{
  "schema_version": "1.0",
  "rubrics": [
    {
      "id": "R1",
      "requirement": "The model shall measure approximately 12153.7 mm in overall width across the front elevation."
    },
    {
      "id": "R2",
      "requirement": "The model shall measure approximately 26086.5 mm in overall height from ground to the highest roof."
    },
    {
      "id": "R3",
      "requirement": "The model shall measure approximately 14181.2 mm in overall plan depth."
    },
    {
      "id": "R4",
      "requirement": "The model shall consist of a front volume and a rear volume, with the rear volume's roof rising above the front volume's roof."
    },
    {
      "id": "R5",
      "requirement": "The model shall include a ground-floor retail base with framed, mullioned storefront glazing on the front and right side elevations."
    },
    {
      "id": "R6",
      "requirement": "The model shall include a door opening at ground level on the right side elevation."
    },
    {
      "id": "R7",
      "requirement": "The model shall include twelve residential storeys above the retail base, with floor-slab edges expressed at each level."
    },
    {
      "id": "R8",
      "requirement": "The model shall include a punched-window bay on the left portion of the front elevation, with a window grid repeated on each upper level."
    },
    {
      "id": "R9",
      "requirement": "The model shall include stacked projecting balconies with railings and glazed balustrade panels on the right portion of the front elevation, wrapping onto the right side."
    },
    {
      "id": "R10",
      "requirement": "The model shall include a vertical stack of twelve balconies with railings and multi-panel glazed openings on the rear volume's side elevation."
    },
    {
      "id": "R11",
      "requirement": "The model shall be built as three-dimensional geometry with recessed openings and projecting balconies rather than flat line work."
    },
    {
      "id": "R12",
      "requirement": "The model shall use millimetres as its unit system."
    },
    {
      "id": "R13",
      "requirement": "The model shall use reusable component definitions with multiple instances for repeated elements such as windows, glazing panels and balcony railings."
    },
    {
      "id": "R14",
      "requirement": "The model shall apply distinct materials that differentiate glazing from frames, walls and railings."
    }
  ]
}