and orbited to an elevated view of the house.", "intent": "Inspect and align construction guides against the building facade.", "app": "SketchUp 2026", "details": "The view moved from a close wall-and-vent view to an overhead exterior view."}, {"start_s": 25474.653, "end_s": 25484.896, "action": "Orbited and zoomed around the roof and upper facade, clicking near the roof edge and wall features while adjusting the guide placement.", "intent": "Refine guide positioning and inspect the corresponding exterior geometry.", "app": "SketchUp 2026", "details": "The final view showed the roof edge, door, windows, balcony, and wall vent with guide lines visible."}, {"start_s": 25484.896, "end_s": 25494.368, "action": "Adjusted the SketchUp view around the building roof with clicks, scrolling, and orbiting, then began drawing a rectangular element or guide on the roof surface.", "intent": "Model or position a roof detail.", "app": "SketchUp 2026", "details": "A rectangular outline and dimensional readout were visible on the roof."}, {"start_s": 25494.368, "end_s": 25504.174, "action": "Selected and orbited the model, changing the camera to an underside view of the building and roof while navigating around the active geometry.", "intent": "Inspect the roof and building geometry from another viewpoint.", "app": "SketchUp 2026", "details": "The view ended beneath the roof with the orbit tool active."}, {"start_s": 25504.174, "end_s": 25514.498, "action": "Navigated around the exterior with orbiting and scrolling, then placed or adjusted a guide near the roof edge and wall while changing the view toward a side facade.", "intent": "Position construction geometry on the building exterior.", "app": "SketchUp 2026", "details": "A guide line and length readout were visible near the roof and upper wall."}, {"start_s": 25514.498, "end_s": 25524.415, "action": "Continued orbiting and zooming around the roof, clicked near the roof edge, and positioned another guide across the roof surface while returning to a wider exterior view.", "intent": "Lay out or inspect roof construction guides.", "app": "SketchUp 2026", "details": "The final view showed the roof, two balconies, and a guide crossing the roof."}, {"start_s": 25524.415, "end_s": 25535.05, "action": "Scrolled and orbited around the roof and facade, clicked near roof geometry, and made a brief drag selection or adjustment before continuing to reposition the camera.", "intent": "Refine or inspect the roof guide geometry.", "app": "SketchUp 2026", "details": "The model remained in a close roof-edge view with construction guides visible."}, {"start_s": 25535.05, "end_s": 25545.631, "action": "Scrolled and entered a short text or keyboard input, clicked near the roof edge, and continued adjusting the rectangular drawing with scrolling and a changed camera angle.", "intent": "Continue drawing or sizing a roof element.", "app": "SketchUp 2026", "details": "The active rectangular tool showed dimension readouts while guides remained visible on the roof."}, {"start_s": 25545.631, "end_s": 25555.616, "action": "Adjusted the SketchUp camera with scrolling and middle-click navigation, then clicked around the roof-edge geometry to select multiple entities.", "intent": "Inspect and select roof-edge geometry in the 3D model.", "app": "SketchUp 2026", "details": "The view remained focused on the building facade, roof edge, window, and balcony."}, {"start_s": 25555.616, "end_s": 25565.546, "action": "Selected the roof-edge face, used push/pull-style interactions and navigation, then switched to the paint tool and changed the visible model view toward the doorway and window.", "intent": "Edit or apply a material to the selected roof-area geometry.", "app": "SketchUp 2026", "details": "The Materials tray showed the M09_Shadow_Night material and color swatches."}, {"start_s": 25565.546, "end_s": 25575.154, "action": "Closed or hid the right-side tray, orbited and zoomed around the building facade, and clicked the long upper face and nearby geometry while inspecting the model.", "intent": "Review the facade and roof geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The camera moved from a close facade view to a wider view showing both balconies, doors, windows, and the roof."}, {"start_s": 25575.154, "end_s": 25584.903, "action": "Orbited and zoomed around the building, selected the long upper edge or face, and began drawing or editing a rectangular roof-edge element with the line/rectangle tool.", "intent": "Create or modify roof-edge geometry across the facade.", "app": "SketchUp 2026", "details": "A selected rectangular outline appeared along the roof edge, with a dimension readout visible near the bottom."}, {"start_s": 25584.903, "end_s": 25594.664, "action": "Continued orbiting and zooming around the roof and facade, selected the long roof-edge element, and inspected the resulting geometry from a wider front view.", "intent": "Verify the roof-edge edit from multiple viewpoints.", "app": "SketchUp 2026", "details": "The model view ended on the front facade with both balconies and the long upper roof detail visible."}, {"start_s": 25594.664, "end_s": 25604.941, "action": "Navigated closer to the upper wall and roof edge, clicked along the long edge and adjacent faces, and continued inspecting the geometry with repeated scrolling.", "intent": "Refine or inspect the roof-edge and upper-wall geometry.", "app": "SketchUp 2026", "details": "The final view showed the long roof-edge strip, upper wall, window, and selected blue edge line."}, {"start_s": 25604.941, "end_s": 25614.922, "action": "Orbited and adjusted the SketchUp camera around the building model, using middle-button navigation and scrolling to move from an underside close-up toward the roof and wall junction.", "intent": "Inspect the model geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 25614.922, "end_s": 25625.347, "action": "Selected a face and activated Push/Pull, entered a partial distance value, and dragged the face to modify the building geometry while scrolling and repositioning the view.", "intent": "Adjust the thickness or position of a selected building face.", "app": "SketchUp 2026", "details": "Push/Pull remained active; the visible distance changed from approximately 2 3/4 inches to 6 inches."}, {"start_s": 25625.347, "end_s": 25635.004, "action": "Navigated closer around the roof corner, selected a face, and used Push/Pull to alter the corner surface, ending with the face highlighted and a near-zero distance preview.", "intent": "Refine the roof or wall corner geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active on the selected gray corner face."}, {"start_s": 25635.004, "end_s": 25645.091, "action": "Continued navigating and editing with Push/Pull, then zoomed and orbited out to review the front elevation of the building, including the two balconies and central wall.", "intent": "Review the edited geometry from a wider exterior view.", "app": "SketchUp 2026", "details": "The final view showed the building front with a large selected or active roof-area bounding region."}, {"start_s": 25645.091, "end_s": 25656.249, "action": "Orbited and zoomed around the upper exterior, opened the Edit menu, and highlighted Purge Unused Assets while viewing the roof and facade.", "intent": "Inspect model cleanup options and prepare to purge unused assets.", "app": "SketchUp 2026", "details": "The Edit menu was open with Purge Unused Assets highlighted."}, {"start_s": 25656.249, "end_s": 25665.799, "action": "Closed the menu and continued orbiting and zooming to inspect the building from above and then from a clearer front-facing angle, showing the roof, central facade, doors, windows, and balconies.", "intent": "Review the overall model after editing and navigation.", "app": "SketchUp 2026", "details": null}, {"start_s": 25665.799, "end_s": 25676.845, "action": "Orbited and zoomed around the SketchUp building model, moving from a close view of the facade to a wider view showing both building sections.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 25676.845, "end_s": 25686.988, "action": "Zoomed and orbited toward the front facade, progressively focusing on the left entrance, door, window, and balcony railing.", "intent": "Examine the front exterior details.", "app": "SketchUp", "details": null}, {"start_s": 25686.988, "end_s": 25696.525, "action": "Selected the Push/Pull tool and interacted with the building facade near the entrance, then adjusted the view around the roof edge and front wall.", "intent": "Modify or inspect facade geometry using Push/Pull.", "app": "SketchUp", "details": "The Push/Pull tool was active and the model became translucent during the interaction."}, {"start_s": 25696.525, "end_s": 25707.163, "action": "Zoomed and orbited across the front facade, interacted near the roof and wall edges, typed brief input, and activated the Tape Measure tool to place a guide showing a 5-inch length.", "intent": "Measure and inspect the facade geometry.", "app": "SketchUp", "details": "A guide was visible near the right entrance, with the Length field showing 5 inches."}, {"start_s": 25707.163, "end_s": 25717.424, "action": "Orbited and zoomed out to frame the full front elevation with both doors, windows, balconies, and roof, while placing or adjusting guide lines near the roof edge.", "intent": "Review the overall facade and reference measurements.", "app": "SketchUp", "details": "Guides remained visible across the model."}, {"start_s": 25717.424, "end_s": 25727.406, "action": "Zoomed and orbited toward the right balcony and entrance, then placed or adjusted a guide at the balcony edge while inspecting the railing and door area.", "intent": "Measure and inspect the right-side balcony details.", "app": "SketchUp", "details": "The view ended in a close-up of the right balcony railing with the guide tool active and the Length field showing 5 inches."}, {"start_s": 25727.406, "end_s": 25737.204, "action": "Orbited and zoomed around the SketchUp house model, moving from a close-up of the balcony and wall to a wider exterior view.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 25737.204, "end_s": 25746.067, "action": "Continued orbiting and zooming around the house exterior, then activated the Tape Measure tool and placed or adjusted a measurement guide near the roof edge.", "intent": "Inspect the roof area and take an approximate model measurement.", "app": "SketchUp", "details": "The Tape Measure tool was active and displayed a length of about 11 1/16 inches."}, {"start_s": 25746.067, "end_s": 25756.2, "action": "Orbited and zoomed to reframe the front facade, showing both doors, windows, balconies, and the roof; continued navigating the model view.", "intent": "Review the front exterior composition.", "app": "SketchUp", "details": null}, {"start_s": 25756.2, "end_s": 25766.466, "action": "Zoomed toward the right side of the facade and used the Tape Measure tool along the roof edge, placing or adjusting guide points while the view became a close-up.", "intent": "Measure or align the roof edge and adjacent facade.", "app": "SketchUp", "details": "The measurement display showed approximately 11 3/8 inches and later 11 3/16 inches."}, {"start_s": 25766.466, "end_s": 25776.777, "action": "Continued manipulating the view and measurement guide around the roof corner, then orbited to a slightly wider view of the roof and upper facade.", "intent": "Inspect and refine the roof-edge measurement.", "app": "SketchUp", "details": "The Tape Measure tool remained active; the displayed length reached 0 inches during guide placement."}, {"start_s": 25776.777, "end_s": 25786.705, "action": "Adjusted the measurement guide near the roof edge, then orbited and zoomed out to reveal most of the house roof and front facade.", "intent": "Finish the roof inspection and review the overall model.", "app": "SketchUp", "details": "The span ended with a wider elevated view of the house and the Tape Measure tool still selected."}, {"start_s": 25786.705, "end_s": 25796.11, "action": "Navigated around the SketchUp house model with clicks, middle-button orbiting, and scrolling, changing from a close balcony view to a wider exterior view.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "The Guide tool remained active, with guide markers visible near the balcony."}, {"start_s": 25796.11, "end_s": 25805.757, "action": "Adjusted the camera around the front facade using clicks, orbiting, scrolling, and a brief drag; entered distance values while positioning a guide near the balcony edge.", "intent": "Inspect and position a construction guide on the exterior model.", "app": "SketchUp 2026", "details": "The Length field visibly showed 7' and later approximately 7 3/16\"."}, {"start_s": 25805.757, "end_s": 25816.023, "action": "Dragged and orbited around the balcony, then continued scrolling and clicking to inspect the railing and facade from multiple angles; briefly entered undo-like keystrokes.", "intent": "Review the balcony geometry and adjust the view.", "app": "SketchUp 2026", "details": "The view ended at a high, tilted perspective of the building with guide lines visible."}, {"start_s": 25816.023, "end_s": 25826.192, "action": "Continued orbiting and scrolling around the roof and facade, clicked the upper-left toolbar area and model edges, and positioned another guide near the balcony corner; entered a short distance value.", "intent": "Inspect the roof and exterior edges while placing or measuring guides.", "app": "SketchUp 2026", "details": "The Length field visibly showed 4\" near the end of the span."}, {"start_s": 25826.192, "end_s": 25836.163, "action": "Clicked and dragged around the roof and balcony, orbited through wider exterior views, and selected points near the right balcony railing while continuing guide placement.", "intent": "Inspect and measure the opposite balcony and roof edge.", "app": "SketchUp 2026", "details": "The Length field later displayed approximately 8 3/8\"."}, {"start_s": 25836.163, "end_s": 25846.394, "action": "Orbited and scrolled across the roof and front facade, clicking several points along the roof edge and positioning a guide line across the roof plane.", "intent": "Inspect roof alignment and place a reference guide.", "app": "SketchUp 2026", "details": "The Length field visibly reached approximately 11 1/16\"; guide lines remained visible across the model."}, {"start_s": 25846.394, "end_s": 25856.432, "action": "Adjusted the view with repeated scrolls and clicks, then placed or repositioned a guide on the model; typed brief spacing and tool-toggle keystrokes while confirming the guide location.", "intent": "Position a construction guide on the SketchUp model.", "app": "SketchUp 2026", "details": "Guide-placement mode remained active, with the length field showing changing values."}, {"start_s": 25856.432, "end_s": 25866.276, "action": "Continued placing and adjusting the guide through clicks, brief drags, scrolls, and typed constraints; selected or confirmed a point near the sloped model surface.", "intent": "Refine the guide position and constraint on the model.", "app": "SketchUp 2026", "details": "The guide and inference markers remained visible across the roof area."}, {"start_s": 25866.276, "end_s": 25876.543, "action": "Exited the close guide view, navigated to an exterior building view, then selected the rectangle tool and began setting its first corner on the model.", "intent": "Start drawing a rectangular element on the building model.", "app": "SketchUp 2026", "details": "The building fa\u00e7ade with doors, windows, balconies, and roof was visible before the rectangle tool became active."}, {"start_s": 25876.543, "end_s": 25886.132, "action": "Orbit-navigated around the roof edge with middle-mouse clicks and scrolls while continuing the rectangle operation; adjusted the opposite corner and displayed changing dimensions.", "intent": "Define the rectangle along the roof plane.", "app": "SketchUp 2026", "details": "The rectangle tool status indicated setting the opposite corner or entering length and width."}, {"start_s": 25886.132, "end_s": 25894.354, "action": "Entered additional rectangle input and orbited the view around the roof edge, leaving the rectangle operation constrained on a plane-intersect line.", "intent": "Constrain and size the roof-plane rectangle.", "app": "SketchUp 2026", "details": "A tooltip reported \u201cConstrained on Plane Intersect Line,\u201d with dimensions shown in the status area."}, {"start_s": 25894.354, "end_s": 25904.987, "action": "Scrolled and orbited around the roof, then completed or confirmed a large rectangular outline on the roof surface; left the selected blue rectangle visible while changing the viewing angle.", "intent": "Finalize the rectangular roof element and inspect it from another angle.", "app": "SketchUp 2026", "details": "The final view showed a blue rectangular outline on the roof and orbit mode active."}, {"start_s": 25904.987, "end_s": 25914.865, "action": "Scrolled around the roof-edge geometry, clicked near the model edge, and returned to the Select tool, leaving the visible face and roof components unselected.", "intent": "Inspect and select roof-edge geometry.", "app": "SketchUp", "details": null}, {"start_s": 25914.865, "end_s": 25924.513, "action": "Scrolled and orbited around the building\u2019s roof and upper wall edge, clicking several points to inspect the long narrow roof-edge surface; left a roof-edge line highlighted.", "intent": "Review roof-edge geometry from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 25924.513, "end_s": 25943.013, "action": "Continued navigating around the building with scrolls and middle-button orbiting, clicked and dragged on the roof area, and activated a push/pull-style operation showing an \u201cOffset limited to 6\u201d message with a 6-inch distance.", "intent": "Modify or test the roof-edge surface geometry.", "app": "SketchUp", "details": "The span ended with a switch back to the SketchUp application."}, {"start_s": 25943.013, "end_s": 25953.158, "action": "Returned to SketchUp, orbited and zoomed out from the roof edge to a wider front view of the building, while the push/pull operation continued to display the 6-inch limit before further inspection clicks.", "intent": "Review the roof modification in the context of the building facade.", "app": "SketchUp", "details": "The visible model expanded from a close-up roof edge to a front elevation with balconies, doors, and windows."}, {"start_s": 25953.158, "end_s": 25963.027, "action": "Scrolled and orbited to wider exterior views, moving from the front facade to an overall view of the building and a neighboring structure; clicked and dragged near the roof and briefly used keyboard input while inspecting the result.", "intent": "Inspect the overall exterior model after the roof operation.", "app": "SketchUp", "details": null}, {"start_s": 25963.027, "end_s": 25972.604, "action": "Clicked and scrolled around the front elevation, then used the active push/pull tool on the roof edge and navigated outward to an overall view showing both modeled structures.", "intent": "Continue checking the roof geometry and final model context.", "app": "SketchUp", "details": "The final view showed the main building and adjacent structure at a distance."}, {"start_s": 25972.604, "end_s": 25982.925, "action": "Orbited and zoomed around the SketchUp house model, then opened the View menu to inspect display options.", "intent": "Inspect the model from different angles and access visibility controls.", "app": "SketchUp 2026", "details": "The View menu was open at the end with items including Hidden Geometry, Hidden Objects, Guides, and Axes."}, {"start_s": 25982.925, "end_s": 25992.442, "action": "Adjusted the camera around the house exterior with orbit and zoom gestures, bringing the front wall, doors, windows, balconies, and roof into view.", "intent": "Review the exterior model from a more centered perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 25992.442, "end_s": 26002.387, "action": "Continued orbiting and zooming toward the roof and upper wall, ending on a very close view of a roof-edge corner and adjacent wall surfaces.", "intent": "Examine geometry at the roof and wall junction.", "app": "SketchUp 2026", "details": "The camera moved from a broad facade view to a close-up of the roof corner."}, {"start_s": 26002.387, "end_s": 26011.592, "action": "Rotated and zoomed back across the roof and facade, then selected the Tape Measure tool and positioned it near the balcony edge.", "intent": "Inspect the model and prepare a measurement or guide operation.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active at the end, with its measurement field visible."}, {"start_s": 26011.592, "end_s": 26020.637, "action": "Orbited and zoomed along the roofline and upper facade, repeatedly clicking near the roof-edge geometry while keeping the close-up view focused on the corner.", "intent": "Examine or position geometry at the roof edge.", "app": "SketchUp 2026", "details": "The view remained tightly framed on roof and wall surfaces."}, {"start_s": 26020.637, "end_s": 26030.21, "action": "Orbited and zoomed outward around the house, moving from the roof corner to a wider exterior view and then underneath the building, with guide or axis lines visible.", "intent": "Review the model from additional exterior and underside viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the facade, balconies, underside, and colored guide/axis lines against the sky."}, {"start_s": 26030.21, "end_s": 26040.174, "action": "Orbited and zoomed around the SketchUp building model, moving from a wider view to a close exterior view of the roof, doors, windows, and balconies.", "intent": "Inspect the building exterior from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 26040.174, "end_s": 26050.116, "action": "Continued orbiting and zooming around the building, then pulled back to show the full side elevation and surrounding model area.", "intent": "Review the building\u2019s overall exterior form.", "app": "SketchUp 2026", "details": null}, {"start_s": 26050.116, "end_s": 26059.94, "action": "Rotated and zoomed across the building\u2019s side and rear elevations, ending on a closer view of an exterior wall with a window, wooden door, and balcony.", "intent": "Inspect exterior walls and repeated balcony and door elements.", "app": "SketchUp 2026", "details": null}, {"start_s": 26059.94, "end_s": 26070.172, "action": "Orbited and zoomed out to an elevated overall view, then rotated back toward the front elevation with its two doors, windows, balconies, and central wall vent.", "intent": "Compare the building\u2019s elevations and overall layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 26070.172, "end_s": 26078.974, "action": "Zoomed closely toward the front wall and balcony, typed a character, and switched to the guide tool before clicking near the balcony edge to create or position a guide.", "intent": "Inspect and possibly mark a reference along the balcony geometry.", "app": "SketchUp 2026", "details": "The guide tool status bar showed a 1-foot length while the view was tightly focused on the balcony corner."}, {"start_s": 26078.974, "end_s": 26089.08, "action": "Continued navigating around the close-up exterior geometry, typed a space and a character, then clicked while the Push/Pull tool was active near the roof and window area.", "intent": "Inspect or modify the close-up building geometry.", "app": "SketchUp 2026", "details": "The final view remained tightly zoomed on the roof edge, wall, and window; the exact edit result was not visibly confirmed."}, {"start_s": 26089.08, "end_s": 26099.476, "action": "Clicked and typed briefly, then orbited and zoomed the SketchUp camera around the building facade, balconies, roof, doors, and windows.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 26099.476, "end_s": 26109.367, "action": "Continued orbiting and zooming around the building exterior, then selected the Tape Measure tool and positioned a guide point near the balcony edge.", "intent": "Review the exterior model and begin measuring or placing a guide.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active at the end, with a 1-foot length shown."}, {"start_s": 26109.367, "end_s": 26120.531, "action": "Clicked and navigated around the model with repeated orbit and zoom movements, moving from the balcony and roof corner to a broader front view of the building.", "intent": "Inspect additional exterior geometry and reposition the camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 26120.531, "end_s": 26130.932, "action": "Opened the View menu, reviewed display options including Hidden Geometry and Hidden Objects, then closed the menu and continued orbiting around the building facade.", "intent": "Adjust or review SketchUp viewing and visibility settings while inspecting the model.", "app": "SketchUp 2026", "details": "The View menu visibly listed Hidden Geometry, Hidden Objects, Section Planes, Axes, and Guides."}, {"start_s": 26130.932, "end_s": 26140.861, "action": "Orbited and zoomed around the rear or side facade, moving across the roofline, wall openings, windows, and balcony railing.", "intent": "Inspect the building's exterior from another side.", "app": "SketchUp 2026", "details": null}, {"start_s": 26140.861, "end_s": 26150.484, "action": "Continued orbiting and zooming downward toward the balcony and wall openings, ending on a close underside view of the balcony railing and facade.", "intent": "Examine the balcony structure and adjacent exterior geometry closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 26150.484, "end_s": 26161.309, "action": "Continue drawing and adjusting a line across the model, clicking endpoints and entering length values; leave the Line tool active with a measured segment preview.", "intent": "Create or dimension a structural line in the SketchUp model.", "app": "SketchUp 2026", "details": "The Measurements box shows changing lengths, including 6 inches and approximately 8 feet 5 15/16 inches."}, {"start_s": 26161.309, "end_s": 26171.296, "action": "Select and reposition geometry, then activate Push/Pull and apply it to a central face; scroll to inspect the resulting recessed or extruded section.", "intent": "Modify the depth of a central architectural face.", "app": "SketchUp 2026", "details": "Push/Pull is active at the end, with the distance field showing 2 feet."}, {"start_s": 26171.296, "end_s": 26181.383, "action": "Navigate around the model with zooming and orbiting, then use Push/Pull on balcony or railing geometry before returning to a wider exterior view.", "intent": "Inspect and adjust exterior balcony geometry.", "app": "SketchUp 2026", "details": "The view changes from a close-up balcony edge to a wider facade showing two balcony openings and railings."}, {"start_s": 26181.383, "end_s": 26191.374, "action": "Orbit and zoom around the building facade, inspect the balcony and openings from multiple angles, and apply Push/Pull to an upper edge or face near the roofline.", "intent": "Review and refine facade and roof-edge geometry.", "app": "SketchUp 2026", "details": "The final view is a close-up of the roof edge, facade opening, and nearby vent."}, {"start_s": 26191.374, "end_s": 26201.431, "action": "Zoom out and orbit around the building to review the overall exterior, including the roof, balconies, doors, and adjacent structure.", "intent": "Inspect the completed model from broader exterior viewpoints.", "app": "SketchUp 2026", "details": "The view progresses from a close facade to an elevated overview and then shows both building masses together."}, {"start_s": 26201.431, "end_s": 26210.42, "action": "Orbit and zoom toward another side of the building, inspect doors and windows, and finish on a close exterior view beneath the roofline.", "intent": "Examine exterior openings and facade details from another angle.", "app": "SketchUp 2026", "details": "The final screenshot shows a close-up of a brown door and adjacent glazed opening under the roof."}, {"start_s": 26210.42, "end_s": 26220.6, "action": "Orbit and scroll around the building exterior, clicking near the roof and balcony area while changing the camera view.", "intent": "Inspect the exterior model from different angles.", "app": "SketchUp 2026", "details": "Viewed roof edges, doors, windows, and balcony railings."}, {"start_s": 26220.6, "end_s": 26230.611, "action": "Selected a roof-edge face and used the Push/Pull tool, entering and adjusting a distance while scrolling and repositioning the view.", "intent": "Modify or inspect the roof-edge geometry.", "app": "SketchUp 2026", "details": "The selected roof strip was highlighted and the Push/Pull distance field was visible."}, {"start_s": 26230.611, "end_s": 26240.546, "action": "Scrolled and orbited around the upper exterior, clicked several wall and roof areas, and ended with a broader front view of the doors, windows, and balconies.", "intent": "Review the building facade and roof geometry.", "app": "SketchUp 2026", "details": "Camera moved from a close upper-wall view to a frontal exterior view."}, {"start_s": 26240.546, "end_s": 26250.567, "action": "Orbited and scrolled along the facade, clicking around the doors, windows, and balcony edges to inspect the exterior from multiple angles.", "intent": "Inspect facade and balcony components.", "app": "SketchUp 2026", "details": "Ended on a close view of a wooden door, window, and balcony railing."}, {"start_s": 26250.567, "end_s": 26260.202, "action": "Selected the Line tool and drew or adjusted a short line near the roof above a door and window, entering a visible length value before returning to selection.", "intent": "Add or edit a roof-area line segment.", "app": "SketchUp 2026", "details": "A blue line segment was visible near the roof edge, with a 6-inch length shown during drawing."}, {"start_s": 26260.202, "end_s": 26270.666, "action": "Selected a roof-edge face, used Push/Pull with a distance entry, then scrolled and moved down to the balcony railing area while continuing to adjust the view.", "intent": "Modify or inspect connected roof and balcony geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active; the view ended close to the balcony corner and railing."}, {"start_s": 26270.666, "end_s": 26280.063, "action": "Scrolled and adjusted the close-up view around the roof edge, door, window, and balcony, then continued navigating to a lower balcony area.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "Used middle-click navigation and scrolling; the Push/Pull tool remained active."}, {"start_s": 26280.063, "end_s": 26290.243, "action": "Scrolled and orbited from the close exterior view out to a wider view of the building, then returned to a front-facing view of a door, window, and balcony.", "intent": "Review the building exterior and reposition the camera.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible."}, {"start_s": 26290.243, "end_s": 26300.648, "action": "Orbited and zoomed out progressively to inspect the full building and the adjacent floor-plan structure, then moved back toward the front facade and balconies.", "intent": "Survey the overall model and exterior facade.", "app": "SketchUp 2026", "details": "Used middle-click orbiting and scrolling; no confirmed modeling change."}, {"start_s": 26300.648, "end_s": 26310.32, "action": "Selected the Line tool, clicked near the roof edge, and entered several short keyboard inputs while positioning the view around the roof and wall junction; then switched to the Move tool.", "intent": "Begin or adjust a small line/edge edit on the exterior model.", "app": "SketchUp 2026", "details": "The Line tool showed a 6-inch length during the interval, followed by Move tool activation."}, {"start_s": 26310.32, "end_s": 26320.756, "action": "Dragged and clicked around the roof-edge and balcony geometry, entered a short keyboard input, and used Push/Pull to adjust or inspect the balcony area before navigating to a closer door-and-window view.", "intent": "Modify or inspect exterior facade and balcony geometry.", "app": "SketchUp 2026", "details": "Push/Pull was active at the end, with a displayed distance of approximately 1 foot 5 inches."}, {"start_s": 26320.756, "end_s": 26330.95, "action": "Dragged and clicked on the balcony and adjacent wall, entered brief spacebar inputs, then orbited and zoomed out to a broad view of the complete building and neighboring structure.", "intent": "Continue exterior editing/inspection and review the overall result.", "app": "SketchUp 2026", "details": "The interval ended in Orbit mode with the model shown from a distant elevated angle."}, {"start_s": 26330.95, "end_s": 26341.182, "action": "Orbited and zoomed around the SketchUp building model, moving from a frontal view to a closer elevated view of the doors, windows, roof, and balcony.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 26341.182, "end_s": 26351.786, "action": "Continued orbiting and zooming around the building exterior, focusing on the left-side window, wooden door, roof overhang, and adjacent wall.", "intent": "Review exterior details of the modeled structure.", "app": "SketchUp 2026", "details": null}, {"start_s": 26351.786, "end_s": 26368.359, "action": "Navigated through multiple close and elevated views of the building, including the balcony and interior openings, then zoomed out to show the building and surrounding floor plan.", "intent": "Inspect the model layout and relationship between exterior and interior elements.", "app": "SketchUp 2026", "details": null}, {"start_s": 26368.359, "end_s": 26372.605, "action": "Switched briefly through Windows Explorer and the recorder, then opened SketchUp\u2019s Import dialog in the Downloads folder and selected the listed SketchUp file before returning to the model.", "intent": "Open an import workflow and choose a model file.", "app": "SketchUp 2026", "details": "The Import dialog displayed Downloads and a SketchUp file named \u201caluminum+and+glass+sliding+door\u201d."}, {"start_s": 26372.605, "end_s": 26382.631, "action": "Navigated the model and manipulated a selected rectangular window or door component, moving it across the scene while changing the camera view; the selected component remained visible away from the building.", "intent": "Position the imported or selected window component in the model.", "app": "SketchUp 2026", "details": "The Move tool status and a 5-inch distance field were visible while the component was selected."}, {"start_s": 26382.631, "end_s": 26392.61, "action": "Continued orbiting and zooming around the selected blue-glazed sliding-door assembly, bringing it into a close-up view and inspecting its framed panels and central handle.", "intent": "Review the placement and geometry of the sliding-door assembly.", "app": "SketchUp 2026", "details": null}, {"start_s": 26392.61, "end_s": 26402.196, "action": "Navigated around the SketchUp model with middle-mouse orbiting and scrolling, then selected and manipulated the glazed window assembly until it was shown from a wider angle.", "intent": "Inspect the window assembly and its placement in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 26402.196, "end_s": 26411.338, "action": "Continued orbiting and zooming around the model, moving from a full view of the detached glazed panel to close views of its frames and glass surfaces; entered a single character while interacting near the model.", "intent": "Examine the window geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 26411.338, "end_s": 26422.749, "action": "Orbited and zoomed through the model, then selected the glazed panel and began a copy/move operation, leaving a duplicated panel visible beside the building.", "intent": "Position or duplicate the window assembly on the building.", "app": "SketchUp 2026", "details": null}, {"start_s": 26422.749, "end_s": 26432.796, "action": "Continued navigating around the selected panel and adjusted its placement and scale with SketchUp transform controls; entered a character while the transformed panel remained selected on the facade.", "intent": "Fit the window assembly to the facade opening.", "app": "SketchUp 2026", "details": null}, {"start_s": 26432.796, "end_s": 26442.571, "action": "Used scale grips and orbiting to resize and inspect the selected window assembly, including dragging its right-side control and zooming to a close-up of the frame and glass.", "intent": "Refine the window assembly dimensions and alignment.", "app": "SketchUp 2026", "details": null}, {"start_s": 26442.571, "end_s": 26452.742, "action": "Continued scaling the selected window assembly while orbiting and zooming out; finished with the panel visible on the building facade and scale grips still active.", "intent": "Finalize the window assembly scale and placement.", "app": "SketchUp 2026", "details": null}, {"start_s": 26452.742, "end_s": 26462.827, "action": "Navigated around the SketchUp model with repeated view adjustments and selected the blue-framed window assembly; left the view zoomed in on the window.", "intent": "Inspect and position the window assembly for editing.", "app": "SketchUp 2026", "details": "The window assembly was visibly selected at points, with scale/edit handles appearing before the view changed."}, {"start_s": 26462.827, "end_s": 26471.681, "action": "Adjusted the camera around the selected window, zooming in on its center and then out to show the window on the building facade.", "intent": "Review the window assembly in context and refine the view.", "app": "SketchUp 2026", "details": "The model view progressed from a close-up of the glazing and center frame to a wider exterior facade view."}, {"start_s": 26471.681, "end_s": 26481.821, "action": "Selected the window assembly and engaged the Scale tool, then adjusted the view while keeping the assembly selected.", "intent": "Scale or prepare to scale the window assembly.", "app": "SketchUp 2026", "details": "Blue selection outlines and scale handles were visible; the status bar indicated the Scale tool and a red scale value of 1.40."}, {"start_s": 26481.821, "end_s": 26491.934, "action": "Continued manipulating the selected window with the Scale tool, changing the camera angle and zoom while repositioning the selection.", "intent": "Refine the window assembly\u2019s scale or placement.", "app": "SketchUp 2026", "details": "The window remained outlined in blue and the Scale tool was active during the view adjustments."}, {"start_s": 26491.934, "end_s": 26502.134, "action": "Adjusted the selected window\u2019s scale using the visible handles and zoomed out to inspect the result on the facade.", "intent": "Resize the window assembly and verify its overall appearance.", "app": "SketchUp 2026", "details": "Green scale handles surrounded the selected assembly, and the displayed red scale value reached 1.67 before the wider inspection view."}, {"start_s": 26502.134, "end_s": 26511.774, "action": "Exited the close editing view by zooming out to inspect the facade, then zoomed back toward the window and continued selecting or adjusting it.", "intent": "Review the resized window in context and continue model editing.", "app": "SketchUp 2026", "details": "The final views alternated between a wide facade view and a close-up of the blue-outlined window assembly."}, {"start_s": 26511.774, "end_s": 26522.535, "action": "Clicked and orbited around the glazed window assembly, then adjusted the view with repeated scrolling; left the window components selected.", "intent": "Inspect and navigate the 3D window model.", "app": "SketchUp 2026", "details": null}, {"start_s": 26522.535, "end_s": 26532.168, "action": "Orbited and zoomed around the window, selected the assembly, and activated the Scale tool; the full window frame became highlighted with a yellow outline and a scale value was shown.", "intent": "Prepare the window assembly for scaling.", "app": "SketchUp 2026", "details": "The visible Scale tool state showed Red Scale 1.19."}, {"start_s": 26532.168, "end_s": 26541.731, "action": "Zoomed out to the balcony facade, selected the window, and dragged it with the Move tool; the view ended with the window positioned on the wall and a distance readout visible.", "intent": "Reposition the window assembly on the facade.", "app": "SketchUp 2026", "details": "The Move tool status showed a distance of approximately 3 3/16 inches."}, {"start_s": 26541.731, "end_s": 26551.819, "action": "Zoomed and orbited to the upper-right corner of the selected window, then engaged a move grip and adjusted the corner while scrolling for a closer view.", "intent": "Fine-tune the selected window geometry at its upper corner.", "app": "SketchUp 2026", "details": "The view showed the Move tool with a corner grip and changing distance readouts."}, {"start_s": 26551.819, "end_s": 26561.577, "action": "Scrolled around the window and balcony, clicked the selected assembly, and manipulated it with the Move/Copy controls; the window remained outlined in blue as the view shifted downward.", "intent": "Continue adjusting or copying the window assembly.", "app": "SketchUp 2026", "details": "The final view showed the selected window with a move/copy grip near its lower-right corner."}, {"start_s": 26561.577, "end_s": 26571.916, "action": "Orbited and zoomed tightly around the lower edge of the selected window and balcony railing, then engaged a move grip and adjusted the lower-right portion.", "intent": "Fine-tune the window assembly's lower alignment.", "app": "SketchUp 2026", "details": "The final view showed active Move-tool grips and a distance readout near the lower-right window corner."}, {"start_s": 26571.916, "end_s": 26582.108, "action": "Orbit and zoom around the SketchUp building model, moving from a close fa\u00e7ade view to a wider view showing the building and adjacent floor-plan structure.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 26582.108, "end_s": 26591.858, "action": "Continue orbiting and zooming around the model, bringing the front fa\u00e7ade and its doors, windows, and roof into progressively closer views.", "intent": "Review exterior fa\u00e7ade details.", "app": "SketchUp 2026", "details": null}, {"start_s": 26591.858, "end_s": 26601.166, "action": "Orbit and zoom across the building exterior, alternating between an overall view and close views of the roofline and wall vent.", "intent": "Inspect exterior geometry and details.", "app": "SketchUp 2026", "details": null}, {"start_s": 26601.166, "end_s": 26611.689, "action": "Navigate around the exterior with repeated orbit and zoom motions, shifting from the roof and fa\u00e7ade close-up to a wider view that includes the neighboring structure.", "intent": "Examine the building from additional exterior angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 26611.689, "end_s": 26621.873, "action": "Orbit and zoom toward the side fa\u00e7ade and roof edge, then click repeatedly near the upper model area while keeping the view focused on the building exterior.", "intent": "Inspect and interact with the roof-edge area.", "app": "SketchUp 2026", "details": null}, {"start_s": 26621.873, "end_s": 26632.452, "action": "Select the roof-edge geometry, drag it, and enter a distance value while using the move/copy tool; leave the edge highlighted in the close-up view.", "intent": "Modify or copy the selected roof-edge element.", "app": "SketchUp 2026", "details": "The distance field visibly shows approximately 1 1/8 inches."}, {"start_s": 26632.452, "end_s": 26641.963, "action": "Entered a distance value of 4 and confirmed it, then navigated around the roof and wall geometry with repeated middle-button clicks and scrolling.", "intent": "Adjust or inspect the selected model geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The Move tool remained active and the view shifted to a close-up of the roof edge."}, {"start_s": 26641.963, "end_s": 26652.014, "action": "Pressed Space and clicked near the model edge, then scrolled and clicked repeatedly while changing the view around the roof and wall intersection.", "intent": "Inspect the model and reposition the camera around the exterior geometry.", "app": "SketchUp 2026", "details": "The Select tool was visible by the end of the span."}, {"start_s": 26652.014, "end_s": 26662.496, "action": "Clicked and typed a short command, scrolled through the view, then dragged near the model edge; the camera ended on a wider front view of the building.", "intent": "Select or manipulate roof-edge geometry while reviewing the building facade.", "app": "SketchUp 2026", "details": "A roof-edge point was selected and the Move tool showed a distance of about 11/16 inches."}, {"start_s": 26662.496, "end_s": 26672.779, "action": "Orbited and scrolled around the building facade and roof, clicking several points to inspect the overhang, columns, and wall surfaces.", "intent": "Review the exterior model geometry from multiple angles.", "app": "SketchUp 2026", "details": "The view moved from the front facade to a close-up of the roof underside and corner."}, {"start_s": 26672.779, "end_s": 26683.52, "action": "Selected roof and facade geometry, navigated with orbit and zoom motions, and dragged near the roof edge before typing p.", "intent": "Inspect and possibly prepare to modify the roof overhang geometry.", "app": "SketchUp 2026", "details": "Roof-edge geometry was highlighted in blue during part of the span."}, {"start_s": 26683.52, "end_s": 26692.973, "action": "Clicked and navigated around the upper building, then used the Push/Pull tool on a roof or wall face while adjusting the view with repeated scrolling and middle-button clicks.", "intent": "Modify or inspect the upper exterior face and roof overhang.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active, with a distance shown changing from about 7 7/16 inches to 5 3/4 inches."}, {"start_s": 26692.973, "end_s": 26703.014, "action": "Typed a short input, then orbited and zoomed around the building model, moving the view from the front facade toward an upper corner and opening.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": "Used middle-button navigation and scrolling; the view ended close to an upper exterior opening."}, {"start_s": 26703.014, "end_s": 26712.224, "action": "Continued orbiting and zooming around the upper opening, clicked model geometry, and activated a move/copy operation with a typed distance character.", "intent": "Position or modify geometry near the upper opening.", "app": "SketchUp 2026", "details": "The move tool was active at the end, with a distance readout visible."}, {"start_s": 26712.224, "end_s": 26721.712, "action": "Selected and manipulated faces near the roof edge, switched to Push/Pull, and interacted with a small upper face while orbiting to a wider exterior view.", "intent": "Adjust or inspect the upper roof-edge geometry.", "app": "SketchUp 2026", "details": "A face was visibly selected for Push/Pull, and the final view showed the roof corner from outside."}, {"start_s": 26721.712, "end_s": 26731.588, "action": "Orbited and zoomed around the building perimeter, then selected an exterior edge or face and began another geometry interaction after typing a short input.", "intent": "Inspect and potentially edit the exterior corner geometry.", "app": "SketchUp 2026", "details": "The view moved from an underside corner to a side wall and recessed area."}, {"start_s": 26731.588, "end_s": 26741.816, "action": "Navigated around the roof and side facade with repeated orbiting and zooming, selected geometry, and initiated a copy operation near the roof overhang.", "intent": "Inspect and position copied model geometry near the roof edge.", "app": "SketchUp 2026", "details": "The copy tool was active at the end with preselected items and a distance readout."}, {"start_s": 26741.816, "end_s": 26751.693, "action": "Continued orbiting and zooming around the copied roof-edge geometry, typed a character, drew or selected a small circular element near the corner, and ended on a side view of the building.", "intent": "Inspect and work on geometry around the roof corner and side facade.", "app": "SketchUp 2026", "details": "The Circle tool was active briefly, followed by continued orbit navigation."}, {"start_s": 26751.693, "end_s": 26761.371, "action": "Activated the Tape Measure tool, navigated around the model, and entered a 6-inch measurement, leaving a visible 4-inch guide label in the SketchUp view.", "intent": "Create or adjust a measured guide in the model.", "app": "SketchUp 2026", "details": "The view changed while the measurement field was active."}, {"start_s": 26761.371, "end_s": 26771.748, "action": "Navigated and selected geometry, then activated Move and positioned a selected element using a distance of approximately 3 7/16 inches.", "intent": "Move or duplicate a model element by a measured offset.", "app": "SketchUp 2026", "details": "The Move tool and distance field were visible at the end."}, {"start_s": 26771.748, "end_s": 26782.217, "action": "Selected and manipulated model geometry, activated Push/Pull, and orbited around the building to inspect the resulting exterior surfaces.", "intent": "Modify a building surface and inspect the model from different angles.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active while the view changed to show the facade and balconies."}, {"start_s": 26782.217, "end_s": 26792.546, "action": "Orbited and zoomed around the building exterior, then selected and dragged model geometry near the roof and facade.", "intent": "Inspect and adjust exterior building geometry.", "app": "SketchUp 2026", "details": "The view moved from a close roof-edge perspective to a wider facade view."}, {"start_s": 26792.546, "end_s": 26802.445, "action": "Continued orbiting and zooming around the facade, selecting geometry near the roof overhang and window area for inspection or adjustment.", "intent": "Review and refine the exterior model geometry.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the facade with windows, a wood-toned panel, and roof trim."}, {"start_s": 26802.445, "end_s": 26812.364, "action": "Activated the Tape Measure tool, navigated around the model, and inspected the roof and wall geometry while the area readout showed approximately 148.3 square feet.", "intent": "Measure or inspect dimensions of the modeled building surfaces.", "app": "SketchUp 2026", "details": "The view ended on an elevated side perspective with the measurement tool active."}, {"start_s": 26812.364, "end_s": 26822.723, "action": "Orbited and zoomed around the SketchUp building model, clicking and scrolling through close-up exterior surfaces and edges.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 26822.723, "end_s": 26832.829, "action": "Continued orbiting and zooming around a roof and wall junction, switched to the Select tool, and clicked model geometry while typing brief keys.", "intent": "Inspect and possibly select building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 26832.829, "end_s": 26842.59, "action": "Selected and manipulated visible geometry, typed brief keys, zoomed or scrolled, and moved the camera around the roof-edge area.", "intent": "Adjust or inspect the selected model elements.", "app": "SketchUp 2026", "details": null}, {"start_s": 26842.59, "end_s": 26852.693, "action": "Zoomed far out to view multiple building sections, clicked and dragged on the model, then orbited and zoomed into a mostly blank or clipped view.", "intent": "Review the overall model and reposition the camera.", "app": "SketchUp 2026", "details": null}, {"start_s": 26852.693, "end_s": 26863.151, "action": "Dragged and orbited through the scene, zooming between two building components and then into an exterior wall with a window.", "intent": "Navigate the 3D model to inspect different building areas.", "app": "SketchUp 2026", "details": null}, {"start_s": 26863.151, "end_s": 26872.191, "action": "Orbited and zoomed through close-up interior and exterior surfaces, clicked model edges, and ended with a selected vertical edge visible in the building geometry.", "intent": "Inspect and select geometry in a tight model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 26872.191, "end_s": 26882.663, "action": "Entered 6 inches in the distance field and confirmed it, then adjusted the close-up view with scrolling, middle-button navigation, and a selection drag before undoing once.", "intent": "Modify or inspect the model geometry at a specified distance.", "app": "SketchUp 2026", "details": "The distance field visibly showed 6 inches during the interaction."}, {"start_s": 26882.663, "end_s": 26892.059, "action": "Selected the dark tapered face, made additional clicks and drags around its edges, and navigated the view while entering brief text input.", "intent": "Select and inspect a model face or edge in the close-up area.", "app": "SketchUp 2026", "details": "The tapered face was highlighted blue in the first screenshot and unhighlighted after further interaction."}, {"start_s": 26892.059, "end_s": 26902.237, "action": "Entered 6 inches and confirmed it, then selected the model area and activated the Push/Pull tool, producing a large white extruded face with the distance field showing approximately 8 7/8 inches.", "intent": "Push or pull a selected face to modify the building geometry.", "app": "SketchUp 2026", "details": "The final view showed the Push/Pull cursor on the large white face."}, {"start_s": 26902.237, "end_s": 26911.783, "action": "Navigated from the close-up to a wide exterior view using scrolling, middle-button orbiting, and dragging; ended with a front perspective of two small building structures and their roofs, doors, windows, and balconies.", "intent": "Review the overall 3D model from an exterior perspective.", "app": "SketchUp 2026", "details": "The view changed from a close-up wall to a broad building overview and then a closer front facade."}, {"start_s": 26911.783, "end_s": 26921.699, "action": "Orbited and zoomed around the front exterior, changing from a centered two-unit view to a smaller, more distant front perspective while inspecting the roof, facade, doors, windows, and balconies.", "intent": "Inspect the exterior model from different camera angles and distances.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; activity primarily changed the camera view."}, {"start_s": 26921.699, "end_s": 26931.257, "action": "Selected and dragged around the right-side facade, then orbited and zoomed the camera around the building, ending at a close side view showing the wall, roof edge, window, and balcony.", "intent": "Examine the building\u2019s right exterior and side geometry.", "app": "SketchUp 2026", "details": "The final screenshot showed a close side perspective with the roof overhang and balcony."}, {"start_s": 26931.257, "end_s": 26940.833, "action": "Orbited and zoomed around the building exterior, moving the camera from the doorway and balcony toward the roof overhang and window.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 26940.833, "end_s": 26955.195, "action": "Continued orbiting around the roof edge, clicked faces, entered brief keyboard inputs, and activated the Push/Pull tool on the roof overhang.", "intent": "Modify or inspect the roof geometry.", "app": "SketchUp", "details": "The roof underside became stippled while the Push/Pull tool was active."}, {"start_s": 26955.195, "end_s": 26964.525, "action": "Restored and resized the SketchUp window, adjusted the view near the roof overhang, then opened the Default Tray and switched to the Paint Bucket tool.", "intent": "Prepare to apply or inspect a material on the model.", "app": "SketchUp", "details": "The Default Tray displayed Materials with the material name M09_Shadow_Night."}, {"start_s": 26964.525, "end_s": 26982.965, "action": "Clicked and dragged around the roof and wall geometry while entering short keyboard inputs, navigated the view, and resized the SketchUp window again.", "intent": "Continue editing and positioning the exterior model.", "app": "SketchUp", "details": "The view remained tightly focused on the roof edge and overhang."}, {"start_s": 26982.965, "end_s": 26992.843, "action": "Switched between the SketchUp window and Default Tray, hid the tray, navigated the close-up view, and clicked the roof and wall faces with the active Push/Pull tool.", "intent": "Continue editing the roof overhang geometry.", "app": "SketchUp", "details": "The model stayed in a close-up of the roof junction and overhang."}, {"start_s": 26992.843, "end_s": 27002.853, "action": "Clicked and orbited around the roof junction, selected faces, entered a brief keyboard input, and dragged geometry with the Move tool, leaving a highlighted edge and distance readout.", "intent": "Adjust the position of exterior geometry at the roof junction.", "app": "SketchUp", "details": "The final view showed an active move operation with a distance of approximately 1 3/16 inches."}, {"start_s": 27002.853, "end_s": 27013.273, "action": "Orbit and zoom around the roof junction, clicking and dragging over the adjoining faces while adjusting the view.", "intent": "Inspect and position the model around the roof connection.", "app": "SketchUp 2026", "details": "The view shifted from a close-up of the blue and gray roof surfaces to another close-up angle."}, {"start_s": 27013.273, "end_s": 27023.487, "action": "Orbit around the building corner and zoom out, then activate an orbit-related control and reposition the camera to show more of the roof and facade.", "intent": "Examine the roof edge and surrounding building geometry from a wider angle.", "app": "SketchUp 2026", "details": "The final view showed the roofline, exterior wall, window, and door area."}, {"start_s": 27023.487, "end_s": 27033.475, "action": "Select the Line tool, draw or adjust a short line along the roof junction, and orbit/zoom around the resulting geometry.", "intent": "Create or inspect an edge at the roof connection.", "app": "SketchUp 2026", "details": "A temporary line with endpoints and a dimension readout appeared, then the view returned to the roof corner."}, {"start_s": 27033.475, "end_s": 27043.677, "action": "Enter short keyboard inputs while clicking and dragging around the roof corner, then orbit the model to inspect the adjusted edge and adjacent faces.", "intent": "Refine the roof-corner geometry and check its placement.", "app": "SketchUp 2026", "details": "The roof junction remained the focus while the camera moved to a slightly wider exterior view."}, {"start_s": 27043.677, "end_s": 27053.343, "action": "Select the Push/Pull tool, click the small roof-corner face, enter a distance, and push or pull the face to extend the corner geometry; orbit and zoom out to review the result.", "intent": "Modify the depth of the roof-corner face.", "app": "SketchUp 2026", "details": "The small selected face was manipulated, and the final view showed a wider building exterior with the edited roof edge."}, {"start_s": 27053.343, "end_s": 27064.083, "action": "Continue using Push/Pull on the roof-edge face, then orbit and zoom around the building to inspect the extended overhang from multiple angles.", "intent": "Further adjust and verify the roof overhang geometry.", "app": "SketchUp 2026", "details": "The roof projection appeared extended in the wider view before the camera moved to a close side angle."}, {"start_s": 27064.083, "end_s": 27074.439, "action": "Navigated around the SketchUp building model with repeated zooming or scrolling and a brief selection drag, changing from a close-up roof view to a wider front exterior view.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27074.439, "end_s": 27084.079, "action": "Adjusted the camera around the roof and facade, clicked near the upper wall, then activated a guide-related tool and began positioning a guide on the model.", "intent": "Set up or inspect a reference guide near the roof structure.", "app": "SketchUp 2026", "details": "The final view shows a guide point on the roof edge with a 4-inch length readout."}, {"start_s": 27084.079, "end_s": 27094.731, "action": "Continued navigating around the roof and wall geometry, selected a small exterior face, and initiated a move or copy operation on it.", "intent": "Position or duplicate a small architectural element on the exterior.", "app": "SketchUp 2026", "details": "The final view shows the selected face and move/copy inference handles near the roof overhang."}, {"start_s": 27094.731, "end_s": 27104.05, "action": "Entered a 4-inch measurement, orbited the view, and dragged the selected small face or component; then selected a face and applied a push/pull edit, leaving the face highlighted.", "intent": "Modify the dimensions of the selected roof or wall detail.", "app": "SketchUp 2026", "details": "The push/pull status bar shows a distance of approximately 3/4 inch."}, {"start_s": 27104.05, "end_s": 27114.51, "action": "Navigated closer to the edited detail, attempted an offset or face adjustment, and selected nearby geometry while rotating the view around the roof edge.", "intent": "Refine the small exterior detail and inspect the resulting geometry.", "app": "SketchUp 2026", "details": "SketchUp displayed an \u201cOffset limited to ~7 1/16\u201d\u201d warning during the attempted offset."}, {"start_s": 27114.51, "end_s": 27124.711, "action": "Continued orbiting and zooming along the roofline, selected and adjusted the long upper roof or trim geometry, and ended on a wider view of the overhang.", "intent": "Inspect and refine the roof trim or overhang geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 27124.711, "end_s": 27135.788, "action": "Navigated around the SketchUp model with repeated scrolls and middle-button orbiting, then selected or manipulated geometry near the building before changing the view to a close-up.", "intent": "Inspect and position the model for editing.", "app": "SketchUp 2026", "details": "The view moved from an overhead floor-plan-like view to a close-up of exterior geometry."}, {"start_s": 27135.788, "end_s": 27145.409, "action": "Orbited and zoomed around the close-up building geometry, clicked the visible face and edge areas, and entered brief text input while positioning the view.", "intent": "Prepare a specific building element for modification.", "app": "SketchUp 2026", "details": "The model remained focused on a wall or opening beneath the roof slab."}, {"start_s": 27145.409, "end_s": 27155.409, "action": "Selected geometry, entered a distance of 6 inches, and confirmed it, then switched to the Push/Pull tool and began applying the change to the selected face.", "intent": "Modify the building geometry by a specified distance.", "app": "SketchUp 2026", "details": "The SketchUp measurements box visibly showed Distance 6\" and the selected face changed after the operation."}, {"start_s": 27155.409, "end_s": 27164.087, "action": "Completed the geometry adjustment and orbited and zoomed out to review the resulting house model from exterior angles.", "intent": "Review the applied model change in context.", "app": "SketchUp 2026", "details": "The view expanded to show the full front and side portions of the modeled house."}, {"start_s": 27164.087, "end_s": 27173.759, "action": "Orbited and zoomed toward the opposite exterior fa\u00e7ade, inspecting the roof overhang, balcony railings, glazing, and wall details.", "intent": "Inspect exterior fa\u00e7ade details after the edit.", "app": "SketchUp 2026", "details": "The camera moved from a broad house view to a closer fa\u00e7ade view with large blue-tinted windows."}, {"start_s": 27173.759, "end_s": 27183.94, "action": "Selected and manipulated geometry near the roof edge and fa\u00e7ade while zooming closer, then entered a brief move-related input and left the edited edge selected.", "intent": "Make or position another small exterior adjustment.", "app": "SketchUp 2026", "details": "The final view shows the roof overhang and fa\u00e7ade corner with the move tool active and a 2-inch distance displayed."}, {"start_s": 27183.94, "end_s": 27193.169, "action": "Selected and manipulated the roof-edge geometry with repeated clicks, short drags, scrolling, and brief text-key input, changing the close-up view and selection state.", "intent": "Refine or inspect the roof-edge geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 27193.169, "end_s": 27203.077, "action": "Continued selecting roof and fascia edges, scrolling slightly, and dragging at the right roof corner; activated a drawing tool and left a small line/endpoint operation active near the corner.", "intent": "Edit the roof-corner geometry.", "app": "SketchUp 2026", "details": "The drawing tool remained active with a visible endpoint and a 2-inch dimension readout."}, {"start_s": 27203.077, "end_s": 27213.412, "action": "Selected the corner face and used Push/Pull to modify the roof-edge element, then orbited and adjusted the camera to inspect the resulting corner shape.", "intent": "Alter and inspect the roof-corner extrusion.", "app": "SketchUp 2026", "details": "The Push/Pull tool showed an approximately 1/8-inch distance before the view was orbited."}, {"start_s": 27213.412, "end_s": 27223.429, "action": "Activated Push/Pull, entered a 1-inch value, and orbited/zoomed the model to review the extended roof-edge and corner face.", "intent": "Set the roof-edge depth and inspect the result.", "app": "SketchUp 2026", "details": "The view widened to show the facade, windows, and the edited corner assembly."}, {"start_s": 27223.429, "end_s": 27233.956, "action": "Selected the right-side corner face, made additional clicks and a short drag, typed a scale-related value, and activated the Move tool on the corner geometry.", "intent": "Adjust and prepare to reposition the corner component.", "app": "SketchUp 2026", "details": "The selected face changed from stippled selection to a solid gray face while the Move tool became active."}, {"start_s": 27233.956, "end_s": 27243.797, "action": "Entered a 4-inch value and confirmed it, then moved the selected corner component and orbited/zoomed outward to inspect its placement along the roof edge.", "intent": "Reposition the corner component and verify alignment.", "app": "SketchUp 2026", "details": "The final view showed the edited roof assembly from a wider exterior angle with the tool still awaiting or displaying a distance."}, {"start_s": 27243.797, "end_s": 27253.765, "action": "Orbited and zoomed around the building\u2019s roof and upper facade, then adjusted the camera to reveal the windows and overhang.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27253.765, "end_s": 27263.734, "action": "Continued orbiting and zooming around the front facade, moving from a close roof view to a wider view of the windows, balcony, and overhang.", "intent": "Review the building facade and roof geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 27263.734, "end_s": 27273.592, "action": "Entered a keyboard character, selected and manipulated the model view, then orbited and zoomed to a centered front view of the facade and balcony.", "intent": "Reposition the camera for a clearer inspection of the building exterior.", "app": "SketchUp 2026", "details": null}, {"start_s": 27273.592, "end_s": 27283.45, "action": "Orbited and zoomed extensively from close roof and column geometry to a wide perspective showing the full building exterior and adjacent structure.", "intent": "Inspect the overall exterior form and surrounding context.", "app": "SketchUp 2026", "details": null}, {"start_s": 27283.45, "end_s": 27293.273, "action": "Orbited and zoomed around the building\u2019s side and roof edge, transitioning from a wide exterior view to a close-up of the side wall, windows, and overhang.", "intent": "Examine side facade and roof details.", "app": "SketchUp 2026", "details": null}, {"start_s": 27293.273, "end_s": 27303.295, "action": "Clicked and dragged repeatedly while orbiting and zooming around the side facade, ending on an elevated view of the roofline, wall, windows, and corner overhang.", "intent": "Continue reviewing the building\u2019s side and roof geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 27303.295, "end_s": 27313.052, "action": "Orbited and zoomed around the building roof and overhang, clicked repeatedly near the roof edge, and dragged to adjust the view.", "intent": "Inspect the roof-edge geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 27313.052, "end_s": 27322.689, "action": "Orbited and zoomed toward the roof corner, selected or manipulated the roof-edge area, and entered a move operation with a distance of 5 inches visible.", "intent": "Position or adjust a roof-edge component.", "app": "SketchUp 2026", "details": "The Move tool was active near the end of the span."}, {"start_s": 27322.689, "end_s": 27333.524, "action": "Selected the underside face near the roof corner, used keyboard shortcuts, and began drawing a rectangular shape on the face.", "intent": "Create or modify geometry on the roof underside.", "app": "SketchUp 2026", "details": "The drawing tool showed first-corner and opposite-corner prompts, with a 2-foot dimension visible."}, {"start_s": 27333.524, "end_s": 27342.985, "action": "Entered additional keyboard shortcuts, clicked and dragged on the underside face, and repositioned the drawing cursor near the roof corner.", "intent": "Continue constructing or editing the roof-underside geometry.", "app": "SketchUp 2026", "details": "The drawing tool remained active and prompted for the first corner."}, {"start_s": 27342.985, "end_s": 27353.213, "action": "Entered keyboard shortcuts and a one-foot value, then used the Push/Pull tool on the selected underside face; orbited and zoomed out to review the resulting roof overhang.", "intent": "Extrude the selected roof-underside face and inspect the result.", "app": "SketchUp 2026", "details": "The Push/Pull distance field showed 1 foot."}, {"start_s": 27353.213, "end_s": 27363.125, "action": "Orbited around the building fa\u00e7ade and roof overhang, clicked roof and wall geometry, and adjusted the view to inspect the modified overhang from below and from the side.", "intent": "Review the edited roof geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view showed roof edges highlighted in blue."}, {"start_s": 27363.125, "end_s": 27373.252, "action": "Entered a distance value of 4 inches and confirmed it, then moved the view and adjusted a selected vertical face with the active SketchUp tool.", "intent": "Modify the selected architectural element using a precise distance.", "app": "SketchUp 2026", "details": "The model shows a close-up of a building corner and roof/ceiling geometry."}, {"start_s": 27373.252, "end_s": 27383.675, "action": "Navigated around the SketchUp scene with scrolling and middle-button orbiting, changing from a close-up to an elevated view of two building models and then toward the larger building facade.", "intent": "Inspect the architectural model from different viewpoints.", "app": "SketchUp 2026", "details": "The view ends on the larger building with roof, windows, balcony railings, and a partial second structure."}, {"start_s": 27383.675, "end_s": 27391.094, "action": "Continued orbiting and zooming around the larger building, moving from a close roof-and-window close-up to a wider elevated exterior view.", "intent": "Review the building exterior and camera positioning.", "app": "SketchUp 2026", "details": "No geometry edits are visibly performed; navigation focuses on the roof and glazed facade."}, {"start_s": 27391.094, "end_s": 27401.269, "action": "Zoomed and orbited closer to the building roof and front facade, ending on a close elevated view of the roof edge, windows, and balcony.", "intent": "Inspect exterior details from a closer angle.", "app": "SketchUp 2026", "details": "The active tool remains the selection/orbit navigation environment."}, {"start_s": 27401.269, "end_s": 27411.888, "action": "Orbited and zoomed around the building exterior, shifting from an elevated facade view to a frontal view and then back to the opposite glazed facade.", "intent": "Examine the building elevations and exterior openings.", "app": "SketchUp 2026", "details": "The model visibly includes doors, windows, balcony railings, roof overhangs, and wall vents."}, {"start_s": 27411.888, "end_s": 27421.965, "action": "Continued middle-button orbiting and scrolling around the building, moving past a side door and balcony to an elevated view of another facade and adjacent structure.", "intent": "Inspect additional exterior sides of the architectural model.", "app": "SketchUp 2026", "details": "The final view shows a roof edge, brown door, glazed opening, and nearby building geometry."}, {"start_s": 27421.965, "end_s": 27432.433, "action": "Navigated around the SketchUp model with middle-clicks, scrolling, and a brief drag, then typed \u201cm\u201d to invoke a tool.", "intent": "Adjust the 3D view and begin a modeling command.", "app": "SketchUp 2026", "details": "The view shifted to a close-up of the building roof and wall geometry."}, {"start_s": 27432.433, "end_s": 27440.745, "action": "Continued navigating the model with scrolling and clicked or dragged on the roof and wall area while the Move tool remained active.", "intent": "Reposition the view and work on nearby geometry.", "app": "SketchUp 2026", "details": "The camera remained focused on the roof overhang and adjacent wall surfaces."}, {"start_s": 27440.745, "end_s": 27450.57, "action": "Entered a numeric value ending with \u201c4\u201d and confirmed it, clicked around the roof edge, used an undo keystroke, and continued scrolling and view navigation.", "intent": "Apply or test a precise modeling adjustment while inspecting the result.", "app": "SketchUp 2026", "details": "The close-up view changed around the roof corner and wall junction."}, {"start_s": 27450.57, "end_s": 27460.645, "action": "Orbit-navigated extensively with middle-clicks and scrolling, selected geometry near the roof edge with repeated clicks, dragged briefly, and ended with a middle-click.", "intent": "Inspect and select roof-edge geometry from different viewpoints.", "app": "SketchUp 2026", "details": "A roof corner became selected, with a blue-highlighted edge visible near the end."}, {"start_s": 27460.645, "end_s": 27470.682, "action": "Navigated around the selected roof geometry, typed \u201cm,\u201d clicked and dragged the roof edge, then entered a value ending with \u201c4\u201d and confirmed it.", "intent": "Move or copy the selected roof-edge geometry using a measured distance.", "app": "SketchUp 2026", "details": "SketchUp displayed the Move/Copy workflow and a distance readout while the roof edge remained highlighted."}, {"start_s": 27470.682, "end_s": 27480.153, "action": "Continued the active modeling operation by scrolling, clicking and dragging on the roof face, typing \u201cp\u201d and spacing input, and orbiting to inspect the resulting geometry.", "intent": "Modify the roof face and review the updated model from another angle.", "app": "SketchUp 2026", "details": "The Push/Pull-style tool was active briefly; the final view showed the building corner and roof surfaces from a shifted perspective."}, {"start_s": 27480.153, "end_s": 27489.743, "action": "Navigated around the SketchUp building model with repeated scrolling, clicks, and orbiting, shifting from an overhead view to a close underside perspective.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 27489.743, "end_s": 27499.983, "action": "Zoomed and orbited closely around the building\u2019s exterior wall and roof edge, clicked the wall area repeatedly, and entered the letter \u201cp\u201d.", "intent": "Position the view and prepare to modify a model face.", "app": "SketchUp", "details": null}, {"start_s": 27499.983, "end_s": 27509.939, "action": "Continued clicking, scrolling, and orbiting around the upper wall and roof junction, bringing the camera to a close view of the wall face and overhang.", "intent": "Inspect and target a specific exterior face.", "app": "SketchUp", "details": null}, {"start_s": 27509.939, "end_s": 27520.089, "action": "Selected the close-up wall/roof area, entered drawing-related keyboard input including \u201cr\u201d and \u201c4\"\u201d, and positioned the cursor on the face where the line tool indicated \u201cOn Face.\u201d", "intent": "Create or dimension geometry on the exterior face.", "app": "SketchUp", "details": "The Line tool was active and the status bar showed that the cursor was on a face."}, {"start_s": 27520.089, "end_s": 27530.25, "action": "Completed additional coordinate-like input with commas, 4\", and Enter, then entered \u201cp\u201d and \u201c1'\u201d, and adjusted the view to reveal a small selected rectangular face near the roof edge.", "intent": "Draw and size a small piece of geometry on the building exterior.", "app": "SketchUp", "details": "A small rectangular face was visibly selected near the upper wall/overhang."}, {"start_s": 27530.25, "end_s": 27540.041, "action": "Scrolled and orbited to reframe the model, activated Push/Pull, and dragged the selected exterior face outward, visibly extending it into a larger projecting section.", "intent": "Extrude the newly created exterior face.", "app": "SketchUp", "details": "The Push/Pull tool was active; the final view showed the selected face extended outward with a distance readout."}, {"start_s": 27540.041, "end_s": 27550.358, "action": "Navigated around the SketchUp model with middle-clicks and scroll gestures, moving from a close-up building corner to a wider exterior view.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27550.358, "end_s": 27560.246, "action": "Continued orbiting and zooming around the model, transitioning from a broad view of multiple buildings to a closer view of the main building facade and balconies.", "intent": "Review exterior geometry and facade details.", "app": "SketchUp 2026", "details": null}, {"start_s": 27560.246, "end_s": 27569.919, "action": "Adjusted the camera through orbit and zoom gestures, briefly selecting or interacting with model geometry, and ended at a low-angle view of the building exterior.", "intent": "Examine the building from alternate angles.", "app": "SketchUp 2026", "details": "System-level network, power, and input-source changes were detected at the end of the span."}, {"start_s": 27569.919, "end_s": 27579.951, "action": "Orbiting and zooming brought the view toward a recessed entrance with a brown door and balcony railing; repeated clicks interacted with geometry near the entry and roof edge.", "intent": "Inspect or adjust exterior elements around the entrance and overhang.", "app": "SketchUp 2026", "details": null}, {"start_s": 27579.951, "end_s": 27589.832, "action": "Selected geometry near the roof overhang, entered a 4-inch distance, and then used the Push/Pull tool to modify the selected face by approximately 3 3/8 inches.", "intent": "Adjust the dimensions of a roof or overhang component.", "app": "SketchUp 2026", "details": "The SketchUp measurement field visibly showed 4 inches before the subsequent Push/Pull operation."}, {"start_s": 27589.832, "end_s": 27600.173, "action": "Entered a 1-inch measurement, adjusted the view, and used zoom/orbit controls to return from a blank close-up to a broader exterior view of the modeled buildings.", "intent": "Apply or inspect a small dimensional adjustment and review the overall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 27600.173, "end_s": 27610.754, "action": "Navigated around the close-up SketchUp model with middle-clicks and scrolls, then selected geometry near the roof and wall junction.", "intent": "Inspect and select model geometry in a tight architectural detail.", "app": "SketchUp 2026", "details": "The view remained focused on intersecting white and gray building surfaces; selected edges appeared blue by the end."}, {"start_s": 27610.754, "end_s": 27621.688, "action": "Clicked repeatedly on the selected corner, entered a short text/value sequence, and activated the Move tool while repositioning the view around the roof-edge detail.", "intent": "Adjust or position a model element using SketchUp's move workflow.", "app": "SketchUp 2026", "details": "The Move tool was active near the end, with the model still shown in close-up."}, {"start_s": 27621.688, "end_s": 27632.014, "action": "Dragged and navigated across the model, then activated Push/Pull and clicked a face or edge while changing the camera angle.", "intent": "Modify a building face or inspect it with the Push/Pull tool.", "app": "SketchUp 2026", "details": "SketchUp displayed Push/Pull prompts and a distance readout while the view shifted to a larger roof surface."}, {"start_s": 27632.014, "end_s": 27642.217, "action": "Navigated extensively through the model with scrolls and middle-clicks, clicked an interior or exterior face, and changed the camera to reveal a wall, wood-toned door, and framed opening.", "intent": "Inspect the building model from different angles and locate a fa\u00e7ade element.", "app": "SketchUp 2026", "details": "The view transitioned from a broad gray roof surface to a close-up of wall and doorway components."}, {"start_s": 27642.217, "end_s": 27651.969, "action": "Orbited and zoomed out repeatedly around the building, moving from a close-up doorway area to a broad exterior view of the modeled row of units.", "intent": "Review the overall architectural model and its exterior fa\u00e7ade.", "app": "SketchUp 2026", "details": "The final view showed multiple white flat-roofed units with doors, windows, and balcony railings."}, {"start_s": 27651.969, "end_s": 27661.468, "action": "Returned to the close-up detail with orbiting and zooming, clicked near the wall and opening, and activated Push/Pull on the adjacent face.", "intent": "Continue editing or inspecting the selected architectural detail.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active with a distance readout while the view focused on the white wall and narrow gray edge."}, {"start_s": 27661.468, "end_s": 27671.995, "action": "Navigated the SketchUp model with clicks, drags, and scrolls, changing from a close-up view of the building to an exterior perspective showing the facade, windows, doors, and balcony railings.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27671.995, "end_s": 27677.176, "action": "Continued orbiting and zooming around the model, moving from an oblique facade view to a higher overhead perspective of the flat-roofed building and surrounding structure.", "intent": "Review the building massing and roof layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 27677.176, "end_s": 27697.176, "action": "Paused on an elevated overview of the modeled building and a second structure in the background without recorded interaction.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 27697.176, "end_s": 27707.26, "action": "Orbited and zoomed around the building with repeated middle-button navigation and scrolls, transitioning from a close elevated corner view to a wider frontal view of the facade and entrances.", "intent": "Inspect additional exterior elevations.", "app": "SketchUp 2026", "details": null}, {"start_s": 27707.26, "end_s": 27717.971, "action": "Adjusted the camera around the front of the building, then zoomed sharply toward a small wall window until it filled the view.", "intent": "Examine the facade window detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 27717.971, "end_s": 27728.118, "action": "Navigated back from the close window view and repositioned the camera to a centered front elevation, showing the two doors, windows, balconies, roof, and adjacent structure.", "intent": "Return to and inspect a centered front elevation.", "app": "SketchUp 2026", "details": null}, {"start_s": 27728.118, "end_s": 27738.041, "action": "Orbit and zoom out from the exterior building view, revealing the separate floor-plan model beside the building.", "intent": "Review the overall building and floor-plan models from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27738.041, "end_s": 27745.489, "action": "Orbit and zoom toward the building interior, centering on the elevator and adjacent staircase, then adjust to an elevated view of the stair enclosure.", "intent": "Inspect the elevator and stair area in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 27745.489, "end_s": 27753.711, "action": "Zoom and orbit closely over the patterned floor surface and its intersecting edges, ending on an extreme close-up of the floor junction.", "intent": "Inspect the floor finish and nearby model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 27753.711, "end_s": 27763.594, "action": "Continue zooming and orbiting across the floor texture and model edges, then zoom back out to show both the interior floor plan and the exterior building; briefly click and drag in the viewport.", "intent": "Navigate between detailed and overall views of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 27763.594, "end_s": 27773.768, "action": "Orbit and zoom around the exterior building and adjacent interior floor plan, alternating between closer roof views and wider views of both models.", "intent": "Review the building layout and compare the exterior model with the interior plan.", "app": "SketchUp 2026", "details": null}, {"start_s": 27773.768, "end_s": 27788.387, "action": "Orbit and zoom to a wider side-by-side view of the interior floor plan and exterior building, then click the taskbar area and bring up a preview for the recorder window.", "intent": "Finish the model review and switch toward another application window.", "app": "SketchUp 2026", "details": "A recorder taskbar preview is visible at the end."}, {"start_s": 27788.387, "end_s": 27798.569, "action": "Switched to the SketchUp window and orbited/zoomed around the architectural model using middle-button clicks and scroll gestures, moving from an overview toward the roof and exterior surfaces.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "Screen recorder", "details": "SketchUp 2026 displayed the building model."}, {"start_s": 27798.569, "end_s": 27808.676, "action": "Continued orbiting and zooming around the model, transitioning from a roof-level view to a wider exterior view of the building facade and roof.", "intent": "Review the exterior geometry from another angle.", "app": "Screen recorder", "details": "The model view changed to show the facade, roof, doors, windows, and balconies."}, {"start_s": 27808.676, "end_s": 27818.344, "action": "Orbited and zoomed toward a close-up of the roof edge and projecting wall geometry, then clicked several model locations and entered the letter \u201cm.\u201d", "intent": "Examine or prepare to modify a specific model element.", "app": "Screen recorder", "details": "The view ended on a close-up of intersecting roof and wall surfaces."}, {"start_s": 27818.344, "end_s": 27828.137, "action": "Entered \u201c6\u201d followed by Enter and \u201cp,\u201d selected a face, activated Push/Pull, scrolled, and dragged on the model; the view shifted to an exterior roof and facade area.", "intent": "Edit the selected architectural face with SketchUp modeling tools.", "app": "Screen recorder", "details": "Push/Pull was active and the status bar showed a distance measurement."}, {"start_s": 27828.137, "end_s": 27838.601, "action": "Scrolled and orbited around the building exterior, clicked and dragged on model geometry, and repositioned the view from a close roof-edge area to a broader facade with a window and door.", "intent": "Continue inspecting or adjusting the exterior model geometry.", "app": "Screen recorder", "details": "The model remained in SketchUp with exterior walls, roof edges, window, and door visible."}, {"start_s": 27838.601, "end_s": 27847.669, "action": "Zoomed and clicked repeatedly near a roof and wall junction, entered \u201cm,\u201d then selected and began moving a model element; the move tool displayed a distance of approximately 5 5/16 inches.", "intent": "Move or position the selected architectural element at the roof junction.", "app": "Screen recorder", "details": "The final view showed an active Move operation with a selected point and distance readout."}, {"start_s": 27847.669, "end_s": 27857.562, "action": "Scrolled and clicked in the SketchUp model, entered short keyboard commands, and changed the view around the roof and wall junction.", "intent": "Adjust the model view and interact with geometry near the junction.", "app": "SketchUp 2026", "details": null}, {"start_s": 27857.562, "end_s": 27867.912, "action": "Entered additional keyboard commands, clicked the model, and switched to the Line tool to begin defining geometry at the roof corner.", "intent": "Set up and start drawing geometry at the corner.", "app": "SketchUp 2026", "details": "The Line tool was active at the end, with the first corner indicated near the roof edge."}, {"start_s": 27867.912, "end_s": 27877.721, "action": "Dragged and edited geometry near the roof junction, entered a distance value, and used middle-mouse navigation to move the camera to a broader building view.", "intent": "Create or adjust a small roof-junction element and inspect it in context.", "app": "SketchUp 2026", "details": "A small dark-faced rectangular element appeared beneath the roof edge before the view changed."}, {"start_s": 27877.721, "end_s": 27887.051, "action": "Navigated to the roof edge, selected and moved a small rectangular component, and entered additional keyboard commands while positioning it near the overhang.", "intent": "Position a roof-edge component against the surrounding structure.", "app": "SketchUp 2026", "details": "The component was shown selected or in move mode beneath the roof overhang."}, {"start_s": 27887.051, "end_s": 27896.761, "action": "Entered a distance value, clicked the model, and continued moving the rectangular component along the roof-edge area; then typed another command to begin the next operation.", "intent": "Refine the placement and dimensions of the roof-edge component.", "app": "SketchUp 2026", "details": "The displayed move distance changed from approximately 1 3/16 inches to 4 inches."}, {"start_s": 27896.761, "end_s": 27906.512, "action": "Clicked and scrolled through the model, orbited and panned the camera around the building exterior, and inspected the roof overhang and repeated corner elements from wider angles.", "intent": "Review the edited roof-edge geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the building facade and a projecting roof-edge element with the Push/Pull tool active."}, {"start_s": 27906.512, "end_s": 27917.564, "action": "Orbit and pan around the SketchUp model, then change the camera to inspect the building from above and across its roofline.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 27917.564, "end_s": 27928.206, "action": "Select a model element, activate the Move/Copy operation, enter a 5-inch distance, and continue repositioning the selected geometry.", "intent": "Copy or move a selected architectural element by a specified distance.", "app": "SketchUp 2026", "details": "The distance field visibly contains 5\"."}, {"start_s": 27928.206, "end_s": 27939.718, "action": "Orbit and pan around the selected building area, then switch to Push/Pull and position the tool over a wall face without a visible extrusion result.", "intent": "Inspect and prepare to modify the building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 27939.718, "end_s": 27949.371, "action": "Orbit out to review the full building and nearby structure, changing from a close-up wall view to an exterior perspective.", "intent": "Review the overall model after the geometry adjustments.", "app": "SketchUp 2026", "details": null}, {"start_s": 27949.371, "end_s": 27961.017, "action": "Orbit and zoom toward the building facade, inspecting the roof edge, door, window, balcony railing, and wall vent from several angles.", "intent": "Examine facade details in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 27961.017, "end_s": 27971.0, "action": "Orbit and zoom into another entrance facade, select the area near the roof edge, then activate Push/Pull and set a 1-inch distance while focusing on the balcony and door geometry.", "intent": "Prepare or apply a small Push/Pull adjustment to the facade geometry.", "app": "SketchUp 2026", "details": "The Push/Pull distance field visibly shows 1\"."}, {"start_s": 27971.0, "end_s": 27979.009, "action": "Scrolled through the SketchUp model and clicked the facade near the door and window, changing the active Push/Pull distance from 1 inch to 4 inches.", "intent": "Adjust a selected architectural face.", "app": "SketchUp 2026", "details": "Viewed a close-up of the upper facade and balcony area."}, {"start_s": 27979.009, "end_s": 27988.884, "action": "Scrolled and zoomed out to review the building exterior, then clicked around the right roof and facade while switching back to the Select tool.", "intent": "Inspect the model and select exterior geometry.", "app": "SketchUp 2026", "details": "The view ended on a wider front-right perspective of the building."}, {"start_s": 27988.884, "end_s": 27999.094, "action": "Clicked and dragged around the right balcony and facade, scrolled to reposition the view, and orbited the model to a broader front elevation.", "intent": "Inspect and navigate the exterior model.", "app": "SketchUp 2026", "details": "The final view showed the front wall, doors, windows, balconies, and roof."}, {"start_s": 27999.094, "end_s": 28009.092, "action": "Orbited and zoomed around the building, briefly viewing the full front elevation before moving to a close-up of the roof edge and wall corner.", "intent": "Examine roof and facade geometry from different angles.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; the activity primarily navigated the camera."}, {"start_s": 28009.092, "end_s": 28019.456, "action": "Selected the Line tool and clicked near the roof-edge corner while entering several shortcut keys, then switched to Push/Pull and adjusted the newly highlighted roof-edge face to about 2 feet 2 15/16 inches.", "intent": "Modify the roof-edge geometry.", "app": "SketchUp 2026", "details": "The close-up showed a small roof-edge section being pulled outward or inward."}, {"start_s": 28019.456, "end_s": 28030.117, "action": "Entered 1 foot and confirmed it, clicked the roof-edge area, then scrolled and navigated to inspect the resulting roof and upper facade from wider and overhead views.", "intent": "Set a precise roof-edge dimension and review the result.", "app": "SketchUp 2026", "details": "The final view focused on the roof surface and the modified corner."}, {"start_s": 28030.117, "end_s": 28040.898, "action": "Scrolled and navigated around the SketchUp model, clicked the small projecting face, and changed the camera view to inspect the corner geometry.", "intent": "Inspect and position the model view around the corner feature.", "app": "SketchUp 2026", "details": "The projecting rectangular face remained visible while the viewpoint shifted."}, {"start_s": 28040.898, "end_s": 28050.718, "action": "Activated the Move tool, selected the small face, and entered a 4-inch distance while positioning the copy or move operation.", "intent": "Move or copy the selected face by a precise distance.", "app": "SketchUp 2026", "details": "The status bar showed Move-tool guidance and Distance ~4\"."}, {"start_s": 28050.718, "end_s": 28060.885, "action": "Selected the projecting face, activated Push/Pull, and attempted to adjust its extrusion; the operation displayed an offset-limit warning before returning to selection.", "intent": "Modify the face extrusion while testing the allowable offset.", "app": "SketchUp 2026", "details": "SketchUp displayed \u201cOffset limited to 6' 6\"\u201d during the Push/Pull operation."}, {"start_s": 28060.885, "end_s": 28071.576, "action": "Activated Move, selected the face, entered a 4-inch constrained distance, and orbited or scrolled the view to inspect the resulting position.", "intent": "Precisely reposition the model feature and review its placement.", "app": "SketchUp 2026", "details": "The Move tool showed an on-green-axis constraint and a 4-inch distance, followed by a changed viewpoint."}, {"start_s": 28071.576, "end_s": 28082.39, "action": "Selected a vertical face, used Push/Pull or related modeling controls, and zoomed or orbited out to review the corner and surrounding building geometry.", "intent": "Adjust and inspect the selected architectural face in context.", "app": "SketchUp 2026", "details": "The view widened to reveal the corner feature and a larger portion of the model."}, {"start_s": 28082.39, "end_s": 28092.133, "action": "Changed the camera view, activated the Tape Measure tool, and dragged across the model to create or measure a guide line, ending with a close-up inspection.", "intent": "Measure or align geometry near the building corner.", "app": "SketchUp 2026", "details": "The Tape Measure status bar showed a length of about 6 1/8 inches before the view shifted closer."}, {"start_s": 28092.133, "end_s": 28103.24, "action": "Navigated around the SketchUp model with clicks, scrolling, and orbiting; entered measurement text including 6\" and confirmed it, leaving the camera focused on the building geometry.", "intent": "Inspect and adjust the architectural model view and geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28103.24, "end_s": 28112.191, "action": "Orbit-rotated and zoomed the SketchUp camera from a close-up of the building facade to a wider exterior view, ending with the full roof and front elevation visible.", "intent": "Review the overall exterior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28112.191, "end_s": 28122.194, "action": "Continued orbiting and zooming toward the roof overhang and facade; selected geometry and activated a drawing tool, leaving the view tightly framed on the roof edge.", "intent": "Inspect and prepare to modify the roof-edge geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28122.194, "end_s": 28132.059, "action": "Selected the underside face of the roof overhang and used Push/Pull-style interaction, entering a distance of 1\" and confirming it; the edited face remained highlighted.", "intent": "Adjust the depth of the roof overhang face.", "app": "SketchUp 2026", "details": "The status bar showed Push/Pull controls and a distance field during the edit."}, {"start_s": 28132.059, "end_s": 28142.122, "action": "Orbit-rotated around the edited overhang, selected nearby geometry, and entered a 4\" measurement; then activated the Move tool and positioned the cursor on a midpoint of the overhang edge.", "intent": "Inspect the edited roof edge and prepare to move related geometry.", "app": "SketchUp 2026", "details": "A Midpoint inference label was visible while the Move tool was active."}, {"start_s": 28142.122, "end_s": 28152.19, "action": "Entered Push/Pull mode and navigated around the roof overhang with orbiting and zooming; selected the end face and left it highlighted in the final side view.", "intent": "Inspect and continue editing the roof overhang geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28152.19, "end_s": 28161.974, "action": "Adjusted the SketchUp model with clicks, brief text entry, dragging, and scrolling, changing from a close-up wall view to an exterior building view.", "intent": "Modify and inspect the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 28161.974, "end_s": 28171.879, "action": "Scrolled and orbited around the SketchUp scene, moving from an overhead view of two buildings to a low exterior view of the larger building.", "intent": "Inspect the buildings from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28171.879, "end_s": 28179.919, "action": "Scrolled and orbited extensively, shifting from a close interior floor-plan view to a distant overhead view showing both building models.", "intent": "Review the overall model layout and perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 28179.919, "end_s": 28189.853, "action": "Continued zooming and orbiting around the scene, then clicked the larger building so its geometry became highlighted in blue.", "intent": "Navigate the scene and select the larger building model.", "app": "SketchUp 2026", "details": "The larger building is visibly selected at the end of the span."}, {"start_s": 28189.853, "end_s": 28199.954, "action": "Zoomed and orbited around the two-building scene, changing from an elevated view to a more distant rear-side view while keeping the models visible.", "intent": "Inspect the selected building and surrounding model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 28199.954, "end_s": 28209.323, "action": "Orbited and zoomed the scene, then dragged across the model to select geometry; ended with part of the building highlighted in blue in a low exterior view.", "intent": "Adjust the viewpoint and select model geometry for inspection or editing.", "app": "SketchUp 2026", "details": "The final view shows selected building geometry against the sky."}, {"start_s": 28209.323, "end_s": 28218.58, "action": "Navigated around the SketchUp scene, zooming and orbiting between two building models; selected geometry and began a text-entry action near the end.", "intent": "Inspect and adjust the 3D building models.", "app": "SketchUp 2026", "details": "Two architectural models remained visible, with one building highlighted in blue during part of the navigation."}, {"start_s": 28218.58, "end_s": 28228.768, "action": "Orbited and zoomed from the overall scene into the exterior of the right-hand building, then returned to a wider view showing both models.", "intent": "Review the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "The close view showed a door, balcony railing, windows, and exterior walls."}, {"start_s": 28228.768, "end_s": 28238.771, "action": "Orbited and zoomed toward the interior model, moving from an overall view to a close inspection of its rooms, tiled floor, doors, and stair area.", "intent": "Inspect the interior layout and architectural details.", "app": "SketchUp 2026", "details": "The camera ended on a close interior view with partition walls, doors, tiled flooring, and stairs."}, {"start_s": 28238.771, "end_s": 28250.069, "action": "Selected interior geometry, entered keyboard input including a value followed by Enter, and began dragging a selected element with the active modification tool.", "intent": "Modify a selected architectural element using a tool and numeric input.", "app": "SketchUp 2026", "details": "Selected edges and a small upper interior structure were highlighted; the status bar showed an offset-style operation with a distance value."}, {"start_s": 28250.069, "end_s": 28261.231, "action": "Zoomed and orbited around the interior model, selected several floor or boundary elements, and navigated back to a wider view with the surrounding base area highlighted.", "intent": "Inspect and select model geometry around the building footprint.", "app": "SketchUp 2026", "details": "The final view showed the interior building on a large highlighted rectangular base beside the second building."}, {"start_s": 28261.231, "end_s": 28271.033, "action": "Orbited and zoomed into the interior, selected a wall or face, and used a push/pull-style tool to adjust the selected surface while entering a character.", "intent": "Edit the interior geometry with a face-modification tool.", "app": "SketchUp 2026", "details": "The final close view showed the tiled floor and surrounding partition walls with the active tool cursor on a wall face."}, {"start_s": 28271.033, "end_s": 28281.113, "action": "Navigated around the SketchUp house model with repeated clicks, scrolling, and view adjustments, then zoomed out to show the building footprint and surrounding geometry.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28281.113, "end_s": 28291.43, "action": "Scrolled and navigated to an exterior wall and window area, selected drawing geometry, and activated a drawing tool near the wall corner.", "intent": "Position the view and begin editing wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28291.43, "end_s": 28301.061, "action": "Selected a narrow wall face, then used the drawing tool to place or adjust geometry along the upper wall corner; the face remained highlighted during the edit.", "intent": "Modify the wall or opening geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28301.061, "end_s": 28310.623, "action": "Continued editing the upper wall corner with clicks and drags, selected a narrow rectangular face, and adjusted the corner geometry with the active drawing tool.", "intent": "Refine the wall detail and corner shape.", "app": "SketchUp 2026", "details": null}, {"start_s": 28310.623, "end_s": 28321.116, "action": "Selected the narrow wall element, entered a 6'6\" dimension and confirmed it, then orbited and zoomed the model to inspect the resulting geometry.", "intent": "Set a precise dimension and review the edited wall element.", "app": "SketchUp 2026", "details": "The dimension entry was visibly completed as 6'6\" followed by Enter."}, {"start_s": 28321.116, "end_s": 28331.165, "action": "Orbited and zoomed out around the house model, selected the exterior wall end, and activated the push/pull tool on its end face.", "intent": "Inspect the model and prepare to extrude or adjust the exterior wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 28331.165, "end_s": 28340.276, "action": "Scrolled and clicked around the wall model while using the Push/Pull tool, changing the view and leaving a wall face selected.", "intent": "Adjust the wall geometry or inspect its face.", "app": "SketchUp 2026", "details": "The model view shifted from a close-up wall corner to a wider wall-and-room view; no definite numeric extrusion result was visible."}, {"start_s": 28340.276, "end_s": 28350.228, "action": "Clicked and scrolled around the selected wall, then orbited and zoomed out to reveal the broader house layout.", "intent": "Inspect the wall in relation to the overall floor plan.", "app": "SketchUp 2026", "details": "The view ended in a distant elevated perspective of the house model."}, {"start_s": 28350.228, "end_s": 28360.264, "action": "Scrolled, clicked, and dragged while orbiting around the house, moving from an elevated overview to close views of the exterior wall and side facade.", "intent": "Review the exterior wall placement and surrounding model geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained active and the wall face was repeatedly targeted."}, {"start_s": 28360.264, "end_s": 28369.757, "action": "Scrolled and clicked through several wall and floor areas, orbiting from the exterior side toward the tiled room and selecting a wall face.", "intent": "Inspect or modify faces around the room perimeter.", "app": "SketchUp 2026", "details": "The model alternated between close and elevated views; no confirmed geometry change was visible."}, {"start_s": 28369.757, "end_s": 28380.804, "action": "Scrolled and orbited away from the close wall view, then switched to selection-oriented interaction and zoomed out to show two separate building models.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2026", "details": "The final view showed a smaller open-roof house beside a larger completed-looking building."}, {"start_s": 28380.804, "end_s": 28389.858, "action": "Scrolled and orbited around the building models, moving from a close exterior perspective to a distant top-down overview.", "intent": "Inspect the complete model layout from multiple viewpoints.", "app": "SketchUp 2026", "details": "A system UI interaction occurred briefly during the span, but the visible work remained in SketchUp."}, {"start_s": 28389.858, "end_s": 28400.129, "action": "Scrolled and middle-clicked around the SketchUp model, adjusting the view of two building forms.", "intent": "Inspect the model from different views.", "app": "SketchUp 2026", "details": null}, {"start_s": 28400.129, "end_s": 28410.869, "action": "Clicked the right building form to select it, then typed \u201cm\u201d and began moving the selected object while zooming or scrolling.", "intent": "Select and reposition the right-side model component.", "app": "SketchUp 2026", "details": "The right building form became highlighted blue and showed a move bounding box."}, {"start_s": 28410.869, "end_s": 28420.826, "action": "Dragged the selected model component, typed a space, and continued manipulating the view; the camera briefly zoomed into the building interior before returning to the two-form view.", "intent": "Adjust the selected component and inspect its placement.", "app": "SketchUp 2026", "details": "A move operation was active with a displayed distance of approximately 3' 7 1/8\"."}, {"start_s": 28420.826, "end_s": 28431.272, "action": "Dragged and clicked in the model, then changed the display so the right building form showed a detailed floor-plan or wireframe overlay while continuing to zoom and scroll.", "intent": "Inspect the building geometry and floor-plan details.", "app": "SketchUp 2026", "details": "The right-side form transitioned from a solid white view to a detailed linework view."}, {"start_s": 28431.272, "end_s": 28435.512, "action": "Scrolled to zoom in on the two building forms, bringing the interior rooms of the left model closer into view.", "intent": "Examine the model at a closer scale.", "app": "SketchUp 2026", "details": null}, {"start_s": 28435.512, "end_s": 28455.512, "action": "Paused on the SketchUp model and later scrolled to further zoom and reposition the view, keeping the detailed left building and white right-side form visible.", "intent": "Continue visual inspection of the building models.", "app": "SketchUp 2026", "details": "No selection or editing result was visibly confirmed during the interval."}, {"start_s": 28455.512, "end_s": 28464.601, "action": "Scrolled through the SketchUp model and toggled the back-edge display, leaving the 3D house and floor-plan views with cleaner visible edges.", "intent": "Inspect and adjust model edge visibility.", "app": "SketchUp 2026", "details": null}, {"start_s": 28464.601, "end_s": 28474.435, "action": "Scrolled and orbited the model with middle-button clicks, changing from an overhead floor-plan view to an exterior/front perspective of the house components.", "intent": "Review the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28474.435, "end_s": 28483.665, "action": "Scrolled and orbited toward the floor plan, zooming into the furnished rooms and lower bedrooms until the interior layout filled the viewport.", "intent": "Inspect interior room layout and details.", "app": "SketchUp 2026", "details": null}, {"start_s": 28483.665, "end_s": 28492.338, "action": "Scrolled and zoomed into a room opening, then clicked repeatedly on the visible interior geometry; the view ended as a close-up of the selected opening and surrounding walls.", "intent": "Examine or select interior model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28492.338, "end_s": 28502.891, "action": "Selected the Line tool, clicked to define segments across the opening, typed a short input, and switched to Push/Pull; the selected face was shown with a 6-inch offset limit.", "intent": "Create and modify geometry on the interior face.", "app": "SketchUp 2026", "details": "The visible Push/Pull readout showed \u201cOffset limited to -6\u201d and Distance 6\u201d."}, {"start_s": 28502.891, "end_s": 28512.754, "action": "Entered keyboard input and used undo-like commands, then clicked the interior face repeatedly; the face became selected and the Line tool was active with a first-corner prompt.", "intent": "Adjust or restart the interior geometry operation.", "app": "SketchUp 2026", "details": null}, {"start_s": 28512.754, "end_s": 28522.585, "action": "Clicked and typed briefly, then activated Push/Pull and adjusted a selected face, changing the view from an interior room-like form to a mostly empty modeling area.", "intent": "Modify the selected SketchUp face with Push/Pull.", "app": "SketchUp 2026", "details": "Push/Pull tool was active at the end of the span."}, {"start_s": 28522.585, "end_s": 28532.711, "action": "Navigated around the SketchUp model with repeated middle-button orbit/pan and scroll actions, then clicked and dragged on the geometry to adjust the view or selection.", "intent": "Inspect and position the architectural model for further editing.", "app": "SketchUp 2026", "details": "The view changed from a wider building overview to a closer view of a large floor-like face and vertical column."}, {"start_s": 28532.711, "end_s": 28542.749, "action": "Scrolled and clicked through the model, then used Push/Pull on the top of a vertical rectangular element and on a large selected face, visibly changing the camera and selected geometry.", "intent": "Edit faces and inspect the resulting 3D geometry.", "app": "SketchUp 2026", "details": "The large floor face became selected with a stippled highlight near the end."}, {"start_s": 28542.749, "end_s": 28553.455, "action": "Scrolled and navigated across the model, clicked a face, and dragged with Push/Pull to modify a small rectangular opening or wall section.", "intent": "Continue shaping architectural faces with Push/Pull.", "app": "SketchUp 2026", "details": "The view ended focused on a small recessed or cutout region within a larger surface."}, {"start_s": 28553.455, "end_s": 28563.339, "action": "Navigated and zoomed around the geometry, clicked several faces, then dragged with Push/Pull to adjust a sloped or wall-like section.", "intent": "Inspect and modify another portion of the 3D model.", "app": "SketchUp 2026", "details": "The edited geometry remained selected while the camera moved to a close-up corner view."}, {"start_s": 28563.339, "end_s": 28572.906, "action": "Typed briefly, scrolled and navigated around the model, then clicked and dragged a face with Push/Pull, leaving a selected corner or wall face in close-up view.", "intent": "Make a final face adjustment and inspect the surrounding geometry.", "app": "SketchUp 2026", "details": "The Push/Pull distance field showed 0 inches at one point, and the final view showed a highlighted corner face."}, {"start_s": 28572.906, "end_s": 28582.411, "action": "Navigated around the SketchUp model with scrolls and middle-clicks, typed briefly, and activated Push/Pull on an inner wall face, leaving a face selected with a distance shown.", "intent": "Adjust or inspect the thickness of an interior wall or opening.", "app": "SketchUp 2026", "details": null}, {"start_s": 28582.411, "end_s": 28592.502, "action": "Continued manipulating the model with navigation clicks and scrolls, selected wall and floor faces, and used Push/Pull to modify or inspect the large surface around the opening.", "intent": "Refine the modeled building surfaces and interior opening.", "app": "SketchUp 2026", "details": null}, {"start_s": 28592.502, "end_s": 28602.829, "action": "Orbiting and zooming changed the view from a close-up surface to an overhead view of two building models, with repeated drags and clicks used to navigate and select geometry.", "intent": "Review the overall model arrangement and inspect the building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28602.829, "end_s": 28612.875, "action": "Zoomed and orbited around the two models, selected geometry, opened a context menu showing options such as Entity Info, Explode, Weld Edges, and Soften/Smooth Edges, then continued repositioning the view.", "intent": "Inspect and potentially edit selected model geometry using context-menu tools.", "app": "SketchUp 2026", "details": null}, {"start_s": 28612.875, "end_s": 28625.89, "action": "Navigated from the overhead model view into an angled view of the furnished building, using repeated middle-clicks and scrolls to orbit and zoom out for a broader inspection.", "intent": "Review the building layout and exterior perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 28625.89, "end_s": 28635.04, "action": "Continued orbiting and zooming around the building exterior, selected the right-hand building, typed briefly, and initiated a Move operation on selected geometry, ending in a close-up of the building facade and balcony.", "intent": "Position or copy selected building components while inspecting the exterior.", "app": "SketchUp 2026", "details": null}, {"start_s": 28635.04, "end_s": 28645.435, "action": "Scrolled and orbited the SketchUp model, then clicked and dragged in the viewport to change the camera from an elevated exterior view to a low side view of the buildings.", "intent": "Inspect the modeled buildings from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 28645.435, "end_s": 28655.221, "action": "Selected the Line tool, entered a short keyboard input, and clicked in the viewport while positioning over a building face; the tool remained ready to set the first endpoint.", "intent": "Prepare to draw a line on the model.", "app": "SketchUp 2026", "details": "The tooltip indicated \u201cOn Face in Group.\u201d"}, {"start_s": 28655.221, "end_s": 28665.674, "action": "Entered 3.5' and pressed Enter to set the line length, then left the Line tool active with the second endpoint still being positioned.", "intent": "Create a line segment with a specified length.", "app": "SketchUp 2026", "details": "The Length field visibly contained the entered value."}, {"start_s": 28665.674, "end_s": 28674.101, "action": "Orbited and repositioned the view, clicked the selected upper building group, and began moving it relative to the lower structure.", "intent": "Move the selected building component into position.", "app": "SketchUp 2026", "details": "The upper building was highlighted blue and the Move tool showed a distance readout."}, {"start_s": 28674.101, "end_s": 28684.143, "action": "Continued orbiting and zooming around the selected upper building while dragging it, changing the view to a close exterior and underside perspective.", "intent": "Continue positioning the selected building component.", "app": "SketchUp 2026", "details": "The selected component remained highlighted and the Move tool remained active."}, {"start_s": 28684.143, "end_s": 28694.607, "action": "Scrolled and orbited extensively around the model, clicking within the viewport while inspecting the selected building from close and underside angles.", "intent": "Inspect the placement and geometry of the building component.", "app": "SketchUp 2026", "details": "The final view showed the model from below with the upper structure separated above the lower structure."}, {"start_s": 28694.607, "end_s": 28705.127, "action": "Orbited and zoomed around the SketchUp house model, moving the view from an elevated exterior toward the ground-level courtyard and tiled floor.", "intent": "Inspect the building model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 28705.127, "end_s": 28714.415, "action": "Continued orbiting and zooming around the model, bringing the underside and interior courtyard into a closer, lower-angle view.", "intent": "Examine the lower-level structure and courtyard.", "app": "SketchUp 2026", "details": null}, {"start_s": 28714.415, "end_s": 28724.409, "action": "Rotated and zoomed back out to an elevated exterior view, then selected the upper building geometry so it became outlined in blue.", "intent": "Review and select the upper building portion.", "app": "SketchUp 2026", "details": null}, {"start_s": 28724.409, "end_s": 28734.183, "action": "Activated the Move tool and manipulated the selected upper building geometry, dragging it away from the lower structure while changing the view; entered short keyboard inputs during the move.", "intent": "Reposition or separate the selected upper building geometry.", "app": "SketchUp 2026", "details": "The upper structure is visibly offset to the right of the lower floor plan by the end of the span."}, {"start_s": 28734.183, "end_s": 28741.139, "action": "Orbited and zoomed out to show the separated upper building and lower floor plan side by side, then switched to a drawing tool and began drawing a rectangular element on the lower plan.", "intent": "Inspect the separated components and begin adding geometry.", "app": "SketchUp 2026", "details": "The drawing tool shows an in-progress rectangle with dimension readouts."}, {"start_s": 28741.139, "end_s": 28754.153, "action": "Paused with the SketchUp view showing the separated building and lower floor plan while the rectangle-drawing operation remained active; no substantive interaction was visible after a power-source change.", "intent": "Hold the current modeling state.", "app": "SketchUp 2026", "details": "The drawing cursor and dimension readout remain visible."}, {"start_s": 28754.153, "end_s": 28763.55, "action": "Adjusted the SketchUp model view and entered a distance value, then switched to orbiting the model.", "intent": "Modify the model view or geometry using a typed measurement.", "app": "SketchUp 2026", "details": "A roof or upper surface was selected initially, and the final view showed the two building masses from an elevated angle."}, {"start_s": 28763.55, "end_s": 28772.841, "action": "Selected and moved a building portion while entering a measurement, then orbited to a front-facing view of the house.", "intent": "Position a model component and inspect the resulting alignment.", "app": "SketchUp 2026", "details": "The upper building volume appeared highlighted during the move and was shown above the lower structure in the final view."}, {"start_s": 28772.841, "end_s": 28783.321, "action": "Orbited and zoomed the SketchUp camera around the house, moving from an elevated rear view to a closer front elevation.", "intent": "Inspect the building model from different exterior viewpoints.", "app": "SketchUp 2026", "details": "The view transitioned to a centered facade showing the upper doors, windows, balconies, and lower level."}, {"start_s": 28783.321, "end_s": 28796.196, "action": "Continued orbiting and zooming around the house, inspecting the upper facade, balconies, roof, and side elevations.", "intent": "Review exterior model details from multiple angles.", "app": "SketchUp 2026", "details": "The model shifted from a close front view to a more distant oblique view of the complete building."}, {"start_s": 28796.196, "end_s": 28806.499, "action": "Orbited and zoomed out around the model, then returned to a closer oblique view showing the roof, front doors, balconies, and covered lower area.", "intent": "Survey the overall building form and exterior arrangement.", "app": "SketchUp 2026", "details": "The camera moved through distant side views before ending at an elevated front-corner perspective."}, {"start_s": 28806.499, "end_s": 28816.28, "action": "Orbited the camera around the building and adjusted the view through several elevations, ending on a side perspective of the balconies, doors, roof slab, and covered parking area.", "intent": "Inspect additional exterior elevations of the house model.", "app": "SketchUp 2026", "details": "The final view showed the long side wall, upper balcony, front entry, lower windows, and paved covered area."}, {"start_s": 28816.28, "end_s": 28825.842, "action": "Clicked in the SketchUp model, typed \u201cp,\u201d clicked again, and entered a space while working around the upper terrace surface.", "intent": "Adjust or inspect the building model using SketchUp tools.", "app": "SketchUp 2026", "details": "The 3D model showed a multi-level building with terraces, railings, doors, windows, and a tiled covered area."}, {"start_s": 28825.842, "end_s": 28834.073, "action": "Selected the Select tool and used repeated middle-click navigation to reposition the camera toward the front of the building and covered tiled area.", "intent": "Navigate the 3D view to inspect the building facade and ground-level area.", "app": "SketchUp 2026", "details": "The view changed to a more frontal perspective of the upper doors, balconies, and tiled lower area."}, {"start_s": 28834.073, "end_s": 28846.003, "action": "Scrolled and used middle-click orbit navigation to move around the building, shifting from the covered area to an elevated side view of the balcony and windows.", "intent": "Review the building model from multiple exterior angles.", "app": "SketchUp 2026", "details": "The camera ended above a side walkway, looking down along the upper balcony and blue-tinted windows."}, {"start_s": 28846.003, "end_s": 28856.115, "action": "Continued orbiting and scrolling around the model, moving from an elevated side view to a wider front view showing the roof, balconies, and courtyard walls.", "intent": "Inspect the overall exterior geometry and roof layout.", "app": "SketchUp 2026", "details": "The view progressed through high-angle perspectives and ended at a centered front elevation."}, {"start_s": 28856.115, "end_s": 28865.894, "action": "Used repeated middle-click orbit and scroll navigation to rotate around the building\u2019s side and rear, inspecting the upper doors, balcony railings, windows, and perimeter walls.", "intent": "Review exterior details from additional viewpoints.", "app": "SketchUp 2026", "details": "The camera moved from a close side balcony view to a broad rear/side perspective of the building."}, {"start_s": 28865.894, "end_s": 28875.875, "action": "Clicked the model, typed \u201cp,\u201d entered a space, and continued clicking and scrolling; selected the long upper terrace edge, which became highlighted blue.", "intent": "Select or modify the terrace edge using SketchUp tools.", "app": "SketchUp 2026", "details": "The final view focused closely on the upper walkway and balcony, with the terrace perimeter edge visibly selected."}, {"start_s": 28875.875, "end_s": 28886.541, "action": "Selected an edge or face on the building model, then clicked and typed briefly while refining the selection; left the upper floor slab edge highlighted in blue.", "intent": "Inspect or select geometry in the architectural model.", "app": "SketchUp 2026", "details": null}, {"start_s": 28886.541, "end_s": 28897.151, "action": "Activated Push/Pull and manipulated the selected building face, then orbited and zoomed around the model to review the resulting geometry from multiple angles.", "intent": "Modify or inspect the building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28897.151, "end_s": 28904.168, "action": "Orbited and zoomed out around the architectural model, changing from a close side view to a wider view of the roof, walls, balconies, and perimeter wall.", "intent": "Review the model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28904.168, "end_s": 28915.668, "action": "Continued orbiting and zooming around the building, moving from an elevated close view of the roof and upper doors to a distant front-right overview.", "intent": "Inspect the overall building form and exterior details.", "app": "SketchUp 2026", "details": null}, {"start_s": 28915.668, "end_s": 28925.622, "action": "Orbited and zoomed toward the lower level, inspecting the tiled courtyard or parking area, perimeter walls, windows, and upper walkway from several angles.", "intent": "Review lower-level exterior and site geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 28925.622, "end_s": 28935.33, "action": "Zoomed and orbited back to a wider building view, then selected the upper building mass so its edges and grips became highlighted in blue.", "intent": "Select and inspect the upper building component.", "app": "SketchUp 2026", "details": null}, {"start_s": 28935.33, "end_s": 28944.282, "action": "Orbit and zoom around the SketchUp house model, then settle on a wider front view showing the roof, balconies, facade, and driveway.", "intent": "Inspect the exterior model from changing viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 28944.282, "end_s": 28954.68, "action": "Orbit the camera around the house and adjust the view to a closer, centered front perspective of the facade and ground-floor parking area.", "intent": "Review the building exterior from the front.", "app": "SketchUp 2026", "details": null}, {"start_s": 28954.68, "end_s": 28964.973, "action": "Continue orbiting and zooming through the model, moving from the house exterior into a close-up view of a small roof or wall opening and its surrounding structure.", "intent": "Inspect a specific architectural detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 28964.973, "end_s": 28974.72, "action": "Manipulate the camera with orbit, zoom, and drag gestures, moving from the roof-level view to a low side perspective beneath the upper floor and balcony.", "intent": "Examine the house structure from multiple exterior angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 28974.72, "end_s": 28984.39, "action": "Orbit and zoom out from the side view, re-centering the complete house in progressively wider front-facing views.", "intent": "Review the overall exterior composition.", "app": "SketchUp 2026", "details": null}, {"start_s": 28984.39, "end_s": 28994.264, "action": "Orbit and zoom around the lower floor and driveway, then pull back to a distant elevated three-quarter view of the complete house.", "intent": "Inspect the lower-level exterior before returning to an overall view.", "app": "SketchUp 2026", "details": null}, {"start_s": 28994.264, "end_s": 29000.491, "action": "Adjusted the SketchUp camera by middle-clicking and scrolling, then changed the view to a more frontal perspective of the house model.", "intent": "Inspect the 3D house model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 29000.491, "end_s": 29020.491, "action": "Remained idle while viewing the frontal perspective of the house model.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 29020.491, "end_s": 29036.927, "action": "Resumed interaction and adjusted the SketchUp orbit view, ending with the house shown smaller and more centered in the workspace.", "intent": "Reposition the camera for model inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 29036.927, "end_s": 29047.394, "action": "Orbited and zoomed the model, selected visible house geometry, and began moving the selected upper structure away from the lower structure.", "intent": "Reposition or edit the house components in 3D.", "app": "SketchUp 2026", "details": null}, {"start_s": 29047.394, "end_s": 29057.903, "action": "Continued orbiting and adjusting the view around the separated structures, bringing the lower structure into a low exterior perspective while keeping the upper structure visible.", "intent": "Inspect the spatial separation and placement of the model components.", "app": "SketchUp 2026", "details": null}, {"start_s": 29057.903, "end_s": 29066.917, "action": "Continued orbiting and scrolling around the separated house components, with the upper structure selected and the move operation still active as the view shifted underneath the models.", "intent": "Inspect or position the selected structure relative to the lower model.", "app": "SketchUp 2026", "details": null}, {"start_s": 29066.917, "end_s": 29076.803, "action": "Adjusted the SketchUp camera around the house model with clicks, scrolls, and brief drags, ending on a closer view of the roof and adjacent building.", "intent": "Inspect the exterior roof and building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 29076.803, "end_s": 29085.94, "action": "Activated Move, selected the roof slab, and dragged it across the scene while scrolling and repositioning the view; the roof remained selected with a displayed movement distance.", "intent": "Move or align the roof slab relative to the building model.", "app": "SketchUp 2026", "details": "The Move tool status and distance field were visible while the roof slab was selected."}, {"start_s": 29085.94, "end_s": 29096.229, "action": "Continued manipulating the selected roof slab, then orbited and zoomed the camera around the model until an elevated view of the interior shell and separate building was shown.", "intent": "Inspect the roof placement and compare the two building components.", "app": "SketchUp 2026", "details": null}, {"start_s": 29096.229, "end_s": 29100.9, "action": "Orbited and zoomed out in SketchUp to frame both the open interior structure and the finished building together.", "intent": "Review the overall model arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 29100.9, "end_s": 29114.316, "action": "Scrolled to adjust the camera to a higher, more top-down view showing the interior floor plan beside the completed building.", "intent": "Review the overall layout and roof relationship.", "app": "SketchUp 2026", "details": null}, {"start_s": 29114.316, "end_s": 29121.063, "action": "Continued zooming and orbiting toward the finished building, ending on a close view of its side door, window, balcony railing, and adjacent interior structure.", "intent": "Inspect exterior facade details.", "app": "SketchUp 2026", "details": null}, {"start_s": 29121.063, "end_s": 29131.087, "action": "Orbited and zoomed around the building exterior, moving from the balcony and door area toward a close view of the window and wall.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 29131.087, "end_s": 29141.174, "action": "Orbited and zoomed out to reveal the building layout, including the roofed structure and the adjacent open-floor-plan building.", "intent": "Review the overall architectural model and relationship between the structures.", "app": "SketchUp 2026", "details": null}, {"start_s": 29141.174, "end_s": 29151.374, "action": "Adjusted the camera around the two building models and zoomed farther out to show the complete open-floor-plan building beside the finished exterior model.", "intent": "Compare the building models from an elevated overview.", "app": "SketchUp 2026", "details": null}, {"start_s": 29151.374, "end_s": 29161.173, "action": "Orbited and zoomed into the finished building, passing over the roof and moving down toward the wood door and adjacent windows.", "intent": "Inspect exterior fa\u00e7ade details from close and elevated views.", "app": "SketchUp 2026", "details": null}, {"start_s": 29161.173, "end_s": 29171.591, "action": "Continued orbiting around the building fa\u00e7ade and roof, typed `t`, and made several clicks while the Tape Measure tool was active; the view ended on the building\u2019s opposite side.", "intent": "Inspect the model and begin or adjust a measurement operation.", "app": "SketchUp 2026", "details": "The Tape Measure tool was active, with measurement readouts visible in the status area."}, {"start_s": 29171.591, "end_s": 29182.809, "action": "Orbited and zoomed around the building exterior, moving from the door and balcony fa\u00e7ade to a wider view of the side wall, roof, and blue windows.", "intent": "Continue reviewing the exterior model from multiple angles.", "app": "SketchUp 2026", "details": "The Tape Measure tool remained active during the camera navigation."}, {"start_s": 29182.809, "end_s": 29192.502, "action": "Orbited and zoomed around the SketchUp model, moving from an overhead view toward closer views of the interior floor plan and adjacent building facade.", "intent": "Inspect the 3D building models from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 29192.502, "end_s": 29203.776, "action": "Continued orbiting and zooming around the two building models, bringing the interior layout, tiled floor, stairs, and roof into closer view.", "intent": "Examine architectural details in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 29203.776, "end_s": 29223.776, "action": "Paused on an overhead view of the interior floor plan and adjacent roof model without recorded interaction.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 29223.776, "end_s": 29236.515, "action": "Zoomed farther out and adjusted the view to show both building models and the surrounding axes.", "intent": "Reframe the overall model scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 29236.515, "end_s": 29246.71, "action": "Switched to the Select tool, clicked and briefly dragged on the model, then orbited and zoomed to a lower exterior perspective showing the building facade and interior structure.", "intent": "Inspect and possibly select model geometry while changing the viewpoint.", "app": "SketchUp 2026", "details": null}, {"start_s": 29246.71, "end_s": 29257.028, "action": "Orbited extensively around the models, briefly viewing them from below, then returned to an elevated perspective and selected the lower edge of the right-hand building, highlighting it in blue.", "intent": "Inspect the building from multiple perspectives and select visible geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 29257.028, "end_s": 29267.796, "action": "Scrolled, clicked, dragged, and typed while working on the selected interior face; changed the view and left the face white with a 5' x 5' dimension entry visible.", "intent": "Modify or position the interior face in the SketchUp model.", "app": "SketchUp", "details": null}, {"start_s": 29267.796, "end_s": 29277.712, "action": "Selected the interior face, clicked repeatedly around its lower edge, adjusted the view, and zoomed out while the face remained highlighted.", "intent": "Inspect or refine the selected face geometry.", "app": "SketchUp", "details": null}, {"start_s": 29277.712, "end_s": 29288.487, "action": "Clicked and navigated around the model, activated the Push/Pull tool, and manipulated the selected roof or floor face; switched to the SketchUp application view as the model changed to an exterior perspective.", "intent": "Push or pull a model face and inspect the resulting geometry.", "app": "SketchUp", "details": null}, {"start_s": 29288.487, "end_s": 29298.214, "action": "Returned to the SketchUp model, orbited and zoomed around the exterior underside, clicked the selected face, and opened the Default Tray Materials panel showing M09_Shadow_Night.", "intent": "Inspect the exterior model and access its material settings.", "app": "SketchUp", "details": "Materials panel is visible with the material name M09_Shadow_Night."}, {"start_s": 29298.214, "end_s": 29308.21, "action": "Orbited and zoomed from a close underside view to a broader top view of the building, with the Default Tray Materials panel remaining open.", "intent": "Review the model from different viewpoints while keeping material controls available.", "app": "SketchUp", "details": "The building roof and surrounding geometry become visible in the final view."}, {"start_s": 29308.21, "end_s": 29316.609, "action": "Orbited and zoomed beneath the building, clicked the underside geometry, and ended with the large underside face selected in blue while the Materials panel remained open.", "intent": "Inspect and select underside building geometry.", "app": "SketchUp", "details": "The final view shows the underside face selected and M09_Shadow_Night in the Materials panel."}, {"start_s": 29316.609, "end_s": 29326.593, "action": "Navigated around the SketchUp model with repeated scrolls, clicks, and a drag, changing from an underside close-up to a wider exterior view of the building models.", "intent": "Inspect different areas and views of the 3D model.", "app": "SketchUp 2026", "details": "The Materials tray remained open with material M09_Shadow_Night visible."}, {"start_s": 29326.593, "end_s": 29337.583, "action": "Continued orbiting and zooming the model with middle-click navigation and scrolls, moving from a close-up selected surface to a distant view showing multiple building components.", "intent": "Adjust the camera to inspect the model at different scales.", "app": "SketchUp 2026", "details": "The view ended with one building component selected in blue."}, {"start_s": 29337.583, "end_s": 29346.588, "action": "Orbited and zoomed repeatedly around the selected building, moving through an underside view and ending at a front-facing exterior view with windows, doors, and balcony railings visible.", "intent": "Review the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "Navigation used repeated middle-click orbit actions and scrolls."}, {"start_s": 29346.588, "end_s": 29356.018, "action": "Rotated and zoomed out from the exterior fa\u00e7ade to an overhead view showing two separate building layouts, then continued toward a closer top-down view of the floor plan.", "intent": "Inspect the relationship and layout of the modeled structures.", "app": "SketchUp 2026", "details": "The right-hand building remained highlighted in blue."}, {"start_s": 29356.018, "end_s": 29366.564, "action": "Continued orbiting and zooming over the selected model, shifting from a top-down view of a small room or tiled area to a broader overhead view of surrounding walls and structures.", "intent": "Examine interior and exterior geometry from above.", "app": "SketchUp 2026", "details": "The Materials tray stayed open and the selected geometry remained outlined in blue."}, {"start_s": 29366.564, "end_s": 29377.293, "action": "Navigated with middle-click orbiting and scrolls across the building layout, then clicked the model and ended on a close-up of a selected enclosed room or wall section.", "intent": "Inspect a specific portion of the model in detail.", "app": "SketchUp 2026", "details": "The final view showed dark gray walls and a light floor with blue selection outlines."}, {"start_s": 29377.293, "end_s": 29387.37, "action": "Orbited and zoomed around the SketchUp house model, moving from an interior courtyard view to an exterior side view.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 29387.37, "end_s": 29397.532, "action": "Continued orbiting and zooming the model, moving through very close views of the roof and walls before pulling back to a distant top view.", "intent": "Review the model geometry from multiple scales and angles.", "app": "SketchUp 2026", "details": "No clearly identifiable geometry edit was visible."}, {"start_s": 29397.532, "end_s": 29410.178, "action": "Opened the File menu area, then continued orbiting and zooming around the house, ending on a pulled-back front perspective.", "intent": "Navigate the SketchUp workspace and inspect the overall model.", "app": "SketchUp 2026", "details": "The model remained in solid-color display with the Materials tray visible."}, {"start_s": 29410.178, "end_s": 29420.426, "action": "Orbited and zoomed toward the front and side of the house, then typed brief input and clicked in the model area, ending on a close translucent view of the balcony and courtyard.", "intent": "Examine the building exterior and balcony details.", "app": "SketchUp 2026", "details": "The Materials tray remained open; the final view shows the courtyard paving and balcony edge."}, {"start_s": 29420.426, "end_s": 29430.269, "action": "Continued navigating the model and selected the long exterior ledge or edge with the Push/Pull tool, showing a distance of 1' 6\", then returned to a courtyard perspective.", "intent": "Inspect or begin modifying the exterior ledge geometry.", "app": "SketchUp 2026", "details": "Push/Pull tool was active during the selected-edge view."}, {"start_s": 29430.269, "end_s": 29440.596, "action": "Orbited and zoomed into the balcony and courtyard edge, then activated the Line tool and placed an endpoint on the edge, with a displayed length of 6\".", "intent": "Draw or measure a line segment along the exterior edge.", "app": "SketchUp 2026", "details": "The final view shows the Line tool active, an On Edge inference, and Length 6\"."}, {"start_s": 29440.596, "end_s": 29450.672, "action": "Navigated around the SketchUp house model with repeated zooming and panning, then changed the view to a closer perspective of the upper exterior.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night selected."}, {"start_s": 29450.672, "end_s": 29460.834, "action": "Orbited and zoomed closely around the lower wall and balcony area, moving the camera across the building exterior.", "intent": "Examine model geometry from close viewpoints.", "app": "SketchUp 2026", "details": "Orbit tool was active; no clear geometry edit was visible."}, {"start_s": 29460.834, "end_s": 29470.734, "action": "Selected and manipulated the view around the underside and terrace edge, then zoomed toward the long upper ledge and adjacent lower facade.", "intent": "Inspect the terrace and facade construction.", "app": "SketchUp 2026", "details": "Push/Pull status text appeared, but no definite geometry change was visible."}, {"start_s": 29470.734, "end_s": 29481.027, "action": "Zoomed and orbited around the upper floor exterior, selected the long perimeter edge or face, and ended on a higher angled view of the roof and balcony strip.", "intent": "Review the upper-floor perimeter and roof form.", "app": "SketchUp 2026", "details": "A blue-highlighted perimeter edge/face was visible during part of the span."}, {"start_s": 29481.027, "end_s": 29491.195, "action": "Adjusted the camera through several zoom and orbit movements, transitioning from a close upper-floor view to a wider overview of the house.", "intent": "Review the overall exterior model after close inspection.", "app": "SketchUp 2026", "details": "The final view showed most of the house and surrounding boundary walls."}, {"start_s": 29491.195, "end_s": 29500.793, "action": "Zoomed and orbited toward the balcony doorway and patterned terrace floor, then continued panning across the terrace edge.", "intent": "Inspect the balcony threshold and terrace surface.", "app": "SketchUp 2026", "details": "Materials tray remained open; no confirmed modeling change was visible."}, {"start_s": 29500.793, "end_s": 29510.638, "action": "Clicked and dragged in the SketchUp model, scrolled and entered brief keystrokes, then selected the Line tool and clicked near the balcony and walkway geometry.", "intent": "Edit or inspect the building model around the balcony and walkway.", "app": "SketchUp 2026", "details": "Materials tray remained open with M09_Shadow_Night visible."}, {"start_s": 29510.638, "end_s": 29520.394, "action": "Clicked and dragged across the model, scrolled and orbited the view, then zoomed toward the long balcony or walkway surface and clicked several times.", "intent": "Navigate and inspect the modeled balcony and adjacent floor area.", "app": "SketchUp 2026", "details": "The view changed from a wider building view to a close-up of the walkway surface."}, {"start_s": 29520.394, "end_s": 29530.49, "action": "Selected an edge or face, scrolled extensively, orbited the model, and navigated to a wider front view showing the building facade, balconies, and tiled ground.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": "The selected walkway edge was highlighted blue before the view widened."}, {"start_s": 29530.49, "end_s": 29540.592, "action": "Orbited and scrolled around the model, moving from a close-up of the balcony structure to a broader view of the upper facade, balcony doors, windows, and front wall.", "intent": "Review the exterior geometry from multiple angles.", "app": "SketchUp 2026", "details": "Orbit navigation was active during the span."}, {"start_s": 29540.592, "end_s": 29550.539, "action": "Orbited and scrolled the SketchUp camera, hid or resized the application window briefly, then continued navigating and zoomed out to an overall view of the building.", "intent": "Inspect the complete exterior model and its surrounding structure.", "app": "SketchUp 2026", "details": "The final view showed the full building mass and surrounding walls; the Materials tray was no longer visible."}, {"start_s": 29550.539, "end_s": 29560.65, "action": "Scrolled and orbited around the building, clicked and dragged on the lower facade, switched to the Line tool, and positioned the cursor to set a first endpoint; the Measurements field showed 6 inches.", "intent": "Begin drawing or measuring a line on the building facade.", "app": "SketchUp 2026", "details": "The final screen showed the Line tool active with the first endpoint positioned on the facade."}, {"start_s": 29560.65, "end_s": 29570.86, "action": "Scrolled and adjusted the SketchUp view around the upper balcony slab, then used the Push/Pull tool on the horizontal face, leaving a distance value visible.", "intent": "Modify the balcony or terrace slab geometry.", "app": "SketchUp 2026", "details": "The view remained focused on the building\u2019s upper-level balcony area."}, {"start_s": 29570.86, "end_s": 29580.613, "action": "Orbiting and zooming changed the view from the balcony close-up to a wider front elevation, then selected the long balcony slab edge or face.", "intent": "Inspect and select the balcony slab from different viewpoints.", "app": "SketchUp 2026", "details": "The model was shown from a frontal and then angled perspective."}, {"start_s": 29580.613, "end_s": 29589.854, "action": "Orbiting moved around the building exterior from the front toward the side and underside, with repeated middle-button navigation and a final selection near the lower balcony edge.", "intent": "Review the exterior slab and balcony geometry from multiple angles.", "app": "SketchUp 2026", "details": "The camera ended beneath the projecting upper floor."}, {"start_s": 29589.854, "end_s": 29599.757, "action": "Continued orbiting and scrolling beneath the projecting floor, then clicked the underside perimeter so the slab edge became highlighted in blue.", "intent": "Inspect and select the underside edge of the projecting slab.", "app": "SketchUp 2026", "details": "The view stayed underneath the upper-level overhang."}, {"start_s": 29599.757, "end_s": 29609.286, "action": "Navigated around the selected overhang and changed the view toward the side balcony, then activated a guide-related tool and positioned a guide or inference marker near the slab corner.", "intent": "Place or inspect construction guidance around the balcony slab.", "app": "SketchUp 2026", "details": "The final view showed the side fa\u00e7ade, balconies, and a guide marker at the overhang."}, {"start_s": 29609.286, "end_s": 29619.158, "action": "Orbiting and scrolling pulled back to a wider exterior view, then moved underneath the projecting floor to inspect its underside and adjacent lower-level doors and walls.", "intent": "Review the building exterior and overhang from a wider set of viewpoints.", "app": "SketchUp 2026", "details": "No clear geometry change was visible; activity primarily navigated the 3D model."}, {"start_s": 29619.158, "end_s": 29628.93, "action": "Navigated around the SketchUp building model with repeated middle-button orbiting and scroll gestures, moving from a close balcony and facade view to another close exterior view.", "intent": "Inspect the exterior model from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 29628.93, "end_s": 29639.474, "action": "Selected and dragged near the upper facade edge, entered a few characters, and continued clicking and scrolling around the balcony slab and windows while changing the camera view.", "intent": "Inspect or adjust geometry along the facade and balcony edge.", "app": "SketchUp 2026", "details": "The visible model remained focused on a balcony slab above ground-floor windows."}, {"start_s": 29639.474, "end_s": 29649.825, "action": "Orbited and zoomed the model repeatedly, then clicked and dragged around the building corner and side facade, ending on a wider angled view of the exterior.", "intent": "Review the building exterior and reposition the camera.", "app": "SketchUp 2026", "details": "The model view progressed from a close slab edge to a broader view of balconies, doors, windows, and perimeter walls."}, {"start_s": 29649.825, "end_s": 29658.657, "action": "Scrolled and orbited around the model, moving from the side facade to an elevated front view that showed the roof, front doors, balconies, and paved entry area.", "intent": "Examine the overall building form from above and from the front.", "app": "SketchUp 2026", "details": null}, {"start_s": 29658.657, "end_s": 29668.107, "action": "Zoomed and orbited around the building, briefly selecting the model, then moved into a very close view of an interior or roof opening before returning toward an elevated exterior view.", "intent": "Inspect the model and its roof or opening geometry from multiple distances.", "app": "SketchUp 2026", "details": "The model was highlighted blue during part of the inspection; the later close-up showed a small enclosed opening."}, {"start_s": 29668.107, "end_s": 29677.923, "action": "Orbited and zoomed out from the close-up opening to an elevated overview, then rotated back toward the front facade and roof.", "intent": "Continue reviewing the building model from overhead and front perspectives.", "app": "SketchUp 2026", "details": "The final view showed the roof opening, front doors, balconies, perimeter wall, and paved entry area."}, {"start_s": 29677.923, "end_s": 29687.741, "action": "Orbited and zoomed around the selected building model, then clicked to adjust the 3D view and left the camera close to the front facade.", "intent": "Inspect the selected building geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 29687.741, "end_s": 29697.095, "action": "Zoomed out and orbited to reveal two building models, then adjusted the view and selection state while moving around the scene.", "intent": "Compare the building models in the 3D workspace.", "app": "SketchUp 2026", "details": null}, {"start_s": 29697.095, "end_s": 29707.292, "action": "Continued orbiting and zooming around the selected building, moving from a close side view to a distant overhead view of both models.", "intent": "Review the selected model\u2019s placement and overall form.", "app": "SketchUp 2026", "details": null}, {"start_s": 29707.292, "end_s": 29717.375, "action": "Orbited and zoomed farther out around the scene, showing both building models from wide elevated angles and ending with an overhead comparison view.", "intent": "Inspect the relative layout of the two building models.", "app": "SketchUp 2026", "details": null}, {"start_s": 29717.375, "end_s": 29727.287, "action": "Orbited and zoomed toward the rooftops, then clicked the right-hand building and left it selected in blue outline.", "intent": "Select and inspect the second building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 29727.287, "end_s": 29737.67, "action": "Zoomed and orbited into a close side view of the selected building, then clicked and initiated a copy operation on the selected geometry.", "intent": "Copy or reposition selected building geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 29737.67, "end_s": 29749.832, "action": "Orbited and zoomed around the selected upper building model, inspecting its balconies, roofline, and surrounding geometry.", "intent": "Inspect the selected building component from multiple viewpoints.", "app": "SketchUp", "details": "The upper structure remained highlighted in blue while the camera view changed."}, {"start_s": 29749.832, "end_s": 29760.496, "action": "Changed the SketchUp view and selection state, then zoomed far out to reveal multiple building groups and a separate roof-like component in the scene.", "intent": "Reframe the model and inspect its spatial arrangement.", "app": "SketchUp", "details": "The view transitioned from a close exterior view to a distant scene overview; the window was resized at the end."}, {"start_s": 29760.496, "end_s": 29771.207, "action": "Reactivated and resized the SketchUp window, then navigated the distant model view with zooming and clicks, leaving several building components visible.", "intent": "Continue inspecting the overall model layout.", "app": "SketchUp", "details": "The application was briefly hidden and shown again; the model appeared unselected in the later view."}, {"start_s": 29771.207, "end_s": 29779.985, "action": "Zoomed and orbited around the building scene, clicking and dragging near the models and ending with a selected upper structure partially visible at the right.", "intent": "Inspect the relationship between the building components and the selected structure.", "app": "SketchUp", "details": "The camera moved from a distant multi-building view to close exterior geometry."}, {"start_s": 29779.985, "end_s": 29789.008, "action": "Continued orbiting and zooming around the building exterior, moving from a front-corner view toward the side and rear edges while the upper structure stayed highlighted.", "intent": "Examine the building sides and selected upper geometry.", "app": "SketchUp", "details": "The final view showed a close side/rear area with blue-highlighted geometry near the upper right."}, {"start_s": 29789.008, "end_s": 29799.599, "action": "Orbited and zoomed around the building models, briefly viewing two structures and a detached roof-like piece before moving into a close-up of the selected upper structure.", "intent": "Inspect the model components from additional exterior viewpoints.", "app": "SketchUp", "details": "The final frame showed translucent blue-selected geometry along the building edge."}, {"start_s": 29799.599, "end_s": 29809.696, "action": "Navigated the SketchUp camera from an empty workspace toward the building model, using repeated view adjustments and zooming until the building corner came into view.", "intent": "Adjust the 3D view to locate and inspect the building model.", "app": "SketchUp 2026", "details": "The Move tool remained active while the view changed from empty space to a close building corner."}, {"start_s": 29809.696, "end_s": 29818.092, "action": "Continued orbiting and zooming around the building, then pulled back to show the complete small multi-story model and nearby geometry.", "intent": "Review the overall building model from different distances and angles.", "app": "SketchUp 2026", "details": "The view ended with the building shown small in the workspace."}, {"start_s": 29818.092, "end_s": 29826.492, "action": "Adjusted the camera to a front-facing view of the building, briefly framing the balconies, doors, windows, and tiled entry area, then zoomed back out.", "intent": "Inspect the building facade and front entry arrangement.", "app": "SketchUp 2026", "details": "The Select tool was active and no geometry was visibly edited."}, {"start_s": 29826.492, "end_s": 29840.822, "action": "Orbit-zoomed around the building from a distant front view to a closer elevated view, ending over the roof and upper facade.", "intent": "Examine the building exterior and roof from multiple 3D viewpoints.", "app": "SketchUp 2026", "details": "The Orbit tool was active near the end, with the roof and roof opening prominently visible."}, {"start_s": 29840.822, "end_s": 29850.843, "action": "Repositioned the camera around the model, alternating between distant and closer views of the front facade, balconies, and tiled entry area.", "intent": "Continue visual inspection of the building exterior and entry details.", "app": "SketchUp 2026", "details": "No modeling changes were visibly made."}, {"start_s": 29850.843, "end_s": 29860.641, "action": "Zoomed and orbited into the front entry area to inspect the patterned tiled surface beneath the balconies, then pulled back to a wider frontal view of the building.", "intent": "Inspect the front ground surface and its relationship to the building facade.", "app": "SketchUp 2026", "details": "The final view showed both balconies, doors, facade, perimeter walls, and the tiled entry area."}, {"start_s": 29860.641, "end_s": 29870.656, "action": "Orbit and zoom the SketchUp camera around the building model, moving from an angled exterior view to a distant front view.", "intent": "Inspect the building from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 29870.656, "end_s": 29880.664, "action": "Zoom and orbit toward the building\u2019s front facade, bringing the roof, balconies, doors, and windows into a close view.", "intent": "Examine the front exterior details.", "app": "SketchUp", "details": null}, {"start_s": 29880.664, "end_s": 29890.332, "action": "Orbit and zoom around the upper front of the building, alternating between wider and closer views of the roof and facade.", "intent": "Continue inspecting the building geometry.", "app": "SketchUp", "details": null}, {"start_s": 29890.332, "end_s": 29900.295, "action": "Select the upper building section, activate a transform/copy operation, and zoom out to show the selected section separated from the main model.", "intent": "Position or duplicate the selected building component.", "app": "SketchUp", "details": "The selected upper section is outlined in blue."}, {"start_s": 29900.295, "end_s": 29910.742, "action": "Orbit and zoom around the separated building components, then begin manipulating the selected section while keeping it highlighted.", "intent": "Adjust or inspect the placement of the selected component.", "app": "SketchUp", "details": "The Move/Copy tool remains active and the selected geometry is outlined in blue."}, {"start_s": 29910.742, "end_s": 29920.246, "action": "Orbit and zoom into the building\u2019s upper side and balcony area, continuing the active move/copy manipulation of selected geometry.", "intent": "Refine the selected component\u2019s position relative to the building.", "app": "SketchUp", "details": "The active transform shows a distance readout while the selected geometry remains highlighted."}, {"start_s": 29920.246, "end_s": 29930.175, "action": "Orbited and zoomed around the front of the multi-story building model, moving from an upper fa\u00e7ade view to a closer lower courtyard view.", "intent": "Inspect the building exterior from different camera distances.", "app": "SketchUp 2026", "details": null}, {"start_s": 29930.175, "end_s": 29940.586, "action": "Zoomed out from the front fa\u00e7ade and orbited to a distant overall view, revealing the building and another separate model in the workspace.", "intent": "Review the model's overall placement and surrounding geometry.", "app": "SketchUp 2026", "details": "The view changed from a close front elevation to a wide scene view."}, {"start_s": 29940.586, "end_s": 29950.051, "action": "Orbited around the building from the front toward the opposite fa\u00e7ade, bringing the blue-glazed central balconies into view and adjusting the camera to a more centered elevation.", "intent": "Inspect another exterior side of the building.", "app": "SketchUp 2026", "details": null}, {"start_s": 29950.051, "end_s": 29959.1, "action": "Zoomed far out and then back in while orbiting around the building, transitioning from a distant scene view to a close view of the front balconies, doors, and courtyard.", "intent": "Compare the building exterior at different scales and angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 29959.1, "end_s": 29969.464, "action": "Orbited around the building's side and rear portions while zooming out, ending with a wider three-quarter view that included the separate nearby model.", "intent": "Inspect the building's side and rear exterior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 29969.464, "end_s": 29979.554, "action": "Continued orbiting and zooming around the building, moving from a side courtyard view to close views of the perimeter wall, doors, balconies, and lower fa\u00e7ade.", "intent": "Examine exterior details along the building perimeter.", "app": "SketchUp 2026", "details": null}, {"start_s": 29979.554, "end_s": 29988.28, "action": "Orbited and zoomed around the SketchUp apartment model, moving from an exterior overview to a close view beneath the building.", "intent": "Inspect the building model from different angles.", "app": "SketchUp", "details": null}, {"start_s": 29988.28, "end_s": 29998.25, "action": "Continued orbiting and zooming around the apartment facade and courtyard, ending on a higher angled view of the balconies and boundary wall.", "intent": "Review exterior architectural details.", "app": "SketchUp", "details": null}, {"start_s": 29998.25, "end_s": 30008.412, "action": "Repositioned the camera around the building with orbit and zoom actions, then activated the Tape Measure tool and began placing a measurement guide along the front boundary.", "intent": "Measure or lay out a reference on the model.", "app": "SketchUp", "details": "A guide line and measurement indicator appeared along the boundary wall."}, {"start_s": 30008.412, "end_s": 30023.168, "action": "Continued positioning the active measurement guide near the front wall, used a keyboard shortcut, and made minor view adjustments.", "intent": "Adjust or cancel the measurement guide placement.", "app": "SketchUp", "details": "The Tape Measure tool remained active with the guide endpoint visible."}, {"start_s": 30023.168, "end_s": 30035.903, "action": "Clicked and zoomed the view to frame the front courtyard wall, then pressed Escape while the measurement guide remained visible.", "intent": "Inspect the boundary wall and exit the current tool operation.", "app": "SketchUp", "details": "The model stayed in an angled exterior view with a red guide line across the wall."}, {"start_s": 30035.903, "end_s": 30040.304, "action": "Orbited and zoomed around the building perimeter, moving from the courtyard corner to a side view of the long boundary wall while keeping the guide visible.", "intent": "Continue inspecting the exterior boundary and building facade.", "app": "SketchUp", "details": "The final view shows the long wall, courtyard, balconies, and a green guide line."}, {"start_s": 30040.304, "end_s": 30052.611, "action": "Scrolled repeatedly while viewing the building model and left a guide measurement visible along the front wall; entered a space.", "intent": "Inspect the modeled building and its measured edge.", "app": "SketchUp 2026", "details": "The view showed a close front-corner perspective with a guide labeled approximately 60' 6 5/8\"."}, {"start_s": 30052.611, "end_s": 30062.746, "action": "Used repeated middle-button clicks and scrolling to orbit and zoom around the building, transitioning from a close corner view to a centered front elevation.", "intent": "Reposition the 3D view to inspect the building facade.", "app": "SketchUp 2026", "details": "The final view centered the three-story front facade, balconies, doors, windows, and paved entry area."}, {"start_s": 30062.746, "end_s": 30076.46, "action": "Orbited and zoomed the model with repeated middle-button navigation, moving from the front elevation to elevated oblique views of the roof and side facade.", "intent": "Inspect additional exterior sides and the roof geometry.", "app": "SketchUp 2026", "details": "The view successively showed the roof opening, front balconies, and the building's right-side balconies."}, {"start_s": 30076.46, "end_s": 30086.75, "action": "Clicked and navigated with the middle mouse button to adjust the orbit and zoom, keeping the upper front and roof in view.", "intent": "Refine the exterior inspection angle.", "app": "SketchUp 2026", "details": "The building remained in an elevated front-facing perspective with the roof and three levels visible."}, {"start_s": 30086.75, "end_s": 30096.812, "action": "Continued orbiting and zooming around the model with many middle-button actions, moving from the front-right corner to the rear/side facade with blue windows and balconies.", "intent": "Inspect the building's opposite exterior facade.", "app": "SketchUp 2026", "details": "The later view showed the rear-side wall, stacked blue-glazed balcony windows, perimeter wall, and walkway."}, {"start_s": 30096.812, "end_s": 30102.733, "action": "Zoomed in closely on a small wall window or ventilation assembly and adjusted the view to examine its slatted grille, fan-like grille, and lower panel.", "intent": "Inspect the detailed window or ventilation component.", "app": "SketchUp 2026", "details": "The final close-up isolated the rectangular assembly on the white wall."}, {"start_s": 30102.733, "end_s": 30112.559, "action": "Scrolled through the SketchUp building model, then orbited to a wider exterior view with the middle mouse button.", "intent": "Inspect the building from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 30112.559, "end_s": 30124.478, "action": "Orbited and zoomed around the building exterior, moving from an upper close view to a wider perspective showing multiple fa\u00e7ades and roof areas.", "intent": "Review exterior model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 30124.478, "end_s": 30140.373, "action": "Orbited and zoomed toward the rear fa\u00e7ade, ending on a close view of balconies, doors, windows, and the tiled ground area.", "intent": "Inspect the rear elevation and entrance area.", "app": "SketchUp 2026", "details": null}, {"start_s": 30140.373, "end_s": 30149.696, "action": "Navigated through the model with repeated middle-button orbiting and scrolling, moving from the tiled entrance area to a centered front view of the building.", "intent": "Examine the entrance and front fa\u00e7ade from alternate angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30149.696, "end_s": 30161.275, "action": "Scrolled and orbited around the lower front fa\u00e7ade and boundary wall, then switched to left-click interactions that left the model in a translucent selected state.", "intent": "Inspect and select geometry near the boundary wall.", "app": "SketchUp 2026", "details": null}, {"start_s": 30161.275, "end_s": 30171.983, "action": "Continued interacting with the selected boundary wall, typed \u201cf,\u201d clicked repeatedly, and scrolled; the wall remained highlighted before the view showed an offset/measurement-style state.", "intent": "Modify or inspect the selected wall geometry.", "app": "SketchUp 2026", "details": "The final view shows the wall highlighted with a measurement/offset tool active."}, {"start_s": 30171.983, "end_s": 30181.795, "action": "Entered 1' and confirmed it, then navigated around the selected long wall face and typed partial push/pull inputs while clicking the face.", "intent": "Adjust the selected wall face using a measured SketchUp operation.", "app": "SketchUp 2026", "details": "Selected long rectangular face remained visible; the Distance field showed 1' before the tool state changed."}, {"start_s": 30181.795, "end_s": 30191.832, "action": "Clicked and navigated across the selected face, entered a push/pull value of 4\", and confirmed it, leaving the long face visibly modified.", "intent": "Push or pull the long wall face by a specified distance.", "app": "SketchUp 2026", "details": "The face preview showed a 9\" distance during the operation before the final 4\" entry."}, {"start_s": 30191.832, "end_s": 30201.552, "action": "Navigated with repeated orbit and scroll gestures around the building, changing from a close wall view to a wider front view of the building and boundary wall.", "intent": "Inspect the model from different viewpoints after modifying the wall.", "app": "SketchUp 2026", "details": "No clear geometry edit was completed during the navigation sequence."}, {"start_s": 30201.552, "end_s": 30211.737, "action": "Orbited and zoomed around the front boundary wall and lower building fa\u00e7ade, moving from a front view to a close-up of the wall corner.", "intent": "Review the boundary wall geometry from multiple angles.", "app": "SketchUp 2026", "details": "No definite object modification was visible; the sequence primarily changed the camera view."}, {"start_s": 30211.737, "end_s": 30222.035, "action": "Zoomed and orbited outward around the building, briefly used undo-like keyboard inputs, and ended on an angled view showing the building fa\u00e7ade, balconies, and boundary wall.", "intent": "Inspect the overall model and revise or review recent view or modeling actions.", "app": "SketchUp 2026", "details": "Several Ctrl+Z-like inputs were recorded, but the resulting modeling change is not clearly identifiable."}, {"start_s": 30222.035, "end_s": 30231.893, "action": "Dragged and orbited upward around the building, then zoomed and rotated to inspect the upper fa\u00e7ades, roof, balconies, and perimeter wall from elevated exterior views.", "intent": "Inspect the completed building model from elevated exterior viewpoints.", "app": "SketchUp 2026", "details": "The final view showed the roof, multiple balconies, fa\u00e7ade openings, and the surrounding boundary wall."}, {"start_s": 30231.893, "end_s": 30242.862, "action": "Orbited and zoomed around the upper exterior of the apartment model, shifting from a close roof view to a more frontal fa\u00e7ade view.", "intent": "Inspect the building\u2019s roof and upper fa\u00e7ade from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30242.862, "end_s": 30253.868, "action": "Orbited and zoomed out from the close fa\u00e7ade view to reveal the full multi-story building and a separate low building to the right.", "intent": "Review the overall arrangement and exterior form of the modeled buildings.", "app": "SketchUp 2026", "details": null}, {"start_s": 30253.868, "end_s": 30263.794, "action": "Continued orbiting the model to view the apartment building from a more centered rear or side angle, keeping the separate building visible.", "intent": "Examine another exterior elevation of the building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 30263.794, "end_s": 30273.772, "action": "Orbited and zoomed around the apartment building, moving from a close front view to a wider elevated three-quarter view showing the roof, balconies, courtyard, and adjacent building.", "intent": "Inspect the exterior details and overall massing from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 30273.772, "end_s": 30279.752, "action": "Continued orbiting and zooming out to a wider three-quarter view of the apartment building, courtyard, and separate low structure.", "intent": "Review the model\u2019s exterior composition from a broader angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 30279.752, "end_s": 30299.752, "action": "Remained idle on a stable SketchUp view of the apartment building and adjacent low structure.", "intent": "Pause while reviewing the displayed model.", "app": "SketchUp 2026", "details": "No recorded interaction events."}, {"start_s": 30299.752, "end_s": 30311.184, "action": "Scrolled around the SketchUp model view, keeping the multi-story building and adjacent low structure visible.", "intent": "Inspect the 3D building model from the current view.", "app": "SketchUp 2026", "details": null}, {"start_s": 30311.184, "end_s": 30331.184, "action": "Remained idle while viewing the SketchUp model of the multi-story building and adjacent structure.", "intent": "Review the model view without making changes.", "app": "SketchUp 2026", "details": null}, {"start_s": 30331.184, "end_s": 30350.87, "action": "Scrolled to zoom in toward the building facade, bringing the balconies, doors, windows, and entrance paving into close view.", "intent": "Inspect facade details of the 3D model.", "app": "SketchUp 2026", "details": "The viewport changed from a wider building view to a close-up facade view."}, {"start_s": 30350.87, "end_s": 30367.208, "action": "Scrolled further around the facade and middle-clicked to orbit the model, changing from the close-up corner to a higher front-side view.", "intent": "Examine the building from another angle and scale.", "app": "SketchUp 2026", "details": "The Orbit tool became active after the middle-click, and the model view shifted substantially."}, {"start_s": 30367.208, "end_s": 30373.362, "action": "Middle-clicked and scrolled to orbit and zoom around the upper facade, then pulled back to show most of the building and roof.", "intent": "Inspect the upper floors and roof from a broader perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 30373.362, "end_s": 30388.379, "action": "Scrolled and middle-clicked to adjust the camera, settling on a front-side view of the full multi-story building with balconies, entrance paving, and the adjacent low structure.", "intent": "Review the overall model from a clear exterior angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 30388.379, "end_s": 30406.994, "action": "Scrolled through the SketchUp model and zoomed in toward the front of the multi-story building, ending on a closer view of its balconies, doors, and windows.", "intent": "Inspect the building facade at different zoom levels.", "app": "SketchUp 2026", "details": null}, {"start_s": 30406.994, "end_s": 30426.994, "action": "Adjusted the 3D view with a middle-mouse interaction and scroll, rotating or repositioning the camera to show more of the building's left side and front.", "intent": "Review another exterior angle of the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 30426.994, "end_s": 30446.994, "action": "Scrolled repeatedly to adjust the camera, alternating between wider and closer views of the three-story building and its surrounding model elements.", "intent": "Continue inspecting the exterior model from changing viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 30446.994, "end_s": 30458.228, "action": "Used middle-mouse clicks and repeated scrolling to reposition and zoom the camera, moving from a wider building view to a closer front-facade view.", "intent": "Refine the viewpoint for facade inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 30458.228, "end_s": 30469.034, "action": "Scrolled and used middle-mouse interactions to zoom tightly onto the facade, bringing a small wall vent or fixture near a door and window into close view.", "intent": "Inspect a specific facade detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 30469.034, "end_s": 30481.669, "action": "Scrolled to reposition the close-up view, shifting the visible area to another wall vent between the balconies and doors.", "intent": "Continue examining facade fixtures in close detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 30481.669, "end_s": 30501.669, "action": "Scrolled the SketchUp viewport slightly while keeping the multi-story building model in view.", "intent": "Adjust the model view for inspection.", "app": "SketchUp", "details": null}, {"start_s": 30501.669, "end_s": 30513.14, "action": "Scrolled the viewport again, enlarging the front-facing building model on screen.", "intent": "Zoom in to inspect the building facade.", "app": "SketchUp", "details": null}, {"start_s": 30513.14, "end_s": 30533.14, "action": "Remained idle while viewing the enlarged building model.", "intent": "Review the current model view.", "app": "SketchUp", "details": null}, {"start_s": 30533.14, "end_s": 30547.025, "action": "Resumed interaction and scrolled to zoom closer toward the upper floors and roof of the building.", "intent": "Inspect the upper exterior details.", "app": "SketchUp", "details": "System state indicators briefly changed during the interval."}, {"start_s": 30547.025, "end_s": 30557.107, "action": "Scrolled and used middle-click navigation, shifting from the building facade to a close-up view of the roof and an opening in the model.", "intent": "Navigate around the model to inspect roof geometry.", "app": "SketchUp", "details": "The final view shows a large roof surface with a rectangular opening and adjacent structure."}, {"start_s": 30557.107, "end_s": 30567.912, "action": "Continued middle-click orbiting and scrolling around the model, changing the view to a close-up of the roof opening and surrounding walls.", "intent": "Examine the roof opening from different angles.", "app": "SketchUp", "details": "The Orbit tool was active, and the building facade moved mostly out of view."}, {"start_s": 30567.912, "end_s": 30578.787, "action": "Clicked repeatedly around the model, switched to an offset-related tool, entered a partial shortcut, and left the tool active with the model unchanged.", "intent": "Attempt to activate and use a SketchUp editing tool on the model.", "app": "SketchUp 2026", "details": "The status bar ended with an offset measurement prompt."}, {"start_s": 30578.787, "end_s": 30591.496, "action": "Zoomed in and clicked the model several times, then entered a shortcut; SketchUp displayed a warning that a single face or connected coplanar edges must first be selected.", "intent": "Attempt to offset a model face or edge selection.", "app": "SketchUp 2026", "details": "Visible warning: \u201cYou must first select a single face or two or more simply connected, coplanar edges.\u201d"}, {"start_s": 30591.496, "end_s": 30602.509, "action": "Scrolled and clicked the model, selected the right outer edge, and switched to the Move tool, leaving the edge highlighted with a move/copy prompt.", "intent": "Prepare to reposition or copy the selected model edge.", "app": "SketchUp 2026", "details": "The selected edge was highlighted blue and the Move tool prompt was active."}, {"start_s": 30602.509, "end_s": 30612.298, "action": "Started moving the selected geometry, clicked near the upper model area, entered 9 inches, and confirmed; the view and geometry shifted while a separate line remained visible to the right.", "intent": "Move the selected model geometry by a precise 9-inch distance.", "app": "SketchUp 2026", "details": "The measurement field visibly contained 9 inches during the move."}, {"start_s": 30612.298, "end_s": 30622.192, "action": "Selected lower model geometry, entered 9 inches, and confirmed another move; zooming and panning repositioned the model while the move operation remained active.", "intent": "Apply a second precise 9-inch translation to selected geometry.", "app": "SketchUp 2026", "details": "The model became smaller and shifted within the viewport; a blue move guide was visible."}, {"start_s": 30622.192, "end_s": 30632.099, "action": "Selected the upper-left area, dragged to begin copying or moving geometry, entered 9 inches, and confirmed; the upper edge ended highlighted blue in the repositioned model.", "intent": "Copy or move the selected upper model geometry by a precise distance.", "app": "SketchUp 2026", "details": "The status bar indicated copying or moving items, and the measurement field showed approximately 3 3/16 inches at one point before the final selection state."}, {"start_s": 30632.099, "end_s": 30641.495, "action": "Entered a 9-inch distance and confirmed it, then zoomed or scrolled around the selected rectangular opening while continuing the move operation.", "intent": "Adjust the position or size of the selected geometry using a precise distance.", "app": "SketchUp 2026", "details": "The model showed a rectangular recessed opening and an active move-distance field."}, {"start_s": 30641.495, "end_s": 30651.609, "action": "Clicked around the opening and placed several guide points, using a 9-inch length and snapping to visible edges.", "intent": "Create construction guides to align the opening and surrounding geometry.", "app": "SketchUp 2026", "details": "Guides appeared as dashed lines across the model; the final tooltip indicated an edge reference."}, {"start_s": 30651.609, "end_s": 30661.896, "action": "Exited the guide operation, selected surrounding faces and edges, and adjusted the selection while zooming or panning the view.", "intent": "Select and inspect geometry around the opening for further editing.", "app": "SketchUp 2026", "details": "The surrounding floor-like geometry became highlighted with blue outlines and stippled selection shading."}, {"start_s": 30661.896, "end_s": 30672.19, "action": "Clicked multiple faces and edges to refine the selection, briefly dragged on the model, and left the surrounding surface selected.", "intent": "Refine the set of faces or edges to be edited around the opening.", "app": "SketchUp 2026", "details": "The broad surrounding surface displayed SketchUp selection shading while the recessed opening remained visible."}, {"start_s": 30672.19, "end_s": 30682.112, "action": "Selected the surrounding face and used Push/Pull to raise it around the opening, entering a distance and changing the view as the geometry became a raised box-like form.", "intent": "Extrude the selected face to create or increase the wall height around the opening.", "app": "SketchUp 2026", "details": "The status bar showed Push/Pull, and the result was a tall rectangular enclosure with an open top."}, {"start_s": 30682.112, "end_s": 30691.277, "action": "Orbited and zoomed around the raised enclosure to inspect its walls and open top from several angles.", "intent": "Review the completed extrusion and verify the resulting 3D form.", "app": "SketchUp 2026", "details": "The final views showed a freestanding rectangular box with a recessed/open interior."}, {"start_s": 30691.277, "end_s": 30701.603, "action": "Entered 10 and navigated the SketchUp camera around the building model using orbiting and zooming, ending on an exterior view of the building and nearby roof pieces.", "intent": "Inspect the 3D building model from different exterior angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30701.603, "end_s": 30712.239, "action": "Orbited and zoomed around the model, moving from a broad building view toward the rooftop structures and detached roof elements.", "intent": "Continue inspecting rooftop geometry and model positioning.", "app": "SketchUp 2026", "details": null}, {"start_s": 30712.239, "end_s": 30721.634, "action": "Zoomed and orbited into the rooftop opening, bringing the square shaft and its recessed interior into close view.", "intent": "Examine the interior geometry of the rooftop opening.", "app": "SketchUp 2026", "details": null}, {"start_s": 30721.634, "end_s": 30731.585, "action": "Adjusted the camera around the rooftop shaft and zoomed out slightly; typed r and interacted with the shaft area, leaving the opening visibly covered by a flat top face.", "intent": "Inspect and possibly modify the rooftop shaft geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 30731.585, "end_s": 30742.489, "action": "Clicked and orbited around the rooftop shaft, zooming in toward its top and side faces while continuing to inspect the surrounding roof plane.", "intent": "Review the shaft and roof construction from close angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30742.489, "end_s": 30752.731, "action": "Selected and dragged around the rooftop shaft and roof edges while orbiting and zooming, then settled on a wider perspective showing the shaft, roof, and adjacent building.", "intent": "Refine or inspect the rooftop shaft placement and surrounding model.", "app": "SketchUp 2026", "details": null}, {"start_s": 30752.731, "end_s": 30763.161, "action": "Orbited and zoomed around the rooftop model, moving from a close view of the rooftop structure to a wider frontal view.", "intent": "Inspect the rooftop structure from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30763.161, "end_s": 30772.295, "action": "Orbited and zoomed toward the tall rooftop structure until its open lower section filled the view.", "intent": "Examine the structure\u2019s geometry more closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 30772.295, "end_s": 30783.171, "action": "Adjusted the camera around the rooftop, opened the Edit menu, hovered over Purge Unused Assets, and then returned to the model view.", "intent": "Review model-editing options and continue inspecting the model.", "app": "SketchUp 2026", "details": "The Edit menu visibly showed Purge Unused Assets."}, {"start_s": 30783.171, "end_s": 30793.369, "action": "Selected the top face of the rooftop structure and used Push/Pull, entering a distance while raising the face and changing the top geometry.", "intent": "Modify the height or form of the rooftop structure.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance field showed approximately 4 3/8 inches."}, {"start_s": 30793.369, "end_s": 30804.133, "action": "Continued the Push/Pull operation on the selected top face, entered 3 feet, and confirmed the value, leaving a raised rectangular top element above the opening.", "intent": "Set a larger extrusion height for the rooftop component.", "app": "SketchUp 2026", "details": "The distance field visibly showed 3 feet after confirmation."}, {"start_s": 30804.133, "end_s": 30814.37, "action": "Selected model geometry and orbited and zoomed around the edited rooftop structure, ending with the raised rectangular top and open enclosure visible from above.", "intent": "Inspect the completed geometric modification from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 30814.37, "end_s": 30823.777, "action": "Clicked and scrolled in the SketchUp model, changing the view from a close-up of the open rectangular structure to a broader top view.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2026", "details": null}, {"start_s": 30823.777, "end_s": 30833.779, "action": "Activated orbit navigation and dragged/rotated the camera, zooming out to reveal the roof-like surface, the open rectangular structure, and another building section.", "intent": "Inspect the structure from different angles and distances.", "app": "SketchUp 2026", "details": null}, {"start_s": 30833.779, "end_s": 30843.317, "action": "Continued orbiting and zooming around the open structure, then clicked its geometry so the edges became highlighted blue.", "intent": "Examine and select the structure for editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 30843.317, "end_s": 30853.782, "action": "Selected the Line tool and began drawing on the structure, entering a length value while the camera shifted; then switched to the Push/Pull tool and positioned it over the front face.", "intent": "Create or modify geometry on the structure.", "app": "SketchUp 2026", "details": null}, {"start_s": 30853.782, "end_s": 30864.215, "action": "Drew and selected edges around the structure while adjusting the view, then activated Move and positioned the cursor at the lower-right corner for a transformation.", "intent": "Continue editing and repositioning the structure geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 30864.215, "end_s": 30873.868, "action": "Clicked and adjusted the model while zooming or orbiting, leaving a vertical edge highlighted blue on the front-left side of the open structure.", "intent": "Inspect and refine the edited geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 30873.868, "end_s": 30884.325, "action": "Adjusted the SketchUp view around the rooftop box, orbiting and zooming from the wider building context to a close-up of the opening.", "intent": "Inspect the modeled rooftop opening from different angles.", "app": "SketchUp", "details": null}, {"start_s": 30884.325, "end_s": 30893.932, "action": "Zoomed and manipulated the close-up model view, activated a face-editing tool, and entered a distance value before clicking and dragging on the box geometry.", "intent": "Modify or measure the rooftop box geometry.", "app": "SketchUp", "details": "The active tool displayed a distance of approximately 1' 9 3/8\" before further manipulation."}, {"start_s": 30893.932, "end_s": 30904.06, "action": "Orbited and zoomed around the rooftop box, clicked repeatedly on its edges or faces, and dragged across the model while keeping the opening centered.", "intent": "Inspect and adjust the box geometry from multiple viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 30904.06, "end_s": 30914.476, "action": "Selected the rim around the opening, entered short keyboard inputs, and activated a measuring or guide operation from the rim toward the surrounding geometry.", "intent": "Measure or create a guide related to the opening rim.", "app": "SketchUp", "details": "The rim was highlighted, and the measuring tool showed a long multi-segment length readout."}, {"start_s": 30914.476, "end_s": 30924.3, "action": "Clicked and dragged around the selected rim, zoomed and orbited outward, then continued manipulating the model from a wider angle.", "intent": "Continue positioning or inspecting the selected rooftop box geometry.", "app": "SketchUp", "details": null}, {"start_s": 30924.3, "end_s": 30934.364, "action": "Orbited and zoomed around the box, clicked on its edges, and used the line tool to place or extend a line on the front-right rim; the tool displayed a 9-inch length.", "intent": "Add or measure a line segment on the rooftop box rim.", "app": "SketchUp", "details": "The final view showed the line tool active with a 9\" length and green inference points on the rim."}, {"start_s": 30934.364, "end_s": 30942.711, "action": "Clicked in the SketchUp model and pressed undo repeatedly while viewing the hollow rectangular structure.", "intent": "Revert recent modeling changes.", "app": "SketchUp 2026", "details": "The hollow rectangular tower remained visible."}, {"start_s": 30942.711, "end_s": 30952.287, "action": "Zoomed and orbited around the hollow rectangular structure, briefly dragging near its upper-right area and then pulling back to a wider view.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "The camera moved from a close-up of the opening to a wider view of the structure on the floor plan."}, {"start_s": 30952.287, "end_s": 30962.485, "action": "Dragged and orbited around the structure, clicked within the model, and zoomed out to reveal the surrounding floor and building.", "intent": "Review the structure in the context of the larger model.", "app": "SketchUp 2026", "details": "The view changed from a close-up opening to a distant view showing the house and floor platform."}, {"start_s": 30962.485, "end_s": 30972.714, "action": "Orbited and zoomed around the model, activated Push/Pull, selected a large floor face, and entered a distance value ending with Enter.", "intent": "Modify the selected floor face using Push/Pull.", "app": "SketchUp 2026", "details": "The floor face became stippled/selected and the Push/Pull distance field showed changing values."}, {"start_s": 30972.714, "end_s": 30982.544, "action": "Orbited and zoomed into the hollow structure, inspected its interior and exterior faces, and then opened the Edit menu.", "intent": "Inspect the resulting geometry and access editing commands.", "app": "SketchUp 2026", "details": "The structure showed stepped interior faces; the Edit menu was open at the end."}, {"start_s": 30982.544, "end_s": 30992.684, "action": "Used the Edit menu and modeling tools, then orbited and zoomed around the structure and selected a navigation/orbit tool.", "intent": "Continue inspecting and navigating the SketchUp model.", "app": "SketchUp 2026", "details": "The Edit menu briefly showed Select All, and the final view was a close oblique view of the tower and floor."}, {"start_s": 30992.684, "end_s": 31002.529, "action": "Adjusted the SketchUp camera with repeated middle-button clicks and scrolls, moving from an exterior building view to a closer elevated view of the roof and chimney-like structure.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 31002.529, "end_s": 31013.095, "action": "Navigated closer around the roof structure, then selected the Line tool and began drawing or editing geometry along the roof edge.", "intent": "Modify roof geometry in the model.", "app": "SketchUp", "details": "The Line tool was active near the end, with a visible endpoint and a 9-inch length readout."}, {"start_s": 31013.095, "end_s": 31023.301, "action": "Orbited and zoomed around the chimney-like opening, selected faces, and used the Push/Pull tool to offset an interior face; the operation reached a 9-inch limit.", "intent": "Adjust the depth or interior geometry of the roof opening.", "app": "SketchUp", "details": "The Push/Pull operation displayed \u201cOffset limited to -9\u201d and a 9-inch distance."}, {"start_s": 31023.301, "end_s": 31033.212, "action": "Continued inspecting the opening with camera movements and used Push/Pull on its front and interior faces, then zoomed out to review the resulting rectangular structure.", "intent": "Refine and review the edited roof feature.", "app": "SketchUp", "details": "The final view showed the raised rectangular opening on the roof plane."}, {"start_s": 31033.212, "end_s": 31042.839, "action": "Selected faces inside the opening and used Push/Pull to extend or reposition interior surfaces, changing the visible internal ledge and floor while zooming out for inspection.", "intent": "Shape the interior of the roof opening.", "app": "SketchUp", "details": "Push/Pull distance readouts were visible, including approximately 2 feet 11 11/16 inches and 7 inches."}, {"start_s": 31042.839, "end_s": 31053.762, "action": "Selected the Rectangle tool, navigated around the opening, and began drawing a rectangular face or guide across the upper structure; the geometry remained in progress at the end.", "intent": "Add rectangular geometry to the roof feature.", "app": "SketchUp", "details": "The Rectangle tool was active, with first-corner and opposite-corner prompts and a dimensions readout."}, {"start_s": 31053.762, "end_s": 31063.641, "action": "Orbiting and zooming the SketchUp model changed the view from a close side angle to a centered view of the rooftop shaft, leaving the Push/Pull tool active with a distance of about 1' 3 5/8\".", "intent": "Inspect and reposition the 3D model view around the rooftop shaft.", "app": "SketchUp 2026", "details": null}, {"start_s": 31063.641, "end_s": 31074.187, "action": "Entered 9\" and confirmed it, then orbited and zoomed around the building and rooftop shaft to inspect the model from wider and closer angles.", "intent": "Adjust a model dimension and review the resulting geometry from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31074.187, "end_s": 31083.993, "action": "Switched to a drawing tool, selected points on the rooftop shaft, and created or adjusted a rectangular face across its top opening; the resulting top face became selected.", "intent": "Modify the rooftop shaft geometry by drawing a top surface.", "app": "SketchUp 2026", "details": null}, {"start_s": 31083.993, "end_s": 31094.022, "action": "Used Push/Pull on the selected rooftop face, entered 6\" and confirmed it, then zoomed and orbited out to inspect the raised top geometry in the context of the building.", "intent": "Extrude the rooftop face to a specified height and inspect the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 31094.022, "end_s": 31104.126, "action": "Continued orbiting and zooming around the edited rooftop shaft and surrounding building, then moved to the taskbar and switched toward Microsoft Edge.", "intent": "Review the edited model and transition to a web reference or asset search.", "app": "SketchUp 2026", "details": null}, {"start_s": 31104.126, "end_s": 31112.628, "action": "Switched to Microsoft Edge, focused the 3D Warehouse search field, entered \"lift room door,\" and submitted the search; the results page opened with model cards loading.", "intent": "Search 3D Warehouse for a lift room door model.", "app": "Microsoft Edge", "details": "3D Warehouse search results for \"lift room door\" were displayed."}, {"start_s": 31112.628, "end_s": 31122.695, "action": "Revealed Microsoft Edge and scrolled through 3D Warehouse results for \u201clift room door,\u201d moving down the model grid.", "intent": "Review available lift-room-door models.", "app": "Microsoft Edge", "details": null}, {"start_s": 31122.695, "end_s": 31131.625, "action": "Scrolled through the current results, selected the search field, entered \u201csmall door,\u201d and submitted the search.", "intent": "Search 3D Warehouse for small-door models.", "app": "Microsoft Edge", "details": "The page changed to a \u201csmall door\u201d results view."}, {"start_s": 31131.625, "end_s": 31141.681, "action": "Scrolled through the \u201csmall door\u201d results, selected the search field, appended \u201c iron,\u201d and submitted the revised search.", "intent": "Narrow the model search to small iron doors.", "app": "Microsoft Edge", "details": "Results displayed models including Small Wood Door, small old door, and Small Double Doors before the revised search was submitted."}, {"start_s": 31141.681, "end_s": 31151.997, "action": "Waited for the \u201csmall door iron\u201d results to load, selected the search field, appended \u201c grill,\u201d submitted the search, then pressed Backspace once.", "intent": "Refine the search toward small iron grill doors.", "app": "Microsoft Edge", "details": "The loaded results included iron fences and gates; the final Backspace modified the search field after submission."}, {"start_s": 31151.997, "end_s": 31162.502, "action": "Selected the search field, entered \u201cgrill iron door,\u201d and submitted the search; the page began loading a one-result view.", "intent": "Search for grill iron door models.", "app": "Microsoft Edge", "details": "The interim result view showed one unrelated model, \u201c1987 Buick Grand National,\u201d while the revised results loaded."}, {"start_s": 31162.502, "end_s": 31178.531, "action": "Scrolled through the \u201cgrill iron door\u201d results, then switched from Microsoft Edge to SketchUp; the Edge Downloads popover was visible during the transition.", "intent": "Review grill-door model results and return to the SketchUp project.", "app": "Microsoft Edge \u2192 SketchUp", "details": "Visible results included Grill Door 2, Window Grill Iron, and Metal Window Grill 2; the Downloads popover listed Component.skp and another SketchUp file."}, {"start_s": 31178.531, "end_s": 31185.999, "action": "Navigated around the SketchUp model with scrolling and middle-button view changes, then opened the File menu and moved to the Import command.", "intent": "Prepare to import content into the SketchUp model.", "app": "SketchUp 2026", "details": "The model showed a multi-story building and separate components; the File menu was open with Import highlighted."}, {"start_s": 31185.999, "end_s": 31195.829, "action": "Returned to the SketchUp modeling view, zoomed and repositioned the camera around the building, and activated the Move tool on a small selected component.", "intent": "Inspect and position a model component.", "app": "SketchUp 2026", "details": "The status bar showed Place component and later Move-related instructions; the view ended zoomed near the building facade."}, {"start_s": 31195.829, "end_s": 31207.199, "action": "Changed the camera orientation and zoom repeatedly around the building, then activated the Orbit tool and rotated to an overhead view where a circular object and building sections were visible.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp 2026", "details": "The Orbit tool was active and the model shifted from a close facade view to a distant angled view."}, {"start_s": 31207.199, "end_s": 31217.226, "action": "Continued orbiting and zooming around the building, selected geometry near the facade, and switched among modeling tools while bringing a railing-like element into close view.", "intent": "Examine and select facade geometry.", "app": "SketchUp 2026", "details": "The final view was a close-up of dark vertical railing geometry with selection grips visible."}, {"start_s": 31217.226, "end_s": 31227.219, "action": "Selected and copied the railing-like geometry, navigated around the model, and positioned the copied element while the distance field displayed changing measurements.", "intent": "Duplicate and place the railing component in the model.", "app": "SketchUp 2026", "details": "The status bar indicated copy placement, and the distance field showed approximately 5 1/2 inches before the view changed to another building area."}, {"start_s": 31227.219, "end_s": 31236.822, "action": "Zoomed and navigated to the building facade, then selected the railing assembly and activated the Scale tool, leaving the component highlighted with scale grips.", "intent": "Adjust the size or placement of the railing assembly.", "app": "SketchUp 2026", "details": "The final close-up showed the railing selected in yellow with green scale handles."}, {"start_s": 31236.822, "end_s": 31246.35, "action": "Navigated around the SketchUp model with repeated zooming and viewpoint adjustments, then selected the freestanding barred gate beside the structure.", "intent": "Inspect and select the gate component.", "app": "SketchUp 2026", "details": "The gate became highlighted in blue while the camera moved closer."}, {"start_s": 31246.35, "end_s": 31256.034, "action": "Moved the selected gate toward the building opening, adjusted the view, and finished with the gate positioned within the upper opening of the structure.", "intent": "Place the gate into the building opening.", "app": "SketchUp 2026", "details": "The gate was shown inside the opening in the final overview."}, {"start_s": 31256.034, "end_s": 31266.072, "action": "Changed the camera and entered scale manipulation on the gate, dragging a scale handle to adjust its proportions while inspecting the surrounding building.", "intent": "Resize the gate to fit the opening.", "app": "SketchUp 2026", "details": "The gate and nearby model geometry were selected; scale grips were visible at the end."}, {"start_s": 31266.072, "end_s": 31275.932, "action": "Continued adjusting the selected gate with scale-handle drags and camera movements, then zoomed in on its upper frame and barred face.", "intent": "Refine the gate fit and inspect its alignment.", "app": "SketchUp 2026", "details": "The gate remained selected with scale grips before the view shifted to a close-up."}, {"start_s": 31275.932, "end_s": 31286.164, "action": "Scaled and orbited the gate from close range, then changed to a front-facing view showing the gate against the building facade.", "intent": "Continue resizing and review the gate placement.", "app": "SketchUp 2026", "details": "The final view showed the barred gate selected beneath the facade."}, {"start_s": 31286.164, "end_s": 31296.678, "action": "Adjusted the camera around the structure and manipulated the selected gate with additional scale and drag actions, ending on an exterior view of the gate in the opening.", "intent": "Finalize the gate's size and placement.", "app": "SketchUp 2026", "details": "The gate remained selected with green scale grips in the final exterior view."}, {"start_s": 31296.678, "end_s": 31306.888, "action": "Scrolled and adjusted the selected gate assembly with the scale tool, changing the view from a close-up of the decorative rail to the full gate on the building.", "intent": "Inspect and resize the gate assembly in the 3D model.", "app": "SketchUp 2026", "details": "The gate remains selected with scale handles visible."}, {"start_s": 31306.888, "end_s": 31316.392, "action": "Exited the scale operation, zoomed and orbited around the building, and inspected the gate and its decorative circular rail from closer angles.", "intent": "Review the gate placement and geometry from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31316.392, "end_s": 31326.501, "action": "Selected and manipulated the gate, then orbited to reveal it separated from the building opening and continued navigating toward the opening.", "intent": "Move or inspect the gate relative to the building opening.", "app": "SketchUp 2026", "details": "The gate appears detached to the left of the rectangular opening."}, {"start_s": 31326.501, "end_s": 31335.7, "action": "Navigated around the empty opening, selected an edge, and activated the Rectangle tool to draw a rectangular face inside the opening.", "intent": "Create geometry for the interior opening or base surface.", "app": "SketchUp 2026", "details": "A rectangle preview is visible with dimensions shown in the status area."}, {"start_s": 31335.7, "end_s": 31343.28, "action": "Completed and selected the new rectangular face, opened its context menu, then closed it and activated Push/Pull on the face.", "intent": "Prepare the new rectangular face for extrusion.", "app": "SketchUp 2026", "details": "The rectangular face is selected inside the opening."}, {"start_s": 31343.28, "end_s": 31353.388, "action": "Adjusted the view around the opening and selected the rectangular face after the Push/Pull interaction, leaving the face highlighted.", "intent": "Inspect the newly created interior surface.", "app": "SketchUp 2026", "details": "The gate remains visible to the left and the rectangular interior face is selected."}, {"start_s": 31353.388, "end_s": 31363.465, "action": "Navigated around the SketchUp model with repeated clicks, scrolling, and orbiting, changing from a close view of the tower opening to a wider view showing the gate and surrounding roof.", "intent": "Inspect the modeled tower and gate from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31363.465, "end_s": 31373.776, "action": "Selected the metal gate, activated the Move tool, and dragged it toward the tower opening while adjusting the view with scrolling and middle-button navigation.", "intent": "Position the gate within the tower opening.", "app": "SketchUp 2026", "details": "The gate is visibly selected in blue and the Move tool shows a distance readout."}, {"start_s": 31373.776, "end_s": 31383.76, "action": "Adjusted the view around the tower, selected the gate, activated scaling, and manipulated the scale handles before returning to a front-facing view of the gate.", "intent": "Resize and inspect the gate for fit in the opening.", "app": "SketchUp 2026", "details": "The gate is shown selected with scale grips, then appears centered in the tower opening."}, {"start_s": 31383.76, "end_s": 31393.774, "action": "Orbited and zoomed out extensively to review the tower, roof, and surrounding building from wider angles.", "intent": "Review the gate placement in the overall building model.", "app": "SketchUp 2026", "details": "The final view shows the building exterior with the tower and gate visible at a distance."}, {"start_s": 31393.774, "end_s": 31403.727, "action": "Continued orbiting and zooming around the building, moving from the rooftop and tower to a broader exterior perspective, then selected model geometry near the roof.", "intent": "Inspect the overall model and select geometry for further editing.", "app": "SketchUp 2026", "details": "The final screenshot shows selected roof and tower edges highlighted blue."}, {"start_s": 31403.727, "end_s": 31413.678, "action": "Changed tools and clicked around the rooftop and building edge while entering shortcut keys, ending with the Offset tool active over a selected face or edge.", "intent": "Prepare to modify a roof or building surface.", "app": "SketchUp 2026", "details": "The status bar reads \u201cSelect face or edges to offset,\u201d and the view is zoomed near the roof perimeter."}, {"start_s": 31413.678, "end_s": 31423.435, "action": "Entered a distance of 9 inches and confirmed it, then scrolled within the SketchUp model view.", "intent": "Set or adjust a model dimension using the active tool.", "app": "SketchUp 2026", "details": "The roof surface and surrounding building geometry remained visible."}, {"start_s": 31423.435, "end_s": 31443.435, "action": "Paused without recorded interaction while viewing the SketchUp model.", "intent": "Review the current model view.", "app": "SketchUp 2026", "details": "The camera view remained on the rooftop and upper building."}, {"start_s": 31443.435, "end_s": 31452.349, "action": "Scrolled and clicked around the roof geometry, typed \u201cp,\u201d and changed the view to a close-up of the roof edge and parapet.", "intent": "Inspect or modify rooftop geometry with SketchUp tools.", "app": "SketchUp 2026", "details": "The active tool later showed a distance of approximately 1\u2032 9 9/16\u2033 and a roof-edge face was highlighted."}, {"start_s": 31452.349, "end_s": 31463.181, "action": "Used middle-button orbiting and scrolling to rotate around the upper building, bringing the roof parapets and front facade into view.", "intent": "Change the camera angle to inspect the building exterior and rooftop.", "app": "SketchUp 2026", "details": "The orbit tool was active and the model view shifted around the roof."}, {"start_s": 31463.181, "end_s": 31473.107, "action": "Entered a distance of 3 feet and confirmed it, then scrolled, clicked, and orbited to zoom out and inspect the building from wider exterior angles.", "intent": "Adjust a model dimension and review the resulting building geometry.", "app": "SketchUp 2026", "details": "The wider view showed the rooftop, parapets, balconies, doors, and windows."}, {"start_s": 31473.107, "end_s": 31484.207, "action": "Orbited and zoomed around the building, clicked model elements, and issued several undo commands while moving to a wider rooftop view.", "intent": "Inspect the model and revise recent geometry or view changes.", "app": "SketchUp 2026", "details": "The final view showed the rooftop, chimney-like structure, facade, and nearby building geometry."}, {"start_s": 31484.207, "end_s": 31494.36, "action": "Adjusted the SketchUp view around the rooftop, using scrolling and middle-button navigation, then selected and manipulated rooftop geometry.", "intent": "Inspect and adjust rooftop model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 31494.36, "end_s": 31504.039, "action": "Entered a short distance value and confirmed it, then used Push/Pull and middle-button navigation to modify or inspect the rooftop perimeter; the view zoomed out to show more of the building.", "intent": "Modify the rooftop perimeter and review the resulting model view.", "app": "SketchUp 2026", "details": "The Push/Pull tool displayed a distance of approximately 2' 5 3/4\"."}, {"start_s": 31504.039, "end_s": 31514.275, "action": "Navigated around the SketchUp model with middle-button clicks and scrolling, changing from a rooftop close-up to a wider perspective of the building and adjacent model elements.", "intent": "Review the building model from a wider angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 31514.275, "end_s": 31524.055, "action": "Orbited and zoomed around the upper fa\u00e7ade and rooftop, moving from a close view of the roof edge and chimney toward a centered view of the rooftop and front balconies.", "intent": "Inspect rooftop and upper fa\u00e7ade details.", "app": "SketchUp 2026", "details": null}, {"start_s": 31524.055, "end_s": 31534.005, "action": "Continued orbiting and zooming around the building, inspecting the rooftop chimney and then pulling back to a front elevation view of the multi-story fa\u00e7ade.", "intent": "Review the building exterior and rooftop feature from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31534.005, "end_s": 31543.356, "action": "Navigated around the building with repeated middle-button orbiting and scrolling, moving from a close fa\u00e7ade view to a broader angled perspective showing the rooftop, balconies, windows, and doors.", "intent": "Inspect the completed exterior model from additional angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 31543.356, "end_s": 31559.595, "action": "Scrolled repeatedly in the SketchUp viewport while viewing the exterior apartment building model.", "intent": "Inspect the 3D building model from the current view.", "app": "SketchUp 2026", "details": null}, {"start_s": 31559.595, "end_s": 31572.13, "action": "Clicked and scrolled through the SketchUp viewport, orbiting and zooming from a close facade view to a wider view of the apartment building and nearby structures.", "intent": "Adjust the camera to inspect different building elevations and the overall model.", "app": "SketchUp 2026", "details": null}, {"start_s": 31572.13, "end_s": 31589.011, "action": "Scrolled and orbited around the model, moving between close and distant views of the apartment facade, balconies, roof, and surrounding structures.", "intent": "Continue reviewing the 3D model from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 31589.011, "end_s": 31599.607, "action": "Switched to the recorder window and continued clicking, scrolling, and orbiting the SketchUp viewport, changing from a front roof view to a distant overall view of the building.", "intent": "Inspect the model from additional viewpoints after the application transition.", "app": "SketchUp 2026", "details": null}, {"start_s": 31599.607, "end_s": 31609.572, "action": "Clicked and scrolled repeatedly to navigate from the overall model into close views along the building side, balconies, windows, and perimeter wall; typed the character \u201ct\u201d near the end.", "intent": "Examine detailed geometry along the building exterior.", "app": "SketchUp 2026", "details": "The viewport ended on a close-up of balconies and the lower perimeter wall."}, {"start_s": 31609.572, "end_s": 31619.527, "action": "Continued navigating the close-up exterior with middle- and left-clicks and brief scrolling, then used the Tape Measure tool to place or extend a guide along the wall; the displayed length reached approximately 8' 11 3/4\".", "intent": "Measure or align exterior geometry in the SketchUp model.", "app": "SketchUp 2026", "details": "Tape Measure mode was active and a guide line was visible in the final view."}, {"start_s": 31619.527, "end_s": 31629.467, "action": "Orbited and zoomed around the building model, then switched to the guide tool and positioned the view near a balcony wall.", "intent": "Inspect the building exterior and navigate to a specific wall area.", "app": "SketchUp 2026", "details": null}, {"start_s": 31629.467, "end_s": 31640.593, "action": "Zoomed and orbited outward around the model, moving from a close wall view to an elevated overview of the rooftop structure and surrounding building.", "intent": "Review the building\u2019s rooftop and exterior geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 31640.593, "end_s": 31650.525, "action": "Orbited and zoomed toward the front facade, inspecting the stacked balconies, doors, windows, and rooftop edge.", "intent": "Examine the facade layout and exterior architectural details.", "app": "SketchUp 2026", "details": null}, {"start_s": 31650.525, "end_s": 31663.403, "action": "Paused briefly, then zoomed and orbited to frame the full front elevation, including the rooftop, multiple floors, balconies, and ground-level entrance area.", "intent": "Review the overall front elevation of the building.", "app": "SketchUp 2026", "details": null}, {"start_s": 31663.403, "end_s": 31672.468, "action": "Zoomed into the ground-floor facade and tiled entrance area, then zoomed back out to inspect the lower levels and front boundary wall.", "intent": "Inspect the entrance, ground-floor materials, and lower facade.", "app": "SketchUp 2026", "details": null}, {"start_s": 31672.468, "end_s": 31682.569, "action": "Orbited and zoomed tightly onto a wall-mounted rectangular grille or vent assembly, adjusting the view to center and inspect its slatted and panelled components.", "intent": "Examine the wall-mounted architectural fixture in detail.", "app": "SketchUp 2026", "details": null}, {"start_s": 31682.569, "end_s": 31693.668, "action": "Orbited and zoomed the SketchUp view around a small wall-mounted rectangular feature, changing from a close-up to a wider building perspective.", "intent": "Inspect the modeled feature in context.", "app": "SketchUp 2026", "details": null}, {"start_s": 31693.668, "end_s": 31704.279, "action": "Zoomed and orbited around the building fa\u00e7ade, bringing the small rectangular wall feature into closer view and then repositioning the camera.", "intent": "Examine the fa\u00e7ade and wall-mounted feature.", "app": "SketchUp 2026", "details": null}, {"start_s": 31704.279, "end_s": 31714.213, "action": "Clicked and orbited repeatedly, zooming out from the fa\u00e7ade to show the full building and then moving to an elevated rooftop view with nearby structures.", "intent": "Review the overall 3D model from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31714.213, "end_s": 31722.528, "action": "Entered the letter r, navigated to a rooftop structure, and activated the Rectangle tool to begin drawing on the roof edge.", "intent": "Start creating a rectangular element on the rooftop structure.", "app": "SketchUp 2026", "details": "The Rectangle tool was active and waiting for the opposite corner."}, {"start_s": 31722.528, "end_s": 31732.985, "action": "Entered dimensions 6\",6\" to complete the rectangle, then clicked and adjusted the resulting rectangular face near the rooftop structure.", "intent": "Create a 6-by-6 inch rectangular element.", "app": "SketchUp 2026", "details": "The completed rectangle was highlighted in blue."}, {"start_s": 31732.985, "end_s": 31743.11, "action": "Typed p and navigated the view, then entered 10' and repositioned the camera around the rooftop structure and the new rectangular element.", "intent": "Modify or inspect the rooftop element using a distance value and alternate views.", "app": "SketchUp 2026", "details": "The model was shown in a translucent editing view with the rectangular element selected."}, {"start_s": 31743.11, "end_s": 31753.549, "action": "Orbited and zoomed around the SketchUp model, selected a narrow edge or face, and began positioning a copied element with the Move tool.", "intent": "Adjust the view and prepare a model element for placement.", "app": "SketchUp 2026", "details": "The selected element and Move tool were visible; the distance field showed 3' 3\" near the end."}, {"start_s": 31753.549, "end_s": 31761.68, "action": "Scrolled while keeping the narrow model element active in the Move operation; the distance readout changed as the view and placement were adjusted.", "intent": "Continue positioning the selected or copied model element.", "app": "SketchUp 2026", "details": "The element remained highlighted in blue and the Move tool status was visible."}, {"start_s": 31761.68, "end_s": 31770.919, "action": "Entered 6\" and confirmed the value, then adjusted the view and used the Move tool around the selected narrow element.", "intent": "Set a precise movement distance for the model element.", "app": "SketchUp 2026", "details": "The distance field visibly showed 6\" before the later view adjustment."}, {"start_s": 31770.919, "end_s": 31783.017, "action": "Selected the narrow element and entered 12\", confirmed it, then began entering another distance value.", "intent": "Apply a 12-inch placement adjustment and continue precise positioning.", "app": "SketchUp 2026", "details": "The distance field showed 12 while the element remained selected."}, {"start_s": 31783.017, "end_s": 31793.287, "action": "Entered and confirmed 5, canceled or undid the active operation, then navigated the view and selected the resulting narrow beam-like element.", "intent": "Finalize or revise the element placement and inspect the model.", "app": "SketchUp 2026", "details": "The view pulled back to show the selected narrow element extending from the building."}, {"start_s": 31793.287, "end_s": 31802.456, "action": "Navigated closer, selected the long narrow element, and entered 1' followed by Enter to set another precise movement distance.", "intent": "Continue positioning the selected element with a one-foot offset.", "app": "SketchUp 2026", "details": "The element stayed highlighted in blue and the distance field showed 1' near the end."}, {"start_s": 31802.456, "end_s": 31812.64, "action": "Type a wildcard and 6, confirm the entry, then scroll and middle-click to orbit around the selected roof beam assembly.", "intent": "Inspect and reposition the selected roof beam in the 3D model.", "app": "SketchUp 2026", "details": null}, {"start_s": 31812.64, "end_s": 31822.935, "action": "Click and orbit repeatedly while scrolling to move from a close-up of the roof beams to a wider view of the building model.", "intent": "Review the roof structure and its placement in the overall building.", "app": "SketchUp 2026", "details": null}, {"start_s": 31822.935, "end_s": 31832.83, "action": "Continue orbiting and scrolling around the model, moving from the underside of the beams to a higher overhead view of the roof structure.", "intent": "Examine the beam arrangement and surrounding roof geometry from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 31832.83, "end_s": 31842.667, "action": "Orbit and scroll to inspect the roof edge and beam ends from closer exterior angles, then type \"r\".", "intent": "Adjust the viewing angle and begin a keyboard command or entry.", "app": "SketchUp 2026", "details": null}, {"start_s": 31842.667, "end_s": 31853.209, "action": "Scroll and orbit into a close-up of a beam end, activate a drawing tool, and enter 6\",6\" followed by Enter and a space.", "intent": "Create or size geometry at the beam end using explicit dimensions.", "app": "SketchUp 2026", "details": "The status bar shows a drawing operation with dimensions being entered."}, {"start_s": 31853.209, "end_s": 31863.784, "action": "Click and drag around the beam-end geometry, use a context click, type \"p\", then scroll and orbit out to a distant view of the building.", "intent": "Modify or inspect the newly created beam-end geometry and review it in context.", "app": "SketchUp 2026", "details": null}, {"start_s": 31863.784, "end_s": 31873.667, "action": "Scrolled and navigated around the SketchUp model, then changed the camera view to inspect the roof structure and front gate area.", "intent": "Inspect the modeled structure from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 31873.667, "end_s": 31883.716, "action": "Selected a vertical structural element, typed modeling commands including \u201cm,\u201d Enter, and \u201c*6,\u201d and created or positioned repeated copies along the roof structure.", "intent": "Duplicate a structural member across the modeled roof.", "app": "SketchUp 2026", "details": "The repeated vertical members are visible across the roof edge."}, {"start_s": 31883.716, "end_s": 31893.185, "action": "Continued positioning a selected copied member with the Move tool, adjusted the view, and entered an asterisk command to continue the array operation.", "intent": "Extend the repeated-member layout.", "app": "SketchUp 2026", "details": "A selected vertical member and Move tool controls remain visible."}, {"start_s": 31893.185, "end_s": 31903.538, "action": "Confirmed the copy operation with \u201c6\u201d and Enter, then orbited and zoomed around the model to review the resulting row of repeated roof slats.", "intent": "Complete the array and inspect the result.", "app": "SketchUp 2026", "details": "The model shows a dense row of parallel slats forming the pergola-like roof feature."}, {"start_s": 31903.538, "end_s": 31914.021, "action": "Orbited, panned, and zoomed around the SketchUp model, reviewing the gate, roof slats, and surrounding house from several angles.", "intent": "Inspect the completed modeled feature in context.", "app": "SketchUp 2026", "details": "Views transition from an elevated perspective to a frontal view of the gate and pergola."}, {"start_s": 31914.021, "end_s": 31925.498, "action": "Continued orbiting and zooming around the house entrance, then activated a guide-related tool and positioned a guide line across the model.", "intent": "Review the entrance assembly and establish a reference guide.", "app": "SketchUp 2026", "details": "A guide line and guide-tool cursor are visible in the final view."}, {"start_s": 31925.498, "end_s": 31935.53, "action": "Scrolled and adjusted the SketchUp camera around the rooftop gate-and-pergola model, clicked in the viewport, and entered a few characters while the guide tool remained active.", "intent": "Inspect the model from a closer angle and position or modify a guide.", "app": "SketchUp 2026", "details": "The view changed from a wider front perspective to a close-up of the barred gate and roof structure."}, {"start_s": 31935.53, "end_s": 31945.431, "action": "Clicked and navigated around the model, changed the view to a wider perspective, and selected the roof slab or related geometry; additional clicks and drags adjusted guide or selection placement near the gate.", "intent": "Inspect and refine the rooftop model geometry or guide positioning.", "app": "SketchUp 2026", "details": "The final view showed the roof slab outlined in blue with the gate and pergola visible."}, {"start_s": 31945.431, "end_s": 31955.607, "action": "Scrolled extensively and orbited the camera around the rooftop structure, then clicked and dragged in the viewport while entering a few characters and spaces.", "intent": "Review the model from elevated and alternate angles.", "app": "SketchUp 2026", "details": "The camera moved from a front close-up to elevated views showing the roof, gate, pergola, and detached upper building elements."}, {"start_s": 31955.607, "end_s": 31966.56, "action": "Clicked and dragged around the model, zoomed and navigated the viewport, then selected the rooftop assembly and activated the Scale tool, displaying a large bounding box with scale grips.", "intent": "Select the rooftop geometry and prepare to scale it.", "app": "SketchUp 2026", "details": "The final view showed selected geometry and yellow scale handles around the roof area."}, {"start_s": 31966.56, "end_s": 31976.869, "action": "Adjusted the scale operation by clicking and dragging in the viewport, reducing the displayed blue scale value to 0.82, then completed or exited the operation and changed to a wider perspective.", "intent": "Resize the selected rooftop assembly.", "app": "SketchUp 2026", "details": "The selected bounding box disappeared in the final view, leaving the rooftop gate-and-pergola assembly visible over the building plan."}, {"start_s": 31976.869, "end_s": 31986.741, "action": "Navigated and orbited the SketchUp camera around the building, clicked and dragged in the viewport, and ended on a zoomed-out elevated view of the rooftop assembly and surrounding building.", "intent": "Inspect the scaled result from multiple exterior angles.", "app": "SketchUp 2026", "details": "The final view showed the complete rooftop, the gate-and-pergola structure, and nearby detached building components."}, {"start_s": 31986.741, "end_s": 31996.731, "action": "Selected successive vertical slatted components in the SketchUp model, extending the blue-highlighted selection across the row while adjusting the view.", "intent": "Select the slatted elements for subsequent editing or manipulation.", "app": "SketchUp 2026", "details": null}, {"start_s": 31996.731, "end_s": 32006.706, "action": "Selected additional slats, entered brief keyboard input, then activated Move and dragged the selected slatted assembly away from the building; zoomed out to show the separated copy.", "intent": "Move or duplicate the selected slatted assembly within the model.", "app": "SketchUp 2026", "details": "The final view shows the selected slatted assembly displaced to the right of the building."}, {"start_s": 32006.706, "end_s": 32016.892, "action": "Orbited and zoomed around the model, then selected a smaller slatted section and began moving it toward the front facade.", "intent": "Position a slatted component on the building facade.", "app": "SketchUp 2026", "details": "The slatted section is highlighted in blue beside the upper opening in the final view."}, {"start_s": 32016.892, "end_s": 32026.997, "action": "Navigated around the pergola-like structure with orbit and zoom actions, clicked near the roof and supports, and inspected the underside and slatted roof from several angles.", "intent": "Review the placement and geometry of the roof and support elements.", "app": "SketchUp 2026", "details": null}, {"start_s": 32026.997, "end_s": 32036.388, "action": "Orbited to a wider view, selected a roof face, activated Push/Pull, and entered a distance value ending with Enter to modify the face.", "intent": "Adjust the thickness or extrusion of the selected roof face.", "app": "SketchUp 2026", "details": "The Push/Pull tool is active on the lower roof opening area in the evidence."}, {"start_s": 32036.388, "end_s": 32046.35, "action": "Orbited and zoomed around the building, clicked and dragged near the central opening, then continued inspecting the pergola roof, supports, and adjacent facade from elevated angles.", "intent": "Review the modified structure and its surrounding model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32046.35, "end_s": 32056.099, "action": "Adjusted the SketchUp view with orbit, zoom, and pan inputs, then selected a narrow vertical face in the model.", "intent": "Inspect and prepare a facade face for editing.", "app": "SketchUp 2026", "details": "The view changed from a close-up of the structure to a wider exterior view, with the narrow face highlighted."}, {"start_s": 32056.099, "end_s": 32066.156, "action": "Navigated around the model using orbit and zoom controls, selected the narrow vertical face, and activated Push/Pull to set its depth to 9 inches.", "intent": "Modify the selected architectural face.", "app": "SketchUp 2026", "details": "The selected face remained highlighted and the Distance field showed 9 inches."}, {"start_s": 32066.156, "end_s": 32076.132, "action": "Zoomed and orbited around the structure, selected a small face near the opening, and adjusted the view after interacting with the geometry.", "intent": "Inspect and edit geometry around the opening.", "app": "SketchUp 2026", "details": "A small rectangular face near the right side of the opening was highlighted during the inspection."}, {"start_s": 32076.132, "end_s": 32087.472, "action": "Navigated closer to the opening, selected the narrow side face, and used Push/Pull to apply an offset limited to 5 feet.", "intent": "Extend or adjust the selected wall face.", "app": "SketchUp 2026", "details": "The on-screen prompt reported \u201cOffset limited to 5\u2019,\u201d and the Distance field showed 5 feet."}, {"start_s": 32087.472, "end_s": 32096.764, "action": "Orbited and zoomed out around the edited structure, then selected another face and continued positioning the model for inspection.", "intent": "Review the architectural changes from different angles.", "app": "SketchUp 2026", "details": "The resulting view showed the pergola-like roof, vertical slats, and edited wall area from an oblique angle."}, {"start_s": 32096.764, "end_s": 32106.575, "action": "Orbited and zoomed to the front of the structure, selected a vertical face, and activated Push/Pull on the larger interior wall face.", "intent": "Prepare another wall face for dimensional editing.", "app": "SketchUp 2026", "details": "The final view showed the interior face highlighted with Push/Pull active and a distance of 9 inches."}, {"start_s": 32106.575, "end_s": 32116.777, "action": "Adjusted the SketchUp camera around the architectural model with repeated orbit/zoom inputs, then selected and pushed or pulled a face on the small foreground structure, leaving a visible distance value.", "intent": "Refine the 3D view and modify a selected architectural face.", "app": "SketchUp 2026", "details": "The view changed from a close frontal angle to an elevated perspective of the roofed structure and slatted screen."}, {"start_s": 32116.777, "end_s": 32126.851, "action": "Selected faces around the foreground enclosure and orbited/zoomed closer, then changed the active tool to orbit while inspecting the vertical wall and surrounding frame.", "intent": "Inspect and position the model for further editing.", "app": "SketchUp 2026", "details": "The vertical face was highlighted and the final view showed a close-up of the enclosure beneath the overhang."}, {"start_s": 32126.851, "end_s": 32137.414, "action": "Clicked faces and navigated around the enclosure with orbit/zoom inputs, then entered brief keyboard commands while continuing to inspect the roof, walls, and open foreground box.", "intent": "Continue examining the model and prepare another edit.", "app": "SketchUp 2026", "details": "The camera moved from the enclosure front to a closer side and overhead view."}, {"start_s": 32137.414, "end_s": 32147.556, "action": "Entered additional brief keyboard input, selected and pushed or pulled a face on the foreground structure, orbited around the model, and zoomed out to review the broader arrangement.", "intent": "Modify the enclosure geometry and review the overall design.", "app": "SketchUp 2026", "details": "The final view showed the complete roofed frame, vertical slats, foreground box, and surrounding boundary walls."}, {"start_s": 32147.556, "end_s": 32157.129, "action": "Repeatedly clicked the left side of the roofed structure while navigating the camera, then selected a large vertical side face and orbited to view it from the opposite side.", "intent": "Select and inspect the large side face of the architectural structure.", "app": "SketchUp 2026", "details": "The selected face was highlighted with a blue outline in the final elevated perspective."}, {"start_s": 32157.129, "end_s": 32166.939, "action": "Selected multiple vertical faces, entered a brief keyboard command, dragged on the model, and switched to the Move tool, leaving the selected wall-like geometry ready to reposition.", "intent": "Prepare to move the selected architectural geometry.", "app": "SketchUp 2026", "details": "The final view showed several connected faces highlighted and the Move tool active."}, {"start_s": 32166.939, "end_s": 32177.227, "action": "Orbited and zoomed around the SketchUp rooftop model, then selected the small projecting element beneath the pergola roof.", "intent": "Inspect and select a rooftop architectural component.", "app": "SketchUp 2026", "details": null}, {"start_s": 32177.227, "end_s": 32187.246, "action": "Zoomed and orbited closer to the pergola and rooftop enclosure, clicked several model components, and left the view focused on the upper roof and projecting element.", "intent": "Examine the pergola structure and nearby components from multiple viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32187.246, "end_s": 32197.53, "action": "Activated Move, selected the small horizontal element near the enclosure, and moved it while changing the view; the distance field showed approximately 2' 5\" and later 4' 3 5/8\".", "intent": "Reposition a selected rooftop model component.", "app": "SketchUp 2026", "details": "The Move tool remained active while the selected element was adjusted."}, {"start_s": 32197.53, "end_s": 32207.52, "action": "Continued moving and orbiting around the rooftop enclosure, then selected the flat roof slab and changed to a closer view of the pergola and enclosure.", "intent": "Adjust and inspect rooftop geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32207.52, "end_s": 32218.561, "action": "Zoomed and orbited out to review the rooftop model from wider angles, including the enclosure, pergola frames, parapet walls, and gate.", "intent": "Review the overall rooftop arrangement after the geometry edits.", "app": "SketchUp 2026", "details": null}, {"start_s": 32218.561, "end_s": 32227.211, "action": "Orbited toward the front of the rooftop enclosure, clicked the upper horizontal trim/opening area several times, and selected the component beneath the top slab.", "intent": "Inspect and select the enclosure\u2019s upper front component.", "app": "SketchUp 2026", "details": null}, {"start_s": 32227.211, "end_s": 32237.235, "action": "Selected the horizontal beam beneath the roof and adjusted the view around it with scrolling and clicks.", "intent": "Inspect or position the roof beam in the model.", "app": "SketchUp 2026", "details": null}, {"start_s": 32237.235, "end_s": 32248.321, "action": "Zoomed and orbited away from the roof structure, then selected the rooftop gate assembly and began moving it; the gate became highlighted with a move distance shown.", "intent": "Reposition the rooftop gate assembly.", "app": "SketchUp 2026", "details": "The gate is selected and appears displaced during the move operation."}, {"start_s": 32248.321, "end_s": 32258.724, "action": "Navigated around the selected gate with repeated zooming and orbiting, switched to the Scale tool, and displayed scale handles around the gate.", "intent": "Prepare to resize the gate assembly.", "app": "SketchUp 2026", "details": "The gate remains selected with green scale grips visible."}, {"start_s": 32258.724, "end_s": 32268.762, "action": "Scaled the selected gate assembly while zooming and orbiting, changing the view from an elevated front perspective to a close-up of the gate.", "intent": "Adjust the gate assembly dimensions and inspect the result.", "app": "SketchUp 2026", "details": "The gate remains outlined with scale handles during the adjustment."}, {"start_s": 32268.762, "end_s": 32278.124, "action": "Orbited and zoomed out from the gate to review the surrounding rooftop and building model, then selected a rooftop edge or beam.", "intent": "Review the gate placement in the overall model and inspect another rooftop element.", "app": "SketchUp 2026", "details": null}, {"start_s": 32278.124, "end_s": 32288.468, "action": "Orbited and zoomed around the rooftop, dragged a rooftop structure or canopy component, and ended with a wider view showing separated rooftop elements and the building.", "intent": "Reposition or inspect rooftop canopy components.", "app": "SketchUp 2026", "details": "The final view shows the rooftop gate, canopy-like slatted structures, and building components from above."}, {"start_s": 32288.468, "end_s": 32298.64, "action": "Dragged and orbited the SketchUp view around the rooftop model, then clicked and scrolled to reposition the camera and inspect the roof structures.", "intent": "Inspect the rooftop geometry from multiple angles.", "app": "SketchUp", "details": null}, {"start_s": 32298.64, "end_s": 32308.899, "action": "Selected successive vertical slats and dragged across the model while entering brief keyboard inputs; changed the view to show the roof structure from farther away.", "intent": "Select and adjust elements of the rooftop slat assembly.", "app": "SketchUp", "details": null}, {"start_s": 32308.899, "end_s": 32318.938, "action": "Clicked and dragged across multiple slats, entered a character, and orbited or zoomed the camera; activated the Tape Measure tool and positioned a measurement guide near the slat assembly.", "intent": "Measure or align the rooftop slat assembly.", "app": "SketchUp", "details": null}, {"start_s": 32318.938, "end_s": 32328.859, "action": "Scrolled and orbited around the model while the Tape Measure tool remained active, repositioning the view from the close-up slats to a broader rooftop perspective.", "intent": "Review the measured rooftop geometry from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 32328.859, "end_s": 32338.979, "action": "Orbited and zoomed out to inspect the building and nearby model, then switched to the Line tool and positioned a line endpoint near the slat assembly.", "intent": "Create or position construction geometry around the rooftop feature.", "app": "SketchUp", "details": null}, {"start_s": 32338.979, "end_s": 32349.344, "action": "Entered 10' and pressed Enter while drawing with the Line tool, then orbited and zoomed closer to the building and slat assembly.", "intent": "Set a precise line length and inspect its placement in the model.", "app": "SketchUp", "details": "The Line tool displayed a length of 10 after the numeric entry."}, {"start_s": 32349.344, "end_s": 32359.398, "action": "Dragged across the SketchUp model, selected the set of parallel slatted elements, and opened its context menu.", "intent": "Select the slatted model component for further editing.", "app": "SketchUp", "details": "The slatted elements were highlighted in blue and the context menu was visible."}, {"start_s": 32359.398, "end_s": 32369.637, "action": "Dismissed the context menu, activated Move, and repositioned the selected slatted component onto the building facade while adjusting the view.", "intent": "Place the selected component against the building facade.", "app": "SketchUp", "details": "The selected component remained highlighted and appeared aligned across a facade opening."}, {"start_s": 32369.637, "end_s": 32379.396, "action": "Adjusted the camera and manipulated the selected slatted component, moving it away from the facade to inspect its placement from different angles.", "intent": "Review and refine the component position in the 3D model.", "app": "SketchUp", "details": "The component stayed selected and was shown offset from the building."}, {"start_s": 32379.396, "end_s": 32388.6, "action": "Orbited and zoomed around the selected component, then continued a move operation while inspecting its roof-like slatted surface.", "intent": "Inspect the component geometry and positioning from close views.", "app": "SketchUp", "details": "The view moved from an exterior perspective to a close-up of the selected slats."}, {"start_s": 32388.6, "end_s": 32399.002, "action": "Navigated around the model and moved the selected slatted structure toward an adjacent rooftop and barred opening.", "intent": "Position the structure relative to the nearby building elements.", "app": "SketchUp", "details": "The selected structure was shown extending beside the rooftop and above the barred opening."}, {"start_s": 32399.002, "end_s": 32408.384, "action": "Continued adjusting the selected structure and orbited downward around the building, ending on a lower exterior view of the vertical slats.", "intent": "Inspect the final placement from below and from the exterior.", "app": "SketchUp", "details": "The slatted elements remained selected while the camera shifted to a ground-level perspective."}, {"start_s": 32408.384, "end_s": 32418.249, "action": "Adjusted the SketchUp camera from a close view of the selected roof structure to a wider elevated view of the building models, using clicks, drags, and scroll navigation.", "intent": "Reorient and inspect the 3D model.", "app": "SketchUp", "details": "The view changed from a selected close-up to a wide overhead perspective."}, {"start_s": 32418.249, "end_s": 32434.324, "action": "Scrolled and slightly adjusted the camera while reviewing the rooftop structures and nearby building in the SketchUp scene.", "intent": "Inspect the model from an elevated perspective.", "app": "SketchUp", "details": null}, {"start_s": 32434.324, "end_s": 32443.949, "action": "Navigated closer around the rooftop slatted structure with repeated middle-button camera movements and scrolling, ending on a tighter view between the vertical slats.", "intent": "Examine the rooftop detail.", "app": "SketchUp", "details": "The camera moved from a wider roof view to a close inspection of the slatted assembly."}, {"start_s": 32443.949, "end_s": 32453.297, "action": "Selected geometry around the slatted roof area and activated a drawing tool, then right-clicked the selected slatted faces to open the context menu.", "intent": "Prepare or inspect the rooftop geometry for editing.", "app": "SketchUp", "details": "The context menu displayed options including Erase, Hide, Select, Make Group, and Intersect Faces."}, {"start_s": 32453.297, "end_s": 32472.429, "action": "Edited the rooftop assembly with tool clicks and typed numeric input, then adjusted the camera and completed the operation before the SketchUp window transitioned back to the active application view.", "intent": "Modify the rooftop geometry.", "app": "SketchUp", "details": "The model briefly showed an active face-editing operation with a distance readout before returning to a normal view."}, {"start_s": 32472.429, "end_s": 32481.496, "action": "Returned to the SketchUp window, clicked and navigated around the rooftop structure, then opened the Default Tray Materials panel and selected the Paint Bucket tool.", "intent": "Prepare to apply or inspect materials on the model.", "app": "SketchUp", "details": "The Materials panel was visible with the material name M09_Shadow_Night and glass material swatches."}, {"start_s": 32481.496, "end_s": 32492.062, "action": "Switched to SketchUp, adjusted the camera around the rooftop structure, and interacted with the Materials tray while the roof surface changed appearance.", "intent": "Inspect and adjust the rooftop material or view.", "app": "SketchUp", "details": "Selected material shown as Glass_Basic_01."}, {"start_s": 32492.062, "end_s": 32507.711, "action": "Navigated around the SketchUp model with orbit and zoom gestures, moving from a close view of the slatted rooftop structure to a wider building view and changing the selected material to Glass_Mirror_01.", "intent": "Review the model from different viewpoints and inspect material options.", "app": "SketchUp", "details": "Materials tray remained open on the right."}, {"start_s": 32507.711, "end_s": 32517.845, "action": "Switched between SketchUp windows, navigated the model, and triggered an overwrite confirmation dialog for an existing file before continuing to adjust the view.", "intent": "Save or overwrite the SketchUp model while reviewing it.", "app": "SketchUp", "details": "A SketchUp dialog asked, \u201cOverwrite existing file?\u201d"}, {"start_s": 32517.845, "end_s": 32528.003, "action": "Changed the active material to Glass_Safety_01, adjusted its visible material settings, and orbited and zoomed out to review the building and rooftop structure together.", "intent": "Apply or inspect a safety-glass material and review the model.", "app": "SketchUp", "details": "Material settings showed opacity and metalness controls."}, {"start_s": 32528.003, "end_s": 32538.173, "action": "Zoomed and orbited into a close-up of the slatted rooftop surface, then interacted with the material controls and changed the displayed material from Glass_Safety_01 to Glass_Basic_01.", "intent": "Inspect and refine the rooftop glazing material.", "app": "SketchUp", "details": "The view ended focused tightly on the roof slats."}, {"start_s": 32538.173, "end_s": 32548.064, "action": "Continued orbiting around the rooftop enclosure and adjusted the material settings, ending on a closer view of the roof slats and barred side panel with Glass_Basic_01 selected.", "intent": "Review the applied material and rooftop enclosure from another angle.", "app": "SketchUp", "details": "Materials tray showed opacity and other surface controls."}, {"start_s": 32548.064, "end_s": 32557.898, "action": "Navigated around the SketchUp model with orbiting, zooming, and scrolling, then sampled and applied glass materials to the rooftop canopy and adjacent slatted elements.", "intent": "Inspect and refine glass material assignments on the canopy assembly.", "app": "SketchUp 2026", "details": "Materials tray visibly showed Glass materials including Glass_Mirror_01 and Glass_Safety_1."}, {"start_s": 32557.898, "end_s": 32567.589, "action": "Zoomed and orbited out from the canopy to view the broader building model, then continued repositioning the camera around the separated building components.", "intent": "Review the canopy placement and overall model context.", "app": "SketchUp 2026", "details": "The view changed from a close canopy view to multiple building structures in the model space."}, {"start_s": 32567.589, "end_s": 32577.678, "action": "Orbited and zoomed back toward the rooftop canopy, inspecting its translucent roof panels and edge framing from close angles.", "intent": "Examine the canopy glazing and construction details.", "app": "SketchUp 2026", "details": "The canopy roof filled the viewport in progressively closer views."}, {"start_s": 32577.678, "end_s": 32588.425, "action": "Continued orbiting and zooming around the building exterior, moving from the canopy close-up to a wider building elevation; then hid or minimized the SketchUp window near the end of the span.", "intent": "Review the building exterior and change the application window state.", "app": "SketchUp 2026", "details": "The final visible view showed the multi-story building from the front before the application became hidden."}, {"start_s": 32588.425, "end_s": 32608.425, "action": "Returned to the SketchUp model view and navigated around the building with orbiting and zooming, moving from an elevated rear view to a closer front elevation with balconies, doors, and windows.", "intent": "Inspect exterior facade details from multiple viewpoints.", "app": "SketchUp 2026", "details": "The span contains continued camera navigation; no geometry edits are visibly confirmed."}, {"start_s": 32608.425, "end_s": 32618.5, "action": "Zoomed into the front facade and clicked repeatedly on wall and balcony areas while continuing slight view adjustments, ending on a close-up of the central wall and adjacent balconies.", "intent": "Inspect or select facade components at close range.", "app": "SketchUp 2026", "details": "Close views showed balcony glazing, doors, windows, and small wall fixtures; selection results are not clearly visible."}, {"start_s": 32618.5, "end_s": 32628.29, "action": "Clicked, scrolled, and adjusted the SketchUp camera around the building facade, moving from a close frontal view to a slightly wider angled view.", "intent": "Inspect the modeled facade from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32628.29, "end_s": 32638.126, "action": "Scrolled and middle-clicked to orbit and reposition the camera, revealing more of the upper facade and then moving into a closer angled view of the balconies and doors.", "intent": "Review the building geometry from alternate camera angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 32638.126, "end_s": 32648.526, "action": "Clicked and dragged on the model while repeatedly scrolling, then zoomed out to show most of the multi-story building and surrounding scene.", "intent": "Navigate and inspect the overall building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 32648.526, "end_s": 32658.145, "action": "Scrolled and orbited the camera around the building, then clicked repeatedly on facade geometry; the view ended zoomed closely on the central wall fixture with multiple edges highlighted.", "intent": "Inspect or select facade components for review.", "app": "SketchUp 2026", "details": null}, {"start_s": 32658.145, "end_s": 32667.576, "action": "Entered a character and used the Eraser tool to drag across selected facade edges, then scrolled and orbited away to a wider exterior view of the building.", "intent": "Erase or modify selected model edges and review the resulting geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32667.576, "end_s": 32677.583, "action": "Scrolled and middle-clicked repeatedly to orbit around the building, moving between close views of the balconies and a side/ground-level view before returning to the front facade.", "intent": "Inspect the building model from multiple exterior viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32677.583, "end_s": 32687.144, "action": "Orbit and zoom around the building facade, moving from a close view of a window and balcony toward a wider view of the model.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32687.144, "end_s": 32696.687, "action": "Zoom and orbit from the rooftop view toward the front facade, ending on a closer view of the stacked balconies, doors, and windows.", "intent": "Review the building facade and balcony arrangement.", "app": "SketchUp 2026", "details": null}, {"start_s": 32696.687, "end_s": 32706.489, "action": "Orbit and zoom around the rooftop structure, bringing a barred rooftop opening into close view and then lowering the view toward its base.", "intent": "Inspect the rooftop enclosure and surrounding geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32706.489, "end_s": 32716.515, "action": "Orbit around the rooftop enclosure and use the Push/Pull tool on selected faces, entering values with the keyboard and changing the visible geometry.", "intent": "Modify the selected rooftop structure faces.", "app": "SketchUp 2026", "details": null}, {"start_s": 32716.515, "end_s": 32725.973, "action": "Continue using Push/Pull on rooftop and wall faces while orbiting and zooming, extending selected surfaces and ending with a narrow side face selected for another adjustment.", "intent": "Refine the rooftop and adjacent wall geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32725.973, "end_s": 32736.273, "action": "Use Push/Pull on additional rooftop faces, drag a selected face, and orbit outward to review the rooftop enclosure and parapet from above.", "intent": "Continue modeling and inspect the updated rooftop geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32736.273, "end_s": 32746.402, "action": "Navigated around the SketchUp building model with repeated middle-click orbiting and scrolling, moving from a close rooftop gate view to a wider elevated view of the building and detached roof elements.", "intent": "Inspect the rooftop structure and overall building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32746.402, "end_s": 32756.36, "action": "Orbited and zoomed toward the rooftop gate structure, then clicked the roof area, leaving the rooftop perimeter and gate assembly selected in blue.", "intent": "Examine and select the rooftop area and gate assembly.", "app": "SketchUp 2026", "details": "The final view shows the rooftop slab, parapet, gate enclosure, and roof frame outlined in blue."}, {"start_s": 32756.36, "end_s": 32766.234, "action": "Changed the camera view substantially through orbiting and scrolling, then clicked model geometry and selected the upper building section, ending on an elevated exterior view with the roof perimeter highlighted.", "intent": "Review another side of the building and select the upper-level geometry.", "app": "SketchUp 2026", "details": "The view transitions from separated roof slabs to an exterior facade with the roof outline selected."}, {"start_s": 32766.234, "end_s": 32775.503, "action": "Typed a search character and space, manipulated the view with clicks, drags, and scrolling, and navigated from the roof exterior into an overhead interior view showing rooms, doors, windows, and the central stair/elevator area.", "intent": "Navigate through the model to inspect the building interior layout.", "app": "SketchUp 2026", "details": "The final view shows a cutaway floor plan with multiple rooms and a central stair structure."}, {"start_s": 32775.503, "end_s": 32785.433, "action": "Scrolled and orbited through the model, moving from the interior floor plan to a distant rooftop overview and then to an exterior front elevation featuring the rooftop gate and blue-glazed windows.", "intent": "Inspect the building exterior and rooftop feature from multiple scales.", "app": "SketchUp 2026", "details": null}, {"start_s": 32785.433, "end_s": 32794.713, "action": "Orbited and zoomed around the building, moving from the front exterior to a wider view of the floor layout and finally into a close-up of the central stairs and elevator enclosure, with the stair geometry selected in blue.", "intent": "Inspect the central circulation core and surrounding room layout.", "app": "SketchUp 2026", "details": "The final close view shows the central staircase and elevator enclosure outlined in blue, surrounded by rooms and doors."}, {"start_s": 32794.713, "end_s": 32805.02, "action": "Navigated around the SketchUp architectural model with repeated zooming and panning, then clicked within the stair area while a move operation was active.", "intent": "Inspect and reposition model geometry near the stairs.", "app": "SketchUp 2026", "details": "The view changed from a close stair/interior view to a tighter stair view; the move tool status and distance field remained visible."}, {"start_s": 32805.02, "end_s": 32814.441, "action": "Zoomed and panned out to review the overall model, clicked several areas, and ended with the building/site geometry selected in blue.", "intent": "Review and select broader model components.", "app": "SketchUp 2026", "details": "The camera moved from a close interior view to an aerial overview containing multiple building components and site outlines."}, {"start_s": 32814.441, "end_s": 32824.466, "action": "Navigated across the model with repeated zooming and panning, clicked the selected site/building geometry, and briefly dragged within the view.", "intent": "Inspect the arrangement of building components in the model.", "app": "SketchUp 2026", "details": "The view alternated between a distant site overview and a closer selected building/site layout."}, {"start_s": 32824.466, "end_s": 32834.578, "action": "Clicked and dragged on the selected model, zoomed and panned toward a stair component, and used additional clicks including a context-menu click.", "intent": "Inspect or manipulate the stair and surrounding site geometry.", "app": "SketchUp 2026", "details": "The view ended focused on an isolated stair assembly at the edge of the selected site outline."}, {"start_s": 32834.578, "end_s": 32844.708, "action": "Navigated back toward the building, selected a small room-like section, then zoomed and panned through the model to an exterior building view.", "intent": "Inspect individual building elements and the exterior model.", "app": "SketchUp 2026", "details": "The selected section appeared in blue before the view transitioned to a larger exterior facade and roof view."}, {"start_s": 32844.708, "end_s": 32857.729, "action": "Zoomed and panned away from the building, selected and manipulated an isolated stair assembly, and continued adjusting the view while a move operation remained active.", "intent": "Inspect and reposition the isolated stair geometry.", "app": "SketchUp 2026", "details": "The final view showed the stair assembly isolated in the workspace with a move-tool distance readout."}, {"start_s": 32857.729, "end_s": 32867.829, "action": "Orbit and zoom around the SketchUp building model while keeping the selected staircase and rooftop structure visible.", "intent": "Inspect the upper exterior and selected stair assembly from different angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 32867.829, "end_s": 32879.035, "action": "Orbit and zoom rapidly from the upper building toward a close view of the blue-glazed doors and then back out to an exterior building view.", "intent": "Review the building facade and door/window area from multiple scales.", "app": "SketchUp 2026", "details": null}, {"start_s": 32879.035, "end_s": 32887.633, "action": "Orbit and zoom out to show the building and a detached model section, then select and begin moving a long blue-outlined component.", "intent": "Inspect separated model components and reposition or assess the selected component.", "app": "SketchUp 2026", "details": null}, {"start_s": 32887.633, "end_s": 32897.457, "action": "Continue orbiting and zooming around the selected component and upper-floor walls, then move the view to an overhead layout showing the room plan and detached roof slabs.", "intent": "Inspect the upper-floor arrangement and detached roof geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32897.457, "end_s": 32906.944, "action": "Orbit and zoom across the upper-floor rooms and facade while keeping a long blue-outlined component selected and adjusting its position or view.", "intent": "Examine the selected exterior component in relation to the upper-floor layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 32906.944, "end_s": 32916.987, "action": "Orbit around the upper-floor exterior, click and drag the selected roof-edge or parapet geometry, and finish on a close angled view of the blue-outlined roof perimeter.", "intent": "Inspect or adjust the selected upper-level perimeter geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 32916.987, "end_s": 32926.928, "action": "Selected the rooftop parapet geometry, initiated a move, and navigated the 3D view with orbit/zoom gestures while adjusting the selected element.", "intent": "Position or inspect the selected rooftop parapet element.", "app": "SketchUp 2026", "details": "The model remained in an active move state with a distance readout visible."}, {"start_s": 32926.928, "end_s": 32937.067, "action": "Orbited and zoomed around the building, selected rooftop/parapet geometry, and continued manipulating the selected components in the 3D view.", "intent": "Inspect and adjust rooftop geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The rooftop slab and perimeter parapet remained highlighted in blue."}, {"start_s": 32937.067, "end_s": 32946.841, "action": "Navigated around the selected roof edge using orbit and zoom gestures, then clicked the rooftop/parapet geometry to continue the edit.", "intent": "Review and refine the rooftop perimeter geometry.", "app": "SketchUp 2026", "details": "The selected roof assembly stayed highlighted while the camera moved to exterior views."}, {"start_s": 32946.841, "end_s": 32956.874, "action": "Orbited and zoomed from a close roof view to a wider exterior view, selected the roof-edge assembly, and continued moving or positioning it.", "intent": "Inspect and position the roof-edge/parapet assembly.", "app": "SketchUp 2026", "details": "The selected geometry remained blue-highlighted and the move tool distance field was visible."}, {"start_s": 32956.874, "end_s": 32966.855, "action": "Orbited and zoomed around the building exterior, selected a roof-edge component, and continued manipulating it while changing viewpoints.", "intent": "Adjust or inspect the roof-edge component in context.", "app": "SketchUp 2026", "details": "The view shifted from a facade close-up to the underside and edge of the roof assembly."}, {"start_s": 32966.855, "end_s": 32976.61, "action": "Zoomed into the roof-edge corner, selected the parapet geometry, and continued a move operation along the highlighted edge.", "intent": "Fine-tune the position of the selected roof-edge geometry.", "app": "SketchUp 2026", "details": "The final view showed a close-up of the selected corner with the move tool and distance readout active."}, {"start_s": 32976.61, "end_s": 32987.573, "action": "Orbit and zoom around the apartment building model, changing from a close front view to a wider angled view and leaving a long horizontal element selected in blue.", "intent": "Inspect the building model and selected architectural element from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 32987.573, "end_s": 32997.748, "action": "Zoom and orbit closely around the selected upper wall or roof-edge geometry, then move to an adjacent wall surface and clear the selection.", "intent": "Examine architectural geometry at close range.", "app": "SketchUp 2026", "details": null}, {"start_s": 32997.748, "end_s": 33007.635, "action": "Continue orbiting and zooming around the model, moving from a close wall view to the roof edge and ending with roof or wall geometry outlined in blue.", "intent": "Inspect another portion of the building exterior.", "app": "SketchUp 2026", "details": null}, {"start_s": 33007.635, "end_s": 33019.228, "action": "Type the SketchUp shortcut for the measurement tool, orbit and zoom around the roof and upper-floor structure, and end on a wider view showing the apartment building and a separate low structure.", "intent": "Navigate and inspect the overall model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 33019.228, "end_s": 33029.773, "action": "Orbit and zoom toward the apartment building\u2019s front elevation, briefly drag across model geometry, and finish with the lower exterior and ground-level area selected in blue.", "intent": "Inspect and select the building\u2019s lower exterior geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 33029.773, "end_s": 33039.981, "action": "Orbit and zoom out while dragging the selected lower structure, briefly invoking a copy or move operation, then leave the model in a wider scene view with the apartment building, detached lower structure, and separate low building visible.", "intent": "Reposition or copy the selected lower structure and review the placement in the overall scene.", "app": "SketchUp 2026", "details": null}, {"start_s": 33039.981, "end_s": 33051.175, "action": "Scrolled through the SketchUp scene and adjusted the 3D view around the multi-story building and adjacent structures using middle-click navigation.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 33051.175, "end_s": 33064.257, "action": "Navigated the SketchUp camera upward and around the model, moving from the building exterior to a rooftop-level view, then zoomed back out to show the separated structures.", "intent": "Review the rooftop and overall model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 33064.257, "end_s": 33073.799, "action": "Adjusted the camera around the scene, selected the small stair-like object, and dragged it while the Move tool was active; then continued navigating the view.", "intent": "Position or inspect the selected model component.", "app": "SketchUp 2026", "details": null}, {"start_s": 33073.799, "end_s": 33087.0, "action": "Scrolled to change the camera distance and angle, bringing the multi-story building and neighboring structures into a closer exterior view.", "intent": "Inspect the exterior model from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 33087.0, "end_s": 33098.364, "action": "Continued orbiting and zooming around the SketchUp model, moving from a close view of the adjacent building facade back to an elevated view of the main building and surrounding structures.", "intent": "Review the modeled buildings and facade details.", "app": "SketchUp 2026", "details": "System configuration and network-related status changes occurred during the span."}, {"start_s": 33098.364, "end_s": 33109.392, "action": "Switched from SketchUp to Microsoft Edge, changed to a new tab, and typed and submitted the search query \u201cmarble teexture.\u201d", "intent": "Search the web for a marble texture.", "app": "Microsoft Edge", "details": "The prior Edge tab showed 3D Warehouse search results for \u201cgrill iron door.\u201d"}, {"start_s": 33109.392, "end_s": 33118.425, "action": "Revealed Microsoft Edge, adjusted the window, reviewed the Bing results for \u201cmarble texture,\u201d and clicked the search field.", "intent": "Prepare to refine the marble texture image search.", "app": "Microsoft Edge", "details": "Bing results page with marble texture images visible."}, {"start_s": 33118.425, "end_s": 33128.619, "action": "Edited the Bing search query to \u201cmarble texture on wall design\u201d and submitted it.", "intent": "Search for marble textures intended for wall design.", "app": "Microsoft Edge", "details": "Bing loaded results for the refined query."}, {"start_s": 33128.619, "end_s": 33138.845, "action": "Scrolled through the web results, opened the Images view, and continued reviewing the marble wall design image grid.", "intent": "Browse visual examples of marble wall textures.", "app": "Microsoft Edge", "details": "Bing Images displayed marble wall design results."}, {"start_s": 33138.845, "end_s": 33148.129, "action": "Scrolled through the image results, selected the search field, replaced the query with \u201cmarble texture on elevation,\u201d and submitted it.", "intent": "Refine the image search toward elevation designs.", "app": "Microsoft Edge", "details": "Bing Images loaded results for marble texture on elevation."}, {"start_s": 33148.129, "end_s": 33158.251, "action": "Scrolled through the \u201cmarble texture on elevation\u201d image results and reviewed additional wall and stone texture examples.", "intent": "Inspect candidate elevation-related marble textures.", "app": "Microsoft Edge", "details": "Image results and related searches were visible."}, {"start_s": 33158.251, "end_s": 33168.109, "action": "Edited the query to \u201cmarble texture on elevation white,\u201d submitted it, reviewed the white marble image results, then began another query by entering \u201cglossy.\u201d", "intent": "Narrow the search to glossy white marble elevation textures.", "app": "Microsoft Edge", "details": "Bing Images showed white marble results; the final glossy query was entered."}, {"start_s": 33168.109, "end_s": 33178.088, "action": "Scrolled through Bing Images results for \u201cmarble texture on elevation white glossy,\u201d reviewing white marble texture thumbnails and related suggestions.", "intent": "Review candidate marble texture images.", "app": "Microsoft Edge", "details": null}, {"start_s": 33178.088, "end_s": 33188.126, "action": "Scrolled further through the Bing Images results, moving among additional white marble and seamless texture thumbnails before returning to the earlier results view.", "intent": "Continue browsing marble texture references.", "app": "Microsoft Edge", "details": null}, {"start_s": 33188.126, "end_s": 33198.196, "action": "Clicked the Bing search box and edited the query by typing and deleting text, leaving an autocomplete list open with variations of the marble texture search.", "intent": "Refine the image search query.", "app": "Microsoft Edge", "details": "The visible query was temporarily altered to include \u201cas\u201d."}, {"start_s": 33198.196, "end_s": 33208.821, "action": "Completed the query edit to \u201cmarble texture asian on elevation white glossy,\u201d submitted it, and scrolled through the refreshed Bing Images results showing Asian white marble references.", "intent": "Search for Asian marble texture examples.", "app": "Microsoft Edge", "details": null}, {"start_s": 33208.821, "end_s": 33224.576, "action": "Edited the search query again to add \u201cpaints,\u201d submitted \u201cmarble texture asian paints on elevation white glossy,\u201d and browsed the resulting image grid with scrolling and clicks on image results.", "intent": "Find Asian Paints marble or wall-texture references.", "app": "Microsoft Edge", "details": "An image result was opened in Bing\u2019s preview before the save dialog appeared."}, {"start_s": 33224.576, "end_s": 33234.966, "action": "Opened the Save As dialog for the selected image, kept the Desktop location and the filename \u201cwall-texture-paint-500x500,\u201d and interacted with the dialog without confirming the save.", "intent": "Prepare to save the selected texture image.", "app": "Microsoft Edge", "details": "Save As showed WEBP File format and the Save button remained available."}, {"start_s": 33234.966, "end_s": 33239.275, "action": "Switched to Microsoft Edge, viewed the Bing image result for a white marble wall texture, and resized the browser window before clicking near the downloads panel.", "intent": "Review a downloaded marble texture image from the search results.", "app": "Microsoft Edge", "details": "The Downloads panel showed wall-texture-paint.webp."}, {"start_s": 33239.275, "end_s": 33255.094, "action": "Opened File Explorer and navigated to the Desktop, then opened wall-texture-paint.webp in Photos and initiated a save operation.", "intent": "Open and save the downloaded texture image locally.", "app": "File Explorer and Photos", "details": "Photos displayed wall-texture-paint.webp while File Explorer showed the Desktop."}, {"start_s": 33255.094, "end_s": 33259.756, "action": "Used the Save As dialog on the Desktop, edited the filename field, and clicked Save; the image returned to Photos as wall-texture-paint 1.jpg.", "intent": "Save a JPEG copy of the texture with a new filename.", "app": "Photos", "details": "The dialog showed JPEG as the file type and a filename beginning wall-texture-paint."}, {"start_s": 33259.756, "end_s": 33264.217, "action": "Closed or minimized the Photos and File Explorer windows, returned briefly to Microsoft Edge, and resized the windows.", "intent": "Finish the image-saving workflow and return to the browser.", "app": "Windows desktop", "details": null}, {"start_s": 33264.217, "end_s": 33270.1, "action": "Switched to SketchUp, activated the materials workflow, opened the Default Tray Materials panel, and selected the Glass material controls.", "intent": "Prepare a SketchUp material for editing or applying a texture.", "app": "SketchUp", "details": "The model view showed the building model and the Materials panel showed Glass_Safety_1."}, {"start_s": 33270.1, "end_s": 33278.947, "action": "Opened the Create Material image chooser, selected wall-texture-paint 1 from the Desktop, and clicked Open.", "intent": "Use the saved marble texture as an image for the SketchUp material.", "app": "SketchUp", "details": "The Choose Image dialog highlighted wall-texture-paint 1 while the Create Material dialog remained open behind it."}, {"start_s": 33278.947, "end_s": 33283.956, "action": "Switched between the Choose Image and Create Material dialogs in SketchUp, then clicked the dialog\u2019s lower-right control to return to the model.", "intent": "Finish creating or applying a material.", "app": "SketchUp", "details": "Create Material dialog showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 33283.956, "end_s": 33293.906, "action": "Closed the material dialog, selected Material3 in the Materials tray, zoomed toward the building facade, and positioned the paint tool over the wall.", "intent": "Prepare to apply the selected material to the building.", "app": "SketchUp", "details": "Material3 remained selected in the Materials tray while the camera moved closer."}, {"start_s": 33293.906, "end_s": 33303.798, "action": "Clicked the facade to apply the textured material, then used the Tape Measure tool and placed a guide across the wall while entering measurements.", "intent": "Apply the wall texture and establish a measurement guide.", "app": "SketchUp", "details": "The central facade changed from plain white to a repeating light texture before the guide was created."}, {"start_s": 33303.798, "end_s": 33313.851, "action": "Exited the guide operation, opened the material edit controls, and edited the texture dimensions, leaving the facade visible with Material3 selected.", "intent": "Adjust the applied texture scale.", "app": "SketchUp", "details": "Material edit fields showed wall-texture-paint 1.jpg and a visible texture size entry."}, {"start_s": 33313.851, "end_s": 33324.56, "action": "Updated the texture dimensions to approximately 15 feet by 10 feet, then orbited and zoomed the model into a close-up of the textured wall and window.", "intent": "Refine texture sizing and inspect the result.", "app": "SketchUp", "details": "The material panel displayed 15' and 10' dimensions; the final view was tightly zoomed on the textured surface."}, {"start_s": 33324.56, "end_s": 33334.332, "action": "Continued orbiting and zooming around the textured wall and window area, moving the camera into an interior or recessed section while keeping Material3 active.", "intent": "Inspect the texture application from additional viewpoints.", "app": "SketchUp", "details": "The view ended on a close-up of a framed opening, gray floor, and textured wall surfaces."}, {"start_s": 33334.332, "end_s": 33344.112, "action": "Navigated around the SketchUp building model with clicks, scrolling, and orbiting, then interacted with the visible facade and material-painted wall area.", "intent": "Inspect and adjust the 3D model view and facade materials.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 33344.112, "end_s": 33355.227, "action": "Selected the Paint Bucket tool, clicked the building facade, and navigated closer to inspect the vent-like wall feature and surrounding surface.", "intent": "Apply or inspect a material on the building facade.", "app": "SketchUp 2026", "details": "The facade surface remained visibly textured while the Materials tray stayed open."}, {"start_s": 33355.227, "end_s": 33361.259, "action": "Orbit- and zoomed around the building exterior, moving from an elevated overview to a closer frontal view of multiple balconies, doors, windows, and textured wall panels.", "intent": "Review the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "The model was shown in a front-facing exterior view by the end of the span."}, {"start_s": 33361.259, "end_s": 33371.255, "action": "Scrolled to reframe the building, then clicked the Paint Bucket tool and adjusted the view to show the full front elevation and ground area.", "intent": "Inspect the facade and prepare for further material interaction.", "app": "SketchUp 2026", "details": "The Materials tray remained visible with Material3 selected."}, {"start_s": 33371.255, "end_s": 33378.944, "action": "Zoomed and navigated toward an upper facade panel, selected the wall surface and nearby vent-like feature, and left the textured panel outlined in blue.", "intent": "Select and inspect a specific facade surface or component.", "app": "SketchUp 2026", "details": "The selected upper wall panel and small rectangular feature were shown in close view."}, {"start_s": 33378.944, "end_s": 33389.062, "action": "Scrolled and adjusted the camera around the selected facade, then clicked the upper wall and vent-like feature while continuing close inspection.", "intent": "Refine the view and interact with the selected facade area.", "app": "SketchUp 2026", "details": "The final view focused closely on the textured wall panel, adjacent door and window, and rectangular vent-like element."}, {"start_s": 33389.062, "end_s": 33398.778, "action": "Selected and manipulated a textured horizontal wall section, using clicks, drags, and view scrolling while the Materials tray remained open.", "intent": "Adjust or inspect the textured wall element in the building model.", "app": "SketchUp 2026", "details": "The selected surface became highlighted with a stippled pattern."}, {"start_s": 33398.778, "end_s": 33408.014, "action": "Activated the Paint Bucket tool, applied or sampled material on the selected wall section, and navigated to a wider front view of the building.", "intent": "Apply or inspect the wall material across the model.", "app": "SketchUp 2026", "details": "The Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 33408.014, "end_s": 33418.007, "action": "Zoomed and panned around the building facade, using the Paint Bucket tool and selecting areas near the central wall and vent detail before moving to a close-up of the upper wall.", "intent": "Inspect or refine material placement on facade surfaces.", "app": "SketchUp 2026", "details": "Views shifted from the central facade to a close-up of a textured wall and vent."}, {"start_s": 33418.007, "end_s": 33427.878, "action": "Orbited and panned around the building corner while clicking and dragging on facade and balcony areas, then changed to an angled view of the textured wall and adjacent balcony.", "intent": "Review the applied facade material from different viewpoints.", "app": "SketchUp 2026", "details": "The model view moved from a side elevation to an oblique facade view."}, {"start_s": 33427.878, "end_s": 33436.355, "action": "Used the Paint Bucket tool and view navigation to inspect the textured horizontal band, then zoomed out to show the front and side of the building.", "intent": "Verify material appearance across the building facade.", "app": "SketchUp 2026", "details": "The final view showed multiple floors, balconies, and the textured central facade."}, {"start_s": 33436.355, "end_s": 33445.98, "action": "Orbited and zoomed around the building, moving from a close-up of the central textured wall to a broader upper-side perspective with balconies, doors, windows, and vents visible.", "intent": "Review the completed facade model and material placement from additional angles.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Material3 and wall-texture-paint 1.jpg visible."}, {"start_s": 33445.98, "end_s": 33461.608, "action": "Scrolled through the SketchUp building model view while keeping the Materials tray open.", "intent": "Review the model from the current viewpoint.", "app": "SketchUp 2026", "details": "Material3 with wall-texture-paint 1.jpg remained visible in the Materials tray."}, {"start_s": 33461.608, "end_s": 33471.63, "action": "Scrolled and used middle-click navigation to move from a close fa\u00e7ade view to a wider exterior view of the building.", "intent": "Inspect the building exterior from different zoom levels.", "app": "SketchUp 2026", "details": "The multi-story building, balconies, doors, roof, and adjacent structure became visible in the wider view."}, {"start_s": 33471.63, "end_s": 33482.287, "action": "Used middle-click orbiting and scrolling to rotate around the building, exposing the opposite fa\u00e7ade and a detached adjacent structure.", "intent": "Review additional exterior sides of the model.", "app": "SketchUp 2026", "details": "The model was shown from a rear/side angle with the detached structure to the right."}, {"start_s": 33482.287, "end_s": 33491.925, "action": "Scrolled and middle-click navigated from the exterior overview into a close-up of a balcony, door, tiled floor, and wall surface.", "intent": "Inspect detailed exterior elements and surfaces.", "app": "SketchUp 2026", "details": "The view ended extremely close to the ground-level balcony and adjacent wall."}, {"start_s": 33491.925, "end_s": 33501.695, "action": "Clicked and dragged over the model while scrolling, then navigated to another close fa\u00e7ade view showing textured walls, balconies, and a vent.", "intent": "Continue inspecting or positioning the model for surface work.", "app": "SketchUp 2026", "details": "The Materials tray remained open and the model view shifted from a front lower section to a side wall."}, {"start_s": 33501.695, "end_s": 33512.98, "action": "Scrolled extensively and used middle-click navigation to move upward around the building, ending on a close view of the upper fa\u00e7ade and rooftop parapet.", "intent": "Inspect the upper exterior and rooftop elements.", "app": "SketchUp 2026", "details": "The final view showed the textured upper wall, doors, balconies, rooftop parapet, and vertical rooftop feature."}, {"start_s": 33512.98, "end_s": 33525.362, "action": "Clicked in the SketchUp viewport and scrolled repeatedly to pull back from a close view of the building facade to a wider exterior view.", "intent": "Inspect the model from a broader viewpoint.", "app": "SketchUp 2026", "details": "Materials tray remained open on the right."}, {"start_s": 33525.362, "end_s": 33535.281, "action": "Pressed repeated keyboard shortcuts, changing the viewport to a more distant, semi-transparent overview of the building.", "intent": "Adjust the model view using keyboard navigation.", "app": "SketchUp 2026", "details": null}, {"start_s": 33535.281, "end_s": 33553.02, "action": "Clicked and dragged in the viewport, then pressed repeated navigation shortcuts to orbit and adjust the camera around the building exterior.", "intent": "Refine the exterior inspection angle.", "app": "SketchUp 2026", "details": "The view progressed from a translucent overview to a clearer angled facade view."}, {"start_s": 33553.02, "end_s": 33563.58, "action": "Selected viewport tools and navigated with clicks, drags, and scrolls, zooming toward the central facade and changing to a close front-facing view.", "intent": "Examine the central facade more closely.", "app": "SketchUp 2026", "details": "The central wall, vents, doors, and balconies became prominent."}, {"start_s": 33563.58, "end_s": 33574.127, "action": "Scrolled and used middle-button navigation to zoom out and orbit upward around the model, moving from the facade to a wider view of the upper floors and rooftop.", "intent": "Inspect the building massing and roof area.", "app": "SketchUp 2026", "details": "The rooftop terrace and vertical rooftop structure were visible."}, {"start_s": 33574.127, "end_s": 33583.222, "action": "Clicked and scrolled repeatedly to adjust the camera around the upper facade and roof, then dragged in the viewport to settle on a wider elevated front view.", "intent": "Finalize an elevated inspection view of the building.", "app": "SketchUp 2026", "details": "The final view showed the rooftop, upper facade, balconies, and surrounding selection bounds."}, {"start_s": 33583.222, "end_s": 33600.154, "action": "Scrolled and zoomed out from a close front view of the building, then clicked in the model area.", "intent": "Adjust the model view for inspection.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Material3 selected."}, {"start_s": 33600.154, "end_s": 33610.163, "action": "Rotated and adjusted the camera around the building using middle-click navigation and repeated drags, ending on an elevated front-right view.", "intent": "Inspect the building model from another angle.", "app": "SketchUp 2026", "details": "The upper front facade and rooftop remained visible."}, {"start_s": 33610.163, "end_s": 33618.184, "action": "Dragged and rotated the view downward and around the model, bringing the lower facade, balconies, and front ground area into view.", "intent": "Inspect the lower exterior of the building.", "app": "SketchUp 2026", "details": "The view ended focused on the lower front facade and tiled entrance area."}, {"start_s": 33618.184, "end_s": 33628.778, "action": "Pressed the undo shortcut repeatedly, changing the visible model state and leaving the lower facade partially faded or selected.", "intent": "Undo recent modeling or view-related changes.", "app": "SketchUp 2026", "details": "No menus or dialogs appeared."}, {"start_s": 33628.778, "end_s": 33638.944, "action": "Dragged and navigated the camera upward and closer, then switched to orbit navigation and rotated to a more frontal elevated view of the upper facade.", "intent": "Refine the inspection viewpoint of the building exterior.", "app": "SketchUp 2026", "details": "The final view showed the upper floors, balconies, rooftop edge, and neighboring structure."}, {"start_s": 33638.944, "end_s": 33648.763, "action": "Orbited and zoomed around the front facade, moving from an elevated close view to a centered view of the upper and middle floors.", "intent": "Continue inspecting the building facade from centered angles.", "app": "SketchUp 2026", "details": "The Materials tray stayed open and the model remained in SketchUp."}, {"start_s": 33648.763, "end_s": 33659.434, "action": "Navigated around the SketchUp building model with repeated middle-clicks and scrolls, orbiting from a frontal view toward an upper side perspective and briefly dragging near the lower model area.", "intent": "Inspect the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Material3 selected."}, {"start_s": 33659.434, "end_s": 33668.055, "action": "Continued orbiting and zooming around the building, moving from an elevated overview to a close-up of the facade and balcony area.", "intent": "Examine facade and balcony geometry at different scales.", "app": "SketchUp 2026", "details": "No confirmed geometry edit was visible."}, {"start_s": 33668.055, "end_s": 33678.069, "action": "Adjusted the camera repeatedly with middle-clicks and scrolls, shifting from a front elevation to a close side view of the balconies, doors, and windows.", "intent": "Review exterior details from alternate angles.", "app": "SketchUp 2026", "details": "The model remained in SketchUp's modeling viewport."}, {"start_s": 33678.069, "end_s": 33685.985, "action": "Zoomed and orbited across the upper facade, then typed 'r' and activated a drawing tool; positioned the cursor on the upper facade with a rectangle-like preview and visible inference points.", "intent": "Begin placing or drawing a facade element on the building model.", "app": "SketchUp 2026", "details": "The status bar showed a drawing operation with dimensions."}, {"start_s": 33685.985, "end_s": 33695.129, "action": "Continued navigating around the model while the drawing tool remained active, changing from a roof-level view to a side view of the lower balcony and tiled area.", "intent": "Position and inspect the in-progress facade drawing from another viewpoint.", "app": "SketchUp 2026", "details": "System connectivity and power status changed during the span; no confirmed completion of the drawing was visible."}, {"start_s": 33695.129, "end_s": 33705.864, "action": "Zoomed and orbited to a wider front-side view, clicked an endpoint on the model, typed a space, and then clicked repeatedly on the lower facade/tile area; the final view showed selected edges and a highlighted rectangular face region.", "intent": "Continue editing or selecting the facade geometry near the building base.", "app": "SketchUp 2026", "details": "The viewport displayed an 'Endpoint in Group' inference before the final selection."}, {"start_s": 33705.864, "end_s": 33715.811, "action": "Scrolled and adjusted the SketchUp view, opened a context menu on the building facade, then selected the facade and orbited the model.", "intent": "Inspect and manipulate the selected facade geometry.", "app": "SketchUp 2026", "details": "The Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 33715.811, "end_s": 33725.759, "action": "Entered and corrected a numeric distance value, confirmed it, and applied the operation to the selected facade while repositioning the view.", "intent": "Set a precise distance for the active SketchUp modeling operation.", "app": "SketchUp 2026", "details": "The active tool displayed a distance field and the facade remained selected."}, {"start_s": 33725.759, "end_s": 33736.782, "action": "Scrolled and orbited around the building, selected a small facade rectangle, and changed the view until the isolated rectangular face was shown.", "intent": "Inspect or edit a specific facade element.", "app": "SketchUp 2026", "details": "The final evidence showed an isolated outlined rectangular face."}, {"start_s": 33736.782, "end_s": 33746.831, "action": "Used keyboard shortcuts and clicks while zooming and navigating from the isolated face back to the building rooftop and facade.", "intent": "Continue editing and inspect the building element in context.", "app": "SketchUp 2026", "details": "The building facade was visible with a large central panel selected."}, {"start_s": 33746.831, "end_s": 33755.573, "action": "Zoomed into the selected geometry, drew or adjusted a rectangular detail, and applied a modeling operation that produced a small three-part rectangular panel.", "intent": "Create or modify a facade detail.", "app": "SketchUp 2026", "details": "The final view showed the small rectangular panel divided into one large and two smaller sections."}, {"start_s": 33755.573, "end_s": 33765.549, "action": "Scrolled and orbited around the close-up panel, then clicked it while keeping the faces selected.", "intent": "Inspect the completed panel detail from different angles.", "app": "SketchUp 2026", "details": "The close-up showed the panel's three selected faces beneath a surrounding surface."}, {"start_s": 33765.549, "end_s": 33775.978, "action": "Scrolled and clicked in the SketchUp model, changing the view from a close-up wall panel to an elevated view of the building.", "intent": "Navigate and inspect the 3D model.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Material3 selected."}, {"start_s": 33775.978, "end_s": 33785.932, "action": "Scrolled and orbited around the building, then clicked and dragged in the model to adjust the camera toward the upper facade and roof.", "intent": "Inspect the building exterior from different angles.", "app": "SketchUp 2026", "details": "The view shifted from a distant wall panel to a close-up of the roof edge, facade, door, and window."}, {"start_s": 33785.932, "end_s": 33795.065, "action": "Scrolled and orbited around the facade, then clicked and dragged to adjust the camera closer to the central exterior wall.", "intent": "Review the facade geometry and placement.", "app": "SketchUp 2026", "details": "A large central wall with balconies, doors, and windows remained visible; the Materials tray stayed open."}, {"start_s": 33795.065, "end_s": 33805.32, "action": "Scrolled and orbited upward around the building, selected the large central wall face, and activated a face-editing tool; typed a single character while working on the selection.", "intent": "Select and modify the central exterior face.", "app": "SketchUp 2026", "details": "The selected face was highlighted with a dotted pattern, and the status bar showed face-setting or distance-entry instructions."}, {"start_s": 33805.32, "end_s": 33817.418, "action": "Scrolled and orbited around the selected wall, then entered 2 inches and confirmed it, changing the view to a wider elevated perspective of the building.", "intent": "Apply a dimensional edit to the selected face.", "app": "SketchUp 2026", "details": "The large wall face remained selected during the edit, with a distance value visible in the status area."}, {"start_s": 33817.418, "end_s": 33827.438, "action": "Scrolled and orbited to review the building, used undo commands, and clicked several times on the central wall and its small rectangular features.", "intent": "Review or refine the recent wall edit.", "app": "SketchUp 2026", "details": "The camera moved from a full-building view to a close-up of the central facade; the Materials tray remained open."}, {"start_s": 33827.438, "end_s": 33837.5, "action": "Scrolled extensively through the SketchUp model, clicked visible facade elements, and zoomed into the wall and vent area while the Materials tray remained open.", "intent": "Inspect the building facade and material-covered wall surfaces.", "app": "SketchUp 2026", "details": "The view changed from a close wall view to a close-up of selected blue-gray facade panels."}, {"start_s": 33837.5, "end_s": 33847.195, "action": "Continued navigating around the model with repeated scrolling and middle-button view adjustments, moving from a close facade view to a wider upper-floor perspective.", "intent": "Review the exterior building geometry from different viewpoints.", "app": "SketchUp 2026", "details": "A middle-floor facade section was briefly outlined in blue before the view shifted upward."}, {"start_s": 33847.195, "end_s": 33857.032, "action": "Typed \u201cr,\u201d navigated the model, then clicked and dragged on the upper facade to begin drawing or positioning a rectangular element.", "intent": "Create or modify a rectangular facade feature.", "app": "SketchUp 2026", "details": "The Rectangle tool was active, with a first corner and in-progress green outline visible on the wall."}, {"start_s": 33857.032, "end_s": 33868.29, "action": "Adjusted the view with middle-button navigation and scrolling, then clicked near the lower-right facade and continued the active drawing operation.", "intent": "Continue positioning the facade rectangle while inspecting its placement.", "app": "SketchUp 2026", "details": "The active rectangle outline and dimensions remained visible near the balcony and tiled ground area."}, {"start_s": 33868.29, "end_s": 33877.748, "action": "Typed a space, clicked repeatedly, and orbited/zoomed out to inspect the building exterior from wider angles, ending with the central facade selected.", "intent": "Review the modeled facade feature in the overall building context.", "app": "SketchUp 2026", "details": "The view progressed from a close balcony corner to a wide building perspective and then a front-facing selected central wall."}, {"start_s": 33877.748, "end_s": 33887.666, "action": "Scrolled to zoom in on the selected central facade panels.", "intent": "Inspect the selected facade surfaces more closely.", "app": "SketchUp 2026", "details": "The selected central wall filled most of the viewport, with adjacent windows, doors, balconies, and rooftop elements visible."}, {"start_s": 33887.666, "end_s": 33898.141, "action": "Scrolled through the SketchUp model view and briefly invoked an undo-like keyboard command while inspecting the selected textured facade.", "intent": "Inspect or adjust the building model view.", "app": "SketchUp 2026", "details": "The front facade remained selected, with the Materials tray showing Material3 and wall-texture-paint 1.jpg."}, {"start_s": 33898.141, "end_s": 33907.055, "action": "Scrolled and orbited around the building, then clicked and changed the view to an exterior corner perspective.", "intent": "Review the building exterior from different angles.", "app": "SketchUp 2026", "details": "The model changed from a front/top view to a broader corner view; the Materials tray remained open."}, {"start_s": 33907.055, "end_s": 33916.983, "action": "Scrolled and orbited closer around the upper facade, clicked near the wall, and ended on a higher three-quarter view of the building.", "intent": "Inspect facade surfaces and details from another angle.", "app": "SketchUp 2026", "details": "The view moved across a close wall and rooftop area, then pulled back to show the roof, balconies, and multiple floors."}, {"start_s": 33916.983, "end_s": 33927.196, "action": "Scrolled, clicked and dragged across the model, and navigated downward through the facade to inspect lower floors and the ground-level area.", "intent": "Examine the building facade and lower exterior elements.", "app": "SketchUp 2026", "details": "The view progressed from an upper textured wall to lower floors, balconies, doors, and the tiled entrance area."}, {"start_s": 33927.196, "end_s": 33936.742, "action": "Repeatedly orbited and scrolled around the building, moving from a full exterior view into a close-up of a textured wall and vent detail, then back to a wider perspective.", "intent": "Inspect exterior materials and architectural details.", "app": "SketchUp 2026", "details": "The close-up showed the wall texture and a rectangular vent; the final view showed most of the building and site boundary."}, {"start_s": 33936.742, "end_s": 33946.094, "action": "Scrolled and orbited around the upper corner, clicked and dragged on the facade, and finished with a close view of the textured wall, door, window, balcony, and vent.", "intent": "Review the applied wall material and nearby facade details.", "app": "SketchUp 2026", "details": "The Materials tray displayed Material3 using wall-texture-paint 1.jpg while the camera moved between wider and close facade views."}, {"start_s": 33946.094, "end_s": 33955.53, "action": "Scrolled and zoomed the SketchUp camera toward the building facade, moving from a wider upper-floor view to a close view of the textured wall, balcony, door, and window.", "intent": "Inspect the facade geometry and material closely.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 33955.53, "end_s": 33965.762, "action": "Activated the Paint Bucket tool and navigated the camera around the facade, zooming between the full front elevation and a close-up of the textured wall.", "intent": "Prepare or inspect material painting on facade surfaces.", "app": "SketchUp 2026", "details": "The Paint Bucket tool was active and the textured wall remained visible."}, {"start_s": 33965.762, "end_s": 33976.28, "action": "Adjusted the camera through several zoom and pan movements, reviewing multiple stacked floors, balconies, doors, windows, and textured wall panels.", "intent": "Review the facade across multiple floors.", "app": "SketchUp 2026", "details": "No clearly supported geometry edit was visible; the model view changed substantially."}, {"start_s": 33976.28, "end_s": 33985.309, "action": "Scrolled and clicked repeatedly while the Paint Bucket tool remained active, moving from a mid-facade view to a close-up of the wall and small vent-like detail.", "intent": "Inspect or apply the selected material on facade elements.", "app": "SketchUp 2026", "details": "The Materials tray continued to show Material3 and wall-texture-paint 1.jpg."}, {"start_s": 33985.309, "end_s": 33995.505, "action": "Navigated around the building with repeated clicks and scrolls, briefly selecting facade geometry and ending on a close view of a textured wall panel with a vent.", "intent": "Examine facade surfaces and material boundaries.", "app": "SketchUp 2026", "details": "Selected edges appeared blue in the final view, indicating highlighted geometry."}, {"start_s": 33995.505, "end_s": 34005.757, "action": "Clicked and dragged across facade geometry, scrolled and repositioned the camera upward, and selected upper roof or parapet edges, ending on a close upper-facade view.", "intent": "Inspect and select upper facade or roof geometry.", "app": "SketchUp 2026", "details": "Blue outlines marked selected parapet and roof-related edges in the final screenshot."}, {"start_s": 34005.757, "end_s": 34011.93, "action": "Navigated the SketchUp building model with clicks, scrolling, and middle-button orbiting, moving from a close upper-floor view to a centered front elevation.", "intent": "Inspect and adjust the 3D model viewpoint.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Material3 selected."}, {"start_s": 34011.93, "end_s": 34021.71, "action": "Scrolled and orbited around the model, zooming out to show the full front facade and then moving toward an angled close view of the building.", "intent": "Review the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": "The facade shows multiple floors, balconies, doors, windows, and textured wall panels."}, {"start_s": 34021.71, "end_s": 34031.868, "action": "Scrolled through several views and orbited around the building, ending on a wider three-quarter view that includes the entrance area and adjacent structures.", "intent": "Inspect the building exterior and surrounding geometry.", "app": "SketchUp 2026", "details": "No geometry or material edits were visibly made."}, {"start_s": 34031.868, "end_s": 34039.408, "action": "Scrolled and orbited toward the upper facade, bringing a balcony door, railing, and textured wall into a close-up view.", "intent": "Examine exterior facade details.", "app": "SketchUp 2026", "details": "The close view shows a brown door, window, balcony glazing, and wall-mounted fixture."}, {"start_s": 34039.408, "end_s": 34047.698, "action": "Continued scrolling and middle-button orbiting around the building, transitioning from a close side view to a distant overall scene view with multiple model components visible.", "intent": "Survey the model from wider exterior angles.", "app": "SketchUp 2026", "details": "The main building, detached structures, and surrounding site elements are visible in the final view."}, {"start_s": 34047.698, "end_s": 34057.902, "action": "Scrolled and orbited around the model, moving from a distant view to a low angled facade view and then to a closer upper-level perspective.", "intent": "Continue reviewing the building exterior from different angles.", "app": "SketchUp 2026", "details": "The Materials tray remained open; no visible modeling edits occurred."}, {"start_s": 34057.902, "end_s": 34068.046, "action": "Orbited and zoomed the SketchUp camera around the multi-building 3D model, bringing the detached structures and central building into different views.", "intent": "Inspect the architectural model from multiple angles.", "app": "SketchUp", "details": null}, {"start_s": 34068.046, "end_s": 34079.34, "action": "Continued orbiting and zooming around the building model, then opened the File menu to view available document commands and recent SketchUp files.", "intent": "Review the model and access file-management options.", "app": "SketchUp", "details": "The File menu was open at the end of the span."}, {"start_s": 34079.34, "end_s": 34098.709, "action": "Closed or switched away from the File menu, adjusted the SketchUp window, and interacted with the application before opening the File menu again and switching to the recorder window.", "intent": "Transition away from the current SketchUp view.", "app": "SketchUp", "details": "The span ended with an application switch to the recorder window."}, {"start_s": 34098.709, "end_s": 34111.293, "action": "Returned to SketchUp and orbited and zoomed closely toward the building facade, focusing on balconies, doors, windows, and wall details.", "intent": "Inspect facade details in the architectural model.", "app": "SketchUp", "details": "The SketchUp view became a close-up of the apartment facade."}, {"start_s": 34111.293, "end_s": 34118.712, "action": "Continued orbiting and zooming around the facade, shifting the viewpoint across the balcony, door, window, and textured wall surfaces.", "intent": "Examine the facade from additional close angles.", "app": "SketchUp", "details": null}, {"start_s": 34118.712, "end_s": 34138.712, "action": "Remained on a static SketchUp view of the building facade and adjacent structures without recorded interaction.", "intent": "Pause while reviewing the model view.", "app": "SketchUp", "details": "No interaction events were recorded."}, {"start_s": 34138.712, "end_s": 34149.826, "action": "Scrolled without changing the visible SketchUp view, leaving the multi-story building model in close perspective.", "intent": "Review the 3D building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 34149.826, "end_s": 34160.408, "action": "Scrolled repeatedly to zoom out and reveal the full multi-story building, adjacent structures, and surrounding model space.", "intent": "Inspect the overall site layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 34160.408, "end_s": 34168.791, "action": "Scrolled to adjust the view, then middle-clicked to orbit around the building and move into a closer view of its upper facade and rooftop.", "intent": "Examine the building exterior from another angle.", "app": "SketchUp 2026", "details": null}, {"start_s": 34168.791, "end_s": 34180.226, "action": "Used repeated scrolling and middle-click orbiting to rotate around the building, shifting from the front facade toward a close view of balconies, doors, and exterior walls.", "intent": "Inspect exterior architectural details.", "app": "SketchUp 2026", "details": null}, {"start_s": 34180.226, "end_s": 34189.619, "action": "Middle-clicked and scrolled into a very close view of an upper balcony, window, and wooden door; activated a guide-related tool and entered brief keyboard input while continuing to adjust the view.", "intent": "Inspect or prepare to measure the facade area.", "app": "SketchUp 2026", "details": "The status bar later showed the guide-creation tool and an area readout."}, {"start_s": 34189.619, "end_s": 34199.355, "action": "Scrolled and middle-clicked to orbit away from the close facade view, briefly showing the building from a lower exterior angle, then zoomed far out to display the separated model components.", "intent": "Review the model from a wider perspective.", "app": "SketchUp 2026", "details": null}, {"start_s": 34199.355, "end_s": 34209.647, "action": "Entered 16\",6' in the Dimensions field and then typed 16\" after scrolling briefly, leaving the rectangle tool active.", "intent": "Set or revise precise rectangle dimensions.", "app": "SketchUp 2026", "details": "The Dimensions field visibly shows 16\",6'."}, {"start_s": 34209.647, "end_s": 34220.126, "action": "Completed the dimension entry with 6 and a quote, pressed Enter, then scrolled and dragged across the model view, changing the view and leaving a narrow rectangular object visible.", "intent": "Confirm the entered dimensions and inspect or reposition the model view.", "app": "SketchUp 2026", "details": "The title changed to g+3* and the later view shows a narrow upright rectangle."}, {"start_s": 34220.126, "end_s": 34230.749, "action": "Scrolled and orbited the SketchUp view, clicked around the geometry, and selected a long rectangular face; the view ended with that face highlighted.", "intent": "Navigate the model and select a rectangular component.", "app": "SketchUp 2026", "details": "Orbit mode was visible, followed by a blue-highlighted rectangular face."}, {"start_s": 34230.749, "end_s": 34248.991, "action": "Typed p and 6\", pressed Enter, then navigated and orbited around the selected rectangular solid. Opened the View menu and left it displayed over the enlarged block.", "intent": "Modify or inspect the selected solid using dimensions and view controls.", "app": "SketchUp 2026", "details": "The View menu is open with display options such as Axes, Guides, Shadows, and Edge Style."}, {"start_s": 34248.991, "end_s": 34259.661, "action": "Opened the Toolbars dialog, switched to the 1001bit - tools toolbar, and returned to the SketchUp model with the toolbar visible.", "intent": "Configure and enable the 1001bit modeling toolbar.", "app": "SketchUp 2026", "details": "The Toolbars dialog shows toolbar checkboxes; the 1001bit - tools toolbar appears across the top afterward."}, {"start_s": 34259.661, "end_s": 34264.528, "action": "Opened the 1001bit.com Create Screens panel, briefly switched back to the model, and closed or hid the panel while keeping the 1001bit toolbar visible.", "intent": "Inspect the Create Screens tool and return to modeling.", "app": "SketchUp 2026", "details": "The panel describes creating grilles, gratings, or perforated screens."}, {"start_s": 34264.528, "end_s": 34276.033, "action": "Switched to the SketchUp horizontal-louvres tool, enlarged its window, and clicked within the louvre creation panel.", "intent": "Open and prepare the horizontal louvre settings interface.", "app": "SketchUp", "details": "The panel displayed fields for louvre depth, thickness, spacing, angle, and location."}, {"start_s": 34276.033, "end_s": 34285.043, "action": "Entered 6 inches in the Louvre depth field.", "intent": "Set the louvre depth parameter.", "app": "SketchUp", "details": "The depth field changed from its previous value to 6 inches."}, {"start_s": 34285.043, "end_s": 34295.755, "action": "Edited the Louvre thickness field to 1 inch, then selected the Louvre spacing field for editing.", "intent": "Set louvre thickness and prepare to change spacing.", "app": "SketchUp", "details": "The spacing field remained selected with its prior value visible."}, {"start_s": 34295.755, "end_s": 34307.335, "action": "Replaced the Louvre spacing value with 2 inches, changed the louvre angle to 0, selected the front location option, and switched back to the SketchUp model window.", "intent": "Complete the louvre parameters and apply the intended face-location setting.", "app": "SketchUp", "details": "The settings panel showed depth 6 inches, thickness 1 inch, spacing 2 inches, angle 0, and front selected."}, {"start_s": 34307.335, "end_s": 34313.99, "action": "Returned to the SketchUp model, clicked the model face, and selected the rectangular solid.", "intent": "Select the target face or solid for horizontal louvre creation.", "app": "SketchUp", "details": "The rectangular object became highlighted with a selection bounding box."}, {"start_s": 34313.99, "end_s": 34318.353, "action": "Reopened the horizontal-louvres settings panel, repositioned its window, and switched back to the model.", "intent": "Review or continue the configured louvre operation on the selected model.", "app": "SketchUp", "details": "The panel still showed 6-inch depth, 1-inch thickness, 2-inch spacing, 0 angle, and front location."}, {"start_s": 34318.353, "end_s": 34329.969, "action": "Navigated among SketchUp 1001bit tools and manipulated the model view, including orbiting and scrolling, then switched to the main SketchUp window.", "intent": "Inspect or adjust the model and tool state.", "app": "SketchUp", "details": "The model changed from a detailed louvred form to a plain rectangular solid view."}, {"start_s": 34329.969, "end_s": 34337.738, "action": "Switched between SketchUp plugin windows and opened the 1001bit.com rafter tool, displaying the Create Roof Rafters dialog with width, depth, and spacing fields; then returned to the main model.", "intent": "Review roof-rafter tool settings before applying them.", "app": "SketchUp", "details": "The dialog showed Create Rafters and Exit buttons and preset dimensional fields."}, {"start_s": 34337.738, "end_s": 34341.857, "action": "Switched among plugin windows and attempted to run a tool on the model; SketchUp displayed a warning that roof faces must be selected before running the routine.", "intent": "Attempt to generate roof rafters or related geometry.", "app": "SketchUp", "details": "The warning was dismissed, leaving the rectangular model visible."}, {"start_s": 34341.857, "end_s": 34346.589, "action": "Switched back to the model, selected the large top face, and attempted another 1001bit tool operation; SketchUp reported that the selection was invalid and required a group or component.", "intent": "Apply a plugin tool to the selected model geometry.", "app": "SketchUp", "details": "The top face became highlighted, but the tool did not run because the selection was not a group or component."}, {"start_s": 34346.589, "end_s": 34350.608, "action": "Retried the plugin operation on the highlighted top face and received the same invalid-selection warning, then returned to the model with the face still selected.", "intent": "Retry the tool with the current selection.", "app": "SketchUp", "details": "SketchUp again required selection of a group or component before running the tool."}, {"start_s": 34350.608, "end_s": 34354.998, "action": "Retried the tool once more on the selected face, dismissed the invalid-selection warning, and left the rectangular top face highlighted in the main SketchUp window.", "intent": "Continue attempting to apply the plugin tool.", "app": "SketchUp", "details": "No geometry change was visible; the tool continued to reject the face-only selection."}, {"start_s": 34354.998, "end_s": 34359.799, "action": "Switched among SketchUp windows and attempted to run a 1001bit tool; displayed an \u201cInvalid selection\u201d warning because no group or component was selected.", "intent": "Attempt to apply a 1001bit modeling tool to the model.", "app": "SketchUp", "details": "A rectangular solid remained visible behind the warning dialog."}, {"start_s": 34359.799, "end_s": 34364.929, "action": "Dismissed the invalid-selection warning, manipulated the selection around the rectangular solid, and attempted another 1001bit tool; the warning reappeared before switching to a revolved-surface tool.", "intent": "Select geometry and try a different modeling operation.", "app": "SketchUp", "details": "The solid was shown with a dotted selection boundary, but the tool still reported an invalid selection."}, {"start_s": 34364.929, "end_s": 34370.257, "action": "Selected a 1001bit toolbar tool and pressed Space while the rectangular solid remained in view; no clear geometry change was visible.", "intent": "Try activating a modeling tool on the current geometry.", "app": "SketchUp", "details": "The model remained a single rectangular solid."}, {"start_s": 34370.257, "end_s": 34374.648, "action": "Switched among SketchUp windows, clicked the solid and toolbar controls, and ended with the rectangular solid selected in blue.", "intent": "Select the solid and prepare it for a plugin operation.", "app": "SketchUp", "details": "The status bar indicated extension functionality while the solid became highlighted."}, {"start_s": 34374.648, "end_s": 34385.313, "action": "Opened the 1001bit Polar Array dialog, reviewed its controls, then closed or hid it and interacted with the selected solid using clicks, scrolling, and a typed \u201cm\u201d command.", "intent": "Configure or initiate a polar-array operation on the selected geometry.", "app": "SketchUp", "details": "The Polar Array dialog initially showed a polar array angle of 360 degrees; the solid stayed selected and the view zoomed closer."}, {"start_s": 34385.313, "end_s": 34395.102, "action": "Entered `1'` into the active distance input and pressed Enter to confirm the copy or move distance.", "intent": "Set the operation distance for the active SketchUp copy/move action.", "app": "SketchUp", "details": "The status bar showed copy-placement mode and the Distance field was active."}, {"start_s": 34395.102, "end_s": 34405.232, "action": "Selected the left end face of the SketchUp solid, activated a move/copy operation, and entered a 6-inch distance before confirming.", "intent": "Create a precisely sized offset or copy at the solid\u2019s left end.", "app": "SketchUp 2026", "details": "The long rectangular solid remained visible with the left end region targeted."}, {"start_s": 34405.232, "end_s": 34412.716, "action": "Scrolled within the SketchUp view, selected the left end face, and clicked to begin moving or copying it.", "intent": "Prepare the left end face for another geometric adjustment.", "app": "SketchUp 2026", "details": "The left end face became highlighted while the move/copy tool remained active."}, {"start_s": 34412.716, "end_s": 34422.777, "action": "Scrolled and clicked through the model, then selected the entire long solid; the end face selection was replaced by an outline around the full object.", "intent": "Change the selection from the end face to the complete solid.", "app": "SketchUp 2026", "details": "The full solid was outlined in blue by the end of the span."}, {"start_s": 34422.777, "end_s": 34432.769, "action": "Selected the left end face, activated move/copy, entered a 4-inch distance, and continued clicking around the lower-left edge of the solid.", "intent": "Apply a 4-inch offset to the selected end region.", "app": "SketchUp 2026", "details": "The left end face was highlighted and the distance field showed 4 inches during the operation."}, {"start_s": 34432.769, "end_s": 34444.802, "action": "Continued clicking the left end region, selected the end face, activated move/copy, and entered a 6-inch distance.", "intent": "Apply another measured offset to the end face.", "app": "SketchUp 2026", "details": "A narrow end section was highlighted while the move/copy distance field showed approximately 5 3/16 inches after the entered value."}, {"start_s": 34444.802, "end_s": 34454.578, "action": "Confirmed the 6-inch operation, entered an asterisk and then 16 followed by Enter, and scrolled while the narrow left section remained selected.", "intent": "Complete a repeated or multiplied geometric operation on the end section.", "app": "SketchUp 2026", "details": "The distance field displayed approximately 6 inches and later *16; the end section stayed highlighted."}, {"start_s": 34454.578, "end_s": 34464.81, "action": "Selected and manipulated the rectangular end components, then dragged across the model; the previously highlighted pieces disappeared from the visible end area.", "intent": "Modify the end geometry of the SketchUp model.", "app": "SketchUp 2026", "details": "The long subdivided rectangular model remained visible while the right-side components changed."}, {"start_s": 34464.81, "end_s": 34474.916, "action": "Dragged and navigated around the model, clicked near the lower-right edge, and adjusted the view to inspect the rectangular body and its end face.", "intent": "Inspect and adjust the model view during geometry editing.", "app": "SketchUp 2026", "details": "The camera moved from the end area to a closer view of the body and end edge."}, {"start_s": 34474.916, "end_s": 34484.409, "action": "Clicked around the model and orbited the camera, then continued scrolling to reposition the view along the subdivided top surface.", "intent": "Reorient the SketchUp camera to inspect the model surface.", "app": "SketchUp 2026", "details": "The view shifted from the right end toward a close-up of the long top face."}, {"start_s": 34484.409, "end_s": 34493.189, "action": "Scrolled and orbited across the model, then clicked and typed briefly before selecting a narrow rectangular face with the Push/Pull tool.", "intent": "Select and begin editing a narrow face on the model.", "app": "SketchUp 2026", "details": "A narrow vertical face became highlighted and the distance readout appeared in the status bar."}, {"start_s": 34493.189, "end_s": 34500.953, "action": "Scrolled the view while keeping the narrow rectangular face selected under the Push/Pull tool.", "intent": "Maintain the selected face while adjusting the view for further editing.", "app": "SketchUp 2026", "details": "The highlighted strip remained visible near the left side of the subdivided surface."}, {"start_s": 34500.953, "end_s": 34511.552, "action": "Scrolled slightly and middle-clicked to navigate, leaving the narrow face selected with the Push/Pull tool active.", "intent": "Continue positioning the view for the selected-face edit.", "app": "SketchUp 2026", "details": "The selected strip remained highlighted and the distance indicator stayed visible."}, {"start_s": 34511.552, "end_s": 34531.552, "action": "Clicked and scrolled within the SketchUp model while the Push/Pull tool remained active; the selected narrow face stayed highlighted.", "intent": "Continue editing the selected model face.", "app": "SketchUp 2026", "details": null}, {"start_s": 34531.552, "end_s": 34543.784, "action": "Waited with the SketchUp model visible and the narrow face selected; no substantive model change was shown.", "intent": "Pause before continuing the edit.", "app": "SketchUp 2026", "details": null}, {"start_s": 34543.784, "end_s": 34555.228, "action": "Adjusted the view with scrolling, then entered 0.5\" and pressed Enter for the active Push/Pull operation, changing the selected strip\u2019s extrusion.", "intent": "Set a precise extrusion distance for the selected face.", "app": "SketchUp 2026", "details": "The model shows a long base with repeated narrow raised strips."}, {"start_s": 34555.228, "end_s": 34565.262, "action": "Scrolled and clicked across additional faces, applying Push/Pull edits that produced multiple raised strips along the top of the base while changing the camera angle.", "intent": "Repeat the modeled strip feature across the base.", "app": "SketchUp 2026", "details": "Several rectangular strips are visibly extruded above the base."}, {"start_s": 34565.262, "end_s": 34575.149, "action": "Continued scrolling and clicking or dragging on successive faces, extending the repeated raised-strip pattern toward the right side of the model.", "intent": "Continue duplicating the raised face details across the model.", "app": "SketchUp 2026", "details": "The view shifts along the model as more evenly spaced raised strips appear."}, {"start_s": 34575.149, "end_s": 34585.33, "action": "Clicked and scrolled around the right side of the model, then zoomed out and switched to the Select tool, leaving the completed repeated-strip assembly visible.", "intent": "Review the modeled result from a wider view.", "app": "SketchUp 2026", "details": "The final view shows a long rectangular base with many repeated raised strips."}, {"start_s": 34585.33, "end_s": 34594.798, "action": "Selected the circle tool, clicked and dragged to define a circle, then entered 3 inches and confirmed it.", "intent": "Create a circular profile with a specified radius.", "app": "SketchUp 2026", "details": "A circle preview was visible below the existing model."}, {"start_s": 34594.798, "end_s": 34605.893, "action": "Selected the completed circle and adjusted the view, then entered a command sequence that left the circle enlarged and unselected.", "intent": "Inspect and modify the newly created circle.", "app": "SketchUp 2026", "details": "The circle changed from a selected patterned face to a larger white-faced circle."}, {"start_s": 34605.893, "end_s": 34615.552, "action": "Entered 80 and confirmed, created another circle with a 3-inch radius, then selected it and opened its context menu.", "intent": "Create and inspect another circular geometry element.", "app": "SketchUp 2026", "details": "The context menu showed options including Entity Info, Erase, Hide, Make Group, and Explode Curve."}, {"start_s": 34615.552, "end_s": 34624.93, "action": "Dismissed the context menu, activated an offset-style tool, selected the circle edge, and entered an offset value of approximately 1/16 inch.", "intent": "Create a narrow offset ring around the circle.", "app": "SketchUp 2026", "details": "A second concentric edge appeared around the white circular face."}, {"start_s": 34624.93, "end_s": 34635.293, "action": "Entered 0.2 inches and confirmed, zoomed and adjusted the view, then activated the Push/Pull tool and clicked the circular face.", "intent": "Set the ring offset and begin extruding the circular geometry.", "app": "SketchUp 2026", "details": "The view zoomed in and the ring and inner face were visible; Push/Pull was active at the end."}, {"start_s": 34635.293, "end_s": 34645.057, "action": "Adjusted the view with scroll input and entered 0.2 inches, confirming the value while the Push/Pull tool remained active.", "intent": "Specify the extrusion distance for the circular ring.", "app": "SketchUp 2026", "details": "The model showed a shallow concentric ring around the face, with the distance field displaying approximately 3/16 inch at the sampled view."}, {"start_s": 34645.057, "end_s": 34664.373, "action": "Scrolled and clicked through the SketchUp model and tool area, changing the view from a close circular form to a keyboard-like assembly with a separate circular piece.", "intent": "Inspect and navigate the SketchUp model.", "app": "SketchUp", "details": "The 1001bit tools toolbar remained visible while the model view changed."}, {"start_s": 34664.373, "end_s": 34677.283, "action": "Returned focus to the SketchUp model, entered tool shortcuts, and opened the Default Tray with the Materials panel and material-category menu visible.", "intent": "Prepare material editing for the model.", "app": "SketchUp", "details": "The Materials category list was opened in the Default Tray."}, {"start_s": 34677.283, "end_s": 34686.57, "action": "Selected material options in the Materials panel, scrolling the category list and leaving a material named Material3 active while the keyboard-like model remained visible.", "intent": "Choose a material for painting model surfaces.", "app": "SketchUp", "details": "The Materials panel showed category entries including Metal and material swatches."}, {"start_s": 34686.57, "end_s": 34696.604, "action": "Navigated and zoomed into the keyboard-like model, selected a wood material from the Wood category, and applied it to a visible key or panel surface.", "intent": "Apply a wood finish to part of the model.", "app": "SketchUp", "details": "The active material was Wood_Veneer_15_1K, and one surface became brown wood-textured."}, {"start_s": 34696.604, "end_s": 34706.368, "action": "Painted additional adjacent keys or panels with the selected wood material while panning across the close-up model.", "intent": "Extend the wood finish across more model surfaces.", "app": "SketchUp", "details": "Several neighboring surfaces changed from white to brown wood texture."}, {"start_s": 34706.368, "end_s": 34716.535, "action": "Continued applying the wood material to additional keys or panels, then zoomed and orbited out to review the partially finished keyboard-like assembly.", "intent": "Complete and inspect the material application.", "app": "SketchUp", "details": "The final view showed multiple brown wood-textured keys on the left side and remaining white keys on the right."}, {"start_s": 34716.535, "end_s": 34726.205, "action": "Clicked and dragged across several wooden slats, then scrolled slightly while using the Paint Bucket tool with the Wood_Veneer_15_1K material.", "intent": "Apply or inspect the wood material across the slatted model.", "app": "SketchUp 2026", "details": "The model remained a long white base with multiple brown wooden slats; the Materials tray showed Wood_Veneer_15_1K."}, {"start_s": 34726.205, "end_s": 34736.136, "action": "Scrolled and adjusted the camera around the slatted model, then clicked and dragged over additional slats with the paint tool.", "intent": "Continue applying the wood material and inspect the model from a closer angle.", "app": "SketchUp 2026", "details": "The view moved to a close-up of repeated brown slats with white gaps and edges."}, {"start_s": 34736.136, "end_s": 34746.435, "action": "Scrolled and orbited around the model, clicking and dragging on slats and the end face while the wood material remained active.", "intent": "Inspect and continue material application across the model from different viewpoints.", "app": "SketchUp 2026", "details": "The camera moved toward the far end and then the white end face of the rectangular base."}, {"start_s": 34746.435, "end_s": 34757.318, "action": "Scrolled and repositioned the camera along the slatted surface, clicking and dragging across multiple brown boards with the paint tool.", "intent": "Review and extend the wood finish across the visible boards.", "app": "SketchUp 2026", "details": "The view progressed along the model, showing increasingly continuous brown coverage on the slats."}, {"start_s": 34757.318, "end_s": 34766.487, "action": "Scrolled through close-up views and clicked several slats while orbiting toward the opposite end of the model.", "intent": "Inspect the applied wood material and adjust the viewing angle.", "app": "SketchUp 2026", "details": "The model displayed a mostly brown slatted surface; the Materials tray still showed Wood_Veneer_15_1K."}, {"start_s": 34766.487, "end_s": 34776.53, "action": "Scrolled and entered brief keyboard input, then changed tools and zoomed/orbited out to review the complete wooden slatted assembly.", "intent": "Finish the material inspection and obtain an overall view of the model.", "app": "SketchUp 2026", "details": "The final view showed the full narrow rectangular assembly with uniformly brown slats and the Materials tray open."}, {"start_s": 34776.53, "end_s": 34787.648, "action": "Navigated and zoomed around the SketchUp model, moving from a close view of the wooden slatted object to a distant view while switching selection and navigation tools.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 34787.648, "end_s": 34796.191, "action": "Zoomed and navigated to circular geometry, selected it, and initiated a move or copy operation, leaving the selected circular object above another circular form.", "intent": "Position or duplicate circular geometry near the wooden model.", "app": "SketchUp 2026", "details": "The status bar showed an active placement operation with a distance readout."}, {"start_s": 34796.191, "end_s": 34807.708, "action": "Navigated toward the wooden slatted model and placed or moved the selected circular geometry onto its surface, then continued adjusting the view and selection.", "intent": "Place circular geometry on the wooden model.", "app": "SketchUp 2026", "details": "The circular object appeared selected on the model in the later views."}, {"start_s": 34807.708, "end_s": 34817.507, "action": "Selected and moved the circular geometry across the wooden surface, creating or positioning a second circular instance; zoomed out to review two circular objects on the model.", "intent": "Duplicate and arrange circular features on the wooden model.", "app": "SketchUp 2026", "details": "The final view showed two white circular features on the slatted wooden object and another circle below it."}, {"start_s": 34817.507, "end_s": 34827.378, "action": "Selected a circular feature, started another move or copy operation, and zoomed in closely while repositioning it over the wooden surface.", "intent": "Continue refining the placement of a circular feature.", "app": "SketchUp 2026", "details": "The selected circle remained highlighted and the move tool status was visible."}, {"start_s": 34827.378, "end_s": 34837.358, "action": "Continued moving the selected circular geometry with extensive dragging and view navigation, then zoomed out to review the wooden model with two circular features and a separate selected circle below.", "intent": "Finalize or inspect the circular feature arrangement.", "app": "SketchUp 2026", "details": "The final view showed the wooden slatted model, two white circular features on it, and a separate selected circular object beneath."}, {"start_s": 34837.358, "end_s": 34845.442, "action": "Clicked and briefly dragged in the SketchUp modeling area near the wooden assembly.", "intent": "Interact with the model view.", "app": "SketchUp 2026", "details": "Wooden slatted object with two circular elements remained visible."}, {"start_s": 34845.442, "end_s": 34865.442, "action": "Waited with the SketchUp model and Materials tray visible; no interaction was recorded.", "intent": "Pause or review the current model.", "app": "SketchUp 2026", "details": "A loading spinner appeared briefly while the model view remained unchanged."}, {"start_s": 34865.442, "end_s": 34885.442, "action": "Remained idle in SketchUp while the wooden assembly stayed displayed.", "intent": "Pause or review the model.", "app": "SketchUp 2026", "details": "System configuration changes and resume were recorded, with no visible model edit."}, {"start_s": 34885.442, "end_s": 34897.706, "action": "Opened the Materials category menu, browsed it with scrolling, and clicked around the Materials tray.", "intent": "Browse available material categories and controls.", "app": "SketchUp 2026", "details": "The category list showed options including Paints, Wood, Metal, Plastic, and others; the model remained unchanged."}, {"start_s": 34897.706, "end_s": 34908.152, "action": "Zoomed and navigated to the circular model element, selected orange paint materials, and applied an orange material to the visible circular face.", "intent": "Color the circular component of the model.", "app": "SketchUp 2026", "details": "The Materials tray switched to Asian Paints Colours of India; the selected material names included orange shades, and the circular face became orange."}, {"start_s": 34908.152, "end_s": 34918.399, "action": "Selected additional yellow-orange paint swatches and applied them while zooming and navigating across the wooden assembly; ended with one circular face yellow-orange and the other still white.", "intent": "Continue applying paint materials to the circular components.", "app": "SketchUp 2026", "details": "The Materials tray displayed yellow and orange swatches, including material name 2082 AP X161 Boondi-I."}, {"start_s": 34918.399, "end_s": 34928.378, "action": "Selected and navigated around the wooden model, zooming and changing the view while the Materials tray remained open.", "intent": "Inspect or adjust the model view and selection.", "app": "SketchUp 2026", "details": "The view changed from a close-up with circular elements to a distant view of the wooden piece."}, {"start_s": 34928.378, "end_s": 34938.546, "action": "Dragged across the model, adjusted the view, and selected the wooden rectangular assembly containing two circular yellow elements.", "intent": "Select and inspect the modeled assembly.", "app": "SketchUp 2026", "details": "The assembly was shown centered and highlighted in blue after selection."}, {"start_s": 34938.546, "end_s": 34948.425, "action": "Orbited and zoomed the camera around the scene, moving from the wooden assembly toward the surrounding building geometry.", "intent": "Navigate the 3D scene to inspect model context.", "app": "SketchUp 2026", "details": "The camera ended beneath and beside separated building components, with the wooden piece visible in the scene."}, {"start_s": 34948.425, "end_s": 34959.549, "action": "Continued navigating the scene and used the copy tool on the selected wooden group, positioning a copy near the building model.", "intent": "Copy and place the selected model component.", "app": "SketchUp 2026", "details": "The selected wooden group was shown with a blue outline and copy-placement guides; the view then showed the building model."}, {"start_s": 34959.549, "end_s": 34979.549, "action": "Switched to Windows Explorer, then returned to the SketchUp view with the building model and active copy-placement state visible.", "intent": "Change applications briefly while retaining the SketchUp operation.", "app": "SketchUp 2026 / Windows Explorer", "details": "Only a brief application switch was recorded; the visible evidence remained the SketchUp building scene."}, {"start_s": 34979.549, "end_s": 34989.532, "action": "Returned to SketchUp and orbited and zoomed closely around the building facade, focusing on an upper balcony and door area while copy-placement guides remained visible.", "intent": "Inspect the target area for placing the copied component.", "app": "SketchUp 2026", "details": "The final view was a close-up of a brown door, balcony railing, and overhang."}, {"start_s": 34989.532, "end_s": 34999.532, "action": "Navigated around the SketchUp model with middle-button orbiting and scrolling, then clicked to continue manipulating the selected architectural elements. Ended with wood-finished ceiling components outlined in blue.", "intent": "Inspect and position the ceiling assembly in the 3D model.", "app": "SketchUp 2026", "details": "Materials tray remained open with the selected material named \u201c2082 AP X161 Boondi-I.\u201d"}, {"start_s": 34999.532, "end_s": 35009.123, "action": "Entered a space and \u201cm\u201d, dragged briefly, then orbited and scrolled around the selected wood ceiling assembly. Changed the view from an oblique close-up to a rotated side perspective while the components remained outlined in blue.", "intent": "Reorient the camera and manipulate the selected ceiling elements.", "app": "SketchUp 2026", "details": "The model remained in an active move/orbit-style interaction, with the wood panels and framing selected."}, {"start_s": 35009.123, "end_s": 35018.849, "action": "Orbited the model with middle-button drags and a scroll, moving to an underside view of the wood ceiling panels and circular fixture opening. Left the assembly selected and visible across the upper portion of the viewport.", "intent": "Review the underside arrangement of the ceiling assembly.", "app": "SketchUp 2026", "details": "No distinct geometry edit was visibly completed; the view was repositioned for inspection."}, {"start_s": 35018.849, "end_s": 35029.569, "action": "Clicked and dragged on the model, entered a space and \u201cm\u201d, then continued orbiting and scrolling. Repositioned the view to show the wood fascia and underside framing from a side angle, with the selected assembly outlined in blue.", "intent": "Adjust the selected ceiling assembly or inspect its placement from another angle.", "app": "SketchUp 2026", "details": "The status bar indicated an active move/copy-style tool during part of the span."}, {"start_s": 35029.569, "end_s": 35039.498, "action": "Selected and manipulated the model with clicks and a brief drag, then orbited and scrolled outward. Revealed a wider underside view of the wood ceiling with two circular fixtures and surrounding building geometry.", "intent": "Inspect the completed ceiling treatment in the broader architectural context.", "app": "SketchUp 2026", "details": "The final view showed the wood slat ceiling and circular fixtures without an obvious geometry change."}, {"start_s": 35039.498, "end_s": 35048.812, "action": "Clicked the ceiling assembly, entered \u201cs\u201d, orbited around it, and then clicked another control to expose editing handles. Ended with the ceiling panel assembly selected in yellow and green grip points visible.", "intent": "Select the ceiling assembly and prepare it for further editing.", "app": "SketchUp 2026", "details": "The final screenshot showed active selection/edit handles on the wood ceiling and circular fixture."}, {"start_s": 35048.812, "end_s": 35058.577, "action": "Adjusted the SketchUp view around the selected wooden canopy, zooming or orbiting out to reveal the building model and canopy components.", "intent": "Inspect the canopy model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with a yellow material selected."}, {"start_s": 35058.577, "end_s": 35068.846, "action": "Orbited and zoomed the SketchUp camera beneath and around the wooden canopy, changing from a close underside view to a wider view showing two circular yellow fixtures.", "intent": "Review the canopy underside and surrounding structure.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; interactions primarily changed the camera view."}, {"start_s": 35068.846, "end_s": 35078.358, "action": "Continued orbiting and zooming around the canopy, then clicked and briefly typed while inspecting the wooden slats and circular fixtures from progressively closer angles.", "intent": "Examine the canopy details and positioning.", "app": "SketchUp 2026", "details": "The model remained in the SketchUp viewport with the Materials tray visible."}, {"start_s": 35078.358, "end_s": 35089.277, "action": "Selected and manipulated canopy geometry, then zoomed out to review the upper facade and balcony; the viewport showed a blue-highlighted strip of canopy elements during the operation.", "intent": "Position or copy canopy components on the building facade.", "app": "SketchUp 2026", "details": "SketchUp displayed active manipulation/copy controls and a distance readout."}, {"start_s": 35089.277, "end_s": 35099.289, "action": "Zoomed and orbited to a wider building view, keeping the canopy selected while reviewing its placement across the facade and balconies.", "intent": "Inspect the canopy placement on the building exterior.", "app": "SketchUp 2026", "details": "The canopy remained highlighted in blue in the first evidence view, then appeared unselected in the later view."}, {"start_s": 35099.289, "end_s": 35109.902, "action": "Orbited and zoomed around the building facade, then selected and manipulated the canopy assembly; the final view showed the wooden canopy highlighted in blue with multiple circular fixtures.", "intent": "Adjust or copy the canopy assembly while checking its facade placement.", "app": "SketchUp 2026", "details": "Active copy/manipulation controls and a distance readout were visible in the final evidence."}, {"start_s": 35109.902, "end_s": 35120.193, "action": "Orbited and zoomed around the building model, moving from an underside ceiling view to a wider facade view while the Materials tray remained open.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp 2026", "details": "Viewed wood-paneled soffits, circular lights, balconies, doors, windows, and the selected yellow material."}, {"start_s": 35120.193, "end_s": 35131.153, "action": "Continued orbiting and zooming around the facade, shifting from a close balcony view to an underside view of the projecting soffit and lights.", "intent": "Review the building exterior geometry from additional angles.", "app": "SketchUp 2026", "details": "The Materials tray stayed open with the yellow material swatches visible."}, {"start_s": 35131.153, "end_s": 35141.688, "action": "Selected model geometry, entered a move/copy operation, and navigated to a wider front elevation before returning to a close-up of the soffit; typed a single 'm' during the operation.", "intent": "Position or copy selected exterior elements in the model.", "app": "SketchUp 2026", "details": "Selected soffit geometry was highlighted in blue and move/copy inference guides and distance readouts were visible."}, {"start_s": 35141.688, "end_s": 35152.458, "action": "Orbited and zoomed around the selected soffit, then dragged the selected wood-paneled canopy outward and adjusted the view to inspect its placement.", "intent": "Copy or reposition the selected canopy element.", "app": "SketchUp 2026", "details": "The selected canopy remained outlined in blue, with duplicate geometry visible extending to the right in one view."}, {"start_s": 35152.458, "end_s": 35162.57, "action": "Continued navigating around the building and selected canopy, zooming between close underside views and the front facade while inspecting the apparent placement.", "intent": "Verify the copied canopy and surrounding facade from multiple viewpoints.", "app": "SketchUp 2026", "details": "Blue selection outlines and move/copy inference guides remained visible during the inspection."}, {"start_s": 35162.57, "end_s": 35172.753, "action": "Zoomed out and orbited from the canopy area to a broad front elevation, then settled on an upper-level facade view with balconies, doors, windows, and vents visible.", "intent": "Review the overall exterior result after the modeling operation.", "app": "SketchUp 2026", "details": "The Materials tray remained open; no additional geometry edit was visibly completed."}, {"start_s": 35172.753, "end_s": 35183.556, "action": "Navigated around the SketchUp building model with repeated middle-button orbit/zoom gestures, then selected a point or object and entered \u201cm,\u201d leaving the camera close to an upper facade and canopy.", "intent": "Inspect and position the 3D model view.", "app": "SketchUp 2026", "details": "Materials tray remained open with the material name \u201c2082 AP X161 Boondi-I.\u201d"}, {"start_s": 35183.556, "end_s": 35191.747, "action": "Zoomed out to view the full building and surrounding model, then orbited back toward the front facade and selected a large rectangular brown object near the building.", "intent": "Review the model layout and select a scene element for editing.", "app": "SketchUp 2026", "details": "The selected rectangular object was outlined in blue and the rotation tool became active near the end of the span."}, {"start_s": 35191.747, "end_s": 35201.919, "action": "Entered \u201c90\u201d and confirmed it, rotating the selected rectangular object to a 90-degree orientation; then zoomed and orbited out to inspect the building and object from a wider view.", "intent": "Rotate the selected model element by 90 degrees and inspect its placement.", "app": "SketchUp 2026", "details": "The rotation angle displayed 90.0 degrees before the view was changed."}, {"start_s": 35201.919, "end_s": 35211.951, "action": "Entered \u201cm\u201d and used the Move tool on the selected model geometry, dragging it while orbiting and zooming around the building; ended close to an upper balcony canopy with the geometry still selected.", "intent": "Move the selected architectural element into position on the building.", "app": "SketchUp 2026", "details": "The Move tool showed changing distance readouts, including approximately 108' 4 3/16\" and 83' 13/16\"."}, {"start_s": 35211.951, "end_s": 35222.813, "action": "Continued orbiting and zooming around the upper facade and canopy, keeping the moved geometry selected and bringing a louvered window and roof-edge details into close view.", "intent": "Inspect the moved element and nearby facade details.", "app": "SketchUp 2026", "details": "The selected roof-edge geometry remained outlined in blue while the Move tool distance readout stayed visible."}, {"start_s": 35222.813, "end_s": 35234.017, "action": "Zoomed and orbited to the underside of the canopy, clicked and dragged selected geometry, and entered space and \u201cm\u201d during repeated Move-tool operations; ended with the canopy and adjacent louvered window selected in close-up.", "intent": "Fine-position architectural details around the canopy and window.", "app": "SketchUp 2026", "details": "The final view showed blue-highlighted canopy/window-related geometry and the Move tool status prompt."}, {"start_s": 35234.017, "end_s": 35245.039, "action": "Orbited and zoomed around the selected balcony canopy, changing from a close underside view to a wider exterior view while keeping the model selected.", "intent": "Inspect the canopy from multiple angles.", "app": "SketchUp 2026", "details": "Materials tray remained open with the selected material shown."}, {"start_s": 35245.039, "end_s": 35252.895, "action": "Activated orbit and scale-related tools, adjusted the camera around the building facade, and left the canopy selected in a more distant exterior view.", "intent": "Reframe and adjust the selected canopy within the model view.", "app": "SketchUp 2026", "details": "The canopy remained highlighted while the view moved to show multiple floors."}, {"start_s": 35252.895, "end_s": 35262.805, "action": "Zoomed and orbited around the balcony canopy, then used a scale interaction to resize or inspect it; the view shifted toward the adjacent facade and windows.", "intent": "Refine the canopy\u2019s view and scale placement.", "app": "SketchUp 2026", "details": "Scale status text and a value near 1.59 appeared before returning to selection."}, {"start_s": 35262.805, "end_s": 35271.769, "action": "Used move/copy interactions on the selected canopy while orbiting and zooming upward along the building; the canopy appeared positioned beneath an upper balcony.", "intent": "Place or copy the canopy on the building facade.", "app": "SketchUp 2026", "details": "The status bar indicated that the selected items were being copied or placed."}, {"start_s": 35271.769, "end_s": 35281.786, "action": "Orbited and zoomed out to review the building exterior, transitioning from a close canopy view to a broad front elevation with the canopy still highlighted.", "intent": "Review the canopy placement relative to the full facade.", "app": "SketchUp 2026", "details": "The wider view showed several floors, balconies, and the selected canopy."}, {"start_s": 35281.786, "end_s": 35290.513, "action": "Orbited and zoomed around the lower facade and balcony area, moving from a close structural view to an angled view of the selected canopy and building base.", "intent": "Continue inspecting the canopy and surrounding facade from different angles.", "app": "SketchUp 2026", "details": "No clear geometry edit was completed; the selected object remained visible during camera navigation."}, {"start_s": 35290.513, "end_s": 35300.623, "action": "Navigated around the building model with middle-clicks and repeated scrolls, moving from a full front view to a close-up of the balcony fa\u00e7ade while keeping a component selected.", "intent": "Inspect the building fa\u00e7ade and selected balcony component from different views.", "app": "SketchUp 2026", "details": "Materials tray remained open with a yellow material selected."}, {"start_s": 35300.623, "end_s": 35310.891, "action": "Adjusted the camera with middle-clicks and scrolls to review the building front and side, briefly typed a space, and interacted with the selected model area before ending on a wider fa\u00e7ade view.", "intent": "Review the building model from multiple elevations and viewpoints.", "app": "SketchUp 2026", "details": "The selection remained active during navigation."}, {"start_s": 35310.891, "end_s": 35322.637, "action": "Zoomed and orbited toward the upper balcony soffit, selected the overhead wood panel area, and typed \u201cm\u201d while continuing to adjust the view.", "intent": "Inspect and begin manipulating the upper balcony ceiling component.", "app": "SketchUp 2026", "details": "The upper soffit and recessed lights became the focus; the selected geometry was highlighted blue."}, {"start_s": 35322.637, "end_s": 35332.527, "action": "Orbit- and zoomed around the selected wooden soffit, clicking and dragging its geometry while changing from an underside close-up to a view across the balcony windows and ceiling.", "intent": "Examine or position the selected soffit geometry from different angles.", "app": "SketchUp 2026", "details": "The selected soffit edges and grips remained visible, with a distance readout shown."}, {"start_s": 35332.527, "end_s": 35343.179, "action": "Continued navigating around the balcony ceiling with middle-clicks and scrolls, then clicked and dragged the selected soffit component while viewing adjacent recessed lights and windows.", "intent": "Inspect the ceiling component and its placement relative to the balcony structure.", "app": "SketchUp 2026", "details": "The interface indicated an active copy operation, and the selected panel remained outlined in blue."}, {"start_s": 35343.179, "end_s": 35352.257, "action": "Clicked and dragged the selected wooden ceiling panel while orbiting and zooming, ending with the panel still selected beside the neighboring soffit and recessed light.", "intent": "Position or copy the soffit panel within the building model.", "app": "SketchUp 2026", "details": "The copy-placement tool remained active and displayed a distance measurement."}, {"start_s": 35352.257, "end_s": 35362.418, "action": "Scrolled and adjusted the SketchUp camera around the building balconies, then clicked and dragged to reposition the view while the selected balcony soffit remained highlighted.", "intent": "Inspect and navigate the 3D building model.", "app": "SketchUp", "details": "Materials tray remained open with the material named 2082 AP X161 Boondi-I."}, {"start_s": 35362.418, "end_s": 35373.703, "action": "Orbited and zoomed the SketchUp camera from a whole-building view toward the side fa\u00e7ade, ending on a close view of a balcony door and textured wall.", "intent": "Review the building exterior from different viewpoints.", "app": "SketchUp", "details": "The building model and Materials tray stayed visible throughout."}, {"start_s": 35373.703, "end_s": 35384.939, "action": "Orbited and scrolled around the side fa\u00e7ade, keeping the balcony door, window, railing, and wall in view; clicked repeatedly near the wall area without a clearly visible model change.", "intent": "Inspect the side fa\u00e7ade and select or target geometry.", "app": "SketchUp", "details": "Selection tool was active near the end of the span."}, {"start_s": 35384.939, "end_s": 35394.845, "action": "Clicked the fa\u00e7ade geometry repeatedly, changing the visible selection, then navigated back to a wider building view and selected the upper portion of the model before hiding the SketchUp window.", "intent": "Select and review building geometry, then leave the application view.", "app": "SketchUp", "details": "The final events indicate the application was hidden and resized."}, {"start_s": 35394.845, "end_s": 35406.107, "action": "Returned to a clear whole-building SketchUp view, then scrolled and orbited around the exterior toward the side balconies and door area.", "intent": "Continue inspecting the 3D building model from exterior viewpoints.", "app": "SketchUp", "details": "The Materials tray was no longer visible in the later whole-building view."}, {"start_s": 35406.107, "end_s": 35416.113, "action": "Orbited and zoomed progressively around the building fa\u00e7ade, moving from a balcony-and-door view to a close-up of the wooden door and adjacent wall.", "intent": "Examine fa\u00e7ade details closely.", "app": "SketchUp", "details": "No geometry edit is clearly visible; navigation focused on camera positioning."}, {"start_s": 35416.113, "end_s": 35425.838, "action": "Navigated around the exterior building model with repeated middle-click orbiting and scrolling, moving from a wider balcony view toward a close-up of a door and window.", "intent": "Inspect the modeled exterior and reposition the camera for closer editing.", "app": "SketchUp 2026", "details": "The view ended focused on the door, handle, adjacent window, and balcony."}, {"start_s": 35425.838, "end_s": 35435.837, "action": "Clicked and dragged around the close-up door and balcony geometry, then orbited and scrolled the view; selected model edges and faces became highlighted blue.", "intent": "Select or inspect nearby architectural components while adjusting the camera.", "app": "SketchUp 2026", "details": "The final view showed the door and surrounding geometry selected in blue."}, {"start_s": 35435.837, "end_s": 35445.827, "action": "Continued clicking and dragging near the door and balcony, orbited the model, briefly typed a single character, and activated the Line tool to begin positioning a segment near the lower-right area.", "intent": "Edit or inspect the close-up architectural geometry.", "app": "SketchUp 2026", "details": "The Line tool was active at the end, with a visible endpoint marker and inference guide."}, {"start_s": 35445.827, "end_s": 35454.048, "action": "Pressed Space and later M while adjusting the close-up view, then clicked and dragged on the white door or adjacent face.", "intent": "Switch tools and manipulate or position model geometry near the door.", "app": "SketchUp 2026", "details": "The door remained centered in a translucent close-up view."}, {"start_s": 35454.048, "end_s": 35463.782, "action": "Clicked and dragged near the lower edge of the door, entered spaces, orbited and scrolled the camera, and clicked the model to continue the operation.", "intent": "Continue positioning or editing the door-area geometry.", "app": "SketchUp 2026", "details": "The camera shifted downward and right, leaving the white door face and surrounding frame visible."}, {"start_s": 35463.782, "end_s": 35472.475, "action": "Scrolled and orbited around the door, clicked the lower-left area, typed M, and dragged to move or copy geometry from a corner point.", "intent": "Manipulate the selected architectural element and reposition it in the model.", "app": "SketchUp 2026", "details": "The Move tool was active at the end, showing a green inference point and a distance readout of approximately 1 7/16 inches."}, {"start_s": 35472.475, "end_s": 35481.621, "action": "Entered a distance of 6 inches for the active SketchUp tool, confirmed it with Enter, and began another keyboard entry.", "intent": "Set a precise tool distance.", "app": "SketchUp 2026", "details": "The Distance field visibly showed 6 before confirmation."}, {"start_s": 35481.621, "end_s": 35490.899, "action": "Entered 16 and confirmed the value with Enter in the active Distance field.", "intent": "Set the next precise tool distance.", "app": "SketchUp 2026", "details": "The Distance field showed *16 after entry."}, {"start_s": 35490.899, "end_s": 35500.878, "action": "Scrolled and adjusted the SketchUp view, typed into the active tool, and clicked the modeled face to apply the operation; the face became selected with a stippled highlight and horizontal divisions visible.", "intent": "Position and apply a modeling operation to the selected face.", "app": "SketchUp 2026", "details": "The selected rectangular face remained highlighted and the tool Distance field showed approximately 1 3/8 inches."}, {"start_s": 35500.878, "end_s": 35510.656, "action": "Clicked and dragged repeatedly on the selected face and nearby lower edge, scrolled, and changed the view while continuing the active SketchUp operation.", "intent": "Refine the selected face or its geometry.", "app": "SketchUp 2026", "details": "The face stayed stippled and the camera angle shifted to show the surrounding wall and adjacent structure."}, {"start_s": 35510.656, "end_s": 35520.879, "action": "Entered tool input, clicked and dragged along the lower portion of the selected face, and made repeated clicks including right-clicks while adjusting the view.", "intent": "Continue editing or positioning the selected face geometry.", "app": "SketchUp 2026", "details": "The selected face remained highlighted with horizontal divisions; the Distance field showed approximately 3/16 inch."}, {"start_s": 35520.879, "end_s": 35530.859, "action": "Entered additional tool input, pressed undo three times, then clicked and dragged on the lower face and navigated with middle-mouse clicks and scrolling; the view ended facing a nearby gray surface.", "intent": "Undo recent geometry changes and reposition the model view.", "app": "SketchUp 2026", "details": "The stippled face lost its selection highlight before the final view moved away from the modeled panel."}, {"start_s": 35530.859, "end_s": 35540.15, "action": "Navigated around the SketchUp model with repeated orbit, zoom, and selection inputs, ending with a wall or door-area face selected.", "intent": "Inspect and position the camera around the building model.", "app": "SketchUp 2026", "details": null}, {"start_s": 35540.15, "end_s": 35550.172, "action": "Typed into the active SketchUp input and used the Line tool to place a segment along the lower edge of the selected face, then adjusted the view and continued selecting the geometry.", "intent": "Create or modify a measured line on the building face.", "app": "SketchUp 2026", "details": "The Line tool showed a length of approximately 2' 1/4\"."}, {"start_s": 35550.172, "end_s": 35557.218, "action": "Continued placing and adjusting points along the lower edge of the selected face, entered a character in the active input, and left the face deselected while its boundary remained visible.", "intent": "Refine the geometry or measurement along the face edge.", "app": "SketchUp 2026", "details": null}, {"start_s": 35557.218, "end_s": 35567.01, "action": "Entered a 6-inch measurement and confirmed it, then manipulated the selected edge or face and zoomed/orbited out to view the broader building model.", "intent": "Set a precise six-inch dimension and inspect the resulting model position.", "app": "SketchUp 2026", "details": "The status bar displayed Distance 6\" before the view changed."}, {"start_s": 35567.01, "end_s": 35576.702, "action": "Zoomed and orbited back toward the door and balcony area, then repeatedly clicked the lower edge of the selected wall or face.", "intent": "Inspect the modeled doorway and refine or select its surrounding geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 35576.702, "end_s": 35586.934, "action": "Zoomed and orbited around the selected wall panel, issued several undo-like keyboard inputs, and finished in an exterior view with the door, balcony railing, and selected panel visible.", "intent": "Review the recent geometry changes from multiple exterior angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 35586.934, "end_s": 35591.782, "action": "Scrolled around the SketchUp model, typed \u201ct,\u201d and clicked to place or adjust a guide from the door area toward the right side.", "intent": "Positioned a measurement guide in the model.", "app": "SketchUp", "details": "A green guide line appeared with a displayed length of about 1' 7/8\"."}, {"start_s": 35591.782, "end_s": 35611.782, "action": "Waited with the SketchUp view unchanged while the guide remained visible across the doorway area.", "intent": "Paused to review the guide placement.", "app": "SketchUp", "details": null}, {"start_s": 35611.782, "end_s": 35626.068, "action": "Scrolled and typed \u201cb,\u201d then adjusted the SketchUp window as it resized; the guide remained spanning from the door edge toward the right.", "intent": "Continued positioning or reviewing the guide in the model.", "app": "SketchUp", "details": "The displayed guide length changed during the view adjustment."}, {"start_s": 35626.068, "end_s": 35636.019, "action": "Returned focus to SketchUp, moved and resized the window, then scrolled and used middle-button navigation to orbit or pan away from the close doorway view.", "intent": "Adjusted the workspace and camera view for broader inspection.", "app": "SketchUp", "details": "The view changed from a close doorway detail to a wider exterior perspective."}, {"start_s": 35636.019, "end_s": 35648.088, "action": "Used middle-button navigation and scrolling to zoom out and orbit around the building, changing from the doorway detail to a wider facade and balcony view.", "intent": "Inspected the building exterior from a broader angle.", "app": "SketchUp", "details": "The wooden door, balconies, windows, and exterior walls became visible together."}, {"start_s": 35648.088, "end_s": 35658.169, "action": "Continued orbiting and zooming out, typed \u201cr,\u201d and switched to the line tool before clicking in the model; the view ended on a wider building overview with adjacent structures visible.", "intent": "Set up and began drawing or measuring in the broader model view.", "app": "SketchUp", "details": "The line tool was active with the status prompt to set the first corner."}, {"start_s": 35658.169, "end_s": 35668.249, "action": "Navigated around the SketchUp building model by middle-clicking and scrolling, changing from a close balcony view to a wider view of the building and nearby model elements.", "intent": "Inspect and reposition the 3D model view.", "app": "SketchUp", "details": null}, {"start_s": 35668.249, "end_s": 35678.082, "action": "Zoomed and repositioned the view near the building base, then entered 2'3/4\" into the active rectangle dimensions field.", "intent": "Define the first rectangle dimension precisely.", "app": "SketchUp", "details": "The rectangle tool remained active and the dimensions field showed a partial 2' entry before typing."}, {"start_s": 35678.082, "end_s": 35687.101, "action": "Completed the rectangle dimensions as 2'3/4\", 2'3/4\" and pressed Enter, leaving a small square preview active in the model.", "intent": "Set the rectangle\u2019s length and width.", "app": "SketchUp", "details": "The dimensions field visibly showed 2'3/4\", 2'3 before the final entry and confirmation."}, {"start_s": 35687.101, "end_s": 35698.354, "action": "Selected the small square face, switched to Push/Pull, and began manipulating the face; typed p while working on the object.", "intent": "Prepare the square for extrusion.", "app": "SketchUp", "details": "The square face was selected and the Push/Pull tool status was visible."}, {"start_s": 35698.354, "end_s": 35708.632, "action": "Entered 8'11\" for the Push/Pull distance and pressed Enter, extruding the square into a tall rectangular prism; then clicked and adjusted the view around it.", "intent": "Create a tall 3D rectangular element from the square.", "app": "SketchUp", "details": "The extruded prism was visibly tall, with the distance field showing 8'11\"."}, {"start_s": 35708.632, "end_s": 35718.199, "action": "Repositioned the view around the new prism, selected its face, activated Push/Pull, and typed a 6-inch value while adjusting the extrusion distance.", "intent": "Modify the prism\u2019s geometry with a precise Push/Pull adjustment.", "app": "SketchUp", "details": "The Push/Pull distance field showed approximately 1' 3 9/16\" after the interaction, and the prism remained selected."}, {"start_s": 35718.199, "end_s": 35727.281, "action": "Entered a value and interacted with the tall rectangular face using the active SketchUp editing tool, leaving the face selected and the distance readout at about 8 1/8 inches.", "intent": "Modify the model\u2019s rectangular face with a dimensioned SketchUp tool.", "app": "SketchUp 2026", "details": null}, {"start_s": 35727.281, "end_s": 35737.031, "action": "Entered 6 inches, adjusted the view with scroll and middle-button navigation, and applied the dimensioned operation to the rectangular face.", "intent": "Set the face operation to a 6-inch distance.", "app": "SketchUp 2026", "details": null}, {"start_s": 35737.031, "end_s": 35749.406, "action": "Selected the face, navigated the view, and entered 2 inches before confirming the operation; the rectangular form remained visible in the SketchUp viewport.", "intent": "Apply another measured modification to the model face.", "app": "SketchUp 2026", "details": null}, {"start_s": 35749.406, "end_s": 35760.338, "action": "Zoomed and adjusted the close-up view, entered additional tool input, and placed a guide or measured point on the model; then switched to Windows Explorer.", "intent": "Continue the measured SketchUp edit and move to file browsing.", "app": "SketchUp 2026", "details": "The span ended with an app transition to Windows Explorer."}, {"start_s": 35760.338, "end_s": 35768.393, "action": "Switched to Microsoft Edge and typed 43/4 followed by the text \" means\" into the address/search bar.", "intent": "Search for an inch measurement conversion.", "app": "Microsoft Edge", "details": "The query was being composed in a new tab."}, {"start_s": 35768.393, "end_s": 35778.81, "action": "Completed and submitted the query \"43/4\\\" means hopw many inches\"; waited for Bing results to load and scrolled down to conversion-related results.", "intent": "Find the inch equivalent of the entered measurement.", "app": "Microsoft Edge", "details": "The query contains the visible typo \"hopw\"; results included inch-conversion pages."}, {"start_s": 35778.81, "end_s": 35789.437, "action": "Reviewed the CalcuteMe conversion result for 43/4 inches to feet, scrolled the page, and switched to SketchUp.", "intent": "Verify the inch-to-foot conversion before continuing the model work.", "app": "Microsoft Edge", "details": "The page showed approximately 0.89583333 feet and 43/48 foot."}, {"start_s": 35789.437, "end_s": 35798.04, "action": "Navigated the SketchUp view around a tall, narrow model using scroll and middle-button orbit/pan actions, then entered brief keyboard input.", "intent": "Adjust the model viewpoint for inspection or editing.", "app": "SketchUp 2026", "details": "The view remained focused on a tall narrow solid near the model axes."}, {"start_s": 35798.04, "end_s": 35809.64, "action": "Continued orbiting and panning around the narrow model with middle-button actions and scrolling, changing from a close edge view to a broader angled view.", "intent": "Inspect the model from different angles.", "app": "SketchUp 2026", "details": "The model appeared as a thin rectangular panel with a slanted lower edge."}, {"start_s": 35809.64, "end_s": 35819.264, "action": "Adjusted the view, selected or manipulated geometry near the lower edge, activated the Move tool, and entered a 6-inch distance.", "intent": "Move or copy selected model geometry by a precise distance.", "app": "SketchUp 2026", "details": "The status bar showed Move/copy controls and a distance of 6 inches."}, {"start_s": 35819.264, "end_s": 35829.214, "action": "Entered an asterisk and a 16-inch value, confirmed it, scrolled the view, and began another drag on the model.", "intent": "Apply a repeated or dimensioned geometry operation.", "app": "SketchUp 2026", "details": "The resulting view showed a narrow panel with multiple evenly spaced horizontal divisions."}, {"start_s": 35829.214, "end_s": 35839.346, "action": "Scrolled and orbited around the divided panel, entered a brief keyboard character, and resized the SketchUp window while leaving the model visible.", "intent": "Review the updated panel geometry and adjust the workspace view.", "app": "SketchUp 2026", "details": "The final view showed the tall panel with repeated horizontal lines and a loading indicator after resizing."}, {"start_s": 35839.346, "end_s": 35845.908, "action": "Switched to SketchUp, repositioned the window, and scrolled around the 3D model until the building and a detached slatted panel were visible.", "intent": "Inspect the model and adjust the view.", "app": "SketchUp", "details": "Materials tray was visible; a brief spacebar input occurred."}, {"start_s": 35845.908, "end_s": 35855.789, "action": "Clicked through the Materials tray controls and opened the material category list, while zooming out to view more of the building.", "intent": "Browse available materials while reviewing the model.", "app": "SketchUp", "details": "The category list showed options including Asian Paints Colours of India, Wood, and others."}, {"start_s": 35855.789, "end_s": 35865.4, "action": "Selected the Wood category and browsed its swatches, then clicked a wood material and applied it to the detached slatted panel.", "intent": "Choose a wood finish for the model element.", "app": "SketchUp", "details": "The selected material was shown as Wood_Floor_01_1K before later changes."}, {"start_s": 35865.4, "end_s": 35876.721, "action": "Browsed additional Wood swatches and applied different wood finishes to the upper portion of the slatted panel, changing it from dark wood to a lighter patterned wood.", "intent": "Compare and refine the panel\u2019s wood material.", "app": "SketchUp", "details": "The Materials tray displayed Wood_Veneer_15_1K and later Plywood_01_1K."}, {"start_s": 35876.721, "end_s": 35886.816, "action": "Selected another wood swatch and painted the panel\u2019s upper sections, leaving a dark brown wood finish across the top boards while navigating the close-up view.", "intent": "Continue applying and comparing wood materials on the panel.", "app": "SketchUp", "details": "The active material shown was Wood_Veneer_15_1K."}, {"start_s": 35886.816, "end_s": 35894.889, "action": "Scrolled down the panel, selected its lower face, and used the Push/Pull tool to modify the bottom section; the lower face became highlighted and the distance read approximately 7/16 inch.", "intent": "Modify the panel geometry at its lower edge.", "app": "SketchUp", "details": "The Push/Pull tool was active at the end of the span."}, {"start_s": 35894.889, "end_s": 35904.456, "action": "Entered 0.1 inches and confirmed it, then navigated around the selected lower face with scrolling and orbiting clicks while the Push/Pull tool remained active.", "intent": "Adjust the selected face by a small distance and inspect the model.", "app": "SketchUp 2026", "details": "The lower face remained selected, and the Distance field showed 0 inches by the end."}, {"start_s": 35904.456, "end_s": 35914.512, "action": "Scrolled and orbited around the model to inspect the selected lower face and surrounding frame.", "intent": "Review the face and model geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The selected face stayed visible while the camera moved to a close side view."}, {"start_s": 35914.512, "end_s": 35924.988, "action": "Clicked and dragged around the selected face, used undo twice, and continued scrolling and orbiting to review the model.", "intent": "Inspect or revise the face manipulation while checking the result.", "app": "SketchUp 2026", "details": "The lower face remained selected in the Push/Pull context."}, {"start_s": 35924.988, "end_s": 35935.582, "action": "Switched to the Paint Bucket tool, clicked the lower panel, and navigated around the model while applying the selected wood material.", "intent": "Apply a wood finish to the lower panel.", "app": "SketchUp 2026", "details": "The lower section changed from gray to brown wood while the Materials tray showed Wood_Veneer_15_1K."}, {"start_s": 35935.582, "end_s": 35945.824, "action": "Selected the reddish wood swatch in the Materials tray, then orbited and zoomed around the model while painting additional lower panels.", "intent": "Continue applying the chosen wood material across the lower section.", "app": "SketchUp 2026", "details": "By the end, multiple lower panels were visibly brown wood and the reddish swatch was selected."}, {"start_s": 35945.824, "end_s": 35955.715, "action": "Clicked successive panels and zoomed out while painting the model, extending the brown wood finish upward and across the front.", "intent": "Cover more of the cabinet-like model with the wood material.", "app": "SketchUp 2026", "details": "The final view showed most of the tall front section brown, with one contrasting white horizontal panel remaining."}, {"start_s": 35955.715, "end_s": 35965.79, "action": "Adjusted the SketchUp camera around a selected tall wood-textured panel, zooming in and clicking within the panel while the Materials tray remained open.", "intent": "Inspect or prepare the wood-textured panel for editing.", "app": "SketchUp 2026", "details": "Selected panel displayed with blue edges; material name was Wood_Veneer_15_1K."}, {"start_s": 35965.79, "end_s": 35975.994, "action": "Navigated around the model with orbiting, panning, and zooming, moving from the isolated panel toward the building and changing the camera to a distant overhead view.", "intent": "Reposition the 3D view to locate or inspect the panel in the building model.", "app": "SketchUp 2026", "details": "The wood panel became a thin isolated element before the building came into view."}, {"start_s": 35975.994, "end_s": 35985.778, "action": "Orbited and zoomed around the building, inspecting the isolated dark panel and nearby walls from elevated angles.", "intent": "Review the panel's placement relative to the building geometry.", "app": "SketchUp 2026", "details": "The panel remained visible as a small dark object in the open area beside the building."}, {"start_s": 35985.778, "end_s": 35996.016, "action": "Entered a move/navigation interaction and orbited around the building facade, bringing balconies, doors, and the selected wood panel into a closer exterior view.", "intent": "Inspect or position the wood panel on the building facade.", "app": "SketchUp 2026", "details": "The view ended on a multi-story facade with the wood panel highlighted near an upper doorway."}, {"start_s": 35996.016, "end_s": 36005.355, "action": "Zoomed and orbited toward the upper balcony doorway, closely inspecting the selected wood-paneled section beside the door.", "intent": "Examine the selected wood finish and its placement near the doorway.", "app": "SketchUp 2026", "details": "The selected wood section was shown close-up with blue edges and a visible balcony railing."}, {"start_s": 36005.355, "end_s": 36016.447, "action": "Zoomed under the roof and clicked the wood-paneled surface, leaving the panel selected with move grips visible while inspecting its fit beneath the ceiling.", "intent": "Prepare the selected panel for possible repositioning or adjustment.", "app": "SketchUp 2026", "details": "Close-up showed the selected wood panel beneath a wood ceiling and circular light."}, {"start_s": 36016.447, "end_s": 36027.677, "action": "Navigated around the SketchUp model with repeated middle-button orbiting and scrolling, briefly clicked the viewport, and typed a single \u201cs\u201d; changed from a mostly empty gray view to a closer model view.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 36027.677, "end_s": 36037.98, "action": "Orbit-panned and scrolled through the SketchUp scene, moving from a close architectural view toward a broader exterior view of the building.", "intent": "Review the building model and adjust the camera viewpoint.", "app": "SketchUp 2026", "details": "The building facade, balconies, doors, and surrounding exterior became visible."}, {"start_s": 36037.98, "end_s": 36047.483, "action": "Zoomed and orbited toward a wood-textured surface, clicked it to select it, and typed a single \u201cm\u201d; ended with the wood panel selected and the Move tool active.", "intent": "Inspect or prepare to modify the selected wood-textured model element.", "app": "SketchUp 2026", "details": "Blue selection edges and move grips were visible on the wood surface."}, {"start_s": 36047.483, "end_s": 36058.042, "action": "Continued manipulating the selected wood panel with clicks and scrolling, then orbited and zoomed out to a front-facing view of the multi-story building.", "intent": "Review the selected element in the context of the full building.", "app": "SketchUp 2026", "details": "The final view showed the building facade, balconies, windows, and ground-level wall."}, {"start_s": 36058.042, "end_s": 36068.023, "action": "Orbited and zoomed back toward the building side, clicked a tall wood-paneled section, and activated a scale operation; typed single characters while adjusting the view and left the panel selected with scale grips.", "intent": "Prepare to resize the selected wood-paneled section.", "app": "SketchUp 2026", "details": "The selected panel was outlined in yellow with green scale handles."}, {"start_s": 36068.023, "end_s": 36078.128, "action": "Scrolled and adjusted the camera around the selected panel, dragged a scale handle, and left the Scale tool active with the green scale value at 1.02; then returned to a wider building view.", "intent": "Fine-tune the size of the selected wood-paneled element.", "app": "SketchUp 2026", "details": "The selected wood panel remained highlighted; the Materials tray was still open."}, {"start_s": 36078.128, "end_s": 36088.313, "action": "Scrolled and navigated around the SketchUp building model, clicked near the balcony and wall surfaces, and adjusted the view while the Scale tool remained active before returning to selection.", "intent": "Inspect and position the camera around the building facade.", "app": "SketchUp 2026", "details": "Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 36088.313, "end_s": 36098.77, "action": "Zoomed and repositioned the view around a balcony door and wall, clicked the wooden door/panel area, and adjusted its scale; the status bar showed a green scale value of 1.03.", "intent": "Inspect and slightly resize a selected wooden model element.", "app": "SketchUp 2026", "details": "Close-up view showed the wooden door, horizontal wall trim, and balcony railing."}, {"start_s": 36098.77, "end_s": 36108.561, "action": "Scrolled and orbited around the balcony door, changing from a wider view to a close-up of the wooden door and adjacent slatted panel.", "intent": "Examine the door and surrounding facade from different angles.", "app": "SketchUp 2026", "details": "Orbit tool was active during part of the navigation."}, {"start_s": 36108.561, "end_s": 36118.231, "action": "Orbited and zoomed around the wooden door and facade, moving from a close view of the door to an underside and upper-wall view while keeping the building model in focus.", "intent": "Review the placement and appearance of the wooden facade elements.", "app": "SketchUp 2026", "details": "Materials tray stayed visible; no clear geometry change was confirmed."}, {"start_s": 36118.231, "end_s": 36128.375, "action": "Zoomed out to review the building exterior, then navigated back toward the balcony and selected the vertical slatted wooden panel, which became outlined in blue.", "intent": "Locate and select a specific facade panel for further editing.", "app": "SketchUp 2026", "details": "The final view showed the selected slatted panel beside the balcony door."}, {"start_s": 36128.375, "end_s": 36137.619, "action": "Zoomed and orbited around the selected wooden panel, then began moving or copying it with the Move tool; the panel remained highlighted while the view shifted toward the adjacent wall.", "intent": "Prepare to reposition or duplicate the selected wooden panel.", "app": "SketchUp 2026", "details": "Status bar indicated copying of pre-selected items; no completed placement was visible."}, {"start_s": 36137.619, "end_s": 36147.898, "action": "Selected and repositioned a narrow wood-clad element beneath the overhang, then navigated around the model with middle-button orbiting and scrolling.", "intent": "Adjust the placement and inspect the wood-clad architectural element.", "app": "SketchUp 2026", "details": "The Wood_Veneer_15_1K material is visible, and the selected element remains outlined in blue."}, {"start_s": 36147.898, "end_s": 36156.335, "action": "Orbited and zoomed the view from the underside of the structure to an exterior perspective, keeping the wood-clad wall element selected.", "intent": "Inspect the element\u2019s placement relative to the building exterior.", "app": "SketchUp 2026", "details": "The view changes from a close underside view to a wider exterior view with blue selection edges."}, {"start_s": 36156.335, "end_s": 36166.132, "action": "Continued orbiting and zooming around the building, then switched to the Select tool and left the wood-clad vertical panel visible without the earlier blue outline.", "intent": "Review the modeled facade and selection state.", "app": "SketchUp 2026", "details": "The exterior facade, wood paneling, and adjacent vent are visible."}, {"start_s": 36166.132, "end_s": 36176.389, "action": "Navigated to a close-up, activated Push/Pull, selected the light-colored upper face, and dragged it to change the face depth while viewing the adjacent wood panel.", "intent": "Modify the depth of the selected architectural face.", "app": "SketchUp 2026", "details": "Push/Pull is active; the selected face is stippled and the distance readout changes from 0 to approximately 3 5/16 inches."}, {"start_s": 36176.389, "end_s": 36185.54, "action": "Continued the Push/Pull operation on the selected face, dragging it substantially, then zoomed or orbited out to reveal the separated building model.", "intent": "Extend the selected face and inspect the resulting model context.", "app": "SketchUp 2026", "details": "The distance readout reaches approximately 2 1/4 feet before the view pulls back to the overall model."}, {"start_s": 36185.54, "end_s": 36196.52, "action": "Orbited and zoomed back into the wood-paneled area, selected an edge or face near the lower corner, and activated the Scale tool on the highlighted edge.", "intent": "Prepare to resize or adjust the selected lower architectural element.", "app": "SketchUp 2026", "details": "The final view is a close-up of two adjoining wood surfaces with a lower edge highlighted yellow and scale grips visible."}, {"start_s": 36196.52, "end_s": 36206.64, "action": "Adjusted the view around the selected wood-textured panel and manipulated its scale grips, changing the visible panel framing near the floor and wall corner.", "intent": "Refine the selected wood panel geometry or placement.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Veneer_15_1K while the panel remained selected."}, {"start_s": 36206.64, "end_s": 36216.037, "action": "Continued scaling and repositioning the selected wood-textured panel while orbiting or zooming around its lower corner and adjacent floor area.", "intent": "Fit the wood panel to the surrounding architectural geometry.", "app": "SketchUp 2026", "details": "Scale grips remained visible throughout the close-up edits."}, {"start_s": 36216.037, "end_s": 36226.309, "action": "Zoomed and orbited out from the close-up, then navigated around the building exterior to inspect the edited area from wider views.", "intent": "Review the panel placement in the overall building model.", "app": "SketchUp 2026", "details": "The view changed from a selected close-up to a broad exterior building view and then back toward a facade."}, {"start_s": 36226.309, "end_s": 36236.662, "action": "Navigated back toward the wood door and adjacent wall, selecting and scaling the wood-textured panel near the doorway while changing the camera angle.", "intent": "Adjust the panel dimensions and alignment beside the door.", "app": "SketchUp 2026", "details": "The selected panel showed scale grips and blue guide edges in the close-up."}, {"start_s": 36236.662, "end_s": 36246.958, "action": "Zoomed and orbited around the building facade, inspected the door and wall area, then selected a narrow vertical wood panel beside the door for further editing.", "intent": "Inspect and prepare another wood facade element for adjustment.", "app": "SketchUp 2026", "details": "The final view showed the narrow panel selected beside the door and textured wall."}, {"start_s": 36246.958, "end_s": 36256.236, "action": "Orbiting and zooming continued around the selected vertical panel under the overhang; initiated a copy or move operation and positioned the duplicate preview along the wall.", "intent": "Duplicate or reposition the narrow wood panel on the facade.", "app": "SketchUp 2026", "details": "The status bar indicated a copy-placement operation with a distance readout of approximately 10 feet 7 inches."}, {"start_s": 36256.236, "end_s": 36263.502, "action": "Scrolled around the close-up SketchUp model, then clicked the selected corner geometry to begin moving or copying it.", "intent": "Position or adjust a selected building component.", "app": "SketchUp 2026", "details": "The Materials tray showed Wood_Veneer_15_1K."}, {"start_s": 36263.502, "end_s": 36274.088, "action": "Scrolled extensively while the move/copy operation remained active, changing the view from a close-up corner to an underside and exterior view of the building.", "intent": "Navigate the model while positioning the selected component.", "app": "SketchUp 2026", "details": "The selected geometry and move inference remained visible."}, {"start_s": 36274.088, "end_s": 36283.607, "action": "Orbited and navigated around the building, moving from the underside toward the exterior facade; clicked and dragged near the model while the move tool remained active.", "intent": "Inspect and reposition the selected building element in 3D.", "app": "SketchUp 2026", "details": "The view ended on a wider exterior perspective of the multi-story building."}, {"start_s": 36283.607, "end_s": 36294.301, "action": "Orbited and zoomed out to reveal a wider exterior view of the building and nearby detached structures.", "intent": "Review the overall model from an exterior perspective.", "app": "SketchUp 2026", "details": "The orbit tool status was visible and no geometry change was clearly shown."}, {"start_s": 36294.301, "end_s": 36302.825, "action": "Zoomed and orbited around the building, moving from a close facade view to an angled view showing balconies, doors, windows, and adjacent structures.", "intent": "Inspect exterior building details from multiple viewpoints.", "app": "SketchUp 2026", "details": "The selection tool was active and the Materials tray remained open."}, {"start_s": 36302.825, "end_s": 36310.714, "action": "Orbited the model to a more centered front-facing view of the stacked balconies and wall panels, then scrolled slightly.", "intent": "Continue reviewing the building facade from a centered angle.", "app": "SketchUp 2026", "details": "No definite geometry edit was visible."}, {"start_s": 36310.714, "end_s": 36321.392, "action": "Navigated around the SketchUp building model with repeated middle-button orbiting and scrolling, moving from a close-up facade view to a wider view of balconies and windows.", "intent": "Inspect the exterior model from different angles.", "app": "SketchUp", "details": "Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 36321.392, "end_s": 36331.014, "action": "Orbiting and scrolling repositioned the camera around the building facade, shifting from a close balcony view to a broader view of multiple floors and rooftop elements.", "intent": "Continue reviewing the building exterior.", "app": "SketchUp", "details": "No geometry or material edits were visibly made."}, {"start_s": 36331.014, "end_s": 36344.118, "action": "Orbited and scrolled around the model, settling on an angled view of stacked balconies, doors, windows, and the adjacent wall.", "intent": "Inspect another exterior elevation angle.", "app": "SketchUp", "details": "Materials tray remained visible."}, {"start_s": 36344.118, "end_s": 36354.45, "action": "Used middle-button orbiting and scrolling to pull back from the facade and reveal most of the building, including the roof, rooftop structure, balconies, and ground-level perimeter.", "intent": "Review the overall building form.", "app": "SketchUp", "details": "The model view became progressively wider."}, {"start_s": 36354.45, "end_s": 36364.49, "action": "Continued orbiting and scrolling around the building, changing from a distant front view to a closer elevated view of the facade and rooftop.", "intent": "Examine the front elevation and roof from another viewpoint.", "app": "SketchUp", "details": "No visible edits were applied."}, {"start_s": 36364.49, "end_s": 36374.792, "action": "Orbited and zoomed back toward the facade, ending on a close-up of a window, wooden door, and adjacent wall beneath a balcony.", "intent": "Inspect facade details closely.", "app": "SketchUp", "details": "Materials tray stayed open and the model geometry remained unchanged."}, {"start_s": 36374.792, "end_s": 36385.272, "action": "Orbited and zoomed around the building model, shifting from a front view toward an upper-side perspective while leaving the Materials tray open.", "intent": "Inspect the exterior model from different angles.", "app": "SketchUp 2026", "details": "The view changed from a wider facade view to a closer angled view of the upper floors."}, {"start_s": 36385.272, "end_s": 36394.442, "action": "Zoomed and orbited closer to the upper facade, then adjusted the view to inspect a balcony, wood door, windows, and wall-mounted fixtures.", "intent": "Examine exterior facade details.", "app": "SketchUp 2026", "details": "The camera ended on a close view of an upper-level entrance and adjacent wall."}, {"start_s": 36394.442, "end_s": 36405.07, "action": "Paused on the close facade view and made a small orbit or view adjustment near the balcony and wall.", "intent": "Continue reviewing the facade geometry.", "app": "SketchUp 2026", "details": "No modeling or material-editing result was visible."}, {"start_s": 36405.07, "end_s": 36414.776, "action": "Orbited and zoomed out to recenter the building facade, moving from the close wall view to a wider front elevation and then back toward the central wall.", "intent": "Inspect the building elevation and exterior details.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 36414.776, "end_s": 36424.556, "action": "Scrolled and orbited around the upper floors, alternating between close views of doors, windows, balconies, and wider views of the building front.", "intent": "Review facade elements from multiple viewpoints.", "app": "SketchUp 2026", "details": "The final evidence showed a wider elevated front view of the building."}, {"start_s": 36424.556, "end_s": 36444.295, "action": "Orbited to the opposite side of the building and zoomed toward the rooftop structure and blue-glazed balconies, continuing visual inspection without editing geometry or materials.", "intent": "Inspect the building's rear-side exterior and rooftop details.", "app": "SketchUp 2026", "details": "The view progressed from a high rear-side perspective to a closer rooftop and balcony view."}, {"start_s": 36444.295, "end_s": 36453.953, "action": "Navigated around the SketchUp apartment model with repeated orbit/pan inputs, moving from an exterior view to a close-up of a wood-paneled doorway and balcony.", "intent": "Inspect the building exterior and doorway area.", "app": "SketchUp", "details": "Materials tray showed Wood_Veneer_15_1K."}, {"start_s": 36453.953, "end_s": 36463.991, "action": "Selected and manipulated the vertical wood-paneled element beside the doorway, then navigated upward and outward to an elevated building view while leaving the Move tool active.", "intent": "Adjust or position the wood-paneled architectural element.", "app": "SketchUp", "details": "The selected element was outlined in blue; the distance readout changed during movement."}, {"start_s": 36463.991, "end_s": 36473.279, "action": "Navigated around the building and activated drawing/navigation controls, ending with a circular tool preview visible beside the building.", "intent": "Inspect the model and prepare another geometric operation.", "app": "SketchUp", "details": "A vertical brown panel remained visible beside the building during the navigation."}, {"start_s": 36473.279, "end_s": 36482.977, "action": "Orbited and zoomed around the building side, selected the freestanding wood-paneled object, and began rotating it; the rotation readout reached 15 degrees.", "intent": "Rotate the wood-paneled object for placement beside the building.", "app": "SketchUp", "details": "The object was highlighted blue with the Rotate tool protractor visible."}, {"start_s": 36482.977, "end_s": 36493.063, "action": "Navigated to a wider building view, selected the wood-paneled object, and repositioned it toward the building facade while continuing to inspect the placement.", "intent": "Move the wood-paneled element toward the exterior wall.", "app": "SketchUp", "details": "The panel appeared first freestanding and later selected near the lower facade."}, {"start_s": 36493.063, "end_s": 36504.525, "action": "Orbited and zoomed to the building facade, then moved the selected wood-paneled panel into a vertical position on the wall beside a doorway and balcony.", "intent": "Place the wood-paneled feature on the exterior facade.", "app": "SketchUp", "details": "The final view showed the panel selected and aligned vertically against the wall."}, {"start_s": 36504.525, "end_s": 36514.561, "action": "Orbited and scrolled around the building facade, clicking near the selected wood-clad wall panel while keeping the Materials tray open.", "intent": "Inspect the selected facade panel from different angles.", "app": "SketchUp 2026", "details": "Wood_Veneer_15_1K is visible in the Materials tray."}, {"start_s": 36514.561, "end_s": 36525.441, "action": "Scrolled and adjusted the view, typed \u201cs,\u201d then selected the wood panel and activated the Scale tool, leaving scale grips visible around it.", "intent": "Prepare the facade panel for dimensional adjustment.", "app": "SketchUp 2026", "details": "The selected panel is outlined in yellow with green scale grips."}, {"start_s": 36525.441, "end_s": 36535.503, "action": "Pressed space, clicked and dragged on the selected geometry, then orbited and zoomed out to review the building exterior and facade panel placement.", "intent": "Review the panel in the broader building model.", "app": "SketchUp 2026", "details": "The view changes from a close-up facade to a wider exterior view."}, {"start_s": 36535.503, "end_s": 36545.18, "action": "Orbited and zoomed back toward the facade, selected the wood panel, typed \u201cm,\u201d and dragged a corner or edge to reposition or copy it.", "intent": "Adjust the wood facade panel\u2019s placement.", "app": "SketchUp 2026", "details": "The panel is shown close-up with Move/Copy operation active and a distance readout."}, {"start_s": 36545.18, "end_s": 36556.751, "action": "Scrolled and adjusted the camera around the facade, then clicked and dragged the selected panel to continue moving or copying it.", "intent": "Refine the panel position relative to the wall and balcony.", "app": "SketchUp 2026", "details": "A second wood panel is visible above while the lower panel remains selected."}, {"start_s": 36556.751, "end_s": 36567.561, "action": "Dragged the selected panel and extensively orbited and zoomed out, leaving the panel selected on the building facade for inspection.", "intent": "Verify the adjusted panel placement in context.", "app": "SketchUp 2026", "details": "The final view shows the selected narrow wood panel between balconies and adjacent facade elements."}, {"start_s": 36567.561, "end_s": 36573.357, "action": "Orbited and zoomed the SketchUp camera around the apartment model, moving from a wider view to a close view of the building facade.", "intent": "Inspect the building exterior from different angles.", "app": "SketchUp", "details": "Materials tray remained open with Wood_Veneer_15_1K selected."}, {"start_s": 36573.357, "end_s": 36583.711, "action": "Adjusted the camera view to zoom out and frame the apartment building, rooftop, and nearby structure.", "intent": "Review the overall model composition.", "app": "SketchUp", "details": "No object edits were visible."}, {"start_s": 36583.711, "end_s": 36592.787, "action": "Orbited and zoomed around the model, changing from a front-side view to a wider elevated view that exposed the rooftop and surrounding components.", "intent": "Inspect the model from multiple exterior viewpoints.", "app": "SketchUp", "details": "Materials tray remained visible."}, {"start_s": 36592.787, "end_s": 36603.173, "action": "Moved the camera in toward the opposite side of the apartment building and adjusted the view to examine doors, windows, balconies, and facade panels.", "intent": "Inspect exterior architectural details.", "app": "SketchUp", "details": "No modeling or material change was clearly confirmed."}, {"start_s": 36603.173, "end_s": 36613.165, "action": "Zoomed and orbited upward along the building facade, then activated the Paint Bucket/material sampling workflow on the exterior surface.", "intent": "Inspect the upper facade and prepare to sample or apply a material.", "app": "SketchUp", "details": "The cursor reached the facade while the Materials tray showed Wood_Veneer_15_1K."}, {"start_s": 36613.165, "end_s": 36623.182, "action": "Selected model geometry and navigated around the building while the Paint Bucket/material tool was active, ending on a close view of a facade panel.", "intent": "Work with or inspect facade material assignment.", "app": "SketchUp", "details": "Selected geometry was outlined in blue; the Materials tray showed Material3 with a light textured preview."}, {"start_s": 36623.182, "end_s": 36633.032, "action": "Clicked repeatedly on the building facade and switched to the Paint Bucket tool, then navigated around the model while the Materials tray remained open.", "intent": "Apply or inspect a material on the building facade.", "app": "SketchUp 2026", "details": "Material3 is visible in the Materials tray; the facade view changes during navigation."}, {"start_s": 36633.032, "end_s": 36642.956, "action": "Navigated and zoomed around the upper facade, clicked the large wall, and applied the displayed light marble-like Material3 texture; then zoomed back to review the result.", "intent": "Texture the large upper exterior wall and inspect the applied finish.", "app": "SketchUp 2026", "details": "The right-side wall visibly changes from plain white to a light stone/marble texture."}, {"start_s": 36642.956, "end_s": 36651.197, "action": "Selected and reviewed the upper building section, then navigated down and clicked repeatedly on a lower facade area while keeping the Paint Bucket tool active.", "intent": "Continue applying or checking the selected material on additional facade surfaces.", "app": "SketchUp 2026", "details": "The upper section is outlined when selected; the view ends focused on a plain lower wall."}, {"start_s": 36651.197, "end_s": 36661.038, "action": "Navigated downward across the building, selected a long horizontal trim or ledge, and continued zooming and panning around the facade.", "intent": "Inspect building elements and prepare another surface for material work.", "app": "SketchUp 2026", "details": "The horizontal trim is outlined in blue in the later view."}, {"start_s": 36661.038, "end_s": 36671.624, "action": "Orbit-panned and zoomed out to review the building exterior, then moved to an angled view showing the marble wall and brown vertical wood-clad sections.", "intent": "Review the overall exterior material treatment from multiple angles.", "app": "SketchUp 2026", "details": "The model is shown from a broader three-quarter view and then a closer angled view."}, {"start_s": 36671.624, "end_s": 36681.615, "action": "Clicked repeatedly on a large facade wall with the Paint Bucket tool, selected the wall geometry, and navigated to a side view while continuing material inspection.", "intent": "Apply or verify the material on another large exterior wall.", "app": "SketchUp 2026", "details": "The selected facade is outlined and later appears stippled/selected; Material3 remains shown in the tray."}, {"start_s": 36681.615, "end_s": 36689.767, "action": "Selected and adjusted geometry on the building facade while orbiting or panning the SketchUp view; the long horizontal trim became highlighted.", "intent": "Inspect or select facade geometry for editing.", "app": "SketchUp", "details": "Materials tray remained open with Material3 selected."}, {"start_s": 36689.767, "end_s": 36699.714, "action": "Navigated around the 3D building with repeated scrolling and clicks, changing from a close facade view to a broader front view and leaving horizontal trim selected.", "intent": "Review the building facade and selected architectural element.", "app": "SketchUp", "details": "The building front, balconies, windows, and roofline were visible; Materials tray remained open."}, {"start_s": 36699.714, "end_s": 36709.268, "action": "Used middle-mouse navigation and scrolling to orbit and zoom from the front elevation to an elevated, angled view, then moved closer to the right-side facade.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": "No definite geometry edit was visible; the model remained in SketchUp."}, {"start_s": 36709.268, "end_s": 36718.832, "action": "Continued orbiting and zooming around the right facade, clicking near wall surfaces and issuing several undo-like key presses; the view settled on a close-up of textured wall panels and balconies.", "intent": "Inspect or revise recent facade operations while checking the wall surfaces.", "app": "SketchUp", "details": "Material3 and the textured wall surfaces remained visible."}, {"start_s": 36718.832, "end_s": 36728.798, "action": "Issued additional undo-like key presses, then navigated outward and clicked around the building; the view changed from a close facade to a wider upper-building perspective.", "intent": "Review or revert recent model changes and inspect the result.", "app": "SketchUp", "details": "The building remained visible in an angled 3D view with the Materials tray open."}, {"start_s": 36728.798, "end_s": 36741.611, "action": "Clicked and edited material settings in the Materials tray, entering texture dimensions including 15' and 10'; the wall texture preview changed to a plain light surface, and SketchUp remained active after an app switch.", "intent": "Adjust the selected wall material's texture scale or appearance.", "app": "SketchUp", "details": "Material3 used texture image wall-texture-paint 1.jpg; the Edit panel showed Use texture image enabled and dimension fields."}, {"start_s": 36741.611, "end_s": 36753.389, "action": "Switched to SketchUp and edited the selected material\u2019s texture dimensions, entering and revising values including 20 feet in the Materials tray.", "intent": "Adjust the scale of the wall texture material.", "app": "SketchUp", "details": "Material3 uses texture image wall-texture-paint 1.jpg."}, {"start_s": 36753.389, "end_s": 36763.216, "action": "Selected the texture dimension fields in the Materials tray and replaced their values with 20-foot measurements.", "intent": "Set consistent texture scale dimensions.", "app": "SketchUp", "details": "The texture preview and building facade remained visible while the dimension fields were edited."}, {"start_s": 36763.216, "end_s": 36773.141, "action": "Scrolled through the Materials tray and activated the Paint Bucket tool, leaving the light textured material applied to the large upper facade wall.", "intent": "Prepare and inspect the material application on the building facade.", "app": "SketchUp", "details": "The view zoomed closer to the textured wall."}, {"start_s": 36773.141, "end_s": 36783.142, "action": "Navigated the model view and Materials tray, opened the Wood category, and browsed material swatches while keeping the textured facade visible.", "intent": "Browse available materials for possible application.", "app": "SketchUp", "details": "Undo keystrokes were issued during the review; no definite new material application is visible."}, {"start_s": 36783.142, "end_s": 36792.985, "action": "Adjusted the camera view and edited the selected texture dimensions, changing the visible scale fields from approximately 15 and 10 feet to 20 feet and a revised second value.", "intent": "Refine the wall texture scale.", "app": "SketchUp", "details": "The upper facade remained textured while the lower facade remained untextured."}, {"start_s": 36792.985, "end_s": 36803.391, "action": "Finished editing both texture dimension fields at 20 feet, then navigated and selected within the model, leaving the upper facade with a horizontally stretched light texture.", "intent": "Apply the final texture scale adjustment and inspect the result.", "app": "SketchUp", "details": "The final view shows Material3 and the wall-texture-paint 1.jpg texture in the Materials tray."}, {"start_s": 36803.391, "end_s": 36813.487, "action": "Selected the building\u2019s large exterior wall and applied or sampled the visible Material3 wall texture, leaving the wall highlighted with the paint-bucket tool active.", "intent": "Apply the selected wall-texture material to the building facade.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 36813.487, "end_s": 36823.773, "action": "Navigated around the model with zooming and orbiting, then reviewed the textured facade in a wider front view of the building.", "intent": "Inspect the applied facade material across the building.", "app": "SketchUp 2026", "details": "The right-side facade visibly retained the light textured finish."}, {"start_s": 36823.773, "end_s": 36834.102, "action": "Zoomed and orbited toward the building\u2019s right-side facade, clicked geometry, and left a lower facade and balcony-related group selected for inspection.", "intent": "Inspect facade geometry and material placement at closer scale.", "app": "SketchUp 2026", "details": "Selection outlines and transparent context geometry were visible around the lower facade."}, {"start_s": 36834.102, "end_s": 36844.122, "action": "Adjusted the camera to a frontal view, clicked repeatedly across the lower facade and balcony area, and selected the large right-side wall surface.", "intent": "Review or select facade surfaces for further material editing.", "app": "SketchUp 2026", "details": "The large wall became stippled and outlined in blue while the Materials tray remained open."}, {"start_s": 36844.122, "end_s": 36854.251, "action": "Zoomed and orbited around the front elevation, clicked the lower facade and adjacent balcony elements, and reviewed the resulting textured wall in a wider view.", "intent": "Continue checking material coverage on the lower building facade.", "app": "SketchUp 2026", "details": "The light wall texture was visible on the right-side wall and upper facade."}, {"start_s": 36854.251, "end_s": 36864.261, "action": "Zoomed into the lower right facade, selected edges and surfaces, then orbited outward to an angled overview of the complete building.", "intent": "Inspect the facade detail and confirm the model\u2019s overall appearance.", "app": "SketchUp 2026", "details": "The final view showed the multi-story building with the textured exterior wall and surrounding site geometry."}, {"start_s": 36864.261, "end_s": 36874.181, "action": "Navigated around the apartment model with orbiting, panning, and zooming, then selected geometry near the building facade while the Materials tray remained open.", "intent": "Inspect and select facade elements in the 3D model.", "app": "SketchUp 2026", "details": "The view changed from a wide exterior perspective to a close-up with multiple building edges highlighted blue."}, {"start_s": 36874.181, "end_s": 36884.241, "action": "Continued orbiting and zooming around the building, clicked facade and balcony areas, and activated the Paint Bucket tool to target a balcony surface.", "intent": "Inspect facade surfaces and prepare to apply or sample a material.", "app": "SketchUp 2026", "details": "The final view showed a close balcony with the Paint Bucket cursor and Materials tray displaying Material3."}, {"start_s": 36884.241, "end_s": 36894.574, "action": "Orbited upward and around the building, zoomed between roof and balcony views, and clicked balcony and wall surfaces while keeping the material tool active.", "intent": "Review and potentially apply the selected material to exterior elements.", "app": "SketchUp 2026", "details": "The view ended on a close balcony and door area with the model partially translucent during tool interaction."}, {"start_s": 36894.574, "end_s": 36904.794, "action": "Zoomed and orbited out to frame the upper building and roof, clicked several model elements, and left a larger portion of the building selected within a bounding box.", "intent": "Inspect the overall building and select a group or component for further editing.", "app": "SketchUp 2026", "details": "The view progressed from a close balcony to a front roof view; the final screenshot showed a selected upper building portion."}, {"start_s": 36904.794, "end_s": 36915.114, "action": "Navigated around the model with repeated zooming and orbiting, clicked facade and balcony surfaces, and switched to a rendered exterior view showing the full front elevation.", "intent": "Review the building exterior and assess its appearance from a front perspective.", "app": "SketchUp 2026", "details": "The final view displayed the complete front facade against a blue sky, with the Materials tray still open."}, {"start_s": 36915.114, "end_s": 36924.818, "action": "Orbited around to the rear and side of the building, zoomed in on rear balconies and windows, then clicked facade geometry and left several edges highlighted.", "intent": "Inspect the rear and side facade details in the 3D model.", "app": "SketchUp 2026", "details": "The view ended on a close rear facade with blue-highlighted edges around balconies and wall elements."}, {"start_s": 36924.818, "end_s": 36934.648, "action": "Scrolled and clicked around the building model, then activated Paint Bucket and applied the selected Material3 wall texture to visible facade surfaces while zooming in.", "intent": "Apply or inspect the wall texture on the building facade.", "app": "SketchUp 2026", "details": "Material3 with wall-texture-paint 1.jpg is visible in the Materials tray."}, {"start_s": 36934.648, "end_s": 36944.534, "action": "Continued clicking and painting facade and balcony surfaces, then zoomed and panned to inspect the textured wall and adjacent balcony area.", "intent": "Extend and review the wall-texture application across the facade.", "app": "SketchUp 2026", "details": "The model view moved from a wider facade view to a close-up of balcony and wall surfaces."}, {"start_s": 36944.534, "end_s": 36950.796, "action": "Orbited and panned around the close-up balcony, clicking nearby surfaces while adjusting the view to inspect the wall and railing geometry.", "intent": "Inspect the applied material and facade geometry from different angles.", "app": "SketchUp 2026", "details": "The camera shifted from the balcony corner toward the adjacent wall and window."}, {"start_s": 36950.796, "end_s": 36963.201, "action": "Scrolled and used middle-button navigation to reposition the model, bringing the front facade and multiple balconies into a centered view while continuing material inspection.", "intent": "Review the textured facade in a broader front elevation.", "app": "SketchUp 2026", "details": "The Materials tray remained open and the Paint Bucket tool was active."}, {"start_s": 36963.201, "end_s": 36973.155, "action": "Zoomed and orbited out to show more of the building, then selected and clicked facade and balcony elements while returning to a close view of the front balconies.", "intent": "Inspect and refine material coverage on the building exterior.", "app": "SketchUp 2026", "details": "The first evidence shows a wide exterior view; the final evidence shows selected balcony geometry outlined in blue."}, {"start_s": 36973.155, "end_s": 36983.447, "action": "Continued clicking selected balcony and facade surfaces, adjusted the camera, and used the Paint Bucket on the central balcony divider and adjacent surfaces.", "intent": "Apply or inspect the wall texture on additional balcony components.", "app": "SketchUp 2026", "details": "The view ended on a close-up of two balconies with the central vertical divider and textured lower panels visible."}, {"start_s": 36983.447, "end_s": 36993.061, "action": "Scrolled and navigated around the building fa\u00e7ade, then activated the Paint tool and selected fa\u00e7ade and balcony elements for material editing.", "intent": "Inspect and prepare building surfaces for painting.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 using wall-texture-paint 1.jpg."}, {"start_s": 36993.061, "end_s": 37003.275, "action": "Scrolled and clicked across the upper and middle balcony fa\u00e7ades, selecting multiple connected surfaces while the Paint tool remained active.", "intent": "Apply or inspect the selected wall material on balcony surfaces.", "app": "SketchUp 2026", "details": "Selected geometry was outlined in blue; the Materials tray remained open."}, {"start_s": 37003.275, "end_s": 37013.193, "action": "Undid once, then clicked and dragged across balcony fronts and side faces to paint or sample additional fa\u00e7ade surfaces while panning the model.", "intent": "Continue applying the wall texture to balcony components.", "app": "SketchUp 2026", "details": "The balcony front showed a textured stippled selection during the edits."}, {"start_s": 37013.193, "end_s": 37023.201, "action": "Navigated away from the close-up with middle-button orbiting and scrolling, then zoomed out to review the upper building and rooftop assembly.", "intent": "Review the material edits across a larger portion of the model.", "app": "SketchUp 2026", "details": "The view changed from a balcony close-up to a broader rooftop and fa\u00e7ade view."}, {"start_s": 37023.201, "end_s": 37033.475, "action": "Scrolled and clicked repeatedly on balcony and wall faces, briefly undid an action, then continued painting selected fa\u00e7ade surfaces while repositioning the view.", "intent": "Refine the wall-texture application on the building exterior.", "app": "SketchUp 2026", "details": "A balcony front became visibly textured and selected near the end of the span."}, {"start_s": 37033.475, "end_s": 37043.453, "action": "Clicked and dragged across corner walls, balcony fronts, and adjacent fa\u00e7ade panels while orbiting and scrolling around the building.", "intent": "Extend and inspect the wall material on exterior corner and balcony surfaces.", "app": "SketchUp 2026", "details": "The final view showed textured corner and balcony wall panels with the Materials tray still open."}, {"start_s": 37043.453, "end_s": 37051.459, "action": "Orbited and zoomed around the SketchUp building model, moving from a selected close fa\u00e7ade view to a larger side perspective.", "intent": "Inspect the building exterior from different angles.", "app": "SketchUp 2026", "details": "Materials tray remained open with Material3 selected."}, {"start_s": 37051.459, "end_s": 37061.169, "action": "Zoomed out and orbited the model to show the main multi-story building together with surrounding detached structures.", "intent": "Review the overall model layout.", "app": "SketchUp 2026", "details": "The building became smaller in the scene as the camera pulled back."}, {"start_s": 37061.169, "end_s": 37072.641, "action": "Orbited and zoomed across the model, then moved in closely toward a glazed balcony fa\u00e7ade and window assembly.", "intent": "Inspect exterior fa\u00e7ade and window details.", "app": "SketchUp 2026", "details": "The final view focused tightly on blue-tinted windows behind a balcony railing."}, {"start_s": 37072.641, "end_s": 37082.643, "action": "Navigated along the fa\u00e7ade with repeated clicks and zooming, bringing multiple balcony windows into view and selecting a large wall face.", "intent": "Inspect or select fa\u00e7ade surfaces for material work.", "app": "SketchUp 2026", "details": "A wall area was visibly highlighted in purple in the later view."}, {"start_s": 37082.643, "end_s": 37092.731, "action": "Zoomed and orbited around the building, inspected the upper fa\u00e7ade and rooftop structure, then pulled back to an overall perspective.", "intent": "Review the building exterior and return to an overall view.", "app": "SketchUp 2026", "details": "The final view showed the main building and nearby detached structures."}, {"start_s": 37092.731, "end_s": 37103.385, "action": "Navigated from the overall model toward a close wall and door view, then orbited upward and switched to the Paint Bucket tool over the rooftop and fa\u00e7ade.", "intent": "Prepare to inspect or apply materials to building surfaces.", "app": "SketchUp 2026", "details": "The Materials tray showed Material3 with wall-texture-paint 1.jpg; the final status indicated material painting mode."}, {"start_s": 37103.385, "end_s": 37113.289, "action": "Orbited and zoomed around the upper exterior of the building while using the Paint Bucket tool with the selected wall-texture material visible in the Materials tray.", "intent": "Inspect and position the model while working with the exterior wall material.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 using wall-texture-paint 1.jpg at 20' by 20'."}, {"start_s": 37113.289, "end_s": 37123.489, "action": "Continued orbiting and zooming around the roofline and upper facade, moving from a close view of the parapet to a wider corner view of the building.", "intent": "Review the building exterior from different angles.", "app": "SketchUp 2026", "details": "Paint Bucket remained active and the wall-texture material remained visible."}, {"start_s": 37123.489, "end_s": 37133.029, "action": "Orbited and zoomed farther out to inspect the roof and multiple building faces, ending with a distant elevated perspective.", "intent": "Review the overall exterior geometry and material appearance.", "app": "SketchUp 2026", "details": "No clearly supported geometry edit was visible; interactions primarily changed the camera view."}, {"start_s": 37133.029, "end_s": 37142.888, "action": "Navigated around the rooftop and front facade with repeated orbit and zoom gestures, then moved to a closer view where textured walls, doors, windows, and balconies were visible.", "intent": "Inspect the facade and rooftop from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray stayed open throughout."}, {"start_s": 37142.888, "end_s": 37152.959, "action": "Zoomed and orbited from a close facade view to a wide exterior view of the complete building and surrounding model elements.", "intent": "Review the overall modeled building and its exterior finish.", "app": "SketchUp 2026", "details": "Selection tool was active in the close view; no definite object modification was shown."}, {"start_s": 37152.959, "end_s": 37159.168, "action": "Zoomed and orbited around the building, moving from a distant front view to a closer corner view showing balconies, doors, walls, and the paved entrance area.", "intent": "Continue inspecting the building exterior from another angle.", "app": "SketchUp 2026", "details": "The Materials tray remained open with Material3 visible."}, {"start_s": 37159.168, "end_s": 37171.247, "action": "Scrolled within the SketchUp model view while keeping the apartment building and Materials tray visible.", "intent": "Inspect the 3D model view.", "app": "SketchUp 2026", "details": null}, {"start_s": 37171.247, "end_s": 37180.902, "action": "Middle-clicked and scrolled repeatedly to orbit and zoom out from the apartment building, ending with multiple building components visible in the workspace.", "intent": "Adjust the camera to review the overall model layout.", "app": "SketchUp 2026", "details": null}, {"start_s": 37180.902, "end_s": 37192.18, "action": "Scrolled and middle-dragged to orbit and zoom toward the apartment facade, then opened and browsed material categories in the Materials tray.", "intent": "Inspect the facade while preparing to choose a material.", "app": "SketchUp 2026", "details": "The Materials tray shows categories including Asphalt & Concrete, Brick, Fabric, Glass, Stone, and Wood."}, {"start_s": 37192.18, "end_s": 37205.964, "action": "Clicked through the Materials category controls and changed the visible library from Asphalt & Concrete to Stone while keeping the close facade view.", "intent": "Browse stone materials for the model.", "app": "SketchUp 2026", "details": "The category menu is open during the span and the tray ends on the Stone library."}, {"start_s": 37205.964, "end_s": 37215.867, "action": "Selected a pink marble swatch in the Stone library and used the Paint Bucket on facade surfaces, then navigated the view outward to review the applied appearance.", "intent": "Apply and inspect a marble material on the building facade.", "app": "SketchUp 2026", "details": "The selected material is named Marble_06_1K."}, {"start_s": 37215.867, "end_s": 37226.156, "action": "Scrolled and middle-clicked to orbit around the building, briefly used keyboard input, and clicked the model to select a facade group or component, leaving it outlined in blue.", "intent": "Review the textured model and select a building component.", "app": "SketchUp 2026", "details": "The final view shows a blue selection outline around an upper-floor facade section."}, {"start_s": 37226.156, "end_s": 37235.972, "action": "Orbited and zoomed around the building facade while repeatedly scrolling and clicking to inspect exterior surfaces, balconies, windows, and doors in the SketchUp model.", "intent": "Inspect the modeled facade from changing viewpoints.", "app": "SketchUp 2026", "details": "Materials tray showed Marble_06_1K."}, {"start_s": 37235.972, "end_s": 37245.938, "action": "Zoomed far out to view the building within its model bounds, then navigated back toward a close-up of a window and adjacent door while orbiting and scrolling.", "intent": "Reposition the camera to inspect another facade area.", "app": "SketchUp 2026", "details": "The model remained in the SketchUp viewport with the materials tray open."}, {"start_s": 37245.938, "end_s": 37256.11, "action": "Orbited and zoomed across a close-up facade section, moving from a window and wooden door to another window set against the marble-textured wall.", "intent": "Review facade details from different angles.", "app": "SketchUp 2026", "details": "The paint tool cursor was visible over the model; no definite material change was confirmed."}, {"start_s": 37256.11, "end_s": 37267.134, "action": "Navigated around the model with orbit, pan, and zoom actions, briefly pulling back to show the upper building volume before returning to a frontal view of stacked balconies, doors, windows, and wall fixtures.", "intent": "Inspect the building exterior at both overview and detail scales.", "app": "SketchUp 2026", "details": "Selection and navigation tools were used; the materials tray remained open."}, {"start_s": 37267.134, "end_s": 37277.518, "action": "Continued orbiting and zooming along the facade, then moved into a close-up of a balcony with a window, wooden door, marble wall panels, and vertical wood cladding.", "intent": "Examine another exterior bay and its surface finishes.", "app": "SketchUp 2026", "details": "The materials tray selection changed to Material3 by the end of the span."}, {"start_s": 37277.518, "end_s": 37287.331, "action": "Selected and repeatedly clicked or dragged across the close-up facade area, including the marble wall and window surround, then navigated slightly and left the facade visible with a selected region.", "intent": "Apply or inspect a material on the facade surface.", "app": "SketchUp 2026", "details": "The viewport showed selection highlighting over the wall area; the materials tray displayed Material3."}, {"start_s": 37287.331, "end_s": 37297.319, "action": "Navigated around the building model with scrolls and orbit drags, then used the Materials tray and selected or painted visible facade and balcony surfaces with Material3.", "intent": "Refine facade material application while inspecting the model from a close angle.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 and Stone assets."}, {"start_s": 37297.319, "end_s": 37306.885, "action": "Adjusted the camera around the balcony and window area, selected model geometry, and continued applying or sampling the active material on the visible facade.", "intent": "Inspect and refine materials on the building exterior.", "app": "SketchUp 2026", "details": "The view shifted from a close balcony view to a slightly wider side view."}, {"start_s": 37306.885, "end_s": 37316.457, "action": "Zoomed and orbited out to review the building, then returned to a close view of the balcony, door, and window area while interacting with the model and material controls.", "intent": "Review the exterior design and material placement from multiple viewpoints.", "app": "SketchUp 2026", "details": "The model changed from a wide building view to a close doorway and balcony view."}, {"start_s": 37316.457, "end_s": 37326.655, "action": "Inspected the close facade view and repeatedly clicked the narrow wall or trim beside the window, then adjusted the view and continued material painting on the selected surface.", "intent": "Apply or verify a material on the narrow exterior trim.", "app": "SketchUp 2026", "details": "A narrow vertical surface beside the window became visibly patterned in the final frame."}, {"start_s": 37326.655, "end_s": 37336.989, "action": "Selected several facade elements and orbited or zoomed outward to review the front elevation, ending with a wider view of the building and surrounding models.", "intent": "Review the completed facade treatment in the broader scene.", "app": "SketchUp 2026", "details": "The final view showed the multi-story building front with balconies, doors, windows, and wall materials."}, {"start_s": 37336.989, "end_s": 37347.933, "action": "Orbited and zoomed around the scene to inspect the building from front and side angles, then selected a marble material in the Materials tray while viewing the upper balconies and facade.", "intent": "Inspect the exterior and choose a different material for continued modeling work.", "app": "SketchUp 2026", "details": "The Materials tray ended with Marble_06_1K selected."}, {"start_s": 37347.933, "end_s": 37358.544, "action": "Orbited and zoomed around the apartment building model, changing from a close facade view to a wider angled exterior view.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 37358.544, "end_s": 37367.345, "action": "Zoomed and orbited toward the facade, moving from a wider building view to a close-up of the wall, window, and wooden door.", "intent": "Examine facade details closely.", "app": "SketchUp 2026", "details": "Materials tray remained visible."}, {"start_s": 37367.345, "end_s": 37377.864, "action": "Zoomed and orbited out to review the full building and nearby model, then rotated back toward the side balconies and doors.", "intent": "Review the building placement and exterior sides.", "app": "SketchUp 2026", "details": "The building became semi-transparent during part of the inspection."}, {"start_s": 37377.864, "end_s": 37388.563, "action": "Orbited along the building side and used the materials tool on facade areas, with brief selections and drags around the balcony and wall surfaces.", "intent": "Inspect or adjust facade materials.", "app": "SketchUp 2026", "details": "The materials tray showed Marble_06_1K; selected geometry became translucent during editing."}, {"start_s": 37388.563, "end_s": 37398.131, "action": "Continued orbiting and selecting facade surfaces around the balcony, door, and wall, repeatedly applying or sampling material with the paint tool.", "intent": "Refine or inspect material assignments on the exterior facade.", "app": "SketchUp 2026", "details": "The model remained semi-transparent while surfaces were targeted."}, {"start_s": 37398.131, "end_s": 37408.15, "action": "Zoomed and orbited to another balcony facade, selected wall and window geometry, and continued painting or sampling surfaces with the materials tool.", "intent": "Continue editing exterior materials on the building.", "app": "SketchUp 2026", "details": "Blue outlines marked selected facade geometry near the end."}, {"start_s": 37408.15, "end_s": 37418.251, "action": "Clicked and dragged around the selected balcony fa\u00e7ade, scrolled, and orbited the SketchUp camera to inspect the window and balcony area.", "intent": "Inspect the selected fa\u00e7ade geometry from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray showed Marble_06_1K."}, {"start_s": 37418.251, "end_s": 37428.292, "action": "Activated the Paint Bucket tool, clicked the selected fa\u00e7ade and nearby surfaces, and orbited and zoomed out to view the apartment exterior.", "intent": "Apply or inspect a material on the fa\u00e7ade surfaces.", "app": "SketchUp 2026", "details": "The fa\u00e7ade became stippled/selected while the Materials tray remained visible."}, {"start_s": 37428.292, "end_s": 37438.016, "action": "Scrolled and orbited around the building, clicked fa\u00e7ade and window areas, then zoomed out to review the side elevation and multiple balconies.", "intent": "Review the building model and material placement from wider views.", "app": "SketchUp 2026", "details": "The camera moved from a close balcony view to a wider side perspective."}, {"start_s": 37438.016, "end_s": 37447.011, "action": "Orbited and zoomed across the building while clicking exterior wall and balcony surfaces; the visible fa\u00e7ade surfaces displayed a light textured material.", "intent": "Continue applying or reviewing the fa\u00e7ade material across the exterior.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 with a light stone-like preview."}, {"start_s": 37447.011, "end_s": 37457.662, "action": "Orbited and zoomed around the front and side elevations, inspecting repeated balconies, doors, windows, and textured wall panels before pulling back to a wider building view.", "intent": "Review the completed exterior material appearance from multiple angles.", "app": "SketchUp 2026", "details": "The model showed light textured wall panels and contrasting balcony and window elements."}, {"start_s": 37457.662, "end_s": 37467.692, "action": "Clicked and orbited around the upper fa\u00e7ade, then zoomed out to show the full building and separated model components in the workspace.", "intent": "Inspect the overall building model and surrounding components.", "app": "SketchUp 2026", "details": "The final view showed the complete building, detached floor/room assemblies, and the Materials tray."}, {"start_s": 37467.692, "end_s": 37477.865, "action": "Orbit the SketchUp apartment model with middle-button clicks and repeated scroll input, moving from an angled exterior view toward a more frontal facade view.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 37477.865, "end_s": 37488.557, "action": "Select the pink marble material in the Materials tray, then orbit and zoom around the apartment facade and roof before ending on a wider exterior view.", "intent": "Review the selected material and inspect its appearance on the model.", "app": "SketchUp 2026", "details": "Materials tray shows Marble_06_1K selected."}, {"start_s": 37488.557, "end_s": 37498.31, "action": "Zoom into the facade and click repeatedly on window and wall areas, selecting geometry while moving the camera to a close-up balcony view.", "intent": "Inspect or select facade components for possible material or geometry editing.", "app": "SketchUp 2026", "details": "Facade edges and a window become highlighted during selection."}, {"start_s": 37498.31, "end_s": 37508.724, "action": "Switch to the paint-bucket tool, click facade surfaces repeatedly, and orbit around the balcony and door area while applying or sampling the selected marble material.", "intent": "Apply the selected material to exterior facade surfaces.", "app": "SketchUp 2026", "details": "The paint-bucket cursor is visible and the close-up facade shows pink marble around the window."}, {"start_s": 37508.724, "end_s": 37518.888, "action": "Orbit and zoom around the upper balcony, then click repeatedly on the wall surrounding the window with the paint-bucket tool, leaving the facade surface selected and highlighted.", "intent": "Continue applying the marble material to the balcony facade.", "app": "SketchUp 2026", "details": "The selected surface around the window is outlined in blue at the end."}, {"start_s": 37518.888, "end_s": 37528.793, "action": "Click and paint the close-up facade area around the window, then orbit and zoom back to a broader front view of the building with a rectangular selection box visible.", "intent": "Finish the facade material work and review the result from a wider view.", "app": "SketchUp 2026", "details": "The final view shows the apartment front with the active selection box and Marble_06_1K still in the Materials tray."}, {"start_s": 37528.793, "end_s": 37537.742, "action": "Navigated around the SketchUp building model with repeated orbit, zoom, and pan gestures, moving from a close facade view to a wider front view while the Materials tray remained open.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp", "details": "Material tray showed Marble_06_1K."}, {"start_s": 37537.742, "end_s": 37547.866, "action": "Zoomed and orbited into a close-up of the building facade, then clicked repeatedly around a window and adjacent wall area while changing the camera angle.", "intent": "Inspect or interact with facade surfaces and windows.", "app": "SketchUp", "details": "Close views showed a window, wall surfaces, and the Materials tray."}, {"start_s": 37547.866, "end_s": 37558.012, "action": "Continued clicking and orbiting around the close facade view, examining the window and surrounding marble-textured wall before panning back toward the building exterior.", "intent": "Review facade details and material placement.", "app": "SketchUp", "details": "The visible wall had a pink marble-like texture around the window."}, {"start_s": 37558.012, "end_s": 37567.924, "action": "Entered a character and spaces, then orbited and zoomed out from the facade to inspect the full multi-story building and rooftop structure.", "intent": "Navigate to a broader model view for inspection.", "app": "SketchUp", "details": "The camera moved from the facade to an elevated three-quarter view and then toward the rooftop."}, {"start_s": 37567.924, "end_s": 37578.209, "action": "Orbited and zoomed around the rooftop gate or enclosure, then clicked a surface; the Materials tray changed from Marble_06_1K to Material3.", "intent": "Inspect and possibly sample or apply a different material on the rooftop structure.", "app": "SketchUp", "details": "The final view showed a rooftop enclosure with a barred gate and corrugated roof."}, {"start_s": 37578.209, "end_s": 37587.902, "action": "Orbited and zoomed around the building exterior, moving from a rooftop view to a distant side elevation and then a close view of the lower wall and balcony underside.", "intent": "Continue inspecting the building model from additional exterior angles.", "app": "SketchUp", "details": "Material3 remained selected in the Materials tray."}, {"start_s": 37587.902, "end_s": 37597.68, "action": "Navigated around the apartment exterior with repeated orbiting and zooming, then selected geometry near the ground-level tiled area.", "intent": "Inspect the model and position the view for material or object editing.", "app": "SketchUp 2026", "details": "Materials tray showed Material3 while the camera moved from a wider exterior view to a close-up of the lower facade."}, {"start_s": 37597.68, "end_s": 37607.414, "action": "Continued orbiting and zooming around the building, shifting from the ground-level entrance area to a centered view of the facade and tiled courtyard.", "intent": "Review the building exterior from another angle.", "app": "SketchUp 2026", "details": "The model remained in SketchUp with the Materials tray open and Material3 visible."}, {"start_s": 37607.414, "end_s": 37617.666, "action": "Zoomed tightly onto a balcony door and window, clicked around the facade, and selected the wall or balcony region beside the window.", "intent": "Inspect or prepare a facade surface for material editing.", "app": "SketchUp 2026", "details": "The close-up ended with the wall area around the door and window highlighted/selected."}, {"start_s": 37617.666, "end_s": 37626.844, "action": "Applied or previewed a pink marble material on the wall around the door and window, then orbited and zoomed to inspect the result from a closer angle.", "intent": "Test a different material on the facade surface.", "app": "SketchUp 2026", "details": "The Materials tray showed Marble_06_1K and the previously plain wall appeared pink and marbled."}, {"start_s": 37626.844, "end_s": 37636.244, "action": "Continued selecting and painting facade surfaces around the door and window, then zoomed out and orbited to review the material across multiple balconies.", "intent": "Extend or verify the facade material application.", "app": "SketchUp 2026", "details": "The pink marble finish remained visible around the close-up doorway before the view widened to the building exterior."}, {"start_s": 37636.244, "end_s": 37646.388, "action": "Orbited and zoomed across the apartment facade, clicked several doors, walls, and balcony areas, and ended on a close-up of another doorway with the marble material active.", "intent": "Inspect and continue material editing on additional exterior facade areas.", "app": "SketchUp 2026", "details": "The Materials tray continued to show Marble_06_1K while the camera moved across upper and side facades."}, {"start_s": 37646.388, "end_s": 37656.273, "action": "Navigated around the building facade with orbit, zoom, and pan movements, clicked facade elements, and briefly typed and undid input while inspecting the doorway and window area.", "intent": "Inspect and adjust the view of the building facade.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 37656.273, "end_s": 37666.202, "action": "Selected and painted facade surfaces while orbiting and zooming around the entrance, door, and window; ended with a closer front view showing pink marble wall areas around the door and window.", "intent": "Apply or inspect a marble material on facade surfaces.", "app": "SketchUp 2026", "details": "Paint Bucket tool was active and the Materials tray showed Marble_06_1K."}, {"start_s": 37666.202, "end_s": 37676.209, "action": "Clicked multiple facade faces and orbited outward, changing from a close entrance view to a wider perspective of the building and courtyard.", "intent": "Inspect the facade material and overall building appearance from different views.", "app": "SketchUp 2026", "details": "The view ended on a wider exterior perspective with the door, window, balconies, and courtyard visible."}, {"start_s": 37676.209, "end_s": 37687.506, "action": "Orbited and zoomed around the model from the front courtyard to an elevated side perspective, reviewing multiple balconies, doors, windows, and exterior walls.", "intent": "Review the building exterior from multiple angles.", "app": "SketchUp 2026", "details": "No clear geometry edit was visible; navigation dominated the span."}, {"start_s": 37687.506, "end_s": 37697.284, "action": "Zoomed toward the lower exterior boundary wall, clicked its front face repeatedly, and typed short inputs while changing the view to a close-up of the wall panel.", "intent": "Select and inspect the exterior boundary-wall face for editing or material application.", "app": "SketchUp 2026", "details": "The selected face was visible on the long front boundary wall."}, {"start_s": 37697.284, "end_s": 37707.082, "action": "Selected the long boundary-wall face, activated Push/Pull, entered a distance of 4, and confirmed the input; then orbited and zoomed to inspect the resulting wall geometry.", "intent": "Extrude the selected boundary-wall face by a specified distance.", "app": "SketchUp 2026", "details": "Push/Pull tool was active and the distance field displayed 4; the face remained highlighted."}, {"start_s": 37707.082, "end_s": 37717.658, "action": "Scrolled and navigated the SketchUp view, then selected an upper-left point or edge of the rectangular model and initiated a move/copy operation.", "intent": "Position or edit geometry on the rectangular facade.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K visible."}, {"start_s": 37717.658, "end_s": 37728.657, "action": "Adjusted the view and continued moving the selected geometry along the face; entered 4' and confirmed the distance.", "intent": "Set a precise 4-foot offset for the geometry.", "app": "SketchUp 2026", "details": "The move tool displayed a 4' distance after confirmation."}, {"start_s": 37728.657, "end_s": 37738.47, "action": "Scrolled and orbited around the model to inspect the rectangular feature, then used the move tool on the selected geometry and pressed a control-key shortcut.", "intent": "Inspect and continue positioning the selected model elements.", "app": "SketchUp 2026", "details": "The model was shown from wider and closer exterior views while the move tool remained active."}, {"start_s": 37738.47, "end_s": 37750.056, "action": "Selected the lower-left portion of the rectangular feature, initiated another move, and navigated the view; continued manipulating the selected geometry with the move tool.", "intent": "Adjust the placement of another portion of the rectangular facade.", "app": "SketchUp 2026", "details": "The move distance indicator remained visible during the later view adjustment."}, {"start_s": 37750.056, "end_s": 37759.897, "action": "Entered 7' and confirmed it, then entered *10 and confirmed to repeat the move operation.", "intent": "Apply a 7-foot spacing and repeat the geometry transformation ten times.", "app": "SketchUp 2026", "details": "The view widened to show the building exterior and the rectangular feature during the repeated operation."}, {"start_s": 37759.897, "end_s": 37770.012, "action": "Zoomed and orbited around the building, selected the rectangular perimeter geometry, and made several clicks and drags along its edges while inspecting the result.", "intent": "Review and refine the repeated rectangular facade geometry.", "app": "SketchUp 2026", "details": "The rectangular feature was highlighted in blue in the final exterior views."}, {"start_s": 37770.012, "end_s": 37779.997, "action": "Clicked and scrolled through the SketchUp model, zooming in on the segmented white rectangular structure while the Materials tray remained open.", "intent": "Inspect the model geometry at closer scale.", "app": "SketchUp", "details": "Materials tray showed Marble_06_1K."}, {"start_s": 37779.997, "end_s": 37790.125, "action": "Entered repeated undo keystrokes, scrolled and zoomed around the model, then clicked near the rectangular structure.", "intent": "Adjust the model view and revise recent geometry actions.", "app": "SketchUp", "details": "The view moved from a close-up of a long white surface to a larger framed panel."}, {"start_s": 37790.125, "end_s": 37799.847, "action": "Typed the move-tool shortcut, clicked and navigated around the rectangular panel, and began repositioning geometry along the blue axis.", "intent": "Move or align a selected model element.", "app": "SketchUp", "details": "Move tool was active and the status bar showed a distance of about 14' 15/16\"."}, {"start_s": 37799.847, "end_s": 37810.491, "action": "Entered a distance of 7' and confirmed it, then selected the panel edge and initiated another move operation before typing 2.", "intent": "Set precise dimensions or offsets for the model geometry.", "app": "SketchUp", "details": "The selected geometry remained aligned to the blue axis."}, {"start_s": 37810.491, "end_s": 37820.374, "action": "Corrected the input, entered 6\", and confirmed it; then scrolled and clicked additional edges while continuing the precise move operation.", "intent": "Apply a six-inch adjustment to the selected geometry.", "app": "SketchUp", "details": "The status bar displayed Distance 6\" and the model edges were highlighted blue."}, {"start_s": 37820.374, "end_s": 37831.221, "action": "Clicked repeatedly on the panel edges and selected a narrow rectangular face, leaving it highlighted with a purple stippled selection.", "intent": "Select and refine the target face or component for further editing.", "app": "SketchUp", "details": "The close-up view showed a long white panel with vertical divisions and the left narrow section selected."}, {"start_s": 37831.221, "end_s": 37841.9, "action": "Entered a distance for the active copy operation, navigated by scrolling around the model, entered another distance value, and confirmed it with Enter.", "intent": "Adjust the placement of a copied architectural element.", "app": "SketchUp 2026", "details": "The model showed a long framed facade element with the Move/Copy operation active."}, {"start_s": 37841.9, "end_s": 37852.105, "action": "Entered additional distance values, navigated to a wider view of the building facade, and switched from the active move operation to the Select tool.", "intent": "Position and inspect the copied facade element.", "app": "SketchUp 2026", "details": "The view changed from a close-up to an exterior building view showing the long rectangular facade assembly."}, {"start_s": 37852.105, "end_s": 37862.385, "action": "Scrolled and orbited around the model to inspect the facade from below and front angles, then clicked near the facade and began selecting geometry.", "intent": "Review the facade placement and prepare a geometry selection.", "app": "SketchUp 2026", "details": "The facade remained visible as a long framed panel assembly in front of the building."}, {"start_s": 37862.385, "end_s": 37873.379, "action": "Selected a narrow vertical face or strip, activated Push/Pull, and entered a 4-inch offset while navigating the close-up view.", "intent": "Modify the depth of a selected facade component.", "app": "SketchUp 2026", "details": "The selected vertical strip displayed the visible message \u201cOffset limited to 4\"\u201d."}, {"start_s": 37873.379, "end_s": 37882.771, "action": "Selected the surrounding facade face, activated Push/Pull, navigated the view, and adjusted the face depth to approximately 3/16 inch.", "intent": "Refine the thickness of the facade framing.", "app": "SketchUp 2026", "details": "The facade border was highlighted during Push/Pull, and the distance field showed approximately 3/16 inch."}, {"start_s": 37882.771, "end_s": 37892.062, "action": "Selected successive large facade panels and used Push/Pull interactions while scrolling and repositioning the view; left the final panel selected with a zero-distance state.", "intent": "Continue editing the depth of facade panel faces.", "app": "SketchUp 2026", "details": "Large rectangular panel faces were highlighted in the close-up building facade."}, {"start_s": 37892.062, "end_s": 37901.96, "action": "Scrolled and clicked repeatedly on the modeled wall panels while using the Push/Pull tool, then repositioned the camera to view the long wall and its end.", "intent": "Adjust the wall geometry or inspect panel faces in the SketchUp model.", "app": "SketchUp 2026", "details": "A selected panel displayed the message \u201cOffset limited to 4\"\u201d; the Materials tray showed Marble_06_1K."}, {"start_s": 37901.96, "end_s": 37912.094, "action": "Orbited and zoomed out around the model using middle-click navigation and scrolling, changing from a close wall view to a wider view of the building and detached wall structure.", "intent": "Inspect the modeled wall in relation to the surrounding building.", "app": "SketchUp 2026", "details": "The view ended with the building, courtyard, and detached wall visible; the Select tool was active."}, {"start_s": 37912.094, "end_s": 37922.184, "action": "Changed to the Paint Bucket tool, navigated to the wall, and clicked its faces repeatedly while scrolling and adjusting the view; then switched back to selection and selected the wall assembly.", "intent": "Apply or inspect materials on the wall surfaces.", "app": "SketchUp 2026", "details": "The wall was shown in a textured rendered view, and a human figure component became visible in the scene."}, {"start_s": 37922.184, "end_s": 37932.466, "action": "Used the Paint Bucket tool to click a wall panel and adjacent surfaces, navigated and zoomed around the panel, and left the selected face visibly covered with a pink marble texture.", "intent": "Apply the marble material to a wall panel.", "app": "SketchUp 2026", "details": "The Materials tray showed Marble_06_1K, and the selected rectangular panel displayed the marble texture."}, {"start_s": 37932.466, "end_s": 37942.462, "action": "Continued painting and inspecting the wall from multiple angles, clicking additional panel faces and navigating along the structure; several panels became textured while other faces remained unpainted.", "intent": "Extend the marble material across more wall panels.", "app": "SketchUp 2026", "details": "The wall view showed textured pink-marble panels alongside white panels and framing."}, {"start_s": 37942.462, "end_s": 37952.566, "action": "Clicked successive wall panels with the Paint Bucket tool, applying the marble material across the remaining front panels, then zoomed in on the completed textured section.", "intent": "Finish applying the marble finish to the wall panel sequence.", "app": "SketchUp 2026", "details": "The final view showed the long wall largely covered with pink marble panels; the Materials tray displayed Material3."}, {"start_s": 37952.566, "end_s": 37962.328, "action": "Selected the Paint Bucket tool and clicked or dragged across the stone-clad boundary panels while orbiting and zooming to show a longer section of the wall.", "intent": "Apply or inspect the selected Material3 stone material on the boundary wall.", "app": "SketchUp 2026", "details": "Material3 is visible in the Materials tray; the wall panels appear textured in a pinkish stone finish."}, {"start_s": 37962.328, "end_s": 37972.111, "action": "Continued clicking and dragging across successive wall panels, then orbited and zoomed the camera along the boundary to inspect the applied finish.", "intent": "Extend or verify the stone material across the wall panels.", "app": "SketchUp 2026", "details": "The camera moved along the wall while the textured panels remained visible."}, {"start_s": 37972.111, "end_s": 37982.07, "action": "Clicked around the wall and used middle-button navigation to orbit away from the close-up, revealing the building corner and then a wider exterior view.", "intent": "Inspect the modeled building and boundary wall from different viewpoints.", "app": "SketchUp 2026", "details": "The final view shows the multi-story building and surrounding boundary wall in an elevated perspective."}, {"start_s": 37982.07, "end_s": 37992.123, "action": "Orbited and zoomed around the building perimeter, clicking near wall faces and corners while moving from the side wall toward the far end and exterior surroundings.", "intent": "Review the boundary wall geometry and material from additional angles.", "app": "SketchUp 2026", "details": "The view progresses from a close corner inspection to an end-on view of the wall."}, {"start_s": 37992.123, "end_s": 38002.415, "action": "Navigated around the front of the building with orbit and zoom gestures, clicked near the entrance and boundary elements, and changed to a front exterior view.", "intent": "Inspect the building frontage, entrance area, and boundary-wall finish.", "app": "SketchUp 2026", "details": "The building facade, paved entry area, and wall end posts become visible; Material3 remains selected."}, {"start_s": 38002.415, "end_s": 38011.464, "action": "Used middle-button orbit and scroll gestures to zoom far out and then reposition the camera, revealing the complete building model together with nearby separate structures.", "intent": "Review the overall scene composition and model placement.", "app": "SketchUp 2026", "details": "The final view shows the main building, boundary wall, adjacent low structures, and detached planar elements."}, {"start_s": 38011.464, "end_s": 38021.543, "action": "Orbited and zoomed around the SketchUp building model, changing from an angled exterior view to a more frontal facade view.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": "Materials tray remained open with Material3 selected."}, {"start_s": 38021.543, "end_s": 38031.576, "action": "Continued orbiting and zooming around the building, then zoomed closely onto a balcony facade and selected the Marble_06_1K material.", "intent": "Examine facade details and work with a surface material.", "app": "SketchUp 2026", "details": "The view ended on a close-up of windows, balcony railing, and wall surfaces."}, {"start_s": 38031.576, "end_s": 38041.674, "action": "Selected facade geometry and switched to the Paint Bucket tool, then moved in closer over the balcony and wall area while navigating the model.", "intent": "Prepare to inspect or apply materials to facade surfaces.", "app": "SketchUp 2026", "details": "Selected edges and faces were highlighted blue; Marble_06_1K remained shown in the Materials tray."}, {"start_s": 38041.674, "end_s": 38051.756, "action": "Navigated around the building with repeated orbit and zoom actions, moving from a distant transparent-looking view back to a close-up of the balcony windows and railing.", "intent": "Review the building facade and material appearance from multiple scales.", "app": "SketchUp 2026", "details": "The Paint Bucket tool remained active and the material preview showed Marble_06_1K."}, {"start_s": 38051.756, "end_s": 38061.871, "action": "Adjusted the close-up facade view and used the Paint Bucket tool over the balcony and window area, bringing pink marble-textured wall panels into view.", "intent": "Inspect or apply the selected marble material to facade surfaces.", "app": "SketchUp 2026", "details": "The Materials tray continued to display Marble_06_1K while the facade remained in a close-up view."}, {"start_s": 38061.871, "end_s": 38071.975, "action": "Zoomed out to review the upper building mass, then navigated back toward a close-up balcony and window facade while continuing Paint Bucket interactions.", "intent": "Review the materialized facade in both overall and detailed views.", "app": "SketchUp 2026", "details": "The final view showed a close-up balcony with pale textured walls and glazed railing."}, {"start_s": 38071.975, "end_s": 38083.241, "action": "Navigated around the SketchUp building model with repeated clicks, orbiting, and zooming; moved from a close balcony view to a distant overall view, then issued undo commands.", "intent": "Inspect different scales and views of the building model.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 38083.241, "end_s": 38093.154, "action": "Zoomed and orbited around the building facade, focusing on upper balconies, windows, and wall surfaces while clicking around the model.", "intent": "Examine the facade and balcony geometry closely.", "app": "SketchUp 2026", "details": "Materials tray remained visible on the right."}, {"start_s": 38093.154, "end_s": 38103.173, "action": "Continued orbiting and zooming across the facade, then pulled back to a centered front view of the building.", "intent": "Review the facade from close and frontal perspectives.", "app": "SketchUp 2026", "details": "The model alternated between close-up wall and balcony views and a wider front elevation."}, {"start_s": 38103.173, "end_s": 38113.414, "action": "Orbited and zoomed along the balcony edge and windows; selected model elements, leaving several facade and balcony outlines highlighted in blue before returning to an unhighlighted view.", "intent": "Inspect or select facade components while checking the balcony area.", "app": "SketchUp 2026", "details": "Selection outlines were visible during part of the span."}, {"start_s": 38113.414, "end_s": 38125.041, "action": "Changed to orbit navigation and rotated around the building facade, moving between angled and frontal views of stacked balconies and windows.", "intent": "Review the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "The Materials tray continued to show Marble_06_1K."}, {"start_s": 38125.041, "end_s": 38135.049, "action": "Zoomed and orbited across the exterior, bringing multiple balcony levels and wood-toned soffits into view, then moved to a lower angled close-up of the facade.", "intent": "Inspect exterior finishes and balcony details from different angles.", "app": "SketchUp 2026", "details": "No confirmed material change was visible; the materials tray remained open."}, {"start_s": 38135.049, "end_s": 38145.071, "action": "Navigated around the SketchUp building model with orbiting, scrolling, and clicking, then activated the paint tool and applied or sampled the Marble_06_1K material on the front fa\u00e7ade.", "intent": "Adjust the model view and work on fa\u00e7ade materials.", "app": "SketchUp 2026", "details": "The view changed from an exterior overview to a close-up of the balconies and windows; the Materials tray showed Marble_06_1K."}, {"start_s": 38145.071, "end_s": 38154.887, "action": "Continued orbiting and zooming around the front fa\u00e7ade, clicking several balcony and wall surfaces while the paint tool remained active; the camera shifted upward across multiple floors.", "intent": "Inspect and apply the selected material across fa\u00e7ade surfaces.", "app": "SketchUp 2026", "details": "The front balconies and windows remained visible, with the Materials tray open and Marble_06_1K selected."}, {"start_s": 38154.887, "end_s": 38164.171, "action": "Clicked and dragged across wall and fa\u00e7ade areas, selecting or painting surfaces while moving closer to the balcony structure; finished on a close view beneath an upper balcony.", "intent": "Modify or inspect fa\u00e7ade material coverage.", "app": "SketchUp 2026", "details": "A wall section was visibly highlighted during the sequence, and the paint tool cursor appeared over the fa\u00e7ade."}, {"start_s": 38164.171, "end_s": 38174.131, "action": "Scrolled and orbited around the building, then clicked multiple balcony, wall, and window-adjacent surfaces with the paint tool; repositioned to another front-facing section and left a fa\u00e7ade panel highlighted.", "intent": "Continue material work and inspect coverage on the building exterior.", "app": "SketchUp 2026", "details": "The view moved from a broad front elevation to a lower balcony area; Marble_06_1K remained visible in the Materials tray."}, {"start_s": 38174.131, "end_s": 38185.31, "action": "Clicked and dragged across fa\u00e7ade elements, zoomed and orbited around the balconies, then rotated out to an exterior overview of the building and nearby detached geometry.", "intent": "Review the model and material application from multiple viewpoints.", "app": "SketchUp 2026", "details": "The sequence included close views of balcony windows followed by a wider perspective showing the main building and separate modeled sections."}, {"start_s": 38185.31, "end_s": 38194.253, "action": "Orbited and zoomed around the model using middle-click navigation and scrolling, moving from a side elevation with detached structures to a distant overall view of the building.", "intent": "Review the completed model from different exterior viewpoints.", "app": "SketchUp 2026", "details": "No clear surface edits were visible; the final view showed the whole building small in the SketchUp workspace with the Materials tray still open."}, {"start_s": 38194.253, "end_s": 38203.682, "action": "Scrolled and navigated around the SketchUp building model, then selected a vertical brown wood-textured wall panel with the Move tool.", "intent": "Inspect and prepare a modeled wall panel for repositioning or copying.", "app": "SketchUp 2026", "details": "Materials tray showed Marble_06_1K while the wood panel became selected."}, {"start_s": 38203.682, "end_s": 38213.942, "action": "Dragged the selected wood panel to initiate a copy or move, scrolled and adjusted the view, and left the operation active while viewing the building facade.", "intent": "Position or duplicate the selected facade panel.", "app": "SketchUp 2026", "details": "The status bar indicated placement of copied items and the panel remained selected."}, {"start_s": 38213.942, "end_s": 38223.83, "action": "Rotated the model view around the building and entered 90 followed by Enter during the active transform, then continued adjusting the view.", "intent": "Rotate or orient the selected panel by a specified angle.", "app": "SketchUp 2026", "details": "The Rotate tool and angle guide were visible; the panel was shown separated below the building."}, {"start_s": 38223.83, "end_s": 38233.702, "action": "Scrolled and navigated the camera around the isolated wood panel, selected it, and switched into a move operation.", "intent": "Inspect and reposition the transformed panel relative to the building.", "app": "SketchUp 2026", "details": "The panel remained outlined in blue with transform grips."}, {"start_s": 38233.702, "end_s": 38244.544, "action": "Scrolled outward to view the full building, then moved the selected wood panel toward the facade while continuing to adjust the camera.", "intent": "Place the panel on the building exterior.", "app": "SketchUp 2026", "details": "The full multi-story building became visible and the selected panel was positioned near a side wall."}, {"start_s": 38244.544, "end_s": 38254.808, "action": "Scrolled and orbited closer to the building facade, then continued moving the selected wood panel along the wall area.", "intent": "Fine-tune the panel's placement on the exterior wall.", "app": "SketchUp 2026", "details": "The panel remained selected beside the marble-textured wall and balconies."}, {"start_s": 38254.808, "end_s": 38264.918, "action": "Navigated around the building fa\u00e7ade with repeated middle-button view movements and scrolling, clicked near the wall, and entered short text while positioning the view around the selected vertical louver panel.", "intent": "Inspect and position the fa\u00e7ade detail for editing.", "app": "SketchUp 2026", "details": "The vertical louver panel remained highlighted in blue while the camera view shifted."}, {"start_s": 38264.918, "end_s": 38275.054, "action": "Adjusted the camera around the upper fa\u00e7ade and rooftop with scrolling and middle-button navigation, clicking near the wall and roof areas while keeping the louver panel visible.", "intent": "Review the selected fa\u00e7ade element from different angles.", "app": "SketchUp 2026", "details": "A guide/inference line was visible across the model during the view adjustments."}, {"start_s": 38275.054, "end_s": 38284.513, "action": "Zoomed and navigated tightly onto the louver panel, selected it, and activated the Scale tool so scale grips appeared around the panel.", "intent": "Prepare the louver panel for resizing.", "app": "SketchUp 2026", "details": "The panel was outlined in yellow with green scale handles."}, {"start_s": 38284.513, "end_s": 38293.94, "action": "Continued adjusting the view around the selected panel, then dragged a scale handle and left the Scale tool active with a small scale value shown.", "intent": "Resize or fine-tune the selected fa\u00e7ade panel.", "app": "SketchUp 2026", "details": "The view moved from the full panel to a close-up edge while the scale operation remained active."}, {"start_s": 38293.94, "end_s": 38306.117, "action": "Dragged a scale handle on the selected panel and repeatedly scrolled and navigated around the fa\u00e7ade to inspect the resulting proportions.", "intent": "Refine and review the panel scaling.", "app": "SketchUp 2026", "details": "The louver panel stayed selected and appeared enlarged within the fa\u00e7ade opening."}, {"start_s": 38306.117, "end_s": 38315.274, "action": "Navigated to a broader fa\u00e7ade view, clicked around the panel, and ended with the louver panel visible and selected in blue.", "intent": "Inspect the adjusted panel placement and appearance.", "app": "SketchUp 2026", "details": "The final view showed the louver panel aligned on the upper wall beside the balconies."}, {"start_s": 38315.274, "end_s": 38326.009, "action": "Scrolled and adjusted the selected brown facade panel with clicks and viewport movement, leaving the panel selected with the Move tool active.", "intent": "Inspect or position the selected facade component.", "app": "SketchUp 2026", "details": "Materials tray showed Marble_06_1K."}, {"start_s": 38326.009, "end_s": 38335.743, "action": "Scrolled and adjusted the view around the selected brown facade panel, briefly zooming out to reveal more of the building before returning to a close-up.", "intent": "Inspect the facade component in the building context.", "app": "SketchUp 2026", "details": "The selected panel remained highlighted in blue."}, {"start_s": 38335.743, "end_s": 38346.063, "action": "Orbited and zoomed around the building, then activated the Scale tool and selected an edge of the brown panel for scaling.", "intent": "Prepare to resize the selected facade component.", "app": "SketchUp 2026", "details": "The Scale tool status indicated that scaling had begun."}, {"start_s": 38346.063, "end_s": 38355.837, "action": "Dragged scale grips on the selected brown panel and then zoomed out to review the resulting building model.", "intent": "Resize the facade panel and check the overall model.", "app": "SketchUp 2026", "details": "The panel edges were highlighted yellow with green scale grips before the view changed to the full building."}, {"start_s": 38355.837, "end_s": 38365.456, "action": "Opened the Edit menu, navigated the model view with orbit and zoom gestures, and reviewed the building from closer and wider angles.", "intent": "Inspect the model after editing the facade component.", "app": "SketchUp 2026", "details": "No menu command or additional edit result was visibly confirmed."}, {"start_s": 38365.456, "end_s": 38375.599, "action": "Orbited around the building and zoomed in to inspect its front and side elevations, ending on a closer three-quarter view.", "intent": "Review the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "The model remained visible with the Materials tray open."}, {"start_s": 38375.599, "end_s": 38384.183, "action": "Orbited and zoomed around the apartment building, moving from an overall exterior view to close views of balconies and facade details.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 38384.183, "end_s": 38396.327, "action": "Zoomed out to view the building and surrounding models, then zoomed back toward the building\u2019s front facade.", "intent": "Adjust the camera to compare the building with nearby model components and refocus on its facade.", "app": "SketchUp", "details": "No geometry edits were visible."}, {"start_s": 38396.327, "end_s": 38406.467, "action": "Orbited and zoomed around the apartment building, alternating between broader exterior views and closer views of the front entrance and facade.", "intent": "Review the building exterior and entrance area from multiple angles.", "app": "SketchUp", "details": "The building materials and geometry remained unchanged."}, {"start_s": 38406.467, "end_s": 38415.741, "action": "Zoomed and orbited downward toward the front courtyard, tiled entry area, boundary walls, and lower balconies.", "intent": "Inspect the ground-level entrance and courtyard details.", "app": "SketchUp", "details": "Materials tray remained visible."}, {"start_s": 38415.741, "end_s": 38424.985, "action": "Zoomed back out and orbited around the model, transitioning from a top/front view to a wider three-quarter exterior view.", "intent": "Review the overall building composition and surrounding structures.", "app": "SketchUp", "details": "No modeling or material changes were evident."}, {"start_s": 38424.985, "end_s": 38434.469, "action": "Orbited and zoomed out to show the apartment building with adjacent structures, then clicked the window control and hid the SketchUp application.", "intent": "Finish the visual inspection and leave the modeling application.", "app": "SketchUp", "details": "The final view showed the building and surrounding models at a wider scale; the application became hidden near the end."}, {"start_s": 38434.469, "end_s": 38444.439, "action": "Orbited and zoomed around the SketchUp building model, moving from an exterior view toward a tiled courtyard or floor area.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 38444.439, "end_s": 38452.162, "action": "Orbited and zoomed through the building model to inspect a tiled ground-level interior or courtyard, then briefly typed \u201cr\u201d and clicked in the model.", "intent": "Navigate and inspect the model geometry.", "app": "SketchUp 2026", "details": null}, {"start_s": 38452.162, "end_s": 38462.141, "action": "Navigated tightly along a textured exterior wall with repeated orbiting and zooming, then used the drawing tool to position a line or rectangle endpoint; the displayed dimensions changed during the operation.", "intent": "Draw or measure geometry on the building wall.", "app": "SketchUp 2026", "details": "The drawing tool remained active and the status bar showed dimension values."}, {"start_s": 38462.141, "end_s": 38473.834, "action": "Scrolled and clicked around the wall geometry, used a drawing or selection operation, then switched to the Push/Pull tool and interacted with the wall near a window; typed brief keys before the application window resized and returned to SketchUp.", "intent": "Modify or inspect the wall geometry near the window.", "app": "SketchUp 2026", "details": "The final view showed the Push/Pull tool active with the distance field at 0 inches."}, {"start_s": 38473.834, "end_s": 38484.065, "action": "Returned to the SketchUp model, navigated around the wall, opened the Default Tray Materials panel, and selected or reviewed the material named \u201cMarble_06_1K\u201d; entered \u201c0.3\u201d followed by Enter.", "intent": "Apply or adjust a material and its associated value in the model.", "app": "SketchUp 2026", "details": "The Materials panel displayed the Marble_06_1K material and stone swatches."}, {"start_s": 38484.065, "end_s": 38496.09, "action": "Used the Push/Pull tool while repeatedly zooming and scrolling, then pulled a selected face or region outward; the view ended zoomed out to show the full multi-story building and nearby model elements.", "intent": "Modify the building geometry and review the resulting model at wider scale.", "app": "SketchUp 2026", "details": "The status bar showed Push/Pull instructions and changing distance values."}, {"start_s": 38496.09, "end_s": 38505.056, "action": "Navigated around the SketchUp building model with repeated orbit/pan inputs and selected a face near the tiled walkway, leaving the Push/Pull tool active.", "intent": "Inspect and position the model view for face editing.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K visible."}, {"start_s": 38505.056, "end_s": 38514.966, "action": "Orbited and repositioned the model around the balcony and tiled floor, then selected a long horizontal face near the lower edge for Push/Pull editing.", "intent": "Inspect and prepare another model face for editing.", "app": "SketchUp 2026", "details": "The view ended zoomed closely on a narrow horizontal face."}, {"start_s": 38514.966, "end_s": 38526.777, "action": "Zoomed and orbited extensively away from the building, briefly exposing the wider model scene, then returned toward a close view of a wall and horizontal strip.", "intent": "Navigate the 3D scene and locate geometry for continued editing.", "app": "SketchUp 2026", "details": "Push/Pull remained active and no definite geometry change was visible."}, {"start_s": 38526.777, "end_s": 38536.668, "action": "Orbited around the building facade and tiled courtyard, clicking faces and repositioning the camera until the front patio and balcony were visible.", "intent": "Review the building geometry from different angles.", "app": "SketchUp 2026", "details": "The Materials tray stayed open."}, {"start_s": 38536.668, "end_s": 38547.623, "action": "Navigated around the courtyard with orbit and zoom inputs, then moved into a close view of the patterned tiled floor and adjacent walls.", "intent": "Inspect the courtyard floor and surrounding faces.", "app": "SketchUp 2026", "details": "The model\u2019s tiled surface was clearly visible; no confirmed edit result was shown."}, {"start_s": 38547.623, "end_s": 38557.425, "action": "Clicked and navigated across the courtyard and upper slab, alternating between close and wider views while keeping Push/Pull active; ended focused on the balcony-side wall and foreground slab.", "intent": "Continue inspecting and positioning the building model for face editing.", "app": "SketchUp 2026", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 38557.425, "end_s": 38567.985, "action": "Orbit and pan around the SketchUp building model while zooming and repositioning the view; leave the Materials tray open with Marble_06_1K selected.", "intent": "Inspect the building model from changing viewpoints.", "app": "SketchUp 2026", "details": "The Push/Pull and Orbit tools are visible during navigation."}, {"start_s": 38567.985, "end_s": 38578.542, "action": "Continue orbiting, panning, and zooming around the building exterior, moving from a close wall view to a broader upper-level view.", "intent": "Examine the model geometry from another angle.", "app": "SketchUp 2026", "details": "The Materials tray remains open on the right."}, {"start_s": 38578.542, "end_s": 38590.348, "action": "Navigate extensively around the model with orbit and zoom gestures, passing through close-up wall and balcony views and ending on an exterior corner with doors and windows visible.", "intent": "Review different areas of the building model.", "app": "SketchUp 2026", "details": "No clear material or geometry edit is confirmed; the active operation appears to be view navigation."}, {"start_s": 38590.348, "end_s": 38600.583, "action": "Orbit and zoom away from the building corner into very close wall and ground-plane views, then reposition slightly while keeping the Push/Pull tool active.", "intent": "Inspect model surfaces and edges at varying zoom levels.", "app": "SketchUp 2026", "details": "The Materials tray continues to show Marble_06_1K."}, {"start_s": 38600.583, "end_s": 38609.949, "action": "Pan and orbit around the building perimeter, briefly zooming into the lower wall and railing before pulling back to show the full multi-story building corner.", "intent": "Survey the exterior model and surrounding perimeter.", "app": "SketchUp 2026", "details": "The final view shows the building from an elevated corner perspective."}, {"start_s": 38609.949, "end_s": 38619.95, "action": "Zoom and orbit out to reveal multiple building components, then move back toward a wall and window close-up.", "intent": "Inspect the overall scene and return to a detailed exterior view.", "app": "SketchUp 2026", "details": "The Materials tray remains open and no confirmed material application is visible."}, {"start_s": 38619.95, "end_s": 38630.557, "action": "Scrolled and orbited around the SketchUp model, then clicked to adjust the view and ended on a close-up of the building corner.", "intent": "Inspect the model from different angles.", "app": "SketchUp", "details": "Materials tray remained open with Marble_06_1K selected."}, {"start_s": 38630.557, "end_s": 38639.204, "action": "Orbited and zoomed through the model, used Push/Pull-related interactions on a close-up face, and then zoomed back out to show multiple building structures.", "intent": "Edit or inspect the building geometry.", "app": "SketchUp", "details": "The view changed from a close-up wall/floor area to an overview of several building sections."}, {"start_s": 38639.204, "end_s": 38649.371, "action": "Navigated to a tiled floor area, opened the Materials category list, selected the Tile category, and chose a tile material for the model.", "intent": "Apply or prepare a tile material for the floor area.", "app": "SketchUp", "details": "The Materials tray switched from Stone to Tile, with Tile_Exterior_08_1K visible as the selected material."}, {"start_s": 38649.371, "end_s": 38666.54, "action": "Clicked and dragged across model surfaces to paint the selected tile material, edited the material dimensions in the Materials tray, and continued applying the material to adjacent surfaces.", "intent": "Adjust the tile texture scale and apply it to the model.", "app": "SketchUp", "details": "The material edit panel showed Tile_Exterior_08_1K_alb.png; painted areas changed to a dark textured finish."}, {"start_s": 38666.54, "end_s": 38671.894, "action": "Switched back to the SketchUp window, made additional clicks and drags on the painted surfaces, and used undo and spacebar commands while continuing the material-editing workflow.", "intent": "Refine or undo recent material applications.", "app": "SketchUp", "details": "The close-up remained on the dark painted floor/wall area with the tile material edit panel open."}, {"start_s": 38671.894, "end_s": 38682.003, "action": "Clicked and dragged across the model, collapsed the Materials tray sections, used undo commands, and navigated the view around the tiled area.", "intent": "Review and refine the applied materials and model view.", "app": "SketchUp", "details": "The right tray ended on Tags, Shadows, Scenes, Instructor, and Entity Info with No Selection displayed."}, {"start_s": 38682.003, "end_s": 38702.0, "action": "Navigated the SketchUp view around the multi-story building model with repeated middle-clicks and scroll gestures, then switched to Microsoft Edge.", "intent": "Inspect the SketchUp model from different viewpoints before changing applications.", "app": "SketchUp", "details": null}, {"start_s": 38702.0, "end_s": 38706.331, "action": "Viewed the inches-to-feet conversion page showing that 4 3/4 inches is approximately 0.896 feet, then switched back to SketchUp.", "intent": "Check a measurement conversion.", "app": "Microsoft Edge", "details": "The browser briefly displayed a CalculateMe conversion result and a Bing results page."}, {"start_s": 38706.331, "end_s": 38711.595, "action": "Returned to the SketchUp building model, adjusted the view with scrolling, and opened File > Import so the import submenu was visible.", "intent": "Prepare to import a model or component into the SketchUp scene.", "app": "SketchUp", "details": "The File menu showed the Import option and its 3D Model and 2D Graphic choices."}, {"start_s": 38711.595, "end_s": 38729.831, "action": "Used the SketchUp Import file dialog in Downloads, scrolled through the available model files, changed the selection from a named file to Component_117, and left the dialog open with Import available.", "intent": "Locate and select a SketchUp component for import.", "app": "SketchUp", "details": "The file dialog displayed SketchUp files and a DXF file in Downloads; no completed import is visible."}, {"start_s": 38729.831, "end_s": 38738.095, "action": "Closed or left the import dialog and navigated the SketchUp camera around the building, ending on a closer angled view of its front and side.", "intent": "Resume inspecting the building model after browsing import files.", "app": "SketchUp", "details": null}, {"start_s": 38738.095, "end_s": 38747.75, "action": "Switched to Edge, opened a new tab, replaced the prior search with \u201c3d warehouse,\u201d and displayed Bing results including the official 3D Warehouse links.", "intent": "Search for SketchUp 3D Warehouse models.", "app": "Microsoft Edge", "details": "The search results showed 3D Warehouse, Models - 3D Warehouse, and related SketchUp links."}, {"start_s": 38747.75, "end_s": 38756.354, "action": "Switched among Edge tabs, opened the 3D Warehouse result, and waited for the site to load.", "intent": "Open 3D Warehouse for model searching.", "app": "Microsoft Edge", "details": "The 3D Warehouse landing page began loading."}, {"start_s": 38756.354, "end_s": 38764.853, "action": "Entered \u201c2 way light\u201d in the 3D Warehouse search field and submitted it; reviewed the resulting no-match page and clicked near the search area.", "intent": "Search for a two-way light model.", "app": "Microsoft Edge", "details": "The page reported that no match was found."}, {"start_s": 38764.853, "end_s": 38778.265, "action": "Replaced the query with \u201ctwo way light,\u201d submitted the search, and scrolled through the loading model results.", "intent": "Retry the model search with corrected wording.", "app": "Microsoft Edge", "details": "The Models results page loaded with the query \u201ctwo way light.\u201d"}, {"start_s": 38778.265, "end_s": 38797.209, "action": "Changed the search query to \u201celevation light,\u201d submitted it, and scrolled through the model results before switching applications.", "intent": "Search for elevation light models.", "app": "Microsoft Edge", "details": "Visible results included stage, lobby, and other model cards."}, {"start_s": 38797.209, "end_s": 38814.74, "action": "Scrolled the \u201celevation light\u201d results and switched to SketchUp, bringing an architectural building model into view.", "intent": "Review search results and inspect a model in SketchUp.", "app": "Microsoft Edge and SketchUp", "details": "SketchUp displayed a multi-story building model."}, {"start_s": 38814.74, "end_s": 38824.736, "action": "Continued scrolling through the \u201celevation light\u201d model results in Edge, moving down to additional model cards.", "intent": "Review more elevation light search results.", "app": "Microsoft Edge", "details": "Visible cards included rail, lodge, wall decor light, gateway, lighthouse, and elevator models."}, {"start_s": 38824.736, "end_s": 38833.481, "action": "Scrolled through the 3D Warehouse results, focused the search field, replaced the query with \u201clight,\u201d and submitted it; the results page began loading.", "intent": "Search for 3D Warehouse models related to light.", "app": "Microsoft Edge", "details": "3D Warehouse search changed from \u201celevation light\u201d to \u201clight\u201d."}, {"start_s": 38833.481, "end_s": 38841.256, "action": "Reviewed the loaded \u201clight\u201d model results and scrolled down through the grid; resized the Edge window during browsing.", "intent": "Browse available light models.", "app": "Microsoft Edge", "details": "Visible results included models titled \u201clight,\u201d \u201cLIGHTS,\u201d and related lighting assets."}, {"start_s": 38841.256, "end_s": 38851.101, "action": "Scrolled further through the \u201clight\u201d results and selected a model card near the bottom of the page.", "intent": "Locate and open a potentially suitable lighting model.", "app": "Microsoft Edge", "details": "The selected result was the model titled \u201clighting\u201d by AAmir B."}, {"start_s": 38851.101, "end_s": 38860.463, "action": "Opened the \u201clighting\u201d model page, waited for its details to load, and interacted near the Download control.", "intent": "Inspect the selected lighting model and prepare to download it.", "app": "Microsoft Edge", "details": "The model page showed a lighting display, View In AR, and Download controls."}, {"start_s": 38860.463, "end_s": 38869.792, "action": "Scrolled slightly to view the model details and clicked the Download control area multiple times.", "intent": "Initiate a download of the selected lighting model.", "app": "Microsoft Edge", "details": "The model page displayed the title \u201clighting,\u201d author AAmir B., and engagement controls."}, {"start_s": 38869.792, "end_s": 38885.499, "action": "Waited while the download interaction processed, then clicked again; a modal appeared stating, \u201cCongratulations! You\u2019ve received 5 more downloads for today!\u201d", "intent": "Complete the model download flow.", "app": "Microsoft Edge", "details": "A download-limit/status modal overlay was visible with a close button."}, {"start_s": 38885.499, "end_s": 38891.281, "action": "Opened the 3D Warehouse download menu for the \u201clighting\u201d model, initiated a SketchUp file download, and minimized the Edge window.", "intent": "Download the lighting model and return to the desktop modeling application.", "app": "Microsoft Edge", "details": "The Downloads panel showed a file named beginning \u201c3D+LIGHTNING+-+OUTDOOR+WALL+LIGHT+FIXTURE\u201d."}, {"start_s": 38891.281, "end_s": 38901.182, "action": "Switched to SketchUp and orbited and zoomed around the architectural model, moving from a broad building view toward detached and rooftop components.", "intent": "Inspect the model from different viewpoints.", "app": "SketchUp", "details": null}, {"start_s": 38901.182, "end_s": 38911.076, "action": "Continued orbiting and zooming the SketchUp camera around the multi-story building, ending on a close view of its facade, balconies, doors, and windows.", "intent": "Examine exterior building details.", "app": "SketchUp", "details": null}, {"start_s": 38911.076, "end_s": 38921.184, "action": "Orbited and zoomed through the model, moving from a close-up wall view to the building front and detached structures.", "intent": "Navigate and inspect different areas of the 3D model.", "app": "SketchUp", "details": null}, {"start_s": 38921.184, "end_s": 38931.335, "action": "Adjusted the camera around the building and detached components, then opened the File menu and hovered over Import to reveal the 3D Model, 2D Graphic, and other import options.", "intent": "Prepare to import a downloaded model into SketchUp.", "app": "SketchUp", "details": "The File > Import submenu was visible at the end of the span."}, {"start_s": 38931.335, "end_s": 38941.15, "action": "Opened the SketchUp Import dialog in Downloads, selected the downloaded lighting model entry, then returned to the model and navigated the view with zooming and clicks.", "intent": "Import the downloaded lighting component into the SketchUp scene.", "app": "SketchUp", "details": "The Import dialog showed the downloaded file beginning \u201c3D+LIGHTNING+-+OUTDOOR+WALL+L...\u201d and the status later indicated \u201cPlace component.\u201d"}, {"start_s": 38941.15, "end_s": 38950.388, "action": "Navigated around the SketchUp model with orbit and zoom gestures, then selected and copied a cylindrical object, leaving a duplicate preview positioned beside the original.", "intent": "Duplicate a cylindrical model component.", "app": "SketchUp", "details": "Copy tool remained active with a distance readout visible."}, {"start_s": 38950.388, "end_s": 38960.24, "action": "Zoomed and orbited far away from the component display toward a larger scene containing building models, then exited the active copy operation and returned to selection mode.", "intent": "Navigate the model workspace and cancel or complete the pending copy placement.", "app": "SketchUp", "details": "The view changed from close-up components to distant building geometry."}, {"start_s": 38960.24, "end_s": 38968.81, "action": "Orbited and zoomed back toward the component display, opened a context menu on a selected rectangular component, and continued navigating until the component lineup was visible again.", "intent": "Inspect and manage a model component while repositioning the view.", "app": "SketchUp", "details": "The context menu included component actions such as Erase, Hide, Lock, Explode, and Save Out."}, {"start_s": 38968.81, "end_s": 38978.147, "action": "Adjusted the camera around the wall-mounted component lineup with orbit and zoom gestures, moving from a broad lineup view to a closer view of the cylindrical, framed, and lantern-like objects.", "intent": "Review the arranged model components from different viewpoints.", "app": "SketchUp", "details": "No clear geometry edit was visible; the selected cylindrical object remained highlighted earlier."}, {"start_s": 38978.147, "end_s": 38990.869, "action": "Zoomed and orbited across the wall display to inspect a broader collection of light-fixture-like components, then settled on a closer view of the middle row.", "intent": "Survey and inspect the component collection.", "app": "SketchUp", "details": "The display included cylindrical fixtures, framed housings, lanterns, and wall lamps."}, {"start_s": 38990.869, "end_s": 38999.985, "action": "Continued orbiting and zooming around the component wall, shifting from a frontal lineup view to an angled overview that showed multiple rows of fixtures and the surrounding wall plane.", "intent": "Review the overall arrangement of modeled components.", "app": "SketchUp", "details": "No definitive object modification was visible during this interval."}, {"start_s": 38999.985, "end_s": 39009.939, "action": "Selected a cylindrical component and initiated a copy/move operation, then scrolled extensively to reposition the SketchUp view while the copied component remained active.", "intent": "Position a model component for placement.", "app": "SketchUp 2026", "details": "A cylindrical object was selected with a blue bounding box and copy-placement state visible."}, {"start_s": 39009.939, "end_s": 39019.23, "action": "Scrolled and orbited to the building facade, then continued adjusting the view while the selected cylindrical component and placement guide remained active.", "intent": "Navigate to the target facade area for component placement.", "app": "SketchUp 2026", "details": "The facade with balconies and wall fixtures came into view; the component remained selected."}, {"start_s": 39019.23, "end_s": 39028.963, "action": "Adjusted the camera around the facade and clicked the cylindrical component, leaving it selected against the wall in the closer view.", "intent": "Refine the component's placement or selection on the facade.", "app": "SketchUp 2026", "details": "The selected cylinder was shown centered on the wall with move handles and a placement guide."}, {"start_s": 39028.963, "end_s": 39037.152, "action": "Zoomed and navigated around the facade, then switched back to selection and clicked near the wall component to inspect the overall placement.", "intent": "Review the placed component in the building context.", "app": "SketchUp 2026", "details": "The view widened to show multiple floors, balconies, and the small cylindrical component on the central wall."}, {"start_s": 39037.152, "end_s": 39046.596, "action": "Scrolled and activated the Tape Measure tool, then clicked on the facade to create or position a measurement guide across the wall area.", "intent": "Measure or establish reference geometry on the facade.", "app": "SketchUp 2026", "details": "A guide line and measurement marker appeared across the facade; the status bar indicated guide creation."}, {"start_s": 39046.596, "end_s": 39056.844, "action": "Clicked and typed short input while continuing to navigate, then orbited and zoomed toward the upper wall and wood-clad section with the guide still visible.", "intent": "Adjust and inspect the facade reference guide and surrounding geometry.", "app": "SketchUp 2026", "details": "The final view closely framed the wall vent, cylindrical component, guide line, and wood-clad vertical strip."}, {"start_s": 39056.844, "end_s": 39065.424, "action": "Navigated around the SketchUp building facade with repeated scrolls and clicks, then activated the guide tool and positioned a guide across the wall.", "intent": "Adjust the view and place a construction guide on the facade.", "app": "SketchUp 2026", "details": "The facade, balconies, windows, and a cylindrical wall object remained visible; a horizontal guide was active by the end."}, {"start_s": 39065.424, "end_s": 39077.585, "action": "Zoomed and panned outward across the building facade while keeping the active guide visible, then clicked near the lower facade and continued adjusting the view.", "intent": "Inspect the guide placement and surrounding facade geometry.", "app": "SketchUp 2026", "details": "The view expanded to show multiple floors, balconies, and the ground-level patterned area."}, {"start_s": 39077.585, "end_s": 39088.298, "action": "Adjusted the camera around the central facade with scrolling and clicks, then entered 4' and confirmed it while the guide tool was active.", "intent": "Set a precise guide distance on the building facade.", "app": "SketchUp 2026", "details": "The facade remained centered with guide lines visible; the measurement field showed a guide operation."}, {"start_s": 39088.298, "end_s": 39096.183, "action": "Scrolled and repositioned the view, clicked near the central wall, and continued entering guide-tool values, ending with the guide active across the facade.", "intent": "Continue placing or measuring construction guides.", "app": "SketchUp 2026", "details": "The view showed horizontal and vertical guide lines crossing the facade."}, {"start_s": 39096.183, "end_s": 39106.043, "action": "Scrolled through the facade view, clicked and dragged near the central horizontal division, then entered 4' and confirmed to create or adjust another guide.", "intent": "Add a measured guide to the facade geometry.", "app": "SketchUp 2026", "details": "A vertical guide segment appeared between the horizontal facade divisions, and the status field showed an area measurement during the operation."}, {"start_s": 39106.043, "end_s": 39116.018, "action": "Clicked and dragged near the upper central facade, entered 4' and confirmed, then changed the view and selected the cylindrical wall object with the Move tool.", "intent": "Measure or position another guide, then prepare to move the cylindrical object.", "app": "SketchUp 2026", "details": "The final view was zoomed in on the selected black cylinder, outlined in blue with the Move tool active."}, {"start_s": 39116.018, "end_s": 39125.253, "action": "Navigated around the selected wall-mounted cylindrical object with repeated clicks, drags, and scrolling, then zoomed in on its base while keeping it selected.", "intent": "Inspect or position the selected model component.", "app": "SketchUp 2026", "details": "The selected component remained highlighted in blue; the view moved from a wider wall view to a close-up of its circular base."}, {"start_s": 39125.253, "end_s": 39135.892, "action": "Initiated a copy or move operation on the selected component, adjusted the camera with scrolling, and zoomed out to view the component on the building facade.", "intent": "Place or inspect the selected component in the architectural model.", "app": "SketchUp 2026", "details": "The status bar indicated a copy-placement operation, and the distance field showed a placement distance while the building became visible."}, {"start_s": 39135.892, "end_s": 39143.646, "action": "Clicked and dragged around the selected component and adjusted the view, ending on a close-up of its circular underside against the wall.", "intent": "Refine or inspect the component's placement.", "app": "SketchUp 2026", "details": "The component stayed selected with a blue bounding outline while the camera shifted and zoom level changed."}, {"start_s": 39143.646, "end_s": 39153.704, "action": "Scrolled extensively around the selected component, made brief keyboard inputs, and then zoomed far out to show the broader model layout.", "intent": "Change the viewing context from the component to the overall model.", "app": "SketchUp 2026", "details": "The final view showed several separate building structures and the model axes; the active tool changed to rectangle drawing."}, {"start_s": 39153.704, "end_s": 39160.988, "action": "Opened the tool area, switched to selection-related controls, and zoomed and orbited from the overall model back toward the building facade.", "intent": "Navigate the model and prepare for selecting or editing facade elements.", "app": "SketchUp 2026", "details": "The final view showed the building facade with windows, vents, doors, and balconies; no object was visibly selected."}, {"start_s": 39160.988, "end_s": 39170.928, "action": "Orbited and zoomed around the building exterior, then typed a key and switched to a guide-related tool while ending on a close-up facade view.", "intent": "Inspect the building exterior and position the view for further modeling.", "app": "SketchUp 2026", "details": "The final screen showed a close-up of the upper facade with a vent and a small cylindrical wall element; the status bar indicated guide creation."}, {"start_s": 39170.928, "end_s": 39182.946, "action": "Orbit the SketchUp camera around the multi-story building, clicking and scrolling to inspect it from front and angled views.", "intent": "Inspect the building model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 39182.946, "end_s": 39193.86, "action": "Continue orbiting and zooming around the building, moving from an exterior view into a close-up of the wall surface.", "intent": "Examine model geometry and wall details closely.", "app": "SketchUp 2026", "details": null}, {"start_s": 39193.86, "end_s": 39203.72, "action": "Click and type short entries while working close to the wall, then drag and click to position the active tool on the model.", "intent": "Set up or edit a measurement or drawing operation on the wall.", "app": "SketchUp 2026", "details": "The visible status area shows an active tool with an area readout of 10.54 ft\u00b2."}, {"start_s": 39203.72, "end_s": 39212.102, "action": "Click on the wall, type values including r and 2\", and place a guide or drawing reference across the surface.", "intent": "Specify dimensions and position a construction reference on the wall.", "app": "SketchUp 2026", "details": "A dashed guide/reference line is visible across the wall."}, {"start_s": 39212.102, "end_s": 39222.074, "action": "Enter additional dimension text, confirm it with Enter, and continue positioning a rectangular drawing on the wall.", "intent": "Create or size a small rectangular feature on the wall.", "app": "SketchUp 2026", "details": "The rectangle is highlighted in magenta and the dimensions field shows 2\"."}, {"start_s": 39222.074, "end_s": 39231.574, "action": "Click and drag the small rectangular feature, type short tool inputs, and move it along the wall before activating the Push/Pull tool.", "intent": "Position and begin modifying the new wall feature.", "app": "SketchUp 2026", "details": "The final view shows the small rectangular face selected with Push/Pull active and a distance readout of about 13/16\"."}, {"start_s": 39231.574, "end_s": 39241.645, "action": "Entered 0.5\" and confirmed the distance for the active SketchUp push/pull operation, extending the selected face.", "intent": "Set the extrusion distance for the selected architectural face.", "app": "SketchUp 2026", "details": "Distance field showed 1 before entry; the selected small face remained active."}, {"start_s": 39241.645, "end_s": 39251.626, "action": "Navigated around the model with repeated zoom/scroll input and clicks, repositioning the view around the extended horizontal feature on the building facade.", "intent": "Inspect and position the model view for the next edit.", "app": "SketchUp 2026", "details": "The view changed from a close-up to a broader facade view, with the protruding white element visible."}, {"start_s": 39251.626, "end_s": 39262.124, "action": "Clicked and orbited around the protruding facade element, then repositioned the camera to view its side and end faces more closely.", "intent": "Inspect the modeled extrusion from different angles.", "app": "SketchUp 2026", "details": "The model rotated to an oblique side view and then a close-up of the white rectangular extrusion."}, {"start_s": 39262.124, "end_s": 39272.333, "action": "Entered 0.1\" and confirmed the distance for another push/pull operation, then orbited and zoomed to review the resulting feature on the facade.", "intent": "Apply a small additional extrusion or adjustment to the selected face.", "app": "SketchUp 2026", "details": "The distance field showed approximately 1/8\" after confirmation, and the view returned to an oblique facade view."}, {"start_s": 39272.333, "end_s": 39282.753, "action": "Orbited and zoomed out across the building facade, reviewing balconies, doors, windows, and the adjusted horizontal facade element.", "intent": "Review the architectural model and inspect the edit in context.", "app": "SketchUp 2026", "details": "The view broadened to show multiple stacked balconies and facade details before moving back toward a close-up."}, {"start_s": 39282.753, "end_s": 39293.073, "action": "Orbited and zoomed around the apartment facade, then switched to the Select tool and positioned the view on the balconies and central entrance area.", "intent": "Inspect the completed facade detail from a broader exterior viewpoint.", "app": "SketchUp 2026", "details": "The final view showed the building exterior with balconies, doors, windows, wall fixtures, and the edited horizontal trim."}, {"start_s": 39293.073, "end_s": 39303.697, "action": "Navigated the SketchUp camera around the building exterior with repeated scrolls and middle-clicks, then selected a small area and typed briefly before continuing to adjust the view.", "intent": "Inspect or position the model for further editing.", "app": "SketchUp 2026", "details": null}, {"start_s": 39303.697, "end_s": 39311.639, "action": "Scrolled repeatedly while the Push/Pull tool remained active, moving from a close balcony view to a wider view of the building and model axes.", "intent": "Reposition the view and inspect the building geometry.", "app": "SketchUp 2026", "details": "The Push/Pull tool was active and the distance readout remained visible."}, {"start_s": 39311.639, "end_s": 39321.823, "action": "Continued orbiting and zooming around the building with scrolls and middle-clicks, bringing the balcony and facade into a closer view.", "intent": "Inspect the exterior facade and balcony geometry.", "app": "SketchUp 2026", "details": "The model remained in SketchUp with the Push/Pull tool active."}, {"start_s": 39321.823, "end_s": 39331.164, "action": "Clicked and scrolled through the model, briefly moving to a very close blank surface view before zooming back out to show the building and adjacent structure.", "intent": "Navigate the 3D scene and locate a face for editing.", "app": "SketchUp 2026", "details": "The Push/Pull tool remained selected throughout."}, {"start_s": 39331.164, "end_s": 39342.249, "action": "Scrolled and orbited around the apartment building, moving from a wider exterior view into a close-up of a facade corner and balcony band.", "intent": "Inspect the building exterior from multiple viewpoints.", "app": "SketchUp 2026", "details": "No confirmed geometry change was visible; navigation dominated the span."}, {"start_s": 39342.249, "end_s": 39353.069, "action": "Selected a narrow face with the Push/Pull tool and entered 0.1 followed by Enter, changing the visible distance readout to 0.1 while remaining zoomed in on the facade corner.", "intent": "Apply a small Push/Pull adjustment to the selected face.", "app": "SketchUp 2026", "details": "The final view shows the narrow face highlighted and the distance field set to 0.1."}, {"start_s": 39353.069, "end_s": 39363.488, "action": "Adjusted the SketchUp camera by orbiting, zooming, and panning around the building fa\u00e7ade, moving from a close balcony view to a wider exterior view.", "intent": "Inspect the exterior model from different viewpoints.", "app": "SketchUp", "details": "The Push/Pull tool remained active; no clear geometry change was visible."}, {"start_s": 39363.488, "end_s": 39373.367, "action": "Continued orbiting, zooming, and panning around the SketchUp model, briefly viewing the full building and surrounding structures before moving very close to a side wall.", "intent": "Navigate the 3D model for inspection.", "app": "SketchUp", "details": "No definite modeling edit was visible."}, {"start_s": 39373.367, "end_s": 39384.257, "action": "Navigated along the model with repeated zoom and pan movements, then clicked and dragged on a wall or edge while the Push/Pull tool was active; ended with a close view of a selected horizontal face.", "intent": "Inspect or prepare a wall face for editing.", "app": "SketchUp", "details": "The selected face was highlighted, but the resulting geometry change was not clear."}, {"start_s": 39384.257, "end_s": 39393.978, "action": "Selected and manipulated a wall edge or face, switched tools, and entered a 0.1-inch value followed by Enter in the SketchUp measurements box.", "intent": "Apply a small precise modeling adjustment.", "app": "SketchUp", "details": "The final numeric entry was 0.1 inch; the exact edited feature was not identifiable."}, {"start_s": 39393.978, "end_s": 39401.168, "action": "Entered a character, selected and manipulated another edge or face, then zoomed and orbited away from the close-up to a balcony and fa\u00e7ade view.", "intent": "Continue adjusting and reviewing the model geometry.", "app": "SketchUp", "details": "The Push/Pull tool remained visible and the exact effect of the edit was unclear."}, {"start_s": 39401.168, "end_s": 39411.351, "action": "Zoomed and orbited around the building exterior, moving from a balcony close-up to a wider front-fa\u00e7ade view with multiple balconies and wall fixtures.", "intent": "Review the updated exterior from a broader viewpoint.", "app": "SketchUp", "details": "No additional definite geometry edit was visible."}, {"start_s": 39411.351, "end_s": 39420.287, "action": "Scrolled repeatedly through the SketchUp model, clicked near the right edge of the white panel, and continued scrolling to adjust the view.", "intent": "Inspect or reposition the 3D model view.", "app": "SketchUp 2026", "details": "The view remained focused on a wood-textured panel, white trim, and adjacent gray geometry."}, {"start_s": 39420.287, "end_s": 39430.607, "action": "Selected the upper white face, clicked and dragged near its right edge, typed \u201cm,\u201d and began moving the selected geometry with the Move tool.", "intent": "Select and reposition a model element.", "app": "SketchUp 2026", "details": "The upper face became highlighted, and the Move tool showed an active preview with a distance readout."}, {"start_s": 39430.607, "end_s": 39439.513, "action": "Entered a 0.1-inch value and confirmed it, then activated Push/Pull and manipulated the selected white face while scrolling around the model.", "intent": "Adjust the thickness or position of the selected face.", "app": "SketchUp 2026", "details": "The white panel\u2019s right edge and side face changed visibly as Push/Pull remained active."}, {"start_s": 39439.513, "end_s": 39451.943, "action": "Scrolled and clicked around the model, then used middle-button navigation to orbit or pan toward the right-side gray structure while keeping Push/Pull active.", "intent": "Inspect the adjusted geometry from different viewpoints.", "app": "SketchUp 2026", "details": "The camera moved from a close-up of the wood panel and narrow white edge to a broader view of the gray side structure."}, {"start_s": 39451.943, "end_s": 39462.108, "action": "Navigated around the model with repeated middle-button clicks and scrolling, selected the narrow white side face, and dragged it with Push/Pull to modify its extent.", "intent": "Edit the narrow side face and inspect the resulting geometry.", "app": "SketchUp 2026", "details": "The selected white strip along the right edge became more prominent and extended outward in the view."}, {"start_s": 39462.108, "end_s": 39472.203, "action": "Scrolled and orbited around the model, then continued inspecting the edited white side panel and gray structure from multiple angles.", "intent": "Review the recent 3D geometry adjustment.", "app": "SketchUp 2026", "details": "The final view showed the white side panel projecting from the gray structure beside the wood-textured panel."}, {"start_s": 39472.203, "end_s": 39482.223, "action": "Selected the narrow wall-side geometry, repeatedly adjusted the view, and began moving the selected elements with the Move tool.", "intent": "Refine and reposition selected building-model geometry.", "app": "SketchUp 2026", "details": "The selected faces remained highlighted, and the Move tool distance field was visible."}, {"start_s": 39482.223, "end_s": 39492.014, "action": "Continued navigating and zooming around the model, then selected geometry near the upper wall edge and initiated another move operation.", "intent": "Inspect and adjust the placement of building-model elements.", "app": "SketchUp 2026", "details": "The view changed from a close-up selected edge to an exterior facade with balconies and doors."}, {"start_s": 39492.014, "end_s": 39501.941, "action": "Entered 0.1 and confirmed it, opened a context menu on the selected geometry, and navigated to another facade area while continuing view adjustments.", "intent": "Apply a precise dimension or movement to selected geometry and inspect the result.", "app": "SketchUp 2026", "details": "The context menu included Entity Info, Hide, Make Group, and face-editing options."}, {"start_s": 39501.941, "end_s": 39511.23, "action": "Navigated and zoomed around the exterior facade using middle-button view controls, moving from a broader balcony view to a closer view of the wall and balcony junction.", "intent": "Inspect the modeled facade and verify geometry placement.", "app": "SketchUp 2026", "details": "No distinct geometry-edit result was visible during the view navigation."}, {"start_s": 39511.23, "end_s": 39525.786, "action": "Selected and manipulated geometry near the balcony edge, then extensively zoomed and panned around the facade and wall junction.", "intent": "Continue inspecting or refining the selected architectural elements.", "app": "SketchUp 2026", "details": "The Move/Push-Pull-style distance readout appeared during the close-up inspection."}, {"start_s": 39525.786, "end_s": 39535.797, "action": "Selected geometry along the building edge, navigated to a close side view, and continued adjusting the view around the large wall surface.", "intent": "Inspect the side geometry and its alignment with the building facade.", "app": "SketchUp 2026", "details": "The final view showed a large light-gray wall surface with a narrow highlighted side face."}, {"start_s": 39535.797, "end_s": 39545.129, "action": "Clicked and dragged on the close-up building geometry, then scrolled and typed \u201cm\u201d; selected the long trim-like face and initiated a move operation, leaving it highlighted.", "intent": "Adjust the position of a selected building component.", "app": "SketchUp", "details": "The selected geometry remained highlighted and the Move tool status showed a distance of about 1/16 inch."}, {"start_s": 39545.129, "end_s": 39554.744, "action": "Scrolled through the model view while the selected trim geometry remained active, then pressed Space; the view revealed the selected L-shaped trim around the building corner and subsequently a broader facade view.", "intent": "Inspect the selected component and its placement from different viewpoints.", "app": "SketchUp", "details": "The geometry remained blue-highlighted during inspection; no confirmed placement change was visible."}, {"start_s": 39554.744, "end_s": 39566.001, "action": "Used middle-button navigation and scrolling to orbit and reposition the camera around the building facade, then clicked near the model geometry.", "intent": "Examine another area of the building model.", "app": "SketchUp", "details": "The view shifted from a balcony corner to a close-up of doors, windows, and facade surfaces."}, {"start_s": 39566.001, "end_s": 39575.958, "action": "Clicked and dragged on the model, navigated with middle-button and scroll actions, and repositioned the camera to a wider frontal view of the stacked balconies and facade.", "intent": "Review the building facade and surrounding architectural elements.", "app": "SketchUp", "details": "The final view showed multiple floors, balconies, doors, windows, facade panels, and exterior fixtures."}, {"start_s": 39575.958, "end_s": 39588.503, "action": "Continued orbiting and scrolling around the building, then typed \u201cb\u201d; SketchUp resized its window and ended on a wider exterior view of the building.", "intent": "Survey the overall model from a broader angle.", "app": "SketchUp", "details": "The model was shown with a blue sky background and the full multi-story facade more clearly visible after resizing."}, {"start_s": 39588.503, "end_s": 39598.282, "action": "Returned focus to SketchUp, navigated the exterior model, opened the Materials tray controls, and expanded the material category list.", "intent": "Prepare to choose or apply a different material.", "app": "SketchUp", "details": "The Default Tray was visible; the Materials category menu listed options including Asian Paints Whites, Metal, Stone, Tile, and Wood."}, {"start_s": 39598.282, "end_s": 39609.358, "action": "Selected several yellow and green materials in the Materials tray while remaining in Paint mode, then scrolled and clicked in the model view.", "intent": "Review and choose facade materials for painting.", "app": "SketchUp 2026", "details": "The building remained visible while material swatches and the selected material name changed."}, {"start_s": 39609.358, "end_s": 39619.614, "action": "Scrolled through the model, used keyboard input, then switched to Select and clicked the building edge until a narrow trim face was selected.", "intent": "Navigate to and select a specific building trim element.", "app": "SketchUp 2026", "details": "The view ended zoomed in on a corner with the trim highlighted blue."}, {"start_s": 39619.614, "end_s": 39629.672, "action": "Activated a modeling tool with the middle mouse button and typed a shortcut, then dragged and scrolled around the selected trim while repositioning the camera.", "intent": "Inspect or prepare the selected trim for a modeling operation.", "app": "SketchUp 2026", "details": "The trim remained selected and the view shifted toward the balcony facade."}, {"start_s": 39629.672, "end_s": 39641.334, "action": "Used middle-mouse orbiting and extensive scrolling to rotate and zoom out around the building, keeping the trim highlighted while changing the camera to a broader facade view.", "intent": "Inspect the selected trim in the context of the building facade.", "app": "SketchUp 2026", "details": "The camera moved from a close balcony corner to a wider view of multiple floors."}, {"start_s": 39641.334, "end_s": 39651.64, "action": "Scrolled farther out and orbited the model to an overall exterior view, then clicked with the middle mouse button while the modeling tool remained active.", "intent": "Review the building and surrounding geometry from a wider perspective.", "app": "SketchUp 2026", "details": "The final view showed the whole building, site elements, and a blue selected path or edge near the ground."}, {"start_s": 39651.64, "end_s": 39660.38, "action": "Clicked and typed shortcuts, navigated across the scene, then selected and manipulated a long ground-level slab or edge with the active modeling tool.", "intent": "Work on the selected site-level geometry.", "app": "SketchUp 2026", "details": "The final screenshot showed a long rectangular element highlighted blue with the tool distance field at 0 inches."}, {"start_s": 39660.38, "end_s": 39670.428, "action": "Navigated around the SketchUp building model with repeated scrolls and middle-clicks, moving the view from a balcony and courtyard toward open space.", "intent": "Inspect the 3D model from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 39670.428, "end_s": 39680.55, "action": "Scrolled and middle-clicked repeatedly to orbit and reposition the view around the building facade, courtyard, tiled floor, and front boundary wall.", "intent": "Examine the exterior model geometry from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 39680.55, "end_s": 39689.814, "action": "Moved closer to the front boundary wall, entered a short command, selected the Push/Pull tool, and adjusted a long wall face; the distance field showed approximately 11/16 inch and later 9/16 inch.", "intent": "Modify or inspect the thickness of the selected wall face.", "app": "SketchUp 2026", "details": "Push/Pull tool was active."}, {"start_s": 39689.814, "end_s": 39699.836, "action": "Scrolled and middle-clicked to zoom out and orbit around the multi-story building, then entered a short key and dragged near an upper facade edge; the view ended with a guide-placement state and a length of about 1 1/8 inches.", "intent": "Inspect the facade and position a guide or measurement reference.", "app": "SketchUp 2026", "details": "Guide placement was active at the end of the span."}, {"start_s": 39699.836, "end_s": 39709.489, "action": "Scrolled and orbited around the building facade, then entered a short key and dragged near a balcony edge; the view moved into a close-up of the balcony and wall junction with guide placement active.", "intent": "Inspect and align facade or balcony geometry using a guide.", "app": "SketchUp 2026", "details": "The close-up showed balcony rails, wall trim, and guide inference markers."}, {"start_s": 39709.489, "end_s": 39718.762, "action": "Entered 1'8", "intent": "Set the guide distance to 1 foot 8 inches, then confirmed it and orbited the model slightly around the balcony and courtyard.", "app": "SketchUp 2026", "details": "The Length field displayed 1'8\" before the final view adjustment."}, {"start_s": 39718.762, "end_s": 39728.694, "action": "Scrolled around the SketchUp model and clicked to position a guide on the building facade.", "intent": "Position a guide for model inspection or measurement.", "app": "SketchUp 2026", "details": "The view remained focused on the apartment building, with a guide visible near the balcony."}, {"start_s": 39728.694, "end_s": 39737.792, "action": "Entered a guide distance of 1'8\" and confirmed it, then navigated the camera from a close facade view to a wider view of the building and surrounding models.", "intent": "Set the guide location and review the model at different scales.", "app": "SketchUp 2026", "details": "The guide tool remained active and the resulting wide view showed the full apartment building."}, {"start_s": 39737.792, "end_s": 39748.972, "action": "Scrolled extensively to adjust the camera around the building, then clicked and dragged with the middle mouse button, ending in a very distant view of the model set.", "intent": "Navigate and inspect the 3D scene.", "app": "SketchUp 2026", "details": "The final view showed the building and nearby structures small near the model origin."}, {"start_s": 39748.972, "end_s": 39758.868, "action": "Orbited and zoomed the scene, then switched to the Select tool and adjusted the view to frame the apartment building and nearby geometry.", "intent": "Reorient the model and prepare to select geometry.", "app": "SketchUp 2026", "details": "The apartment building became prominent again, and the Select tool was active by the end."}, {"start_s": 39758.868, "end_s": 39768.826, "action": "Clicked several times on scene geometry, opened a context menu showing options including Erase and Weld Edges, then dismissed it and continued selecting or adjusting geometry near the building.", "intent": "Inspect or modify selected model geometry.", "app": "SketchUp 2026", "details": "A long outlined rectangular piece of geometry was visible near the building."}, {"start_s": 39768.826, "end_s": 39777.881, "action": "Typed a shortcut, navigated the camera, and used the Move tool on the selected outlined geometry, dragging it so the long rectangular piece filled more of the view.", "intent": "Move the selected model element.", "app": "SketchUp 2026", "details": "The selected geometry remained highlighted in blue and the Move tool status was visible."}, {"start_s": 39777.881, "end_s": 39787.478, "action": "Navigated around the SketchUp building model with repeated scrolls and middle-mouse view adjustments, moving from a wider building view to a close-up of the balconies and facade.", "intent": "Inspect the building exterior from different viewpoints.", "app": "SketchUp 2026", "details": null}, {"start_s": 39787.478, "end_s": 39796.894, "action": "Continued orbiting and zooming around the building, alternating between an overall exterior view and close views of the side balconies and facade surfaces.", "intent": "Review exterior geometry and details from multiple angles.", "app": "SketchUp 2026", "details": null}, {"start_s": 39796.894, "end_s": 39807.118, "action": "Adjusted the camera around the building with scrolling and middle-mouse navigation, then selected a narrow horizontal facade element near a corner; brief typing occurred while the selected geometry remained visible.", "intent": "Inspect and select a facade component for possible editing.", "app": "SketchUp 2026", "details": "The selected narrow trim-like element is outlined in blue."}, {"start_s": 39807.118, "end_s": 39817.082, "action": "Zoomed and orbited around the selected facade element, changing from a corner view to a longer side view while keeping the geometry highlighted.", "intent": "Examine the selected facade element in context.", "app": "SketchUp 2026", "details": "The selected white trim remains outlined in blue."}, {"start_s": 39817.082, "end_s": 39826.642, "action": "Continued navigating around the selected trim with middle-mouse orbiting and scrolling, then clicked and dragged near its end to adjust or begin moving the geometry.", "intent": "Position or modify the selected facade trim element.", "app": "SketchUp 2026", "details": "The trim remains selected and the status bar indicates an active move operation."}, {"start_s": 39826.642, "end_s": 39836.501, "action": "Navigated away from the close-up with repeated scrolling and orbiting, briefly selecting near the model edge, and ended on a closer view of the building\u2019s balconies, doors, and wall fixtures.", "intent": "Inspect additional exterior building details after the trim operation.", "app": "SketchUp 2026", "details": null}, {"start_s": 39836.501, "end_s": 39847.78, "action": "Orbited around the SketchUp building model with repeated middle-button view adjustments, moving from a close upper-floor fa\u00e7ade toward the entrance and lower exterior.", "intent": "Inspect the building exterior from multiple angles.", "app": "SketchUp 2026", "details": "Materials tray remained open on the right."}, {"start_s": 39847.78, "end_s": 39857.165, "action": "Continued orbiting and zooming around the fa\u00e7ade, then selected a long horizontal exterior trim edge and activated the Move tool; the trim became highlighted blue.", "intent": "Select and prepare to reposition an exterior trim element.", "app": "SketchUp 2026", "details": "A single 'm' keystroke activated the Move tool."}, {"start_s": 39857.165, "end_s": 39867.217, "action": "Orbited and zoomed out around the building while keeping the horizontal trim selected, inspecting its placement across balconies and the front elevation.", "intent": "Review the selected trim element in the wider building context.", "app": "SketchUp 2026", "details": "The selected geometry remained highlighted blue."}, {"start_s": 39867.217, "end_s": 39877.169, "action": "Adjusted the camera around the upper fa\u00e7ade and selected the horizontal trim again, activating the Move tool and leaving the edge highlighted for manipulation.", "intent": "Continue positioning or copying the exterior trim element.", "app": "SketchUp 2026", "details": "The model view alternated between close and wider fa\u00e7ade views."}, {"start_s": 39877.169, "end_s": 39886.387, "action": "Zoomed and orbited along the side fa\u00e7ade while moving or copying the selected trim; the highlighted line extended across the building and the status bar indicated placement of copied items.", "intent": "Extend or duplicate the trim along the exterior fa\u00e7ade.", "app": "SketchUp 2026", "details": "The Move tool remained active with a visible distance readout."}, {"start_s": 39886.387, "end_s": 39895.982, "action": "Continued orbiting and zooming around the lower balcony and boundary wall, positioning the selected blue trim near an exterior edge; an 'On Edge in Group' inference tooltip appeared.", "intent": "Align the copied trim with an exterior edge.", "app": "SketchUp 2026", "details": "The selected geometry remained in Move placement mode."}, {"start_s": 39895.982, "end_s": 39906.245, "action": "Scrolled and manipulated the SketchUp camera around a close-up building model, then orbited and zoomed out to reveal the building facade and surrounding model elements.", "intent": "Inspect the 3D building model from different viewpoints.", "app": "SketchUp", "details": "Materials tray remained visible."}, {"start_s": 39906.245, "end_s": 39916.231, "action": "Orbited and zoomed the SketchUp view from the full scene into a closer view of the building facade and entrance area.", "intent": "Adjust the camera to inspect the building exterior.", "app": "SketchUp", "details": "Ended on a close facade view with balconies, doors, wall fixtures, and patterned paving."}, {"start_s": 39916.231, "end_s": 39925.544, "action": "Selected facade trim geometry, opened its context menu, and switched to the Paint Bucket tool with a yellow material selected.", "intent": "Prepare to apply a material to the selected building element.", "app": "SketchUp", "details": "Selected horizontal trim lines were highlighted in blue."}, {"start_s": 39925.544, "end_s": 39934.765, "action": "Navigated around the facade with the Paint Bucket tool and applied the selected yellow material to a horizontal trim band above the entrance paving.", "intent": "Change the appearance of the building trim.", "app": "SketchUp", "details": "The trim changed from white to yellow while the materials tray showed the selected material."}, {"start_s": 39934.765, "end_s": 39945.091, "action": "Zoomed and orbited back to review the building, entered text and performed additional clicks near the model and tray, then hid or resized the SketchUp window.", "intent": "Review the material change and adjust the workspace view.", "app": "SketchUp", "details": "The final visible view showed the building and adjacent structures from a wider angle."}, {"start_s": 39945.091, "end_s": 39962.116, "action": "Continued navigating the 3D scene, then opened the View menu and moved to the Toolbars command.", "intent": "Inspect SketchUp display or toolbar settings.", "app": "SketchUp", "details": "The View menu was open with Toolbars highlighted."}, {"start_s": 39962.116, "end_s": 39967.24, "action": "Switched among SketchUp windows and opened the Toolbars dialog over the modeled scene.", "intent": "Manage visible SketchUp toolbars.", "app": "SketchUp", "details": "The Toolbars dialog appeared with D5 Light listed and enabled."}, {"start_s": 39967.24, "end_s": 39972.081, "action": "Selected the D5 Light entry in the Toolbars dialog and waited without a visible configuration change.", "intent": "Review or adjust toolbar visibility.", "app": "SketchUp", "details": "The D5 Light row was highlighted while the dialog remained open."}, {"start_s": 39972.081, "end_s": 39978.24, "action": "Selected D5 LiveSync in the Toolbars dialog, enabling its toolbar and displaying the D5 LiveSync floating toolbar.", "intent": "Enable the D5 LiveSync toolbar.", "app": "SketchUp", "details": "D5 LiveSync became checked and its floating toolbar appeared at the upper left."}, {"start_s": 39978.24, "end_s": 39984.952, "action": "Selected the Curic Face Array and D5 Light entries while switching toolbar focus, then closed the Toolbars dialog and clicked the D5 LiveSync control.", "intent": "Manage plugin toolbars and initiate a LiveSync operation.", "app": "SketchUp", "details": "The model view remained visible with D5 Light and D5 LiveSync toolbars; the status bar reported that the operation could not be performed during data transfer."}, {"start_s": 39984.952, "end_s": 39990.807, "action": "Clicked the D5 LiveSync control again and waited while the data-transfer message remained visible, then brought up the D5 Render launcher.", "intent": "Start or continue synchronization with D5 Render.", "app": "SketchUp / D5 Render", "details": "SketchUp remained visible until the D5 Render launcher became active near the end of the span."}, {"start_s": 39990.807, "end_s": 40005.893, "action": "Waited for D5 Render to launch; the D5 RENDER splash screen appeared over the SketchUp model.", "intent": "Launch the D5 Render application.", "app": "D5 Render", "details": "The launcher was active and displayed the D5 RENDER loading splash."}, {"start_s": 40005.893, "end_s": 40016.624, "action": "Switched to D5 Render and waited while its launcher appeared over the SketchUp model; system configuration, network, power, input, and memory status changes occurred during the transition.", "intent": "Launch or resume D5 Render.", "app": "D5 Render", "details": "The D5 Render splash screen was visible over SketchUp, with a data-transfer warning in the underlying window."}, {"start_s": 40016.624, "end_s": 40025.517, "action": "Waited through repeated D5 Render and launcher window transitions, then opened a file picker showing Desktop folders filtered for .drs files. Clicked the picker\u2019s Close button without selecting a file.", "intent": "Browse for a D5 Render scene or close the file picker.", "app": "D5 Render", "details": "The picker displayed folders including Asian Paints Chromatics, Asian Paints Colours of India, Asian Paints Whites, and elevation 111_d5c."}, {"start_s": 40025.517, "end_s": 40034.317, "action": "Returned to SketchUp, dismissed or passed through the D5 LiveSync warning window, opened the File menu, and moved to the Save a Copy As command.", "intent": "Access SketchUp file-saving options while handling the LiveSync warning.", "app": "SketchUp", "details": "The SketchUp model remained visible and the File menu highlighted Save a Copy As."}, {"start_s": 40034.317, "end_s": 40038.814, "action": "Clicked the Save a Copy As menu item and returned to the SketchUp model view with the D5 LiveSync toolbar visible.", "intent": "Attempt to save a copy of the active SketchUp model.", "app": "SketchUp", "details": "No save dialog or completed save was visible; the status bar continued to show a data-transfer warning."}, {"start_s": 40038.814, "end_s": 40051.456, "action": "Waited while D5 Render launcher activity resumed and the D5 Render splash screen appeared over the unchanged SketchUp model.", "intent": "Wait for D5 Render to launch or complete initialization.", "app": "D5 Render", "details": "The D5 RENDER splash screen remained visible; memory pressure was reported near the end of the span."}, {"start_s": 40051.456, "end_s": 40059.412, "action": "Continued waiting with the D5 Render splash screen over SketchUp, then clicked near the lower-right taskbar area twice.", "intent": "Wait for D5 Render initialization and interact with the desktop taskbar.", "app": "D5 Render", "details": "No visible change followed the taskbar clicks."}, {"start_s": 40059.412, "end_s": 40079.412, "action": "Switched to the recorder and attempted an interaction while SketchUp remained visible; the application reported that the operation could not be performed during data transfer.", "intent": "Monitor or interact with the recorder and SketchUp while synchronization was in progress.", "app": "Screen recorder", "details": "SketchUp showed a multi-building model with D5 LiveSync and D5 Light toolbars."}, {"start_s": 40079.412, "end_s": 40092.628, "action": "Waited on the recorder's account screen, then clicked the taskbar area to switch applications.", "intent": "Leave the recorder's account view and access another desktop application.", "app": "Screen recorder", "details": "The recorder's account page displayed device and seat information and a Go to tasks button."}, {"start_s": 40092.628, "end_s": 40098.462, "action": "Switched through Windows Explorer and Microsoft Edge, reviewed the 3D Warehouse lighting model page and other browser tabs, then hid the browser windows.", "intent": "Review available lighting model and reference pages.", "app": "Microsoft Edge", "details": "Edge displayed a 3D Warehouse page for a model titled \u201clighting,\u201d with Download and View in AR controls."}, {"start_s": 40098.462, "end_s": 40105.046, "action": "Returned to the desktop and repeatedly switched between Windows Explorer and the unresponsive D5 LiveSync window.", "intent": "Attempt to access or recover the D5 LiveSync application.", "app": "D5 LiveSync", "details": "The D5 LiveSync window remained marked Not Responding."}, {"start_s": 40105.046, "end_s": 40114.643, "action": "Switched back to SketchUp, opened the print workflow, scrolled the preview, and clicked within the print preview controls.", "intent": "Prepare the SketchUp model for PDF output and inspect the print preview.", "app": "SketchUp", "details": "A SketchUp print dialog targeted Adobe PDF, followed by a preview showing the building model on page 1."}, {"start_s": 40114.643, "end_s": 40132.631, "action": "Opened the Save PDF File As dialog, edited the filename to \u201cg+3 sketchup elevation,\u201d and left the save dialog open.", "intent": "Name and save the SketchUp print output as a PDF.", "app": "SketchUp", "details": "The dialog was on the Desktop with file type PDF files (*.PDF); the Save button was visible but not confirmed."}, {"start_s": 40132.631, "end_s": 40143.2, "action": "Switched among Acrobat PDF creation, SketchUp, and Microsoft Edge, then returned to SketchUp. Opened and closed the File menu, clicked within the SketchUp workspace, and switched to the recorder window from the taskbar.", "intent": "Review the SketchUp model and navigate between related applications or windows.", "app": "SketchUp 2026", "details": "An Adobe PDF creation notification indicated that a PDF had been created from the SketchUp elevation file."}], "summary": "Developed and refined a multi-story architectural SketchUp model, including walls, stairs, doors, windows, balconies, rooftop structures, railings, and facade details. Applied tile, wood, marble, glass, and custom image materials; configured plugins and imported components, explored references and extensions, synchronized toward D5 Render, and generated a PDF preview of the elevation."}