{"annotations":[{"start_s":0.0,"end_s":20.0,"action":"Waited on the Autodesk Revit Home screen while recent project tiles loaded; system network, power, input, and memory status changed.","intent":"Remain at the Revit start page while the application initializes.","app":"Autodesk Revit","details":"No project interaction was visible."},{"start_s":20.0,"end_s":25.924,"action":"Opened the New Project workflow from Revit Home and confirmed with Enter.","intent":"Create a new Revit project.","app":"Autodesk Revit","details":"A New Project window appeared over the Home screen."},{"start_s":25.924,"end_s":33.978,"action":"Waited while Revit opened and initialized the new project.","intent":"Allow the new project to load.","app":"Autodesk Revit","details":"The Revit workspace remained mostly blank during initialization."},{"start_s":33.978,"end_s":41.557,"action":"Loaded Project1 and displayed the Level 0 floor plan; resized the workspace and clicked within the drawing area.","intent":"Prepare the new floor plan for editing.","app":"Autodesk Revit","details":"The title changed to Project1 - Floor Plan: Level 0, and the plan view became visible."},{"start_s":41.557,"end_s":56.177,"action":"Opened the Link Image file picker, selected an image from Downloads, and returned to the Level 0 plan with the raster floor-plan image displayed; zoomed or scrolled the view and typed v.","intent":"Insert and inspect a reference floor-plan image.","app":"Autodesk Revit","details":"The linked image shows a furnished plan with rooms, a lobby, stairs, and corridors."},{"start_s":56.177,"end_s":63.959,"action":"Opened Visibility/Graphic Overrides for Floor Plan: Level 0, navigated the category list, selected visibility rows, scrolled through categories, and clicked OK.","intent":"Adjust visibility and graphic overrides for the floor plan.","app":"Autodesk Revit","details":"The dialog displayed annotation and imported-category visibility controls over the raster image."},{"start_s":63.959,"end_s":82.231,"action":"Navigated and zoomed around the Level 0 floor plan, then exited transient commands and opened the Project Units dialog.","intent":"Access project unit formatting settings.","app":"Autodesk Revit","details":"The view moved from a selected raster image to a closer floor-plan view; Project Units was opened at the end."},{"start_s":82.231,"end_s":88.673,"action":"Opened the Feet format settings in Project Units and changed the rounding selection from 0 decimal places to 1 decimal place.","intent":"Adjust the displayed precision for feet-based units.","app":"Autodesk Revit","details":"The Format dialog showed Units set to Feet and Rounding set to 1 decimal place."},{"start_s":88.673,"end_s":95.939,"action":"Opened the Rounding dropdown in the Feet format dialog, reviewed the available precision options, and left the setting at 1 decimal place.","intent":"Review and select the desired unit rounding precision.","app":"Autodesk Revit","details":"The dropdown visibly listed rounding choices including 0 through 3 decimal places."},{"start_s":95.939,"end_s":105.525,"action":"Confirmed the unit-format dialogs and returned to the Level 0 floor plan, then selected the horizontal dimension annotation across the balcony area.","intent":"Apply the unit-format change and inspect the floor-plan dimension.","app":"Autodesk Revit","details":"The selected dimension displayed temporary editing controls over the balcony."},{"start_s":105.525,"end_s":116.778,"action":"Zoomed out and selected the balcony detail group, then returned selection to the raster image in the closer floor-plan view.","intent":"Inspect or manipulate overlapping floor-plan content near the balcony.","app":"Autodesk Revit","details":"The wider view showed the selected Detail Group: Array Group 1 before the raster image was selected again."},{"start_s":116.778,"end_s":127.418,"action":"Started the Scale command on the floor-plan content, selected a base point and a second point, and entered a scale value of 5' 6\" before continuing the command.","intent":"Scale the selected floor-plan content using a specified reference distance.","app":"Autodesk Revit","details":"The Scale tool was active and temporary dimensions appeared over the balcony."},{"start_s":127.418,"end_s":136.7,"action":"Clicked and scrolled within the Level 0 floor plan, then resized the Revit window and zoomed into the bedroom area.","intent":"Inspect the raster floor-plan image at a closer scale.","app":"Autodesk Revit","details":"The view changed from a full apartment plan to a close-up of Bed Room-1 and adjacent Toilet-1/Pooja areas."},{"start_s":136.7,"end_s":146.142,"action":"Selected a horizontal reference in the bedroom and adjusted the view around Bed Room-1; pressed Escape and resized the window while keeping the scale tool active.","intent":"Position or prepare a scale measurement in the floor plan.","app":"Autodesk Revit","details":"A temporary horizontal measurement/reference line appeared across Bed Room-1, then the view returned to the bedroom close-up."},{"start_s":146.142,"end_s":156.979,"action":"Selected points and scrolled while working with the active scale tool, then entered dimension text beginning with 1 and continuing with 2'.","intent":"Specify a scale or measured length for the raster floor plan.","app":"Autodesk Revit","details":"The view became highly zoomed into the Bed Room-1 label and adjacent wall while a temporary scale line remained visible."},{"start_s":156.979,"end_s":165.496,"action":"Edited the scale-length field by typing x and 12, deleting the entries, and pressing Enter; then scrolled the raster image view.","intent":"Complete or correct the scale-length input.","app":"Autodesk Revit","details":"The input field visibly showed 12'x before deletion; afterward Revit returned to the raster-image context and the view was zoomed in."},{"start_s":165.496,"end_s":175.728,"action":"Scrolled repeatedly to zoom out and reposition the raster image from the bedroom close-up to a broad view of the Level 0 apartment floor plan.","intent":"Review the overall raster floor plan after scale adjustments.","app":"Autodesk Revit","details":"The view progressed from a close-up to nearly the full plan, with room labels and the schedule area visible."},{"start_s":175.728,"end_s":184.883,"action":"Resized the Revit window, zoomed and panned through the upper-left apartment area, and clicked around Bed Room-1, M.Toilet, Pooja, and Dining.","intent":"Inspect room locations and dimensions in the floor-plan image.","app":"Autodesk Revit","details":"The final view focused on the bedroom, M.Toilet, Pooja, and Dining areas while the scale tool remained active."},{"start_s":184.883,"end_s":193.186,"action":"Clicked and scrolled within the Level 0 floor plan, entered a scale value of 12, and confirmed it; the view zoomed out while remaining in Modify | Scale mode.","intent":"Adjust the scale of the selected raster image or floor-plan reference.","app":"Autodesk Revit","details":"The floor plan shows bedrooms, dining, living, and kitchen areas; the scale command prompts for another length after confirmation."},{"start_s":193.186,"end_s":203.124,"action":"Clicked the scale command area, scrolled the floor plan, and used middle-button navigation to zoom and reposition from the full layout toward the master bedroom, living room, kitchen, and balcony.","intent":"Navigate the floor plan to position the view for further scaling work.","app":"Autodesk Revit","details":"The view ends focused on the lower portion of the Level 0 plan."},{"start_s":203.124,"end_s":214.954,"action":"Clicked and scrolled around the master bedroom and living-room area, then entered 12 and confirmed; Revit displayed a diagonal cyan raster-image boundary or guide across the plan.","intent":"Continue scaling or positioning the selected raster image against the floor plan.","app":"Autodesk Revit","details":"The selected image remains active in Modify | Scale mode."},{"start_s":214.954,"end_s":224.75,"action":"Clicked near the master bedroom, scrolled, and entered a horizontal measurement of 9.500 feet; after pressing Escape, the raster image became selected and the view zoomed out to show more of the plan.","intent":"Set or inspect a scale measurement for the selected raster image.","app":"Autodesk Revit","details":"The master bedroom measurement is visibly labeled 9.500' before the command is exited."},{"start_s":224.75,"end_s":235.634,"action":"Clicked and scrolled across the lower floor plan, navigating from the kitchen and utility area toward the balcony and living room; middle-button panning repositioned the view around the kitchen.","intent":"Inspect and position the floor-plan image for continued editing.","app":"Autodesk Revit","details":"The view ends centered on the kitchen, utility, living-room edge, and balcony."},{"start_s":235.634,"end_s":245.616,"action":"Scrolled and panned around the kitchen and utility area, then clicked and dragged near the utility-room dimensions; resized the Revit window and continued scrolling, leaving the selected image in Modify | Scale mode with temporary dimension graphics visible.","intent":"Refine the raster image scale or alignment against the utility-room geometry.","app":"Autodesk Revit","details":"The final view is zoomed into the utility area with visible temporary measurement and arc graphics."},{"start_s":245.616,"end_s":255.282,"action":"Adjusted the active scale operation in the Level 0 floor plan by clicking and scrolling around the kitchen and utility area, then entered 5 and confirmed it.","intent":"Set or refine the scale value for the selected plan element.","app":"Autodesk Revit","details":"The view remained focused on the kitchen and utility room raster plan."},{"start_s":255.282,"end_s":264.406,"action":"Selected the raster image, adjusted the scale operation with clicks around the utility area, and repositioned the view while the scale command remained active.","intent":"Continue calibrating the raster image scale against the floor plan.","app":"Autodesk Revit","details":"The raster image properties were visible before returning to the Scale tool."},{"start_s":264.406,"end_s":273.265,"action":"Selected a point near the utility area, entered 5 and confirmed it, then zoomed out to review the broader Level 0 floor plan.","intent":"Apply another scale adjustment and inspect the resulting plan extent.","app":"Autodesk Revit","details":"The view changed from a close kitchen/utility view to a wider plan showing bedrooms, dining, living, and drawing areas."},{"start_s":273.265,"end_s":283.05,"action":"Navigated the floor plan with middle-button panning and repeated scrolling, moving from the wider plan view toward the master bedroom, living room, kitchen, and balcony area.","intent":"Inspect and reposition the plan while continuing the scale workflow.","app":"Autodesk Revit","details":"The raster floor-plan image remained selected and the view shifted across the residential layout."},{"start_s":283.05,"end_s":293.2,"action":"Clicked near the master bedroom wall and used the Scale tool to work on a horizontal measurement, zooming into the bed and adjacent wall; pressed Escape and continued selecting points near the same area.","intent":"Refine or check the raster image scale using a horizontal reference near the master bedroom.","app":"Autodesk Revit","details":"The view ended tightly zoomed on the master bedroom bed, wall, and window area."},{"start_s":293.2,"end_s":303.661,"action":"Zoomed and panned further around the master bedroom wall and window, clicked a reference point, then pressed Escape while continuing to navigate the close-up plan view.","intent":"Inspect the scale reference and exit the active adjustment as needed.","app":"Autodesk Revit","details":"The final view was a highly magnified close-up of the wall and bed area with scale annotations visible."},{"start_s":303.661,"end_s":313.398,"action":"Adjusted the Revit view while the Scale tool remained active, scrolling and repositioning the floor plan from a close bedroom view to the lobby and drawing-room area.","intent":"Navigate the floor plan to inspect or position the scaled raster image.","app":"Autodesk Revit","details":null},{"start_s":313.398,"end_s":322.816,"action":"Selected the raster image and navigated across the floor plan, briefly displaying a 4.667-foot measurement in the drawing room before moving to the master-bedroom area.","intent":"Inspect the raster image and its scale or placement within the plan.","app":"Autodesk Revit","details":"Raster Images context became active after selection."},{"start_s":322.816,"end_s":332.738,"action":"Entered a numeric value and confirmed it, then zoomed and panned across the raster image from a close bedroom detail to a wider master-bedroom view.","intent":"Apply or test a scale value for the raster image and inspect the result.","app":"Autodesk Revit","details":"The visible raster image remained selected while the Scale tool was active."},{"start_s":332.738,"end_s":342.734,"action":"Exited the transient input state, zoomed and panned around the master bedroom, and repositioned the view to show the master bedroom, living room, and balcony.","intent":"Review the scaled image placement across adjacent rooms.","app":"Autodesk Revit","details":null},{"start_s":342.734,"end_s":352.876,"action":"Zoomed into the master-bedroom floor plan and used middle-button navigation to reposition around the lower wall and window area, ending on a close wall detail.","intent":"Inspect alignment and placement of the raster image near the bedroom boundary.","app":"Autodesk Revit","details":null},{"start_s":352.876,"end_s":362.365,"action":"Entered and confirmed another numeric value, navigated around the selected raster image, then zoomed from the master-bedroom and living-room overview into a close master-bedroom view.","intent":"Adjust or verify the raster image scale and inspect the resulting plan detail.","app":"Autodesk Revit","details":"Raster Images context and the Scale tool remained visible."},{"start_s":362.365,"end_s":379.165,"action":"Exited the scale operation, navigated the Level 0 floor plan, and activated the Place Wall tool with the selected Basic Wall type.","intent":"Prepare to place a wall in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":379.165,"end_s":388.618,"action":"Opened Type Properties for the Basic Wall, chose Rename, and entered the new type name “WALL 1” in the Name dialog.","intent":"Create a distinct wall type before editing its construction.","app":"Autodesk Revit","details":"The rename dialog remains open at the end of the span."},{"start_s":388.618,"end_s":395.998,"action":"Confirmed the wall type rename, opened Edit Assembly, changed the brick layer thickness to 0.7 feet, and returned to Type Properties showing WALL 1 with width 0.700.","intent":"Set the wall assembly thickness for the renamed wall type.","app":"Autodesk Revit","details":null},{"start_s":395.998,"end_s":406.299,"action":"Closed the type-editing dialogs, returned to the Level 0 plan, and switched to the East elevation view.","intent":"Return to the model and inspect the elevation.","app":"Autodesk Revit","details":"The East elevation displays Level 0 and Level 1 datum lines."},{"start_s":406.299,"end_s":416.115,"action":"Selected the Level 0 datum, edited its name through the inline label, and changed the displayed level name to “GG”; the elevation shows GG at 0.0 feet and FFL at 13.1 feet.","intent":"Rename the lower elevation level datum.","app":"Autodesk Revit","details":null},{"start_s":416.115,"end_s":426.437,"action":"Zoomed and panned the East elevation, selected the level datum, and activated Place Level, leaving the tool ready to specify a new level start point.","intent":"Prepare to add another level in the elevation.","app":"Autodesk Revit","details":"The view shows FFL and GG datum lines with Place Level active."},{"start_s":426.437,"end_s":434.491,"action":"Adjusted the Revit level-placement view, clicked the elevation area, and entered 300 followed by MM into the active level command.","intent":"Set or adjust a level elevation value.","app":"Autodesk Revit","details":"Elevation view showed FFL at 13.1 feet and GG at 0.0 feet."},{"start_s":434.491,"end_s":443.435,"action":"Entered 0 and confirmed the value, then pressed Escape repeatedly and scrolled while remaining in the level-placement view.","intent":"Finalize or cancel the current level input and review the elevation view.","app":"Autodesk Revit","details":"The view remained on the East elevation with FFL and GG visible."},{"start_s":443.435,"end_s":453.931,"action":"Exited the active command, selected the FFL level, and entered 3000MM; the displayed FFL elevation changed to 9.8 feet.","intent":"Modify the FFL level elevation.","app":"Autodesk Revit","details":"The FFL datum was selected and displayed at 9.8 feet after editing."},{"start_s":453.931,"end_s":463.851,"action":"Scrolled and adjusted the elevation view, entered LL, and dragged across the level area while the level-placement tool remained active.","intent":"Navigate the elevation view and prepare another level placement or edit.","app":"Autodesk Revit","details":"The view zoomed far out, leaving the FFL and GG datums small and centered."},{"start_s":463.851,"end_s":472.323,"action":"Entered and confirmed 3000MM, then selected the level region; Revit displayed a new HH level at 19.7 feet above FFL.","intent":"Create or position a new level above FFL.","app":"Autodesk Revit","details":"HH was shown at 19.7 feet, with FFL at 9.8 feet; the level name field was active."},{"start_s":472.323,"end_s":481.904,"action":"Entered RL, confirmed the level label, and exited the elevation interaction; then switched to the GG floor plan and activated Place Wall.","intent":"Create or edit the RL level, then begin drawing walls in the GG plan.","app":"Autodesk Revit","details":"The East elevation showed RL at 19.7 feet and FFL at 9.8 feet before the GG floor plan opened with the wall tool active."},{"start_s":481.904,"end_s":491.044,"action":"Switched from the GG floor plan to the East elevation, then navigated the elevation view with clicks and scrolling.","intent":"Inspect the East elevation and related level datums.","app":"Autodesk Revit","details":"The East elevation displayed RL, FFL, and GG level lines."},{"start_s":491.044,"end_s":503.769,"action":"Entered GL to open the GL floor plan, exited level-editing states, and scrolled to reposition the plan view.","intent":"Open and inspect the GL floor plan.","app":"Autodesk Revit","details":"The GL plan displayed the master bedroom area."},{"start_s":503.769,"end_s":523.769,"action":"Activated wall placement and repositioned the zoomed GL plan around the master bedroom with middle-click navigation.","intent":"Prepare to place or inspect a wall in the GL plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active with the base constraint set to GL."},{"start_s":523.769,"end_s":529.486,"action":"Scrolled slightly while remaining in wall-placement mode over the master bedroom area.","intent":"Adjust the view before continuing wall placement.","app":"Autodesk Revit","details":"No wall segment was visibly completed during this interval."},{"start_s":529.486,"end_s":548.865,"action":"Panned the zoomed GL plan with middle-click navigation while keeping wall placement active.","intent":"Position the view for precise wall placement near the bedroom edge.","app":"Autodesk Revit","details":"The view remained tightly focused on the master bedroom boundary."},{"start_s":548.865,"end_s":558.706,"action":"Scrolled and zoomed further into the bedroom boundary, clicked near the wall, and adjusted the wall-placement orientation and finish-face setting.","intent":"Precisely position and configure the wall placement.","app":"Autodesk Revit","details":"The wall tool remained active; the final visible setting was Location Line: Finish Face: Exterior."},{"start_s":558.706,"end_s":568.251,"action":"Navigated the Revit floor plan by panning and zooming around the wall and adjacent room area while remaining in Place Wall mode.","intent":"Inspect and position the view for wall placement.","app":"Autodesk Revit","details":null},{"start_s":568.251,"end_s":578.991,"action":"Panned and zoomed through the floor plan from the master bedroom toward the toilet area, keeping the wall placement tool active.","intent":"Navigate to another location for wall placement.","app":"Autodesk Revit","details":null},{"start_s":578.991,"end_s":589.262,"action":"Zoomed out to review a larger portion of the 3BHK floor plan, briefly canceled the active command with Escape, and then continued navigating near the bedrooms and toilets.","intent":"Review the overall plan and reposition the view.","app":"Autodesk Revit","details":null},{"start_s":589.262,"end_s":599.797,"action":"Zoomed and panned around the wall and toilet boundary, clicked within the plan, and continued the wall-placement interaction before pressing Escape.","intent":"Inspect or adjust wall placement near the room boundary.","app":"Autodesk Revit","details":null},{"start_s":599.797,"end_s":609.364,"action":"Repeatedly canceled and resumed the Revit interaction while moving and resizing the window; selected a wall segment, leaving it highlighted for modification.","intent":"Select and prepare a wall element for editing.","app":"Autodesk Revit","details":"A Windows Security notification appeared near the end of the span."},{"start_s":609.364,"end_s":619.709,"action":"Dismissed the Windows Security notification, returned to Revit, navigated across the floor plan, and left the selected wall highlighted while viewing the master bedroom and adjacent bathroom area.","intent":"Continue reviewing the selected wall and surrounding plan geometry.","app":"Autodesk Revit","details":"The view was panned and zoomed; several Escape presses canceled transient commands."},{"start_s":619.709,"end_s":629.733,"action":"Adjusted the Revit floor-plan view with middle-button navigation and scrolling, then clicked to place or continue a Basic Wall segment near the living-room and balcony area; the wall-placement command remained active.","intent":"Continue placing a wall along the floor plan.","app":"Autodesk Revit","details":"The view shifted from a close-up wall area to the living-room and balcony junction."},{"start_s":629.733,"end_s":639.105,"action":"Navigated and zoomed the floor plan with middle-button clicks and scrolling, then clicked near the balcony-side wall endpoint to continue the active wall layout.","intent":"Position the view and extend the wall layout.","app":"Autodesk Revit","details":"The plan moved between a wider bedroom/living-room view and a closer balcony-side view."},{"start_s":639.105,"end_s":648.821,"action":"Clicked near the living-room window area and navigated the plan, then clicked near the lower wall edge while continuing the active wall-placement operation.","intent":"Continue positioning and drawing the wall around the living-room boundary.","app":"Autodesk Revit","details":"The view shifted across the living room, window, and adjacent kitchen area."},{"start_s":648.821,"end_s":658.473,"action":"Selected a wall segment near the living-room window, zoomed and navigated around it, then returned to a wider floor-plan view showing the bedroom, living room, kitchen, utility, and balcony.","intent":"Inspect and adjust the wall segment in context.","app":"Autodesk Revit","details":"The selected wall displayed temporary dimensions before the view was zoomed back out."},{"start_s":658.473,"end_s":668.326,"action":"Navigated the floor plan with a middle-button click and typed W and A, then continued the active wall-placement workflow while moving toward the balcony edge.","intent":"Use Revit wall-navigation shortcuts and continue wall placement.","app":"Autodesk Revit","details":"The view changed from the overall apartment plan to a close-up of the balcony and adjacent exterior boundary."},{"start_s":668.326,"end_s":680.587,"action":"Navigated and zoomed into the kitchen and balcony junction, clicked to position the wall endpoint, and continued wall placement; the span ended with the wall command still active near the balcony corner.","intent":"Place or align the wall at the kitchen-balcony junction.","app":"Autodesk Revit","details":"Temporary dimensions and the wall preview were visible around the sink-side wall and balcony corner."},{"start_s":680.587,"end_s":690.644,"action":"Exited transient commands, adjusted the Revit view with clicks and scrolling, and zoomed from a close-up wall area to a broader floor-plan view.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":null},{"start_s":690.644,"end_s":700.261,"action":"Scrolled and entered wall placement, then clicked and positioned a Basic Wall segment along the upper edge of the plan while zooming into the wall area.","intent":"Place a new wall segment in the floor plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active in Place Wall mode."},{"start_s":700.261,"end_s":709.359,"action":"Canceled the active wall operation, dragged and clicked around the plan, and zoomed into the wall beside the bedroom and toilet area.","intent":"Inspect or adjust the wall placement near the rooms.","app":"Autodesk Revit","details":"A wall segment was selected in the close-up view."},{"start_s":709.359,"end_s":719.451,"action":"Re-entered wall placement, navigated by scrolling across the floor plan, and positioned the view over the bedrooms, toilets, and shaft area.","intent":"Continue positioning a wall in the floor plan.","app":"Autodesk Revit","details":"Place Wall mode remained active with Basic Wall WALL 1."},{"start_s":719.451,"end_s":729.415,"action":"Clicked and scrolled through the plan, then canceled the active command and selected a long horizontal wall spanning above the toilet rooms.","intent":"Inspect and select the wall element near the toilet and shaft area.","app":"Autodesk Revit","details":"The selected wall displayed as a cyan-highlighted horizontal segment."},{"start_s":729.415,"end_s":738.687,"action":"Dragged and clicked the selected wall, then activated the Scale tool and began specifying a drag point near the toilet-room wall.","intent":"Scale or modify the selected wall geometry.","app":"Autodesk Revit","details":"The final view showed Modify | Scale active with temporary dimensions near the toilet room."},{"start_s":738.687,"end_s":748.271,"action":"Exited the current tool, navigated and zoomed around the GL floor plan, then activated Place Wall and positioned the view near Bedroom 1 and the adjacent toilet.","intent":"Prepare to place or edit a wall in the floor plan.","app":"Autodesk Revit","details":"The view ended zoomed in with Basic Wall WALL 1 active and the wall-placement cursor near the Bedroom 1/toilet partition."},{"start_s":748.271,"end_s":758.686,"action":"Navigated around the zoomed floor plan with middle-click panning and selected wall-placement points near the Bedroom 1 and toilet junction, then canceled or reset the active operation.","intent":"Position and begin defining a wall segment near the bedroom-toilet boundary.","app":"Autodesk Revit","details":"The view showed a highlighted point and a temporary wall-placement state around the partition."},{"start_s":758.686,"end_s":768.729,"action":"Selected a wall near the bedroom and toilet, inspected it while zooming and panning across the plan, then moved the view toward the master toilet and dressing area.","intent":"Inspect the wall layout and reposition for continued wall work.","app":"Autodesk Revit","details":"A Basic Wall WALL 1 was selected initially; the final view centered on the M. Toilet and Dress rooms."},{"start_s":768.729,"end_s":778.729,"action":"Continued panning and zooming through the floor plan while placing or positioning a wall, moving from the toilet area toward adjacent rooms and a doorway.","intent":"Continue laying out or adjusting wall geometry in the plan.","app":"Autodesk Revit","details":"Place Wall remained active with Basic Wall WALL 1, and temporary placement guides were visible near the doorway."},{"start_s":778.729,"end_s":789.273,"action":"Navigated across the plan, selected and reviewed wall geometry near the living and utility areas, and zoomed out to reveal the utility room, shafts, and surrounding spaces.","intent":"Inspect and continue positioning wall elements across the floor plan.","app":"Autodesk Revit","details":"The final view showed the upper utility and toilet areas with multiple shafts and corridor boundaries."},{"start_s":789.273,"end_s":799.217,"action":"Selected a wall and dragged its endpoint while panning and zooming, then zoomed out to review the adjusted wall in the broader floor plan.","intent":"Adjust the length or endpoint of a wall and verify its placement.","app":"Autodesk Revit","details":"The selected wall remained highlighted near the utility/corridor edge; the final view showed the wider 3BHK plan and surrounding service rooms."},{"start_s":799.217,"end_s":809.247,"action":"Exited wall editing, navigated the floor plan with middle-mouse dragging and scrolling, and repositioned the view from a close apartment plan to a broader multi-unit layout.","intent":"Navigate and inspect the Revit floor plan.","app":"Autodesk Revit","details":"The GL floor plan remained open; the selected wall state was cleared."},{"start_s":809.247,"end_s":816.661,"action":"Zoomed and panned across the GL floor plan, moving from the broader layout into a close view of the bedrooms, dining, drawing, and lobby areas.","intent":"Inspect room layout details in the floor plan.","app":"Autodesk Revit","details":"Visible room labels included BED ROOM-1, BED ROOM-2, DINING, DRAWING, POOJA, and LOBBY."},{"start_s":816.661,"end_s":836.661,"action":"Paused with the GL floor plan displayed in a stable view.","intent":"Review the displayed floor plan.","app":"Autodesk Revit","details":null},{"start_s":836.661,"end_s":849.731,"action":"Returned focus to Revit and zoomed out through the floor plan, revealing multiple apartment units and the first-floor schedule/table.","intent":"Review the overall first-floor arrangement.","app":"Autodesk Revit","details":"System power-source changes occurred during the interval; no design edit was visible."},{"start_s":849.731,"end_s":869.731,"action":"Adjusted the view with middle-mouse clicks, leaving a zoomed-out overview of several apartment units and the floor schedule.","intent":"Inspect the overall plan composition.","app":"Autodesk Revit","details":"The overview showed repeated apartment layouts around a central circulation area."},{"start_s":869.731,"end_s":879.695,"action":"Zoomed and panned into the dining, drawing, living, kitchen, lobby, and utility areas, then selected a wall or room-separation element near the drawing/lobby boundary.","intent":"Inspect and select a specific plan element near the apartment boundary.","app":"Autodesk Revit","details":"The final view showed Modify | Walls with a Room Separation selection in the Properties panel."},{"start_s":879.695,"end_s":889.71,"action":"Dragged and scrolled around the GL floor plan, clicking near the selected wall and navigating the view; then pressed Escape and hid the Revit window.","intent":"Navigate and inspect the floor plan around the kitchen and living areas.","app":"Autodesk Revit","details":"Selected Basic Wall WALL 1 is visible in the GL floor plan."},{"start_s":889.71,"end_s":906.222,"action":"Resized and repositioned the Revit window while zooming or scrolling the floor plan; selected a raster image and then returned to wall placement mode.","intent":"Adjust the working view and prepare a wall type for placement.","app":"Autodesk Revit","details":"The raster image is selected briefly, and the final view shows Modify | Place Wall."},{"start_s":906.222,"end_s":915.673,"action":"Opened wall type properties, renamed or selected the type as W2, opened Edit Assembly, entered 0.55 for the wall layer thickness, and confirmed the dialogs.","intent":"Create or modify wall type W2 with a 0.55 thickness.","app":"Autodesk Revit","details":"The Edit Assembly dialog shows Basic Wall type W2 with Brick, Common as the structural material."},{"start_s":915.673,"end_s":925.326,"action":"Returned to the GL floor plan with wall type W2 active, then clicked and navigated across the wall area while remaining in Place Wall mode.","intent":"Position or begin placing the modified W2 wall in the floor plan.","app":"Autodesk Revit","details":"W2 is shown in the Properties panel and the status bar indicates horizontal wall placement."},{"start_s":925.326,"end_s":942.703,"action":"Scrolled and clicked through the floor plan, canceled an interaction with Escape, and selected the wall near the living-room and utility boundary; then opened its type properties.","intent":"Inspect the placed or selected wall and review its type settings.","app":"Autodesk Revit","details":"The selected element is a Basic Wall W2, and the final event opens Type Properties."},{"start_s":942.703,"end_s":951.311,"action":"Opened Edit Assembly for Basic Wall W2, reviewed the 0.550-inch layer thickness, and returned to Type Properties showing the wall width updated to 0.600.","intent":"Review and apply the wall assembly thickness and resulting type width.","app":"Autodesk Revit","details":"The Edit Assembly dialog shows the Brick, Common layer at 0.550; Type Properties shows Width 0.600."},{"start_s":951.311,"end_s":960.531,"action":"Adjusted the Revit view around the selected wall using clicks and scrolling, moving from a close-up wall view to a wider floor-plan area near the utility room.","intent":"Inspect the selected wall in context.","app":"Autodesk Revit","details":"A Basic Wall W2 remained selected; the view was navigated without a clearly visible property change."},{"start_s":960.531,"end_s":970.526,"action":"Exited the prior selection state, navigated the floor plan with clicks and scrolling, and selected a wall segment near the utility and corridor area.","intent":"Locate and inspect another wall segment in the floor plan.","app":"Autodesk Revit","details":"The final view shows Basic Wall WALL 1 selected beside the utility room and wide corridor."},{"start_s":970.526,"end_s":980.502,"action":"Navigated across the floor plan with panning and zooming, reviewing bedrooms, toilets, the pooja area, dining space, and adjacent walls while changing the selected wall context.","intent":"Review wall layout across multiple rooms.","app":"Autodesk Revit","details":"The view ends on a close-up of a selected wall along the bedroom and balcony area."},{"start_s":980.502,"end_s":990.517,"action":"Panned and zoomed to the living room, balcony, and kitchen, then entered wall placement mode and positioned the view near the kitchen wall.","intent":"Prepare to place or modify a wall near the kitchen.","app":"Autodesk Revit","details":"The final screen shows Modify | Place Wall with Basic Wall W2 active and the view tightly zoomed near the refrigerator and sink."},{"start_s":990.517,"end_s":1003.942,"action":"Continued navigating and zooming around the kitchen and living room, selected a wall segment, and left the view showing the living room and kitchen with the wall highlighted.","intent":"Select and inspect the kitchen-side wall before editing its type.","app":"Autodesk Revit","details":"The selected wall is visible beside the refrigerator and kitchen counter."},{"start_s":1003.942,"end_s":1011.477,"action":"Opened Type Properties for Basic Wall W2, opened Edit Assembly, changed the Brick, Common layer thickness to 0.57 feet, and returned to the type-properties dialog.","intent":"Modify the wall assembly thickness.","app":"Autodesk Revit","details":"Edit Assembly shows the Brick, Common layer at 0.57 thickness; the Type Properties dialog remains open."},{"start_s":1011.477,"end_s":1022.514,"action":"Exited the current wall interaction, selected a wall near the kitchen, and zoomed and panned around the floor plan.","intent":"Inspect wall geometry and placement in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained open with the selected wall shown in cyan."},{"start_s":1022.514,"end_s":1033.04,"action":"Selected and inspected the wall along the balcony edge, zooming and panning to view its full length and nearby openings.","intent":"Review the balcony wall and its relationship to adjacent rooms.","app":"Autodesk Revit","details":"The selected wall was visible across the balcony boundary."},{"start_s":1033.04,"end_s":1043.045,"action":"Zoomed and panned across the floor plan from the balcony toward the drawing room and bedroom area, then cleared the wall selection.","intent":"Navigate and inspect other wall locations in the plan.","app":"Autodesk Revit","details":"The view ended on a wider unselected floor-plan view."},{"start_s":1043.045,"end_s":1053.399,"action":"Entered wall placement mode, navigated and zoomed into the bedroom and adjacent living area, and positioned the wall tool for a new wall segment.","intent":"Prepare to place a wall in the floor plan.","app":"Autodesk Revit","details":"Modify | Place Wall was active with Basic Wall W2 and the wall start-point prompt visible."},{"start_s":1053.399,"end_s":1063.477,"action":"Kept the wall placement tool active while panning and zooming around the bedroom and living-area boundary, then clicked to define a wall point and displayed temporary dimensions.","intent":"Locate and begin defining a new wall segment.","app":"Autodesk Revit","details":"A temporary dimension of about 2.417 feet was visible near the wall endpoint."},{"start_s":1063.477,"end_s":1073.317,"action":"Continued positioning the wall endpoint around the bathroom and dressing area, used the wall placement controls, and then exited the active placement interaction.","intent":"Inspect and adjust the proposed wall placement near the bathroom area.","app":"Autodesk Revit","details":"The final view showed the bathroom and dressing rooms with no active wall-placement ribbon."},{"start_s":1073.317,"end_s":1083.313,"action":"Scrolled and navigated the GL floor plan, entered brief keyboard input, then activated wall placement and clicked in the plan.","intent":"Navigate the floor plan and begin placing a wall.","app":"Autodesk Revit","details":"Wall placement mode was active at the end of the span."},{"start_s":1083.313,"end_s":1093.133,"action":"Scrolled and adjusted the view, exited and re-entered commands, then selected a wall segment in the floor plan.","intent":"Inspect and select a wall element for editing.","app":"Autodesk Revit","details":"The selected wall displayed cyan highlighting and wall properties."},{"start_s":1093.133,"end_s":1103.175,"action":"Exited the active command, panned and zoomed across the floor plan, and clicked through wall and raster-plan elements around the bedrooms and living area.","intent":"Review the floor plan and inspect nearby elements.","app":"Autodesk Revit","details":"The view moved from the toilet area to the bedroom and living-room region."},{"start_s":1103.175,"end_s":1112.993,"action":"Navigated and zoomed to another portion of the GL floor plan, then continued wall placement and clicked near bedroom and toilet partitions.","intent":"Position the view and continue wall layout work.","app":"Autodesk Revit","details":"Wall placement remained active while the view showed bedroom and toilet areas."},{"start_s":1112.993,"end_s":1132.23,"action":"Navigated and zoomed around the selected wall, clicked wall geometry, and switched to the wall type controls, ending with the Type Properties window opened.","intent":"Open the selected wall type properties for modification.","app":"Autodesk Revit","details":"The selected wall was WALL 1; the transition ended on its Type Properties window."},{"start_s":1132.23,"end_s":1140.742,"action":"Opened Edit Assembly from Type Properties, entered 0.65 feet for the wall layer thickness, confirmed the assembly, and returned to Type Properties.","intent":"Change the wall assembly thickness.","app":"Autodesk Revit","details":"Type Properties showed WALL 1 with width 0.650 and structural material Brick, Common."},{"start_s":1140.742,"end_s":1150.414,"action":"Scrolled and clicked within the GL floor plan, moving between a selected wall and the raster-image underlay showing ODU, shaft, and toilet areas; resized the Revit window and changed the selection to the raster image.","intent":"Inspect the floor-plan underlay and nearby wall elements.","app":"Autodesk Revit","details":"Visible GL plan with wall and raster-image selections."},{"start_s":1150.414,"end_s":1170.414,"action":"Selected wall W2 and panned/zoomed around the wall beside the toilet underlay, leaving the wall highlighted in cyan.","intent":"Inspect the position and properties of wall W2 relative to the plan underlay.","app":"Autodesk Revit","details":"Properties panel showed Basic Wall W2 with dimensions and constraints."},{"start_s":1170.414,"end_s":1180.789,"action":"Scrolled and clicked through the GL plan, switching between wall selections and the raster-image underlay while panning across the toilet and ODU areas.","intent":"Review wall and underlay alignment in different portions of the floor plan.","app":"Autodesk Revit","details":"The view moved from a close wall view to the ODU and TOILET-1 region."},{"start_s":1180.789,"end_s":1190.778,"action":"Panned and zoomed across the toilet and bedroom portions of the plan, then activated Place Wall and positioned the view near the partition between the toilets.","intent":"Prepare to place a wall along the floor-plan layout.","app":"Autodesk Revit","details":"Modify | Place Wall mode was active with Basic Wall W2 selected."},{"start_s":1190.778,"end_s":1200.847,"action":"Kept Place Wall active while panning and zooming from the toilet area toward the POOJA and DINING regions; clicked in the plan and moved the wall-placement cursor without a clearly completed wall segment.","intent":"Position and begin laying out a wall using the raster underlay as reference.","app":"Autodesk Revit","details":"Status prompts indicated wall start/end-point placement; no completed wall is clearly visible."},{"start_s":1200.847,"end_s":1210.16,"action":"Scrolled and panned within the GL plan while continuing Place Wall mode, moving the placement cursor around the toilet and adjacent room boundary.","intent":"Continue positioning the wall placement along the plan boundary.","app":"Autodesk Revit","details":"Wall placement remained active and the view ended near a toilet-side partition."},{"start_s":1210.16,"end_s":1221.899,"action":"Exited and re-entered Revit, then zoomed and panned around the selected wall near Toilet-2 and Bedroom-2.","intent":"Inspect the wall location and surrounding floor-plan geometry.","app":"Autodesk Revit","details":"Wall W2 remained selected in Floor Plan: GL."},{"start_s":1221.899,"end_s":1227.039,"action":"Switched within Revit, zoomed the floor plan, and opened the wall type selector showing WALL 1 and other Basic Wall types.","intent":"Review or prepare to change the selected wall type.","app":"Autodesk Revit","details":"The type list was visible over the plan near Toilet-2 and Bedroom-2."},{"start_s":1227.039,"end_s":1236.864,"action":"Scrolled and panned across the floor plan, then activated Place Wall mode and navigated toward the drawing area.","intent":"Position the view for wall placement or editing.","app":"Autodesk Revit","details":"Place Wall controls and wall placement options were visible at the end."},{"start_s":1236.864,"end_s":1246.926,"action":"Clicked and dragged in the drawing area while Place Wall remained active, then exited the placement interaction and returned to a selected wall view.","intent":"Attempt to place or adjust a wall segment in the floor plan.","app":"Autodesk Revit","details":"The status bar showed wall endpoint placement during the interaction."},{"start_s":1246.926,"end_s":1258.53,"action":"Selected a horizontal wall segment and zoomed or panned out to the sheet area, revealing the Block-A: First Floor schedule table.","intent":"Inspect the selected wall in the broader floor-plan context.","app":"Autodesk Revit","details":"The selected wall properties showed length and area values; the schedule was visible afterward."},{"start_s":1258.53,"end_s":1269.648,"action":"Zoomed farther out and panned across the sheet, changing from a close schedule view to an overview of the complete first-floor plan and schedule.","intent":"Review the overall sheet layout and floor-plan arrangement.","app":"Autodesk Revit","details":"The final view showed multiple apartment layouts, the central circulation area, and the schedule at lower right."},{"start_s":1269.648,"end_s":1279.186,"action":"Scrolled and zoomed the GL floor plan out, clicking within the drawing to reposition the view and reveal multiple apartment layouts and the area schedule.","intent":"Review the overall floor plan and schedule.","app":"Autodesk Revit","details":"A wall remained selected while the view changed from a close apartment view to a wider plan view."},{"start_s":1279.186,"end_s":1294.414,"action":"Repositioned the floor plan with middle-click navigation, bringing the central lobby, stairs, elevators, and surrounding apartment units into view.","intent":"Inspect another region of the floor plan.","app":"Autodesk Revit","details":"The GL floor plan remained open with the selected wall and raster underlay visible."},{"start_s":1294.414,"end_s":1304.484,"action":"Clicked and scrolled to navigate across the plan, then zoomed into an apartment area showing bedrooms, bathrooms, living, dining, kitchen, and balcony spaces.","intent":"Inspect apartment layout details.","app":"Autodesk Revit","details":"The selected wall was visible in the close-up apartment view."},{"start_s":1304.484,"end_s":1314.327,"action":"Exited the prior mode, activated Place Wall, and navigated to a close-up near the pooja and dining area; positioned the wall tool for a new wall start point.","intent":"Prepare to place or modify a wall in the apartment plan.","app":"Autodesk Revit","details":"Revit briefly hid and restored windows while the wall placement tool became active."},{"start_s":1314.327,"end_s":1329.764,"action":"Navigated and zoomed around the apartment underlay, then activated Place Wall and moved to a highly magnified wall location near the bathroom and adjacent room boundary.","intent":"Position the wall tool at a precise drawing location.","app":"Autodesk Revit","details":"The view ended at extreme zoom with the wall placement command awaiting a start point."},{"start_s":1329.764,"end_s":1339.065,"action":"Opened Type Properties for Basic Wall W2, duplicated the type and entered W3, then opened Edit Assembly to review the wall layer structure and thickness.","intent":"Create and inspect a new wall type based on W2.","app":"Autodesk Revit","details":"The Edit Assembly dialog showed type W3 with a 0.570-inch Brick, Common structural layer."},{"start_s":1339.065,"end_s":1352.242,"action":"Activated the wall placement tool, clicked and navigated around the GL floor plan, then exited the active interaction and selected the wall type for editing.","intent":"Prepare a wall type for parameter modification.","app":"Autodesk Revit","details":"The GL floor plan remained visible, with a Basic Wall W3 selected near the pool area."},{"start_s":1352.242,"end_s":1357.451,"action":"Opened Type Properties for Basic Wall W3, entered the assembly editor, changed the layer thickness to 0.4 feet, and returned to Type Properties.","intent":"Adjust the wall assembly thickness.","app":"Autodesk Revit","details":"Edit Assembly showed the Brick, Common layer thickness set to 0.4."},{"start_s":1357.451,"end_s":1364.897,"action":"Reopened the wall assembly editor, reviewed the 0.4-foot layer value, closed the assembly and Type Properties dialogs, and returned to the GL floor plan.","intent":"Review and apply the wall assembly change.","app":"Autodesk Revit","details":"Type Properties displayed Basic Wall W3 with width 0.400 and the assembly editor showed the 0.4 layer thickness."},{"start_s":1364.897,"end_s":1375.274,"action":"Selected the Basic Wall W3 and panned and zoomed the GL floor plan around the pool and adjacent rooms while keeping the wall selected.","intent":"Inspect the modified wall in the floor plan.","app":"Autodesk Revit","details":"The selected wall was highlighted in cyan; the pool label and surrounding plan geometry became visible."},{"start_s":1375.274,"end_s":1388.625,"action":"Navigated further around the floor plan, typed a short search-like input, resized the Revit window, and selected the wall again near the pool area.","intent":"Continue inspecting and positioning the wall selection.","app":"Autodesk Revit","details":"The view shifted across the pool and adjacent room; the Basic Wall W3 remained selected at the end."},{"start_s":1388.625,"end_s":1397.24,"action":"Opened Type Properties and Edit Assembly for Basic Wall W3, changed the layer thickness to 0.375 feet, and returned to Type Properties.","intent":"Refine the wall assembly thickness.","app":"Autodesk Revit","details":"Edit Assembly showed the Brick, Common layer at 0.3 in the field, while total wall thickness displayed 0.400 feet."},{"start_s":1397.24,"end_s":1407.734,"action":"Navigated within the Revit floor plan by scrolling and clicking, ending with the GL plan shown at a wider view.","intent":"Inspect the floor plan layout.","app":"Autodesk Revit","details":"The view changed from a close-up wall selection to the furnished GL floor plan."},{"start_s":1407.734,"end_s":1426.526,"action":"Switched to the Revit 3D view, manipulated the view with scrolling and middle-clicks, then returned to the GL floor plan before switching to Windows Explorer.","intent":"Review the model in 3D and return to the plan.","app":"Autodesk Revit","details":"The 3D view briefly showed a dark model view; the final Revit state was the GL floor plan."},{"start_s":1426.526,"end_s":1432.818,"action":"Kept the GL floor plan active and scrolled to zoom into the dining, living, toilet, dress, and bedroom areas, then clicked within the plan.","intent":"Inspect a detailed portion of the floor plan.","app":"Autodesk Revit","details":"The view ended centered on the dining and adjacent rooms."},{"start_s":1432.818,"end_s":1451.771,"action":"Paused on the detailed GL floor plan, then middle-clicked and scrolled to further zoom and reposition around the M. Toilet, Dress, Dining, and M. Bedroom areas.","intent":"Continue examining the plan detail.","app":"Autodesk Revit","details":"The final view was a close-up of the M. Toilet, Dress, Dining, and part of the M. Bedroom."},{"start_s":1451.771,"end_s":1461.668,"action":"Scrolled and clicked within the close-up plan, entered the Scale tool, and adjusted the view while the tool remained active; pressed Escape to cancel or exit the intermediate operation.","intent":"Prepare or inspect a plan scaling operation.","app":"Autodesk Revit","details":"The ribbon showed Modify | Scale and the status bar prompted for an origin; no completed scale result is visible."},{"start_s":1461.668,"end_s":1471.554,"action":"Entered wall placement mode and positioned the cursor along the close-up plan, then clicked and scrolled to reposition the view while keeping Place Wall active.","intent":"Begin placing a wall in the floor plan.","app":"Autodesk Revit","details":"The ribbon showed Modify | Place Wall for Basic Wall W3; no confirmed wall placement is visible."},{"start_s":1471.554,"end_s":1481.321,"action":"Exited and re-entered Revit wall-editing states, entered a few keyboard commands, resized the window, and left wall placement active while zooming into the master toilet area.","intent":"Adjust and inspect wall placement in the floor plan.","app":"Autodesk Revit","details":"The view changed from the master toilet wall to a close-up near the sink and dressing area."},{"start_s":1481.321,"end_s":1491.754,"action":"Navigated around the GL floor plan with middle-click panning and scrolling, then activated aligned dimension placement and positioned the view over the dressing area.","intent":"Prepare to place or inspect dimensions on the floor plan.","app":"Autodesk Revit","details":"The final view shows the DRESS room labeled 8' 0\" x 4' 8\" with dimension placement active."},{"start_s":1491.754,"end_s":1501.336,"action":"Used aligned dimension placement with tab navigation and clicks, then canceled the operation and zoomed or panned out to review the broader floor plan.","intent":"Place or review dimensions around the dressing and adjacent rooms.","app":"Autodesk Revit","details":"The view ended on a wider plan showing the master toilet, dressing room, bedrooms, dining, and living areas."},{"start_s":1501.336,"end_s":1511.498,"action":"Panned and scrolled to the upper bedrooms and bathrooms, selected references for aligned dimensions, and continued positioning the dimension tool across TOILET-1 and TOILET-2.","intent":"Dimension or inspect the bathroom layout.","app":"Autodesk Revit","details":"The final view shows TOILET-1 and TOILET-2, each labeled 6' 0\" x 8' 0\", with aligned dimension placement still active."},{"start_s":1511.498,"end_s":1530.429,"action":"Placed or adjusted additional aligned dimension references, navigated to the lower bedroom, living, kitchen, and balcony area, then switched into the Basic Wall type properties workflow.","intent":"Inspect the plan and open wall type settings for modification.","app":"Autodesk Revit","details":"The view moved to the lower-right portion of the plan before the Type Properties workflow was opened."},{"start_s":1530.429,"end_s":1538.272,"action":"Opened the Basic Wall W3 type properties, initiated Rename, entered a new name beginning with W4, opened Edit Assembly, entered 1' as a value, and returned to the Type Properties dialog.","intent":"Rename and edit the Basic Wall type assembly.","app":"Autodesk Revit","details":"The Rename dialog initially showed W3 selected; the later Type Properties window was visible after the assembly edit."},{"start_s":1538.272,"end_s":1549.418,"action":"Navigated and zoomed/panned around the GL floor plan while the Wall placement tool remained active, then pressed Escape to cancel or exit the current operation.","intent":"Inspect the floor plan and adjust the view while working with walls.","app":"Autodesk Revit","details":"The view remained centered near the balcony and adjacent rooms; no completed wall placement is evident."},{"start_s":1549.418,"end_s":1563.04,"action":"Zoomed and panned to the bathroom and adjacent wall area, briefly entered Scale mode, then returned to Wall placement and continued adjusting the view.","intent":"Position the floor-plan view and prepare the wall geometry for editing.","app":"Autodesk Revit","details":"The visible result shifted from the balcony toward the bathroom/window area; no confirmed scale change is visible."},{"start_s":1563.04,"end_s":1572.928,"action":"Opened the wall-type list, selected Basic Wall: WALL 1, zoomed out, and began positioning a wall segment near the bathroom and balcony junction before pressing Escape.","intent":"Choose a wall type and start placing a wall in the floor plan.","app":"Autodesk Revit","details":"The wall-type dropdown visibly changed from W4 to WALL 1, and a temporary wall placement preview appeared."},{"start_s":1572.928,"end_s":1591.025,"action":"Selected and edited wall geometry near the bathroom, zoomed and panned around the junction, then used alignment-related commands to adjust the selected wall.","intent":"Refine the location and alignment of the newly placed wall.","app":"Autodesk Revit","details":"A wall was selected and highlighted; the Align tool was active near the end of the span."},{"start_s":1591.025,"end_s":1601.118,"action":"Selected the wall and adjusted its geometry with clicks, zooming and panning around the bathroom junction; dimension readouts appeared while the wall remained selected.","intent":"Inspect and fine-tune the wall position and dimensions.","app":"Autodesk Revit","details":"The selected wall was shown in cyan with temporary dimensions, including approximately 2.342 and 1.103."},{"start_s":1601.118,"end_s":1609.804,"action":"Selected another wall segment labeled W2, zoomed and panned to a different room area, and continued alignment or inspection actions before leaving the wall selected.","intent":"Review and adjust another wall segment in the floor plan.","app":"Autodesk Revit","details":"The view moved to a room containing a small furniture or fixture image; the W2 wall remained selected with dimensions visible initially."},{"start_s":1609.804,"end_s":1629.804,"action":"Remained idle in Autodesk Revit with the GL floor plan visible.","intent":"No active interaction occurred.","app":"Autodesk Revit","details":null},{"start_s":1629.804,"end_s":1644.99,"action":"Clicked and repositioned the floor-plan view, leaving the bedroom, living area, and balcony visible at a closer framing.","intent":"Adjusted the view to inspect the floor plan.","app":"Autodesk Revit","details":null},{"start_s":1644.99,"end_s":1654.273,"action":"Navigated and resized the Revit window, selected the raster background image, then entered wall placement mode at a zoomed-in balcony area.","intent":"Prepared to add or edit wall geometry over the floor-plan background.","app":"Autodesk Revit","details":"The raster image was selected before wall placement mode became active."},{"start_s":1654.273,"end_s":1672.0,"action":"Placed and edited a Basic Wall W3 segment along the balcony edge, then selected the resulting wall for modification.","intent":"Create a wall segment aligned with the floor-plan layout.","app":"Autodesk Revit","details":"The selected wall segment is highlighted in cyan and shows temporary dimensions."},{"start_s":1672.0,"end_s":1681.914,"action":"Dismissed the warning and adjusted the selected wall segment by dragging its endpoint; Revit displayed a warning that highlighted walls overlap.","intent":"Correct the wall placement while responding to the overlap warning.","app":"Autodesk Revit","details":"The warning stated that highlighted walls overlap and one may be ignored when Revit finds room boundaries."},{"start_s":1681.914,"end_s":1691.965,"action":"Scrolled to the adjacent kitchen and exterior area, dragged the wall endpoint to extend or reposition the selected wall, and left the wall selected.","intent":"Continue aligning the wall geometry with adjacent plan features.","app":"Autodesk Revit","details":"The wall remains highlighted with temporary dimensions near the kitchen and balcony junction."},{"start_s":1691.965,"end_s":1702.104,"action":"Navigated to Autodesk Revit and manipulated the 3D view with repeated middle-button drags and scrolling, changing the model orientation and zoom.","intent":"Inspect the building model from different 3D viewpoints.","app":"Autodesk Revit","details":"Project1 3D View: {3D} remained open."},{"start_s":1702.104,"end_s":1712.206,"action":"Continued navigating the Revit model with middle-button view manipulation, then switched from the 3D view to the GL floor plan.","intent":"Review the building layout in plan view.","app":"Autodesk Revit","details":"The GL floor plan opened and displayed a furnished apartment layout."},{"start_s":1712.206,"end_s":1721.05,"action":"Paused on the GL floor plan and made a brief scroll adjustment.","intent":"Continue reviewing the floor plan.","app":"Autodesk Revit","details":"The furnished GL floor plan remained visible."},{"start_s":1721.05,"end_s":1731.197,"action":"Zoomed and panned around the GL floor plan with scrolling and middle-button drags, bringing the balcony, living room, bedroom, and kitchen into closer view.","intent":"Inspect details of the furnished floor plan.","app":"Autodesk Revit","details":"The view ended centered on the balcony and adjacent living and kitchen areas."},{"start_s":1731.197,"end_s":1741.171,"action":"Continued zooming and panning across the GL floor plan, moving from the full apartment toward a close-up of the balcony and living area.","intent":"Examine floor-plan details at different scales.","app":"Autodesk Revit","details":"The balcony label and surrounding furnishings became prominent."},{"start_s":1741.171,"end_s":1761.171,"action":"Made a brief scroll adjustment and then remained on the zoomed GL floor plan.","intent":"Continue reviewing the floor plan.","app":"Autodesk Revit","details":"The close view showed the bedroom, living room, kitchen edge, and wide balcony."},{"start_s":1761.171,"end_s":1773.199,"action":"Scrolled the Revit floor plan view without changing the visible model.","intent":"Review the floor plan at the current zoom and position.","app":"Autodesk Revit","details":null},{"start_s":1773.199,"end_s":1783.967,"action":"Scrolled and zoomed the floor plan from a broader apartment view into the living room, kitchen, utility, and balcony area, then clicked within the view.","intent":"Inspect the apartment layout and focus on the kitchen-side area.","app":"Autodesk Revit","details":null},{"start_s":1783.967,"end_s":1803.967,"action":"Clicked and scrolled further into the floor plan, leaving a close-up of the kitchen, refrigerator, sink, appliances, and wide utility area.","intent":"Examine the kitchen and utility layout in detail.","app":"Autodesk Revit","details":null},{"start_s":1803.967,"end_s":1822.119,"action":"Reviewed the close-up kitchen and utility view, then scrolled out to show a broader portion of the floor plan and clicked in the drawing area.","intent":"Return to a wider view of the apartment arrangement.","app":"Autodesk Revit","details":null},{"start_s":1822.119,"end_s":1835.797,"action":"Scrolled and adjusted the floor plan to a wider two-unit view, then clicked near the lower screen area before switching to Windows Explorer.","intent":"Review the overall plan before changing applications.","app":"Autodesk Revit","details":"The recorded application switch to Windows Explorer occurs at the end of the span."},{"start_s":1835.797,"end_s":1840.832,"action":"Switched briefly through the recorder and back to Revit, dismissed or passed the “Project Not Saved Recently” notification, scrolled the plan, and activated Place Wall with Basic Wall type W3.","intent":"Resume editing the floor plan and prepare to place a wall.","app":"Autodesk Revit","details":"The final view shows Revit in Modify | Place Wall mode with a wall placement cursor near the lower-right plan area."},{"start_s":1840.832,"end_s":1850.484,"action":"Switched to Revit, selected wall placement controls and wall types, navigated the floor plan with clicks and middle-button scrolling, then pressed Escape as the view shifted.","intent":"Position and configure a wall element in the floor plan.","app":"Autodesk Revit","details":"Wall placement mode was active with Basic Wall types visible."},{"start_s":1850.484,"end_s":1864.957,"action":"Adjusted the Revit window and interacted with the selected wall and floor plan, then dismissed active commands while the view changed; a WhatsApp payment reminder notification appeared near the end.","intent":"Continue reviewing or positioning the wall in the plan.","app":"Autodesk Revit","details":"The selected Basic Wall was shown in Modify Walls mode; a WhatsApp notification reported a Meesho Pay Later payment due."},{"start_s":1864.957,"end_s":1875.556,"action":"Returned focus to Revit, entered wall-related input, clicked and scrolled around the plan, and selected the wall segment spanning the lower part of the view.","intent":"Inspect and modify the selected wall geometry.","app":"Autodesk Revit","details":"The wall was highlighted in cyan and displayed as Basic Wall: WALL 1."},{"start_s":1875.556,"end_s":1889.491,"action":"Scrolled and panned across the floor plan from the living and bedroom area toward the kitchen, then activated wall placement and left the view zoomed into the kitchen and utility area.","intent":"Navigate to the kitchen area and prepare to place or inspect a wall.","app":"Autodesk Revit","details":"The plan showed labeled Living, Kitchen, and Wide Utility areas; wall placement mode was active at the end."},{"start_s":1889.491,"end_s":1899.575,"action":"Kept wall placement active, navigated around the kitchen and utility room with middle-button panning and scrolling, and positioned the cursor near a wall and door opening.","intent":"Position a new wall endpoint or inspect wall alignment in the kitchen area.","app":"Autodesk Revit","details":"Basic Wall W3 was active; temporary dimensions and a door swing were visible."},{"start_s":1899.575,"end_s":1911.743,"action":"Scrolled and panned across the plan, selected a wall, pressed Escape, and adjusted the view before returning to wall placement with the cursor ready for a start point.","intent":"Refine the wall selection and reposition the view for further wall work.","app":"Autodesk Revit","details":"A vertical wall was highlighted during modification, and the final view showed wall placement mode with Basic Wall W3."},{"start_s":1911.743,"end_s":1920.939,"action":"Switched to Autodesk Revit, navigated the GL floor plan with scrolling and clicks, and left wall placement active before hiding and restoring the application window.","intent":"Inspect the floor plan and prepare or adjust wall placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained highly zoomed in around a wall and opening."},{"start_s":1920.939,"end_s":1926.5,"action":"Exited the current command, entered keyboard input, and opened the wall type selector; selected Basic Wall: WALL 1 from the visible list.","intent":"Choose a wall type for placement.","app":"Autodesk Revit","details":"The wall type dropdown showed Basic Wall options including W2, W3, W4, and WALL 1."},{"start_s":1926.5,"end_s":1938.163,"action":"Scrolled through the wall type list, selected Basic Wall: W4, and clicked in the plan to begin positioning a wall segment; canceled once and returned to the placement state.","intent":"Select a wall type and position a wall segment in the floor plan.","app":"Autodesk Revit","details":"A temporary horizontal dimension of about 1.271 feet appeared during wall placement."},{"start_s":1938.163,"end_s":1944.698,"action":"Scrolled and clicked in the plan while placing Basic Wall: W2, creating a temporary horizontal wall segment with an approximately 0.979-foot dimension, then canceled the active command.","intent":"Test or position another wall segment using the W2 type.","app":"Autodesk Revit","details":"The plan remained zoomed into the same wall/opening area."},{"start_s":1944.698,"end_s":1955.237,"action":"Selected Basic Wall: W3, clicked to place a wall segment, canceled the placement command, and dragged across the plan area while the wall tool remained active.","intent":"Place and adjust a wall segment near the existing opening.","app":"Autodesk Revit","details":"The selected W3 wall was visible as a horizontal segment spanning the opening area."},{"start_s":1955.237,"end_s":1964.789,"action":"Selected the W3 wall, entered wall modification mode, and scrolled and panned around the selected wall while reviewing its dimensions and placement.","intent":"Inspect or refine the selected wall geometry.","app":"Autodesk Revit","details":"The wall was highlighted cyan; Properties showed length about 1.479 feet, area 1.181 square meters, and volume 0.135 cubic meters."},{"start_s":1964.789,"end_s":1975.907,"action":"Scrolled repeatedly through the Revit GL floor plan, changing the zoom from a close view of the dining and living areas to a broader view of the apartment layouts.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":null},{"start_s":1975.907,"end_s":1985.947,"action":"Scrolled and navigated around the GL floor plan, then switched to the Project1 3D view to inspect the modeled walls and room layout.","intent":"Inspect the building model in plan and 3D views.","app":"Autodesk Revit","details":null},{"start_s":1985.947,"end_s":1990.015,"action":"Adjusted the 3D view, then returned to the GL floor plan and zoomed out to show more of the apartment arrangement.","intent":"Compare the 3D model with the floor plan.","app":"Autodesk Revit","details":null},{"start_s":1990.015,"end_s":2006.687,"action":"Reviewed the GL floor plan and scrolled to reposition and zoom the view across the apartment layouts, ending on a closer view of the dining, living, kitchen, and utility areas.","intent":"Examine different areas of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":2006.687,"end_s":2014.251,"action":"Navigated and zoomed within the GL floor plan to focus on the drawing room, living room, kitchen, and wide utility area.","intent":"Inspect the central living and service spaces in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":2014.251,"end_s":2023.299,"action":"Scrolled and repositioned the GL floor plan, moving from the living and kitchen area to a broader view showing bedrooms, dining, drawing, lobby, and utility spaces.","intent":"Review the overall apartment layout and adjacent rooms.","app":"Autodesk Revit","details":null},{"start_s":2023.299,"end_s":2034.386,"action":"Scrolled and zoomed the GL floor-plan view around the dining and drawing areas, leaving the dining room centered at a closer scale.","intent":"Inspect the floor-plan layout and room details.","app":"Autodesk Revit","details":null},{"start_s":2034.386,"end_s":2044.119,"action":"Scrolled and adjusted the floor-plan view, then selected the raster floor-plan image; briefly moved or resized the Revit window and returned to the active view.","intent":"Navigate and inspect the imported floor-plan image.","app":"Autodesk Revit","details":"The raster image became selected, showing the Modify | Raster Images contextual tools."},{"start_s":2044.119,"end_s":2055.452,"action":"Navigated and zoomed the floor plan, entered a scale operation on the raster image, then switched to door placement and selected the Doors_ExtDbl_Flush door type.","intent":"Adjust the plan view and begin placing a door.","app":"Autodesk Revit","details":"The view ended with the Place Door tool active and the door family shown in Properties."},{"start_s":2055.452,"end_s":2063.449,"action":"Opened Type Properties for the door, opened the type-name dialog, and replaced the existing type name with “3' DOOR”.","intent":"Create a clearly named door type.","app":"Autodesk Revit","details":"The Name dialog displayed the entered type name “3' DOOR”."},{"start_s":2063.449,"end_s":2069.648,"action":"Confirmed the renamed door type, edited the Rough Width parameter from approximately 2.657' to 3', and clicked OK to apply the type changes.","intent":"Set the new door type to a three-foot rough width.","app":"Autodesk Revit","details":"Type Properties showed type “3' DOOR” and Rough Width set to 3.000'."},{"start_s":2069.648,"end_s":2079.811,"action":"Returned to the GL floor plan with the 3' DOOR type active, zoomed toward the bedroom and living-room doorway, and positioned the door-placement cursor on a wall without completing a placement.","intent":"Prepare to place the newly configured door in the floor plan.","app":"Autodesk Revit","details":"The status prompt instructed clicking a wall to place the door; no completed placement is evidenced."},{"start_s":2079.811,"end_s":2090.131,"action":"Scrolled around the GL floor plan while the Doors_IntSgl 3' DOOR tool remained active, then clicked near the doorway and left the door placement preview visible.","intent":"Position and inspect a door placement location on the floor plan.","app":"Autodesk Revit","details":"The view shows the POOJA and DINING area with a door swing preview and temporary dimensions."},{"start_s":2090.131,"end_s":2098.566,"action":"Scrolled and repositioned the GL floor plan, then clicked near the opening beside the DINING area while the door placement command remained active.","intent":"Inspect another doorway and adjust the view for possible door placement.","app":"Autodesk Revit","details":"The view shifts from the POOJA/DINING area toward the adjacent bedrooms and drawing room; no completed door placement is clearly shown."},{"start_s":2098.566,"end_s":2108.479,"action":"Scrolled outward through the GL floor plan from the apartment rooms to a broad building overview and clicked within the canvas while the placement command remained active.","intent":"Review the overall floor-plan layout and navigate to another area.","app":"Autodesk Revit","details":"The final view shows multiple apartment units around a central lobby and circulation core."},{"start_s":2108.479,"end_s":2126.795,"action":"Paused on the zoomed-out GL floor plan, then clicked and scrolled slightly near the lower portion of the drawing before pressing Escape twice.","intent":"Exit or cancel the active door placement workflow after reviewing the plan.","app":"Autodesk Revit","details":"The floor plan remains zoomed out with multiple units and a schedule visible near the bottom."},{"start_s":2126.795,"end_s":2136.999,"action":"Scrolled and panned across the GL floor plan, moving from the lower schedule area to a closer view of apartment rooms and the lobby.","intent":"Navigate and inspect another section of the floor plan.","app":"Autodesk Revit","details":"The Properties panel shows Floor Plan: GL, and the visible rooms include bedrooms, toilets, POOJA, DINING, DRAWING, and LIVING."},{"start_s":2136.999,"end_s":2147.04,"action":"Panned and zoomed within the GL floor plan, briefly viewing the full building arrangement before settling on a closer apartment layout.","intent":"Refine the view for detailed inspection of the apartment plan.","app":"Autodesk Revit","details":"The final view clearly shows bedrooms, toilets, POOJA, DINING, DRAWING, LIVING, and the adjacent lobby."},{"start_s":2147.04,"end_s":2160.25,"action":"Reviewed the Revit GL floor plan while leaving the view largely unchanged.","intent":"Inspect the floor plan.","app":"Autodesk Revit","details":null},{"start_s":2160.25,"end_s":2170.115,"action":"Zoomed and panned across the GL floor plan to show two adjacent apartment layouts, then entered text resembling “DR” while repositioning the Revit window.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":"The view changed from a closer apartment plan to a wider view of two units."},{"start_s":2170.115,"end_s":2181.096,"action":"Exited transient commands, selected a wall, and zoomed tightly into the wall and doorway area while Revit displayed Modify | Scale.","intent":"Inspect or modify a wall element.","app":"Autodesk Revit","details":"A wall became highlighted and a temporary dimension was visible."},{"start_s":2181.096,"end_s":2191.071,"action":"Panned and zoomed through the floor plan, selecting wall areas and adjusting the view around the dress and bedroom spaces while remaining in Modify | Scale.","intent":"Inspect scaled wall geometry in the floor plan.","app":"Autodesk Revit","details":"The view moved between close-ups of room boundaries, doors, and dimensions."},{"start_s":2191.071,"end_s":2199.724,"action":"Continued navigating the raster-backed floor plan, briefly selecting the raster image and then zooming into Toilet-1 and its doorway dimensions.","intent":"Inspect alignment and dimensions around the bathroom doorway.","app":"Autodesk Revit","details":"The raster image was selected briefly; temporary dimensions appeared near the doorway."},{"start_s":2199.724,"end_s":2211.558,"action":"Zoomed and panned around the bedroom, toilets, pooja, dining, and drawing areas, exited the scale operation, and switched into Modify | Place Door with the Doors_IntSgl 3' DOOR type active.","intent":"Prepare to place an interior door in the floor plan.","app":"Autodesk Revit","details":"The final view showed the door-placement cursor near the dining/pooja doorway."},{"start_s":2211.558,"end_s":2216.668,"action":"Opened the door type naming dialog in Revit and entered “2.5' DOOR,” then confirmed the name.","intent":"Rename the door type.","app":"Autodesk Revit","details":"The Type Properties dialog was open for the Doors_IntSgl family."},{"start_s":2216.668,"end_s":2222.603,"action":"Reviewed and scrolled the Type Properties parameters, confirmed the renamed “2.5' DOOR” type, and entered “2.5'” in a parameter field before confirming the dialog.","intent":"Update the door type properties and return to the floor plan.","app":"Autodesk Revit","details":"The visible type changed from 3' DOOR to 2.5' DOOR; the edited parameter field is not identifiable from the evidence."},{"start_s":2222.603,"end_s":2240.652,"action":"Returned to the GL floor plan with the 2.5' DOOR tool active, panned and zoomed around the plan, and positioned the door placement preview near the bedroom and toilet area.","intent":"Navigate the floor plan and prepare to place the renamed door.","app":"Autodesk Revit","details":"Revit displayed the prompt to click a wall to place the door; no completed placement is clearly shown."},{"start_s":2240.652,"end_s":2247.858,"action":"Scrolled and zoomed the floor plan while keeping the 2.5' DOOR placement tool active, moving the view toward the central dining and pooja area.","intent":"Locate another wall position for door placement.","app":"Autodesk Revit","details":"The floor plan remained in door placement mode."},{"start_s":2247.858,"end_s":2266.584,"action":"Navigated across the floor plan with middle-click panning and scrolling, then pressed Escape to cancel or exit the active placement operation.","intent":"Inspect additional door locations and stop placement.","app":"Autodesk Revit","details":"The view moved from the pooja/dining area toward the living, bedroom, and kitchen areas; no definite new door placement is visible."},{"start_s":2266.584,"end_s":2275.54,"action":"Scrolled and panned to the kitchen and utility area, pressed Escape several times, and switched the active view to the 3D view.","intent":"Finish plan navigation and open the model’s 3D view.","app":"Autodesk Revit","details":"The title changed to “Project1 - 3D View: {3D}” near the end of the span."},{"start_s":2275.54,"end_s":2286.68,"action":"Orbit-pan the Revit 3D view with middle-button drags and scrolling, changing the camera from an overhead wall layout to a closer angled view of the modeled walls and doors.","intent":"Inspect the building model from different 3D viewpoints.","app":"Autodesk Revit","details":null},{"start_s":2286.68,"end_s":2296.584,"action":"Continue orbiting and panning the 3D view, then switch to the GL floor plan; the view changes to a furnished raster-backed plan showing labeled rooms such as Living, Kitchen, and Utility.","intent":"Move from 3D inspection to reviewing the GL floor plan.","app":"Autodesk Revit","details":"The window title changes to Project1 - Floor Plan: GL."},{"start_s":2296.584,"end_s":2314.872,"action":"Interact with the GL floor plan, type the Revit shortcut for placing a door, and navigate around the plan; enter Place Door mode with the Doors_IntSgl 2.5' DOOR type visible, then exit or change the active selection while zooming out.","intent":"Prepare and inspect door placement locations on the GL floor plan.","app":"Autodesk Revit","details":"The plan remains raster-backed and shows rooms including M.Toilet, Dress, Dining, Living, and Drawing."},{"start_s":2314.872,"end_s":2324.731,"action":"Return to the GL floor plan, zoom and pan around the Dress and master bedroom area, invoke alignment, and drag across the wall geometry; the view ends tightly focused on the Dress room boundary with a temporary dimension displayed.","intent":"Align or adjust wall and raster-plan geometry in the selected area.","app":"Autodesk Revit","details":"Raster Images is selected initially, and the Align tool is active near the end of the span."},{"start_s":2324.731,"end_s":2334.183,"action":"Continue dragging and zooming around the Dress-room wall, invoke Align, and select wall edges or segments; the view remains tightly zoomed with alignment guides and the wall geometry highlighted.","intent":"Refine alignment between the wall geometry and the underlying floor-plan image.","app":"Autodesk Revit","details":"The Align contextual ribbon is visible and the operation remains active at the end."},{"start_s":2334.183,"end_s":2344.658,"action":"Cancel the active alignment attempts, select the Basic Wall W2, and drag its wall end or segment while panning across the Dress and master-bedroom area; leave the wall selected with temporary dimensions visible.","intent":"Adjust the selected wall geometry to match the floor-plan layout.","app":"Autodesk Revit","details":"The selected wall is highlighted cyan and the Properties panel identifies Basic Wall W2."},{"start_s":2344.658,"end_s":2354.291,"action":"Scrolled and clicked within the Revit floor-plan view, then switched to the {3D} view; the window briefly hid, resized, and returned with the 3D model displayed.","intent":"Inspect the project in 3D after navigating the floor plan.","app":"Autodesk Revit","details":"The 3D view shows the building’s interior walls and doors."},{"start_s":2354.291,"end_s":2366.432,"action":"Navigated within the 3D model using middle-button clicks and scrolling, then selected the GL view tab to return to the floor plan.","intent":"Review the model and return to the GL floor plan.","app":"Autodesk Revit","details":"The GL plan displays the furnished dining, bedroom, living, and adjacent areas."},{"start_s":2366.432,"end_s":2373.211,"action":"Panned the GL floor plan downward with repeated middle-button clicks, bringing the bedroom and living-room portions into closer view.","intent":"Inspect the lower central rooms of the floor plan.","app":"Autodesk Revit","details":"The view centers on the M.BED ROOM and LIVING areas."},{"start_s":2373.211,"end_s":2383.71,"action":"Panned across the floor plan and scrolled to zoom in, shifting the view toward the dining, living, drawing, and kitchen areas.","intent":"Inspect the main living and dining spaces in greater detail.","app":"Autodesk Revit","details":"The final view is zoomed closely onto the dining table and nearby living-room furniture."},{"start_s":2383.71,"end_s":2399.444,"action":"Clicked and scrolled within the floor plan to zoom out and reposition the view, revealing most of the apartment layout including the drawing room, kitchen, utility, and balcony.","intent":"Review the broader apartment layout.","app":"Autodesk Revit","details":"The view transitions from a close dining-area inspection to a wider plan view."},{"start_s":2399.444,"end_s":2413.352,"action":"Scrolled and panned around the lower floor plan, then clicked the raster background image; the view repositioned to show the larger furnished plan and the raster image became selected.","intent":"Inspect and select the floor-plan background image.","app":"Autodesk Revit","details":"The selected raster image shows a furnished 3BHK 1882 Sqft plan with bedrooms, toilets, dining, drawing, living, kitchen, and lobby."},{"start_s":2413.352,"end_s":2428.988,"action":"Opened the Revit GL floor plan, navigated the raster-image view by scrolling and panning, and initiated the Load Autodesk Family command.","intent":"Inspect the floor plan and load a window family.","app":"Autodesk Revit","details":"The view was zoomed into the bedroom and living-room area before the family browser opened."},{"start_s":2428.988,"end_s":2444.154,"action":"Browsed the Load Autodesk Family dialog, selected the Windows category, and reviewed available window family thumbnails.","intent":"Choose a suitable window family for insertion.","app":"Autodesk Revit","details":"The dialog showed 62 Windows results with one window family selected."},{"start_s":2444.154,"end_s":2456.72,"action":"Downloaded the selected window family, returned to the floor plan, and adjusted the view while entering placement/scale operations.","intent":"Prepare the downloaded window family for placement in the plan.","app":"Autodesk Revit","details":"The family download reached 100%, and the plan ended in a close-up view with Modify | Scale active."},{"start_s":2456.72,"end_s":2461.22,"action":"Opened Type Properties for the Windows_Dbl_Plain family, chose Duplicate, and began renaming the 910x910mm type.","intent":"Create a separately named window type.","app":"Autodesk Revit","details":"A Name dialog was open for the duplicated type."},{"start_s":2461.22,"end_s":2467.657,"action":"Entered the new type name 4' and confirmed it, then edited the Width parameter from 2.986' to 4.000'.","intent":"Define the duplicated window type at the desired width.","app":"Autodesk Revit","details":"Type Properties showed the duplicated type named 4' and Width set to 4.000'."},{"start_s":2467.657,"end_s":2480.148,"action":"Returned to the plan with the 4' Windows_Dbl_Plain type active, positioned the window over the wall opening, and clicked to place it.","intent":"Place the resized window in the floor plan.","app":"Autodesk Revit","details":"The close-up showed the window inserted in the wall opening with placement controls still active."},{"start_s":2480.148,"end_s":2497.473,"action":"Switched to Autodesk Revit, navigated between the GL floor plan and 3D view, and zoomed or panned around the model while selecting and adjusting view content.","intent":"Inspect the Revit model and floor-plan context.","app":"Autodesk Revit","details":"The GL plan shows a raster-image underlay; the 3D view shows brick walls and doors."},{"start_s":2497.473,"end_s":2509.905,"action":"Returned to the GL floor plan, navigated to the master bedroom area, and activated the window placement tool for a 4-foot window type.","intent":"Place or configure a window in the floor plan.","app":"Autodesk Revit","details":"The view is centered on the M.BED ROOM, and the ribbon shows Modify | Place Window."},{"start_s":2509.905,"end_s":2518.364,"action":"Opened Type Properties for the Windows_Dbl_Plain family, renamed or set the window type to 2.5 feet, and confirmed the dialogs.","intent":"Create or configure a smaller window type before placement.","app":"Autodesk Revit","details":"Type Properties shows Windows_Dbl_Plain with type 2.5'."},{"start_s":2518.364,"end_s":2527.995,"action":"Returned to window placement, clicked in the master-bedroom plan, and zoomed or panned around the selected 2.5-foot window location.","intent":"Position the configured window in the floor plan.","app":"Autodesk Revit","details":"The 2.5' window remains active in Modify | Place Window mode."},{"start_s":2527.995,"end_s":2538.066,"action":"Continued navigating the floor plan, moved from the master-bedroom area toward the master toilet, and switched into the Scale tool while adjusting the view.","intent":"Inspect or adjust the raster-backed floor-plan layout.","app":"Autodesk Revit","details":"The plan view shows M.TOILET and later BED ROOM-1; the Scale tool is active at the end."},{"start_s":2538.066,"end_s":2554.147,"action":"Navigated and zoomed around BED ROOM-1, clicking near the room and window areas while remaining in window placement mode.","intent":"Continue positioning or inspecting windows in the floor plan.","app":"Autodesk Revit","details":"The final view is a zoomed floor-plan region with a horizontal window above the bedroom."},{"start_s":2554.147,"end_s":2565.79,"action":"Opened the window type properties, renamed or selected the Windows_Dbl_Plain type as 5', edited a dimension value to 5', and confirmed the dialog to return to the floor plan.","intent":"Configure a 5-foot window type and apply the updated dimension.","app":"Autodesk Revit","details":"Type Properties showed family Windows_Dbl_Plain and type 5'; the edited dimension field displayed 2.500' in the evidence view."},{"start_s":2565.79,"end_s":2583.035,"action":"Exited the type properties and continued placing the 5' window on the GL floor plan, navigating the view and adjusting the placement preview before reopening Type Properties.","intent":"Place the configured window in the floor plan.","app":"Autodesk Revit","details":"The floor plan showed the selected 5' window preview along a wall; Type Properties was reopened near the end of the span."},{"start_s":2583.035,"end_s":2589.64,"action":"Opened Type Properties, changed the Windows_Dbl_Plain type to 2', edited a dimension value to 2', and applied the changes before returning to the floor plan.","intent":"Configure and apply a 2-foot window type.","app":"Autodesk Revit","details":"Type Properties showed type 2' with rough width and width set to 2.000'."},{"start_s":2589.64,"end_s":2599.677,"action":"Closed the properties dialog, returned to the GL floor plan, and switched to the 3D view while navigating the model with zoom or pan inputs.","intent":"Review the updated window in plan and 3D views.","app":"Autodesk Revit","details":"The 3D view displayed the building model after the view switch."},{"start_s":2599.677,"end_s":2604.985,"action":"Navigated the 3D view, switched back to the GL floor plan, and zoomed or panned outward to show the surrounding bedrooms and bathrooms.","intent":"Inspect the window placement in the floor plan context.","app":"Autodesk Revit","details":"The resulting plan view showed BED ROOM-1, BED ROOM-2, TOILET-1, and TOILET-2."},{"start_s":2604.985,"end_s":2624.836,"action":"Navigated the GL floor plan, switched briefly to the 3D view and back, then activated window placement with the 2' Windows_Dbl_Plain type selected and positioned the preview over the plan.","intent":"Continue placing the 2-foot window on the floor plan.","app":"Autodesk Revit","details":"The final view showed Modify | Place Window with Windows_Dbl_Plain 2' selected and the placement cursor over the plan."},{"start_s":2624.836,"end_s":2629.258,"action":"Switched to Revit, opened Type Properties for the window family, chose Rename, and entered `2'` as the new type name.","intent":"Rename the window type.","app":"Autodesk Revit","details":"The Rename dialog displayed the existing type name selected."},{"start_s":2629.258,"end_s":2637.144,"action":"Confirmed the `2'` type name, reviewed the updated Type Properties values, and clicked to accept the dialog and return toward the floor plan.","intent":"Create and apply the renamed window type.","app":"Autodesk Revit","details":"Type Properties showed type `2'`; subsequent clicks accepted the dialog."},{"start_s":2637.144,"end_s":2655.443,"action":"Returned to the floor plan, zoomed and navigated around the upper bathroom window area, clicked to place or adjust the selected 2-foot window, then canceled the active placement operation.","intent":"Place or adjust the resized window in the floor plan.","app":"Autodesk Revit","details":"The status bar indicated window placement mode, and the view ended zoomed into the bathroom window."},{"start_s":2655.443,"end_s":2663.199,"action":"Opened the window type Rename dialog, entered `2.5'`, confirmed it, then entered the same value in the Type Properties dialog and accepted the changes.","intent":"Create a 2.5-foot window type and update its dimensions.","app":"Autodesk Revit","details":"Type Properties ended showing type `2.5'` with rough width and width updated to 2.500 feet."},{"start_s":2663.199,"end_s":2673.015,"action":"Returned to the floor plan, navigated and zoomed around the bathroom, then switched to the 3D view and selected a window on the brick exterior wall.","intent":"Inspect the updated window in plan and 3D views.","app":"Autodesk Revit","details":"The 3D view showed the selected blue-highlighted window on the exterior wall."},{"start_s":2673.015,"end_s":2690.008,"action":"Edited the selected window dimension, entered and revised values ending with `5'`, navigated the 3D view, then switched back to the GL floor plan and zoomed out to review the layout.","intent":"Adjust the window size and review its placement across views.","app":"Autodesk Revit","details":"The final floor plan showed the bathroom and bedroom area with the updated window visible."},{"start_s":2690.008,"end_s":2699.853,"action":"Switched to Autodesk Revit, adjusted the floor-plan view around Bedroom-2, and changed the active window type selection from 2.5' toward a larger size while zooming in.","intent":"Prepare and size a window instance in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; window placement/scale tools were active."},{"start_s":2699.853,"end_s":2712.521,"action":"Opened Type Properties for the Windows_Dbl_Plain family, renamed or selected a 6' type, and edited the visible width-related dimension to 6.000'.","intent":"Create or configure a 6-foot double window type.","app":"Autodesk Revit","details":"Type Properties shows Windows_Dbl_Plain type 6' with Rough Width and Width set to 6.000'."},{"start_s":2712.521,"end_s":2722.267,"action":"Returned to the floor plan, scrolled and dragged the view around Bedroom-2, and repositioned or inspected the selected window near the upper wall.","intent":"Place or adjust the configured window in the bedroom plan.","app":"Autodesk Revit","details":"Selected Windows_Dbl_Plain 6' instance remained in Place Window mode."},{"start_s":2722.267,"end_s":2736.568,"action":"Navigated across the floor plan toward the balcony and adjacent rooms, canceled and re-entered placement interactions, and opened the window type controls again.","intent":"Move to another wall location and prepare another window configuration.","app":"Autodesk Revit","details":"View ended near the wide balcony and adjacent bathroom; Type Properties was reopened at the boundary."},{"start_s":2736.568,"end_s":2744.665,"action":"Opened Type Properties, created or selected an 8' Windows_Dbl_Plain type, and set its width-related dimension to 8.000'.","intent":"Create or configure an 8-foot double window type.","app":"Autodesk Revit","details":"Type Properties shows Windows_Dbl_Plain type 8' with Rough Width and Width set to 8.000'."},{"start_s":2744.665,"end_s":2763.13,"action":"Returned to the floor plan, navigated around the balcony and adjacent bathroom, and positioned the 8' window preview along the wall while remaining in Place Window mode.","intent":"Place or adjust the newly configured 8-foot window in the floor plan.","app":"Autodesk Revit","details":"Selected Windows_Dbl_Plain 8' instance and placement preview were visible."},{"start_s":2763.13,"end_s":2773.523,"action":"Activated Revit's Place Window tool and clicked within the floor plan near the upper window area, leaving the window placement preview active while adjusting the view and window size.","intent":"Place or position a window in the GL floor plan.","app":"Autodesk Revit","details":"Window type Windows_Dbl_Plain 4' was active; the span ended after additional view and window resizing interactions."},{"start_s":2773.523,"end_s":2783.103,"action":"Exited the prior placement interaction, navigated to another portion of the GL floor plan, and reactivated Place Window to position a window along a vertical wall beside the living area.","intent":"Continue placing a window in the floor plan.","app":"Autodesk Revit","details":"The view shifted from the upper window area to a vertical wall beside furniture; window placement remained active at the end."},{"start_s":2783.103,"end_s":2793.298,"action":"Navigated around the floor plan, switched to the 3D view, and rotated or adjusted the model to inspect the building walls and openings.","intent":"Review the model in 3D after working in the floor plan.","app":"Autodesk Revit","details":"The title changed to Project1 - 3D View: {3D}; the final view showed an angled partial wall model."},{"start_s":2793.298,"end_s":2803.45,"action":"Rotated, zoomed, and panned the 3D model, inspecting exterior walls, a door, and a window opening from multiple angles.","intent":"Inspect the modeled wall and opening geometry in 3D.","app":"Autodesk Revit","details":"The view progressed from an angled interior wall view to a side elevation-like view showing a door and window."},{"start_s":2803.45,"end_s":2813.37,"action":"Continued navigating the 3D model, then switched back to the GL floor plan and adjusted the plan view around the lobby and drawing-room area.","intent":"Return to the floor plan for continued review.","app":"Autodesk Revit","details":"The title changed back to Project1 - Floor Plan: GL; the final screenshot showed the furnished plan with room labels and raster underlay."},{"start_s":2813.37,"end_s":2817.822,"action":"Switched briefly to the 3D view, adjusted the view, and returned to the GL floor plan, leaving the plan zoomed around the lobby and adjacent rooms.","intent":"Compare the 3D model with the floor plan and resume plan review.","app":"Autodesk Revit","details":"The span ended on the GL floor plan after a brief 3D-view inspection."},{"start_s":2817.822,"end_s":2837.822,"action":"Remained idle while viewing the GL floor plan showing the lobby, drawing room, and bedroom areas.","intent":"Review the current floor plan.","app":"Autodesk Revit","details":null},{"start_s":2837.822,"end_s":2843.064,"action":"Pressed Escape and switched ribbon context, then clicked the Load Autodesk Family control to open the family browser.","intent":"Open the family browser to add Revit content.","app":"Autodesk Revit","details":null},{"start_s":2843.064,"end_s":2854.147,"action":"Waited for the Load Autodesk Family browser to appear, then clicked within the browser to navigate its content.","intent":"Browse available families.","app":"Autodesk Revit","details":"The browser initially displayed Windows family results."},{"start_s":2854.147,"end_s":2867.475,"action":"Scrolled through the Load Autodesk Family browser until Door family results were displayed.","intent":"Browse door families for possible loading.","app":"Autodesk Revit","details":"The browser showed multiple door thumbnails and Door categories."},{"start_s":2867.475,"end_s":2876.502,"action":"Continued scrolling through the Door family results to review additional door and door-hardware options.","intent":"Inspect available door families.","app":"Autodesk Revit","details":"Door panels, garage doors, handles, knobs, and related families were visible."},{"start_s":2876.502,"end_s":2887.746,"action":"Scrolled further, selected a door family, and clicked Load; Revit switched back to the project while displaying a Downloading Families dialog at 61%.","intent":"Load the selected door family into the project.","app":"Autodesk Revit","details":"Family download was in progress when the span ended."},{"start_s":2887.746,"end_s":2903.535,"action":"Adjusted the Revit floor-plan view around the selected raster image and wall, then exited the prior operation and activated Place Door with the 910x210mm door type.","intent":"Prepare a door instance for placement in the floor plan.","app":"Autodesk Revit","details":"The view shows the GL floor plan with the door placement tool active."},{"start_s":2903.535,"end_s":2916.947,"action":"Opened the door Type Properties, duplicated the door type, entered the name 3.5', and reviewed the type parameters by scrolling before confirming the dialogs.","intent":"Create and configure a 3.5-foot door type.","app":"Autodesk Revit","details":"The duplicated type is shown as 3.5' with dimensional parameters visible."},{"start_s":2916.947,"end_s":2926.696,"action":"Returned to the GL floor plan, zoomed or panned to show the lobby and adjacent rooms, briefly interacted with the placement view, and pressed Escape to cancel the active operation.","intent":"Review the proposed door location and leave placement mode.","app":"Autodesk Revit","details":"The 3.5' door tool remains visible during the review, with no confirmed placement shown."},{"start_s":2926.696,"end_s":2939.742,"action":"Switched to the 3D view, navigated around the modeled walls and doors with middle-button view controls, then returned to the GL floor plan.","intent":"Inspect the model in 3D and return to the working plan.","app":"Autodesk Revit","details":"The 3D view shows the building walls and door openings from changing viewpoints."},{"start_s":2939.742,"end_s":2949.86,"action":"Browsed the GL floor plan with repeated middle-button panning and scrolling, moving from the lobby and bedrooms toward the living and kitchen areas.","intent":"Navigate across the floor plan to inspect other rooms.","app":"Autodesk Revit","details":"The plan view visibly shifts across labeled rooms including bedrooms, living, and kitchen."},{"start_s":2949.86,"end_s":2960.529,"action":"Continued panning and zooming across the floor plan, then activated the wall tool and positioned the view over the kitchen and wide utility area ready to draw a wall.","intent":"Prepare to place or extend a wall in the utility area.","app":"Autodesk Revit","details":"The final view shows Modify | Place Wall with Basic Wall W3 selected and the prompt to click to enter the wall start point."},{"start_s":2960.529,"end_s":2966.702,"action":"Opened the Basic Wall Type Properties, chose Rename, and entered “W4” in the name dialog.","intent":"Rename the wall type.","app":"Autodesk Revit","details":"The dialog remained open after entering W4."},{"start_s":2966.702,"end_s":2971.277,"action":"Attempted to rename the wall type, received a warning that “W4” was already in use, then selected the name field and entered “W5.”","intent":"Choose an unused wall type name after the duplicate-name warning.","app":"Autodesk Revit","details":"The rename dialog was still visible at the end of the span."},{"start_s":2971.277,"end_s":2977.489,"action":"Closed the rename prompt, opened Edit Assembly for Basic Wall W5, changed the layer thickness to 0.75 feet, confirmed the assembly and type properties, and returned to the floor plan.","intent":"Set the W5 wall assembly thickness and apply the updated wall type.","app":"Autodesk Revit","details":"Type Properties showed W5 with width 0.750."},{"start_s":2977.489,"end_s":2987.504,"action":"Navigated from the floor plan to the 3D view, using view manipulation and scrolling, and left wall placement mode to inspect the model.","intent":"Inspect the updated wall in 3D.","app":"Autodesk Revit","details":"The 3D view displayed the brick-walled building."},{"start_s":2987.504,"end_s":2997.958,"action":"Rotated and zoomed the 3D model, selected a long exterior wall, resized the Revit window, and entered “-5’” in a visible field.","intent":"Adjust the 3D view and modify a selected wall parameter.","app":"Autodesk Revit","details":"The selected exterior wall was highlighted in cyan."},{"start_s":2997.958,"end_s":3008.212,"action":"Selected the wall, edited its top offset to -6 feet, and rotated the 3D view to inspect the resulting wall geometry.","intent":"Lower the selected wall and verify the change in 3D.","app":"Autodesk Revit","details":"The wall properties showed Top Offset -6.471 feet after the edit."},{"start_s":3008.212,"end_s":3018.309,"action":"Navigated and zoomed/panned the Revit GL floor plan, bringing the living room, kitchen, utility area, and balcony into view.","intent":"Inspect the floor-plan layout at different zoom levels.","app":"Autodesk Revit","details":null},{"start_s":3018.309,"end_s":3030.693,"action":"Continued panning and zooming the GL floor plan until the balcony filled the central view.","intent":"Examine the balcony area and surrounding plan details.","app":"Autodesk Revit","details":null},{"start_s":3030.693,"end_s":3040.704,"action":"Panned and zoomed from the balcony toward the toilet and shaft area, then selected the raster image underlay.","intent":"Inspect the upper bathroom and shaft portion of the floor plan.","app":"Autodesk Revit","details":"The raster image became selected, showing Modify | Raster Images controls."},{"start_s":3040.704,"end_s":3045.081,"action":"Exited the raster-image selection, typed commands including WA, and activated Place Wall mode.","intent":"Prepare to add a wall in the floor plan.","app":"Autodesk Revit","details":"The wall tool was active with Basic Wall type W5 and the prompt to click an enter wall start point."},{"start_s":3045.081,"end_s":3052.022,"action":"Changed the wall type to W3, zoomed into the shaft and ODU area, and positioned the wall-placement cursor without completing a wall.","intent":"Set wall parameters and position a new wall near the shaft.","app":"Autodesk Revit","details":"Place Wall mode remained active; the view showed the ODU and shaft labels."},{"start_s":3052.022,"end_s":3061.811,"action":"Changed the wall type to W2, clicked near the shaft/ODU area, previewed a vertical wall segment, then canceled wall placement and panned the view rightward.","intent":"Test wall placement near the shaft and adjust the plan view.","app":"Autodesk Revit","details":"The wall preview showed a vertical constraint before Escape canceled the active placement."},{"start_s":3061.811,"end_s":3072.001,"action":"Completed the active wall-placement interaction, exited transient commands with Escape, and zoomed out to reveal the broader GL floor plan.","intent":"Review the floor plan after placing or adjusting a wall.","app":"Autodesk Revit","details":"The view changed from a close-up wall/door area to a wider residential floor-plan view."},{"start_s":3072.001,"end_s":3084.169,"action":"Zoomed and panned around the GL floor plan, moving from the bedroom and toilet area to a wider view containing multiple apartment layouts and the lobby.","intent":"Inspect the overall floor-plan arrangement.","app":"Autodesk Revit","details":"Visible rooms included bedrooms, toilets, pooja, dining, drawing, kitchen, lobby, and stair areas."},{"start_s":3084.169,"end_s":3093.737,"action":"Continued panning across the zoomed-out GL plan to reposition the view over the adjacent apartment and central lobby areas.","intent":"Review neighboring plan layouts.","app":"Autodesk Revit","details":"The view remained a broad comparison of two residential plan layouts."},{"start_s":3093.737,"end_s":3103.82,"action":"Scrolled and panned toward the right side of the plan, inspecting the lobby, stair, lift, corridor, and surrounding apartment rooms before zooming back to a broader composition.","intent":"Inspect circulation and shared building areas.","app":"Autodesk Revit","details":"The final view showed multiple apartment blocks with the central lobby and stair/lift core."},{"start_s":3103.82,"end_s":3113.837,"action":"Zoomed into the left apartment, clicked through the plan, typed “WA,” and entered wall-placement mode while positioning the view around the master bedroom, kitchen, toilet, and utility areas.","intent":"Begin or prepare a wall placement in the apartment plan.","app":"Autodesk Revit","details":"Revit displayed Modify | Place Wall with Basic Wall W2 selected and prompted for a wall start point."},{"start_s":3113.837,"end_s":3123.251,"action":"Panned and zoomed across the kitchen, utility, corridor, and drawing room while wall placement remained active; clicked to position the wall and pressed Escape to stop the command.","intent":"Position and then end the wall-placement operation.","app":"Autodesk Revit","details":"The final view showed the drawing room and kitchen boundary with a temporary wall-placement guide and dimension."},{"start_s":3123.251,"end_s":3140.895,"action":"Scrolled and clicked around the Revit floor plan, then activated the wall placement tool and positioned the view near Bedroom-2 and the drawing area.","intent":"Navigate the floor plan and begin placing a wall.","app":"Autodesk Revit","details":"The view ended in Modify | Place Wall mode with Basic Wall W2 selected."},{"start_s":3140.895,"end_s":3145.859,"action":"Switched back to Revit, changed the active wall type from W2 to W3, clicked in the plan, and pressed Escape to stop the current placement sequence.","intent":"Select a different wall type for floor-plan editing.","app":"Autodesk Revit","details":"Basic Wall W3 was shown in the Properties panel."},{"start_s":3145.859,"end_s":3150.45,"action":"Selected another wall type, clicked in the drawing area, pressed Escape, and reopened the wall-type list.","intent":"Choose and prepare another wall type for placement.","app":"Autodesk Revit","details":"The wall-type dropdown was open with W5 selected and types including W2, W3, W4, and WALL 1 visible."},{"start_s":3150.45,"end_s":3155.482,"action":"Selected WALL 1 from the wall-type list, clicked and dragged in the plan, then reopened the type list.","intent":"Use the WALL 1 type while continuing wall placement.","app":"Autodesk Revit","details":"The Properties panel showed Basic Wall WALL 1 before the type list was reopened."},{"start_s":3155.482,"end_s":3166.469,"action":"Exited the active placement states, selected geometry in the plan, and entered a scale-related editing state before opening Type Properties.","intent":"Inspect or modify the selected wall type.","app":"Autodesk Revit","details":"The view briefly showed Modify | Scale, then ended with the Type Properties command being opened."},{"start_s":3166.469,"end_s":3175.281,"action":"Opened the Basic Wall Type Properties dialog, reviewed the available wall types, and returned to the parameter table for the selected type.","intent":"Review wall-type parameters and construction settings.","app":"Autodesk Revit","details":"The dialog showed System Family: Basic Wall and parameters including width, function, structural material, and analytical properties."},{"start_s":3175.281,"end_s":3185.069,"action":"Navigated around the GL floor plan with repeated middle-clicks and scrolls while the Place Wall tool remained active, then pressed Escape as the Revit window briefly changed visibility.","intent":"Inspect the floor plan and position the active wall-placement view.","app":"Autodesk Revit","details":"The view moved from a close-up wall area to a furnished plan region."},{"start_s":3185.069,"end_s":3191.784,"action":"Selected a wall, panned and scrolled across the plan, and pressed Escape to leave the active interaction.","intent":"Inspect the selected wall and surrounding floor-plan geometry.","app":"Autodesk Revit","details":"A turquoise wall selection was visible across the bedroom and drawing-room area."},{"start_s":3191.784,"end_s":3211.784,"action":"Remained inactive while displaying a zoomed-out GL floor plan.","intent":"Review the overall floor-plan layout.","app":"Autodesk Revit","details":"The visible plan showed bedrooms, toilets, lobby, dining, drawing, and lift areas."},{"start_s":3211.784,"end_s":3225.793,"action":"Scrolled and panned the floor plan to center the bedrooms, toilets, and drawing area, with brief middle-click navigation.","intent":"Reposition the view for closer inspection of the residential layout.","app":"Autodesk Revit","details":"The view settled on Bedroom 1, Bedroom 2, Toilet-1, Toilet-2, Pooja, dining, and drawing spaces."},{"start_s":3225.793,"end_s":3235.875,"action":"Zoomed further into the bedroom and toilet area, entered wall placement with keyboard input, and navigated around the central toilet and Pooja spaces.","intent":"Inspect and prepare to place or adjust a wall in the interior plan.","app":"Autodesk Revit","details":"The active Place Wall tool was visible; the final view showed Toilet-1, Toilet-2, and Pooja with a wall-start cursor state."},{"start_s":3235.875,"end_s":3247.76,"action":"Panned and scrolled through the interior plan, selected a vertical wall between the toilets, and moved the view down toward the Pooja area while keeping the wall selected.","intent":"Inspect or adjust the selected partition wall.","app":"Autodesk Revit","details":"The selected wall was highlighted cyan, and the final view showed it beside the Pooja room."},{"start_s":3247.76,"end_s":3253.021,"action":"Switched to Autodesk Revit, scrolled and clicked through the wall-type list, changing the highlighted wall type from W2 to W5 while keeping the GL floor plan visible.","intent":"Select a different wall type for the active wall context.","app":"Autodesk Revit","details":"The Properties panel showed Basic Wall W5 at the end of the span."},{"start_s":3253.021,"end_s":3263.055,"action":"Clicked through wall types including W3 and W2, then scrolled and panned the GL floor plan around the highlighted wall and adjacent rooms; resized or repositioned the Revit window near the end.","intent":"Review wall types and inspect the wall location in the floor plan.","app":"Autodesk Revit","details":"The wall-type dropdown was visible early in the span, and the selected wall remained highlighted in cyan."},{"start_s":3263.055,"end_s":3273.711,"action":"Scrolled and panned across the floor plan, then entered Place Wall mode with Basic Wall W2 selected and positioned a wall preview near the toilet and bedroom area before pressing Escape.","intent":"Begin positioning a wall segment in the floor plan.","app":"Autodesk Revit","details":"The options bar showed wall placement settings including Finish Face: Exterior, FFL height, and Chain enabled."},{"start_s":3273.711,"end_s":3283.851,"action":"Exited and re-entered wall placement while panning and zooming across the bedroom, toilet, and pooja areas; positioned the wall preview along the plan and clicked to continue placement.","intent":"Continue laying out a wall segment along the room boundary.","app":"Autodesk Revit","details":"The view moved from the toilet area to a broader bedroom and pooja view, with the wall preview visible."},{"start_s":3283.851,"end_s":3293.979,"action":"Panned and scrolled around the bedroom and doorway, positioned the Basic Wall W2 preview along the corridor edge, and clicked near the wall endpoint before pressing Escape.","intent":"Adjust and terminate the wall placement near the doorway.","app":"Autodesk Revit","details":"Temporary dimensions and wall-placement graphics were visible, including measurements near the doorway and corridor."},{"start_s":3293.979,"end_s":3307.049,"action":"Exited the current wall placement, zoomed out to review the overall GL floor plan, then zoomed back toward the upper apartment and reactivated Place Wall with Basic Wall W2 selected.","intent":"Review the overall layout and prepare for another wall placement.","app":"Autodesk Revit","details":"The final view centered on the 3BHK apartment with bedrooms, toilets, pooja, dining, and drawing areas visible; the status bar indicated a wall start point."},{"start_s":3307.049,"end_s":3320.848,"action":"Switched to Autodesk Revit, navigated the GL floor plan with scrolling and clicks, and left wall placement active while the view changed to a different plan area.","intent":"Navigate the floor plan and position the view for wall work.","app":"Autodesk Revit","details":"The view shows the GL floor plan with Basic Wall W5 selected and the Place Wall command active."},{"start_s":3320.848,"end_s":3326.907,"action":"Opened the wall-type selector, reviewed the listed Basic Wall types, and pressed Escape without a visible type change.","intent":"Review available wall types before continuing placement.","app":"Autodesk Revit","details":"The selector lists W2, W3, W4, W5, WALL 1, and other wall types."},{"start_s":3326.907,"end_s":3340.694,"action":"Pressed Escape to exit the active wall-placement state, scrolled and middle-clicked to zoom or pan from a close-up to a broader GL floor-plan view.","intent":"Cancel the current command and inspect a wider portion of the plan.","app":"Autodesk Revit","details":"The broader view shows the 3BHK layout, bedrooms, dining, kitchen, lobby, lifts, and stairs."},{"start_s":3340.694,"end_s":3348.687,"action":"Scrolled and clicked around the GL plan near the bedrooms, exhaust shaft, lift lobby, and corridor, then pressed Escape while Basic Wall W3 remained selected for placement.","intent":"Navigate to and inspect the corridor and lift area for wall work.","app":"Autodesk Revit","details":"The view ends focused on the corridor beside the STP Exhaust Shaft and lifts."},{"start_s":3348.687,"end_s":3358.939,"action":"Scrolled and clicked around the corridor opening, then selected a wall; Revit entered Modify | Walls and highlighted the wall segment with temporary dimensions.","intent":"Select and inspect the wall segment near the corridor opening.","app":"Autodesk Revit","details":"Basic Wall W2 is selected, with a visible length dimension of about 6.908 feet."},{"start_s":3358.939,"end_s":3364.231,"action":"Scrolled slightly and opened the wall-type selector while keeping the wall selected.","intent":"Review wall types for the selected wall.","app":"Autodesk Revit","details":"The Basic Wall list is open with W2 highlighted and the selected wall still visible in the plan."},{"start_s":3364.231,"end_s":3369.887,"action":"Opened Autodesk Revit on the GL floor plan, exited the active wall-edit state, and navigated the view with scrolling and middle-click panning. Began a wall-related command by typing “WA,” then clicked the left-side controls.","intent":"Prepare and navigate the GL floor plan for wall placement or editing.","app":"Autodesk Revit","details":"The view remained centered on the floor plan near a selected horizontal wall and adjacent rooms."},{"start_s":3369.887,"end_s":3380.031,"action":"Activated Place Wall, opened the Basic Wall type list, and selected wall types while panning and zooming across the lobby and lift area. Started wall placement near a lift, then pressed Escape to cancel or exit the command.","intent":"Choose a wall type and position a wall in the lift/lobby area.","app":"Autodesk Revit","details":"The wall type list showed W2, W3, W4, W5, and WALL 1; the active type later displayed as W4."},{"start_s":3380.031,"end_s":3390.565,"action":"Continued in Place Wall with type W4, panned across the lift bank and stair area, and clicked along wall endpoints and edges to adjust or extend the wall path. Scrolled to reposition the floor-plan view.","intent":"Lay out or adjust wall segments around the lifts and stair area.","app":"Autodesk Revit","details":"Temporary dimensions and wall-extension indicators appeared while the view moved across the lift entrances and stair."},{"start_s":3390.565,"end_s":3403.485,"action":"Clicked near the lift wall, pressed Escape, and continued navigating the plan while the wall command remained available. Resized or repositioned the Revit window, then clicked the wall type area and returned to a wider view of the lobby and four lifts.","intent":"Stop the current wall placement attempt and review the surrounding layout.","app":"Autodesk Revit","details":"The final view showed the lobby, corridor, stairs, and four lift shafts with W4 still shown in the wall controls."},{"start_s":3403.485,"end_s":3414.583,"action":"Opened and scrolled the Basic Wall type list, reviewing available types including W2, W3, W4, W5, and WALL 1. Left the wall placement tool active without placing a clearly visible new segment.","intent":"Review and potentially choose a different wall type before continuing placement.","app":"Autodesk Revit","details":"The type list remained open over the GL floor plan, with W4 highlighted in the evidence."},{"start_s":3414.583,"end_s":3421.163,"action":"Scrolled and panned to a close-up between the lift shafts, clicked along the wall edges, and pressed Escape twice to exit the active wall command. Returned to the normal GL floor-plan state.","intent":"Inspect the lift wall alignment and finish the wall-placement operation.","app":"Autodesk Revit","details":"The final view showed a close-up of lift enclosures and their projecting wall bases; no definite new wall segment was visible."},{"start_s":3421.163,"end_s":3426.991,"action":"Switched to Revit, activated Place Wall with the WA shortcut, opened the wall type list, and selected Basic Wall: W2 while viewing the lift area.","intent":"Prepare a wall placement using a selected wall type.","app":"Autodesk Revit","details":"Floor Plan: GL; wall type list showed Basic Wall options."},{"start_s":3426.991,"end_s":3436.783,"action":"Panned and zoomed across the lift and lobby area, selected Basic Wall: W5, and began positioning a wall segment along the lobby edge with a temporary horizontal dimension visible.","intent":"Position a wall segment in the floor plan.","app":"Autodesk Revit","details":"Wall placement mode remained active; temporary dimension displayed approximately 11' 2 50\"."},{"start_s":3436.783,"end_s":3453.192,"action":"Exited the active wall interaction, zoomed and panned to a wider view of the lift bank and stair area, then re-entered wall placement with Basic Wall: W5 selected.","intent":"Navigate the plan and prepare another wall placement.","app":"Autodesk Revit","details":"The view shifted from the lobby edge to the lift and stair region."},{"start_s":3453.192,"end_s":3459.412,"action":"Scrolled to reposition the view, opened the wall type list, and selected Basic Wall: WALL 1 while remaining in Place Wall mode.","intent":"Choose a different wall type for placement.","app":"Autodesk Revit","details":"Wall type list was visible over the lift and stair area."},{"start_s":3459.412,"end_s":3467.796,"action":"Switched back into Revit wall placement, opened the wall type list, and selected or retained Basic Wall: W5 while viewing the lift bank.","intent":"Prepare the next wall placement with the W5 type.","app":"Autodesk Revit","details":"No completed wall segment is visibly confirmed during this span."},{"start_s":3467.796,"end_s":3477.76,"action":"Selected Basic Wall: W4, positioned a vertical wall preview between lift bays, then canceled the active placement and returned to the normal floor-plan view.","intent":"Try positioning a wall between the lift bays and then end the placement.","app":"Autodesk Revit","details":"A vertical placement guide and orientation cue were visible before cancellation."},{"start_s":3477.76,"end_s":3494.245,"action":"Navigated and zoomed within the Revit GL floor plan, selected a wall between elevator openings, and ended with the wall selected.","intent":"Inspect or modify the wall element in the floor plan.","app":"Autodesk Revit","details":"Selected Basic Wall type W4; the view shows elevator openings over a raster image."},{"start_s":3494.245,"end_s":3502.277,"action":"Opened the wall type selector, reviewed available Basic Wall types, and changed the selected wall from W4 to W5.","intent":"Assign a different wall type to the selected wall.","app":"Autodesk Revit","details":"The selected wall is displayed as Basic Wall: W5."},{"start_s":3502.277,"end_s":3506.707,"action":"Opened Type Properties for wall type W5, chose Rename, and entered W6 in the name dialog.","intent":"Rename the wall type before editing its properties.","app":"Autodesk Revit","details":"The rename dialog shows W6 entered, with the Type Properties window behind it."},{"start_s":3506.707,"end_s":3514.779,"action":"Confirmed the rename and opened Edit Assembly for wall type W6, edited a layer thickness value, and returned to Type Properties showing W6.","intent":"Adjust the construction of the renamed wall type.","app":"Autodesk Revit","details":"Edit Assembly shows Basic Wall W6 with total thickness 0.750 inches; Type Properties shows width 0.800."},{"start_s":3514.779,"end_s":3528.701,"action":"Returned to the floor plan, activated Place Wall, and navigated the view around the elevator openings while preparing to place a wall.","intent":"Continue modeling wall geometry in the floor plan.","app":"Autodesk Revit","details":"Place Wall mode is active with Basic Wall W4 selected and the status prompt to enter a wall end point."},{"start_s":3528.701,"end_s":3539.034,"action":"Selected the wall between the elevator openings, adjusted the view with zooming and panning, and then cleared the selection to return to the floor plan view.","intent":"Inspect the newly modeled wall and its placement relative to the elevator openings.","app":"Autodesk Revit","details":"The selected wall is Basic Wall W6; the final view shows the elevator openings without an active element selection."},{"start_s":3539.034,"end_s":3548.704,"action":"Exited and re-entered Revit commands, typed partial dimension input, and activated the Place Dimensions tool while viewing the lift plan area.","intent":"Prepare to place a dimension in the floor plan.","app":"Autodesk Revit","details":"Dimension placement mode is active at the end of the span."},{"start_s":3548.704,"end_s":3557.599,"action":"Canceled dimension placement, selected wall geometry near the lift area, and left a wall selected in the floor plan.","intent":"Inspect or select wall references around the lift openings.","app":"Autodesk Revit","details":"A wall is selected at the end of the span."},{"start_s":3557.599,"end_s":3567.709,"action":"Re-entered dimension placement, picked references around the right side of the lift area, and selected a wall while entering a dimension value.","intent":"Create or adjust a dimension associated with the lift-area wall.","app":"Autodesk Revit","details":"A temporary dimension input of 7.479 is visible."},{"start_s":3567.709,"end_s":3580.876,"action":"Entered 7.6 feet for the dimension, exited the command, and navigated the floor plan by panning or zooming across the row of lift openings.","intent":"Set the wall or opening dimension and review the surrounding plan.","app":"Autodesk Revit","details":"The view ends focused on multiple lift openings with a wall selected."},{"start_s":3580.876,"end_s":3585.426,"action":"Opened the wall type selector and changed the selected wall from W6 to W2.","intent":"Change the type of the selected wall.","app":"Autodesk Revit","details":"The wall type dropdown is open briefly and W2 is shown selected at the end."},{"start_s":3585.426,"end_s":3592.163,"action":"Opened the wall type selector again, reviewed available types, and changed the selected wall from W4 to W5.","intent":"Adjust the selected wall type around the lift area.","app":"Autodesk Revit","details":"The final selected wall is Basic Wall W5."},{"start_s":3592.163,"end_s":3596.796,"action":"Switched to Revit, kept a wall selected in the GL floor plan, and opened the wall-type selector showing Basic Wall options.","intent":"Choose a different wall type for the selected wall.","app":"Autodesk Revit","details":"The view remained zoomed on the lift area; the selector displayed types including W2 through W6 and WALL 1."},{"start_s":3596.796,"end_s":3609.904,"action":"Closed the wall-type list and changed the selected wall type to W6, then interacted with the floor-plan view and opened the wall Type Properties dialog.","intent":"Inspect or modify the selected wall type.","app":"Autodesk Revit","details":"The selected wall properties showed Basic Wall W6 before the Type Properties dialog was opened."},{"start_s":3609.904,"end_s":3620.656,"action":"Renamed the wall type to W7, opened Edit Assembly, entered a layer thickness value of 0.75', and confirmed dialogs to return to Type Properties.","intent":"Create or adjust the W7 wall assembly.","app":"Autodesk Revit","details":"Edit Assembly showed Basic Wall W7 with a Brick, Common layer and a 1.000' thickness before the entered value."},{"start_s":3620.656,"end_s":3633.828,"action":"Returned to the GL floor plan, activated Place Wall with Basic Wall W7, navigated around the lift area, and positioned wall placement geometry near the opening.","intent":"Place the modified W7 wall in the floor plan.","app":"Autodesk Revit","details":"The wall placement tool remained active with chain enabled and the view zoomed around the lift walls."},{"start_s":3633.828,"end_s":3643.966,"action":"Cancelled wall placement and selected the existing wall near the lift, then entered Temporary Hide/Isolate mode while reviewing the isolated plan view.","intent":"Inspect the wall and surrounding geometry in isolation.","app":"Autodesk Revit","details":"The isolated view displayed a red Temporary Hide/Isolate border and the selected W7 wall."},{"start_s":3643.966,"end_s":3656.28,"action":"Navigated and zoomed within the isolated GL floor plan, entered brief keyboard input, and reopened Type Properties for the selected W7 wall.","intent":"Continue reviewing or editing the selected W7 wall type.","app":"Autodesk Revit","details":"The final view showed the selected cyan-highlighted wall beside the lift area, with Type Properties opened at the end."},{"start_s":3656.28,"end_s":3663.249,"action":"Edited the Basic Wall W7 assembly, entered a 0.73-inch layer thickness, confirmed the assembly, and opened Type Properties.","intent":"Adjust the wall type's layer thickness.","app":"Autodesk Revit","details":"Edit Assembly shows Brick, Common at 0.73 thickness; Type Properties shows Width 0.730."},{"start_s":3663.249,"end_s":3679.43,"action":"Closed the type properties, reviewed the GL floor plan, navigated and zoomed around the lobby and stair area, then activated Place Wall for Basic Wall W7.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The view ends in wall placement mode with Basic Wall W7 selected."},{"start_s":3679.43,"end_s":3689.674,"action":"Opened the wall type selector, selected Basic Wall W4, and navigated across the lobby and stair area while remaining in Place Wall mode.","intent":"Choose a different wall type and position the view for wall placement.","app":"Autodesk Revit","details":"The type selector visibly lists wall types W2 through W7 and WALL 1; W4 is shown as the active type afterward."},{"start_s":3689.674,"end_s":3700.1,"action":"Continued panning and zooming around the stair and Good's Lift area, selected the wall geometry, and reviewed its displayed length and placement.","intent":"Inspect or position the selected wall near the stair and elevator area.","app":"Autodesk Revit","details":"Basic Wall W4 is selected; the visible dimension is approximately 26.917 feet."},{"start_s":3700.1,"end_s":3710.37,"action":"Navigated along the selected wall near the stair and elevator, panned and zoomed, and left the wall highlighted for continued editing.","intent":"Inspect the wall alignment and extent in the floor plan.","app":"Autodesk Revit","details":"The selected wall remains highlighted in cyan and is shown spanning toward the Good's Lift."},{"start_s":3710.37,"end_s":3728.1,"action":"Zoomed out to review the broader GL floor plan, then zoomed back into the lobby and elevator area and positioned the cursor to begin wall placement.","intent":"Locate and prepare the next wall segment in the floor plan.","app":"Autodesk Revit","details":"The final status prompt reads “Click to enter wall start point,” with Basic Wall W4 active."},{"start_s":3728.1,"end_s":3732.395,"action":"Activated Revit's wall placement tool, adjusted the view, clicked in the plan, and canceled the active placement command.","intent":"Prepare or position a wall in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; Basic Wall W5 was active."},{"start_s":3732.395,"end_s":3737.648,"action":"Opened the wall-type selector, reviewed the listed Basic Wall types, selected a different wall type, clicked in the plan, and canceled placement.","intent":"Choose a wall type for placement.","app":"Autodesk Revit","details":"The selected wall type changed from W5 to W6."},{"start_s":3737.648,"end_s":3747.269,"action":"Opened the wall-type list, selected W7, panned the floor plan with middle-button clicks, and created or adjusted a horizontal wall segment across the opening.","intent":"Place or align a wall segment in the floor plan.","app":"Autodesk Revit","details":"A temporary dimension of 5.917 was visible while the wall geometry was being positioned."},{"start_s":3747.269,"end_s":3762.956,"action":"Navigated and zoomed the floor plan, briefly entered Scale mode, then returned to wall placement and adjusted the view around the furnished area.","intent":"Inspect and reposition the plan view for further modeling.","app":"Autodesk Revit","details":"The view shifted from the opening to a close-up of a wood-floored furnished area."},{"start_s":3762.956,"end_s":3767.919,"action":"Opened the wall-type selector, reviewed wall types, selected W5, and canceled the active placement command after a brief drag near the plan edge.","intent":"Switch the wall type and prepare for another wall placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained zoomed in on the furnished area."},{"start_s":3767.919,"end_s":3779.104,"action":"Opened the wall-type selector, reviewed the Basic Wall options, then selected the raster image in the plan and displayed its raster-image properties.","intent":"Select and inspect the underlay image.","app":"Autodesk Revit","details":"The selected raster image showed width and height 187.754 and horizontal and vertical scales of 27.036506."},{"start_s":3779.104,"end_s":3783.843,"action":"Opened the wall Type Properties type selector and browsed the available wall types.","intent":"Inspect or choose a different wall type.","app":"Autodesk Revit","details":"The Type Properties dialog showed System Family: Basic Wall with type W2 and an expanded list of wall types."},{"start_s":3783.843,"end_s":3793.944,"action":"Entered W8 in the Name dialog, confirmed it, selected wall type W8, opened the wall assembly editor, entered 0.7', and confirmed the edit.","intent":"Create or modify the W8 wall type and adjust an assembly value.","app":"Autodesk Revit","details":"The Type Properties dialog ended with type W8 selected; intermediate dialogs included Name and Edit Assembly."},{"start_s":3793.944,"end_s":3804.165,"action":"Returned to the floor plan, zoomed and panned across the drawing, and continued placing a Basic Wall W8 with the wall tool active.","intent":"Position the view and place or align a wall segment in the floor plan.","app":"Autodesk Revit","details":"The plan view showed the Place Wall mode with Basic Wall W8 and Finish Face: Exterior."},{"start_s":3804.165,"end_s":3814.258,"action":"Panned and zoomed through the floor plan while keeping the wall placement tool active, moving from the living and dining area toward the bedrooms and toilet.","intent":"Navigate the plan to locate the next wall placement area.","app":"Autodesk Revit","details":"Visible plan regions included DRAWING, DINING, M.BED ROOM, BED ROOM-1, LIVING, and TOILET-1."},{"start_s":3814.258,"end_s":3824.205,"action":"Continued navigating the plan, exited or canceled the active placement interaction, then selected a wall and adjusted the view until a wall segment was selected.","intent":"Review the plan and select a wall for further modification.","app":"Autodesk Revit","details":"The view changed from a broader raster-backed floor plan to a selected Basic Wall W8 with wall modification controls visible."},{"start_s":3824.205,"end_s":3834.107,"action":"Panned and zoomed around the selected wall near the master toilet and shaft, typed wall-related input, and continued repositioning the view with the wall tool active.","intent":"Inspect or modify wall geometry near the toilet and shaft area.","app":"Autodesk Revit","details":"The final view was closely zoomed on the M. TOILET and Shaft area, with Basic Wall W8 and Finish Face: Exterior shown in Properties."},{"start_s":3834.107,"end_s":3844.122,"action":"Clicked and scrolled within the Revit floor plan, then navigated to a close-up area while the wall placement tool remained active.","intent":"Inspect the floor plan and position the view for wall placement.","app":"Autodesk Revit","details":"Floor Plan: GL; Basic Wall W8 was active."},{"start_s":3844.122,"end_s":3863.187,"action":"Scrolled and clicked through the floor plan, selected a wall, and moved the view across the close-up wall area before returning to wall placement mode.","intent":"Inspect and select wall geometry for modification or placement.","app":"Autodesk Revit","details":"A wall was visibly selected during the interval; the view changed substantially through zooming or panning."},{"start_s":3863.187,"end_s":3873.241,"action":"Switched back to the Revit window, clicked and dragged in the plan, and began positioning a wall segment near the right-side wall intersection before selecting wall geometry.","intent":"Place or adjust a wall segment in the floor plan.","app":"Autodesk Revit","details":"Basic Wall W4 was active during wall placement; a wall became selected near the end."},{"start_s":3873.241,"end_s":3890.218,"action":"Exited the active placement interaction, clicked the wall area, and left a wall selected while the view remained focused on the close-up plan region; later pressed Escape and resized or repositioned the window.","intent":"Review the positioned wall and exit the current editing state.","app":"Autodesk Revit","details":"The selected element was identified as Basic Wall W4; the final screenshot showed the wall unselected in the floor plan."},{"start_s":3890.218,"end_s":3897.348,"action":"Clicked and adjusted the selected wall area, entered the Scale tool, then exited it and returned to wall placement mode after additional window resizing.","intent":"Attempt a scale or view adjustment while continuing wall editing.","app":"Autodesk Revit","details":"The ribbon showed Modify | Scale briefly, then Modify | Place Wall with Basic Wall W4 active."},{"start_s":3897.348,"end_s":3902.636,"action":"Activated the wall type selector, opened the list of wall types, and selected Basic Wall W5 before returning to the floor plan with wall placement active.","intent":"Choose a different wall type for the next placement.","app":"Autodesk Revit","details":"The wall type dropdown visibly listed W4, W5, W6, W7, W8, and other types; W5 was active at the end."},{"start_s":3902.636,"end_s":3912.523,"action":"Activated Revit's wall placement tool, selected wall types from the type list, navigated the floor plan around Bedroom-2 and the dining area, and pressed Escape to cancel or exit the active operation.","intent":"Prepare or adjust a wall placement operation in the floor plan.","app":"Autodesk Revit","details":"Basic Wall types W5 and W2 were visible; the view was zoomed and panned before the operation was canceled."},{"start_s":3912.523,"end_s":3922.537,"action":"Zoomed and panned across the GL floor plan, selected a wall or room-separation element, and entered wall modification mode; the view ended focused on the corridor and POOJA area with the wall highlighted.","intent":"Inspect and modify a wall segment in the floor plan.","app":"Autodesk Revit","details":"The selected element was shown as a wall with Modify | Walls active."},{"start_s":3922.537,"end_s":3932.787,"action":"Typed a short search or command string, clicked around the selected wall, pressed Escape several times, and dragged across the plan to adjust or inspect the wall segment near POOJA and the dining area.","intent":"Refine or inspect the selected wall geometry.","app":"Autodesk Revit","details":"The wall remained selected and the view became tightly zoomed on its horizontal extent."},{"start_s":3932.787,"end_s":3946.109,"action":"Continued zooming and panning around the dining room, balcony, and kitchen edge, used wall placement interactions, and typed a short command or search string before returning to the wall placement view.","intent":"Position and continue wall layout work around the balcony and dining area.","app":"Autodesk Revit","details":"The final view showed the balcony corner with Basic Wall W2 active and the status prompting for a wall start point."},{"start_s":3946.109,"end_s":3958.595,"action":"Switched back into the Revit floor plan, zoomed and panned from the balcony toward the dining and Bedroom-2 boundary, selected wall type W5, and initiated wall placement before pressing Escape.","intent":"Place or adjust a wall near the balcony and dining area.","app":"Autodesk Revit","details":"The view ended near the dining-area wall and adjacent furniture with W5 selected."},{"start_s":3958.595,"end_s":3975.757,"action":"Switched between Revit windows or views, selected wall types from the wall list, zoomed and panned around the balcony and kitchen boundary, and canceled the active operation with Escape while leaving the plan focused on the balcony corner.","intent":"Inspect wall types and refine wall placement near the balcony and kitchen.","app":"Autodesk Revit","details":"The wall type list showed W5, W6, W7, W8, and WALL 1; the final view displayed the balcony, kitchen edge, and adjacent wall geometry."},{"start_s":3975.757,"end_s":3993.013,"action":"Switched to Autodesk Revit and kept a wall selected in the GL floor plan; panned the view slightly and pressed Escape to end the active interaction.","intent":"Inspect the selected wall and its placement in the floor plan.","app":"Autodesk Revit","details":"Selected Basic Wall W8 is visible over the kitchen/balcony area."},{"start_s":3993.013,"end_s":4007.828,"action":"Scrolled and entered wall placement mode, previewing a vertical wall segment beside the kitchen and utility area; pressed Escape and selected the resulting wall for inspection.","intent":"Place or adjust a wall along the right side of the kitchen and utility area.","app":"Autodesk Revit","details":"The selected wall is shown as Basic Wall W5 with temporary dimensions."},{"start_s":4007.828,"end_s":4018.804,"action":"Exited the active command, scrolled out to review the wall in the broader kitchen and utility layout, and clicked near the wall endpoint while keeping the wall selected.","intent":"Review the wall’s extent and alignment in context.","app":"Autodesk Revit","details":"The view expands to show the kitchen, balcony, and 5' wide utility area."},{"start_s":4018.804,"end_s":4028.687,"action":"Panned and zoomed around the selected wall near the kitchen and utility boundary, then pressed Escape and clicked away to deselect it.","intent":"Inspect the wall connection and finish the review.","app":"Autodesk Revit","details":"The final view shows the utility room area with no element selected."},{"start_s":4028.687,"end_s":4038.882,"action":"Selected the wall again and dragged or adjusted it near the utility room edge, then entered wall placement mode and zoomed out to the surrounding kitchen layout.","intent":"Continue positioning the wall along the utility-room perimeter.","app":"Autodesk Revit","details":"Basic Wall W8 is selected, and the later placement mode shows Basic Wall W5."},{"start_s":4038.882,"end_s":4058.107,"action":"Scrolled and zoomed across the kitchen and utility plan, then used wall placement mode to start another wall segment along the interior boundary near the sink and utility room.","intent":"Place or align an additional wall segment in the kitchen and utility area.","app":"Autodesk Revit","details":"The wall tool remains active with Basic Wall W3 selected; the final view is zoomed near the utility-room doorway and sink."},{"start_s":4058.107,"end_s":4064.425,"action":"Activated Revit and browsed the floor plan with repeated zoom or scroll gestures. Selected different wall types in the wall placement interface, zoomed toward the kitchen and fridge area, then pressed Escape to cancel the active command.","intent":"Inspect the floor plan and cycle through wall types near the kitchen.","app":"Autodesk Revit","details":"Floor Plan: GL; wall placement mode was active."},{"start_s":4064.425,"end_s":4068.635,"action":"Changed the active wall type from W8 to W5, zoomed further into the fridge area, clicked near the wall, and pressed Escape without visibly placing a wall.","intent":"Review or prepare a wall type at the kitchen wall location.","app":"Autodesk Revit","details":"The view remained tightly zoomed on the fridge and adjacent wall."},{"start_s":4068.635,"end_s":4073.169,"action":"Selected wall type W6, clicked near the upper edge of the fridge enclosure, pressed Escape, and continued browsing the wall-type list.","intent":"Compare wall types and inspect the wall location around the fridge.","app":"Autodesk Revit","details":"No completed wall placement was visibly confirmed."},{"start_s":4073.169,"end_s":4083.243,"action":"Opened the wall-type list, selected W6 and then W2, zoomed and panned across the kitchen and utility area, and pressed Escape while the interface briefly moved and resized.","intent":"Choose a wall type and navigate the plan to inspect nearby wall geometry.","app":"Autodesk Revit","details":"The view moved from the fridge toward the sink, bathroom, and utility-room walls."},{"start_s":4083.243,"end_s":4092.565,"action":"Panned and zoomed around the plan, selected a wall segment near the fridge, dragged its endpoint or geometry, and then zoomed back out to the broader floor plan.","intent":"Modify or inspect the selected wall segment and its placement in the floor plan.","app":"Autodesk Revit","details":"A wall was visibly selected and highlighted cyan during the drag."},{"start_s":4092.565,"end_s":4101.453,"action":"Zoomed out substantially to review a larger portion of the Floor Plan: GL, bringing multiple rooms and the central lobby into view.","intent":"Review the overall floor-plan layout after the wall inspection.","app":"Autodesk Revit","details":"No interaction beyond zooming was recorded."},{"start_s":4101.453,"end_s":4109.857,"action":"Scrolled through the GL floor plan and zoomed into the apartment layout, then middle-clicked within the drawing view.","intent":"Inspect a detailed area of the floor plan.","app":"Autodesk Revit","details":"The view changed from the full sheet to a close-up showing bedrooms, dining, kitchen, and toilets."},{"start_s":4109.857,"end_s":4122.742,"action":"Middle-clicked and panned across the GL floor plan, shifting the view downward and across adjacent apartment units.","intent":"Review different portions of the floor plan.","app":"Autodesk Revit","details":"The view moved across labeled rooms including drawing, dining, bedrooms, kitchen, utility, and balconies."},{"start_s":4122.742,"end_s":4132.884,"action":"Panned and scrolled repeatedly across the floor plan, moving between apartment units and corridor areas while inspecting room layouts.","intent":"Continue navigating and reviewing the floor plan.","app":"Autodesk Revit","details":"The view ended on a close-up of a dining room, kitchen, master bedroom, toilet, utility area, and wide corridor."},{"start_s":4132.884,"end_s":4143.306,"action":"Scrolled and panned to a close-up of the plan, selected the wall-placement tool, and began positioning a wall near the drawing and bedroom area; typed WA and then pressed Escape.","intent":"Start and then exit wall placement while examining a wall location.","app":"Autodesk Revit","details":"Revit displayed Modify | Place Wall with Basic Wall W2 and a wall preview/placement crosshair."},{"start_s":4143.306,"end_s":4163.145,"action":"Continued navigating the close-up plan, repeatedly entering and exiting wall-related interactions, and selected or positioned wall geometry near the master toilet and adjacent rooms.","intent":"Inspect or adjust wall geometry in the floor plan.","app":"Autodesk Revit","details":"The view remained highly zoomed; wall-placement mode was visible and the plan was panned around the toilet and furniture."},{"start_s":4163.145,"end_s":4167.561,"action":"Scrolled slightly and opened the wall type selector for the selected wall, browsing available types such as W3, W4, W5, W6, W7, and W8.","intent":"Review or choose a wall type for the selected wall.","app":"Autodesk Revit","details":"The Properties panel showed Basic Wall W3, and the wall-type dropdown list was open."},{"start_s":4167.561,"end_s":4174.619,"action":"Switched to Autodesk Revit, selected a wall, opened the wall type list, and changed the selected wall type from W7 to W2 while viewing the GL floor plan.","intent":"Adjust the selected wall type in the floor plan.","app":"Autodesk Revit","details":"The wall type dropdown and selected wall properties are visible."},{"start_s":4174.619,"end_s":4185.079,"action":"Scrolled and zoomed out in the GL floor plan to review a wider area around the toilet, utility, shaft, and adjacent rooms.","intent":"Review the surrounding floor-plan context.","app":"Autodesk Revit","details":"The view ends showing the M. Toilet, utility area, shaft, and fixtures."},{"start_s":4185.079,"end_s":4196.482,"action":"Entered wall placement with wall type W2, moved to the right side of the shaft area, and zoomed in while positioning the wall endpoint; then canceled the active operation.","intent":"Position or inspect a new wall segment near the shaft.","app":"Autodesk Revit","details":"The Modify | Place Wall ribbon and wall placement controls are visible."},{"start_s":4196.482,"end_s":4206.782,"action":"Exited the close-up wall operation, zoomed out and panned across the GL floor plan, and reviewed the broader bedroom, toilet, dining, kitchen, and utility layout.","intent":"Inspect wall placement in relation to the overall plan.","app":"Autodesk Revit","details":"The view transitions from a close-up shaft area to a broad residential floor-plan view."},{"start_s":4206.782,"end_s":4216.755,"action":"Zoomed and panned to the Toilet-2 and adjacent bedroom area, positioned a wall endpoint along the right side of the room, and left the wall placement tool active.","intent":"Place or align a wall beside Toilet-2.","app":"Autodesk Revit","details":"The selected wall is shown beside the toilet and bedroom imagery."},{"start_s":4216.755,"end_s":4228.667,"action":"Switched back to the active Revit window, changed the wall type from W2 to W8, and adjusted the view around the selected wall beside the toilet and bedroom.","intent":"Update the wall type and inspect the resulting wall segment.","app":"Autodesk Revit","details":"The Properties panel shows Basic Wall W8 and the selected wall is highlighted in cyan."},{"start_s":4228.667,"end_s":4232.811,"action":"Switched to Autodesk Revit and opened the wall-type dropdown, leaving a selected wall visible in the GL floor plan.","intent":"Review or change the selected wall type.","app":"Autodesk Revit","details":"Wall type list was opened with Basic Wall W2 shown."},{"start_s":4232.811,"end_s":4237.681,"action":"Selected different entries in the wall-type dropdown, moving through Basic Wall types and ending with W7 selected in the properties panel.","intent":"Choose a wall type for the selected wall.","app":"Autodesk Revit","details":"The selected wall remained highlighted in the GL floor plan."},{"start_s":4237.681,"end_s":4248.125,"action":"Opened the wall-type list again, made several keyboard selections and cancellations, then navigated the floor plan with middle-button panning and selected the wall tool context.","intent":"Adjust wall selection or prepare wall placement.","app":"Autodesk Revit","details":"The wall-type list briefly showed W2 through W8; no definite type change was confirmed."},{"start_s":4248.125,"end_s":4258.421,"action":"Panned and zoomed the floor plan, entered wall placement mode, typed into the wall command, cancelled and restarted the command, and clicked near the wall by the toilet rooms.","intent":"Position the view and begin placing or modifying a wall.","app":"Autodesk Revit","details":"The view moved from the small room area to the labeled TOILET-1 and TOILET-2 area; wall placement controls were visible."},{"start_s":4258.421,"end_s":4267.765,"action":"Continued navigating the floor plan with middle-button clicks and zooming, then selected wall geometry near the toilet rooms and moved the view upward along the corridor wall.","intent":"Inspect or select adjacent wall segments.","app":"Autodesk Revit","details":"The selected wall changed from W2 to W8, and the highlighted geometry shifted across the plan."},{"start_s":4267.765,"end_s":4280.474,"action":"Zoomed and panned back to the small room, typed wall-command shortcuts, then clicked and dragged to start a wall placement operation.","intent":"Begin placing a wall segment in the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Wall mode with Basic Wall W2, and the status bar indicated clicking to enter the wall start point."},{"start_s":4280.474,"end_s":4299.882,"action":"Switched to Autodesk Revit, navigated the GL floor plan with clicks and view adjustments, and left the Place Wall tool active while the plan view changed from a close-up to the toilet area.","intent":"Position the floor plan and prepare or continue wall placement.","app":"Autodesk Revit","details":"Basic Wall W3 was active; the view shows Toilet-1 and Toilet-2."},{"start_s":4299.882,"end_s":4307.048,"action":"Returned to Autodesk Revit, adjusted the view, selected the wall placement point near Toilet-1, and zoomed in on the room.","intent":"Begin placing or align a wall in the Toilet-1 area.","app":"Autodesk Revit","details":"Basic Wall W8 was active and the status indicated a wall start point."},{"start_s":4307.048,"end_s":4323.667,"action":"Opened the wall type list, selected or reviewed wall types, clicked and dragged in the floor plan, and panned or zoomed toward the lower room boundary.","intent":"Choose a wall type and position a wall segment in the plan.","app":"Autodesk Revit","details":"The wall type list was visible with Basic Wall and partition types; the view ended near a selected wall endpoint."},{"start_s":4323.667,"end_s":4333.986,"action":"Adjusted the view and selected a wall near Toilet-1; opened the wall type list and changed the active selection while continuing to inspect the plan.","intent":"Review and modify the wall element or its type near the toilet area.","app":"Autodesk Revit","details":"A wall was highlighted in cyan and the active type changed from WALL 1 to WALL 2."},{"start_s":4333.986,"end_s":4344.235,"action":"Exited the active wall interaction, zoomed and panned out to review the broader GL floor plan, and typed “WA” while the application briefly resized or hid windows.","intent":"Review the overall floor plan and possibly invoke a wall-related command.","app":"Autodesk Revit","details":"The view expanded to show the drawing, dining, kitchen, bedroom, utility, and toilet areas."},{"start_s":4344.235,"end_s":4354.39,"action":"Zoomed and panned across the floor plan, selected wall geometry near the utility and toilet area, and left a wall segment highlighted in cyan.","intent":"Inspect or adjust wall geometry in the selected area.","app":"Autodesk Revit","details":"The final view is a close-up of a selected wall at the utility/toilet boundary."},{"start_s":4354.39,"end_s":4364.561,"action":"Selected and adjusted a wall segment in the GL floor plan, switching its type from WALL 1 to W8 and repositioning it near the plan edge.","intent":"Modify the selected wall element and its placement.","app":"Autodesk Revit","details":"Wall properties and Modify | Walls tools were visible."},{"start_s":4364.561,"end_s":4374.836,"action":"Exited the prior wall edit, selected another wall segment, dragged it in the GL plan, and entered -6 followed by an angle-like value in the temporary input before confirming.","intent":"Position and dimension the wall segment precisely.","app":"Autodesk Revit","details":"The selected wall remained highlighted while temporary dimensions were edited."},{"start_s":4374.836,"end_s":4390.261,"action":"Switched from the GL floor plan to the {3D} view, then zoomed and navigated around the modeled building walls for inspection.","intent":"Review the wall modifications in three dimensions.","app":"Autodesk Revit","details":"The 3D view showed the building layout, then a more zoomed-out model after navigation."},{"start_s":4390.261,"end_s":4399.811,"action":"Returned to the GL floor plan and zoomed or panned across the architectural underlay, moving from a close utility-area view to a broader plan view.","intent":"Inspect the floor-plan context and compare the modeled layout with the underlay.","app":"Autodesk Revit","details":"The plan displayed room labels, furnishings, and raster underlay imagery."},{"start_s":4399.811,"end_s":4411.777,"action":"Panned and zoomed across multiple apartment floor-plan areas, including bedrooms, kitchens, utilities, and lobbies, then resized or rearranged the Revit window near the end.","intent":"Review different portions of the floor plan.","app":"Autodesk Revit","details":"The view showed multiple apartment layouts and area labels such as 3BHK."},{"start_s":4411.777,"end_s":4422.346,"action":"Activated Place Wall, selected wall type W3 from the type list, and began drawing a horizontal wall segment across the bathroom and adjacent room area, leaving the wall placement tool active.","intent":"Add a new W3 wall segment to the GL floor plan.","app":"Autodesk Revit","details":"The final view showed a temporary wall preview and a 1.917-inch dimension while Place Wall remained active."},{"start_s":4422.346,"end_s":4436.917,"action":"Navigated and zoomed around the GL floor plan, selected wall-related areas, and activated the Place Wall tool near the pool and adjacent rooms.","intent":"Prepare to inspect or modify walls in the floor plan.","app":"Autodesk Revit","details":"The view changed from a broad furnished plan to a close-up near the pool; wall placement mode was active at the end."},{"start_s":4436.917,"end_s":4447.584,"action":"Opened the wall-type selector, reviewed available Basic Wall types, zoomed and panned around the pool and doorway area, and positioned the wall-placement cursor.","intent":"Choose a wall type and position a new wall segment.","app":"Autodesk Revit","details":"Basic Wall W3 was selected in the type list, and the close-up showed a temporary wall-placement preview with dimensions."},{"start_s":4447.584,"end_s":4457.51,"action":"Zoomed out and panned across the furnished GL plan, selected a wall near the master bedroom and utility/toilet area, and continued wall placement toward the lower shaft area.","intent":"Inspect and modify wall geometry in the lower portion of the floor plan.","app":"Autodesk Revit","details":"A wall was highlighted near the master bedroom; the view ended in a close-up of the shaft and adjacent toilets with wall placement still active."},{"start_s":4457.51,"end_s":4466.817,"action":"Canceled the prior wall operation, selected another wall near the shaft, entered wall placement, and adjusted the view around the shaft and master toilet.","intent":"Create or position a wall segment along the shaft boundary.","app":"Autodesk Revit","details":"Basic Wall W2 was selected; a vertical wall preview and temporary dimensions were visible before the view shifted upward."},{"start_s":4466.817,"end_s":4472.498,"action":"Selected and adjusted the horizontal wall along the bottom of the shaft, then exited the active wall-editing operation.","intent":"Modify the shaft boundary wall alignment or extent.","app":"Autodesk Revit","details":"The horizontal wall was highlighted with temporary dimensions, including an approximately 7.167-foot span."},{"start_s":4472.498,"end_s":4486.83,"action":"Zoomed and panned out across the GL floor plan from the master-bedroom area to the central lobby, reviewing the furnished layout and elevator cores.","intent":"Review the broader floor-plan layout after wall edits.","app":"Autodesk Revit","details":"The final view showed the central lobby, multiple lifts, stairs, kitchen, dining, and surrounding rooms."},{"start_s":4486.83,"end_s":4495.974,"action":"Panned and scrolled through the GL floor plan, moving from the central lobby and elevator area toward adjacent apartment layouts.","intent":"Inspect different portions of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":4495.974,"end_s":4505.546,"action":"Continued panning and zooming across the GL floor plan, focusing on a 3BHK unit and its bedrooms, dining area, kitchen, utility, and toilet spaces.","intent":"Review apartment layout details.","app":"Autodesk Revit","details":null},{"start_s":4505.546,"end_s":4515.572,"action":"Scrolled and entered wall-placement mode, then positioned the view over the bedroom, toilet, shaft, and utility area while typing short input.","intent":"Prepare to place or adjust a wall in the floor plan.","app":"Autodesk Revit","details":"The Modify | Place Wall tool was active, with Basic Wall W8 shown in Properties."},{"start_s":4515.572,"end_s":4525.254,"action":"Continued in wall-placement mode, panned and zoomed around the toilet, shaft, utility, and refrigerator area, and briefly selected or adjusted geometry before cancelling or changing the active operation.","intent":"Refine wall placement or inspect alignment near the utility area.","app":"Autodesk Revit","details":"The view ended zoomed tightly on the refrigerator and adjacent wall."},{"start_s":4525.254,"end_s":4535.194,"action":"Dragged and navigated across the floor plan, then zoomed out to review multiple apartment units and the shared lobby and lift areas.","intent":"Inspect the broader relationship between apartment layouts and common areas.","app":"Autodesk Revit","details":null},{"start_s":4535.194,"end_s":4545.162,"action":"Scrolled to the kitchen and utility area, selected a wall, and then returned to wall-placement mode while panning toward the refrigerator, sink, and cooking counter.","intent":"Inspect or modify the wall separating the kitchen and utility spaces.","app":"Autodesk Revit","details":"A wall was highlighted in cyan before the view moved to a close-up of the kitchen fixtures."},{"start_s":4545.162,"end_s":4554.496,"action":"Clicked and scrolled around the floor plan while placing or adjusting a wall, then selected a wall segment near the bedroom area.","intent":"Inspect and modify the wall layout in the GL floor plan.","app":"Autodesk Revit","details":"The view moved from the bedroom area to a selected vertical wall segment."},{"start_s":4554.496,"end_s":4563.471,"action":"Scrolled and clicked through the floor plan, zooming out from Toilet-2 to a broader apartment layout and leaving the wall selection inactive.","intent":"Review the floor-plan context around the selected wall.","app":"Autodesk Revit","details":"The view ended on a wider GL floor plan showing multiple rooms, including Toilet-2."},{"start_s":4563.471,"end_s":4581.428,"action":"Entered keyboard text and navigated the plan around the utility area; clicked wall geometry and changed the active tool, ending with the inner wall segment selected.","intent":"Continue editing wall geometry in the utility area.","app":"Autodesk Revit","details":"The utility room and dish-washer area remained in view; the final state showed Delete Inner Segment active."},{"start_s":4581.428,"end_s":4590.944,"action":"Exited the prior tool, selected the utility-area wall, entered an offset value of -6 feet, and switched the view to the 3D view.","intent":"Adjust the selected wall's constraint and inspect the model in 3D.","app":"Autodesk Revit","details":"The selected wall showed Top Offset -6.000 in the Properties panel before the 3D view opened."},{"start_s":4590.944,"end_s":4601.16,"action":"Reviewed the 3D wall model with scrolling, then returned to the GL floor plan and navigated around the utility and adjacent rooms.","intent":"Verify the wall modification and return to the plan for further inspection.","app":"Autodesk Revit","details":"The 3D view showed the building's wall layout; the final view returned to the utility area in the floor plan."},{"start_s":4601.16,"end_s":4611.313,"action":"Scrolled and clicked across the floor plan, zooming and panning to a broader apartment view, then activated wall placement and changed the wall type to Basic Wall W2.","intent":"Continue laying out or editing walls in the floor plan.","app":"Autodesk Revit","details":"The final view centered on the living, dining, kitchen, bedroom, and utility areas with Place Wall active."},{"start_s":4611.313,"end_s":4622.092,"action":"Navigated and zoomed around the GL floor plan, clicking near the dining/toilet area and leaving a wall-placement context active.","intent":"Inspect or position a wall element in the floor plan.","app":"Autodesk Revit","details":"The view ended zoomed into the Toilet-2 and Nook area."},{"start_s":4622.092,"end_s":4634.7,"action":"Panned and zoomed across the GL floor plan, entered “WA,” and clicked to begin another wall placement near the dining and Toilet-2 area.","intent":"Activate the wall tool and prepare to place a wall.","app":"Autodesk Revit","details":"The wall placement prompt was visible at the end."},{"start_s":4634.7,"end_s":4644.786,"action":"Opened the wall type selector, reviewed wall types, selected Basic Wall: W3, and continued positioning the view around Toilet-2.","intent":"Choose a wall type for the active wall-placement operation.","app":"Autodesk Revit","details":"The Properties panel showed Basic Wall W3 after the selection."},{"start_s":4644.786,"end_s":4654.804,"action":"Zoomed and panned to the wall beside the shop/toilet area, typed shortcut keys, and selected the wall segment for modification.","intent":"Inspect and select a wall segment near the shop area.","app":"Autodesk Revit","details":"The selected wall was highlighted and the Modify | Walls tools were visible."},{"start_s":4654.804,"end_s":4664.907,"action":"Navigated around the selected wall and adjacent Shop and Toilet-2 elements, then exited the active edit state while continuing to inspect the plan.","intent":"Review the wall geometry and nearby room layout.","app":"Autodesk Revit","details":"The view ended focused on the raster floor-plan area near the shop fixture."},{"start_s":4664.907,"end_s":4674.789,"action":"Panned and zoomed around Toilet-2, entered a wall-editing command, and selected the vertical wall segment beside the shop.","intent":"Modify or inspect the selected wall segment.","app":"Autodesk Revit","details":"The final view showed the wall highlighted in cyan with wall modification controls active."},{"start_s":4674.789,"end_s":4684.882,"action":"Scrolled and clicked around the zoomed floor plan, then selected a wall near the bathroom area; pressed Escape to exit an active operation.","intent":"Inspect or modify a wall in the GL floor plan.","app":"Autodesk Revit","details":"A wall was selected by the end of the span."},{"start_s":4684.882,"end_s":4698.395,"action":"Scrolled and zoomed out to review the overall GL floor plan, then activated wall placement and clicked in the plan near the upper-right area.","intent":"Begin placing a wall in the floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up to the full apartment plan, and wall placement mode was active at the end."},{"start_s":4698.395,"end_s":4705.453,"action":"Selected wall type W5 and positioned the wall-placement cursor near the top-right exterior edge of the plan, showing a temporary length of about 2.083 feet; pressed Escape and reactivated wall placement.","intent":"Prepare a wall segment using the W5 wall type.","app":"Autodesk Revit","details":"No completed wall segment is visibly confirmed."},{"start_s":4705.453,"end_s":4710.319,"action":"Selected wall type W7 and positioned the wall-placement cursor along the same upper-right edge of the plan, then pressed Escape and returned to wall placement.","intent":"Continue preparing another wall segment with a different wall type.","app":"Autodesk Revit","details":"The wall tool remained active with W7 selected."},{"start_s":4710.319,"end_s":4729.319,"action":"Opened the wall-type dropdown, reviewed available types, then selected WALL 1 and clicked in the plan; subsequently selected a wall segment and displayed it highlighted in cyan.","intent":"Choose a wall type and inspect or place a wall in the floor plan.","app":"Autodesk Revit","details":"The final view showed a selected wall labeled WALL 1."},{"start_s":4729.319,"end_s":4734.883,"action":"Opened the wall-type dropdown, selected W2, and positioned the wall-placement cursor near an interior wall beside the bedroom; displayed temporary dimensions while preparing the next wall segment.","intent":"Prepare to place a W2 wall segment in the bedroom area.","app":"Autodesk Revit","details":"Wall placement remained active at the end, awaiting the next endpoint."},{"start_s":4734.883,"end_s":4739.739,"action":"Switched to Autodesk Revit and remained in the floor plan with the wall-placement tool active; pressed Escape.","intent":"Continue editing the floor plan and cancel the current wall-placement state.","app":"Autodesk Revit","details":"Floor Plan: GL was visible with the Basic Wall type list open."},{"start_s":4739.739,"end_s":4745.792,"action":"Exited the wall-placement state, selected the raster image, and activated the Scale tool; adjusted the view around the floor-plan image.","intent":"Scale or inspect the placed raster reference image.","app":"Autodesk Revit","details":"The Properties panel showed Raster Image selected, then the contextual Modify | Scale ribbon appeared."},{"start_s":4745.792,"end_s":4750.449,"action":"Returned to Place Wall mode and browsed the Basic Wall type list, leaving Basic Wall W2 selected.","intent":"Prepare to draw another wall using a selected wall type.","app":"Autodesk Revit","details":"The wall type dropdown was open over the GL floor plan."},{"start_s":4750.449,"end_s":4760.246,"action":"Selected Basic Wall W5 and drew a wall segment in the plan, using clicks and viewport navigation to position the segment near the living-room and bedroom boundary.","intent":"Add a wall segment aligned with the floor-plan reference.","app":"Autodesk Revit","details":"A temporary wall outline and dimensions were visible while Place Wall remained active."},{"start_s":4760.246,"end_s":4770.316,"action":"Continued navigating and zooming the floor plan, then pressed Escape to end the active wall operation and returned to the broader plan view.","intent":"Inspect the wall placement and exit the drawing operation.","app":"Autodesk Revit","details":"The view moved from a close-up wall junction to the living room, balcony, and Bedroom-2 area."},{"start_s":4770.316,"end_s":4786.601,"action":"Navigated around the living room and Bedroom-2 area, made additional clicks and view adjustments, then selected a wall for modification.","intent":"Inspect and select the newly modeled wall or an adjacent wall for further editing.","app":"Autodesk Revit","details":"The final view showed a wall selected in cyan with the Modify | Walls contextual tools visible."},{"start_s":4786.601,"end_s":4796.69,"action":"Selected and inspected wall elements in the GL floor plan, scrolling and panning around the raster-backed layout; pressed Escape to cancel transient selections or commands.","intent":"Review wall geometry and navigate the floor plan.","app":"Autodesk Revit","details":"The selected wall type changed from Basic Wall W5 to W2 while the view remained zoomed in."},{"start_s":4796.69,"end_s":4807.149,"action":"Dragged and adjusted the selected wall end while panning and zooming around the wall intersection; pressed Escape several times to exit transient interactions.","intent":"Adjust or inspect the wall endpoint and its alignment.","app":"Autodesk Revit","details":"Temporary dimensions appeared near the selected Basic Wall W2, including approximately 1.578 feet."},{"start_s":4807.149,"end_s":4827.149,"action":"Scrolled to zoom out and review the broader GL floor plan, bringing the living room, bedroom, dining area, and toilet into view.","intent":"Review the overall floor-plan layout after the wall adjustment.","app":"Autodesk Revit","details":"No further interaction occurred after the zoom-out."},{"start_s":4827.149,"end_s":4838.554,"action":"Scrolled farther out and panned to display most of the apartment plan, including the balcony, bedrooms, living, dining, kitchen, and toilets.","intent":"Inspect the overall apartment arrangement and drawing extent.","app":"Autodesk Revit","details":"The view showed the 3BHK 2001 Sft. plan label."},{"start_s":4838.554,"end_s":4851.98,"action":"Scrolled and panned back toward the balcony, living room, and adjacent bedroom, then repositioned the view near the upper-right portion of the plan.","intent":"Navigate to and inspect the balcony and neighboring room geometry.","app":"Autodesk Revit","details":"The view ended zoomed in on the balcony edge and bedroom area over the raster image."},{"start_s":4851.98,"end_s":4860.146,"action":"Activated the Place Wall tool with Basic Wall: WALL 1, entered wall-placement mode, and moved the view while positioning a prospective wall endpoint; typed C and S and continued panning without a visible completed wall.","intent":"Begin placing a new wall segment in the floor plan.","app":"Autodesk Revit","details":"The options bar showed wall placement controls including Chain, Offset 0.000, and Radius 1.000; no confirmed wall segment was completed."},{"start_s":4860.146,"end_s":4870.748,"action":"Exited the active wall interaction and repositioned the Revit window, leaving the selected horizontal wall visible in the GL floor plan.","intent":"Continue reviewing the selected wall and its placement.","app":"Autodesk Revit","details":"Basic Wall WALL 1 remained selected."},{"start_s":4870.748,"end_s":4883.592,"action":"Scrolled and middle-clicked to zoom out and reposition the GL floor plan, bringing the full balcony and adjacent rooms into view while keeping the horizontal wall selected.","intent":"Inspect the wall in relation to the surrounding floor-plan layout.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader balcony view."},{"start_s":4883.592,"end_s":4891.055,"action":"Exited wall modification mode and clicked the plan, leaving the GL floor plan unselected with the balcony and adjacent rooms visible.","intent":"Finish reviewing the current wall selection.","app":"Autodesk Revit","details":"The Properties panel switched from wall properties to Floor Plan properties."},{"start_s":4891.055,"end_s":4908.018,"action":"Activated Place Wall, browsed the Basic Wall type list, selected wall type W4, and zoomed into the upper-left side of the balcony to prepare a wall placement.","intent":"Choose a wall type and position the view for drawing a new wall.","app":"Autodesk Revit","details":"Place Wall mode was active with Basic Wall W4 selected at the end of the span."},{"start_s":4908.018,"end_s":4921.441,"action":"Opened the Basic Wall type list, selected W2, and navigated and zoomed to the bedroom area beside the balcony while remaining in Place Wall mode.","intent":"Change the wall type and prepare the next wall placement location.","app":"Autodesk Revit","details":"Basic Wall W2 was selected; no completed wall segment is clearly visible."},{"start_s":4921.441,"end_s":4930.4,"action":"Selected another wall type from the Basic Wall list, zoomed and panned across the bedroom and balcony boundary, and positioned the cursor to start drawing a wall.","intent":"Prepare a wall placement at the bedroom and balcony boundary.","app":"Autodesk Revit","details":"Place Wall mode remained active, with Basic Wall W2 shown at the end."},{"start_s":4930.4,"end_s":4949.204,"action":"Activated Autodesk Revit, selected a wall, and entered wall placement mode while navigating the GL floor plan.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The view remained zoomed into the plan near the living area and balcony."},{"start_s":4949.204,"end_s":4960.04,"action":"Selected wall type W2, clicked a wall endpoint, and began drawing a connected wall segment; panned and zoomed to position the active wall near the living room.","intent":"Extend the wall layout along the floor-plan boundary.","app":"Autodesk Revit","details":"Wall placement remained active with Chain enabled and a visible 90-degree guide."},{"start_s":4960.04,"end_s":4970.529,"action":"Navigated and zoomed around the GL plan while reviewing the wall placement, then exited the active wall-editing state.","intent":"Inspect the wall location and return to normal plan review.","app":"Autodesk Revit","details":"The view shifted from the living room area to a broader plan region."},{"start_s":4970.529,"end_s":4980.154,"action":"Zoomed and panned across the plan, dragged along the wall near the balcony, and then exited the interaction; the view settled on the overall apartment layout.","intent":"Adjust or inspect the wall geometry and review its placement in context.","app":"Autodesk Revit","details":"The final view showed the 3BHK plan with bedrooms, living area, balcony, and toilets."},{"start_s":4980.154,"end_s":4990.186,"action":"Zoomed into the bedroom, living room, and toilet region, typed wall-placement shortcuts, and clicked to start another wall segment along the plan.","intent":"Continue placing or aligning a wall around the bedroom and toilet boundary.","app":"Autodesk Revit","details":"Wall placement mode was active; the view ended near Bedroom-1 and Toilet-1."},{"start_s":4990.186,"end_s":5004.118,"action":"Panned and zoomed around Bedroom-1 and Toilet-1, selected the horizontal wall segment, and left it highlighted in wall modification mode.","intent":"Inspect and modify the wall separating the bedroom and toilet areas.","app":"Autodesk Revit","details":"The selected wall displayed as a cyan highlight across the plan."},{"start_s":5004.118,"end_s":5008.78,"action":"Selected successive wall elements and opened the wall-type dropdown, ending with Basic Wall W5 highlighted while the floor plan remained zoomed into the bathroom area.","intent":"Review or change the type of selected walls.","app":"Autodesk Revit","details":"Wall elements were selected in Floor Plan: GL."},{"start_s":5008.78,"end_s":5018.911,"action":"Selected WALL 1, exited the selection, activated Place Wall with Basic Wall W2, and navigated the zoomed floor plan with middle-button panning and scrolling.","intent":"Prepare to place or edit a wall near the bathroom plan.","app":"Autodesk Revit","details":"The wall-placement tool remained active near the end of the span."},{"start_s":5018.911,"end_s":5029.092,"action":"Canceled the active wall command, zoomed and repositioned the floor plan, then clicked around the bathroom and adjacent wall area while reactivating wall placement.","intent":"Position the view and begin another wall operation.","app":"Autodesk Revit","details":"The view moved from a broader plan view to a close-up of bathroom fixtures and a wall edge."},{"start_s":5029.092,"end_s":5041.56,"action":"Panned and zoomed around Toilet-1, canceled the current operation, and returned to Place Wall with Basic Wall W2 ready for a new start point.","intent":"Set up wall placement around the bathroom perimeter.","app":"Autodesk Revit","details":"The final view showed Toilet-1 and the adjacent right-side wall."},{"start_s":5041.56,"end_s":5051.376,"action":"Opened the wall-type list, changed the active type from W2 to W3, and navigated the close-up plan around Toilet-1 and the adjacent wall.","intent":"Choose a wall type for the next wall placement.","app":"Autodesk Revit","details":"Basic Wall W3 was selected in the Properties panel."},{"start_s":5051.376,"end_s":5061.22,"action":"Canceled and repositioned the view, then selected a horizontal wall segment between Bedroom-1 and Toilet-1; the selected wall displayed in cyan with temporary dimensions.","intent":"Inspect or modify the wall separating the bedroom and bathroom.","app":"Autodesk Revit","details":"The selected element was Basic Wall W2 in Floor Plan: GL."},{"start_s":5061.22,"end_s":5078.93,"action":"Switched to Autodesk Revit, navigated the GL floor plan around the toilet and bedroom areas, and changed into wall placement mode.","intent":"Prepare to place or modify walls in the floor plan.","app":"Autodesk Revit","details":"The view moved from TOILET-1 to M.BED ROOM while dimension and wall tools were active."},{"start_s":5078.93,"end_s":5083.423,"action":"Zoomed and panned within the M.BED ROOM area, clicked the drawing, and remained in Place Wall mode using Basic Wall: WALL 1.","intent":"Position the floor plan for wall placement.","app":"Autodesk Revit","details":"The view ended focused on the sofa and adjacent wall area."},{"start_s":5083.423,"end_s":5087.453,"action":"Opened the wall Location Line menu and reviewed the available wall types, including W2 through W8 and WALL 1.","intent":"Adjust wall placement settings or choose a wall type.","app":"Autodesk Revit","details":"The Location Line dropdown and Basic Wall type list were visible."},{"start_s":5087.453,"end_s":5105.365,"action":"Selected a wall in the plan, panned and zoomed around the bedroom and adjacent rooms, and exited the selection to return to Place Wall mode.","intent":"Inspect or position wall geometry around the bedroom layout.","app":"Autodesk Revit","details":"A wall was highlighted with properties showing Basic Wall: W2 before the view returned to the broader plan."},{"start_s":5105.365,"end_s":5115.263,"action":"Navigated toward the DRESS, POOJA, and M.TOILET rooms, zoomed into their partition junction, and interacted with wall placement and orientation controls.","intent":"Position and configure a wall near the room partitions.","app":"Autodesk Revit","details":"The view ended tightly zoomed on the partition between DRESS and the adjacent room."},{"start_s":5115.263,"end_s":5125.268,"action":"Panned and zoomed across the M.TOILET and DRESS boundary, typed wall-related input, and clicked near the wall junction while adjusting wall orientation.","intent":"Place or refine a wall segment at the room boundary.","app":"Autodesk Revit","details":"The final view showed a close-up of the wall junction with the status indicating horizontal/vertical space flips orientation."},{"start_s":5125.268,"end_s":5135.679,"action":"Scrolled and clicked around the Revit floor plan, then switched back to the Revit Project1 window showing the GL plan.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":"The view moved from the dress area toward the kitchen and Pooja room."},{"start_s":5135.679,"end_s":5150.309,"action":"Returned to the Revit Project1 floor plan, used keyboard navigation and scrolling, and activated wall placement; the view ended zoomed out around the bedroom, dress, and Pooja areas.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The wall tool was active with Basic Wall W3 selected."},{"start_s":5150.309,"end_s":5155.916,"action":"Scrolled and clicked near the dress-room doorway, then continued wall placement with Basic Wall WALL 1 active; the view ended focused on the doorway and adjacent cabinet.","intent":"Position a new wall segment near the doorway.","app":"Autodesk Revit","details":"The status prompt indicated that a wall end point was being entered."},{"start_s":5155.916,"end_s":5166.496,"action":"Changed the active wall type to Basic Wall W2, clicked near the dress-room boundary, and navigated the view while remaining in wall placement mode.","intent":"Continue defining a wall near the dress room.","app":"Autodesk Revit","details":"The view shifted to show the dress-room label and nearby bed area; no completed wall segment is clearly visible."},{"start_s":5166.496,"end_s":5176.602,"action":"Selected and manipulated the wall near the cabinet, then exited wall editing and activated the dimension tool; the view zoomed out to the overall floor plan.","intent":"Transition from wall editing to dimensioning the plan.","app":"Autodesk Revit","details":"A wall was highlighted during editing, and the final screen showed Modify | Place Dimensions."},{"start_s":5176.602,"end_s":5186.576,"action":"Used Tab and clicks to select references in the overall floor plan, then pressed Escape to leave dimension placement and return to the standard floor-plan view.","intent":"Attempt to place or inspect a dimension, then finish the operation.","app":"Autodesk Revit","details":"The final view remained centered on the lobby, drawing room, kitchen, bedroom, dress, and Pooja areas."},{"start_s":5186.576,"end_s":5196.423,"action":"Scrolled and middle-clicked around the GL floor plan, zooming into the shaft and adjacent rooms.","intent":"Inspect the floor-plan layout at a closer scale.","app":"Autodesk Revit","details":"View changed from a broader furnished plan to a close-up around the shaft."},{"start_s":5196.423,"end_s":5207.705,"action":"Scrolled and middle-clicked across the GL floor plan, moving from the shaft area through the upper apartment rooms and back toward the master bedroom and utility area.","intent":"Navigate and inspect different portions of the floor plan.","app":"Autodesk Revit","details":"The view showed the 3BHK 2001 Sqft layout before ending on a close-up of the master bedroom, dress, toilet, and utility."},{"start_s":5207.705,"end_s":5217.716,"action":"Selected wall-related elements, pressed Escape several times, entered wall selection/edit context, typed “SL,” and clicked around the master toilet and shaft area while scrolling.","intent":"Inspect or initiate wall editing around the master toilet and shaft.","app":"Autodesk Revit","details":"The contextual ribbon showed wall modification, and the selected wall appeared near the master toilet."},{"start_s":5217.716,"end_s":5229.414,"action":"Clicked and dragged along the wall junction near the master toilet and shaft, briefly selected wall geometry, canceled with Escape, and scrolled the plan.","intent":"Adjust or inspect wall geometry at the junction.","app":"Autodesk Revit","details":"Wall edges were highlighted during the drag; no definite completed modification was visible."},{"start_s":5229.414,"end_s":5239.63,"action":"Scrolled out to review a broader portion of the floor plan, clicked several areas, and selected a wall near the central corridor and apartment marker 2.","intent":"Review the overall layout and inspect another wall segment.","app":"Autodesk Revit","details":"The view widened to show multiple apartment layouts, then returned to a close-up with a wall selected."},{"start_s":5239.63,"end_s":5246.854,"action":"Typed “CS,” navigated the plan while the Place Wall tool remained active, scrolled, and clicked to position wall geometry around the drawing room and lobby.","intent":"Continue placing or positioning a wall in the floor plan.","app":"Autodesk Revit","details":"The Modify | Place Wall ribbon was visible with Basic Wall W8 selected; the final view showed the drawing room, lobby, living, and dining areas."},{"start_s":5246.854,"end_s":5257.484,"action":"Scrolled and middle-clicked within the GL floor plan, shifting the view from the full layout to a closer view of the upper drawing and balcony area.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":"Wall placement mode remained active with Basic Wall W8 selected."},{"start_s":5257.484,"end_s":5266.464,"action":"Scrolled and clicked in the drawing area, then pressed Escape while the Revit window briefly hid, moved, and resized; the view ended zoomed into the drawing-room wall and a wall was selected.","intent":"Inspect or adjust a wall location in the floor plan.","app":"Autodesk Revit","details":"The selected wall displayed a vertical orientation marker and wall-edit controls."},{"start_s":5266.464,"end_s":5276.578,"action":"Scrolled and middle-clicked around the drawing-room and balcony junction, pressed Escape, and continued selecting nearby wall geometry while the view shifted and the window briefly moved.","intent":"Inspect wall geometry around the drawing-room and balcony.","app":"Autodesk Revit","details":"The view ended with a wall selected and temporary dimension/selection graphics visible."},{"start_s":5276.578,"end_s":5290.257,"action":"Entered the keystrokes C and S, waited through repeated application hide/show activity, resized the Revit window, and clicked back into the plan.","intent":"Continue editing or navigating the Revit floor plan.","app":"Autodesk Revit","details":"The plan remained zoomed near the balcony and adjacent wall; no confirmed geometry change was visible."},{"start_s":5290.257,"end_s":5296.874,"action":"Switched back to the Revit project, scrolled the plan, clicked near the balcony wall, pressed Escape, and clicked the wall-type area in the Properties panel.","intent":"Inspect the wall and prepare to change or choose its wall type.","app":"Autodesk Revit","details":"The Properties panel showed Basic Wall W6 before the later interaction."},{"start_s":5296.874,"end_s":5302.205,"action":"Clicked in the wall-type controls, pressed Escape, switched back to Revit, and opened the Basic Wall type dropdown to display available types including W2 through W8.","intent":"Choose a wall type for the active wall placement or selection.","app":"Autodesk Revit","details":"The wall-type list was open with Basic Wall W8 highlighted."},{"start_s":5302.205,"end_s":5311.839,"action":"Activated Place Wall for Basic Wall W4, navigated around the floor plan with middle-button panning and scrolling, then canceled the active command.","intent":"Navigate the floor plan and prepare or inspect wall placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained open; the view moved from a close-up wall and balcony area."},{"start_s":5311.839,"end_s":5323.179,"action":"Selected a wall near the balcony, navigated and zoomed the view, then canceled the selection or edit state.","intent":"Inspect the wall geometry near the balcony.","app":"Autodesk Revit","details":"A cyan-highlighted wall was visible before the selection was cleared."},{"start_s":5323.179,"end_s":5333.137,"action":"Navigated across the floor plan with scrolling and panning, entered wall placement, typed a partial wall-type query, and positioned the view around the balcony and living area.","intent":"Prepare to place or inspect another wall segment.","app":"Autodesk Revit","details":"The view showed the 5' 6\" wide balcony, toilet, and living areas; Basic Wall W8 was active."},{"start_s":5333.137,"end_s":5343.166,"action":"Selected the horizontal wall or opening edge below the balcony, reviewed its dimensions, and returned to Place Wall mode while adjusting the view.","intent":"Inspect and continue wall placement along the balcony edge.","app":"Autodesk Revit","details":"The selected Basic Wall W8 showed a length of about 10.667 feet."},{"start_s":5343.166,"end_s":5358.96,"action":"Selected a vertical wall segment near the balcony and drawing area, entered wall placement, and repositioned the view toward the adjacent living and seating areas.","intent":"Continue placing or inspecting walls around the balcony perimeter.","app":"Autodesk Revit","details":"Basic Wall W8 was selected initially; Place Wall later became active with W8."},{"start_s":5358.96,"end_s":5368.612,"action":"Opened the wall-type dropdown, reviewed available Basic Wall types, switched the active type to W2, and zoomed or panned to a close-up of the adjacent wall.","intent":"Choose a different wall type for continued placement.","app":"Autodesk Revit","details":"The wall type list visibly included W2 through W8, and W2 was active at the end."},{"start_s":5368.612,"end_s":5378.585,"action":"Exited the prior wall operation, resized the Revit window, and re-entered wall placement mode while the floor plan remained zoomed near the bathroom and living area.","intent":"Continue editing walls in the floor plan.","app":"Autodesk Revit","details":"The view changed from a selected wall to the Place Wall command with the prompt to click a wall start point."},{"start_s":5378.585,"end_s":5388.77,"action":"Placed or positioned a wall segment near the bathroom and living-room boundary, panned and zoomed the floor plan, then pressed Escape and left the wall selected.","intent":"Adjust a wall along the bathroom edge.","app":"Autodesk Revit","details":"A dark wall segment is highlighted in cyan in the final view."},{"start_s":5388.77,"end_s":5398.615,"action":"Continued wall placement and navigation around the bathroom edge, panned and zoomed the plan, then selected another wall segment and left the command awaiting an endpoint.","intent":"Continue positioning the wall beside the bathroom.","app":"Autodesk Revit","details":"The final view shows a vertical wall segment selected beside the bathroom and living area."},{"start_s":5398.615,"end_s":5414.946,"action":"Selected the vertical wall, resized the Revit window, and scrolled the floor plan to review more of the bathroom and living-room area while keeping the wall selected.","intent":"Inspect and refine the selected wall placement.","app":"Autodesk Revit","details":"The selected wall remains highlighted cyan and its properties show wall dimensions."},{"start_s":5414.946,"end_s":5425.623,"action":"Opened the Basic Wall type selector, changed the active type from W2 to W5, and continued wall placement near the upper bathroom and balcony boundary before cancelling.","intent":"Choose a wall type for the ongoing wall edit.","app":"Autodesk Revit","details":"The type list visibly includes Basic Wall options, and the final properties panel identifies W5."},{"start_s":5425.623,"end_s":5438.326,"action":"Cancelled the active wall operation and panned or zoomed the floor plan around the bathroom, leaving no wall selected and the view focused on the bathroom fixture and adjacent walls.","intent":"Finish the wall edit and review the resulting plan area.","app":"Autodesk Revit","details":"The final screen shows the Floor Plan properties panel and a close-up of the bathroom area."},{"start_s":5438.326,"end_s":5444.082,"action":"Switched to Revit, entered the Align tool, and clicked near the wall and sink area while zoomed into the GL floor plan.","intent":"Align or adjust nearby floor-plan geometry.","app":"Autodesk Revit","details":"The view remained tightly zoomed on a bathroom sink and adjacent wall."},{"start_s":5444.082,"end_s":5454.223,"action":"Exited and re-entered commands, then selected a wall or raster-image region near the right side of the plan; Revit displayed the selected wall in cyan.","intent":"Select and prepare a wall or referenced element for modification.","app":"Autodesk Revit","details":"The selected element was identified as Basic Wall W8 in the Properties panel."},{"start_s":5454.223,"end_s":5464.327,"action":"Navigated around the zoomed floor plan, selected wall geometry, and dragged a wall endpoint while the Align tool remained active.","intent":"Adjust wall geometry to align with nearby reference features.","app":"Autodesk Revit","details":"The status bar indicated that an entity should be selected to align, and the final view showed wall dimensions and endpoint controls."},{"start_s":5464.327,"end_s":5473.925,"action":"Dragged the selected wall geometry, clicked near its end controls, scrolled, and pressed Escape to leave the modification; the view zoomed out to show the shower, balcony, and toilet area.","intent":"Position the wall and review its placement in the surrounding floor plan.","app":"Autodesk Revit","details":"The final view showed the broader GL floor plan with the wall no longer actively selected."},{"start_s":5473.925,"end_s":5483.422,"action":"Selected several walls around the shower, balcony, and toilet, used middle-button navigation and scrolling, and changed the active wall selection while panning across the plan.","intent":"Inspect and refine wall elements around the bathroom and balcony boundary.","app":"Autodesk Revit","details":"Wall types W5 and W2 were shown in the Properties panel during the inspection."},{"start_s":5483.422,"end_s":5493.417,"action":"Panned and zoomed across the floor plan, resized the Revit window, entered wall placement, and positioned a new Basic Wall W5 preview near the shower enclosure.","intent":"Begin placing or extending a wall along the referenced floor-plan layout.","app":"Autodesk Revit","details":"The final view was in Modify | Place Wall mode with Basic Wall W5 active and a temporary dimension visible."},{"start_s":5493.417,"end_s":5505.142,"action":"Navigated and zoomed around the GL floor plan, then selected a wall and left Revit in wall-edit mode.","intent":"Inspect and work on wall geometry near the shower area.","app":"Autodesk Revit","details":"The selected wall changed from W5 to a highlighted wall segment near the shower."},{"start_s":5505.142,"end_s":5515.613,"action":"Panned and zoomed across the floor plan while keeping the wall selected, then exited the current interaction.","intent":"Review the selected wall and its surrounding plan context.","app":"Autodesk Revit","details":"The view shifted to show the shower and adjacent plan area; the selected wall was identified as W2."},{"start_s":5515.613,"end_s":5532.412,"action":"Panned extensively down the plan to inspect the bedroom and toilet area, then returned toward the shower-side wall.","intent":"Review wall placement against nearby rooms and plan features.","app":"Autodesk Revit","details":"The selected vertical wall remained highlighted while the view moved between BED ROOM-1, TOILET-1, and the shower area."},{"start_s":5532.412,"end_s":5537.423,"action":"Opened the wall type selector, browsed the Basic Wall list, and closed it without a clearly visible type change.","intent":"Review available wall types for the selected wall.","app":"Autodesk Revit","details":"The selector visibly listed Basic Wall types including W2, W3, W4, W5, W6, W7, W8, and WALL 1."},{"start_s":5537.423,"end_s":5547.694,"action":"Reopened and browsed the wall type selector, selecting or reviewing W5 and other listed wall types while retaining the highlighted wall.","intent":"Inspect or adjust the selected wall type.","app":"Autodesk Revit","details":"The wall remained highlighted; the selector showed W5, W6, W7, W8, WALL 1, and additional wall assemblies."},{"start_s":5547.694,"end_s":5561.932,"action":"Panned and zoomed around the shower and adjacent walls, then activated Place Wall mode and positioned the cursor to begin a new wall.","intent":"Prepare to place a wall in the floor plan.","app":"Autodesk Revit","details":"The final view showed the shower area and adjacent walls; the status bar indicated “Click to enter wall start point.”"},{"start_s":5561.932,"end_s":5571.647,"action":"Switched to Autodesk Revit and continued working in the GL floor plan, selecting or previewing wall geometry around the ODU/shirt area with repeated middle-button view navigation.","intent":"Inspect or adjust wall placement in the floor plan.","app":"Autodesk Revit","details":"Basic Wall W5 was active in Modify | Place Wall mode."},{"start_s":5571.647,"end_s":5581.529,"action":"Selected wall elements and navigated the GL floor plan by panning and zooming, moving from the ODU/shirt area toward adjacent wall and opening geometry.","intent":"Review wall geometry and its alignment in the plan.","app":"Autodesk Revit","details":"Selected walls were highlighted in cyan; the view ended near the ODU/shirt area."},{"start_s":5581.529,"end_s":5591.531,"action":"Exited selection states repeatedly, clicked across the plan, and panned or zoomed to inspect a long horizontal wall near the bedroom and ODU/shirt area.","intent":"Inspect the wall location and dimensions against the floor-plan background.","app":"Autodesk Revit","details":"A Basic Wall W5 remained selected, with an approximately 18.708-foot dimension visible."},{"start_s":5591.531,"end_s":5602.309,"action":"Navigated extensively through the GL floor plan, panning and zooming from the master-toilet area out to a broad overview of the apartment layout.","intent":"Review wall placement across a larger portion of the floor plan.","app":"Autodesk Revit","details":"The view moved from the M.TOLET area to a zoomed-out plan overview while wall placement mode remained active."},{"start_s":5602.309,"end_s":5612.46,"action":"Panned and zoomed into the master bedroom, then continued across the bed and adjacent wall area while intermittently selecting or clearing wall geometry.","intent":"Inspect wall alignment around the master bedroom and nearby openings.","app":"Autodesk Revit","details":"The view showed the M.BED ROOM and bed image beneath the plan; Basic Wall W5 was active."},{"start_s":5612.46,"end_s":5622.317,"action":"Zoomed and panned around the master toilet, dressing area, and adjacent bedrooms, then exited wall modification to leave the GL floor plan in a broader view.","intent":"Finish reviewing the wall layout and return to general floor-plan viewing.","app":"Autodesk Revit","details":"The final view showed the master bedroom, dressing area, nearby bedrooms, and the Properties panel for the floor plan."},{"start_s":5622.317,"end_s":5638.274,"action":"Activated Revit and navigated the GL floor plan with scrolling and view changes, ending with a wall selected near the utility area.","intent":"Inspect or modify walls in the floor plan.","app":"Autodesk Revit","details":"The view remained in wall placement/modification mode and zoomed into the utility wall."},{"start_s":5638.274,"end_s":5648.233,"action":"Opened the wall-type selector, reviewed available Basic Wall types, and navigated the floor plan to a wider view while retaining a wall selection.","intent":"Review or change the selected wall type and inspect its placement.","app":"Autodesk Revit","details":"The selector visibly listed types including W2 through W8; the view moved from the utility area toward the bedrooms."},{"start_s":5648.233,"end_s":5667.522,"action":"Exited and re-entered wall placement interactions, navigated across the floor plan, and ended with the wall tool active near the kitchen and lift area.","intent":"Continue placing or inspecting walls across the floor plan.","app":"Autodesk Revit","details":"The final view showed the kitchen, Pooja, toilet, and Good’s Lift areas with the status prompting for a wall start point."},{"start_s":5667.522,"end_s":5672.716,"action":"Scrolled the floor plan and opened the wall-type selector again, leaving W5 highlighted.","intent":"Review the wall type before continuing wall placement.","app":"Autodesk Revit","details":"The selector displayed Basic Wall options over the kitchen and lift view."},{"start_s":5672.716,"end_s":5681.881,"action":"Panned and zoomed around the kitchen, dining, and lift areas, then clicked within the plan while wall placement remained active.","intent":"Inspect the plan and position the wall-placement operation.","app":"Autodesk Revit","details":"The view progressed from the kitchen and lift to a close-up beside the lift; W4 was shown as the current wall type."},{"start_s":5681.881,"end_s":5694.401,"action":"Scrolled and zoomed out from a close-up wall view to a broader floor-plan view showing bedrooms, utility, lobby, stairs, and lifts.","intent":"Review the broader floor-plan context after wall editing or placement.","app":"Autodesk Revit","details":"Wall placement mode remained active, with the final view centered on the stair and lift core."},{"start_s":5694.401,"end_s":5704.218,"action":"Clicked repeatedly in the Revit floor plan, scrolled, exited the active wall-placement interaction, and repositioned the view to show the bedroom, stair, and exhaust shaft area.","intent":"Navigate the floor plan and adjust the active wall-placement view.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Wall mode with Basic Wall W4 visible in the Properties panel."},{"start_s":5704.218,"end_s":5714.498,"action":"Switched back to the Revit window, opened the wall-type selector, selected Basic Wall W2, and zoomed or panned toward the STP Exhaust Shaft while beginning a wall endpoint placement.","intent":"Choose a wall type and position a wall endpoint near the exhaust shaft.","app":"Autodesk Revit","details":"The wall-type dropdown showed W2 through W8; the view ended focused on the STP Exhaust Shaft."},{"start_s":5714.498,"end_s":5718.968,"action":"Selected wall elements around the exhaust shaft, changing the active selection from Basic Wall W5 to Basic Wall W8 and highlighting a narrow wall segment.","intent":"Inspect or select different wall segments around the exhaust shaft.","app":"Autodesk Revit","details":"The Modify | Walls contextual tools and wall properties were visible."},{"start_s":5718.968,"end_s":5723.368,"action":"Scrolled and opened the wall-type selector, then selected Basic Wall W6 while keeping the exhaust-shaft wall segment in view.","intent":"Change the selected wall's type near the exhaust shaft.","app":"Autodesk Revit","details":"The wall-type dropdown was visible with W6 selected at the end of the span."},{"start_s":5723.368,"end_s":5729.748,"action":"Selected Basic Wall W7 in the wall properties and briefly dismissed the active interaction while leaving the narrow wall beside the exhaust shaft highlighted.","intent":"Continue cycling wall types for the selected shaft-adjacent wall.","app":"Autodesk Revit","details":"Basic Wall W7 was shown in the Properties panel and the selected wall remained highlighted cyan."},{"start_s":5729.748,"end_s":5739.757,"action":"Opened the wall-type selector, interacted with the selected wall, then exited wall modification and returned to the general floor-plan view focused on the STP Exhaust Shaft.","intent":"Finalize or review the wall selection and inspect the resulting floor-plan view.","app":"Autodesk Revit","details":"The final screenshot showed the Properties panel for Floor Plan: GL and no active wall-selection context."},{"start_s":5739.757,"end_s":5745.121,"action":"Clicked around the Revit floor plan, pressed Escape several times, and resized or repositioned the window, leaving the wall placement command exited and the GL plan visible.","intent":"Exit the active wall-placement interaction and return to the plan view.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with the shaft area in view."},{"start_s":5745.121,"end_s":5762.368,"action":"Navigated the GL floor plan by panning and scrolling, then clicked a wall near the shaft and left it selected.","intent":"Inspect and select a wall element in the shaft area.","app":"Autodesk Revit","details":"A Basic Wall W2 was selected near the right side of the shaft."},{"start_s":5762.368,"end_s":5766.552,"action":"Opened the wall type selector and changed the selected wall from Basic Wall W2 to Basic Wall W5.","intent":"Change the selected wall's type.","app":"Autodesk Revit","details":"The wall remained selected beside the shaft, with W5 shown in Properties."},{"start_s":5766.552,"end_s":5777.036,"action":"Scrolled and panned around the shaft, selected another wall, and changed its type through the wall type selector to Basic Wall W7.","intent":"Inspect adjacent geometry and assign a different wall type.","app":"Autodesk Revit","details":"The selected wall was shown as Basic Wall W7 beside the STP Exhaust Shaft."},{"start_s":5777.036,"end_s":5786.637,"action":"Opened the wall type selector, navigated the floor plan with repeated scrolling and panning, and selected the wall near the shaft while reviewing its placement.","intent":"Review nearby walls and prepare the shaft-side wall for further editing.","app":"Autodesk Revit","details":"The view was zoomed out and then repositioned around the STP Exhaust Shaft; Basic Wall W7 remained selected."},{"start_s":5786.637,"end_s":5805.85,"action":"Panned and scrolled around the GL floor plan, repeatedly selected the shaft-side wall, and adjusted the view to inspect the STP Exhaust Shaft and adjacent room area.","intent":"Inspect the selected wall and surrounding floor-plan geometry.","app":"Autodesk Revit","details":"The final view was zoomed in on the STP Exhaust Shaft with Basic Wall W7 selected."},{"start_s":5805.85,"end_s":5810.272,"action":"Selected different wall elements in the Revit GL floor plan, switching the wall type shown in Properties from W2 to W5.","intent":"Inspect or select walls in the floor plan.","app":"Autodesk Revit","details":"The view remained zoomed into the raster floor-plan area around the STP Exhaust Shaft."},{"start_s":5810.272,"end_s":5820.698,"action":"Opened the wall-type selector, reviewed available Basic Wall types, then exited the selection and zoomed/panned the GL floor plan to a wider view around the shafts, corridor, and bedrooms.","intent":"Review wall types and navigate to another floor-plan area.","app":"Autodesk Revit","details":"The wall-type list visibly included W5, W6, W7, W8, and other wall types."},{"start_s":5820.698,"end_s":5840.141,"action":"Activated Place Wall with Basic Wall W2 selected, navigated and zoomed around the corridor and shaft area, and positioned a wall endpoint preview near the Staircase Press. Shaft before cancelling or leaving the command.","intent":"Begin placing or inspecting a wall segment near the shaft corridor.","app":"Autodesk Revit","details":"The status bar indicated wall endpoint placement and space-flip orientation; no completed wall placement is clearly evidenced."},{"start_s":5840.141,"end_s":5856.272,"action":"Selected and inspected wall geometry around the FHC, Lobby Press. Shaft, corridor, lifts, and adjacent rooms while panning and zooming the GL floor plan; entered text resembling “SL” and then cancelled transient interactions.","intent":"Inspect or adjust wall geometry in the floor plan.","app":"Autodesk Revit","details":"A selected wall was shown as Basic Wall W5, with temporary dimensions visible near the shaft."},{"start_s":5856.272,"end_s":5865.909,"action":"Panned and zoomed around the corridor, shafts, stairs, and lifts, selected wall edges and opened transient editing states, then cancelled while leaving the wall geometry selected.","intent":"Review wall joins and alignment around the shaft area.","app":"Autodesk Revit","details":"The selected wall was highlighted in cyan and the status bar showed a wall disallow-join state."},{"start_s":5865.909,"end_s":5875.215,"action":"Zoomed out from the GL floor plan and switched to the {3D} view, displaying the building model as a small isometric set of walls and rooms.","intent":"Review the modeled building in three dimensions.","app":"Autodesk Revit","details":"The final screen showed Autodesk Revit 2025.4 - Project1 - 3D View: {3D}."},{"start_s":5875.215,"end_s":5884.982,"action":"Activated Autodesk Revit and navigated the GL floor plan with middle-button panning and scrolling, changing from a broad apartment layout to a closer view of the lobby, stairs, and nearby units.","intent":"Inspect the GL floor plan in greater detail.","app":"Autodesk Revit","details":null},{"start_s":5884.982,"end_s":5894.996,"action":"Continued panning and scrolling across the GL floor plan, moving between apartment units and the central lobby and stair areas.","intent":"Review additional areas of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":5894.996,"end_s":5905.107,"action":"Panned and zoomed around the central lobby and adjacent units, then typed WA and entered wall-placement mode; the Revit window was briefly resized while the view focused on the shaft and corridor area.","intent":"Begin placing or editing a wall near the shaft and corridor.","app":"Autodesk Revit","details":"Wall placement mode was active at the end of the span."},{"start_s":5905.107,"end_s":5919.845,"action":"Exited and re-entered wall-related operations while panning around the lobby and shaft, selected walls, and switched wall types in the properties/type selector; the view remained tightly focused on the shaft and corridor.","intent":"Configure and position a wall element in the floor plan.","app":"Autodesk Revit","details":"Visible wall types included Basic Wall W2, W4, and W5."},{"start_s":5919.845,"end_s":5936.561,"action":"Opened the wall type selector, browsed wall types, panned and zoomed to the shaft doorway, and selected a wall segment for modification; the view ended on a close-up of the doorway and adjacent wall.","intent":"Choose a wall type and refine the wall placement near the shaft opening.","app":"Autodesk Revit","details":"The wall type list displayed Basic Wall options including W2 through W8 and WALL 1."},{"start_s":5936.561,"end_s":5951.713,"action":"Dismissed a Revit warning, continued panning and zooming around the FHC shaft, and used wall placement/extension controls to position a wall endpoint along the shaft boundary.","intent":"Resolve the warning and adjust the wall geometry around the shaft.","app":"Autodesk Revit","details":"The status bar indicated horizontal and extension editing for Basic Wall W4."},{"start_s":5951.713,"end_s":5960.441,"action":"Switched to Autodesk Revit, navigated the GL floor plan, and selected a wall near the shaft area while the wall placement tool remained active.","intent":"Inspect or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The selected wall is shown as Basic Wall W5 in the Properties panel."},{"start_s":5960.441,"end_s":5964.58,"action":"Changed the selected wall type from W5 to W3, then opened the Basic Wall type list and reviewed available wall types.","intent":"Choose a different wall type for the selected wall.","app":"Autodesk Revit","details":"The wall type dropdown visibly lists W2, W3, W4, W5, W6, W7, W8, and WALL 1."},{"start_s":5964.58,"end_s":5976.933,"action":"Closed the type list, navigated around the floor plan, exited the current interaction, and selected the horizontal wall segment above the shaft.","intent":"Inspect or prepare another wall segment for editing.","app":"Autodesk Revit","details":"The selected horizontal wall segment is highlighted in cyan."},{"start_s":5976.933,"end_s":5981.187,"action":"Reviewed the selected horizontal wall and reopened the Basic Wall type list while keeping the wall selected.","intent":"Review or change the wall type.","app":"Autodesk Revit","details":"Basic Wall W3 is selected and the type list is open."},{"start_s":5981.187,"end_s":5993.492,"action":"Navigated and zoomed around the GL floor plan, used keyboard commands to exit or adjust tools, and initiated the Align command against a wall reference.","intent":"Align or reposition wall geometry in the floor plan.","app":"Autodesk Revit","details":"The final view shows Modify | Align with a vertical dashed alignment reference."},{"start_s":5993.492,"end_s":6008.742,"action":"Exited the alignment interaction, navigated and zoomed to the lobby and utility area, then activated Place Wall with Basic Wall W5 selected and positioned the view for a new wall start point.","intent":"Prepare to draw another wall in the floor plan.","app":"Autodesk Revit","details":"The status bar says “Click to enter wall start point,” and the view is zoomed near the utility/lobby boundary."},{"start_s":6008.742,"end_s":6014.112,"action":"Switched to Revit, clicked in the floor plan, and opened the Basic Wall type list while the Place Wall tool remained active.","intent":"Prepare to choose a wall type for wall placement.","app":"Autodesk Revit","details":"Floor Plan: GL; Basic Wall W8 was active and the type list was visible at the end."},{"start_s":6014.112,"end_s":6023.836,"action":"Selected a different Basic Wall type from the type list, then clicked in the plan and repositioned the view with middle-button navigation.","intent":"Set the wall type and position the plan for continued placement.","app":"Autodesk Revit","details":"Basic Wall W4 was shown as the active type; the view remained zoomed near the lift area."},{"start_s":6023.836,"end_s":6033.894,"action":"Typed a wall-type search fragment, moved the view to another corner of the plan, and continued the wall placement sequence before canceling the active input.","intent":"Locate or place the next wall segment in the floor plan.","app":"Autodesk Revit","details":"The view shifted to a corner near the lift; Basic Wall W4 remained active."},{"start_s":6033.894,"end_s":6053.78,"action":"Navigated and zoomed around the lift area, selected the wall, then returned to Place Wall mode and repositioned the view.","intent":"Inspect the wall geometry and resume wall placement from a new location.","app":"Autodesk Revit","details":"A wall was selected briefly; the lift annotation and surrounding wall geometry were visible."},{"start_s":6053.78,"end_s":6060.245,"action":"Scrolled the plan and opened the Basic Wall type list, leaving W4 selected while the wall-placement command remained active.","intent":"Review available wall types before continuing placement.","app":"Autodesk Revit","details":"The type list displayed W2 through W8 and WALL 1; W4 was highlighted."},{"start_s":6060.245,"end_s":6070.365,"action":"Selected Basic Wall W7, clicked in the plan, and placed a horizontal wall segment across the opening, with a temporary dimension of 4.750 feet visible.","intent":"Place the next wall segment using the W7 wall type.","app":"Autodesk Revit","details":"The horizontal segment was being positioned between two existing wall ends; Place Wall remained active."},{"start_s":6070.365,"end_s":6080.104,"action":"Typed a wall-related shortcut, briefly hid and restored the Revit window, then exited and clicked in the plan view; the wall remained selected near the lift area.","intent":"Continue editing or inspecting a wall in the GL floor plan.","app":"Autodesk Revit","details":"Basic Wall W7 was selected and the view remained tightly zoomed near the lift."},{"start_s":6080.104,"end_s":6092.531,"action":"Scrolled and middle-clicked to pan or zoom around the selected wall, bringing the GOOD'S LIFT area and surrounding plan into view.","intent":"Reposition the floor-plan view to inspect the wall around the lift.","app":"Autodesk Revit","details":"The selected wall remained highlighted across the lower part of the lift area."},{"start_s":6092.531,"end_s":6102.453,"action":"Scrolled and panned around the lift, exited an active mode, typed a shortcut, and entered aligned dimension placement; moved across references without visibly placing a completed dimension.","intent":"Prepare to dimension the lift enclosure and inspect its references.","app":"Autodesk Revit","details":"Revit displayed Modify | Place Dimensions with aligned dimension selected."},{"start_s":6102.453,"end_s":6112.232,"action":"Tabbed through dimension references and clicked around the lift enclosure, then pressed Escape repeatedly to cancel the dimension operation and return to the normal plan view.","intent":"Attempt and then cancel dimension placement around the lift.","app":"Autodesk Revit","details":"No completed dimension was visible; the GOOD'S LIFT image remained centered."},{"start_s":6112.232,"end_s":6123.728,"action":"Scrolled out substantially and panned across the GL floor plan, changing from the lift close-up to a broader view and then toward the drawing and lobby areas.","intent":"Review the lift’s location within the surrounding floor plan.","app":"Autodesk Revit","details":"The broader plan showed labeled rooms including DRAWING, DINING, KITCHEN, LOBBY, and GOOD'S LIFT."},{"start_s":6123.728,"end_s":6134.317,"action":"Typed a wall shortcut, selected or activated wall placement, and scrolled and panned near a doorway and adjacent wall; clicked references while positioning the wall tool and ended with it still active.","intent":"Continue placing or adjusting a wall near the doorway beside the lobby.","app":"Autodesk Revit","details":"Modify | Place Wall was active for Basic Wall W7 with chain enabled."},{"start_s":6134.317,"end_s":6152.641,"action":"Returned to Autodesk Revit and adjusted the floor-plan view around the kitchen and dining area, then activated Place Wall mode.","intent":"Prepare to add or modify a wall in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; wall placement became active near the kitchen counter and fridge."},{"start_s":6152.641,"end_s":6162.468,"action":"Selected the Basic Wall W2 type, navigated and zoomed around the dining area, and began positioning a wall segment before cancelling or leaving the placement operation.","intent":"Position a new wall segment in the floor plan.","app":"Autodesk Revit","details":"The view shifted from the fridge area toward the dining room; no completed wall placement is clearly visible."},{"start_s":6162.468,"end_s":6169.175,"action":"Selected a wall and panned and zoomed out across the floor plan, ending with the broader apartment layout visible before exiting the active operation.","intent":"Inspect the selected wall and its surrounding floor-plan context.","app":"Autodesk Revit","details":"A wall was selected near the kitchen, and the final view showed multiple rooms and corridors."},{"start_s":6169.175,"end_s":6179.748,"action":"Reviewed the floor plan and scrolled to reposition the view over the bedroom, dining, living, and kitchen areas.","intent":"Inspect the layout and wall locations.","app":"Autodesk Revit","details":"No clear edit was made during this interval."},{"start_s":6179.748,"end_s":6193.193,"action":"Continued reviewing the floor plan, then zoomed in toward the dining room and adjacent living and kitchen areas.","intent":"Examine the central room layout at a closer scale.","app":"Autodesk Revit","details":"The view ended centered on the dining table and nearby rooms; system connectivity and power status changed near the end."},{"start_s":6193.193,"end_s":6203.892,"action":"Panned and zoomed to the Toilet-1 and living-room area, typed “WA,” and activated Place Wall mode while positioning a wall segment along the lower edge of the bathroom.","intent":"Add or position a wall near Toilet-1 and the living area.","app":"Autodesk Revit","details":"Basic Wall W2 was active; the wall-placement preview and temporary dimension were visible, with no confirmed completion."},{"start_s":6203.892,"end_s":6214.144,"action":"Exited and re-entered the dimension workflow, adjusted the view around the toilet, living, and dining areas, and clicked reference points to position a dimension.","intent":"Place or adjust dimensions on the floor plan.","app":"Autodesk Revit","details":"The view remained on Floor Plan: GL with Modify | Place Dimensions active."},{"start_s":6214.144,"end_s":6218.921,"action":"Exited the dimension command, zoomed and panned out from the apartment detail to a broader floor-plan view, then exited the navigation state.","intent":"Review the overall floor-plan layout.","app":"Autodesk Revit","details":"The final view showed multiple apartment units and the central lobby/core."},{"start_s":6218.921,"end_s":6236.523,"action":"Kept the broader floor plan in view and used middle-mouse navigation to pan or zoom toward the lower apartment area.","intent":"Navigate to another region of the floor plan for inspection.","app":"Autodesk Revit","details":"The view ended focused on dining, kitchen, bedrooms, toilets, and lobby areas."},{"start_s":6236.523,"end_s":6240.859,"action":"Panned and zoomed into the bedroom, toilet, living, and dining area, then activated the wall-placement command.","intent":"Prepare to place a wall in the selected floor-plan region.","app":"Autodesk Revit","details":"The interface ended in Modify | Place Wall with Basic Wall W2 selected."},{"start_s":6240.859,"end_s":6250.053,"action":"Opened the wall-type selector, reviewed the available Basic Wall types, and selected or retained Basic Wall W2 while entering wall-edit context.","intent":"Choose a wall type and begin wall placement.","app":"Autodesk Revit","details":"The wall-type list displayed W2, W3, W4, W5, W6, W7, W8, and WALL 1; a wall was later selected for modification."},{"start_s":6250.053,"end_s":6259.783,"action":"Navigated around the bedroom and master-toilet area, entered wall placement with Basic Wall W2, and clicked to define a wall endpoint or segment near the bedroom/toilet boundary.","intent":"Place or modify a wall along the bedroom and toilet area.","app":"Autodesk Revit","details":"The final view showed the wall-placement tool active, with a temporary dimension visible near the selected wall."},{"start_s":6259.783,"end_s":6270.037,"action":"Navigated and zoomed the Revit GL floor plan, then selected a wall near the bedroom and toilet area.","intent":"Inspect and work on wall geometry in the floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader plan view with a wall selected."},{"start_s":6270.037,"end_s":6279.815,"action":"Zoomed and panned across the selected wall, bringing the M.TOILET area and adjacent rooms into closer view.","intent":"Inspect the wall alignment around the toilet and dressing areas.","app":"Autodesk Revit","details":"The selected cyan wall remained visible while the view moved to a close-up of M.TOILET."},{"start_s":6279.815,"end_s":6289.756,"action":"Zoomed out and panned across the floor plan, then entered wall placement mode and positioned the cursor around the bedroom and dressing area.","intent":"Prepare to place or extend a wall in the floor plan.","app":"Autodesk Revit","details":"The ribbon showed Modify | Place Wall and the plan displayed M.TOILET, DRESS, and M.BED ROOM."},{"start_s":6289.756,"end_s":6299.396,"action":"Placed or adjusted a horizontal wall segment along the lower edge of the toilet area, then zoomed in and repositioned the view around its endpoint.","intent":"Modify the wall layout near the toilet fixture and adjacent room.","app":"Autodesk Revit","details":"A cyan horizontal wall was visible with a Horizontal alignment cue and wall properties showing a 10-foot length."},{"start_s":6299.396,"end_s":6309.713,"action":"Exited and re-entered wall placement interactions while zooming and panning toward the left-side bathroom, then positioned the cursor near the ODU fixture area.","intent":"Continue laying out walls around the bathroom plan.","app":"Autodesk Revit","details":"The view shifted from the M.TOILET room to a close-up of the left-side ODU area; wall placement remained active at the end."},{"start_s":6309.713,"end_s":6320.281,"action":"Continued placing or positioning a wall along the left-side bathroom area, zoomed and panned through the ODU fixtures, and left wall placement active.","intent":"Extend the wall layout around the bathroom enclosure.","app":"Autodesk Revit","details":"The status bar indicated wall placement, including prompts to enter a wall end point and close the loop."},{"start_s":6320.281,"end_s":6330.395,"action":"Navigated and zoomed around the GL floor plan, selecting wall or raster-plan geometry and repeatedly cancelling transient commands while the Revit window refreshed.","intent":"Inspect the floor-plan area and target wall geometry.","app":"Autodesk Revit","details":"Floor Plan: GL; view remained tightly zoomed near the wash area."},{"start_s":6330.395,"end_s":6340.17,"action":"Scrolled and clicked through the plan, selected a Basic Wall W2, and repositioned the view along the wall while retaining wall modification mode.","intent":"Inspect or prepare the selected wall for modification.","app":"Autodesk Revit","details":"Selected wall displayed in cyan with Modify | Walls active."},{"start_s":6340.17,"end_s":6350.147,"action":"Zoomed out to review the bathroom and dressing-room layout, then activated wall placement and positioned the cursor near the dressing-room boundary.","intent":"Begin placing or extending a wall along the plan layout.","app":"Autodesk Revit","details":"Modify | Place Wall was active near the end of the span."},{"start_s":6350.147,"end_s":6361.023,"action":"Continued positioning the wall-placement cursor around the dressing-room and adjacent open area, panned and zoomed the plan, and cancelled or refreshed the active command before switching windows.","intent":"Align a new wall segment with the floor-plan geometry.","app":"Autodesk Revit","details":"Wall type W2 and placement controls remained visible."},{"start_s":6361.023,"end_s":6371.049,"action":"Returned to the Revit project, changed the active wall type to Basic Wall W3, panned and zoomed around the dressing-room boundary, and adjusted the wall-placement view.","intent":"Continue laying out or aligning the wall around the dressing room.","app":"Autodesk Revit","details":"Modify | Place Wall remained active; W3 was shown in Properties."},{"start_s":6371.049,"end_s":6380.944,"action":"Entered wall-placement input, repositioned the view to the bathroom and dressing-room doorway, dragged or clicked near the lower wall edge, and left the command ready for another wall start point.","intent":"Position the next wall segment or refine its endpoint.","app":"Autodesk Revit","details":"Status bar indicated “Click to enter wall start point”; no completed segment is clearly visible."},{"start_s":6380.944,"end_s":6391.1,"action":"Adjusted the Revit view around the selected wall, navigated the floor plan with clicks and scrolling, and resized the window to show a broader room layout.","intent":"Inspect and reposition the floor-plan view around a wall element.","app":"Autodesk Revit","details":"The view changed from a close-up selected wall to a wider floor-plan view showing bedrooms, toilets, and dressing areas."},{"start_s":6391.1,"end_s":6401.313,"action":"Activated aligned dimension placement, clicked wall references, then exited the command and navigated upward through the floor plan.","intent":"Attempt to place or inspect dimensions between wall references.","app":"Autodesk Revit","details":"The Modify | Place Dimensions context was visible briefly, with a reference line displayed before the command was canceled."},{"start_s":6401.313,"end_s":6409.307,"action":"Zoomed and panned out from the local bedroom area to review a larger portion of the residential floor plan, then scrolled to reposition the view.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The view progressed from a bedroom and toilet close-up to a broad layout with multiple apartment units and shared spaces."},{"start_s":6409.307,"end_s":6423.705,"action":"Panned and zoomed around the floor plan to inspect the bedroom, toilet, living, dining, drawing, and balcony areas.","intent":"Examine room layouts and relationships in the floor plan.","app":"Autodesk Revit","details":"The final view centered on the 3BHK unit labeled 1992 Sft., including Bedroom-1, Toilet-1, Living, Drawing, Dining, and balcony."},{"start_s":6423.705,"end_s":6433.876,"action":"Navigated across the plan toward the master and second bedrooms, selected a wall, and resized the Revit window while continuing inspection.","intent":"Inspect wall geometry and room boundaries in another portion of the plan.","app":"Autodesk Revit","details":"A Basic Wall W2 was selected in the view showing M.BED ROOM and BED ROOM-2."},{"start_s":6433.876,"end_s":6443.407,"action":"Panned and scrolled downward across the bedroom and dining area, canceled the prior wall selection, and activated Place Wall for Basic Wall W2.","intent":"Prepare to place or modify a wall near the pooja and toilet areas.","app":"Autodesk Revit","details":"The final view showed the POOJA and TOILET-2 areas, with the Modify | Place Wall tool active and waiting for a start point."},{"start_s":6443.407,"end_s":6453.263,"action":"Exited and repositioned the Revit view, then activated wall placement and navigated the floor plan around the bedroom, toilet, and utility areas.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The view ended in Place Wall mode with Basic Wall W2 selected."},{"start_s":6453.263,"end_s":6463.81,"action":"Exited wall placement, selected the wall geometry, and navigated the zoomed floor plan while inspecting the wall near the pooja area.","intent":"Inspect and select an existing wall segment for modification.","app":"Autodesk Revit","details":"The selected wall was highlighted in cyan in the GL floor plan."},{"start_s":6463.81,"end_s":6473.672,"action":"Selected the wall, navigated the view downward across the bedroom, toilet, and utility spaces, and re-entered Place Wall mode.","intent":"Continue wall editing and prepare another wall placement operation.","app":"Autodesk Revit","details":"A wall segment was selected before the view moved to the lower portion of the plan."},{"start_s":6473.672,"end_s":6488.75,"action":"Placed or positioned a wall segment near the bathroom and utility area, then navigated the plan and switched back to wall modification.","intent":"Modify the wall layout around the bathroom and utility spaces.","app":"Autodesk Revit","details":"The wall was highlighted along the boundary beside the sink and washing-machine area."},{"start_s":6488.75,"end_s":6493.855,"action":"Scrolled the view and opened the wall type selector, displaying Basic Wall types; selected WALL 1 for the highlighted wall.","intent":"Change the type of the selected wall.","app":"Autodesk Revit","details":"The type selector showed W2, W3, W4, W5, W6, W7, W8, and WALL 1."},{"start_s":6493.855,"end_s":6498.242,"action":"Navigated the wall type selector and changed the selected wall type from WALL 1 to W3.","intent":"Apply a different Basic Wall type to the selected wall.","app":"Autodesk Revit","details":"The selector was open with W3 highlighted, and the Properties panel identified the wall as Basic Wall W3."},{"start_s":6498.242,"end_s":6504.947,"action":"Scrolled and zoomed the Revit floor plan around Toilet-2 and the utility area, then inspected the selected wall and its dimensions.","intent":"Inspect the wall geometry and surrounding floor-plan layout.","app":"Autodesk Revit","details":"Basic Wall W2 remained selected; the view ended zoomed in near the upper wall edge."},{"start_s":6504.947,"end_s":6519.286,"action":"Scrolled and clicked around the floor plan, exited the prior interaction, and activated wall placement; the view repositioned to show Pooja, Toilet-2, and the kitchen.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"The final view showed Modify | Place Wall with Basic Wall W2 selected and a prompt to click to enter the wall start point."},{"start_s":6519.286,"end_s":6529.245,"action":"Opened the wall type selector, chose Basic Wall W3, and clicked in the plan near the upper edge of Toilet-2 while wall placement remained active.","intent":"Select a different wall type and begin placing it in the floor plan.","app":"Autodesk Revit","details":"The wall type list visibly contained W2, W3, W4 and other basic wall types; W3 was selected by the end."},{"start_s":6529.245,"end_s":6538.998,"action":"Scrolled and repositioned the plan, then clicked to place the active W3 wall across the area above Toilet-2 and beside the kitchen; the new wall appeared highlighted in cyan.","intent":"Place the selected wall segment along the partition near Toilet-2 and the kitchen.","app":"Autodesk Revit","details":"The highlighted horizontal wall spans the boundary above Toilet-2 toward the kitchen."},{"start_s":6538.998,"end_s":6548.914,"action":"Typed shortcut keys, adjusted the view, and clicked or dragged along the wall area; then canceled the active operation and resized the Revit window.","intent":"Refine or inspect the newly placed wall segment.","app":"Autodesk Revit","details":"The final view showed Basic Wall W3 selected and a cyan horizontal wall segment near the utility area."},{"start_s":6548.914,"end_s":6560.987,"action":"Scrolled and clicked around the floor plan while wall placement remained active, moving from the utility and kitchen area toward the lower rooms; the view ended zoomed into the lower plan.","intent":"Continue positioning or preparing another wall segment in the floor plan.","app":"Autodesk Revit","details":"Modify | Place Wall remained active with Basic Wall W3, and the status bar prompted for a wall start point."},{"start_s":6560.987,"end_s":6572.605,"action":"Activated Revit’s wall placement tool, selected wall types W3 and W2, and navigated the GL floor plan with clicks, middle-button panning, and scrolling.","intent":"Modify or place walls in the GL floor plan.","app":"Autodesk Revit","details":"Wall placement remains active, with a wall preview or placement reference visible near the bathroom area."},{"start_s":6572.605,"end_s":6582.111,"action":"Exited the active interaction, panned and zoomed across the GL floor plan, then reactivated wall placement and moved to another area of the plan.","intent":"Navigate the floor plan and position a wall modification or placement.","app":"Autodesk Revit","details":"The view shifts across the bathroom and adjacent rooms; wall type W2 is active at the end."},{"start_s":6582.111,"end_s":6592.029,"action":"Selected a wall, adjusted the view with middle-button navigation and scrolling, and left a wall segment highlighted while inspecting its dimensions and location.","intent":"Inspect and adjust a wall segment in the floor plan.","app":"Autodesk Revit","details":"A Basic Wall W2 is selected; the highlighted segment and temporary dimension graphics are visible."},{"start_s":6592.029,"end_s":6601.488,"action":"Entered wall-placement input and navigated the plan, then selected or positioned a horizontal wall segment near the bathroom fixtures.","intent":"Continue positioning or editing the wall layout.","app":"Autodesk Revit","details":"Wall placement remains active and the horizontal wall near the sinks is highlighted at the end."},{"start_s":6601.488,"end_s":6611.005,"action":"Selected a wall-related value, entered -6' and confirmed it, then switched from the GL floor plan to the 3D view.","intent":"Set a wall offset or dimension and review the resulting model in 3D.","app":"Autodesk Revit","details":"The Properties panel shows Top Offset -6.000' before the view changes to 3D."},{"start_s":6611.005,"end_s":6620.367,"action":"Navigated the 3D view with middle-button orbiting and scrolling, zooming from the overall building model into a close view of brick walls, doors, and windows.","intent":"Inspect the modified building model in 3D.","app":"Autodesk Revit","details":"The final view is a close-up of the exterior brick wall assembly."},{"start_s":6620.367,"end_s":6637.067,"action":"Navigated from the 3D view to the GL floor plan, zoomed and panned across the layout, and briefly adjusted the Revit window before continuing.","intent":"Inspect the building model and floor-plan layout.","app":"Autodesk Revit","details":"The view changed from 3D View: {3D} to Floor Plan: GL."},{"start_s":6637.067,"end_s":6647.044,"action":"Zoomed and panned around the GL floor plan, then switched back to the 3D view.","intent":"Review the floor-plan arrangement and compare it with the model view.","app":"Autodesk Revit","details":"The floor plan showed furnished rooms including bedrooms, toilets, dining, and living areas before the title changed to 3D View: {3D}."},{"start_s":6647.044,"end_s":6657.175,"action":"Adjusted the 3D view with repeated orbit or pan inputs, then returned to the GL floor plan and repositioned the view.","intent":"Inspect the model geometry and corresponding floor-plan layout.","app":"Autodesk Revit","details":"The 3D view displayed wall geometry, followed by a furnished GL floor plan."},{"start_s":6657.175,"end_s":6666.74,"action":"Panned and zoomed extensively across the GL floor plan, moving between room groups, bedrooms, toilets, dining, kitchen, lobby, and stair areas.","intent":"Survey different portions of the floor-plan layout.","app":"Autodesk Revit","details":"The final view showed a broader furnished plan with room labels and the lobby/stair area."},{"start_s":6666.74,"end_s":6676.435,"action":"Continued panning and zooming across the GL floor plan, moving from furnished rooms toward the lobby, lifts, stairs, and corridors.","intent":"Inspect circulation and service areas in the floor plan.","app":"Autodesk Revit","details":"The view ended centered on the lobby, multiple lifts, stairs, dining, drawing, kitchen, and bedroom areas."},{"start_s":6676.435,"end_s":6693.574,"action":"Zoomed into the utility and toilet area, activated wall placement, typed 'WA', and selected a wall for editing or placement; the view was resized and further zoomed while the wall became highlighted with a dimension.","intent":"Begin modifying or inspecting a wall in the GL floor plan.","app":"Autodesk Revit","details":"Revit showed Modify | Place Wall and then Modify | Walls for a Basic Wall W2, with a highlighted wall measuring approximately 9.908 feet."},{"start_s":6693.574,"end_s":6712.983,"action":"Selected wall elements in the GL floor plan, changed a wall constraint by entering -6', and reviewed the resulting wall properties while zooming and panning.","intent":"Adjust wall elevation or offset in the floor plan.","app":"Autodesk Revit","details":"Selected walls showed a Top Offset of -6.000' after the entry."},{"start_s":6712.983,"end_s":6722.599,"action":"Activated Place Wall, opened the Basic Wall type list, selected different wall types including W2 and W5, and panned across the bathroom and adjacent plan area.","intent":"Choose a wall type and position a new wall in the floor plan.","app":"Autodesk Revit","details":"The wall placement tool remained active with Chain enabled."},{"start_s":6722.599,"end_s":6732.645,"action":"Continued panning and zooming across the floor plan with wall placement active, clicked in the plan, and pressed Escape to cancel or exit the current placement operation.","intent":"Navigate the plan and end the current wall placement attempt.","app":"Autodesk Revit","details":"The view ended zoomed into a wall and adjacent room area."},{"start_s":6732.645,"end_s":6752.246,"action":"Zoomed and panned out to review the bedroom, bathroom, and utility areas, selected a wall, and reopened the wall type list while returning to Place Wall mode.","intent":"Inspect wall layout and prepare another wall placement using a selected type.","app":"Autodesk Revit","details":"The selected wall was Basic Wall W5; the plan showed a long cyan-highlighted wall across the room layout."},{"start_s":6752.246,"end_s":6769.907,"action":"Opened the wall type list, navigated and zoomed through the floor plan, selected W8, and continued positioning the wall tool near the upper plan area before changing the view.","intent":"Select and position a different wall type in the floor plan.","app":"Autodesk Revit","details":"The active type changed to Basic Wall W8."},{"start_s":6769.907,"end_s":6779.793,"action":"Selected wall type W4, zoomed and panned to the bedroom and adjacent wall intersection, and clicked to position or adjust the wall while viewing its extension and alignment dimensions.","intent":"Place or align a wall segment relative to the existing room geometry.","app":"Autodesk Revit","details":"The view displayed Basic Wall W4 with temporary dimensions around the selected wall geometry."},{"start_s":6779.793,"end_s":6792.158,"action":"Exited the wall-placement state, navigated and zoomed the GL floor plan, then selected a wall near the room image and returned focus to Revit.","intent":"Inspect and select wall geometry in the floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up wall-placement display to a selected wall with a visible 14.371-foot dimension."},{"start_s":6792.158,"end_s":6801.353,"action":"Clicked among nearby wall segments and pressed Escape to clear or cancel selections, changing the selected wall type from W2 to W8 and back to an unselected floor-plan view.","intent":"Review adjacent wall elements and adjust the active selection.","app":"Autodesk Revit","details":"The GL floor plan remained zoomed in around the chair image and horizontal wall."},{"start_s":6801.353,"end_s":6811.703,"action":"Pressed Escape repeatedly, clicked the plan, dragged across the view, and selected the horizontal wall segment near the lower edge of the chair image.","intent":"Position the view and select the wall segment for editing.","app":"Autodesk Revit","details":"The final view shows the wall selected as Basic Wall W2 with a temporary 0.700-foot dimension."},{"start_s":6811.703,"end_s":6824.298,"action":"Zoomed and panned the GL floor plan, entered the Delete Inner Segment tool, typed a short command, and clicked the horizontal wall segment to modify its geometry.","intent":"Remove or split an inner portion of the selected wall.","app":"Autodesk Revit","details":"The view expanded to show adjacent rooms and doors, then ended with a selected short wall segment and temporary dimensions."},{"start_s":6824.298,"end_s":6828.721,"action":"Clicked successive wall elements in the same horizontal region, changing the selected Basic Wall type from W5 to W6.","intent":"Inspect and select neighboring wall segments.","app":"Autodesk Revit","details":"The selected cyan-highlighted wall remained in the zoomed GL floor plan."},{"start_s":6828.721,"end_s":6832.937,"action":"Selected the neighboring wall segment, briefly typed input, and left the Basic Wall W7 segment highlighted with temporary dimensions.","intent":"Continue reviewing or editing the adjacent wall geometry.","app":"Autodesk Revit","details":"The final screen shows the cyan wall selection spanning the horizontal opening area."},{"start_s":6832.937,"end_s":6842.462,"action":"Selected a wall in the GL floor plan, opened the wall type list, and changed the selected wall type from W7 to W2 while navigating the view and resizing the Revit window.","intent":"Modify the selected wall's type.","app":"Autodesk Revit","details":"Selected wall remained highlighted in the floor plan."},{"start_s":6842.462,"end_s":6847.128,"action":"Navigated to another area of the GL floor plan and kept the wall type selector open with Basic Wall: W2 selected.","intent":"Review or prepare the wall type for the selected wall.","app":"Autodesk Revit","details":"The selected horizontal wall spans the lower edge of the room plan."},{"start_s":6847.128,"end_s":6852.603,"action":"Selected the horizontal wall and changed its type from W2 to W3 using the wall type list.","intent":"Modify the selected wall's type.","app":"Autodesk Revit","details":"The wall remained highlighted and its properties showed Basic Wall W3."},{"start_s":6852.603,"end_s":6863.634,"action":"Selected another wall type, changing the highlighted wall from W3 to WALL 1, then navigated back to the earlier wall area and changed the selection to W2.","intent":"Adjust wall types while comparing wall segments in the floor plan.","app":"Autodesk Revit","details":"Wall type changes were visible in the Properties panel; no final modeling geometry change was confirmed."},{"start_s":6863.634,"end_s":6868.624,"action":"Navigated within the floor plan and changed the selected wall type from W2 to W5.","intent":"Modify the selected wall's type.","app":"Autodesk Revit","details":"The selected wall remained highlighted in cyan with Basic Wall W5 shown in Properties."},{"start_s":6868.624,"end_s":6880.802,"action":"Selected the wall, entered Align mode, typed AL, and clicked wall references to align the wall; then exited the tool and returned to the wall selection.","intent":"Align the selected wall with a reference wall or edge.","app":"Autodesk Revit","details":"The Align tool was active briefly, and the final view showed Basic Wall W7 selected with alignment dimensions and a lock indicator."},{"start_s":6880.802,"end_s":6895.527,"action":"Selected a wall in the GL floor plan, navigated and zoomed around the plan, and left a wall segment selected.","intent":"Inspect or position the wall element in the floor plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was selected; the view shifted from a close-up to the M.BED ROOM area."},{"start_s":6895.527,"end_s":6900.886,"action":"Entered Place Wall mode, selected the W3 wall type, and positioned the cursor at an endpoint to begin placing a wall.","intent":"Start drawing a new wall segment in the GL floor plan.","app":"Autodesk Revit","details":"The wall placement ribbon showed Basic Wall W3 with chain enabled."},{"start_s":6900.886,"end_s":6905.204,"action":"Changed the active wall type to W8 and began defining a wall segment from the left endpoint, then canceled the in-progress placement.","intent":"Prepare or adjust a wall placement using the W8 type.","app":"Autodesk Revit","details":"Temporary angle and distance guides appeared before the placement was canceled."},{"start_s":6905.204,"end_s":6913.532,"action":"Navigated the plan and initiated another wall placement, then opened the wall type controls.","intent":"Set up a wall type for continued modeling.","app":"Autodesk Revit","details":"The interval ended with the Revit Type Properties interface being opened."},{"start_s":6913.532,"end_s":6925.128,"action":"Renamed the wall type from W8 to W9, opened Edit Assembly, entered a thickness value of 0.55 feet, and returned to Type Properties.","intent":"Create and configure a new wall type with revised assembly thickness.","app":"Autodesk Revit","details":"The Edit Assembly dialog showed Basic Wall W9 with a 0.700-inch default total thickness before the entered value."},{"start_s":6925.128,"end_s":6935.026,"action":"Returned to the GL floor plan with W9 active, began placing a wall from the existing horizontal wall, and dragged to set a 2.000-foot segment.","intent":"Place the newly configured W9 wall in the floor plan.","app":"Autodesk Revit","details":"A temporary 2.000-foot dimension and horizontal orientation guide were visible."},{"start_s":6935.026,"end_s":6948.518,"action":"Placed a horizontal Basic Wall W9 segment across the plan, extending it toward the right-side wall, then pressed Escape to end placement.","intent":"Add a wall segment to the floor plan.","app":"Autodesk Revit","details":"Wall placement mode remained active until Escape."},{"start_s":6948.518,"end_s":6958.441,"action":"Selected the horizontal wall, reviewed it while zooming and panning around the bedroom and adjacent bathroom, then pressed Escape to clear the selection.","intent":"Inspect the newly placed wall in context.","app":"Autodesk Revit","details":"The selected wall displayed as Basic Wall W9 with a length of approximately 10.417 feet."},{"start_s":6958.441,"end_s":6968.993,"action":"Entered wall placement with W and A shortcuts, navigated to the bathroom area, and positioned the next wall endpoint while keeping the placement command active.","intent":"Begin placing another wall segment near the bathroom.","app":"Autodesk Revit","details":"The status bar indicated wall endpoint placement and loop closure options."},{"start_s":6968.993,"end_s":6973.063,"action":"Confirmed a vertical wall segment near the bathroom and shaft, then zoomed and panned to inspect its connection in the plan.","intent":"Add and inspect the bathroom-side wall segment.","app":"Autodesk Revit","details":"The new wall was highlighted in cyan and showed an approximate length of 15.850 feet."},{"start_s":6973.063,"end_s":6986.238,"action":"Pressed Escape to finish wall editing and panned slightly around the bathroom, utility, and shaft area for review.","intent":"Exit wall editing and review the modified floor plan.","app":"Autodesk Revit","details":"The wall was no longer selected in the final view."},{"start_s":6986.238,"end_s":6996.627,"action":"Zoomed out to view the bedroom, bathroom, kitchen, and utility areas, then entered Scale mode and zoomed back into the bathroom region.","intent":"Review the overall plan and adjust the view scale.","app":"Autodesk Revit","details":"The final view showed the Modify | Scale context with a prompt to click and enter the origin."},{"start_s":6996.627,"end_s":7009.77,"action":"Activated Revit and navigated the GL floor plan with clicks, panning, and zooming. Selected a wall element near the upper edge of the plan, then exited the active interaction.","intent":"Inspect or modify a wall in the GL floor plan.","app":"Autodesk Revit","details":"The view showed a close-up of the plan over a raster underlay; a wall was selected near the end of the span."},{"start_s":7009.77,"end_s":7023.907,"action":"Navigated around the GL floor plan and selected a wall near the bathroom and utility area. Exited the interaction and left the wall selected in Modify | Walls mode.","intent":"Inspect or adjust the wall layout around the bathroom and utility area.","app":"Autodesk Revit","details":"The selected element was Basic Wall: WALL 1, with the floor plan showing the M. TOILET, utility, and adjacent fixtures."},{"start_s":7023.907,"end_s":7033.829,"action":"Reviewed the selected wall and its properties while making minor view adjustments. Kept the wall selected without a clearly visible geometry change.","intent":"Review wall properties and placement in the GL floor plan.","app":"Autodesk Revit","details":"The Properties panel identified Basic Wall W2; the selected wall remained highlighted beside the bathroom and sink area."},{"start_s":7033.829,"end_s":7045.26,"action":"Zoomed and panned across the bathroom and utility region, then exited the current wall interaction and returned to wall placement mode. The view ended zoomed out to show the kitchen, utility, corridor, and bathroom.","intent":"Navigate the floor plan and prepare for placing or inspecting another wall.","app":"Autodesk Revit","details":"The final view showed Basic Wall WALL 1 in the type selector and the broader GL floor plan over the raster underlay."},{"start_s":7045.26,"end_s":7054.367,"action":"Zoomed into the kitchen and utility area and selected or positioned a wall along the boundary near the utility opening. Adjusted the view around the selected wall and exited an interaction.","intent":"Inspect or place a wall along the kitchen and utility boundary.","app":"Autodesk Revit","details":"Basic Wall W3 was active; the view showed a temporary 6.250 dimension near the wall and the kitchen/utility doorway."},{"start_s":7054.367,"end_s":7065.293,"action":"Zoomed and panned from the kitchen and utility area to a wider floor-plan view, then continued navigating toward the dining and balcony area while wall placement remained active.","intent":"Review the broader GL floor plan and position the view for further wall work.","app":"Autodesk Revit","details":"The final view showed the dining room and wide balcony, with Modify | Place Wall active and Basic Wall W3 selected."},{"start_s":7065.293,"end_s":7085.243,"action":"Switched to Autodesk Revit, navigated the GL floor plan with scrolling and clicks, and worked in wall placement/edit mode. Selected and adjusted a wall segment near the balcony and dining area, ending with the wall selected.","intent":"Modify wall geometry in the GL floor plan.","app":"Autodesk Revit","details":"The view remained focused on the balcony, dining area, and adjacent wall; the window was intermittently moved or hidden."},{"start_s":7085.243,"end_s":7089.69,"action":"Resized and refocused the Revit window, then opened the Basic Wall type selector and browsed available wall types while keeping the wall selected.","intent":"Review or change the selected wall type.","app":"Autodesk Revit","details":"The wall type list displayed W2, W3, W4, and other Basic Wall options; no confirmed type change is visible."},{"start_s":7089.69,"end_s":7099.985,"action":"Scrolled and zoomed around the selected wall, then repositioned the view from the balcony and dining area toward the lower wall intersection while keeping the wall highlighted.","intent":"Inspect and position the selected wall for editing.","app":"Autodesk Revit","details":"A temporary dimension of 6.425 feet appeared during the wall manipulation."},{"start_s":7099.985,"end_s":7109.511,"action":"Selected a horizontal wall segment, dragged its end or control to reposition it, and then exited the active wall modification state.","intent":"Adjust the location or extent of the wall segment.","app":"Autodesk Revit","details":"The selected wall was highlighted in cyan near the balcony edge; after the drag, the view showed the wall deselected."},{"start_s":7109.511,"end_s":7118.868,"action":"Entered wall placement mode, navigated and zoomed across the floor plan, and dragged or positioned a horizontal wall segment near the bedroom and balcony area.","intent":"Continue placing or aligning a wall in the GL floor plan.","app":"Autodesk Revit","details":"The wall placement ribbon showed Auto Join and Chain options; the selected preview appeared as a cyan horizontal segment."},{"start_s":7118.868,"end_s":7129.083,"action":"Scrolled and zoomed the floor plan, moved the active wall placement view across the bedroom area, and left the wall placement command active.","intent":"Position the wall placement tool for continued modeling.","app":"Autodesk Revit","details":"The final view focused on a bedroom with the wall placement crosshair visible; no completed placement is confirmed."},{"start_s":7129.083,"end_s":7138.978,"action":"Scrolled and navigated the GL floor plan, then clicked around the selected exterior wall near the bedroom and exited the active interaction.","intent":"Inspect the wall and surrounding floor-plan area.","app":"Autodesk Revit","details":"Selected Basic Wall WALL 1 remained visible in the GL plan."},{"start_s":7138.978,"end_s":7149.553,"action":"Entered Place Wall mode, panned across the upper-right portion of the GL plan, and positioned the wall-placement cursor near the exterior wall before cancelling.","intent":"Prepare or inspect a wall placement along the plan perimeter.","app":"Autodesk Revit","details":"Wall placement options, including Auto Join, were visible; no completed wall placement is evident."},{"start_s":7149.553,"end_s":7159.76,"action":"Panned and zoomed across the bathroom and bedroom area, then selected the long horizontal wall spanning the plan.","intent":"Inspect and select the wall geometry across the rooms.","app":"Autodesk Revit","details":"The selected element was shown as Basic Wall WALL 1 with updated length and area values."},{"start_s":7159.76,"end_s":7170.142,"action":"Scrolled and dragged the selected wall end while navigating across the ODU and bathroom area, adjusting the wall geometry and leaving the wall selected.","intent":"Modify the wall endpoint and alignment in the floor plan.","app":"Autodesk Revit","details":"The selected wall was identified as Basic Wall W2; the view showed its endpoint being dragged."},{"start_s":7170.142,"end_s":7179.934,"action":"Exited the prior wall adjustment, entered Place Wall mode, navigated around the bathrooms and bedroom, and positioned the cursor to start another wall segment without completing it.","intent":"Continue laying out or inspecting wall geometry around the rooms.","app":"Autodesk Revit","details":"The GL plan displayed TOILET-1, TOILET-2, and the adjacent bedroom; the status bar indicated a wall start point."},{"start_s":7179.934,"end_s":7189.967,"action":"Scrolled and selected the vertical wall between TOILET-2 and BED ROOM-2, then zoomed out to review the surrounding room layout.","intent":"Inspect the partition wall and its relationship to the adjacent rooms.","app":"Autodesk Revit","details":"The selected wall was shown as Basic Wall W2, with TOILET-1, TOILET-2, and BED ROOM-2 visible in the final view."},{"start_s":7189.967,"end_s":7199.892,"action":"Exited the current wall interaction, resized and repositioned the Revit view, then activated wall placement and navigated around the upper floor-plan area.","intent":"Prepare to place or edit a wall near the ODU shaft area.","app":"Autodesk Revit","details":"The view changed from a selected wall to Modify | Place Wall, focused near the ODU labels."},{"start_s":7199.892,"end_s":7209.737,"action":"Clicked and navigated around the upper plan, selecting the horizontal wall near the ODU shaft and then leaving the view deselected.","intent":"Inspect or adjust the wall along the upper edge of the floor plan.","app":"Autodesk Revit","details":"A cyan-highlighted horizontal wall was visible before the final deselection and zoomed view."},{"start_s":7209.737,"end_s":7227.483,"action":"Zoomed out to review the overall floor plan, then zoomed back into the bedroom and toilet area and reactivated wall placement.","intent":"Review the plan context and return to a precise wall-editing location.","app":"Autodesk Revit","details":"The floor plan showed bedrooms, toilets, dining, and drawing areas before refocusing on Toilet-1 and Toilet-2."},{"start_s":7227.483,"end_s":7242.646,"action":"Zoomed and panned through the toilet area, selected a wall segment near the lower edge of Toilet-1/Toilet-2, and continued wall-placement interaction while changing the selected wall type to W3.","intent":"Adjust a partition wall around the toilet rooms.","app":"Autodesk Revit","details":"The selected wall was highlighted cyan; the Properties panel identified it as Basic Wall W3."},{"start_s":7242.646,"end_s":7252.697,"action":"Continued panning and zooming around Toilet-1 and Toilet-2, clicked the lower wall boundary, and selected the wall segment for modification.","intent":"Refine the position or geometry of the toilet-area wall.","app":"Autodesk Revit","details":"The lower horizontal wall between the toilet area and adjacent space remained highlighted."},{"start_s":7252.697,"end_s":7262.636,"action":"Navigated upward through the toilet rooms, selected the wall area, entered dimension placement, and moved the cursor to begin referencing points for a dimension.","intent":"Add or prepare an aligned dimension for the toilet-area geometry.","app":"Autodesk Revit","details":"The final view showed Modify | Place Dimensions with the Aligned tool active over Toilet-1 and Toilet-2."},{"start_s":7262.636,"end_s":7272.606,"action":"Adjust the selected floor-plan dimension near Toilet-2 and enter 8.3 feet, changing the visible room dimension to 6 feet 0 inches by 8 feet 3 inches.","intent":"Correct the Toilet-2 room dimension annotation.","app":"Autodesk Revit","details":"Floor Plan: GL; dimension value visibly changes from 5 feet 6 inches to 6 feet 0 inches."},{"start_s":7272.606,"end_s":7283.224,"action":"Review the updated floor plan, select the bedroom dimension, and zoom out to inspect more of the layout.","intent":"Check the updated dimensions and surrounding plan context.","app":"Autodesk Revit","details":"A selected dimension shows 8.258 feet and the view is zoomed out substantially."},{"start_s":7283.224,"end_s":7292.873,"action":"Pan and zoom across the floor plan, then select a wall near the shaft area and enter wall modification mode.","intent":"Navigate to and inspect a wall element near the shaft.","app":"Autodesk Revit","details":"The selected element is a Basic Wall W2."},{"start_s":7292.873,"end_s":7303.961,"action":"Continue viewing the shaft-area wall at close range, then exit the wall-edit interaction and select the inner segment/delete-inner-segment tool.","intent":"Modify or prepare to modify the selected wall geometry.","app":"Autodesk Revit","details":"The ribbon shows Delete Inner Segment while the shaft and adjacent wall remain visible."},{"start_s":7303.961,"end_s":7320.37,"action":"Switch from the GL floor plan to the 3D view and inspect the building model by zooming and panning.","intent":"Review the building geometry in three dimensions.","app":"Autodesk Revit","details":"The 3D view displays the multi-room building walls; a wall is initially highlighted and then deselected."},{"start_s":7320.37,"end_s":7330.241,"action":"Return to Floor Plan: GL, zoom and pan across the apartment layouts, and inspect the broader arrangement of units and shared areas.","intent":"Review the overall floor-plan composition after the model inspection.","app":"Autodesk Revit","details":"The view moves from a close apartment plan to a wider multi-unit layout."},{"start_s":7330.241,"end_s":7342.782,"action":"Selected and adjusted a wall segment beside the FHC and Lobby Press. Shaft areas, then panned the floor plan downward along the corridor.","intent":"Refine the wall layout around the shaft and corridor.","app":"Autodesk Revit","details":"Wall remains selected in the GL floor plan; dimensions and grips are visible."},{"start_s":7342.782,"end_s":7352.534,"action":"Exited the wall edit state, selected the Delete Inner Segment tool, and panned downward to review the stair and shaft area.","intent":"Inspect or prepare to remove an inner wall segment near the stair shaft.","app":"Autodesk Revit","details":"The GL floor plan shows the stair and Lobby Press. Shaft with the Delete Inner Segment mode active."},{"start_s":7352.534,"end_s":7362.209,"action":"Selected the wall beside the stair and Lobby Press. Shaft, entered wall editing, and adjusted the selected segment while panning slightly.","intent":"Modify the wall separating the stair and shaft spaces.","app":"Autodesk Revit","details":"A cyan wall segment is selected with temporary dimensions and grips."},{"start_s":7362.209,"end_s":7372.813,"action":"Panned and zoomed around the selected wall beside the Lobby and Staircase Press. Shafts, reviewing its alignment against the corridor and stair opening.","intent":"Check the wall position and adjacent opening in the floor plan.","app":"Autodesk Revit","details":"The selected wall remains highlighted while the view shifts closer to the stair and corridor."},{"start_s":7372.813,"end_s":7385.108,"action":"Scrolled extensively to zoom out and review the broader floor plan, moving from the stair and shaft detail to a multi-unit layout view.","intent":"Review the wall location in the context of the surrounding floor plan.","app":"Autodesk Revit","details":"The final view shows multiple rooms and units, including the central stair and shaft area."},{"start_s":7385.108,"end_s":7395.767,"action":"Panned back to the corridor and selected the wall near the Lobby Press. Shaft; then activated Place Wall and positioned the wall endpoint along the shaft boundary.","intent":"Continue laying out or extending a wall beside the lobby shaft.","app":"Autodesk Revit","details":"Revit is in Modify | Place Wall mode with Basic Wall W2 active and a preview segment visible."},{"start_s":7395.767,"end_s":7413.96,"action":"Interacted with the Revit floor plan, navigating and zooming around the stair, shaft, corridor, lobby, and lift areas before opening the Save As workflow.","intent":"Prepare to save the Revit project under a new file name.","app":"Autodesk Revit","details":"The floor plan view changed from a close-up to a wider building view; the span ended at the Save As transition."},{"start_s":7413.96,"end_s":7426.962,"action":"Worked in the Save As dialog, changed the destination from Desktop to Downloads, selected the file-name field, and entered “PROJECT 11” before confirming.","intent":"Save a copy of the Revit project as PROJECT 11.","app":"Autodesk Revit","details":"The dialog displayed Revit project files in Downloads while the file name was edited."},{"start_s":7426.962,"end_s":7433.346,"action":"Returned to Revit and waited while the project title updated from Project1 to PROJECT 11; briefly issued a save command.","intent":"Complete and verify the renamed project save.","app":"Autodesk Revit","details":"The title bar showed PROJECT 11 and the floor plan remained visible."},{"start_s":7433.346,"end_s":7447.164,"action":"Reviewed the PROJECT 11 floor plan, zooming out to inspect a broader building layout and then zooming back toward the central stair, shafts, corridor, and adjacent rooms.","intent":"Inspect the saved project layout at different scales.","app":"Autodesk Revit","details":"The view changed from a broad multi-unit plan to a close-up around the central circulation area."},{"start_s":7447.164,"end_s":7456.993,"action":"Navigated across the floor plan with repeated middle-button panning and zooming, moving from the central circulation area toward bedrooms, bathrooms, dining, and living spaces.","intent":"Review other areas of the building floor plan.","app":"Autodesk Revit","details":"The visible view shifted across multiple labeled rooms and apartment areas."},{"start_s":7456.993,"end_s":7467.128,"action":"Continued panning and zooming through the PROJECT 11 floor plan, ending on a wider overview showing the central lobby, stairs, lifts, and surrounding apartment units.","intent":"Survey the overall floor plan layout.","app":"Autodesk Revit","details":"No specific model elements were edited; navigation only changed the view scale and position."},{"start_s":7467.128,"end_s":7487.128,"action":"Clicked and scrolled the Revit floor plan, slightly changing the view of the building layout.","intent":"Adjust the floor-plan view for inspection.","app":"Autodesk Revit","details":null},{"start_s":7487.128,"end_s":7507.128,"action":"Remained idle while the Revit GL floor plan stayed visible.","intent":"Review the displayed floor plan.","app":"Autodesk Revit","details":null},{"start_s":7507.128,"end_s":7527.128,"action":"Remained idle while viewing the Revit GL floor plan.","intent":"Review the displayed floor plan.","app":"Autodesk Revit","details":null},{"start_s":7527.128,"end_s":7537.657,"action":"Scrolled and clicked around the floor plan, zooming into the lobby, stairs, and adjacent rooms; then further zoomed to a close-up of a wall and door-swing area.","intent":"Inspect a specific area of the floor plan in greater detail.","app":"Autodesk Revit","details":null},{"start_s":7537.657,"end_s":7550.458,"action":"Pressed Escape and selected the raster image, then entered Scale mode and adjusted the close-up view while the raster image remained selected.","intent":"Manipulate and inspect the imported raster image underlay.","app":"Autodesk Revit","details":"The contextual ribbon showed Modify | Raster Images and then Modify | Scale."},{"start_s":7550.458,"end_s":7554.891,"action":"Switched back to Revit, activated Place Wall with Basic Wall W2 selected, and opened the Type Properties context while positioned over the close-up plan.","intent":"Prepare to place or configure a wall in the floor plan.","app":"Autodesk Revit","details":"The wall tool showed Finish Face: Exterior, height 9.843', and top constraint Up to level: FFL."},{"start_s":7554.891,"end_s":7560.2,"action":"Opened the Basic Wall W2 Edit Assembly dialog, selected text, and returned to the Type Properties window.","intent":"Review the wall type's layered assembly and parameters.","app":"Autodesk Revit","details":"Type W2; assembly shows Brick, Common with 0.570-inch thickness."},{"start_s":7560.2,"end_s":7567.893,"action":"Closed the W2 dialogs, selected another wall type, opened its Type Properties, entered Edit Assembly, and returned to Type Properties.","intent":"Review the next wall type's assembly and parameters.","app":"Autodesk Revit","details":"Type W3; displayed width is 0.375 inches."},{"start_s":7567.893,"end_s":7576.809,"action":"Closed the W3 dialogs, selected another wall type, opened Type Properties, entered Edit Assembly, and returned to Type Properties.","intent":"Review the next wall type's assembly and parameters.","app":"Autodesk Revit","details":"Type W5; displayed width is 0.750 inches."},{"start_s":7576.809,"end_s":7581.098,"action":"Closed Type Properties, opened the wall-type dropdown, and selected W6 for wall placement.","intent":"Choose the next wall type for placement or inspection.","app":"Autodesk Revit","details":"Wall placement mode remained active with W6 selected."},{"start_s":7581.098,"end_s":7588.408,"action":"Opened the W6 type naming dialog, selected the existing name, dismissed it, opened Edit Assembly, and returned to Type Properties.","intent":"Inspect the W6 type and its assembly settings.","app":"Autodesk Revit","details":"Type W6; the Name dialog showed the existing name W6, and width is 0.800 inches."},{"start_s":7588.408,"end_s":7596.599,"action":"Closed the W6 dialogs, selected another wall type, opened Type Properties, and entered Edit Assembly before returning to Type Properties.","intent":"Review the next wall type's assembly and parameters.","app":"Autodesk Revit","details":"Type W7; displayed width is 0.730 inches."},{"start_s":7596.599,"end_s":7604.92,"action":"Opened Revit wall type properties for Basic Wall W7, opened Edit Assembly, selected text, and closed the assembly and properties dialogs.","intent":"Review the W7 wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W7 with width 0.730 and Brick, Common structural material."},{"start_s":7604.92,"end_s":7613.37,"action":"Returned to the floor plan, selected Basic Wall W8 from the wall type list, opened Type Properties and Edit Assembly, then closed the dialogs.","intent":"Review the W8 wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W8 with width 0.700 and Brick, Common structural material."},{"start_s":7613.37,"end_s":7621.796,"action":"Selected Basic Wall W9, opened Type Properties and Edit Assembly, briefly selected assembly text, and closed both dialogs.","intent":"Review the W9 wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W9 with width 0.550 and Brick, Common structural material."},{"start_s":7621.796,"end_s":7632.072,"action":"Navigated the GL floor plan with scroll and middle-button pan actions, then clicked in the drawing while remaining in Place Wall mode for Basic Wall W9.","intent":"Navigate to a wall placement area in the floor plan.","app":"Autodesk Revit","details":"The view moved from a close-up to a broader area of the plan."},{"start_s":7632.072,"end_s":7642.568,"action":"Continued panning and zooming around the GL floor plan, bringing the electrical room, shafts, lobby, and drawing room into view while keeping Basic Wall W9 active.","intent":"Position the floor plan for wall placement.","app":"Autodesk Revit","details":"No completed wall placement is visibly confirmed."},{"start_s":7642.568,"end_s":7651.807,"action":"Zoomed and panned around the Electrical Room and adjacent shafts, pressed Escape, and selected a wall segment; the view ended with the wall highlighted and wall modification tools visible.","intent":"Inspect or select an existing wall near the electrical room.","app":"Autodesk Revit","details":"The selected wall was highlighted cyan; Edit Profile and other wall tools were available."},{"start_s":7651.807,"end_s":7661.185,"action":"Scrolled and zoomed around the FHC Shaft:02 area, exited a transient command, and clicked to position the wall tool near the shaft.","intent":"Position the view and wall placement cursor for modeling.","app":"Autodesk Revit","details":"Floor Plan: GL; Basic Wall W9 with Place Wall active."},{"start_s":7661.185,"end_s":7670.493,"action":"Scrolled and adjusted the view around the FHC Shaft:02 and adjacent doorway, then clicked to continue positioning the wall endpoint.","intent":"Align the wall placement with nearby plan geometry.","app":"Autodesk Revit","details":"Wall placement remained active; temporary dimensions and door geometry were visible."},{"start_s":7670.493,"end_s":7680.521,"action":"Panned and zoomed across the shaft and Electrical Room area, clicked along the plan, and continued positioning the wall.","intent":"Trace or align a wall segment against the floor-plan layout.","app":"Autodesk Revit","details":"Place Wall mode remained active with the view moving from the shaft area toward the Electrical Room."},{"start_s":7680.521,"end_s":7690.143,"action":"Clicked and panned around the Staircase Press. Shaft and adjacent wall geometry, then exited the transient interaction.","intent":"Continue locating the wall endpoint near the shaft boundary.","app":"Autodesk Revit","details":"The view became highly zoomed on wall and shaft edges; no completed wall segment was clearly visible."},{"start_s":7690.143,"end_s":7699.735,"action":"Scrolled and selected a horizontal wall segment near the Staircase Press. Shaft, briefly entering wall modification, then returned to wall placement after the view changed.","intent":"Inspect or continue editing wall geometry in the shaft area.","app":"Autodesk Revit","details":"A wall was highlighted cyan with properties showing Basic Wall W9 before the interface returned to Place Wall."},{"start_s":7699.735,"end_s":7709.76,"action":"Scrolled toward the right side of the Staircase Press. Shaft and clicked near its upper-right boundary, positioning the wall endpoint with temporary angular and length dimensions visible.","intent":"Place or align the next wall segment along the shaft boundary.","app":"Autodesk Revit","details":"Place Wall mode remained active; the endpoint cursor and temporary dimensions were visible."},{"start_s":7709.76,"end_s":7719.759,"action":"Clicked and scrolled around the close-up GL floor plan while placing a Basic Wall, then pressed Escape and briefly hid and restored the application window.","intent":"Position or adjust the wall placement view.","app":"Autodesk Revit","details":"Floor Plan: GL; wall placement mode was active."},{"start_s":7719.759,"end_s":7729.808,"action":"Pressed Escape, resized and repositioned the Revit window, then scrolled and clicked around the GL floor plan near the Staircase Press. Shaft and Electrical Room areas.","intent":"Navigate and inspect the floor plan while exiting the active placement operation.","app":"Autodesk Revit","details":"The view ended on a broader close-up showing the Electrical Room and adjacent plan elements."},{"start_s":7729.808,"end_s":7739.078,"action":"Resized and repositioned the window, clicked the plan, and activated the Scale tool; displayed temporary scale measurements before pressing Escape and returning to wall placement mode.","intent":"Measure or adjust the close-up floor plan geometry.","app":"Autodesk Revit","details":"Temporary measurements included approximately 90 degrees and 0.500 feet."},{"start_s":7739.078,"end_s":7750.068,"action":"Pressed Escape, resized and repositioned the window, clicked the plan, and continued the Scale operation to show a temporary horizontal measurement of about 0.521 feet.","intent":"Measure the spacing between nearby plan elements.","app":"Autodesk Revit","details":"The view remained zoomed into the central wall or opening area."},{"start_s":7750.068,"end_s":7756.531,"action":"Selected the raster image, adjusted the view with scrolling, then clicked the plan and activated Scale, showing a temporary measurement of about 0.271 feet.","intent":"Inspect or measure the raster-backed floor plan near the wall edge.","app":"Autodesk Revit","details":"Raster image properties were visible before the Scale tool was activated."},{"start_s":7756.531,"end_s":7766.027,"action":"Pressed Escape, resized the Revit window, and lightly scrolled while leaving the raster image selected in the GL floor plan.","intent":"Exit the temporary scale operation and reposition the view.","app":"Autodesk Revit","details":"The close-up remained centered on the dark wall region beside the raster image."},{"start_s":7766.027,"end_s":7775.548,"action":"Navigated the GL floor plan by scrolling and clicking, then entered Scale mode and adjusted the zoomed plan view.","intent":"Refine the floor-plan view and scale context around the selected detail.","app":"Autodesk Revit","details":"The view ended extremely zoomed in with Modify | Scale active."},{"start_s":7775.548,"end_s":7789.567,"action":"Exited the active command through repeated Escape presses, repositioned the Revit window, and selected the wall-placement tool.","intent":"Reset the active editing state and prepare to place a wall.","app":"Autodesk Revit","details":"The view ended in Modify | Place Wall mode with Basic Wall W9 selected."},{"start_s":7789.567,"end_s":7798.48,"action":"Opened the wall type controls, viewed Type Properties for Basic Wall WALL 1, opened Edit Assembly, and returned to the Type Properties dialog.","intent":"Inspect the construction assembly and type parameters for the selected wall.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall WALL 1 and construction parameters including width 0.650."},{"start_s":7798.48,"end_s":7807.176,"action":"Scrolled and clicked across the zoomed floor plan while remaining in Place Wall mode, then moved the view to a wall and doorway area.","intent":"Navigate to the intended wall-placement location.","app":"Autodesk Revit","details":"The wall tool remained active with WALL 1 selected; no completed wall placement is visible."},{"start_s":7807.176,"end_s":7816.928,"action":"Scrolled to another close-up, clicked to begin or continue wall placement, pressed Escape, and selected the wall geometry for modification.","intent":"Adjust the wall-placement operation and inspect the resulting wall element.","app":"Autodesk Revit","details":"The view ended with a wall highlighted and Modify | Walls active."},{"start_s":7816.928,"end_s":7826.785,"action":"Clicked around the selected wall and nearby plan detail, used Escape and scrolling to exit or reset commands, and left the view focused on the raster-backed floor plan.","intent":"Review and reposition the edited wall area.","app":"Autodesk Revit","details":"The final view showed the raster image with a tooltip identifying the floor-plan raster image."},{"start_s":7826.785,"end_s":7846.571,"action":"Entered Place Wall mode, navigated and zoomed around the GL floor plan, and positioned the wall cursor near an endpoint while previewing a wall segment.","intent":"Continue placing or aligning a wall in the floor plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active; the view ended with an endpoint-and-horizontal snap indicator."},{"start_s":7846.571,"end_s":7853.975,"action":"Exited the active wall placement interaction, zoomed and panned out to review the GL floor plan, and clicked in the plan view.","intent":"Review the wall location in the broader floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up to a larger floor-plan overview."},{"start_s":7853.975,"end_s":7862.808,"action":"Zoomed into the plan, selected a wall type from the wall type list, opened Type Properties, and opened the Edit Assembly dialog before returning toward the type settings.","intent":"Inspect or modify the selected wall type assembly.","app":"Autodesk Revit","details":"The selected type was shown as Basic Wall W2 before the assembly editor opened."},{"start_s":7862.808,"end_s":7870.503,"action":"Selected another wall type, opened its Type Properties, and opened Edit Assembly to inspect the wall layer structure, then returned to Type Properties.","intent":"Compare or adjust the construction of a wall type.","app":"Autodesk Revit","details":"Type Properties displayed Basic Wall W3 with a 0.375' width; the assembly editor was opened."},{"start_s":7870.503,"end_s":7878.578,"action":"Selected W3 in the wall type list and scrolled through the available wall types while remaining in Place Wall mode.","intent":"Choose a wall type for the ongoing wall placement.","app":"Autodesk Revit","details":"The type list showed W6, W7, W8, W9, WALL 1, and other wall types."},{"start_s":7878.578,"end_s":7884.574,"action":"Opened Type Properties for WALL 1, opened Edit Assembly to review its single Brick, Common layer, and returned to Type Properties.","intent":"Inspect the construction parameters of WALL 1.","app":"Autodesk Revit","details":"Edit Assembly showed WALL 1 at 0.650' total thickness with a Brick, Common structural layer."},{"start_s":7884.574,"end_s":7894.624,"action":"Activated the wall placement tool in the GL floor plan and left the view zoomed into the shaft and stair areas.","intent":"Prepare to place a wall on the floor plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active; no wall placement was completed."},{"start_s":7894.624,"end_s":7902.526,"action":"Selected the wall type, opened Type Properties, entered Edit Assembly, and returned to the Type Properties dialog for Basic Wall W4.","intent":"Inspect or modify the wall assembly settings.","app":"Autodesk Revit","details":"Type Properties visibly showed Basic Wall W4 and its construction parameters."},{"start_s":7902.526,"end_s":7911.541,"action":"Worked in wall placement mode, panned and zoomed around the shaft and stair area, and moved the wall endpoint while Revit displayed temporary angle and distance guides.","intent":"Position a wall endpoint in the floor plan.","app":"Autodesk Revit","details":"The status bar indicated wall endpoint placement and spacebar orientation controls."},{"start_s":7911.541,"end_s":7921.804,"action":"Exited the active wall-placement interaction, zoomed out to review the broader GL floor plan, and panned across the electrical room, shafts, lobby, and adjacent rooms.","intent":"Review the floor plan context around the wall location.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader plan review."},{"start_s":7921.804,"end_s":7926.924,"action":"Navigated back toward the shaft area, selected a wall, and entered wall modification mode with the wall highlighted in cyan.","intent":"Select and modify an existing wall.","app":"Autodesk Revit","details":"The selected element was Basic Wall W9; Modify | Walls and Edit Profile controls were visible."},{"start_s":7926.924,"end_s":7942.45,"action":"Kept Basic Wall W9 selected in Modify | Walls mode, then pressed Escape and left the view unchanged.","intent":"Exit the wall modification state without an evident edit.","app":"Autodesk Revit","details":"No visible geometry change occurred before the interval ended."},{"start_s":7942.45,"end_s":7952.167,"action":"Navigated the Revit floor plan by panning and zooming across the upper rooms, then clicked within the drawing area.","intent":"Inspect the floor plan and reposition the view.","app":"Autodesk Revit","details":"Floor Plan: GL remained active."},{"start_s":7952.167,"end_s":7962.686,"action":"Exited the active interaction, adjusted the Revit window, and continued panning and zooming. Entered the Scale tool and selected points in the drawing area, leaving the view in scale mode.","intent":"Adjust the view and begin scaling a selected plan element or image.","app":"Autodesk Revit","details":"The contextual ribbon showed Modify | Scale."},{"start_s":7962.686,"end_s":7970.933,"action":"Canceled the prior operation, selected the raster image, adjusted the view, and clicked to define a scale point while the image remained selected.","intent":"Modify or scale the raster background image.","app":"Autodesk Revit","details":"The Properties panel identified a raster image and the ribbon showed Modify | Raster Images before Scale mode resumed."},{"start_s":7970.933,"end_s":7981.697,"action":"Canceled and adjusted the view through repeated zooming and panning, moving from a close-up of the raster image to a broader floor-plan view, then clicked within the drawing.","intent":"Inspect the raster-backed floor plan at different zoom levels.","app":"Autodesk Revit","details":"The broader view showed labeled rooms including Drawing, Bed Room-1, Bed Room-2, Dining, Kitchen, and toilets."},{"start_s":7981.697,"end_s":7991.648,"action":"Typed “WA,” adjusted the Revit window, selected the raster image, and continued zooming and clicking while the Scale tool remained active.","intent":"Invoke a wall-related command or continue positioning/scaling the plan image.","app":"Autodesk Revit","details":"The floor plan briefly displayed hatched wall graphics; the contextual ribbon still showed Modify | Scale."},{"start_s":7991.648,"end_s":8008.034,"action":"Continued selecting scale points and adjusting the Revit window, then switched to Place Wall mode with Basic Wall W4 selected and the location line set to Finish Face: Exterior.","intent":"Begin drawing a wall on the floor plan.","app":"Autodesk Revit","details":"The final screen showed Modify | Place Wall with Chain enabled and wall placement constraints visible."},{"start_s":8008.034,"end_s":8016.022,"action":"Opened the Basic Wall W2 Type Properties, entered and reviewed its Edit Assembly dialog, then closed the dialogs to return to the GL floor plan.","intent":"Review the wall type assembly and properties.","app":"Autodesk Revit","details":"Basic Wall type W2 was displayed."},{"start_s":8016.022,"end_s":8020.898,"action":"Closed Type Properties, returned to the wall placement view, and selected Basic Wall W2 from the type list.","intent":"Return to wall placement and choose a wall type.","app":"Autodesk Revit","details":"The GL floor plan remained in Modify | Place Wall mode."},{"start_s":8020.898,"end_s":8025.308,"action":"Selected Basic Wall W3, opened its Type Properties, entered Edit Assembly to review the layer structure, and returned to Type Properties.","intent":"Review the assembly definition for wall type W3.","app":"Autodesk Revit","details":"The Edit Assembly dialog showed Basic Wall W3 with a Brick, Common structure layer."},{"start_s":8025.308,"end_s":8033.876,"action":"Closed the W3 dialogs, selected Basic Wall W4, and opened its Type Properties and Edit Assembly dialog before returning to Type Properties.","intent":"Review the assembly definition for wall type W4.","app":"Autodesk Revit","details":"Basic Wall W4 Type Properties showed a width of 1.000."},{"start_s":8033.876,"end_s":8041.807,"action":"Closed the W4 dialogs, selected Basic Wall W5, and opened its Type Properties and Edit Assembly dialog before returning to Type Properties.","intent":"Review the assembly definition for wall type W5.","app":"Autodesk Revit","details":"Basic Wall W5 Type Properties showed a width of 0.750."},{"start_s":8041.807,"end_s":8046.797,"action":"Closed the W5 dialogs, selected Basic Wall W6 from the type list, and opened its Type Properties.","intent":"Advance to the next wall type for inspection.","app":"Autodesk Revit","details":"Basic Wall W6 was selected in the GL floor plan's wall placement controls."},{"start_s":8046.797,"end_s":8051.648,"action":"Opened the Basic Wall W6 Edit Assembly dialog, closed it, and returned to the GL floor plan in Place Wall mode.","intent":"Review the wall assembly before placing a wall.","app":"Autodesk Revit","details":"Edit Assembly showed Basic Wall type W6 with Brick, Common structure."},{"start_s":8051.648,"end_s":8058.716,"action":"Opened the wall type selector, changed the active wall from W6 to W7, and opened the W7 Edit Assembly dialog before returning toward Type Properties.","intent":"Select and inspect the next wall type.","app":"Autodesk Revit","details":"W7 Edit Assembly displayed a 0.730-inch Brick, Common structure."},{"start_s":8058.716,"end_s":8069.078,"action":"Selected W8 from the wall type list, opened Type Properties, and reviewed the W8 parameters.","intent":"Inspect the next wall type's properties.","app":"Autodesk Revit","details":"Type Properties showed System Family: Basic Wall, type W8."},{"start_s":8069.078,"end_s":8078.007,"action":"Opened the wall type list, selected W9, opened its Edit Assembly dialog, and returned to Type Properties.","intent":"Inspect the W9 wall assembly.","app":"Autodesk Revit","details":"W9 Edit Assembly showed a 0.550-inch Brick, Common structure."},{"start_s":8078.007,"end_s":8088.251,"action":"Selected W8 again and navigated the GL floor plan with repeated scroll and middle-button view adjustments, changing the visible zoomed area.","intent":"Navigate the floor plan to position the wall placement view.","app":"Autodesk Revit","details":"The active command remained Modify | Place Wall."},{"start_s":8088.251,"end_s":8099.694,"action":"Continued panning and zooming the GL floor plan with middle-button clicks and scrolls, ending on a wider view around BED ROOM-1 and the adjacent corridor.","intent":"Adjust the view while preparing wall placement.","app":"Autodesk Revit","details":"No wall placement click was completed; the view ended with wall graphics and room labels visible."},{"start_s":8099.694,"end_s":8109.718,"action":"Exited the active command, resized or repositioned the Revit window, and zoomed or panned the GL floor plan to a wider view.","intent":"Adjust the floor-plan view for inspection.","app":"Autodesk Revit","details":"GL floor plan remained open; the view changed from a close-up to a broader plan showing multiple rooms."},{"start_s":8109.718,"end_s":8119.475,"action":"Panned and zoomed the GL floor plan around the central rooms, then exited the active interaction.","intent":"Navigate the floor plan to inspect another area.","app":"Autodesk Revit","details":"The view remained on the furnished GL floor plan, centered around bedrooms, drawing, dining, and kitchen areas."},{"start_s":8119.475,"end_s":8132.703,"action":"Zoomed and panned into a furnished room, selected the Scale tool, and then switched to the Place Wall command.","intent":"Prepare to modify the floor plan near the selected room area.","app":"Autodesk Revit","details":"The close-up showed a sofa and wall edge; the ribbon changed from Modify | Scale to Modify | Place Wall."},{"start_s":8132.703,"end_s":8137.094,"action":"Changed the wall type selections in the Place Wall tool, switching from Basic Wall W8 to W9 while keeping wall placement active.","intent":"Choose a wall type before drawing.","app":"Autodesk Revit","details":"The Properties palette showed Basic Wall W9 and the status bar prompted for the wall start point."},{"start_s":8137.094,"end_s":8141.625,"action":"Opened Type Properties, opened the wall assembly editor for Basic Wall WALL 1, reviewed the brick layer, and returned to the Type Properties dialog.","intent":"Inspect the construction layers and parameters of the wall type.","app":"Autodesk Revit","details":"Edit Assembly showed a 0.650-inch Brick, Common structural layer; Type Properties displayed WALL 1 parameters."},{"start_s":8141.625,"end_s":8151.81,"action":"Returned to the GL floor plan, remained in Place Wall mode, and panned or zoomed to a doorway area while positioning the wall cursor; no completed wall placement was visible.","intent":"Position the view and prepare to draw a wall segment.","app":"Autodesk Revit","details":"The final view showed a doorway with temporary placement graphics and angle/distance guides."},{"start_s":8151.81,"end_s":8161.291,"action":"Clicked repeatedly in the Revit floor plan while the Place Wall tool remained active, then scrolled without visible displacement.","intent":"Attempt to place or adjust wall segments in the floor plan.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active; the view showed furnished rooms and a bed area."},{"start_s":8161.291,"end_s":8171.431,"action":"Pressed Escape and interacted with the Revit window while it repeatedly hid, reappeared, moved, and resized; ended with the raster image selected and the Scale tool active.","intent":"Exit the wall-placement operation and select or inspect the floor-plan raster image.","app":"Autodesk Revit","details":"The raster image properties showed dimensions and scale values; no completed wall placement was visible."},{"start_s":8171.431,"end_s":8181.054,"action":"Pressed Escape, clicked and scrolled around the selected raster image, and continued moving and resizing the Revit window; left the raster image selected in a shifted view.","intent":"Inspect or reposition the floor-plan raster image.","app":"Autodesk Revit","details":"The view shifted across the raster image from a wood-textured area to gray and white regions."},{"start_s":8181.054,"end_s":8192.489,"action":"Clicked and scrolled in the floor plan while the Scale tool was active, then pressed Escape several times and typed WA during window transitions.","intent":"Attempt to scale or work with geometry in the floor plan, then cancel the active operation.","app":"Autodesk Revit","details":"Temporary scale graphics and angle/distance guides were visible over the floor plan."},{"start_s":8192.489,"end_s":8200.094,"action":"Switched back to Revit, opened Type Properties for the Basic Wall type WALL 1, opened and closed Edit Assembly, and returned to the Type Properties dialog.","intent":"Inspect the construction assembly and parameters for the WALL 1 wall type.","app":"Autodesk Revit","details":"Type Properties showed System Family: Basic Wall, type WALL 1, with width 0.650 and structural material Brick, Common."},{"start_s":8200.094,"end_s":8209.119,"action":"Opened Type Properties again for a different Basic Wall type, entered and exited Edit Assembly, and left the Type Properties dialog open.","intent":"Inspect the construction assembly and parameters for the second wall type.","app":"Autodesk Revit","details":"The dialog showed type W2 with width 0.570 and structural material Brick, Common."},{"start_s":8209.119,"end_s":8216.945,"action":"Opened Revit wall Type Properties for Basic Wall W3, opened Edit Assembly from the Structure parameter, reviewed it, and returned to the Type Properties dialog.","intent":"Review the wall type assembly and parameters.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W3."},{"start_s":8216.945,"end_s":8224.151,"action":"Opened the wall type selector, selected Basic Wall W4, opened its Type Properties and Edit Assembly dialogs, reviewed the assembly, and returned to Type Properties.","intent":"Review another wall type assembly and parameters.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W4."},{"start_s":8224.151,"end_s":8231.117,"action":"Selected Basic Wall W5 from the wall type list, opened Type Properties and Edit Assembly, reviewed the assembly, and returned to Type Properties.","intent":"Review the W5 wall type definition.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W5 with width 0.750."},{"start_s":8231.117,"end_s":8237.896,"action":"Selected Basic Wall W6, opened its Type Properties and Edit Assembly dialogs, reviewed the assembly, and returned to Type Properties.","intent":"Review the W6 wall type definition.","app":"Autodesk Revit","details":"Type Properties showed Basic Wall W6 with width 0.800."},{"start_s":8237.896,"end_s":8247.508,"action":"Exited the wall type dialog, adjusted the Revit window and view, activated the Scale tool, and selected the raster image in the floor plan.","intent":"Return to the floor plan and adjust the view or selected image.","app":"Autodesk Revit","details":"The selected raster image properties became visible."},{"start_s":8247.508,"end_s":8266.242,"action":"Navigated and zoomed the floor plan with middle-button panning and scrolling, then exited the active scale operation and selected Basic Wall W6 to return to wall placement mode.","intent":"Navigate the floor plan and resume wall placement.","app":"Autodesk Revit","details":"The final view showed Modify | Place Wall with Basic Wall W6 selected."},{"start_s":8266.242,"end_s":8273.815,"action":"Opened Basic Wall type properties for wall type W8, briefly entered Edit Assembly, then returned to the Type Properties dialog.","intent":"Review the wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties shows System Family: Basic Wall, type W8, with width 0.700 and exterior function."},{"start_s":8273.815,"end_s":8282.689,"action":"Exited Type Properties and activated Place Wall for Basic Wall W8, then panned and zoomed around the GL floor plan near the wall layout.","intent":"Prepare to place or inspect a wall in the floor plan.","app":"Autodesk Revit","details":"The view remained on Floor Plan: GL with Place Wall active and Finish Face: Exterior selected."},{"start_s":8282.689,"end_s":8292.974,"action":"Continued navigating the GL floor plan, entered wall placement and closed-loop drawing mode, then selected a wall near the toilet and shaft area.","intent":"Position and modify a wall element in the floor plan.","app":"Autodesk Revit","details":"The selected wall is highlighted across the plan near the M. TOILET and Shaft annotations."},{"start_s":8292.974,"end_s":8303.589,"action":"Panned and zoomed around the shaft and toilet area, exited the active wall operation, and selected the raster underlay image.","intent":"Inspect the floor plan underlay and nearby modeled elements.","app":"Autodesk Revit","details":"Raster Images properties are visible for the selected background image."},{"start_s":8303.589,"end_s":8314.63,"action":"Entered Scale mode, adjusted the view around the toilet and underlay, exited the command, and reactivated Place Wall with Basic Wall W8.","intent":"Scale or inspect the underlay before continuing wall placement.","app":"Autodesk Revit","details":"The view remains tightly zoomed on the raster floor plan near the M. TOILET label."},{"start_s":8314.63,"end_s":8320.492,"action":"Opened Type Properties for Basic Wall type W9, briefly entered Edit Assembly, and returned to the Type Properties dialog.","intent":"Review the alternate wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties shows System Family: Basic Wall, type W9, with width 0.550 and exterior function."},{"start_s":8320.492,"end_s":8331.181,"action":"Activated the Wall placement tool, zoomed and panned around the floor plan near the M. Toilet, and positioned the wall preview without completing a wall.","intent":"Position a new wall in the floor plan.","app":"Autodesk Revit","details":"Basic Wall W9 was active with Finish Face: Exterior location line."},{"start_s":8331.181,"end_s":8341.051,"action":"Cancelled and re-entered the wall placement interaction, then zoomed and panned closely around the sink and adjacent wall area while moving the wall endpoint preview.","intent":"Adjust the intended wall placement location.","app":"Autodesk Revit","details":"The view ended highly zoomed in with the wall placement tool still active."},{"start_s":8341.051,"end_s":8359.447,"action":"Cancelled the close-up placement interaction, selected the floor plan view, and briefly entered Scale mode before returning to wall placement.","intent":"Inspect or adjust the plan view and continue wall editing.","app":"Autodesk Revit","details":"The view remained zoomed into the wall and sink area; no completed wall was visible."},{"start_s":8359.447,"end_s":8367.238,"action":"Opened the Basic Wall type controls, opened Edit Assembly to review the WALL 1 layer structure, then returned to Type Properties and closed the dialogs.","intent":"Review the construction layers and properties of the selected wall type.","app":"Autodesk Revit","details":"Edit Assembly showed WALL 1 with a 0.650-inch Brick, Common structural layer."},{"start_s":8367.238,"end_s":8371.991,"action":"Opened the wall type selector and scrolled through the available Basic Wall types, leaving WALL 1 highlighted.","intent":"Choose or inspect an alternate wall type for placement.","app":"Autodesk Revit","details":"The type list displayed W4 through W9 and WALL 1, along with additional wall assemblies."},{"start_s":8371.991,"end_s":8378.028,"action":"Selected Basic Wall W8, opened its Type Properties and Edit Assembly dialogs, reviewed the layer structure, and closed the assembly view.","intent":"Inspect the construction properties of Basic Wall W8.","app":"Autodesk Revit","details":"Edit Assembly showed W8 with a 0.700-inch Brick, Common structural layer."},{"start_s":8378.028,"end_s":8386.335,"action":"Opened Revit wall type controls, changed the selected basic wall type, and opened Type Properties followed by Edit Assembly before returning to the type dialog.","intent":"Inspect or adjust the selected wall type assembly.","app":"Autodesk Revit","details":"The selected wall type changed from W8 to W7, and the dialogs were opened and closed without a clearly visible parameter edit."},{"start_s":8386.335,"end_s":8390.435,"action":"Opened the wall type selector, browsed the available basic wall types, selected W6, and opened Type Properties.","intent":"Choose a different basic wall type for wall placement.","app":"Autodesk Revit","details":"The type list visibly included W7, W8, W9, WALL 1, and other wall types; W6 was selected."},{"start_s":8390.435,"end_s":8395.478,"action":"Opened Edit Assembly for basic wall type W6, reviewed its single Brick, Common structural layer with 0.800-inch thickness, then returned to Type Properties.","intent":"Review the construction assembly of wall type W6.","app":"Autodesk Revit","details":"The Edit Assembly dialog showed W6 with total thickness 0.800 and Brick, Common as the structural material."},{"start_s":8395.478,"end_s":8400.417,"action":"Opened the wall type selector again and browsed the available basic wall types while keeping W6 selected.","intent":"Browse alternative wall types for the active wall placement tool.","app":"Autodesk Revit","details":"The visible selector listed W6, W7, W8, W9, WALL 1, and additional extended wall types."},{"start_s":8400.417,"end_s":8405.426,"action":"Opened Edit Assembly for wall type W5, reviewed its 0.750-inch Brick, Common layer, returned to Type Properties, and closed the dialog.","intent":"Inspect wall type W5 and return to the floor plan.","app":"Autodesk Revit","details":"Type Properties showed W5 with width 0.750 and exterior function; no confirmed parameter change was made."},{"start_s":8405.426,"end_s":8413.05,"action":"Selected wall type W4 from the type controls, opened Type Properties and Edit Assembly, reviewed the assembly, then returned to Type Properties.","intent":"Inspect the construction settings for wall type W4.","app":"Autodesk Revit","details":"Type Properties showed W4 with width 1.000; Edit Assembly was opened and closed, with no clearly visible edit."},{"start_s":8413.05,"end_s":8420.799,"action":"Switched to Revit, opened Type Properties for a Basic Wall, entered Edit Assembly, and then returned toward the Type Properties dialog.","intent":"Inspect the wall type and assembly settings.","app":"Autodesk Revit","details":"Type Properties showed a Basic Wall with brick material and wall parameters."},{"start_s":8420.799,"end_s":8428.184,"action":"Opened Type Properties for wall type W2, entered Edit Assembly, and closed the dialogs to return to the floor plan.","intent":"Inspect the W2 wall type and assembly settings.","app":"Autodesk Revit","details":"W2 Type Properties showed a 0.570 wall width and brick material."},{"start_s":8428.184,"end_s":8437.977,"action":"Navigated the floor plan while placing or adjusting a wall, using clicks and view movement to position the wall endpoint.","intent":"Continue positioning a wall in the floor plan.","app":"Autodesk Revit","details":"The status bar indicated wall placement and endpoint orientation controls."},{"start_s":8437.977,"end_s":8447.849,"action":"Exited the active wall placement operation, selected a wall, and navigated the floor plan until the broader furnished layout was visible.","intent":"Review the wall and surrounding floor-plan layout.","app":"Autodesk Revit","details":"A wall was selected initially, then the view showed the GL floor plan with rooms and furniture."},{"start_s":8447.849,"end_s":8462.632,"action":"Panned the floor plan to reposition the view over the furnished apartment layout, then pressed Escape and resized the Revit window.","intent":"Adjust the working view and exit the current selection or command.","app":"Autodesk Revit","details":"The view remained on the GL floor plan."},{"start_s":8462.632,"end_s":8466.704,"action":"Scrolled repeatedly to zoom out and reveal a broader portion of the floor-plan sheet, including multiple apartment layouts and the schedule table.","intent":"Review the overall floor-plan sheet.","app":"Autodesk Revit","details":"The final view showed a zoomed-out sheet with several layouts and a bottom schedule."},{"start_s":8466.704,"end_s":8486.704,"action":"Remained idle while viewing the Revit GL floor plan.","intent":"Review the current floor plan.","app":"Autodesk Revit","details":null},{"start_s":8486.704,"end_s":8499.489,"action":"Scrolled within the GL floor plan, changing from a broad view to a closer view of the central and right-side rooms.","intent":"Inspect floor-plan details.","app":"Autodesk Revit","details":"System status changes occurred during the scrolling."},{"start_s":8499.489,"end_s":8516.063,"action":"Navigated and zoomed within the floor plan, entered the Scale tool, then switched to Place Wall mode and positioned the view near a wall or window detail.","intent":"Prepare to modify the wall layout.","app":"Autodesk Revit","details":"The view ended in Place Wall mode for Basic Wall W2."},{"start_s":8516.063,"end_s":8520.534,"action":"Opened the Basic Wall W2 Edit Assembly dialog from Type Properties, reviewed the layered wall construction, and closed the dialog.","intent":"Inspect the W2 wall assembly.","app":"Autodesk Revit","details":"The assembly showed a 0.570-inch Brick, Common structural layer."},{"start_s":8520.534,"end_s":8526.764,"action":"Opened Type Properties for Basic Wall W3, entered its Edit Assembly dialog, and reviewed the wall layers.","intent":"Inspect the W3 wall assembly.","app":"Autodesk Revit","details":"The assembly showed a 0.375-inch Brick, Common structural layer."},{"start_s":8526.764,"end_s":8534.028,"action":"Returned to the floor plan, selected Basic Wall W3, opened Type Properties, and entered the Edit Assembly dialog for wall type W4.","intent":"Inspect another wall type while preparing wall placement.","app":"Autodesk Revit","details":"The W4 Type Properties dialog showed a width of 1.000 inch."},{"start_s":8534.028,"end_s":8542.334,"action":"Opened Revit wall type properties for Basic Wall W5, opened Edit Assembly, reviewed the assembly, and closed the dialogs to return to the floor plan.","intent":"Review the wall type and assembly definition.","app":"Autodesk Revit","details":"Type Properties showed type W5."},{"start_s":8542.334,"end_s":8550.101,"action":"Opened Type Properties for Basic Wall W6, opened Edit Assembly, reviewed the assembly, and closed the dialogs to return to the floor plan.","intent":"Review the wall type and assembly definition.","app":"Autodesk Revit","details":"Type Properties showed type W6."},{"start_s":8550.101,"end_s":8557.427,"action":"Selected Basic Wall W7 from the wall type list, opened its Type Properties and Edit Assembly dialogs, reviewed them, and closed the dialogs.","intent":"Review the W7 wall type and assembly definition.","app":"Autodesk Revit","details":"The wall type selector displayed W7 and other available wall types."},{"start_s":8557.427,"end_s":8564.014,"action":"Opened Type Properties for Basic Wall W8, opened Edit Assembly, reviewed the assembly, and closed the dialogs to return to the floor plan.","intent":"Review the wall type and assembly definition.","app":"Autodesk Revit","details":"Type Properties showed type W8."},{"start_s":8564.014,"end_s":8571.793,"action":"Opened Type Properties for Basic Wall W9, opened Edit Assembly, reviewed the assembly, and closed the dialogs.","intent":"Review the W9 wall type and assembly definition.","app":"Autodesk Revit","details":"Type Properties showed type W9."},{"start_s":8571.793,"end_s":8578.953,"action":"Selected the WALL 1 wall type, opened Type Properties and Edit Assembly, reviewed the assembly, and closed the dialogs to return to the floor plan.","intent":"Review the WALL 1 type and assembly definition.","app":"Autodesk Revit","details":"Type Properties showed type WALL 1."},{"start_s":8578.953,"end_s":8598.405,"action":"Scrolled and clicked repeatedly in the zoomed Floor Plan: GL view while the Place Wall tool remained active, repositioning the view around the wall and raster underlay.","intent":"Position the floor-plan view and prepare a wall placement.","app":"Autodesk Revit","details":"Basic Wall WALL 1 was active; no completed wall placement was visible."},{"start_s":8598.405,"end_s":8612.975,"action":"Dismissed the Revit warning, briefly hid and restored the application window, then resized it and returned to the floor plan with the raster image selected before re-entering Place Wall.","intent":"Recover the Revit workspace and continue wall editing.","app":"Autodesk Revit","details":"The view changed from a broader raster-underlay plan to a close-up around the lobby and bedroom area."},{"start_s":8612.975,"end_s":8617.539,"action":"Scrolled slightly, clicked wall type controls in the Properties panel, and changed the active Basic Wall type from W3 to W4 while keeping Place Wall active.","intent":"Select the wall type for the next placement.","app":"Autodesk Revit","details":"The wall placement status still prompted for a wall start point."},{"start_s":8617.539,"end_s":8635.088,"action":"Opened Type Properties for Basic Wall W4, entered the Edit Assembly dialog, reviewed the wall assembly, and then dismissed the dialogs with Escape to return to the floor plan.","intent":"Inspect the selected wall type assembly before continuing.","app":"Autodesk Revit","details":"The Type Properties dialog showed W4 with a 1.000 width and Brick, Common structural material."},{"start_s":8635.088,"end_s":8653.467,"action":"Switched through Windows Explorer to the recorder window and back, then reviewed the raster-backed floor plan and clicked near the lower edge of the view.","intent":"Inspect or reference the floor-plan image while editing.","app":"Autodesk Revit","details":"The recorder window was active briefly; the Revit plan remained visible before returning to the application."},{"start_s":8653.467,"end_s":8667.612,"action":"Dragged extensively across the floor plan to pan the view, then scrolled to zoom toward the lobby, drawing room, bedrooms, and kitchen area.","intent":"Navigate and closely inspect a different region of the floor plan.","app":"Autodesk Revit","details":"The final view was centered on the lobby and adjacent furnished rooms; no wall placement completion was visible."},{"start_s":8667.612,"end_s":8677.735,"action":"Navigated the GL floor plan by panning and zooming around the bedrooms, lobby, drawing room, and utility area, then clicked the plan and typed “CS.”","intent":"Inspect the floor plan and initiate a command or search.","app":"Autodesk Revit","details":"The view remained on the GL floor plan with raster imagery visible."},{"start_s":8677.735,"end_s":8696.127,"action":"Zoomed and panned across the GL floor plan, selected a horizontal wall near the master bedroom, and left the wall highlighted in Modify | Walls mode.","intent":"Inspect and select a wall element for editing.","app":"Autodesk Revit","details":"The selected element was a Basic Wall, WALL 1, shown with turquoise highlighting."},{"start_s":8696.127,"end_s":8703.807,"action":"Opened the wall type selector, browsed the available Basic Wall types, and selected W2 for the highlighted wall.","intent":"Change the selected wall to a different wall type.","app":"Autodesk Revit","details":"The type list displayed wall options including W2 through W9; the Properties panel ended on Basic Wall W2."},{"start_s":8703.807,"end_s":8714.05,"action":"Zoomed and panned around the selected wall beside the master bedroom and master toilet, then clicked and reviewed the wall area without a visible geometry change.","intent":"Inspect the wall placement and surrounding room boundaries.","app":"Autodesk Revit","details":"The selected wall remained highlighted while the view moved from a close-up to the master bedroom and toilet."},{"start_s":8714.05,"end_s":8724.193,"action":"Selected another wall segment near the master toilet and shaft, zoomed and panned downward, and reviewed the highlighted segment in the plan.","intent":"Inspect adjacent wall segments around the toilet and shaft.","app":"Autodesk Revit","details":"The Properties panel identified the selected element as Basic Wall W9."},{"start_s":8724.193,"end_s":8734.535,"action":"Panned and zoomed toward the master toilet and dining-side area, then activated wall placement and moved the cursor to prepare a new wall start point.","intent":"Begin placing a new wall in the floor plan.","app":"Autodesk Revit","details":"The final view showed Modify | Place Wall with Basic Wall WALL 1 and the prompt to click to enter the wall start point."},{"start_s":8734.535,"end_s":8744.443,"action":"Activated Revit's Place Wall tool, selected different Basic Wall types, and zoomed or panned around the master toilet area while positioning a wall. Pressed Escape as the view and selection state changed.","intent":"Position or adjust a wall near the master toilet.","app":"Autodesk Revit","details":"Floor Plan: GL; wall placement mode was active."},{"start_s":8744.443,"end_s":8754.863,"action":"Selected a wall and navigated around its upper edge with zoom and pan gestures. Left the wall highlighted in Modify Walls mode, with temporary dimensions changing from about 6.775 feet to 6.817 feet.","intent":"Inspect or adjust the selected wall geometry.","app":"Autodesk Revit","details":"Selected Basic Wall W3 in the master toilet area."},{"start_s":8754.863,"end_s":8764.679,"action":"Exited the prior wall state, selected another Basic Wall type, and navigated to the right side of the master toilet. Selected the vertical wall bordering the balcony-side area, leaving it highlighted with dimensions visible.","intent":"Select and inspect the adjacent toilet wall.","app":"Autodesk Revit","details":"Selected Basic Wall W9; the master toilet and balcony-side boundary were visible."},{"start_s":8764.679,"end_s":8774.677,"action":"Kept the vertical wall selected while zooming and panning around its lower endpoint and nearby balcony edge. Used Escape and undo-style keystrokes while reviewing the wall position.","intent":"Review or refine the selected wall placement.","app":"Autodesk Revit","details":"Basic Wall W9 remained selected in Modify Walls mode."},{"start_s":8774.677,"end_s":8784.224,"action":"Exited selection to review a wider portion of the floor plan, then re-entered Place Wall mode and navigated back toward the master toilet and balcony boundary. Positioned the wall tool near the right side of the toilet without a clearly confirmed placement.","intent":"Prepare to place or continue a wall along the toilet boundary.","app":"Autodesk Revit","details":"The wider view showed the master toilet, shaft, and 5'6\" wide balcony."},{"start_s":8784.224,"end_s":8795.309,"action":"Selected the right-side toilet wall and zoomed or panned outward and upward, leaving the wall highlighted with a vertical temporary dimension of about 7.208 feet.","intent":"Inspect the selected wall's length and alignment.","app":"Autodesk Revit","details":"Basic Wall W9 was selected beside the master toilet."},{"start_s":8795.309,"end_s":8801.097,"action":"Opened Autodesk Revit, navigated the GL floor plan with scrolling, and selected a wall while the Basic Wall type list was visible.","intent":"Inspect or adjust a wall element and its type.","app":"Autodesk Revit","details":"Selected wall type W9; the view remained zoomed into the floor plan."},{"start_s":8801.097,"end_s":8809.213,"action":"Scrolled and panned around the GL floor plan, changed the active wall type selection to W3, and left the top wall selected.","intent":"Review the wall and choose a different wall type.","app":"Autodesk Revit","details":"The Basic Wall dropdown showed W3 selected and the Properties panel displayed the selected wall."},{"start_s":8809.213,"end_s":8821.213,"action":"Navigated to the balcony and toilet area, activated Place Wall, and selected wall type W4 while positioning the wall cursor near the plan.","intent":"Prepare to place a wall in the floor plan.","app":"Autodesk Revit","details":"Revit was in Modify | Place Wall mode with a wall placement preview visible."},{"start_s":8821.213,"end_s":8830.367,"action":"Scrolled and panned around the toilet and balcony area, changed the active wall type from W4 to W5, and continued positioning the wall tool.","intent":"Configure and position a wall for placement.","app":"Autodesk Revit","details":"The Basic Wall type list was open and W5 was selected; no completed wall placement was clearly shown."},{"start_s":8830.367,"end_s":8834.888,"action":"Selected successive wall types from the Basic Wall list, ending with W8, while keeping the wall placement area highlighted beside the balcony.","intent":"Compare or choose a wall type for the selected wall or placement.","app":"Autodesk Revit","details":"The selected wall remained highlighted in cyan and the Properties panel showed Basic Wall W8."},{"start_s":8834.888,"end_s":8839.937,"action":"Opened the wall type list, changed the active selection from W8 to W2, and continued working on the highlighted wall beside the balcony.","intent":"Choose a different wall type for the wall element.","app":"Autodesk Revit","details":"The Basic Wall dropdown was open with W2 selected; the wall geometry remained highlighted."},{"start_s":8839.937,"end_s":8849.539,"action":"Selected and adjusted wall geometry in the Revit floor plan, panning or zooming around the toilet and balcony area and cancelling transient commands as needed.","intent":"Refine wall placement or geometry near the balcony and toilet.","app":"Autodesk Revit","details":"Floor Plan: GL; wall W8 was selected."},{"start_s":8849.539,"end_s":8860.967,"action":"Continued navigating the floor plan and manipulating the selected wall region, then exited the prior command and activated Place Wall with wall type W5.","intent":"Prepare to draw another wall segment in the floor plan.","app":"Autodesk Revit","details":"The view ended zoomed out over the bedroom, toilet, kitchen, and balcony."},{"start_s":8860.967,"end_s":8865.152,"action":"Kept Place Wall active, changed the wall type to W2, and panned or zoomed toward the balcony edge without completing a visible wall segment.","intent":"Set the desired wall type and position for wall placement.","app":"Autodesk Revit","details":"Status bar indicated that Revit was waiting for the wall start point."},{"start_s":8865.152,"end_s":8869.608,"action":"Selected a wall location near the balcony window, displayed a temporary 2.417-foot horizontal measurement, cancelled the active operation, and opened the wall-type list.","intent":"Inspect or choose a wall type while positioning a wall near the balcony.","app":"Autodesk Revit","details":"Wall type list showed W5, W6, W7, W8, W9, and other basic wall types."},{"start_s":8869.608,"end_s":8879.642,"action":"Selected or started a wall segment and dragged across the balcony area, producing a temporary 11.167-foot horizontal measurement while the wall placement command remained active.","intent":"Place or size a wall segment along the balcony edge.","app":"Autodesk Revit","details":"Wall W8 was active and the view panned toward the right side of the balcony."},{"start_s":8879.642,"end_s":8889.668,"action":"Navigated farther right, selected the wall geometry, and adjusted its endpoint or extension near the marble-floored room; temporary horizontal measurements of about 2.250 feet appeared while the wall remained selected.","intent":"Align and refine the wall connection at the balcony’s right side.","app":"Autodesk Revit","details":"The final view showed wall W8 selected beside the balcony and adjacent room."},{"start_s":8889.668,"end_s":8898.451,"action":"Adjusted the Revit view with multiple clicks, escape presses, window resizing, and scrolling while the wall-placement context remained active; repositioned the floor-plan view.","intent":"Navigate and adjust the Revit floor-plan view during wall placement.","app":"Autodesk Revit","details":"The view moved from a close-up wall/window area to another portion of the plan."},{"start_s":8898.451,"end_s":8906.289,"action":"Scrolled and clicked the floor plan, selecting the raster image and zooming out to reveal the kitchen, dining, utility, and toilet areas.","intent":"Inspect and reposition the floor-plan raster image.","app":"Autodesk Revit","details":"The raster image became selected, with its properties shown in the left panel."},{"start_s":8906.289,"end_s":8916.415,"action":"Scrolled repeatedly to zoom out and reposition the selected raster image, expanding the visible plan to include bedrooms, dining, kitchen, toilets, and the balcony.","intent":"Review a larger portion of the floor plan.","app":"Autodesk Revit","details":"The view changed from the kitchen area to a broad apartment-plan overview."},{"start_s":8916.415,"end_s":8924.459,"action":"Continued extensive scrolling over the selected raster image, zooming and panning into a close-up around the lobby marker labeled 6 and adjacent drawing-room area.","intent":"Inspect a specific portion of the floor plan in detail.","app":"Autodesk Revit","details":"The view ended on a highly magnified area around marker 6."},{"start_s":8924.459,"end_s":8933.343,"action":"Scrolled through the close-up raster image, keeping the lobby marker 6 and nearby plan lines in view while slightly repositioning the canvas.","intent":"Continue examining the detailed floor-plan area.","app":"Autodesk Revit","details":"No edits to the raster image were visible."},{"start_s":8933.343,"end_s":8945.61,"action":"Performed sustained scrolling on the selected raster image, repositioning the close-up from the marker 6 area to show more of the lobby and drawing room; system display and network status changes occurred during the navigation.","intent":"Pan and inspect adjacent areas of the floor plan.","app":"Autodesk Revit","details":"The final view showed the LOBBY and DRAWING room labels with the marker 6 still visible."},{"start_s":8945.61,"end_s":8965.61,"action":"Remained inactive while viewing the Revit GL floor plan with a raster image selected.","intent":"Review the floor plan.","app":"Autodesk Revit","details":null},{"start_s":8965.61,"end_s":8972.672,"action":"Scrolled and navigated the raster floor plan, then activated Place Wall and resized or repositioned the Revit window.","intent":"Prepare to place a wall in the floor plan.","app":"Autodesk Revit","details":"The view ended zoomed into a bedroom area with Basic Wall W8 active."},{"start_s":8972.672,"end_s":8982.611,"action":"Opened the wall type list, selected Basic Wall W2, and navigated the zoomed floor plan while remaining in Place Wall mode.","intent":"Choose a wall type and position the view for wall placement.","app":"Autodesk Revit","details":"The wall type dropdown showed Basic Wall options including W2 through W9."},{"start_s":8982.611,"end_s":8992.512,"action":"Navigated and zoomed the floor plan, then selected a wall segment near the bedroom and dining area; ended with the wall selected in Modify | Walls mode.","intent":"Inspect and modify a wall in the floor plan.","app":"Autodesk Revit","details":"The selected Basic Wall W2 displayed a length of about 12.868 feet."},{"start_s":8992.512,"end_s":9002.298,"action":"Exited the wall selection, navigated to the bedroom and toilet area, and re-entered Place Wall mode to position a new wall start point.","intent":"Continue placing or adjusting walls around the bedroom and toilet area.","app":"Autodesk Revit","details":"The view showed BED ROOM-1, TOILET-1, and POOJA labels before zooming in."},{"start_s":9002.298,"end_s":9012.422,"action":"Zoomed and panned around the bedroom-toilet boundary, clicked to place or select a wall, and ended with a vertical Basic Wall W2 highlighted in Modify | Walls mode.","intent":"Place or adjust the wall along the room boundary.","app":"Autodesk Revit","details":"The selected wall was highlighted cyan beside the doorway and POOJA area."},{"start_s":9012.422,"end_s":9022.284,"action":"Scrolled and clicked around the central wall junction in the GL floor plan, then selected a wall segment.","intent":"Inspect or select wall geometry near the room junction.","app":"Autodesk Revit","details":"The view remained tightly zoomed on the wall junction and adjacent raster floor-plan image."},{"start_s":9022.284,"end_s":9033.401,"action":"Clicked repeatedly around the selected wall and pressed Escape several times while keeping the wall segment highlighted.","intent":"Adjust or verify the wall selection and exit transient commands.","app":"Autodesk Revit","details":"The selected Basic Wall W2 remained outlined in cyan."},{"start_s":9033.401,"end_s":9043.517,"action":"Selected the wall, dragged across the view to reposition or pan the floor plan, and scrolled to a wider view of the bedroom and toilet area.","intent":"Inspect the selected wall in relation to nearby rooms and fixtures.","app":"Autodesk Revit","details":"The view expanded to show BED ROOM-1, TOILET-1, and the ODU shaft area while the wall remained selected."},{"start_s":9043.517,"end_s":9052.921,"action":"Middle-clicked to pan and repositioned the view around the selected wall, bringing the ODU shaft and adjacent bedroom/toilet layout into clearer view.","intent":"Review the wall location within the floor-plan context.","app":"Autodesk Revit","details":"The selected wall stayed active with its properties visible."},{"start_s":9052.921,"end_s":9062.792,"action":"Panned and zoomed toward the ODU shaft, typed a shortcut, and activated wall placement mode near the shaft.","intent":"Begin placing or extending a wall near the ODU shaft.","app":"Autodesk Revit","details":"The ribbon changed to Modify | Place Wall and showed Basic Wall W2 with placement controls."},{"start_s":9062.792,"end_s":9072.372,"action":"Placed or adjusted the wall endpoint along the right side of the ODU shaft, then dragged the endpoint to refine its position.","intent":"Position the new wall segment at the shaft boundary.","app":"Autodesk Revit","details":"A cyan wall segment appeared beside the shaft, followed by a dimension and temporary arc while the endpoint was being dragged."},{"start_s":9072.372,"end_s":9082.445,"action":"Dragged the selected wall geometry, repositioning the highlighted wall segment around the shaft opening and changing its displayed dimensions.","intent":"Adjust the wall segment to fit the shaft opening.","app":"Autodesk Revit","details":"Selected Basic Wall W2 remained active in Floor Plan GL."},{"start_s":9082.445,"end_s":9092.301,"action":"Clicked and zoomed or panned around the selected wall, inspecting the shaft opening and its surrounding edges at close range.","intent":"Review the wall placement and surrounding geometry.","app":"Autodesk Revit","details":"The view moved from the shaft sign to a close-up of the right wall edge."},{"start_s":9092.301,"end_s":9102.287,"action":"Scrolled and navigated across the floor plan, then typed “SL” and clicked near the shaft area; the view zoomed back to show the surrounding rooms and opening.","intent":"Navigate to and inspect the shaft-related floor-plan geometry.","app":"Autodesk Revit","details":"The selected wall remained visible near the ODU Shaft opening."},{"start_s":9102.287,"end_s":9112.219,"action":"Clicked and navigated around the shaft opening with repeated zooming and panning, then selected nearby wall geometry for inspection.","intent":"Inspect and refine wall segments around the opening.","app":"Autodesk Revit","details":"The view ended with the shaft opening centered and a wall segment selected."},{"start_s":9112.219,"end_s":9122.31,"action":"Selected multiple wall segments around the shaft and entered “-6'” in a temporary dimension field, applying a positional adjustment; the view then zoomed out to show the combined selection.","intent":"Modify the selected wall layout using a measured offset.","app":"Autodesk Revit","details":"Three walls were selected by the end of the span."},{"start_s":9122.31,"end_s":9132.418,"action":"Selected the shaft-related wall geometry, entered “-8'” in the temporary dimension field, and then zoomed and panned out across the floor plan.","intent":"Apply another measured wall adjustment and review its placement in the broader plan.","app":"Autodesk Revit","details":"The final view showed the shaft at the upper-left of the plan with adjacent rooms visible."},{"start_s":9132.418,"end_s":9142.4,"action":"Clicked and navigated within the Revit GL floor plan, typed “CS,” and pressed Escape while the wall placement/editing context remained active.","intent":"Adjust or inspect wall placement in the floor plan.","app":"Autodesk Revit","details":"The view moved from Bedroom-2 toward Toilet-2 and the adjacent shaft."},{"start_s":9142.4,"end_s":9162.4,"action":"Clicked and middle-clicked around the plan, leaving a vertical wall selected in cyan near the washer area.","intent":"Inspect or position the selected wall segment.","app":"Autodesk Revit","details":"The selected wall’s properties showed Basic Wall W8."},{"start_s":9162.4,"end_s":9182.4,"action":"Paused with the vertical wall selected in the zoomed-in GL floor plan.","intent":"Review the current wall selection.","app":"Autodesk Revit","details":null},{"start_s":9182.4,"end_s":9202.4,"action":"Remained on the same zoomed-in wall selection and performed a scroll gesture without a visible change.","intent":"Continue reviewing the wall location.","app":"Autodesk Revit","details":null},{"start_s":9202.4,"end_s":9213.278,"action":"Scrolled and navigated around the plan, briefly switched to Windows Explorer and the recorder, then returned to Revit and activated wall placement near the shaft and washer/dishwasher area.","intent":"Resume wall editing at the adjacent service-area boundary.","app":"Autodesk Revit","details":"The view returned with a horizontal wall highlighted in cyan and the wall tool awaiting a start point."},{"start_s":9213.278,"end_s":9222.89,"action":"Scrolled and repositioned the GL floor-plan view, then selected a horizontal wall and typed “CS” while editing remained active.","intent":"Inspect or adjust the horizontal wall near the shaft.","app":"Autodesk Revit","details":"The selected wall was identified as Basic Wall W2; the view ended zoomed out around Toilet-2, the shaft, washer, and dishwasher."},{"start_s":9222.89,"end_s":9232.644,"action":"Adjusted the Revit view around the shower area with clicks and scrolling, selected the upper wall segment, and exited the active wall-placement command.","intent":"Inspect and select a wall segment near the shower.","app":"Autodesk Revit","details":"Floor Plan: GL; selected Basic Wall W2."},{"start_s":9232.644,"end_s":9242.749,"action":"Zoomed and panned around the toilet and shower area, then selected the right-side wall and entered wall modification mode.","intent":"Inspect and modify the wall boundary beside the shower.","app":"Autodesk Revit","details":"Selected wall highlighted in cyan; Modify | Walls tools became active."},{"start_s":9242.749,"end_s":9251.708,"action":"Exited the prior command, navigated around the shower and utility area, and selected the long right-side wall for editing.","intent":"Review and select the adjacent wall segment.","app":"Autodesk Revit","details":"Wall W2 was selected and highlighted in cyan."},{"start_s":9251.708,"end_s":9261.105,"action":"Kept the wall selected while zooming and panning, then repositioned the view to inspect the upper shower enclosure and its dimension.","intent":"Inspect the selected wall and surrounding geometry.","app":"Autodesk Revit","details":"The selected wall remained highlighted; a temporary dimension of about 2.388 feet was visible."},{"start_s":9261.105,"end_s":9271.133,"action":"Edited a visible dimension field by entering -6' and confirming, then zoomed out and selected a room-separation element near the utility corridor.","intent":"Adjust the wall or related boundary location and review the result.","app":"Autodesk Revit","details":"The view widened to show Toilet-2, the shower, washer, and dish washer; Room Separation was selected near the corridor."},{"start_s":9271.133,"end_s":9282.819,"action":"Dragged and repositioned the selected boundary/wall element along the utility corridor, navigated the plan, and then exited into Delete Inner Segment mode near the shower corner.","intent":"Refine the boundary geometry and prepare to remove an inner segment.","app":"Autodesk Revit","details":"The long wall/boundary was highlighted during repositioning; final status showed Select element to split."},{"start_s":9282.819,"end_s":9293.497,"action":"Selected and manipulated a wall segment in the GL floor plan, using clicks, scrolling, and dragging near the utility area.","intent":"Adjust the wall geometry or position in the floor plan.","app":"Autodesk Revit","details":"A wall remained selected and a grip was visible near the utility area."},{"start_s":9293.497,"end_s":9305.0,"action":"Selected the wall and entered edit-related commands, then scrolled and clicked around the adjacent raster plan; the view ended with the wall no longer selected and Delete Inner Segment mode visible.","intent":"Modify or inspect wall geometry against the underlying plan.","app":"Autodesk Revit","details":"The GL floor plan showed the utility area and raster image underlay."},{"start_s":9305.0,"end_s":9317.582,"action":"Dragged and clicked along the plan, navigated around the utility and kitchen edge, and left a wall segment selected with temporary dimensions visible.","intent":"Reposition or refine a wall segment in the floor plan.","app":"Autodesk Revit","details":"The selected wall was highlighted cyan along the right side of the utility area."},{"start_s":9317.582,"end_s":9328.274,"action":"Navigated and zoomed the GL floor plan, clicked the raster underlay, and entered a distance of -6 feet followed by Enter.","intent":"Adjust the selected plan element using a precise dimensional offset.","app":"Autodesk Revit","details":"The view zoomed out to show the kitchen, toilets, shaft, and utility area before the numeric entry."},{"start_s":9328.274,"end_s":9337.044,"action":"Zoomed and panned across the floor plan from the full apartment layout into the bedroom and toilet area, then clicked near the upper plan region.","intent":"Inspect or navigate to another area of the floor plan.","app":"Autodesk Revit","details":"The final view was zoomed into Toilet-1 and the adjacent bedroom."},{"start_s":9337.044,"end_s":9351.82,"action":"Selected and dragged a wall around the bedroom, toilet, and Pooja area, then panned and zoomed while entering partial text in the active control.","intent":"Modify or align a wall segment in the bedroom and toilet area.","app":"Autodesk Revit","details":"The selected wall type changed to Basic Wall W2, and the final view centered on Toilet-1, Pooja, and Bed Room-2."},{"start_s":9351.82,"end_s":9358.176,"action":"Switched to Autodesk Revit, dismissed active commands, and entered wall placement mode in the GL floor plan. Resized and repositioned the Revit window while leaving the plan centered on the toilet and pooja area.","intent":"Prepare to place or modify a wall in the floor plan.","app":"Autodesk Revit","details":"Basic Wall type W2 was active by the end of the span."},{"start_s":9358.176,"end_s":9366.713,"action":"Scrolled and clicked within the floor plan while wall placement remained active, changing the view to a closer section around the toilet and adjacent wall. Pressed Escape and adjusted the window near the end of the span.","intent":"Navigate and position the plan for wall placement.","app":"Autodesk Revit","details":"The view remained in Modify | Place Wall mode with Basic Wall W3 visible during the interaction."},{"start_s":9366.713,"end_s":9374.333,"action":"Scrolled to zoom out and reveal the surrounding bedrooms, toilet, pooja, and dining areas, leaving a wall selected in the plan.","intent":"Review the wall location in the broader floor-plan context.","app":"Autodesk Revit","details":"A wall segment near the toilet and pooja area was highlighted."},{"start_s":9374.333,"end_s":9394.333,"action":"Remained idle while viewing the GL floor plan with the wall selected.","intent":"Review the current wall placement and surrounding layout.","app":"Autodesk Revit","details":null},{"start_s":9394.333,"end_s":9403.495,"action":"Middle-clicked and panned the floor plan toward the right, shifting the view to show more of Bedroom 2, Toilet-2, and the adjacent shaft while retaining the wall selection.","intent":"Reposition the plan to inspect the selected wall and nearby rooms.","app":"Autodesk Revit","details":"The selected wall remained highlighted during the pan."},{"start_s":9403.495,"end_s":9414.409,"action":"Pressed Escape, clicked near the selected wall, and entered wall placement mode again. Scrolled and panned toward Bedroom 2 and Toilet-2, ending with the view positioned for a new wall start point.","intent":"Resume wall placement and navigate to the next wall location.","app":"Autodesk Revit","details":"Basic Wall W2 was active and the status prompt indicated that a wall start point could be selected."},{"start_s":9414.409,"end_s":9427.902,"action":"Navigated around the Floor Plan: GL view with scrolling and clicks, canceled an active operation, and switched windows before returning to Autodesk Revit. Activated wall placement, leaving the plan centered on Toilet-2 and the adjacent shaft.","intent":"Continue editing the floor plan near the Toilet-2 area.","app":"Autodesk Revit","details":"A wall segment was selected, then the Place Wall tool became active."},{"start_s":9427.902,"end_s":9447.331,"action":"Zoomed and panned around Toilet-2, selected wall-related geometry, canceled an operation, and reactivated wall placement. Left the view zoomed in on the toilet and adjacent kitchen fixtures.","intent":"Inspect and prepare wall geometry around Toilet-2.","app":"Autodesk Revit","details":"The selected wall type changed from W2 to W3; no clearly completed new wall is visible."},{"start_s":9447.331,"end_s":9456.919,"action":"Scrolled and panned across the floor plan, selected wall geometry near the right side, and canceled active commands. Began positioning another wall or reference near the kitchen and Toilet-2 boundary.","intent":"Adjust or inspect wall placement around the kitchen and bathroom boundary.","app":"Autodesk Revit","details":"Wall W2/W8 geometry was highlighted during the interaction."},{"start_s":9456.919,"end_s":9466.383,"action":"Navigated and zoomed the plan, entered the Place Dimensions tool, and selected references around Toilet-2. Left a dimension placement operation active while viewing the bathroom and shaft.","intent":"Create or inspect dimensional references for the bathroom layout.","app":"Autodesk Revit","details":"The ribbon showed Modify | Place Dimensions with Linear dimension style."},{"start_s":9466.383,"end_s":9476.618,"action":"Panned and zoomed around Toilet-2 while placing dimensions, used Tab to cycle references, and then exited the dimension command. Returned to wall modification with a wall selected and the view zoomed out to include the kitchen and bathroom.","intent":"Dimension and then resume wall editing around Toilet-2.","app":"Autodesk Revit","details":"The final view showed wall W3 selected near the left side of Toilet-2."},{"start_s":9476.618,"end_s":9486.685,"action":"Scrolled and panned around the Floor Plan: GL view, canceled the active selection or command, and continued reviewing the Toilet-2 and shaft area at a wider zoom. Ended with no active element selected and the floor plan visible.","intent":"Review the adjusted floor-plan area and finish the editing sequence.","app":"Autodesk Revit","details":"The Properties panel showed Floor Plan: GL and the raster underlay remained visible."},{"start_s":9486.685,"end_s":9497.264,"action":"Clicked around the floor plan, selected a wall near the utility area, and briefly hid or repositioned the Revit window before returning to the plan.","intent":"Inspect or adjust a wall in the floor plan.","app":"Autodesk Revit","details":"The GL floor plan shows the utility area, kitchen, and adjacent shaft; a wall is selected in the later view."},{"start_s":9497.264,"end_s":9506.032,"action":"Activated wall placement, zoomed and panned around the utility and kitchen area, and clicked within the plan while the wall tool remained active; then canceled transient actions.","intent":"Position or begin placing a wall in the floor plan.","app":"Autodesk Revit","details":"The Modify | Place Wall context is visible with Basic Wall W3 and the view focused near the kitchen doorway."},{"start_s":9506.032,"end_s":9515.271,"action":"Zoomed and panned across the floor plan, moving from a close utility-area view to a wider kitchen view, and canceled the active wall modification.","intent":"Review the wall and surrounding floor-plan layout at different scales.","app":"Autodesk Revit","details":"The selected wall is visible beside the utility room in the wider plan view."},{"start_s":9515.271,"end_s":9525.963,"action":"Zoomed out repeatedly from the kitchen and utility area to reveal most of the apartment floor plan, with intermittent middle-click navigation.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The final view shows the broader first-floor layout and the block plan title area."},{"start_s":9525.963,"end_s":9535.923,"action":"Continued zooming and panning across the floor plan, then switched the active view from Floor Plan: GL to the {3D} view.","intent":"Inspect the building model in three dimensions after reviewing the plan.","app":"Autodesk Revit","details":"The title changes to Autodesk Revit 2025.4 - [PROJECT 11 - 3D View: {3D}], showing a wall-only 3D model."},{"start_s":9535.923,"end_s":9546.03,"action":"Zoomed and panned within the 3D view, moving from a close-up of interior walls to a broader isometric view of the building layout.","intent":"Examine the modeled wall arrangement from different 3D scales.","app":"Autodesk Revit","details":"The 3D view displays many pink wall elements and a highlighted wall segment near the lower portion of the model."},{"start_s":9546.03,"end_s":9557.496,"action":"Adjusted the Revit 3D view through repeated middle-button scrolling and clicks, zooming out to reveal more of the pink wall layout.","intent":"Review the overall modeled building layout in 3D.","app":"Autodesk Revit","details":"Project 11 3D view remained open."},{"start_s":9557.496,"end_s":9568.154,"action":"Scrolled the Revit 3D view to adjust the model framing while keeping the building layout visible.","intent":"Continue reviewing the 3D model.","app":"Autodesk Revit","details":"No visible tool or view change beyond navigation."},{"start_s":9568.154,"end_s":9575.574,"action":"Selected the GL floor-plan view, briefly hiding and restoring the Revit window, then opened Floor Plan: GL.","intent":"Switch from the 3D overview to the GL floor plan.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - Floor Plan: GL."},{"start_s":9575.574,"end_s":9588.783,"action":"Reviewed the GL floor plan and scrolled to zoom into the furnished living, kitchen, utility, and balcony area.","intent":"Inspect details of the GL floor plan.","app":"Autodesk Revit","details":"The view changed from the full plan to a closer crop."},{"start_s":9588.783,"end_s":9598.552,"action":"Repeatedly scrolled and middle-clicked across the GL floor plan, panning and zooming between the living, kitchen, bedrooms, drawing room, and lobby areas.","intent":"Navigate and inspect different regions of the floor plan.","app":"Autodesk Revit","details":"The final view focused on Bedroom-2, Lobby, and Drawing."},{"start_s":9598.552,"end_s":9608.46,"action":"Continued panning and zooming across the GL floor plan, moving from dining, kitchen, and balcony areas to the stair, lift, electrical room, and upper bedroom region.","intent":"Continue reviewing floor-plan spaces and circulation areas.","app":"Autodesk Revit","details":"The final view showed the stair, goods lift, electrical room, and adjacent bedrooms."},{"start_s":9608.46,"end_s":9618.389,"action":"Navigated around the GL floor plan with repeated middle-clicks and scroll gestures, changing the visible area from a close view of bedrooms and toilets to a wider apartment layout.","intent":"Inspect different portions of the floor plan.","app":"Autodesk Revit","details":"Raster floor-plan image remained visible while the view was panned or zoomed."},{"start_s":9618.389,"end_s":9633.438,"action":"Continued panning and zooming across the GL floor plan, moving from apartment-level views to a broader building layout. Moved and resized the Revit window near the end of the span.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The final view showed multiple apartment plans and shared circulation areas."},{"start_s":9633.438,"end_s":9641.684,"action":"Returned focus to Revit, panned and zoomed the floor-plan raster, then switched the active view from Floor Plan: GL to 3D View: {3D}.","intent":"Change from plan inspection to a 3D model view.","app":"Autodesk Revit","details":"The floor plan remained selected as a raster image before the 3D view became active."},{"start_s":9641.684,"end_s":9651.538,"action":"Manipulated the 3D view with middle-click navigation and scroll gestures, changing from an angled model view to a top-oriented wireframe-like view of the building layout.","intent":"Inspect the model from different orientations and scales.","app":"Autodesk Revit","details":"The 3D view displayed building walls and floor-plan geometry on a dark background."},{"start_s":9651.538,"end_s":9661.747,"action":"Continued navigating the 3D view with panning and zooming, alternately enlarging and reducing the building model until it appeared as a small overall model.","intent":"Review the 3D model at multiple scales.","app":"Autodesk Revit","details":"The model shifted between close wireframe views and a distant overall view."},{"start_s":9661.747,"end_s":9674.611,"action":"Switched back to Floor Plan: GL, zoomed and panned to the lobby and adjacent drawing-room area, then activated the Scale tool and selected geometry near the lobby doorway.","intent":"Prepare to scale or adjust the selected floor-plan raster.","app":"Autodesk Revit","details":"The final screen showed Modify | Scale active with the raster image selected and a scale reference near the lobby."},{"start_s":9674.611,"end_s":9694.582,"action":"Activated Revit's Place Window tool and navigated the floor plan by panning and zooming around the selected window area.","intent":"Review window placement locations on the GL floor plan.","app":"Autodesk Revit","details":"A Windows_Dbl_Plain 6' type was active while the view moved toward the toilet and shaft area."},{"start_s":9694.582,"end_s":9705.916,"action":"Changed the active window type to Windows_Sgl_Plain 2.5' and panned and zoomed around the master toilet, shaft, dining, and kitchen areas.","intent":"Review or prepare a different window type for placement.","app":"Autodesk Revit","details":"The floor plan ended zoomed out around the dining and kitchen spaces."},{"start_s":9705.916,"end_s":9713.787,"action":"Changed the active window type to Windows_Dbl_Plain 8' and panned across the dining and kitchen plan, ending near the kitchen counter and adjacent window.","intent":"Review placement of a larger double window.","app":"Autodesk Revit","details":"The selected type shown in Properties was Windows_Dbl_Plain 8'."},{"start_s":9713.787,"end_s":9726.96,"action":"Opened the window type list, changed the active type from Windows_Dbl_Plain 8' to Windows_Dbl_Plain 4', and zoomed in on the kitchen-side window and its dashed swing area.","intent":"Select a smaller double-window type and inspect its placement area.","app":"Autodesk Revit","details":"The type dropdown visibly listed several window sizes, with Windows_Dbl_Plain 4' active afterward."},{"start_s":9726.96,"end_s":9740.733,"action":"Opened the window type list, selected Windows_Sgl_Plain 2.5', and navigated by zooming and panning to the toilet and shaft-side window.","intent":"Select and inspect a single-window configuration.","app":"Autodesk Revit","details":"The plan ended focused tightly on the window beside the shaft."},{"start_s":9740.733,"end_s":9746.257,"action":"Changed the active window type to Windows_Dbl_Plain 2' and zoomed and panned to the adjacent wall opening and dashed swing area.","intent":"Review a smaller double-window type at another plan location.","app":"Autodesk Revit","details":"The final view showed the selected window beside a door-swing outline."},{"start_s":9746.257,"end_s":9757.241,"action":"Switched to Autodesk Revit and navigated the GL floor plan while the Place Window tool remained active, zooming and panning from a close-up window area to a broader bedroom and toilet view.","intent":"Position the floor plan to place or inspect a window.","app":"Autodesk Revit","details":"The selected type was Windows_Dbl_Plain 2.5'."},{"start_s":9757.241,"end_s":9769.606,"action":"Opened the window type list, changed the selected type from Windows_Dbl_Plain 2.5' to 5', and zoomed in on the bedroom window area.","intent":"Choose a different window size for placement or inspection.","app":"Autodesk Revit","details":"The type dropdown visibly listed several window sizes and ended with Windows_Dbl_Plain 5' selected."},{"start_s":9769.606,"end_s":9779.997,"action":"Changed the active window type to Windows_Sgl_Plain 2.5', then selected the 2.5' type and navigated across the bedroom and adjacent toilet area with zooming and panning.","intent":"Select and position a single plain window type.","app":"Autodesk Revit","details":"The active tool remained Modify | Place Window."},{"start_s":9779.997,"end_s":9790.126,"action":"Changed the selected window type to 6', clicked near the bedroom window area, and zoomed and panned while reviewing the resulting window and temporary dimensions.","intent":"Inspect or position the 6-foot window in the floor plan.","app":"Autodesk Revit","details":"A temporary dimension of 3.007' was visible near the window."},{"start_s":9790.126,"end_s":9796.908,"action":"Clicked near the window area and zoomed out substantially to review a larger portion of the GL floor plan containing multiple apartments and rooms.","intent":"Review the window location in the broader floor plan context.","app":"Autodesk Revit","details":"The view ended on a wide plan overview with the 3BHK 1858 Sft. label visible."},{"start_s":9796.908,"end_s":9811.755,"action":"Continued panning and zooming through the GL floor plan, moving from the apartment overview to close-ups near shafts and the staircase press shaft; pressed Escape to exit the current interaction and left the view centered on another window.","intent":"Navigate and review additional window locations in the plan.","app":"Autodesk Revit","details":"The Place Window tool remained active in the visible interface."},{"start_s":9811.755,"end_s":9830.279,"action":"Activated Revit’s window placement tool, selected window types in the Properties palette, and navigated around the GL floor plan while positioning or reviewing windows.","intent":"Place or adjust windows on the floor plan.","app":"Autodesk Revit","details":"The view moved from the stair and lift area to the bedroom and surrounding windows."},{"start_s":9830.279,"end_s":9839.766,"action":"Selected another window type in the Properties palette and zoomed or panned toward the window above the lift and adjacent bedroom area.","intent":"Continue positioning or reviewing a window.","app":"Autodesk Revit","details":"The selected type changed from 4' to 5' while the view moved closer to the wall window."},{"start_s":9839.766,"end_s":9859.766,"action":"Remained on the zoomed-in GL floor plan view, reviewing the window above the lift without recorded interaction.","intent":"Inspect the current window placement.","app":"Autodesk Revit","details":null},{"start_s":9859.766,"end_s":9876.26,"action":"Scrolled across the GL floor plan from the lift and bedroom area toward the larger bedroom and its lower wall window.","intent":"Navigate the floor plan to inspect additional windows.","app":"Autodesk Revit","details":"The view panned right and downward, revealing the M bedroom and adjacent window."},{"start_s":9876.26,"end_s":9896.26,"action":"Paused on the bedroom wall and lower window, then clicked the visible window near the end of the span.","intent":"Review or select the bedroom window.","app":"Autodesk Revit","details":"The window became visibly selected after the click."},{"start_s":9896.26,"end_s":9902.109,"action":"Scrolled and navigated to the toilet and shaft area, changed the highlighted window type to 5', and left the view centered on the toilet-room windows.","intent":"Continue placing or reviewing windows elsewhere on the floor plan.","app":"Autodesk Revit","details":"The final view shows M. TOILET, the shaft, and adjacent windows."},{"start_s":9902.109,"end_s":9913.056,"action":"Activated the window-placement tool, zoomed and panned around the master toilet and shaft area, and clicked in the plan to place or adjust a window.","intent":"Place or adjust a window in the floor plan.","app":"Autodesk Revit","details":"Master toilet and shaft area remained visible while the Windows_Sgl_Plain 2.5' type was active."},{"start_s":9913.056,"end_s":9924.477,"action":"Selected a window type from the Properties palette, navigated to the kitchen area, zoomed in, and clicked along the kitchen wall to place or adjust a window.","intent":"Place or adjust a kitchen window.","app":"Autodesk Revit","details":"The selected type changed to Windows_Dbl_Plain 4'; the view showed the kitchen and adjacent wall."},{"start_s":9924.477,"end_s":9929.683,"action":"Selected another window size in the Properties palette and navigated across the floor plan to the dining, bedroom, and balcony area.","intent":"Choose a window type and inspect another placement location.","app":"Autodesk Revit","details":"The Properties palette showed Windows_Dbl_Plain 6' while the plan remained in window-placement mode."},{"start_s":9929.683,"end_s":9937.211,"action":"Selected the 8' window type, zoomed and panned around the dining and wide balcony area, then clicked in the plan to place or adjust the window.","intent":"Place or adjust a larger window in the dining/balcony area.","app":"Autodesk Revit","details":"The view showed the dining room and 5'0\" wide balcony."},{"start_s":9937.211,"end_s":9946.524,"action":"Selected the 5' window type, reviewed the bedroom and dining portions of the plan, zoomed toward Bedroom-2, and clicked to place or adjust a window.","intent":"Place or adjust a window near Bedroom-2.","app":"Autodesk Revit","details":"Bedroom-2, dining, toilets, and balcony were visible during navigation."},{"start_s":9946.524,"end_s":9952.923,"action":"Selected the 2.5' window type, zoomed around Bedroom-2 and its exterior wall, and clicked along the wall to place or adjust the window.","intent":"Place or adjust a smaller window in Bedroom-2.","app":"Autodesk Revit","details":"The final view focused on Bedroom-2 and the exterior wall."},{"start_s":9952.923,"end_s":9963.747,"action":"Activated Revit's Place Window tool, clicked in the bedroom plan area to position a window, and navigated the view with middle-button panning and scrolling.","intent":"Place or adjust a window in the floor plan.","app":"Autodesk Revit","details":"A window instance remained selected near BED ROOM-2; the view was then navigated toward the adjacent plan area."},{"start_s":9963.747,"end_s":9978.642,"action":"Navigated around the floor plan with scrolling and panning, then clicked near the bathroom and bedroom area while the Place Window tool remained active.","intent":"Continue positioning windows in the floor plan.","app":"Autodesk Revit","details":"The view shifted from BED ROOM-2 to TOILET-2 and TOILET-1; the selected window type was shown as Windows_Dbl_Plain 2.5'."},{"start_s":9978.642,"end_s":9983.712,"action":"Opened the window type selector, reviewed available window sizes, and selected Windows_Sgl_Plain 2.5' before continuing navigation.","intent":"Change the active window type for placement.","app":"Autodesk Revit","details":"The type list displayed multiple sizes and single-pane window options; no completed placement is clearly visible."},{"start_s":9983.712,"end_s":9989.357,"action":"Selected the Windows_Sgl_Plain 2' type and clicked in the plan near the bathroom window area, then panned the view.","intent":"Place a smaller single-pane window.","app":"Autodesk Revit","details":"The active type shown in Properties was Windows_Sgl_Plain 2'."},{"start_s":9989.357,"end_s":10006.994,"action":"Opened the type list, changed the active window type back to Windows_Sgl_Plain 2.5', and clicked in the TOILET-1 area to position the window.","intent":"Select and place the desired single-pane window size.","app":"Autodesk Revit","details":"Temporary dimensions appeared around the selected or newly placed window near TOILET-1."},{"start_s":10006.994,"end_s":10026.796,"action":"Selected the Windows_Dbl_Plain 5' type and navigated with scrolling across the bedroom and bathroom portion of the floor plan.","intent":"Prepare or continue placing a larger double-pane window.","app":"Autodesk Revit","details":"The final view was centered on a long horizontal window opening beside the bedroom; placement mode remained active."},{"start_s":10026.796,"end_s":10039.976,"action":"Navigated the Revit floor plan by scrolling and repositioning the view, then switched back to the active window-placement workflow.","intent":"Continue placing or reviewing windows in the floor plan.","app":"Autodesk Revit","details":"The view remained in Modify | Place Window mode with a Windows_Dbl_Plain 5' type selected."},{"start_s":10039.976,"end_s":10044.665,"action":"Opened the window type selector, reviewed available sizes, and selected the Windows_Dbl_Plain 8' type while keeping window placement active.","intent":"Change the window type before placing it.","app":"Autodesk Revit","details":"The type list visibly included sizes such as 5', 6', 8', and metric options."},{"start_s":10044.665,"end_s":10057.707,"action":"Changed the selected type to Windows_Dbl_Plain 6', navigated across the floor plan, and positioned the view around the bedroom, M. Toilet, and shaft area.","intent":"Prepare a different window size and locate its placement area.","app":"Autodesk Revit","details":"The plan view was panned/zoomed while Modify | Place Window remained active."},{"start_s":10057.707,"end_s":10067.473,"action":"Selected the Windows_Sgl_Plain 2.5' type, zoomed into the M. Toilet and shaft, and placed or adjusted the window along the toilet wall.","intent":"Place a single window in the toilet-area wall.","app":"Autodesk Revit","details":"A narrow window was visible in the wall beside the shaft, with temporary dimensions shown after interaction."},{"start_s":10067.473,"end_s":10077.406,"action":"Switched to the Windows_Dbl_Plain 5' type, navigated to the kitchen and dining area, and positioned the view near the kitchen exterior wall.","intent":"Prepare and locate placement of a larger double window.","app":"Autodesk Revit","details":"The floor plan showed the Kitchen, Nook, Dining, and Toilet-2 areas."},{"start_s":10077.406,"end_s":10085.608,"action":"Selected the Windows_Sgl_Plain 2.5' type, navigated to Toilet-2 and the adjacent utility area, and placed or adjusted the narrow window on the wall beside the shaft/utility fixture.","intent":"Place or review a single window in the Toilet-2 area.","app":"Autodesk Revit","details":"The final view showed the narrow window between Toilet-2 and the adjacent utility area."},{"start_s":10085.608,"end_s":10096.772,"action":"Activated Revit’s Place Window tool, browsed window types in the Properties palette, and clicked in the floor plan near Bedroom-2 and Toilet-2 to place or adjust a window.","intent":"Place or modify a window in the floor plan.","app":"Autodesk Revit","details":"Window type selections changed from Windows_Sgl_Plain to Windows_Dbl_Plain; the plan view remained centered on Bedroom-2."},{"start_s":10096.772,"end_s":10106.106,"action":"Selected a 4-inch then 5-inch Windows_Dbl_Plain type, navigated the plan to the upper Bedroom-2 wall, and clicked along the wall while the Place Window tool remained active.","intent":"Choose a window type and position it on the Bedroom-2 wall.","app":"Autodesk Revit","details":"The view showed the 3BHK plan with the 2001 Sft. label and a window preview/placement along the upper wall."},{"start_s":10106.106,"end_s":10117.384,"action":"Selected larger window types, scrolled through the type list, zoomed or repositioned the plan to show the balcony and bedrooms, then pressed Escape repeatedly to cancel the active placement operation.","intent":"Review available window sizes and exit the placement command.","app":"Autodesk Revit","details":"The plan was shown at a wider view of the balcony, Living room, Bedroom-1, and Bedroom-2."},{"start_s":10117.384,"end_s":10127.039,"action":"Exited the prior placement state, selected the horizontal wall/window area near the balcony, and entered the Scale tool before returning to the Place Window command.","intent":"Inspect or adjust the selected plan element near the balcony.","app":"Autodesk Revit","details":"A temporary scale dimension appeared across the balcony-side wall, and the selected window type was Windows_Dbl_Plain 8'."},{"start_s":10127.039,"end_s":10138.091,"action":"Opened the window Type Properties, initiated renaming the 8-foot type, entered a 9-foot name, and edited the type parameter field for the rough width.","intent":"Create or modify a named 9-foot window type.","app":"Autodesk Revit","details":"The Type Properties dialog showed Family Windows_Dbl_Plain; the resulting type was 9' and Rough Width was selected at 8.000'."},{"start_s":10138.091,"end_s":10147.374,"action":"Returned to the floor plan with the 9-foot window type active, clicked the horizontal window area and nearby wall, and scrolled while continuing the Place Window command.","intent":"Continue placing or adjusting the renamed 9-foot window.","app":"Autodesk Revit","details":"The view remained zoomed on the balcony-side window and adjacent living-room furniture; placement mode was still active."},{"start_s":10147.374,"end_s":10156.05,"action":"Activated Revit's Place Window tool, navigated the GL floor plan by scrolling, and repositioned the view from the balcony area toward the bedroom and living spaces.","intent":"Review and position the floor plan for window placement.","app":"Autodesk Revit","details":"Selected window type Windows_Dbl_Plain 6'."},{"start_s":10156.05,"end_s":10164.849,"action":"Scrolled and repositioned the GL floor plan, then changed the active window type to Windows_Sgl_Plain 2.5' while viewing the bedroom, toilet, living, and dining areas.","intent":"Select a suitable window type and locate its placement area.","app":"Autodesk Revit","details":"Place Window mode remained active."},{"start_s":10164.849,"end_s":10170.369,"action":"Selected Windows_Dbl_Plain 5' and zoomed or panned toward the lobby and adjacent drawing-room wall, leaving the window placement preview in the plan.","intent":"Prepare a 5-foot double window placement near the lobby.","app":"Autodesk Revit","details":"A temporary dimension marker appeared near the lobby wall."},{"start_s":10170.369,"end_s":10185.174,"action":"Selected the window near the lobby wall and navigated across the drawing-room and lobby areas with scrolling and middle-button panning; Revit displayed a geometry-collision warning during the operation.","intent":"Inspect or adjust window placement along the lobby and drawing-room walls.","app":"Autodesk Revit","details":"Status text indicated that some elements might not be copied because of a geometry collision."},{"start_s":10185.174,"end_s":10189.277,"action":"Opened the window type selector and changed the active type from Windows_Dbl_Plain 6' to Windows_Dbl_Plain 9' while viewing the balcony and living area.","intent":"Choose a larger double-window type for the current placement context.","app":"Autodesk Revit","details":"The type list visibly included 6', 8', 9', and other window sizes."},{"start_s":10189.277,"end_s":10199.723,"action":"Selected Windows_Dbl_Plain 8', then repositioned the plan around the balcony, toilet, and living room and used drag and middle-button navigation to adjust or inspect the window placement.","intent":"Continue positioning the selected 8-foot double window in the floor plan.","app":"Autodesk Revit","details":"The final view showed the toilet, balcony, and living room with a temporary dimension near the wall."},{"start_s":10199.723,"end_s":10209.898,"action":"Switched to Autodesk Revit, scrolled and zoomed around the floor plan, and selected a window placement location near the bedroom and toilet area.","intent":"Position and prepare a window for placement in the floor plan.","app":"Autodesk Revit","details":"The active type was Windows_Sgl_Plain 2.5', and the view showed the bedroom and TOILET-1."},{"start_s":10209.898,"end_s":10216.601,"action":"Scrolled the window type list while keeping the floor plan centered on the bedroom and TOILET-1.","intent":"Review available window types before choosing one.","app":"Autodesk Revit","details":"The type list displayed sizes including 4', 5', 6', 8', 9', and metric options."},{"start_s":10216.601,"end_s":10221.213,"action":"Selected the Windows_Dbl_Plain 6' type from the list and returned focus to the floor plan.","intent":"Change the active window type for placement.","app":"Autodesk Revit","details":"The selected type was Windows_Dbl_Plain 6'."},{"start_s":10221.213,"end_s":10229.122,"action":"Selected the Windows_Dbl_Plain 5' type, zoomed toward the upper bedroom wall, and clicked the wall area to place or position the window.","intent":"Adjust the window size and position it on the bedroom wall.","app":"Autodesk Revit","details":"The view zoomed in on the window above the bedroom; temporary dimensions appeared after the placement click."},{"start_s":10229.122,"end_s":10236.985,"action":"Selected the Windows_Sgl_Plain 2.5' type, navigated downward through the floor plan, and zoomed to review the master bedroom, dressing area, and attached toilets.","intent":"Continue reviewing or positioning windows in another part of the floor plan.","app":"Autodesk Revit","details":"The final view showed M. TOILET, DRESS, and M.BED ROOM areas."},{"start_s":10236.985,"end_s":10251.25,"action":"Scrolled and reviewed the floor plan around the master bedroom, dressing room, and M. TOILET while browsing window types in the Properties panel.","intent":"Inspect the selected window context and available types without a confirmed placement.","app":"Autodesk Revit","details":"The type browser showed Windows_Sgl_Plain options and a hover preview for Windows_Sgl_Plain : RO."},{"start_s":10251.25,"end_s":10259.208,"action":"Scrolled and zoomed around the bathroom and dressing area, then clicked in the plan while the Place Window tool remained active.","intent":"Inspect and position a window in the floor plan.","app":"Autodesk Revit","details":"Selected type Windows_Sgl_Plain 2.5'; no confirmed placement was completed."},{"start_s":10259.208,"end_s":10267.471,"action":"Scrolled downward across the floor plan from the dressing area into the M.BED ROOM and BED ROOM-2, clicking in the view while placing windows.","intent":"Navigate to another room and continue window placement.","app":"Autodesk Revit","details":"Window type shown as Windows_Dbl_Plain 6'."},{"start_s":10267.471,"end_s":10271.722,"action":"Opened the window type list, reviewed available sizes, selected the 2.5' single-window type, and clicked the plan near BED ROOM-2.","intent":"Change the window type before placing another window.","app":"Autodesk Revit","details":"Type list visibly included Windows_Sgl_Plain sizes and 2.5' was selected."},{"start_s":10271.722,"end_s":10280.356,"action":"Selected the 4' window type and clicked along the lower wall near BED ROOM-2 and TOILET-2 while panning right across the plan.","intent":"Place or position a larger window along the room exterior wall.","app":"Autodesk Revit","details":"The view moved to show BED ROOM-2, TOILET-2, utility, and adjacent sink area."},{"start_s":10280.356,"end_s":10297.067,"action":"Scrolled and panned across TOILET-2, the wide utility room, kitchen, and lobby, clicking in the plan and changing the active window type to 2'.","intent":"Navigate through the plan and continue selecting window locations and sizes.","app":"Autodesk Revit","details":"Final view showed the broader kitchen, lobby, and GOOD'S LIFT area."},{"start_s":10297.067,"end_s":10306.892,"action":"Scrolled to the stair and lobby area, opened the window type list, selected the 4' type, clicked near the stair window, and pressed Escape several times.","intent":"Inspect and adjust a window near the stair before exiting placement mode.","app":"Autodesk Revit","details":"The final view focused on the stair labeled Dn/Up and an exterior window; placement completion is not confirmed."},{"start_s":10306.892,"end_s":10326.892,"action":"Returned to Autodesk Revit and displayed the PROJECT 11 3D view, leaving the building model visible; selected a wall near the end of the interval.","intent":"Inspect the 3D building model.","app":"Autodesk Revit","details":"3D View: {3D} remained open."},{"start_s":10326.892,"end_s":10341.917,"action":"Pressed and held the middle mouse button in the 3D view, rotating the model to a close overhead view.","intent":"Reorient the 3D model for inspection.","app":"Autodesk Revit","details":"The view changed from an oblique overall view to a close top-down view."},{"start_s":10341.917,"end_s":10352.109,"action":"Continued navigating the 3D view with middle-button actions and scroll input, then selected a window element in the model.","intent":"Inspect and select a window in the 3D model.","app":"Autodesk Revit","details":"A window was selected near the end, and the Properties panel identified Windows_Sgl_Plain."},{"start_s":10352.109,"end_s":10362.179,"action":"Edited the selected window type property, entered 6' and confirmed it, then continued navigating and selected another window.","intent":"Modify a window dimension and inspect another window.","app":"Autodesk Revit","details":"The active selection remained a Windows_Sgl_Plain element; the interval ended with a Type Properties window transition."},{"start_s":10362.179,"end_s":10377.511,"action":"Opened Type Properties for Windows_Sgl_Plain, changed the type field to 2.5' and confirmed the entry, then clicked the dialog controls.","intent":"Update the window type dimensions.","app":"Autodesk Revit","details":"Type Properties showed the 2.5' type with Width 2.500' and Height 2.500'."},{"start_s":10377.511,"end_s":10386.117,"action":"Returned to the 3D view, navigated with middle-button and scroll input, and selected a window on the building façade.","intent":"Inspect the modified window in the 3D model.","app":"Autodesk Revit","details":"The selected element was Windows_Sgl_Plain, type 2.5', with Mark 15 visible in Properties."},{"start_s":10386.117,"end_s":10395.773,"action":"Manipulated the Autodesk Revit 3D view with clicks and scroll gestures, changing the camera to inspect the brick wall and window model; selected a window near the end.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"3D view of PROJECT 11; a Windows_Dbl_Plain element is selected at the end."},{"start_s":10395.773,"end_s":10414.995,"action":"Continued orbiting and zooming the Revit 3D view with middle-button clicks and scroll gestures, moving from a close wall view to a broader angled view of the building interior and exterior walls.","intent":"Review the building layout from different 3D perspectives.","app":"Autodesk Revit","details":"The view ends on an angled overview of the brick wall layout."},{"start_s":10414.995,"end_s":10424.935,"action":"Orbited and zoomed the 3D model, then clicked several wall or window areas and pressed Escape to clear selections or exit commands; ended with a close-up view and a selected window.","intent":"Inspect individual building elements in the 3D model.","app":"Autodesk Revit","details":"A Windows_Sgl_Plain element is selected in the final evidence."},{"start_s":10424.935,"end_s":10435.015,"action":"Continued rotating and zooming around the brick building model, selected wall/window regions, and pressed Escape to dismiss selection or command states.","intent":"Examine another section of the 3D building model.","app":"Autodesk Revit","details":"The view shifts toward the back side and ends with a selected Windows_Dbl_Plain element."},{"start_s":10435.015,"end_s":10445.105,"action":"Navigated through the 3D model with repeated orbit and zoom gestures, briefly cleared selections with Escape, and inspected wall and window areas from a wider left-side perspective.","intent":"Continue reviewing the building geometry and openings.","app":"Autodesk Revit","details":"The final view shows a broad brick-wall layout with no visible active selection."},{"start_s":10445.105,"end_s":10458.213,"action":"Continued navigating the 3D view, then clicked the GL view tab to switch to the Floor Plan: GL view; selected the raster image underlay and adjusted the view to show the floor-plan image.","intent":"Switch from 3D inspection to review of the GL floor plan.","app":"Autodesk Revit","details":"Title changes to PROJECT 11 - Floor Plan: GL; the final screen shows a selected raster floor-plan image."},{"start_s":10458.213,"end_s":10474.58,"action":"Switched to Revit, navigated around the GL floor plan with scrolls and middle-button view movements, and selected the raster image before returning to the floor-plan view.","intent":"Inspect the floor-plan raster image and surrounding layout.","app":"Autodesk Revit","details":"The view showed labeled kitchen, bedroom, toilet, and utility areas."},{"start_s":10474.58,"end_s":10488.326,"action":"Navigated to another area of the GL floor plan, selected a window, and entered a 6-foot value while editing the window.","intent":"Modify a selected window dimension or placement.","app":"Autodesk Revit","details":"A Windows_Sgl_Plain window was selected; the view ended focused on two toilets and adjacent bedrooms."},{"start_s":10488.326,"end_s":10496.608,"action":"Opened Type Properties for the Windows_Sgl_Plain window, edited the highlighted dimension to 2 feet, and clicked Apply/OK.","intent":"Change the window type dimension.","app":"Autodesk Revit","details":"The Type Properties dialog showed the Rough Height changing from approximately 2.986 feet to 2 feet."},{"start_s":10496.608,"end_s":10515.435,"action":"Returned to the floor plan, reviewed the updated window in the toilet area, and zoomed or panned out to inspect more of the building layout.","intent":"Review the window change in context.","app":"Autodesk Revit","details":"The view expanded from the toilet and bedrooms to show multiple floor-plan areas and the 3BHK label."},{"start_s":10515.435,"end_s":10525.421,"action":"Panned and zoomed across the raster floor plan, moving from the upper bedroom and toilet area through the dining and kitchen spaces to a broader view including the lobby and stairs.","intent":"Inspect the overall floor-plan arrangement.","app":"Autodesk Revit","details":"Visible labels included bedrooms, toilets, pooja, dining, kitchen, utility, lobby, and stair areas."},{"start_s":10525.421,"end_s":10539.011,"action":"Selected the raster image and continued panning and zooming across the GL floor plan, ending on a wider view of the bedrooms, dining, drawing, kitchen, lobby, lifts, and stairs.","intent":"Review the complete floor-plan image and surrounding layout.","app":"Autodesk Revit","details":"The raster image remained selected with Draw Layer set to Background."},{"start_s":10539.011,"end_s":10543.543,"action":"Switched to Autodesk Revit, navigated the GL floor plan, and activated the Place Window tool with the Windows_Dbl_Plain 4' type selected.","intent":"Prepare to place a window in the floor plan.","app":"Autodesk Revit","details":"The view shows the kitchen, utility, and master bedroom areas."},{"start_s":10543.543,"end_s":10557.272,"action":"Zoomed and panned toward the master toilet and utility area, then changed the active window type to Windows_Sgl_Plain 2.5'.","intent":"Position and configure a window for placement near the toilet and utility area.","app":"Autodesk Revit","details":"The Place Window tool remained active and the view became focused on the master toilet."},{"start_s":10557.272,"end_s":10570.231,"action":"Panned and zoomed across the master bedroom, then selected the GL floor plan in the Project Browser and returned to the window placement tool.","intent":"Navigate to another wall location for window placement.","app":"Autodesk Revit","details":"The view moved from the toilet area to the master bedroom and adjacent walls."},{"start_s":10570.231,"end_s":10582.286,"action":"Reviewed the master bedroom area, zoomed toward its upper-left wall, and changed the active window type to Windows_Dbl_Plain 4'.","intent":"Configure a larger window for the master bedroom wall.","app":"Autodesk Revit","details":"The master bedroom label and upper wall are visible in the plan."},{"start_s":10582.286,"end_s":10591.093,"action":"Zoomed out and panned upward across the master bedroom, dining area, and wide balcony, then changed the active window type to Windows_Dbl_Plain 8'.","intent":"Navigate and configure a larger window in the upper portion of the plan.","app":"Autodesk Revit","details":"The dining room, balcony, kitchen, and master bedroom are visible."},{"start_s":10591.093,"end_s":10596.354,"action":"Panned and zoomed to Bed Room-1 and Toilet-1, leaving the Place Window tool active with Windows_Dbl_Plain 2.5' selected.","intent":"Position the view for a window placement near Bed Room-1.","app":"Autodesk Revit","details":"The final view centers on Bed Room-1 and the adjacent Toilet-1."},{"start_s":10596.354,"end_s":10616.354,"action":"Activated Autodesk Revit and resized the window while the Window placement tool remained active over the GL floor plan.","intent":"Continue placing or adjusting windows in the floor plan.","app":"Autodesk Revit","details":"View showed Bed Room-1 and Toilet-1 with Modify | Place Window active."},{"start_s":10616.354,"end_s":10624.841,"action":"Clicked in the floor plan, then panned the view rightward to show Toilet-2 and the adjacent bathroom area while keeping window placement active.","intent":"Position the floor-plan view for window placement.","app":"Autodesk Revit","details":"The view shifted from Bed Room-1/Toilet-1 toward Toilet-2."},{"start_s":10624.841,"end_s":10642.174,"action":"Scrolled and clicked in the plan to navigate around the upper bathroom and shaft area, then selected or positioned a window near the bathroom wall.","intent":"Inspect and place or adjust windows around the bathroom and shaft.","app":"Autodesk Revit","details":"The view showed ODU/Shaft annotations, bathroom fixtures, and temporary dimensions."},{"start_s":10642.174,"end_s":10648.171,"action":"Scrolled across the floor plan and opened the window type list in the Properties panel, leaving Windows_Sgl_Plain 2' selected while the view remained centered on Toilet-2.","intent":"Choose a window type for the active placement operation.","app":"Autodesk Revit","details":"The visible type list included several window sizes and Windows_Sgl_Plain 2'."},{"start_s":10648.171,"end_s":10654.419,"action":"Selected the Windows_Sgl_Plain 2.5' type from the Properties list, then navigated the view toward the adjacent bedroom and bathroom wall.","intent":"Change the active window size and prepare its placement.","app":"Autodesk Revit","details":"Properties showed Windows_Sgl_Plain 2.5' and a temporary dimension appeared in the plan."},{"start_s":10654.419,"end_s":10662.048,"action":"Scrolled and clicked around the adjacent bedroom, then panned downward to reveal Bed Room-2 and its nearby doorway and window openings.","intent":"Continue positioning windows while inspecting the next room area.","app":"Autodesk Revit","details":"The final view showed Bed Room-2 labeled 10' 0\" x 12' 0\" with Modify | Place Window still active."},{"start_s":10662.048,"end_s":10671.673,"action":"Switched to Revit, navigated the GL floor plan, and entered Place Window mode with a window preview active near the plan area.","intent":"Prepare to place or adjust a window in the floor plan.","app":"Autodesk Revit","details":"Visible type is Windows_Wdbl_Plain; the view was zoomed or panned while window placement remained active."},{"start_s":10671.673,"end_s":10682.032,"action":"Adjusted the active window placement in the GL floor plan, zoomed and panned around the opening, then exited the placement interaction and switched to the 3D view.","intent":"Position or inspect the window within the model.","app":"Autodesk Revit","details":"The 3D view became active near the end of the span."},{"start_s":10682.032,"end_s":10692.078,"action":"Navigated the Revit 3D model with middle-button view controls, then selected a window in the model and resized the windowed Revit interface.","intent":"Inspect the model and select a window for editing.","app":"Autodesk Revit","details":"The selected element is shown as Windows_Sgl_Plain in the 3D view."},{"start_s":10692.078,"end_s":10702.412,"action":"Edited selected window properties, entering and confirming 6-foot values in the visible fields for successive window selections.","intent":"Set window dimensions or related height parameters.","app":"Autodesk Revit","details":"The Properties palette shows selected Windows_Sgl_Plain elements with level GL and changing sill/head-related values."},{"start_s":10702.412,"end_s":10712.624,"action":"Exited the property-edit interaction, navigated and zoomed the 3D view, then initiated a save command before switching to Windows Explorer.","intent":"Save the Revit model and move to another application.","app":"Autodesk Revit","details":"The model remained visible in a zoomed-out 3D view; the final application transition was to Windows Explorer."},{"start_s":10712.624,"end_s":10729.497,"action":"Returned to the Revit 3D view after the application transition and rotated or navigated the building model to a different perspective.","intent":"Inspect the updated building model from another 3D angle.","app":"Autodesk Revit","details":"The 3D view shows the pink wall layout and window openings from progressively changed viewpoints."},{"start_s":10729.497,"end_s":10738.913,"action":"Switched within Autodesk Revit from the 3D view to the GL floor plan, then selected the raster floor-plan image and adjusted the view.","intent":"Navigate to and inspect the GL floor plan and its raster reference.","app":"Autodesk Revit","details":"The GL floor plan displays a raster apartment layout after the view transition."},{"start_s":10738.913,"end_s":10755.227,"action":"Switched between the GL floor plan and 3D view, selected a wall in the 3D model, and then returned to the raster floor-plan view with the image zoomed into the kitchen and utility area.","intent":"Inspect the relationship between the modeled wall and the floor-plan reference.","app":"Autodesk Revit","details":"A wall is selected in the 3D view; the final view shows the raster image around the kitchen, utility, and bathroom."},{"start_s":10755.227,"end_s":10765.372,"action":"Switched to the 3D view, navigated the model with middle-mouse view controls, and zoomed or panned around the selected wall area.","intent":"Review the modeled wall geometry in 3D.","app":"Autodesk Revit","details":"The 3D view shows the wall selected while the camera position changes."},{"start_s":10765.372,"end_s":10782.144,"action":"Navigated around the 3D model with repeated middle-mouse view controls, then switched back to the GL floor plan and adjusted the raster reference view.","intent":"Inspect different portions of the model and compare them with the floor-plan reference.","app":"Autodesk Revit","details":"The 3D view shows interior walls and doors; the final view returns to the raster kitchen and utility area."},{"start_s":10782.144,"end_s":10791.86,"action":"Zoomed and panned across the GL raster floor plan, typed “DR” to search or filter door types, and activated the Place Door tool with a door type selected.","intent":"Prepare to place a door using the floor-plan reference.","app":"Autodesk Revit","details":"The Place Door contextual ribbon is active and the selected type is Doors_ExtSgl_w-Glazing_Bars_1, 3.5'."},{"start_s":10791.86,"end_s":10796.651,"action":"Opened the door-type dropdown, reviewed the available door families and sizes, and selected the Doors_IntSgl 2.5' DOOR type while remaining in Place Door mode.","intent":"Choose an appropriate door type before placement.","app":"Autodesk Revit","details":"The final Properties panel shows Doors_IntSgl, 2.5' DOOR; no door placement is visibly completed."},{"start_s":10796.651,"end_s":10808.495,"action":"Switched to Revit, navigated the GL floor plan around the master bedroom and toilet, and continued positioning a door instance while zooming and panning.","intent":"Place or inspect a door near the master bedroom/toilet area.","app":"Autodesk Revit","details":"Door placement mode was active for the Doors_IntSgl 3' door."},{"start_s":10808.495,"end_s":10826.83,"action":"Changed the active door type to the 2.5' door, zoomed and panned around the master toilet entrance, and selected or positioned the door against the wall.","intent":"Adjust the door size and placement at the master toilet entrance.","app":"Autodesk Revit","details":"The view ended zoomed into the master bedroom and toilet with temporary dimensions visible."},{"start_s":10826.83,"end_s":10836.404,"action":"Navigated to the drawing room and adjacent bedroom area, switched the active type back to the 3' door, and zoomed toward the bedroom/dining-side doorway.","intent":"Prepare a door placement in another area of the floor plan.","app":"Autodesk Revit","details":"The floor plan showed Drawing, Bed Room-1, Toilet-1, Pooja, and Dining areas."},{"start_s":10836.404,"end_s":10849.029,"action":"Exited temporary view/isolation states, resized and moved the Revit window, then zoomed and panned across the drawing room and lobby while remaining in door placement mode.","intent":"Review the broader floor-plan context and locate another door position.","app":"Autodesk Revit","details":"Temporary Hide/Isolate was visible initially; the view ended centered on the lobby, drawing room, and bedroom."},{"start_s":10849.029,"end_s":10859.338,"action":"Scrolled and selected the Doors_ExtSgl_w-Glazing_Bars_1 3.5' door type, then zoomed into the drawing-room entrance and attempted to position it.","intent":"Choose and place an exterior glazed door near the drawing room entrance.","app":"Autodesk Revit","details":"A geometry-collision warning indicated that the selected elements might not be copied."},{"start_s":10859.338,"end_s":10872.73,"action":"Zoomed out to review most of the GL floor plan, typed a search or navigation shortcut, and selected the 3.5' glazed door type again while leaving placement mode active.","intent":"Review the overall layout and continue preparing the selected door for placement.","app":"Autodesk Revit","details":"The final view showed the full central plan with drawing room, bedrooms, toilets, dining, kitchen, and utility areas."},{"start_s":10872.73,"end_s":10882.531,"action":"Selected a door type in Revit and navigated the floor plan by scrolling and middle-clicking, zooming into the bedroom and toilet area while keeping door placement active.","intent":"Position the floor plan for placing an interior door.","app":"Autodesk Revit","details":"Revit displayed the GL floor plan with door placement mode active."},{"start_s":10882.531,"end_s":10892.18,"action":"Changed the active door type, panned and zoomed across the dining, pooja, bedroom, and toilet areas, then pressed Space and Esc while continuing to position the door preview.","intent":"Adjust the door type and view location for a potential placement.","app":"Autodesk Revit","details":"The door placement prompt remained active; no completed placement is clearly visible."},{"start_s":10892.18,"end_s":10904.425,"action":"Selected another door type, navigated toward Toilet-2 with scrolling and middle-click panning, and positioned the door preview near the toilet doorway.","intent":"Prepare an interior door placement near Toilet-2.","app":"Autodesk Revit","details":"Temporary dimensions appeared near the Toilet-2 area while placement mode remained active."},{"start_s":10904.425,"end_s":10914.693,"action":"Selected the 2.5-foot door type, panned and zoomed into the kitchen and wide utility area, and moved the active door preview along the utility-side wall.","intent":"Position a smaller interior door in the kitchen/utility area.","app":"Autodesk Revit","details":"The view showed the kitchen, utility, refrigerator, washing machine, and dishwasher with the door placement prompt visible."},{"start_s":10914.693,"end_s":10923.784,"action":"Panned and zoomed out across the dining, kitchen, balcony, and bedroom portions of the floor plan using middle-mouse navigation.","intent":"Review and reposition the floor plan while keeping door placement active.","app":"Autodesk Revit","details":"The active 3-foot door type and placement mode remained visible."},{"start_s":10923.784,"end_s":10937.453,"action":"Waited with the Revit floor plan displayed, then middle-clicked to pan slightly across the dining and kitchen area.","intent":"Continue positioning the view for door placement.","app":"Autodesk Revit","details":"No completed door placement is clearly shown during this interval."},{"start_s":10937.453,"end_s":10948.05,"action":"Switched from the GL floor plan to the Revit 3D view and zoomed or navigated from a close-up of the brick walls to a different model area.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"The view changed from a furnished floor plan to a close brick-wall 3D view while Door placement mode remained active."},{"start_s":10948.05,"end_s":10957.913,"action":"Navigated the Revit 3D view with middle-button movements and scrolling, moving from a close-up of individual doors and walls to a wide view of the building layout.","intent":"Review the overall 3D building geometry and door placement.","app":"Autodesk Revit","details":"The final view showed a zoomed-out multi-room brick building model."},{"start_s":10957.913,"end_s":10968.698,"action":"Returned to the GL floor plan, scrolled the plan, and clicked the raster floor-plan image until it became selected.","intent":"Inspect and select the floor-plan underlay.","app":"Autodesk Revit","details":"The raster image underlay was selected, with Modify | Raster Images controls visible."},{"start_s":10968.698,"end_s":10973.092,"action":"Worked with the selected raster image and opened its Draw Layer control, leaving the layer list expanded with Foreground and Background options visible.","intent":"Adjust or inspect the raster image display layer.","app":"Autodesk Revit","details":"The floor plan remained centered around Toilet-1 and the adjacent bedrooms."},{"start_s":10973.092,"end_s":10985.162,"action":"Scrolled and navigated the GL floor plan toward the stair and lift area, then exited raster-image selection and activated Door placement mode.","intent":"Move to another floor-plan area and prepare to place a door.","app":"Autodesk Revit","details":"The final view showed the drawing room, lifts, stair area, and surrounding rooms with Doors_IntSgl placement active."},{"start_s":10985.162,"end_s":10994.97,"action":"Scrolled and panned across the GL floor plan, selected a different door type, and positioned or attempted door placement near the Drawing room doorway.","intent":"Place or inspect a door in the floor plan.","app":"Autodesk Revit","details":"The selected type was Doors_ExtSgl_w-Glazing_Bars_1 3.5', and the status bar reported a geometry collision at the end."},{"start_s":10994.97,"end_s":11005.161,"action":"Activated Revit's door placement tool, navigated and zoomed around the floor plan, and left a door preview active near the bedroom and passage area.","intent":"Continue placing interior doors in the floor plan.","app":"Autodesk Revit","details":"The view changed from a broader apartment plan to a close-up around Bedroom 1 and the Pooja area; no confirmed placement is visible."},{"start_s":11005.161,"end_s":11025.078,"action":"Panned and zoomed across the floor plan from the bedroom area to the kitchen, utility, and master-bedroom region while keeping the interior door tool active.","intent":"Inspect candidate wall locations for additional door placement.","app":"Autodesk Revit","details":"The final view shows the drawing, dining, kitchen, utility, and master-bedroom areas with a door preview visible."},{"start_s":11025.078,"end_s":11035.671,"action":"Selected the 2.5-foot interior door type, zoomed into the master toilet, and interacted with the plan near its doorway; resized the Revit window and pressed Escape.","intent":"Choose a smaller interior door and position or review it at the master toilet entrance.","app":"Autodesk Revit","details":"The selected type is shown as Doors_IntSgl 2.5' DOOR; no completed placement is clearly confirmed."},{"start_s":11035.671,"end_s":11043.44,"action":"Typed a short search or command sequence, then panned and zoomed from the master toilet toward the master bedroom and kitchen area while the door placement context remained active.","intent":"Navigate and inspect adjacent plan areas for door placement.","app":"Autodesk Revit","details":"The view ends showing the master bedroom, master toilet, utility, and part of the kitchen."},{"start_s":11043.44,"end_s":11053.351,"action":"Clicked and zoomed into the upper bathroom area, moving the view from Toilet-2 to Toilet-1 and keeping the 2.5-foot door type active.","intent":"Inspect bathroom doorway locations for the selected interior door.","app":"Autodesk Revit","details":"The final close-up centers on Toilet-1 with door-swing graphics and temporary dimensions visible."},{"start_s":11053.351,"end_s":11071.67,"action":"Zoomed out to review the apartment plan, pressed Escape to leave the active interaction, then panned across the broader floor plan and clicked another door-type entry.","intent":"Review the overall layout and prepare to continue door work in another area.","app":"Autodesk Revit","details":"A geometry-collision warning is visible during the broader review, and the final view shows a different portion of the floor plan with the door placement tool active again."},{"start_s":11071.67,"end_s":11083.599,"action":"Switched to Autodesk Revit, navigated the GL floor plan by scrolling and panning, and activated the Door placement tool with the Doors_ExtSgl_w-Glazing_Bars_1 3.5' type selected.","intent":"Prepare to place a door in the floor plan.","app":"Autodesk Revit","details":"The view moved across the drawing and dining areas; Revit reported a possible geometry collision."},{"start_s":11083.599,"end_s":11093.026,"action":"Changed the active door type to Doors_IntSgl 3' DOOR, then zoomed and panned around the drawing, dining, bedroom, dress, and kitchen areas while remaining in Place Door mode.","intent":"Review the plan and position the view for door placement.","app":"Autodesk Revit","details":"No completed placement is clearly visible."},{"start_s":11093.026,"end_s":11103.491,"action":"Panned and zoomed through the GL floor plan from the dress and pooja areas toward the upper-floor bedroom, living, balcony, and toilet areas while keeping door placement active.","intent":"Navigate to another location in the plan for door placement.","app":"Autodesk Revit","details":"The view ended on the upper-floor bedroom and living area."},{"start_s":11103.491,"end_s":11121.327,"action":"Continued panning and zooming around the upper-floor plan, including the living room, bedrooms, toilets, dining, and drawing areas, and then switched focus back to the Revit window.","intent":"Inspect additional plan locations while preparing door placement.","app":"Autodesk Revit","details":"Door placement mode remained active; no definite new door placement is shown."},{"start_s":11121.327,"end_s":11131.481,"action":"Switched to the GL floor plan, changed the active type to Doors_IntSgl 2.5' DOOR, and zoomed toward Bedroom-1, Living, and Toilet-1 while navigating the view.","intent":"Select a narrower door type and position it near the bedroom and toilet entry.","app":"Autodesk Revit","details":"The selected door type and plan view changed, but placement completion is not evident."},{"start_s":11131.481,"end_s":11141.418,"action":"Exited the active door placement interaction, selected a placed 2.5' door near the Dress and M.Toilet area, and then returned to a broader GL floor-plan view.","intent":"Inspect or adjust an existing door instance in the plan.","app":"Autodesk Revit","details":"The selected door showed dimensions and a geometry-collision warning before the view was deselected."},{"start_s":11141.418,"end_s":11152.345,"action":"Scrolled and navigated the GL floor plan, entered door placement mode, and positioned a door near Toilet-2; the view then zoomed out to show the surrounding rooms.","intent":"Place or adjust a door in the floor plan.","app":"Autodesk Revit","details":"A Doors_IntSgl 2.5' door is selected and shown near Toilet-2."},{"start_s":11152.345,"end_s":11165.449,"action":"Exited door placement, clicked and scrolled through the GL floor plan, and zoomed out to review the drawing, dining, kitchen, bedroom, and lobby areas.","intent":"Review the floor plan layout.","app":"Autodesk Revit","details":"The view ends with the overall lower portion of the plan visible, including the 3BHK 1723 Sqft label."},{"start_s":11165.449,"end_s":11173.575,"action":"Navigated across the floor plan with clicks and scrolling, entered door placement mode, and selected a door type from the left Properties panel.","intent":"Prepare to place another door.","app":"Autodesk Revit","details":"Door placement mode is active with Doors_IntSgl 2.5' DOOR selected."},{"start_s":11173.575,"end_s":11181.852,"action":"Switched back to Revit, zoomed and panned around the lobby and drawing areas, then selected an exterior door type and continued navigating the plan.","intent":"Select and position a different door type.","app":"Autodesk Revit","details":"The selected type is Doors_ExtSgl_w-Glazing Bars_1 3.5'."},{"start_s":11181.852,"end_s":11195.033,"action":"Scrolled and navigated toward the kitchen, Pooja, and Toilet-2 areas, selected a 3' interior door type, and continued positioning or reviewing the door placement.","intent":"Place or adjust an interior door in the lower floor-plan area.","app":"Autodesk Revit","details":"Door placement mode remains active with Doors_IntSgl 3' DOOR selected."},{"start_s":11195.033,"end_s":11212.231,"action":"Handled the Revit warning and dismissed active commands, then continued clicking and panning through the floor plan while attempting door placement; a warning indicated that the insertion conflicted with a joined wall.","intent":"Resolve or inspect a door placement conflict.","app":"Autodesk Revit","details":"Visible warning: “Insert conflicts in joined Wall.”"},{"start_s":11212.231,"end_s":11222.069,"action":"Activated Revit's door placement tool, selected an interior door type, and zoomed and panned around the floor plan near the bedrooms, dressing area, and dining space.","intent":"Inspect and prepare an interior door for placement in the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Door mode; no completed door placement is visible."},{"start_s":11222.069,"end_s":11238.288,"action":"Zoomed and panned across the floor plan from Bedroom 2 and Toilet-2 toward the kitchen and utility area, then returned to the interior door type list.","intent":"Review possible door placement locations and door types.","app":"Autodesk Revit","details":"The view progressively focused on Toilet-2 and adjacent kitchen fixtures; no completed placement is visible."},{"start_s":11238.288,"end_s":11247.821,"action":"Selected the interior 3' door type, zoomed and panned across the dining, kitchen, and bedroom areas, and ended on a wider view of the apartment plan.","intent":"Inspect the plan while preparing a different interior door size for placement.","app":"Autodesk Revit","details":"Temporary dimension graphics appeared near the kitchen; no completed door placement is visible."},{"start_s":11247.821,"end_s":11256.575,"action":"Selected the interior 2.5' door type, zoomed into Toilet-1 and the adjacent balcony and living area, and reviewed the door-related geometry.","intent":"Examine a smaller interior door option and its potential placement area.","app":"Autodesk Revit","details":"The plan remained in Modify | Place Door mode; no completed placement is visible."},{"start_s":11256.575,"end_s":11260.991,"action":"Resized or repositioned the Windows Shell Experience Host while leaving the Revit floor plan displayed in a zoomed-out apartment view.","intent":"Adjust the desktop window layout without changing the model.","app":"Autodesk Revit","details":"No model interaction or door placement was recorded."},{"start_s":11260.991,"end_s":11280.991,"action":"Remained idle on the zoomed-out Revit floor plan showing the apartment layout and interior door placement mode.","intent":"Pause while reviewing the current floor plan state.","app":"Autodesk Revit","details":"No recorded interaction events occurred during this interval."},{"start_s":11280.991,"end_s":11291.066,"action":"Navigated the Revit floor plan with middle-button panning and scrolling, exited transient commands with Escape, and repositioned the view toward the central stair and lift area.","intent":"Inspect a different portion of the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained open."},{"start_s":11291.066,"end_s":11305.296,"action":"Panned and zoomed across the floor plan, moving from the apartment area toward the lobby, stairs, and lift banks; selected a wall near the lifts, leaving the view tightly zoomed on the lift graphics.","intent":"Inspect and select wall geometry around the lift lobby.","app":"Autodesk Revit","details":"A Basic Wall W7 was selected near the lift area."},{"start_s":11305.296,"end_s":11315.238,"action":"Scrolled and panned around the stair and lift lobby, briefly exiting and re-entering interaction modes while reviewing the surrounding corridors and shafts.","intent":"Review the stair, lift, and adjacent circulation layout.","app":"Autodesk Revit","details":"The floor plan view remained focused on the lift bank and stairs."},{"start_s":11315.238,"end_s":11331.761,"action":"Panned and zoomed into the stair and lobby junction, selected a wall segment, dragged within the plan, then typed “DR” and switched into door placement mode.","intent":"Prepare to place a door near the stair and lobby circulation area.","app":"Autodesk Revit","details":"The view ended in Modify | Place Door mode with a Doors_IntSgl 2.5' DOOR type shown."},{"start_s":11331.761,"end_s":11341.736,"action":"Activated door placement, adjusted the view around the stair and pressurized shafts, selected the door context, and opened the door Type Properties workflow.","intent":"Configure the door type before placement.","app":"Autodesk Revit","details":"The selected family was Doors_IntSgl, initially showing a 3' DOOR type."},{"start_s":11341.736,"end_s":11350.941,"action":"Renamed the door type to 3.5' and edited the Rough Width value to 3.5', confirming each text entry with Enter.","intent":"Create and size a 3.5-foot door type.","app":"Autodesk Revit","details":"Type Properties for Doors_IntSgl remained open with type 3.5'."},{"start_s":11350.941,"end_s":11366.843,"action":"Exited the active door-edit state, navigated the GL floor plan, and adjusted the view around the lobby and stair area.","intent":"Review the floor-plan layout and reposition the view.","app":"Autodesk Revit","details":"The view changed from a selected door near the lobby to a broader lobby and shaft view."},{"start_s":11366.843,"end_s":11376.36,"action":"Opened the door type selector, reviewed available door types, and manipulated the selected lobby door while zooming and panning around it.","intent":"Inspect or adjust the lobby door type and placement.","app":"Autodesk Revit","details":"The selector displayed Doors_IntSgl and related door types; the 3' door remained selected in the plan."},{"start_s":11376.36,"end_s":11389.456,"action":"Panned and zoomed across the GL floor plan, then activated Place Door with the 3' door type ready for placement.","intent":"Prepare to place another interior door in the floor plan.","app":"Autodesk Revit","details":"The final view showed the stair and wide corridor area with the Place Door tool active."},{"start_s":11389.456,"end_s":11401.059,"action":"Kept Place Door active, navigated to the stair and corridor area, and positioned the door preview near the stair enclosure.","intent":"Position an interior door for placement near the stair corridor.","app":"Autodesk Revit","details":"A 3' Doors_IntSgl door preview and temporary dimensions were visible near the stair opening."},{"start_s":11401.059,"end_s":11411.122,"action":"Exited the placement context and zoomed and panned out across the GL floor plan to review multiple apartment and lobby areas.","intent":"Review the broader floor-plan layout after door work.","app":"Autodesk Revit","details":"The view expanded from the stair area to a wider multi-unit plan showing labeled rooms and lobbies."},{"start_s":11411.122,"end_s":11421.124,"action":"Continued panning and zooming across the GL floor plan, moving from the central stair and lobby region toward upper apartment rooms and the goods lift.","intent":"Inspect additional areas of the floor plan.","app":"Autodesk Revit","details":"The final view showed a lobby, kitchen, utility, goods lift, bedroom, dressing, and toilet areas."},{"start_s":11421.124,"end_s":11439.055,"action":"Navigated and zoomed around the GL floor plan with repeated clicks and scrolls, then typed “DR” and switched to Autodesk Revit. Activated the Place Door tool, leaving a door preview active over the plan.","intent":"Prepare to place an interior door in the floor plan.","app":"Autodesk Revit","details":"GL floor plan visible; Place Door mode active."},{"start_s":11439.055,"end_s":11454.334,"action":"Continued navigating the GL floor plan, zooming into the toilet and bedroom area, and clicked within the plan while the 2.5' door type remained selected. Finished with a wider view showing the bedrooms, dining, drawing, and balcony areas.","intent":"Position the view and door tool for interior door placement.","app":"Autodesk Revit","details":"Place Door mode remained active with Doors_IntSgl 2.5' DOOR selected."},{"start_s":11454.334,"end_s":11466.577,"action":"Zoomed and panned around the bedroom, toilet, pooja, and dining areas, then clicked near door openings while the 3' door type was active. Reviewed the resulting plan view without a clearly confirmed placement.","intent":"Inspect and position a door in the central residential layout.","app":"Autodesk Revit","details":"Door placement preview and temporary dimensions were visible."},{"start_s":11466.577,"end_s":11473.97,"action":"Opened the door type list, selected the glazed exterior door type, and navigated toward the drawing and corridor area with zooming and clicks.","intent":"Change the door type and prepare an exterior door placement.","app":"Autodesk Revit","details":"Doors_ExtSgl_w-Glazing_Bars_1 3.5' selected."},{"start_s":11473.97,"end_s":11484.429,"action":"Kept the glazed exterior door type selected, zoomed and panned across the dining, drawing, kitchen, bedroom, and corridor areas, and clicked near an opening while the door placement tool remained active.","intent":"Position the selected exterior door for placement in the floor plan.","app":"Autodesk Revit","details":"GL floor plan remained in Place Door mode."},{"start_s":11484.429,"end_s":11495.283,"action":"Navigated and zoomed into the kitchen, utility, and master toilet area, then clicked near the toilet and utility openings while changing the active door type back to an interior single door.","intent":"Continue positioning an interior door in the service-area portion of the plan.","app":"Autodesk Revit","details":"Final view focused on M.TOILET and the adjacent 5' wide utility; Doors_IntSgl 2.5' DOOR selected."},{"start_s":11495.283,"end_s":11505.528,"action":"Activated Autodesk Revit and worked in the GL floor plan with a door placement tool active, clicking in the plan and adjusting the view before canceling the operation.","intent":"Place or inspect an interior door in the floor plan.","app":"Autodesk Revit","details":"The plan showed the kitchen, utility, and toilet areas; a door type list was visible before the placement mode was canceled."},{"start_s":11505.528,"end_s":11516.876,"action":"Pressed Escape to exit the door operation, then navigated the GL floor plan by panning and zooming across the dining, drawing, kitchen, utility, and bedroom areas.","intent":"Review different areas of the floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader lower-floor view and ended focused near the utility and corridor."},{"start_s":11516.876,"end_s":11526.623,"action":"Continued panning and zooming out through the GL floor plan, expanding the view from individual rooms to multiple apartment layouts, lobbies, corridors, and stairs.","intent":"Inspect the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The final view showed several 3BHK units and shared circulation spaces."},{"start_s":11526.623,"end_s":11536.53,"action":"Panned and zoomed within the floor plan, then clicked the 3D View control to switch from the GL plan to the project’s {3D} view.","intent":"Inspect the building model in three dimensions.","app":"Autodesk Revit","details":"The title changed to Autodesk Revit 2025.4 - PROJECT 11 - 3D View: {3D}."},{"start_s":11536.53,"end_s":11546.451,"action":"Navigated the 3D view with middle-button panning, orbiting, and zooming, moving from a close wall view to a broader axonometric view of the building’s interior walls and doors.","intent":"Review the 3D building geometry.","app":"Autodesk Revit","details":"The model displayed pink wall geometry with windows and doors against a dark background."},{"start_s":11546.451,"end_s":11556.878,"action":"Continued orbiting, panning, and zooming through the 3D model, moving between an overall building view and closer views of interior rooms, walls, windows, and doors.","intent":"Examine the 3D model from different angles and scales.","app":"Autodesk Revit","details":"The final view was a close axonometric inspection of interior partitions and door elements."},{"start_s":11556.878,"end_s":11568.582,"action":"Navigated the Revit 3D view with middle-button scrolling and clicking, shifting the visible building model.","intent":"Inspect the model in 3D.","app":"Autodesk Revit","details":null},{"start_s":11568.582,"end_s":11578.108,"action":"Navigated and zoomed the 3D view, then switched to the GL floor plan and adjusted its view with scrolling and middle-button navigation.","intent":"Open and inspect the GL floor plan.","app":"Autodesk Revit","details":"The window title changed to Floor Plan: GL."},{"start_s":11578.108,"end_s":11598.108,"action":"Remained idle while viewing the GL floor plan.","intent":"Review the floor plan.","app":"Autodesk Revit","details":null},{"start_s":11598.108,"end_s":11609.348,"action":"Zoomed and navigated the GL floor plan, then activated floor boundary creation from the Modify tools and began selecting a boundary point.","intent":"Create or edit a floor boundary.","app":"Autodesk Revit","details":"The contextual mode changed to Modify | Create Floor Boundary."},{"start_s":11609.348,"end_s":11615.549,"action":"Opened floor Type Properties, initiated Rename, and selected the default type name in the Name dialog.","intent":"Rename or modify the selected floor type.","app":"Autodesk Revit","details":"The type shown was Floor_Timber_22Cbd-225Joist."},{"start_s":11615.549,"end_s":11626.534,"action":"Closed the rename dialog back to the floor plan, then navigated and zoomed the plan while remaining in Create Floor Boundary mode.","intent":"Continue editing the floor boundary.","app":"Autodesk Revit","details":"The floor boundary sketch mode remained active."},{"start_s":11626.534,"end_s":11635.755,"action":"Opened the type name dialog for the floor type, entered “BEDROOM,” and confirmed the name.","intent":"Rename the floor type to BEDROOM.","app":"Autodesk Revit","details":"Type Properties for System Family: Floor."},{"start_s":11635.755,"end_s":11646.834,"action":"Opened Edit Assembly for the BEDROOM floor type, set the structural layer thickness to 128MM and another layer value to 22MM, then confirmed the edits and returned to Type Properties.","intent":"Adjust the BEDROOM floor assembly layer dimensions.","app":"Autodesk Revit","details":"Edit Assembly showed the structural timber joist/rafter layer at 128MM."},{"start_s":11646.834,"end_s":11661.579,"action":"Returned to the GL floor plan and navigated the view with middle-mouse panning, bringing the living room, kitchen, bedroom, and balcony area into view.","intent":"Review the floor plan after modifying the floor type.","app":"Autodesk Revit","details":"Floor plan GL remained in floor boundary creation mode."},{"start_s":11661.579,"end_s":11672.169,"action":"Zoomed and panned around the GL floor plan, then selected wall geometry and began drawing or editing a rectangular floor boundary near the bedroom and living-room area.","intent":"Create or modify the floor boundary in the selected plan region.","app":"Autodesk Revit","details":"The view ended zoomed into the bedroom/living-room boundary with rectangle placement active."},{"start_s":11672.169,"end_s":11682.619,"action":"Panned and zoomed around the plan while placing and adjusting floor-boundary sketch geometry, then used Escape and continued editing the sketch near the bedroom and dining areas.","intent":"Refine the floor boundary sketch.","app":"Autodesk Revit","details":"Modify | Create Floor Boundary remained active and sketch dimensions were visible."},{"start_s":11682.619,"end_s":11693.057,"action":"Navigated and zoomed to another portion of the floor plan, moving from the bedroom area toward the pooja, dining, and adjacent rooms while continuing the floor-boundary editing workflow.","intent":"Inspect and continue the floor boundary around additional rooms.","app":"Autodesk Revit","details":"The final view was a close-up of the pooja and dining area with sketch mode still active."},{"start_s":11693.057,"end_s":11702.947,"action":"Adjusted the floor-boundary sketch while panning across the floor plan, moving the view from the toilet and bedroom area toward the drawing room.","intent":"Continue editing the floor boundary around adjacent rooms.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":11702.947,"end_s":11712.284,"action":"Panned and zoomed around the bathroom and bedroom area, then selected a horizontal sketch line and left it highlighted in the floor-boundary edit.","intent":"Inspect and refine the floor boundary near the bathroom entrance.","app":"Autodesk Revit","details":"A model-line segment was selected in the sketch."},{"start_s":11712.284,"end_s":11722.348,"action":"Worked within the floor-boundary sketch, panning around the bathroom doorway and selecting a nearby line segment before pressing Escape.","intent":"Review or adjust the boundary geometry around the doorway.","app":"Autodesk Revit","details":"The selected sketch line remained visible with temporary dimensions."},{"start_s":11722.348,"end_s":11732.672,"action":"Panned and zoomed across the plan while selecting and reviewing boundary segments, ending on a long horizontal sketch line near the bedroom area.","intent":"Continue checking floor-boundary geometry across the plan.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":11732.672,"end_s":11743.235,"action":"Zoomed out and panned across the floor plan to review multiple rooms and the overall boundary, leaving the sketch in edit mode.","intent":"Inspect the floor boundary at a broader plan view.","app":"Autodesk Revit","details":"The view expanded to show several bedrooms, bathrooms, drawing rooms, and circulation areas."},{"start_s":11743.235,"end_s":11753.286,"action":"Panned and zoomed back into the master bedroom, then selected a wall or boundary element near the bedroom and bathroom; resized the Revit window near the end.","intent":"Inspect the boundary and adjacent wall geometry in the master-bedroom area.","app":"Autodesk Revit","details":"The final view shows the master bedroom with a selected magenta wall boundary."},{"start_s":11753.286,"end_s":11762.829,"action":"Exited transient selections and navigated the GL floor plan by panning and zooming, leaving the floor boundary sketch active around the master bedroom area.","intent":"Inspect and position the floor boundary for continued editing.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":11762.829,"end_s":11772.711,"action":"Zoomed into Bedroom-1, selected the floor boundary region, and began positioning a rectangular sketch segment near the room perimeter before canceling transient actions.","intent":"Adjust the Bedroom-1 floor boundary geometry.","app":"Autodesk Revit","details":"The sketch remained active with Bedroom-1 selected and a rectangle placement prompt visible."},{"start_s":11772.711,"end_s":11783.429,"action":"Canceled the active prompt, selected and dragged sketch geometry, and repositioned the view to show the master bedroom and adjacent toilet while editing the boundary.","intent":"Refine floor boundary lines around the master bedroom.","app":"Autodesk Revit","details":"Boundary lines were highlighted in magenta/cyan and the view was panned across the plan."},{"start_s":11783.429,"end_s":11793.263,"action":"Dragged a floor-boundary segment near the master bedroom, then zoomed and panned across the plan to another master-bedroom area and adjacent dressing space.","intent":"Continue aligning the floor boundary with the room layout.","app":"Autodesk Revit","details":"The edited segment and surrounding room geometry remained visible in Create Floor Boundary mode."},{"start_s":11793.263,"end_s":11803.263,"action":"Panned to the other master bedroom, selected a boundary edge near the dressing area, and dragged it to reposition the sketch line.","intent":"Modify the boundary around the second master bedroom.","app":"Autodesk Revit","details":"A cyan-highlighted horizontal sketch segment was moved along the upper edge of the room."},{"start_s":11803.263,"end_s":11815.006,"action":"Continued dragging and selecting boundary segments while panning toward Toilet-1, Toilet-2, and the adjacent bedroom, leaving a short cyan sketch segment selected near Toilet-2.","intent":"Refine the floor boundary around the toilets and adjacent bedroom.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active; no finish or apply action was shown."},{"start_s":11815.006,"end_s":11824.955,"action":"Navigated around the Revit GL floor plan with middle-click panning and scrolling, moving from the lobby and bedroom area toward the dining and living spaces while remaining in Create Floor Boundary mode.","intent":"Inspect and position the floor plan for boundary editing.","app":"Autodesk Revit","details":"The view remained on the GL floor plan and the boundary-editing interface stayed active."},{"start_s":11824.955,"end_s":11835.971,"action":"Panned and zoomed across the upper bedroom area, then selected the Floor tool and began placing a rectangular floor boundary around the bedroom/toilet region.","intent":"Create a floor element for the bedroom area.","app":"Autodesk Revit","details":"The final view shows a close-up of Toilet-1 and Bed Room-2 with the rectangle placement prompt active."},{"start_s":11835.971,"end_s":11845.717,"action":"Continued panning and zooming around Bed Room-2 and Toilet-2, then adjusted the active rectangular boundary along the bedroom edges.","intent":"Define the floor boundary around the selected bedroom space.","app":"Autodesk Revit","details":"A highlighted rectangular boundary with editable corner grips is visible around Bed Room-2."},{"start_s":11845.717,"end_s":11855.721,"action":"Pressed Escape to exit the prior boundary operation, then panned and zoomed out across the floor plan from the bedroom area toward the central living, dining, kitchen, and utility spaces.","intent":"Review the broader floor layout and reposition for another boundary edit.","app":"Autodesk Revit","details":"The view ends at a wider overview of the apartment plan while Create Floor Boundary mode remains active."},{"start_s":11855.721,"end_s":11864.711,"action":"Navigated to the master bedroom and kitchen area, then started a new rectangular floor-boundary placement and adjusted its corners around the master bedroom.","intent":"Create a floor boundary for the master bedroom.","app":"Autodesk Revit","details":"The master bedroom rectangle is highlighted with corner grips and temporary dimensions."},{"start_s":11864.711,"end_s":11874.471,"action":"Exited the active rectangle placement with Escape, panned and zoomed to Bed Room-1, and began positioning another floor boundary around that bedroom and its adjacent toilets.","intent":"Continue defining floor boundaries for the remaining bedroom area.","app":"Autodesk Revit","details":"The final view shows Bed Room-1 and adjacent toilets with a highlighted boundary edge and the boundary-editing mode still active."},{"start_s":11874.471,"end_s":11891.938,"action":"Navigated and zoomed the Revit floor plan around the bedroom and bathroom area while working in Create Floor Boundary mode.","intent":"Inspect or edit the floor boundary near the upper bedrooms.","app":"Autodesk Revit","details":"The view ended focused on Bedroom 2, Toilet 1, Toilet 2, and the adjacent Pooja area."},{"start_s":11891.938,"end_s":11905.177,"action":"Entered or continued sketching the floor boundary, dragged and adjusted model lines around Bedroom 2, then zoomed out to review the plan.","intent":"Modify and inspect the active floor boundary sketch.","app":"Autodesk Revit","details":"A magenta sketch boundary and cyan reference line were visible around Bedroom 2; a WhatsApp notification appeared near the end."},{"start_s":11905.177,"end_s":11914.861,"action":"Dismissed the notification and panned and zoomed through the floor plan from the upper bedrooms toward the drawing, dining, master bedroom, dressing, and toilet areas.","intent":"Review the floor boundary sketch across other portions of the plan.","app":"Autodesk Revit","details":"The active Create Floor Boundary sketch remained visible while different plan regions were inspected."},{"start_s":11914.861,"end_s":11925.466,"action":"Scrolled and navigated to another apartment area, then selected the boundary near Bedroom 1 and Living and began positioning a rectangular sketch segment.","intent":"Continue laying out the floor boundary around the bedroom and living area.","app":"Autodesk Revit","details":"The view ended zoomed in on the Bedroom 1/Living boundary with the prompt to enter the starting point of a rectangle."},{"start_s":11925.466,"end_s":11935.316,"action":"Scrolled and panned across the plan, selecting and inspecting wall and boundary locations around Bedroom 1, Toilet 1, Living, and the adjacent rooms.","intent":"Refine or verify floor-boundary geometry in the second apartment layout.","app":"Autodesk Revit","details":"The view progressed from a close-up of Bedroom 1 to a wider view labeled 3BHK 1992 Sft."},{"start_s":11935.316,"end_s":11945.066,"action":"Panned and zoomed through the lower apartment layout, clicking boundary and wall locations around the master bedroom, Bedroom 2, toilets, dining, kitchen, and utility areas.","intent":"Continue reviewing or editing the active floor boundary across the remaining plan.","app":"Autodesk Revit","details":"The final view was zoomed into the master bedroom boundary and adjacent Bedroom 2 area."},{"start_s":11945.066,"end_s":11952.436,"action":"Clicked repeatedly around the bedroom boundary, pressed Escape, and scrolled or panned the floor plan while remaining in Create Floor Boundary mode.","intent":"Adjust or inspect the active floor boundary sketch.","app":"Autodesk Revit","details":"The view changed from a close-up bedroom corner to a wider view showing Bedroom-2, adjacent toilets, pooja, and kitchen."},{"start_s":11952.436,"end_s":11963.157,"action":"Clicked the lower-right portion of the bedroom boundary and pressed Escape, leaving the rectangular sketch visible with temporary dimensions and endpoints.","intent":"Complete or revise the bedroom floor-boundary segment.","app":"Autodesk Revit","details":"Temporary dimensions showed approximately 9.976 and the boundary remained active."},{"start_s":11963.157,"end_s":11973.282,"action":"Scrolled and middle-dragged to pan across the floor plan, then clicked boundary locations while navigating from Bedroom-2 toward the dining, drawing, master-bedroom, and kitchen areas.","intent":"Navigate the plan and inspect or continue the floor-boundary sketch.","app":"Autodesk Revit","details":"The view ended centered on the master bedroom, kitchen, utility area, and adjacent spaces."},{"start_s":11973.282,"end_s":11983.801,"action":"Clicked and panned across multiple boundary locations, zoomed the plan, and selected a floor-boundary segment; Revit then switched to a Warning window.","intent":"Continue editing and validate the floor boundary.","app":"Autodesk Revit","details":"The selected boundary was shown in magenta, and the transition ended on a Revit warning."},{"start_s":11983.801,"end_s":11993.568,"action":"Returned to the Revit floor-boundary sketch, pressed Escape several times, typed 'TR', clicked and dragged around boundary lines, and navigated between close-up areas of the plan.","intent":"Modify or trim overlapping floor-boundary lines.","app":"Autodesk Revit","details":"A warning stated that highlighted lines overlap and may not form closed loops; the view later showed close-ups near Toilet-2 and Bedroom-2."},{"start_s":11993.568,"end_s":12003.415,"action":"Dragged across the plan, then scrolled and middle-dragged to zoom out and pan, pressing Escape during navigation.","intent":"Review the floor-boundary layout at broader scales.","app":"Autodesk Revit","details":"The final view showed a wider portion of the floor plan, including Bedroom-1, Bedroom-2, toilets, pooja, dining, drawing, dress, lobby, and the 3BHK 1882 Sq. Ft. label."},{"start_s":12003.415,"end_s":12013.307,"action":"Navigated the GL floor plan with middle-clicks and scrolls, panning across the apartment layout while remaining in Create Floor Boundary mode.","intent":"Review or position the floor plan for boundary editing.","app":"Autodesk Revit","details":"Floor BEDROOM on level GL remained selected."},{"start_s":12013.307,"end_s":12022.799,"action":"Continued panning and zooming around the GL floor plan, then selected the floor so the contextual Modify | Floors tools appeared; resized the Revit window near the end.","intent":"Inspect the floor layout and prepare the selected floor for editing.","app":"Autodesk Revit","details":"The final view showed multiple cyan-highlighted rooms and the selected floor."},{"start_s":12022.799,"end_s":12037.24,"action":"Selected a wall or floor-plan element, entered 150 followed by MM and Enter in an active field, then briefly switched to the Windows notification overlay before returning to Revit.","intent":"Enter a measurement value while editing the floor-plan model.","app":"Autodesk Revit","details":"A WhatsApp notification appeared in the Windows Shell Experience Host."},{"start_s":12037.24,"end_s":12045.633,"action":"Returned to Revit and panned and zoomed across the GL floor plan; pressed Escape and continued navigating, with brief window movement and resizing.","intent":"Review different portions of the floor plan after the edit.","app":"Autodesk Revit","details":"The floor remained selected and cyan room highlights were visible."},{"start_s":12045.633,"end_s":12060.667,"action":"Selected the raster image underlay in the GL plan, changing the view to Raster Images tools, and left the underlay selected while the window was briefly hidden and restored.","intent":"Inspect or adjust the floor-plan raster underlay.","app":"Autodesk Revit","details":"Properties identified a raster image underlay for the first-floor plan."},{"start_s":12060.667,"end_s":12070.111,"action":"Switched from the GL floor plan to the {3D} view, then repeatedly zoomed and panned from a close-up of interior walls and a door to a distant overview of the modeled floor.","intent":"Review the building model in 3D.","app":"Autodesk Revit","details":"The final 3D view showed the overall floor layout in pink wall geometry."},{"start_s":12070.111,"end_s":12090.111,"action":"Remained inactive while viewing the Revit 3D building model.","intent":"Maintain the current model view.","app":"Autodesk Revit","details":null},{"start_s":12090.111,"end_s":12110.111,"action":"Remained idle in Revit while the desktop configuration and network state changed, then resumed.","intent":"Continue the existing Revit session.","app":"Autodesk Revit","details":"System-level Wi-Fi, network, power, input, and memory events were recorded."},{"start_s":12110.111,"end_s":12120.987,"action":"Switched from the 3D view to the GL floor plan, navigated and zoomed the plan, then activated floor boundary creation and selected a floor element.","intent":"Edit or define a floor boundary in the GL floor plan.","app":"Autodesk Revit","details":"The view ended zoomed into bedrooms, toilets, dining, living, and kitchen areas."},{"start_s":12120.987,"end_s":12125.078,"action":"Opened floor Type Properties, selected the existing type name, and entered TOILET in the Name dialog.","intent":"Rename or duplicate the floor type for a toilet floor.","app":"Autodesk Revit","details":"The dialog showed the original type name BEDROOM 2 being replaced with TOILET."},{"start_s":12125.078,"end_s":12144.427,"action":"Confirmed the type-name change, returned to the GL floor plan, zoomed and panned around the toilet and bedroom area, and interacted with the floor boundary geometry; a WhatsApp notification appeared near the end.","intent":"Apply the toilet floor type and adjust or inspect its boundary in the plan.","app":"Autodesk Revit","details":"The floor type displayed as TOILET and the toilet regions were highlighted in the plan."},{"start_s":12144.427,"end_s":12154.894,"action":"Dismissed the notification, continued zooming and panning through the GL floor plan, and selected points around the M.TOILET area while creating or editing a rectangular floor boundary.","intent":"Define the floor boundary for the M.TOILET area.","app":"Autodesk Revit","details":"The status bar indicated entry of the starting point of the rectangle."},{"start_s":12154.894,"end_s":12165.14,"action":"Scrolled and clicked around the floor plan, zooming into and selecting the Toilet-2 floor boundary until its rectangular outline was active.","intent":"Inspect or edit the Toilet-2 floor boundary.","app":"Autodesk Revit","details":"Floor Plan: GL; Toilet-2 is shown at 8'6\" x 5'0\"."},{"start_s":12165.14,"end_s":12180.379,"action":"Scrolled and navigated across the floor plan, moving from Toilet-2 toward the adjacent bedrooms and Toilet-1 while keeping the boundary-edit mode active.","intent":"Review nearby floor-plan geometry and locate another area for boundary work.","app":"Autodesk Revit","details":"Views include Bedroom-1, Bedroom-2, Pooja, Dining, Toilet-1, and Toilet-2."},{"start_s":12180.379,"end_s":12190.46,"action":"Scrolled and zoomed around the upper bedroom area, then selected and framed the Toilet-1 boundary before navigating out to a wider lobby view.","intent":"Inspect or edit the Toilet-1 floor boundary.","app":"Autodesk Revit","details":"Toilet-1 is shown at 6'0\" x 7'6\"; the view ends on a wider plan around the lobby and stair."},{"start_s":12190.46,"end_s":12200.3,"action":"Navigated and zoomed across the plan, selecting the master toilet area and displaying its rectangular boundary beside the master bedroom and kitchen.","intent":"Inspect or edit the master toilet floor boundary.","app":"Autodesk Revit","details":"Master toilet is labeled 5'6\" x 8'6\"."},{"start_s":12200.3,"end_s":12210.266,"action":"Scrolled and zoomed into a different three-bedroom plan, selected the paired Toilet-1 and Toilet-2 regions, and then navigated to the master-toilet area.","intent":"Review toilet floor boundaries across another plan layout.","app":"Autodesk Revit","details":"The plan view shows Toilet-1 at 5'0\" x 8'2\", Toilet-2 at 6'0\" x 8'2\", and later a master toilet at 9'4\" x 5'6\"."},{"start_s":12210.266,"end_s":12220.772,"action":"Navigated across the plan and zoomed into the lower Toilet-2 room, leaving its rectangular floor boundary selected and clearly framed.","intent":"Inspect or edit the lower Toilet-2 floor boundary.","app":"Autodesk Revit","details":"Selected Toilet-2 is labeled 9'0\" x 6'0\" beside Dining and Bedroom-2."},{"start_s":12220.772,"end_s":12231.626,"action":"Navigated and zoomed around the floor plan while creating or adjusting a rectangular floor boundary, moving from TOILET-2 to TOILET-1.","intent":"Define or inspect a floor boundary around bathroom areas.","app":"Autodesk Revit","details":"Floor Boundary edit mode remained active."},{"start_s":12231.626,"end_s":12241.408,"action":"Zoomed out to review the overall apartment plan, then zoomed into and adjusted the rectangular boundary around TOILET-1.","intent":"Position and refine the floor boundary in the plan.","app":"Autodesk Revit","details":"The view ended focused on a selected TOILET-1 boundary."},{"start_s":12241.408,"end_s":12251.184,"action":"Panned and zoomed across the plan, selecting and adjusting boundary geometry around M.TOILET and then TOILET-2 near BED ROOM-2.","intent":"Continue placing or refining floor-boundary segments across bathroom rooms.","app":"Autodesk Revit","details":"Boundary editing continued across multiple bathroom areas."},{"start_s":12251.184,"end_s":12260.485,"action":"Selected and adjusted the TOILET-2 boundary, then zoomed out to review the surrounding floor plan; pressed Escape and resized or repositioned the Revit window near the end.","intent":"Review the edited boundary and exit or reset the active editing interaction.","app":"Autodesk Revit","details":"The view ended zoomed out with Create Floor Boundary still visible."},{"start_s":12260.485,"end_s":12269.89,"action":"Panned and zoomed across the floor plan, inspecting selected boundaries around M.TOILET and TOILET-1, then zoomed out to a broader apartment view.","intent":"Review floor-boundary placement across the apartment.","app":"Autodesk Revit","details":"The application briefly hid and reappeared while the window was moved."},{"start_s":12269.89,"end_s":12280.176,"action":"Zoomed into a bathroom area and adjusted or inspected the rectangular boundary around TOILET-1, ending with the room boundary selected in close view.","intent":"Refine the TOILET-1 floor boundary geometry.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":12280.176,"end_s":12290.734,"action":"Scrolled and clicked repeatedly in the Revit floor plan while working in Create Floor Boundary mode; adjusted the view around the toilet rooms and began defining a rectangular boundary.","intent":"Edit or define a floor boundary around the toilet area.","app":"Autodesk Revit","details":"Floor Plan: GL shows Toilet-1 and Toilet-2 highlighted with the rectangle tool active."},{"start_s":12290.734,"end_s":12309.536,"action":"Continued navigating and clicking in the floor plan, then dismissed transient states and resized or moved the Revit window; ended with the raster floor-plan image selected and zoomed out to the overall layout.","intent":"Inspect or adjust the floor-plan and raster underlay while editing the model.","app":"Autodesk Revit","details":"The view transitions from a close toilet-area plan to the overall raster floor plan, with Raster Images selected."},{"start_s":12309.536,"end_s":12325.088,"action":"Switched back to the Revit floor-plan window, dismissed transient selections, scrolled through the plan, and clicked the raster underlay; ended with the raster image selected over the floor plan.","intent":"Navigate and inspect the floor plan and its raster underlay.","app":"Autodesk Revit","details":"The plan briefly shows a selected floor in the toilet area, then the overall raster image with its boundary and alignment guides."},{"start_s":12325.088,"end_s":12334.016,"action":"Navigated from the raster floor plan into the 3D view, then scrolled repeatedly to zoom and reposition the building model.","intent":"Inspect the building model in three dimensions.","app":"Autodesk Revit","details":"The 3D view displays the pink wall layout of the building, ending at a closer view."},{"start_s":12334.016,"end_s":12346.363,"action":"Continued zooming and navigating the Revit 3D view with middle-click and scroll gestures, bringing the wall layout into a closer inspection view.","intent":"Examine the building walls and room arrangement in 3D.","app":"Autodesk Revit","details":"The 3D model changes from a broad axonometric view to a close-up of walls, doors, and windows."},{"start_s":12346.363,"end_s":12353.883,"action":"Switched through Windows Explorer to the recorder window, then scrolled to zoom the 3D model out slightly.","intent":"Continue viewing the Revit 3D model after switching windows.","app":"Screen recorder","details":"The visible content remains the Revit 3D view, ending with a smaller centered model."},{"start_s":12353.883,"end_s":12362.364,"action":"Scrolled repeatedly in the Revit 3D view, zooming in on the building’s interior wall, door, and window layout.","intent":"Inspect the 3D building model at a closer scale.","app":"Autodesk Revit","details":null},{"start_s":12362.364,"end_s":12372.233,"action":"Scrolled and middle-clicked in the 3D view, further zooming and repositioning over the modeled rooms and corridor.","intent":"Navigate the 3D model for closer inspection.","app":"Autodesk Revit","details":null},{"start_s":12372.233,"end_s":12383.961,"action":"Middle-clicked to navigate the 3D view, then switched to the GL floor plan and selected the raster underlay image.","intent":"Move from 3D inspection to the GL floor-plan view.","app":"Autodesk Revit","details":"The view changed from the 3D model to Floor Plan: GL."},{"start_s":12383.961,"end_s":12394.195,"action":"Activated the GL floor plan, selected the raster image underlay, and zoomed or panned across the apartment layout.","intent":"Inspect and position the floor-plan raster underlay.","app":"Autodesk Revit","details":"The raster image remained selected while the plan view was repositioned."},{"start_s":12394.195,"end_s":12404.579,"action":"Zoomed and panned around the GL floor plan, then entered floor boundary creation mode and continued navigating near the kitchen and utility area.","intent":"Prepare or trace a floor boundary on the floor plan.","app":"Autodesk Revit","details":"The contextual Modify | Create Floor Boundary tools were visible."},{"start_s":12404.579,"end_s":12416.209,"action":"Opened Type Properties for the TOILET floor type, initiated Rename, and replaced the name text by typing \"WIDE UTILITY\" into the name field.","intent":"Rename the floor type for the utility-area floor.","app":"Autodesk Revit","details":"The Rename dialog remained open with the new name being entered."},{"start_s":12416.209,"end_s":12427.343,"action":"Closed the Type Properties dialog, returned to the GL floor plan, and navigated the view with clicks, dragging, and scrolling while boundary editing remained active.","intent":"Continue editing or reviewing the floor boundary in the GL floor plan.","app":"Autodesk Revit","details":"The Type Properties dialog showed the WIDE UTILITY floor type before closing."},{"start_s":12427.343,"end_s":12437.431,"action":"Navigated across the GL floor plan with middle-button panning, clicks, and repeated scrolling, moving from a broad building view toward individual apartment areas.","intent":"Inspect the floor plan and locate the relevant utility area.","app":"Autodesk Revit","details":"The WIDE UTILITY floor remained selected during navigation."},{"start_s":12437.431,"end_s":12445.941,"action":"Zoomed and panned around the GL floor plan, moving between apartment layouts and central corridors while continuing the active boundary-editing context.","intent":"Review floor-plan geometry and position the view for boundary work.","app":"Autodesk Revit","details":"No confirmed geometry change is visible; navigation dominates the span."},{"start_s":12445.941,"end_s":12456.069,"action":"Zoomed into the kitchen, utility, lobby, and corridor area, then clicked and began positioning a rectangular boundary or related sketch element.","intent":"Define or adjust the WIDE UTILITY floor boundary in the detailed plan view.","app":"Autodesk Revit","details":"The view ended with the utility room and adjacent lobby visible and the status prompt indicating a starting point for a rectangle."},{"start_s":12456.069,"end_s":12466.377,"action":"Navigated back to a wider GL floor-plan view, clicking and dragging around the utility-area geometry while continuing to adjust the active boundary or rectangle placement.","intent":"Continue positioning the floor boundary and review its placement in context.","app":"Autodesk Revit","details":"The WIDE UTILITY region was highlighted with magenta boundary lines in the close view."},{"start_s":12466.377,"end_s":12486.377,"action":"Selected the raster image in the GL floor plan, causing the Modify | Raster Images tools and image properties to appear; then left the image selected without further visible edits.","intent":"Inspect or select the raster underlay image in the floor plan.","app":"Autodesk Revit","details":"The selected raster image was a Block-A-First-Floor-Plan JPEG with locked properties and visible diagonal selection guides."},{"start_s":12486.377,"end_s":12492.906,"action":"Resized the Autodesk Revit window while viewing the GL floor plan with a raster image overlay.","intent":"Adjust the Revit workspace view.","app":"Autodesk Revit","details":"The GL floor plan and raster image remained visible."},{"start_s":12492.906,"end_s":12503.232,"action":"Scrolled and adjusted the floor plan view, then clicked a floor region to select it.","intent":"Navigate to and select a floor element in the GL plan.","app":"Autodesk Revit","details":"A floor element became selected and the Properties palette identified it as WIDE UTILITY."},{"start_s":12503.232,"end_s":12520.774,"action":"Entered 150MM in the selected floor's property field, navigated around the GL floor plan with middle-clicks and scrolling, and opened the floor creation/type controls.","intent":"Modify the selected floor parameter and inspect the floor plan for further editing.","app":"Autodesk Revit","details":"The view changed across apartment and lobby areas; the Floor menu was opened near the end of the span."},{"start_s":12520.774,"end_s":12528.063,"action":"Opened floor Type Properties, chose Rename, and entered the new type name WIDE BALACONY.","intent":"Rename the selected floor type.","app":"Autodesk Revit","details":"The Name dialog showed WIDE BALACONY entered, with the Type Properties dialog still open."},{"start_s":12528.063,"end_s":12537.543,"action":"Confirmed the renamed floor type, navigated to the balcony area, and activated floor boundary editing while zooming into the plan.","intent":"Edit the boundary of the renamed balcony floor.","app":"Autodesk Revit","details":"The selected floor type displayed as WIDE BALACONY and the status bar indicated Pick walls to create lines."},{"start_s":12537.543,"end_s":12549.56,"action":"Selected and adjusted balcony boundary geometry while zooming and panning around the balcony, then pressed Escape to exit intermediate commands.","intent":"Refine the WIDE BALACONY floor boundary.","app":"Autodesk Revit","details":"Magenta boundary lines highlighted the balcony perimeter, including its rounded outer corner."},{"start_s":12549.56,"end_s":12560.092,"action":"Adjusted the active floor boundary around the balcony corner, zoomed or scrolled the plan view, and briefly pressed Escape while navigating the sketch.","intent":"Refine the balcony floor boundary sketch.","app":"Autodesk Revit","details":"Floor WIDE BALCONY remains in Modify | Create Floor Boundary mode."},{"start_s":12560.092,"end_s":12571.918,"action":"Selected the boundary near the rounded balcony edge and navigated by repeated scrolling, leaving the view repositioned toward the adjacent upper portion of the plan.","intent":"Inspect and position the floor boundary sketch for further editing.","app":"Autodesk Revit","details":"The sketch boundary remains visible around the 5' 6\" wide balcony."},{"start_s":12571.918,"end_s":12580.059,"action":"Zoomed out to the apartment plan, then zoomed back toward the balcony and initiated a rectangle-style boundary operation near its upper-left area.","intent":"Continue editing the balcony floor boundary geometry.","app":"Autodesk Revit","details":"The status bar indicates entry of a starting point for a rectangle."},{"start_s":12580.059,"end_s":12591.114,"action":"Selected the upper-left balcony corner, navigated the close-up view, and placed boundary points around the rounded corner while the sketch remained active.","intent":"Shape the floor boundary around the balcony corner.","app":"Autodesk Revit","details":"A magenta sketch outline and temporary arc/geometry guides are visible."},{"start_s":12591.114,"end_s":12600.752,"action":"Scrolled and clicked along the close-up rounded edge, then pressed Escape and typed “TR” to invoke a trim-related command while editing the sketch.","intent":"Trim or adjust intersecting floor boundary lines at the curved corner.","app":"Autodesk Revit","details":"The status bar shows a trim/extend operation prompt near the end of the span."},{"start_s":12600.752,"end_s":12614.245,"action":"Clicked successive points along the rounded corner to modify the sketch geometry, then paused and scrolled the view slightly.","intent":"Finalize the curved balcony boundary segment.","app":"Autodesk Revit","details":"The curved boundary remains highlighted in the active floor sketch."},{"start_s":12614.245,"end_s":12624.281,"action":"Adjusted the Revit floor-boundary view by panning and zooming around the dining, drawing, kitchen, and balcony areas, then repositioned the window and continued navigating the sketch.","intent":"Inspect and position the floor boundary for editing.","app":"Autodesk Revit","details":"Floor WIDE BALCONY remained in Modify | Create Floor Boundary mode."},{"start_s":12624.281,"end_s":12632.951,"action":"Zoomed into the rounded corner of the wide balcony, selected the boundary region, and began placing or adjusting a rectangular sketch element while dimensions appeared.","intent":"Edit the balcony floor-boundary geometry.","app":"Autodesk Revit","details":"The sketch showed magenta boundary lines and temporary dimensions near the balcony corner."},{"start_s":12632.951,"end_s":12643.279,"action":"Canceled an intermediate sketch command, entered a trim-related command, and clicked several boundary segments around the rounded balcony corner to refine the outline.","intent":"Refine and trim the balcony boundary sketch.","app":"Autodesk Revit","details":"The rounded corner and adjacent straight boundary segments remained highlighted for editing."},{"start_s":12643.279,"end_s":12652.764,"action":"Selected and manipulated the balcony boundary corner with repeated clicks and drags, canceled transient commands, then zoomed out to review the broader floor plan.","intent":"Adjust the corner geometry and review the floor-boundary sketch.","app":"Autodesk Revit","details":"The view transitioned from a close-up rounded corner to a multi-unit floor-plan overview."},{"start_s":12652.764,"end_s":12662.731,"action":"Navigated to another balcony area, zoomed and panned to a balcony labeled 5' 6\" WIDE BALCONY, and selected its surrounding boundary and wall segments.","intent":"Inspect and prepare another balcony boundary for editing.","app":"Autodesk Revit","details":"The selected balcony outline was shown in magenta with temporary dimension markers."},{"start_s":12662.731,"end_s":12671.916,"action":"Resized and repositioned the Revit window, zoomed into the 5' 6\" wide balcony corner, and clicked boundary points to begin another sketch adjustment.","intent":"Continue editing the balcony floor-boundary geometry.","app":"Autodesk Revit","details":"The close-up showed the rounded outer corner and a blue-highlighted sketch segment."},{"start_s":12671.916,"end_s":12682.385,"action":"Entered floor-boundary sketch mode and placed an arc segment along the upper-left rounded balcony corner, leaving the new sketch geometry selected.","intent":"Extend the floor boundary around the balcony corner.","app":"Autodesk Revit","details":"Floor plan GL; floor type WIDE BALCONY."},{"start_s":12682.385,"end_s":12691.682,"action":"Adjusted the curved boundary segment with a drag, then continued the sketch by placing a connected line/arc along the rounded upper edge; the boundary updated in magenta.","intent":"Refine and continue the balcony floor boundary.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":12691.682,"end_s":12701.502,"action":"Zoomed and panned across the floor plan, then selected boundary geometry around the balcony and adjacent wall, leaving the sketch focused on the balcony outline.","intent":"Review and position the view for further boundary editing.","app":"Autodesk Revit","details":"The 5' 6\" WIDE BALCONY outline was visible."},{"start_s":12701.502,"end_s":12711.422,"action":"Selected and adjusted the balcony boundary near its right side, then clicked to begin another arc or boundary segment; the magenta outline remained visible around the balcony and adjacent projection.","intent":"Continue editing the floor boundary at the right side.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":12711.422,"end_s":12720.898,"action":"Scrolled and zoomed toward the upper-right rounded balcony corner, inspecting the endpoint and curved wall alignment while keeping the sketch active.","intent":"Inspect the boundary endpoint and corner alignment.","app":"Autodesk Revit","details":"No confirmed geometry change was visible during the zooming."},{"start_s":12720.898,"end_s":12731.152,"action":"Selected the right-side boundary endpoint, placed or adjusted a connected vertical sketch line, and then selected the resulting segment for trimming or extension; the right edge of the balcony outline remained highlighted.","intent":"Complete and refine the right-side floor-boundary segment.","app":"Autodesk Revit","details":"The sketch showed a selected cyan segment before returning to the magenta boundary."},{"start_s":12731.152,"end_s":12741.078,"action":"Clicked and navigated within the Floor Boundary edit view, zooming from the floor plan overview into the dining area and wide balcony corner.","intent":"Inspect the floor boundary around the balcony.","app":"Autodesk Revit","details":"The GL floor plan remained in Modify | Create Floor Boundary mode."},{"start_s":12741.078,"end_s":12751.238,"action":"Zoomed further into the wide balcony, selected boundary geometry, and positioned the view on the rounded lower-right corner for editing.","intent":"Prepare the curved balcony boundary for adjustment.","app":"Autodesk Revit","details":"The balcony perimeter was highlighted in magenta while editing remained active."},{"start_s":12751.238,"end_s":12760.816,"action":"Scrolled and zoomed tightly into the rounded balcony corner, then canceled intermediate selections while keeping the boundary visible at high magnification.","intent":"Examine the corner geometry closely.","app":"Autodesk Revit","details":"The curved magenta boundary and adjacent wall lines filled the view."},{"start_s":12760.816,"end_s":12771.652,"action":"Clicked boundary segments and used the trim/extend interaction around the right side of the balcony corner, with Escape presses to cancel or reset selections.","intent":"Refine the balcony boundary alignment at the corner.","app":"Autodesk Revit","details":"A boundary segment and nearby geometry were alternately highlighted during editing."},{"start_s":12771.652,"end_s":12781.488,"action":"Continued selecting and adjusting the curved balcony boundary, zoomed and panned around the corner, and left a short cyan-highlighted segment selected.","intent":"Continue refining the curved floor boundary.","app":"Autodesk Revit","details":"The floor boundary remained in sketch-edit mode with the rounded corner visible."},{"start_s":12781.488,"end_s":12796.545,"action":"Dragged the boundary corner through a prolonged edit, exited the active selection, entered 150MM in the Height Offset From Level field, and confirmed it before returning to a wider floor-plan view.","intent":"Apply a 150MM height offset and review the updated floor plan.","app":"Autodesk Revit","details":"The GL plan zoomed out to show both units after the offset entry."},{"start_s":12796.545,"end_s":12806.598,"action":"Dismissed the floor-overlap warning, exited the warning state, and zoomed or panned around the GL floor plan while the floor remained selected.","intent":"Review the floor plan and clear the overlap warning.","app":"Autodesk Revit","details":"Warning stated that highlighted floors overlap."},{"start_s":12806.598,"end_s":12817.087,"action":"Entered floor boundary creation mode, adjusted the view with zooming and panning, and opened the floor type properties.","intent":"Edit the selected floor boundary and inspect its type settings.","app":"Autodesk Revit","details":"Boundary Line mode was active for the WIDE BALCONY floor."},{"start_s":12817.087,"end_s":12825.838,"action":"Opened the type rename dialog, replaced the type name with “POOJA ROOM,” and returned to Type Properties showing the renamed floor type.","intent":"Create or rename a floor type for the pooja room.","app":"Autodesk Revit","details":"The type changed from WIDE BALCONY to POOJA ROOM."},{"start_s":12825.838,"end_s":12836.322,"action":"Returned to the floor plan, zoomed into the selected POOJA ROOM area, and adjusted the boundary view around the small room.","intent":"Position and refine the new floor boundary in the plan.","app":"Autodesk Revit","details":"The view showed the POOJA room labeled 6' 0\" x 3' 8\"."},{"start_s":12836.322,"end_s":12846.374,"action":"Continued editing the POOJA ROOM boundary, zoomed and panned across the plan, and changed the visible room geometry to a 5' 0\" x 3' 5\" configuration.","intent":"Resize or align the pooja-room floor boundary.","app":"Autodesk Revit","details":"Boundary Line mode remained active."},{"start_s":12846.374,"end_s":12857.22,"action":"Zoomed and panned to another plan area, placed or adjusted a rectangle corner for the POOJA ROOM boundary, and left the view showing the broader floor plan.","intent":"Continue placing the pooja-room floor boundary.","app":"Autodesk Revit","details":"The status prompts indicated entering rectangle points."},{"start_s":12857.22,"end_s":12867.341,"action":"Zoomed and panned around the GL floor plan while working in Create Floor Boundary mode, then selected a boundary segment near the POOJA room.","intent":"Inspect and adjust the floor boundary geometry.","app":"Autodesk Revit","details":"Floor Plan: GL; selected boundary line visible near POOJA."},{"start_s":12867.341,"end_s":12875.958,"action":"Zoomed and panned across the apartment floor plan, moving from a close view of the POOJA area to a wider view of multiple units and selecting boundary geometry.","intent":"Review floor boundary placement across the plan.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active."},{"start_s":12875.958,"end_s":12885.92,"action":"Navigated around the floor plan, briefly selected the floor, then zoomed into the drawing, dining, and kitchen area before switching back to general floor-plan tools.","intent":"Inspect the floor element and surrounding room layout.","app":"Autodesk Revit","details":"Floor element properties and room labels were visible."},{"start_s":12885.92,"end_s":12900.07,"action":"Panned and zoomed through several apartment layouts, selected floor-plan geometry, and opened the floor type properties interface.","intent":"Review the plan and access floor type settings.","app":"Autodesk Revit","details":"Transitioned to the Type Properties window."},{"start_s":12900.07,"end_s":12906.38,"action":"Opened the floor type rename dialog and replaced the existing type name with KITCHEN.","intent":"Rename the floor type to identify the kitchen finish or floor type.","app":"Autodesk Revit","details":"Rename dialog showed KITCHEN entered; confirmation had not yet been completed."},{"start_s":12906.38,"end_s":12914.759,"action":"Confirmed the renamed floor type and returned to Type Properties, where the type field displayed KITCHEN; then clicked the OK button.","intent":"Apply the new floor type name and close the properties dialog.","app":"Autodesk Revit","details":"Type Properties showed System Family: Floor and Type: KITCHEN."},{"start_s":12914.759,"end_s":12924.74,"action":"Navigated and zoomed around the GL floor plan while remaining in Create Floor Boundary mode, moving from a close kitchen view to a wider apartment view.","intent":"Inspect and position the floor plan for boundary editing.","app":"Autodesk Revit","details":"The view remained on the GL floor plan with kitchen and adjacent rooms visible."},{"start_s":12924.74,"end_s":12935.087,"action":"Zoomed and panned across the dining and kitchen areas, then began positioning a rectangular floor-boundary segment; magenta boundary lines and a temporary dimension appeared.","intent":"Define or adjust the floor boundary around the dining and kitchen layout.","app":"Autodesk Revit","details":"The status bar indicated entry of the starting point of a rectangle."},{"start_s":12935.087,"end_s":12944.899,"action":"Panned and zoomed across several apartment layouts while extending or reviewing selected floor-boundary geometry; magenta lines and temporary dimensions remained visible.","intent":"Continue laying out and checking the floor boundary across the plan.","app":"Autodesk Revit","details":"The view ended on a wider multi-unit floor plan with boundary geometry selected."},{"start_s":12944.899,"end_s":12955.028,"action":"Zoomed and panned through the building plan, pressed Escape to cancel or exit an intermediate operation, then dragged boundary geometry and continued navigating the floor plan.","intent":"Refine the floor-boundary sketch and inspect its placement across the building.","app":"Autodesk Revit","details":"The Properties panel showed sketch data including slope and length; Create Floor Boundary mode remained active."},{"start_s":12955.028,"end_s":12965.138,"action":"Pressed Escape, zoomed out to show multiple apartment units and the floor schedule, then dragged and adjusted the selected floor-boundary sketch while panning around the overall plan.","intent":"Review and reposition the floor-boundary sketch at the building scale.","app":"Autodesk Revit","details":"The sketch remained selected with magenta highlights and the floor plan was shown at progressively wider scales."},{"start_s":12965.138,"end_s":12983.697,"action":"Zoomed and panned through the building plan, opened and adjusted the floor-boundary sketch around a kitchen and adjacent lift area, then continued reviewing the multi-unit layout in Create Floor Boundary mode.","intent":"Continue editing and verifying the floor boundary around the selected apartment and wider plan.","app":"Autodesk Revit","details":"Magenta boundary geometry and temporary dimensions were visible around the kitchen; the final view showed the central lobby and surrounding apartments."},{"start_s":12983.697,"end_s":13003.697,"action":"Dismissed two Revit warning prompts and returned to the GL floor plan view.","intent":"Clear warnings and resume work in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":13003.697,"end_s":13014.573,"action":"Navigated the GL floor plan by middle-clicking and scrolling to zoom and pan toward the apartment and lobby area.","intent":"Inspect a specific portion of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":13014.573,"end_s":13024.788,"action":"Continued panning and zooming the floor plan, then selected a floor boundary to enter Create Floor Boundary mode.","intent":"Edit the selected floor boundary.","app":"Autodesk Revit","details":"Create Floor Boundary mode became active."},{"start_s":13024.788,"end_s":13034.959,"action":"Panned and zoomed around the plan while remaining in Create Floor Boundary mode, positioning the view over another apartment area.","intent":"Prepare the floor boundary edit view.","app":"Autodesk Revit","details":"The boundary sketch remained active; no completed boundary was visible."},{"start_s":13034.959,"end_s":13046.336,"action":"Opened floor Type Properties, chose Rename, and entered \"LIVING AREA\" in the name dialog.","intent":"Rename the floor type from KITCHEN to LIVING AREA.","app":"Autodesk Revit","details":"The rename dialog remained open with LIVING AREA entered."},{"start_s":13046.336,"end_s":13056.014,"action":"Confirmed the renamed floor type, returned to the floor plan, and zoomed into the living room while beginning a rectangular boundary operation.","intent":"Continue editing the renamed floor boundary.","app":"Autodesk Revit","details":"The floor type displayed as LIVING AREA and the boundary tool prompted for the rectangle's starting point."},{"start_s":13056.014,"end_s":13066.026,"action":"Navigated and zoomed the Revit floor plan, then began defining a floor boundary around the living area; the view ended on a close-up of the selected living-room rectangle.","intent":"Define or edit the living-area floor boundary.","app":"Autodesk Revit","details":"Floor Plan: GL; Create Floor Boundary mode was active."},{"start_s":13066.026,"end_s":13078.408,"action":"Continued adjusting the floor-boundary sketch by panning and zooming around the living room, then selected or placed another point near the lower-right edge of the rectangular boundary.","intent":"Refine the living-area floor boundary geometry.","app":"Autodesk Revit","details":"The living room remained enclosed by a magenta rectangular boundary and showed dimensions of approximately 11' 0\" x 12' 2\"."},{"start_s":13078.408,"end_s":13086.181,"action":"Panned and zoomed across the floor plan while continuing boundary-related selections, then exited or completed the sketch; Revit displayed the broader plan before switching to a warning window.","intent":"Finish or leave the floor-boundary editing operation.","app":"Autodesk Revit","details":"The span ended with an Autodesk Revit warning window transition."},{"start_s":13086.181,"end_s":13101.659,"action":"Dismissed the Revit warning, switched briefly to the 3D view, navigated the model, then returned to the GL floor plan and selected the raster image underlay.","intent":"Inspect the model in 3D and return to manage the floor-plan underlay.","app":"Autodesk Revit","details":"The 3D view showed brick exterior walls and windows; the floor plan later displayed the raster image selected."},{"start_s":13101.659,"end_s":13113.141,"action":"Returned to the GL floor plan, adjusted the selected raster image and zoomed or panned across the furnished apartment layout, then invoked a save or related command that temporarily hid the application.","intent":"Adjust or review the raster underlay alignment on the floor plan.","app":"Autodesk Revit","details":"Raster Images properties showed the image on the Foreground draw layer."},{"start_s":13113.141,"end_s":13120.995,"action":"Switched to the recorder window, then scrolled and navigated within the displayed floor-plan image, ending on a closer view of the lobby, dining, drawing, bedroom, and living areas.","intent":"Review the floor-plan image.","app":"Screen recorder","details":"The viewer displayed the furnished first-floor plan image."},{"start_s":13120.995,"end_s":13139.325,"action":"Switched to Autodesk Revit, navigated the GL floor plan with zoom and pan gestures, and opened the floor type properties while entering floor-boundary editing mode.","intent":"Prepare the selected floor type for editing.","app":"Autodesk Revit","details":"The GL floor plan and selected raster image were visible before the Type Properties dialog opened."},{"start_s":13139.325,"end_s":13145.927,"action":"Opened the type name editor and replaced the existing floor type name with “DRESS FLOORING,” then confirmed the entry.","intent":"Rename the floor type.","app":"Autodesk Revit","details":"The Type Properties dialog showed System Family: Floor and the type name editor."},{"start_s":13145.927,"end_s":13156.649,"action":"Returned to the GL floor plan with DRESS FLOORING selected, navigated to the lower portion of the plan, and positioned the view for boundary drawing.","intent":"Locate the area where the floor boundary will be created.","app":"Autodesk Revit","details":"Revit remained in Modify | Create Floor Boundary mode."},{"start_s":13156.649,"end_s":13168.646,"action":"Zoomed and panned into a small room labeled DRESS beside the dining and drawing areas, keeping the rectangle boundary tool active.","intent":"Precisely frame the target room for floor-boundary creation.","app":"Autodesk Revit","details":"The DRESS room and surrounding walls became clearly visible."},{"start_s":13168.646,"end_s":13180.691,"action":"Panned and zoomed around the plan, then focused tightly on the DRESS room and its existing magenta boundary while continuing boundary editing.","intent":"Inspect and refine the boundary location.","app":"Autodesk Revit","details":"The DRESS room was shown with an 8' 0\" x 4' 8\" label and highlighted boundary edges."},{"start_s":13180.691,"end_s":13190.654,"action":"Navigated within the floor plan and dragged across the DRESS room area while in Create Floor Boundary mode, leaving the room boundary highlighted.","intent":"Draw or adjust the floor boundary around the DRESS room.","app":"Autodesk Revit","details":"The final view showed the DRESS room enclosed by a magenta rectangular boundary."},{"start_s":13190.654,"end_s":13201.243,"action":"Navigated around the GL floor plan using repeated middle-clicks and scroll gestures, shifting the view across furnished apartment layouts while remaining in floor-boundary mode.","intent":"Review and reposition the floor-plan view before continuing boundary work.","app":"Autodesk Revit","details":"The GL plan remained visible and the Create Floor Boundary context was active."},{"start_s":13201.243,"end_s":13211.731,"action":"Scrolled and repositioned the GL floor plan, then clicked around the right-side apartment and corridor; red temporary boundary or alignment markers appeared near the dress area.","intent":"Inspect and work on floor-boundary geometry in the selected apartment area.","app":"Autodesk Revit","details":"Floor Boundary mode remained active with chain and offset controls visible."},{"start_s":13211.731,"end_s":13221.815,"action":"Zoomed and panned across the GL plan from a dining-room close-up to the central lobby and lower-right apartment, clicking wall and boundary locations; temporary extension and alignment indicators appeared.","intent":"Continue placing or checking floor-boundary segments against surrounding walls.","app":"Autodesk Revit","details":"The view ended near the lower-right apartment with a temporary boundary extension marker."},{"start_s":13221.815,"end_s":13237.107,"action":"Exited or switched out of the active boundary-edit context, adjusted the Revit window, scrolled the plan, and clicked several wall locations before returning to floor-boundary mode.","intent":"Reposition the model and resume floor-boundary editing.","app":"Autodesk Revit","details":"The interface alternated between standard modeling tools and Modify | Create Floor Boundary; the span ended during an app switch to Type Properties."},{"start_s":13237.107,"end_s":13246.556,"action":"Opened the floor Type Properties naming dialog and replaced the existing type name by typing a new name beginning with “DRAWING FLOORING,” leaving the dialog open.","intent":"Rename or duplicate the floor finish type for the drawing flooring.","app":"Autodesk Revit","details":"The Type Properties dialog showed System Family: Floor and the Name field was being edited."},{"start_s":13246.556,"end_s":13266.556,"action":"Reviewed the Type Properties dialog after the rename, with the floor type shown as DRAWING FLOORING and its construction, graphics, material, and analytical parameters visible.","intent":"Verify the renamed floor type and its properties.","app":"Autodesk Revit","details":"No further interaction was recorded; the Type Properties dialog remained open."},{"start_s":13266.556,"end_s":13277.383,"action":"Activated the floor boundary tool in the GL floor plan, zoomed into the drawing and dining rooms, and began positioning a rectangular boundary segment.","intent":"Create or edit a floor boundary around the selected room area.","app":"Autodesk Revit","details":"GL floor plan remained in Modify | Create Floor Boundary mode."},{"start_s":13277.383,"end_s":13287.404,"action":"Canceled the active boundary input, zoomed and panned across the floor plan, and selected or inspected wall geometry near the drawing and dining rooms.","intent":"Navigate the plan and adjust the boundary-editing view.","app":"Autodesk Revit","details":"The view shifted from a close-up of the drawing room to a wider floor-plan view."},{"start_s":13287.404,"end_s":13297.418,"action":"Panned and zoomed through the central lobby and lower drawing-room areas, clicked wall and boundary locations, and dragged geometry while the floor boundary remained active.","intent":"Trace or refine floor-boundary geometry around the lower rooms.","app":"Autodesk Revit","details":"A drawing room near the lobby became selected with visible temporary boundary dimensions and grips."},{"start_s":13297.418,"end_s":13307.505,"action":"Navigated to another drawing room, selected its boundary area, and zoomed and panned around the lobby and adjacent rooms.","intent":"Continue reviewing or editing floor boundary segments in other rooms.","app":"Autodesk Revit","details":"The view moved from the lower drawing room to a drawing room labeled 12' 0\" x 15' 6\" near lobby markers 5 and 6."},{"start_s":13307.505,"end_s":13317.887,"action":"Zoomed and panned across the upper rooms, then selected the drawing-room boundary beside the dining room and started another diagonal boundary point.","intent":"Trace the boundary of the selected drawing room.","app":"Autodesk Revit","details":"The selected room was labeled DRAWING 13' 10\" x 11' 0\"; the status bar prompted for the rectangle's diagonal point."},{"start_s":13317.887,"end_s":13329.209,"action":"Canceled the pending input, zoomed and panned around the selected drawing and dining rooms, and then zoomed out to review the broader floor plan.","intent":"Review the completed or in-progress floor boundary across the floor plan.","app":"Autodesk Revit","details":"The drawing room boundary remained highlighted in magenta before the final zoomed-out overview."},{"start_s":13329.209,"end_s":13339.781,"action":"Zoomed and panned around the GL floor plan, then continued drawing or adjusting the floor boundary around the dining and drawing rooms.","intent":"Refine the floor boundary geometry in the selected floor plan.","app":"Autodesk Revit","details":"Floor boundary edit mode remained active."},{"start_s":13339.781,"end_s":13353.291,"action":"Exited the active boundary operation, zoomed and panned across the floor plan, and interacted with the boundary before switching to a Revit warning window.","intent":"Review or modify the floor boundary and resolve the resulting warning.","app":"Autodesk Revit","details":"A Warning window was active at the end of the span."},{"start_s":13353.291,"end_s":13359.407,"action":"Returned to the Revit floor plan, dismissed or passed through the warning, selected a floor, and re-entered floor boundary editing while zooming toward the dining area.","intent":"Continue editing the selected floor boundary.","app":"Autodesk Revit","details":"The floor was highlighted and boundary sketch tools were visible."},{"start_s":13359.407,"end_s":13366.599,"action":"Opened Floor Type Properties, chose Rename, and entered the new type name \"DINING FLOOR\" in the Name dialog.","intent":"Rename the floor type for the dining area.","app":"Autodesk Revit","details":"The Name dialog remained open with the new text being entered."},{"start_s":13366.599,"end_s":13378.222,"action":"Returned to Type Properties with the floor type displayed as \"DINING FLOOR\" and clicked OK to confirm the rename.","intent":"Apply the renamed floor type.","app":"Autodesk Revit","details":"The Type Properties dialog remained visible through most of the span."},{"start_s":13378.222,"end_s":13387.747,"action":"Returned to the GL floor plan, zoomed into the dining area, and selected or adjusted horizontal wall and boundary geometry near the dining-room entrance.","intent":"Continue refining the dining floor boundary and adjacent geometry.","app":"Autodesk Revit","details":"The selected floor type was DINING FLOOR and a 5.000-inch temporary dimension was visible."},{"start_s":13387.747,"end_s":13397.351,"action":"Adjusted the view with scrolling and middle-button panning, then clicked around the dining-room floor boundary while Revit remained in Create Floor Boundary mode.","intent":"Refine or inspect the dining-room floor boundary.","app":"Autodesk Revit","details":"The selected floor boundary remained visible around the dining area, with dimensions displayed."},{"start_s":13397.351,"end_s":13407.106,"action":"Exited the active boundary interaction with Escape, then panned and scrolled around the lower edge of the dining room and clicked near the floor boundary.","intent":"Continue editing or reviewing the floor boundary near the doorway.","app":"Autodesk Revit","details":"The view stayed focused on the dining-room perimeter and adjacent doorway."},{"start_s":13407.106,"end_s":13417.31,"action":"Scrolled and panned outward, clicked boundary points, and zoomed out to review the dining room within the surrounding floor plan.","intent":"Inspect the floor boundary in the broader plan context.","app":"Autodesk Revit","details":"The view progressed from a close-up to a wider plan showing the dining room and neighboring rooms."},{"start_s":13417.31,"end_s":13427.49,"action":"Panned and zoomed around the plan, exited an interaction with Escape, then clicked and dragged along walls and boundary points around the dining room.","intent":"Continue aligning or checking the floor boundary against surrounding walls.","app":"Autodesk Revit","details":"The dining room was shown at a closer scale with its perimeter highlighted and dimensions visible."},{"start_s":13427.49,"end_s":13437.622,"action":"Clicked and dragged along the upper and left edges of the dining room, then selected additional boundary points near the adjacent room and doorway.","intent":"Edit or verify boundary segments along the dining-room perimeter.","app":"Autodesk Revit","details":"A close-up showed the magenta floor boundary and temporary dimensions near the doorway."},{"start_s":13437.622,"end_s":13446.546,"action":"Clicked and panned across the dining-room floor boundary, pressed Escape several times, and scrolled to reposition the view for further review.","intent":"Review the edited boundary and reposition the plan view.","app":"Autodesk Revit","details":"The final view showed the dining room, table layout, highlighted perimeter, and a temporary horizontal dimension."},{"start_s":13446.546,"end_s":13456.877,"action":"Navigated and zoomed around the GL floor plan while editing the dining-floor boundary, then repositioned the Revit window and view.","intent":"Inspect and adjust the floor boundary geometry.","app":"Autodesk Revit","details":"The view moved from a close dining-room plan to a wider floor-plan view."},{"start_s":13456.877,"end_s":13466.706,"action":"Zoomed and panned to another dining area, selected boundary endpoints, and drew or adjusted connected boundary segments around the room perimeter.","intent":"Continue defining the dining-floor boundary.","app":"Autodesk Revit","details":"Revit remained in Modify | Create Floor Boundary mode with chain drawing enabled."},{"start_s":13466.706,"end_s":13476.659,"action":"Panned across the floor plan and placed additional boundary points along walls and openings, then canceled and resized or repositioned the Revit window while continuing the sketch.","intent":"Refine the floor boundary sketch around adjacent rooms.","app":"Autodesk Revit","details":"The sketch displayed dimensional guides and highlighted boundary lines."},{"start_s":13476.659,"end_s":13484.228,"action":"Dragged across the boundary geometry, selected a line, canceled the active operation, typed TR, and clicked wall and boundary segments to invoke trim/extend editing.","intent":"Trim or extend boundary lines to close and clean the floor sketch.","app":"Autodesk Revit","details":"The status bar indicated selecting the first line or wall to trim/extend."},{"start_s":13484.228,"end_s":13493.464,"action":"Clicked opposing boundary and wall segments repeatedly to trim or extend the sketch at the corner and opening.","intent":"Resolve intersections and align the floor boundary corners.","app":"Autodesk Revit","details":"The close-up showed magenta sketch lines meeting dark wall geometry."},{"start_s":13493.464,"end_s":13503.845,"action":"Canceled the current operation, typed TR again, selected boundary segments, and left the Trim/Extend to Corner tool active with its help tooltip displayed.","intent":"Continue corner cleanup of the floor boundary.","app":"Autodesk Revit","details":"The final view showed the Trim/Extend to Corner tooltip and the floor sketch still active."},{"start_s":13503.845,"end_s":13516.414,"action":"Scrolled and middle-clicked near the floor boundary while remaining in Create Floor Boundary mode.","intent":"Continue editing or inspecting the floor boundary.","app":"Autodesk Revit","details":"Floor DINING FLOOR is open on level GL."},{"start_s":13516.414,"end_s":13526.342,"action":"Middle-clicked and repeatedly clicked boundary segments, then used Tab repeatedly to cycle through nearby selectable geometry.","intent":"Select or cycle through boundary and reference elements for floor sketch editing.","app":"Autodesk Revit","details":"The view remained zoomed into the dining-floor perimeter."},{"start_s":13526.342,"end_s":13536.343,"action":"Clicked several wall and boundary locations, moved the window, and used Tab to cycle selections; a horizontal wall/reference segment became highlighted temporarily.","intent":"Inspect and select geometry forming the floor boundary.","app":"Autodesk Revit","details":"The sketch remained active in the GL plan view."},{"start_s":13536.343,"end_s":13547.204,"action":"Clicked and pressed Escape several times while panning or zooming the plan, then selected additional boundary geometry and moved the view to show more of the dining area.","intent":"Adjust the view and manage selections while editing the floor boundary.","app":"Autodesk Revit","details":"The view expanded to show the dining room and adjacent wall edges."},{"start_s":13547.204,"end_s":13557.289,"action":"Clicked a boundary segment and repeatedly pressed Tab to cycle through alternatives, clicked additional geometry, then interacted near the upper-right window area and scrolled.","intent":"Cycle through and inspect selectable elements in the floor-boundary sketch.","app":"Autodesk Revit","details":"The floor sketch remained open with the dining room perimeter visible."},{"start_s":13557.289,"end_s":13564.571,"action":"Clicked boundary points, pressed Escape, scrolled and middle-clicked to navigate, then zoomed out to reveal the complete dining room and surrounding rooms.","intent":"Navigate the plan and review the floor boundary layout.","app":"Autodesk Revit","details":"The final view shows the DINING room labeled 14' 6\" x 11' 0\" within the GL plan."},{"start_s":13564.571,"end_s":13580.465,"action":"Scrolled and clicked around the dining-room floor boundary, then zoomed into the boundary near the sink and dining area while remaining in Create Floor Boundary mode.","intent":"Inspect and adjust the floor sketch boundary.","app":"Autodesk Revit","details":"The view ended zoomed into the dining room with sketch boundary lines visible."},{"start_s":13580.465,"end_s":13590.706,"action":"Dismissed the Revit warning and continued clicking and dragging floor sketch lines around the dining-room perimeter; Revit displayed an overlap warning stating that lines may not form closed loops.","intent":"Resolve overlapping or improperly connected floor-boundary lines.","app":"Autodesk Revit","details":"The warning identified overlapping highlighted lines."},{"start_s":13590.706,"end_s":13600.505,"action":"Scrolled and panned to the upper-right side of the dining room, then selected and dragged boundary geometry near the doorway and adjacent walls.","intent":"Continue editing the floor boundary sketch.","app":"Autodesk Revit","details":"The dining-room boundary remained highlighted in magenta, with a selected edge near the upper-right doorway."},{"start_s":13600.505,"end_s":13610.938,"action":"Added and adjusted sketch segments along the dining-room and doorway edges, then zoomed out to review the floor plan and multiple highlighted dining areas.","intent":"Extend and review the floor boundary layout.","app":"Autodesk Revit","details":"A temporary sketch line showed a 4.76° slope and 17.564' length before the view was zoomed out."},{"start_s":13610.938,"end_s":13620.627,"action":"Zoomed and panned to another dining room, then clicked and dragged boundary points around its right and lower edges while drawing connected sketch lines.","intent":"Trace the floor boundary for the adjacent dining area.","app":"Autodesk Revit","details":"The visible room was labeled DINING 17' 6\" x 12' 6\" and remained in boundary-edit mode."},{"start_s":13620.627,"end_s":13635.696,"action":"Continued placing and adjusting floor-boundary segments around the dining room, panned across the plan, and zoomed out to review the completed highlighted room boundary before moving the view.","intent":"Finalize and inspect the dining-room floor sketch.","app":"Autodesk Revit","details":"The final view showed the highlighted dining room within the broader floor plan; no explicit finish confirmation was visible."},{"start_s":13635.696,"end_s":13646.364,"action":"Dismissed the floor-overlap warning, navigated the GL floor plan by scrolling and panning, and switched to the {3D} view.","intent":"Inspect the model in plan and 3D views.","app":"Autodesk Revit","details":"The GL floor plan showed a highlighted overlapping floor before the 3D view opened."},{"start_s":13646.364,"end_s":13661.94,"action":"Viewed the 3D model and zoomed out by scrolling to show a larger portion of the building layout.","intent":"Review the overall 3D building model.","app":"Autodesk Revit","details":null},{"start_s":13661.94,"end_s":13671.497,"action":"Scrolled and panned across the 3D model, changing the viewpoint and selecting a balcony or wall-related element.","intent":"Inspect model elements from different 3D angles.","app":"Autodesk Revit","details":"A model element was highlighted in blue during navigation."},{"start_s":13671.497,"end_s":13681.531,"action":"Continued panning and zooming through the 3D model, moving from a wider building view to a closer view of rooms, walls, doors, and balconies.","intent":"Examine detailed building geometry.","app":"Autodesk Revit","details":"The view ended on a close-up of the multi-room building interior and exterior walls."},{"start_s":13681.531,"end_s":13701.531,"action":"Remained idle while viewing the close-up 3D model.","intent":"Review the displayed building model.","app":"Autodesk Revit","details":null},{"start_s":13701.531,"end_s":13712.66,"action":"Scrolled and panned closer across the 3D model, then clicked a wall or floor-area element, leaving it highlighted in blue.","intent":"Inspect a specific building element in the 3D view.","app":"Autodesk Revit","details":"The final view focused on interior rooms and corridors with a selected element highlighted."},{"start_s":13712.66,"end_s":13722.687,"action":"Switched from the 3D view to the GL floor plan and zoomed or panned across the apartment layout.","intent":"Navigate and inspect the GL floor plan.","app":"Autodesk Revit","details":null},{"start_s":13722.687,"end_s":13736.24,"action":"Zoomed into the GL floor plan around the stair, lobby, and apartment area, then entered floor-boundary editing and switched to the Type Properties window.","intent":"Edit or inspect the selected floor boundary and its type settings.","app":"Autodesk Revit","details":"The selected floor was shown as DINING FLOOR before the Type Properties window opened."},{"start_s":13736.24,"end_s":13742.065,"action":"Opened the floor type name editor, entered “SHAFT,” confirmed the name change, and returned to Type Properties.","intent":"Rename the floor type to SHAFT.","app":"Autodesk Revit","details":"Type Properties showed System Family: Floor with type SHAFT."},{"start_s":13742.065,"end_s":13752.237,"action":"Returned to floor-boundary editing, zoomed and panned to a shaft area, and began drawing or modifying boundary lines around it.","intent":"Create or adjust the shaft floor boundary.","app":"Autodesk Revit","details":"The view ended zoomed into a shaft-like rectangular area with boundary-edit controls active."},{"start_s":13752.237,"end_s":13761.837,"action":"Continued navigating and editing the floor boundary, panning across the plan and selecting or dragging geometry around shaft locations.","intent":"Refine the shaft boundary geometry across the floor plan.","app":"Autodesk Revit","details":"The SHAFT floor remained selected while the view moved between shaft and apartment areas."},{"start_s":13761.837,"end_s":13771.329,"action":"Drew or positioned another rectangular boundary segment around a small shaft opening, then zoomed or panned back to the apartment plan and canceled the active operation.","intent":"Continue placing shaft boundary geometry and review its position.","app":"Autodesk Revit","details":"The final view showed the apartment plan with the shaft area highlighted near the right side."},{"start_s":13771.329,"end_s":13781.08,"action":"Adjusted the view around a selected floor-boundary region, then canceled the active rectangle command with Escape while the magenta selection remained visible.","intent":"Review and reposition the floor boundary around a shaft area.","app":"Autodesk Revit","details":"Floor plan GL; selected region labeled near a shaft."},{"start_s":13781.08,"end_s":13790.667,"action":"Dragged across the selected floor-boundary geometry to reposition or adjust the view, then zoomed out to show the surrounding floor plan and canceled the active command.","intent":"Inspect the selected floor boundary in the broader plan context.","app":"Autodesk Revit","details":"The selected magenta boundary was shown first close-up and then in a wider floor-plan view."},{"start_s":13790.667,"end_s":13800.71,"action":"Navigated to another area of the floor plan, clicked to begin a rectangular boundary operation, and zoomed in on a narrow shaft-like region while leaving the rectangle command active.","intent":"Create or inspect another floor-boundary rectangle.","app":"Autodesk Revit","details":"The view ended on a narrow vertical region containing shaft annotations and a temporary rectangle operation."},{"start_s":13800.71,"end_s":13811.033,"action":"Canceled the active rectangle operation, panned and zoomed to a horizontal shaft area, selected its boundary geometry, and left the perimeter highlighted with temporary dimensions and grips visible.","intent":"Inspect and adjust the horizontal shaft boundary.","app":"Autodesk Revit","details":"A selected horizontal enclosure with ODU and Shaft labels was visible."},{"start_s":13811.033,"end_s":13821.677,"action":"Canceled the prior operation, selected and dragged boundary geometry, then zoomed and panned across the floor plan to inspect adjacent shaft and apartment areas.","intent":"Refine or review floor-boundary geometry across nearby plan regions.","app":"Autodesk Revit","details":"The view moved from a wider plan context to a close-up of a shaft enclosure and adjacent rooms."},{"start_s":13821.677,"end_s":13831.391,"action":"Navigated across the floor plan and zoomed between apartment groups, then selected a shaft enclosure and began a rectangular boundary operation around the ODU/Shaft area.","intent":"Inspect and define the boundary around the shaft enclosure.","app":"Autodesk Revit","details":"The final close-up showed a magenta rectangular boundary around an ODU/Shaft region with a temporary dimension."},{"start_s":13831.391,"end_s":13841.0,"action":"Navigated around the GL floor plan by clicking and scrolling, zooming from a close-up of the ODU Shaft area to a wider plan view while remaining in Create Floor Boundary mode.","intent":"Inspect the floor plan and locate the boundary area for editing.","app":"Autodesk Revit","details":"Displayed the ODU Shaft and surrounding rooms with the floor boundary editing tools active."},{"start_s":13841.0,"end_s":13850.577,"action":"Zoomed and panned around the ODU Shaft, pressed Escape to cancel or exit an active sketch interaction, and continued manipulating the view and boundary geometry.","intent":"Refine or inspect the floor boundary near the ODU Shaft.","app":"Autodesk Revit","details":"The view alternated between close and wider views; sketch/edit controls remained active."},{"start_s":13850.577,"end_s":13860.595,"action":"Clicked and scrolled around the ODU Shaft region, zooming between close and wider views and initiating another rectangle boundary interaction around the shaft.","intent":"Create or adjust a floor boundary around the ODU Shaft.","app":"Autodesk Revit","details":"The shaft region was shown selected with magenta boundary geometry and temporary dimensions."},{"start_s":13860.595,"end_s":13870.857,"action":"Navigated across the floor plan with clicks and scrolling, moving from the shaft close-up to another building area and continuing floor-boundary editing.","intent":"Inspect and extend boundary work to another shaft or plan area.","app":"Autodesk Revit","details":"The view ended on a wider plan showing a 3BHK unit and multiple shaft locations."},{"start_s":13870.857,"end_s":13879.855,"action":"Panned and zoomed across the plan, then focused on an ODU Shaft detail and selected or adjusted a window element along the adjacent wall.","intent":"Inspect the shaft detail and nearby wall opening while editing the floor plan.","app":"Autodesk Revit","details":"The final view showed the ODU Shaft with a highlighted narrow window or wall element and a temporary 0.305 dimension."},{"start_s":13879.855,"end_s":13889.918,"action":"Pressed Escape, selected the upper wall or boundary edge near the ODU Shaft, then zoomed and panned out to review the broader floor plan.","intent":"Exit the local edit and review the resulting floor-boundary context.","app":"Autodesk Revit","details":"The view ended zoomed out over several units and labeled 3BHK areas, with boundary-edit mode still visible."},{"start_s":13889.918,"end_s":13899.533,"action":"Clicked repeatedly around the floor-plan view while Boundary Line mode remained active, then scrolled to reposition the view around the apartment layout.","intent":"Adjust the floor-plan view and interact with boundary placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with Boundary Line creation active."},{"start_s":13899.533,"end_s":13914.131,"action":"Clicked and scrolled through the floor plan, zooming and panning between apartment areas and shaft details; pressed Escape, then clicked near the view controls before the Revit window was hidden.","intent":"Navigate the plan and continue boundary-related editing.","app":"Autodesk Revit","details":"The view showed enlarged shaft and ODU details; the status bar indicated entering a rectangle diagonal point."},{"start_s":13914.131,"end_s":13930.016,"action":"Returned to Revit after a warning, reviewed the floor plan with a selected floor, pressed Escape, and clicked in the plan; the warning indicated that highlighted floors overlap.","intent":"Inspect and resolve or review an overlapping floor condition.","app":"Autodesk Revit","details":"A visible warning stated: “Highlighted floors overlap.”"},{"start_s":13930.016,"end_s":13939.117,"action":"Navigated to a raster-image-backed portion of the plan, selected the raster image, then initiated Place Wall and typed “WA”; the view ended zoomed on the toilets and shaft area.","intent":"Begin placing a wall along the plan near the toilet and shaft layout.","app":"Autodesk Revit","details":"Place Wall mode was active with Basic Wall type W3 and the raster image visible beneath the plan."},{"start_s":13939.117,"end_s":13949.305,"action":"Opened the wall-type selector, reviewed available Basic Wall types, clicked in the plan, pressed Escape, and returned to the floor-plan view while zooming around the ODU and Toilet-1 area.","intent":"Choose or adjust the wall type and position for wall placement.","app":"Autodesk Revit","details":"The wall-type list showed W2, W3, W4, W5, W6, W7, W8, and W9; the view later returned to Floor Plan mode."},{"start_s":13949.305,"end_s":13962.056,"action":"Scrolled and navigated around the shaft and toilet area, pressed Escape during the view changes, then re-entered Place Wall with Basic Wall W2 and clicked an endpoint beside the shaft.","intent":"Place a wall segment adjacent to the shaft.","app":"Autodesk Revit","details":"The final view showed a short cyan wall preview/segment beside the shaft, with Basic Wall W2 selected and endpoint placement active."},{"start_s":13962.056,"end_s":13967.128,"action":"Entered wall placement, clicked and adjusted the Revit view around the shaft area, then exited the transient command and resized the window.","intent":"Prepare the floor plan view for wall editing near the shaft.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with the shaft and adjacent fixtures."},{"start_s":13967.128,"end_s":13986.032,"action":"Selected the raster image and changed its draw-layer control, then activated wall placement and panned or zoomed to the right side of the floor plan while positioning a wall endpoint.","intent":"Edit the raster underlay and begin placing a wall in the floor plan.","app":"Autodesk Revit","details":"The Raster Images properties showed the Draw Layer menu with Foreground, Background, and Foreground options."},{"start_s":13986.032,"end_s":13999.084,"action":"Exited the wall operation, zoomed out to review the overall floor plan, then zoomed and panned back into the electrical-room and stair area while switching the raster image selection state.","intent":"Review the floor plan layout and inspect the shaft, stair, and electrical-room area.","app":"Autodesk Revit","details":"The view progressed from the full plan to a close-up around the electrical room and stairs."},{"start_s":13999.084,"end_s":14008.446,"action":"Panned and zoomed across the plan, typed brief navigation input, then resumed wall placement near the shaft and adjusted the view to the bedroom, lobby, and electrical-room area.","intent":"Navigate to another wall-editing location and continue positioning the wall.","app":"Autodesk Revit","details":"The final view showed Bedroom-2, adjacent toilets, the lobby, and the electrical room."},{"start_s":14008.446,"end_s":14018.681,"action":"Selected the raster image, zoomed and panned across the floor plan, and reviewed the lobby and surrounding apartment layouts without a visible new edit.","intent":"Inspect the underlay and surrounding floor-plan geometry.","app":"Autodesk Revit","details":"The view moved from the electrical-room area to a wider view showing multiple apartment units and the lobby."},{"start_s":14018.681,"end_s":14028.969,"action":"Panned and zoomed through several sections of the floor plan, moving from the central stair and lobby area to additional apartment clusters and reviewing their layouts.","intent":"Survey the floor plan and inspect apartment arrangements across the level.","app":"Autodesk Revit","details":"The final view showed multiple 3BHK units around the central lobby and corridor."},{"start_s":14028.969,"end_s":14038.712,"action":"Zoomed and adjusted the Revit floor plan around the selected Basic Wall W2, typed “SL,” canceled the input, and left the wall selected.","intent":"Inspect or modify the selected wall area.","app":"Autodesk Revit","details":"Floor Plan: GL; selected wall displayed in cyan."},{"start_s":14038.712,"end_s":14050.216,"action":"Canceled the active wall operation, opened the Architecture tools, and selected the floor boundary creation command, leaving Revit in floor-boundary sketch mode.","intent":"Begin editing or creating a floor boundary.","app":"Autodesk Revit","details":"Ribbon shows Modify | Create Floor Boundary with Boundary Line tools."},{"start_s":14050.216,"end_s":14060.169,"action":"Worked in floor-boundary sketch mode, selected points or edges around the plan, and attempted to place a rectangular boundary before canceling or repositioning the operation.","intent":"Define the floor sketch boundary.","app":"Autodesk Revit","details":"Status prompts indicate picking walls and entering the starting point of a rectangle."},{"start_s":14060.169,"end_s":14070.171,"action":"Canceled the sketch interaction and panned and zoomed across the GL floor plan to review the larger building layout.","intent":"Review the floor plan context after boundary editing.","app":"Autodesk Revit","details":"View moved from a close-up to a broader multi-unit lobby and apartment layout."},{"start_s":14070.171,"end_s":14083.056,"action":"Continued panning and zooming around the floor plan, then opened the selected floor type’s Type Properties dialog.","intent":"Inspect or edit the floor type properties.","app":"Autodesk Revit","details":"Type Properties opened for System Family: Floor, type SHAFT."},{"start_s":14083.056,"end_s":14092.074,"action":"Opened the type Rename dialog and edited the name text, correcting the entry toward “LOBBY” and submitting it.","intent":"Rename the floor type.","app":"Autodesk Revit","details":"Rename dialog is shown over Type Properties; text entry and Enter were used."},{"start_s":14092.074,"end_s":14101.801,"action":"Closed the Type Properties dialog, returned to the GL floor plan, and navigated the view while continuing the floor-boundary editing context.","intent":"Continue editing and inspecting the lobby floor boundary.","app":"Autodesk Revit","details":"The selected floor type was LOBBY; the plan showed a magenta boundary around lobby areas."},{"start_s":14101.801,"end_s":14111.763,"action":"Clicked and panned across the GL floor plan, zooming into the lobby and stair area while keeping the floor boundary sketch active.","intent":"Navigate to the next portion of the floor boundary for editing.","app":"Autodesk Revit","details":"The view moved from the broader plan to a close-up of a lobby labeled 15' 5\" x 9' 3\" and adjacent stairs."},{"start_s":14111.763,"end_s":14122.408,"action":"Selected and adjusted boundary segments around the lobby and Good's Lift area, then panned downward to inspect the connected lobby geometry.","intent":"Refine the floor boundary around the lobby and lift.","app":"Autodesk Revit","details":"Temporary dimensions appeared on the selected boundary segments, including a 14.000' horizontal span."},{"start_s":14122.408,"end_s":14132.719,"action":"Navigated to the lift-bank area, selected a boundary edge, and dragged it to adjust the sketch near the corridor and lifts.","intent":"Continue refining the floor perimeter around the lift lobby.","app":"Autodesk Revit","details":"The view showed two lifts, a lobby marker 4, and an active boundary segment with temporary dimensions."},{"start_s":14132.719,"end_s":14142.323,"action":"Exited the close boundary edit interaction, panned and zoomed through the GL plan, and reviewed the connected lobby and lift regions.","intent":"Inspect the edited floor boundary across the surrounding plan.","app":"Autodesk Revit","details":"The floor boundary remained highlighted while the view shifted from the lift area to a broader plan view."},{"start_s":14142.323,"end_s":14150.985,"action":"Zoomed out to review the overall floor footprint, then selected the floor and exited the sketch context, leaving the GL floor plan with the floor highlighted.","intent":"Finish reviewing the floor boundary and return to floor selection.","app":"Autodesk Revit","details":"The final view showed the floor selected in cyan around the central stair and lift cores; the ribbon changed to Modify | Floors."},{"start_s":14150.985,"end_s":14160.855,"action":"Clicked in the Revit floor plan view at two locations near the stair and corridor area.","intent":"Interact with the floor plan view.","app":"Autodesk Revit","details":null},{"start_s":14160.855,"end_s":14171.769,"action":"Scrolled through the GL floor plan, then selected the LOBBY floor; typed “CS” while the Revit window briefly moved or resized.","intent":"Navigate the floor plan and select a lobby floor element.","app":"Autodesk Revit","details":"The selected floor is shown highlighted as Floor: LOBBY: R5."},{"start_s":14171.769,"end_s":14181.523,"action":"Entered floor boundary creation mode, scrolled and clicked around the lobby and adjacent walls to begin defining a boundary.","intent":"Create or edit the LOBBY floor boundary.","app":"Autodesk Revit","details":"Revit displayed Modify | Create Floor Boundary with Boundary Line active."},{"start_s":14181.523,"end_s":14190.563,"action":"Continued placing and extending floor-boundary segments around the lobby, shafts, stair, and adjacent wall edges while panning the view.","intent":"Trace the floor boundary for the lobby area.","app":"Autodesk Revit","details":"Temporary dimensions and magenta boundary geometry appeared around the lobby and shaft edges."},{"start_s":14190.563,"end_s":14198.917,"action":"Pressed Escape to leave the boundary operation, zoomed or panned out to review the plan, and briefly resized or moved the Revit window before pressing Escape again.","intent":"Exit the boundary edit and review the resulting floor-plan area.","app":"Autodesk Revit","details":"The view returned to the broader GL floor plan, with the lobby region still outlined."},{"start_s":14198.917,"end_s":14208.845,"action":"Scrolled across the GL floor plan to the adjacent 3BHK unit, then clicked the LOBBY floor area to select it.","intent":"Navigate and inspect the lobby floor element in the floor plan.","app":"Autodesk Revit","details":"The LOBBY floor was highlighted in cyan and its properties were shown in the Properties panel."},{"start_s":14208.845,"end_s":14226.596,"action":"Returned to Autodesk Revit, viewed the PROJECT 11 3D model, and rotated the 3D view to a different orientation before switching away.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":null},{"start_s":14226.596,"end_s":14245.693,"action":"Switched to the GL floor plan, navigated around the stair and elevator area, and entered floor boundary creation mode for the selected floor.","intent":"Prepare the GL floor for boundary editing.","app":"Autodesk Revit","details":"The view ends in Modify | Create Floor Boundary mode with the LOBBY floor selected."},{"start_s":14245.693,"end_s":14254.446,"action":"Opened the floor type properties, selected Rename, and typed the new type name “STAIR CASE FLOOR,” then confirmed the name entry.","intent":"Rename the floor type for the stair-case floor.","app":"Autodesk Revit","details":"The Type Properties dialog is for System Family: Floor, type LOBBY."},{"start_s":14254.446,"end_s":14269.552,"action":"Reviewed the renamed STAIR CASE FLOOR type properties and clicked OK to close the Type Properties dialog.","intent":"Apply the renamed floor type and return to boundary editing.","app":"Autodesk Revit","details":null},{"start_s":14269.552,"end_s":14278.568,"action":"Zoomed and panned around the stair area, selected boundary-editing geometry, and began positioning a rectangular floor-boundary segment near the stairs and shafts.","intent":"Define the stair-case floor boundary on the GL plan.","app":"Autodesk Revit","details":"The status bar indicates that the rectangle tool is awaiting the starting point."},{"start_s":14278.568,"end_s":14288.282,"action":"Continued zooming and panning across the GL floor plan, canceled the active operation, then navigated to another stair and shaft area while remaining in Create Floor Boundary mode.","intent":"Continue locating and editing the floor boundary around the stair areas.","app":"Autodesk Revit","details":"The final view is tightly zoomed on the FHC shaft and adjacent stair pressurization shaft."},{"start_s":14288.282,"end_s":14308.021,"action":"Exited and re-entered Revit dialogs, navigated the floor plan, and activated floor boundary editing for the selected stair case floor.","intent":"Prepare the selected floor for boundary modification.","app":"Autodesk Revit","details":"Floor Plan: GL; selected type was STAIR CASE FLOOR."},{"start_s":14308.021,"end_s":14314.098,"action":"Opened Type Properties for the stair case floor, chose Rename, and entered “ELECTRICAL ROOM” in the Name dialog.","intent":"Rename the floor type to identify the electrical room.","app":"Autodesk Revit","details":"The Name dialog remained open while the new name was typed."},{"start_s":14314.098,"end_s":14325.63,"action":"Confirmed the renamed type as ELECTRICAL ROOM, returned to the floor plan, and entered rectangle boundary drawing mode.","intent":"Use the renamed floor type while creating or editing its boundary.","app":"Autodesk Revit","details":"The status bar prompted for the rectangle’s starting point."},{"start_s":14325.63,"end_s":14338.87,"action":"Canceled the active boundary operation, navigated and zoomed the floor plan, then switched to Windows Explorer.","intent":"Review the floor plan and leave the Revit workspace.","app":"Autodesk Revit","details":"Revit ended on a zoomed-out GL floor plan before the application switch."},{"start_s":14338.87,"end_s":14350.493,"action":"Briefly switched through the recorder and a Windows notification, returned to Revit, and panned and zoomed across the GL floor plan.","intent":"Continue reviewing different areas of the floor plan.","app":"Autodesk Revit","details":"A WhatsApp notification appeared while Revit remained visible."},{"start_s":14350.493,"end_s":14359.967,"action":"Continued panning and zooming through the GL floor plan, moving from the central building layout to a detailed elevator and shaft area.","intent":"Inspect additional floor-plan regions.","app":"Autodesk Revit","details":"The final view showed four lifts, the STP Exhaust Shaft, and adjacent shafts."},{"start_s":14359.967,"end_s":14369.771,"action":"Navigated the Revit GL floor plan by scrolling and panning, then selected points around the building layout and briefly hid and restored the application window.","intent":"Inspect the floor-plan area and reposition the view.","app":"Autodesk Revit","details":"GL floor plan remained visible; the view shifted to different rooms and shaft areas."},{"start_s":14369.771,"end_s":14379.89,"action":"Scrolled and panned the GL floor plan, entered Create Floor Boundary mode, and began defining a floor boundary around the shaft area with clicks and a short drag.","intent":"Create or edit a floor boundary in the selected plan area.","app":"Autodesk Revit","details":"Ribbon showed Modify | Create Floor Boundary, with Boundary Line and Chain controls visible."},{"start_s":14379.89,"end_s":14388.394,"action":"Clicked around the shaft cluster while continuing floor-boundary placement, then zoomed or panned to review the selected FHC shaft and adjacent Staircase Press. Shaft.","intent":"Refine and inspect the floor boundary geometry.","app":"Autodesk Revit","details":"The FHC Shaft.02 area was selected with magenta boundary highlighting and temporary dimensions."},{"start_s":14388.394,"end_s":14396.095,"action":"Panned the floor-plan view slightly across the shaft and lift area while keeping the boundary-editing context active.","intent":"Reposition the view for continued boundary editing or inspection.","app":"Autodesk Revit","details":"No clear geometry change was visible; the plan remained in Create Floor Boundary mode."},{"start_s":14396.095,"end_s":14406.655,"action":"Panned and zoomed across the GL plan from the lift bank toward the shaft cluster, clicking within the view while maintaining the floor-boundary editing context.","intent":"Navigate to another portion of the plan to continue boundary work.","app":"Autodesk Revit","details":"The view moved from multiple lifts to FHC, Lobby Press. Shaft, Staircase Press. Shaft, and PHE Shaft labels."},{"start_s":14406.655,"end_s":14417.042,"action":"Scrolled and zoomed into the FHC Shaft.01 area, then clicked to select or place a rectangular boundary segment around the shaft.","intent":"Define or adjust the floor boundary around the FHC shaft.","app":"Autodesk Revit","details":"The final view showed the FHC Shaft.01 rectangle selected in magenta with a temporary dimension and the status prompt to enter a diagonal point."},{"start_s":14417.042,"end_s":14427.33,"action":"Adjusted the floor boundary rectangle around the shaft area, clicking and scrolling while moving the view downward; left the boundary-edit tool active.","intent":"Refine the floor boundary around the shaft opening.","app":"Autodesk Revit","details":"Floor plan GL showed shaft labels including Lobby Press. Shaft and Staircase Press. Shaft."},{"start_s":14427.33,"end_s":14436.853,"action":"Continued panning and zooming down the floor plan, then adjusted the boundary around the staircase and adjacent shaft regions.","intent":"Continue refining the floor boundary geometry in the shaft area.","app":"Autodesk Revit","details":"The view moved from the staircase shaft to lower shaft regions, with boundary edges and dimensions visible."},{"start_s":14436.853,"end_s":14448.426,"action":"Panned and zoomed out across the floor plan, bringing the elevator bank, surrounding rooms, and central circulation areas into view while continuing boundary editing.","intent":"Review the floor boundary in relation to the broader floor layout.","app":"Autodesk Revit","details":"The view expanded to show four lifts, a goods lift, rooms, and shaft annotations."},{"start_s":14448.426,"end_s":14460.517,"action":"Panned and selected floor geometry, then exited the boundary-edit context and selected the floor element; opened the floor type properties.","intent":"Inspect the floor element and prepare to rename its type.","app":"Autodesk Revit","details":"Revit switched to Modify | Floors, with the floor selected and the Type Properties dialog opened."},{"start_s":14460.517,"end_s":14464.958,"action":"Switched to the Type Properties dialog for the SHΑFT floor type, typed \"LIFT\" into the rename workflow, and opened the naming dialog.","intent":"Start renaming the floor type.","app":"Autodesk Revit","details":"The Type Properties dialog showed System Family: Floor and type SHAFT; the Rename action was active."},{"start_s":14464.958,"end_s":14471.413,"action":"Entered the full name \"LIFT FLOORING\" in the Name dialog and left the dialog open without confirming.","intent":"Set the proposed new floor type name.","app":"Autodesk Revit","details":"The Name field visibly contained LIFT FLOORING, with OK and Cancel buttons available."},{"start_s":14471.413,"end_s":14481.566,"action":"Closed the Type Properties dialog, returned to the GL floor plan, and zoomed or panned around the selected lift flooring elements.","intent":"Inspect the lift flooring layout in the floor plan.","app":"Autodesk Revit","details":"The Type Properties dialog showed the LIFT FLOORING floor type; the floor plan displayed multiple lift images."},{"start_s":14481.566,"end_s":14498.659,"action":"Exited the active boundary operation and zoomed out and around the GL floor plan, leaving the lift flooring elements selected.","intent":"Review the placement and extent of the lift flooring elements.","app":"Autodesk Revit","details":"The view progressed from a close-up of four lifts to a wider apartment floor-plan view."},{"start_s":14498.659,"end_s":14503.168,"action":"Opened the Rename dialog for the floor type, changed LIFT FLOORING to LIFT FLOORING 1, and confirmed the rename.","intent":"Create a distinct floor type name for the lift flooring.","app":"Autodesk Revit","details":"The Type Properties dialog showed the resulting type name as LIFT FLOORING 1."},{"start_s":14503.168,"end_s":14511.18,"action":"Returned to the floor plan, selected the lift flooring elements, zoomed the view, and reopened Type Properties.","intent":"Continue editing the renamed lift flooring type.","app":"Autodesk Revit","details":"The selected lift floors were highlighted in cyan before Type Properties was reopened."},{"start_s":14511.18,"end_s":14516.218,"action":"Opened the duplicate-type naming dialog, accepted the proposed name LIFT FLOORING 2, and confirmed the duplicate in Type Properties.","intent":"Create a second floor type variant for the lift flooring.","app":"Autodesk Revit","details":"The Type Properties dialog displayed the new type as LIFT FLOORING 2."},{"start_s":14516.218,"end_s":14525.582,"action":"Exited the type dialog and returned to the GL floor plan, then activated floor boundary editing for LIFT FLOORING 1 within the Temporary Hide/Isolate view.","intent":"Modify or inspect the boundary of the lift flooring element.","app":"Autodesk Revit","details":"The final view showed the lift flooring selected with the Modify | Create Floor Boundary tools active."},{"start_s":14525.582,"end_s":14535.722,"action":"Switched to Revit, activated floor boundary creation, and began drawing a rectangular boundary over a lift area.","intent":"Create or edit the floor boundary for the lift flooring.","app":"Autodesk Revit","details":"Selected floor type LIFT FLOORING 2 in the GL floor plan."},{"start_s":14535.722,"end_s":14545.452,"action":"Panned across the lift plan and placed additional rectangle points, leaving a magenta rectangular boundary with temporary dimensions around a lift.","intent":"Continue outlining the floor region.","app":"Autodesk Revit","details":"Boundary sketch remained active."},{"start_s":14545.452,"end_s":14560.684,"action":"Navigated across adjacent lift areas and drew additional rectangular boundary segments, ending with the view centered on GOOD'S LIFT.","intent":"Extend the floor boundary sketch across the required lift areas.","app":"Autodesk Revit","details":"The final view showed a magenta rectangle around GOOD'S LIFT, labeled 7' 6\" x 10' 0\"."},{"start_s":14560.684,"end_s":14577.984,"action":"Exited the boundary sketch and selected the floor over GOOD'S LIFT; dismissed warning and navigated back to the floor plan.","intent":"Review the floor element and handle the overlap warning.","app":"Autodesk Revit","details":"A warning reported that highlighted floors overlap; the selected floor was LIFT FLOORING 2."},{"start_s":14577.984,"end_s":14590.104,"action":"Opened the floor type rename dialog and replaced the existing name with OUTDOOR FLOORING.","intent":"Rename the floor type.","app":"Autodesk Revit","details":"The name field in the Type Properties dialog contained OUTDOOR FLOORING."},{"start_s":14590.104,"end_s":14604.843,"action":"Confirmed the renamed floor type and returned to the GL floor plan, then panned the view while keeping floor boundary editing active.","intent":"Apply the new floor type name and continue floor-plan editing.","app":"Autodesk Revit","details":"Properties showed floor type OUTDOOR FLOORING; no new boundary segment was completed during the span."},{"start_s":14604.843,"end_s":14616.984,"action":"Clicked and panned across the floor plan while using the active Create Floor Boundary tool, repositioning the view to another boundary segment.","intent":"Continue inspecting or tracing the floor boundary.","app":"Autodesk Revit","details":"Floor Plan: GL remained in Modify | Create Floor Boundary mode; the visible boundary was magenta."},{"start_s":14616.984,"end_s":14627.123,"action":"Clicked and panned across several floor-plan regions, moving from a horizontal boundary segment to a vertical corner and adjacent area.","intent":"Continue navigating the plan while working on the floor boundary.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active and temporary dimensions appeared near the boundary."},{"start_s":14627.123,"end_s":14637.234,"action":"Clicked and panned toward the right side of the plan, bringing an exterior corner and the labeled Exhaust Shaft area into view.","intent":"Inspect and continue the floor boundary around the plan perimeter.","app":"Autodesk Revit","details":"The active boundary included magenta and cyan-highlighted segments with temporary dimensions."},{"start_s":14637.234,"end_s":14646.785,"action":"Continued panning and clicking around the right-side plan area, moving past the Exhaust Shaft and along another horizontal boundary segment.","intent":"Navigate to and inspect additional floor-boundary segments.","app":"Autodesk Revit","details":"Revit briefly reported system configuration and network-related changes; Create Floor Boundary mode remained active."},{"start_s":14646.785,"end_s":14655.41,"action":"Selected the floor boundary area and scrolled the view, leaving a long horizontal boundary segment visible with a temporary 15.167 dimension.","intent":"Review or position the floor boundary for continued editing.","app":"Autodesk Revit","details":"The floor element remained selected and the boundary was highlighted magenta."},{"start_s":14655.41,"end_s":14665.329,"action":"Panned and scrolled out across the floor plan, then repositioned the view to a lower 3BHK area with a highlighted horizontal boundary and a 4.500 dimension.","intent":"Inspect another portion of the floor boundary.","app":"Autodesk Revit","details":"The final view showed the 3BHK label and an active magenta/cyan boundary segment."},{"start_s":14665.329,"end_s":14675.446,"action":"Clicked and adjusted the floor boundary near the 3BHK area, then panned or zoomed the Revit plan while keeping the boundary sketch active.","intent":"Refine the floor boundary geometry.","app":"Autodesk Revit","details":"Floor boundary creation mode remained active."},{"start_s":14675.446,"end_s":14686.099,"action":"Clicked and navigated around the plan, panning or zooming to inspect the boundary near the 3BHK 1723 Sqft annotation.","intent":"Inspect boundary placement against the plan layout.","app":"Autodesk Revit","details":"The 3BHK 1723 Sqft label and nearby boundary lines were visible."},{"start_s":14686.099,"end_s":14696.389,"action":"Panned and zoomed across the floor plan, clicked near boundary segments, and ended with a broader view showing multiple apartment layouts and a 3BHK 2001 Sft label.","intent":"Review the overall floor boundary and apartment layout.","app":"Autodesk Revit","details":"No explicit boundary completion was shown."},{"start_s":14696.389,"end_s":14706.265,"action":"Zoomed and panned out from a boundary corner to review a larger sheet view containing several floor plans and a schedule table.","intent":"Review the floor plan context and associated schedule.","app":"Autodesk Revit","details":"The active floor boundary sketch remained visible during navigation."},{"start_s":14706.265,"end_s":14716.583,"action":"Navigated and zoomed to another apartment area, clicked boundary geometry, and selected or adjusted a sketch segment around a white floor region.","intent":"Modify or inspect another portion of the floor boundary.","app":"Autodesk Revit","details":"Boundary sketch lines and temporary dimensions were visible."},{"start_s":14716.583,"end_s":14728.047,"action":"Selected a boundary line, then panned and zoomed across the plan while keeping the floor boundary sketch active.","intent":"Continue reviewing the boundary geometry across the plan.","app":"Autodesk Revit","details":"The view ended on a broader plan area with the sketch selection still active."},{"start_s":14728.047,"end_s":14739.36,"action":"Scrolled through the GL floor plan while remaining in Create Floor Boundary mode; the view shifted across apartment layouts and boundary geometry.","intent":"Review different areas of the floor plan before continuing boundary work.","app":"Autodesk Revit","details":null},{"start_s":14739.36,"end_s":14749.85,"action":"Continued scrolling through the GL floor plan, moving from a broader apartment view to a closer view of rooms and circulation areas.","intent":"Navigate to another floor-plan area for inspection or boundary editing.","app":"Autodesk Revit","details":null},{"start_s":14749.85,"end_s":14759.504,"action":"Adjusted the view and clicked around the floor-plan geometry, selecting boundary and wall elements near the apartment layout; the selected floor/wall geometry became highlighted.","intent":"Inspect or prepare floor-boundary elements for editing.","app":"Autodesk Revit","details":"The view remained in Modify | Create Floor Boundary mode and showed selected OUTDOOR FLOORING/floor geometry."},{"start_s":14759.504,"end_s":14769.868,"action":"Clicked multiple boundary endpoints and wall edges, then pressed Escape and scrolled; temporary dimensions and boundary highlights appeared while the view moved across the plan.","intent":"Continue editing and checking the floor boundary around adjacent rooms.","app":"Autodesk Revit","details":"Highlighted magenta and blue boundary segments and temporary dimensions were visible."},{"start_s":14769.868,"end_s":14779.595,"action":"Zoomed and panned out to review most of the floor plan, then clicked and dragged near several boundary segments and room edges.","intent":"Review the overall boundary layout and adjust selected geometry.","app":"Autodesk Revit","details":"The plan briefly displayed nearly the full sheet, including the apartment layout and schedule table, before returning to a closer view."},{"start_s":14779.595,"end_s":14789.574,"action":"Navigated to another close-up area and clicked boundary points and wall edges, producing temporary angular and linear dimensions while continuing the floor-boundary edit.","intent":"Refine or inspect boundary connections in the selected floor-plan region.","app":"Autodesk Revit","details":"Create Floor Boundary mode remained active, with magenta boundary lines, blue selected segments, and temporary dimensions visible."},{"start_s":14789.574,"end_s":14800.369,"action":"Exited the active boundary-editing context, navigated the GL floor plan with repeated middle-clicks and scrolls, and zoomed into a floor-plan area showing a labeled lift graphic.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":"The view changed from boundary editing to the standard Architecture ribbon and a close-up plan view."},{"start_s":14800.369,"end_s":14818.654,"action":"Navigated to and selected the two adjacent lift-flooring regions, then used keyboard and mouse interactions while remaining in floor editing mode.","intent":"Inspect or adjust the lift flooring elements.","app":"Autodesk Revit","details":"The selected element was shown as Floor: LIFT FLOORING 2, with two highlighted square openings."},{"start_s":14818.654,"end_s":14824.692,"action":"Opened the floor type selector, reviewed the available floor types, and returned focus to the selected lift-flooring element.","intent":"Review available floor types for the selected floor.","app":"Autodesk Revit","details":"The type list displayed entries including BEDROOM, DINING FLOOR, DRAWING FLOORING, and LIFT FLOORING 2."},{"start_s":14824.692,"end_s":14829.328,"action":"Opened Type Properties for LIFT FLOORING 2, opened the Rename dialog, edited the name field, and returned to the type properties dialog.","intent":"Rename or modify the selected floor type.","app":"Autodesk Revit","details":"The Rename dialog showed the current name LIFT FLOORING 2; the final visible state was Type Properties."},{"start_s":14829.328,"end_s":14840.341,"action":"Closed the type-properties interaction, returned to the GL floor plan, selected the lift-flooring element again, and briefly reopened the floor type list before dismissing it.","intent":"Continue reviewing the floor type and plan element.","app":"Autodesk Revit","details":"The floor type list visibly highlighted LIFT FLOORING 2 before the view returned to the plan."},{"start_s":14840.341,"end_s":14850.387,"action":"Opened the floor type selector, reviewed and navigated its entries, then dismissed it and zoomed out to a broader view of the GL floor plan.","intent":"Inspect floor types and review their placement in the overall plan.","app":"Autodesk Revit","details":"The final view showed a larger portion of the floor plan with the lift area visible near the lower center."},{"start_s":14850.387,"end_s":14865.817,"action":"Activated the floor boundary tool, navigated the GL floor plan, and adjusted the view around the lift-flooring area while switching and resizing Revit windows.","intent":"Continue editing a floor boundary in the GL floor plan.","app":"Autodesk Revit","details":"The view showed the lift image and floor boundary; the span ended with Revit active in floor-boundary creation mode."},{"start_s":14865.817,"end_s":14881.608,"action":"Exited and re-entered floor-boundary editing, selected the lift-flooring region, zoomed and panned across the GL plan, and activated temporary isolate mode.","intent":"Inspect and modify the selected lift-flooring floor boundary.","app":"Autodesk Revit","details":"Three rectangular floor regions were highlighted before the view changed to a temporarily isolated lift-flooring area."},{"start_s":14881.608,"end_s":14897.518,"action":"Dismissed the overlap warning, exited floor editing, and zoomed and panned across the plan while selecting floor geometry for review.","intent":"Resolve or inspect overlapping floor geometry.","app":"Autodesk Revit","details":"Revit displayed the warning “Highlighted floors overlap,” and the selected floor geometry changed as the plan view was navigated."},{"start_s":14897.518,"end_s":14901.944,"action":"Opened floor Type Properties, renamed the duplicated floor type from “LIFT FLOORING 3” to “STP,” and returned to the Type Properties dialog.","intent":"Create and name a floor type for the STP floor.","app":"Autodesk Revit","details":"The dialog showed System Family: Floor and the resulting type name “STP.”"},{"start_s":14901.944,"end_s":14911.884,"action":"Closed the type dialog, edited the STP floor boundary around the labeled STP Exhaust Shaft, and switched from the GL floor plan to the 3D view.","intent":"Define the STP floor boundary and inspect the model in 3D.","app":"Autodesk Revit","details":"The plan showed the STP Exhaust Shaft with boundary dimensions during editing; the span ended in the {3D} view."},{"start_s":14911.884,"end_s":14922.075,"action":"Navigated the 3D view by orbiting, panning, and zooming around the building model to inspect the floor layout.","intent":"Review the updated building model in three dimensions.","app":"Autodesk Revit","details":"The view progressed from a partial building close-up to a broader isometric view of the multi-room model."},{"start_s":14922.075,"end_s":14931.394,"action":"Clicked and dragged in the Revit 3D view, then scrolled to reveal the building model.","intent":"Inspect the 3D building model.","app":"Autodesk Revit","details":"The view changed from a blank area to an isometric multi-room building model."},{"start_s":14931.394,"end_s":14942.803,"action":"Selected a floor in the Revit 3D view, navigated around the model with middle-button actions and scrolling, then returned to an unselected view.","intent":"Inspect the floor and adjust the 3D view.","app":"Autodesk Revit","details":"A floor was selected and shown with turquoise surfaces before the selection was cleared."},{"start_s":14942.803,"end_s":14955.519,"action":"Switched from Revit to Photos and zoomed and panned across the first-floor plan image, moving from the full plan to detailed bedroom, living, and kitchen areas.","intent":"Review the reference floor plan image.","app":"Photos","details":"Opened image: 1--Block-A-First-Floor-Plan-[hidden]-ebcec562.jpg.jpeg."},{"start_s":14955.519,"end_s":14960.176,"action":"Activated the Snipping Tool overlay and dragged a rectangular selection over the floor-plan image, then returned to Photos and copied the selection to the clipboard before switching back toward Revit.","intent":"Capture a portion of the reference floor plan for use in the project.","app":"Snipping Tool / Photos","details":"The captured region covered the bedroom, living, and kitchen portion of the plan."},{"start_s":14960.176,"end_s":14965.49,"action":"Switched back to Revit, navigated the 3D model with middle-button clicks and scrolling, and selected a wall near the upper portion of the building.","intent":"Continue inspecting the Revit model and select a related element.","app":"Autodesk Revit","details":"The selected element was identified in the status bar as a basic wall."},{"start_s":14965.49,"end_s":14973.009,"action":"Opened Type Properties for the BEDROOM floor, then opened Edit Assembly to inspect its layer structure and materials.","intent":"Review the bedroom floor construction assembly.","app":"Autodesk Revit","details":"The assembly showed a wood sheathing finish layer, wrap boundaries, and a structural timber joist/rafter layer."},{"start_s":14973.009,"end_s":14987.336,"action":"Switched among Revit material and asset windows, opened the material context menu, duplicated or renamed the default material, and entered “BEDROOM FLOORING” in the material name field before opening the appearance image selector.","intent":"Create and configure a bedroom flooring material in Revit.","app":"Autodesk Revit","details":"The material browser shows BEDROOM FLOORING selected and the Appearance tab active at the end."},{"start_s":14987.336,"end_s":14997.841,"action":"Opened the Select File dialog from the material appearance image control, then navigated between Desktop and Gallery locations while reviewing available image files.","intent":"Locate an image file to use as the material appearance texture.","app":"Autodesk Revit","details":"The file dialog remained open with image files listed and a JPG filename populated."},{"start_s":14997.841,"end_s":15008.854,"action":"Navigated through This PC and Desktop in the Select File dialog, scrolling the folder and file listings without confirming a file.","intent":"Continue searching for a suitable material texture image.","app":"Autodesk Revit","details":"The dialog remained open on Desktop with folders visible."},{"start_s":15008.854,"end_s":15019.903,"action":"Opened the Pictures folder and scrolled through its image list, then navigated into Screenshots while continuing to inspect available files.","intent":"Search additional image folders for the material texture.","app":"Autodesk Revit","details":"The Select File dialog remained open in the Screenshots folder."},{"start_s":15019.903,"end_s":15036.78,"action":"Scrolled through image files in Pictures and Gallery, selected a screenshot PNG, and clicked Open to return to the Revit material browser.","intent":"Choose an image file for the bedroom flooring material appearance.","app":"Autodesk Revit","details":"A screenshot PNG was selected in the file dialog before the Open command."},{"start_s":15036.78,"end_s":15046.386,"action":"Returned to the material browser, confirmed the material dialog, opened Type Properties from Edit Assembly, and then returned to the 3D Revit view.","intent":"Apply the material changes and review the floor assembly in the model.","app":"Autodesk Revit","details":"The final view shows the selected BEDROOM floor in a Revit 3D model, with Type Properties active at the end."},{"start_s":15046.386,"end_s":15054.692,"action":"Opened the BEDROOM floor assembly’s material controls, switched through the Material Browser and Texture Editor, and edited the texture scale by entering 3 feet.","intent":"Adjust the bedroom flooring material texture settings.","app":"Autodesk Revit","details":"The Edit Assembly dialog remained visible behind the Material Browser and Texture Editor."},{"start_s":15054.692,"end_s":15066.763,"action":"Confirmed the material and type-property dialogs, returned to the 3D view, and navigated the model with scrolling and middle-button view controls before switching to Windows Explorer.","intent":"Apply the material/type changes and inspect the resulting floor in the model.","app":"Autodesk Revit","details":"The 3D view showed multiple selected bedroom floors and then a close-up of a floor and wall."},{"start_s":15066.763,"end_s":15071.351,"action":"Returned from the desktop transition to Revit, reopened Type Properties and Edit Assembly, and opened the BEDROOM FLOORING Material Browser.","intent":"Continue editing the bedroom floor material.","app":"Autodesk Revit","details":"The selected bedroom floor was visible before the assembly and material dialogs reopened."},{"start_s":15071.351,"end_s":15075.582,"action":"Switched between the Material Browser and Texture Editor, displaying the BEDROOM FLOORING image texture and its preview at approximately 3-by-3-foot dimensions.","intent":"Review the flooring texture appearance and scale.","app":"Autodesk Revit","details":"The texture preview showed a light-colored surface."},{"start_s":15075.582,"end_s":15082.721,"action":"Opened the texture image file picker from the Material Browser, browsed the Screenshots folder, and selected a screenshot file for the material image.","intent":"Choose or replace the image used by the bedroom flooring material.","app":"Autodesk Revit","details":"The Select File dialog listed PNG and JPG files, with a screenshot filename selected."},{"start_s":15082.721,"end_s":15090.171,"action":"Opened the material Color control, returned to the Texture Editor, and edited the BEDROOM.jpg texture scale by entering 3 feet for the sample size.","intent":"Set the bedroom flooring image and texture scale.","app":"Autodesk Revit","details":"The Texture Editor preview showed a light pink-white texture, with the sample size field set to 3.00 feet."},{"start_s":15090.171,"end_s":15099.918,"action":"Reviewed the BEDROOM floor assembly layers in Edit Assembly, then closed the dialog and returned to the 3D view.","intent":"Inspect the bedroom floor construction and resume model viewing.","app":"Autodesk Revit","details":"The assembly showed bedroom flooring, a 0.420-inch structural layer, and boundary layers."},{"start_s":15099.918,"end_s":15118.725,"action":"Navigated and zoomed around the Revit model, switched from the 3D view to the GL floor plan, and selected the plan raster image.","intent":"Inspect the model and floor-plan reference.","app":"Autodesk Revit","details":"The GL floor plan displayed a building layout with the raster image selected."},{"start_s":15118.725,"end_s":15128.733,"action":"Reviewed the GL floor plan and raster image, then switched back to the 3D view and selected the WIDE BALCONY floor.","intent":"Inspect and select the balcony element for editing.","app":"Autodesk Revit","details":"The selected WIDE BALCONY floor was visible in the 3D model."},{"start_s":15128.733,"end_s":15132.871,"action":"Opened Edit Assembly for the WIDE BALCONY floor and opened its material browser from the Wood Sheathing, Chipboard layer.","intent":"Edit the balcony floor assembly material.","app":"Autodesk Revit","details":"The assembly showed Wood Sheathing, Chipboard as the finish material and a structural timber joist/rafter layer."},{"start_s":15132.871,"end_s":15141.388,"action":"Switched the material browser to Default New Material and entered the name WIDE BALCONY, then opened the appearance image selection control.","intent":"Create or rename a material for the balcony assembly.","app":"Autodesk Revit","details":"The material browser displayed Default New Material with appearance properties."},{"start_s":15141.388,"end_s":15145.563,"action":"Selected WIDE BALCONY.jpg from the Downloads file dialog and confirmed it, returning to the material browser with the image assigned.","intent":"Assign the balcony image texture to the material.","app":"Autodesk Revit","details":"The appearance panel showed WIDE BALCONY.jpg as the selected image."},{"start_s":15145.563,"end_s":15150.291,"action":"Closed the floor type dialog and returned to the Revit 3D view, then selected the model area.","intent":"Return to the project view after reviewing floor type properties.","app":"Autodesk Revit","details":"Reviewed the WIDE BALCONY floor type and dismissed its properties window."},{"start_s":15150.291,"end_s":15158.823,"action":"Opened the WIDE BALCONY floor assembly, opened its material browser and texture editor, adjusted the texture settings, and entered a value of 3 before confirming the edit.","intent":"Modify the balcony floor assembly material or texture properties.","app":"Autodesk Revit","details":"The material uses WIDE BALCONY.jpg; the texture editor and material browser were visible."},{"start_s":15158.823,"end_s":15162.969,"action":"Applied the material changes, closed the material browser, and returned through the assembly dialog to the floor type properties window.","intent":"Commit the edited balcony material and return to floor type settings.","app":"Autodesk Revit","details":"WIDE BALCONY remained selected in the material browser; the Type Properties dialog was reopened."},{"start_s":15162.969,"end_s":15173.291,"action":"Dismissed the properties dialog and navigated the 3D model with repeated middle-button pans and zooms, moving from a closer wall view to a broader building view.","intent":"Inspect the model after applying the floor material changes.","app":"Autodesk Revit","details":"The 3D view showed the building walls and floor elements at changing zoom levels."},{"start_s":15173.291,"end_s":15190.969,"action":"Switched from the 3D view to the GL floor plan and used middle-button navigation to zoom and pan across the plan, ending on a close-up of the stair area.","intent":"Inspect the floor plan and locate the stair region.","app":"Autodesk Revit","details":"The GL floor plan changed from a broad apartment layout to a detailed stair and adjacent room view."},{"start_s":15190.969,"end_s":15200.293,"action":"Activated the stair creation tool, selected a stair type, and clicked in the stairwell area to begin placing a stair run.","intent":"Start creating or modifying a stair in the GL floor plan.","app":"Autodesk Revit","details":"The Modify | Create Stair ribbon was active; the selected stair type changed to Cast-In-Place Stair, and the interface prompted for a run start point."},{"start_s":15200.293,"end_s":15210.273,"action":"Adjusted the stair sketch view by clicking and scrolling, then repositioned the view while remaining in Create Stair sketch mode.","intent":"Navigate and prepare the stair sketch for continued editing.","app":"Autodesk Revit","details":"The GL floor plan showed a monolithic stair run with the sketch boundary active."},{"start_s":15210.273,"end_s":15221.151,"action":"Selected the horizontal stair boundary, adjusted the view, and entered or continued editing the stair/ramp sketch with the boundary highlighted.","intent":"Define the stair run boundary before adding sketch elements.","app":"Autodesk Revit","details":"The selected horizontal element was labeled as a horizontal and extension boundary."},{"start_s":15221.151,"end_s":15231.593,"action":"Scrolled and repositioned the plan, then clicked successive points to begin laying out stair sketch geometry near the Up and Dn markers.","intent":"Continue constructing the stair layout in the sketch.","app":"Autodesk Revit","details":"The view remained in Modify | Create Stair > Sketch Run with green boundary lines and a newly previewed run element."},{"start_s":15231.593,"end_s":15241.733,"action":"Selected and adjusted a vertical riser segment, then clicked additional points to preview the next stair sketch element and its temporary dimensions.","intent":"Add and position riser geometry within the stair run.","app":"Autodesk Revit","details":"A cyan vertical riser and temporary angular dimensions were visible in the active sketch."},{"start_s":15241.733,"end_s":15251.725,"action":"Added successive vertical stair sketch segments across the run by clicking near the lower and upper boundaries, reviewing temporary dimensions, and canceling or resetting intermediate previews.","intent":"Lay out repeated risers across the stair flight.","app":"Autodesk Revit","details":"Multiple vertical sketch lines and temporary dimensions appeared between the green boundaries."},{"start_s":15251.725,"end_s":15261.761,"action":"Continued placing and adjusting the remaining right-side riser geometry, then clicked to start another sketch point while panning toward the run end.","intent":"Complete the stair riser layout toward the endpoint.","app":"Autodesk Revit","details":"The right end of the stair run and a final temporary dimension were visible; sketch mode remained active."},{"start_s":15261.761,"end_s":15272.253,"action":"Adjusted the stair sketch view and clicked near the right end of the stair boundary, pressing Escape between selections; left the stair in sketch-edit mode with a boundary dimension visible.","intent":"Refine or inspect the stair boundary geometry.","app":"Autodesk Revit","details":"Floor Plan: GL; stair sketch editing remained active."},{"start_s":15272.253,"end_s":15281.946,"action":"Selected the right-side stair sketch line, pressed Escape, and panned the view downward while continuing to work in the stair sketch.","intent":"Continue positioning and inspecting stair sketch elements.","app":"Autodesk Revit","details":"A boundary/model line was highlighted before the view was panned."},{"start_s":15281.946,"end_s":15291.394,"action":"Panned across the stair area and clicked successive sketch locations, adding or adjusting stair riser geometry; the visible count increased from 12 to 13 risers created.","intent":"Extend the stair run by placing additional risers.","app":"Autodesk Revit","details":"Stair sketch remained active in the GL plan view."},{"start_s":15291.394,"end_s":15301.604,"action":"Clicked successive positions across the stair run to continue placing risers, pressing Escape between placements; the visible progress advanced through 16 and 17 risers created.","intent":"Continue creating the stair risers.","app":"Autodesk Revit","details":"The stair sketch showed remaining risers as the run was extended."},{"start_s":15301.604,"end_s":15311.379,"action":"Placed additional risers at successive positions toward the right side of the run, pressing Escape between placements; the visible progress reached 19 and then 21 risers created.","intent":"Complete more of the stair riser sequence.","app":"Autodesk Revit","details":"Riser placement continued in the GL floor plan."},{"start_s":15311.379,"end_s":15329.645,"action":"Exited the tight sketch interaction, zoomed or panned to show the full stair area, and switched from the GL floor plan to the 3D view while keeping the stair selected in Create Stair mode.","intent":"Review the stair in the overall model after editing its sketch.","app":"Autodesk Revit","details":"The final view was Autodesk Revit 3D View: {3D}, showing the building model and the selected stair."},{"start_s":15329.645,"end_s":15346.785,"action":"Dismissed the stair warning, navigated between the 3D view and GL floor plan, and zoomed/panned around the model to inspect the stair.","intent":"Inspect the stair and its warning in different project views.","app":"Autodesk Revit","details":"The 3D view showed the building and a close-up of the stair."},{"start_s":15346.785,"end_s":15351.758,"action":"Opened Type Properties for the selected cast-in-place stair, closed the dialog, and selected a railing element on the stair.","intent":"Review stair and railing properties.","app":"Autodesk Revit","details":"Type Properties was opened for the stair before the railing was selected."},{"start_s":15351.758,"end_s":15359.16,"action":"Opened the Stair Calculator to review its slope and rise/depth results, then switched to Type Properties and scrolled through the stair type parameters.","intent":"Check stair calculation results and type settings.","app":"Autodesk Revit","details":"The calculator displayed target slope 2 rise + 1 depth, actual result 1.936, and minimum result 2.018."},{"start_s":15359.16,"end_s":15364.566,"action":"Exited the properties dialog and entered Create Stair mode, displaying the stair run as a cyan edit preview in the 3D view.","intent":"Return to stair editing and inspect the run geometry.","app":"Autodesk Revit","details":"The stair was shown in Modify | Create Stair mode."},{"start_s":15364.566,"end_s":15368.863,"action":"Opened the material browser for the monolithic run and selected the Concrete, Cast-in-Place gray material to inspect its appearance settings.","intent":"Review the stair run material.","app":"Autodesk Revit","details":"The material browser showed the selected concrete material and its appearance properties."},{"start_s":15368.863,"end_s":15379.159,"action":"Closed the material browser and navigated the 3D stair edit view, using zoom/pan gestures and selecting the stair and railing geometry.","intent":"Inspect the edited stair and railing arrangement in 3D.","app":"Autodesk Revit","details":"The stair and railing were highlighted cyan in the 3D view; the GL floor plan was opened near the end."},{"start_s":15379.159,"end_s":15388.698,"action":"Scrolled and navigated the Revit GL floor plan, moving the view between the elevator and stair areas while cancelling transient selections or commands.","intent":"Inspect the floor plan around the stairs and elevators.","app":"Autodesk Revit","details":"GL floor plan remained open; the view ended centered on the lobby, stair, and Good's Lift area."},{"start_s":15388.698,"end_s":15398.647,"action":"Scrolled and panned across the GL floor plan, then entered stair creation mode and selected the stair region.","intent":"Prepare to create or edit a stair in the floor plan.","app":"Autodesk Revit","details":"The ribbon changed to Modify | Create Stair, and the stair geometry was visible near the lifts."},{"start_s":15398.647,"end_s":15408.882,"action":"Worked in Create Stair mode, clicking stair controls and starting a sketch run; zoomed and panned toward the stair and selected a stair boundary endpoint.","intent":"Define the stair run geometry.","app":"Autodesk Revit","details":"Revit showed Modify | Create Stair and then Modify | Create Stair > Sketch Run with Boundary and Riser tools."},{"start_s":15408.882,"end_s":15418.104,"action":"Continued sketching the stair run by clicking along the stair area and nearby boundaries, zooming in, and cancelling or restarting transient sketch actions.","intent":"Adjust the stair sketch boundaries and run placement.","app":"Autodesk Revit","details":"A close-up showed the stair run, lift openings, temporary dimensions, and an active sketch line."},{"start_s":15418.104,"end_s":15428.104,"action":"Selected and adjusted a stair sketch boundary line, dragging its endpoint and repeatedly cancelling or reselecting while refining its length and position.","intent":"Refine the stair boundary geometry.","app":"Autodesk Revit","details":"The selected horizontal boundary displayed dimensions of approximately 9.791 feet and later 0.470 feet during endpoint adjustment."},{"start_s":15428.104,"end_s":15438.283,"action":"Continued editing the stair sketch boundary, selecting model lines and adjusting the horizontal run line; then returned to the broader stair view with the stair run selected.","intent":"Complete or verify the stair sketch geometry.","app":"Autodesk Revit","details":"The sketch displayed boundary dimensions and highlighted model lines before returning to the stair run view in Create Stair mode."},{"start_s":15438.283,"end_s":15447.923,"action":"Adjusted the Revit floor-plan view with clicks, scroll gestures, and drags while remaining in stair sketch mode; dismissed transient interactions with Escape and repositioned the view.","intent":"Refine the visible stair-run sketch view.","app":"Autodesk Revit","details":"Floor Plan: GL remained open with a highlighted stair run and stair-path annotations."},{"start_s":15447.923,"end_s":15458.675,"action":"Continued clicking and pressing Escape around the stair sketch, then moved to the upper interface area while the Revit view remained visually unchanged.","intent":"Navigate or exit the active stair-sketch interaction.","app":"Autodesk Revit","details":"The status remained in Modify | Create Stair | Sketch Run during the interval."},{"start_s":15458.675,"end_s":15468.712,"action":"Activated Revit’s discard confirmation, selected Yes to discard the stair-run sketch, and returned to the floor plan; clicked in the plan to begin another stair-sketch interaction.","intent":"Discard the current stair sketch and restart or reposition stair-run editing.","app":"Autodesk Revit","details":"A Sketch Discarded dialog explicitly asked whether to discard Runs; the later view showed the stair sketch mode active again."},{"start_s":15468.712,"end_s":15478.209,"action":"Clicked through the stair sketch and plan, adjusted the view, and selected a vertical sketch element near the upper-right portion of the run.","intent":"Position and inspect the stair-run sketch geometry.","app":"Autodesk Revit","details":"The floor plan remained in Create Stair | Sketch Run mode; the final view showed a cyan-highlighted vertical element."},{"start_s":15478.209,"end_s":15488.526,"action":"Clicked several points along the stair sketch, pressed Escape between attempts, and created or adjusted curved sketch geometry across the run area.","intent":"Draw or refine stair-run sketch lines.","app":"Autodesk Revit","details":"Curved temporary/sketch lines and magenta control markers were visible over the stair plan."},{"start_s":15488.526,"end_s":15498.606,"action":"Zoomed and panned the floor plan toward the right side of the stair run, clicked sketch locations, and used middle-button navigation while keeping the stair sketch active.","intent":"Navigate and continue editing the stair-run sketch at a closer scale.","app":"Autodesk Revit","details":"The final view was tightly zoomed on the highlighted horizontal stair-run element and adjacent vertical lines."},{"start_s":15498.606,"end_s":15509.155,"action":"Adjusted the stair-riser sketch in Revit by selecting points and cancelling intermediate inputs, then began positioning another riser start point.","intent":"Continue laying out stair risers in the floor-plan sketch.","app":"Autodesk Revit","details":"Modify | Create Stair > Sketch Run remained active."},{"start_s":15509.155,"end_s":15519.574,"action":"Selected and dragged sketch geometry, repositioned the view, and placed another stair-riser segment; the view ended with the run boundary selected and the start-point prompt active.","intent":"Extend the stair run with additional risers.","app":"Autodesk Revit","details":"The stair sketch showed a new riser and temporary dimensions."},{"start_s":15519.574,"end_s":15529.147,"action":"Dragged and navigated the stair sketch, then placed additional riser geometry; Revit reported 11 risers created with 7 remaining.","intent":"Continue creating the remaining stair risers.","app":"Autodesk Revit","details":"The status text visibly indicated 11 RISERS CREATED, 7 REMAINING."},{"start_s":15529.147,"end_s":15538.657,"action":"Placed and adjusted more riser lines while panning the plan; Revit updated the stair progress from 13 risers created with 5 remaining to 14 created with 4 remaining.","intent":"Advance the stair-run layout by adding risers.","app":"Autodesk Revit","details":"Temporary dimensions and curved stair geometry remained visible."},{"start_s":15538.657,"end_s":15548.501,"action":"Navigated across the stair sketch and selected a vertical riser line, entering another endpoint and cancelling several intermediate inputs.","intent":"Position and refine the next stair riser.","app":"Autodesk Revit","details":"The selected riser displayed a length of about 5.071 feet."},{"start_s":15548.501,"end_s":15558.395,"action":"Scrolled and panned the zoomed floor plan, then clicked around the stair sketch to position or inspect vertical riser geometry without visibly completing the sketch.","intent":"Continue navigating and refining the stair-riser layout.","app":"Autodesk Revit","details":"Modify | Create Stair > Sketch Run remained active; no completion or save action was shown."},{"start_s":15558.395,"end_s":15569.017,"action":"Adjusted the stair sketch view with repeated clicks, drags, and cancellations while working around the stair run geometry.","intent":"Refine or inspect the stair sketch geometry.","app":"Autodesk Revit","details":"Create Stair > Sketch Run mode remained active."},{"start_s":15569.017,"end_s":15578.66,"action":"Scrolled and navigated across the stair sketch, selecting or manipulating a long stair boundary/riser line near the Up annotation.","intent":"Continue editing the stair run sketch.","app":"Autodesk Revit","details":"The view remained zoomed into the stair plan and showed the selected green boundary line."},{"start_s":15578.66,"end_s":15588.257,"action":"Selected and adjusted a vertical stair sketch line, then zoomed or panned out to review the stair geometry and directional annotations.","intent":"Position and review the stair riser or boundary geometry.","app":"Autodesk Revit","details":"A cyan selected line and the Up/Dn annotations were visible; Sketch Run mode remained active."},{"start_s":15588.257,"end_s":15606.491,"action":"Continued editing and reviewing the stair sketch with clicks, panning, and view adjustments, then completed the sketch so the stair appeared as a stair element in the floor plan.","intent":"Finish the stair sketch and return to the stair element.","app":"Autodesk Revit","details":"The final frame showed Modify | Create Stair with the stair selected and calculated run dimensions."},{"start_s":15606.491,"end_s":15616.672,"action":"Dismissed or reviewed the stair warning, switched from the floor plan to the 3D view, and zoomed or navigated around the model to inspect the stair.","intent":"Review the completed stair in the 3D model after a warning.","app":"Autodesk Revit","details":"The warning stated that the stair top elevation could not reach the top elevation; the 3D view then showed the stair selected within the building."},{"start_s":15616.672,"end_s":15629.372,"action":"Navigated and zoomed the 3D model, then selected a floor or balcony slab near the building exterior for inspection.","intent":"Inspect surrounding model geometry in 3D.","app":"Autodesk Revit","details":"The view ended with a floor named WIDE BALACONY selected and highlighted in cyan."},{"start_s":15629.372,"end_s":15638.625,"action":"Opened the WIDE BALCONY floor type assembly and material browser, inspected the wood texture appearance, adjusted a texture setting, and entered 4' before confirming the dialog.","intent":"Modify and review the WIDE BALCONY floor material and assembly properties.","app":"Autodesk Revit","details":"Material Browser showed WIDE BALCONY with image WIDE BALCONY.jpg."},{"start_s":15638.625,"end_s":15648.676,"action":"Closed the material and assembly dialogs, returned to the 3D view, and zoomed or navigated around the selected WIDE BALCONY floor.","intent":"Apply the material review and inspect the floor in the model.","app":"Autodesk Revit","details":"The 3D view displayed the wood-textured balcony floor within the building model."},{"start_s":15648.676,"end_s":15658.577,"action":"Used middle-button navigation and scrolling to zoom out and orbit across the 3D building model, moving from a close floor view to a broader building overview.","intent":"Inspect the applied floor appearance in the overall model.","app":"Autodesk Revit","details":"The view progressed from a local floor area to a distant overview of the building layout."},{"start_s":15658.577,"end_s":15668.629,"action":"Continued orbiting, panning, and zooming the 3D view to inspect the building from several exterior angles.","intent":"Review the model geometry and visible finishes from different viewpoints.","app":"Autodesk Revit","details":"The model remained in the 3D view while the camera moved around the building."},{"start_s":15668.629,"end_s":15688.322,"action":"Switched from the 3D view to the GL floor plan, then zoomed and panned across the furnished plan toward individual apartment rooms.","intent":"Inspect the floor plan layout and room details.","app":"Autodesk Revit","details":"The GL plan showed apartment layouts, furnishings, stairs, and labeled rooms."},{"start_s":15688.322,"end_s":15703.983,"action":"Switched to the recorder window, navigated and scrolled through its displayed content, then returned to Revit and selected a BEDROOM floor element in the 3D view.","intent":"Review the external window and resume model inspection.","app":"Screen recorder; Autodesk Revit","details":"The final Revit view showed a selected BEDROOM floor with turquoise-highlighted floor regions."},{"start_s":15703.983,"end_s":15721.895,"action":"Opened the material browser from Edit Assembly, created or selected a new material, and renamed it TOILET.","intent":"Create and name a material for the floor assembly.","app":"Autodesk Revit","details":"The material browser shows TOILET selected with the Appearance tab active."},{"start_s":15721.895,"end_s":15726.02,"action":"Opened the Select File dialog from the material Appearance image control and browsed the Downloads folder, selecting BEDROOM.jpg.","intent":"Choose an image texture for the TOILET material.","app":"Autodesk Revit","details":"The file dialog lists JPG assets in Downloads, with BEDROOM.jpg selected."},{"start_s":15726.02,"end_s":15731.605,"action":"Opened the Texture Editor for the selected image, changed the sample size from 1.00 to 3.00, and clicked Done.","intent":"Adjust the texture scale for the material appearance.","app":"Autodesk Revit","details":"The Texture Editor displays BATHROOM (2).jpg with width and height updated to 3.00 feet."},{"start_s":15731.605,"end_s":15741.808,"action":"Closed the texture and material dialogs, returned through Type Properties to the 3D view, and reviewed the floor assembly and model.","intent":"Apply the material appearance changes and inspect the resulting model.","app":"Autodesk Revit","details":"The 3D view shows the selected floor elements in the building model."},{"start_s":15741.808,"end_s":15754.379,"action":"Navigated and zoomed the 3D view, then selected a floor element; the view ended with DRAWING FLOORING shown in the Properties panel.","intent":"Inspect another floor element in the model.","app":"Autodesk Revit","details":"The selected floor is labeled DRAWING FLOORING and related warnings are visible."},{"start_s":15754.379,"end_s":15763.743,"action":"Opened Edit Assembly for DRAWING FLOORING, opened its material browser, and opened the create-material menu while entering HALL in the material search.","intent":"Create or locate a material for the drawing flooring assembly.","app":"Autodesk Revit","details":"Edit Assembly lists Wood Sheathing, Chipboard as the finish material; the material browser shows the create-material menu."},{"start_s":15763.743,"end_s":15771.06,"action":"Opened the material texture editor from the Revit Material Browser, adjusted the image scale, entered 3' in the size field, and returned to the material browser.","intent":"Adjust the scale of the material image texture.","app":"Autodesk Revit","details":"The texture preview displayed the HALL (2).jpg image at 3.00 by 3.00 after editing."},{"start_s":15771.06,"end_s":15783.573,"action":"Closed the texture and material dialogs, returned to the Revit model, and opened Type Properties while navigating and scrolling through the dialog.","intent":"Review the selected floor assembly and its type properties.","app":"Autodesk Revit","details":"The 3D view showed the building model with a floor selected before Type Properties became active."},{"start_s":15783.573,"end_s":15791.078,"action":"Opened the Material Browser from Edit Assembly, searched for HALL, selected the HALL material result, and confirmed the selection.","intent":"Assign or review the HALL material for the floor assembly.","app":"Autodesk Revit","details":"The Material Browser changed from Wood Sheathing, Chipboard to Material Browser - HALL and showed HALL selected."},{"start_s":15791.078,"end_s":15797.191,"action":"Returned to Type Properties, reviewed the construction and analytical parameters, closed the dialog, and selected elements in the 3D view.","intent":"Review the updated floor type and return to model selection.","app":"Autodesk Revit","details":"Type Properties displayed the DINING FLOOR type and construction parameters before returning to the model."},{"start_s":15797.191,"end_s":15804.587,"action":"Reopened Edit Assembly and the Material Browser, searched for HALL, selected the HALL result, and confirmed the material dialog.","intent":"Assign or review the HALL material for another floor assembly.","app":"Autodesk Revit","details":"The assembly dialog identified the floor type as KITCHEN; the Material Browser ended on the HALL search result."},{"start_s":15804.587,"end_s":15818.322,"action":"Closed the material and type dialogs, returned to the 3D view, navigated the model, and selected a floor or wall element.","intent":"Finish reviewing the assembly and inspect the model in 3D.","app":"Autodesk Revit","details":"The final 3D view showed the building interior with WIDE UTILITY selected in the Properties panel."},{"start_s":15818.322,"end_s":15830.329,"action":"Opened the Revit Material Browser, duplicated a default material, renamed it “WIDE UTILITY,” and opened the file-selection control for its appearance image.","intent":"Create and name a new floor material while preparing to assign a texture.","app":"Autodesk Revit","details":"The material browser shows WIDE UTILITY selected."},{"start_s":15830.329,"end_s":15837.222,"action":"Opened the Texture Editor for the material image, adjusted the image scale to 3 feet, and clicked Done to return to the Material Browser.","intent":"Configure the texture image dimensions for the WIDE UTILITY material.","app":"Autodesk Revit","details":"The texture editor displays WIDE UTILITY.jpg with 3.00-foot sample size."},{"start_s":15837.222,"end_s":15841.526,"action":"Closed the texture and material dialogs, returned to Edit Assembly, and opened Type Properties for the WIDE UTILITY floor type.","intent":"Apply the material setup and review the floor type properties.","app":"Autodesk Revit","details":"Type Properties shows System Family: Floor and type WIDE UTILITY."},{"start_s":15841.526,"end_s":15851.597,"action":"Reviewed the 3D floor model, navigated around the view, and selected a floor element labeled LOBBY.","intent":"Inspect the updated floor materials in the model and select the lobby floor.","app":"Autodesk Revit","details":"The 3D view shows the textured floor and the selected floor element is LOBBY."},{"start_s":15851.597,"end_s":15866.169,"action":"Opened Edit Assembly and the Material Browser, duplicated a default material, and renamed the new material “LOBBY.”","intent":"Create a separate lobby material for the selected floor assembly.","app":"Autodesk Revit","details":"The Material Browser shows LOBBY selected with no image selected."},{"start_s":15866.169,"end_s":15871.163,"action":"Opened the Select File dialog for the LOBBY material image and selected LOBBY.jpg in the Downloads folder, leaving the dialog open.","intent":"Choose the lobby texture image for the material appearance.","app":"Autodesk Revit","details":"LOBBY.jpg is highlighted and the Open button is available."},{"start_s":15871.163,"end_s":15887.81,"action":"Opened the Material Browser for the LOBBY floor, reviewed its appearance settings, applied the material changes, and returned to the 3D view.","intent":"Update and inspect the LOBBY floor material.","app":"Autodesk Revit","details":"Material Browser showed LOBBY with image LOBBY.jpg; the view returned to the model."},{"start_s":15887.81,"end_s":15895.981,"action":"Opened Type Properties and Edit Assembly, reopened the LOBBY Material Browser and Texture Editor, then adjusted the texture editor settings by entering 3'.","intent":"Modify the LOBBY floor assembly and texture mapping.","app":"Autodesk Revit","details":"Texture Editor displayed LOBBY.jpg with transform controls."},{"start_s":15895.981,"end_s":15900.123,"action":"Applied the LOBBY material settings, returned to Edit Assembly, and opened Type Properties to review the floor type parameters.","intent":"Save the material edits and inspect the floor type.","app":"Autodesk Revit","details":"Type Properties showed the LOBBY floor type and its construction, graphics, material, and analytical parameters."},{"start_s":15900.123,"end_s":15914.491,"action":"Exited the properties dialog with Escape and returned to the 3D model view.","intent":"Close the floor type editing interface.","app":"Autodesk Revit","details":"The LOBBY floor remained selected in the 3D view."},{"start_s":15914.491,"end_s":15925.067,"action":"Navigated the 3D view with middle-button panning and scrolling, selected the OUTDOOR FLOORING floor, then continued navigating and changed to a distant overall view.","intent":"Inspect floor elements in the model.","app":"Autodesk Revit","details":"The selected element was identified as OUTDOOR FLOORING before the view zoomed far out."},{"start_s":15925.067,"end_s":15940.313,"action":"Navigated and zoomed the 3D model around the stair and adjacent rooms, selected the stair, then selected the POOJA ROOM floor.","intent":"Inspect modeled stairs, floors, and rooms.","app":"Autodesk Revit","details":"The final view showed the POOJA ROOM floor selected and a related-warnings indicator visible."},{"start_s":15940.313,"end_s":15950.586,"action":"Opened the floor assembly and material browser, created or selected a new material, and renamed it “POOJA ROOM.”","intent":"Create and name a material for the POOJA ROOM floor assembly.","app":"Autodesk Revit","details":"The Edit Assembly dialog shows the floor type POOJA ROOM and its layer structure."},{"start_s":15950.586,"end_s":15962.442,"action":"Opened the file picker from the material appearance settings and selected the POOJA JPG file in Downloads.","intent":"Choose an image texture for the material.","app":"Autodesk Revit","details":"The Select File dialog lists POOJA as a JPG file and populates the file name field."},{"start_s":15962.442,"end_s":15968.928,"action":"Applied the selected image texture, opened the Texture Editor, adjusted the texture scale, and entered 3 feet before confirming the edit.","intent":"Configure the selected image texture’s scale for the material.","app":"Autodesk Revit","details":"The material appearance displays POJA FLOORING.jpg and the Texture Editor shows scale controls."},{"start_s":15968.928,"end_s":15982.495,"action":"Confirmed the material appearance and assembly edits, returned to the 3D Revit view, and zoomed out to review the floor model.","intent":"Apply the material changes and review their effect in the model.","app":"Autodesk Revit","details":"The 3D view changes from a close-up to a broad view of the building layout."},{"start_s":15982.495,"end_s":15986.721,"action":"Returned to the Revit 3D view, navigated and zoomed the model, then selected an outdoor floor element.","intent":"Inspect and select the outdoor flooring in the model.","app":"Autodesk Revit","details":"The selected element is a floor with type OUTDOOR FLOORING, shown in the Properties panel."},{"start_s":15986.721,"end_s":15999.079,"action":"Opened Type Properties for OUTDOOR FLOORING, entered the assembly editor and material browser, created or selected a new material, and renamed it “OUTDOOR FLOORING.”","intent":"Create and name a material for the outdoor flooring assembly.","app":"Autodesk Revit","details":"The material browser is open for the OUTDOOR FLOORING type, with Default New Material selected."},{"start_s":15999.079,"end_s":16009.066,"action":"Selected a downloaded image file for the OUTDOOR FLOORING material, opened the Texture Editor, adjusted the texture transform, entered 3', and confirmed the edit.","intent":"Configure the appearance texture and scale for the outdoor flooring material.","app":"Autodesk Revit","details":"The texture source shown was OUTDOOR (2).jpg."},{"start_s":16009.066,"end_s":16013.689,"action":"Applied the material appearance changes, opened Type Properties for the OUTDOOR FLOORING floor type, and reviewed the floor parameters.","intent":"Review and continue editing the floor type after updating its material.","app":"Autodesk Revit","details":"Type Properties displayed System Family: Floor and type OUTDOOR FLOORING."},{"start_s":16013.689,"end_s":16019.763,"action":"Closed the properties dialog, navigated the 3D view with middle-clicks and scrolling, and selected a floor element near a balcony area.","intent":"Inspect the modeled floor and locate another element for editing.","app":"Autodesk Revit","details":"The 3D view showed the building interior and the selected element was identified as WIDE BALCONY : R5."},{"start_s":16019.763,"end_s":16027.671,"action":"Opened Type Properties for the LIVING AREA floor, entered its assembly editor, opened the Material Browser, and searched for HALL.","intent":"Change or inspect the material used by the living-area floor assembly.","app":"Autodesk Revit","details":"The Material Browser title changed to Material Browser - HALL."},{"start_s":16027.671,"end_s":16037.772,"action":"Confirmed the LIVING AREA type dialogs, returned to the 3D view, and navigated with middle-clicks and scrolling to inspect the model from an overhead angle.","intent":"Apply the floor assembly change and inspect the resulting model view.","app":"Autodesk Revit","details":"The 3D view changed to an overhead view showing multiple rooms and floor surfaces."},{"start_s":16037.772,"end_s":16052.17,"action":"Opened Type Properties for the ELECTRICAL ROOM floor, entered the assembly editor and Material Browser, and searched for LOBBY.","intent":"Change or inspect the material used by the electrical-room floor assembly.","app":"Autodesk Revit","details":"The Material Browser search was edited to LOBBY, and the title changed to Material Browser - LOBBY."},{"start_s":16052.17,"end_s":16065.217,"action":"Closed the Type Properties dialog for the ELECTRICAL ROOM floor type, returned to the 3D view, and navigated the model with clicks and scrolls.","intent":"Review the floor type and return to the model view.","app":"Autodesk Revit","details":"Type Properties showed System Family: Floor, type ELECTRICAL ROOM."},{"start_s":16065.217,"end_s":16073.083,"action":"Opened Type Properties for the SHAFT floor type, entered Edit Assembly, and opened the Material Browser for a default new material. Selected the material appearance controls and typed “SHAFT” into a field.","intent":"Edit the SHAFT floor assembly and configure its material.","app":"Autodesk Revit","details":"Material Browser displayed Default New Material and the Appearance tab."},{"start_s":16073.083,"end_s":16081.637,"action":"Opened the file picker from the material appearance settings, returned to the Material Browser, and opened the Texture Editor. Loaded SHАFT.jpg and changed the sample size to 3 feet by 3 feet.","intent":"Assign and size a texture for the shaft material.","app":"Autodesk Revit","details":"Texture Editor showed source SHAFT.jpg and 3.00-foot width and height."},{"start_s":16081.637,"end_s":16092.201,"action":"Confirmed the texture and material dialogs, closed Type Properties, and returned to the 3D view. Scrolled and clicked through the model while reviewing the updated floor elements.","intent":"Apply the material edit and inspect the model.","app":"Autodesk Revit","details":"The 3D view showed the SHAFT floor type selected before navigation."},{"start_s":16092.201,"end_s":16103.024,"action":"Navigated and zoomed the 3D view, pressing Escape to clear selections and clicking different floor elements. Selected floors including STAIR CASE FLOOR and LIFT FLOORING 2, then edited a value field and canceled the entry.","intent":"Inspect and select related floor elements in the model.","app":"Autodesk Revit","details":"The view changed from a broad floor layout to a closer view of selected floor regions."},{"start_s":16103.024,"end_s":16113.168,"action":"Selected LIFT FLOORING 1, entered Edit Boundary mode, and zoomed into the floor boundary. Drew or adjusted a rectangular boundary segment around the interior floor area.","intent":"Modify the boundary of the LIFT FLOORING 1 floor.","app":"Autodesk Revit","details":"Edit Boundary tools were active, and the final view showed a magenta rectangular sketch boundary with a temporary dimension."},{"start_s":16113.168,"end_s":16130.473,"action":"Edited floor boundaries in the Revit 3D view, then selected the stair-case floor and repositioned the view to inspect it.","intent":"Modify and inspect floor geometry.","app":"Autodesk Revit","details":"The selected floor changed from LIFT FLOORING 1 to STAIR CASE FLOOR."},{"start_s":16130.473,"end_s":16140.62,"action":"Opened Type Properties and Edit Assembly for STAIR CASE FLOOR, opened the Material Browser, and selected a default material while entering the name STAIRCASE.","intent":"Configure the stair-case floor assembly and material.","app":"Autodesk Revit","details":"The Material Browser showed Default New Material with a context menu open."},{"start_s":16140.62,"end_s":16144.953,"action":"Opened the file picker from the material browser and selected the STAIR.jpg image in Downloads.","intent":"Assign a stair image texture to the material.","app":"Autodesk Revit","details":"STAIR.jpg was highlighted and populated in the file name field."},{"start_s":16144.953,"end_s":16150.232,"action":"Opened the Texture Editor for STAIR.jpg, changed the linked sample size from 1.00 feet to 3.00 feet, and returned toward the Material Browser.","intent":"Adjust the scale of the assigned stair texture.","app":"Autodesk Revit","details":"The texture preview and both linked scale fields displayed 3.00 feet."},{"start_s":16150.232,"end_s":16160.635,"action":"Closed the material and assembly dialogs and returned to the 3D view, leaving the stair-case floor selected.","intent":"Apply or review the floor material changes in the model.","app":"Autodesk Revit","details":"The 3D view showed the selected stair-case floor and adjacent railing."},{"start_s":16160.635,"end_s":16164.772,"action":"Opened Type Properties and Edit Assembly for LIFT FLOORING 1, then opened the Material Browser for its Wood Sheathing, Chipboard material.","intent":"Inspect or edit the lift-floor assembly material.","app":"Autodesk Revit","details":"The assembly listed Wood Sheathing, Chipboard as the finish material."},{"start_s":16164.772,"end_s":16170.905,"action":"Opened the Material Browser for a new material and renamed the selected material to “LIFT OUT,” then initiated image selection.","intent":"Create and name a material for the floor assembly and assign an image asset.","app":"Autodesk Revit","details":"The material remained in the Appearance tab and a Select File dialog opened."},{"start_s":16170.905,"end_s":16179.653,"action":"Opened the Texture Editor, selected the image source, adjusted the image scale to 3 feet by 3 feet, and returned to the Material Browser.","intent":"Configure the texture image dimensions for the LIFT OUT material.","app":"Autodesk Revit","details":"The Texture Editor displayed the loaded LIFT OUT.jpg image with 3.00-foot width and height."},{"start_s":16179.653,"end_s":16185.353,"action":"Confirmed the material and assembly dialogs, opened Type Properties for the floor type, and returned to the 3D view with the floor selected.","intent":"Apply the edited material and inspect the resulting floor type in the project.","app":"Autodesk Revit","details":"The 3D view showed the selected floor with the updated light textured surface."},{"start_s":16185.353,"end_s":16193.535,"action":"Reopened Edit Assembly and the Material Browser, created a new material, and renamed it to “LIFT IN,” then initiated image selection.","intent":"Create a second named material for the floor assembly and assign an image asset.","app":"Autodesk Revit","details":"The Material Browser changed from Wood Sheathing, Chipboard to Default New Material, and a Select File dialog opened."},{"start_s":16193.535,"end_s":16198.225,"action":"Selected LIFT IN.jpg from the Downloads file list and loaded it into the LIFT IN material’s Appearance image field.","intent":"Assign the LIFT IN image asset to the newly created material.","app":"Autodesk Revit","details":"The Material Browser showed LIFT IN with LIFT IN.jpg assigned."},{"start_s":16198.225,"end_s":16202.409,"action":"Opened the Texture Editor for LIFT IN.jpg, changed the linked sample size from 1.00 to 3.00 feet, and completed the edit.","intent":"Set the texture scale for the LIFT IN material image.","app":"Autodesk Revit","details":"The Texture Editor displayed 3.00-foot width and height with the image preview updated."},{"start_s":16202.409,"end_s":16206.59,"action":"Opened the floor assembly editor for type LIFT FLOORING 2, then switched to Type Properties and reviewed the construction parameters before returning to the model.","intent":"Review the selected floor type’s layer construction and parameters.","app":"Autodesk Revit","details":"Edit Assembly showed finish, core boundary, structural, and material layers; Type Properties showed System Family: Floor and type LIFT FLOORING 2."},{"start_s":16206.59,"end_s":16211.411,"action":"Closed the properties dialogs and returned to the 3D view, leaving a floor element selected in the plan-like top view.","intent":"Return to the model and continue floor editing or inspection.","app":"Autodesk Revit","details":"The selected floor was identified as LIFT FLOORING 2 on level GL."},{"start_s":16211.411,"end_s":16219.246,"action":"Navigated and zoomed/panned across the 3D top view, selecting floor elements including LIFT FLOORING 1 and then a lobby floor area.","intent":"Inspect or select different floor regions in the model.","app":"Autodesk Revit","details":"The view ended with LIFT FLOORING 1 selected; the model remained in floor modification context."},{"start_s":16219.246,"end_s":16233.972,"action":"Selected additional floor regions, adjusted the view, and entered Edit Boundary mode for LIFT FLOORING 2, displaying its rectangular boundary sketch.","intent":"Edit the boundary of the selected floor element.","app":"Autodesk Revit","details":"The floor selection changed during inspection; the final view showed a magenta rectangular boundary and Edit Boundary tools."},{"start_s":16233.972,"end_s":16244.134,"action":"Worked in Edit Boundary mode, changing the visible floor boundary geometry and confirming an edit attempt; Revit displayed a warning that highlighted floors overlap.","intent":"Modify the floor boundary while addressing model overlap feedback.","app":"Autodesk Revit","details":"A warning panel stated: “Highlighted floors overlap.”"},{"start_s":16244.134,"end_s":16257.66,"action":"Exited the boundary-edit interaction, zoomed and panned across the overall floor plan, selected several floor regions, and ended by opening Type Properties for a floor type.","intent":"Inspect floor layouts and access type-level settings.","app":"Autodesk Revit","details":"The view showed multiple floor areas; the final application window was Type Properties."},{"start_s":16257.66,"end_s":16264.731,"action":"Opened the Revit Material Browser from Edit Assembly, searched for “HALL,” selected the HALL material, and confirmed the dialog.","intent":"Find and choose the HALL material for the assembly.","app":"Autodesk Revit","details":"Material Browser changed from Wood Sheathing, Chipboard to Material Browser - HALL."},{"start_s":16264.731,"end_s":16274.746,"action":"Confirmed the material dialog, returned to the Revit 3D view, and scrolled and adjusted the view while reviewing floor elements.","intent":"Apply the material selection and inspect the model.","app":"Autodesk Revit","details":"The 3D view displayed floor-plan geometry with selected floor elements."},{"start_s":16274.746,"end_s":16284.834,"action":"Scrolled and navigated the Revit view, then switched from the 3D view to the GL floor plan and continued adjusting the view.","intent":"Review the building layout in the GL floor plan.","app":"Autodesk Revit","details":"The active view changed to Floor Plan: GL, showing a furnished floor-plan layout."},{"start_s":16284.834,"end_s":16295.264,"action":"Panned and zoomed around the GL floor plan to inspect different rooms, lobbies, and apartment layouts.","intent":"Review floor-plan details and spatial arrangement.","app":"Autodesk Revit","details":"The floor plan was repositioned and displayed at multiple zoom levels."},{"start_s":16295.264,"end_s":16304.684,"action":"Continued panning and zooming across the GL floor plan, then switched back to the Revit 3D view.","intent":"Finish reviewing the floor plan and return to the model view.","app":"Autodesk Revit","details":"The title changed to the 3D View, which showed a close-up of walls and doors."},{"start_s":16304.684,"end_s":16319.051,"action":"Scrolled and navigated the 3D view, then selected a stair element, leaving the model in Modify | Stairs mode.","intent":"Inspect and select the stair component in the model.","app":"Autodesk Revit","details":"The selected stair’s properties showed base level GL and top level FFL."},{"start_s":16319.051,"end_s":16326.249,"action":"Reviewed the cast-in-place stair type properties, closed the dialog, and returned to the 3D view with the stair selected.","intent":"Inspect the stair type and return to the model.","app":"Autodesk Revit","details":"Type Properties showed System Family: Cast-In-Place Stair, type Insitu_Concrete_150mm_Waist."},{"start_s":16326.249,"end_s":16336.007,"action":"Opened the monolithic run type properties, opened the Material Browser for the concrete material, searched for “STAIR,” selected the STAIRCASE material, and confirmed the selection.","intent":"Choose a staircase material for the stair run.","app":"Autodesk Revit","details":"The Material Browser title changed to Material Browser - STAIRCASE before it was closed."},{"start_s":16336.007,"end_s":16344.322,"action":"Reopened the material selector, searched for “STAIR,” selected STAIRCASE, and returned to the type properties where Monolithic Material displayed STAIRCASE.","intent":"Assign STAIRCASE as the monolithic stair material.","app":"Autodesk Revit","details":"Type Properties visibly showed Monolithic Material set to STAIRCASE."},{"start_s":16344.322,"end_s":16355.087,"action":"Applied the stair material changes, exited the type properties and stair-edit context, then navigated the 3D view by orbiting and zooming around the model.","intent":"Commit the material assignment and inspect the stair in the model.","app":"Autodesk Revit","details":"The 3D view showed the selected stair within the building, followed by a wider model view."},{"start_s":16355.087,"end_s":16365.658,"action":"Continued navigating the 3D view with repeated zooming and orbiting, moving from a close stair view to a distant overview of the building.","intent":"Inspect the overall model after editing the stair.","app":"Autodesk Revit","details":"The final evidence showed the building reduced to a small overall view."},{"start_s":16365.658,"end_s":16374.812,"action":"Orbited and zoomed the 3D view back toward the building, ending on a closer overview of the rooms, walls, doors, windows, and stair openings.","intent":"Reposition the 3D camera for model inspection.","app":"Autodesk Revit","details":"No new model edits were visible; the interval consisted of view navigation."},{"start_s":16374.812,"end_s":16392.56,"action":"Navigated within the Revit floor plan using clicks and scrolling, then switched from the GL floor plan to the 3D view.","intent":"Inspect the project layout in plan and 3D views.","app":"Autodesk Revit","details":"Displayed the PROJECT 11 GL floor plan before switching to 3D View: {3D}."},{"start_s":16392.56,"end_s":16402.666,"action":"Continued in Revit 3D View and used middle-button navigation and scrolling to orbit and reposition the building model.","intent":"Examine the building model from different 3D viewpoints.","app":"Autodesk Revit","details":"The view changed from a closer exterior perspective to another angled view of the modeled rooms and walls."},{"start_s":16402.666,"end_s":16413.433,"action":"Navigated further through the 3D model with middle-button movements and extensive scrolling, zooming from a building view into a close-up and then back to a wider view.","intent":"Inspect interior geometry and circulation areas in the 3D model.","app":"Autodesk Revit","details":"A floor element or corridor was visibly highlighted in blue in the wider view."},{"start_s":16413.433,"end_s":16422.417,"action":"Continued orbiting and zooming the 3D model with middle-button navigation and scrolling, moving from a wider corridor view to a close-up of rooms and floors.","intent":"Review detailed model geometry around rooms and circulation spaces.","app":"Autodesk Revit","details":"The selected floor or corridor remained outlined in blue during the navigation."},{"start_s":16422.417,"end_s":16432.5,"action":"Zoomed far out to view the overall building, then navigated and zoomed back toward another section of the 3D model.","intent":"Compare the overall building layout with a closer regional view.","app":"Autodesk Revit","details":"The model briefly appeared very small in the canvas before returning to a closer angled view."},{"start_s":16432.5,"end_s":16443.625,"action":"Selected a floor area in the 3D model, navigated with scrolling, pressed Escape twice, and continued zooming to a wider building view.","intent":"Inspect and then clear or exit the current model selection while reviewing the overall layout.","app":"Autodesk Revit","details":"The selected outdoor flooring appeared filled cyan before the view was zoomed out."},{"start_s":16443.625,"end_s":16452.687,"action":"Returned to the Revit GL floor plan, then adjusted the view with middle-click navigation and scrolling while keeping the full first-floor layout visible.","intent":"Review the GL floor plan layout.","app":"Autodesk Revit","details":"Displayed the PROJECT 11 Floor Plan: GL view."},{"start_s":16452.687,"end_s":16461.594,"action":"Navigated and zoomed into the GL floor plan, bringing the lobby, staircases, and multiple lifts into close view.","intent":"Inspect central circulation elements in the floor plan.","app":"Autodesk Revit","details":"The close view showed the lobby and four lift spaces."},{"start_s":16461.594,"end_s":16480.278,"action":"Switched from the GL floor plan to the {3D} view, manipulated the model orientation and zoom extensively, and ended with a top-oriented view of the building model.","intent":"Review the architectural model in 3D.","app":"Autodesk Revit","details":"Changed to Autodesk Revit 3D View: {3D} and navigated the model."},{"start_s":16480.278,"end_s":16484.487,"action":"Opened the Load Autodesk Family window, then closed or dismissed it and returned to the Revit 3D view.","intent":"Access the family-loading command without completing a load.","app":"Autodesk Revit","details":"The family window appeared blank before returning to the model."},{"start_s":16484.487,"end_s":16488.819,"action":"Switched to the recorder window and interacted with the Windows Wi-Fi panel; the selected network reported that it could not connect, then switched to Windows Explorer.","intent":"Check network connectivity while the recording task remains active.","app":"Screen recorder / Windows","details":"The recorder task window remained visible with the recording active; Wi-Fi showed a failed connection."},{"start_s":16488.819,"end_s":16493.146,"action":"Returned to Revit, restored the visible 3D view, and clicked a railing element in the model.","intent":"Resume model review and select an architectural element.","app":"Autodesk Revit","details":"The selected element was identified in the status bar as Railing: 1100mm."},{"start_s":16493.146,"end_s":16498.184,"action":"Closed the Autodesk Family window, returned to the Revit 3D view, and scrolled through the floor layout before switching to Windows Explorer.","intent":"Review the Revit model and then open file browsing.","app":"Autodesk Revit; Windows Explorer","details":null},{"start_s":16498.184,"end_s":16509.14,"action":"Opened Windows Quick Settings, selected Wi‑Fi, and scrolled through the available wireless networks while Revit remained visible behind the panel.","intent":"Inspect available network connections.","app":"Windows ShellHost","details":"Wi‑Fi network list was displayed."},{"start_s":16509.14,"end_s":16525.195,"action":"Selected the “Iqoo Z9s pro 5G” Wi‑Fi network and waited while Windows showed it connecting.","intent":"Connect to the selected wireless network.","app":"Windows ShellHost","details":"The connection remained in progress in the visible evidence."},{"start_s":16525.195,"end_s":16533.884,"action":"Returned to Revit and scrolled and middle-dragged through the 3D floor layout, changing the visible model area and zoom.","intent":"Navigate and inspect different portions of the Revit model.","app":"Autodesk Revit","details":null},{"start_s":16533.884,"end_s":16542.226,"action":"Continued scrolling and middle-click navigation across the Revit 3D view, moving from one floor-plan region to another.","intent":"Review additional areas of the floor layout.","app":"Autodesk Revit","details":null},{"start_s":16542.226,"end_s":16560.081,"action":"Scrolled and navigated across the Revit model while network status changes occurred, then clicked Load Autodesk Family on the ribbon to open the family-loading window.","intent":"Continue model review and begin loading an Autodesk family.","app":"Autodesk Revit","details":"The span ended with the Load Autodesk Family window active."},{"start_s":16560.081,"end_s":16574.038,"action":"Scrolled through the Revit Load Autodesk Family dialog, selected a door family, and clicked Load; Revit displayed the Downloading Families progress dialog at 100%.","intent":"Load a door family into the Revit project.","app":"Autodesk Revit","details":"Door family results were visible in the Autodesk library."},{"start_s":16574.038,"end_s":16582.784,"action":"Navigated the loaded door placement view, resized or repositioned the Revit window, and switched from the 3D view to the GL floor plan while remaining in Modify | Place Door mode.","intent":"Prepare to place the loaded door in the GL floor plan.","app":"Autodesk Revit","details":"The selected type was Doors_Concept_ExtDbl, 1810x2110mm."},{"start_s":16582.784,"end_s":16593.017,"action":"Zoomed into the GL floor plan around the lift lobby and placed a double door between the lifts; the resulting door geometry and temporary dimensions appeared, with a geometry-collision warning shown.","intent":"Place the loaded double door in the lobby area.","app":"Autodesk Revit","details":"The door was placed below the lift openings in the lobby."},{"start_s":16593.017,"end_s":16601.856,"action":"Continued placing doors around the lift lobby, clicking several wall locations and panning or zooming to inspect adjacent lift and lobby areas.","intent":"Add or position additional doors around the lift lobby.","app":"Autodesk Revit","details":"Temporary dimensions and door swing geometry remained visible."},{"start_s":16601.856,"end_s":16613.6,"action":"Panned and zoomed across the floor plan from the lobby toward the kitchen and goods lift, clicked another doorway location, and pressed Escape to end door placement.","intent":"Place a door near the goods lift and exit the placement command.","app":"Autodesk Revit","details":"The final view showed the kitchen, utility area, goods lift, and lobby."},{"start_s":16613.6,"end_s":16623.598,"action":"Pressed Escape repeatedly, switched back to the 3D view, and navigated by zooming and panning through the building model; selected floor and wall geometry became highlighted.","intent":"Inspect the model in 3D after placing doors.","app":"Autodesk Revit","details":"The 3D view ended on brick walls and window or opening geometry."},{"start_s":16623.598,"end_s":16633.522,"action":"Navigated from the 3D model to the GL floor plan, typed into the active interface, and adjusted the view until the floor-plan layout was displayed.","intent":"Switch to and inspect the GL floor plan.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - Floor Plan: GL."},{"start_s":16633.522,"end_s":16644.171,"action":"Zoomed and panned around the GL floor plan, then activated the railing tool and began positioning a railing path along the balcony edge.","intent":"Create or modify a balcony railing.","app":"Autodesk Revit","details":"The interface showed Modify | Create Railing Path with a selected 1100 mm railing."},{"start_s":16644.171,"end_s":16657.651,"action":"Continued drawing the railing path around the curved balcony perimeter, placing successive endpoints and using Escape while refining the path.","intent":"Trace the balcony boundary with a railing.","app":"Autodesk Revit","details":"A magenta railing path followed the balcony curve and remained in the create-path mode."},{"start_s":16657.651,"end_s":16667.536,"action":"Switched back to Revit, opened the railing type list, selected a railing type, and changed to the 3D view; navigated the model while the railing remained selected.","intent":"Review the railing in the model and adjust its type.","app":"Autodesk Revit","details":"The 3D view showed the selected railing around balcony areas."},{"start_s":16667.536,"end_s":16677.678,"action":"Navigated the 3D model with panning and zooming, then returned to the GL floor plan and adjusted the view around the balcony area.","intent":"Review the model and return to the plan for inspection.","app":"Autodesk Revit","details":"The title changed back to PROJECT 11 - Floor Plan: GL."},{"start_s":16677.678,"end_s":16687.442,"action":"Zoomed and panned out across the GL floor plan to inspect multiple apartment layouts and the surrounding block plan.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The final view showed several apartment units and part of the BLOCK-A first-floor plan."},{"start_s":16687.442,"end_s":16697.214,"action":"Navigated around the GL floor plan by zooming and panning, then entered railing-path creation mode near the apartment layout.","intent":"Position the floor plan and begin editing a railing path.","app":"Autodesk Revit","details":"The view remained on the GL floor plan, with the railing path tool active by the end."},{"start_s":16697.214,"end_s":16707.608,"action":"Zoomed into the wide balcony, adjusted the view around its curved perimeter, and attempted railing-path placement before cancelling and resizing the window.","intent":"Inspect and define the railing path along the balcony edge.","app":"Autodesk Revit","details":"The balcony was shown in close-up with a magenta railing-path preview and temporary dimension."},{"start_s":16707.608,"end_s":16717.072,"action":"Clicked around the balcony perimeter and navigated back across the floor plan, leaving railing creation active and selecting an existing railing.","intent":"Continue positioning or editing the balcony railing path.","app":"Autodesk Revit","details":"The view ended zoomed out over the apartment plan with a railing selected."},{"start_s":16717.072,"end_s":16726.72,"action":"Navigated to another curved balcony beside the kitchen, zoomed in, and placed or previewed railing-path segments along its edge.","intent":"Apply the railing-path edit to another balcony edge.","app":"Autodesk Revit","details":"The close-up showed a 5-foot-wide balcony with the railing path highlighted in magenta."},{"start_s":16726.72,"end_s":16736.966,"action":"Continued placing and adjusting the railing path around the curved balcony, then exited the edit context and navigated to another apartment area.","intent":"Complete or review the balcony railing modification.","app":"Autodesk Revit","details":"The railing path was highlighted along the balcony curve before the view changed to another floor-plan region."},{"start_s":16736.966,"end_s":16747.415,"action":"Panned and zoomed across the GL floor plan, then entered railing-path creation near a 5-foot-6-inch-wide balcony and positioned the view on that balcony.","intent":"Continue railing-path work on another balcony.","app":"Autodesk Revit","details":"The final view centered on the 5-foot-6-inch-wide balcony above the living room."},{"start_s":16747.415,"end_s":16762.116,"action":"Edited the railing path around the balcony in Revit, then dismissed transient prompts and a WhatsApp notification overlay.","intent":"Continue modifying the balcony railing path.","app":"Autodesk Revit","details":"Revit remained in Modify | Create Railing Path mode; a WhatsApp notification was visible briefly."},{"start_s":16762.116,"end_s":16771.652,"action":"Returned focus to Revit, selected the balcony boundary, and adjusted the view to inspect the railing path around the corner.","intent":"Inspect and continue editing the balcony railing boundary.","app":"Autodesk Revit","details":"The selected balcony edge and railing path were visible in the GL floor plan."},{"start_s":16771.652,"end_s":16781.682,"action":"Zoomed into the balcony corner and edited the railing segment along the curved edge, leaving the segment highlighted in the plan.","intent":"Refine the railing path around the curved balcony corner.","app":"Autodesk Revit","details":"The railing path was shown in Modify | Create Railing Path mode with a highlighted vertical and curved segment."},{"start_s":16781.682,"end_s":16791.779,"action":"Exited the focused railing edit view, zoomed out across the floor plan, then reselected the balcony railing path near its upper edge.","intent":"Review the railing placement in the broader floor plan and resume path editing.","app":"Autodesk Revit","details":"The view changed from a close balcony corner to a broader apartment floor plan, then back to the balcony."},{"start_s":16791.779,"end_s":16801.577,"action":"Zoomed and panned along the balcony’s upper-left corner, selected the model-line or path geometry, and adjusted the curved railing segment.","intent":"Refine the railing alignment along the balcony perimeter.","app":"Autodesk Revit","details":"The close-up showed a magenta railing path following the balcony corner and horizontal edge."},{"start_s":16801.577,"end_s":16811.46,"action":"Panned and zoomed out from the balcony corner, reviewed the selected railing across the apartment plan, and left the railing selected in the GL floor plan.","intent":"Review the completed balcony railing path in context.","app":"Autodesk Revit","details":"The final view showed the balcony, dining, drawing, kitchen, and bedroom areas with the railing selected."},{"start_s":16811.46,"end_s":16821.487,"action":"Adjusted the Revit view around the balcony corner, clicked and dragged while creating or editing a railing path, and resized the application window.","intent":"Modify the railing layout in the floor plan.","app":"Autodesk Revit","details":"Railing creation/edit mode remained active; the view shifted to another portion of the balcony."},{"start_s":16821.487,"end_s":16830.519,"action":"Clicked and dragged to extend the railing path around the curved corner, canceled an intermediate action, and resized or repositioned the Revit window while continuing the edit.","intent":"Continue shaping the railing path around the balcony corner.","app":"Autodesk Revit","details":"The model showed a magenta path segment with temporary dimensions."},{"start_s":16830.519,"end_s":16846.104,"action":"Scrolled through the view, switched from the floor plan to the 3D view, and continued navigating the model with middle-button view controls.","intent":"Inspect the railing and surrounding building in 3D.","app":"Autodesk Revit","details":"The 3D view opened showing the building and the selected railing."},{"start_s":16846.104,"end_s":16855.579,"action":"Navigated the 3D view with repeated middle-button clicks and scrolling, changing the camera angle and zoom to inspect the building model.","intent":"Review the railing placement in the 3D model.","app":"Autodesk Revit","details":"The camera moved from a broad building view to a different elevated perspective."},{"start_s":16855.579,"end_s":16866.081,"action":"Continued orbiting and zooming the 3D view, selected the balcony railing, and entered 150 in a visible property field before dismissing the edit.","intent":"Inspect and adjust a railing-related property.","app":"Autodesk Revit","details":"The view ended focused on the balcony railing, which was highlighted in cyan."},{"start_s":16866.081,"end_s":16875.745,"action":"Selected railing elements, entered 150MM and confirmed it, then canceled out and navigated the 3D view; the railing display changed from cyan selection highlighting to its normal appearance.","intent":"Set a railing dimension or offset and review the result.","app":"Autodesk Revit","details":"The balcony railing remained visible in the 3D view after the property edit."},{"start_s":16875.745,"end_s":16884.813,"action":"Scrolled through the Revit 3D view, clicked within the model, and briefly hid and restored the application while the window resized.","intent":"Navigate and inspect the 3D building model.","app":"Autodesk Revit","details":"The view remained on a brick-walled building interior."},{"start_s":16884.813,"end_s":16899.547,"action":"Scrolled in the Revit 3D view to adjust the model view and inspect a slightly different framing of the building.","intent":"Review the 3D model from another view.","app":"Autodesk Revit","details":null},{"start_s":16899.547,"end_s":16903.601,"action":"Scrolled further through the 3D view, bringing the right side of the brick building and its interior rooms closer into view.","intent":"Continue inspecting the model geometry.","app":"Autodesk Revit","details":null},{"start_s":16903.601,"end_s":16919.987,"action":"Performed an extended scroll through the 3D view, progressively zooming toward the exterior brick wall, windows, and doorway.","intent":"Examine exterior building elements in closer detail.","app":"Autodesk Revit","details":null},{"start_s":16919.987,"end_s":16928.491,"action":"Continued scrolling while the close-up view remained focused on the brick exterior wall, windows, and recessed doorway.","intent":"Review the selected area of the 3D model.","app":"Autodesk Revit","details":null},{"start_s":16928.491,"end_s":16938.654,"action":"Scrolled and clicked within the 3D view, changed the framing back toward the building interior, briefly moved and resized the Revit window, and pressed Escape while ending with a window selected.","intent":"Navigate and inspect model elements in the Revit 3D view.","app":"Autodesk Revit","details":"The final view shows a blue-highlighted window element on the brick building."},{"start_s":16938.654,"end_s":16948.239,"action":"Navigated and zoomed the Revit GL floor plan, panning across the apartment layout and bringing different rooms and annotations into view.","intent":"Review the floor plan layout.","app":"Autodesk Revit","details":null},{"start_s":16948.239,"end_s":16958.912,"action":"Continued zooming and panning across the GL floor plan, moving from the central building area toward lower units and the floor-area table.","intent":"Inspect additional floor plan regions and tabulated information.","app":"Autodesk Revit","details":null},{"start_s":16958.912,"end_s":16968.909,"action":"Panned and zoomed the floor plan, then switched to the {3D} view; entered a short text sequence while repositioning the Revit window.","intent":"Transition from plan review to 3D model review.","app":"Autodesk Revit","details":"The 3D view displayed the building interior walls and openings."},{"start_s":16968.909,"end_s":16979.026,"action":"Navigated the 3D model with middle-button view movements and selected windows, ending with a closer view of the brick walls and a highlighted window.","intent":"Inspect window elements in the 3D model.","app":"Autodesk Revit","details":"A Windows_Dbl_Plain 8' element was selected and shown in the Properties panel."},{"start_s":16979.026,"end_s":16989.025,"action":"Continued orbiting and zooming around the 3D building model, selecting different wall or window areas and repositioning the view around the exterior.","intent":"Review exterior openings and building geometry.","app":"Autodesk Revit","details":null},{"start_s":16989.025,"end_s":16998.93,"action":"Panned and zoomed the 3D model while selecting another window, then switched back to the GL floor plan and zoomed into the living room, kitchen, utility area, and balcony.","intent":"Return to the floor plan for detailed room inspection.","app":"Autodesk Revit","details":"The final view showed the GL floor plan focused on a furnished living room and kitchen."},{"start_s":16998.93,"end_s":17017.392,"action":"Navigated the Revit floor plan with scrolling and window changes, then activated door placement and selected a door location near the kitchen and balcony.","intent":"Prepare to place a door in the floor plan.","app":"Autodesk Revit","details":"A raster-image floor plan was visible; the final state showed Modify | Place Door with an 1810x2110mm door type."},{"start_s":17017.392,"end_s":17025.894,"action":"Opened Type Properties for the door family, renamed the type to 8', and edited the duplicate type name to 8'.","intent":"Create an 8-foot door type.","app":"Autodesk Revit","details":"Type Properties showed the Doors_Concept_ExtDbl family and updated type name 8'."},{"start_s":17025.894,"end_s":17031.695,"action":"Renamed the door type to 9' through the Name dialog and confirmed the updated type properties.","intent":"Create a 9-foot door type.","app":"Autodesk Revit","details":"The Type Properties dialog showed the type as 9' with width updated to 8.000'."},{"start_s":17031.695,"end_s":17041.967,"action":"Returned to the floor plan, selected the 9' door type, and placed or adjusted doors around the living room and balcony opening while scrolling and panning.","intent":"Place door instances in the living and balcony area.","app":"Autodesk Revit","details":"The plan remained in Modify | Place Door mode and showed door swing geometry near the balcony."},{"start_s":17041.967,"end_s":17052.127,"action":"Selected the 9' door tool, panned and zoomed across the plan, and navigated toward the dining, kitchen, utility, and balcony areas.","intent":"Position the view and door tool for additional placement.","app":"Autodesk Revit","details":"The view moved from the kitchen area to the dining room and wide balcony; no confirmed placement click was visible."},{"start_s":17052.127,"end_s":17061.741,"action":"Selected the 8' door type, panned and zoomed across the dining and bedroom areas, and continued door placement with the plan showing temporary dimensions and a geometry-collision warning.","intent":"Place or inspect an 8-foot door in other floor-plan locations.","app":"Autodesk Revit","details":"The final view showed the upper floor plan with bedrooms, living room, balcony, and the 3BHK 2001 Sft. label."},{"start_s":17061.741,"end_s":17072.195,"action":"Returned to Autodesk Revit, kept the door placement tool active, and zoomed out and panned across the GL floor plan.","intent":"Inspect the floor plan while positioning a door.","app":"Autodesk Revit","details":"The view changed from a close-up of the balcony and bedrooms to a wider plan view; no completed placement is visible."},{"start_s":17072.195,"end_s":17082.415,"action":"Zoomed and panned through the GL floor plan from the balcony and Toilet-1 area toward other apartment layouts while the door placement tool remained active.","intent":"Navigate the plan to locate another door placement area.","app":"Autodesk Revit","details":"The view ended on a wider section showing multiple apartments, bedrooms, toilets, dining, kitchen, and circulation spaces."},{"start_s":17082.415,"end_s":17091.925,"action":"Switched from the floor plan to the 3D view, adjusted the view with navigation gestures, and selected a door visible on the building exterior.","intent":"Inspect the door and building geometry in 3D.","app":"Autodesk Revit","details":"The 3D view changed from a broad building view to a closer exterior view with the selected door highlighted."},{"start_s":17091.925,"end_s":17104.821,"action":"Navigated and zoomed the 3D building view through several orientations and distances, briefly selecting wall geometry before ending on a distant overall model view.","intent":"Review the building model and inspect its exterior elements.","app":"Autodesk Revit","details":"The model was shown at progressively smaller scales; no confirmed geometry edit is visible."},{"start_s":17104.821,"end_s":17114.825,"action":"Briefly switched through Windows Explorer and the recorder and then returned to Revit, zooming the 3D model before switching back to the GL floor plan.","intent":"Return to the floor plan after reviewing the model.","app":"Autodesk Revit","details":"The final view was the GL floor plan showing several apartment units and shared circulation."},{"start_s":17114.825,"end_s":17124.967,"action":"Zoomed and panned across the GL floor plan toward the central lobby, stairs, lifts, electrical room, kitchen, and adjacent apartments.","intent":"Inspect and navigate the building floor plan.","app":"Autodesk Revit","details":"The view ended centered on the lobby and stair/lift core with surrounding rooms visible."},{"start_s":17124.967,"end_s":17140.671,"action":"Adjusted the Revit floor-plan view by scrolling and resizing the window, then exited the active Scale command and switched to the Insert ribbon.","intent":"Navigate and prepare the floor plan for loading or placing a door family.","app":"Autodesk Revit","details":"The view moved from a close-up of the Electrical Room to a wider floor-plan view."},{"start_s":17140.671,"end_s":17153.665,"action":"Opened Load Autodesk Family, browsed door families, and selected a flush door family before initiating the load.","intent":"Load a door family into the Revit project.","app":"Autodesk Revit","details":"The family browser showed door results with Doors_ExtDbl_Flush selected."},{"start_s":17153.665,"end_s":17158.494,"action":"Reviewed the Family Already Exists dialog for Doors_ExtDbl_Flush and chose to overwrite the existing family version, returning to the project view.","intent":"Replace the existing door family with the selected version.","app":"Autodesk Revit","details":"The overwrite option was selected; parameter-value overwrite is not clearly distinguishable."},{"start_s":17158.494,"end_s":17169.53,"action":"Selected the 3-foot Doors_ExtDbl_Flush type, opened Type Properties, changed a type value to 3 feet, and confirmed the dialogs.","intent":"Configure the door type dimensions before placement.","app":"Autodesk Revit","details":"Type Properties displayed family Doors_ExtDbl_Flush with type 3'."},{"start_s":17169.53,"end_s":17179.931,"action":"Scrolled and zoomed toward the Electrical Room, then positioned the 3-foot Doors_ExtDbl_Flush door for placement near the room opening.","intent":"Place the configured door in the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Door mode; the view ended on a close-up with temporary dimensions visible."},{"start_s":17179.931,"end_s":17189.853,"action":"Exited and re-entered placement-related commands while panning and zooming around the Electrical Room and adjacent shafts, leaving the door tool active.","intent":"Refine the view and continue positioning the door.","app":"Autodesk Revit","details":"The final view focused on the Comm. Shaft and Staircase Press. Shaft area with Doors_ExtDbl_Flush 3' selected."},{"start_s":17189.853,"end_s":17195.381,"action":"Switched to Autodesk Revit and continued positioning a door in the GL floor plan near the communication shaft; clicked to place or adjust the door, then triggered a warning.","intent":"Place a door in the floor plan.","app":"Autodesk Revit","details":"Door placement mode was active, and the span ended on a Warning window."},{"start_s":17195.381,"end_s":17206.751,"action":"Dismissed the active door-placement state, zoomed and panned across the GL floor plan, and clicked at several locations; Revit displayed a geometry collision warning before the view was repositioned.","intent":"Navigate the floor plan and attempt door placement while checking for conflicts.","app":"Autodesk Revit","details":"Visible warning stated: “There exist geometry collision. These elements might not be copied.”"},{"start_s":17206.751,"end_s":17217.272,"action":"Returned to the GL floor plan, zoomed into the FHС shaft area, and selected a raster image underlay; resized or moved the Revit window and canceled active commands.","intent":"Inspect the shaft and underlying plan detail while preparing door placement.","app":"Autodesk Revit","details":"The raster image underlay was selected, with Modify | Raster Images controls visible."},{"start_s":17217.272,"end_s":17229.713,"action":"Zoomed tightly into the door and wall junction, entered scale or selection interactions on the plan, canceled several commands, and opened the door Type Properties dialog.","intent":"Inspect or adjust the selected door type and its placement.","app":"Autodesk Revit","details":"The view showed a close-up of a 3-foot Doors_ExtDbl_Flush door at the top of a toilet/shaft area."},{"start_s":17229.713,"end_s":17239.599,"action":"Returned from Type Properties to the GL floor plan and placed or adjusted the double-door instance over the underlay; the door swing and frame geometry became visible in the close-up.","intent":"Modify the double-door placement in the floor plan.","app":"Autodesk Revit","details":"Doors_ExtDbl_Flush 3' remained active in Modify | Place Door mode."},{"start_s":17239.599,"end_s":17248.48,"action":"Navigated away from the close-up, switched from the GL floor plan to the 3D view, and rotated or zoomed the model to display the building layout.","intent":"Review the modeled building in three dimensions after editing the door.","app":"Autodesk Revit","details":"The final view was Autodesk Revit 2025.4, 3D View: {3D}, showing the multi-room building model."},{"start_s":17248.48,"end_s":17257.129,"action":"Navigated the Revit 3D view with middle-button scrolling and clicks, changing the camera around the building interior and selecting wall elements.","intent":"Inspect the 3D building model and focus on interior wall geometry.","app":"Autodesk Revit","details":null},{"start_s":17257.129,"end_s":17266.088,"action":"Scrolled and navigated through the Revit 3D model, selecting wall and door-area elements, then zoomed out to a distant overview of the building.","intent":"Review different areas of the building model and obtain an overall view.","app":"Autodesk Revit","details":"Escape and save-related key events occurred while the view was being navigated."},{"start_s":17266.088,"end_s":17274.396,"action":"Paused briefly, then scrolled the distant 3D view and clicked within the model without a visible change to the overall view.","intent":"Continue reviewing the 3D model.","app":"Autodesk Revit","details":null},{"start_s":17274.396,"end_s":17284.605,"action":"Used repeated middle-button clicks and scrolling to orbit and zoom through the 3D building, moving from a broad view into a close view of rooms, walls, doors, windows, and a stair area.","intent":"Inspect interior architectural elements in the 3D model.","app":"Autodesk Revit","details":null},{"start_s":17284.605,"end_s":17295.605,"action":"Scrolled through the close 3D view and selected a wall, then switched from the 3D view to the GL floor plan.","intent":"Move from 3D inspection to review of the GL floor plan.","app":"Autodesk Revit","details":"The window title changed to Floor Plan: GL."},{"start_s":17295.605,"end_s":17304.939,"action":"Scrolled and clicked in the GL floor plan to reposition the view around the lobby, stairs, shafts, lifts, and corridor; typed “LI,” then activated the Place Lines tool and left it ready for a line start point.","intent":"Inspect the floor plan and begin placing detail lines.","app":"Autodesk Revit","details":"The final view is zoomed into the stair and shaft area with Modify | Place Lines active."},{"start_s":17304.939,"end_s":17315.565,"action":"Exited the active command, navigated around the GL floor plan with clicks and scrolling, typed briefly, and activated the line tool; the view ended zoomed into the corridor and shafts.","intent":"Navigate to and begin placing or inspecting lines in a specific floor-plan area.","app":"Autodesk Revit","details":"GL floor plan; Modify | Place Lines was active at the end."},{"start_s":17315.565,"end_s":17325.585,"action":"Clicked and scrolled around the corridor, stair, and shaft area while repeatedly canceling and re-entering line placement; left the line tool waiting for a start point.","intent":"Position the view and prepare line placement near the shafts and corridor.","app":"Autodesk Revit","details":"The view remained zoomed into the GL floor plan around the Staircase Press Shaft and PHE Shaft."},{"start_s":17325.585,"end_s":17335.437,"action":"Scrolled and selected several elements around the FHC shaft and adjacent doors, canceling selections or commands between clicks; ended with the line tool ready for another start point.","intent":"Inspect or target architectural elements around the shaft and corridor while working in line placement mode.","app":"Autodesk Revit","details":"A temporary cyan line appeared near the FHC Shaft during the span."},{"start_s":17335.437,"end_s":17345.742,"action":"Clicked around the shaft and corridor, canceled commands, and zoomed out substantially to review a larger portion of the floor plan.","intent":"Review the broader floor-plan context after inspecting the shaft area.","app":"Autodesk Revit","details":"The GL plan ended in a wide view showing multiple apartment layouts."},{"start_s":17345.742,"end_s":17353.829,"action":"Navigated and zoomed around the floor plan, selected a raster image, then switched to door placement and positioned the cursor near the PHE Shaft doorway.","intent":"Place or inspect a door at the shaft/corridor opening.","app":"Autodesk Revit","details":"Modify | Place Door was active at the end; the selected type was Doors_ExtDbI_Flush 3'."},{"start_s":17353.829,"end_s":17367.544,"action":"Canceled the door command, scrolled and zoomed out over the GL plan, resized or moved the Revit window, and selected the raster image; ended with the full floor-plan image visible.","intent":"Exit door placement and review the overall floor-plan raster underlay.","app":"Autodesk Revit","details":"The final view showed the complete apartment floor-plan raster image with Raster Images selected."},{"start_s":17367.544,"end_s":17372.921,"action":"Opened Revit’s Manage Links dialog, selected the listed linked image, and clicked the dialog controls before closing it.","intent":"Inspect or manage the linked image resource.","app":"Autodesk Revit","details":"The link was shown as loaded with an absolute saved path."},{"start_s":17372.921,"end_s":17384.747,"action":"Returned to the GL floor plan, zoomed and panned across the plan, and selected visible model elements while navigating the view.","intent":"Inspect the floor plan in more detail.","app":"Autodesk Revit","details":null},{"start_s":17384.747,"end_s":17394.895,"action":"Switched from the GL floor plan to the 3D view, then zoomed and navigated around the building model.","intent":"Inspect the building in three dimensions.","app":"Autodesk Revit","details":"The 3D view changed from a close interior perspective to a distant overall view."},{"start_s":17394.895,"end_s":17405.492,"action":"Returned to the GL floor plan, zoomed and panned across it, then switched back to the 3D view and adjusted the model view.","intent":"Compare the floor plan and 3D model views.","app":"Autodesk Revit","details":"The 3D view ended at a distant oblique overview."},{"start_s":17405.492,"end_s":17412.997,"action":"Switched windows and navigated the displayed 3D Revit model by middle-clicking and scrolling, changing from a low exterior view to a wider elevated view.","intent":"Continue inspecting the building model from different viewpoints.","app":"Screen recorder","details":"The visible content remained the Revit 3D model."},{"start_s":17412.997,"end_s":17431.967,"action":"Paused on the Revit 3D overview, then middle-clicked to adjust the view, leaving the model smaller and farther away on screen.","intent":"Refine the overall 3D model viewpoint.","app":"Autodesk Revit","details":null},{"start_s":17431.967,"end_s":17441.061,"action":"Navigated the Revit 3D view by scrolling and middle-clicking, changing from an angled building view to a more top-down view of the floor layout.","intent":"Inspect the building model from different viewpoints.","app":"Autodesk Revit","details":null},{"start_s":17441.061,"end_s":17453.333,"action":"Continued orbiting, scrolling, and middle-clicking in the Revit 3D view to reposition and zoom the building model, ending on a closer exterior view before switching to the Rendering window.","intent":"Refine the model viewpoint for rendering.","app":"Autodesk Revit","details":null},{"start_s":17453.333,"end_s":17457.669,"action":"Returned to the Revit 3D view and opened the Rendering dialog, leaving the building model visible behind it.","intent":"Access rendering controls for the current view.","app":"Autodesk Revit","details":"Rendering dialog opened."},{"start_s":17457.669,"end_s":17477.669,"action":"Adjusted rendering settings, including selecting printer output and changing the resolution to 600 DPI, then initiated rendering and waited while the Rendering Progress window appeared.","intent":"Configure and start a high-resolution render of the 3D view.","app":"Autodesk Revit","details":"Rendering progress window displayed."},{"start_s":17477.669,"end_s":17484.522,"action":"Waited while the render progressed; the Rendering Progress window showed approximately 19% completion over a black render area.","intent":"Monitor the ongoing render.","app":"Autodesk Revit","details":"Render progress was visible at 19%."},{"start_s":17484.522,"end_s":17499.858,"action":"Continued waiting for the render, with the Rendering Progress window advancing to approximately 28% completion.","intent":"Continue monitoring the ongoing render.","app":"Autodesk Revit","details":"Render progress was visible at 28%."},{"start_s":17499.858,"end_s":17516.038,"action":"Clicked twice near the lower-right area while Autodesk Revit continued rendering the 3D view.","intent":"Monitor the active render.","app":"Autodesk Revit","details":"Rendering Progress dialog showed approximately 38%."},{"start_s":17516.038,"end_s":17536.038,"action":"Waited while Autodesk Revit continued rendering the 3D model without interaction.","intent":"Allow the render to progress.","app":"Autodesk Revit","details":"Rendering Progress remained open and showed about 37% progress."},{"start_s":17536.038,"end_s":17553.4,"action":"Scrolled several times while the Revit rendering dialog remained open; the rendered 3D view updated to show more of the building facade.","intent":"Inspect the rendered model during processing.","app":"Autodesk Revit","details":"Rendering progress displayed about 50%."},{"start_s":17553.4,"end_s":17573.4,"action":"Waited while Autodesk Revit continued rendering the 3D model.","intent":"Allow the rendering process to continue.","app":"Autodesk Revit","details":"Rendering Progress showed about 58%."},{"start_s":17573.4,"end_s":17593.4,"action":"Waited without interaction as the Revit render advanced.","intent":"Allow the render to complete.","app":"Autodesk Revit","details":"Rendering Progress reached approximately 89%."},{"start_s":17593.4,"end_s":17602.089,"action":"Waited as Autodesk Revit approached completion of the render and remained the active application.","intent":"Monitor rendering completion.","app":"Autodesk Revit","details":"Rendering Progress showed about 98%; the active window was titled Rendering."},{"start_s":17602.089,"end_s":17607.497,"action":"Clicked Save to Project from the Rendering dialog, opening the Save To Project state in Revit.","intent":"Save the rendered image into the Revit project.","app":"Autodesk Revit","details":null},{"start_s":17607.497,"end_s":17627.497,"action":"Confirmed the save action and waited while Revit remained on the Rendering dialog showing the rendered 3D building; memory pressure was reported near the end of the interval.","intent":"Complete processing of the rendered image save.","app":"Autodesk Revit","details":"Rendering dialog showed Draft quality, Printer output at 600 DPI, and Save to Project controls."},{"start_s":17627.497,"end_s":17637.026,"action":"Returned to the 3D view, selected a door, and opened Type Properties for the Doors_Concept_ExtDbl family type 8'.","intent":"Inspect or modify the selected door type properties.","app":"Autodesk Revit","details":"Type Properties displayed Function Exterior, Concept materials, and 8' width dimensions."},{"start_s":17637.026,"end_s":17641.717,"action":"Reviewed the Type Properties dialog and clicked within the Function and Materials and Finishes parameter areas.","intent":"Review door construction and material parameters.","app":"Autodesk Revit","details":"The dialog remained open for Doors_Concept_ExtDbl type 8'; no confirmed value change was visible."},{"start_s":17641.717,"end_s":17657.839,"action":"Opened the Material Browser, searched for GLASS, selected the Door - Glazing material from the results, and confirmed the material selection.","intent":"Assign or inspect a glazing material for the door.","app":"Autodesk Revit","details":"Material Browser changed from Concept to Door - Glazing and displayed glazing appearance settings."},{"start_s":17657.839,"end_s":17667.826,"action":"Closed the material and type dialogs, returned to the 3D view, navigated the model with scrolling, and selected the exterior door near the balcony.","intent":"Return to the model and inspect the door after material selection.","app":"Autodesk Revit","details":"The selected door was highlighted in the 3D view and identified as Doors_Concept_ExtDbl type 8'."},{"start_s":17667.826,"end_s":17686.727,"action":"Opened the Material Browser from door Type Properties, searched for “GLASS,” selected the “Door - Glazing” material, and confirmed the selection.","intent":"Assign a glazing material to the door type.","app":"Autodesk Revit","details":"Material Browser showed “Door - Glazing” with clear glazing properties."},{"start_s":17686.727,"end_s":17696.745,"action":"Closed the material and type property dialogs, returned to the 3D view, and orbited the building model to inspect it from different angles.","intent":"Review the updated door glazing in the 3D model.","app":"Autodesk Revit","details":"The 3D view displayed the multi-room building with doors, windows, and balconies."},{"start_s":17696.745,"end_s":17707.173,"action":"Continued orbiting and zooming around the 3D model, moving from an overall view to a closer exterior view of a balcony, door, and windows.","intent":"Inspect exterior elements and the applied glazing visually.","app":"Autodesk Revit","details":"A close view showed selected wall/window geometry near a balcony."},{"start_s":17707.173,"end_s":17715.866,"action":"Scrolled and adjusted the 3D view to review the building exterior and balcony area from a slightly different framing.","intent":"Continue reviewing the model appearance.","app":"Autodesk Revit","details":"The view remained on the exterior brick walls, doors, windows, and balcony."},{"start_s":17715.866,"end_s":17728.254,"action":"Orbited and zoomed out across the 3D model, then opened the Rendering dialog from the ribbon.","intent":"Prepare a rendered preview of the building exterior.","app":"Autodesk Revit","details":"The Rendering dialog opened with draft quality and exterior sunlight settings."},{"start_s":17728.254,"end_s":17739.752,"action":"Adjusted the rendering settings and started rendering; the Rendering Progress dialog appeared and remained at 0% while processing.","intent":"Generate a rendered exterior view of the model.","app":"Autodesk Revit","details":"Rendering used medium quality, printer output at 600 DPI, exterior sunlight, and a few-clouds sky background."},{"start_s":17739.752,"end_s":17752.73,"action":"Waited while Autodesk Revit rendered the 3D view; the rendering progress dialog advanced to 4%.","intent":"Monitor the ongoing rendering process.","app":"Autodesk Revit","details":"Rendering Progress dialog displayed with close-on-complete enabled."},{"start_s":17752.73,"end_s":17772.73,"action":"Waited for the Revit render to continue after clicking near the lower screen area; progress advanced from 4% to 5%.","intent":"Allow the 3D view rendering to proceed.","app":"Autodesk Revit","details":"The rendered viewport remained black while the progress dialog stayed open."},{"start_s":17772.73,"end_s":17778.56,"action":"Waited while rendering continued after a right-click near the lower screen area; progress reached 14%.","intent":"Monitor rendering progress.","app":"Autodesk Revit","details":"Rendering remained active in the 3D view."},{"start_s":17778.56,"end_s":17798.56,"action":"Waited without further interaction while Revit continued rendering; progress increased to 18%.","intent":"Allow the rendering operation to continue.","app":"Autodesk Revit","details":"No interaction events were recorded."},{"start_s":17798.56,"end_s":17812.589,"action":"Waited through continued rendering after clicking in the Project Browser area; progress advanced to 27%.","intent":"Monitor the long-running 3D rendering.","app":"Autodesk Revit","details":"The progress dialog indicated Level 1 at 99.00% of 5."},{"start_s":17812.589,"end_s":17832.589,"action":"Waited while Revit continued rendering, reaching 31%; a memory-pressure event was recorded near the end of the span.","intent":"Allow the rendering to complete despite resource pressure.","app":"Autodesk Revit","details":"The 3D viewport remained black and the Rendering Progress dialog stayed open."},{"start_s":17832.589,"end_s":17852.589,"action":"Waited while the Revit rendering continued, with the Rendering Progress dialog showing approximately 39% completion.","intent":"Allow the rendering process to proceed.","app":"Autodesk Revit","details":"The 3D view remained black while rendering was in progress."},{"start_s":17852.589,"end_s":17861.129,"action":"Waited for the Revit render and clicked repeatedly in the 3D view area without a visible change.","intent":"Interact with the rendering workspace while monitoring progress.","app":"Autodesk Revit","details":"Rendering progress increased to about 42%."},{"start_s":17861.129,"end_s":17880.131,"action":"Waited while rendering continued, then clicked repeatedly in the black 3D view area.","intent":"Monitor the ongoing render.","app":"Autodesk Revit","details":"The Rendering Progress dialog remained open and advanced to about 43%."},{"start_s":17880.131,"end_s":17887.316,"action":"Scrolled repeatedly while the Revit rendering dialog remained open.","intent":"Attempt to navigate the workspace during rendering.","app":"Autodesk Revit","details":"No visible view change occurred; rendering remained around 43%."},{"start_s":17887.316,"end_s":17907.316,"action":"Waited while the Revit rendering process continued without further interaction.","intent":"Allow the render to continue.","app":"Autodesk Revit","details":"Progress reached approximately 44%, with the 3D view still black."},{"start_s":17907.316,"end_s":17922.729,"action":"Waited for the render and clicked twice in the right-side Revit workspace area.","intent":"Interact with the workspace while monitoring rendering progress.","app":"Autodesk Revit","details":"The Rendering Progress dialog remained open and showed about 45% completion."},{"start_s":17922.729,"end_s":17930.977,"action":"Clicked near the rendering controls while the Rendering Progress dialog remained open, advancing from 45% to 46%.","intent":"Monitor the active rendering operation.","app":"Autodesk Revit","details":"Rendering Progress showed level completion advancing during the interval."},{"start_s":17930.977,"end_s":17950.977,"action":"Waited while Revit continued rendering without recorded interaction.","intent":"Allow the rendering operation to proceed.","app":"Autodesk Revit","details":"Rendering Progress remained visible at approximately 46%."},{"start_s":17950.977,"end_s":17962.485,"action":"Continued waiting for the Revit rendering operation, then opened the Stop Operation confirmation dialog.","intent":"Attempt to interrupt the ongoing rendering.","app":"Autodesk Revit","details":"The confirmation asked whether to stop the operation."},{"start_s":17962.485,"end_s":17967.102,"action":"Clicked within the Revit workspace and switched between the Stop Operation, Rendering Progress, and Rendering windows.","intent":"Manage the rendering operation and return to rendering controls.","app":"Autodesk Revit","details":"The Rendering window became visible with render settings and controls."},{"start_s":17967.102,"end_s":17972.819,"action":"Returned to the Revit 3D model view, pressed a key, and then switched to Windows Explorer.","intent":"Leave the rendering interface and access another application.","app":"Autodesk Revit","details":"The 3D view displayed the brick building model before the application switch."},{"start_s":17972.819,"end_s":17992.148,"action":"Switched back to Revit, middle-clicked and repeatedly scrolled the 3D view to navigate around the brick building model, then switched to Windows Explorer.","intent":"Inspect different areas of the 3D building model.","app":"Autodesk Revit","details":"The view was panned or zoomed from a close-up wall and window to a broader interior and exterior view."},{"start_s":17992.148,"end_s":18011.642,"action":"Navigated the Revit 3D view through repeated middle-click and scroll interactions, changing the visible model from brick walls and railings to a close-up of a light-colored floor surface.","intent":"Inspect or navigate the 3D building model.","app":"Autodesk Revit","details":"The view remained in PROJECT 11's 3D view; no confirmed model edit occurred."},{"start_s":18011.642,"end_s":18030.177,"action":"Continued navigating the Revit 3D view with middle-clicks and extensive scrolling, moving between close-up floor and wall surfaces and ending on a brick-walled room area.","intent":"Inspect the model geometry from different 3D viewpoints.","app":"Autodesk Revit","details":"The final view showed brick walls, an open white floor area, and a selected wall edge."},{"start_s":18030.177,"end_s":18044.213,"action":"Switched through File Explorer and Revit windows, briefly displaying a raster-image view and then returning to the PROJECT 11 GL floor plan; pressed Escape while windows were resized or rearranged.","intent":"Switch documents or views and return to the project floor plan.","app":"Autodesk Revit; Windows Explorer","details":"File Explorer showed Downloads, while Revit ultimately displayed the GL floor plan with furnished rooms."},{"start_s":18044.213,"end_s":18048.336,"action":"Opened the Revit Model Upgrade prompt and selected the option to proceed, after which Revit displayed the upgrade progress dialog from Autodesk Revit 2024 to Autodesk Revit 2025.","intent":"Upgrade the project model for use in Revit 2025.","app":"Autodesk Revit","details":"The prompt warned that saving the upgraded model would make it unavailable to earlier releases."},{"start_s":18048.336,"end_s":18054.109,"action":"Waited while Revit processed the model upgrade, with the GL floor plan visible behind the upgrade window; no further confirmed content edit occurred.","intent":"Allow the Revit model upgrade to complete.","app":"Autodesk Revit","details":"The upgrade dialog remained active and the application repeatedly hid and unhid during processing."},{"start_s":18054.109,"end_s":18065.525,"action":"Displayed the Load into Projects dialog for a furniture family, confirmed loading into PROJECT 11, and returned to the GL floor plan with component placement mode active.","intent":"Load the furniture family into PROJECT 11 for placement.","app":"Autodesk Revit","details":"The dialog listed PROJECT 11.rvt checked for loading; the final view showed Revit's Modify | Place Component mode."},{"start_s":18065.525,"end_s":18074.36,"action":"Switched from Downloads to Revit and waited while the Model Upgrade dialog remained open for the PROJECT 11 floor plan.","intent":"Monitor the Revit model upgrade state.","app":"Autodesk Revit","details":"Dialog indicated an upgrade from Autodesk Revit 2009 to Autodesk Revit 2025."},{"start_s":18074.36,"end_s":18079.673,"action":"Waited for Revit to finish upgrading and loading the project; the floor plan remained visible with a loading indicator before the view became ready.","intent":"Allow the upgraded Revit project and families to load.","app":"Autodesk Revit","details":"Status bar showed upgrading loaded families."},{"start_s":18079.673,"end_s":18084.475,"action":"Reviewed the loaded WC_-_Disabled 3D thumbnail showing a disabled toilet arrangement, then opened the Load into Projects dialog.","intent":"Load the family into selected Revit projects.","app":"Autodesk Revit","details":"The family editor displayed plumbing fixtures in a 3D view."},{"start_s":18084.475,"end_s":18089.246,"action":"Returned to the PROJECT 11 floor plan with the WC_-_Disabled component selected in Place Component mode, then switched to Downloads in File Explorer.","intent":"Prepare to place the loaded toilet arrangement in the project.","app":"Autodesk Revit","details":"Revit showed the component preview and placement controls."},{"start_s":18089.246,"end_s":18095.348,"action":"Interacted with the floor plan while Place Component mode was active, then reopened and waited through the Model Upgrade dialog for the 2009-to-2025 upgrade process.","intent":"Continue placing the family while Revit handles the required model upgrade.","app":"Autodesk Revit","details":"The dialog progressed from upgrade choices to an in-progress upgrade state."},{"start_s":18095.348,"end_s":18099.463,"action":"Switched to the Cook_Top_(2) 3D family view, waited for it to load, and opened Load into Projects; the dialog listed PROJECT 11.rvt as selected.","intent":"Load the Cook_Top family into the selected Revit project.","app":"Autodesk Revit","details":"Load into Projects dialog listed LR1996_SILLON_ESEDRA_rfa, PROJECT 11.rvt, suite_elevator closet.rfa, and WC_-_Disabled.rfa."},{"start_s":18099.463,"end_s":18116.635,"action":"Switched from Revit to Downloads in File Explorer and left the folder visible while browsing project and family files.","intent":"Review available downloaded Revit-related files.","app":"Windows Explorer","details":"Downloads displayed many RFA, RVT, image, and archive files."},{"start_s":18116.635,"end_s":18121.04,"action":"Returned briefly to Revit, switched back to Downloads, and opened the 82730_lavadorawashingmachine folder.","intent":"Locate the washing-machine family file.","app":"Windows Explorer","details":"The opened folder was titled 82730_lavadorawashingmachine."},{"start_s":18121.04,"end_s":18130.258,"action":"Returned to Revit and waited through the Model Upgrade dialog and repeated window transitions while the project remained on the GL floor plan.","intent":"Continue working in the Revit project while handling the upgrade prompt.","app":"Autodesk Revit","details":"The floor plan showed the Place Component context with Cook_Top_(2) selected."},{"start_s":18130.258,"end_s":18142.078,"action":"Displayed the Load into Projects dialog for the washing-machine family, confirmed loading, and returned to the PROJECT 11 GL floor plan.","intent":"Load the washing-machine family into the project.","app":"Autodesk Revit","details":"The dialog listed open projects/families and the family editor view was titled Lavadora - 3D - Indesit - Lavadora de 10Kg."},{"start_s":18142.078,"end_s":18148.192,"action":"Switched to Downloads, navigated back from the washing-machine folder, and opened the 90259_fregaderosink folder before returning toward Revit.","intent":"Locate a sink family file for possible loading.","app":"Windows Explorer","details":"The folder contained an Autodesk Revit Family named Fregadero - 3D - Evier."},{"start_s":18148.192,"end_s":18155.292,"action":"Returned to Revit and displayed the Model Upgrade prompt for the selected washing-machine family, then waited while the project view remained visible.","intent":"Handle the legacy-family upgrade prompt.","app":"Autodesk Revit","details":"The prompt stated that the model must be upgraded from Revit 2011 to Revit 2025 and offered Upgrade the model or Cancel the upgrade."},{"start_s":18155.292,"end_s":18161.155,"action":"Confirmed the Load into Projects dialog in Revit, returned to PROJECT 11, and briefly opened Downloads in File Explorer to view the selected Revit family file.","intent":"Load the edited family into an open project and inspect the related downloaded file.","app":"Autodesk Revit and Windows Explorer","details":"The dialog showed PROJECT 11 selected before the view switched to the 90259_fregaderosink folder and then Downloads."},{"start_s":18161.155,"end_s":18165.287,"action":"Returned to PROJECT 11 and interacted with the Model Upgrade dialog while the GL floor plan remained visible.","intent":"Continue opening or upgrading the project for use in Revit 2025.","app":"Autodesk Revit","details":"The upgrade dialog appeared and the window repeatedly refreshed or resized; completion was not visibly confirmed."},{"start_s":18165.287,"end_s":18169.293,"action":"Switched to the refrigerator family document, waited for its 3D view to load, and clicked Load into Projects.","intent":"Load the refrigerator family into an open Revit project.","app":"Autodesk Revit","details":"The family document was LR2078_REFRIGERADOR_TWIN_COOLING_PLUS_SAMSUNG (1); the span ended as the Load into Projects window appeared."},{"start_s":18169.293,"end_s":18173.354,"action":"Confirmed the refrigerator family load dialog, returned to Revit, and briefly opened Downloads before switching back to the project and Model Upgrade window.","intent":"Proceed with loading the refrigerator family into PROJECT 11 while the project upgrade runs.","app":"Autodesk Revit and Windows Explorer","details":"The refrigerator 3D model was visible before the Load into Projects dialog; Downloads displayed many Revit files and folders."},{"start_s":18173.354,"end_s":18178.566,"action":"Waited while Revit displayed the Model Upgrade dialog stating that the model was being upgraded from Autodesk Revit 2009 to Autodesk Revit 2025, then returned to the GL floor plan.","intent":"Allow PROJECT 11 to upgrade to the current Revit version.","app":"Autodesk Revit","details":"The upgrade remained in progress during the observed interval."},{"start_s":18178.566,"end_s":18186.571,"action":"Switched to the Santiago_Sofa_6480 family, opened Load into Projects, confirmed the dialog, and returned to the family 3D view; later Escape presses dismissed the active placement or command state.","intent":"Load the sofa family into an open Revit project and exit the active command.","app":"Autodesk Revit","details":"The dialog showed PROJECT 11 selected; the span ended with the family document active."},{"start_s":18186.571,"end_s":18195.427,"action":"Switched from Downloads to Revit and brought up the Model Upgrade dialog for PROJECT 11, showing an upgrade from Autodesk Revit 2019 to 2025; waited while the dialog remained open.","intent":"Upgrade the opened Revit project to the current version.","app":"Autodesk Revit","details":"The model upgrade dialog remained visible and no completion was shown."},{"start_s":18195.427,"end_s":18199.517,"action":"Waited through Revit window changes as the active document changed to LR1658_M_141, then clicked near the upper-right window area.","intent":"Continue loading or managing the Revit document during the upgrade process.","app":"Autodesk Revit","details":"The document view appeared blank while loading."},{"start_s":18199.517,"end_s":18208.908,"action":"Opened the Load into Projects window, confirmed the operation, returned to the LR1658_M_141 3D view, and then switched back to PROJECT 11 where the GL floor plan showed the LR1658_M_141 component selected for placement.","intent":"Load the family into the project and prepare it for placement.","app":"Autodesk Revit","details":"The selected component was LR1658_M_141 and Revit was in Modify | Place Component mode."},{"start_s":18208.908,"end_s":18213.595,"action":"Switched to Downloads, opened another Revit file, and returned to PROJECT 11; reviewed the Model Upgrade prompt stating that the model would be upgraded from Revit 2009 to Revit 2025, then proceeded to the upgrade progress dialog.","intent":"Open another model and begin upgrading it for use in Revit 2025.","app":"Autodesk Revit","details":"The prompt warned that saving the upgraded model would prevent opening it in earlier releases."},{"start_s":18213.595,"end_s":18218.985,"action":"Waited while the Revit model upgrade ran, then pressed Escape and clicked near the lower edge of the window.","intent":"Monitor and possibly exit or dismiss the ongoing upgrade/loading state.","app":"Autodesk Revit","details":"The PROJECT 11 floor plan remained visible during the upgrade; the subsequent view showed another Revit document loading."},{"start_s":18218.985,"end_s":18226.273,"action":"Switched to Downloads, opened the Tall_Cabinet-Double_Door(2) Revit family, and returned to Revit where a Model Upgrade dialog showed an upgrade from Autodesk Revit 2020 to 2025 over the cabinet 3D view.","intent":"Open the cabinet family and upgrade it to the current Revit version.","app":"Autodesk Revit","details":"The cabinet model was visible behind the upgrade dialog and no completion was shown."},{"start_s":18226.273,"end_s":18231.361,"action":"Switched among Autodesk Revit family and project windows, ending on the Conjunto Estar Sofás 3D view; clicked the Load into Project control.","intent":"Load the family into a Revit project.","app":"Autodesk Revit","details":"Displayed a cabinet family and then a furnished living-room project view."},{"start_s":18231.361,"end_s":18248.99,"action":"Opened the Load into Projects dialog, reviewed the listed projects and families, and confirmed with OK; waited while Revit returned to the project view.","intent":"Choose destination projects for loading the family.","app":"Autodesk Revit","details":"The dialog showed PROJECT 11 selected among multiple listed files."},{"start_s":18248.99,"end_s":18255.812,"action":"Switched through Downloads and Autodesk Revit windows, ending on the PROJECT 11 floor plan; clicked the Load into Project control and opened the Load into Projects dialog.","intent":"Load another Revit family into a project.","app":"Windows Explorer and Autodesk Revit","details":"The floor plan displayed a furnished multi-unit layout before the load dialog appeared."},{"start_s":18255.812,"end_s":18261.674,"action":"Viewed the LR2075_RACK_DE_TV_MONTANA 3D family, then returned to PROJECT 11 and entered component placement; the view remained blank/loading before the interval ended.","intent":"Place the loaded TV rack component in the project.","app":"Autodesk Revit","details":"Revit showed the Modify | Place Component context and a loading indicator."},{"start_s":18261.674,"end_s":18266.004,"action":"Switched to Downloads and back to PROJECT 11, then opened the Model Upgrade prompt and selected the option to proceed; Revit began upgrading the model from Autodesk Revit 2009 to 2025.","intent":"Upgrade the legacy Revit project for use in Revit 2025.","app":"Windows Explorer and Autodesk Revit","details":"The prompt warned that saving would prevent opening the model in earlier releases."},{"start_s":18266.004,"end_s":18270.895,"action":"Waited while Revit upgraded the model from Autodesk Revit 2009 to Autodesk Revit 2025; returned to the project floor plan and then switched to the Load into Projects window.","intent":"Complete the model upgrade and continue loading the family.","app":"Autodesk Revit","details":"The upgraded project displayed a furnished floor plan before the Load into Projects window appeared."},{"start_s":18270.895,"end_s":18275.555,"action":"Switched into Autodesk Revit and returned to the PROJECT 11 floor plan, with repeated window hiding, resizing, and Escape presses before the plan became visible.","intent":"Return to the project floor plan and stabilize the Revit window.","app":"Autodesk Revit","details":"PROJECT 11, Floor Plan: GL was shown after the window transition."},{"start_s":18275.555,"end_s":18284.683,"action":"Opened Downloads briefly, then returned to Revit and initiated or continued a Model Upgrade dialog converting the project from Autodesk Revit 2020 to Autodesk Revit 2025.","intent":"Open the project in the current Revit version and handle its upgrade prompt.","app":"Windows Explorer and Autodesk Revit","details":"The Model Upgrade dialog remained visible over the floor plan; window resizing and movement occurred."},{"start_s":18284.683,"end_s":18295.079,"action":"Waited while Revit processed the model upgrade and switched to the Conjunto Mesa 01 3D view, then opened the Load into Projects window.","intent":"Complete the upgrade and load the furniture family into a project.","app":"Autodesk Revit","details":"The final visible state showed the dining table family in 3D and a transition to Load into Projects."},{"start_s":18295.079,"end_s":18307.66,"action":"Displayed the Conjunto Mesa 01 3D furniture family while Revit repeatedly resized and refreshed, then switched back toward the PROJECT 11 floor plan and opened Windows Explorer.","intent":"Prepare the furniture family and return to the project for placement.","app":"Autodesk Revit","details":"The 3D view showed a furnished dining table; no completed placement was visible."},{"start_s":18307.66,"end_s":18312.373,"action":"Opened the Downloads subfolder 82556_camabed, selected the Autodesk Revit family file, then returned to Revit where a Model Upgrade dialog appeared and the component placement mode was active.","intent":"Load a furniture family from Downloads into the project.","app":"Windows Explorer and Autodesk Revit","details":"The selected file was a Revit family beginning with “Cama - 3D - Genérico - Modelo U...”."},{"start_s":18312.373,"end_s":18317.613,"action":"Waited through the Model Upgrade processing, switched to the Cama 3D family view, and pressed Escape while the project remained in Modify | Place Component mode.","intent":"Complete the family loading process and manage the active placement command.","app":"Autodesk Revit","details":"The project floor plan and the loaded bed family view were alternately shown; no placement click was completed."},{"start_s":18317.613,"end_s":18326.507,"action":"Confirmed the Load into Projects dialog in Revit, returned to the PROJECT 11 floor plan, then opened the Downloads folder in File Explorer and closed the Explorer window.","intent":"Check the available project file and return to the Revit project.","app":"Autodesk Revit and Windows Explorer","details":"The Revit dialog showed PROJECT 11 selected; File Explorer displayed a single Autodesk Revit Family archive."},{"start_s":18326.507,"end_s":18335.072,"action":"Returned to the PROJECT 11 GL floor plan and scrolled across the plan while the furniture placement tool remained active.","intent":"Navigate the floor plan to inspect or position the selected furniture family.","app":"Autodesk Revit","details":"The floor plan view showed multiple furnished rooms and the status prompt indicated placement of a free instance."},{"start_s":18335.072,"end_s":18345.048,"action":"Zoomed into the master bedroom area, canceled the active placement interaction with Escape, and clicked the furniture instance so it became selected.","intent":"Select and inspect the furniture family in the bedroom.","app":"Autodesk Revit","details":"The selected family was identified as “Cama - 3D - Genérico - Modelo Utah,” and the bed area was highlighted."},{"start_s":18345.048,"end_s":18353.644,"action":"Kept the bed furniture selected and adjusted the view slightly while issuing repeated keyboard inputs; the selected instance remained highlighted in the bedroom.","intent":"Continue working with the selected furniture instance.","app":"Autodesk Revit","details":"The Properties panel showed the selected item as Furniture on level GL, hosted by Floor: BEDROOM."},{"start_s":18353.644,"end_s":18363.856,"action":"Canceled the furniture interaction, switched from the GL floor plan to the PROJECT 11 3D view, and navigated the model with middle-button view controls.","intent":"Review the model in three dimensions after editing the furniture placement.","app":"Autodesk Revit","details":"The 3D view displayed the building interior with walls and rooms."},{"start_s":18363.856,"end_s":18373.482,"action":"Adjusted the 3D view using scroll and middle-button navigation, then zoomed far out and changed the viewing orientation to inspect the overall building model.","intent":"Inspect the overall 3D model from different scales and orientations.","app":"Autodesk Revit","details":"The model became a small isolated building cluster in the 3D canvas."},{"start_s":18373.482,"end_s":18392.37,"action":"Navigated within Autodesk Revit, switching from a 3D view to the GL floor plan and zooming or panning around the bedroom layout. Opened or interacted with the furniture placement context, then resized or moved the Revit window.","intent":"Inspect and navigate the project views while preparing to place or review components.","app":"Autodesk Revit","details":"The GL floor plan shows a furnished master bedroom, and the 3D view shows a highlighted bed component."},{"start_s":18392.37,"end_s":18400.828,"action":"Scrolled through the Revit component type list while remaining in Modify | Place Component mode, moving through furniture and appliance entries such as sofas, beds, refrigerators, and a TV rack.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The component search/list panel remained open over the GL floor plan."},{"start_s":18400.828,"end_s":18415.834,"action":"Continued scrolling through the component list, reviewing entries including grab rails, a washing machine, seating, a TV rack, and other families. Pressed Escape after browsing.","intent":"Continue searching the component library for a suitable family.","app":"Autodesk Revit","details":"The GL floor plan stayed visible behind the open component list."},{"start_s":18415.834,"end_s":18423.407,"action":"Pressed Escape to exit the component-list interaction, then switched to File Explorer and opened the Downloads folder.","intent":"Access downloaded project or component files.","app":"Windows File Explorer","details":"Downloads displayed Revit files, images, and other project-related files."},{"start_s":18423.407,"end_s":18433.23,"action":"Returned to Revit and navigated the GL floor plan by scrolling and panning. Entered or maintained Place Component mode and moved a furniture preview across the bedroom, living, balcony, and kitchen area.","intent":"Position or inspect a component in the floor plan.","app":"Autodesk Revit","details":"A large furniture preview was visible over the plan, with the status prompt to click to place a free instance."},{"start_s":18433.23,"end_s":18445.51,"action":"Continued panning and zooming across the GL floor plan, moving the active component placement preview toward the bedroom, lobby, dining, and drawing-room areas. Pressed Escape several times, then switched to Windows Explorer.","intent":"Review placement locations and then return to the file browser.","app":"Autodesk Revit","details":"The final Revit view showed the furnished floor plan with the component placement tool still active before switching applications."},{"start_s":18445.51,"end_s":18455.711,"action":"Opened Downloads in File Explorer, then returned to Autodesk Revit and adjusted the window and floor-plan view while a component placement remained active.","intent":"Return to the Revit project and continue component placement.","app":"Windows Explorer and Autodesk Revit","details":"Revit displayed PROJECT 11 floor plan with dining furniture selected for placement."},{"start_s":18455.711,"end_s":18466.995,"action":"Canceled the active placement with repeated Escape presses, zoomed and panned around the dining area, and entered “cm” while navigating the plan.","intent":"Exit or adjust the current component-placement operation and inspect the floor plan.","app":"Autodesk Revit","details":"The view changed from a close dining-area view to a broader plan view."},{"start_s":18466.995,"end_s":18476.62,"action":"Opened the component type selector, browsed the available furniture and appliance types, and selected the Basic_workdesk_7034 type.","intent":"Choose a different component type for placement.","app":"Autodesk Revit","details":"The type selector showed Conjunto Mesa 01, Cook_Top, Frigadero, Furniture_Desk, and other recently used types."},{"start_s":18476.62,"end_s":18487.25,"action":"Navigated and zoomed around the living room, kitchen, bedroom, and balcony areas, then selected a wall or nearby element while the component-placement tool remained active.","intent":"Inspect placement locations and identify a host or target area in the floor plan.","app":"Autodesk Revit","details":"The view ended centered on the living room, kitchen, and balcony."},{"start_s":18487.25,"end_s":18507.047,"action":"Scrolled through the plan and opened the component type selector, browsing entries such as suite elevator closet, Support_Metal_Circular, Termination_Wood_Rectangular, and WC_-_Disabled.","intent":"Browse available component types before continuing placement.","app":"Autodesk Revit","details":"The selector remained open over the living-room and kitchen portion of the plan."},{"start_s":18507.047,"end_s":18516.95,"action":"Selected the WC_-_Disabled plumbing fixture type, then zoomed and panned across the dining, drawing, bedroom, and toilet areas while keeping placement mode active.","intent":"Place or inspect the selected disabled-toilet fixture in the floor plan.","app":"Autodesk Revit","details":"The Properties panel identified WC_-_Disabled as a Disabled Toilet Arrangement; the view ended zoomed into M. Toilet."},{"start_s":18516.95,"end_s":18526.286,"action":"Typed spaces while positioning the WC_-_Disabled plumbing fixture, then clicked twice in the toilet room and left the fixture placement view active.","intent":"Position the disabled toilet arrangement in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; WC_-_Disabled family placement mode."},{"start_s":18526.286,"end_s":18542.819,"action":"Exited the placement command with Escape, switched to the 3D view, and navigated by scrolling and middle-button orbiting/zooming to inspect the building and bathroom area.","intent":"Inspect the model in 3D after placing the fixture.","app":"Autodesk Revit","details":"PROJECT 11 - 3D View: {3D}."},{"start_s":18542.819,"end_s":18552.808,"action":"Opened the Load into Projects dialog from the disabled toilet family, confirmed loading into the project, dismissed the Family Already Exists prompt, and returned to the project 3D view while navigating toward the bathroom.","intent":"Reload or update the existing plumbing fixture family in the project.","app":"Autodesk Revit","details":"Family Editor for WC_-_Disabled; Family Already Exists prompt appeared."},{"start_s":18552.808,"end_s":18562.873,"action":"Navigated the 3D view with middle-button orbiting and scrolling, activated section-box editing, and adjusted the model view to show a reduced portion of the building.","intent":"Inspect or isolate the relevant portion of the 3D model.","app":"Autodesk Revit","details":"3D view showed Section Boxes and then Temporary Hide/Isolate."},{"start_s":18562.873,"end_s":18582.596,"action":"Continued navigating the isolated 3D model, then switched to Floor Plan: GL and used scrolling and view interaction until the floor plan displayed the master toilet, dressing room, dining, and adjacent rooms.","intent":"Return to the floor plan and locate the placement area.","app":"Autodesk Revit","details":"PROJECT 11 - Floor Plan: GL; Door placement mode became active near the end."},{"start_s":18582.596,"end_s":18598.794,"action":"Scrolled the floor plan and switched back into the project view, then navigated to a wider plan view and activated the WC_-_Disabled plumbing fixture placement command.","intent":"Prepare to place the disabled toilet arrangement in the floor plan.","app":"Autodesk Revit","details":"Final view shows the living room, kitchen, dining, master bedroom, and master toilet; Modify | Place Component active."},{"start_s":18598.794,"end_s":18603.311,"action":"Scrolled through the Revit component type list and clicked within the list, bringing the washer entry and its preview into view.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The component browser showed washer, refrigerator, sofa, and other recently used types."},{"start_s":18603.311,"end_s":18620.836,"action":"Activated the washer component and navigated the floor plan with zooming and panning, leaving the washer selected in placement mode near the kitchen and balcony area.","intent":"Position a washing machine component on the floor plan.","app":"Autodesk Revit","details":"The selected type was Lavadora - 3D - Indesit - Lavadora de 10Kg, 600mm x 590mm x 820mm."},{"start_s":18620.836,"end_s":18639.247,"action":"Selected the LR1996_SILLON_ESEDRA sofa type, panned and zoomed across the living room and bedroom areas, and continued navigating while the component remained ready for placement.","intent":"Choose and position a sofa component in the plan.","app":"Autodesk Revit","details":"The floor plan view moved from the balcony and living room toward the bedroom; no completed placement is clearly visible."},{"start_s":18639.247,"end_s":18643.854,"action":"Scrolled the component browser and hovered over entries, showing previews for available types including the refrigerator, while the floor plan remained on the lobby and adjacent rooms.","intent":"Browse alternative component types for placement.","app":"Autodesk Revit","details":"The browser displayed Grab Rail Vertical, washer, sofa, rack, refrigerator, parking bays, and planting types."},{"start_s":18643.854,"end_s":18659.313,"action":"Selected the LR2075_RACK_DE_TV_MONTANA furniture type, navigated to the living room and kitchen, and dragged the component across the plan before cancelling placement with Escape.","intent":"Attempt to position a TV rack component in the floor plan.","app":"Autodesk Revit","details":"The selected rack appeared in placement mode with temporary geometry and alignment guides; placement was cancelled."},{"start_s":18659.313,"end_s":18670.282,"action":"Dismissed the save reminder and placement overlays, then activated the TV rack component again and dragged it near the kitchen wall, leaving it selected with temporary dimensions.","intent":"Resume positioning the TV rack component near the kitchen.","app":"Autodesk Revit","details":"The final view showed the rack selected beside the refrigerator and sink area, with a temporary 0.500 dimension."},{"start_s":18670.282,"end_s":18679.761,"action":"Scrolled and middle-clicked repeatedly while positioning a furniture component near the living room and kitchen boundary in the floor plan.","intent":"Position the selected furniture component in the floor plan.","app":"Autodesk Revit","details":"Place Component mode remained active; the view zoomed in around the refrigerator and adjacent wall."},{"start_s":18679.761,"end_s":18688.269,"action":"Switched briefly to a furniture family 3D view, returned to the PROJECT 11 floor plan, and entered “cm” followed by Space while continuing component placement.","intent":"Return to the target floor plan and adjust the active component placement.","app":"Autodesk Revit","details":"The family editor showed a sofa-like furniture object before the PROJECT 11 floor plan reappeared."},{"start_s":18688.269,"end_s":18698.997,"action":"Pressed Space and middle-clicked around the selected component and nearby walls, then clicked the component area to refine its placement and view.","intent":"Rotate or position the selected furniture component against the floor-plan layout.","app":"Autodesk Revit","details":"The selected component remained aligned along the wall beside the kitchen."},{"start_s":18698.997,"end_s":18717.535,"action":"Scrolled and pressed Escape several times, resized and repositioned the Revit window, navigated across the floor plan, and entered “cm” while continuing to work in Place Component mode.","intent":"Navigate the floor plan and adjust the active furniture placement.","app":"Autodesk Revit","details":"The view moved from the kitchen/living area to the dining and drawing rooms; the active component preview remained visible."},{"start_s":18717.535,"end_s":18725.636,"action":"Switched back to the Revit floor plan, selected the LR1658_M_141 furniture component, pressed Space, resized the window, and scrolled to frame the drawing room.","intent":"Select and orient a furniture component for placement in the drawing room.","app":"Autodesk Revit","details":"The drawing room was visible with the selected component preview spanning the seating area."},{"start_s":18725.636,"end_s":18738.52,"action":"Clicked the selected furniture component, pressed Escape repeatedly, scrolled and middle-clicked to adjust the view, entered “cm,” and zoomed out to review the broader floor plan.","intent":"Finalize or review the furniture component placement across the floor plan.","app":"Autodesk Revit","details":"The final view showed the drawing room furniture arrangement and a zoomed-out apartment plan."},{"start_s":18738.52,"end_s":18743.089,"action":"Switched to Autodesk Revit and scrolled through the open component/type list, then clicked near its lower-left area.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible behind the open list."},{"start_s":18743.089,"end_s":18756.021,"action":"Selected the “Conjunto Estar Sofás” furniture type, returned focus to the floor plan, and zoomed in toward the living room and kitchen area.","intent":"Prepare a sofa set for placement or inspection in the floor plan.","app":"Autodesk Revit","details":"The selected furniture type appeared in the Properties panel while the view zoomed toward the living room."},{"start_s":18756.021,"end_s":18766.291,"action":"Pressed Escape several times, clicked the view control, switched from Floor Plan: GL to the {3D} view, and adjusted the view with scroll and middle-button navigation.","intent":"Exit the current placement state and inspect the model in 3D.","app":"Autodesk Revit","details":"The 3D view opened in Temporary Hide/Isolate mode."},{"start_s":18766.291,"end_s":18776.016,"action":"Navigated the isolated 3D model with repeated middle-button clicks and scrolls, orbiting and zooming across the building interior until furnished rooms were visible.","intent":"Inspect the building’s interior furnishings and layout in 3D.","app":"Autodesk Revit","details":"The view moved from a broad building overview to a closer furnished living and dining area."},{"start_s":18776.016,"end_s":18792.355,"action":"Continued orbiting and zooming through the isolated 3D model, then switched back to Floor Plan: GL and zoomed toward the balcony area while the component placement context remained active.","intent":"Compare the 3D arrangement with the floor plan and position a component near the balcony.","app":"Autodesk Revit","details":"The floor plan ended focused on the wide balcony with a furniture placement outline visible."},{"start_s":18792.355,"end_s":18806.565,"action":"Scrolled through the component/type list while keeping the zoomed balcony plan visible, browsing entries such as tables, cooktops, refrigerators, parking bays, and planting types.","intent":"Browse alternative component types for placement.","app":"Autodesk Revit","details":"The component list remained open over the balcony area; no confirmed placement was shown."},{"start_s":18806.565,"end_s":18818.464,"action":"Scrolled and zoomed the GL floor plan while placing a refrigerator component, then clicked and adjusted the view around the kitchen and living area.","intent":"Position or inspect a refrigerator component in the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Component mode; the view changed from a close kitchen view to a wider living/kitchen view."},{"start_s":18818.464,"end_s":18828.186,"action":"Scrolled and zoomed into the balcony area, then selected a sofa component and clicked in the plan to place or position it.","intent":"Place a sofa component on the balcony.","app":"Autodesk Revit","details":"The selected family was Santiago_Sofa_6480 (1) / Santiago_Sofa_6399, and the final view showed a sofa placement outline on the balcony."},{"start_s":18828.186,"end_s":18839.368,"action":"Opened the component type search and scrolled through available families and recent types, moving from general furniture and appliance entries to additional fixture and support types.","intent":"Browse component families for a suitable object to place.","app":"Autodesk Revit","details":"The component search list visibly included refrigerator, parking, tree, elevator, support, termination, and disabled WC types."},{"start_s":18839.368,"end_s":18858.476,"action":"Placed or adjusted a sofa on the balcony, clicked around the balcony and nearby door area, and repeatedly pressed Escape while resizing and repositioning the Revit window.","intent":"Position the sofa component and exit placement or selection states.","app":"Autodesk Revit","details":"The selected family was LR1996_SILLON_ESEDRA; the sofa and placement graphics remained visible on the balcony."},{"start_s":18858.476,"end_s":18868.013,"action":"Selected the floor-plan raster image, zoomed out, then selected the balcony furniture and manipulated the Revit window and view.","intent":"Inspect the floor plan and select balcony furniture for further editing.","app":"Autodesk Revit","details":"The raster image properties showed a foreground image; the later view showed a selected gray chair/sofa object on the balcony beside another sofa."},{"start_s":18868.013,"end_s":18878.16,"action":"Selected the balcony chair, entered rotate mode, clicked to set the rotation center and axis, and rotated the chair to a new angled orientation.","intent":"Adjust the orientation of the balcony chair.","app":"Autodesk Revit","details":"The selected LR1996_SILLON_ESEDRA chair changed from a roughly upright orientation to a diagonal orientation beside the other sofa."},{"start_s":18878.16,"end_s":18887.617,"action":"Adjusted the selected LR1996_SILLON_ESEDRA furniture element in the Revit floor plan, using clicks, escape presses, and window resizing while keeping the element selected.","intent":"Modify or position the selected furniture element in the floor plan.","app":"Autodesk Revit","details":"The selected furniture remains highlighted in the balcony area."},{"start_s":18887.617,"end_s":18896.423,"action":"Exited the prior selection state, clicked and navigated the floor plan, and zoomed out to show a larger portion of the layout.","intent":"Review the furniture placement in the broader floor plan context.","app":"Autodesk Revit","details":"The view changes from the close balcony area to a wider plan view."},{"start_s":18896.423,"end_s":18905.285,"action":"Zoomed and navigated across the GL floor plan, moving from the balcony area to the dining and living rooms and then to a wider building overview.","intent":"Inspect the overall floor-plan arrangement and furniture layout.","app":"Autodesk Revit","details":"The final view shows the dining and living areas within a much larger portion of the plan."},{"start_s":18905.285,"end_s":18922.626,"action":"Paused on the zoomed-out floor plan while the view remained stable; a tooltip for the Paste from Clipboard control appeared and an outdoor-flooring region was highlighted.","intent":"Review the current floor-plan view without making a confirmed edit.","app":"Autodesk Revit","details":"No confirmed placement or paste action is visible."},{"start_s":18922.626,"end_s":18935.905,"action":"Scrolled and navigated the floor plan, then typed a short command and entered Place Component mode with the LR1996_SILLON_ESEDRA furniture type active.","intent":"Prepare to place a furniture component in the floor plan.","app":"Autodesk Revit","details":"The interface switches to Modify | Place Component and shows a furniture placement preview."},{"start_s":18935.905,"end_s":18945.086,"action":"Opened and scrolled the Revit component type list while remaining in Place Component mode, browsing furniture and other available families without placing an instance.","intent":"Search for a component type to place.","app":"Autodesk Revit","details":"The type selector displays entries including LR1996_SILLON_ESEDRA, appliances, furniture, and generic models."},{"start_s":18945.086,"end_s":18960.015,"action":"Scrolled through the Revit component-selection list while the floor plan remained visible, then pressed Escape.","intent":"Review available component families without placing one.","app":"Autodesk Revit","details":"The component list showed items including Sink, Support_Metal_Circular, Termination_Wood_Rectangular, and WC_-_Disabled."},{"start_s":18960.015,"end_s":18975.706,"action":"Returned to the Revit floor plan, switched briefly to Windows Explorer, then navigated and zoomed the plan with scrolling and middle-button clicks; resized or moved the Revit window and clicked in the plan.","intent":"Navigate and inspect different areas of the floor plan.","app":"Autodesk Revit","details":"The view changed from a closer furnished plan to a wider overall floor-plan view."},{"start_s":18975.706,"end_s":18983.323,"action":"Selected the raster image in the floor plan, scrolled and zoomed into the kitchen and utility area, then clicked the Insert and Annotate-related ribbon controls.","intent":"Inspect the raster underlay and access editing or annotation tools.","app":"Autodesk Revit","details":"The raster image remained selected while the view centered on the kitchen, sink, stove, and utility area."},{"start_s":18983.323,"end_s":18993.338,"action":"Opened the Family Category and Parameters dialog, typed a filter character, clicked dialog controls, and returned to the project view; then selected ribbon tools and opened another command or dialog.","intent":"Configure or inspect family-category settings before creating an element.","app":"Autodesk Revit","details":"The dialog displayed a searchable family-category list with categories such as Abutments, Air Terminals, and Columns."},{"start_s":18993.338,"end_s":19004.219,"action":"Entered Create Extrusion mode and drew or adjusted a magenta rectangular extrusion boundary around the kitchen counter area, zooming in while placing the sketch points.","intent":"Create an extrusion profile over the kitchen plan area.","app":"Autodesk Revit","details":"The extrusion sketch remained active with the Draw tools visible and the status prompting for the starting point of a rectangle."},{"start_s":19004.219,"end_s":19013.641,"action":"Entered extrusion dimensions of 4 feet and 4.25 feet into the active sketch inputs, confirming each value with Enter.","intent":"Set dimensional constraints for the extrusion geometry.","app":"Autodesk Revit","details":"The extrusion profile was highlighted in magenta around the sink and adjacent counter areas."},{"start_s":19013.641,"end_s":19024.598,"action":"Returned to Autodesk Revit, restored the 3D view, and scrolled the model; left the selected extrusion visible in Temporary Hide/Isolate mode.","intent":"Review the isolated 3D model and selected extrusion.","app":"Autodesk Revit","details":"Project 11 3D view."},{"start_s":19024.598,"end_s":19044.034,"action":"Opened the Material Browser, scrolled through materials, searched for “hall,” selected the HALL result, and confirmed the dialog to return to Revit.","intent":"Find and assign the HALL material.","app":"Autodesk Revit","details":"Material Browser changed from Door - Glazing to HALL."},{"start_s":19044.034,"end_s":19053.579,"action":"Reviewed the 3D model with the HALL material shown in the Properties panel, then closed or exited the active material/editing state.","intent":"Verify the material assignment on the model.","app":"Autodesk Revit","details":"The isolated brick-walled model remained visible."},{"start_s":19053.579,"end_s":19065.97,"action":"Switched to the GL floor plan, navigated and scrolled the view, then activated component placement and selected a furniture family for placement.","intent":"Prepare to place a component in the GL floor plan.","app":"Autodesk Revit","details":"The floor plan displayed a kitchen and balcony; the selected family was LR1996_SILLON_ESEDRA."},{"start_s":19065.97,"end_s":19077.109,"action":"Opened the component type list, browsed available families, and selected Cook_Top_(2) 0915 x 500mm; positioned the view over the kitchen countertop area.","intent":"Choose a countertop component for placement.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Component mode."},{"start_s":19077.109,"end_s":19084.548,"action":"Opened the component list, selected the sink family “Fregadero - 3D - Evier,” and placed or previewed it on the kitchen counter near the cooktop.","intent":"Place a sink fixture in the kitchen plan.","app":"Autodesk Revit","details":"The selected plumbing fixture appeared on the left side of the countertop."},{"start_s":19084.548,"end_s":19097.865,"action":"Scrolled slightly, clicked in the Revit 3D view, and repositioned/resized the application window while the isolated cooktop remained visible.","intent":"Adjust the Revit view and window layout.","app":"Autodesk Revit","details":"3D view was in Temporary Hide/Isolate mode."},{"start_s":19097.865,"end_s":19107.639,"action":"Selected the cooktop specialty equipment, edited its elevation offset, and entered 1' before confirming the value.","intent":"Adjust the cooktop’s vertical placement.","app":"Autodesk Revit","details":"The selected Cook_Top (2) showed an offset from host of 0.508' after editing."},{"start_s":19107.639,"end_s":19116.069,"action":"Rotated the 3D view with middle-button actions and scrolled to inspect the selected cooktop from different angles.","intent":"Inspect the cooktop placement in the model.","app":"Autodesk Revit","details":"The view changed from a close wall view to a broader interior perspective."},{"start_s":19116.069,"end_s":19126.829,"action":"Pressed undo and escape commands several times, returning from the selected-element state to an unselected 3D view.","intent":"Revert or cancel the preceding model interaction.","app":"Autodesk Revit","details":"The final view showed the isolated brick-walled model without a selected element."},{"start_s":19126.829,"end_s":19137.412,"action":"Selected the cooktop again, edited its offset from host to 0.6', confirmed the entry, and scrolled/rotated to a wider 3D view.","intent":"Set and inspect the cooktop’s host offset.","app":"Autodesk Revit","details":"The selected cooktop displayed an offset from host of 0.600'."},{"start_s":19137.412,"end_s":19147.649,"action":"Rotated and zoomed the 3D view outward, then clicked near the Properties panel while leaving the cooktop selected.","intent":"Review the updated cooktop placement in the overall model.","app":"Autodesk Revit","details":"The view moved from a broad floor-plan perspective to a closer overhead view of the interior floor and walls."},{"start_s":19147.649,"end_s":19156.169,"action":"Edited the selected cooktop’s offset value, entered -1, and navigated the 3D view around the isolated kitchen area.","intent":"Adjust the cooktop’s elevation or offset and inspect its placement.","app":"Autodesk Revit","details":"The selected Specialty Equipment element remained visible in the isolated 3D view."},{"start_s":19156.169,"end_s":19166.46,"action":"Entered -4 in the selected element’s offset field, then orbited and zoomed the 3D view outward to inspect the model.","intent":"Further adjust the cooktop placement and review it within the building.","app":"Autodesk Revit","details":"The properties panel showed Offset from Host as -4.000 while the view expanded to show multiple rooms."},{"start_s":19166.46,"end_s":19176.765,"action":"Orbited, zoomed, and panned the 3D view around the isolated building, returning to a closer view of the kitchen and selected cooktop.","intent":"Inspect the adjusted cooktop in the surrounding model context.","app":"Autodesk Revit","details":"The selected cooktop was highlighted in cyan in the kitchen area."},{"start_s":19176.765,"end_s":19186.734,"action":"Exited the active selection state and navigated the 3D view, zooming and orbiting from a broader house view to a close wall and window view.","intent":"Review the model and reposition the 3D camera.","app":"Autodesk Revit","details":"The Properties panel changed to 3D View before the cooktop was selected again near the end of the span."},{"start_s":19186.734,"end_s":19197.146,"action":"Zoomed and orbited toward the kitchen, selected nearby wall geometry, then right-clicked and returned focus to the cooktop area.","intent":"Inspect relationships between the kitchen equipment and surrounding walls.","app":"Autodesk Revit","details":"The view showed the living room, door, countertop, cooktop, and TV area; a wall tooltip appeared during selection."},{"start_s":19197.146,"end_s":19207.248,"action":"Dismissed the context interaction, navigated and zoomed the 3D view, then selected the cooktop and dragged within the view to reposition or inspect it.","intent":"Refine or verify the cooktop’s placement in the kitchen.","app":"Autodesk Revit","details":"The final view showed the cooktop highlighted in cyan with the tooltip identifying Specialty Equipment: Cook_Top_(2) : 0915 x 500mm."},{"start_s":19207.248,"end_s":19218.056,"action":"Dragged and navigated the Revit 3D view, changing from a close-up of a selected cooktop to an overhead view of the kitchen and adjacent rooms.","intent":"Inspect the selected kitchen equipment and surrounding model context.","app":"Autodesk Revit","details":"Temporary Hide/Isolate mode remained active."},{"start_s":19218.056,"end_s":19228.559,"action":"Resized the Revit window, dragged to orbit or pan the 3D model, and clicked through the kitchen area, ending on a wider overhead view with the cooktop selected.","intent":"Reposition the 3D view and inspect kitchen equipment placement.","app":"Autodesk Revit","details":"The view moved from a close kitchen view to a broader floor overview."},{"start_s":19228.559,"end_s":19238.026,"action":"Clicked several model elements and edited a selected lavadora's Offset from Host field, entering 0; the washer remained highlighted in the utility area.","intent":"Adjust or verify the selected washing machine's host offset.","app":"Autodesk Revit","details":"The selected element was a Lavadora 3D washing machine."},{"start_s":19238.026,"end_s":19248.407,"action":"Edited the selected washing machine's Offset from Host field to 0.000, clicked another nearby fixture, and zoomed or navigated out to show more of the floor plan.","intent":"Set the fixture offset and review its placement in the wider model.","app":"Autodesk Revit","details":"The final view showed the utility room, living room, dining area, and adjacent rooms."},{"start_s":19248.407,"end_s":19259.338,"action":"Entered and confirmed 150mm, then navigated and zoomed the 3D view; selection changed to a plumbing fixture near the kitchen and the view ended in an angled room overview.","intent":"Modify a model dimension or property and inspect the resulting fixture context.","app":"Autodesk Revit","details":"The Properties palette switched from a generic 3D view to a selected plumbing fixture during the span."},{"start_s":19259.338,"end_s":19269.507,"action":"Selected a refrigerator or nearby plumbing fixture, entered 1 and confirmed it, then zoomed toward the kitchen; the final view showed the refrigerator and adjacent sink area with model geometry selected.","intent":"Inspect or adjust the selected kitchen fixture and its surrounding placement.","app":"Autodesk Revit","details":"The selected element was identified as a plumbing fixture, while the final close view centered on the refrigerator and sink."},{"start_s":19269.507,"end_s":19279.475,"action":"Entered 1.5' in the selected plumbing fixture's elevation field, then clicked and selected the countertop sink assembly in the 3D view.","intent":"Adjust the plumbing fixture elevation and inspect the resulting placement.","app":"Autodesk Revit","details":"The sink/countertop assembly became highlighted in the 3D view."},{"start_s":19279.475,"end_s":19287.982,"action":"Canceled the prior selection, selected the generic model, clicked the plumbing fixture elevation field, and entered 2'.","intent":"Modify the selected model's elevation-related placement.","app":"Autodesk Revit","details":"The generic model was briefly selected, then the plumbing fixture properties were shown with the elevation field active."},{"start_s":19287.982,"end_s":19297.788,"action":"Entered 2.5' in the plumbing fixture elevation field, then canceled and reviewed the updated sink geometry in the 3D view.","intent":"Raise the plumbing fixture and verify its revised position.","app":"Autodesk Revit","details":"The sink appeared elevated above the countertop, and the view was left with the fixture selected."},{"start_s":19297.788,"end_s":19307.862,"action":"Navigated the 3D view, selected the cooktop, and entered 2.5' in its elevation field before orbiting and zooming out.","intent":"Adjust the cooktop elevation and inspect its placement in the kitchen model.","app":"Autodesk Revit","details":"The cooktop was selected as Specialty Equipment and the view changed to a wider angled inspection."},{"start_s":19307.862,"end_s":19319.557,"action":"Selected the cooktop elevation field, entered 2', then entered 1.5' and used view navigation to inspect the cooktop from closer angles.","intent":"Test and refine the cooktop elevation in the kitchen model.","app":"Autodesk Revit","details":"The cooktop remained highlighted while its displayed elevation changed from 2.5' to 2' and then 1.5'."},{"start_s":19319.557,"end_s":19331.109,"action":"Orbited and zoomed the 3D view using middle-mouse navigation, moving from the kitchen area to a broad overhead view of the building interior.","intent":"Review the updated model context from multiple viewpoints.","app":"Autodesk Revit","details":"No property edits were made; the final view showed multiple rooms and walls from above."},{"start_s":19331.109,"end_s":19341.201,"action":"Scrolled and navigated the Revit 3D view, selected a balcony floor, and resized or repositioned the application window before cancelling the active command.","intent":"Inspect and adjust the 3D model view.","app":"Autodesk Revit","details":"Temporary Hide/Isolate was visible; the selected element was a floor labeled WIDE BALCONY."},{"start_s":19341.201,"end_s":19354.448,"action":"Switched to the GL floor plan, zoomed and navigated the view, then activated wall placement and positioned the view around the toilet and dining areas.","intent":"Prepare the GL floor plan for wall editing.","app":"Autodesk Revit","details":"The floor plan was blank while loading, then showed the M. TOILET and DINING areas with Place Wall active."},{"start_s":19354.448,"end_s":19359.269,"action":"Selected the Basic Wall W3 type, clicked points around the M. TOILET area, and previewed a wall segment with temporary dimensions.","intent":"Place or define a wall segment in the floor plan.","app":"Autodesk Revit","details":"A wall preview appeared along the right side of the toilet area."},{"start_s":19359.269,"end_s":19370.592,"action":"Cancelled the wall command, selected the placed wall, adjusted the view, and then selected the raster floor-plan image.","intent":"Review the wall placement and inspect the underlying floor-plan reference.","app":"Autodesk Revit","details":"The selected wall showed length and temporary dimension grips before the raster image became selected."},{"start_s":19370.592,"end_s":19376.833,"action":"Returned to the GL floor plan, cancelled the raster-image selection, zoomed the view, and switched into floor-plan editing around the toilet and dining areas.","intent":"Navigate the reference and model floor plan for further editing.","app":"Autodesk Revit","details":"The view changed from the rendered reference image to the model floor plan, with a toilet floor selected."},{"start_s":19376.833,"end_s":19381.959,"action":"Selected the Doors_Concept_ExtDbl 8' door type, activated Place Door, and opened its Type Properties dialog.","intent":"Review or configure the door type before placement.","app":"Autodesk Revit","details":"Type Properties showed the 8' door dimensions, including 8.000' width and 6.923' height."},{"start_s":19381.959,"end_s":19388.432,"action":"Renamed the door type from 8' to 4' in the Type Properties workflow and returned to the project view.","intent":"Create or select a 4-foot door type for placement.","app":"Autodesk Revit","details":"Doors_Concept_ExtDbl type properties were shown."},{"start_s":19388.432,"end_s":19398.264,"action":"Exited the type dialog and navigated the GL floor plan, zooming toward the bathroom and dining area while keeping the 4' door tool active.","intent":"Position the floor plan for door placement.","app":"Autodesk Revit","details":"The status bar indicated door placement mode."},{"start_s":19398.264,"end_s":19418.189,"action":"Canceled the active placement and switched from the GL floor plan to a 3D view, then navigated the model until a selected wall/opening area was visible.","intent":"Inspect the model in 3D before continuing edits.","app":"Autodesk Revit","details":"The 3D view showed Temporary Hide/Isolate and a highlighted wall/opening."},{"start_s":19418.189,"end_s":19433.08,"action":"Opened Load into Projects from the family editor, confirmed the project selection, dismissed the Family Already Exists prompt, and returned to the project 3D view with the plumbing fixture selected.","intent":"Load the edited plumbing fixture family into the project.","app":"Autodesk Revit","details":"The family was WC_-_Disabled, a Disabled Toilet Arrangement."},{"start_s":19433.08,"end_s":19449.536,"action":"Repeated the load-into-projects operation, dismissed the existing-family prompt, navigated the isolated 3D view, and opened the Load Autodesk Family dialog.","intent":"Load or locate another Autodesk family for the project.","app":"Autodesk Revit","details":"The final state was the Load Autodesk Family window."},{"start_s":19449.536,"end_s":19469.536,"action":"Remained idle while the Load Autodesk Family dialog displayed a loading spinner.","intent":"Wait for the Autodesk family browser to load.","app":"Autodesk Revit","details":"No interaction events were recorded."},{"start_s":19469.536,"end_s":19480.516,"action":"Clicked within the Load Autodesk Family dialog and scrolled through the family browser, moving from door results to a broader results view.","intent":"Browse available Revit families for a component to load.","app":"Autodesk Revit","details":"Load Autodesk Family dialog remained open; no family was visibly loaded."},{"start_s":19480.516,"end_s":19488.2,"action":"Selected the Furniture category in the family browser and scrolled through furniture thumbnails and results.","intent":"Narrow the family browser to furniture components.","app":"Autodesk Revit","details":"The dialog showed 113 results for Furniture."},{"start_s":19488.2,"end_s":19496.998,"action":"Scrolled extensively through the Furniture results, reviewing stools, tables, shelves, sofas, and other furniture families.","intent":"Review available furniture families before selecting one.","app":"Autodesk Revit","details":"No selection or load confirmation was visible during the browsing."},{"start_s":19496.998,"end_s":19509.689,"action":"Continued scrolling through furniture families, selected a furniture thumbnail, and initiated the load operation; the Downloading Families dialog reached 100%.","intent":"Select and download a furniture family for use in the project.","app":"Autodesk Revit","details":"The selected family remained in the furniture browser while downloading completed."},{"start_s":19509.689,"end_s":19523.678,"action":"Returned to the family browser, navigated within Furniture to Devices, selected a device family, and clicked Load, opening a new Downloading Families progress dialog.","intent":"Choose and begin downloading a device family.","app":"Autodesk Revit","details":"The new download dialog showed 4% progress near the end of the span."},{"start_s":19523.678,"end_s":19534.457,"action":"Switched to the GL floor plan, zoomed or scrolled the view, and placed the downloaded Furniture_TV_Plasma 42-inch component in the plan; the view displayed the component placement over the furnished room.","intent":"Place the selected TV family in the GL floor plan.","app":"Autodesk Revit","details":"Revit ended in Modify | Place Component mode with Furniture_TV_Plasma 42-inch selected."},{"start_s":19534.457,"end_s":19550.552,"action":"Activated Revit's Place Component mode for the Furniture_TV_Plasma 50\" family, entered placement-related keystrokes, and scrolled the floor plan toward the furniture area.","intent":"Prepare and position a furniture component in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with the TV furniture preview selected."},{"start_s":19550.552,"end_s":19554.995,"action":"Scrolled the Revit component list and reviewed available furniture families, including Furniture_Chair_Office, Furniture_Desk, and Furniture_TV_Plasma.","intent":"Browse component types before selecting a family.","app":"Autodesk Revit","details":"The component type list was open over the floor plan."},{"start_s":19554.995,"end_s":19564.952,"action":"Selected Furniture_Chair_Office, clicked in the floor plan to place or position its preview, then canceled placement and switched to the 3D view.","intent":"Attempt placement of an office chair and inspect the model in 3D.","app":"Autodesk Revit","details":"The 3D view opened after repeated Escape presses."},{"start_s":19564.952,"end_s":19576.506,"action":"Navigated the 3D view, selected the TV furniture, and edited its elevation value from 0.000' to 2' so the TV appeared above the desk.","intent":"Raise the TV component to the intended height.","app":"Autodesk Revit","details":"Temporary Hide/Isolate mode was active and the TV was selected above the desk."},{"start_s":19576.506,"end_s":19586.296,"action":"Changed the selected TV furniture elevation from 2' to 3', canceled transient commands, and adjusted the 3D view to review the result.","intent":"Refine the TV height and inspect its placement.","app":"Autodesk Revit","details":"The TV remained selected above the desk in the isolated 3D view."},{"start_s":19586.296,"end_s":19595.424,"action":"Rotated and scrolled the 3D view, selected the TV, and entered 3.5' in its elevation field.","intent":"Set the TV elevation to 3.5' and verify its placement from another angle.","app":"Autodesk Revit","details":"The final view showed the TV mounted above the desk, with the elevation field active."},{"start_s":19595.424,"end_s":19605.048,"action":"Exited the selected-furniture context, navigated the 3D model with scroll input, and resized the Revit window to show a wider house view.","intent":"Adjust the 3D view and workspace layout for model inspection.","app":"Autodesk Revit","details":"The view changed from a close-up of a TV and desk to a broader house model view."},{"start_s":19605.048,"end_s":19611.216,"action":"Scrolled and middle-clicked in the 3D view to navigate from the overall house toward the stair area, ending on a close-up of the stair and landing.","intent":"Inspect the building circulation and stair geometry.","app":"Autodesk Revit","details":"The stair assembly was visible and highlighted in the final view."},{"start_s":19611.216,"end_s":19620.929,"action":"Continued navigating the 3D view with scrolling and a middle-click, moving from the stair close-up to a distant overall building view.","intent":"Review the building model from different camera distances.","app":"Autodesk Revit","details":"The final view showed multiple building sections and stair cores."},{"start_s":19620.929,"end_s":19630.508,"action":"Middle-clicked and scrolled to reposition the 3D camera, then selected a railing element near the dining area.","intent":"Inspect the model layout and a railing component.","app":"Autodesk Revit","details":"The selected element was identified in the status area as a glass-panel-bottom-fill railing."},{"start_s":19630.508,"end_s":19644.811,"action":"Navigated the 3D view around the dining and adjacent rooms, switched to the GL floor plan, and scrolled within the plan before clicking in the left-side properties area.","intent":"Switch from 3D inspection to floor-plan review and prepare another selection or command.","app":"Autodesk Revit","details":"The title changed to Floor Plan: GL; the final screenshot showed a blank or unloaded plan canvas."},{"start_s":19644.811,"end_s":19655.963,"action":"Scrolled in the GL floor plan and opened the Place Component type selector, browsing the searchable furniture and equipment list without placing a visible component.","intent":"Choose a component family for placement in the floor plan.","app":"Autodesk Revit","details":"The selector showed Furniture_Chair_Office and search results including suite elevator closet and other families."},{"start_s":19655.963,"end_s":19667.343,"action":"Reactivated Autodesk Revit, resized and navigated the GL floor plan, then switched the visible selection from a placed component to the raster floor-plan image.","intent":"Inspect and adjust the active floor-plan view and selection.","app":"Autodesk Revit","details":"The GL floor plan and raster image were shown at different zoom levels."},{"start_s":19667.343,"end_s":19678.466,"action":"Activated Revit, zoomed and panned around the raster floor plan, entered placement mode, and navigated to the bedroom, lobby, and electrical-room area.","intent":"Position the view for component placement or inspection.","app":"Autodesk Revit","details":"The view ended focused on Bedroom-2, the Lobby, and the Electrical Room with a component placement cursor active."},{"start_s":19678.466,"end_s":19694.924,"action":"Switched to the 3D view, orbited or zoomed around the isolated bedroom model, then returned to the GL floor plan and adjusted the view around the lobby and drawing rooms.","intent":"Review the model in 3D and compare it with the floor plan.","app":"Autodesk Revit","details":"Temporary Hide/Isolate was visible in the 3D view before returning to the floor plan."},{"start_s":19694.924,"end_s":19700.243,"action":"Scrolled through the GL floor plan while keeping component placement active, then opened the recent/type selector list.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The selector displayed furniture types including Basic_workdesk_7034, chairs, desks, and sofas."},{"start_s":19700.243,"end_s":19708.475,"action":"Selected the Basic_workdesk_7034 component and zoomed into Bedroom-2 and the Lobby, leaving the desk preview attached to the placement cursor.","intent":"Prepare to place a work desk in the floor plan.","app":"Autodesk Revit","details":"The status bar indicated that a free instance was ready to place and rotate."},{"start_s":19708.475,"end_s":19719.678,"action":"Scrolled and zoomed across the floor plan while carrying the Basic_workdesk_7034 preview, then clicked in the bedroom area to position or inspect the intended placement.","intent":"Position the selected work desk within the bedroom layout.","app":"Autodesk Revit","details":"The view ended tightly zoomed on bedroom furniture and the adjacent bathroom; placement mode remained active."},{"start_s":19719.678,"end_s":19731.066,"action":"Scrolled and clicked within the Revit floor plan while placing a Basic_workdek_7034 furniture component, then moved between windows and left the plan zoomed out.","intent":"Position or place a furniture component in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained in Modify | Place Component mode."},{"start_s":19731.066,"end_s":19741.715,"action":"Scrolled through the floor plan, opened the component search/type list, and selected the Furniture_TV_Plasma 50\" type; the plan then showed the selected TV furniture element.","intent":"Choose a TV furniture family for placement or editing.","app":"Autodesk Revit","details":"The component search list displayed furniture types including Furniture_TV_Plasma 50\"."},{"start_s":19741.715,"end_s":19752.251,"action":"Zoomed and panned to the upper-right bedroom area, selected the TV furniture, and entered 2.5' in the active property field before confirming.","intent":"Adjust the selected TV furniture placement or elevation.","app":"Autodesk Revit","details":"The selected Furniture_TV_Plasma showed an elevation value being edited."},{"start_s":19752.251,"end_s":19762.723,"action":"Clicked the 3D view tab and waited for the model to load, switching from the floor plan to a temporary isolated 3D view of the furnished house.","intent":"Inspect the furniture and model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}; Temporary Hide/Isolate was active."},{"start_s":19762.723,"end_s":19772.818,"action":"Navigated the isolated 3D view by orbiting, zooming, and panning around the interior, moving from a broad house view toward the living room and TV area.","intent":"Inspect the interior model and verify the TV placement.","app":"Autodesk Revit","details":"The 3D view showed brick walls, doors, furniture, and a highlighted TV near a console."},{"start_s":19772.818,"end_s":19782.921,"action":"Continued orbiting and zooming through the isolated 3D model, moving from a close view of a room floor to a broader overhead view of the dining, living, kitchen, and bedroom areas.","intent":"Review the furnished interior from multiple 3D angles.","app":"Autodesk Revit","details":"Temporary Hide/Isolate remained active throughout the 3D navigation."},{"start_s":19782.921,"end_s":19791.059,"action":"Scrolled and clicked through the Revit model, then switched from the 3D view to the GL floor plan and adjusted the view around the bedroom and toilet area.","intent":"Navigate and inspect the project views.","app":"Autodesk Revit","details":"The GL floor plan became active after the view switch."},{"start_s":19791.059,"end_s":19802.385,"action":"Scrolled and clicked in the GL plan, switched to the 3D view, and zoomed out to show a broader portion of the furnished floor layout.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"The 3D view displayed multiple rooms, walls, furniture, and fixtures."},{"start_s":19802.385,"end_s":19811.176,"action":"Scrolled and clicked in the 3D model, switched back to the GL floor plan, and entered a component placement workflow with a Furniture_TV_Plasma family selected.","intent":"Return to the floor plan and prepare a furniture component for placement.","app":"Autodesk Revit","details":"The floor plan showed the furnished apartment layout and the Modify | Place Component context."},{"start_s":19811.176,"end_s":19822.058,"action":"Switched within Revit and selected the Furniture_Chair_Office component, then panned and zoomed the floor plan toward the lobby, drawing, and bedroom areas while keeping placement mode active.","intent":"Choose and position an office chair component for placement.","app":"Autodesk Revit","details":"The selected family was Furniture_Chair_Office, shown in the Properties panel."},{"start_s":19822.058,"end_s":19835.483,"action":"Zoomed and panned around the floor plan while previewing the chair component, pressed Escape several times, and opened the Load Autodesk Family dialog.","intent":"Stop or adjust component placement and browse available families.","app":"Autodesk Revit","details":"The floor plan ended near the dining and dressing areas before the family browser opened."},{"start_s":19835.483,"end_s":19845.851,"action":"Waited for the Load Autodesk Family dialog to populate, then reviewed the Furniture/Devices result and the broader family thumbnail catalog.","intent":"Browse Autodesk content for a furniture family.","app":"Autodesk Revit","details":"The dialog showed a search field, category filters, family thumbnails, and Load/Cancel controls."},{"start_s":19845.851,"end_s":19857.051,"action":"Clicked and scrolled through the Autodesk Load Autodesk Family browser, changing the displayed results from general content to Plumbing items.","intent":"Browse available plumbing families for loading into the Revit project.","app":"Autodesk Revit","details":"The browser showed 150 Plumbing results, including fixtures and connectors."},{"start_s":19857.051,"end_s":19872.327,"action":"Scrolled through the Plumbing family results, selected one item, and clicked Load; Revit opened a Downloading Families dialog showing 4% progress.","intent":"Select and download a plumbing family for placement in the project.","app":"Autodesk Revit","details":"One family was selected before loading began."},{"start_s":19872.327,"end_s":19882.505,"action":"Returned to the Revit floor plan, entered text, and scrolled while viewing the furnished plan around the M.TOILET and DINING areas.","intent":"Resume work in the floor plan after initiating the family download.","app":"Autodesk Revit","details":"The active view was Floor Plan: GL."},{"start_s":19882.505,"end_s":19893.095,"action":"Entered placement mode for a Plumbing_Fixtures_Shower_H... Metal_Shower_Head component and dragged across the floor plan near the M.TOILET room.","intent":"Prepare and position the downloaded shower-head family in the floor plan.","app":"Autodesk Revit","details":"The component was hosted on Level GL with elevation 0.000'."},{"start_s":19893.095,"end_s":19908.495,"action":"Edited the component elevation to 6' and continued placement adjustments near the M.TOILET room, after which Revit displayed a Warning window.","intent":"Set the shower-head placement height and attempt to place it in the plan.","app":"Autodesk Revit","details":"The Properties panel showed Elevation from Level changing to 6.000'."},{"start_s":19908.495,"end_s":19918.055,"action":"Pressed Escape repeatedly, clicked the plan, and switched to the 3D view; Revit displayed a warning that none of the created elements were visible in Floor Plan: GL View.","intent":"Exit placement mode and inspect the created element in another view after the visibility warning.","app":"Autodesk Revit","details":"The 3D view appeared blank while the warning remained visible."},{"start_s":19918.055,"end_s":19928.199,"action":"Navigated the Revit 3D view with repeated middle-button clicks and scroll gestures, changing from a closer room view to a wider overview of the building interior.","intent":"Inspect the 3D building model from different viewpoints.","app":"Autodesk Revit","details":"Temporary Hide/Isolate mode was visible."},{"start_s":19928.199,"end_s":19938.345,"action":"Entered text in the active Revit window, adjusted the window, selected the section box, and dragged within the 3D view to reposition or resize the box while zooming and panning.","intent":"Adjust the section box to control the visible portion of the model.","app":"Autodesk Revit","details":"The Section Boxes contextual tools and a large cyan section-box outline were visible."},{"start_s":19938.345,"end_s":19948.123,"action":"Navigated and zoomed into the 3D model, then clicked a plumbing fixture; the view focused on a shower-head fixture near interior walls and a dining area.","intent":"Inspect and select a plumbing fixture in the model.","app":"Autodesk Revit","details":"A Plumbing_Fixtures_Shower_Head element was selected in the final view."},{"start_s":19948.123,"end_s":19958.621,"action":"Edited the selected fixture's constraint value by entering 5' and confirming, changing the displayed elevation from about 6.492' to 5.000'; then scrolled the 3D view.","intent":"Set the shower-head elevation to a specific height.","app":"Autodesk Revit","details":"The Properties panel showed Elevation from Level GL at 5.000' after confirmation."},{"start_s":19958.621,"end_s":19968.474,"action":"Exited the fixture-editing context, navigated the 3D view through broad zoom and pan gestures, and clicked model geometry near a wall and door.","intent":"Review the updated model and inspect nearby building elements.","app":"Autodesk Revit","details":"The view alternated between a distant building overview and a close-up of walls and a door."},{"start_s":19968.474,"end_s":19982.896,"action":"Selected a property field, entered and confirmed a revised value beginning with 4 and ending with 3', then canceled or exited the edit and navigated to another room area before clicking the Load Family control.","intent":"Modify a model property and continue inspecting the building components.","app":"Autodesk Revit","details":"The final view showed another room cluster with windows, walls, doors, and a cabinet-like element."},{"start_s":19982.896,"end_s":19994.581,"action":"Opened Revit’s Load Autodesk Family dialog and browsed the Plumbing results by scrolling through the available family thumbnails.","intent":"Browse plumbing families for a suitable component.","app":"Autodesk Revit","details":"The dialog showed 150 Plumbing results and family thumbnails."},{"start_s":19994.581,"end_s":20008.278,"action":"Continued scrolling through the Plumbing family results, selected one family, and clicked Load; Revit displayed a Downloading Families dialog at 30%.","intent":"Select and load a plumbing family into the project.","app":"Autodesk Revit","details":"One family was visibly selected before downloading began."},{"start_s":20008.278,"end_s":20018.085,"action":"Waited for the family load to complete, returned to the GL floor plan, and adjusted the view while entering text into an active field.","intent":"Return to the project and prepare the floor-plan workspace.","app":"Autodesk Revit","details":"The view changed from 3D to Floor Plan: GL."},{"start_s":20018.085,"end_s":20028.122,"action":"Navigated the GL floor plan, switched to the 3D view, and selected a plumbing fixture in the bathroom area.","intent":"Inspect and select the loaded plumbing fixture in the model.","app":"Autodesk Revit","details":"The selected fixture appeared in the 3D bathroom view."},{"start_s":20028.122,"end_s":20037.641,"action":"Edited the selected plumbing fixture’s elevation field, entered 4', confirmed the value, and then navigated the 3D view.","intent":"Set the plumbing fixture elevation to 4 feet.","app":"Autodesk Revit","details":"The Properties panel showed the elevation field being edited and the fixture remained selected."},{"start_s":20037.641,"end_s":20045.688,"action":"Rotated and zoomed the 3D view around the selected bathroom fixture, then zoomed out to review the broader building model.","intent":"Inspect the fixture placement and overall model context.","app":"Autodesk Revit","details":"The view moved from a close-up of the sink fixture to an angled overview of the building."},{"start_s":20045.688,"end_s":20064.511,"action":"Adjusted and resized the Autodesk Revit window, briefly hid and restored it, scrolled the 3D view, and clicked near the lower-right edge.","intent":"Continue working in the Revit 3D model view.","app":"Autodesk Revit","details":"Displayed a furnished multi-room building model in 3D."},{"start_s":20064.511,"end_s":20081.142,"action":"Switched briefly through Windows Explorer and the recorder, then returned to Revit and navigated the 3D model with middle-clicks and scrolling, changing from an interior axonometric view to an exterior-facing view.","intent":"Inspect different areas and orientations of the building model.","app":"Autodesk Revit","details":"A wall was selected during navigation; the view ended on the brick exterior."},{"start_s":20081.142,"end_s":20089.213,"action":"Returned from a Windows notification to Revit and used middle-click navigation and scrolling to rotate the building from an exterior view toward a more top-down perspective.","intent":"Continue inspecting the model from different viewpoints.","app":"Autodesk Revit","details":"The model remained in the 3D View with walls and stairs visible."},{"start_s":20089.213,"end_s":20098.949,"action":"Scrolled and middle-click navigated the 3D view, zooming from a broad top-down building view into a closer interior view showing brick walls, doors, a dining table, and a television.","intent":"Examine interior rooms and furnishings in the model.","app":"Autodesk Revit","details":"The view ended centered on an interior dining/living area."},{"start_s":20098.949,"end_s":20109.473,"action":"Used middle-click navigation and repeated scrolling to pan and zoom across the building, moving from an exterior wall area to closer furnished rooms with tables, seating, televisions, and a balcony.","intent":"Inspect additional rooms and building elements.","app":"Autodesk Revit","details":"The 3D view showed multiple furnished rooms and exterior openings."},{"start_s":20109.473,"end_s":20119.099,"action":"Rotated and repositioned the 3D model with middle-clicks and a scroll, moving to a wider overhead view of the furnished floor plan and adjacent rooms.","intent":"Review the overall building layout from an elevated angle.","app":"Autodesk Revit","details":"The final view showed bedrooms, living and dining areas, doors, and surrounding walls."},{"start_s":20119.099,"end_s":20129.048,"action":"Navigated the Revit model with middle-clicks and scroll gestures, then switched from the 3D view to the GL floor plan and zoomed into the dining and toilet area.","intent":"Inspect the GL floor plan in detail.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - Floor Plan: GL."},{"start_s":20129.048,"end_s":20139.681,"action":"Scrolled and repositioned the GL floor plan, moving from a full-apartment overview to a closer view of the dining, drawing, living, kitchen, and utility areas.","intent":"Review different portions of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":20139.681,"end_s":20154.701,"action":"Continued panning and zooming across the GL floor plan, inspected the bedrooms and toilets, then zoomed out to show multiple apartment layouts and switched to Windows File Explorer.","intent":"Review the drawing and move to project files.","app":"Autodesk Revit","details":"The final event switched to Windows Explorer."},{"start_s":20154.701,"end_s":20158.857,"action":"Opened the Downloads folder in File Explorer and clicked among the visible Revit, image, and project files before returning to Autodesk Revit.","intent":"Locate or select a downloaded project file.","app":"Windows File Explorer","details":"The window title was Downloads - File Explorer."},{"start_s":20158.857,"end_s":20163.92,"action":"Displayed the Revit Model Upgrade dialog over the GL floor plan and waited while the upgrade process progressed from Autodesk Revit 2020 to Autodesk Revit 2025.","intent":"Upgrade the opened Revit model to the current version.","app":"Autodesk Revit","details":"The dialog stated that the model was being upgraded and advised saving it afterward."},{"start_s":20163.92,"end_s":20169.588,"action":"Waited through repeated Revit window resizing and visibility changes, then switched to the LR722_Conjunto_Cama family editor and displayed the 3D bed family.","intent":"Continue working with the loaded Revit family.","app":"Autodesk Revit","details":"The family editor showed the Load into Project control and a 3D furniture family view."},{"start_s":20169.588,"end_s":20180.456,"action":"Switched to Autodesk Revit showing the LR722_Conjunto_Cama 3D family view, then changed to the PROJECT 11 GL floor plan.","intent":"Navigate between Revit project and family views.","app":"Autodesk Revit","details":"The final view was loading with a dark drawing area after the title changed."},{"start_s":20180.456,"end_s":20195.7,"action":"Reviewed and navigated the PROJECT 11 GL floor plan with scrolling and view adjustments, then switched to Windows Explorer.","intent":"Inspect the floor plan and access project files.","app":"Autodesk Revit; Windows Explorer","details":"Revit displayed the furnished floor plan with bedrooms, lobby, dining, and drawing areas."},{"start_s":20195.7,"end_s":20200.436,"action":"Switched to Downloads, attempted to open a Revit file, dismissed the warning that furniture-sofa was saved in a newer Revit release, and returned to Downloads.","intent":"Attempt to open a downloaded Revit family or project file.","app":"Windows Explorer; Autodesk Revit","details":"The warning stated that the file could not be opened in the current Revit release."},{"start_s":20200.436,"end_s":20204.635,"action":"Returned to Revit and opened the Wardrobe-Family 3D view, then interacted near the upper-right window controls.","intent":"Open and inspect the wardrobe family file.","app":"Autodesk Revit; Windows Explorer","details":"The Wardrobe-Family view loaded with a dark 3D canvas."},{"start_s":20204.635,"end_s":20215.041,"action":"Displayed the Load into Projects dialog, confirmed loading into PROJECT 11, returned to the GL floor plan, and navigated the view while placing a Wardrobe-Family component.","intent":"Load the wardrobe family into the project for placement.","app":"Autodesk Revit","details":"The dialog listed open projects/families and PROJECT 11.rvt was selected; the floor plan then showed the Wardrobe - Small placement tool."},{"start_s":20215.041,"end_s":20232.541,"action":"Placed or adjusted the Wardrobe - Small component near the dress area, canceled placement prompts with Escape, and panned or zoomed around the floor plan before switching to the recorder.","intent":"Position the loaded wardrobe family in the project.","app":"Autodesk Revit; Screen recorder","details":"The floor plan remained in Modify | Place Component mode and later showed a wider multi-unit plan view."},{"start_s":20232.541,"end_s":20250.782,"action":"Returned to Autodesk Revit and adjusted the floor-plan view with clicks and scrolling, ending with the full plan visible and a raster image selected.","intent":"Inspect and reposition the Revit floor-plan content.","app":"Autodesk Revit","details":"The view changed from a close balcony area to a wider floor plan with the raster image selected."},{"start_s":20250.782,"end_s":20259.89,"action":"Selected the placed furniture in the balcony area, adjusted the view, and switched to the Insert ribbon while keeping the furniture element selected.","intent":"Inspect or prepare the selected furniture component for editing.","app":"Autodesk Revit","details":"The selected item was identified as furniture type LR2198_SILON_ELEVEN."},{"start_s":20259.89,"end_s":20269.519,"action":"Exited the active selection state, zoomed in on the balcony furniture, and selected the chair-like component for closer inspection.","intent":"Inspect the furniture placement and geometry in the floor plan.","app":"Autodesk Revit","details":"The component became highlighted in cyan and filled much of the balcony view."},{"start_s":20269.519,"end_s":20277.099,"action":"Zoomed and adjusted the floor-plan view around the highlighted balcony furniture, leaving the component selected near the lower-left balcony area.","intent":"Refine the view and inspect the selected furniture position.","app":"Autodesk Revit","details":"The furniture remained highlighted while the surrounding balcony and doorway became more visible."},{"start_s":20277.099,"end_s":20287.354,"action":"Entered a copy or placement operation for the selected furniture, adjusted the view, and left the component in a translucent placement state with a placement guide visible.","intent":"Duplicate or reposition the selected furniture component.","app":"Autodesk Revit","details":"The ribbon showed Copy and the selected object appeared translucent with alignment/placement guides."},{"start_s":20287.354,"end_s":20297.843,"action":"Changed from the GL floor plan to the {3D} view and waited for the view to load, after clicking through the view area and adjusting the display.","intent":"Review the model in three dimensions after editing the floor plan.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}; the final frame showed the loading indicator."},{"start_s":20297.843,"end_s":20307.452,"action":"Switched from Downloads in File Explorer to Autodesk Revit, then navigated the PROJECT 11 3D view with middle-mouse clicks and scrolling.","intent":"Inspect and adjust the Revit model view.","app":"Autodesk Revit","details":"The 3D model remained visible while the view was repositioned."},{"start_s":20307.452,"end_s":20314.07,"action":"Opened the GL floor plan, panned or zoomed around the layout, then switched back to the PROJECT 11 3D view and adjusted its orientation.","intent":"Compare the floor-plan layout with the 3D model.","app":"Autodesk Revit","details":"The GL plan showed furnished rooms before returning to an angled 3D view."},{"start_s":20314.07,"end_s":20324.263,"action":"Panned and zoomed the 3D view across the model, moving from a close bathroom area to a broader view of the dining and living spaces.","intent":"Inspect different areas of the 3D building model.","app":"Autodesk Revit","details":"No confirmed model edits were visible."},{"start_s":20324.263,"end_s":20334.936,"action":"Switched to the GL floor plan, zoomed and panned around the bathroom and dining area, and selected plumbing fixtures and other plan elements.","intent":"Inspect or select floor-plan components near the bathroom and dining area.","app":"Autodesk Revit","details":"The plan view showed a selected plumbing fixture with multiple-selection controls active."},{"start_s":20334.936,"end_s":20344.96,"action":"Continued working in the GL floor plan, using clicks, panning, and escape presses to place or adjust a selected plan element near the dining area.","intent":"Position or inspect a floor-plan element.","app":"Autodesk Revit","details":"Temporary measurement or placement guides appeared around the selected element."},{"start_s":20344.96,"end_s":20354.64,"action":"Handled Revit warning dialogs, then zoomed and panned the GL floor plan and selected a raster image underlay.","intent":"Review the plan and work with its background reference image.","app":"Autodesk Revit","details":"The final view showed Raster Images selected with image dimensions and scale properties in the Properties panel."},{"start_s":20354.64,"end_s":20361.433,"action":"Switched to Autodesk Revit, dismissed active commands, and navigated the GL floor plan with scrolling and middle-button view movement.","intent":"Adjust the floor-plan view for continued work.","app":"Autodesk Revit","details":"The GL floor plan remained open, showing a raster-backed apartment layout."},{"start_s":20361.433,"end_s":20369.569,"action":"Entered Place Component mode, browsed the component list, and selected the LR722_Conjunto_Cama bed family for placement.","intent":"Prepare a bed component for insertion into the floor plan.","app":"Autodesk Revit","details":"The component browser showed furniture families and the selected bed preview."},{"start_s":20369.569,"end_s":20377.551,"action":"Scrolled and zoomed out while previewing the selected bed component, then repositioned the view over the apartment layout and bed rooms.","intent":"Navigate to a suitable placement area for the bed.","app":"Autodesk Revit","details":"The selected bed remained active in Place Component mode and its preview appeared in the plan."},{"start_s":20377.551,"end_s":20388.831,"action":"Clicked in the floor plan and continued zooming and panning around the bedrooms; pressed Escape to exit the active placement operation.","intent":"Inspect the bed placement area and stop component placement.","app":"Autodesk Revit","details":"The view moved from a wider apartment layout to a close-up of the bedroom furniture."},{"start_s":20388.831,"end_s":20397.964,"action":"Zoomed and panned across the GL floor plan, then selected the 3D view tab.","intent":"Switch from the floor plan to a three-dimensional model view.","app":"Autodesk Revit","details":"The title changed to Autodesk Revit 2025.4 - PROJECT 11 - 3D View: {3D}."},{"start_s":20397.964,"end_s":20410.977,"action":"Displayed the 3D model and used middle-button navigation to rotate the apartment from a top view to an angled perspective.","intent":"Inspect the apartment model in 3D.","app":"Autodesk Revit","details":"The final view showed an angled overview of rooms, walls, doors, and furniture."},{"start_s":20410.977,"end_s":20420.558,"action":"Navigated the Revit 3D view with middle-button clicks and scrolling, then repositioned the window and left the model showing a wider overhead view of the furnished building.","intent":"Inspect the building model from different 3D viewpoints.","app":"Autodesk Revit","details":"The view changed from a close-up of a closet and seating area to a broader top-down building view."},{"start_s":20420.558,"end_s":20430.665,"action":"Navigated the 3D model with scrolling and middle-button movements, then selected the GL floor-plan tab to switch from the 3D view to the Floor Plan: GL view.","intent":"Review the building layout in plan view.","app":"Autodesk Revit","details":"The title changed to Floor Plan: GL and displayed labeled rooms, furniture, and circulation areas."},{"start_s":20430.665,"end_s":20440.849,"action":"Scrolled and panned across the GL floor plan to inspect different rooms, then adjusted the Revit window and continued navigating the plan.","intent":"Inspect additional areas of the floor plan.","app":"Autodesk Revit","details":"The visible plan shifted across bedrooms, bathrooms, dining, living, kitchen, lobby, and drawing rooms."},{"start_s":20440.849,"end_s":20450.55,"action":"Returned focus to Revit, selected a raster image underlay in the GL floor plan, and scrolled/panned across the image while adjusting the window.","intent":"Review or position the raster floor-plan underlay.","app":"Autodesk Revit","details":"The contextual Modify | Raster Images ribbon and raster-image properties were visible; the underlay view moved to another furnished area."},{"start_s":20450.55,"end_s":20459.943,"action":"Issued several keyboard inputs and navigated the floor plan with scrolling; briefly selected a furniture chair, then continued moving the view across bedrooms and adjacent rooms.","intent":"Inspect floor-plan furniture and room placement.","app":"Autodesk Revit","details":"A Furniture_Chair_Office element was selected briefly, with temporary dimensions visible before the view shifted."},{"start_s":20459.943,"end_s":20476.517,"action":"Navigated and zoomed across the GL floor plan with repeated scrolling and middle-button movements, then selected the raster image and left the view zoomed out over the dining, living, bedroom, and surrounding layout.","intent":"Review the overall floor-plan composition and underlay alignment.","app":"Autodesk Revit","details":"The final view showed a broader portion of the furnished plan with the raster image selected and its properties displayed."},{"start_s":20476.517,"end_s":20492.263,"action":"Returned to the Revit GL floor plan, panned and zoomed across the raster-backed residential layout, and clicked within the plan while keeping the raster image active.","intent":"Review the floor plan and adjust the visible area.","app":"Autodesk Revit","details":"Raster image selected in the GL floor plan; view changed from a lower-level room grouping to a broader multi-room layout."},{"start_s":20492.263,"end_s":20502.475,"action":"Scrolled and pressed Escape, then clicked the plan and selected a plumbing fixture; the view changed to a closer floor-plan area with a disabled toilet arrangement highlighted.","intent":"Select and inspect a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"Properties identified the selected element as WC_-Disabled, a Disabled Toilet Arrangement."},{"start_s":20502.475,"end_s":20511.411,"action":"Clicked in the plan and entered spacing, Tab, and space keystrokes while the floor plan remained zoomed on bedrooms and adjacent rooms.","intent":"Interact with the active Revit placement or constraint operation.","app":"Autodesk Revit","details":"A temporary 10.000' dimension and constraint graphics remained visible; no completed change was evident."},{"start_s":20511.411,"end_s":20521.592,"action":"Tabbed, scrolled, and clicked near the upper room boundary; Revit displayed temporary alignment graphics and then selected the disabled toilet arrangement in the adjacent room.","intent":"Position or inspect the plumbing fixture relative to nearby walls.","app":"Autodesk Revit","details":"The selected WC_-Disabled fixture appeared highlighted in cyan with temporary dimensions."},{"start_s":20521.592,"end_s":20534.895,"action":"Entered multiple keystrokes while the plumbing fixture remained selected, zoomed in around the toilet room, then zoomed back out and clicked the raster image to make it active.","intent":"Review the fixture area and return focus to the raster floor-plan image.","app":"Autodesk Revit","details":"The final view showed the broader GL plan with Raster Images selected and Draw Layer set to Background."},{"start_s":20534.895,"end_s":20542.599,"action":"Returned to the Revit GL floor plan, zoomed and panned from the broader layout into the bedroom, toilet, dining, and lobby area, and clicked within the plan.","intent":"Navigate and inspect another portion of the floor plan.","app":"Autodesk Revit","details":"Raster image remained selected; the final view centered on Toilet-1, Toilet-2, Bedroom-2, Dining, and Lobby."},{"start_s":20542.599,"end_s":20560.676,"action":"Switched to Revit, navigated the GL floor plan with scrolling and clicks, and changed the view from the overall raster floor-plan image to a zoomed bathroom area.","intent":"Inspect the GL floor plan and focus on the bathroom layout.","app":"Autodesk Revit","details":"Ended on a close-up of two adjacent bathroom spaces with floor-plan elements visible."},{"start_s":20560.676,"end_s":20579.251,"action":"Scrolled and clicked through the bathroom view, selecting visible plumbing and floor elements while panning or zooming; pressed Escape repeatedly to clear temporary selections or commands.","intent":"Inspect and select bathroom components in the floor plan.","app":"Autodesk Revit","details":"Ended with the bathroom area centered and a floor element selected."},{"start_s":20579.251,"end_s":20584.153,"action":"Selected bathroom floor or wall elements, opened the wall-type selection interface, and brought up the wall type list while the central partition was highlighted.","intent":"Prepare to modify the selected bathroom partition wall.","app":"Autodesk Revit","details":"Wall modification context was active with a Basic Wall type list visible."},{"start_s":20584.153,"end_s":20594.107,"action":"Clicked successive locations on the central bathroom partition, canceling and reselecting elements until a curtain wall segment was selected and its properties were shown.","intent":"Inspect or adjust the bathroom partition wall type and placement.","app":"Autodesk Revit","details":"Selected element was identified as Curtain Wall: Curtain_Wall-Empty."},{"start_s":20594.107,"end_s":20605.353,"action":"Scrolled around the bathroom plan, entered Place Wall mode, positioned a curtain-wall segment across the partition area, then switched into Place Component mode and selected the LR722_Conjunto_Cama family.","intent":"Add or position a wall and then prepare to place a furniture component.","app":"Autodesk Revit","details":"The view showed the placed wall geometry and the component placement tool active."},{"start_s":20605.353,"end_s":20613.821,"action":"Scrolled extensively through the floor plan while keeping Place Component active, opened the component type browser, and browsed available furniture and plumbing fixture families, ending with Plumbing_Fixtures_Sink_Cloakroom previewed.","intent":"Choose a component family for placement in the floor plan.","app":"Autodesk Revit","details":"Component browser displayed fixture and furniture types; no placement was visibly completed."},{"start_s":20613.821,"end_s":20622.681,"action":"Entered a 4-foot elevation value while placing the selected plumbing sink fixture, then adjusted the Revit window and clicked in the plan.","intent":"Position the plumbing fixture at the specified elevation.","app":"Autodesk Revit","details":"The selected Plumbing_Fixtures_Sink_Cloakroom instance shows Elevation from Level GL = 4.000'."},{"start_s":20622.681,"end_s":20632.744,"action":"Clicked around the selected sink fixture and pressed Escape several times, then clicked the plan and ribbon to exit placement and leave the fixture selected.","intent":"Finalize or inspect the fixture placement.","app":"Autodesk Revit","details":"The fixture remains selected in the GL floor plan; properties show Elevation from Level GL = 4.492' and Offset from Host = 4.000'."},{"start_s":20632.744,"end_s":20642.644,"action":"Exited the fixture selection, clicked the plan and navigated the view, then activated Place Wall and positioned the wall-drawing cursor near the right bathroom.","intent":"Begin adding a wall element in the floor plan.","app":"Autodesk Revit","details":"The view zooms out to show two bathrooms, and the ribbon changes to Modify | Place Wall with Curtain Wall selected."},{"start_s":20642.644,"end_s":20651.996,"action":"Continued the wall command by clicking successive points along the right bathroom, previewing a vertical and then horizontal curtain-wall segment with temporary dimensions.","intent":"Lay out curtain-wall segments around the bathroom area.","app":"Autodesk Revit","details":"Curtain Wall / Curtain_Wall-Empty is active; temporary dimensions and an endpoint marker are visible."},{"start_s":20651.996,"end_s":20661.568,"action":"Pressed Escape to leave the prior wall operation, navigated to another bathroom area, and clicked to reactivate Place Wall and position a new wall endpoint.","intent":"Continue wall placement in the adjacent bathroom layout.","app":"Autodesk Revit","details":"The view shifts to a larger bathroom; the final screenshot shows Modify | Place Wall with a curtain-wall preview and temporary dimensions."},{"start_s":20661.568,"end_s":20677.262,"action":"Clicked to continue the wall placement, pressed Escape, zoomed and panned across the floor plan with middle-mouse navigation, then switched back to the component placement context and selected the plan.","intent":"Review the updated bathroom layout and return to component placement.","app":"Autodesk Revit","details":"The view ends zoomed out over multiple bathrooms and bedrooms, with Modify | Place Component active and the sink fixture type shown in Properties."},{"start_s":20677.262,"end_s":20683.676,"action":"Scrolled through the Revit component browser and switched into the PROJECT 11 floor plan, leaving the Place Component tool active with plumbing fixture families visible.","intent":"Review available component types before placing a fixture.","app":"Autodesk Revit","details":"Floor Plan: GL; component browser showed plumbing fixtures and recently used types."},{"start_s":20683.676,"end_s":20693.74,"action":"Selected the Plumbing_Fixtures_Shower_Head family, navigated and zoomed the floor plan, then entered a 4-foot placement value while positioning the fixture near the bathroom area.","intent":"Position a shower-head component at a specified elevation or offset.","app":"Autodesk Revit","details":"The selected family was Plumbing_Fixtures_Shower_Head, Metal_Shower_Head."},{"start_s":20693.74,"end_s":20707.66,"action":"Continued placing shower-head instances by selecting locations, entering 3-foot and 4-foot values, and navigating the plan; opened a Revit warning about created elements not being visible in the current floor-plan view.","intent":"Place additional shower-head fixtures with specified offsets.","app":"Autodesk Revit","details":"The plan view showed multiple bathroom areas and selected fixture properties with changing elevation offsets."},{"start_s":20707.66,"end_s":20712.714,"action":"Clicked several positions in the floor plan to place or position the active shower-head component, then triggered the visibility warning again.","intent":"Continue fixture placement across the bathroom and adjacent bedroom area.","app":"Autodesk Revit","details":"Warning stated that some created elements were not visible in Floor Plan: GL."},{"start_s":20712.714,"end_s":20722.773,"action":"Pressed Escape repeatedly to exit placement and dismiss the warning, switched from the GL floor plan to the 3D view, and navigated the model with middle-click and scroll controls.","intent":"Exit the placement workflow and inspect the resulting fixtures in 3D.","app":"Autodesk Revit","details":"Title changed to PROJECT 11 - 3D View: {3D}; the model showed bathrooms, doors, and interior walls."},{"start_s":20722.773,"end_s":20732.764,"action":"Selected the shower-head fixture in the 3D view, adjusted the view with scrolling and navigation, and ended on a wider angled overview of the bathrooms and bedroom.","intent":"Inspect the placed shower-head and surrounding model context.","app":"Autodesk Revit","details":"The selected Plumbing_Fixtures_Shower_Head was visible in the 3D model before the final overview."},{"start_s":20732.764,"end_s":20742.76,"action":"Navigated the Revit 3D model with middle-clicks and scroll gestures, then switched to the GL floor plan view.","intent":"Inspect the building model and open the GL floor plan.","app":"Autodesk Revit","details":"The view changed from an overhead furnished 3D model to a close GL floor-plan area."},{"start_s":20742.76,"end_s":20751.522,"action":"Returned to the 3D view and used middle-clicks and scroll gestures to orbit and reposition the building model.","intent":"Inspect the overall building layout from different 3D angles.","app":"Autodesk Revit","details":"The 3D view shifted from an angled whole-building view to a more top-down view."},{"start_s":20751.522,"end_s":20762.634,"action":"Waited in the Revit 3D view, then made a single scroll gesture that changed the camera to another exterior angle.","intent":"Continue reviewing the 3D model.","app":"Autodesk Revit","details":"The model remained visible with brick walls, rooms, windows, and a balcony."},{"start_s":20762.634,"end_s":20773.434,"action":"Navigated the 3D model with middle-clicks and scrolls, switched to the GL floor plan, and selected the raster image underlay.","intent":"Inspect the plan and activate the visible raster reference.","app":"Autodesk Revit","details":"The final view showed the GL floor plan with the raster image selected and image-editing controls active."},{"start_s":20773.434,"end_s":20784.758,"action":"Reactivated the Revit window, clicked within the selected raster image, and used middle-clicks and scroll gestures to pan or zoom the floor-plan reference.","intent":"Review and reposition the raster floor-plan reference.","app":"Autodesk Revit","details":"The raster image remained selected with its Draw Layer set to Foreground; the view shifted to show labeled bedrooms, toilets, dining, living, and kitchen areas."},{"start_s":20784.758,"end_s":20800.013,"action":"Continued panning and zooming the selected raster floor-plan image, briefly typed and dismissed a command entry, then switched focus back to the Revit window.","intent":"Inspect different areas of the raster floor-plan reference.","app":"Autodesk Revit","details":"The final view showed a closer portion of the apartment plan, including bedrooms, toilets, dining, drawing, kitchen, living, and balconies."},{"start_s":20800.013,"end_s":20809.195,"action":"Switched to Autodesk Revit, navigated the GL floor plan with scrolling and view changes, and selected or inspected floor-plan elements around the furnished apartment layout.","intent":"Review and navigate the Revit floor plan.","app":"Autodesk Revit","details":"The view changed from a raster-image overlay to a detailed floor-plan area."},{"start_s":20809.195,"end_s":20819.573,"action":"Scrolled and panned across the GL floor plan, moving from the apartment layout toward the balcony and schedule area, then zoomed into the balcony with two chairs.","intent":"Inspect the floor plan and balcony furniture placement.","app":"Autodesk Revit","details":"The view ended focused on a balcony with two chair objects and temporary selection dimensions."},{"start_s":20819.573,"end_s":20829.124,"action":"Continued scrolling and zooming around the floor plan, then clicked a door or furniture-related element and entered an active move or placement operation.","intent":"Navigate to and begin editing a floor-plan element.","app":"Autodesk Revit","details":"The view ended on a balcony and adjacent doors with a placement guide extending toward the cursor."},{"start_s":20829.124,"end_s":20839.894,"action":"Canceled the prior operation, selected the two-chair furniture group, and moved it away from the balcony into the open area to the right of the plan; then entered a rotate operation.","intent":"Reposition and adjust the balcony furniture group.","app":"Autodesk Revit","details":"The selected furniture displayed temporary distance dimensions and rotation controls."},{"start_s":20839.894,"end_s":20850.257,"action":"Rotated the selected furniture group through the rotation command and adjusted the selection, leaving multiple chair instances arranged around a central point.","intent":"Change the orientation and arrangement of the furniture.","app":"Autodesk Revit","details":"The furniture was shown in a new clustered arrangement outside the apartment footprint."},{"start_s":20850.257,"end_s":20861.964,"action":"Selected and manipulated individual chair instances, then zoomed or panned out to review their placement relative to the wider GL floor plan.","intent":"Refine furniture placement and inspect it in context.","app":"Autodesk Revit","details":"The final view showed the chairs as small objects beside the apartment layout, with one furniture element still selected."},{"start_s":20861.964,"end_s":20871.403,"action":"Adjusted the Revit floor-plan view, clicked near the furniture layout, and began moving a selected furniture element while temporary dimensions appeared.","intent":"Position furniture in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; two turquoise furniture objects are visible."},{"start_s":20871.403,"end_s":20881.704,"action":"Canceled the active operation, zoomed and panned across the floor plan, then selected a furniture object in the right-side apartment area.","intent":"Navigate to and select furniture for placement or adjustment.","app":"Autodesk Revit","details":"Selected element is identified in Properties as LR2198_SILLON_ELEVEN."},{"start_s":20881.704,"end_s":20891.844,"action":"Panned and zoomed around the plan, changed the view scale, and interacted with the selected furniture and nearby plan geometry while temporary alignment or dimension guides appeared.","intent":"Inspect and adjust furniture placement relative to the layout.","app":"Autodesk Revit","details":"Furniture remains selected in the GL floor plan."},{"start_s":20891.844,"end_s":20907.106,"action":"Reviewed the zoomed floor plan and navigated toward the upper apartment area, leaving the furniture objects visible above a wood-floored space and near an Extension label.","intent":"Inspect the furniture position and surrounding plan context.","app":"Autodesk Revit","details":"View remains on Floor Plan: GL; no confirmed placement change is visible."},{"start_s":20907.106,"end_s":20916.616,"action":"Canceled active commands, zoomed into the upper apartment labeled 3BHK 2001 Sft., and clicked the furniture objects above the wood-floored area, selecting one with temporary dimensions displayed.","intent":"Refine furniture placement in the upper apartment area.","app":"Autodesk Revit","details":"Selected furniture is shown above the apartment entry area."},{"start_s":20916.616,"end_s":20929.68,"action":"Opened the Modify | Furniture tools, clicked and dragged the selected furniture, then activated a rotate operation; a 90-degree rotation guide appeared around the furniture.","intent":"Rotate or reorient the selected furniture in the floor plan.","app":"Autodesk Revit","details":"The final view shows the furniture selected with a 90.00° rotation arc."},{"start_s":20929.68,"end_s":20942.304,"action":"Repositioned and resized the Revit window, then clicked the left chair-like furniture object, leaving it highlighted in the GL floor plan.","intent":"Select a furniture element for inspection or editing.","app":"Autodesk Revit","details":"GL floor plan shows two chair-like objects above a room labeled 3BHK 2001 Sft."},{"start_s":20942.304,"end_s":20952.258,"action":"Clicked the second chair-like object and then selected both objects together; zoomed the floor plan in while keeping the pair selected.","intent":"Select and frame the furniture pair.","app":"Autodesk Revit","details":"Both furniture objects are highlighted within a selection box."},{"start_s":20952.258,"end_s":20961.876,"action":"Zoomed and panned around the selected furniture and adjacent room, then clicked a nearby railing element, displaying temporary dimensions and selection geometry.","intent":"Inspect nearby model elements and their placement.","app":"Autodesk Revit","details":"Temporary dimensions and railing selection indicators appear around the room and furniture."},{"start_s":20961.876,"end_s":20971.97,"action":"Exited the temporary selection state, navigated the floor plan, and clicked furniture elements; ended with a single chair-like object selected and its Furniture properties visible.","intent":"Inspect a furniture instance in the floor plan.","app":"Autodesk Revit","details":"Properties identify the selected element as furniture type LR2198_SILION_ELEVEN."},{"start_s":20971.97,"end_s":20981.414,"action":"Zoomed out and panned across the floor plan, clicked surrounding model elements, and ended with two furniture instances selected while temporary dimensions were displayed.","intent":"Review furniture placement relative to the wider plan.","app":"Autodesk Revit","details":"The view expands to show more of the apartment plan and both furniture objects remain selected."},{"start_s":20981.414,"end_s":20991.122,"action":"Panned and zoomed to another apartment area labeled 3BHK 1992 Sft., moving the view from the selected furniture toward a wood-floored room and adjacent walls.","intent":"Navigate and inspect another portion of the floor plan.","app":"Autodesk Revit","details":"Final view focuses on the 3BHK 1992 Sft. area with temporary dimension geometry visible."},{"start_s":20991.122,"end_s":21000.406,"action":"Scrolled and clicked in the Revit floor plan, resulting in two furniture items appearing in the upper room; pressed Escape several times to exit the active operation.","intent":"Place or adjust furniture in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL; two chair-like furniture objects are visible and selected."},{"start_s":21000.406,"end_s":21010.442,"action":"Scrolled and panned across the floor plan, then clicked near the placed furniture and activated a measurement or placement operation showing temporary dimensions of approximately 28.499 and 12.72.","intent":"Inspect or position an element relative to the floor plan.","app":"Autodesk Revit","details":"Temporary dimension graphics and a selection boundary are visible."},{"start_s":21010.442,"end_s":21019.961,"action":"Panned and zoomed to another part of the plan, clicked an element, and left a temporary dashed selection boundary and measurement graphics visible; pressed Escape repeatedly.","intent":"Review or adjust an element in the floor plan.","app":"Autodesk Revit","details":"The view shows a room labeled 3BHK 2001 Sqft. and an active temporary measurement/selection state."},{"start_s":21019.961,"end_s":21030.236,"action":"Zoomed out to review much of the floor plan, then panned and zoomed back into the central area while clicking elements and pressing Escape to clear active operations.","intent":"Navigate and inspect the overall floor plan.","app":"Autodesk Revit","details":"A raster image underlay and multiple apartment layouts are visible."},{"start_s":21030.236,"end_s":21040.094,"action":"Panned and zoomed into another apartment area, clicked a railing or top rail element, and continued navigating before leaving a temporary selection or measurement boundary visible.","intent":"Inspect or select railing elements in the floor plan.","app":"Autodesk Revit","details":"Status text identifies a railing/top rail element; the view includes a 3BHK 1992 Sqft. label."},{"start_s":21040.094,"end_s":21050.116,"action":"Panned across the floor plan and scrolled to a labeled 3BHK 1711 Sqft. area, then clicked near the lower-left room and left an active vertical measurement or placement guide visible.","intent":"Inspect or position an element in the apartment layout.","app":"Autodesk Revit","details":"A temporary vertical guide with a 90-degree indicator and two furniture-like objects is visible."},{"start_s":21050.116,"end_s":21060.495,"action":"Exited the active furniture operation, adjusted the Revit view, and selected the pair of furniture elements in the floor plan.","intent":"Prepare the furniture elements for repositioning or editing.","app":"Autodesk Revit","details":"Floor Plan: GL; two turquoise furniture elements are selected."},{"start_s":21060.495,"end_s":21076.887,"action":"Rotated the selected furniture group using the on-canvas rotation control, changing the displayed angle from 100° to 90°.","intent":"Adjust the orientation of the selected furniture arrangement.","app":"Autodesk Revit","details":"The rotation arc and selected furniture group remain visible."},{"start_s":21076.887,"end_s":21086.356,"action":"Selected additional furniture elements and changed the arrangement from two items to a four-item grouping, then returned to the selection state.","intent":"Build or modify the furniture grouping in the floor plan.","app":"Autodesk Revit","details":"Four chair-like furniture elements are visible around the selected item."},{"start_s":21086.356,"end_s":21098.507,"action":"Selected furniture and adjusted its position relative to the adjacent room, with temporary distance measurements of approximately 7.599 and 10.275 visible.","intent":"Position the furniture elements at measured distances from the room or wall.","app":"Autodesk Revit","details":"The floor plan shows selected furniture beside the room and temporary dimensions."},{"start_s":21098.507,"end_s":21107.079,"action":"Completed the placement so the two furniture elements appear inside the narrow room or balcony area, and selected the adjacent glass-panel railing.","intent":"Place the furniture in the room and inspect the nearby railing element.","app":"Autodesk Revit","details":"The selected railing is identified on screen as a glass-panel railing."},{"start_s":21107.079,"end_s":21120.118,"action":"Exited the active selection or edit state, zoomed and panned out across the floor plan, and reviewed the overall layout containing the placed furniture.","intent":"Review the resulting furniture placement in the broader floor plan.","app":"Autodesk Revit","details":"The view ends zoomed out with room labels including 3BHK and the two furniture elements visible."},{"start_s":21120.118,"end_s":21128.641,"action":"Pressed Escape, clicked within the Revit floor plan, and scrolled to zoom into the labeled 3BHK layout and nearby rooms.","intent":"Inspect the floor plan at a closer scale.","app":"Autodesk Revit","details":"Floor Plan: GL remained open."},{"start_s":21128.641,"end_s":21138.976,"action":"Clicked and scrolled repeatedly to pan and zoom across the Revit floor plan, moving from a close room view to a broader multi-unit layout.","intent":"Review other areas of the floor plan.","app":"Autodesk Revit","details":"The view ended on a broader layout showing multiple apartment plans."},{"start_s":21138.976,"end_s":21149.871,"action":"Selected a Lavadora specialty-equipment element, then clicked and scrolled around it before leaving the element unselected in a zoomed bathroom-area view.","intent":"Inspect or position the specialty equipment in the plan.","app":"Autodesk Revit","details":"The selected element was identified as Lavadora, a 600mm x 590mm x 820mm specialty equipment item."},{"start_s":21149.871,"end_s":21159.389,"action":"Clicked and scrolled around the floor plan while manipulating the selected specialty-equipment endpoint, changing the view from a local room area to a wider plan region.","intent":"Adjust or inspect the equipment placement and surrounding geometry.","app":"Autodesk Revit","details":"Temporary measurement and endpoint graphics were visible near the equipment."},{"start_s":21159.389,"end_s":21171.598,"action":"Scrolled extensively to zoom out and clicked around the plan, ending with a broad view of multiple apartment layouts and temporary measurement lines.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"The view showed several units and a central corridor area."},{"start_s":21171.598,"end_s":21181.407,"action":"Pressed Space, scrolled and clicked around the lower-right portion of the plan, then zoomed out further while temporary angular and distance measurements remained visible.","intent":"Inspect geometry and measurements in the lower-right plan area.","app":"Autodesk Revit","details":"The final view showed the full multi-unit layout with measurement annotations."},{"start_s":21181.407,"end_s":21190.765,"action":"Rotated the selected lavatory equipment element in the GL floor plan, adjusting its orientation with the rotate control.","intent":"Orient the lavatory fixture in the floor plan.","app":"Autodesk Revit","details":"Selected specialty equipment remains active with a visible rotation arc."},{"start_s":21190.765,"end_s":21199.851,"action":"Selected the lavatory equipment and adjusted its position or dimensions using visible temporary dimensions, then initiated another rotation adjustment.","intent":"Refine placement and orientation of the lavatory fixture.","app":"Autodesk Revit","details":"Temporary dimensions and the selected cyan fixture are visible."},{"start_s":21199.851,"end_s":21209.413,"action":"Scrolled and manipulated the selected lavatory equipment, changing its placement and rotation as temporary dimensions and a rotation arc updated.","intent":"Continue positioning the lavatory fixture relative to nearby walls.","app":"Autodesk Revit","details":"The selected fixture remains in Modify | Specialty Equipment mode."},{"start_s":21209.413,"end_s":21219.809,"action":"Scrolled and zoomed the floor plan, then selected nearby wall geometry while bringing two cyan equipment elements into view inside the room.","intent":"Inspect and refine the equipment placement within the room.","app":"Autodesk Revit","details":"The view moves from the lower plan area to a closer room view with two cyan squares."},{"start_s":21219.809,"end_s":21230.932,"action":"Zoomed and panned across the floor plan, exited the active equipment manipulation, and selected the raster image overlay.","intent":"Navigate the plan and switch focus to the reference image.","app":"Autodesk Revit","details":"The raster image becomes selected; the view changes to a broader building plan."},{"start_s":21230.932,"end_s":21237.459,"action":"Activated the raster image and changed its draw layer from Background to Foreground, then zoomed or panned to reveal the furnished reference floor plan.","intent":"Display the reference image prominently for plan comparison.","app":"Autodesk Revit","details":"Raster Images properties show Draw Layer set to Foreground; the furnished 3BHK reference layout is visible."},{"start_s":21237.459,"end_s":21248.599,"action":"Reviewed the Revit GL floor plan raster image and clicked within the drawing area.","intent":"Inspect the floor plan image.","app":"Autodesk Revit","details":"Raster image remains selected in the GL floor plan view."},{"start_s":21248.599,"end_s":21265.666,"action":"Navigated the raster-backed GL floor plan with repeated middle-button clicks and scrolling, changing the zoom and visible area.","intent":"Inspect different areas of the floor plan.","app":"Autodesk Revit","details":"The view moved from a closer apartment layout to a broader portion of the plan."},{"start_s":21265.666,"end_s":21276.024,"action":"Switched between Revit states, scrolled the drawing, pressed Escape, resized or repositioned the window, and changed the view from the raster image to the modeled floor plan.","intent":"Exit the raster-image interaction and inspect modeled elements.","app":"Autodesk Revit","details":"The GL floor plan is shown with modeled walls and a selected lavatory fixture."},{"start_s":21276.024,"end_s":21286.75,"action":"Selected specialty equipment in the GL floor plan, navigated to the lavatory area, and initiated a rotate operation on the selected fixture.","intent":"Adjust or inspect the lavatory placement and orientation.","app":"Autodesk Revit","details":"Properties identify the selected element as a Lavadora specialty-equipment family; rotate mode is active."},{"start_s":21286.75,"end_s":21296.78,"action":"Zoomed and panned around the selected lavatory, clicked near the fixture and surrounding walls, and continued manipulating the selected element while the view updated.","intent":"Position or inspect the selected lavatory in the floor plan.","app":"Autodesk Revit","details":"Temporary dimensions and selection graphics are visible around the fixture; a WhatsApp notification briefly appeared."},{"start_s":21296.78,"end_s":21307.05,"action":"Dismissed the notification, returned to Revit, zoomed and panned around the lavatory, selected its endpoint and nearby wall references, and continued the placement or alignment operation.","intent":"Align or position the lavatory relative to nearby walls.","app":"Autodesk Revit","details":"The lavatory remains highlighted in the GL floor plan, with endpoint and temporary alignment graphics visible."},{"start_s":21307.05,"end_s":21317.592,"action":"Scrolled through the Revit floor plan, zooming out to show a broader layout, and clicked within the plan view.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":"Floor Plan: GL remained active."},{"start_s":21317.592,"end_s":21326.828,"action":"Scrolled and zoomed around the floor plan, clicked in the drawing area, and pressed Escape several times to clear or cancel the current interaction.","intent":"Inspect another area of the floor plan and exit an active operation.","app":"Autodesk Revit","details":"Plan view remained open with wall geometry visible."},{"start_s":21326.828,"end_s":21340.389,"action":"Panned and zoomed across the floor plan, then clicked an element; Revit switched to raster-image modification mode with the floor-plan image selected.","intent":"Navigate the plan and select the overlaid raster image.","app":"Autodesk Revit","details":"A raster image became selected and its image properties appeared in the Properties panel."},{"start_s":21340.389,"end_s":21353.328,"action":"Returned focus to Revit, clicked the selected raster image, entered a component-placement workflow, and typed “cm” while the view updated.","intent":"Begin placing or searching for a component in the floor plan.","app":"Autodesk Revit","details":"The contextual ribbon showed Modify | Place Component before the next span."},{"start_s":21353.328,"end_s":21358.079,"action":"Scrolled within the active Place Component workflow and opened the component/type search list, displaying furniture and plumbing fixture entries.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The list included Conjunto Mesa 01, sofa, cooktop, and plumbing fixture types."},{"start_s":21358.079,"end_s":21368.048,"action":"Scrolled and zoomed into the dining area, pressed Space, and clicked to position the selected Conjunto Mesa 01 furniture component over the dining table area.","intent":"Place and orient the selected dining table component in the floor plan.","app":"Autodesk Revit","details":"The dining, kitchen, bedroom, toilet, and balcony areas were visible; the selected furniture remained in placement mode."},{"start_s":21368.048,"end_s":21378.726,"action":"Scrolled and clicked within the floor plan while the Conjunto Mesa 01 component remained active, then pressed Escape repeatedly.","intent":"Navigate the plan and manage the active furniture placement command.","app":"Autodesk Revit","details":"The GL floor plan remained visible with the furniture component preview active."},{"start_s":21378.726,"end_s":21387.513,"action":"Adjusted the Revit window and zoomed into the GL floor plan, then clicked in the dining area to position the active furniture component.","intent":"Inspect and place the dining furniture more precisely.","app":"Autodesk Revit","details":"The view changed from a broader apartment plan to a close-up of the drawing and dining rooms."},{"start_s":21387.513,"end_s":21397.576,"action":"Pressed Escape, scrolled through the floor plan, clicked the dining furniture area, and zoomed in until the dining table filled the view.","intent":"Refine the furniture placement while inspecting the dining area.","app":"Autodesk Revit","details":"The active Conjunto Mesa 01 preview was shown over the dining table."},{"start_s":21397.576,"end_s":21408.741,"action":"Scrolled and clicked around the floor plan, navigating to another apartment dining area and zooming in on its table.","intent":"Compare or position the furniture component in another dining layout.","app":"Autodesk Revit","details":"The view showed a dining room labeled 17' 6\" x 12' 6\" with the furniture preview centered."},{"start_s":21408.741,"end_s":21417.861,"action":"Clicked twice on the dining table area while the Conjunto Mesa 01 component remained active.","intent":"Continue positioning or confirm the furniture component placement.","app":"Autodesk Revit","details":"No clear final placement change was visible beyond the repeated clicks."},{"start_s":21417.861,"end_s":21437.861,"action":"Remained on the zoomed-in dining area with the Conjunto Mesa 01 furniture selected; no further user interaction was recorded.","intent":"Review the selected furniture placement.","app":"Autodesk Revit","details":"The table and chairs were highlighted in blue, with temporary dimensions and an Extension tooltip visible."},{"start_s":21437.861,"end_s":21449.613,"action":"Scrolled the Revit floor plan, then pressed Escape repeatedly; the view changed from a close-up dining area with a selected furniture component to a zoomed-out raster floor plan.","intent":"Review the floor plan and exit the active component-placement or selection state.","app":"Autodesk Revit","details":"The app briefly hid and reappeared during the Escape presses."},{"start_s":21449.613,"end_s":21469.613,"action":"Scrolled the floor plan further out and left the zoomed-out raster image displayed.","intent":"Inspect the overall floor-plan layout.","app":"Autodesk Revit","details":null},{"start_s":21469.613,"end_s":21489.613,"action":"Remained idle while viewing the zoomed-out floor plan and thumbnail tab.","intent":"Pause to review the displayed plan.","app":"Autodesk Revit","details":null},{"start_s":21489.613,"end_s":21509.613,"action":"Remained on the zoomed-out floor plan; the system briefly reported idle, display, network, power, input-source, and memory-state changes before resuming.","intent":"Continue reviewing the plan without a recorded UI interaction.","app":"Autodesk Revit","details":"No direct user interaction was recorded."},{"start_s":21509.613,"end_s":21526.116,"action":"Scrolled the raster floor plan and middle-clicked the drawing, shifting the view to a closer view of the upper apartment area.","intent":"Navigate the plan to inspect a specific area.","app":"Autodesk Revit","details":null},{"start_s":21526.116,"end_s":21535.939,"action":"Middle-clicked and scrolled across the floor plan, then clicked the view area; Revit switched from the raster floor-plan tab to the {3D} view, which appeared blank while loading or displaying.","intent":"Navigate between plan content and the 3D view.","app":"Autodesk Revit","details":"The window title changed to Autodesk Revit 2025.4 - [PROJECT 11 - 3D View: {3D}]."},{"start_s":21535.939,"end_s":21546.217,"action":"Navigated within Autodesk Revit using middle-button clicks and scrolling, then switched from the 3D view to the GL floor plan.","intent":"Open and inspect the GL floor plan.","app":"Autodesk Revit","details":"The title changed to Autodesk Revit 2025.4 - [PROJECT 11 - Floor Plan: GL]."},{"start_s":21546.217,"end_s":21556.518,"action":"Scrolled and zoomed the GL floor plan, entered Place Component mode, and selected the Conjunto Mesa 01 furniture component for placement.","intent":"Prepare a furniture component for placement in the floor plan.","app":"Autodesk Revit","details":"The view zoomed into a dining table area and the status bar indicated that the component was ready to place."},{"start_s":21556.518,"end_s":21565.96,"action":"Scrolled around the dining area while keeping Conjunto Mesa 01 active, then pressed Escape repeatedly without placing the component.","intent":"Cancel or exit the active component-placement interaction.","app":"Autodesk Revit","details":"The dining furniture remained highlighted while Place Component mode stayed visible."},{"start_s":21565.96,"end_s":21576.643,"action":"Scrolled and navigated to another portion of the GL floor plan, typed unit-related input, and switched back to the active Revit window while retaining the component-placement context.","intent":"Inspect another floor-plan location and continue the placement workflow.","app":"Autodesk Revit","details":"The view ended focused on an M.BED ROOM, toilet, dining area, and balcony."},{"start_s":21576.643,"end_s":21590.92,"action":"Pressed Escape repeatedly and scrolled the floor plan, clearing the active placement selection and leaving the plan visible around the M.BED ROOM and dining area.","intent":"Exit the placement operation and review the floor plan.","app":"Autodesk Revit","details":"The component preview disappeared and the Properties panel returned to Floor Plan: GL."},{"start_s":21590.92,"end_s":21601.009,"action":"Scrolled and navigated across the GL floor plan, entered unit-related text, resized the Revit window, and clicked near the plan to leave the view zoomed out with a wall extension selected.","intent":"Inspect and adjust the floor-plan view.","app":"Autodesk Revit","details":"The final view showed multiple apartments and the floor schedule, with a wall extension highlighted in cyan."},{"start_s":21601.009,"end_s":21606.917,"action":"Scrolled through the Revit component/type list and clicked near the lower-left list area while the floor plan remained visible.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The component placement mode and type list were visible; no placement result was confirmed."},{"start_s":21606.917,"end_s":21618.418,"action":"Scrolled the floor plan, clicked in the kitchen area, and zoomed into the dining and kitchen region where a refrigerator component was selected.","intent":"Inspect and position the selected refrigerator component in the floor plan.","app":"Autodesk Revit","details":"The selected family was labeled LR2078_REFRIGERADOR_TWIN_COOLING_PLUS_SAMSUNG; the view ended zoomed in around the dining/kitchen area."},{"start_s":21618.418,"end_s":21626.634,"action":"Pressed Space, navigated by scrolling and clicking, then zoomed back out to review a broader portion of the floor plan.","intent":"Adjust or inspect the selected component placement across the plan.","app":"Autodesk Revit","details":"The refrigerator remained selected while the view changed from a close kitchen view to a wider multi-unit plan."},{"start_s":21626.634,"end_s":21636.344,"action":"Scrolled and clicked through the plan, moving from a wider view into a close-up around the pooja, dress, kitchen, and refrigerator area.","intent":"Continue positioning or inspecting the selected refrigerator near the kitchen layout.","app":"Autodesk Revit","details":"The view ended tightly focused on the refrigerator beside the kitchen counter."},{"start_s":21636.344,"end_s":21646.774,"action":"Middle-click navigated and zoomed the plan, pressed Space, then clicked and scrolled to reposition or inspect the refrigerator around the dining and kitchen area.","intent":"Place or refine the refrigerator component location.","app":"Autodesk Revit","details":"The status bar indicated placement mode with Space Bar to Rotate; the refrigerator remained selected and the view ended at a broader floor-plan view."},{"start_s":21646.774,"end_s":21655.098,"action":"Navigated across the floor plan with middle-clicks and scrolling, clicked the plan, and ended zoomed into a kitchen showing the refrigerator beneath a sofa-side wall.","intent":"Continue positioning or reviewing the refrigerator component in another kitchen area.","app":"Autodesk Revit","details":"The final view showed the selected kitchen region labeled 12' 0\" x 8' 0\" with the refrigerator visible."},{"start_s":21655.098,"end_s":21664.986,"action":"Scrolled and zoomed the Revit floor plan, moving from a close-up of the kitchen and utility area to a wider view of the apartment layout.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":null},{"start_s":21664.986,"end_s":21676.424,"action":"Scrolled and zoomed out across the GL floor plan, revealing both apartment units and the lower drawing/table area.","intent":"Inspect a broader portion of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":21676.424,"end_s":21686.139,"action":"Selected the raster image and interacted with Revit controls, then opened the Family Category and Parameters dialog with Generic Models selected.","intent":"Configure or inspect the category settings for a family or component.","app":"Autodesk Revit","details":"The Family Category and Parameters dialog was active at the end of the span."},{"start_s":21686.139,"end_s":21690.224,"action":"Confirmed the Generic Models category and opened the Name dialog, leaving the default name “Generic Models 2” selected.","intent":"Create or rename a generic model family.","app":"Autodesk Revit","details":"A Name dialog was visible with the default name selected."},{"start_s":21690.224,"end_s":21710.224,"action":"Remained in Revit with the floor plan visible while the interface settled; no substantive interaction was recorded.","intent":"Wait or review the current family-editing view.","app":"Autodesk Revit","details":null},{"start_s":21710.224,"end_s":21719.186,"action":"Scrolled the floor plan, pressed Escape several times, and clicked within the view; the display moved to a wider apartment-and-schedule view while remaining in the generic model editing context.","intent":"Navigate and exit or cancel active placement/editing operations while reviewing the plan.","app":"Autodesk Revit","details":"The final view showed a floor plan above a block schedule/table."},{"start_s":21719.186,"end_s":21726.848,"action":"Scrolled and tabbed through the Revit floor plan, then clicked a kitchen countertop generic model and selected it for editing.","intent":"Select a modeled kitchen element for modification.","app":"Autodesk Revit","details":"The selected Generic Model is visible with blue grips and the Modify | Generic Models context."},{"start_s":21726.848,"end_s":21736.116,"action":"Entered extrusion editing for the selected countertop model, then zoomed out and navigated across the floor plan while keeping the extrusion active.","intent":"Inspect the extrusion and its placement in the overall plan.","app":"Autodesk Revit","details":"Revit shows Modify | Extrusion with extrusion start/end values and the full apartment plan after zooming out."},{"start_s":21736.116,"end_s":21755.036,"action":"Zoomed and panned around the floor plan, clicked the countertop extrusion, and edited its sketch boundary around the kitchen worktop and stove area.","intent":"Adjust the extrusion sketch geometry to match the kitchen layout.","app":"Autodesk Revit","details":"The countertop sketch is highlighted in magenta near the kitchen, with sketch editing controls active."},{"start_s":21755.036,"end_s":21765.754,"action":"Pressed Escape repeatedly and entered sketch editing commands, then clicked several sketch vertices and lines to reshape the countertop boundary.","intent":"Correct overlapping or misaligned sketch lines.","app":"Autodesk Revit","details":"A Revit warning states that highlighted lines overlap and may not form closed loops."},{"start_s":21765.754,"end_s":21776.076,"action":"Panned and zoomed to another kitchen area, selected rectangle sketch tools, and began positioning a rectangular boundary around the sink countertop.","intent":"Create or refine a rectangular portion of the extrusion sketch.","app":"Autodesk Revit","details":"The view shows a kitchen labeled 12' 0\" x 8' 0\" with the countertop sketch highlighted and the status prompt to enter the rectangle's starting point."},{"start_s":21776.076,"end_s":21789.912,"action":"Continued panning and zooming through the kitchen sketch, clicked boundary points, and placed another rectangular segment along the countertop edge.","intent":"Extend the extrusion sketch across the kitchen counter layout.","app":"Autodesk Revit","details":"The sketch remains active with magenta boundary lines, and the final status prompt requests the rectangle's diagonal point."},{"start_s":21789.912,"end_s":21799.261,"action":"Pressed Escape repeatedly, entered a short text command, and clicked around the selected extrusion sketch while Revit displayed an overlap warning.","intent":"Attempt to edit or resolve the extrusion sketch geometry.","app":"Autodesk Revit","details":"Floor Plan: GL; warning stated that highlighted lines overlap and may not form closed loops."},{"start_s":21799.261,"end_s":21809.262,"action":"Navigated around the floor plan by scrolling and middle-clicking, zooming from the overall layout into the kitchen area and selecting sketch geometry.","intent":"Inspect the extrusion sketch and its surrounding floor-plan geometry.","app":"Autodesk Revit","details":"View moved from the apartment plan to a close-up of the kitchen, fridge, sink, and counter area."},{"start_s":21809.262,"end_s":21819.565,"action":"Panned and zoomed further around the kitchen and sink area, clicked sketch lines and endpoints, and left a temporary dimension visible.","intent":"Adjust or inspect the boundary lines of the extrusion sketch.","app":"Autodesk Revit","details":"Close-up showed magenta sketch boundaries around the counter/sink area and a temporary dimension of about 2.583."},{"start_s":21819.565,"end_s":21829.499,"action":"Scrolled out to review the broader floor plan, then zoomed and panned back toward the kitchen and selected a wall or boundary line.","intent":"Review the sketch location in the overall plan and continue geometry editing.","app":"Autodesk Revit","details":"The plan showed multiple rooms and the kitchen; the final close-up displayed the kitchen and adjacent pooja/toilet areas."},{"start_s":21829.499,"end_s":21844.704,"action":"Clicked and navigated around the kitchen and adjacent rooms, selecting and inspecting boundary segments while zooming between close and wider views; Revit then switched to a Warning window.","intent":"Continue editing the extrusion boundary and respond to the resulting warning.","app":"Autodesk Revit","details":"Views showed the pooja, kitchen, toilet, utility, and goods lift areas; the selected sketch remained highlighted."},{"start_s":21844.704,"end_s":21854.857,"action":"Returned to the Revit floor plan, pressed Escape repeatedly, entered a short command, and clicked sketch endpoints while the overlap warning remained visible; then adjusted the view with panning and scrolling.","intent":"Dismiss or exit the warning state and continue correcting overlapping extrusion lines.","app":"Autodesk Revit","details":"The highlighted magenta and blue sketch lines remained visible, with the warning stating that overlapping lines may not form closed loops."},{"start_s":21854.857,"end_s":21864.179,"action":"Clicked and navigated within the GL floor plan while editing an extrusion, zooming or panning from the overall plan into the kitchen and utility area and leaving a rectangle sketch active.","intent":"Refine or position an extrusion sketch in the floor plan.","app":"Autodesk Revit","details":"The view remained in Modify | Extrusion > Edit Extrusion mode."},{"start_s":21864.179,"end_s":21880.826,"action":"Continued editing the extrusion sketch in the kitchen, zooming and clicking around the counters and wall edges to define or adjust a rectangular profile; ended with a warning window active.","intent":"Complete or validate the kitchen-area extrusion profile.","app":"Autodesk Revit","details":"The sketch remained active and the final event switched to a Revit Warning window."},{"start_s":21880.826,"end_s":21898.107,"action":"Returned to the Revit floor plan, pressed Escape several times, navigated and zoomed across the GL plan, and left the extrusion-editing view with a project-not-saved warning appearing.","intent":"Exit or cancel the current sketch operation and review the project state.","app":"Autodesk Revit","details":"The floor plan was shown at a wider view before the Project Not Saved Recently window appeared."},{"start_s":21898.107,"end_s":21905.227,"action":"Dismissed or switched from the project warning, activated Place Component, and opened the component/family browser while the kitchen and utility area remained visible.","intent":"Prepare to place a component in the floor plan.","app":"Autodesk Revit","details":"The selected family shown was a Samsung refrigerator, and the browser displayed available recent families."},{"start_s":21905.227,"end_s":21915.305,"action":"Exited the component browser and navigated the floor plan by scrolling and clicking, moving from the kitchen and utility area toward the adjacent open-plan rooms; ended with an active placement or selection marker in the plan.","intent":"Position or inspect a component placement location.","app":"Autodesk Revit","details":"The view changed to the kitchen, utility, living, and balcony areas; no completed component placement is clearly visible."},{"start_s":21915.305,"end_s":21924.784,"action":"Continued panning and zooming across the GL floor plan from the lobby and living spaces to the dining, bedrooms, and kitchen, clicking within the plan while an active placement/selection crosshair remained visible.","intent":"Review or position the active element in another area of the floor plan.","app":"Autodesk Revit","details":"The final view showed the electrical room, drawing room, bedrooms, dining, and kitchen with the placement marker still active."},{"start_s":21924.784,"end_s":21934.543,"action":"Resized and repositioned the Revit window, scrolled through the GL floor plan, and clicked within the plan, ending on a close view of the dressing and pooja areas.","intent":"Inspect the GL floor plan at different zoom levels.","app":"Autodesk Revit","details":null},{"start_s":21934.543,"end_s":21944.867,"action":"Scrolled and repositioned the GL floor plan from a broader bedroom and dining view to a closer view of Bed Room-2, Pooja, Toilet-2, and the kitchen sink area.","intent":"Continue reviewing the floor plan layout.","app":"Autodesk Revit","details":null},{"start_s":21944.867,"end_s":21954.507,"action":"Clicked and scrolled to zoom out across the GL floor plan, then zoomed back into the kitchen and adjacent toilet area until an endpoint was highlighted near the sink.","intent":"Inspect and locate a plumbing-fixture endpoint in the plan.","app":"Autodesk Revit","details":"The view moved from the overall apartment layout to the kitchen sink and adjacent toilet."},{"start_s":21954.507,"end_s":21964.445,"action":"Scrolled and clicked around the floor plan, moving from the kitchen and bedroom overview to a closer dining, kitchen, utility, and toilet view.","intent":"Review the kitchen and utility area geometry.","app":"Autodesk Revit","details":null},{"start_s":21964.445,"end_s":21975.303,"action":"Resized the Revit window, selected the kitchen floor area, and dragged while the rotate tool was active, leaving the dining, kitchen, utility, and balcony region in view.","intent":"Manipulate or inspect the kitchen-area model view.","app":"Autodesk Revit","details":"The interface showed an active rotate operation and a selected kitchen floor element."},{"start_s":21975.303,"end_s":21982.836,"action":"Selected a kitchen plumbing fixture near the sink, pressed Escape, and switched from the GL floor plan to the {3D} view, which opened to a blank loading workspace.","intent":"Inspect the selected kitchen fixture in 3D.","app":"Autodesk Revit","details":"The selected fixture was identified as a Fregadero plumbing fixture hosted on the kitchen floor."},{"start_s":21982.836,"end_s":22000.894,"action":"Exited the transient interaction and left Autodesk Revit displaying an isometric 3D view of the furnished building model.","intent":"Review the building model in 3D.","app":"Autodesk Revit","details":null},{"start_s":22000.894,"end_s":22010.523,"action":"Navigated the 3D model with middle-clicks and repeated scrolls, moving from a broad building view into closer views of rooms, stairs, furniture, and doors.","intent":"Inspect model areas and interior elements.","app":"Autodesk Revit","details":"The view changed from an overall isometric layout to close-up interior views."},{"start_s":22010.523,"end_s":22020.597,"action":"Continued panning and zooming through the 3D model, inspecting rooms, corridors, stairs, furniture, and a highlighted interior element.","intent":"Continue reviewing interior model details.","app":"Autodesk Revit","details":null},{"start_s":22020.597,"end_s":22030.407,"action":"Navigated the model, then switched from the 3D view to the GL floor plan and zoomed or panned across the furnished apartment layout.","intent":"Review the GL floor plan and apartment arrangement.","app":"Autodesk Revit","details":"The displayed view changed to “Floor Plan: GL,” showing labeled rooms including dining, kitchen, bedrooms, toilets, and a balcony."},{"start_s":22030.407,"end_s":22040.887,"action":"Adjusted the Revit window and navigated the GL floor plan, zooming into the kitchen and utility area while interacting with model elements near the kitchen fixtures.","intent":"Inspect kitchen and utility-plan details.","app":"Autodesk Revit","details":"The view shows the kitchen, fridge, sink, washing machine, dishwasher, and the 5-foot-wide utility area."},{"start_s":22040.887,"end_s":22050.743,"action":"Continued zooming and panning across the GL floor plan, moving from a broader multi-unit layout to a closer 3BHK apartment view with bedrooms, toilets, dining, drawing room, kitchen, and balcony.","intent":"Review the floor-plan layout and apartment details.","app":"Autodesk Revit","details":"The final view prominently labels a 3BHK unit and 1723 square feet."},{"start_s":22050.743,"end_s":22060.179,"action":"Navigated the Revit floor plan with middle-button panning and scrolling, resized the window, and zoomed into the kitchen and dining area.","intent":"Inspect the floor-plan layout at different scales.","app":"Autodesk Revit","details":null},{"start_s":22060.179,"end_s":22069.745,"action":"Panned and zoomed across the floor plan, then selected a kitchen specialty-equipment element, leaving the view focused on the kitchen and wide corridor.","intent":"Inspect and select a kitchen element in the floor plan.","app":"Autodesk Revit","details":"The selected element is identified as a cooktop in the status bar."},{"start_s":22069.745,"end_s":22080.895,"action":"Zoomed out to review multiple apartment layouts, pressed Escape several times to exit the active command or selection state, and continued panning and scrolling.","intent":"Review the broader floor-plan arrangement and clear the active interaction state.","app":"Autodesk Revit","details":null},{"start_s":22080.895,"end_s":22088.649,"action":"Selected a furniture element in the floor plan, navigated to a closer view of adjacent apartments, and scrolled across the drawing.","intent":"Inspect a furniture placement and surrounding apartment layout.","app":"Autodesk Revit","details":"The Properties panel shows a selected furniture family instance."},{"start_s":22088.649,"end_s":22098.865,"action":"Selected the drawing-area element near the dining and kitchen spaces, resized the Revit window, and zoomed and scrolled around the selected area.","intent":"Inspect the selected floor-plan element and its surrounding rooms.","app":"Autodesk Revit","details":"The view remains centered on the dining, drawing, kitchen, and corridor area."},{"start_s":22098.865,"end_s":22108.171,"action":"Panned and scrolled across the multi-unit floor plan, moving from a central apartment view to a wider overview of surrounding apartments and corridors.","intent":"Review the overall floor-plan arrangement.","app":"Autodesk Revit","details":"System configuration and network status changed briefly during navigation."},{"start_s":22108.171,"end_s":22116.027,"action":"Clicked and resized the Revit window, then scrolled the GL floor plan to adjust the visible area.","intent":"Reposition and inspect the floor plan view.","app":"Autodesk Revit","details":"The GL floor plan remained visible, showing labeled rooms and furniture."},{"start_s":22116.027,"end_s":22126.357,"action":"Used middle-button navigation and clicked the drawing area to zoom into the Drawing room and adjacent wall.","intent":"Inspect a specific area of the floor plan.","app":"Autodesk Revit","details":"The view became a close-up of the Drawing room, sofa, table, and surrounding wall."},{"start_s":22126.357,"end_s":22136.307,"action":"Scrolled and navigated the model, pressed Escape repeatedly, and switched from the GL floor plan to the {3D} view.","intent":"Change views and inspect the building model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}; the 3D canvas was initially blank while loading."},{"start_s":22136.307,"end_s":22146.365,"action":"Scrolled and used middle-button navigation to orbit and zoom the 3D model from a close interior view to a broader building view.","intent":"Inspect the building layout in three dimensions.","app":"Autodesk Revit","details":"Brick-colored walls, doors, rooms, and furnishings were visible in the 3D view."},{"start_s":22146.365,"end_s":22164.936,"action":"Continued orbiting and zooming through multiple middle-button navigations, moving from a broad isometric view to wider views of the building, then switched to Windows Explorer.","intent":"Review the overall 3D model before changing applications.","app":"Autodesk Revit","details":"The final evidence still showed the Revit 3D model; the span ended with an application switch to Windows Explorer."},{"start_s":22164.936,"end_s":22174.957,"action":"Returned to Revit from the recorder, navigated the 3D model with scrolling and middle-button controls, and clicked the view tab to return toward the GL floor plan.","intent":"Continue inspecting the model and change back toward the floor plan.","app":"Autodesk Revit","details":"The 3D model remained visible while the title briefly changed to PROJECT 11 - Floor Plan: GL."},{"start_s":22174.957,"end_s":22183.764,"action":"Scrolled the Revit floor plan, selected a furniture element near the dining/living area, and then canceled the selection or command with Escape.","intent":"Inspect or select an element in the floor plan.","app":"Autodesk Revit","details":"The selected furniture element and its properties were briefly visible."},{"start_s":22183.764,"end_s":22193.949,"action":"Zoomed out and panned the floor plan to show multiple apartment layouts, then selected an element near the lower-left apartment area.","intent":"Review the overall floor-plan layout and inspect an element.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader plan overview."},{"start_s":22193.949,"end_s":22204.361,"action":"Zoomed and panned to the central apartment area, selected multiple visible plan elements, and resized or moved the Revit window during the inspection.","intent":"Inspect and manipulate selected floor-plan elements.","app":"Autodesk Revit","details":"Multiple-selection mode and temporary measurement or selection guides were visible."},{"start_s":22204.361,"end_s":22214.156,"action":"Selected furniture in the drawing room and entered a furniture modification state, leaving several furnishings highlighted in blue.","intent":"Modify or inspect the selected furniture arrangement.","app":"Autodesk Revit","details":"The Modify | Furniture contextual tools and blue furniture selections were visible."},{"start_s":22214.156,"end_s":22223.334,"action":"Canceled the active furniture operation, zoomed out substantially, and panned across the floor plan to review a broader building layout.","intent":"Exit the furniture edit state and review the overall plan.","app":"Autodesk Revit","details":"The final view showed several apartment units and shared circulation spaces."},{"start_s":22223.334,"end_s":22233.178,"action":"Panned and zoomed into another apartment section, selected a wall or plan element near the drawing room, and left the view focused on the central lobby and adjacent rooms.","intent":"Inspect another area of the floor plan and its elements.","app":"Autodesk Revit","details":"The final view showed the lobby, drawing room, dining area, and nearby bedrooms."},{"start_s":22233.178,"end_s":22242.383,"action":"Clicked in the Revit floor plan, adjusted the view, and left a selected rectangular raster-image region visible over the plan.","intent":"Inspect or reposition a plan element or referenced image.","app":"Autodesk Revit","details":"Floor Plan: GL remained open; the view shifted and the raster image selection boundary was visible."},{"start_s":22242.383,"end_s":22252.177,"action":"Selected a furniture element, dragged or repositioned it across the floor plan, and clicked elsewhere while leaving temporary measurement or placement guides visible.","intent":"Adjust the position of a furniture instance in the floor plan.","app":"Autodesk Revit","details":"Properties identified the selected item as furniture; the final view showed guide lines and dimensions extending from the selected furniture."},{"start_s":22252.177,"end_s":22261.701,"action":"Pressed Escape to exit the prior operation, then scrolled and middle-clicked to zoom or pan out across the floor plan for broader inspection.","intent":"Review a larger portion of the building layout.","app":"Autodesk Revit","details":"The view zoomed out from a local room area to show multiple apartment layouts and labels."},{"start_s":22261.701,"end_s":22271.837,"action":"Tabbed and clicked through the plan, scrolled to another apartment area, selected floor or furniture geometry, and zoomed in toward the living-room and kitchen region.","intent":"Navigate to and inspect another portion of the floor plan.","app":"Autodesk Revit","details":"The view moved from a multi-unit overview to a close-up showing the living room, kitchen, bedroom, and adjacent dining area."},{"start_s":22271.837,"end_s":22284.311,"action":"Scrolled repeatedly to zoom out and review the overall first-floor arrangement, including multiple apartment units and the schedule area.","intent":"Review the overall floor-plan composition.","app":"Autodesk Revit","details":"The plan was displayed at a broad overview scale with several labeled units and the Block-A first-floor table visible."},{"start_s":22284.311,"end_s":22294.659,"action":"Middle-clicked and panned across the overview, shifting the view toward the right-side units and central lobby while leaving a selected rectangular region and guide line visible.","intent":"Inspect and reposition the view around the central and right-side floor-plan areas.","app":"Autodesk Revit","details":"The final view showed multiple units, the central lobby and stairs, the first-floor schedule, and temporary selection or measurement graphics."},{"start_s":22294.659,"end_s":22312.206,"action":"Dismissed transient interface states with Escape and returned focus to the Autodesk Revit floor plan.","intent":"Restore the Revit workspace and prepare for the next operation.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":22312.206,"end_s":22316.316,"action":"Opened Revit’s File menu and displayed the recent documents list, then dismissed it with Escape.","intent":"Inspect or access file commands without opening a document.","app":"Autodesk Revit","details":"Recent files and commands such as New, Open, Save, Export, Print, and Close were visible."},{"start_s":22316.316,"end_s":22328.492,"action":"Switched among Revit ribbon tabs, ending on the Manage tab, and clicked the Object Styles control.","intent":"Open project-wide graphic and category style settings.","app":"Autodesk Revit","details":"The GL floor plan stayed visible behind the ribbon."},{"start_s":22328.492,"end_s":22342.171,"action":"Reviewed the Object Styles dialog and scrolled down through the Model Objects category list.","intent":"Inspect category line weights, colors, patterns, and materials.","app":"Autodesk Revit","details":"The dialog initially showed categories including Autments, Air Terminals, Ceilings, and Columns, then later categories around Communication Devices through Electrical Fixtures."},{"start_s":22342.171,"end_s":22360.059,"action":"Scrolled farther through Object Styles to the lower categories, selected the Walls row, and clicked near the dialog’s OK button.","intent":"Review wall-related graphic settings and finish the Object Styles inspection.","app":"Autodesk Revit","details":"Walls and subcategories such as Hidden Lines, Common Edges, and Wall Sweep-Cornice were visible; the dialog remained open in the evidence."},{"start_s":22360.059,"end_s":22370.159,"action":"Returned to the floor plan, selected the furniture group labeled Conjunto Estar Sofás, and moved or adjusted the selection so the group’s temporary outlines and guides appeared across the plan.","intent":"Manipulate or reposition the selected living-room furniture group in the GL floor plan.","app":"Autodesk Revit","details":"The selected furniture group was highlighted near the living area; the final view showed selection boundaries and a move cursor."},{"start_s":22370.159,"end_s":22379.581,"action":"Navigated the Revit GL floor plan with repeated middle-button clicks and scrolls, shifting the view across multiple apartment layouts.","intent":"Review different areas of the floor plan.","app":"Autodesk Revit","details":"The view changed from a partial 3BHK plan to another apartment layout."},{"start_s":22379.581,"end_s":22389.438,"action":"Continued panning and scrolling through the GL floor plan, moving across apartment rooms and corridors and ending on another apartment section.","intent":"Inspect additional floor-plan areas.","app":"Autodesk Revit","details":"The visible plan shifted through bedrooms, dining, kitchen, utility, and lobby areas."},{"start_s":22389.438,"end_s":22399.11,"action":"Zoomed and repositioned the floor plan, then clicked within the drawing; the view changed from a broad multi-unit overview to a close-up of a 3BHK layout.","intent":"Adjust the drawing view and inspect a selected plan area.","app":"Autodesk Revit","details":"Window resizing and view changes occurred; the final view showed a 3BHK plan labeled 2001 Sft."},{"start_s":22399.11,"end_s":22408.929,"action":"Worked in the close-up plan view, clicking around the 3BHK layout and its surrounding dashed geometry; entered a rotate-style modify state for the selected drawing element.","intent":"Modify or position a selected plan element.","app":"Autodesk Revit","details":"The status bar indicated rotation controls, and a dashed rectangular element remained selected."},{"start_s":22408.929,"end_s":22419.212,"action":"Dragged the selected element in the plan, scrolled to reposition the view, and clicked near the living-room and bedroom area while maintaining the active modify operation.","intent":"Position the selected element relative to the apartment layout.","app":"Autodesk Revit","details":"Temporary dimensions and rotation geometry were visible around the living room, Bedroom-2, and adjacent open area."},{"start_s":22419.212,"end_s":22429.675,"action":"Used keyboard input while the furniture selection remained active; the selected furniture group and temporary dimensions stayed visible in the living room.","intent":"Adjust or navigate the selected furniture group.","app":"Autodesk Revit","details":"The selected element was identified as the furniture group “Conjunto Estar Sofás,” with temporary dimensions updating from about 3.119 to 2.786."},{"start_s":22429.675,"end_s":22439.547,"action":"Dismissed active commands and navigated the GL floor plan with clicks and scrolling, leaving the plan visible with a wall extension selected.","intent":"Inspect or adjust elements in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":22439.547,"end_s":22450.43,"action":"Zoomed into the living, drawing, dining, lobby, and kitchen area, then selected and manipulated furniture geometry, leaving a temporary measurement arc visible.","intent":"Refine or inspect furniture placement in the floor plan.","app":"Autodesk Revit","details":"The view was resized during the interaction."},{"start_s":22450.43,"end_s":22459.873,"action":"Selected the Conjunto Estar Sofás furniture group and adjusted its position or move operation, with multiple sofa components highlighted and a temporary distance dimension shown.","intent":"Modify the living-room sofa arrangement.","app":"Autodesk Revit","details":"The selected furniture group remained active at the end."},{"start_s":22459.873,"end_s":22472.166,"action":"Selected the Conjunto Mesa 01 dining furniture group, then canceled or exited the active operation and returned to the unselected floor plan.","intent":"Inspect or modify the dining table and chair arrangement.","app":"Autodesk Revit","details":"Temporary dimensions appeared while the dining group was selected."},{"start_s":22472.166,"end_s":22481.009,"action":"Switched from the GL floor plan to the {3D} view and navigated the model with middle-button clicks and scrolling, bringing an axonometric building view into focus.","intent":"Review the model in three dimensions.","app":"Autodesk Revit","details":"The 3D view initially displayed a loading indicator before the model appeared."},{"start_s":22481.009,"end_s":22492.404,"action":"Continued navigating and zooming the 3D model, then selected the Conjunto Mesa 01 dining furniture group in the close-up view and left it highlighted.","intent":"Inspect the dining furniture placement in the 3D model.","app":"Autodesk Revit","details":"The final view showed the dining table and chairs selected near interior doors and walls."},{"start_s":22492.404,"end_s":22502.943,"action":"Scrolled and navigated the Revit workspace, then brought the GL floor plan into view and adjusted its zoom/pan.","intent":"Inspect the GL floor plan layout.","app":"Autodesk Revit","details":"The view changed from a blank/loading canvas to a detailed floor plan."},{"start_s":22502.943,"end_s":22512.715,"action":"Scrolled and adjusted the floor plan, then switched from the GL floor plan to the {3D} view.","intent":"Move from plan inspection to a three-dimensional model view.","app":"Autodesk Revit","details":"The 3D view displayed the modeled building layout."},{"start_s":22512.715,"end_s":22519.943,"action":"Scrolled and adjusted the 3D model view, entered a keyboard command, and waited while Revit processed and resized its window.","intent":"Refine the 3D model view and allow the project to save or update.","app":"Autodesk Revit","details":"The model remained visible while the application briefly hid, resized, and showed a saving indicator."},{"start_s":22519.943,"end_s":22527.933,"action":"Waited while the Revit window continued resizing and toggling visibility; left the 3D model displayed.","intent":"Wait for the application window and model view to stabilize.","app":"Autodesk Revit","details":"No model editing interaction was visible."},{"start_s":22527.933,"end_s":22540.657,"action":"Scrolled within the 3D view to adjust the model display.","intent":"Inspect the building model from the current 3D view.","app":"Autodesk Revit","details":"The overall model remained visible with no confirmed element modification."},{"start_s":22540.657,"end_s":22551.255,"action":"Clicked and scrolled repeatedly in the 3D view, zooming and repositioning from the overall building to a close interior view and then back to a distant overview.","intent":"Navigate through the 3D model to inspect interior spaces and overall composition.","app":"Autodesk Revit","details":"The close view showed furnished living and dining areas; the final view showed the model small at the right side of the canvas."},{"start_s":22551.255,"end_s":22561.033,"action":"Navigated from the Revit 3D view to the GL floor plan, adjusting the view with middle-button interactions and scrolling until the plan was displayed.","intent":"Switch to and inspect the GL floor plan.","app":"Autodesk Revit","details":"The title changed to Autodesk Revit 2025.4 - PROJECT 11 - Floor Plan: GL."},{"start_s":22561.033,"end_s":22571.593,"action":"Scrolled and repositioned the GL floor plan, progressively zooming into the apartment layout and room details.","intent":"Inspect specific areas of the GL floor plan.","app":"Autodesk Revit","details":"The view moved from a broad plan overview to a closer view showing a 3BHK unit with labeled rooms."},{"start_s":22571.593,"end_s":22581.409,"action":"Switched back to the 3D view and navigated around the model with middle-button actions and scrolling, changing the camera to inspect the building layout.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"The 3D model changed from a distant overview to a closer angled view of rooms and walls."},{"start_s":22581.409,"end_s":22590.857,"action":"Continued navigating the 3D model, then selected a floor element; briefly opened the floor editing context and canceled or exited it before continuing to inspect the model.","intent":"Review the 3D model and examine a floor element.","app":"Autodesk Revit","details":"A floor was selected and the Modify | Floors contextual tools appeared; no confirmed geometry change was made."},{"start_s":22590.857,"end_s":22600.737,"action":"Rotated, panned, and zoomed the Revit 3D view through multiple middle-button interactions to inspect different portions of the building layout.","intent":"Continue visual inspection of the building model.","app":"Autodesk Revit","details":"The camera moved from a partial close-up to a broader angled overview of the floor layout."},{"start_s":22600.737,"end_s":22620.737,"action":"Continued navigating the 3D view with middle-button actions, rotating and repositioning the camera to review the building from different angles.","intent":"Review the overall 3D building model.","app":"Autodesk Revit","details":"The model remained in the 3D view while the camera angle and framing changed; no additional edits were evident."},{"start_s":22620.737,"end_s":22637.15,"action":"Scrolled through the Revit 3D view and clicked the model with the middle mouse button, adjusting the displayed building perspective.","intent":"Navigate and inspect the 3D building model.","app":"Autodesk Revit","details":"The view showed an angled overview of the furnished floor layout."},{"start_s":22637.15,"end_s":22647.781,"action":"Middle-clicked and scrolled in the 3D view, zooming out and rotating the building model to a smaller, more distant overview.","intent":"Adjust the 3D camera to inspect the overall model.","app":"Autodesk Revit","details":"The model changed from a close angled view to a distant elevated overview."},{"start_s":22647.781,"end_s":22667.781,"action":"Scrolled and middle-clicked in the 3D view, zooming back in and repositioning the camera over the building layout.","intent":"Refine the 3D view for model inspection.","app":"Autodesk Revit","details":"The resulting view showed a closer elevated perspective of rooms, corridors, and stairs."},{"start_s":22667.781,"end_s":22687.781,"action":"Paused with the Revit 3D model view unchanged.","intent":"Review the displayed building model.","app":"Autodesk Revit","details":"No interaction events were recorded during this interval."},{"start_s":22687.781,"end_s":22707.781,"action":"Continued reviewing the unchanged Revit 3D model view.","intent":"Inspect the current building layout.","app":"Autodesk Revit","details":"No interaction events were recorded during this interval."},{"start_s":22707.781,"end_s":22715.281,"action":"Scrolled repeatedly in the 3D view, zooming and repositioning the camera over the building; the final view highlighted a wall element in blue.","intent":"Navigate and inspect a more detailed area of the 3D model.","app":"Autodesk Revit","details":"System state changes occurred near the start of the span; the final screenshot showed a selected wall in the model."},{"start_s":22715.281,"end_s":22735.281,"action":"Remained idle while displaying the Revit 3D building model.","intent":"Review the current 3D model view.","app":"Autodesk Revit","details":null},{"start_s":22735.281,"end_s":22744.251,"action":"Scrolled within the Revit 3D view without a visible change to the model.","intent":"Navigate the 3D view.","app":"Autodesk Revit","details":null},{"start_s":22744.251,"end_s":22764.251,"action":"Paused with the Revit 3D building model displayed.","intent":"Review the current model view.","app":"Autodesk Revit","details":null},{"start_s":22764.251,"end_s":22771.991,"action":"Scrolled and middle-clicked in the 3D view, zooming the building model out to a smaller overall view.","intent":"Adjust the 3D model view for broader inspection.","app":"Autodesk Revit","details":null},{"start_s":22771.991,"end_s":22781.745,"action":"Scrolled extensively and middle-clicked around the model, zooming into the building and ending on a close-up of an outdoor flooring element.","intent":"Navigate toward a specific model element for inspection.","app":"Autodesk Revit","details":"The selected element is labeled Floors: Floor: OUTDOOR FLOORING."},{"start_s":22781.745,"end_s":22791.273,"action":"Scrolled and middle-clicked through the 3D model, moving from the outdoor flooring close-up to interior rooms and ending with a wall selected.","intent":"Inspect interior building elements in the 3D view.","app":"Autodesk Revit","details":"The final view shows interior rooms and a selected wall labeled Walls: Basic Walls."},{"start_s":22791.273,"end_s":22801.443,"action":"Navigated the Revit 3D view with middle-clicks and scroll gestures, moving from a close-up furnished room to a zoomed-out view of the building layout.","intent":"Review the overall building model from a broader 3D perspective.","app":"Autodesk Revit","details":"The view changed from a dining-room area to a distant multi-room floor layout."},{"start_s":22801.443,"end_s":22810.843,"action":"Continued navigating the 3D model with middle-clicks and scroll gestures, zooming across the layout and ending on a close-up balcony with chairs and a sliding door.","intent":"Inspect another furnished area of the building model.","app":"Autodesk Revit","details":"The final view shows a balcony or terrace with seating beside an interior room."},{"start_s":22810.843,"end_s":22821.771,"action":"Scrolled and panned through the Revit 3D view, then zoomed back out to show most of the building and its rooms.","intent":"Review the spatial arrangement of rooms and circulation areas.","app":"Autodesk Revit","details":"The model alternated between broad and closer views; a wall was briefly selected during navigation."},{"start_s":22821.771,"end_s":22831.315,"action":"Navigated around the 3D model with repeated middle-clicks and scroll gestures, briefly zooming into rooms and stairs before returning to a distant overall view.","intent":"Inspect different portions of the building layout.","app":"Autodesk Revit","details":"The view included interior rooms, staircases, and furnished spaces."},{"start_s":22831.315,"end_s":22841.255,"action":"Panned and zoomed through the building model, moving from an overall view into furnished rooms and then back across the central layout; briefly interacted with the Revit window while resizing or repositioning it.","intent":"Continue visual inspection of the 3D building model.","app":"Autodesk Revit","details":"The model remained in a 3D view with multiple rooms, furniture, and staircases visible."},{"start_s":22841.255,"end_s":22851.259,"action":"Scrolled and navigated into a furnished room area, selected a floor region, then continued panning to another section of the building with living and dining spaces.","intent":"Inspect interior elements and room areas in the 3D model.","app":"Autodesk Revit","details":"A floor element was highlighted in blue before the view shifted to additional rooms and furnishings."},{"start_s":22851.259,"end_s":22861.215,"action":"Navigated the Revit 3D view with repeated middle-button clicks and scrolls, changing the zoom and viewpoint across the building model.","intent":"Inspect the building model from different 3D viewpoints.","app":"Autodesk Revit","details":null},{"start_s":22861.215,"end_s":22870.939,"action":"Continued navigating the 3D building model, zooming between an overview and closer views of the rooms and walls with middle-button interactions.","intent":"Review details of the 3D model.","app":"Autodesk Revit","details":null},{"start_s":22870.939,"end_s":22880.919,"action":"Rotated and zoomed the Revit 3D view through several viewpoints, briefly reducing the model to a distant view before ending on another angled overview.","intent":"Examine the model geometry from alternate orientations and scales.","app":"Autodesk Revit","details":null},{"start_s":22880.919,"end_s":22888.28,"action":"Exited the active 3D navigation and switched to the GL floor plan; right-clicked an item in the plan to open its context menu, which remained visible.","intent":"Move from 3D inspection to floor-plan review and access item commands.","app":"Autodesk Revit","details":"The title changed to Floor Plan: GL, and the context menu showed commands including Hide in View, Create Similar, Delete, and Zoom To Fit."},{"start_s":22888.28,"end_s":22898.463,"action":"Dismissed the context menu and scrolled the GL floor plan to reposition the view, leaving the raster floor-plan image selected.","intent":"Review a different area of the GL floor plan.","app":"Autodesk Revit","details":"The selected raster image was shown with Modify | Raster Images controls and image properties."},{"start_s":22898.463,"end_s":22909.844,"action":"Continued scrolling and repositioning the GL floor plan across apartment rooms, corridors, and stair areas, then clicked within the view and ended with Revit active.","intent":"Inspect additional portions of the floor-plan layout.","app":"Autodesk Revit","details":"The floor plan remained visible with the raster image selected near the end."},{"start_s":22909.844,"end_s":22920.43,"action":"Switched to Autodesk Revit, dismissed the current interaction, and typed “vr” to invoke the View Range command.","intent":"Open the View Range settings for the GL floor plan.","app":"Autodesk Revit","details":"The GL floor plan with a raster image overlay remained visible."},{"start_s":22920.43,"end_s":22931.173,"action":"Opened the View Range dialog and displayed the primary range fields for the associated GL level, including top, cut plane, bottom, and view depth offsets.","intent":"Review or adjust the floor plan view range.","app":"Autodesk Revit","details":"The dialog showed Top offset 7.546', Cut plane offset 4.921', Bottom offset 0.000', and View Depth offset 0.000'."},{"start_s":22931.173,"end_s":22944.237,"action":"Closed the View Range dialog, navigated around the GL floor plan with zoom and pan gestures, and selected a wall near the upper central rooms.","intent":"Inspect and select geometry in the floor plan.","app":"Autodesk Revit","details":"The view shifted from the broader plan to a closer view of the 3BHK layout; a wall was highlighted in blue."},{"start_s":22944.237,"end_s":22954.352,"action":"Zoomed and panned out across the GL floor plan, changing the raster image display from background to foreground while reviewing multiple apartment layouts.","intent":"Review the overall floor plan and its raster overlay.","app":"Autodesk Revit","details":"The final view showed several apartment units around the central lobby and stairs."},{"start_s":22954.352,"end_s":22962.653,"action":"Zoomed into the 3BHK unit labeled 1882 Sft., clicked near the left bedroom furniture, and continued panning and zooming within the unit.","intent":"Inspect the detailed 3BHK floor-plan area.","app":"Autodesk Revit","details":"The selected endpoint belonged to furniture labeled LR722_Conjunto_Cama."},{"start_s":22962.653,"end_s":22971.801,"action":"Clicked near the left bedroom wall or furniture, resized the Revit window, and zoomed further into the 3BHK unit until an endpoint and horizontal alignment tooltip appeared.","intent":"Inspect or align geometry near the bedroom wall.","app":"Autodesk Revit","details":"The final view showed the 3BHK 1711 Sft. plan with an endpoint/horizontal alignment cue."},{"start_s":22971.801,"end_s":22984.715,"action":"Scrolled slightly in the Revit floor plan and clicked near the wall beside Bedroom 2, leaving that wall highlighted.","intent":"Inspect or select a wall element in the Bedroom 2 area.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":22984.715,"end_s":22995.143,"action":"Selected the Bedroom 2 bed furniture, briefly navigated and zoomed out, then cleared the selection to view a broader floor plan.","intent":"Inspect the bed furniture and reposition the floor-plan view.","app":"Autodesk Revit","details":"The selected furniture was identified as LR722_Conjunto_Cama."},{"start_s":22995.143,"end_s":23004.521,"action":"Navigated back toward Bedroom 2, zoomed in, and cleared the furniture selection while leaving the bed and surrounding rooms visible.","intent":"Refocus the floor-plan view on Bedroom 2 for inspection.","app":"Autodesk Revit","details":"Bedroom 2, the toilets, and adjacent service area were shown."},{"start_s":23004.521,"end_s":23014.588,"action":"Scrolled and zoomed across the plan from Bedroom 2 to Bedroom 1, then clicked near the Bedroom 1 wall.","intent":"Inspect another bedroom and its nearby wall elements.","app":"Autodesk Revit","details":"The view ended focused on Bedroom 1 and Toilet 1."},{"start_s":23014.588,"end_s":23024.648,"action":"Scrolled and zoomed into a bed in the floor plan, then clicked near its left-side wall or boundary.","intent":"Inspect the bed placement and adjacent wall geometry.","app":"Autodesk Revit","details":"The view ended as a close-up of the bed and surrounding room boundary."},{"start_s":23024.648,"end_s":23035.022,"action":"Scrolled and zoomed back out from the bedroom close-up, then panned across the broader apartment floor plan.","intent":"Review the overall floor-plan layout and reposition the view.","app":"Autodesk Revit","details":"The final view showed multiple apartments, living areas, bedrooms, and the central lobby."},{"start_s":23035.022,"end_s":23044.763,"action":"Clicked and navigated within the Revit floor plan, then resized the window; the view ended zoomed into Bedroom 1 and the adjacent toilet.","intent":"Inspect the floor-plan layout around Bedroom 1.","app":"Autodesk Revit","details":null},{"start_s":23044.763,"end_s":23053.703,"action":"Scrolled and clicked through the floor plan, then resized the window; the view ended showing the balcony, living area, Bedroom 2, and the 3BHK 2001 Sqft label.","intent":"Review the upper apartment layout and room arrangement.","app":"Autodesk Revit","details":null},{"start_s":23053.703,"end_s":23065.702,"action":"Clicked and zoomed out across the floor plan, then clicked again; the view moved from the upper apartment to a broader building layout and ended zoomed into another Bedroom 1 and toilet area.","intent":"Navigate between apartment units and inspect their room layouts.","app":"Autodesk Revit","details":null},{"start_s":23065.702,"end_s":23077.574,"action":"Resized the Revit window and clicked across the plan, panning from Bedroom 1 toward the paired toilets and Bedroom 2; the view ended centered on Toilet-1, Toilet-2, and Bedroom 2.","intent":"Inspect the bedroom and bathroom arrangement in the apartment plan.","app":"Autodesk Revit","details":null},{"start_s":23077.574,"end_s":23088.146,"action":"Scrolled to zoom out and clicked across the plan, transitioning from the bathroom and bedroom detail to a broader multi-unit floor-plan view.","intent":"Review the overall distribution of apartment units and shared circulation.","app":"Autodesk Revit","details":null},{"start_s":23088.146,"end_s":23096.594,"action":"Resized the window, scrolled and clicked within the plan, then zoomed out to show Bedroom 1, Toilet-1, Bedroom 2, and the Pooja room together.","intent":"Inspect the detailed room arrangement of another apartment unit.","app":"Autodesk Revit","details":null},{"start_s":23096.594,"end_s":23105.372,"action":"Clicked in the Revit floor plan, resized the window, and pressed Escape several times while the view remained on the upper bedrooms and toilet area.","intent":"Adjust the Revit workspace and exit the current command.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":23105.372,"end_s":23115.076,"action":"Scrolled and middle-clicked around the floor plan to navigate toward the living, dining, kitchen, and master-bedroom area, then selected a furniture item.","intent":"Navigate the floor plan and inspect or select furniture.","app":"Autodesk Revit","details":"A furniture element is selected by the end of the span."},{"start_s":23115.076,"end_s":23125.789,"action":"Clicked an endpoint and scrolled across the floor plan, moving the view toward the right-side master bedroom and utility area before pressing Escape.","intent":"Navigate and inspect geometry in the floor plan.","app":"Autodesk Revit","details":"Endpoint snap feedback appeared during the interaction."},{"start_s":23125.789,"end_s":23135.47,"action":"Selected the bed furniture in the master bedroom, then zoomed out substantially to show the broader building floor plan.","intent":"Inspect the master-bedroom furniture and review its placement in the overall plan.","app":"Autodesk Revit","details":"The bed remained selected while the view changed to a zoomed-out plan."},{"start_s":23135.47,"end_s":23146.491,"action":"Middle-clicked and clicked around the zoomed-out plan, cleared the furniture selection, and scrolled back into a closer view of the lobby, drawing room, kitchen, and master bedroom.","intent":"Reposition the view and inspect surrounding floor-plan elements.","app":"Autodesk Revit","details":"The final view shows the central lobby and adjacent rooms."},{"start_s":23146.491,"end_s":23158.658,"action":"Clicked and scrolled to navigate across the multi-unit floor plan, zooming out to show several apartment layouts and continuing a drag or move operation near the center.","intent":"Review the overall building layout and reposition the active plan interaction.","app":"Autodesk Revit","details":"The status bar indicates an active move endpoint operation near the end."},{"start_s":23158.658,"end_s":23171.088,"action":"Selected and repositioned a furniture element on the GL floor plan, then entered a numeric value of 90 and confirmed it.","intent":"Adjust the selected furniture element's placement or parameter.","app":"Autodesk Revit","details":"The view remained on the GL floor plan with the selected element near the upper-left bedroom area."},{"start_s":23171.088,"end_s":23181.168,"action":"Selected the furniture element, adjusted its endpoint, and zoomed into the master bedroom and toilet area.","intent":"Refine the furniture element's position while inspecting the surrounding floor-plan geometry.","app":"Autodesk Revit","details":"The view changed from the overall plan to a close-up showing the M.BED ROOM and M.TOILET."},{"start_s":23181.168,"end_s":23194.963,"action":"Dragged and edited the selected furniture element in the master bedroom, leaving it highlighted in Modify | Furniture mode.","intent":"Modify the furniture instance within the bedroom layout.","app":"Autodesk Revit","details":"The selected bed-like furniture instance was highlighted in cyan over the M.BED ROOM."},{"start_s":23194.963,"end_s":23205.306,"action":"Selected the furniture, switched to a multiple-selection or modify control, and zoomed out to reveal the bedroom, kitchen, and utility areas.","intent":"Inspect the furniture placement in relation to adjacent rooms.","app":"Autodesk Revit","details":"The resulting view showed the M.BED ROOM together with the KITCHEN and WIDE UTILITY."},{"start_s":23205.306,"end_s":23214.785,"action":"Navigated around the floor plan with middle-clicks and scrolling, moving from the bedroom close-up to a broader view of the apartment layout.","intent":"Review the furniture placement and surrounding floor-plan context.","app":"Autodesk Revit","details":"The view ended on a wider portion of the plan showing bedrooms, dining, kitchen, lobbies, and corridors."},{"start_s":23214.785,"end_s":23226.396,"action":"Scrolled and navigated across the GL floor plan, zooming out to a broad multi-unit view, then pressed Escape.","intent":"Review the overall floor-plan arrangement and exit the active interaction.","app":"Autodesk Revit","details":"The final view showed several apartment units and the central lobby/core area."},{"start_s":23226.396,"end_s":23234.944,"action":"Restored Autodesk Revit, switched to the PROJECT 11 3D view, and navigated the model with scroll gestures to reveal the furnished building layout.","intent":"Inspect the Revit 3D model.","app":"Autodesk Revit","details":"The view changed from a blank/loading state to a furnished multi-room 3D building model."},{"start_s":23234.944,"end_s":23244.936,"action":"Navigated the 3D view with middle-button actions and scroll gestures, first viewing the furnished rooms closer and then zooming out to show more of the building.","intent":"Adjust the 3D model view for inspection.","app":"Autodesk Revit","details":null},{"start_s":23244.936,"end_s":23255.287,"action":"Continued orbiting and zooming the 3D model with repeated middle-button actions and scroll gestures, moving from an angled room view to a broader top-down view of rooms, corridors, and stairs.","intent":"Review different areas of the building model.","app":"Autodesk Revit","details":null},{"start_s":23255.287,"end_s":23270.027,"action":"Scrolled and navigated the 3D view to zoom farther out and reposition the model, ending with a broad top-down view of multiple furnished floor sections.","intent":"Inspect the overall building layout.","app":"Autodesk Revit","details":null},{"start_s":23270.027,"end_s":23280.542,"action":"Scrolled the model view, then selected the GL floor-plan tab and navigated within it until the detailed furnished floor plan was visible.","intent":"Switch from the 3D model to the GL floor plan for plan review.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - Floor Plan: GL."},{"start_s":23280.542,"end_s":23290.699,"action":"Scrolled and repositioned the GL floor plan, zooming out from a detailed room view to a broader apartment layout with stairs, lifts, multiple units, and a schedule table visible.","intent":"Review the overall GL floor plan.","app":"Autodesk Revit","details":"A raster floor-plan image remained selected while the view was navigated."},{"start_s":23290.699,"end_s":23301.59,"action":"Adjusted the Revit window and scrolled within the floor plan, then clicked near the upper view area while the furnished layout remained visible.","intent":"Navigate and inspect the Revit floor plan.","app":"Autodesk Revit","details":null},{"start_s":23301.59,"end_s":23311.51,"action":"Zoomed into the floor plan around the lobby, drawing room, and bedroom, then selected the vertical furniture element beside the bedroom.","intent":"Inspect or select a furniture element in the plan.","app":"Autodesk Revit","details":"The selected element is highlighted in blue and identified in the Properties panel as LR2075_RACK_DE_TV_MONTANA."},{"start_s":23311.51,"end_s":23318.31,"action":"Kept the furniture element selected, issued several keyboard inputs, then clicked and scrolled near the selected object; the selection cleared and the view remained zoomed into the drawing and bedroom area.","intent":"Continue editing or inspecting the selected furniture and nearby plan geometry.","app":"Autodesk Revit","details":null},{"start_s":23318.31,"end_s":23327.994,"action":"Scrolled to zoom out and reposition the floor plan, then middle-clicked to navigate toward the lower-right apartment area.","intent":"Navigate across the floor plan for inspection.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader plan view and then to the lower-right unit."},{"start_s":23327.994,"end_s":23338.478,"action":"Continued panning and zooming around the floor plan, moving from the broader apartment layout into a close-up of Bedroom-1, the adjacent toilet, and drawing room edge; clicked near a door or floor-plan endpoint.","intent":"Inspect wall, door, and furniture geometry in the apartment plan.","app":"Autodesk Revit","details":"The status bar indicated an endpoint near a door or floor element during the close-up."},{"start_s":23338.478,"end_s":23351.853,"action":"Clicked in the drawing-room area, navigated to another apartment view, selected the Rotate tool, and entered 90 followed by Enter while the rotation operation remained active.","intent":"Rotate or reposition a selected plan element by 90 degrees.","app":"Autodesk Revit","details":"The final view shows the Rotate tool active with a selected element and rotation guides in the drawing/dining area."},{"start_s":23351.853,"end_s":23363.044,"action":"Pressed Enter, resized and repositioned the Revit window, then clicked and scrolled within the floor plan; selected a furniture element near the Drawing room.","intent":"Inspect or adjust a floor-plan furniture element.","app":"Autodesk Revit","details":"Floor Plan: GL remained open; the selected element was identified as a furniture item."},{"start_s":23363.044,"end_s":23371.662,"action":"Clicked within the plan and zoomed out, then middle-clicked and scrolled to pan across the apartment layout.","intent":"Navigate the floor plan to inspect a broader area.","app":"Autodesk Revit","details":"The view changed from a close-up to a wider multi-unit floor-plan view."},{"start_s":23371.662,"end_s":23382.926,"action":"Clicked near the Drawing room furniture and navigated the view with repeated scrolling, leaving an element or endpoint active for editing.","intent":"Inspect or reposition an element in the Drawing and Dining area.","app":"Autodesk Revit","details":"The plan showed the Drawing and Dining rooms; temporary editing guides and an active endpoint were visible."},{"start_s":23382.926,"end_s":23393.45,"action":"Clicked and navigated to another apartment area, then middle-clicked to pan and activated rotation controls around the Living room furniture.","intent":"Inspect or manipulate furniture placement in the floor plan.","app":"Autodesk Revit","details":"The view moved from the Drawing/Dining area to the Living room; rotation guides were visible."},{"start_s":23393.45,"end_s":23405.522,"action":"Selected a furniture element near the Living room, clicked to define an edit point, and entered several keyboard inputs while continuing the element edit.","intent":"Modify or position the selected Living room furniture element.","app":"Autodesk Revit","details":"The selected family was LR2075_RACK_DE_TV_MONTANA; temporary dimensions and editing guides were shown."},{"start_s":23405.522,"end_s":23415.495,"action":"Entered keyboard input, typed “cm,” and switched back to Revit; selected the placed furniture and activated component placement for a refrigerator family.","intent":"Place or prepare another component in the floor plan.","app":"Autodesk Revit","details":"Revit ended in Modify | Place Component mode with a refrigerator family selected."},{"start_s":23415.495,"end_s":23423.913,"action":"Switched to Autodesk Revit and continued placing the Basic_workdek_7034 component in the GL floor plan, positioning it near the living-room wall and door area.","intent":"Position a furniture component in the floor plan.","app":"Autodesk Revit","details":"Component placement mode remained active; the view was resized and the component was moved toward an endpoint."},{"start_s":23423.913,"end_s":23434.168,"action":"Selected the Furniture_TV_Plasma 50-inch component, adjusted its placement along the living-room wall, and entered 3' to set a placement distance.","intent":"Place and dimension a television component in the living room.","app":"Autodesk Revit","details":"The component remained in placement mode and the wall geometry was highlighted during positioning."},{"start_s":23434.168,"end_s":23443.948,"action":"Moved the TV component along the wall, clicked to position it, reviewed the temporary dimensions, and pressed Escape to end or cancel the placement operation.","intent":"Refine the furniture placement and exit placement mode.","app":"Autodesk Revit","details":"The selected component showed a 3-foot elevation/offset in the Properties panel."},{"start_s":23443.948,"end_s":23461.3,"action":"Navigated and zoomed the floor plan around the bedroom and living room, clicked near the furniture and wall geometry, and entered unit text while adjusting the view.","intent":"Inspect and refine furniture placement relative to adjacent rooms and walls.","app":"Autodesk Revit","details":"The view shifted from the living room toward Bedroom-1; temporary dimensions and endpoint references were visible."},{"start_s":23461.3,"end_s":23470.402,"action":"Opened the component type search, reviewed available furniture families, then returned to the floor plan and resumed placement of the Basic_workdek_7034 component.","intent":"Choose or resume placing a furniture family in the floor plan.","app":"Autodesk Revit","details":"The search list displayed furniture families including TV, desk, chair, and refrigerator types."},{"start_s":23470.402,"end_s":23480.54,"action":"Zoomed and panned out across the floor plan while the Basic_workdek_7034 component remained selected, pressed Escape several times, and ended with a broader plan view loading.","intent":"Review the component placement in the overall floor plan.","app":"Autodesk Revit","details":"The final view showed much of the building plan with a loading indicator."},{"start_s":23480.54,"end_s":23500.54,"action":"Briefly hid and restored the Revit window, then left the GL floor-plan view visible after moving the window.","intent":"Maintain the Revit floor-plan workspace while adjusting window visibility or position.","app":"Autodesk Revit","details":null},{"start_s":23500.54,"end_s":23513.146,"action":"Scrolled within the GL floor plan to zoom in on the apartment layouts, bringing the central and right-side units into closer view.","intent":"Inspect floor-plan details at a larger scale.","app":"Autodesk Revit","details":null},{"start_s":23513.146,"end_s":23521.948,"action":"Middle-clicked and scrolled through the GL floor plan to pan and zoom across the apartment units, then typed “cm” before the window briefly hid and reappeared.","intent":"Navigate and inspect different areas of the floor plan.","app":"Autodesk Revit","details":"The visible view moved between apartment interiors and the central lobby area."},{"start_s":23521.948,"end_s":23531.724,"action":"Pressed Escape several times, scrolled and middle-clicked to reposition the view, ending on a closer view of apartment bedrooms, living, dining, kitchen, and lobby areas.","intent":"Exit any active navigation state and continue reviewing the floor plan.","app":"Autodesk Revit","details":null},{"start_s":23531.724,"end_s":23546.109,"action":"Middle-clicked and scrolled repeatedly to zoom out and pan across the building plan, then the Revit window underwent repeated hide, resize, and restore transitions before another click.","intent":"Review a broader portion of the building layout and adjust the application window.","app":"Autodesk Revit","details":"The view progressed from a close apartment view to a wider multi-unit and central-stair view."},{"start_s":23546.109,"end_s":23555.275,"action":"Switched through Windows Explorer and the recorder and returned to the Revit floor plan, then scrolled and middle-clicked to zoom into a dining and bedroom area.","intent":"Return to Revit and inspect detailed plan elements.","app":"Autodesk Revit","details":"The final view centered on a dining room, drawing room, balcony, bedrooms, toilets, and pooja room."},{"start_s":23555.275,"end_s":23565.386,"action":"Navigated from the GL floor plan through view controls and switched to the project’s 3D view, leaving the model canvas briefly blank while it loaded.","intent":"Inspect the project in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}."},{"start_s":23565.386,"end_s":23574.904,"action":"Adjusted the 3D view with repeated middle-button navigation and scrolling, changing from a close isometric apartment view to a much smaller overall model view.","intent":"Examine the building model at different scales.","app":"Autodesk Revit","details":null},{"start_s":23574.904,"end_s":23585.936,"action":"Returned to the GL floor plan, zoomed and panned around the apartment layout, then typed a unit-related entry and activated component placement.","intent":"Prepare to place a component in the floor plan.","app":"Autodesk Revit","details":"The active tool became Modify | Place Component with Basic_workdesk_7034 shown in Properties."},{"start_s":23585.936,"end_s":23596.678,"action":"Scrolled through the floor plan while the component placement tool remained active, then opened the component type/search list and browsed available families.","intent":"Search for a suitable component family.","app":"Autodesk Revit","details":"The list displayed items including plumbing fixtures, furniture, and a suite elevator closet."},{"start_s":23596.678,"end_s":23614.093,"action":"Kept the component placement workflow active, selected or searched for the suite elevator closet family, and clicked in the floor plan while the view showed temporary dimensions and highlighted geometry.","intent":"Position or place the selected component in the plan.","app":"Autodesk Revit","details":"The selected family was shown as suite elevator closet."},{"start_s":23614.093,"end_s":23621.762,"action":"Scrolled through the component search list and browsed family options, leaving the floor plan visible behind the open list without a confirmed placement.","intent":"Continue searching for a component type.","app":"Autodesk Revit","details":"Visible options included suite elevator closet, grab rails, Lavadora, bed, and chair families."},{"start_s":23621.762,"end_s":23630.311,"action":"Entered component placement mode for the Furniture_Chair_Office family, zoomed into the master bedroom and toilet area, and clicked to position or adjust the preview near the bedroom furniture.","intent":"Place office chair furniture in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained active."},{"start_s":23630.311,"end_s":23639.715,"action":"Scrolled and selected the Basic_workdek_7034 furniture family, then clicked and positioned its preview along the lower wall of the master bedroom near the window.","intent":"Place a workdesk in the master bedroom.","app":"Autodesk Revit","details":"The workdesk preview was visible with temporary placement dimensions."},{"start_s":23639.715,"end_s":23648.825,"action":"Pressed Escape repeatedly to exit placement or selection states, scrolled to zoom out, and middle-clicked to navigate the floor plan, leaving several furniture elements highlighted in the drawing area.","intent":"Exit the current placement operation and review the broader floor plan.","app":"Autodesk Revit","details":"The view changed from the master bedroom close-up to a broader plan view."},{"start_s":23648.825,"end_s":23658.849,"action":"Middle-clicked and scrolled to zoom farther out, then clicked the plan to select an element near the master bedroom and balcony area.","intent":"Review and select an element in the overall floor plan.","app":"Autodesk Revit","details":"The overall 3BHK floor plan was visible, with a selected element near the lower-left portion of the plan."},{"start_s":23658.849,"end_s":23668.558,"action":"Clicked and scrolled within the plan, selected a furniture or floor-plan element near the drawing and bedroom area, and began a move operation with an endpoint snap visible.","intent":"Reposition a selected plan element.","app":"Autodesk Revit","details":"The view zoomed into the drawing room and Bedroom-1 boundary while move guides and an Endpoint snap were displayed."},{"start_s":23668.558,"end_s":23678.65,"action":"Pressed Escape and navigated the plan, then selected the Furniture_Chair_Office family near the master bedroom and dragged its move preview toward the drawing-room furniture area.","intent":"Move the office chair furniture to a new location in the floor plan.","app":"Autodesk Revit","details":"The chair was selected near the master bedroom at first; the final frame showed an active move preview near the upper furniture."},{"start_s":23678.65,"end_s":23688.335,"action":"Resized and repositioned the Revit window, pressed Escape several times, and used middle-clicks, Tab, and clicks while keeping the GL floor plan visible.","intent":"Navigate or adjust the active Revit view and selection state.","app":"Autodesk Revit","details":null},{"start_s":23688.335,"end_s":23700.054,"action":"Dismissed the active state and scrolled the GL floor plan from a close view of the drawing area to a wider view showing multiple rooms and selected furniture.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":"The view ended with the full apartment layout visible and furniture highlighted."},{"start_s":23700.054,"end_s":23710.046,"action":"Middle-clicked and navigated the floor plan, then tabbed through selectable elements and scrolled to a view centered on the dining, kitchen, bedroom, and utility areas.","intent":"Inspect and cycle through elements in the floor plan.","app":"Autodesk Revit","details":"The final view showed the wide utility area selected."},{"start_s":23710.046,"end_s":23720.169,"action":"Tabbed through elements and scrolled toward the kitchen and utility area, then clicked to select specialty equipment near the utility room.","intent":"Inspect or select an element in the kitchen and utility layout.","app":"Autodesk Revit","details":"The view ended in a close-up with a Lavadora specialty equipment element selected."},{"start_s":23720.169,"end_s":23731.234,"action":"Zoomed and navigated around the selected lavadora, clicked near the kitchen and utility boundaries, and selected a wall or endpoint while keeping the area in close view.","intent":"Inspect the utility-room equipment and nearby architectural boundaries.","app":"Autodesk Revit","details":"The close-up showed the kitchen, utility room, appliances, and temporary selection or dimension graphics."},{"start_s":23731.234,"end_s":23741.583,"action":"Clicked near the utility-room elements, resized or repositioned the Revit window, then pressed Escape and Tab while leaving the kitchen and utility area displayed with temporary selection graphics.","intent":"Continue inspecting or canceling an active Revit selection or placement operation.","app":"Autodesk Revit","details":"The final view showed the utility-room doors and nearby appliances with selection lines visible."},{"start_s":23741.583,"end_s":23753.389,"action":"Scrolled and middle-clicked within the GL floor plan, shifting the view to inspect the dining, kitchen, toilet, and adjacent rooms.","intent":"Review the floor-plan layout and navigate to the kitchen and toilet area.","app":"Autodesk Revit","details":"GL floor plan remained visible while the viewport was panned/zoomed."},{"start_s":23753.389,"end_s":23763.693,"action":"Scrolled and middle-clicked around the floor plan, then selected a generic model element near the kitchen; the view was repositioned and the Generic Models contextual tools appeared.","intent":"Navigate and select an element in the kitchen area for inspection or editing.","app":"Autodesk Revit","details":"A generic model was selected near the sink and appliances."},{"start_s":23763.693,"end_s":23774.019,"action":"Entered extrusion editing for the selected generic model, clicked in the plan, and began defining a rectangular extrusion profile near the sink and wall.","intent":"Edit the geometry of the selected generic model.","app":"Autodesk Revit","details":"Revit showed Modify | Extrusion with an active rectangle-drawing prompt."},{"start_s":23774.019,"end_s":23787.506,"action":"Completed the extrusion-profile interaction, exited the extrusion-editing context, and activated component placement; a Basic_workbed_7034 family became ready to place in the floor plan.","intent":"Switch from geometry editing to placing a furniture component.","app":"Autodesk Revit","details":"The interface displayed Modify | Place Component and the Basic_workbed_7034 family."},{"start_s":23787.506,"end_s":23794.118,"action":"Scrolled while in Place Component mode and opened the family search/list, browsing available furniture and plumbing-related family types.","intent":"Locate a component family for placement.","app":"Autodesk Revit","details":"The family browser/search list was open with entries such as beds, sinks, and plumbing fixtures."},{"start_s":23794.118,"end_s":23804.056,"action":"Typed into the component search/list, selected Plumbing_Fixtures_Sink_Cloakroom, and moved the placement cursor over the plan; the sink preview and temporary dimensions appeared near the upper sink area.","intent":"Choose and position a cloakroom sink component in the floor plan.","app":"Autodesk Revit","details":"Place Component mode remained active with the selected sink family and visible temporary dimensions."},{"start_s":23804.056,"end_s":23813.507,"action":"Clicked and scrolled within the Revit floor plan, dismissed the active interaction, and adjusted the view to show more of the apartment layout.","intent":"Navigate and review the floor plan.","app":"Autodesk Revit","details":"GL floor plan remained visible; the view changed from a closer crop to a wider apartment view."},{"start_s":23813.507,"end_s":23822.665,"action":"Selected a furniture element near Bedroom 1, then clicked additional plan elements and exited the selection state.","intent":"Inspect or select floor-plan components.","app":"Autodesk Revit","details":"The Properties panel briefly identified the selected element as a suite elevator closet furniture item."},{"start_s":23822.665,"end_s":23837.766,"action":"Canceled prior commands, selected the suite elevator closet furniture, and entered component placement mode for a plumbing fixture while zooming toward Bedroom 2 and Toilet 2.","intent":"Place or prepare a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"The final view showed Modify | Place Component with a plumbing fixture type active and the plan centered on the upper-right rooms."},{"start_s":23837.766,"end_s":23852.356,"action":"Scrolled and zoomed around Bedroom 2 and Toilet 2, switched to a Basic_workdesk_7034 furniture type, and positioned the view for placement.","intent":"Choose and position a furniture component.","app":"Autodesk Revit","details":"The furniture placement cursor remained active; Bedroom 2 was shown at close range."},{"start_s":23852.356,"end_s":23858.866,"action":"Scrolled slightly and opened the component type picker, displaying available furniture and appliance families such as Conjunto Mesa 01, Cook_Top, and Furniture_Chair_Office.","intent":"Browse available component types before placement.","app":"Autodesk Revit","details":"The type list remained open over the Bedroom 2 view."},{"start_s":23858.866,"end_s":23867.304,"action":"Selected the Furniture_Chair_Office type, dismissed the picker, and exited placement while zooming back out to the wider floor plan.","intent":"Change the component type and review its placement context.","app":"Autodesk Revit","details":"The Properties panel showed Furniture_Chair_Office, and the final view displayed the upper portion of the GL floor plan."},{"start_s":23867.304,"end_s":23877.045,"action":"Selected the dining table furniture and briefly adjusted the Revit window, leaving the element highlighted with temporary dimensions.","intent":"Inspect or adjust the dining furniture placement.","app":"Autodesk Revit","details":"Floor Plan: GL; selected element shown as Furniture: Conjunto Mesa 01."},{"start_s":23877.045,"end_s":23887.518,"action":"Zoomed and panned around the GL floor plan, moving from the dining area to a broader view of the apartment layout.","intent":"Review the floor plan and locate another area or element.","app":"Autodesk Revit","details":"The view expanded to include the lobby, drawing room, bedrooms, kitchen, and balcony."},{"start_s":23887.518,"end_s":23897.573,"action":"Zoomed and panned to compare adjacent apartment layouts, then selected or manipulated an element near the upper portion of the right-hand plan; a WhatsApp notification appeared over the lower-right corner.","intent":"Inspect or edit an element in the floor plan while navigating between layouts.","app":"Autodesk Revit","details":"Temporary dimensions and selection controls were visible; WhatsApp notification remained over the view."},{"start_s":23897.573,"end_s":23908.272,"action":"Zoomed into the master-bedroom toilet area and adjusted a selected plumbing fixture or constraint, with repeated cancellations and keyboard navigation while the view remained focused on the toilet.","intent":"Edit the plumbing fixture arrangement or its placement constraint.","app":"Autodesk Revit","details":"The selected area was the M.TOILET beside the M.BED ROOM; temporary angular and alignment guides were visible."},{"start_s":23908.272,"end_s":23919.01,"action":"Selected the WC_-Disabled plumbing fixture in the master toilet and continued keyboard-based adjustments or alternate selection cycling while zoomed in.","intent":"Inspect or modify the disabled toilet arrangement.","app":"Autodesk Revit","details":"Properties identified the element as WC_-Disabled, Disabled Toilet Arrangement; Modify | Plumbing Fixtures mode was active."},{"start_s":23919.01,"end_s":23928.57,"action":"Continued keyboard interaction with the selected WC_-Disabled fixture without a clearly visible committed change, keeping the master toilet zoomed in.","intent":"Continue editing or cycle selection options for the plumbing fixture.","app":"Autodesk Revit","details":"The fixture remained selected in Modify | Plumbing Fixtures mode; no definite final placement change was visible."},{"start_s":23928.57,"end_s":23942.021,"action":"Exited and reopened Revit placement interactions, switched from wall placement to component placement, and selected the Furniture_Chair_Office component. Resized the Revit window while leaving the floor plan visible.","intent":"Prepare a furniture component for placement in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":23942.021,"end_s":23948.457,"action":"Opened the component type selector and scrolled through the available families and recently used types without placing a component.","intent":"Browse available Revit component families for placement.","app":"Autodesk Revit","details":"The selector showed items including Basic_workdek_7034, sofa sets, tables, and kitchen components."},{"start_s":23948.457,"end_s":23956.611,"action":"Closed the type selector, retained the plumbing sink component, and zoomed into the bathroom area of the floor plan. Positioned the placement cursor near the sink/toilet room.","intent":"Prepare to place a plumbing fixture in the bathroom.","app":"Autodesk Revit","details":"The selected type was Plumbing_Fixtures_Sink_Cloakroom, 440x350x120mm."},{"start_s":23956.611,"end_s":23969.695,"action":"Scrolled and navigated across the floor plan, opened the component selector, and browsed fixture and furniture types. Returned to the bathroom view with the shower-head component active.","intent":"Select and position another plumbing fixture for the floor plan.","app":"Autodesk Revit","details":"The visible room was labeled M.TOILET, 6' 0\" x 8' 6\"."},{"start_s":23969.695,"end_s":23977.242,"action":"Canceled the active placement commands, switched from the GL floor plan to the {3D} view, and encountered a warning that created elements were not visible in the floor plan view.","intent":"Review the model in 3D after fixture placement attempts.","app":"Autodesk Revit","details":"The warning stated that none of the created elements were visible in Floor Plan: GL."},{"start_s":23977.242,"end_s":23986.229,"action":"Navigated the 3D model with middle-button orbit/pan actions and scroll zooming, first viewing a close isometric portion of the building and then zooming far out to show the overall floor layout.","intent":"Inspect the building model and overall arrangement in 3D.","app":"Autodesk Revit","details":"The final view showed the model greatly reduced in scale against the dark 3D workspace."},{"start_s":23986.229,"end_s":23996.307,"action":"Scrolled and navigated the Revit 3D view, changing from an angled room overview to a more top-down view of the floor layout.","intent":"Inspect the model from different 3D viewpoints.","app":"Autodesk Revit","details":null},{"start_s":23996.307,"end_s":24005.303,"action":"Middle-clicked and scrolled repeatedly to zoom and reposition across the 3D floor model, ending on a closer view of rooms and furnishings.","intent":"Examine areas of the building model in detail.","app":"Autodesk Revit","details":null},{"start_s":24005.303,"end_s":24015.4,"action":"Selected a plumbing fixture labeled WC_-Disabled and navigated the 3D view around the adjacent toilet and bedroom areas while the fixture remained highlighted.","intent":"Inspect the disabled toilet plumbing fixture and its surrounding placement.","app":"Autodesk Revit","details":"The selected element is shown in Properties as WC_-Disabled, Disabled Toilet Arrangement."},{"start_s":24015.4,"end_s":24024.987,"action":"Pressed Escape to leave the element interaction, then middle-clicked and scrolled to rotate and reposition the 3D view across the building layout.","intent":"Exit the fixture selection and continue reviewing the model.","app":"Autodesk Revit","details":null},{"start_s":24024.987,"end_s":24034.119,"action":"Clicked the view controls to switch from the 3D view to Floor Plan: GL, then scrolled to zoom into the plan around the labeled M.TOILET area.","intent":"Review the GL floor plan and inspect toilet layout details.","app":"Autodesk Revit","details":"The floor plan displays M.TOILET, sized 6' 0\" x 8' 6\"."},{"start_s":24034.119,"end_s":24045.137,"action":"Scrolled and middle-clicked to reposition and zoom the GL floor plan, then activated Place Wall with the Curtain Wall type and moved to the TOILET-1 area.","intent":"Prepare to place a wall in the floor plan near the toilet and bedroom layout.","app":"Autodesk Revit","details":"The final view shows TOILET-1 beside BED ROOM-1 with the Place Wall tool active and Curtain Wall selected."},{"start_s":24045.137,"end_s":24054.66,"action":"Clicked in the Revit floor plan, pressed Escape repeatedly, and resized the application window while remaining in the wall-placement context.","intent":"Exit or cancel the current wall-placement operation and adjust the Revit window.","app":"Autodesk Revit","details":"Floor Plan: GL remained centered on Toilet-1 and Bed Room-1."},{"start_s":24054.66,"end_s":24066.803,"action":"Pressed Escape, scrolled, typed “cm,” and clicked near the right wall while Revit entered Place Component mode with a shower-head fixture selected; a Warning window appeared at the end.","intent":"Prepare or attempt placement of a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"Selected family shown as Plumbing_Fixtures_Shower_Head_Metal_Shower_Head."},{"start_s":24066.803,"end_s":24076.885,"action":"Switched back from the Warning window, pressed Escape, clicked the view area, and changed from Floor Plan: GL to the {3D} view; briefly scrolled and middle-clicked in the model.","intent":"Dismiss the warning and inspect the model in 3D.","app":"Autodesk Revit","details":"A warning stated that created elements may not be visible in the Floor Plan: GL view."},{"start_s":24076.885,"end_s":24087.269,"action":"Middle-clicked and scrolled repeatedly in the 3D view, navigating from an overall building view to a closer overhead view of the modeled rooms and walls.","intent":"Navigate and inspect the building model in 3D.","app":"Autodesk Revit","details":"The 3D view changed from a distant overview to a closer top-oriented view."},{"start_s":24087.269,"end_s":24097.225,"action":"Middle-clicked and scrolled through the 3D model, zooming and repositioning around rooms, windows, doors, and a stair area; then clicked and pressed Space while the view/window briefly changed size.","intent":"Continue inspecting detailed building geometry in 3D.","app":"Autodesk Revit","details":"The view ended on a close-up of interior rooms and windows."},{"start_s":24097.225,"end_s":24107.137,"action":"Scrolled and clicked to return to Floor Plan: GL, then navigated and zoomed out to show the wider apartment layout including bedrooms, toilets, dining, kitchen, and utility areas; clicked and dragged near the lower view before the span ended.","intent":"Return to the floor plan and review the overall layout.","app":"Autodesk Revit","details":"The final view showed the labeled apartment plan with Toilet-1, Toilet-2, bedrooms, dining, kitchen, and utility spaces."},{"start_s":24107.137,"end_s":24115.069,"action":"Resized the Autodesk Revit window, clicked in the floor plan near Toilet-1, and pressed Tab three times to cycle or inspect selectable elements.","intent":"Inspect or cycle through nearby floor-plan elements.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible; the selection context changed to doors near Toilet-1."},{"start_s":24115.069,"end_s":24125.221,"action":"Clicked near the left side of the floor plan twice, then clicked near the Electrical Room area twice, leaving the plan in an active constraint or geometry interaction state.","intent":"Select or adjust floor-plan geometry.","app":"Autodesk Revit","details":"The floor plan remained visible with temporary selection markers and a constraint-related status message."},{"start_s":24125.221,"end_s":24137.427,"action":"Scrolled within the Revit view and then clicked and dragged near the upper wall area, zooming into the Bed Room-1 and Toilet-1 region.","intent":"Navigate to and work on detailed geometry near Toilet-1.","app":"Autodesk Revit","details":"The view changed from the full apartment plan to a close-up of Bed Room-1 and Toilet-1."},{"start_s":24137.427,"end_s":24150.118,"action":"Scrolled and interacted with the close-up around Toilet-1, resized and briefly hid or restored the Revit window, pressed Escape, and switched to the Type Properties window.","intent":"Inspect or modify the selected floor-plan element's type properties.","app":"Autodesk Revit","details":"The selected context indicated a disabled toilet arrangement, and the span ended with the Type Properties window active."},{"start_s":24150.118,"end_s":24160.743,"action":"Returned to the main Revit floor plan, clicked the Toilet-1 fixture area, and used keyboard navigation while the plumbing fixture became selected.","intent":"Select and inspect the disabled toilet arrangement fixture.","app":"Autodesk Revit","details":"The Properties panel identified WC_-Disabled, Disabled Toilet Arrangement; the plumbing fixture was highlighted in Toilet-1."},{"start_s":24160.743,"end_s":24179.806,"action":"Dragged and scrolled through the Revit model, switching from the floor plan to a 3D view, then selected a wall near the bathroom and zoomed or navigated to its close-up.","intent":"Inspect the selected bathroom wall and surrounding model geometry in 3D.","app":"Autodesk Revit","details":"The final view showed a selected Curtain Wall/Curtain_Wall-Empty in a detailed 3D bathroom area."},{"start_s":24179.806,"end_s":24193.362,"action":"Switched to Revit, navigated the 3D view by scrolling, then changed to the GL floor plan and adjusted the view with additional scrolling and clicks.","intent":"Inspect the model in 3D and floor-plan views.","app":"Autodesk Revit","details":null},{"start_s":24193.362,"end_s":24203.405,"action":"Activated Place Component, selected the Plumbing_Fixtures_Sink_Cloakroom family from the recent types list, and positioned the view around the toilet and pooja area before cancelling the placement mode.","intent":"Prepare a plumbing fixture for placement in the GL floor plan.","app":"Autodesk Revit","details":"The selected type was Plumbing_Fixtures_Sink_Cloakroom, sized 440x350x120mm."},{"start_s":24203.405,"end_s":24214.884,"action":"Exited placement mode and panned across the GL floor plan to review the dining, kitchen, utility, balcony, and toilet areas.","intent":"Inspect the floor-plan layout and fixture locations.","app":"Autodesk Revit","details":null},{"start_s":24214.884,"end_s":24224.857,"action":"Zoomed and panned around the floor plan, reviewing the overall apartment and then the bedroom, dining, kitchen, and toilet areas.","intent":"Review the apartment plan at different scales.","app":"Autodesk Revit","details":null},{"start_s":24224.857,"end_s":24234.682,"action":"Clicked in the Toilet-2 area, briefly entered component placement with the sink fixture selected, then cancelled and returned to the normal floor-plan view.","intent":"Inspect or prepare a sink fixture near Toilet-2.","app":"Autodesk Revit","details":"The view remained centered on Toilet-2, the kitchen sink, and the utility area."},{"start_s":24234.682,"end_s":24250.008,"action":"Entered wall placement mode and moved over the Toilet-2 area, then cancelled and re-entered Place Component with the sink fixture selected.","intent":"Switch between wall and component placement while editing the Toilet-2 area.","app":"Autodesk Revit","details":"The final state showed Place Component active with Plumbing_Fixtures_Sink_Cloakroom selected."},{"start_s":24250.008,"end_s":24263.242,"action":"Switched to Autodesk Revit, adjusted the floor-plan view, and clicked within the toilet area while the Place Component tool remained active.","intent":"Position or place a plumbing component in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL showed Toilet-2 and adjacent kitchen fixtures."},{"start_s":24263.242,"end_s":24274.006,"action":"Browsed the component list, selected Plumbing_Fixtures_Shower_Head with the Metal_Shower_Head type, zoomed into the floor plan, and entered 4 before confirming.","intent":"Configure and position a shower-head component.","app":"Autodesk Revit","details":"The selected shower-head family was active near the bathroom area."},{"start_s":24274.006,"end_s":24284.101,"action":"Dismissed warning and transient prompts, then switched from Floor Plan: GL to the {3D} view and navigated the model.","intent":"Continue reviewing the model in three dimensions after the placement attempt.","app":"Autodesk Revit","details":"A warning stated that created elements were not visible in Floor Plan: GL."},{"start_s":24284.101,"end_s":24294.488,"action":"Navigated the 3D model with repeated middle-button drags and scrolls, changing the view across the apartment layout.","intent":"Inspect the overall 3D building model.","app":"Autodesk Revit","details":"The 3D view showed rooms, furniture, bathrooms, and circulation areas."},{"start_s":24294.488,"end_s":24306.052,"action":"Continued orbiting and zooming the 3D model, moving from the overall apartment toward bedrooms and bathrooms.","intent":"Inspect specific modeled rooms and fixtures.","app":"Autodesk Revit","details":"The view alternated between an overall plan-like perspective and closer room views."},{"start_s":24306.052,"end_s":24315.874,"action":"Further orbited and zoomed the 3D view toward a bathroom, ending on a close view of the tiled room and a wall-mounted fixture.","intent":"Examine bathroom elements in the 3D model.","app":"Autodesk Revit","details":"A wall or fixture was highlighted in blue in the final close-up."},{"start_s":24315.874,"end_s":24326.918,"action":"Selected the sink plumbing fixture and edited its elevation value, entering a revised feet-and-inches measurement; the 3D view updated to show the fixture in the room.","intent":"Adjust the sink fixture elevation.","app":"Autodesk Revit","details":null},{"start_s":24326.918,"end_s":24336.455,"action":"Changed the selected sink fixture elevation to 3 feet and adjusted the 3D view with scrolling; returned to a top-oriented view of the bathroom floor.","intent":"Position the sink fixture at the desired height and inspect it.","app":"Autodesk Revit","details":null},{"start_s":24336.455,"end_s":24346.292,"action":"Scrolled and navigated across the model, then exited the active fixture selection and continued viewing the overall floor layout in 3D.","intent":"Review the fixture placement in the broader model.","app":"Autodesk Revit","details":null},{"start_s":24346.292,"end_s":24362.155,"action":"Navigated and zoomed through the 3D model, switched to the GL floor plan, and left the plan centered on the bathroom and adjacent dining area.","intent":"Inspect the corresponding floor-plan layout.","app":"Autodesk Revit","details":null},{"start_s":24362.155,"end_s":24368.117,"action":"Scrolled and navigated the GL floor plan, then selected a shower-head plumbing fixture from the component tools; the plan remained focused on Toilet-2 and the kitchen area.","intent":"Prepare to place or adjust a shower-head fixture.","app":"Autodesk Revit","details":null},{"start_s":24368.117,"end_s":24378.116,"action":"Returned to the GL floor plan, selected the sink plumbing fixture, and edited its elevation from 4 feet to 3 feet; the fixture and connected wall edges became highlighted in the plan.","intent":"Adjust the sink fixture elevation in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":24378.116,"end_s":24397.638,"action":"Navigated the Revit floor plan, scrolled and tabbed through controls, then activated component placement and selected a sink fixture type.","intent":"Prepare a plumbing fixture for placement in the floor plan.","app":"Autodesk Revit","details":"The view ended zoomed near the kitchen, dining area, and M. toilet with Place Component active."},{"start_s":24397.638,"end_s":24403.792,"action":"Scrolled through the open component type list while keeping the sink fixture placement tool active.","intent":"Review available component types before choosing a fixture.","app":"Autodesk Revit","details":"The list displayed plumbing fixtures including sink and shower-head types."},{"start_s":24403.792,"end_s":24410.037,"action":"Selected the Plumbing_Fixtures_Shower_Head type, entered an elevation value of 4, and confirmed it; Revit then displayed a warning while the fixture remained ready to place.","intent":"Configure the shower-head elevation for placement.","app":"Autodesk Revit","details":"The selected type was Metal_Shower_Head and the elevation field showed 4.0000."},{"start_s":24410.037,"end_s":24414.572,"action":"Scrolled and zoomed the floor plan, then positioned the active shower-head component near the M. toilet and balcony area.","intent":"Find a suitable location for the configured fixture.","app":"Autodesk Revit","details":"A warning noted that some created elements were not visible in the Floor Plan: GL view."},{"start_s":24414.572,"end_s":24423.013,"action":"Exited the active placement operation, zoomed the plan, and returned to the general floor-plan view while the Revit window was resized and repositioned.","intent":"Stop placing the fixture and inspect the overall plan.","app":"Autodesk Revit","details":"The view showed the full apartment layout with the warning still visible."},{"start_s":24423.013,"end_s":24433.844,"action":"Scrolled slightly, clicked near the M. toilet, and left Revit in a multi-selection/modify state after window resizing and an Escape keypress.","intent":"Inspect or select geometry around the M. toilet area.","app":"Autodesk Revit","details":"The final view remained on the apartment floor plan with the M. toilet highlighted and no placement dialog open."},{"start_s":24433.844,"end_s":24444.247,"action":"Pressed Escape and interacted with the selected disabled toilet fixture in the GL floor plan while the Revit window repeatedly hid and reappeared; left the fixture selected.","intent":"Continue reviewing or adjusting the selected plumbing fixture.","app":"Autodesk Revit","details":"GL floor plan shows a selected WC_-Disabled fixture near the M.TOILET."},{"start_s":24444.247,"end_s":24455.845,"action":"Clicked in the floor plan, pressed Escape several times, then selected the {3D} view; Revit began loading the 3D model and changed the title to 3D View.","intent":"Switch from the GL floor plan to a three-dimensional model view.","app":"Autodesk Revit","details":"The 3D view displayed a loading spinner by the end of the span."},{"start_s":24455.845,"end_s":24462.113,"action":"Navigated the loaded 3D model with middle-clicks and scroll gestures, leaving an isometric view of the building walls and rooms visible.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"The 3D view showed multiple brick-walled rooms, doors, windows, and stairs."},{"start_s":24462.113,"end_s":24474.574,"action":"Waited in the 3D view and made two scroll gestures; the isometric building model remained visible without an evident view change.","intent":"Continue reviewing the 3D model.","app":"Autodesk Revit","details":null},{"start_s":24474.574,"end_s":24482.515,"action":"Scrolled and middle-clicked in the 3D view, then clicked the GL view tab to return to the floor plan.","intent":"Return from the 3D inspection to the GL floor plan.","app":"Autodesk Revit","details":"The title changed to Floor Plan: GL, and the floor-plan canvas began loading."},{"start_s":24482.515,"end_s":24502.229,"action":"Scrolled through the GL floor plan, zooming out from a kitchen and toilet area to a broader layout of the first-floor apartment blocks, then clicked near the lower-right area of the canvas.","intent":"Review the broader first-floor layout at different zoom levels.","app":"Autodesk Revit","details":"The final view showed multiple furnished units, shared circulation space, and the BLOCK-A-FIRST-FLOOR plan."},{"start_s":24502.229,"end_s":24513.29,"action":"Opened Revit’s Load Autodesk Family dialog, focused the search field, and entered “sofa.”","intent":"Search for a sofa family to load into the project.","app":"Autodesk Revit","details":"The family browser initially displayed Plumbing results."},{"start_s":24513.29,"end_s":24529.16,"action":"Browsed family categories, selected Furniture, and clicked Load; Revit began downloading the selected furniture families.","intent":"Locate and load a furniture family.","app":"Autodesk Revit","details":"The browser showed Furniture results with chair thumbnails and a Downloading Families dialog."},{"start_s":24529.16,"end_s":24538.06,"action":"Returned to the floor plan, entered “cm,” and activated placement mode for the Furniture_Chair_Viper family.","intent":"Prepare the selected furniture component for placement in the floor plan.","app":"Autodesk Revit","details":"The ribbon showed Modify | Place Component and the chair family was selected."},{"start_s":24538.06,"end_s":24548.14,"action":"Placed or attempted to place the chair component in the drawing room area, zoomed the floor plan, and pressed Escape while the view and window state changed.","intent":"Position the furniture component on the floor plan.","app":"Autodesk Revit","details":"The view became zoomed into the drawing room and nearby furniture."},{"start_s":24548.14,"end_s":24557.317,"action":"Continued navigating the zoomed plan, then switched from the floor plan to the project’s 3D view.","intent":"Inspect the project model in three dimensions.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}."},{"start_s":24557.317,"end_s":24575.665,"action":"Navigated the 3D model with middle-button movement and scrolling, changing the viewpoint across the building and ending with a broader view of the rooms.","intent":"Review the model layout and furniture placement in 3D.","app":"Autodesk Revit","details":"The 3D view displayed multiple rooms, walls, bedrooms, bathrooms, dining areas, and stairs."},{"start_s":24575.665,"end_s":24579.904,"action":"Opened File Explorer briefly, then returned to Autodesk Revit and dismissed the “File Changed Since Last Save” prompt.","intent":"Return to the Revit project after checking the file window.","app":"Windows Explorer; Autodesk Revit","details":"Revit remained on the PROJECT 11 3D view."},{"start_s":24579.904,"end_s":24583.931,"action":"Switched to File Explorer, opened Downloads, selected the PROJECT 11 file, and returned to Revit, where a Model Upgrade dialog appeared and was dismissed.","intent":"Open or reload the PROJECT 11 Revit model.","app":"Windows Explorer; Autodesk Revit","details":"The dialog stated that the model would be upgraded from Autodesk Revit 2016 to Revit 2025."},{"start_s":24583.931,"end_s":24590.05,"action":"Waited through Revit window changes as the model and a furniture family loaded, ending in the Family Editor with a 3D table visible; clicked Load into Project.","intent":"Load the furniture family into the project.","app":"Autodesk Revit","details":"The active family was “Escritorio_de_estudiante_de_600x740mm,” shown as a table-like furniture object."},{"start_s":24590.05,"end_s":24601.81,"action":"Returned to PROJECT 11’s GL floor plan and placed the loaded furniture component in the drawing room area.","intent":"Insert the loaded furniture family into the project floor plan.","app":"Autodesk Revit","details":"The floor plan entered Modify | Place Component mode and showed the selected furniture type in the Properties panel."},{"start_s":24601.81,"end_s":24608.561,"action":"Zoomed or scrolled out to review the broader floor plan, then pressed Escape repeatedly to exit placement or other active commands.","intent":"Review the furniture placement context and exit the placement tool.","app":"Autodesk Revit","details":"The view showed multiple apartment layouts with the furniture family still indicated in the status area."},{"start_s":24608.561,"end_s":24628.561,"action":"Remained on the GL floor plan with the view centered on the dining, kitchen, bedroom, toilet, and balcony area; made minor window-position changes without further visible editing.","intent":"Review the resulting floor plan.","app":"Autodesk Revit","details":"The visible plan included labeled DINING, KITCHEN, M.BED ROOM, M.TOILET, and a 5' 6\" wide balcony."},{"start_s":24628.561,"end_s":24638.208,"action":"Scrolled through the Revit floor plan, then pressed a keyboard shortcut and left the application hidden.","intent":"Review the floor plan before switching views.","app":"Autodesk Revit","details":"The floor plan remained visible until the application was hidden near the end of the span."},{"start_s":24638.208,"end_s":24645.513,"action":"Resized and toggled the Revit window, clicked the view area, and switched from the floor plan to the 3D view.","intent":"Open and activate the project’s 3D view.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}; the 3D canvas was initially blank while loading."},{"start_s":24645.513,"end_s":24657.251,"action":"Scrolled in the 3D view to zoom out and reveal more of the furnished building model.","intent":"Inspect the overall 3D building layout.","app":"Autodesk Revit","details":"The 3D model became visible and was reduced to a smaller overall view."},{"start_s":24657.251,"end_s":24676.385,"action":"Scrolled and used middle-button navigation in the 3D view, repositioning and changing the zoom of the building model.","intent":"Navigate around the 3D model for inspection.","app":"Autodesk Revit","details":"The model shifted between wider and closer views while remaining in the 3D view."},{"start_s":24676.385,"end_s":24684.774,"action":"Continued middle-button navigation and scrolling, rotating or repositioning the 3D model to inspect another portion of the building.","intent":"Examine additional areas of the 3D building model.","app":"Autodesk Revit","details":"The displayed model orientation and framing changed substantially during navigation."},{"start_s":24684.774,"end_s":24695.361,"action":"Scrolled repeatedly and used middle-button navigation to zoom into and move across the 3D building, ending on a closer view of furnished rooms and corridors.","intent":"Inspect interior spaces in greater detail.","app":"Autodesk Revit","details":"The final view showed a closer partial section of the building with rooms, furniture, stairs, and corridors."},{"start_s":24695.361,"end_s":24699.541,"action":"Repositioned and resized the Revit window, then entered floor boundary edit mode for the selected floor.","intent":"Prepare the selected floor boundary for inspection or editing.","app":"Autodesk Revit","details":"Selected floor: LIFT FLOORING 2 on level GL."},{"start_s":24699.541,"end_s":24713.515,"action":"Zoomed out repeatedly in the 3D view while keeping the floor boundary sketch active, revealing more of the building layout.","intent":"Inspect the floor boundary in the context of the overall model.","app":"Autodesk Revit","details":"Remained in Modify Floors > Edit Boundary mode."},{"start_s":24713.515,"end_s":24726.03,"action":"Panned and zoomed the 3D view across the building while reviewing the active floor boundary sketch.","intent":"Navigate to and inspect different areas of the floor boundary.","app":"Autodesk Revit","details":"No boundary geometry change is visibly confirmed."},{"start_s":24726.03,"end_s":24735.657,"action":"Continued panning and zooming through the 3D floor plan, moving across rooms and corridors with the boundary sketch active.","intent":"Review additional portions of the floor boundary.","app":"Autodesk Revit","details":"No confirmed edit to the boundary geometry."},{"start_s":24735.657,"end_s":24748.075,"action":"Zoomed and panned around the active floor boundary, then zoomed out to a broader building view.","intent":"Continue visual inspection of the floor boundary and surrounding model.","app":"Autodesk Revit","details":"Edit Boundary mode remained active."},{"start_s":24748.075,"end_s":24759.315,"action":"Switched away briefly and returned to Revit, then zoomed and panned across the floor plan to inspect several boundary segments.","intent":"Continue navigating and reviewing the floor boundary sketch.","app":"Autodesk Revit","details":"The Revit view remained in Modify Floors > Edit Boundary mode; no confirmed geometry modification."},{"start_s":24759.315,"end_s":24774.943,"action":"Scrolled repeatedly in the Revit 3D view, zooming out from a close-up floor layout to a broader view of the building.","intent":"Review the overall model layout.","app":"Autodesk Revit","details":null},{"start_s":24774.943,"end_s":24785.08,"action":"Scrolled in the 3D view to zoom back in, then clicked within the view, ending on a closer view of the floor layout.","intent":"Inspect a specific area of the model.","app":"Autodesk Revit","details":null},{"start_s":24785.08,"end_s":24795.255,"action":"Clicked the selected floor area and adjusted the Revit window, leaving the floor selected in Modify Floors mode.","intent":"Select and edit the floor element.","app":"Autodesk Revit","details":"The selected floor is identified as LIFT FLOORING 2."},{"start_s":24795.255,"end_s":24804.085,"action":"Repeatedly clicked and briefly dragged in the floor-editing controls, toggling the selected floor boundary/edit state while the view remained focused on the same rooms.","intent":"Modify or inspect the floor boundary.","app":"Autodesk Revit","details":"The floor remains in Modify Floors and Edit Boundary context."},{"start_s":24804.085,"end_s":24824.085,"action":"Paused on the Revit floor-editing view, then clicked a wall element near the top of the model.","intent":"Inspect an adjacent building element.","app":"Autodesk Revit","details":"The clicked element is shown as a selected basic wall."},{"start_s":24824.085,"end_s":24834.701,"action":"Adjusted the Revit window, scrolled and zoomed into the selected wall and nearby openings, then switched to Windows Explorer.","intent":"Inspect the wall area and move to file browsing.","app":"Autodesk Revit","details":"The final event switches the active application to Windows Explorer."},{"start_s":24834.701,"end_s":24844.438,"action":"Switched to Autodesk Revit, scrolled and navigated the 3D model, then clicked within the floor view while changing the view scale.","intent":"Inspect the building model and locate a floor element for editing.","app":"Autodesk Revit","details":"A selected floor remained visible in the 3D view."},{"start_s":24844.438,"end_s":24854.729,"action":"Navigated and zoomed the 3D model, selected the wide balcony floor, and entered Edit Boundary mode.","intent":"Edit the boundary of the selected balcony floor.","app":"Autodesk Revit","details":"The selected element was labeled WIDE BALCONY and the boundary-editing tools were active."},{"start_s":24854.729,"end_s":24864.529,"action":"Selected another floor area, navigated through the 3D view, and entered boundary editing for the OUTDOOR FLOORING element.","intent":"Inspect and modify the outdoor flooring boundary.","app":"Autodesk Revit","details":"The OUTDOOR FLOORING element was selected with its boundary highlighted in magenta."},{"start_s":24864.529,"end_s":24878.676,"action":"Dragged a boundary sketch edge and adjusted the OUTDOOR FLOORING boundary while zooming and panning around the 3D view.","intent":"Reshape the outdoor flooring boundary.","app":"Autodesk Revit","details":"A boundary sketch line and temporary dimensions were visible; the sketch remained in edit mode."},{"start_s":24878.676,"end_s":24883.036,"action":"Switched briefly through Windows Explorer and returned to Revit, leaving the OUTDOOR FLOORING selected in the 3D view.","intent":"Return to the model after a brief application switch and review the edited floor.","app":"Autodesk Revit","details":"The outdoor flooring appeared highlighted cyan in the model."},{"start_s":24883.036,"end_s":24898.704,"action":"Navigated and zoomed the Revit 3D model, clicked model elements, then switched back to the standard Modify view and continued inspecting the building.","intent":"Review the model and exit boundary-editing context.","app":"Autodesk Revit","details":"The final view showed the broader building layout with the Modify ribbon active."},{"start_s":24898.704,"end_s":24908.57,"action":"Switched to Autodesk Revit and restored/resized the project window, leaving the 3D view of the furnished building visible.","intent":"Return to and arrange the Revit project view.","app":"Autodesk Revit","details":null},{"start_s":24908.57,"end_s":24918.683,"action":"Scrolled and navigated within the Revit 3D view, zooming toward a building area; clicked an object that became highlighted as a lavatory specialty equipment element.","intent":"Inspect a specific building component in the 3D model.","app":"Autodesk Revit","details":"The final view shows a selected lavatory element."},{"start_s":24918.683,"end_s":24936.911,"action":"Continued panning, scrolling, and zooming through the Revit 3D model, moving from a close-up furnishing view to a broader furnished floor view before switching toward Windows Explorer.","intent":"Review different areas of the building model.","app":"Autodesk Revit","details":"The span ends as Windows Explorer is activated."},{"start_s":24936.911,"end_s":24947.697,"action":"Returned to Revit, navigated the 3D view, and selected a wall and then a floor; the floor entered modification context and was shown highlighted.","intent":"Inspect and begin editing model floor elements.","app":"Autodesk Revit","details":"The selected floor is identified as LOBBY in the Properties panel."},{"start_s":24947.697,"end_s":24956.251,"action":"Entered Edit Boundary mode for the selected floor, then navigated and selected another floor area; the view ended with OUTDOOR FLOORING selected.","intent":"Inspect or edit floor boundary geometry.","app":"Autodesk Revit","details":"The ribbon shows Modify | Floors > Edit Boundary, and the selected floor changes from LOBBY to OUTDOOR FLOORING."},{"start_s":24956.251,"end_s":24967.988,"action":"Scrolled extensively through the 3D view while remaining in Edit Boundary mode, moving across the building and ending on a broader view with the BEDROOM floor selected.","intent":"Review floor boundary context across the model.","app":"Autodesk Revit","details":"The Properties panel identifies the selected floor as BEDROOM."},{"start_s":24967.988,"end_s":24978.485,"action":"Scrolled and middle-clicked in the Revit 3D view, then clicked near the upper-right window area; the view changed from a broad floor layout to a closer model view while the window was briefly moved and resized.","intent":"Navigate and adjust the Revit model view.","app":"Autodesk Revit","details":"Floor BEDROOM was selected in the 3D view."},{"start_s":24978.485,"end_s":24986.905,"action":"Scrolled repeatedly in the Revit 3D view, zooming and panning across the floor model until most geometry moved off-screen and only a partial edge remained visible.","intent":"Inspect different areas of the 3D model.","app":"Autodesk Revit","details":"The selected floor remained active while the view became largely empty."},{"start_s":24986.905,"end_s":24994.808,"action":"Continued scrolling and middle-clicked in the 3D view, moving the model across the canvas; the view ended zoomed out to show most of the floor layout again.","intent":"Reposition and review the Revit model.","app":"Autodesk Revit","details":"No modeling command or property change was visible."},{"start_s":24994.808,"end_s":25004.458,"action":"Scrolled to zoom farther out, then clicked near the lower-right canvas area; the floor layout became smaller and the interface returned to a general 3D View selection state.","intent":"Adjust the overall 3D view and selection state.","app":"Autodesk Revit","details":"The Properties panel showed 3D View after the click."},{"start_s":25004.458,"end_s":25018.17,"action":"Middle-clicked and scrolled through the Revit 3D view, panning and zooming from a broad floor layout into close views of rooms and exterior edges.","intent":"Inspect model details in different areas.","app":"Autodesk Revit","details":"The 3D View properties remained displayed."},{"start_s":25018.17,"end_s":25028.006,"action":"Scrolled slightly, clicked the model, and clicked near the upper-right window area while the Revit window was briefly moved or hidden; the final click selected a floor labeled OUTDOOR FLOORING.","intent":"Select and inspect a different floor element.","app":"Autodesk Revit","details":"The selected floor properties showed OUTDOOR FLOORING."},{"start_s":25028.006,"end_s":25036.217,"action":"Navigated the Revit 3D floor model with scrolls and clicks, zooming from the overall layout into a dining-area floor and selecting the floor element.","intent":"Inspect and select a floor area in the 3D model.","app":"Autodesk Revit","details":"The selected floor was shown as OUTDOOR FLOORING, then the view focused on a dining area."},{"start_s":25036.217,"end_s":25045.394,"action":"Entered floor boundary editing for the selected DINING FLOOR, then zoomed out to review the floor layout across the building.","intent":"Edit or review the dining floor boundary.","app":"Autodesk Revit","details":"The ribbon displayed Modify | Floors > Edit Boundary, and the final view showed the floor plan at a wider scale."},{"start_s":25045.394,"end_s":25055.592,"action":"Navigated across the 3D model with repeated middle-button clicks and scrolls, moving from the broader layout to a closer bedroom-area view and selecting a bedroom floor.","intent":"Inspect another floor area in the model.","app":"Autodesk Revit","details":"The final view highlighted a BEDROOM floor in cyan."},{"start_s":25055.592,"end_s":25065.424,"action":"Selected the BEDROOM floor, then zoomed and panned out to review more of the multi-room building layout.","intent":"Review the selected bedroom floor in context.","app":"Autodesk Revit","details":"The bedroom floor was outlined in magenta before the view expanded to show multiple rooms."},{"start_s":25065.424,"end_s":25075.503,"action":"Zoomed and navigated to another furnished room, selected a floor or furniture-related element, then entered floor boundary editing for DRAWING FLOOR and adjusted the view.","intent":"Inspect and edit a floor boundary in the 3D model.","app":"Autodesk Revit","details":"The ribbon showed Modify | Floors > Edit Boundary, with DRAWING FLOOR selected in the Properties panel."},{"start_s":25075.503,"end_s":25085.554,"action":"Selected and inspected bedroom floor regions while panning and zooming through the 3D model, ending on a lower portion of the building layout.","intent":"Review floor areas and their surrounding rooms.","app":"Autodesk Revit","details":"The BEDROOM floor remained selected in the earlier view; no completed boundary change is visible."},{"start_s":25085.554,"end_s":25098.391,"action":"Scrolled the 3D Revit view, selected the railing, and edited the visible railing property field before entering 150 mm and confirming it.","intent":"Adjust the selected railing parameter.","app":"Autodesk Revit","details":"The selected railing is Glass_Panel-Bottom_Fill on level GL."},{"start_s":25098.391,"end_s":25108.995,"action":"Scrolled the model and used undo commands; Revit then displayed the floor in boundary-edit mode in the 3D view.","intent":"Review or revert the recent model edit.","app":"Autodesk Revit","details":"The floor boundary for BEDROOM is visible with a magenta outline."},{"start_s":25108.995,"end_s":25119.416,"action":"Scrolled and zoomed around the model, selected the bedroom floor, then returned to the railing and selected its property field.","intent":"Navigate between the floor and railing elements for further editing.","app":"Autodesk Revit","details":"The view alternated between a zoomed-out floor layout and the selected Glass_Panel-Bottom_Fill railing."},{"start_s":25119.416,"end_s":25128.76,"action":"Entered 150 mm in the selected railing property field and confirmed the value, then clicked in the 3D view to inspect the result.","intent":"Set the railing parameter to 150 mm.","app":"Autodesk Revit","details":"The railing remained selected in the 3D view after confirmation."},{"start_s":25128.76,"end_s":25136.836,"action":"Scrolled and navigated the 3D view from the railing close-up to an exterior elevation, then used middle-click navigation to reposition the view.","intent":"Inspect the railing and surrounding exterior from different viewpoints.","app":"Autodesk Revit","details":"The exterior brick wall, windows, door, and balcony railing became visible."},{"start_s":25136.836,"end_s":25147.307,"action":"Scrolled across the exterior elevation and used middle-click navigation to rotate the 3D model toward the rear/interior-facing side.","intent":"Review the model from additional exterior angles.","app":"Autodesk Revit","details":"The final view shows the brick-walled building mass and interior partitions from an oblique rear angle."},{"start_s":25147.307,"end_s":25156.981,"action":"Navigated the Revit 3D view with repeated middle-button orbit/zoom gestures and selected the balcony railing, then returned to a wider building view.","intent":"Inspect the railing and surrounding building model from different viewpoints.","app":"Autodesk Revit","details":"The selected railing was highlighted cyan in the initial close view; the final view showed a wider portion of the brick building."},{"start_s":25156.981,"end_s":25167.179,"action":"Orbited and zoomed the Revit 3D view around the balcony, briefly showing the selected railing close up before pulling back to an overall building view.","intent":"Review the balcony railing in relation to the building layout.","app":"Autodesk Revit","details":"The railing appeared highlighted cyan in the close view, while the final view showed multiple rooms and balconies."},{"start_s":25167.179,"end_s":25177.443,"action":"Zoomed and navigated around the balcony, selected nearby model elements, and then pulled back to a broad 3D view of the building.","intent":"Inspect model elements around the balcony and compare them with the wider building.","app":"Autodesk Revit","details":"The close view showed the balcony railing and chairs; the final view displayed much of the brick building."},{"start_s":25177.443,"end_s":25187.294,"action":"Continued orbiting and zooming through the Revit model, moving from the balcony area to other rooms and ending on another broad building view before switching applications.","intent":"Review different portions of the building model in 3D.","app":"Autodesk Revit","details":"The span ended with an application switch to Windows Explorer."},{"start_s":25187.294,"end_s":25195.707,"action":"Returned to the Revit 3D view and continued orbiting and zooming around the building interior and balcony, eventually moving the camera away so the model was mostly out of view.","intent":"Continue inspecting the building model from multiple viewpoints.","app":"Autodesk Revit","details":"The view transitioned from a visible room-and-balcony area to a mostly empty canvas with only part of the model visible."},{"start_s":25195.707,"end_s":25205.632,"action":"Navigated back toward the balcony with scroll and drag gestures, selected model elements, resized or repositioned the Revit window, and pressed Escape several times; the final view showed the balcony railing selected beside the dining area.","intent":"Inspect and select the balcony railing and nearby furniture in the 3D model.","app":"Autodesk Revit","details":"The final Properties panel identified the selected railing as Glass_Panel-Bottom_Fill."},{"start_s":25205.632,"end_s":25222.086,"action":"Navigated and zoomed the Revit 3D view through several scrolls and middle-clicks, changing from a distant building overview to a close-up of the brick exterior and balcony.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":null},{"start_s":25222.086,"end_s":25236.173,"action":"Switched briefly through Windows Explorer and the recorder, returned to Revit, opened the GL floor plan, and scrolled the view until the plan display became temporarily blank.","intent":"Move from the 3D view to the GL floor plan for inspection.","app":"Autodesk Revit","details":"The Revit title changed to Floor Plan: GL."},{"start_s":25236.173,"end_s":25242.963,"action":"Used Tab and Escape, clicked within the GL floor plan, and scrolled to reposition it; selected the dining table furniture, which became highlighted in blue, then switched to Windows Explorer.","intent":"Inspect and select an element in the floor plan before changing applications.","app":"Autodesk Revit","details":"The floor plan visibly showed labeled rooms and a selected dining table set."},{"start_s":25242.963,"end_s":25251.003,"action":"Switched through the recorder and the Downloads folder, then returned to Revit and opened the sofa family document, displaying a 3D green sofa model in the Family Editor.","intent":"Locate or open a furniture family for use in the project.","app":"Autodesk Revit","details":"The opened family was titled LR1697_SOFA_04."},{"start_s":25251.003,"end_s":25257.654,"action":"Returned to the project floor plan, waited through several window visibility changes, and activated Place Component mode after clicking near the lower edge of the plan.","intent":"Prepare to place the opened sofa family into the project.","app":"Autodesk Revit","details":"The interface showed Modify | Place Component with the plan canvas still blank/loading."},{"start_s":25257.654,"end_s":25262.072,"action":"Switched to Downloads, opened the BIMobject-Furniture Sofas KOKUYO Milo folder and its nested Furniture Sofas KOKUYO Milo folder, then returned to Revit; a Model Upgrade dialog appeared and remained open.","intent":"Browse downloaded sofa assets and continue loading a furniture family into the Revit project.","app":"Windows Explorer and Autodesk Revit","details":"Revit warned that the model would be upgraded from Autodesk Revit 2021 to 2025 and offered Upgrade the model or Cancel the upgrade."},{"start_s":25262.072,"end_s":25266.744,"action":"Displayed Revit's Model Upgrade dialog while the project upgraded from Autodesk Revit 2021 to 2025, then switched to the sofa family preview.","intent":"Allow the Revit project and family content to open in the current version.","app":"Autodesk Revit","details":"The upgrade dialog remained visible; the title later changed to Furniture_Sofas_KOKUYO_Milo - 3D View: Preview."},{"start_s":25266.744,"end_s":25271.412,"action":"Opened Windows Explorer to the Furniture Sofas KOKUYO Milo folder, then returned to the Revit family preview and selected Load into Project.","intent":"Load the sofa family into the project.","app":"Windows Explorer and Autodesk Revit","details":"Explorer showed the Furniture_Sofas_KOKUYO_Milo Revit family and KOKUYO_LAMEX application."},{"start_s":25271.412,"end_s":25291.139,"action":"Returned to the project floor plan, navigated the view, and opened the Load Autodesk Family dialog from the Insert workflow.","intent":"Choose additional furniture content for placement in the project.","app":"Autodesk Revit","details":"The family placement context was active before the family browser opened."},{"start_s":25291.139,"end_s":25300.928,"action":"Reviewed the Furniture results in the Load Autodesk Family browser, selected a family, and started downloading it; the download dialog reached 100%.","intent":"Download and load a selected furniture family.","app":"Autodesk Revit","details":"The family browser displayed 113 Furniture results and a Downloading Families dialog."},{"start_s":25300.928,"end_s":25313.542,"action":"Returned to the floor plan with Furniture_Crescent_Armchair selected, navigated and zoomed into the Drawing room, and positioned the armchair preview for placement.","intent":"Place the downloaded armchair family in the Drawing room.","app":"Autodesk Revit","details":"The status bar indicated that a free instance was ready to place."},{"start_s":25313.542,"end_s":25323.898,"action":"Clicked to place a second armchair beside the first in the Drawing room, then pressed Escape repeatedly to end placement and return to the normal floor-plan state.","intent":"Arrange a pair of armchairs and finish the placement command.","app":"Autodesk Revit","details":"Two armchairs remained visible along the upper wall of the Drawing room."},{"start_s":25323.898,"end_s":25333.621,"action":"Restored Autodesk Revit and navigated the 3D view by middle-clicking and scrolling, changing from a blank canvas to an overview of the furnished building model.","intent":"Inspect the 3D building model.","app":"Autodesk Revit","details":null},{"start_s":25333.621,"end_s":25344.653,"action":"Pressed Escape and navigated within the 3D model using middle-clicks and scrolling, moving from the overall building view to close views of furnished rooms and then across the floor layout.","intent":"Review model areas and furnishings.","app":"Autodesk Revit","details":null},{"start_s":25344.653,"end_s":25354.688,"action":"Navigated the model and switched from the 3D view to the GL floor plan, then zoomed and panned from a close drawing-room view to a broader furnished floor-plan view.","intent":"Inspect the GL floor plan.","app":"Autodesk Revit","details":null},{"start_s":25354.688,"end_s":25368.221,"action":"Panned and zoomed the GL floor plan, then typed shortcuts and activated component placement; the Properties panel showed the Furniture_Crescent_Armchair family ready to place.","intent":"Prepare to place a furniture component.","app":"Autodesk Revit","details":null},{"start_s":25368.221,"end_s":25377.082,"action":"Scrolled through the component type selector while in Place Component mode, reviewing furniture and appliance entries; the list ended showing items such as Grab Rail, Lavadora, beds, and sofas.","intent":"Choose a component family for placement.","app":"Autodesk Revit","details":null},{"start_s":25377.082,"end_s":25386.102,"action":"Returned to the Revit floor plan, scrolled to a closer view, and clicked in the plan to position the active Furniture_Crescent_Armchair component near the furnished rooms.","intent":"Place the selected furniture component in the floor plan.","app":"Autodesk Revit","details":null},{"start_s":25386.102,"end_s":25390.49,"action":"Scrolled briefly, clicked in the Revit workspace, and returned focus to the Autodesk Revit floor plan with a furniture component selected for placement.","intent":"Resume work in the Revit floor plan and prepare a furniture component placement.","app":"Autodesk Revit","details":"Revit showed PROJECT 11, Floor Plan: GL, with the furniture placement tool active."},{"start_s":25390.49,"end_s":25399.618,"action":"Activated the Revit window, clicked in the floor plan to position the selected LR1697_SOFA_04 furniture, and scrolled while keeping placement mode active.","intent":"Position the selected sofa component in the floor plan.","app":"Autodesk Revit","details":"The sofa preview moved beside the bed room area; placement mode remained active."},{"start_s":25399.618,"end_s":25410.272,"action":"Scrolled out to review a wider portion of the floor plan, then pressed Escape repeatedly to exit the active placement or editing state.","intent":"Review the overall layout and cancel the current placement operation.","app":"Autodesk Revit","details":"The view changed from a close-up bedroom area to a broad building plan."},{"start_s":25410.272,"end_s":25418.658,"action":"Scrolled and entered brief text input while navigating the plan, then clicked near the right side of the view; the view shifted to the master bedroom, dressing room, and master toilet area.","intent":"Navigate and inspect another portion of the floor plan.","app":"Autodesk Revit","details":"The visible plan centered on M.BED ROOM, DRESS, and M.TOILET."},{"start_s":25418.658,"end_s":25431.213,"action":"Scrolled through the floor plan and used middle-button navigation to pan across the building, moving from the master-bedroom area to broader central and lower plan regions.","intent":"Survey other areas of the building layout.","app":"Autodesk Revit","details":"The plan was shown at a wider scale with multiple apartment units and central circulation areas visible."},{"start_s":25431.213,"end_s":25442.926,"action":"Used middle-button panning and scrolling to move across the floor plan, then pressed Tab repeatedly while navigating to a view showing the lobby, drawing room, bedrooms, dining area, and electrical room.","intent":"Continue reviewing and navigating the floor plan.","app":"Autodesk Revit","details":"No confirmed element edit was visible; the final view centered on the lobby and adjacent rooms."},{"start_s":25442.926,"end_s":25453.058,"action":"Switched to the Revit 3D view and adjusted the view, bringing the furnished building model into view.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":null},{"start_s":25453.058,"end_s":25459.696,"action":"Navigated within the 3D view to zoom and pan toward a furnished group of rooms, including bedrooms, bathrooms, and a dining area.","intent":"Examine interior model details.","app":"Autodesk Revit","details":null},{"start_s":25459.696,"end_s":25467.6,"action":"Continued navigating the 3D view and adjusted the camera to show a broader portion of the furnished floor layout.","intent":"Review the model arrangement.","app":"Autodesk Revit","details":null},{"start_s":25467.6,"end_s":25478.161,"action":"Zoomed and panned across the 3D model, moving between room groups and briefly selecting visible floor elements highlighted in blue.","intent":"Inspect floor and room elements in the model.","app":"Autodesk Revit","details":null},{"start_s":25478.161,"end_s":25489.387,"action":"Adjusted the 3D camera to zoom out and reposition the model, revealing a wider overview of the furnished floor layout.","intent":"Review the overall building layout.","app":"Autodesk Revit","details":null},{"start_s":25489.387,"end_s":25499.698,"action":"Switched from the 3D view to the GL floor plan, then zoomed and panned across the plan to review labeled rooms and the broader layout.","intent":"Inspect the GL floor plan and room arrangement.","app":"Autodesk Revit","details":null},{"start_s":25499.698,"end_s":25509.771,"action":"Navigated and zoomed within the GL floor plan, ending on a close-up near the Good's Lift and adjacent furniture; changed the active selection from a furniture item to a wall endpoint.","intent":"Inspect or adjust elements in the floor plan.","app":"Autodesk Revit","details":"GL floor plan remained open; the view became highly zoomed."},{"start_s":25509.771,"end_s":25527.032,"action":"Exited the prior selection state, selected the existing furniture assembly, and entered Place Component mode with a new furniture type loaded while returning to a broader floor-plan view.","intent":"Prepare to place a furniture component in the floor plan.","app":"Autodesk Revit","details":"The active type shown at the end was LRI1697_SOFA_04."},{"start_s":25527.032,"end_s":25545.004,"action":"Scrolled and repositioned the floor plan while remaining in Place Component mode, changed the loaded type to Basic_workdek_7034, and moved the placement preview over the close-up furniture area.","intent":"Position a furniture component for potential placement.","app":"Autodesk Revit","details":"A placement preview was visible over the wood-finished furniture; no completed placement is clearly shown."},{"start_s":25545.004,"end_s":25555.951,"action":"Scrolled slightly, changed the loaded component to Furniture_Chair_Office, and moved its placement preview onto the desk area before cancelling placement with Escape.","intent":"Select and preview an office chair component without committing it.","app":"Autodesk Revit","details":"The chair preview appeared over the desk; placement mode remained visible before cancellation."},{"start_s":25555.951,"end_s":25575.769,"action":"Exited placement mode, navigated to the drawing room and nearby bedroom/kitchen area, selected furniture in the drawing room, then re-entered Place Component mode with Furniture_Chair_Office active.","intent":"Inspect furniture and resume component placement in another area of the plan.","app":"Autodesk Revit","details":"The view ended centered on the bedroom and kitchen, with the chair type active."},{"start_s":25575.769,"end_s":25595.602,"action":"Scrolled extensively through the floor plan while keeping Place Component mode active, opened the component type selector, and browsed available furniture and plumbing fixture types, including sink and shower entries.","intent":"Browse component types for a possible placement.","app":"Autodesk Revit","details":"The type list remained open at the end, showing Plumbing_Fixtures_Sink_Cloakroom and other recent types."},{"start_s":25595.602,"end_s":25605.57,"action":"Activated a plumbing sink component in the Revit floor plan, edited its elevation and offset fields to 4.000 feet, and continued positioning the component in the kitchen area.","intent":"Adjust the selected plumbing fixture’s placement parameters.","app":"Autodesk Revit","details":"Floor Plan: GL; selected Plumbing_Fixtures_Sink_Cloak component."},{"start_s":25605.57,"end_s":25615.567,"action":"Exited component placement, zoomed and panned around the floor plan, then selected the kitchen region and nearby elements.","intent":"Review the adjusted fixture and inspect the surrounding floor-plan layout.","app":"Autodesk Revit","details":"Kitchen, M.Bed Room, toilet, and utility areas remained visible."},{"start_s":25615.567,"end_s":25635.013,"action":"Zoomed into the toilet and utility area, entered Place Wall mode, positioned a wall endpoint near the toilet boundary, then returned to component placement and selected the bedroom area.","intent":"Modify or inspect wall geometry around the toilet and adjacent rooms.","app":"Autodesk Revit","details":"A temporary wall-placement preview was visible before returning to component placement."},{"start_s":25635.013,"end_s":25653.592,"action":"Opened the component type selector, browsed available plumbing and fixture families, and zoomed into the toilet and utility area while keeping placement mode active.","intent":"Choose or review a plumbing fixture family for placement.","app":"Autodesk Revit","details":"The type list showed fixture families including a shower head, sink, wardrobe, and WC."},{"start_s":25653.592,"end_s":25661.676,"action":"Dismissed the warning and exited the floor-plan placement workflow, switching to the Revit 3D view.","intent":"Review the model in three dimensions after the floor-plan edits.","app":"Autodesk Revit","details":"Warning stated that created elements were not visible in Floor Plan: GL View; 3D View: {3D} opened."},{"start_s":25661.676,"end_s":25672.2,"action":"Navigated the 3D model with multiple zoom and middle-button view adjustments, changing from a closer angled view to a more zoomed-out overview of the building layout.","intent":"Inspect the overall model and edited area in 3D.","app":"Autodesk Revit","details":"The 3D view displayed multiple furnished rooms and walls."},{"start_s":25672.2,"end_s":25682.48,"action":"Entered a 4-foot value, dismissed transient prompts, and navigated the Revit 3D view with middle-mouse clicks, leaving the model repositioned around the bathroom and adjacent rooms.","intent":"Adjust the 3D model view and enter a dimension value.","app":"Autodesk Revit","details":"A plumbing fixture was selected initially; the final view shows an unselected 3D view."},{"start_s":25682.48,"end_s":25694.108,"action":"Switched from the 3D view to the GL floor plan, scrolled to the furnished bedroom, toilet, kitchen, and utility area, and entered a cm unit value in the active interface.","intent":"Inspect and adjust the GL floor plan view.","app":"Autodesk Revit","details":"The floor plan became visible after the view transition and scrolling."},{"start_s":25694.108,"end_s":25713.865,"action":"Reactivated the GL floor plan, entered a 4-foot value, and activated Place Component for a chrome porcelain sink fixture; zoomed to the master toilet and utility area while positioning the fixture preview.","intent":"Place a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"The sink component remained in placement mode and was not visibly committed."},{"start_s":25713.865,"end_s":25725.115,"action":"Scrolled and zoomed into the master toilet, selected the disabled toilet arrangement component, and navigated the placement view around the toilet and utility area before pressing Escape.","intent":"Inspect or position a disabled toilet arrangement component.","app":"Autodesk Revit","details":"The selected component was labeled WC_-Disabled; no completed placement is visible."},{"start_s":25725.115,"end_s":25735.637,"action":"Pressed Escape repeatedly to exit transient placement states, zoomed and panned across the GL floor plan, then navigated to a wider view showing the complete apartment layout.","intent":"Exit component placement and review the floor plan.","app":"Autodesk Revit","details":"The final view shows the 3BHK plan with bedrooms, toilets, drawing and dining areas, kitchen, and circulation."},{"start_s":25735.637,"end_s":25750.354,"action":"Panned and zoomed from the wider apartment plan into the upper bedrooms and toilets, used Tab navigation and entered cm, then selected the disabled toilet arrangement component while remaining in Place Component mode.","intent":"Inspect and position a toilet fixture arrangement in the upper bathroom area.","app":"Autodesk Revit","details":"The final close-up shows Toilet-1 and Toilet-2; a geometry-collision warning is visible."},{"start_s":25750.354,"end_s":25759.814,"action":"Scrolled through the Revit component type list while viewing the GL floor plan; left the placement interface open with the list repositioned.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The plan remained centered on the toilet areas while the component list changed."},{"start_s":25759.814,"end_s":25779.309,"action":"Scrolled further through the component list and clicked within the list near its lower entries.","intent":"Continue browsing and select a component type.","app":"Autodesk Revit","details":"The visible list moved through items including Support_Metal_Circular, Wardrobe-Family, and WC - Disabled."},{"start_s":25779.309,"end_s":25790.582,"action":"Activated the Revit window, selected the student desk component, and entered placement mode; clicked in the bedroom plan and briefly typed escape and component-search characters.","intent":"Place or adjust a furniture component in the floor plan.","app":"Autodesk Revit","details":"The desk was selected and shown in Bed Room-1 near the upper wall."},{"start_s":25790.582,"end_s":25797.928,"action":"Scrolled the component list and clicked to return focus to the Revit placement interface.","intent":"Browse component types while preparing another placement.","app":"Autodesk Revit","details":"The student desk remained the active furniture type."},{"start_s":25797.928,"end_s":25809.479,"action":"Selected Furniture_Chair_Office, clicked in the bedroom plan, exited placement with escape, and resized the Revit window, leaving the floor plan zoomed out.","intent":"Place an office chair component and review its position in the plan.","app":"Autodesk Revit","details":"The chair was visible near the upper-right area of Bed Room-1; the final view showed much more of the apartment layout."},{"start_s":25809.479,"end_s":25816.381,"action":"Scrolled through the component list over the zoomed-out apartment plan and clicked within the list, changing the visible entries to additional furniture and support types.","intent":"Browse further component types for possible placement.","app":"Autodesk Revit","details":"The list ended around Silla, Sink, suite elevator closet, Support_Metal_Circular, Termination_Wood_Rectangular, and Wardrobe-Family."},{"start_s":25816.381,"end_s":25827.942,"action":"Repositioned the Autodesk Revit window, entered placement mode, and clicked to place the selected suite elevator closet component near the bedroom wall.","intent":"Place a suite elevator closet component in the floor plan.","app":"Autodesk Revit","details":"The component preview changed position and was placed along the lower wall of BED ROOM-1."},{"start_s":25827.942,"end_s":25838.56,"action":"Pressed Escape repeatedly to exit component placement, switched from the GL floor plan to the {3D} view, and waited while the view loaded.","intent":"Exit placement mode and inspect the model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}; the 3D canvas was initially blank while loading."},{"start_s":25838.56,"end_s":25848.949,"action":"Navigated the 3D view with middle-button clicks and scroll gestures, zooming from a distant model view toward the building layout.","intent":"Adjust the 3D view for model inspection.","app":"Autodesk Revit","details":"The model changed from a tiny distant footprint to a larger top-oriented view of the furnished floor layout."},{"start_s":25848.949,"end_s":25858.7,"action":"Continued middle-button navigation and scrolling to zoom and pan across the 3D building model, then zoomed back out to show more of the overall layout.","intent":"Inspect different portions and the overall arrangement of the 3D model.","app":"Autodesk Revit","details":"The view alternated between closer room-level views and a wider multi-unit layout."},{"start_s":25858.7,"end_s":25865.886,"action":"Used middle-button navigation to adjust the model view and rotated it from a top-oriented layout into an angled 3D perspective.","intent":"Change the camera angle for a three-dimensional inspection.","app":"Autodesk Revit","details":"The final view showed the building as an oblique perspective with walls, rooms, and furnishings visible."},{"start_s":25865.886,"end_s":25875.501,"action":"Scrolled and middle-button navigated through the angled 3D model, zooming toward interior rooms and then pulling back to a broader perspective.","intent":"Inspect interior spaces and surrounding building geometry in 3D.","app":"Autodesk Revit","details":"The view briefly focused on a room and highlighted wall area before ending on a wider angled model view."},{"start_s":25875.501,"end_s":25885.832,"action":"Navigated the Revit 3D view by scrolling and middle-clicking, changing from an overall building view to a close-up interior view with a suite elevator closet selected.","intent":"Inspect the model in 3D and focus on a specific interior element.","app":"Autodesk Revit","details":"The view zoomed into a furnished room area and displayed the selected suite elevator closet."},{"start_s":25885.832,"end_s":25896.13,"action":"Switched to the GL floor plan, cycled focus with Tab, and scrolled around the bedroom, toilets, drawing, and dining areas while keeping the suite elevator closet selected.","intent":"Inspect the selected furniture element and its location in the floor plan.","app":"Autodesk Revit","details":"The GL plan showed labeled rooms and the Properties panel identified the selected element as furniture named suite elevator closet."},{"start_s":25896.13,"end_s":25906.75,"action":"Pressed Tab repeatedly to cycle through nearby floor-plan elements, used Escape to clear or exit selection states, and clicked an element near the bedroom and shaft area.","intent":"Review and select elements in the focused floor-plan region.","app":"Autodesk Revit","details":"The view remained zoomed into the staircase, shaft, bedroom, and adjacent corridor region."},{"start_s":25906.75,"end_s":25916.562,"action":"Clicked and manipulated the focused floor-plan geometry, switching into modify and dimension-related interaction modes and placing or adjusting a diagonal measurement between the shaft and bedroom-side geometry.","intent":"Measure or adjust relationships between model lines in the floor plan.","app":"Autodesk Revit","details":"Temporary blue selection and dimension graphics appeared across the corridor area, including a visible 7'-0 1/3\" measurement."},{"start_s":25916.562,"end_s":25926.452,"action":"Pressed Escape to leave the measurement or selection state, clicked near the bedroom-side geometry, and briefly cycled focus with Tab while the plan remained zoomed in.","intent":"Exit the temporary edit state and inspect the nearby floor-plan element.","app":"Autodesk Revit","details":"The temporary dimension graphics disappeared, leaving the staircase shaft, PH-E shaft, corridor, and bedroom visible."},{"start_s":25926.452,"end_s":25936.612,"action":"Scrolled and middle-clicked to zoom out and pan across the GL floor plan, ending with a broader view of the lobby, elevators, bedrooms, dining, kitchen, and utility areas.","intent":"Review the overall floor-plan layout after inspecting the local geometry.","app":"Autodesk Revit","details":"The final view showed a wide portion of the 3BHK 1723 Sqft plan with multiple rooms and circulation areas."},{"start_s":25936.612,"end_s":25947.249,"action":"Clicked within the Revit floor plan and entered “cm”; Revit briefly hid and restored its window, then activated Place Component mode with a suite elevator closet family selected.","intent":"Prepare a component for placement in the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible; the selected family was “suite elevator closet.”"},{"start_s":25947.249,"end_s":25953.7,"action":"Scrolled through the Place Component family list and clicked the search field, leaving the family browser open with available furniture and appliance types visible.","intent":"Browse or search for a component family to place.","app":"Autodesk Revit","details":"The family list showed items including Basic_workdek_7034, Cama, sofas, tables, and Cook_Top."},{"start_s":25953.7,"end_s":25966.045,"action":"Scrolled the family list, selected Basic_workdek_7034, and clicked in the bedroom area of the floor plan; after pressing Escape, left the component in placement mode with its preview positioned over Bedroom 2.","intent":"Position a work desk component in Bedroom 2.","app":"Autodesk Revit","details":"The view zoomed into Bedroom 2 and the status bar indicated that a free instance could be placed."},{"start_s":25966.045,"end_s":25980.519,"action":"Selected Furniture_Chair_Office, clicked near the chair area in Bedroom 2, then navigated back to a wider floor-plan view while cancelling intermediate commands with Escape.","intent":"Choose and position an office chair component in the bedroom.","app":"Autodesk Revit","details":"The selected family was “Furniture_Chair_Office” with dimensions 650x470x410 mm."},{"start_s":25980.519,"end_s":25988.042,"action":"Scrolled the component family list and clicked the search/list area, leaving the browser open with additional seating, refrigerator, parking, and other families visible.","intent":"Browse for another component family.","app":"Autodesk Revit","details":"Visible entries included LR1996_SILLON_ESEDRA, LR2075_RACK_DE_TV_MONTANA, LR2070 refrigerator, and LR2198_SILLON_ELEVEN."},{"start_s":25988.042,"end_s":25997.86,"action":"Returned to the floor plan, scrolled to zoom into Bedroom 2, typed spaces, and clicked near the lower-right bedroom area while remaining in Place Component mode.","intent":"Continue positioning a component in Bedroom 2.","app":"Autodesk Revit","details":"The view ended zoomed into Bedroom 2 with the component placement crosshair/preview visible near the lower-right side."},{"start_s":25997.86,"end_s":26008.469,"action":"Exited component placement and switched from the GL floor plan to the 3D view, then navigated the model with scroll input.","intent":"Inspect the project model in 3D.","app":"Autodesk Revit","details":"The 3D view opened and displayed the building model."},{"start_s":26008.469,"end_s":26017.815,"action":"Middle-clicked and scrolled to orbit and adjust the 3D view, changing the model from an angled perspective to a more top-down orientation.","intent":"Review the building layout from different 3D angles.","app":"Autodesk Revit","details":null},{"start_s":26017.815,"end_s":26027.878,"action":"Returned to the GL floor plan, scrolled to adjust the view, and navigated across the plan to show a wider apartment layout.","intent":"Inspect the floor plan and its room arrangement.","app":"Autodesk Revit","details":"The plan view showed bedrooms, bathrooms, drawing and dining areas, and the kitchen."},{"start_s":26027.878,"end_s":26039.686,"action":"Scrolled and repositioned the GL floor plan, then activated Place Wall and zoomed into the bathroom area.","intent":"Prepare to place or edit a wall in the floor plan.","app":"Autodesk Revit","details":"The view ended focused on Toilet-1 and Toilet-2 with the Place Wall tool active."},{"start_s":26039.686,"end_s":26048.096,"action":"Used the active Place Wall tool to click around the bathroom boundaries, placing or previewing curtain-wall segments along Toilet-1 and Toilet-2, then adjusted the view and continued wall placement.","intent":"Add curtain-wall elements around the bathroom spaces.","app":"Autodesk Revit","details":"Curtain Wall / Curtain_Wall-Empty was active; selected wall geometry appeared around the bathroom edges."},{"start_s":26048.096,"end_s":26060.357,"action":"Continued clicking and canceling wall-placement operations around Toilet-2, then switched to Place Component and selected the suite elevator closet family for placement.","intent":"Place a building component in the floor plan.","app":"Autodesk Revit","details":"The final view showed the suite elevator closet component previewed near the left side of the plan."},{"start_s":26060.357,"end_s":26065.629,"action":"Switched to Autodesk Revit, edited the selected plumbing fixture’s elevation offset, and entered 4 feet, updating the fixture properties.","intent":"Set the plumbing fixture elevation offset.","app":"Autodesk Revit","details":"Floor Plan: GL; selected Plumbing_Fixtures_Sink_Cloakroom fixture."},{"start_s":26065.629,"end_s":26084.76,"action":"Kept the fixture placement workflow active and entered spacing keystrokes while positioning the plumbing fixture near the wall between Toilet-1 and Toilet-2.","intent":"Continue positioning the plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"Fixture placement preview and temporary alignment indicators remained visible."},{"start_s":26084.76,"end_s":26095.76,"action":"Clicked to place plumbing fixtures in the restroom plan, first near the Toilet-1 sink area and then near the Toilet-2 sink area.","intent":"Add sink fixtures to the two toilet rooms.","app":"Autodesk Revit","details":"Placement mode remained active; fixture previews appeared at both sink locations."},{"start_s":26095.76,"end_s":26105.776,"action":"Cancelled the active placement and dimension-edit states with Escape, resized the Revit window, and selected a dimension showing approximately 0.6 feet between the restroom fixtures.","intent":"Exit placement mode and inspect the fixture spacing.","app":"Autodesk Revit","details":"A temporary 0.6-foot dimension was visible before returning to the floor-plan view."},{"start_s":26105.776,"end_s":26115.958,"action":"Navigated the active dimension controls with Tab, clicked the fixture area, and returned to selecting the plumbing fixture; typed a unit entry while the dimension/selection controls were active.","intent":"Adjust or inspect the dimension and fixture placement.","app":"Autodesk Revit","details":"The 0.6-foot dimension and sink fixture remained visible; the selected fixture tooltip identified Plumbing_Fixtures_Sink_Cloakroom."},{"start_s":26115.958,"end_s":26120.534,"action":"Continued the plumbing fixture placement workflow, entered a space keystroke, and clicked near the Toilet-2 sink area to position or confirm another fixture.","intent":"Continue placing the sink fixture in Toilet-2.","app":"Autodesk Revit","details":"Floor Plan: GL remained in placement mode with fixtures visible in both toilet rooms."},{"start_s":26120.534,"end_s":26138.154,"action":"Switched to Autodesk Revit and displayed the GL floor plan with the Place Component tool active and a plumbing sink fixture selected.","intent":"Prepare to place a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"The plan view shows Toilet-1 and Toilet-2; no placement is visibly completed."},{"start_s":26138.154,"end_s":26142.757,"action":"Scrolled through the open component type list while keeping the Revit floor plan visible, browsing available families and recently used types.","intent":"Search for a suitable component family to place.","app":"Autodesk Revit","details":"The list includes Plumbing_Fixtures_Shower_Head and Plumbing_Fixtures_Sink_Cloakroom."},{"start_s":26142.757,"end_s":26152.164,"action":"Selected Plumbing_Fixtures_Shower_Head from the component list, entered 4' and confirmed it, then zoomed the floor plan toward the two toilet rooms.","intent":"Choose a shower-head component and position the view for placement.","app":"Autodesk Revit","details":"The selected type is shown as Metal_Shower_Head; the view is zoomed around Toilet-1 and Toilet-2."},{"start_s":26152.164,"end_s":26159.785,"action":"Dismissed the warning and continued positioning the selected shower-head component over the floor plan, with temporary dimensions visible near the toilet rooms.","intent":"Continue component placement while checking visibility and position.","app":"Autodesk Revit","details":"The warning states that none of the created elements are visible in Floor Plan: GL; no completed placement is clearly shown."},{"start_s":26159.785,"end_s":26167.571,"action":"Pressed Escape repeatedly to exit the active placement operation, scrolled and adjusted the view, then clicked near the component controls; the plan returned to a broader view with the warning still visible.","intent":"Cancel or reset the current placement workflow and inspect the plan.","app":"Autodesk Revit","details":"The broader view shows both toilet rooms and the adjacent bedroom; no new shower-head placement is visibly confirmed."},{"start_s":26167.571,"end_s":26176.913,"action":"Scrolled and selected WC_-Disabled from the component type list, then clicked in the lower area of Toilet-1 to place the disabled-toilet arrangement.","intent":"Place a disabled toilet fixture in Toilet-1.","app":"Autodesk Revit","details":"The final view shows WC_-Disabled active and a toilet symbol visible in the lower part of Toilet-1."},{"start_s":26176.913,"end_s":26185.401,"action":"Resized and repositioned the Revit window, scrolled minimally, and clicked in the Toilet-2 area while the disabled toilet arrangement remained active for placement.","intent":"Position a disabled toilet fixture arrangement in the floor plan.","app":"Autodesk Revit","details":"The placement preview is visible over Toilet-2."},{"start_s":26185.401,"end_s":26196.403,"action":"Pressed Escape several times, tabbed, and clicked near the Toilet-2 fixture, ending the active placement and leaving the arrangement selected in the floor plan.","intent":"Cancel or finalize the fixture placement interaction.","app":"Autodesk Revit","details":"The disabled toilet arrangement is highlighted in cyan after the interaction."},{"start_s":26196.403,"end_s":26206.861,"action":"Scrolled to adjust the floor-plan view, then clicked the view area to switch from Floor Plan: GL to 3D View.","intent":"Inspect the placed toilet arrangement in a 3D context.","app":"Autodesk Revit","details":"The 3D view opens and begins loading."},{"start_s":26206.861,"end_s":26221.528,"action":"Scrolled repeatedly in the 3D view to zoom out from the nearby rooms to a broad overview of the furnished apartment model.","intent":"Review the overall building layout in 3D.","app":"Autodesk Revit","details":"The view changes from a close room view to a distant whole-floor overview."},{"start_s":26221.528,"end_s":26230.438,"action":"Middle-clicked to adjust the 3D view, then clicked the GL view tab to return to the floor plan.","intent":"Return to the floor plan for continued review.","app":"Autodesk Revit","details":"The GL floor plan reappears with the apartment layout and toilet rooms visible."},{"start_s":26230.438,"end_s":26242.402,"action":"Saved the project and repeatedly resized or repositioned the Revit window while keeping the GL floor plan centered on the bedrooms, toilets, and 3BHK label.","intent":"Preserve the project and adjust the workspace view.","app":"Autodesk Revit","details":"The status bar shows the project saving; no clear modeling change is visible."},{"start_s":26242.402,"end_s":26253.964,"action":"Restored and resized the Autodesk Revit window, then left the GL floor plan visible while brief scrolling occurred.","intent":"Return to and inspect the Revit floor plan.","app":"Autodesk Revit","details":"The view showed a detailed residential floor-plan image with bedrooms, toilets, and a dining area."},{"start_s":26253.964,"end_s":26269.121,"action":"Scrolled through the GL floor plan, changing from a close view to a broader view of the building layout.","intent":"Review more of the floor plan.","app":"Autodesk Revit","details":"The raster floor-plan image remained active."},{"start_s":26269.121,"end_s":26277.626,"action":"Scrolled further to zoom out and reveal additional apartment units and the central circulation area.","intent":"Inspect the overall floor-plan arrangement.","app":"Autodesk Revit","details":null},{"start_s":26277.626,"end_s":26289.899,"action":"Continued scrolling to zoom farther out, bringing nearly the entire floor-plan composition into view.","intent":"Review the complete layout at a smaller scale.","app":"Autodesk Revit","details":"Multiple residential clusters and the central lobby/stair area were visible."},{"start_s":26289.899,"end_s":26303.433,"action":"Scrolled farther out until the full plan and its bottom schedule/table were visible within the sheet.","intent":"Inspect the full sheet contents.","app":"Autodesk Revit","details":"The plan appeared as a small centered drawing on a white sheet."},{"start_s":26303.433,"end_s":26314.549,"action":"Paused briefly over the sheet, then scrolled back in to enlarge the floor-plan layout and central area.","intent":"Adjust the view for closer inspection of the plan.","app":"Autodesk Revit","details":"The final view showed a larger portion of the multi-unit floor plan."},{"start_s":26314.549,"end_s":26325.489,"action":"Clicked in the Revit floor plan, navigated the component interface with tabs, and typed “cm”; then switched back to Autodesk Revit and activated component placement.","intent":"Prepare to place a component in the floor plan.","app":"Autodesk Revit","details":"The GL floor plan remained visible, showing the furnished master bedroom and adjacent toilet; component placement mode became active."},{"start_s":26325.489,"end_s":26333.618,"action":"Scrolled through the component type list and opened the searchable list, leaving the search field active with component options displayed.","intent":"Browse available component families for placement.","app":"Autodesk Revit","details":"The list showed families including furniture and plumbing items while the GL floor plan remained visible."},{"start_s":26333.618,"end_s":26348.696,"action":"Selected the Basic_workdek_7034 furniture type from the component list, then returned to the plan with the workdesk selected for placement.","intent":"Choose a workdesk component to place in the floor plan.","app":"Autodesk Revit","details":"The selected workdesk preview and type name appeared in Properties; placement mode remained active."},{"start_s":26348.696,"end_s":26363.978,"action":"Scrolled through the component browser and reviewed additional furniture and plumbing families, including a student desk entry and a preview of the desk type.","intent":"Inspect alternative component types before placement.","app":"Autodesk Revit","details":"The browser displayed entries such as WC, wardrobe, refrigerator, and Escritorio_de_estudiante_de_600x740mm."},{"start_s":26363.978,"end_s":26378.028,"action":"Selected the student desk family, zoomed into the master bedroom, and positioned the desk near the upper wall while remaining in placement mode.","intent":"Place or position a student desk in the bedroom layout.","app":"Autodesk Revit","details":"The plan was zoomed into the M.BED ROOM; the selected desk type was shown in Properties and temporary dimensions appeared during positioning."},{"start_s":26378.028,"end_s":26388.127,"action":"Opened the component list, selected the Furniture_Chair_Office type, and positioned its preview near the desk along the upper wall of the bedroom.","intent":"Choose and position an office chair to accompany the desk.","app":"Autodesk Revit","details":"The final view showed the office chair preview near the desk with temporary placement dimensions."},{"start_s":26388.127,"end_s":26398.813,"action":"Exited transient states, scrolled and middle-clicked the Revit floor plan repeatedly, zooming from a broad layout into the upper-right apartment area.","intent":"Inspect the floor plan at closer scale.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":26398.813,"end_s":26418.813,"action":"Scrolled and middle-clicked to pan across the GL floor plan, moving from the close apartment view to a broader central and lower portion of the layout.","intent":"Review other areas of the floor plan.","app":"Autodesk Revit","details":"No editing result was visible."},{"start_s":26418.813,"end_s":26429.455,"action":"Scrolled to reposition the floor plan, then entered component placement mode and selected a Furniture_Chair_Office type; the view zoomed into a furnished apartment area.","intent":"Prepare to place a furniture component on the plan.","app":"Autodesk Revit","details":"Modify | Place Component was active at the end of the span."},{"start_s":26429.455,"end_s":26445.012,"action":"Scrolled while remaining in Place Component mode, opened the type selector, and browsed the available component list from generic models and grab rails through other furniture and plumbing families.","intent":"Browse for a component type to place.","app":"Autodesk Revit","details":"The type search/list overlay remained open; no placement was confirmed."},{"start_s":26445.012,"end_s":26450.332,"action":"Selected the Wardrobe-Family: Wardrobe - Small type from the component list and returned focus to the floor plan, leaving placement mode active.","intent":"Choose a wardrobe component for placement.","app":"Autodesk Revit","details":"The selected type was shown in the Properties panel."},{"start_s":26450.332,"end_s":26461.635,"action":"Switched to the Wardrobe-Family: Wardrobe - Large type, then scrolled to zoom and reposition the plan around the dress area while the component preview remained active.","intent":"Adjust the selected wardrobe component and its prospective location.","app":"Autodesk Revit","details":"The wardrobe preview was highlighted near the DRESS room; no final placement click was confirmed."},{"start_s":26461.635,"end_s":26472.165,"action":"Scrolled the Revit floor plan, exited the active component-placement state with Escape, and resized the window while returning to the regular plan view.","intent":"Navigate and reset the active placement mode.","app":"Autodesk Revit","details":"The plan remains centered on the dining, drawing, kitchen, and dress areas."},{"start_s":26472.165,"end_s":26481.969,"action":"Clicked and scrolled the floor plan to pan upward and outward, then middle-clicked near the lower-right plan area.","intent":"Navigate the floor plan to inspect a broader area.","app":"Autodesk Revit","details":"The view expanded to show the drawing room, dining area, toilets, kitchen, and adjacent rooms."},{"start_s":26481.969,"end_s":26491.355,"action":"Middle-clicked and scrolled across the plan, panning toward the kitchen and upper rooms before stopping on a broader view.","intent":"Reposition the floor-plan view for inspection.","app":"Autodesk Revit","details":"The view moved from the kitchen and refrigerator area to include the living room and bedrooms."},{"start_s":26491.355,"end_s":26506.292,"action":"Scrolled and panned the plan, entered text 'cm', clicked in the drawing area, and switched back to the Revit window with component placement active.","intent":"Navigate the plan and prepare a component placement operation.","app":"Autodesk Revit","details":"The final view is centered on Bedroom-1 and Living; the Properties panel shows Wardrobe-Family / Wardrobe - Large."},{"start_s":26506.292,"end_s":26512.351,"action":"Scrolled through the active component-placement view and opened the component search/type list by clicking the left panel.","intent":"Browse available component families for placement.","app":"Autodesk Revit","details":"The list shows furniture and appliance types, including office chairs, sofas, refrigerators, and desks."},{"start_s":26512.351,"end_s":26521.893,"action":"Returned focus to Revit with Furniture_Chair_Office selected, resized the window, and clicked in Bedroom-1 to position the chair preview.","intent":"Place an office chair component in the floor plan.","app":"Autodesk Revit","details":"The status bar indicates free-instance placement, and a chair outline appears near the upper-right side of Bedroom-1."},{"start_s":26521.893,"end_s":26530.497,"action":"Pressed Escape several times, switched window visibility, and clicked in the Revit floor plan, leaving the view centered on the bedroom, living room, and toilet area.","intent":"Exit or clear the current placement state and adjust the floor-plan view.","app":"Autodesk Revit","details":"The floor plan changed from a selected component view to an unselected view with the GL level visible."},{"start_s":26530.497,"end_s":26541.925,"action":"Clicked in the floor plan, resized or repositioned the Revit window, and initiated component placement; the Furniture_Chair_Office family appeared in the Properties panel.","intent":"Begin placing or selecting a furniture component in the floor plan.","app":"Autodesk Revit","details":"The plan remained focused on Bedroom-1, Living, and Toilet-1."},{"start_s":26541.925,"end_s":26548.283,"action":"Scrolled through the open component type list to browse available furniture and model families.","intent":"Search the available component families for a suitable item.","app":"Autodesk Revit","details":"The list moved through entries including desks, sofas, TV plasma items, refrigerators, parking bays, and planting families."},{"start_s":26548.283,"end_s":26560.029,"action":"Returned to the floor plan, selected the suite elevator closet component, and clicked in the plan while placement mode remained active.","intent":"Choose a component family and position or preview it in the floor plan.","app":"Autodesk Revit","details":"The Properties panel showed the family name suite elevator closet."},{"start_s":26560.029,"end_s":26574.061,"action":"Pressed Escape repeatedly, browsed the component list, and selected or placed the suite elevator closet; the view zoomed out to show most of the apartment plan with the component highlighted near the living area.","intent":"Cancel or refine component placement and inspect its location in the broader floor plan.","app":"Autodesk Revit","details":"The zoomed-out plan showed the 3BHK layout, including both bedrooms, living, dining, and toilets."},{"start_s":26574.061,"end_s":26579.504,"action":"Scrolled through the component family list while keeping the zoomed-out floor plan visible, browsing tree, plumbing, sofa, TV rack, refrigerator, and related families.","intent":"Continue searching the component library for another family.","app":"Autodesk Revit","details":"The list displayed items such as tree species, Metal_Shower_Head, LR1996_SILLON_ESEDRA, TV rack, refrigerator, and sofa families."},{"start_s":26579.504,"end_s":26598.205,"action":"Reactivated Autodesk Revit, resized and navigated the Floor Plan: GL view with scrolling, then switched focus back to the plan.","intent":"Inspect the floor plan and adjust the active Revit view.","app":"Autodesk Revit","details":"The view remained in Modify | Place Component mode with a furniture component selected."},{"start_s":26598.205,"end_s":26616.438,"action":"Scrolled through the Revit plan while the component placement/type interface was open, then clicked within the type list and left the list visible.","intent":"Browse available component families and types.","app":"Autodesk Revit","details":"The visible list included furniture and other recently used types."},{"start_s":26616.438,"end_s":26633.59,"action":"Selected the Furniture_TV_Plasma 50-inch type, entered a 5-foot value, scrolled the plan, and clicked in the living-room area before cancelling the active placement prompts.","intent":"Configure and position a television component in the floor plan.","app":"Autodesk Revit","details":"The selected type was shown in the Properties panel as Furniture_TV_Plasma 50\"."},{"start_s":26633.59,"end_s":26644.382,"action":"Browsed the component type list and selected Basic_workdek_7034, then navigated and zoomed the plan around the living-room wall area.","intent":"Choose another furniture component and inspect its placement area.","app":"Autodesk Revit","details":"The type list showed Furniture_Crescent_Armchair, Furniture_Desk, sofa types, and Furniture_TV_Plasma."},{"start_s":26644.382,"end_s":26655.759,"action":"Cancelled the active component operation with Escape, used middle-button navigation to zoom and pan out to the broader floor plan, and tabbed through the interface.","intent":"Exit component placement and review the overall floor plan.","app":"Autodesk Revit","details":"The plan returned to a general view showing the living, dining, bedrooms, lobby, and drawing areas."},{"start_s":26655.759,"end_s":26665.931,"action":"Panned and scrolled downward through the floor plan, tabbed through selections, clicked a furniture element and then the kitchen area, and left the view focused lower on the plan.","intent":"Inspect lower rooms and select visible plan elements.","app":"Autodesk Revit","details":"The final view showed the dining room, kitchen, drawing room, master bedroom, dress, and adjacent toilets."},{"start_s":26665.931,"end_s":26675.539,"action":"Repositioned and resized the Revit window, then clicked within the floor plan while an extrusion remained selected near the kitchen.","intent":"Adjust the Revit workspace and continue working on the selected extrusion.","app":"Autodesk Revit","details":"Floor Plan: GL showed the dining, nook, and kitchen areas."},{"start_s":26675.539,"end_s":26684.61,"action":"Entered Edit Extrusion mode, selected the extrusion boundary, zoomed toward the nook, and clicked near its lower-left area before pressing Escape.","intent":"Inspect and edit the extrusion sketch around the nook.","app":"Autodesk Revit","details":"The extrusion boundary was highlighted in magenta and temporary dimensions were visible."},{"start_s":26684.61,"end_s":26695.2,"action":"Zoomed further into the nook and clicked sketch geometry near the lower and right edges while editing the extrusion.","intent":"Refine or inspect the nook-related extrusion sketch geometry.","app":"Autodesk Revit","details":"The nook outline and adjacent extrusion edges remained highlighted in magenta."},{"start_s":26695.2,"end_s":26714.828,"action":"Canceled active sketch commands repeatedly, clicked and adjusted the nook extrusion sketch, and zoomed or panned back to the broader dining and kitchen area.","intent":"Close or correct the extrusion sketch around the nook.","app":"Autodesk Revit","details":"A horizontal sketch segment and temporary 1.000 dimension appeared; the view ended with the nook extrusion outlined."},{"start_s":26714.828,"end_s":26724.762,"action":"Continued editing the extrusion, dragged and clicked sketch edges, and triggered a Revit error stating that the lines must form closed loops; continued editing afterward.","intent":"Resolve an open-loop error in the extrusion boundary.","app":"Autodesk Revit","details":"The error dialog reported that highlighted lines were open on one end, with Continue and Quit sketching options."},{"start_s":26724.762,"end_s":26734.959,"action":"Clicked to leave or confirm the extrusion edit, resized the Revit window, navigated the view, and ended with the dining furniture selected in the broader floor plan.","intent":"Exit the extrusion editing state and review the overall floor plan.","app":"Autodesk Revit","details":"The final view showed the full dining, drawing, kitchen, bedrooms, and bathrooms; the dining table and chairs were highlighted."},{"start_s":26734.959,"end_s":26744.774,"action":"Scrolled and clicked within the GL floor plan, typed “wa,” then entered wall-placement mode and clicked near the utility/toilet area.","intent":"Begin placing a wall in the floor plan.","app":"Autodesk Revit","details":"The view remained focused on the master bedroom, dress, M. toilet, and utility rooms."},{"start_s":26744.774,"end_s":26754.532,"action":"Exited the active wall command, zoomed out and back into the floor plan, then clicked and dragged around Toilet-2 before cancelling.","intent":"Inspect and adjust the floor-plan wall placement area.","app":"Autodesk Revit","details":"Toilet-2 and the adjacent dining/nook area became the focus."},{"start_s":26754.532,"end_s":26763.038,"action":"Scrolled across the plan, clicked around Toilet-1, and cancelled the active wall command.","intent":"Inspect wall placement locations around Toilet-1.","app":"Autodesk Revit","details":"The view moved from the overall 3BHK plan to a close-up of Toilet-1."},{"start_s":26763.038,"end_s":26775.542,"action":"Reviewed the floor plan, clicked in the drawing, typed “cm,” and switched into component-placement mode with a Basic_workdesk_7034 family selected.","intent":"Prepare to place a furniture component in the floor plan.","app":"Autodesk Revit","details":"The final view focused on the master bedroom and M. toilet area."},{"start_s":26775.542,"end_s":26783.587,"action":"Scrolled through the component list and opened the family selection browser, reviewing available furniture and plumbing fixture families.","intent":"Choose a component family for placement.","app":"Autodesk Revit","details":"The browser showed entries including sofas, a refrigerator, shower head, and sink cloakroom families."},{"start_s":26783.587,"end_s":26792.046,"action":"Selected the Plumbing_Fixtures_Sink_Cloakroom family, entered an elevation value of 4 feet, and placed the sink fixture in the M. toilet area.","intent":"Place and configure a sink fixture in the master toilet.","app":"Autodesk Revit","details":"The sink was positioned near the lower-left side of M. toilet and remained selected for further placement."},{"start_s":26792.046,"end_s":26801.993,"action":"Scrolled the Revit floor plan view while remaining in Place Component mode.","intent":"Navigate the floor plan to inspect another area.","app":"Autodesk Revit","details":null},{"start_s":26801.993,"end_s":26806.456,"action":"Scrolled farther out to reveal a broader portion of the floor plan, including multiple apartment layouts.","intent":"Get an overview of the surrounding floor plan.","app":"Autodesk Revit","details":null},{"start_s":26806.456,"end_s":26826.456,"action":"Reviewed the zoomed-out floor plan and made additional scrolling adjustments, leaving several apartment units visible.","intent":"Inspect the overall arrangement before focusing on a fixture location.","app":"Autodesk Revit","details":null},{"start_s":26826.456,"end_s":26832.737,"action":"Zoomed into the Toilet-2 area and clicked near the bathroom sink, bringing the plumbing fixture region into close view.","intent":"Focus on the sink location for component placement or inspection.","app":"Autodesk Revit","details":null},{"start_s":26832.737,"end_s":26849.43,"action":"Scrolled around the close-up bathroom view and then repositioned to show the selected sink fixture within Toilet-2 and the adjacent kitchen.","intent":"Inspect the selected plumbing fixture and its placement context.","app":"Autodesk Revit","details":null},{"start_s":26849.43,"end_s":26862.349,"action":"Scrolled to Toilet-1, clicked the sink area, then pressed Escape and returned to a wider floor-plan view.","intent":"Inspect another sink location and exit the current placement or selection operation.","app":"Autodesk Revit","details":null},{"start_s":26862.349,"end_s":26875.059,"action":"Typed into the active Revit placement interface, clicked near the lower canvas, and scrolled the floor plan while a sink component remained selected for placement.","intent":"Position or configure a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"The view showed the GL floor plan with a Plumbing_Fixtures_Sink component selected and placement mode active."},{"start_s":26875.059,"end_s":26884.515,"action":"Scrolled repeatedly to zoom out and reposition the GL floor plan, leaving the selected plumbing component and a temporary dimension visible.","intent":"Adjust the plan view to locate the intended placement area.","app":"Autodesk Revit","details":"The view changed from a close-up to a broader multi-unit floor plan."},{"start_s":26884.515,"end_s":26898.491,"action":"Scrolled and pressed Escape several times, typed a unit suffix, and clicked the canvas; Revit returned to an active floor-plan view at a closer zoom.","intent":"Exit or refine the current component-placement operation and continue working in the plan.","app":"Autodesk Revit","details":"The final view focused on the upper-right apartment area, including the living room, bedrooms, dining area, and Toilet-1."},{"start_s":26898.491,"end_s":26910.473,"action":"Scrolled and clicked through the plan, switched Revit windows, and left a disabled toilet fixture selected in placement mode while zooming into Toilet-1 and then back to the surrounding rooms.","intent":"Select or position a disabled toilet arrangement in the bathroom area.","app":"Autodesk Revit","details":"The Properties panel identified the selected family as WC_-Disabled, Disabled Toilet Arrangement."},{"start_s":26910.473,"end_s":26921.048,"action":"Scrolled to Toilet-1, selected a shower-head plumbing fixture, edited its elevation field to 4' and confirmed it, then continued navigating the view until a warning window appeared.","intent":"Set the shower-head elevation and continue fixture placement.","app":"Autodesk Revit","details":"The selected family was Plumbing_Fixtures_Shower_H..., Metal_Shower_Head; the elevation field initially showed 0.000 and was edited to 4'."},{"start_s":26921.048,"end_s":26935.564,"action":"Returned to Revit, scrolled across the plan, pressed Escape to leave the active operation, resized or moved the window, and clicked to bring up a warning about created elements not being visible in Floor Plan: GL View.","intent":"Review the resulting fixture visibility and warning in the floor plan.","app":"Autodesk Revit","details":"The final view focused on Toilet-2, and the warning advised checking the active view, visibility settings, or Plan Regions."},{"start_s":26935.564,"end_s":26949.252,"action":"Switched to Revit, navigated the GL floor plan with scrolling and window resizing, and activated component placement. Selected a plumbing fixture type and left the plan ready to place it.","intent":"Prepare a plumbing fixture for placement in the floor plan.","app":"Autodesk Revit","details":"GL floor plan; warning indicated some created elements were not visible."},{"start_s":26949.252,"end_s":26960.1,"action":"Scrolled and edited the active plumbing fixture placement workflow, entering a value and confirming it. Selected the Sink_Cloakroom fixture while viewing the GL plan around Toilet-2.","intent":"Configure the plumbing fixture before placing it.","app":"Autodesk Revit","details":"Sink_Cloakroom type is shown in the Properties panel."},{"start_s":26960.1,"end_s":26977.685,"action":"Navigated and zoomed around Toilet-2, then positioned the sink fixture in the plan. Left the sink preview active near the lower wall of the toilet room.","intent":"Position a sink fixture in Toilet-2.","app":"Autodesk Revit","details":"Active placement preview and temporary dimension are visible."},{"start_s":26977.685,"end_s":26985.587,"action":"Scrolled slightly and changed the active fixture type to WC_-Disabled. Positioned the toilet fixture preview inside Toilet-2 and left placement mode active.","intent":"Prepare and position a disabled toilet arrangement in Toilet-2.","app":"Autodesk Revit","details":"WC_-Disabled is shown in the Properties panel."},{"start_s":26985.587,"end_s":26994.493,"action":"Canceled the active placement with Escape and navigated the floor plan by scrolling and tabbing. Returned to a broader view showing the upper rooms and Toilet-1.","intent":"Exit the current placement operation and review another area of the plan.","app":"Autodesk Revit","details":"No confirmed placement action is visible during this span."},{"start_s":26994.493,"end_s":27012.07,"action":"Panned and zoomed to the dressing and M.Toilet area, then activated WC_-Disabled placement and positioned the toilet preview inside M.Toilet.","intent":"Place or position a disabled toilet arrangement in M.Toilet.","app":"Autodesk Revit","details":"WC_-Disabled remains active in placement mode; the preview appears near the bottom of M.Toilet."},{"start_s":27012.07,"end_s":27023.563,"action":"Switched to Autodesk Revit, navigated the GL floor plan, and worked in Place Component mode near the bathroom walls. Selected or positioned a plumbing fixture, then triggered a warning dialog.","intent":"Place a plumbing fixture in the GL floor plan.","app":"Autodesk Revit","details":"The plan shows the M.TOILET area and a Plumbing_Fixtures_Shower_H... family; Revit ended on a Warning window."},{"start_s":27023.563,"end_s":27036.464,"action":"Pressed Escape repeatedly to leave the placement operation, clicked the view area, and switched from the GL floor plan to the 3D view. Scrolled while the 3D view loaded; a warning stated that none of the created elements were visible in the floor plan.","intent":"Exit component placement and inspect the model in 3D.","app":"Autodesk Revit","details":"The 3D view remained mostly blank while loading, with the warning visible at lower right."},{"start_s":27036.464,"end_s":27051.187,"action":"Scrolled through the Revit 3D view while the model displayed, then saved or invoked a save-related command and waited through window resizing and system changes. The building model remained visible in an angled overview.","intent":"Review the model in 3D and preserve the current project state.","app":"Autodesk Revit","details":"The 3D view showed an angled building layout; no specific model edit was visible."},{"start_s":27051.187,"end_s":27057.869,"action":"Switched away from Revit to the recorder and Windows Explorer and waited while Revit returned to its Home screen. A Windows notification appeared and was selected.","intent":"Switch applications while Revit continues loading.","app":"Windows Explorer / Autodesk Revit","details":"The recorder window was privacy-masked; the visible Revit Home screen showed a loading indicator and a WhatsApp notification."},{"start_s":27057.869,"end_s":27067.684,"action":"Dismissed or interacted with the Windows notification and waited on Autodesk Revit Home while the application continued loading. Revit remained on a dark loading screen.","intent":"Wait for Autodesk Revit to finish loading.","app":"Autodesk Revit","details":"The WhatsApp notification disappeared, but Revit still displayed a loading spinner."},{"start_s":27067.684,"end_s":27084.675,"action":"Returned to the PROJECT 11 3D view and waited as the interface and view panels loaded. Scrolled near the end of the interval, but the central 3D canvas remained blank with a loading spinner.","intent":"Resume viewing the project’s 3D model.","app":"Autodesk Revit","details":"The Project Browser was visible on the right and the (3D) view tab was active; the model had not finished rendering."},{"start_s":27084.675,"end_s":27101.395,"action":"Revealed Autodesk Revit and resized the window, leaving the 3D building view visible; performed brief scroll input without a clear visible change.","intent":"Return to and adjust the Revit model view.","app":"Autodesk Revit","details":"Displayed project 11 in a 3D view."},{"start_s":27101.395,"end_s":27111.102,"action":"Middle-clicked and scrolled repeatedly in the 3D view, zooming and repositioning the building model to a closer overhead view.","intent":"Inspect the building model at different zoom levels.","app":"Autodesk Revit","details":"The 3D view changed from a small distant model to a larger overhead view."},{"start_s":27111.102,"end_s":27121.322,"action":"Middle-clicked and scrolled extensively in the 3D view, navigating from the overall building to a close interior view and then back toward a wider model view.","intent":"Navigate through the 3D model to inspect interior areas.","app":"Autodesk Revit","details":"The close view showed brick walls, windows, doors, and a furnished room."},{"start_s":27121.322,"end_s":27131.566,"action":"Selected the GL floor plan from the Project Browser, switching from the 3D view to Floor Plan: GL, then scrolled to zoom into the furnished plan.","intent":"Open and inspect the GL floor plan.","app":"Autodesk Revit","details":"The floor plan displayed labeled rooms including bedrooms, kitchen, toilets, lobby, and utility areas."},{"start_s":27131.566,"end_s":27139.745,"action":"Pressed Tab repeatedly and scrolled in the GL floor plan, then middle-clicked near the upper-right rooms and lower plan area to navigate the view.","intent":"Navigate and inspect elements in the GL floor plan.","app":"Autodesk Revit","details":"The view remained on the furnished GL plan and showed a highlighted wall near the upper-right rooms."},{"start_s":27139.745,"end_s":27156.179,"action":"Pressed Tab repeatedly, scrolled and middle-clicked in the GL floor plan, typed “cm,” and resized or moved the Revit window; selected an area near Bedroom 2, activating Place Component with a plumbing fixture loaded.","intent":"Prepare to place a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"Revit entered Modify | Place Component mode with Plumbing_Fixtures: Shower_Head Metal_Shower_Head shown in Properties."},{"start_s":27156.179,"end_s":27166.022,"action":"Reviewed the Revit floor plan while the Place Component tool remained active, scrolled through the component list, and clicked in the plan before the window briefly hid and resized.","intent":"Review available component types and prepare placement in the floor plan.","app":"Autodesk Revit","details":"The component browser showed plumbing fixture types and recently used families; no completed placement is clearly visible."},{"start_s":27166.022,"end_s":27178.229,"action":"Selected the bedroom boundary and nearby wall geometry in the GL floor plan, then pressed Escape several times and returned focus to the component interface.","intent":"Inspect or select model geometry while working in the active placement context.","app":"Autodesk Revit","details":"The bedroom perimeter was highlighted in blue and temporary dimensions appeared."},{"start_s":27178.229,"end_s":27188.18,"action":"Scrolled the component browser, selected the Furniture_TV_Plasma 50-inch type, and entered a placement value before confirming.","intent":"Choose a television family and specify its placement or offset.","app":"Autodesk Revit","details":"The selected family changed from Basic_workdesk_7034 to Furniture_TV_Plasma 50-inch; the plan remained on Bedroom-2."},{"start_s":27188.18,"end_s":27200.236,"action":"Kept the Furniture_TV_Plasma type active, entered spacing input, and clicked model geometry to reference wall and furniture edges.","intent":"Position or constrain the selected television family in the floor plan.","app":"Autodesk Revit","details":"Temporary dimensions and endpoint/extension indicators appeared around the bedroom and adjacent living-room geometry."},{"start_s":27200.236,"end_s":27206.021,"action":"Scrolled extensively through the component list and moved from recently used types to furniture families, ending with the Furniture_Chair_Office entry visible and previewed.","intent":"Browse for another furniture component type.","app":"Autodesk Revit","details":"The browser displayed furniture entries including office, viper, crescent-arm, and desk families."},{"start_s":27206.021,"end_s":27216.183,"action":"Selected the Furniture_Chair_Office family, clicked near the bedroom furniture, canceled the active placement with Escape, and switched from the GL floor plan to the 3D view.","intent":"Attempt placement of an office chair and then inspect the model in 3D.","app":"Autodesk Revit","details":"The final title changed to PROJECT 11 - 3D View: {3D}; the 3D viewport was still loading or blank."},{"start_s":27216.183,"end_s":27226.364,"action":"Navigated the Revit 3D view by clicking and scrolling, enlarging and repositioning the building model on screen.","intent":"Inspect the 3D building layout.","app":"Autodesk Revit","details":null},{"start_s":27226.364,"end_s":27238.096,"action":"Switched to the GL floor plan, navigated the plan view, and entered Place Component mode with a furniture chair family selected.","intent":"Prepare to place a furniture component in the GL floor plan.","app":"Autodesk Revit","details":"The selected family is Furniture_Chair_Office."},{"start_s":27238.096,"end_s":27247.715,"action":"Scrolled within the GL floor plan and opened the component type picker, browsing available furniture and fixture families.","intent":"Browse component types for placement.","app":"Autodesk Revit","details":"The picker displayed items including Grab Rail - Vertical, Lavadora, bed, sofa, sink, and suite elevator closet."},{"start_s":27247.715,"end_s":27256.036,"action":"Selected the suite elevator closet family and moved the placement preview over Bedroom-1, leaving the component ready to place.","intent":"Position a selected component in the bedroom plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Component mode."},{"start_s":27256.036,"end_s":27269.8,"action":"Clicked in Bedroom-1 to place or reposition the suite elevator closet preview, then pressed Escape and adjusted the view while remaining in component placement mode.","intent":"Place and refine the component location in Bedroom-1.","app":"Autodesk Revit","details":"The component preview remained visible over the bedroom furniture area."},{"start_s":27269.8,"end_s":27280.393,"action":"Opened and scrolled the component type picker, browsing additional families while the placement command remained active.","intent":"Search for another component type.","app":"Autodesk Revit","details":"The picker showed grab rails, a washing machine, and the LR722_Conjunto_Cama family."},{"start_s":27280.393,"end_s":27290.985,"action":"Placed or adjusted a desk component in the GL floor plan near Bedroom-1, then pressed Escape and interacted with the placement view.","intent":"Position furniture in the floor plan.","app":"Autodesk Revit","details":"The selected component was an Escritorio_de_estudiante desk, shown as 600 x 460 x 740 mm."},{"start_s":27290.985,"end_s":27300.807,"action":"Opened the component type search/list, selected Furniture_Chair_Office, and positioned the chair near the desk in Bedroom-1 before pressing Escape to end placement.","intent":"Add an office chair to the floor plan.","app":"Autodesk Revit","details":"The chair preview appeared beside the desk in the GL floor plan."},{"start_s":27300.807,"end_s":27310.878,"action":"Switched from the GL floor plan to the 3D view and navigated the model with scroll and middle-button view controls until the furnished building was visible.","intent":"Inspect the building model in 3D.","app":"Autodesk Revit","details":"The 3D view loaded from a blank workspace into an isometric building view."},{"start_s":27310.878,"end_s":27321.28,"action":"Used middle-button orbit and scroll gestures to rotate and reposition the 3D view, moving from a broad building view toward a closer inspection of the rooms.","intent":"Examine the 3D model from different angles.","app":"Autodesk Revit","details":"The view changed to a closer isometric perspective of multiple furnished rooms and corridors."},{"start_s":27321.28,"end_s":27330.759,"action":"Continued orbiting and zooming the 3D model, moving across the building toward a closer view of furnished rooms and a highlighted closet area.","intent":"Inspect interior furniture placement in 3D.","app":"Autodesk Revit","details":"The 3D view ended focused on several rooms, with a blue-highlighted suite elevator closet component visible."},{"start_s":27330.759,"end_s":27348.898,"action":"Returned to the GL floor plan, zoomed and navigated across the layout, then selected the drawing-room area and activated a Furniture_Chair_Office component for placement.","intent":"Review the floor plan and prepare another chair placement.","app":"Autodesk Revit","details":"The final view showed the Bedroom-1, living, dining, drawing, kitchen, and adjacent rooms; the chair type was active in Place Component mode."},{"start_s":27348.898,"end_s":27353.398,"action":"Scrolled through the Revit component-type list and clicked within the list, changing the visible preview from a washing machine to a TV rack component.","intent":"Browse available furniture components for placement.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible behind the component browser."},{"start_s":27353.398,"end_s":27362.042,"action":"Returned to the Revit window, resized it, scrolled, and clicked in the floor plan while the TV rack component remained active for placement.","intent":"Prepare and position a selected furniture component in the floor plan.","app":"Autodesk Revit","details":"The selected component was LR2075_RACK_DE_TV_MONTANA; placement mode was active."},{"start_s":27362.042,"end_s":27373.113,"action":"Clicked in the drawing area and scrolled to zoom into the dining and drawing-room area, leaving the TV rack preview selected near the kitchen-side wall.","intent":"Inspect and refine the component placement location.","app":"Autodesk Revit","details":"The TV rack was highlighted in blue with temporary dimensions."},{"start_s":27373.113,"end_s":27382.121,"action":"Scrolled repeatedly to zoom out from the room-level view to a broader floor-plan view.","intent":"Review the component location in the overall plan.","app":"Autodesk Revit","details":"The floor plan became significantly smaller and multiple rooms were visible."},{"start_s":27382.121,"end_s":27394.006,"action":"Typed spaces and scrolled to move the view to the bedroom, toilet, and living-room area, then clicked in the drawing area with placement mode still active.","intent":"Navigate to another area of the plan and continue component placement.","app":"Autodesk Revit","details":"The TV rack preview appeared along the wall beside the living room."},{"start_s":27394.006,"end_s":27403.486,"action":"Scrolled and pressed Escape several times, then clicked and scrolled to adjust the view; the component remained selected before the interface returned to the standard Architecture tools.","intent":"Exit or finalize the active component-placement operation and review the plan.","app":"Autodesk Revit","details":"The final view showed the overall GL floor plan without the placement browser."},{"start_s":27403.486,"end_s":27420.733,"action":"Exited the prior placement state, navigated the Revit floor plan, and initiated placement of a furniture component near the bathroom and dressing area.","intent":"Prepare to place another architectural component in the floor plan.","app":"Autodesk Revit","details":"The view shows the GL floor plan with the Modify | Place Component tool active."},{"start_s":27420.733,"end_s":27434.106,"action":"Selected a plumbing fixture sink type, entered a 4-foot value, and placed the sink in the bathroom beside the existing counter.","intent":"Add and position a bathroom sink fixture.","app":"Autodesk Revit","details":"The selected type is Plumbing_Fixtures_Sink_Cloakroom, and the placed sink is visible at the left side of the bathroom."},{"start_s":27434.106,"end_s":27446.977,"action":"Selected the WC_-Disabled fixture and placed it in the lower portion of the bathroom, then panned the floor plan toward the adjacent dressing area.","intent":"Add the disabled toilet fixture and inspect its placement in context.","app":"Autodesk Revit","details":"The toilet is visible near the bathroom’s lower wall; placement mode remains active."},{"start_s":27446.977,"end_s":27456.392,"action":"Selected the Wardrobe-Family wardrobe and positioned it along the right side of the dressing room, while adjusting the view around the bathroom and closet.","intent":"Add a large wardrobe to the dressing area.","app":"Autodesk Revit","details":"The wardrobe is selected and outlined in the dressing room."},{"start_s":27456.392,"end_s":27464.851,"action":"Switched to the smaller Wardrobe-Family type and placed or adjusted it along the dressing-room wall.","intent":"Add or refine wardrobe furniture in the dressing area.","app":"Autodesk Revit","details":"The Properties panel identifies the selected type as Wardrobe-Family, Wardrobe - Small."},{"start_s":27464.851,"end_s":27473.01,"action":"Selected the large wardrobe again, dragged or repositioned it along the right side of the dressing room, and left the component active for further placement.","intent":"Refine the wardrobe layout and continue furniture placement.","app":"Autodesk Revit","details":"The large wardrobe remains highlighted with temporary placement dimensions visible."},{"start_s":27473.01,"end_s":27480.826,"action":"Clicked twice in the Revit floor plan while the Wardrobe - Large component remained active.","intent":"Position or interact with the active wardrobe component.","app":"Autodesk Revit","details":"Floor Plan: GL showed the M. Toilet and Dress areas."},{"start_s":27480.826,"end_s":27495.075,"action":"Exited the active placement state with Escape, navigated the floor plan by scrolling and clicking, then reactivated component placement and selected a point near the bedroom area.","intent":"Navigate the plan and continue placing or positioning a component.","app":"Autodesk Revit","details":"The view moved from the full apartment plan to the master and adjacent bedroom areas."},{"start_s":27495.075,"end_s":27499.815,"action":"Scrolled through the floor plan and opened the component type list, browsing available families and recently used types.","intent":"Choose a component family for placement.","app":"Autodesk Revit","details":"The type list displayed items including Basic_workdek_7034 and other furniture and planting families."},{"start_s":27499.815,"end_s":27505.139,"action":"Kept the Basic_workdek_7034 component active, adjusted the view with short scrolls, and positioned the placement cursor near the master bedroom wall.","intent":"Prepare the selected workdesk component for placement.","app":"Autodesk Revit","details":"The master bedroom remained visible with placement guides and temporary dimensions."},{"start_s":27505.139,"end_s":27525.139,"action":"Remained idle while viewing the master bedroom portion of the Revit floor plan with the workdesk component still active.","intent":"Review the planned component placement before further interaction.","app":"Autodesk Revit","details":"No interaction events were recorded."},{"start_s":27525.139,"end_s":27538.719,"action":"Resumed activity and scrolled the floor plan to adjust the view around the master bedroom entrance and adjacent furniture.","intent":"Inspect or refine the component placement area.","app":"Autodesk Revit","details":"The view shifted slightly while Basic_workdek_7034 remained active."},{"start_s":27538.719,"end_s":27551.646,"action":"Clicked in the floor plan to position a furniture component, leaving Revit in Place Component mode over the master bedroom desk area.","intent":"Position a furniture component in the floor plan.","app":"Autodesk Revit","details":"Basic_workdesk_7034 was active in the Properties palette."},{"start_s":27551.646,"end_s":27561.399,"action":"Switched back to Revit, resized the window, and continued positioning the Furniture_Chair_Office component beneath the desk in the master bedroom; clicked to place it.","intent":"Place an office chair at the desk.","app":"Autodesk Revit","details":"The chair preview became positioned below the desk and remained in placement mode."},{"start_s":27561.399,"end_s":27574.457,"action":"Canceled the active placement, navigated and zoomed the floor plan, then returned to the bedroom area with the chair component still selected for placement.","intent":"Reposition the view and continue furniture placement.","app":"Autodesk Revit","details":"The view changed from the master bedroom close-up to a broader plan and then to Bed Room-2."},{"start_s":27574.457,"end_s":27587.959,"action":"Scrolled through the Furniture type selector and opened its searchable list, browsing available component types while viewing Bed Room-2.","intent":"Select another furniture component type.","app":"Autodesk Revit","details":"The list showed furniture and plumbing-related types, including sofas, sinks, and closets."},{"start_s":27587.959,"end_s":27598.509,"action":"Selected the suite elevator closet type and continued the active placement operation over the Bed Room-2 area, using spacebar inputs to adjust the preview.","intent":"Prepare the selected component for placement.","app":"Autodesk Revit","details":"The Properties palette identified the active type as suite elevator closet."},{"start_s":27598.509,"end_s":27609.042,"action":"Clicked in the floor plan to place or adjust the suite elevator closet component near the lower edge of Bed Room-2, then clicked the adjacent wall or endpoint.","intent":"Position the selected component relative to the bedroom wall.","app":"Autodesk Revit","details":"The placement preview disappeared and the view showed a dimension near the lower wall."},{"start_s":27609.042,"end_s":27614.101,"action":"Scrolled through the component type list while keeping the Revit floor plan in Place Component mode, then clicked near the lower-left area.","intent":"Browse available component types for placement.","app":"Autodesk Revit","details":"The list moved from elevator and plumbing-related types to furniture and other recently used types."},{"start_s":27614.101,"end_s":27626.577,"action":"Exited the component browser and selected the student desk furniture type, then clicked in the floor plan near Bed Room-2; pressed Escape and entered \"cm\" while adjusting the active placement state.","intent":"Choose a furniture component and position it in the floor plan.","app":"Autodesk Revit","details":"The Properties panel showed Escritorio_de_estudiante_de_600x740mm, and a desk preview/selection appeared near the lower-right of Bed Room-2."},{"start_s":27626.577,"end_s":27634.68,"action":"Selected the Furniture_Chair_Office type and clicked in the floor plan near the lower-right of Bed Room-2 to place or preview the chair.","intent":"Add an office chair component to the room layout.","app":"Autodesk Revit","details":"Revit remained in Place Component mode and displayed a chair preview with temporary dimensions."},{"start_s":27634.68,"end_s":27644.578,"action":"Pressed Escape several times and scrolled the floor plan, zooming out from the bedroom area to reveal most of the apartment layout.","intent":"Cancel or finish the component placement and review its location in the overall plan.","app":"Autodesk Revit","details":"The view changed from a close-up of Bed Room-2 to a broader apartment floor plan."},{"start_s":27644.578,"end_s":27654.064,"action":"Used Tab navigation and middle-mouse clicks while panning or scrolling across the floor plan; selected an element near the drawing area and moved the view toward the right side of the apartment.","intent":"Navigate and inspect elements in the floor plan.","app":"Autodesk Revit","details":"Blue selection outlines appeared around furniture near the drawing room, and the view shifted to include the kitchen, utility, and lift areas."},{"start_s":27654.064,"end_s":27670.561,"action":"Scrolled and navigated through the plan, used Tab to cycle selectable elements, entered \"cm\", pressed Escape, and clicked near the left side of the plan; ended with the Furniture_Chair_Office component active in Place Component mode.","intent":"Inspect and adjust component placement around the toilet and dressing area.","app":"Autodesk Revit","details":"The final view focused on M.Toilet, Dress, Bed Room-1, and the dining area; the chair component remained active with temporary dimensions visible."},{"start_s":27670.561,"end_s":27676.218,"action":"Scrolled through the Revit component/type list while the GL floor plan remained visible, then switched into the Autodesk Revit project window.","intent":"Review available component types before continuing placement work.","app":"Autodesk Revit","details":"Component placement mode was active; the list showed furniture and plumbing fixture types."},{"start_s":27676.218,"end_s":27687.62,"action":"Selected the Plumbing_Fixtures_Shower_Head type, entered a 4-foot value, and navigated to the M. TOILET area of the GL floor plan before clicking near the left wall.","intent":"Position a shower-head component in the floor plan.","app":"Autodesk Revit","details":"The selected type was Metal_Shower_Head, with elevation shown as 4.000 feet."},{"start_s":27687.62,"end_s":27696.075,"action":"Encountered a Revit warning about created elements not being visible in the GL floor plan, dismissed the warning and placement state with Escape, and switched to the 3D view.","intent":"Handle the visibility warning and inspect the model in 3D.","app":"Autodesk Revit","details":"The warning advised checking the active view, visibility settings, and plan region."},{"start_s":27696.075,"end_s":27705.023,"action":"Navigated the 3D view with middle-mouse orbit/pan and scroll gestures, changing the camera from a broad angled building view toward a more distant partial view.","intent":"Inspect the building model from different 3D viewpoints.","app":"Autodesk Revit","details":null},{"start_s":27705.023,"end_s":27715.579,"action":"Continued orbiting, panning, and zooming the Revit 3D view until the model became small and shifted toward the upper-right of the canvas.","intent":"Adjust the 3D camera for model inspection.","app":"Autodesk Revit","details":null},{"start_s":27715.579,"end_s":27725.174,"action":"Continued middle-mouse navigation and scrolling in the 3D view, bringing a closer angled view of rooms, walls, furniture, and bathroom areas into the canvas.","intent":"Inspect interior model elements from another 3D angle.","app":"Autodesk Revit","details":"The final view showed multiple furnished rooms and bathroom fixtures."},{"start_s":27725.174,"end_s":27734.437,"action":"Clicked and scrolled through the Revit 3D view, moving from an angled apartment view to a more top-down view of bedrooms and living areas; made several middle-clicks in the model.","intent":"Navigate and inspect the building model.","app":"Autodesk Revit","details":null},{"start_s":27734.437,"end_s":27741.56,"action":"Clicked and scrolled in the 3D view to zoom out from a room cluster and reveal a broader overview of the floor layout.","intent":"Review the overall floor arrangement.","app":"Autodesk Revit","details":null},{"start_s":27741.56,"end_s":27751.369,"action":"Paused on the zoomed-out 3D floor overview, then middle-clicked within the view without a visible model change.","intent":"Continue inspecting the model overview.","app":"Autodesk Revit","details":null},{"start_s":27751.369,"end_s":27761.414,"action":"Clicked and scrolled to zoom into the apartment interiors, bringing bedrooms and a dining area into view; pressed Tab and clicked a wall or curtain-wall element.","intent":"Inspect and select an interior building element.","app":"Autodesk Revit","details":null},{"start_s":27761.414,"end_s":27770.095,"action":"Clicked and repeatedly scrolled through the model, moving across close-up wall and room views; made several clicks and key presses while the view shifted to a close-up tiled room and wall.","intent":"Navigate and inspect detailed model geometry.","app":"Autodesk Revit","details":null},{"start_s":27770.095,"end_s":27779.766,"action":"Scrolled to reposition the close-up view, pressed Tab, then clicked near the upper-right of the Revit window; the window briefly changed size and a plumbing fixture became selected, showing the Modify | Plumbing Fixtures contextual ribbon and element properties.","intent":"Select and inspect a plumbing fixture in the model.","app":"Autodesk Revit","details":"Selected element shown as Plumbing_Fixtures_Shower_Head_Metal_Shower_Head, hosted on Floor: TOILET."},{"start_s":27779.766,"end_s":27787.068,"action":"Switched from the 3D view to the GL floor plan, scrolled the view, and clicked the drawing area; the GL plan opened after the title changed.","intent":"Open and inspect the GL floor plan.","app":"Autodesk Revit","details":"The view changed from a furnished 3D model to the GL floor plan."},{"start_s":27787.068,"end_s":27807.068,"action":"Remained idle while viewing the GL floor plan, centered on the labeled M. TOILET area.","intent":"Review the floor plan.","app":"Autodesk Revit","details":"No recorded interaction events occurred."},{"start_s":27807.068,"end_s":27821.705,"action":"Scrolled the GL floor plan to reposition the view and reveal more of the toilet and adjacent rooms.","intent":"Inspect a different portion of the floor plan.","app":"Autodesk Revit","details":"The view remained focused on the M. TOILET area and nearby fixtures."},{"start_s":27821.705,"end_s":27828.743,"action":"Scrolled and entered keyboard input while navigating the plan; Revit switched into Modify | Place Component mode with a shower-head family selected.","intent":"Prepare to place a plumbing component.","app":"Autodesk Revit","details":"The selected family was Plumbing_Fixtures_Shower_Head, Metal_Shower_Head."},{"start_s":27828.743,"end_s":27836.323,"action":"Scrolled extensively through the plan and opened the component type selector, browsing available families and recently used types.","intent":"Choose a component type for placement.","app":"Autodesk Revit","details":"The type list displayed plumbing fixtures, furniture, and other recently used families."},{"start_s":27836.323,"end_s":27845.875,"action":"Selected the Plumbing_Fixtures_Sink_Cloakroom type, entered 4' and confirmed it, then clicked in the plan to position the sink component near the dressing-room wall.","intent":"Place a cloakroom sink component in the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Place Component mode; the sink preview appeared beside the dressing area."},{"start_s":27845.875,"end_s":27856.113,"action":"Scrolled through the GL floor plan, dismissed active commands with Escape, and middle-clicked within the plan to reposition the view.","intent":"Navigate and inspect the floor plan.","app":"Autodesk Revit","details":"The view shifted to show the bedroom, dining, kitchen, utility, and lobby areas."},{"start_s":27856.113,"end_s":27865.863,"action":"Tabbed through controls, scrolled and typed WA, then clicked in the bathroom area; Revit activated Place Wall mode with a curtain wall selected.","intent":"Initiate wall placement near Toilet-2.","app":"Autodesk Revit","details":"The selected wall type was Curtain Wall: Curtain_Wall-Empty."},{"start_s":27865.863,"end_s":27884.87,"action":"Clicked near the bathroom and utility boundary, exited and re-entered commands, then typed CM and activated Place Component; selected the Toilet-2 area and repositioned the view.","intent":"Prepare to place a component in the floor plan.","app":"Autodesk Revit","details":"Place Component mode showed the Plumbing_Fixtures_Sink_Cloak family ready for placement."},{"start_s":27884.87,"end_s":27889.947,"action":"Scrolled through the available component-type list and clicked the list area to browse additional families.","intent":"Browse component families for a suitable placement.","app":"Autodesk Revit","details":"The component browser displayed multiple family types, including support, wardrobe, and WC entries."},{"start_s":27889.947,"end_s":27900.464,"action":"Returned to the Revit plan, scrolled and clicked to place or position the selected WC_-Disabled component, then zoomed into Toilet-2.","intent":"Position the disabled-toilet fixture in the bathroom.","app":"Autodesk Revit","details":"Revit displayed a geometry-collision warning, and the view ended zoomed into the toilet and sink."},{"start_s":27900.464,"end_s":27911.486,"action":"Middle-clicked and pressed Escape, scrolled across the floor plan, then typed CM and switched back to the component-placement context while zooming toward the kitchen and utility area.","intent":"Continue navigating and preparing component placement.","app":"Autodesk Revit","details":"The WC_-Disabled family remained selected and the view ended centered on the kitchen, Toilet-2, utility, and lobby."},{"start_s":27911.486,"end_s":27921.266,"action":"Switched to Revit, navigated the GL floor plan, and continued placing a shower-head plumbing fixture near the bathroom and kitchen area.","intent":"Position a plumbing fixture in the floor plan.","app":"Autodesk Revit","details":"The selected family was Plumbing_Fixtures_Shower_Head, and Revit remained in Modify | Place Component mode."},{"start_s":27921.266,"end_s":27930.849,"action":"Scrolled and adjusted the floor-plan view, then pressed Escape several times; Revit displayed a warning that none of the created elements were visible in the GL floor plan.","intent":"Review or exit the fixture-placement operation and inspect the model view.","app":"Autodesk Revit","details":"The warning suggested checking the active view, visibility settings, or Plan Regions."},{"start_s":27930.849,"end_s":27945.741,"action":"Clicked and dragged in the floor plan to work around Toilet-1, briefly entered wall-placement mode, then pressed Escape and returned to component placement.","intent":"Modify or inspect bathroom elements around Toilet-1.","app":"Autodesk Revit","details":"The view was zoomed into Toilet-1 beside the living area; the selected type shown during wall placement was Curtain Wall."},{"start_s":27945.741,"end_s":27961.987,"action":"Selected a point in Toilet-1 and placed or previewed a disabled toilet arrangement; scrolled and continued positioning the component while Revit again showed a visibility warning.","intent":"Place a toilet fixture in Toilet-1.","app":"Autodesk Revit","details":"The selected family was WC_-Disabled, labeled Disabled Toilet Arrangement."},{"start_s":27961.987,"end_s":27969.329,"action":"Scrolled the view while remaining in component placement, opening the type-selection list and browsing available families and recently used types.","intent":"Choose the next plumbing or building component to place.","app":"Autodesk Revit","details":"The list showed families including Plumbing_Fixtures_Shower_Head and Plumbing_Fixtures_Sink_Cloakroom."},{"start_s":27969.329,"end_s":27978.109,"action":"Selected Plumbing_Fixtures_Sink_Cloakroom, entered a 4-foot value, and positioned the sink component in the Toilet-1 plan view.","intent":"Place and position a cloakroom sink in Toilet-1.","app":"Autodesk Revit","details":"The selected sink type was 440x350x120mm; the final view showed the sink at the upper-right side of Toilet-1."},{"start_s":27978.109,"end_s":27988.114,"action":"Scrolled and zoomed the GL floor plan out to review a broader apartment layout, with intermittent middle-click navigation and Escape presses.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":null},{"start_s":27988.114,"end_s":27997.909,"action":"Scrolled and zoomed toward the lower-right portion of the floor plan, bringing the kitchen, POOJA, Toilet-2, utility area, and goods lift into view.","intent":"Inspect the lower-right rooms and circulation area.","app":"Autodesk Revit","details":null},{"start_s":27997.909,"end_s":28006.582,"action":"Continued navigating and zooming across the floor plan toward the central lobby and lift area, then selected a wall near the lobby.","intent":"Inspect the lobby and select a wall element.","app":"Autodesk Revit","details":"The selected element was a Basic Wall (W7)."},{"start_s":28006.582,"end_s":28021.361,"action":"Scrolled to another apartment area, dismissed the wall selection, and activated Place Component mode; the view ended centered on Bedroom-1 and the adjacent toilets.","intent":"Prepare to place a component in the floor plan.","app":"Autodesk Revit","details":"Place Component mode showed a plumbing fixture sink family in the Properties panel."},{"start_s":28021.361,"end_s":28028.123,"action":"Scrolled and opened the component type/search list while remaining in Place Component mode, browsing available families and recent types.","intent":"Browse component families for placement.","app":"Autodesk Revit","details":"The list displayed plumbing and furniture-related types, including sink, shower head, and furniture entries."},{"start_s":28028.123,"end_s":28042.02,"action":"Adjusted the view around Bedroom-1 and changed the active component selection to “suite elevator closet,” leaving Place Component mode active without a visible placement click.","intent":"Select a component type and position the view for possible placement.","app":"Autodesk Revit","details":"The selected family was shown in the Properties panel as suite elevator closet."},{"start_s":28042.02,"end_s":28046.764,"action":"Scrolled through the component type list in Revit and clicked to activate the Autodesk Revit window, leaving the Place Component type selector open.","intent":"Review available component families before placement.","app":"Autodesk Revit","details":"Floor Plan: GL; visible type list included furniture and appliance families."},{"start_s":28046.764,"end_s":28054.174,"action":"Scrolled the component list, selected the student desk family, and zoomed into the bedroom area of the floor plan.","intent":"Prepare a desk component for placement in the bedroom.","app":"Autodesk Revit","details":"Properties showed Escritorio_de_estudiante_de_600x740mm; the bedroom was displayed at close range."},{"start_s":28054.174,"end_s":28066.216,"action":"Scrolled and changed the active family to Furniture_Chair_Office, then clicked in the bedroom to position the component preview and pressed Escape to end the placement interaction.","intent":"Position an office chair component near the bedroom desk.","app":"Autodesk Revit","details":"The chair preview appeared near the upper-right bedroom furniture; placement status remained active during the interval."},{"start_s":28066.216,"end_s":28076.535,"action":"Navigated the floor plan with middle-button clicks and zoom/pan movements, moving from the bedroom toward the dining, drawing, and kitchen areas.","intent":"Inspect other rooms and furniture locations in the floor plan.","app":"Autodesk Revit","details":"The view ended centered on the drawing room and adjacent dining and kitchen areas."},{"start_s":28076.535,"end_s":28087.025,"action":"Continued panning and zooming across the dining, drawing, kitchen, utility, and master-bedroom areas, then returned to the component-placement context.","intent":"Review the layout while preparing for further component work.","app":"Autodesk Revit","details":"The final view showed the dining, drawing, kitchen, and master bedroom; Furniture_Chair_Office was visible in Properties."},{"start_s":28087.025,"end_s":28093.099,"action":"Scrolled the active component type selector and clicked within the list, changing the visible entries from desk and sofa families to named chair, rack, refrigerator, and sofa types.","intent":"Browse alternative furniture component families for selection.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible behind the open type list."},{"start_s":28093.099,"end_s":28104.15,"action":"Switched to Autodesk Revit, adjusted the floor-plan view with repeated scrolling, and clicked within the drawing while the Place Component tool remained active.","intent":"Navigate and inspect the GL floor plan around the dining and drawing areas.","app":"Autodesk Revit","details":"The view zoomed toward the drawing room and a wall was highlighted."},{"start_s":28104.15,"end_s":28120.646,"action":"Exited the active command with Escape, scrolled and navigated the floor plan, then clicked in the drawing near the bedroom and returned to component placement.","intent":"Reposition the view and resume component placement in the floor plan.","app":"Autodesk Revit","details":"The view moved from the dining area toward the master bedroom and kitchen."},{"start_s":28120.646,"end_s":28131.297,"action":"Opened the component type list, clicked the listed LR2075_RACK_DE_TV_MONTANA family, and returned to the floor plan with that component selected for placement.","intent":"Select a furniture component for insertion into the floor plan.","app":"Autodesk Revit","details":"The selected family was LR2075_RACK_DE_TV_MONTANA."},{"start_s":28131.297,"end_s":28137.949,"action":"Scrolled through the open component type list and reviewed available families and types without placing a visible component.","intent":"Browse component types while preparing a placement.","app":"Autodesk Revit","details":"The list was scrolled to entries including Support_Metal_Circular, Wardrobe-Family, and WC types."},{"start_s":28137.949,"end_s":28149.404,"action":"Changed the selected component to suite elevator closet, zoomed and scrolled into the master bedroom, and clicked to position the component near the left side of the room.","intent":"Place the selected suite elevator closet component in the master bedroom.","app":"Autodesk Revit","details":"The component preview appeared along the bedroom's left wall while placement mode remained active."},{"start_s":28149.404,"end_s":28159.915,"action":"Scrolled through the component type list while keeping the master-bedroom placement view visible, reviewing furniture and appliance families without confirming another placement.","intent":"Browse alternative component types for continued placement.","app":"Autodesk Revit","details":"Visible entries included Conjunto Mesa 01, Cook_Top_(2), desk, sink, and office chair families."},{"start_s":28159.915,"end_s":28169.33,"action":"Reactivated Autodesk Revit, resized the window, and interacted with the active furniture placement view showing the master bedroom plan.","intent":"Continue placing or positioning a furniture component in the floor plan.","app":"Autodesk Revit","details":"The active component was a student desk furniture family."},{"start_s":28169.33,"end_s":28180.615,"action":"Selected the Furniture_Chair_Office family, positioned its preview near the bedroom furniture, scrolled through the view, and canceled placement attempts before typing a search fragment.","intent":"Choose and position an office chair component in the floor plan.","app":"Autodesk Revit","details":"The chair preview showed temporary placement dimensions near the master bedroom."},{"start_s":28180.615,"end_s":28190.167,"action":"Scrolled across the floor plan toward the kitchen and toilet area, opened the component family browser, and selected a plumbing sink family.","intent":"Browse available families and prepare a plumbing fixture for placement.","app":"Autodesk Revit","details":"The family browser displayed kitchen and bathroom plan areas behind it; the selected family was Plumbing_Fixtures_Sink_Cloakroom."},{"start_s":28190.167,"end_s":28205.994,"action":"Canceled placement interactions, entered search text, switched to wall placement, and then returned to component placement while viewing the toilet and utility area.","intent":"Switch between wall and component placement tools while working in the bathroom area.","app":"Autodesk Revit","details":"The wall tool showed Curtain Wall; the final state returned to a plumbing fixture placement preview."},{"start_s":28205.994,"end_s":28217.342,"action":"Scrolled within the floor plan and changed the active family to WC_-Disabled, leaving the component placement tool active over the toilet area.","intent":"Browse and select a disabled-toilet plumbing fixture for placement.","app":"Autodesk Revit","details":"The selected family was labeled WC_-Disabled, Disabled Toilet Arrangement."},{"start_s":28217.342,"end_s":28226.94,"action":"Scrolled through the component family list, reviewed furniture and plumbing families, and hovered over Plumbing_Fixtures_Sink_Cloakroom to show its preview.","intent":"Review available component families before selecting the next fixture.","app":"Autodesk Revit","details":"No component was visibly placed during this interval."},{"start_s":28226.94,"end_s":28240.796,"action":"Selected a plumbing fixture and edited its elevation field to 4 feet, then returned to the Revit floor plan with the fixture ready for placement.","intent":"Adjust the selected plumbing fixture’s elevation before placing it.","app":"Autodesk Revit","details":"Floor Plan: GL; selected Plumbing_Fixtures_Sink_Cloakroom."},{"start_s":28240.796,"end_s":28251.719,"action":"Selected a shower-head plumbing fixture and edited its elevation field to 4 feet while remaining in placement mode on the GL floor plan.","intent":"Adjust the shower head’s elevation before placement.","app":"Autodesk Revit","details":"Selected Plumbing_Fixtures_Shower_Head; the elevation field shows an entered value of 4."},{"start_s":28251.719,"end_s":28262.578,"action":"Dismissed the warning and exited the active placement interaction, then zoomed out and navigated across the GL floor plan.","intent":"Review the floor plan and clear the placement warning or active command.","app":"Autodesk Revit","details":"Warning stated that created elements were not visible in Floor Plan: GL; no placement location was confirmed."},{"start_s":28262.578,"end_s":28272.135,"action":"Zoomed and panned through the GL floor plan from the central layout toward the bedroom and toilet area, then changed the active tool or selection.","intent":"Navigate to another area of the floor plan for inspection or placement.","app":"Autodesk Revit","details":"Views included the dining, kitchen, bedroom, toilet, and lobby areas."},{"start_s":28272.135,"end_s":28287.755,"action":"Scrolled through the Revit floor plan while the component placement interface remained active, opening the recent and available family list and browsing entries such as furniture and plumbing components.","intent":"Browse available families for the next component placement.","app":"Autodesk Revit","details":"Family browser showed recent and available types including shower head, sink, cooktop, wardrobe, and furniture entries."},{"start_s":28287.755,"end_s":28302.317,"action":"Browsed and adjusted the view around Bedroom-2, then selected the suite elevator closet family and repositioned the view to show the surrounding bedroom and toilet area.","intent":"Prepare or inspect placement of the selected furniture family in the floor plan.","app":"Autodesk Revit","details":"Selected family: suite elevator closet; active mode remained Modify | Place Component."},{"start_s":28302.317,"end_s":28314.508,"action":"Switched to Autodesk Revit, entered component placement mode, and interacted with the GL floor plan near Bed Room-2; then exited or changed the active command.","intent":"Place or manage a component in the floor plan.","app":"Autodesk Revit","details":"A component placement preview was active initially; the final view showed the GL floor plan without an active placement preview."},{"start_s":28314.508,"end_s":28319.207,"action":"Entered the component type search/list and browsed available families while remaining in Place Component mode.","intent":"Choose a furniture component for placement.","app":"Autodesk Revit","details":"The list showed families including Basic_workdek_7034, Cama, sofa, table, and Cook_Top."},{"start_s":28319.207,"end_s":28326.291,"action":"Selected the Furniture_Chair_Office family and positioned its placement preview near the upper-right side of Bed Room-2.","intent":"Prepare an office chair component for placement in the room.","app":"Autodesk Revit","details":"The selected type was Furniture_Chair_Office, sized 650x470x410mm; the chair preview and temporary dimensions were visible."},{"start_s":28326.291,"end_s":28336.738,"action":"Browsed and scrolled through the component type list, moving from plumbing and sofa families to TV-related furniture types.","intent":"Find a suitable furniture or TV component.","app":"Autodesk Revit","details":"The list displayed Plumbing_Fixtures, Santiago_Sofa, Silla, Sink, elevator closet, sofa, Furniture_TV_Plasma, and related types."},{"start_s":28336.738,"end_s":28342.635,"action":"Selected the Furniture_TV_Plasma 50-inch type and placed or adjusted its preview along the right wall of Bed Room-2.","intent":"Place a 50-inch TV component in the room.","app":"Autodesk Revit","details":"The TV component was visible against the right-side wall with alignment and temporary dimension guides."},{"start_s":28342.635,"end_s":28362.635,"action":"Remained idle in Autodesk Revit with the Furniture_TV_Plasma 50-inch component selected on the right wall of Bed Room-2.","intent":"Review the placed TV component and its position.","app":"Autodesk Revit","details":"No interaction events were recorded during this interval."},{"start_s":28362.635,"end_s":28382.635,"action":"Remained idle in Autodesk Revit while the floor plan stayed open; system and network state changes occurred near the end of the interval.","intent":"No active modeling operation was evident.","app":"Autodesk Revit","details":null},{"start_s":28382.635,"end_s":28392.839,"action":"Pressed Escape several times, navigated with Tab and scrolling, and switched from the GL floor plan to the 3D view.","intent":"Exited the active component-placement context and inspected the model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}."},{"start_s":28392.839,"end_s":28402.827,"action":"Scrolled within the 3D view to adjust the displayed model orientation or position.","intent":"Inspected the building model in 3D.","app":"Autodesk Revit","details":null},{"start_s":28402.827,"end_s":28411.816,"action":"Middle-clicked and scrolled repeatedly in the 3D view, navigating across and zooming out from the building layout.","intent":"Reviewed a larger portion of the 3D building model.","app":"Autodesk Revit","details":"The view progressed from a close apartment cluster to a broader multi-unit layout."},{"start_s":28411.816,"end_s":28429.041,"action":"Returned to the GL floor plan, entered a component-placement workflow, and typed a 4-foot value while interacting with the plan.","intent":"Prepared or adjusted placement of a furniture component in the floor plan.","app":"Autodesk Revit","details":"The plan showed Bed Room-2 with a component-placement crosshair and temporary dimensions."},{"start_s":28429.041,"end_s":28439.946,"action":"Opened the component type selector, scrolled through furniture families, zoomed the floor plan toward Bed Room-2, and pressed Escape to end the active placement interaction.","intent":"Selected or reviewed a TV furniture family and positioned the view for placement.","app":"Autodesk Revit","details":"The selector initially showed Furniture_TV_Plasma 50-inch and later 42-inch."},{"start_s":28439.946,"end_s":28450.395,"action":"Exited active commands, navigated the Revit floor plan by panning and zooming, and reviewed the dining, drawing, kitchen, bedrooms, and corridor areas.","intent":"Review the floor plan layout and position the view for further editing.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible."},{"start_s":28450.395,"end_s":28460.936,"action":"Panned and zoomed to the upper bedrooms and toilets, typed “WA,” and activated the Curtain Wall placement tool around the toilet area.","intent":"Prepare to modify or place a wall element near the toilets.","app":"Autodesk Revit","details":"The view focused on TOILET-1 and TOILET-2; Modify | Place Wall showed Curtain Wall / Curtain_Wall-Empty."},{"start_s":28460.936,"end_s":28476.725,"action":"Adjusted the active wall placement around the toilet rooms, exited the wall command, and entered component placement mode with Furniture_TV_Plasma 42\" selected.","intent":"Transition from wall editing to placing a furniture component in the floor plan.","app":"Autodesk Revit","details":"Temporary dimensions appeared near the right side of TOILET-2 before the component tool became active."},{"start_s":28476.725,"end_s":28483.143,"action":"Scrolled through the component type list while keeping component placement active, moving from furniture entries to other available families.","intent":"Browse available component families for placement.","app":"Autodesk Revit","details":"The type browser displayed entries including furniture, TV rack, refrigerator, seating, and planting families."},{"start_s":28483.143,"end_s":28493.183,"action":"Selected Plumbing_Fixtures_Sink_Cloakroom, entered a 4-foot value, and positioned the sink component near the toilet-room area.","intent":"Configure and place a cloakroom sink family in the floor plan.","app":"Autodesk Revit","details":"The selected sink showed Level GL and an elevation/host offset of 4.000 feet."},{"start_s":28493.183,"end_s":28512.419,"action":"Placed or previewed another sink component near TOILET-2, exited placement commands with Escape, and moved the active sink preview toward the left side of the plan.","intent":"Continue placing plumbing fixtures and conclude the current placement sequence.","app":"Autodesk Revit","details":"The sink family remained active in Modify | Place Component mode; the final view showed its preview left of TOILET-1."},{"start_s":28512.419,"end_s":28527.931,"action":"Switched to Revit and worked in the GL floor plan with the WC_-Disabled toilet arrangement active, clicking and adjusting the selected component around the toilet rooms.","intent":"Position or adjust a plumbing fixture component in the floor plan.","app":"Autodesk Revit","details":"The view showed TOILET-1 and TOILET-2; the component placement tool remained active."},{"start_s":28527.931,"end_s":28531.987,"action":"Opened the Revit component/type list, reviewed available families and recently used types, and returned to the floor plan with the WC_-Disabled arrangement selected.","intent":"Review or select a component type for placement.","app":"Autodesk Revit","details":"The list included plumbing and furniture families, including WC_-Disabled."},{"start_s":28531.987,"end_s":28543.125,"action":"Selected the Plumbing_Fixtures_Shower_Head type and clicked repeatedly in the floor plan near the bathroom area, leaving the shower-head component in placement mode while the view zoomed toward TOILET-2.","intent":"Place a shower-head plumbing fixture in the bathroom plan.","app":"Autodesk Revit","details":"The selected type was Metal_Shower_Head; a warning window appeared at the end of the span."},{"start_s":28543.125,"end_s":28550.717,"action":"Continued positioning the shower-head component in the zoomed bathroom plan and scrolled the view; Revit displayed a warning that some created elements were not visible in the GL floor plan.","intent":"Continue fixture placement while reviewing its visibility in the current view.","app":"Autodesk Revit","details":"The warning advised checking the active view, element visibility settings, and Plan Regions."},{"start_s":28550.717,"end_s":28563.593,"action":"Dismissed the warning with Escape, navigated from the GL floor plan to the 3D view, and left the model in a zoomed floor-plan-like 3D view with the warning still visible.","intent":"Exit the placement state and inspect the model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}."},{"start_s":28563.593,"end_s":28582.631,"action":"Scrolled extensively in the 3D view to zoom out and reveal more of the building, then clicked the model and entered 150MM, confirming the value.","intent":"Inspect the building model and set a 150 mm value for the selected element or tool.","app":"Autodesk Revit","details":"The 3D view ended with a broad overhead view of rooms and furnishings."},{"start_s":28582.631,"end_s":28592.312,"action":"Selected doors in the Revit 3D view, pressed Escape to clear or cancel selections, and adjusted the view slightly.","intent":"Inspect or navigate the door layout in the 3D model.","app":"Autodesk Revit","details":"A door and then a floor region were visibly highlighted during the interval."},{"start_s":28592.312,"end_s":28600.7,"action":"Selected a door, entered edit mode, and changed the visible dimension value to 150MM, confirming the entry.","intent":"Modify a door-related dimension in the Revit model.","app":"Autodesk Revit","details":"The selected door type was shown as a 2.5' door; the view was zoomed out to show more of the floor."},{"start_s":28600.7,"end_s":28609.003,"action":"Exited the active edit state and navigated the 3D view with middle-button clicks and scrolling, changing the framing across rooms.","intent":"Review different areas of the building model.","app":"Autodesk Revit","details":"The selection changed from an edited element to a highlighted floor or room area."},{"start_s":28609.003,"end_s":28619.744,"action":"Continued navigating and rotating or zooming the 3D view with middle-button clicks and scroll gestures, moving from a top floor layout to a closer view of bedrooms and walls.","intent":"Inspect the building interior from different 3D viewpoints.","app":"Autodesk Revit","details":"The final view showed a close-up of rooms, doors, windows, and interior furnishings."},{"start_s":28619.744,"end_s":28629.795,"action":"Selected a door, edited its dimension field, and entered 150MM; then scrolled and zoomed the 3D view back to a wider building overview.","intent":"Modify another door dimension and review its placement in context.","app":"Autodesk Revit","details":"The selected element was a 3.5' glazed-bar door, and the final view showed multiple rooms and corridors."},{"start_s":28629.795,"end_s":28639.895,"action":"Navigated the Revit 3D model with repeated middle-button view movements, panning or zooming across the building; then pressed a save shortcut while the application window briefly resized or hid.","intent":"Review the model and save the current Revit work.","app":"Autodesk Revit","details":"The model remained visible as a multi-room building layout; window resize and visibility events occurred at the end."},{"start_s":28639.895,"end_s":28659.895,"action":"Returned to the Autodesk Revit 3D view and left the building model visible without further interaction.","intent":"Resume viewing the architectural model.","app":"Autodesk Revit","details":null},{"start_s":28659.895,"end_s":28664.853,"action":"Clicked the taskbar area, initiating a switch away from the Revit window.","intent":"Switch applications.","app":"Windows taskbar","details":null},{"start_s":28664.853,"end_s":28684.853,"action":"Switched back to Autodesk Revit and displayed the GL floor plan, showing the apartment layout and central lobby; briefly reviewed the plan.","intent":"Inspect the GL floor plan.","app":"Autodesk Revit","details":"The view changed from the 3D model to the GL floor plan."},{"start_s":28684.853,"end_s":28704.853,"action":"Remained idle while viewing the GL floor plan.","intent":"Continue reviewing the floor plan.","app":"Autodesk Revit","details":null},{"start_s":28704.853,"end_s":28713.597,"action":"Scrolled within the GL floor plan to zoom into the apartment and lobby area, bringing room labels and dimensions into closer view.","intent":"Examine floor-plan details.","app":"Autodesk Revit","details":"The view became a closer view of bedrooms, dining, kitchen, stairs, lifts, and the lobby."},{"start_s":28713.597,"end_s":28730.822,"action":"Continued scrolling and panning/zooming around the GL floor plan, then middle-clicked in the drawing area; typed “CM” and clicked near the lower-left taskbar area, leaving Revit in Modify | Place Component mode with a plumbing fixture shower-head type selected.","intent":"Navigate the floor plan and begin placing a component.","app":"Autodesk Revit","details":"The final view shows the lobby and lifts, with the Properties panel identifying a Plumbing_Fixtures_Shower_H... type."},{"start_s":28730.822,"end_s":28750.822,"action":"Switched to Autodesk Revit and scrolled through the open component/family list while the GL floor plan remained visible.","intent":"Browse available Revit components for placement.","app":"Autodesk Revit","details":"The component browser showed entries including shower head, sink, furniture, grab rails, and generic models."},{"start_s":28750.822,"end_s":28761.309,"action":"Scrolled further through the component list, then clicked within the list to inspect different family entries.","intent":"Continue browsing Revit families for a suitable component.","app":"Autodesk Revit","details":"The list displayed support metal, termination wood, wardrobe, WC, and related family entries; no placement was visibly completed."},{"start_s":28761.309,"end_s":28773.039,"action":"Clicked a family entry and scrolled through more component names, then pressed Escape to leave the current interaction.","intent":"Review additional available families without placing one.","app":"Autodesk Revit","details":"The browser showed furniture and appliance families, including sofas, chairs, refrigerators, tables, and desks."},{"start_s":28773.039,"end_s":28777.196,"action":"Pressed Escape several times, switched to File Explorer, selected a Revit family file in the Aluprof download folder, and returned to Revit, which opened a Model Upgrade prompt.","intent":"Open an external Revit family for use in the project.","app":"Autodesk Revit / Windows Explorer","details":"The selected file was an Aluprof MB-82HS sliding-door Revit family; Revit reported that the model required upgrading from Revit 2020 to Revit 2025."},{"start_s":28777.196,"end_s":28781.306,"action":"Allowed the Revit model upgrade to proceed and waited while the dialog reported conversion from Autodesk Revit 2020 to Autodesk Revit 2025.","intent":"Upgrade the external family to the current Revit version.","app":"Autodesk Revit","details":"The Model Upgrade progress dialog remained visible; completion was not shown in this span."},{"start_s":28781.306,"end_s":28785.65,"action":"Waited for the upgraded family to open, then opened the Load into Projects dialog and left PROJECT 11 selected.","intent":"Load the upgraded sliding-door family into the project.","app":"Autodesk Revit","details":"The family editor displayed the sliding-door preview, and the dialog listed PROJECT 11 as checked."},{"start_s":28785.65,"end_s":28789.77,"action":"Switched from the Revit family editor to File Explorer to view the selected Aluprof Revit family, then closed Explorer and returned to Revit, dismissing the existing-family prompt.","intent":"Review the family file and return to the project after an existing-family warning.","app":"Autodesk Revit; Windows Explorer","details":"Revit showed a “Family Already Exists” window; Explorer displayed the selected Aluprof family file."},{"start_s":28789.77,"end_s":28804.625,"action":"Returned to the GL floor plan, adjusted the view around the elevator lobby, and selected the raster image, leaving the raster image tools active.","intent":"Inspect and work in the elevator-lobby area of the floor plan.","app":"Autodesk Revit","details":"The view showed multiple lifts and the lobby; the raster image was selected at the end."},{"start_s":28804.625,"end_s":28814.211,"action":"Adjusted the floor-plan view and used the Scale tool on the raster image, placing a scale reference that displayed approximately 2.833 feet.","intent":"Calibrate the imported raster image against the floor plan.","app":"Autodesk Revit","details":"The Scale contextual mode was active and a temporary 2.833-foot dimension was visible."},{"start_s":28814.211,"end_s":28824.801,"action":"Exited the scale operation, selected the door placement tool, and positioned a door instance near the elevator lobby, leaving Revit in Place Door mode.","intent":"Place a sliding-door family in the lobby plan.","app":"Autodesk Revit","details":"The door preview and temporary dimensions appeared near the lift opening."},{"start_s":28824.801,"end_s":28838.946,"action":"Opened Type Properties for the Aluprof sliding-door family, changed or confirmed the type as 4 feet through the type/name dialogs, and applied the change before returning to the plan.","intent":"Set the sliding-door type width to 4 feet.","app":"Autodesk Revit","details":"Type Properties showed the Aluprof family with type 4' and width 4.000'."},{"start_s":28838.946,"end_s":28848.417,"action":"Returned to Place Door mode and placed or adjusted the 4-foot sliding door at the lift opening; Revit displayed temporary dimensions and a geometry-collision warning.","intent":"Position the configured sliding door in the lobby opening.","app":"Autodesk Revit","details":"The selected door remained at the opening, with a warning that existing geometry might not be copied."},{"start_s":28848.417,"end_s":28857.728,"action":"Resize and repositioned the Revit window, then panned the floor plan while the sliding door tool remained active.","intent":"Position the floor plan to place or inspect a door near the lift area.","app":"Autodesk Revit","details":"Floor Plan: GL; door type shown as Aluprof_MB-82HS-SI_SlidingDoor_Slide-Fix."},{"start_s":28857.728,"end_s":28868.086,"action":"Resized the Revit window, panned across the lift area, and used repeated scroll gestures to adjust the view.","intent":"Navigate the floor plan while continuing door placement or inspection.","app":"Autodesk Revit","details":"The sliding door placement mode remained active and dimensions were visible near the lift openings."},{"start_s":28868.086,"end_s":28877.467,"action":"Clicked and scrolled through the floor plan, moving from the lift area toward the lobby and corridor; a geometry-collision warning was visible after the interaction.","intent":"Navigate and attempt to position the selected sliding door in another floor-plan location.","app":"Autodesk Revit","details":"Visible areas included the lobby, wide utility room, toilets, and shafts."},{"start_s":28877.467,"end_s":28888.077,"action":"Scrolled and pressed Escape several times to cancel the active placement or selection, then switched from the GL floor plan to the 3D view.","intent":"Exit the door placement workflow and inspect the model in 3D.","app":"Autodesk Revit","details":"The title changed to PROJECT 11 - 3D View: {3D}."},{"start_s":28888.077,"end_s":28898.406,"action":"Scrolled and middle-clicked within the 3D view to orbit or navigate the building model, changing its orientation and framing.","intent":"Inspect the building layout and doors in 3D.","app":"Autodesk Revit","details":"The 3D view showed the multi-room building model from an angled top perspective."},{"start_s":28898.406,"end_s":28909.219,"action":"Selected a sliding door in the 3D view, pressed Escape, and scrolled to adjust the model view while leaving the door unselected.","intent":"Inspect the selected door and then return to an overall 3D model view.","app":"Autodesk Revit","details":"The selected door was highlighted in cyan in an exterior brick wall; the final view showed the broader building model."},{"start_s":28909.219,"end_s":28919.258,"action":"Switched from the 3D view to the GL floor plan and zoomed or panned across the furnished layout.","intent":"Navigate to and inspect the GL floor plan.","app":"Autodesk Revit","details":null},{"start_s":28919.258,"end_s":28929.578,"action":"Activated Place Dimensions, selected wall references around the master bedroom, and began positioning a linear dimension; entered dimension-related commands and canceled intermediate operations.","intent":"Add a dimension to the floor plan.","app":"Autodesk Revit","details":"The dimension tool was active and the plan showed a temporary 12-foot measurement."},{"start_s":28929.578,"end_s":28939.538,"action":"Selected wall references across the master bedroom, entered 12 feet, and confirmed the horizontal dimension; continued adjusting the view while the dimension remained active.","intent":"Place and confirm a 12-foot bedroom dimension.","app":"Autodesk Revit","details":"A visible 12.0-foot dimension spans the master bedroom."},{"start_s":28939.538,"end_s":28948.968,"action":"Placed another dimension reference near the master bedroom and entered 12 feet, leaving the dimension tool active while selecting nearby wall geometry.","intent":"Add or adjust a second bedroom dimension.","app":"Autodesk Revit","details":"The plan displayed a 12.0-foot dimension and selected wall geometry near the bedroom and balcony."},{"start_s":28948.968,"end_s":28962.168,"action":"Selected the vertical bedroom references and displayed a 12-foot dimension, then switched to Place Text and repositioned the view toward the upper bedroom and living area.","intent":"Measure the bedroom and prepare to add a text annotation.","app":"Autodesk Revit","details":"The vertical 12.0-foot dimension was visible before the text tool became active."},{"start_s":28962.168,"end_s":28972.925,"action":"Selected the text placement area near the Dress room and typed the beginning of a label, 'M. BEDROO'.","intent":"Add a room text annotation to the floor plan.","app":"Autodesk Revit","details":"Place Text mode was active and the partial label appeared near the upper-left room."},{"start_s":28972.925,"end_s":28982.948,"action":"Edited the selected Revit text note, typing and revising the room label so it displayed “M.BED ROOM” with “12'X12'” beneath it.","intent":"Update the bedroom annotation text.","app":"Autodesk Revit","details":"Text note remained in edit mode."},{"start_s":28982.948,"end_s":29001.237,"action":"Exited text editing, clicked around the text note and view, and selected the bedroom annotation while navigating the Revit floor plan.","intent":"Select and prepare the text note for type-property changes.","app":"Autodesk Revit","details":"The bedroom note was visible on the GL floor plan."},{"start_s":29001.237,"end_s":29007.441,"action":"Opened Text Type Properties, duplicated the 2.5mm Arial text type, opened Rename, and entered “2MM” as the new type name.","intent":"Create a separate text-note type for the annotation.","app":"Autodesk Revit","details":"The duplicated type was shown as “2.5mm Arial 2” before renaming."},{"start_s":29007.441,"end_s":29011.945,"action":"Confirmed the type-property dialogs and returned to the floor plan with the bedroom text note selected.","intent":"Apply the renamed text type and continue editing the note.","app":"Autodesk Revit","details":"The Properties panel showed the selected text note type as 2MM."},{"start_s":29011.945,"end_s":29022.161,"action":"Opened the 2MM type properties, edited the Text Size field, and entered 2MM before confirming the dialog.","intent":"Adjust the text size setting for the custom text type.","app":"Autodesk Revit","details":"The Text Size field visibly changed during editing and the dialog remained open at the end."},{"start_s":29022.161,"end_s":29031.432,"action":"Returned to the floor plan, selected and dragged the bedroom text note, then middle-clicked and zoomed out to review its placement in the wider plan.","intent":"Reposition and inspect the updated bedroom annotation.","app":"Autodesk Revit","details":"The note remained selected and appeared smaller within the broader floor-plan view."},{"start_s":29031.432,"end_s":29040.457,"action":"Scrolled and dragged the selected M.BED ROOM text note upward within the floor plan, repositioning it from the lower bedroom area toward the upper bedroom.","intent":"Reposition the bedroom text annotation on the plan.","app":"Autodesk Revit","details":"Selected text note reads M.BED ROOM 12'X12' 2' 0\"."},{"start_s":29040.457,"end_s":29050.928,"action":"Continued dragging the M.BED ROOM text note and clicked around the note area, leaving it positioned over the upper-left bedroom.","intent":"Place and adjust the bedroom text annotation.","app":"Autodesk Revit","details":"The note is visible over the bedroom labeled BED ROOM-1."},{"start_s":29050.928,"end_s":29061.788,"action":"Opened text editing for the bedroom note, deleted characters, entered -1, and exited the edit state while the note displayed BED ROOM with 12'X12'.","intent":"Edit the bedroom annotation text.","app":"Autodesk Revit","details":"Text editing mode was visibly active; exact final text formatting is partially obscured."},{"start_s":29061.788,"end_s":29072.344,"action":"Tabbed through text-edit fields, selected the note over BED ROOM-2, dragged it within the room, and deleted characters from its text.","intent":"Adjust and edit the second bedroom annotation.","app":"Autodesk Revit","details":"The selected note over BED ROOM-2 displayed M.BED ROOM 12'X12'."},{"start_s":29072.344,"end_s":29082.769,"action":"Edited the BED ROOM-2 note by entering -2, then changed its displayed label and dimensions so it read BED ROOM-2 and 11'X12'.","intent":"Correct the second bedroom label and dimensions.","app":"Autodesk Revit","details":"Text-edit mode remained active and the final visible note reads BED ROOM-2 11'X12'."},{"start_s":29082.769,"end_s":29092.768,"action":"Exited text editing, returned to the floor plan, selected dimension placement, and began positioning an aligned dimension near BED ROOM-1.","intent":"Prepare to add or position a room dimension.","app":"Autodesk Revit","details":"The Modify | Place Dimensions tool was active at the end of the span."},{"start_s":29092.768,"end_s":29103.229,"action":"Exited dimension placement, navigated within the floor plan, and selected a text note near Bedroom-2 before leaving the selection active.","intent":"Navigate the Revit floor plan and select an annotation for editing.","app":"Autodesk Revit","details":"The GL floor plan remained visible; dimension placement was canceled and a Bedroom-2 note became selected."},{"start_s":29103.229,"end_s":29113.71,"action":"Navigated and zoomed the floor plan toward the lobby and drawing area, then selected the Bedroom-2 text note.","intent":"Locate and select the Bedroom-2 annotation.","app":"Autodesk Revit","details":"The Bedroom-2 note was selected in Modify | Text Notes mode."},{"start_s":29113.71,"end_s":29123.293,"action":"Opened the Bedroom-2 note for text editing, repositioned the edit box, and began replacing its text with “DRAWING ”.","intent":"Rename the selected room annotation.","app":"Autodesk Revit","details":"The note entered Edit Text mode and displayed the partially entered replacement label."},{"start_s":29123.293,"end_s":29133.672,"action":"Continued editing the note to replace the label and dimensions with “DRAWING 13'10\"X11'”, correcting characters while typing.","intent":"Set the drawing-room annotation text and dimensions.","app":"Autodesk Revit","details":"The edited note visibly read DRAWING 13'10\"X11' near the existing Drawing label."},{"start_s":29133.672,"end_s":29144.063,"action":"Moved and resized the edited text note across the floor plan, then zoomed out to review its placement.","intent":"Position and review the updated Drawing annotation.","app":"Autodesk Revit","details":"The updated note was shown near the drawing room in the wider GL floor-plan view."},{"start_s":29144.063,"end_s":29154.117,"action":"Moved the note toward the living area, opened it for editing, and replaced its label with “LIVING” while retaining the dimension text.","intent":"Rename the annotation for the living area.","app":"Autodesk Revit","details":"The active note visibly read LIVING 13'10\"X11' in Edit Text mode."},{"start_s":29154.117,"end_s":29168.882,"action":"Dragged and edited the selected living-room text note, entering the dimension text `10'10\"`; switched windows and left the note selected on the floor plan.","intent":"Modify the living-room annotation text.","app":"Autodesk Revit","details":"The selected text note displays LIVING and a 10'3\"X10'10\" dimension."},{"start_s":29168.882,"end_s":29183.595,"action":"Opened the text Type Properties, renamed the type to `1.5MM`, and confirmed the updated type settings.","intent":"Create or apply a smaller text-note type.","app":"Autodesk Revit","details":"Type Properties shows System Family: Text with type 1.5MM and text size 1.5MM."},{"start_s":29183.595,"end_s":29194.986,"action":"Returned to the floor plan, zoomed out, and tabbed through the model while keeping the living-room text note selected.","intent":"Review the annotation in the broader floor-plan context.","app":"Autodesk Revit","details":"The floor plan view expands to show surrounding rooms and the selected living-room note."},{"start_s":29194.986,"end_s":29205.166,"action":"Selected and repositioned the living-room text note, zooming and panning around the plan before exiting the active text-note interaction.","intent":"Adjust the annotation’s placement on the floor plan.","app":"Autodesk Revit","details":"The view moves from the overall plan toward the living room and kitchen area."},{"start_s":29205.166,"end_s":29215.366,"action":"Dragged the living-room text note to the right near the kitchen, then entered text-edit mode on the relocated note.","intent":"Reposition and edit a duplicate or relocated room annotation.","app":"Autodesk Revit","details":"The relocated note visibly reads LIVING and 10'3\"X10'10\"."},{"start_s":29215.366,"end_s":29225.097,"action":"Selected the room-name text in the relocated note and replaced it with `KITCHEN`, leaving the dimension line beneath it selected for continued editing.","intent":"Change the annotation’s room label from living room to kitchen.","app":"Autodesk Revit","details":"The note now displays KITCHEN above the existing 10'3\"X10'10\" text."},{"start_s":29225.097,"end_s":29235.128,"action":"Entered a room-dimension string, then selected and dragged the Kitchen text note on the floor plan.","intent":"Edit and reposition the Kitchen annotation.","app":"Autodesk Revit","details":"The Kitchen note showing 8'0\"X12'0\" was selected and moved."},{"start_s":29235.128,"end_s":29246.172,"action":"Exited text editing, zoomed or panned to the broader floor plan, and dragged the Living text note toward the upper-left area of the plan.","intent":"Reposition the Living annotation within the floor plan.","app":"Autodesk Revit","details":"The Living note remained visible with dimensions 10'3\"X10'10\"."},{"start_s":29246.172,"end_s":29255.752,"action":"Zoomed into the dining and pooja area, selected the Living note, and dragged it near the Dining label.","intent":"Adjust the Living annotation placement.","app":"Autodesk Revit","details":"The Living note was selected and displayed as 10'3\"X10'10\"."},{"start_s":29255.752,"end_s":29264.886,"action":"Replaced the selected note title with POOJA and entered the dimensions 6'X4'2\".","intent":"Update the room annotation to identify the Pooja area and its dimensions.","app":"Autodesk Revit","details":"The note visibly changed to POOJA with 6'X4'2\"."},{"start_s":29264.886,"end_s":29275.043,"action":"Exited text editing, selected the POOJA note, and dragged it upward into the Pooja room area.","intent":"Position the updated Pooja annotation in the corresponding room.","app":"Autodesk Revit","details":"The POOJA note with 6'X4'2\" was moved above the Dining area."},{"start_s":29275.043,"end_s":29285.543,"action":"Selected another text note, dragged it below the Pooja area, and replaced its title with DINING while entering 14'6\"X11'.","intent":"Create or update the Dining room annotation with its dimensions.","app":"Autodesk Revit","details":"The edited note displayed DINING and the entered dimension string was partially selected at the end."},{"start_s":29285.543,"end_s":29294.99,"action":"Selected the DINING text note and dragged it across the floor plan, ending with the note positioned near the dining table.","intent":"Reposition the dining-room annotation.","app":"Autodesk Revit","details":"The DINING note remained selected after the drag."},{"start_s":29294.99,"end_s":29314.99,"action":"Finished dragging the DINING note, clicked the plan, and zoomed out to review a wider portion of the floor plan.","intent":"Review the annotation placement in the overall plan.","app":"Autodesk Revit","details":"The view expanded to show multiple rooms and the DINING note near the left side of the plan."},{"start_s":29314.99,"end_s":29334.99,"action":"Paused briefly, then scrolled the floor-plan view to adjust the visible area while continuing to review the layout.","intent":"Navigate and inspect the plan.","app":"Autodesk Revit","details":"No text edit or confirmed placement change was visible during the interval."},{"start_s":29334.99,"end_s":29345.162,"action":"Scrolled and panned through the floor plan, moving from the living and kitchen area toward the master toilet and dressing area, then selected the DINING note.","intent":"Navigate to and select a room annotation for adjustment.","app":"Autodesk Revit","details":"The DINING note was visible over the master-toilet/dressing area at the end."},{"start_s":29345.162,"end_s":29355.453,"action":"Entered text-edit mode, typed DRESS, and dragged the edited note within the dressing area.","intent":"Create or update the dressing-room annotation.","app":"Autodesk Revit","details":"The edited note displayed DRESS with an 8'×4'8\" dimension, overlapping the existing dressing label."},{"start_s":29355.453,"end_s":29364.71,"action":"Continued dragging the DRESS note, scrolled the view, and repositioned it into the master-toilet area near the right side.","intent":"Place the DRESS annotation in the intended room area.","app":"Autodesk Revit","details":"The DRESS 8'×4'8\" note remained selected near the right side of the master toilet."},{"start_s":29364.71,"end_s":29375.706,"action":"Dragged within the M.TOILET text note and selected the dimension text “8'X4'8” for editing.","intent":"Edit the toilet-room annotation text.","app":"Autodesk Revit","details":"Floor Plan: GL; text-note editing mode."},{"start_s":29375.706,"end_s":29386.252,"action":"Edited the selected text note, replacing its dimension with “8'X6'”, then dragged the note to reposition it over the toilet room.","intent":"Correct and reposition the M.TOILET annotation.","app":"Autodesk Revit","details":"The updated note visibly reads M.TOILET and 8'X6'."},{"start_s":29386.252,"end_s":29396.721,"action":"Exited text editing, activated aligned dimension placement, and navigated around the floor plan while selecting wall references for a dimension.","intent":"Begin placing or checking a wall dimension near the toilet area.","app":"Autodesk Revit","details":"Modify | Place Dimensions mode was visible; no completed dimension is clearly confirmed."},{"start_s":29396.721,"end_s":29403.131,"action":"Continued selecting dimension references, then exited the active placement context and zoomed out to review the broader floor plan.","intent":"Review the dimensioned toilet area in the overall plan.","app":"Autodesk Revit","details":"The view changed from a close-up of M.TOILET to a wider apartment floor-plan view."},{"start_s":29403.131,"end_s":29411.487,"action":"Panned and zoomed out further to display most of the furnished floor plan, including bedrooms, toilets, dining, drawing, kitchen, and lobby areas.","intent":"Inspect the overall layout after annotation work.","app":"Autodesk Revit","details":"The raster image underlay and room labels remained visible."},{"start_s":29411.487,"end_s":29421.377,"action":"Scrolled to zoom back toward the upper central portion of the floor plan, bringing BED ROOM-1, TOILET-1, TOILET-2, BED ROOM-2, M.TOILET, and DINING into clearer view.","intent":"Review the central room layout and updated toilet annotation.","app":"Autodesk Revit","details":"No additional edits were visible during this navigation."},{"start_s":29421.377,"end_s":29431.497,"action":"Selected the M.M toilet text note and dragged it from the lower-left bathroom toward the upper bathroom area.","intent":"Reposition the selected bathroom annotation on the floor plan.","app":"Autodesk Revit","details":"The M.M toilet note remained selected while being dragged."},{"start_s":29431.497,"end_s":29442.961,"action":"Continued dragging the text note into the right bathroom, zoomed in, selected the note, and typed “TOILET-2.”","intent":"Move and relabel the bathroom annotation for the second toilet.","app":"Autodesk Revit","details":"The right-side note was selected and the text entry ended with “TOILET-2.”"},{"start_s":29442.961,"end_s":29453.592,"action":"Opened text editing for the right bathroom note and entered the dimension text “6'8'” after correcting the entry.","intent":"Update the displayed dimensions for the Toilet-2 annotation.","app":"Autodesk Revit","details":"The note was visibly in Edit Text mode and displayed “TOILET-2” with a partial dimension value."},{"start_s":29453.592,"end_s":29466.372,"action":"Dragged and repositioned the text note, then exited and re-entered text editing; the view changed to a closer view of the two bathrooms.","intent":"Adjust the annotation placement and review the updated bathroom labels.","app":"Autodesk Revit","details":"The span ended with the M.TOILET note active in text-edit mode and a cancel-editing transition."},{"start_s":29466.372,"end_s":29476.614,"action":"Exited text editing, navigated the plan with scrolling and tabs, and reviewed the bathroom labels in a wider view.","intent":"Finish the annotation edit and inspect the resulting floor-plan labels.","app":"Autodesk Revit","details":"The view showed the two toilet rooms and their labels without an active text-edit box."},{"start_s":29476.614,"end_s":29487.157,"action":"Selected the left bathroom annotation, edited its text, and changed the displayed label to “TOILET-1” with dimensions “6'X8'.”","intent":"Relabel and dimension the first toilet annotation.","app":"Autodesk Revit","details":"The left bathroom note was active in Edit Text mode at the end of the span."},{"start_s":29487.157,"end_s":29497.276,"action":"Adjusted the Revit floor-plan view by scrolling and clicking, zooming from the full layout toward the living room, kitchen, and balcony area.","intent":"Navigate and inspect the relevant portion of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":29497.276,"end_s":29506.339,"action":"Zoomed and panned around the lower floor plan, then selected the kitchen text note labeled “KITCHEN 8'0\"X12'0\".”","intent":"Select the kitchen annotation for editing or repositioning.","app":"Autodesk Revit","details":"The selected text note is visible with text-note editing controls."},{"start_s":29506.339,"end_s":29518.109,"action":"Entered text-edit mode for the selected note, replaced its text, and typed “5'8\" WIDE BALCONY.”","intent":"Rename the selected annotation to describe the balcony width.","app":"Autodesk Revit","details":"The note is actively being edited and the replacement text is being entered."},{"start_s":29518.109,"end_s":29528.215,"action":"Continued dragging and repositioning the edited text note, zooming out and panning across the floor plan until the note was placed near the right-side utility area.","intent":"Position the balcony annotation in the desired plan location.","app":"Autodesk Revit","details":"The selected note reads “5'8\" WIDE BALCONY” and appears near the right side of the plan."},{"start_s":29528.215,"end_s":29540.125,"action":"Dragged the selected “5'8\" WIDE BALCONY” note farther right across the plan and clicked to leave it positioned near the utility area.","intent":"Finalize the annotation’s placement on the floor plan.","app":"Autodesk Revit","details":"The balcony note remains selected in the right-side open area."},{"start_s":29540.125,"end_s":29549.71,"action":"Selected a plan element near the kitchen, activated the Rotate tool, and entered an angle value of 90.","intent":"Rotate the selected kitchen-area element by a specified angle.","app":"Autodesk Revit","details":"The Rotate command is active and the angle input shows 90."},{"start_s":29549.71,"end_s":29560.101,"action":"Selected the balcony text note and entered text-edit mode, then deleted a character and clicked away.","intent":"Edit the balcony annotation text.","app":"Autodesk Revit","details":"Floor Plan GL shows the selected note reading “5'8\" WIDE BALCONY”."},{"start_s":29560.101,"end_s":29570.216,"action":"Edited the selected note by typing and backspacing, changing the visible text to “5'0\" WIDE UTILITY,” then clicked away.","intent":"Revise the annotation wording and dimension.","app":"Autodesk Revit","details":"Text editing remained active in the Revit floor plan."},{"start_s":29570.216,"end_s":29581.917,"action":"Dragged the text note from the balcony area into the utility-room area and repositioned it over the plan.","intent":"Move the revised annotation to the corresponding room.","app":"Autodesk Revit","details":"The note remained selected while being repositioned."},{"start_s":29581.917,"end_s":29592.014,"action":"Zoomed and panned the floor plan, then dragged the balcony text note toward the lower-left balcony area and selected it.","intent":"Adjust the annotation’s placement in the overall plan.","app":"Autodesk Revit","details":"The view changed from a close-up to a wider floor-plan view."},{"start_s":29592.014,"end_s":29601.879,"action":"Panned and zoomed across the floor plan, typed “TX,” and entered Place Text mode with a new text note ready to be drawn.","intent":"Navigate to another plan area and begin placing a text annotation.","app":"Autodesk Revit","details":"Revit displayed the broader lobby, bedrooms, drawing room, and utility areas."},{"start_s":29601.879,"end_s":29612.098,"action":"Clicked in the plan, pressed Escape several times, zoomed toward the lobby and drawing-room area, and dragged to begin positioning or creating text before clicking again.","intent":"Attempt to place or adjust a text annotation in the central plan area.","app":"Autodesk Revit","details":"The final view centered on the lobby, electrical room, drawing room, and adjacent bedroom."},{"start_s":29612.098,"end_s":29621.802,"action":"Selected the drawing-room text note, dragged across its text, and replaced the selection by typing “LOBBY.”","intent":"Rename the selected floor-plan text note.","app":"Autodesk Revit","details":"The floor plan remained in text-note edit mode."},{"start_s":29621.802,"end_s":29631.698,"action":"Selected the edited note and dragged it to reposition it within the lobby area, then exited text editing and zoomed or panned to a wider plan view.","intent":"Position the renamed LOBBY annotation on the floor plan.","app":"Autodesk Revit","details":null},{"start_s":29631.698,"end_s":29642.736,"action":"Panned and zoomed across the floor plan, selected the LOBBY note, and used Escape and Tab navigation while reviewing the plan.","intent":"Inspect the updated annotation and surrounding layout.","app":"Autodesk Revit","details":"The view broadened to show the lobby, bedrooms, drawing room, dining area, and kitchen."},{"start_s":29642.736,"end_s":29652.602,"action":"Selected the drawing-room text note and dragged it rightward across the plan, leaving the note selected in text-edit mode.","intent":"Reposition the drawing-room annotation.","app":"Autodesk Revit","details":"The selected note visibly moved toward the central drawing-room area."},{"start_s":29652.602,"end_s":29661.951,"action":"Panned and zoomed to the right side of the plan, then selected and dragged the “5'0 WIDE UTILITY” annotation near the kitchen.","intent":"Reposition the utility annotation on the floor plan.","app":"Autodesk Revit","details":"The view showed the dining, kitchen, bedrooms, balcony, and utility areas."},{"start_s":29661.951,"end_s":29670.972,"action":"Zoomed and panned to a wider plan view, tabbed through selectable items, then selected and dragged the kitchen annotation toward the lower-left kitchen area.","intent":"Reposition the kitchen annotation.","app":"Autodesk Revit","details":"The final view showed the complete apartment layout with the kitchen note selected."},{"start_s":29670.972,"end_s":29681.246,"action":"Dragged the selected text note across the Revit floor plan, repositioning it toward the lower-left balcony area.","intent":"Reposition the selected annotation on the floor plan.","app":"Autodesk Revit","details":"The GL floor plan remained visible with a text note selected."},{"start_s":29681.246,"end_s":29691.534,"action":"Continued dragging the selected text note across the floor plan, shifting the view and leaving the note selected near the lower portion of the plan.","intent":"Continue positioning the annotation within the floor plan.","app":"Autodesk Revit","details":"The view moved between wider and closer plan views during the drag."},{"start_s":29691.534,"end_s":29702.186,"action":"Dragged the selected text note through the plan, then clicked near the lower-right area and left the note selected around the central bedroom area.","intent":"Place the annotation at a new location on the plan.","app":"Autodesk Revit","details":"The view showed the apartment layout and the selected note near the M. bedroom region."},{"start_s":29702.186,"end_s":29710.534,"action":"Clicked around the plan and used Tab to cycle selection, then dragged a selected text note and clicked another annotation near the dining area.","intent":"Select and reposition text annotations on the floor plan.","app":"Autodesk Revit","details":"Revit remained in Modify | Text Notes mode."},{"start_s":29710.534,"end_s":29718.282,"action":"Pressed Tab to cycle selection, clicked the upper-left apartment area, dragged the selected note, and clicked near the right-side pool area.","intent":"Move between and adjust text-note selections in the plan.","app":"Autodesk Revit","details":"The floor plan remained at the same general zoom with selected text notes visible."},{"start_s":29718.282,"end_s":29730.985,"action":"Pressed Tab repeatedly to cycle through selectable text notes, ending with a note selected near the right-side pool and bedroom area.","intent":"Cycle through text-note elements for further editing or positioning.","app":"Autodesk Revit","details":"No text content change was visible; the GL floor plan stayed open."},{"start_s":29730.985,"end_s":29740.964,"action":"Exited the active text interaction, navigated among text-note controls, and dragged across the floor plan; selected a text note near Toilet-2.","intent":"Select and prepare a floor-plan text note for editing.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible; the selected note showed text type 1.5MM."},{"start_s":29740.964,"end_s":29750.513,"action":"Zoomed into the right side of the floor plan and selected the Toilet-2 annotation.","intent":"Inspect and focus the Toilet-2 room label.","app":"Autodesk Revit","details":"The view zoomed to the Toilet-2 area, with the text note selected."},{"start_s":29750.513,"end_s":29759.57,"action":"Dragged the selected Toilet-2 text note and entered text-edit mode; deleted existing characters and typed a revised dimension ending in 6×8.","intent":"Edit the Toilet-2 room annotation dimensions.","app":"Autodesk Revit","details":"The in-place editor visibly showed “TOILET-2” and “6X8” while the surrounding plan label remained visible."},{"start_s":29759.57,"end_s":29769.963,"action":"Completed the Toilet-2 note edit by entering 8'6\"×5'; exited the text edit view and zoomed back out across the floor plan.","intent":"Set the Toilet-2 annotation to the revised dimensions and review its placement.","app":"Autodesk Revit","details":"The edited note displayed “TOILET-2 8'6\"X5'” before the view returned to a wider plan."},{"start_s":29769.963,"end_s":29780.596,"action":"Zoomed and selected the Kitchen annotation, then edited its dimension text from 8'0\"×12'0\" to 9'0\"×12'0\".","intent":"Revise the Kitchen room annotation dimensions.","app":"Autodesk Revit","details":"The selected Kitchen note visibly displayed “KITCHEN 9'0\"X12'0\"” in the text editor."},{"start_s":29780.596,"end_s":29790.62,"action":"Finished the Kitchen note edit, navigated across the plan, and selected the Dining annotation; entered or displayed the revised Dining dimensions 14'6\"×11'.","intent":"Continue updating room dimension annotations on the floor plan.","app":"Autodesk Revit","details":"The final view showed the Dining text note selected with “DINING 14'6\"X11'” beside the existing dining label."},{"start_s":29790.62,"end_s":29800.597,"action":"Edited the selected dining-room text note by deleting and entering dimension text, then zoomed or panned the floor plan while keeping the note in text-edit mode.","intent":"Update the dining-room annotation dimensions.","app":"Autodesk Revit","details":"The visible note reads DINING with an edited dimension beginning 11'0\"x15'."},{"start_s":29800.597,"end_s":29810.524,"action":"Selected and repositioned the dining text note, then selected the POOJA note and adjusted its position on the floor plan.","intent":"Arrange room-label annotations on the plan.","app":"Autodesk Revit","details":"The dining and POOJA labels remained selected during dragging and view navigation."},{"start_s":29810.524,"end_s":29820.691,"action":"Edited the POOJA note dimensions, dragged the note into position, and zoomed out to review its placement within the floor plan.","intent":"Correct and place the POOJA room annotation.","app":"Autodesk Revit","details":"The edited POOJA label shows a dimension beginning 6' x 3'8\"."},{"start_s":29820.691,"end_s":29830.688,"action":"Navigated to the drawing-room area, selected the drawing-room text note, and edited its dimension text from 13'10\"x11' to 12'0\"x11'.","intent":"Correct the drawing-room annotation dimensions.","app":"Autodesk Revit","details":"The final visible note reads DRAWING 12'0\"x11'."},{"start_s":29830.688,"end_s":29840.494,"action":"Edited the drawing-room note again to enter the longer room dimensions, then dragged the selected annotation and reviewed its placement in the drawing-room area.","intent":"Update and position the drawing-room annotation.","app":"Autodesk Revit","details":"The visible selected note reads DRAWING 12'0\"x15'6\"."},{"start_s":29840.494,"end_s":29851.057,"action":"Navigated to the master-bedroom area, selected the room note, and edited its displayed dimensions to 13'x12'.","intent":"Correct the master-bedroom annotation dimensions.","app":"Autodesk Revit","details":"The final visible note reads M.BED ROOM 13'X12'."},{"start_s":29851.057,"end_s":29860.463,"action":"Entered text characters, dragged across the floor plan, scrolled, and resized the Revit window; the view shifted from the bedroom area toward the toilet and balcony.","intent":"Adjust the plan view and interact with an annotation or raster image.","app":"Autodesk Revit","details":"The raster image became selected after the window resize."},{"start_s":29860.463,"end_s":29869.927,"action":"Clicked and tabbed through the balcony annotation, then entered text-edit mode with “5'8\" WIDE BALCONY” selected.","intent":"Edit the balcony text note.","app":"Autodesk Revit","details":"The selected note is visibly in Edit Text mode."},{"start_s":29869.927,"end_s":29879.845,"action":"Edited the balcony note with backspace and numeric input, then exited text editing and zoomed or panned out to a wider floor-plan view.","intent":"Modify the balcony annotation and review its placement in the plan.","app":"Autodesk Revit","details":"The wider view shows the dining area, bedroom, toilet, and balcony."},{"start_s":29879.845,"end_s":29889.048,"action":"Dragged across the floor plan to reposition the view, clicked an annotation near the upper-right bedroom, and tabbed to another text note.","intent":"Navigate the plan and select a different room annotation.","app":"Autodesk Revit","details":"The view remains zoomed out over the 3BHK floor plan."},{"start_s":29889.048,"end_s":29898.842,"action":"Tabbed and dragged to select a text note, then zoomed into the toilet area and entered text editing on “TOILET-2 8'6\"X5'.”","intent":"Select and edit the Toilet-2 annotation.","app":"Autodesk Revit","details":"The final view is tightly zoomed on the toilet annotations."},{"start_s":29898.842,"end_s":29909.201,"action":"Dragged within the toilet annotation, clicked through text controls, and edited the note text with backspace and numeric input; the displayed edit overlay changed from “TOILET-2 8'6\"X5'” to “TOILET-1 6'6\"X5'.”","intent":"Replace the selected toilet annotation text and dimensions.","app":"Autodesk Revit","details":"Revit remains in Edit Text mode with the updated Toilet-1 note visible."},{"start_s":29909.201,"end_s":29918.863,"action":"Edited the selected Revit text note, correcting the displayed toilet dimensions and leaving the note selected on the floor plan.","intent":"Correct the toilet room annotation dimensions.","app":"Autodesk Revit","details":"The note visibly reads TOILET-1 and 6'8\"X7'6\" after editing."},{"start_s":29918.863,"end_s":29928.255,"action":"Edited the toilet note again, dragged its text placement, then exited the edit and returned to the wider floor-plan view.","intent":"Refine the annotation content and position.","app":"Autodesk Revit","details":"The resulting floor plan shows the toilet note as 6'0\"X7'6\"."},{"start_s":29928.255,"end_s":29938.589,"action":"Viewed the wider ground-level floor plan and clicked the ribbon and view area without a clearly visible model change.","intent":"Inspect the floor plan and access room-related tools.","app":"Autodesk Revit","details":"The plan remains visible with the 1858 Sft. label and room annotations."},{"start_s":29938.589,"end_s":29947.796,"action":"Activated room-tag placement, adjusted the view scale, and left Revit in Place Room mode over the floor plan.","intent":"Prepare to place or tag a room on the plan.","app":"Autodesk Revit","details":"The contextual ribbon shows Modify | Place Room and the status prompt indicates clicking to place a room."},{"start_s":29947.796,"end_s":29959.64,"action":"Scrolled the floor plan while remaining in Place Room mode and positioned the placement cursor over the lower bedroom area.","intent":"Navigate to a room location for placement.","app":"Autodesk Revit","details":"No room placement result is visibly confirmed."},{"start_s":29959.64,"end_s":29974.98,"action":"Scrolled and navigated to another portion of the floor plan, then exited room placement and selected an existing room tag in the bedroom.","intent":"Inspect and select an existing room annotation.","app":"Autodesk Revit","details":"The selected tag displays BED ROOM with area 189.0 SF; the ribbon is in Modify | Room Tags."},{"start_s":29974.98,"end_s":29982.589,"action":"Reviewed the Type Properties dialog for the room tag family and clicked the dialog controls, returning to the floor plan with the dialog still visible.","intent":"Inspect or confirm room tag type properties.","app":"Autodesk Revit","details":"Family: Anno_Tag_Room_Medium; type: Name Number w Both Areas."},{"start_s":29982.589,"end_s":29988.959,"action":"Closed or dismissed the type-properties interaction and worked on the selected room tag in the floor plan; Revit then displayed a Warning dialog.","intent":"Modify or remove the selected room tag.","app":"Autodesk Revit","details":"The floor plan shows the selected tag in the master bedroom."},{"start_s":29988.959,"end_s":30004.806,"action":"Dismissed the warning, zoomed out and navigated across the floor plan, then clicked in the view; Revit warned that a room tag was deleted while its corresponding room still existed.","intent":"Review the plan and respond to the room-tag deletion warning.","app":"Autodesk Revit","details":"Warning stated that the room tag was deleted but the corresponding room still exists."},{"start_s":30004.806,"end_s":30009.493,"action":"Opened the Choose Space Type and Color Scheme dialog and changed the selections from Spaces/Schema 1 to Rooms/By Department.","intent":"Configure the color-fill legend category and scheme.","app":"Autodesk Revit","details":"Dialog remained open with Space Type set to Rooms and Color Scheme set to By Department."},{"start_s":30009.493,"end_s":30028.116,"action":"Returned to the floor plan, zoomed and panned to the legend area, then initiated editing of the color scheme.","intent":"Locate and edit the room color-fill legend.","app":"Autodesk Revit","details":"The view shows a By Room Name Legend and the Properties panel shows Color Scheme: By Room Name."},{"start_s":30028.116,"end_s":30039.695,"action":"Used the Edit Color Scheme dialog controls to switch among room schemes, ending on By Room Name; the dialog displayed the Room entry and its color swatch.","intent":"Inspect or select the room color scheme for the legend.","app":"Autodesk Revit","details":"Category was Rooms; By Room Name was selected, with one visible Room value using a solid fill."},{"start_s":30039.695,"end_s":30047.738,"action":"Switched to Autodesk Revit and zoomed out on the GL floor plan, then clicked within the drawing area while the view changed scale.","intent":"Review the overall floor plan and legend.","app":"Autodesk Revit","details":"The GL floor plan and By Room Name Legend remained visible."},{"start_s":30047.738,"end_s":30057.782,"action":"Scrolled and zoomed into the GL floor plan, bringing the central and lower apartment areas into closer view, then clicked the drawing.","intent":"Inspect floor-plan details.","app":"Autodesk Revit","details":"The raster floor-plan image and room labels were visible."},{"start_s":30057.782,"end_s":30068.21,"action":"Zoomed into the apartment rooms, selected a text note near the bedroom area, and dragged it to a new position before clicking another note.","intent":"Reposition room annotation text.","app":"Autodesk Revit","details":"A text note in the bedroom area became selected and the view ended with Text Notes editing active."},{"start_s":30068.21,"end_s":30077.835,"action":"Opened text editing for the selected bedroom note, deleted and entered characters including '-1' and '2', and clicked within the note to continue editing.","intent":"Correct the bedroom annotation text.","app":"Autodesk Revit","details":"The edited note displayed BED ROOM-1 with a dimension line beneath it."},{"start_s":30077.835,"end_s":30087.689,"action":"Deleted and retyped portions of the bedroom note, dragged the selected text note upward, then zoomed and navigated to another bedroom area.","intent":"Adjust and reposition room labels on the floor plan.","app":"Autodesk Revit","details":"The view ended on Bedroom 2 with a selected M.BED ROOM note showing 13'X12'2\"."},{"start_s":30087.689,"end_s":30097.554,"action":"Edited the Bedroom 2 note by typing and deleting characters, then dragged the text note and removed additional characters.","intent":"Correct the Bedroom 2 annotation text.","app":"Autodesk Revit","details":"The note remained in text-edit mode and visibly displayed M.BED ROOM with 13'X12'2\" beneath it."},{"start_s":30097.554,"end_s":30109.819,"action":"Edited the Bed Room-2 text note by clicking into its text and typing replacement characters and dimensions; left the note in text-edit mode showing partial updated content.","intent":"Update the Bed Room-2 label and dimensions.","app":"Autodesk Revit","details":"Floor Plan: GL; text note editing was active."},{"start_s":30109.819,"end_s":30119.775,"action":"Selected the Bed Room-2 text note, dragged it to a new position, and zoomed out to review the full floor plan.","intent":"Reposition and review the Bed Room-2 annotation.","app":"Autodesk Revit","details":"The note remained selected after repositioning."},{"start_s":30119.775,"end_s":30130.184,"action":"Exited the note edit state, navigated around the floor plan, and selected the Toilet-2 room annotation near the center-right bathroom area.","intent":"Select a room annotation for further editing or inspection.","app":"Autodesk Revit","details":"The view ended with Toilet-2 highlighted on the floor plan."},{"start_s":30130.184,"end_s":30141.686,"action":"Zoomed into the bathroom area, selected the M. Toilet text note, and entered text-edit mode to type the replacement label “M.TOILET.”","intent":"Rename the bathroom annotation.","app":"Autodesk Revit","details":"The close view showed Toilet-2 above the M. Toilet room."},{"start_s":30141.686,"end_s":30152.257,"action":"Continued editing the selected bathroom note, changing its displayed label and dimension text to “M.TOILET” with “8'6\"X5'.”","intent":"Update the M. Toilet room label and dimensions.","app":"Autodesk Revit","details":"The note remained in text-edit mode with the dimension text selected or being replaced."},{"start_s":30152.257,"end_s":30166.182,"action":"Exited text editing, zoomed out and panned across the floor plan, then zoomed farther out to review multiple apartment layouts and the area schedule.","intent":"Review the updated plan annotations in the broader drawing context.","app":"Autodesk Revit","details":"The final view showed several floor-plan units and the Block-A first-floor table."},{"start_s":30166.182,"end_s":30172.58,"action":"Switched to the Revit window, then middle-clicked and scrolled the GL floor plan to reposition the view.","intent":"Navigate the floor plan for inspection.","app":"Autodesk Revit","details":"Displayed the GL floor plan in PROJECT 11."},{"start_s":30172.58,"end_s":30185.799,"action":"Scrolled repeatedly through the GL floor plan and middle-clicked to adjust the view, ending on a broader view of the central lobby and surrounding apartments.","intent":"Inspect different areas of the floor plan.","app":"Autodesk Revit","details":"No model elements were visibly edited."},{"start_s":30185.799,"end_s":30195.277,"action":"Middle-clicked and performed repeated scrolls to zoom and reposition around the central lobby, stairs, elevators, and adjacent 3BHK apartment areas.","intent":"Review the central floor-plan layout.","app":"Autodesk Revit","details":"The view shifted between closer and broader plan areas."},{"start_s":30195.277,"end_s":30205.138,"action":"Middle-clicked and scrolled through the plan, moving from the lobby and stair core toward the lower apartment area and the floor-area table.","intent":"Continue inspecting the floor plan and associated schedule.","app":"Autodesk Revit","details":"The visible schedule was labeled BLOCK-A: FIRST FLOOR."},{"start_s":30205.138,"end_s":30215.326,"action":"Scrolled and clicked within the lower plan area, then selected a text note and dragged it; pressed Escape and Tab while the text-note editing context remained active.","intent":"Select and reposition an annotation on the floor plan.","app":"Autodesk Revit","details":"Revit showed the Modify | Text Notes contextual ribbon and a selected text note."},{"start_s":30215.326,"end_s":30226.037,"action":"Clicked and dragged the selected text note across the floor plan, moving its position while remaining in text-note modification mode.","intent":"Adjust the placement of the floor-plan annotation.","app":"Autodesk Revit","details":"The selected annotation remained highlighted during the drag operations."},{"start_s":30226.037,"end_s":30236.233,"action":"Selected and repositioned a text note on the GL floor plan, then tabbed through note-edit controls and clicked another note area.","intent":"Adjust text-note placement or selection on the floor plan.","app":"Autodesk Revit","details":"Text Notes mode remained active; the plan view stayed visible."},{"start_s":30236.233,"end_s":30246.12,"action":"Dragged across the floor plan, clicked near the lower-right apartment, exited the active note interaction with Escape, and tabbed through controls; the view then zoomed into the apartment area.","intent":"Inspect or reposition an annotation in the lower-right apartment.","app":"Autodesk Revit","details":"The resulting view shows a closer floor-plan view with rooms, labels, and the balcony."},{"start_s":30246.12,"end_s":30255.461,"action":"Scrolled and dragged across the drawing while continuing to work with the text-note selection, shifting the displayed floor plan without changing the project view.","intent":"Navigate the floor plan and position the active annotation.","app":"Autodesk Revit","details":"The view ended on a broader floor-plan overview with the active text-note context still visible."},{"start_s":30255.461,"end_s":30265.601,"action":"Continued dragging across the floor plan, clicked the upper-right apartment region, dismissed the active interaction with Escape, and tabbed through controls.","intent":"Inspect or select another annotation in the upper-right apartment.","app":"Autodesk Revit","details":"The floor plan remained broadly zoomed out; no confirmed text change was visible."},{"start_s":30265.601,"end_s":30275.894,"action":"Tabbed through controls and scrolled, then clicked and dragged in the lower portion of the plan; the view zoomed farther out and a plumbing element became selected.","intent":"Navigate the plan and select an element near the lower apartment area.","app":"Autodesk Revit","details":"The status bar identified the selected element as a plumbing fixture grab rail."},{"start_s":30275.894,"end_s":30286.07,"action":"Dragged to navigate and zoom into the apartment, then selected the bedroom text note, leaving its blue bounding box and handles visible.","intent":"Zoom in and select the bedroom annotation for editing or repositioning.","app":"Autodesk Revit","details":"The final view closely framed the master bedroom and adjacent toilet, with the selected note reading “M BED ROOM.”"},{"start_s":30286.07,"end_s":30296.179,"action":"Selected the M.BED ROOM text note and dragged across its contents to select the existing room label for editing.","intent":"Prepare the bedroom annotation for text replacement.","app":"Autodesk Revit","details":"Text note editing was active on the GL floor plan."},{"start_s":30296.179,"end_s":30303.847,"action":"Replaced the selected note text with “M.BED ROOM” and “14'X13'6”, then zoomed out to review the updated annotation in the floor plan.","intent":"Update the bedroom label to match the displayed room dimensions.","app":"Autodesk Revit","details":"The edited note visibly reads M.BED ROOM and 14'X13'6\"."},{"start_s":30303.847,"end_s":30317.277,"action":"Scrolled and navigated the floor plan, zooming back toward the bedroom area for inspection.","intent":"Review the updated room annotation and its placement.","app":"Autodesk Revit","details":"The view moved from a broader plan view to a closer bedroom view."},{"start_s":30317.277,"end_s":30327.422,"action":"Zoomed further into the bedroom annotation and attempted to exit or change the active editing state using keyboard commands and clicks.","intent":"Inspect the overlapping room labels and manage the active annotation selection.","app":"Autodesk Revit","details":"The close view showed overlapping M.BED ROOM labels and dimensions."},{"start_s":30327.422,"end_s":30336.895,"action":"Selected the M.BED ROOM text note and dragged across its text, leaving the label contents highlighted for editing.","intent":"Select the bedroom note text for another adjustment.","app":"Autodesk Revit","details":"The selected note displayed M.BED ROOM and 14'X13'6\" above the original room label."},{"start_s":30336.895,"end_s":30346.978,"action":"Navigated to the drawing-room area, selected the DRAWING text note, and dragged across its contents to enter text editing.","intent":"Prepare the drawing-room annotation for modification.","app":"Autodesk Revit","details":"The selected note reads DRAWING and 12'0\"X15'6\"; the underlying room label reads 14'6\" x 11'0\"."},{"start_s":30346.978,"end_s":30356.573,"action":"Selected the living-room text note, edited its displayed characters, and dragged the note to reposition it on the floor plan.","intent":"Edit and reposition the living-room annotation.","app":"Autodesk Revit","details":"The note visibly includes “DRAWING” and dimension text."},{"start_s":30356.573,"end_s":30366.588,"action":"Exited text-note editing, zoomed and panned across the floor plan, and selected the BED ROOM-1 note.","intent":"Navigate the plan and select another room annotation.","app":"Autodesk Revit","details":"The view changed from the drawing/dining area to a broader plan view and then toward the upper bedrooms."},{"start_s":30366.588,"end_s":30378.46,"action":"Dragged the selected BED ROOM-1 note across the plan and panned the view while keeping the annotation selected.","intent":"Reposition the BED ROOM-1 annotation.","app":"Autodesk Revit","details":"The selected note moved from the upper-left bedroom area toward the upper-right bedroom area."},{"start_s":30378.46,"end_s":30388.808,"action":"Zoomed into the bedroom and bathroom area, selected the BED ROOM-1 note, entered text editing, and pressed Backspace repeatedly.","intent":"Edit the BED ROOM-1 annotation text.","app":"Autodesk Revit","details":"The note initially displayed “BED ROOM-1 12'X11'”; the visible editing state followed deletion keystrokes."},{"start_s":30388.808,"end_s":30408.808,"action":"Typed “10'” into the active BED ROOM-1 text note.","intent":"Replace or revise the room dimension text.","app":"Autodesk Revit","details":"The note visibly changed to show “BED ROOM-1” with “10'” beneath it."},{"start_s":30408.808,"end_s":30416.931,"action":"Typed “X” into the active BED ROOM-1 text note.","intent":"Continue entering the room dimension annotation.","app":"Autodesk Revit","details":"The note remained in text-edit mode with the partial dimension visible."},{"start_s":30416.931,"end_s":30426.925,"action":"Entered `12'` in the active Revit text note, then clicked and dragged the Bed Room-1 note area.","intent":"Edit the room annotation text and reposition or select the note.","app":"Autodesk Revit","details":"Bed Room-1 note remained visible and selected after the interaction."},{"start_s":30426.925,"end_s":30436.336,"action":"Dragged within the Bed Room-1 annotation, edited its text by deleting a character and entering `2`, then clicked the Bed Room-2 annotation.","intent":"Modify the room label text and move focus to the next room annotation.","app":"Autodesk Revit","details":"The selected note changed to display Bed Room-2 with `10'X12'`."},{"start_s":30436.336,"end_s":30446.085,"action":"Selected and dragged the Bed Room-2 note, then clicked the lower Bed Room-2 label area.","intent":"Reposition or adjust overlapping room annotations on the floor plan.","app":"Autodesk Revit","details":"The upper Bed Room-2 note stayed selected while the lower label became active."},{"start_s":30446.085,"end_s":30456.534,"action":"Scrolled and clicked through the floor plan, then selected the M. Toilet annotation and dragged it to a new position while the view shifted and the window was resized.","intent":"Reposition the master toilet annotation for clearer placement.","app":"Autodesk Revit","details":"The view centered on Toilet-1 and the M. Toilet note was selected."},{"start_s":30456.534,"end_s":30466.63,"action":"Clicked the M. Toilet note, entered text-edit mode, and used backspace to remove characters from its label.","intent":"Edit the master toilet room annotation text.","app":"Autodesk Revit","details":"The note was left showing a shortened label beginning with `M` and the dimension `6'X8'6\"`."},{"start_s":30466.63,"end_s":30477.301,"action":"Typed `TOILET-1` into the active master toilet annotation.","intent":"Replace the shortened room label with the intended toilet identifier.","app":"Autodesk Revit","details":"The note displayed `TOILET-1` above `6'X8'6\"`."},{"start_s":30477.301,"end_s":30489.456,"action":"Edited the selected TOILET-1 text note by deleting existing characters and entering the beginning of a dimension label.","intent":"Update the TOILET-1 annotation text.","app":"Autodesk Revit","details":"The note remained in text-edit mode."},{"start_s":30489.456,"end_s":30499.318,"action":"Completed the TOILET-1 note text as “5'X8'2\"” and clicked within the note area.","intent":"Enter the toilet room dimensions in the annotation.","app":"Autodesk Revit","details":"The visible note reads TOILET-1 and 5'X8'2\"."},{"start_s":30499.318,"end_s":30510.668,"action":"Selected and dragged the TOILET-1 text note, then scrolled the floor plan view to reposition the visible layout.","intent":"Adjust the annotation placement and inspect the surrounding plan.","app":"Autodesk Revit","details":"The note was selected with its bounding box visible; the view later showed a wider portion of the floor plan."},{"start_s":30510.668,"end_s":30520.542,"action":"Clicked around the floor plan and selected the BED ROOM-1 raster/text annotation, with several view or window adjustments and escape actions.","intent":"Switch focus from the toilet note to the bedroom annotation.","app":"Autodesk Revit","details":"The BED ROOM-1 label became selected in the raster image view."},{"start_s":30520.542,"end_s":30529.882,"action":"Opened text editing for the BED ROOM-1 annotation, deleted part of its dimension text, and entered a replacement beginning with “0”.","intent":"Revise the BED ROOM-1 dimension label.","app":"Autodesk Revit","details":"The visible edited note reads BED ROOM-1 with a partial dimension line beginning “12'”."},{"start_s":30529.882,"end_s":30540.022,"action":"Completed the BED ROOM-1 dimension text as “12'”, then selected and dragged the bedroom annotation while scrolling and repositioning the floor plan.","intent":"Update and reposition the bedroom annotation.","app":"Autodesk Revit","details":"The final view showed the selected BED ROOM-1 label reading 10'X12' near the bedroom."},{"start_s":30540.022,"end_s":30548.446,"action":"Navigated and adjusted the Revit floor-plan view, then selected the Toilet-1 text note and began dragging it.","intent":"Reposition the Toilet-1 annotation on the floor plan.","app":"Autodesk Revit","details":"The Toilet-1 note became selected with its bounding box visible."},{"start_s":30548.446,"end_s":30557.451,"action":"Dragged the selected Toilet-1 text note across the plan toward the Toilet-2 room, then zoomed and left the note selected in its new position.","intent":"Place the Toilet-1 annotation in the desired room area.","app":"Autodesk Revit","details":"The note appears over the lower portion of the Toilet-2 room."},{"start_s":30557.451,"end_s":30567.633,"action":"Edited the selected text note with backspaces and undo commands, leaving text-edit mode active.","intent":"Correct or revise the text content of the selected note.","app":"Autodesk Revit","details":"The edit overlay shows the note text as TOILET-1 5'X8'2\"."},{"start_s":30567.633,"end_s":30577.59,"action":"Continued editing the note, removed or restored characters, and clicked within the text editor while keeping the enlarged note visible.","intent":"Refine the displayed text formatting or content.","app":"Autodesk Revit","details":"The enlarged note reads TOILET-1 on the first line and 5'X8'2\" on the second line."},{"start_s":30577.59,"end_s":30587.687,"action":"Edited the note text to change its label from Toilet-1 to Toilet-2 and adjusted the view, leaving the enlarged Toilet-2 note visible.","intent":"Update the annotation to identify the second toilet room.","app":"Autodesk Revit","details":"The text editor visibly shows TOILET-2 and 5'X8'2\"."},{"start_s":30587.687,"end_s":30596.672,"action":"Exited text editing, opened the confirmation dialog, and clicked through it; returned to the floor plan with the Toilet-2 note selected.","intent":"Finish or cancel the text-note edit and return to plan editing.","app":"Autodesk Revit","details":"A 'Cancel Editing Text' dialog asked whether to keep changes before the note was shown selected on the plan."},{"start_s":30596.672,"end_s":30605.802,"action":"Clicked into the Toilet-2 text note, edited its contents, and moved the note near the right side of the bathroom plan.","intent":"Adjust the Toilet-2 annotation text and placement.","app":"Autodesk Revit","details":"Floor Plan: GL; text note editing was active."},{"start_s":30605.802,"end_s":30616.348,"action":"Selected and dragged the Toilet-2 text note, then panned or zoomed the floor plan away from the bathroom toward the dining area.","intent":"Reposition the bathroom annotation and navigate to another plan area.","app":"Autodesk Revit","details":"The view ended on the dining area with the DRAWING annotation visible."},{"start_s":30616.348,"end_s":30627.182,"action":"Navigated to the dining area, selected the DINING text note, and dragged it to the right of the dining table.","intent":"Reposition the dining-room annotation.","app":"Autodesk Revit","details":"The DINING note remained selected near the right side of the room."},{"start_s":30627.182,"end_s":30637.368,"action":"Opened the DINING note for text editing, selected its existing dimensions, and began replacing them by typing 14'.","intent":"Correct the dimensions shown in the DINING annotation.","app":"Autodesk Revit","details":"The note displayed DINING with the replacement text in progress."},{"start_s":30637.368,"end_s":30646.531,"action":"Continued editing the DINING note, entering 6\", then X11', and left the updated text in the note.","intent":"Complete the DINING room dimension correction.","app":"Autodesk Revit","details":"The text editor showed DINING and 14'6\"X11'."},{"start_s":30646.531,"end_s":30655.154,"action":"Selected the updated DINING note and dragged it slightly to adjust its position beside the dining table.","intent":"Fine-tune placement of the corrected dining annotation.","app":"Autodesk Revit","details":"The DINING 14'6\"X11' note remained selected after repositioning."},{"start_s":30655.154,"end_s":30665.131,"action":"Selected and repositioned the dining text note, then zoomed out to view more of the floor plan.","intent":"Adjust the dining annotation placement and inspect its position in the plan.","app":"Autodesk Revit","details":null},{"start_s":30665.131,"end_s":30672.968,"action":"Selected the raster image and then selected the balcony text note, leaving the balcony annotation active.","intent":"Choose the balcony annotation for editing or repositioning.","app":"Autodesk Revit","details":null},{"start_s":30672.968,"end_s":30681.83,"action":"Edited the balcony note text by deleting characters and inserting a space, changing it to read “5' WIDE BALCONY.”","intent":"Correct the balcony annotation text.","app":"Autodesk Revit","details":null},{"start_s":30681.83,"end_s":30692.27,"action":"Dragged the balcony text note to a new position and zoomed out, leaving the annotation selected on the wider floor plan.","intent":"Reposition the corrected balcony label and review its placement.","app":"Autodesk Revit","details":null},{"start_s":30692.27,"end_s":30702.205,"action":"Zoomed and panned to the kitchen area, selected the kitchen text note, and entered text-edit mode with the dimension text active.","intent":"Prepare the kitchen annotation for correction.","app":"Autodesk Revit","details":null},{"start_s":30702.205,"end_s":30711.8,"action":"Edited the kitchen note by entering “12' X 8',” leaving the updated kitchen annotation selected.","intent":"Correct the kitchen dimensions in the floor-plan annotation.","app":"Autodesk Revit","details":null},{"start_s":30711.8,"end_s":30721.777,"action":"Dragged and scrolled within the Revit floor plan, zooming out from the kitchen area to reveal most of the apartment layout while keeping a text note selected.","intent":"Review the floor plan at different zoom levels.","app":"Autodesk Revit","details":"Selected kitchen text note remained visible."},{"start_s":30721.777,"end_s":30732.921,"action":"Clicked and dragged across the upper and central floor plan, zooming and repositioning the view around the bedrooms, toilets, dining, and kitchen areas; selected the TOILET-1 text note.","intent":"Reposition the plan and select a room text note.","app":"Autodesk Revit","details":"TOILET-1 text note was selected in the floor plan."},{"start_s":30732.921,"end_s":30743.482,"action":"Zoomed and panned toward the lower-right portion of the plan, then clicked and dragged the TOILET-1 note near the master bedroom and kitchen.","intent":"Adjust the view and position the toilet annotation.","app":"Autodesk Revit","details":"TOILET-1 note remained selected near the master bedroom."},{"start_s":30743.482,"end_s":30753.717,"action":"Zoomed further into the master toilet and kitchen area, dragged the selected TOILET-1 text note, and clicked repeatedly near the lower-right plan area.","intent":"Refine the text note placement in the bathroom area.","app":"Autodesk Revit","details":"The view ended tightly focused on the toilet, kitchen, and utility rooms."},{"start_s":30753.717,"end_s":30765.454,"action":"Clicked and dragged the toilet annotation, then entered text-edit mode and deleted two characters from the note.","intent":"Edit the toilet room annotation text.","app":"Autodesk Revit","details":"Text-edit mode was active for the TOILET-1 note."},{"start_s":30765.454,"end_s":30775.315,"action":"Typed into the selected toilet annotation, changing its label to begin with “M.” and entering “5'” in the dimension text.","intent":"Rename and update the toilet annotation.","app":"Autodesk Revit","details":"The note displayed “M.TOILET” with the dimension text selected during editing."},{"start_s":30775.315,"end_s":30783.991,"action":"Entered additional dimension characters into the selected M. Toilet text note, including 6, an inch mark, and X.","intent":"Continue editing the toilet-room dimension label.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with the M. Toilet note in text-edit mode."},{"start_s":30783.991,"end_s":30794.928,"action":"Typed the remaining room-dimension characters, then clicked and dragged in the plan to finish editing and select the toilet text notes.","intent":"Complete and position the M. Toilet dimension annotation.","app":"Autodesk Revit","details":"The visible note reads approximately 5'6\"X8'6\"; both toilet notes became selected near the end of the span."},{"start_s":30794.928,"end_s":30805.881,"action":"Navigated and zoomed the floor plan, selected the utility text note, and rotated it from a vertical orientation to horizontal.","intent":"Reorient the utility-room label for clearer placement.","app":"Autodesk Revit","details":"The selected note displays “5'0\" WIDE UTILITY” horizontally in the utility area."},{"start_s":30805.881,"end_s":30815.744,"action":"Dragged the utility text note into position, then zoomed and panned out across the floor plan while reviewing its placement.","intent":"Position and inspect the utility annotation within the plan.","app":"Autodesk Revit","details":"The utility label remained selected and was shown over the utility room during the navigation."},{"start_s":30815.744,"end_s":30825.911,"action":"Zoomed and panned across the rasterized floor plan, moving from the local utility area to a broader multi-unit view and then toward another unit.","intent":"Review the annotated plan at different scales and locations.","app":"Autodesk Revit","details":"The view changed from a close plan to a broad overview, with raster image selection and window resizing visible near the end."},{"start_s":30825.911,"end_s":30838.132,"action":"Tabbed and dragged across the plan, then clicked a bedroom text note to select it while keeping the multi-unit floor-plan view visible.","intent":"Select and inspect another room label in the floor plan.","app":"Autodesk Revit","details":"A bedroom text note near the lower unit was selected; no text change is visible."},{"start_s":30838.132,"end_s":30857.142,"action":"Adjusted the Revit floor-plan view with clicks, dragging, tab navigation, and window resizing; ended with the raster-image floor plan visible and a small plan element highlighted.","intent":"Manipulate and inspect the floor-plan view.","app":"Autodesk Revit","details":"The interval ended at a Revit window titled Project Not Saved Recently."},{"start_s":30857.142,"end_s":30866.771,"action":"Returned to the GL floor plan, scrolled and repositioned the view, then selected a furniture element in the drawing area.","intent":"Inspect and select an element in the floor plan.","app":"Autodesk Revit","details":"The view zoomed into the 3BHK apartment area, with furniture highlighted in blue."},{"start_s":30866.771,"end_s":30877.662,"action":"Selected and dragged a text note or annotation in the GL floor plan, then clicked around nearby rooms and left the note-editing context active.","intent":"Reposition or inspect floor-plan text annotations.","app":"Autodesk Revit","details":"Revit showed Modify | Text Notes and a selected annotation near the bedroom/living area."},{"start_s":30877.662,"end_s":30887.573,"action":"Dragged the selected text note to a new position, clicked another annotation, and scrolled the floor plan upward to inspect the adjacent upper apartment area.","intent":"Reposition and review text annotations on the plan.","app":"Autodesk Revit","details":"A text note remained selected near the upper bedroom area."},{"start_s":30887.573,"end_s":30897.9,"action":"Used tab navigation, clicked and dragged the selected drawing-room text note, and scrolled and panned to reposition it near the upper bedrooms and corridor.","intent":"Adjust the placement of a room label.","app":"Autodesk Revit","details":"The selected note moved from the drawing room toward the upper central area of the plan."},{"start_s":30897.9,"end_s":30907.384,"action":"Scrolled and panned across the floor plan, then dragged the selected drawing-room text note while moving the view to show multiple adjacent apartments.","intent":"Continue positioning and reviewing the room annotation.","app":"Autodesk Revit","details":"The final view showed several apartment units with the drawing-room note still selected."},{"start_s":30907.384,"end_s":30917.242,"action":"Dragged and scrolled across the Revit floor-plan raster image, then selected the DINING text note and adjusted the view until the note was shown in close-up.","intent":"Inspect and reposition a floor-plan annotation.","app":"Autodesk Revit","details":"The DINING note is selected in the close-up view."},{"start_s":30917.242,"end_s":30925.52,"action":"Zoomed out, dragged the selected text note to a new position on the floor plan, and clicked away to leave the note repositioned.","intent":"Reposition a text annotation on the plan.","app":"Autodesk Revit","details":"The full floor plan is visible with the text note selected or recently moved near the upper-right area."},{"start_s":30925.52,"end_s":30935.298,"action":"Scrolled and panned to another portion of the floor plan, selected a raster-image area, and adjusted the view around the bedroom and dining rooms.","intent":"Navigate and inspect another plan area.","app":"Autodesk Revit","details":"The raster image is selected in the later view, showing bedrooms, dining, drawing, and kitchen areas."},{"start_s":30935.298,"end_s":30944.838,"action":"Scrolled and dragged across the plan to pan toward the lower-right apartment area, then clicked another location while navigating the raster floor plan.","intent":"Pan and inspect the lower-right portion of the floor plan.","app":"Autodesk Revit","details":"The view shows the lobby, bedrooms, dining, kitchen, toilet, and utility areas."},{"start_s":30944.838,"end_s":30954.443,"action":"Scrolled and panned into the apartment interior, bringing the drawing, dining, kitchen, master bedroom, dress, toilet, and utility labels into close view before selecting the raster image.","intent":"Inspect detailed room layout and annotations.","app":"Autodesk Revit","details":"The raster floor-plan image is selected in the final close-up."},{"start_s":30954.443,"end_s":30961.52,"action":"Tabbed into the text-note selection, clicked and dragged the M.BED ROOM annotation, and left the note selected with its displayed room dimensions updated or repositioned.","intent":"Edit or reposition the master-bedroom text annotation.","app":"Autodesk Revit","details":"The M.BED ROOM note is selected and visibly overlaps another room-label line in the final view."},{"start_s":30961.52,"end_s":30971.507,"action":"Selected the M.BED ROOM text note and edited its dimension text to display “15'”.","intent":"Update the room annotation text.","app":"Autodesk Revit","details":"Floor Plan: GL; text note editing mode."},{"start_s":30971.507,"end_s":30981.526,"action":"Continued editing the M.BED ROOM note, entering “X12'”, then dragged the selected note upward and adjusted the view.","intent":"Complete the room-dimension annotation and reposition it.","app":"Autodesk Revit","details":"The selected note remained visible over the floor plan."},{"start_s":30981.526,"end_s":30990.96,"action":"Selected furniture in the drawing area, resized or moved the Revit window, then selected the DRAWING text note and repositioned it near the upper-left seating area.","intent":"Adjust the floor-plan annotation placement.","app":"Autodesk Revit","details":"Furniture selection highlights appeared before the DRAWING note was selected."},{"start_s":30990.96,"end_s":31001.934,"action":"Selected the DRAWING note and deleted its existing dimension text, leaving the note showing “DRAWING” and “1”.","intent":"Replace the existing drawing annotation content.","app":"Autodesk Revit","details":"Text note remained in edit mode at the end."},{"start_s":31001.934,"end_s":31016.39,"action":"Edited the DRAWING note by entering “11'X” and then adding “6\"”.","intent":"Enter revised drawing dimensions in the text note.","app":"Autodesk Revit","details":"The note visibly showed the partial text “11'X” during the span."},{"start_s":31016.39,"end_s":31027.8,"action":"Continued editing the DRAWING note, entering “12'” after “11'X”, then clicked the note area.","intent":"Complete the revised drawing dimensions.","app":"Autodesk Revit","details":"The note ended visibly as “DRAWING 11'6\"X12'” in edit mode."},{"start_s":31027.8,"end_s":31039.809,"action":"Selected and repositioned the Drawing text note, then panned the floor plan view toward the dining and kitchen area.","intent":"Adjust the text-note placement and inspect the surrounding floor plan.","app":"Autodesk Revit","details":"The Drawing note remained selected while the view shifted."},{"start_s":31039.809,"end_s":31047.674,"action":"Selected the Dining text note and dragged it upward, leaving the note positioned above the dining table.","intent":"Reposition the Dining annotation on the floor plan.","app":"Autodesk Revit","details":"The selected note displays “DINING 14'6\"X11'” above the existing room label."},{"start_s":31047.674,"end_s":31063.305,"action":"Clicked repeatedly on the selected Dining text note, enlarging the view around the note and dining area.","intent":"Inspect or refine the selected Dining annotation.","app":"Autodesk Revit","details":"The note remained selected in text-edit context; no confirmed text change occurred."},{"start_s":31063.305,"end_s":31072.716,"action":"Entered text-edit mode for the Dining note and selected its existing dimension text.","intent":"Prepare the Dining annotation dimensions for editing.","app":"Autodesk Revit","details":"The dimension line in the note was highlighted for replacement."},{"start_s":31072.716,"end_s":31082.178,"action":"Replaced the selected note text by typing “13'”, then “4\\\"”, and beginning the separator with “X”.","intent":"Update the first dimension portion of the Dining annotation.","app":"Autodesk Revit","details":"The note visibly reads “DINING 13'4\\\"” with the edit still in progress."},{"start_s":31082.178,"end_s":31091.84,"action":"Completed the Dining note dimensions by typing “14'2\\\"”, then exited text editing and dragged the selected note slightly to reposition it.","intent":"Finish updating and place the Dining annotation on the plan.","app":"Autodesk Revit","details":"The edited note reads “DINING 13'4\\\"X14'2\\\"” above the existing Dining room label."},{"start_s":31091.84,"end_s":31101.827,"action":"Dragged and repositioned the view, clicked around the selected kitchen text note, and resized the Revit window; left the note selected with part of its text highlighted.","intent":"Adjust the view and prepare the kitchen annotation for editing.","app":"Autodesk Revit","details":"Floor Plan: GL; selected text note shows “KITCHEN” and dimension text."},{"start_s":31101.827,"end_s":31114.292,"action":"Dragged within the selected note and clicked repeatedly in its text area, then entered text-edit mode with the note content highlighted.","intent":"Select the kitchen annotation text for replacement or editing.","app":"Autodesk Revit","details":"The note visibly contains overlapping kitchen labels and dimension text."},{"start_s":31114.292,"end_s":31123.953,"action":"Edited the kitchen note by typing characters, deleting several characters with Backspace, and entering “X”; the visible second line changed during the edit.","intent":"Correct the kitchen annotation’s dimension text.","app":"Autodesk Revit","details":"Text-edit mode remained active; visible content ended around “8'0\"X”."},{"start_s":31123.953,"end_s":31134.901,"action":"Typed the remaining dimension characters, including 14, apostrophe, 4, and quotation mark, then clicked and dragged the note area; the edited note displayed “KITCHEN 8'8\"X14'4\".”","intent":"Complete the kitchen dimensions and adjust the annotation placement or selection.","app":"Autodesk Revit","details":"The original underlying dimension label remained visible beneath the edited note."},{"start_s":31134.901,"end_s":31143.048,"action":"Continued dragging and repositioning the selected kitchen note, then scrolled and clicked around the floor plan, zooming out to show more of the layout.","intent":"Place the edited annotation in context within the floor plan.","app":"Autodesk Revit","details":"The selected kitchen note remained near the kitchen while the view expanded to show dining, bedrooms, toilets, and living areas."},{"start_s":31143.048,"end_s":31162.725,"action":"Waited on the zoomed-out floor plan, then clicked near the kitchen annotation at the lower-right portion of the view.","intent":"Review the overall floor plan and interact with the kitchen annotation.","app":"Autodesk Revit","details":"The final view showed the broader residential floor plan with the kitchen note selected near the bottom-right."},{"start_s":31162.725,"end_s":31172.661,"action":"Adjusted the Revit view and clicked within the floor-plan canvas, slightly repositioning the displayed raster floor plan.","intent":"Navigate the floor-plan view for inspection.","app":"Autodesk Revit","details":"Raster image floor plan remained selected."},{"start_s":31172.661,"end_s":31182.586,"action":"Scrolled and clicked near the lower view area, then used Tab navigation; the plan shifted to show multiple apartment layouts and a text note became selected.","intent":"Navigate the plan and select an annotation.","app":"Autodesk Revit","details":"A text note near the lower apartment layout was selected."},{"start_s":31182.586,"end_s":31193.383,"action":"Zoomed out and dragged across the floor plan, then clicked a text note; the view showed a broader layout with several apartment labels and the note remained selected.","intent":"Review the overall plan and position a text annotation.","app":"Autodesk Revit","details":"Properties identified the selected text note as 1.5MM."},{"start_s":31193.383,"end_s":31204.728,"action":"Dragged the selected text note to reposition it, clicked another plan area, and scrolled while remaining in the Text Notes editing context.","intent":"Reposition and inspect the selected plan annotation.","app":"Autodesk Revit","details":"The selected note was moved near the upper apartment area."},{"start_s":31204.728,"end_s":31213.417,"action":"Clicked and dragged within the raster floor plan, changing the view to a close-up of Bedroom-1, Living, and Toilet-1; a text note became selected over the bedroom area.","intent":"Zoom and position the view for editing a room label.","app":"Autodesk Revit","details":"The selected note displayed BED ROOM-1 and 10'X12\"."},{"start_s":31213.417,"end_s":31223.481,"action":"Clicked the selected BED ROOM-1 note several times and dragged it, then entered text editing and highlighted the 10'X12\" portion.","intent":"Edit the bedroom annotation text.","app":"Autodesk Revit","details":"The text-edit overlay showed BED ROOM-1 with the dimension text highlighted."},{"start_s":31223.481,"end_s":31233.475,"action":"Entered room-label text and dimension text into a Revit text note, then dragged the note to reposition it on the floor plan.","intent":"Update and position a room annotation.","app":"Autodesk Revit","details":"Visible note content included BED ROOM-1 and dimension text."},{"start_s":31233.475,"end_s":31243.896,"action":"Dragged and repositioned the selected text note, then panned the floor plan to the bedroom-2 area and selected the note there.","intent":"Navigate the plan and adjust a room annotation.","app":"Autodesk Revit","details":"The view shifted from bedroom-1 to bedroom-2 and toilet-2."},{"start_s":31243.896,"end_s":31250.662,"action":"Selected and dragged the bedroom-2 text note, repositioning it within the room area.","intent":"Position the bedroom-2 annotation on the plan.","app":"Autodesk Revit","details":"The selected note displayed BED ROOM-1 and 10X12 during editing, while the room label above showed BED ROOM-2."},{"start_s":31250.662,"end_s":31260.373,"action":"Edited the selected text note with a deletion and clicked away, leaving the note displayed as BED ROOM-1 with 10X12.","intent":"Correct the room annotation text.","app":"Autodesk Revit","details":"The note remained visible over bedroom-2."},{"start_s":31260.373,"end_s":31270.629,"action":"Selected the note text, changed the room name from BED ROOM-1 to BED ROOM-2, and dragged within the note area.","intent":"Relabel the annotation for bedroom-2.","app":"Autodesk Revit","details":"The visible note changed to BED ROOM-2 with 10X12."},{"start_s":31270.629,"end_s":31279.9,"action":"Edited the bedroom-2 note dimensions, replacing the prior value with 11'X14'4\", then clicked away to commit the text.","intent":"Update the bedroom-2 dimension annotation.","app":"Autodesk Revit","details":"The final visible note read BED ROOM-2 and 11'X14'4\"."},{"start_s":31279.9,"end_s":31290.297,"action":"Selected and dragged a text note in the Revit floor plan, then zoomed or panned the view to show more of the layout.","intent":"Adjust the selected annotation and inspect the surrounding floor plan.","app":"Autodesk Revit","details":"The BED ROOM-2 note remained selected while the view changed from a close-up to a wider plan view."},{"start_s":31290.297,"end_s":31305.854,"action":"Clicked within the floor plan and zoomed out to review a broader portion of the apartment layout.","intent":"Inspect the overall floor plan context.","app":"Autodesk Revit","details":"The view expanded to show multiple rooms, lobbies, and apartment units."},{"start_s":31305.854,"end_s":31316.763,"action":"Selected raster-image content and interacted with nearby annotations, including a tab keystroke and dragging across the plan.","intent":"Work with the floor-plan image and select an annotation for editing.","app":"Autodesk Revit","details":"The raster image was selected first; by the end, the DINING text note was selected."},{"start_s":31316.763,"end_s":31327.179,"action":"Dragged the selected DINING text note across the floor plan and clicked to place it in a new position.","intent":"Reposition the dining-room annotation.","app":"Autodesk Revit","details":"The DINING label moved from above the dining table to a lower-right location near the utility and toilet area."},{"start_s":31327.179,"end_s":31335.919,"action":"Zoomed out and dragged another selected DINING annotation, then clicked elsewhere on the plan.","intent":"Review the wider layout and adjust another dining annotation.","app":"Autodesk Revit","details":"The view showed several apartment units and the selected label remained visible in the wider plan."},{"start_s":31335.919,"end_s":31345.158,"action":"Dragged the selected annotation toward the upper apartment area and clicked to place it near the balcony, then clicked again to confirm or continue editing.","intent":"Reposition the selected floor-plan text annotation.","app":"Autodesk Revit","details":"The selected note ended near the upper balcony of the right-side apartment."},{"start_s":31345.158,"end_s":31353.18,"action":"Dragged across the Revit floor plan while a text note remained selected, then clicked near the lower-right of the view.","intent":"Adjust the selected text note or its position on the floor plan.","app":"Autodesk Revit","details":"The GL floor plan remained visible with text-note editing tools active."},{"start_s":31353.18,"end_s":31361.651,"action":"Clicked and dragged around the lower-right area of the floor plan, selecting a text note labeled \"DINING 13'4\"X14'2\"\".","intent":"Select and reposition the dining-room text note.","app":"Autodesk Revit","details":"The selected note was highlighted near the lower-right rooms."},{"start_s":31361.651,"end_s":31371.113,"action":"Scrolled and navigated to a zoomed-in portion of the plan, clicked the dining note, and began dragging it within the lower-right room area.","intent":"Move the dining-room annotation to a new location.","app":"Autodesk Revit","details":"The view changed from the full plan to a close-up around the bedroom, dining, and toilet labels."},{"start_s":31371.113,"end_s":31381.804,"action":"Continued dragging the selected dining text note upward and to the right, then entered text-edit mode for the note.","intent":"Position the annotation and edit its label text.","app":"Autodesk Revit","details":"The note remained selected above the M. TOILET area and displayed the existing dining text."},{"start_s":31381.804,"end_s":31391.593,"action":"Edited the text note, replacing the room name from \"DINING\" to \"M.TOILET\" while leaving the displayed dimensions temporarily unchanged.","intent":"Rename the annotation for the master toilet room.","app":"Autodesk Revit","details":"The text-edit overlay showed \"M.TOILET\" with the old 13'4\"X14'2\" dimensions."},{"start_s":31391.593,"end_s":31400.646,"action":"Typed the replacement dimensions into the note, changing them to \"9'4\"X5'6\"\" beneath the \"M.TOILET\" label.","intent":"Complete the master-toilet room annotation with its correct dimensions.","app":"Autodesk Revit","details":"The edited overlay displayed \"M.TOILET\" and \"9'4\"X5'6\".\""},{"start_s":31400.646,"end_s":31410.71,"action":"Dragged and repositioned the selected M.TOILET text note, leaving it displayed over the bathroom area.","intent":"Adjust the position of a floor-plan annotation.","app":"Autodesk Revit","details":"The M.TOILET note remains selected after repositioning."},{"start_s":31410.71,"end_s":31421.086,"action":"Selected the DINING raster-image annotation and dragged the DINING text note to a new position above the bathroom area.","intent":"Reposition overlapping floor-plan annotations.","app":"Autodesk Revit","details":"The DINING note is selected and shown in text-edit positioning mode."},{"start_s":31421.086,"end_s":31430.807,"action":"Entered text-edit mode for the upper room note and replaced its label with “DRESS,” while retaining the displayed dimensions.","intent":"Rename a room annotation.","app":"Autodesk Revit","details":"The note visibly changes from a partial label to DRESS."},{"start_s":31430.807,"end_s":31442.881,"action":"Typed the room dimensions as 5'X6'2\" and exited text editing, leaving the DRESS note visible on the plan.","intent":"Update the dimensions in the DRESS room annotation.","app":"Autodesk Revit","details":"The final note displays DRESS and 5'X6'2\"."},{"start_s":31442.881,"end_s":31451.542,"action":"Dragged the view or selected raster image to another area of the floor plan, then selected the DINING annotation near the kitchen.","intent":"Navigate the floor plan and select another room annotation.","app":"Autodesk Revit","details":"The view shifts to show the kitchen, dining area, fridge, and sink."},{"start_s":31451.542,"end_s":31461.227,"action":"Edited the selected DINING note and replaced its label with “POOJA,” leaving the dimensions 13'4\"X14'2\" unchanged.","intent":"Rename the dining-area annotation.","app":"Autodesk Revit","details":"The final visible note reads POOJA 13'4\"X14'2\"."},{"start_s":31461.227,"end_s":31470.628,"action":"Dragged the POOJA text note within the floor plan, leaving it selected near the POOJA room label.","intent":"Reposition the POOJA annotation.","app":"Autodesk Revit","details":"The selected note displays “POOJA 4'X6'8\"”."},{"start_s":31470.628,"end_s":31480.871,"action":"Dragged across the floor plan and clicked the dining-area annotation, leaving the DINING note selected.","intent":"Select and reposition the dining annotation.","app":"Autodesk Revit","details":"The selected note displays “DINING 13'4\"X14'2\"”."},{"start_s":31480.871,"end_s":31489.251,"action":"Navigated the view around the utility and dining area, then selected and entered text editing for the DINING note.","intent":"Edit the room annotation text.","app":"Autodesk Revit","details":"The DINING note is highlighted in text-edit mode."},{"start_s":31489.251,"end_s":31501.309,"action":"Replaced the DINING label text with “WIDE UTILITY” and began editing the dimension text to “5'6\"”.","intent":"Rename the room annotation and update its dimension label.","app":"Autodesk Revit","details":"The note visibly reads “WIDE UTILITY”; the dimension edit is in progress."},{"start_s":31501.309,"end_s":31511.72,"action":"Deleted the prior dimension text, confirmed the edit, and entered “5'6\"” beneath the WIDE UTILITY label; then selected the note.","intent":"Complete the utility-room annotation update.","app":"Autodesk Revit","details":"The selected note shows WIDE UTILITY with a new 5'6\" dimension entry."},{"start_s":31511.72,"end_s":31521.81,"action":"Dragged and zoomed/panned the floor plan away from the selected utility note, reviewing other rooms and annotations.","intent":"Review the updated floor-plan annotations in a wider view.","app":"Autodesk Revit","details":"The view ends on another portion of the floor plan with dining and bedroom labels visible."},{"start_s":31521.81,"end_s":31530.14,"action":"Selected the room text note and dragged it within the floor plan, repositioning the note over the bathroom area.","intent":"Reposition the room annotation on the plan.","app":"Autodesk Revit","details":"The selected note initially displayed DINING with dimensions and was moved near the toilet area."},{"start_s":31530.14,"end_s":31538.882,"action":"Entered text-edit mode for the selected room note, then clicked around the note and left it selected for editing.","intent":"Prepare the room annotation for text changes.","app":"Autodesk Revit","details":"The note displayed DINING 13'4\"X14'2\" above the existing TOILET-2 annotation."},{"start_s":31538.882,"end_s":31548.477,"action":"Selected the note text and replaced the room name by typing TOILEY-2.","intent":"Rename the room annotation.","app":"Autodesk Revit","details":"The edited note visibly changed from DINING to TOIL/TOILEY-2 while retaining the 13'4\"X14'2\" dimensions."},{"start_s":31548.477,"end_s":31557.571,"action":"Selected the dimension text in the note and edited it, entering a 9' by 6' dimension value.","intent":"Correct the displayed room dimensions.","app":"Autodesk Revit","details":"The note showed TOILEY-2 and the dimension text was actively edited to 9'X6."},{"start_s":31557.571,"end_s":31568.038,"action":"Deleted and corrected characters in the room note, pressed Enter, and continued editing the note text.","intent":"Finalize the room label text and formatting.","app":"Autodesk Revit","details":"The visible note returned to TOILEY-2, with the underlying plan annotation still reading TOILET-2 and 9'0\" x 6'0\"."},{"start_s":31568.038,"end_s":31579.493,"action":"Pressed Enter, entered the dimension text 9'X6', then clicked and dragged the completed note to a new position over the bathroom.","intent":"Complete and reposition the corrected room annotation.","app":"Autodesk Revit","details":"The selected cyan note visibly displayed TOILET-2 and 9'X6' above the existing toilet label."},{"start_s":31579.493,"end_s":31589.654,"action":"Dragged and navigated the floor-plan view, then selected the dining-area text note while zooming out to show more of the apartment plan.","intent":"Inspect and position the dining annotation on the floor plan.","app":"Autodesk Revit","details":"The selected note reads DINING 13'4\"X14'2\"."},{"start_s":31589.654,"end_s":31599.562,"action":"Zoomed into the dining/living area, clicked the raster image and text note, and dragged the selected dining note within the plan.","intent":"Adjust the position of the dining-room annotation over the raster floor plan.","app":"Autodesk Revit","details":"The DINING note was selected and its bounding box was visible."},{"start_s":31599.562,"end_s":31608.38,"action":"Dragged the selected dining note and entered text-edit mode, typing LIVING to replace its room label.","intent":"Rename the selected room annotation from dining to living.","app":"Autodesk Revit","details":"The note still displayed the dining dimensions while the new LIVING label was entered."},{"start_s":31608.38,"end_s":31617.772,"action":"Edited the text note by deleting the previous dimension text and entering replacement characters, leaving the note showing LIVING with an incomplete dimension value.","intent":"Update the living-room annotation dimensions.","app":"Autodesk Revit","details":"Text editing remained active and the visible value was partially replaced."},{"start_s":31617.772,"end_s":31627.824,"action":"Entered the remaining dimension text, producing LIVING 11'X12'2\", then clicked and dragged the completed note to reposition it.","intent":"Complete and place the living-room annotation on the plan.","app":"Autodesk Revit","details":"The note was selected with the updated living dimensions visible."},{"start_s":31627.824,"end_s":31647.824,"action":"Clicked and repositioned the LIVING 11'X12'2\" note, then zoomed out to review its placement within the overall floor plan.","intent":"Review the updated living-room label in context.","app":"Autodesk Revit","details":"The final view showed the apartment plan with the living note selected near the central living area."},{"start_s":31647.824,"end_s":31657.387,"action":"Scrolled slightly and clicked around the dining balcony annotation on the floor-plan image.","intent":"Inspect or select an annotation element.","app":"Autodesk Revit","details":"The GL floor plan remained visible with the dining balcony, bedrooms, living room, and raster image."},{"start_s":31657.387,"end_s":31669.243,"action":"Selected the raster image and clicked around the dining balcony area; briefly resized or repositioned the Revit window and moved focus with Tab.","intent":"Work with the imported floor-plan raster image or its annotations.","app":"Autodesk Revit","details":"The Raster Images contextual tools and raster image properties were visible."},{"start_s":31669.243,"end_s":31679.624,"action":"Selected the dining annotation, dragged within the balcony area, and entered text-edit mode for the note.","intent":"Edit the dining balcony annotation.","app":"Autodesk Revit","details":"The selected note displayed “DINING 13'4\"X14'2\"” beneath the “5'6\" WIDE BALCONY” label."},{"start_s":31679.624,"end_s":31690.139,"action":"Continued editing the dining note, dragged across its text, and typed the beginning of a replacement dimension, “5'”.","intent":"Replace the dining annotation’s dimension text.","app":"Autodesk Revit","details":"The note remained in Edit Text mode and the entered text began replacing the previous dimension."},{"start_s":31690.139,"end_s":31701.929,"action":"Typed the remaining dimension characters, deleted the existing text, and entered “ WIDE” while editing the dining balcony note.","intent":"Revise the balcony annotation wording and dimensions.","app":"Autodesk Revit","details":"The note visibly changed during editing from the original dining dimension toward a new “DINING 5'6\"” and “WIDE” composition."},{"start_s":31701.929,"end_s":31711.478,"action":"Completed the annotation text as “WIDE BALCONY” with a “5'6\"” line, pressed Enter, then selected and dragged the text note to reposition it within the balcony.","intent":"Finalize and position the revised balcony label.","app":"Autodesk Revit","details":"The updated WIDE BALCONY note was selected with its text box handles visible in the final view."},{"start_s":31711.478,"end_s":31716.542,"action":"Dragged and clicked around the Revit floor plan, then scrolled and middle-clicked to adjust the view, leaving a wider portion of the apartment plan visible.","intent":"Navigate and reposition the floor plan view.","app":"Autodesk Revit","details":null},{"start_s":31716.542,"end_s":31735.838,"action":"Paused on the Revit floor plan and performed several scroll actions, with the apartment layout remaining visible.","intent":"Review the floor plan view.","app":"Autodesk Revit","details":null},{"start_s":31735.838,"end_s":31743.968,"action":"Clicked and resized the Revit window, tabbed between controls, then dragged the view to zoom toward the central rooms and clicked the Toilet-2 text note.","intent":"Select and reposition a floor-plan annotation.","app":"Autodesk Revit","details":"Toilet-2 text note became selected."},{"start_s":31743.968,"end_s":31753.76,"action":"Dragged the selected Toilet-2 text note toward the upper-left area of the plan, then clicked and scrolled to zoom in on the nearby Toilet-1 and dining area.","intent":"Reposition and inspect the bathroom annotation.","app":"Autodesk Revit","details":"The view ended zoomed in with a Toilet-2 note selected near the upper-left bathroom area."},{"start_s":31753.76,"end_s":31762.54,"action":"Entered text editing for the Toilet-1 note, typed 1, clicked and dragged within the annotation area, and selected the Toilet-1 label.","intent":"Edit and reposition the Toilet-1 text note.","app":"Autodesk Revit","details":"Toilet-1 text note was selected and displayed with overlapping annotation text."},{"start_s":31762.54,"end_s":31771.803,"action":"Clicked repeatedly in the Toilet-1 annotation and typed 3 while editing the text note.","intent":"Modify the Toilet-1 annotation text.","app":"Autodesk Revit","details":"The text-edit overlay displayed Toilet-1 with a 9'X6' dimension."},{"start_s":31771.803,"end_s":31781.701,"action":"Edited the selected TOILET-1 text note, corrected its dimension text to show 9'3\"X5', then selected and dragged the note within the floor plan.","intent":"Correct and reposition the bathroom annotation.","app":"Autodesk Revit","details":"Floor Plan: GL; text note editing and dragging were visible."},{"start_s":31781.701,"end_s":31791.39,"action":"Zoomed out and clicked around the floor plan, changing the selection from the text note to the raster floor-plan image.","intent":"Review the overall plan and select the underlying raster image.","app":"Autodesk Revit","details":"The view changed to a broader plan view and the raster image became selected."},{"start_s":31791.39,"end_s":31811.39,"action":"Pressed Escape and left the broader floor plan view unchanged.","intent":"Exit the current selection or editing mode.","app":"Autodesk Revit","details":"No further interaction occurred during the remainder of the span."},{"start_s":31811.39,"end_s":31824.696,"action":"Remained on the overall floor plan view with no substantive editing; brief system and window-state changes occurred near the end.","intent":"Pause while reviewing the floor plan.","app":"Autodesk Revit","details":"The plan remained visible and unchanged."},{"start_s":31824.696,"end_s":31835.264,"action":"Selected and dragged a floor-plan element or text note, then invoked an undo command and scrolled the view.","intent":"Adjust an annotation or plan element and review the result.","app":"Autodesk Revit","details":"A selected note was visible near the central-right bedroom area; subsequent view highlighting and scrolling occurred."},{"start_s":31835.264,"end_s":31845.328,"action":"Clicked and scrolled the floor plan, zooming or panning to a closer view of the right-side apartment area, then selected a text note near the bedroom.","intent":"Navigate the plan and inspect or reposition the annotation.","app":"Autodesk Revit","details":"The final view showed the right-side apartment enlarged with a text note selected."},{"start_s":31845.328,"end_s":31851.26,"action":"Selected and dragged a text note on the GL floor plan, then clicked to finish the manipulation.","intent":"Reposition the selected floor-plan annotation.","app":"Autodesk Revit","details":"Text Notes editing mode remained active."},{"start_s":31851.26,"end_s":31866.648,"action":"Reviewed the GL floor plan and scrolled to adjust the view around the selected text note.","intent":"Navigate the floor plan for closer inspection.","app":"Autodesk Revit","details":"The view shifted and zoomed toward the central rooms."},{"start_s":31866.648,"end_s":31881.598,"action":"Clicked around the selected note and scrolled slightly, leaving the view focused on the lobby, kitchen, and adjacent bedrooms.","intent":"Inspect the annotation and its placement on the plan.","app":"Autodesk Revit","details":"No confirmed text change occurred in this span."},{"start_s":31881.598,"end_s":31891.418,"action":"Dragged the selected text note to a new position near the kitchen and goods lift.","intent":"Reposition the floor-plan room annotation.","app":"Autodesk Revit","details":"The note moved over the kitchen area."},{"start_s":31891.418,"end_s":31900.584,"action":"Entered text-edit mode for the selected note and replaced its label by typing corrected text for the kitchen annotation.","intent":"Correct the room label text.","app":"Autodesk Revit","details":"The visible edit text progressed through a mistyped entry and ended with the label beginning “KITEC” while the underlying room label remained visible."},{"start_s":31900.584,"end_s":31910.467,"action":"Completed the text edit so the selected annotation displayed “KITCHEN,” then clicked and scrolled/zoomed out to review the updated plan.","intent":"Finalize the corrected room label and review its placement.","app":"Autodesk Revit","details":"The final view showed the broader floor plan with the kitchen note selected."},{"start_s":31910.467,"end_s":31920.61,"action":"Selected and dragged a text note in the Revit floor plan, repositioning the label around the kitchen and utility area.","intent":"Reposition a floor-plan text annotation.","app":"Autodesk Revit","details":"The selected text note remained in the kitchen/utility region."},{"start_s":31920.61,"end_s":31930.435,"action":"Dragged the selected text note across the floor plan and clicked another note, leaving multiple kitchen labels visible near the bedroom and utility spaces.","intent":"Reposition and select floor-plan text annotations.","app":"Autodesk Revit","details":"The view remained on the GL floor plan with text notes selected."},{"start_s":31930.435,"end_s":31940.692,"action":"Dragged the selected kitchen text note while panning the floor-plan view, moving the view toward the left bedroom and kitchen cluster.","intent":"Adjust the placement of a floor-plan text annotation and inspect its location.","app":"Autodesk Revit","details":"Revit displayed Modify | Scroll dynamically during the pan."},{"start_s":31940.692,"end_s":31950.898,"action":"Dragged the selected note toward the bedroom area, then clicked around the floor plan and resized or repositioned the Revit window; ended with a text-edit focus change via Tab.","intent":"Continue arranging and editing floor-plan annotations.","app":"Autodesk Revit","details":"The selected note was visible near the bedroom before the later interactions."},{"start_s":31950.898,"end_s":31960.926,"action":"Clicked repeatedly in the floor plan and zoomed or panned into the utility area, then selected the utility text note and began dragging it.","intent":"Bring the utility annotation into focus for editing or repositioning.","app":"Autodesk Revit","details":"The view ended zoomed in on the kitchen, W.M./dish washer area, and utility room."},{"start_s":31960.926,"end_s":31971.489,"action":"Edited the utility-room text note by typing and correcting its label, changing it to show “WIDE UTILITY” and then entering “5” on a following line.","intent":"Update the utility-room annotation text.","app":"Autodesk Revit","details":"Text Edit mode remained active; the note visibly displayed “WIDE UTILITY” with “5” beneath it."},{"start_s":31971.489,"end_s":31981.62,"action":"Entered text characters, clicked and dragged across the floor plan, and adjusted the view while working with a text note near the utility area.","intent":"Edit and reposition a floor-plan annotation.","app":"Autodesk Revit","details":"Text note editing controls were active; the view ended centered on the kitchen and wide utility areas."},{"start_s":31981.62,"end_s":31993.882,"action":"Selected and dragged a text note within the small room, resized the Revit window, and clicked repeatedly near the lower edge of the view.","intent":"Reposition the selected room annotation on the floor plan.","app":"Autodesk Revit","details":"The selected note moved within the room area and the displayed room label changed to TOILET-2."},{"start_s":31993.882,"end_s":32002.709,"action":"Clicked and dragged the room text note, then entered text reading TOILET while the note was in text-edit mode.","intent":"Rename the selected room annotation.","app":"Autodesk Revit","details":"The note remained selected over the small room beneath the kitchen label."},{"start_s":32002.709,"end_s":32013.959,"action":"Typed “-2”, then used backspaces and entered additional characters to revise the selected room annotation text.","intent":"Correct and refine the room label text.","app":"Autodesk Revit","details":"The edited note visibly changed from a kitchen label toward TOILET-2."},{"start_s":32013.959,"end_s":32025.276,"action":"Entered the room dimension 8'6\", clicked and dragged the selected TOILET-2 note, and repositioned it within the small room.","intent":"Complete the room label and position it on the plan.","app":"Autodesk Revit","details":"The selected annotation displayed TOILET-2 with a dimension line beneath it."},{"start_s":32025.276,"end_s":32034.295,"action":"Adjusted the view with a middle-click gesture, selected the raster image and nearby annotation, resized the Revit window, and dragged within the plan.","intent":"Inspect and adjust elements around the edited room annotation.","app":"Autodesk Revit","details":"The final view showed the bedroom, TOILET-2, wide utility area, and the raster image selected."},{"start_s":32034.295,"end_s":32044.123,"action":"Clicked and dragged the selected kitchen text note, then entered “BEDROOM-2” in text-edit mode.","intent":"Rename the selected floor-plan text note.","app":"Autodesk Revit","details":"The note remained selected over the bedroom area while text editing was active."},{"start_s":32044.123,"end_s":32053.978,"action":"Navigated and zoomed the floor plan, selected a raster image, and adjusted the view and window before pressing Tab.","intent":"Reposition the view and interact with the floor-plan image or annotation.","app":"Autodesk Revit","details":"The view changed from the kitchen/bedroom area to a broader plan and then to a raster-image selection."},{"start_s":32053.978,"end_s":32064.409,"action":"Clicked and dragged the selected text note across the master-bedroom area, repositioning it while keeping text-edit mode active.","intent":"Adjust the placement of the selected room-label note.","app":"Autodesk Revit","details":"The selected note visibly overlapped the master-bedroom label and dimensions."},{"start_s":32064.409,"end_s":32074.684,"action":"Typed the room label incrementally as “M.BEDROOM,” with additional editing and backspace input.","intent":"Edit the selected room-label text.","app":"Autodesk Revit","details":"The note displayed partial text during editing, ending with the visible “M.BEDROO” state."},{"start_s":32074.684,"end_s":32083.914,"action":"Selected and dragged the master-bedroom text note, then rotated or adjusted it and zoomed out to a wider floor-plan view.","intent":"Reposition and inspect the edited room label in the overall plan.","app":"Autodesk Revit","details":"The note remained selected near the upper-left bedroom as the plan expanded to show multiple units."},{"start_s":32083.914,"end_s":32093.291,"action":"Zoomed and panned across the overall floor plan, selected the raster image, and pressed Tab while adjusting the view.","intent":"Inspect the broader floor plan and interact with the placed raster image.","app":"Autodesk Revit","details":"The final view showed multiple apartments, corridors, stairs, and the selected raster-image context."},{"start_s":32093.291,"end_s":32103.016,"action":"Dragged across the floor plan, then clicked to select a text note near the lower bedroom area and adjusted the view by additional clicks.","intent":"Reposition and select an annotation on the floor plan.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible; a text note was selected near the lower portion of the plan."},{"start_s":32103.016,"end_s":32113.585,"action":"Zoomed and repositioned the floor plan, selected a raster image, and then clicked a room text note near the dining area.","intent":"Inspect the plan and select an annotation for editing.","app":"Autodesk Revit","details":"The view zoomed into the dining, kitchen, utility, and bedroom area; the M.BEDROOM note became selected."},{"start_s":32113.585,"end_s":32123.603,"action":"Dragged the selected M.BEDROOM text note across the plan, moving it from the upper-right area toward the lower-left bedroom.","intent":"Reposition the bedroom label on the floor plan.","app":"Autodesk Revit","details":"The M.BEDROOM 15'X12' 0\" note was visibly moved and remained selected near the lower-left bedroom."},{"start_s":32123.603,"end_s":32134.457,"action":"Continued dragging and repositioning the M.BEDROOM text note, then clicked to select another bedroom annotation near the upper-left bedroom.","intent":"Arrange bedroom annotations on the floor plan.","app":"Autodesk Revit","details":"The plan view shifted slightly, and a different M.BEDROOM note near the upper-left room was selected."},{"start_s":32134.457,"end_s":32141.859,"action":"Adjusted the view, clicked among bedroom annotations, and dragged a selected M.BEDROOM note toward the upper-left bedroom area.","intent":"Continue placing bedroom labels on the floor plan.","app":"Autodesk Revit","details":"The floor plan was zoomed out to show the living, dining, kitchen, lobby, and bedrooms; the selected label moved within the upper-left bedroom region."},{"start_s":32141.859,"end_s":32153.184,"action":"Selected the raster image and then clicked and dragged around the toilet area, ending with the TOILET-2 text note selected near the upper-left portion of the plan.","intent":"Inspect and reposition annotations around the toilet area.","app":"Autodesk Revit","details":"The final view showed the full apartment plan with TOILET-2 selected; the Raster Images context appeared briefly before text-note selection."},{"start_s":32153.184,"end_s":32163.126,"action":"Selected elements on the Revit floor plan, resized the window, and moved focus between plan objects with Tab.","intent":"Inspect or select floor-plan annotations and raster-image elements.","app":"Autodesk Revit","details":"The GL floor plan remained visible; the selection changed from a text note to a raster image."},{"start_s":32163.126,"end_s":32169.78,"action":"Clicked the upper-right bedroom area, dragged across the plan, and clicked a lower-left plan annotation, leaving a text note selected.","intent":"Select and inspect a text note in the floor plan.","app":"Autodesk Revit","details":"The selected text note appears in the upper-left living-area region by the end of the span."},{"start_s":32169.78,"end_s":32179.462,"action":"Exited the active selection with Escape, clicked the right-side drawing-room area, resized the window, and used Tab to cycle selection; a furniture/raster element became selected.","intent":"Inspect and select plan elements around the drawing room.","app":"Autodesk Revit","details":"The right-side drawing-room furniture is highlighted in the final screenshot."},{"start_s":32179.462,"end_s":32184.356,"action":"Clicked and dragged across the central plan, then clicked the central-left drawing-room area, leaving a text note selected.","intent":"Select and inspect another floor-plan text note.","app":"Autodesk Revit","details":"The final selection is a text note near the central-left drawing room."},{"start_s":32184.356,"end_s":32204.356,"action":"Remained on the GL floor plan with the central text note selected; no substantive interaction occurred.","intent":"Review the current floor-plan selection.","app":"Autodesk Revit","details":"Only brief application hide/unhide events occurred."},{"start_s":32204.356,"end_s":32224.356,"action":"Remained idle on the Revit floor plan while the desktop resumed after system configuration and connectivity changes.","intent":"Wait while the current Revit view remains open.","app":"Autodesk Revit","details":"No direct UI interaction was recorded; system-level screen, network, power, input, and memory events occurred."},{"start_s":32224.356,"end_s":32234.391,"action":"Selected the drawing text note and edited its dimension text, changing the visible value to 11'0\"X12'.","intent":"Correct the displayed drawing dimensions.","app":"Autodesk Revit","details":"Text note remained in edit mode."},{"start_s":32234.391,"end_s":32246.014,"action":"Edited the selected drawing note, changing the first dimension to 12'0\" and then deleting part of the second dimension.","intent":"Continue correcting the drawing dimensions.","app":"Autodesk Revit","details":"The note visibly ended as 12'0\"X1'."},{"start_s":32246.014,"end_s":32255.758,"action":"Exited the text edit state, zoomed and panned across the floor plan, then selected and dragged a text note toward the living-room area.","intent":"Reposition and inspect an annotation on the floor plan.","app":"Autodesk Revit","details":"The view moved from the drawing area to the living room."},{"start_s":32255.758,"end_s":32265.881,"action":"Selected the living-room text note, zoomed in, and edited its dimensions by deleting the existing ending and typing 7'.","intent":"Correct the living-room dimensions.","app":"Autodesk Revit","details":"The visible edited text ended as LIVING 11'X7'."},{"start_s":32265.881,"end_s":32276.17,"action":"Dragged the living-room note, then zoomed out and reviewed the broader floor plan with the annotation no longer prominently selected.","intent":"Review annotation placement and overall plan context.","app":"Autodesk Revit","details":"The view showed multiple apartment layouts and labeled rooms."},{"start_s":32276.17,"end_s":32285.346,"action":"Zoomed and panned across the overall floor plan, then pressed Tab to cycle the selection; the view remained on the apartment layouts.","intent":"Inspect the plan and cycle selectable elements.","app":"Autodesk Revit","details":"The final view showed two adjacent apartment plans with labels and room layouts."},{"start_s":32285.346,"end_s":32293.508,"action":"Scrolled and dragged across the Revit floor plan, then clicked a text note near the upper balcony area.","intent":"Navigate and select a floor-plan annotation.","app":"Autodesk Revit","details":"Floor Plan: GL remained open with text-note editing tools visible."},{"start_s":32293.508,"end_s":32304.086,"action":"Dragged to zoom or pan into the upper living, drawing, and balcony area, then clicked and adjusted the view around the selected notes.","intent":"Inspect and position the floor-plan annotations.","app":"Autodesk Revit","details":"The view changed from the full plan to a closer view showing WIDE BALCONY, LIVING, DRAWING, and nearby rooms."},{"start_s":32304.086,"end_s":32315.096,"action":"Scrolled and dragged the plan, selected the dining-area text note, and typed replacement text beginning with “DINING.”","intent":"Edit the dining-area annotation label.","app":"Autodesk Revit","details":"Text Edit mode was active and the selected note displayed partial text while editing."},{"start_s":32315.096,"end_s":32326.291,"action":"Clicked the dining annotation, entered the dimension text “17'6\" X 12'6\",” and continued editing the note.","intent":"Update the dining annotation dimensions.","app":"Autodesk Revit","details":"The dining note visibly showed the entered first dimension during the span."},{"start_s":32326.291,"end_s":32336.739,"action":"Clicked and dragged across the plan, selecting and repositioning text notes around the dining and living areas.","intent":"Adjust annotation placement on the floor plan.","app":"Autodesk Revit","details":"Selected notes included DINING and LIVING; the view was panned to a closer area."},{"start_s":32336.739,"end_s":32345.648,"action":"Dragged to pan the view, selected the TOILET-2 annotation, and clicked repeatedly to edit or reposition it over the toilet room.","intent":"Adjust the toilet-room annotation.","app":"Autodesk Revit","details":"The final view showed TOILET-1 above and the selected TOILET-2 note displaying 5'X8'6\"."},{"start_s":32345.648,"end_s":32355.173,"action":"Edited a toilet room text note, correcting its displayed dimensions to 6' x 8' and dragging the selected note within the floor plan.","intent":"Correct and reposition the toilet room annotation.","app":"Autodesk Revit","details":"Floor plan GL; TOILET-1 note selected."},{"start_s":32355.173,"end_s":32365.087,"action":"Navigated to the bedroom area and selected the bedroom text note, then dragged it within the plan for placement.","intent":"Adjust the bedroom annotation position.","app":"Autodesk Revit","details":"M.BEDROOM note visible and selected."},{"start_s":32365.087,"end_s":32375.935,"action":"Replaced the selected bedroom note text with BEDROOM-1, adjusted its dimension text, and dragged the note into position.","intent":"Rename and format the bedroom annotation.","app":"Autodesk Revit","details":"Bedroom note displays BEDROOM-1 with an 11' x 12' dimension."},{"start_s":32375.935,"end_s":32386.111,"action":"Panned and zoomed to the lower bedroom/toilet area, selected a bedroom note, and dragged it while repositioning the annotation.","intent":"Reposition a room label in the lower floor-plan area.","app":"Autodesk Revit","details":"Lower plan area shows M.BEDROOM and M.TOILET labels."},{"start_s":32386.111,"end_s":32395.559,"action":"Edited the selected room note text from bedroom to TOILET and changed its dimensions to 6' x 12'.","intent":"Rename and correct the toilet room annotation.","app":"Autodesk Revit","details":"Selected note displays M.TOILET 6' x 12'."},{"start_s":32395.559,"end_s":32405.953,"action":"Corrected the toilet note dimensions to 6' x 8'6\" and dragged the selected bedroom annotation toward the right side of the plan.","intent":"Finalize room-note dimensions and placement.","app":"Autodesk Revit","details":"M.TOILET displays 6' x 8'6\"; M.BEDROOM remains selected near the dressing area."},{"start_s":32405.953,"end_s":32416.123,"action":"Selected and repositioned a text note on the floor plan, then entered dimension text beginning with 5', X, 8, and 6'.","intent":"Edit a room label or its displayed dimensions.","app":"Autodesk Revit","details":"Text note editing was active near the DRESS room."},{"start_s":32416.123,"end_s":32426.028,"action":"Selected the DRESS text note and dragged the view/annotation, then selected and repositioned the M.BEDROOM note.","intent":"Reposition room annotations on the floor plan.","app":"Autodesk Revit","details":"The M.BEDROOM note was visibly selected and moved lower in the plan."},{"start_s":32426.028,"end_s":32435.827,"action":"Selected and adjusted the M.BEDROOM note, navigated the floor plan, and exited text editing to return to the broader plan view.","intent":"Continue arranging room labels and review the floor plan.","app":"Autodesk Revit","details":"The view ended showing the bedroom, BEDROOM-2, kitchen, and toilet areas."},{"start_s":32435.827,"end_s":32443.527,"action":"Selected and repositioned the BEDROOM-2 annotation, then scrolled and exited editing while reviewing its placement.","intent":"Arrange and inspect the BEDROOM-2 room label.","app":"Autodesk Revit","details":"BEDROOM-2 remained selected during the annotation adjustment."},{"start_s":32443.527,"end_s":32453.712,"action":"Scrolled to the kitchen and toilet area, then selected and dragged the TOILET-2 text note.","intent":"Navigate to and reposition another room annotation.","app":"Autodesk Revit","details":"The view showed KITCHEN, TOILET-2, BEDROOM-2, and utility labels."},{"start_s":32453.712,"end_s":32462.417,"action":"Selected and moved the kitchen-area text note, then entered text editing and typed 5.","intent":"Edit and position the kitchen or adjacent room annotation.","app":"Autodesk Revit","details":"The selected note displayed KITCHEN 10'X12', with POOJA visible beneath it."},{"start_s":32462.417,"end_s":32472.276,"action":"Edited a Revit text note, entered dimension-like text, and clicked and dragged within the note area.","intent":"Modify a room annotation in the floor plan.","app":"Autodesk Revit","details":"The floor plan shows the selected kitchen note with text editing active."},{"start_s":32472.276,"end_s":32481.308,"action":"Replaced the selected note text with “POOJA,” repositioned the POOJA annotation, and zoomed or panned the floor plan to a wider view.","intent":"Rename and place the room annotation.","app":"Autodesk Revit","details":"The POOJA note is selected near the kitchen and toilet annotations."},{"start_s":32481.308,"end_s":32490.884,"action":"Exited the prior selection, navigated the floor plan by middle-clicking and scrolling, then selected and dragged the WIDE UTILITY annotation.","intent":"Reposition the utility-room annotation.","app":"Autodesk Revit","details":"The WIDE UTILITY text note is selected and being moved in the final view."},{"start_s":32490.884,"end_s":32500.741,"action":"Exited text editing and zoomed or panned across the floor plan, ending with the DRAWING annotation selected near the lobby.","intent":"Review the overall plan and select another room annotation.","app":"Autodesk Revit","details":"The view transitions from a full-plan overview to the lobby and drawing-room area."},{"start_s":32500.741,"end_s":32520.741,"action":"Dragged the selected DRAWING annotation from the drawing room toward the lobby area and left it repositioned above the lobby.","intent":"Reposition the drawing-room annotation.","app":"Autodesk Revit","details":"The DRAWING note appears above the lobby in the final screenshot."},{"start_s":32520.741,"end_s":32540.741,"action":"Remained idle with the DRAWING annotation selected in the lobby area; no further interaction was recorded.","intent":"Pause while reviewing the adjusted floor-plan annotation.","app":"Autodesk Revit","details":"The view remains on the lobby with the selected DRAWING note."},{"start_s":32540.741,"end_s":32550.942,"action":"Selected the upper text note and replaced its room label with “LOBBY.”","intent":"Rename the text note to identify the lobby.","app":"Autodesk Revit","details":"The note remains in text-edit mode after typing."},{"start_s":32550.942,"end_s":32559.567,"action":"Selected the lobby note’s dimension line, entered “15'X,” and used backspace to revise the text.","intent":"Edit the lobby note’s dimension text.","app":"Autodesk Revit","details":"Text editing continued with partial dimension content visible."},{"start_s":32559.567,"end_s":32569.361,"action":"Completed the dimension entry as “15'5\"X9'3\", then exited text editing and zoomed or panned the floor plan to show more of the layout.","intent":"Set the lobby note dimensions and review its placement in the plan.","app":"Autodesk Revit","details":"The lobby note is selected in the wider floor-plan view."},{"start_s":32569.361,"end_s":32579.49,"action":"Navigated and zoomed the floor plan, then selected the lobby text note over the lift area and entered text-edit mode.","intent":"Reposition the view and prepare the lobby note for further editing.","app":"Autodesk Revit","details":"The selected note displays “LOBBY” and “15'5\"X9'3\".”"},{"start_s":32579.49,"end_s":32589.97,"action":"Edited the note text by typing and correcting the label, changing it to “GOOD'S LIFT,” while retaining the dimension line.","intent":"Rename the note to identify the goods lift.","app":"Autodesk Revit","details":"The edited note visibly reads “GOOD'S LIF” by the end of the span."},{"start_s":32589.97,"end_s":32599.526,"action":"Dragged the selected text note to reposition it over the lift area, leaving the “GOOD'S LIFT” label and “7'6\"X10'” dimensions visible.","intent":"Place the goods-lift annotation over the corresponding plan feature.","app":"Autodesk Revit","details":"The final view shows overlapping selected and placed annotation text near the lift."},{"start_s":32599.526,"end_s":32609.894,"action":"Dragged and clicked around the selected GOOD'S LIFT text note, then zoomed and panned the floor plan until the note was enlarged and selected.","intent":"Adjust the view and select the lift annotation for editing.","app":"Autodesk Revit","details":"Floor Plan: GL; selected note reads GOOD'S LIFT 7'6\"X10'."},{"start_s":32609.894,"end_s":32620.204,"action":"Entered text-edit mode and dragged across portions of the selected lift note, changing the text selection from GOOD'S LIFT to the dimension line.","intent":"Prepare specific text within the note for modification.","app":"Autodesk Revit","details":"Text note remained in edit mode; the dimension text 7'6\"X10' was visible and selected near the end."},{"start_s":32620.204,"end_s":32634.201,"action":"Replaced the selected note text by typing 7'11\"X10'8, then clicked away and panned the floor plan; pressed Escape as the view switched back to the main Revit window.","intent":"Update the lobby annotation dimensions and return to the drawing view.","app":"Autodesk Revit","details":"The edited note visibly reads LOBBY 7'11\"X10'8."},{"start_s":32634.201,"end_s":32644.853,"action":"Exited text editing, zoomed and panned across the floor plan to the bedroom and drawing area, and clicked within the plan while the view repositioned.","intent":"Review the updated annotation in the surrounding floor plan.","app":"Autodesk Revit","details":"Main Revit floor plan view showed the updated LOBBY note near the upper-left area before panning to the 3BHK layout."},{"start_s":32644.853,"end_s":32655.975,"action":"Selected the BEDROOM-2 text note, dragged within it, and panned/zoomed the floor plan toward the bedroom area.","intent":"Inspect or adjust the bedroom annotation.","app":"Autodesk Revit","details":"BEDROOM-2 note was visibly selected with its text and boundary handles."},{"start_s":32655.975,"end_s":32666.394,"action":"Panned and zoomed farther across the floor plan, moving from the bedroom area to the dining, master bedroom, dressing, toilet, and kitchen regions.","intent":"Navigate and review other annotated rooms in the plan.","app":"Autodesk Revit","details":"No text change was visible; the final view centered on DINING, M.BEDROOM, DRESS, POOJA, and toilet annotations."},{"start_s":32666.394,"end_s":32676.504,"action":"Selected and repositioned text annotations on the GL floor plan, then zoomed or panned to a wider view of the layout.","intent":"Adjust the floor-plan view and annotation placement.","app":"Autodesk Revit","details":"The view ended on a wider floor plan showing the bedrooms, dining, drawing, kitchen, and adjacent areas."},{"start_s":32676.504,"end_s":32696.504,"action":"Paused while viewing the GL floor plan.","intent":"Review the current floor-plan layout.","app":"Autodesk Revit","details":null},{"start_s":32696.504,"end_s":32708.69,"action":"Scrolled to zoom into the upper-middle portion of the floor plan and clicked within the drawing.","intent":"Inspect a more detailed area of the floor plan.","app":"Autodesk Revit","details":"The view focused on Bedroom-1, Bedroom-2, Toilet-1, Pooja, Dining, Drawing, and part of the Kitchen."},{"start_s":32708.69,"end_s":32718.285,"action":"Navigated among nearby annotation targets with Tab, selected an element, and dragged it slightly within the upper bedroom and toilet area.","intent":"Select and adjust a floor-plan annotation or element.","app":"Autodesk Revit","details":"The final view showed a selected wall or annotation near Bedroom-2 and Toilet-2."},{"start_s":32718.285,"end_s":32727.875,"action":"Selected the Bedroom-2 text note, zoomed into the toilet and bedroom area, and entered text-edit mode for the note.","intent":"Edit the room annotation text.","app":"Autodesk Revit","details":"The text note overlay was selected near Toilet-2 and Bedroom-2."},{"start_s":32727.875,"end_s":32737.54,"action":"Replaced the selected room-note text by typing “TOILET,” deleting characters, and entering “6X,” leaving the note displayed as “TOILET-2” with “6'” beneath it.","intent":"Update the Toilet-2 annotation label and dimension text.","app":"Autodesk Revit","details":"Text editing remained active in the Revit floor plan."},{"start_s":32737.54,"end_s":32744.448,"action":"Edited the selected TOILET-2 text note, entering `8'` and then `3\"`, and clicked within the note.","intent":"Update the displayed toilet dimensions.","app":"Autodesk Revit","details":"The note visibly changed to include 6'X8'3\"."},{"start_s":32744.448,"end_s":32753.513,"action":"Selected the TOILET-2 text note and dragged it to reposition the annotation within the bathroom.","intent":"Adjust the note's placement on the floor plan.","app":"Autodesk Revit","details":"The note remained selected with its bounding box visible."},{"start_s":32753.513,"end_s":32762.522,"action":"Continued repositioning the selected TOILET-2 note, then clicked and middle-dragged the view to pan across the floor plan.","intent":"Place the annotation and inspect its surrounding layout.","app":"Autodesk Revit","details":"The view panned while the TOILET-2 note remained selected."},{"start_s":32762.522,"end_s":32772.449,"action":"Dragged the TOILET-2 text note to the left bathroom area and clicked to place it.","intent":"Reposition the annotation near the intended bathroom.","app":"Autodesk Revit","details":"A second TOILET-2 note appears selected near the upper-left bathroom."},{"start_s":32772.449,"end_s":32781.333,"action":"Dragged the selected TOILET-2 note within the left bathroom area and clicked repeatedly near its edit control.","intent":"Fine-tune the note position and access text editing.","app":"Autodesk Revit","details":"The note remained selected and an Edit Text tooltip appeared."},{"start_s":32781.333,"end_s":32791.995,"action":"Edited the text note with backspaces, Enter, and additional keystrokes, changing the visible label to a shortened TOILET-2 dimension note.","intent":"Correct the text content of the bathroom annotation.","app":"Autodesk Revit","details":"The final visible note reads TOILET- with 6'X8'3\" beneath it."},{"start_s":32791.995,"end_s":32802.343,"action":"Edited the selected TOILET-1 text note by entering and correcting numeric characters while remaining in Revit text-edit mode.","intent":"Adjust the text note content.","app":"Autodesk Revit","details":"The floor plan remained centered on the toilet and adjacent bedroom area."},{"start_s":32802.343,"end_s":32811.43,"action":"Corrected the text note with backspace and numeric input, selected the TOILET-1 annotation, and dragged the view to reposition the floor-plan display.","intent":"Refine and reposition the TOILET-1 annotation in the plan.","app":"Autodesk Revit","details":"TOILET-1 remained selected and visible after the view was repositioned."},{"start_s":32811.43,"end_s":32821.552,"action":"Selected and dragged the TOILET-1 text note from the bathroom area toward the bedroom area, then clicked around the plan to continue positioning or selection.","intent":"Move the TOILET-1 annotation to a new location.","app":"Autodesk Revit","details":"The annotation was shown over the bedroom area by the end of the drag."},{"start_s":32821.552,"end_s":32827.521,"action":"Dragged the annotation into the bedroom area, entered text-edit mode, and replaced its label text with BEDROOM.","intent":"Rename the selected annotation for the bedroom.","app":"Autodesk Revit","details":"The note displayed a partially entered BEDROO-1 label while editing."},{"start_s":32827.521,"end_s":32839.703,"action":"Paused in Revit text-edit mode, then clicked within the BEDROOM-1 note to place the text cursor near its dimension line.","intent":"Continue editing the bedroom annotation.","app":"Autodesk Revit","details":"The note visibly read BEDROOM-1 with 5'X8'9\" beneath it."},{"start_s":32839.703,"end_s":32849.405,"action":"Selected the dimension text in the BEDROOM-1 note and typed 10, followed by additional dimension characters, replacing the existing value.","intent":"Update the bedroom annotation's displayed dimensions.","app":"Autodesk Revit","details":"The dimension line visibly changed to 10 during editing."},{"start_s":32849.405,"end_s":32859.932,"action":"Selected the BEDROOM-1 text note and dragged it across the floor plan, leaving it selected near the lower central toilet area.","intent":"Reposition the selected room label on the floor plan.","app":"Autodesk Revit","details":"The selected note changed from BEDROOM-1 to a selected TOILET-1 note during the drag sequence."},{"start_s":32859.932,"end_s":32868.582,"action":"Dragged the selected TOILET-1 text note while zooming or panning the view, ending with the note positioned in the small room below the upper toilet.","intent":"Reposition the TOILET-1 room label.","app":"Autodesk Revit","details":"The view ended zoomed in on overlapping TOILET-1 labels."},{"start_s":32868.582,"end_s":32878.618,"action":"Continued dragging the selected text note and then entered text-edit mode for the lower room label, displaying TOILET-1 and its dimensions.","intent":"Prepare the room annotation for text editing.","app":"Autodesk Revit","details":"The lower room label remained selected and the Edit Text ribbon was visible."},{"start_s":32878.618,"end_s":32889.739,"action":"Selected the room-name text, replaced TOILET-1 with POOJA, deleted the prior dimension text, and typed 3'5\" into the note.","intent":"Rename and revise the room annotation.","app":"Autodesk Revit","details":"The visible note changed to POOJA while the existing 5'X8'9\" line remained visible."},{"start_s":32889.739,"end_s":32900.418,"action":"Finished the text entry, exited text editing, and zoomed or panned the floor plan to review the updated POOJA annotation among duplicated labels.","intent":"Review the updated room label in context.","app":"Autodesk Revit","details":"The view returned to the wider floor plan with POOJA labels visible near the central rooms."},{"start_s":32900.418,"end_s":32911.085,"action":"Selected the BEDROOM-1 text note and dragged it from the upper-left bedroom area toward the dining and drawing-room region, leaving it selected there.","intent":"Reposition the BEDROOM-1 room label.","app":"Autodesk Revit","details":"The final view showed the selected BEDROOM-1 note above the dining area."},{"start_s":32911.085,"end_s":32920.771,"action":"Dragged and clicked around the floor-plan annotations, then resized or repositioned the Revit window and selected a raster image.","intent":"Adjust or inspect overlapping floor-plan elements.","app":"Autodesk Revit","details":"Floor Plan: GL remained visible with bedroom labels and furniture."},{"start_s":32920.771,"end_s":32931.089,"action":"Selected the BEDROOM-1 text note, dragged it toward the upper-center of the plan, and entered text-edit mode with the caret in the note.","intent":"Reposition and edit the bedroom annotation.","app":"Autodesk Revit","details":"The note was visibly selected and later displayed in a dark text-edit box."},{"start_s":32931.089,"end_s":32941.417,"action":"Edited the selected note by typing and correcting characters, leaving the visible text beginning with “DINI” above the 10'X12' dimension line.","intent":"Change the room-label text.","app":"Autodesk Revit","details":"Text editing remained active."},{"start_s":32941.417,"end_s":32951.306,"action":"Deleted and retyped dimension text, adding characters that visibly formed “DINING” and a partial “16'6\"X11” line.","intent":"Complete the dining-room annotation and dimensions.","app":"Autodesk Revit","details":"The edited note showed DINING with a partially entered dimension."},{"start_s":32951.306,"end_s":32958.397,"action":"Selected and dragged the DINING note, then clicked elsewhere and resized or repositioned the Revit window; the view shifted to show more of the floor plan.","intent":"Position the dining annotation and adjust the view.","app":"Autodesk Revit","details":"The final view showed overlapping DINING labels, BEDROOM-1, kitchen, and bedroom areas."},{"start_s":32958.397,"end_s":32978.397,"action":"Remained inactive while the Revit floor plan stayed displayed.","intent":"Review the updated floor plan.","app":"Autodesk Revit","details":"No recorded interaction events."},{"start_s":32978.397,"end_s":32993.693,"action":"Waited in Autodesk Revit, then clicked near the drawing area as the application resumed after system changes.","intent":"Continue editing the floor plan.","app":"Autodesk Revit","details":null},{"start_s":32993.693,"end_s":32998.937,"action":"Tabbed through controls, selected the BEDROOM-1 text note, and dragged it, leaving overlapping text notes visible near the bedroom and drawing area.","intent":"Reposition the floor-plan text annotation.","app":"Autodesk Revit","details":"Text Notes editing mode was active."},{"start_s":32998.937,"end_s":33018.937,"action":"Paused while reviewing the selected BEDROOM-1 text note and the floor plan.","intent":"Review the text-note placement.","app":"Autodesk Revit","details":null},{"start_s":33018.937,"end_s":33034.697,"action":"Selected the BEDROOM-1 text note and dragged across its text, entering inline text-edit mode with the note highlighted.","intent":"Edit the room label.","app":"Autodesk Revit","details":"The note displayed BEDROOM-1 and 10'X12'."},{"start_s":33034.697,"end_s":33042.799,"action":"Clicked into the selected note, replaced the room-name text through typing and correction, and changed the visible label from BEDROOM-1 to DRAW.","intent":"Rename the room text note.","app":"Autodesk Revit","details":"The dimension line remained visible beneath the edited label."},{"start_s":33042.799,"end_s":33052.033,"action":"Deleted additional characters, then typed 6 and a colon and backspaced once while continuing to edit the text note; the visible label showed DRAWING with 12' beneath it.","intent":"Refine the room label text and dimensions.","app":"Autodesk Revit","details":"Inline text editing remained active."},{"start_s":33052.033,"end_s":33061.585,"action":"Edited the selected Revit text note by entering and deleting punctuation, then typed “X11” and another apostrophe.","intent":"Modify the text content of a floor-plan annotation.","app":"Autodesk Revit","details":"Text-note edit mode was active."},{"start_s":33061.585,"end_s":33070.799,"action":"Clicked and dragged within the floor plan, navigated the view, and selected different text notes, ending with the BEDROOM-1 note selected.","intent":"Reposition or inspect floor-plan annotations.","app":"Autodesk Revit","details":"The view was resized and the BEDROOM-1 annotation remained selected."},{"start_s":33070.799,"end_s":33080.589,"action":"Dragged the selected BEDROOM-1 annotation to a new position near the master bedroom, then clicked elsewhere in the plan.","intent":"Reposition the BEDROOM-1 text annotation.","app":"Autodesk Revit","details":"The BEDROOM-1 label appears relocated above the master bedroom."},{"start_s":33080.589,"end_s":33090.176,"action":"Selected the raster image and dragged within the floor plan, then selected the TOILET-1 text note.","intent":"Inspect or adjust plan annotations and the underlay image.","app":"Autodesk Revit","details":"The raster image was selected initially; TOILET-1 was selected by the end."},{"start_s":33090.176,"end_s":33100.681,"action":"Selected the raster image again, clicked around the BEDROOM-1 label, pressed Tab, and scrolled the Revit view.","intent":"Select and inspect overlapping floor-plan elements.","app":"Autodesk Revit","details":"The raster image remained selected while the BEDROOM-1 annotation was visible."},{"start_s":33100.681,"end_s":33110.724,"action":"Zoomed into the master-bedroom area, entered text editing for BEDROOM-1, deleted existing characters, and typed “M.”.","intent":"Edit the BEDROOM-1 floor-plan text note.","app":"Autodesk Revit","details":"The note displayed “BEDROOM-1” and “10'X12'” before editing; the final text was partially changed."},{"start_s":33110.724,"end_s":33120.87,"action":"Deleted existing text in the selected bedroom text note, then entered characters including 4, an apostrophe, and X.","intent":"Edit the bedroom annotation text.","app":"Autodesk Revit","details":"Floor plan GL remained visible with the bedroom text note in text-edit mode."},{"start_s":33120.87,"end_s":33130.463,"action":"Entered additional dimension characters, including 13, an apostrophe, 4, and a quotation mark, then clicked within the bedroom note.","intent":"Complete the bedroom annotation dimensions.","app":"Autodesk Revit","details":"The note visibly read approximately “M.BEDROOM” and “14'X13'4” while remaining in edit mode."},{"start_s":33130.463,"end_s":33140.225,"action":"Exited text editing, selected the bedroom text note, dragged across the plan, and middle-clicked to pan the view toward the kitchen and bathroom area.","intent":"Reposition and inspect the edited floor-plan annotation.","app":"Autodesk Revit","details":"The bedroom note remained selected while the view shifted downward and right."},{"start_s":33140.225,"end_s":33160.225,"action":"Scrolled the floor-plan view to adjust the framing while keeping the bedroom note selected.","intent":"Adjust the plan view for continued annotation work.","app":"Autodesk Revit","details":"The view showed the bedroom, kitchen, toilet, and utility areas."},{"start_s":33160.225,"end_s":33175.228,"action":"Clicked near the lower-right portion of the plan; brief application and window state changes occurred without a clear visible content change.","intent":"Continue interacting with the floor-plan view.","app":"Autodesk Revit","details":"The bedroom annotation remained selected and the plan stayed visible."},{"start_s":33175.228,"end_s":33185.04,"action":"Pressed Tab, clicked and dragged across the toilet annotation area, then clicked repeatedly to select and enter text editing for the toilet note.","intent":"Edit or select the toilet room annotation.","app":"Autodesk Revit","details":"The toilet note became selected and text-edit mode showed “TOILET-1” with dimensions approximately “5'X8'9”."},{"start_s":33185.04,"end_s":33194.348,"action":"Edited the selected upper toilet text note, deleting characters, entering “M.”, and dragging across the note area to position or select the text.","intent":"Update the room label text.","app":"Autodesk Revit","details":"Floor plan GL; selected note displays “M.TOILET”."},{"start_s":33194.348,"end_s":33204.778,"action":"Entered and corrected the toilet room dimension text to “5'6\"X8'6\"”, then clicked and dragged the selected text note.","intent":"Correct the toilet room dimensions and adjust the annotation.","app":"Autodesk Revit","details":"The upper selected note shows “M.TOILET 5'6\"X8'6\"”."},{"start_s":33204.778,"end_s":33224.778,"action":"Dragged the selected toilet text note and clicked another toilet annotation, leaving the lower note selected on the floor plan.","intent":"Reposition or select the toilet room annotation.","app":"Autodesk Revit","details":"The lower note is selected and displays “M.TOILET 5'6\"X8'6\"”."},{"start_s":33224.778,"end_s":33242.505,"action":"Paused on the floor plan, then clicked and dragged the selected lower toilet annotation.","intent":"Continue adjusting the annotation placement.","app":"Autodesk Revit","details":"The lower toilet note remains selected; system display and network state changed briefly during the interval."},{"start_s":33242.505,"end_s":33253.715,"action":"Dragged the selected toilet annotation across the plan toward the utility area, then clicked and middle-clicked, leaving the note selected in its new position.","intent":"Move the toilet room label to a clearer location.","app":"Autodesk Revit","details":"The selected note appears near the kitchen and wide utility area."},{"start_s":33253.715,"end_s":33264.325,"action":"Clicked and resized or repositioned the Revit view while editing the toilet note, then adjusted the view to show the kitchen, toilets, utility room, and corridor.","intent":"Inspect and finalize the annotation placement in the surrounding plan context.","app":"Autodesk Revit","details":"The view is panned or zoomed rightward; the upper toilet note remains selected."},{"start_s":33264.325,"end_s":33274.885,"action":"Dragged the Revit window and edited the selected room text, replacing the label with “KITCHEN.”","intent":"Rename the selected room annotation.","app":"Autodesk Revit","details":"Floor plan GL; the selected annotation is in the small room below the kitchen."},{"start_s":33274.885,"end_s":33284.519,"action":"Deleted and re-entered the room dimensions as “12'” while editing the KITCHEN annotation, then clicked away and briefly hid and restored the window.","intent":"Correct the kitchen room annotation dimensions.","app":"Autodesk Revit","details":"The annotation displays KITCHEN and 12'X8' after editing."},{"start_s":33284.519,"end_s":33294.529,"action":"Selected and dragged the KITCHEN annotation across the floor plan, then clicked the utility-room area and selected its existing room label.","intent":"Reposition the kitchen annotation and prepare another room label for editing.","app":"Autodesk Revit","details":"The view scrolls downward; the utility room and adjacent toilet labels become prominent."},{"start_s":33294.529,"end_s":33304.476,"action":"Selected the utility-room annotation and edited its text, entering “WIDE ” before the existing room name.","intent":"Rename the utility room annotation.","app":"Autodesk Revit","details":"The visible label becomes WIDE UTILITY."},{"start_s":33304.476,"end_s":33314.123,"action":"Completed the utility-room label as “WIDE UTILITY,” deleted and re-entered part of its dimensions, then clicked the annotation for further editing.","intent":"Correct the utility room name and dimensions.","app":"Autodesk Revit","details":"The annotation shows WIDE UTILITY with a partially edited dimension beginning with 5'."},{"start_s":33314.123,"end_s":33323.571,"action":"Dragged the WIDE UTILITY annotation, used middle-button navigation and scrolling to zoom out, and left the floor plan in a wider view with the annotation selected.","intent":"Reposition and review the updated room annotation in the overall plan.","app":"Autodesk Revit","details":"The final view shows most of the apartment floor plan, including the kitchen, toilets, utility room, bedrooms, lobby, and corridor."},{"start_s":33323.571,"end_s":33331.067,"action":"Clicked in the Revit floor plan and adjusted the view, shifting the visible area downward toward the kitchen, utility, and bedroom spaces.","intent":"Navigate the floor plan to inspect a lower portion of the layout.","app":"Autodesk Revit","details":null},{"start_s":33331.067,"end_s":33343.659,"action":"Clicked near the lower-right interface area; the Revit window briefly hid, reappeared, and moved while the floor plan remained visible.","intent":"Interact with the Revit window or view controls.","app":"Autodesk Revit","details":"No clear drawing change was visible."},{"start_s":33343.659,"end_s":33352.775,"action":"Selected the “WIDE UTILITY” text note and dragged it leftward and upward toward the balcony area, repositioning the annotation on the floor plan.","intent":"Reposition the utility-room text annotation.","app":"Autodesk Revit","details":"The text note remained selected in Modify | Text Notes mode."},{"start_s":33352.775,"end_s":33363.091,"action":"Continued dragging the selected “WIDE UTILITY” text note, then clicked nearby and entered rotation/edit interaction; pressed Escape and selected the underlying raster image.","intent":"Adjust the annotation placement or orientation against the floor-plan image.","app":"Autodesk Revit","details":"The final visible state showed the raster image selected and the utility note rotated near the balcony."},{"start_s":33363.091,"end_s":33372.132,"action":"Clicked the rotated “WIDE UTILITY” note, used Tab navigation, and dragged the selected text note within the balcony area.","intent":"Continue repositioning the utility-room annotation.","app":"Autodesk Revit","details":"The text note remained selected with blue grips visible."},{"start_s":33372.132,"end_s":33381.369,"action":"Finished dragging the “WIDE UTILITY” text note and clicked repeatedly near its right side while keeping the note selected.","intent":"Finalize or inspect the annotation position.","app":"Autodesk Revit","details":"The note stayed vertically oriented beside the wide balcony."},{"start_s":33381.369,"end_s":33390.619,"action":"Typed “BALCONY” into the active text note, then clicked the note in the floor plan.","intent":"Edit the selected floor-plan annotation.","app":"Autodesk Revit","details":"The text note remained selected in the balcony area."},{"start_s":33390.619,"end_s":33400.525,"action":"Dragged across the floor plan and clicked to manipulate the view, then zoomed out to display the full sheet.","intent":"Navigate and review the floor-plan layout.","app":"Autodesk Revit","details":"The view changed from a close-up apartment plan to the full sheet."},{"start_s":33400.525,"end_s":33410.393,"action":"Scrolled through the sheet to reposition the floor-plan view and clicked within the drawing.","intent":"Inspect another portion of the floor plan.","app":"Autodesk Revit","details":"The view moved across multiple apartment units and the central lobby."},{"start_s":33410.393,"end_s":33430.393,"action":"Left the floor plan displayed without further visible changes after a middle-click.","intent":"Pause while reviewing the drawing.","app":"Autodesk Revit","details":null},{"start_s":33430.393,"end_s":33447.45,"action":"Remained on the Revit floor plan while the desktop resumed and system status changed; a WhatsApp payment-reminder notification appeared, then clicked near the notification area.","intent":"Monitor the desktop while keeping the drawing open.","app":"Autodesk Revit","details":"The notification stated that a Meesho Pay Later bill of ₹150 was overdue by 1 day."},{"start_s":33447.45,"end_s":33452.71,"action":"Returned focus to Revit, scrolled and middle-clicked within the drawing to pan or zoom toward the apartment and lobby area.","intent":"Continue navigating the floor-plan view.","app":"Autodesk Revit","details":"The final view showed a closer section with the balcony, apartment rooms, lobby, stairs, and lifts."},{"start_s":33452.71,"end_s":33462.458,"action":"Panned the Revit floor plan slightly to reposition the bedroom, kitchen, utility, and corridor area.","intent":"Navigate the floor plan view.","app":"Autodesk Revit","details":null},{"start_s":33462.458,"end_s":33482.458,"action":"Panned the floor plan to bring more of the apartment layout and the labeled 3BHK area into view.","intent":"Review another portion of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":33482.458,"end_s":33492.236,"action":"Panned rightward across the plan, shifting focus from the apartment rooms to the lobby and stair area.","intent":"Navigate toward the lobby and circulation spaces.","app":"Autodesk Revit","details":null},{"start_s":33492.236,"end_s":33503.014,"action":"Scrolled and adjusted the view around the lobby, elevators, kitchen, and utility room, then selected the Wide Utility text note for editing.","intent":"Inspect and prepare the utility annotation for repositioning or editing.","app":"Autodesk Revit","details":"The Wide Utility note is selected and the interface enters text-note editing."},{"start_s":33503.014,"end_s":33514.598,"action":"Dragged the selected Wide Utility text note across the floor plan toward the corridor area.","intent":"Reposition the utility room annotation.","app":"Autodesk Revit","details":"The note is visibly being dragged from the utility room toward the corridor."},{"start_s":33514.598,"end_s":33524.952,"action":"Continued dragging the Wide Utility text note and released it near the corridor, leaving the moved note selected beside the original utility label.","intent":"Place the utility annotation in a new location.","app":"Autodesk Revit","details":"Two Wide Utility labels are visible, with the moved one positioned vertically in the corridor."},{"start_s":33524.952,"end_s":33536.116,"action":"Selected the vertical utility text note and edited its contents, deleting characters and entering dimension text.","intent":"Correct the utility-area annotation.","app":"Autodesk Revit","details":"Floor Plan: GL; text note editing remained active."},{"start_s":33536.116,"end_s":33546.664,"action":"Selected the vertical utility annotation, adjusted the text selection or position, and entered “COR” into the note.","intent":"Continue correcting the corridor/utility annotation.","app":"Autodesk Revit","details":"The note remained in text-edit mode on the floor plan."},{"start_s":33546.664,"end_s":33556.714,"action":"Completed the note text as “CORRIDOR,” then dragged and repositioned the annotation while navigating the plan.","intent":"Label the vertical passage as a corridor and place the note appropriately.","app":"Autodesk Revit","details":"The visible note reads “WIDE CORRIDOR” with a 6'6\" dimension."},{"start_s":33556.714,"end_s":33567.58,"action":"Exited the corridor-note edit context, navigated to another area of the plan, selected a raster image, and then selected the Lobby text note.","intent":"Move to and inspect another plan annotation.","app":"Autodesk Revit","details":"The view shifted to the lobby and surrounding rooms; the raster image was briefly selected."},{"start_s":33567.58,"end_s":33578.584,"action":"Zoomed and panned across the floor plan, then selected and repositioned the Lobby annotation near the central stair and lift area.","intent":"Place or review the Lobby label in the plan.","app":"Autodesk Revit","details":"The view ended around the central stair, lift, and adjacent corridor."},{"start_s":33578.584,"end_s":33598.584,"action":"Zoomed and panned to the central lobby and lift area, leaving the Lobby text note selected.","intent":"Review the lobby annotation and its surrounding layout.","app":"Autodesk Revit","details":"The selected note reads “LOBBY 3'10\"X15'6\"” near the lifts."},{"start_s":33598.584,"end_s":33608.194,"action":"Selected the lobby text note and entered text-edit mode, positioning the caret within the existing note.","intent":"Prepare the lobby annotation for editing.","app":"Autodesk Revit","details":"The note displayed “LOBBY” and a second line beginning with “10'X15'6”."},{"start_s":33608.194,"end_s":33618.895,"action":"Typed dimension text into the lobby note, entering “32'8\"X9'”, then clicked and dragged the note to reposition it over the floor plan.","intent":"Update the lobby annotation dimensions and placement.","app":"Autodesk Revit","details":"The edited note visibly showed “LOBBY” and “32'8\"X9'”."},{"start_s":33618.895,"end_s":33638.895,"action":"Dragged and selected the lobby note, then zoomed out and panned the floor plan to view its surrounding corridors, stairs, and lifts.","intent":"Review the updated annotation in the broader floor-plan context.","app":"Autodesk Revit","details":"The lobby note remained selected while the view changed to a wider plan overview."},{"start_s":33638.895,"end_s":33656.632,"action":"Panned the floor plan with the middle mouse button while keeping the lobby note selected.","intent":"Navigate to another area of the floor plan for continued annotation work.","app":"Autodesk Revit","details":"The wider plan view shifted to show additional rooms and circulation spaces."},{"start_s":33656.632,"end_s":33665.485,"action":"Panned and clicked around the floor plan, then selected a vertical text note near the corridor and dragged across the view to reposition it.","intent":"Select and adjust another floor-plan text annotation.","app":"Autodesk Revit","details":"A vertical corridor text note was highlighted near the right side of the plan."},{"start_s":33665.485,"end_s":33674.694,"action":"Pressed Escape, leaving the selected vertical text note visible on the floor plan.","intent":"Exit the current selection or editing operation.","app":"Autodesk Revit","details":"The plan remained open with the vertical note selected; no further text change was visible."},{"start_s":33674.694,"end_s":33684.606,"action":"Panned the Revit floor plan downward and slightly right using middle-button navigation.","intent":"Inspect a lower portion of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":33684.606,"end_s":33698.418,"action":"Continued panning the floor plan downward to review the lobby, stairs, electrical room, and adjacent rooms.","intent":"Inspect additional areas of the floor plan.","app":"Autodesk Revit","details":null},{"start_s":33698.418,"end_s":33708.688,"action":"Panned the plan further, then selected the raster image near the lobby; Revit switched to Raster Images modification mode and zoomed into the selected image.","intent":"Select and inspect the raster image overlay.","app":"Autodesk Revit","details":"The selected raster image is shown with image-editing controls and properties."},{"start_s":33708.688,"end_s":33718.83,"action":"Selected and dragged the lobby text note across the plan, repositioning it over the lift area, then entered text editing.","intent":"Reposition the lobby annotation and edit its content.","app":"Autodesk Revit","details":"The text note reads “LOBBY 32'8\"X9'” and is in Edit Text mode."},{"start_s":33718.83,"end_s":33727.993,"action":"Edited the text note by selecting the existing label and typing “GOOD S LIFT,” leaving the note in text-edit mode.","intent":"Replace the annotation title with a goods-lift label.","app":"Autodesk Revit","details":"The note temporarily displays partial text as the replacement is entered."},{"start_s":33727.993,"end_s":33738.616,"action":"Deleted the previous dimension text and typed replacement dimensions beginning with “7'6\"X10”.","intent":"Update the goods-lift annotation dimensions.","app":"Autodesk Revit","details":"The edited note visibly reads “GOODS LIFT 7'6\"X1” at the end of the span."},{"start_s":33738.616,"end_s":33748.702,"action":"Edited the selected Goods Lift text note, then dragged the note downward within the lift area and adjusted the view by scrolling.","intent":"Reposition the Goods Lift annotation on the floor plan.","app":"Autodesk Revit","details":"The selected note reads GOODS LIFT with dimensions 7'6\"X10'10\"."},{"start_s":33748.702,"end_s":33758.42,"action":"Scrolled to a row of lift symbols and selected the Lobby text note in the central area.","intent":"Locate and select a Lobby annotation for repositioning.","app":"Autodesk Revit","details":"The selected note reads LOBBY with dimensions 32'8\"X9'0\"."},{"start_s":33758.42,"end_s":33769.448,"action":"Dragged the selected Lobby text note from the central lobby area into the upper-left lift symbol and left it selected.","intent":"Move the Lobby annotation onto a lift symbol.","app":"Autodesk Revit","details":"The note is visibly positioned over the upper-left lift graphic."},{"start_s":33769.448,"end_s":33776.274,"action":"Continued dragging the selected Lobby note across the lift row and placed it over another lift symbol.","intent":"Duplicate or reposition the Lobby annotation across the lift row.","app":"Autodesk Revit","details":"Multiple Lobby labels are visible over adjacent lift symbols."},{"start_s":33776.274,"end_s":33796.274,"action":"Paused with the Lobby note selected over the rightmost visible lift symbol; no substantive interaction occurred.","intent":"Review the placement of the Lobby annotation.","app":"Autodesk Revit","details":"The floor plan remained unchanged during the stable interval."},{"start_s":33796.274,"end_s":33806.349,"action":"Scrolled and navigated to another row of lift symbols, then dragged the selected Lobby note within the left lift area and left it selected.","intent":"Reposition the Lobby annotation in another lift area.","app":"Autodesk Revit","details":"The final view shows the selected Lobby note above the left lift label."},{"start_s":33806.349,"end_s":33817.958,"action":"Typed “LIFT” into the active Revit text note, then pressed Backspace repeatedly to remove the existing second line content.","intent":"Edit the selected text note’s label.","app":"Autodesk Revit","details":"The note remained in text-edit mode and displayed “LIFT” with a blank line beneath it."},{"start_s":33817.958,"end_s":33827.932,"action":"Entered dimension characters and values, including 7, apostrophes, 6, and quotation marks, into the text note after “LIFT.”","intent":"Add the lift dimensions to the text note.","app":"Autodesk Revit","details":"The visible note showed “LIFT” and a partially entered dimension line."},{"start_s":33827.932,"end_s":33837.976,"action":"Finished entering the lift dimension text, clicked the note, and dragged its text box; Revit then switched selection to a raster image and the view shifted.","intent":"Position or adjust the lift annotation in the floor plan.","app":"Autodesk Revit","details":"The selected note showed “LIFT” with “7'6\"X7'6\"”; the later view displayed the raster image selection and a wider floor-plan area."},{"start_s":33837.976,"end_s":33848.362,"action":"Clicked through several visible room labels and text-note areas, selected a LOBBY note, and adjusted the view so the annotation remained selected.","intent":"Review or select nearby room annotations in the floor plan.","app":"Autodesk Revit","details":"The LOBBY label was highlighted in the final screenshot while multiple lift and lobby rooms remained visible."},{"start_s":33848.362,"end_s":33854.616,"action":"Clicked and middle-clicked around the floor plan, then selected a LOBBY text note at the right side of the view.","intent":"Inspect or select another room annotation.","app":"Autodesk Revit","details":"The final view showed the selected LOBBY note and several lift rooms."},{"start_s":33854.616,"end_s":33874.616,"action":"Remained idle while viewing the Revit floor plan with lift rooms and a LOBBY annotation visible.","intent":"Review the updated floor-plan annotations.","app":"Autodesk Revit","details":null},{"start_s":33874.616,"end_s":33893.405,"action":"Resumed in Autodesk Revit and clicked within the floor plan near the lobby and lift area.","intent":"Continue working in the Revit floor plan.","app":"Autodesk Revit","details":"The view showed multiple lifts labeled 7'6\" x 7'6\" and the lobby."},{"start_s":33893.405,"end_s":33903.258,"action":"Selected a lift text note and dragged across the plan, shifting the view while keeping the note selected.","intent":"Reposition or inspect the lift annotation.","app":"Autodesk Revit","details":"The selected text note displayed “LIFT 7'6\"x7'6\"” with text-note editing controls active."},{"start_s":33903.258,"end_s":33912.904,"action":"Selected and dragged the lift text note across adjacent lift locations, then zoomed out to show more of the floor plan.","intent":"Reposition the lift annotation and review its placement in context.","app":"Autodesk Revit","details":"The view expanded from the lift row to a broader floor-plan overview containing stairs, rooms, corridors, and the lobby."},{"start_s":33912.904,"end_s":33932.904,"action":"Scrolled and clicked around the lift row, shifting the plan to a closer view of the lifts beside the stair and exhaust shaft.","intent":"Inspect the lift annotation and surrounding plan area.","app":"Autodesk Revit","details":"A raster floor-plan underlay was visible, with the lift labels, stair, and exhaust shaft in view."},{"start_s":33932.904,"end_s":33942.84,"action":"Scrolled through the floor plan and clicked near the rightmost lift, leaving its text note selected.","intent":"Navigate to and select the rightmost lift annotation.","app":"Autodesk Revit","details":"The view moved across the lift row toward corridor marker 3 and adjacent rooms."},{"start_s":33942.84,"end_s":33953.029,"action":"Scrolled slightly and dragged within the selected lift text note, entering text-edit mode without a visible text change.","intent":"Edit or reposition the selected lift annotation.","app":"Autodesk Revit","details":"The note remained selected beside the staircase press shaft, PHE shaft, corridor marker 3, and bedroom."},{"start_s":33953.029,"end_s":33961.65,"action":"Dragged the selected lift text note across the floor plan and clicked to place it near the small lift and PHE shaft area.","intent":"Reposition the lift annotation on the plan.","app":"Autodesk Revit","details":"The lift note remained selected after placement."},{"start_s":33961.65,"end_s":33969.858,"action":"Selected and dragged the lift raster image/note to adjust its position, then zoomed or navigated the view around the lift and shaft.","intent":"Refine the lift annotation placement and inspect the surrounding plan.","app":"Autodesk Revit","details":"The selected boundary moved to a larger position around the lift area."},{"start_s":33969.858,"end_s":33980.143,"action":"Entered text-edit mode for the lift note and edited its visible text, leaving a large note reading “LIFT 7'6\"X7'6\"” over the plan.","intent":"Edit the lift annotation text.","app":"Autodesk Revit","details":"The note was actively being edited with the text-edit ribbon visible."},{"start_s":33980.143,"end_s":33990.471,"action":"Confirmed the text edit and used Backspace repeatedly to remove or revise characters in the selected lift note.","intent":"Correct the lift note content.","app":"Autodesk Revit","details":"The note remained in text-edit mode and displayed only “LIFT” during the edits."},{"start_s":33990.471,"end_s":34000.852,"action":"Typed “PHE SHAFT” into the note and pressed Enter to commit the text.","intent":"Label the annotation as a PHE shaft.","app":"Autodesk Revit","details":"The edited note visibly showed “PHE SHAFT” in large vertical text."},{"start_s":34000.852,"end_s":34008.485,"action":"Exited text editing, selected and dragged the edited note or raster element, then navigated the floor plan to a wider view showing the corridor and bedroom area.","intent":"Reposition and review the completed PHE shaft annotation.","app":"Autodesk Revit","details":"The final view showed the selected PHE SHAFT note near the lift, staircase, and corridor."},{"start_s":34008.485,"end_s":34018.211,"action":"Scrolled and dragged the selected text note on the GL floor plan, repositioning it near the stair and shaft labels.","intent":"Adjust the placement of a floor-plan annotation.","app":"Autodesk Revit","details":"Selected note text showed “STAIRCASE”/“SHAFT” content."},{"start_s":34018.211,"end_s":34027.584,"action":"Clicked the note repeatedly to enter text editing, then typed “STAIR” into the selected note.","intent":"Edit the floor-plan note label.","app":"Autodesk Revit","details":"The note displayed the entered text vertically as “STAIR” and “SHAFT”."},{"start_s":34027.584,"end_s":34036.578,"action":"Typed “CASE” to complete “STAIRCASE,” then selected and dragged the note on the plan.","intent":"Complete and reposition the stair-shaft annotation.","app":"Autodesk Revit","details":"The note visibly read “STAIRCASE” and “SHAFT” after editing."},{"start_s":34036.578,"end_s":34043.446,"action":"Clicked the selected note several times and entered text-edit mode, leaving the note selected for further editing.","intent":"Continue editing the annotation text.","app":"Autodesk Revit","details":"The visible note showed “STAIRCASE” and “SHAFT.”"},{"start_s":34043.446,"end_s":34059.695,"action":"Typed “PRESS .” into the active note text.","intent":"Add a press-shaft label to the floor-plan annotation.","app":"Autodesk Revit","details":"The note visibly displayed “STAIRCASE,” “PRESS SHAFT,” and “PRESS .” content during editing."},{"start_s":34059.695,"end_s":34070.983,"action":"Clicked and dragged the edited note to reposition it over the stair and press-shaft area, then clicked the plan.","intent":"Finalize the annotation placement on the floor plan.","app":"Autodesk Revit","details":"The selected note contained staircase, press-shaft, and press-shaft text and was moved across the shaft region."},{"start_s":34070.983,"end_s":34090.983,"action":"Switched to Autodesk Revit and selected a text note in the GL floor plan near the stair and pressurization shafts.","intent":"Select and inspect a floor-plan text note.","app":"Autodesk Revit","details":"The selected note displays text type 1.5MM in the Properties panel."},{"start_s":34090.983,"end_s":34100.499,"action":"Scrolled the GL floor plan slightly while keeping the selected text note and stair-shaft area in view.","intent":"Reposition the floor-plan view for editing.","app":"Autodesk Revit","details":null},{"start_s":34100.499,"end_s":34109.722,"action":"Dragged across the floor plan to reposition the view, then clicked around the stair and shaft annotations and scrolled to inspect the surrounding layout.","intent":"Navigate to the text annotations around the stair shafts.","app":"Autodesk Revit","details":"The view shifted to show the stair, corridor, bedroom, and drawing-room areas."},{"start_s":34109.722,"end_s":34119.69,"action":"Dragged within the plan, entered text-edit mode for a shaft note, and typed “LOBBY,” updating the visible annotation.","intent":"Rename the selected shaft or lobby annotation.","app":"Autodesk Revit","details":"The note visibly changed to LOBBY while retaining the PRESS. SHAFT text."},{"start_s":34119.69,"end_s":34129.902,"action":"Scrolled and navigated the plan, clicked the raster floor-plan image, and adjusted the view while the image selection and text-note editing context changed.","intent":"Reposition and inspect the underlying floor-plan image and annotations.","app":"Autodesk Revit","details":"The view zoomed out to show the lobby, corridor, bedroom, toilets, lifts, and drawing room."},{"start_s":34129.902,"end_s":34141.181,"action":"Dragged and scrolled the plan toward the upper shaft, selected its text note, and typed “FHC” into the annotation.","intent":"Label the upper shaft or fire-hose-cabinet annotation.","app":"Autodesk Revit","details":"The selected upper shaft note visibly includes FHC alongside the existing shaft text."},{"start_s":34141.181,"end_s":34150.803,"action":"Selected and repositioned a text note near the FHC shaft, then zoomed and panned outward to review the surrounding floor plan.","intent":"Adjust and inspect the annotation location in the Revit floor plan.","app":"Autodesk Revit","details":"The view changed from a close-up of the shaft and lobby to a wider apartment layout."},{"start_s":34150.803,"end_s":34160.004,"action":"Scrolled and panned across the floor plan, moving from the upper apartment area to a wider view showing multiple units and the central circulation core.","intent":"Review the broader floor-plan layout.","app":"Autodesk Revit","details":"The selected text note remained visible while the plan view moved and zoom level changed."},{"start_s":34160.004,"end_s":34169.484,"action":"Panned across the floor plan to inspect additional apartment units and the central stair and lift core.","intent":"Continue reviewing the floor-plan arrangement.","app":"Autodesk Revit","details":"The view ended on a broad central portion of the residential floor plan."},{"start_s":34169.484,"end_s":34178.412,"action":"Scrolled back toward the stair core, then selected and dragged the FHC shaft text note into position beside the stair and exhaust shaft.","intent":"Position the shaft annotation near the corresponding plan element.","app":"Autodesk Revit","details":"The view ended in a close-up of the stair, STP exhaust shaft, and adjacent shaft labels."},{"start_s":34178.412,"end_s":34189.513,"action":"Continued dragging and repositioning the selected FHC shaft text note within the stair-core area.","intent":"Refine the annotation placement and orientation.","app":"Autodesk Revit","details":"The note remained selected and was moved over the STP exhaust shaft region."},{"start_s":34189.513,"end_s":34199.735,"action":"Finished dragging the FHC shaft note, clicked to leave it selected, and pressed Tab while the close-up stair-core view remained open.","intent":"Finalize the text-note placement and selection state.","app":"Autodesk Revit","details":"The FHC SHAFT note was visible above the STP Exhaust Shaft; no text entry was shown."},{"start_s":34199.735,"end_s":34207.275,"action":"Waited in Autodesk Revit while the power source changed, then issued zero-distance scroll inputs that left the floor plan zoomed on the shaft and stair area.","intent":"Continue reviewing the floor plan around the shaft.","app":"Autodesk Revit","details":"The FHC SHAFT and STP Exhaust Shaft text note remained selected."},{"start_s":34207.275,"end_s":34226.036,"action":"Clicked and dragged across the selected text note, entered edit mode, and replaced its text with “STP” followed by “EXHAUST.” Returned to the plan with the edited note selected.","intent":"Edit the shaft annotation text.","app":"Autodesk Revit","details":"The visible note changed to stacked text reading STP EXHAUST SHAFT."},{"start_s":34226.036,"end_s":34234.306,"action":"Opened the text note Type Properties, changed the type/name to “1MM,” and edited the Text Size value to 1MM before confirming the dialog.","intent":"Adjust the text note type and size.","app":"Autodesk Revit","details":"Type Properties showed System Family: Text, type 1MM, with the Text Size field being edited."},{"start_s":34234.306,"end_s":34247.946,"action":"Returned to the floor plan, zoomed out, and activated the Place Lines tool. Drew or positioned a line near the stair and shaft area, then left the line command active after an escape input.","intent":"Add a line/detail element near the shaft and stair.","app":"Autodesk Revit","details":"The view showed temporary dimensions and a line preview on Level GL."},{"start_s":34247.946,"end_s":34256.981,"action":"Continued placing lines in the floor plan, selected the Hidden Lines line style, and positioned additional line geometry around the shaft and stair boundary. Issued escape to end the current placement.","intent":"Create or adjust hidden-line detailing around the shaft.","app":"Autodesk Revit","details":"The selected line style displayed as <Hidden Lines> and temporary geometry remained visible."},{"start_s":34256.981,"end_s":34267.445,"action":"Exited the remaining line command, used tab navigation and repeated scroll inputs to zoom out substantially, and middle-clicked in the plan. Ended on a wider floor-plan view showing multiple apartments, stairs, and lift cores.","intent":"Review the broader floor plan after editing the shaft detail.","app":"Autodesk Revit","details":"The final view was zoomed out from the stair/shaft area to the surrounding building layout."},{"start_s":34267.445,"end_s":34277.513,"action":"Scrolled around the Revit floor plan and clicked-dragged the view, bringing the lobby and adjacent rooms into focus.","intent":"Navigate the floor plan to a target annotation area.","app":"Autodesk Revit","details":null},{"start_s":34277.513,"end_s":34287.669,"action":"Continued dragging the floor plan and selected the lobby text note, opening it for text editing.","intent":"Edit the lobby room annotation.","app":"Autodesk Revit","details":"The LOBBY 10'X15'6\" note was selected in Modify | Text Notes mode."},{"start_s":34287.669,"end_s":34297.253,"action":"Replaced the selected note text by typing and correcting the wording, then entered a two-line label reading “ELECTRICAL ROOM.”","intent":"Rename the selected room annotation.","app":"Autodesk Revit","details":"The edited text appears as ELECTRICAL ROOM."},{"start_s":34297.253,"end_s":34307.367,"action":"Selected and dragged the ELECTRICAL ROOM text note to reposition it within the electrical room, then zoomed and panned around the plan.","intent":"Place the renamed annotation appropriately on the floor plan.","app":"Autodesk Revit","details":"The note remained selected while its position was adjusted."},{"start_s":34307.367,"end_s":34317.331,"action":"Panned and zoomed out across the floor plan, reviewed the broader layout, and dragged the view to another area near the central stairs and corridors.","intent":"Review the updated annotation in the surrounding plan context.","app":"Autodesk Revit","details":null},{"start_s":34317.331,"end_s":34326.911,"action":"Panned and zoomed into the stair and shaft area, selected a text note near the stair shaft, and adjusted the view to inspect it alongside the electrical room.","intent":"Navigate to and inspect another nearby floor-plan annotation.","app":"Autodesk Revit","details":"The selected note is visible near the stair shaft; no text change is shown."},{"start_s":34326.911,"end_s":34337.189,"action":"Selected a text note on the floor plan and dragged it to reposition it near the shaft labels, leaving the note in text-edit mode.","intent":"Reposition the selected floor-plan annotation.","app":"Autodesk Revit","details":"The selected note displays “PHE SHAFT”."},{"start_s":34337.189,"end_s":34347.533,"action":"Edited the selected text note to read “COMM.” and dragged it within the floor plan; then zoomed or panned to a wider view around the shafts and electrical room.","intent":"Rename and position the communication shaft annotation.","app":"Autodesk Revit","details":"The note visibly reads “COMM SHAFT” after editing."},{"start_s":34347.533,"end_s":34356.287,"action":"Exited the prior text edit, selected another shaft note, dragged it upward in the plan, and clicked within the note to continue editing.","intent":"Reposition and prepare another shaft annotation for editing.","app":"Autodesk Revit","details":"The selected note is associated with the PHE/FIC shaft area."},{"start_s":34356.287,"end_s":34365.787,"action":"Dragged the selected shaft text note and replaced its text with “FHC,” then continued editing the note with a numeric suffix.","intent":"Rename the shaft annotation to identify the FHC shaft.","app":"Autodesk Revit","details":"The note visibly reads “FHC SHAFT” during editing."},{"start_s":34365.787,"end_s":34379.91,"action":"Completed the shaft-note text as “FHC SHAFT.02,” selected and repositioned it, then panned or zoomed to another area of the floor plan showing the lobby and staircase press shafts.","intent":"Finalize the FHC shaft label and inspect nearby annotations.","app":"Autodesk Revit","details":"The view ends on the lobby, staircase press shaft, and corridor area."},{"start_s":34379.91,"end_s":34384.084,"action":"Switched back to the Revit window, exited text editing, selected a floor element near the staircase press shaft, and entered floor modification mode.","intent":"Select the floor element for modification.","app":"Autodesk Revit","details":"The selected element is a floor named “SHAFT”; the Modify | Floors tools are visible."},{"start_s":34384.084,"end_s":34400.176,"action":"Returned to the Revit GL floor plan, navigated and zoomed around the stair and electrical-room area, and selected the ELECTRICAL ROOM text note.","intent":"Inspect and reposition an annotation in the floor plan.","app":"Autodesk Revit","details":"The selected text note is visible near the stair and electrical room."},{"start_s":34400.176,"end_s":34409.321,"action":"Edited the selected room text note and typed “STAIRCASE.”","intent":"Rename the selected floor-plan annotation.","app":"Autodesk Revit","details":"Text-note editing mode remained active while the replacement text was entered."},{"start_s":34409.321,"end_s":34419.335,"action":"Completed the text edit so the note displayed “STAIRCASE PRESS. SHAFT,” then selected and dragged the note to reposition it near the stair press shaft.","intent":"Label and position the stair press shaft annotation.","app":"Autodesk Revit","details":"The updated note appears above the existing Staircase Press. Shaft room label."},{"start_s":34419.335,"end_s":34429.976,"action":"Exited the text-note interaction, zoomed and panned out across the GL floor plan, and entered “LI” in an active Revit input context.","intent":"Navigate the floor plan and begin another command or entry.","app":"Autodesk Revit","details":"The view changed from the local stair area to a broader floor-plan view."},{"start_s":34429.976,"end_s":34441.261,"action":"Activated Place Lines and drew a detail line around the Staircase Press. Shaft area, extending the line across the adjacent space.","intent":"Add linework to the floor-plan detail.","app":"Autodesk Revit","details":"Revit showed Modify | Place Lines with Hidden Lines selected; the line remained in placement mode."},{"start_s":34441.261,"end_s":34450.372,"action":"Scrolled and zoomed out over the floor plan, then opened the Manage Links command.","intent":"Review the broader plan and access linked-file management.","app":"Autodesk Revit","details":"The final view showed the Manage Links interface context while the floor plan remained visible."},{"start_s":34450.372,"end_s":34455.401,"action":"Resized the Revit window, clicked within Manage Links, and unloaded the selected linked image, changing its status from Loaded to Unloaded.","intent":"Unload a linked image from the Revit project.","app":"Autodesk Revit","details":"Manage Links displayed the linked image and the in-project 3D image."},{"start_s":34455.401,"end_s":34469.255,"action":"Returned to the Revit floor plan, scrolled and navigated the view, then selected a room; a Warning window appeared as the interval ended.","intent":"Inspect and navigate the GL floor plan.","app":"Autodesk Revit","details":"The floor plan showed rooms including bedrooms, drawing, kitchen, utility, and lift areas."},{"start_s":34469.255,"end_s":34476.028,"action":"Dismissed the warning and zoomed or panned the floor plan, leaving the view zoomed out to show multiple apartment areas.","intent":"Review the floor plan after the room warning.","app":"Autodesk Revit","details":"The warning stated that a room was deleted from all views but remained in the project."},{"start_s":34476.028,"end_s":34485.67,"action":"Opened Manage Links, selected the in-project 3D image entry, navigated briefly between Revit windows, and closed the dialog to return to the floor plan.","intent":"Review linked image entries and return to the project view.","app":"Autodesk Revit","details":"Manage Links showed the generated in-project image named 3D - 1."},{"start_s":34485.67,"end_s":34499.201,"action":"Navigated and zoomed the Revit floor plan through several scales, moving from a detailed apartment view to a zoomed-out overall plan.","intent":"Inspect different portions and scales of the GL floor plan.","app":"Autodesk Revit","details":"System notifications and memory pressure occurred during the navigation."},{"start_s":34499.201,"end_s":34509.324,"action":"Switched to File Explorer Home and waited for the contents to load, then scrolled through the OneDrive file list.","intent":"Browse files in the Home folder.","app":"Windows Explorer","details":"The visible list included documents such as ASSESSMENT 7, FORMAL LETTER, Internship_report, and ABSTRACT."},{"start_s":34509.324,"end_s":34520.033,"action":"Entered and refined “FINAL TITLE” in File Explorer’s search field, updating the search results, then clicked a result area.","intent":"Search Home for files matching “FINAL TITLE”.","app":"File Explorer","details":"Search results displayed matching files and folders."},{"start_s":34520.033,"end_s":34525.545,"action":"Switched to Revit’s FINAL TITLE BLOCK family editor and clicked Load into Project, opening the Load into Projects operation.","intent":"Load the title block family into a Revit project.","app":"Autodesk Revit","details":"The title block family sheet preview was visible before loading."},{"start_s":34525.545,"end_s":34531.133,"action":"Returned to PROJECT 11, dismissed a warning, and opened the Sheets context menu in the Project Browser, moving toward creating a new sheet.","intent":"Create or manage a sheet in the Revit project.","app":"Autodesk Revit","details":"The warning stated that the element could not be created in the current mode; the Sheets menu showed New Sheet."},{"start_s":34531.133,"end_s":34538.314,"action":"Selected New Sheet, opened sheet A101 - Unnamed, and adjusted the view while the sheet loaded.","intent":"Create and inspect a new Revit sheet.","app":"Autodesk Revit","details":"A101 - Unnamed appeared in the Project Browser and as the active sheet tab."},{"start_s":34538.314,"end_s":34546.872,"action":"Selected the sheet viewport and edited its scale field, entering 200; the viewport then displayed the floor plan at the changed scale.","intent":"Adjust the floor plan viewport scale on sheet A101.","app":"Autodesk Revit","details":"The selected viewport showed Floor Plan: GL and the scale changed from 100 to 200."},{"start_s":34546.872,"end_s":34557.0,"action":"Dragged the selected floor plan viewport to reposition it on sheet A101, then clicked and scrolled while leaving the viewport selected.","intent":"Position the floor plan viewport within the sheet layout.","app":"Autodesk Revit","details":"The viewport was outlined in cyan and moved within the sheet boundary."},{"start_s":34557.0,"end_s":34568.629,"action":"Scrolled repeatedly through the Revit sheet view, moving from a detailed floor-plan view to a zoomed-out sheet overview.","intent":"Review the sheet layout and overall floor-plan placement.","app":"Autodesk Revit","details":"Sheet A101 - Unnamed remained open."},{"start_s":34568.629,"end_s":34579.795,"action":"Changed the Revit window state and resized it several times; returned to the sheet view and clicked in the Project Browser near the floor-plan entries.","intent":"Manage the Revit window and select a project view.","app":"Autodesk Revit","details":"The sheet overview remained visible while the window was repositioned."},{"start_s":34579.795,"end_s":34595.384,"action":"Switched from the sheet to the GL floor plan, entered 100 in the View Scale field, and navigated the plan by scrolling and middle-clicking; then switched to the PDF Export window.","intent":"Set the floor-plan view scale and prepare or review PDF export.","app":"Autodesk Revit","details":"The GL floor plan displayed at scale 1:100 before the PDF Export window became active."},{"start_s":34595.384,"end_s":34606.991,"action":"Opened the PDF Export dialog and adjusted export settings, including the page size to ISO A4 and automatic orientation; clicked within the dialog and began interacting with the Export control.","intent":"Configure the current Revit view for PDF export.","app":"Autodesk Revit","details":"The dialog showed file name PROJECT 11, current-window export, fit-to-page, color, and vector processing options."},{"start_s":34606.991,"end_s":34611.25,"action":"Moved through the Save Settings and PDF Export windows, clicked to confirm the settings, and returned to the Revit floor-plan view.","intent":"Confirm PDF export settings and finish the export workflow.","app":"Autodesk Revit","details":"The PDF Export dialog remained visible until Revit became active again."},{"start_s":34611.25,"end_s":34621.131,"action":"Switched to File Explorer, opened the Documents folder under OneDrive, and displayed the file list while Revit transitioned to a Warning window in the background.","intent":"Check the Documents folder for the exported PDF or related project files.","app":"Windows File Explorer","details":"Documents listed multiple PDF, Revit, Word, and other project files."},{"start_s":34621.131,"end_s":34629.323,"action":"Switched from Revit through File Explorer to Chrome, opened the one-page PROJECT 11.pdf floor-plan document, and scrolled through it before returning toward Revit.","intent":"Review the PROJECT 11 reference floor plan.","app":"Google Chrome","details":"The PDF was displayed at changing zoom levels, ending with the Revit window preview visible on the taskbar."},{"start_s":34629.323,"end_s":34637.84,"action":"Returned to Revit, dismissed a warning window, and switched the PROJECT 11 view from the GL floor plan to the 3D View: {3D} tab.","intent":"Inspect the project model in a 3D view.","app":"Autodesk Revit","details":"The 3D view initially loaded with the model area blank, while the Project Browser remained visible."},{"start_s":34637.84,"end_s":34650.516,"action":"Navigated the Revit 3D view with repeated scroll actions, zooming from a distant whole-building view into a close view of interior rooms and walls.","intent":"Examine the building model geometry in detail.","app":"Autodesk Revit","details":"The 3D model changed from a small overview to a close-up orthographic view of rooms, doors, stairs, and walls."},{"start_s":34650.516,"end_s":34659.667,"action":"Continued viewing the Revit 3D model while the window briefly resized or refreshed, then left the model displayed in a wider overview with a lower-right element selected.","intent":"Review the overall 3D model and selected element.","app":"Autodesk Revit","details":"A brief control-key input and window resizing occurred; the final view showed the building overview and a cyan-highlighted lower-right linear element."}],"summary":"Developed the PROJECT 11 Revit architectural model from an imported floor-plan reference, modeling and refining walls, levels, doors, windows, floors, stairs, railings, furniture, fixtures, materials, annotations, and room layouts. Reviewed the project in plan and 3D views, configured sheet scaling, exported and reviewed a PDF, and inspected rendered/model outputs."}