{
  "schema_version": "1.0",
  "rubrics": [
    {
      "id": "R1",
      "requirement": "The model shall contain structural framing beams 9\" wide in depths of 18\", 24\" and 30\"."
    },
    {
      "id": "R2",
      "requirement": "The model shall include a 9\"x24\" beam marked B1 along the north edge of the framing."
    },
    {
      "id": "R3",
      "requirement": "The model shall include 9\"x30\" beams along the east edge marked B11/BR11 and along the south edge marked B5 and BR5."
    },
    {
      "id": "R4",
      "requirement": "The model shall include a beam marked B4 running east-west, 9\"x24\" in its western portion and 9\"x18\" in its eastern portion."
    },
    {
      "id": "R5",
      "requirement": "The model shall include 9\"x18\" beams marked B2, B3, B7, B8, B9, B10 and BR10."
    },
    {
      "id": "R6",
      "requirement": "The model shall include a beam line marked B6 along the west edge, 9\"x24\" in the north bay and 9\"x18\" in the remaining bays."
    },
    {
      "id": "R7",
      "requirement": "The model shall include columns at the beam intersections shown on the plan."
    },
    {
      "id": "R8",
      "requirement": "The model shall include a roof slab with an opening at the staircase bay of approximately 12'-8\" by 10'-5\"."
    },
    {
      "id": "R9",
      "requirement": "The model shall represent two sunken slab areas depressed 12\", in the 4'-7\" bay and in the 5'-6\" bay."
    },
    {
      "id": "R10",
      "requirement": "The model shall include slab projections along the south edge of 5\" (over 18'-6\") and 12\" (over 16'-4\", returning 15'-1\" up the east side)."
    },
    {
      "id": "R11",
      "requirement": "The model shall set out the bays with clear dimensions including 13'-2\", 4'-7\", 12'-8\", 18', 10'-4\", 14'-7\" and 18'-3\"."
    },
    {
      "id": "R12",
      "requirement": "The drawing shall tag beams with their marks and sizes, such as B5(9\"X30\")."
    },
    {
      "id": "R13",
      "requirement": "The drawing shall dimension the bay spans in the framing plan view."
    },
    {
      "id": "R14",
      "requirement": "The model shall be in imperial units, with a level for the ground floor roof."
    },
    {
      "id": "R15",
      "requirement": "The drawing shall show North, South, East and West elevation markers on the plan."
    }
  ]
}